UserguiderofFARFIAC750 - farfitech.com · BASON-API BASON-AP2 BASON-AP3 BASON-Guest Q ChinaNet...
5
User guider of FARFI AC750 1,Plug the extender unit into the socket where there is the wifi signal you want to boost. Press the key on the bottom of the unit at least 15 seconds, then it will be reset to factory setting. Replug it into the socket again. 2,Use your laptop to search the WiFi named "FARFI" 3,Open browser, and input 192.168.10.1, then get on the login interface, User name and Password are same: admin
Transcript of UserguiderofFARFIAC750 - farfitech.com · BASON-API BASON-AP2 BASON-AP3 BASON-Guest Q ChinaNet...
User guider of FARFI AC750
1,Plug the extender unit into the socket where there is the wifi signal you want to boost. Pressthe key on the bottom of the unit at least 15 seconds, then it will be reset to factory setting.Replug it into the socket again.2,Use your laptop to search the WiFi named "FARFI"
3,Open browser, and input 192.168.10.1, then get on the login interface, User name andPassword are same: admin
4,Select and click ‘repeater‘ mode, and wait a while for scanning the wireless signal around it
5,Select the wireless signal you want to extend such as ‘YINLIBO-5G’, edit the new 5.8G and 2.4GSSID name such as ‘FARFI-5G’ and ‘FARFI-2.4G’.For the ‘Pre-Shared Key:’ input the password of the router you want to boost and connect.
6,Search the WiFi signal again,you will find ‘FARFI-5G’ and ‘FARFI-2.4G’, Connect your device toFARFI-5G or FARFI-2.4G.
7,Finish
