Holy Cross College Assessment 2018 Yr 11 Industrial ... · Use workshop time to undertake guided...

8
Holy Cross College Assessment 2018 Yr 11 Industrial Technology Task 1 Assessment Task No: 1 Industry Study (pairs) DVD Rack (pairs) Date Issued Week 2 Term 1 Date Due: 7 May 2018 Weighting % 20 Total Marks Industry Study / 50 DVD Rack / 50 Total /100 SUBMISSION INSTRUCTIONS 1. HOW a. Electronic (PDF) Via HIVE (Report and Folio) b. Class submission (Practical) 2. WHEN ~ 7 May 2018 CONTEXT (OR PURPOSE) FOR THE TASK In this unit of work students are introduced to the basic WHS guidelines of the subject as well as the Industry Study component of the Preliminary HSC course. Students have learnt about skills in relation to the construction and finishing of different timber products, where they have been provided with the opportunity to develop further knowledge, understanding and skills that relate to the timber technology. TASK RUBRIC In your response to the Industry Study task and activities you will be assessed on how well you: Describe the organisation and management of an individual business within the focus area industry Identify appropriate equipment, production and manufacturing techniques, including new and developing technologies Apply research and problemsolving skills Use communication and information processing skills Identify the impact of one related industry on the social and physical environment Identify the impact of existing, new and emerging technologies of one related industry on society and the environment Work as part of a team scenario, to allocate and monitor team work practises. In your response to the DVD Rack you will be assessed on how well you: Reflect on information and discussions undertaken in class. Follow the set of drawing plans. Use workshop time to undertake guided construction of the project. Use class and home time to work on your folio. Page 1

Transcript of Holy Cross College Assessment 2018 Yr 11 Industrial ... · Use workshop time to undertake guided...

Holy Cross College Assessment 

2018 Yr 11 Industrial Technology Task 1 

     

 Assessment Task No:  1  Industry Study (pairs)  DVD Rack (pairs) 

 

Date Issued Week 2 Term 1 

Date Due: 7 May 2018 

Weighting % 20 

Total Marks Industry Study     / 50 DVD Rack           / 50 Total                    /100 

 SUBMISSION INSTRUCTIONS 

1. HOW a. Electronic (PDF) Via HIVE (Report and Folio) b. Class submission (Practical) 

 2. WHEN ~ 7 May 2018 

  CONTEXT (OR PURPOSE) FOR THE TASK 

In this unit of work students are introduced to the basic WHS guidelines of the subject as well as the Industry Study component of the Preliminary HSC course.  

Students have learnt about skills in relation to the construction and finishing of different timber products, where they have been provided with the opportunity to develop further knowledge, understanding and skills that relate to the timber technology.  TASK RUBRIC In your response to the Industry Study task and activities you will be assessed on how well you:  

 ● Describe the organisation and management of an individual business within the focus area industry ● Identify appropriate equipment, production and manufacturing techniques, including new and 

developing technologies ● Apply research and problem­solving skills  ● Use communication and information processing skills ● Identify the impact of one related industry on the social and physical environment  ● Identify the impact of existing, new and emerging technologies of one related industry on society and the 

environment ● Work as part of a team scenario, to allocate and monitor team work practises.  

 In your response to the DVD Rack you will be assessed on how well you:  

● Reflect on information and discussions undertaken in class.  ● Follow the set of drawing plans.  ● Use workshop time to undertake guided construction of the project. ● Use class and home time to work on your folio. 

        

Page 1  

OUTCOMES BEING ASSESSED, GENERAL CAPABILITIES  & CROSS CURRICULUM PRIORITIES P1.1 describes the organisation and management of an individual business within the focus area industry 

P1.2 identifies appropriate equipment, production and manufacturing techniques, including new and   

              developing technologies 

P2.1    describes and uses safe working practices and correct workshop equipment maintenance techniques P2.2    works effectively in team situations P3.1    sketches, produces and interprets drawings in the production of projects P3.2 applies research and problem­solving skills  

P4.3    identifies and explains the properties and characteristics of materials/components through the production of                  projects P5.1 uses communication and information processing skills 

P5.2    uses appropriate documentation techniques related to the management of projects P6.1        identifies the characteristics of quality manufactured products  P6.2        identifies and explains the principles of quality and quality control  P7.1 identifies the impact of one related industry on the social and physical environment  

P7.2 identifies the impact of existing, new and emerging technologies of one related industry on society  

              and the environment  

    

Page 2  

 THE TASK 

 Industry Study (In pairs)  

● Examine, in detail, a company associated with the Timber and Furniture Industry in your local community 

(within NSW).  A variety of questions will be posed that require the student to interact with the company to 

discover its management structure and position in the local and global economy. 

