工程集約を実現 ““““ 旋盤 旋盤ででで刻印で刻印 ......Enable to stamp on...
Transcript of 工程集約を実現 ““““ 旋盤 旋盤ででで刻印で刻印 ......Enable to stamp on...
Enable to stamp on deformable workpieces due to stamping
during processing
Quality improvement
Process integration・Reduce work-hours・Power saving・Automation・Low cost
工程集約を実現 ““““ 旋盤旋盤旋盤旋盤でででで刻印刻印刻印刻印 ”””” するツール
Press against workpiecesReturn to the start position automatically by springs
after stamping
※ Please contact us by e-mail for inquiries.
Marking System Division
YAMADA MACHINE TOOL CO.,LTD.
YAMADA Standard Typeface (H:W=2:1)
1-10-13, Uemine, Saitama-shi, Saitama, Japan 3380014
TEL +81-48-851-1122 FAX +81-48-851-1125
URL: http://www.yamada-mt.co.jp
E-Mail : [email protected]
● Standard specificationCharacter size : 1 to 4 mm Typeface of character ring : 【YAMADA font】
0-9, A-Z (capital letter), [―], [/], [.], [~] Length of stamping characters : Maximum 28 mmShank size : 20 mm square
● Options a-z (small letter), all characters of customer designated special font, logo, another symbols, etc.
Easy stamp replacing
Easy operation
Press against workpices,and stamp easily