 

● Fields or areas to study could include: 

­ Timber forestry 

­ Specialised Timber suppliers (not Bunnings, Mitre 10, Canterbury Timber) 

­ Cabinet making 

­ Kitchen Manufacturers 

­ Builders (in the context of timber use, i.e. who use timber for framing) 

­ Timber furniture producers (must be locally produced) 

 

● Companies that produce their products overseas are not to be included in this study.  

● You group is required to visit the worksite to obtain the information, and present a single, written report. 

 

DELIVERABLES: One industry study that addresses the following: 

 

 

STRUCTURAL FACTORS 

1. Company name 

2. Location 

3. Name of contact and position (Job description) 

4. Background of Company/History/What they produce 

5. The overall organisational structure (management structure and titles of employees­ not individual names) of 

the business.  Use flow chart to describe hierarchy in workplace. 

6. How is the product marketed/sold to the consumer? 

7. Who is the end user of the product (Individual, company, government, etc)? 

 

TECHNICAL FACTORS 

1. List any notable pieces of machinery/equipment that the company uses to continue its day to day 

production/manufacture. E.g. CNC Router, jointer, etc and describe its purpose. Photos must be included. 

 

ENVIRONMENTAL AND SOCIOLOGICAL FACTORS  

1. List the materials (i.e. types of timber) utilised in the products they sell. 

2. Does the company participate in any recycling programme? Describe in detail (if not implemented, suggest a 

recycling programme giving details of the process undertaken). 

 

PERSONNEL ISSUES 

1.  What Union are the employees associated with? (Provide background information on the union and its role in 

the workplace). If employees are not members, suggest what Union they could be in and its role in the 

workplace. 

 

Page 3  

 

ADDITIONAL QUESTIONS: 

1.  Define the term “Quality Control.”  Does the company have a quality control process for produced   

     products? Explain in detail, (if not implemented, suggest a quality control process that could be  

     used within the company).   

2.  What is an “Environmental Impact Statement?” 

3.  Define the term ‘Industrial Relations’? 

 

THE TASK 

Group Folio and Games Rack 

SITUATION: Most modern gaming systems use a CD/DVD style of input device to store and upload games into a console hard drive. However, the need to purchase a physical disk is still common, and is the preferred method of purchase for most consumers.   

BRIEF: In pairs, you are to design and create 2 identical CD/DVD Racks (Hold approximately 20 DVD/Blu­ray gaming cases).    Per student, you will be supplied with: 

­ Combined total of 4m timber (90 x 19 Hoop Pine) or 2m (190x19)  DELIVERABLES: One design folio (one between two students) ­ PDF via HIVE Two identical DVD/Blu­ray gaming Racks (one per student) 

 

ADDITIONAL TASK INFORMATION 

FOLIO REQUIREMENTS (one folio per group of 2)  

● Title Page ● Contents Page ● Project Introduction 

○ Clarify the intent of the project by explaining clearly what is to be constructed and why ● Project Management 

○ Action Time plan ● Project Research 

○ Joinery (Box pin joint, dovetail joint, biscuit joint, rebated butt joint, butt joint) ○ Timber (Hoop Pine) ○ Tools (router, tenon saw, chisel, mallet, disc sander, linisher, table saw) ○ Abrasive paper (different types of abrasive paper to be used) ○ Finishes (water based lacquer) 

● Concept Development ○ 4 x A4 Pages annotated concept sketches 

● Final Drawing ○ A4 orthogonal drawing of final product including dimensions  ○  Must be CAD drawings produced through Solid Edge. 

● Steps of Construction ○ Step by step outline of the process undertaken from start to finish 

● Evaluation ○ Each student is to undertake a separate evaluation of the project, their own performance and that of 

their partner. ● Bibliography 

          Page restrictions: 40­60 pages 

Page 4  

 MARKING CRITERIA  (Industry Study)  

Outcome  Criteria Descriptor 

Poor  Elementary  Satisfactory  Good  Very Good  Excellent 

P5.1 uses communication and information processing skills  

Cover page with logo of company, student number and teacher name. Contents, Professional Presentation & Appendix. 

0  1 

Incomplete area, with minimal 

content and detail. 2 

3  4 

Typed, formatted, presentation. Appendix with relevant info.  

 5 

P1.1 describes the organisation and management of an individual business within the focus area industry 

Structural factors all addressed.  0  1 

Areas from Structural factors are incomplete or not in detail.  2 

3  4 

All Structural factors are 

included. With a deep 

understanding of content.  

P1.1 describes the organisation and management of an individual business within the focus area industry 

Company background is detailed, including hierarchy flow chart. 

0  1 

Flow chart minimal in content. 

3  4 

Flow chart demonstrates detailed 

knowledge of organisation.  

P1.2 identifies appropriate equipment, production and manufacturing techniques, including new and developing technologies P7.2 identifies the impact of existing, new and emerging technologies of one related industry on society and the environment 

 All Technical Factors are addressed.  Machinery is listed, with photos & description of use.  

0  1 

Minimal photos, with 

basic description. 

3  4 

All Technical Deliverables are included. With a 

deep understanding of 

content. Photos with detailed 

description included 

P7.1 identifies the impact of one related industry on the social and physical environment 

All Environmental & Sociological factors are addressed.  

0  1 

Areas from Environ & Socio 

factors are incomplete or not in detail. 2 

3  4 

All Environmental & Sociological issues are 

addressed. With a detailed 

understanding of content. 

P1.1 describes the organisation and management of an individual business within the focus area industry 

All Personnel Issues are addressed.  0  1 

Areas from Personnel factors are incomplete or not in detail. 2 

3  4 

All Personnel issues are 

addressed. With a detailed 

understanding of content. 

P6.1 identifies the characteristics of quality manufactured products  P6.2 identifies and explains the principles of quality and quality control  

Quality Control is defined and related to industry study. 

0  1 

Quality control is stated in 

basic terms, with 

minimal  procedures. 

3  4 

Detailed definition of Quality Control 

and clear documentation of related procedures.  

Page 5  

P7.1 identifies the impact of one related industry on the social and physical environment 

Contents of an 

Environmental Impact 

Statement is outlined. 

0  1 

EIS is 

outlined  in 

basic terms 

3  4 

EIS is outlined 

clearly and 

discussed in 

relation to related 

business  

P1.1 describes the organisation and management of an individual business within the focus area industry 

Industrial Relations is 

defined and related to 

industry study 

0  1 

IR is 

outlined  in 

basic terms 

3  4 

IR is outlined 

clearly and 

discussed in 

relation to related 

business  

P1.1 describes the organisation and management of an individual business within the focus area industry 

Explanation of E.E.O. 

and its impact on the 

timber and furniture 

industry 

0  1 

EEO is 

outlined  in 

basic terms 

3  4 

EEO is outlined 

clearly and 

discussed in 

relation to related 

business  

 

 

Total: __________/ 50 

 

 

 

Page 6  

 MARKING CRITERIA  DVD Rack Folio (Groups)  

Outcome  Criteria 

Descriptor 

Non 

Attempt Elementary  Satisfactory  Good 

Very 

Good Excellent 

P5.2  Cover page with 

logo, student 

number and teacher 

name, Contents, 

professional 

presentation. 

0  1 

Incomplete 

area, with 

minimal 

content and 

detail. 

3  4 

Typed, 

formatted, 

presentation. 

Content with 

relevant info. 

P4.3 

 

Every component of 

the folio outline is 

documented. 

0  1 

Folio is 

incomplete in 

areas, basic 

documentation. 

3  4 

Folio is 

holistic in 

completion 

and provides 

detail in each 

major area. 

P3.1  Sketching and idea 

generation clearly 

conveys ideas and 

project realisation. 

 

CAD 

0  1 

Idea 

generations 

lack detail and 

provide 

minimal 

information. 

3  4 

Idea 

generations are 

documented 

extensively 

and presented 

professionally. 

Use of CAD  

P3.2  Research is 

documented from an 

extensive range of 

areas. Selection and 

justification of 

appropriate 

materials, processes 

and resources. 

0  1 

Research is 

basic on a 

limited range 

of areas. 

Justification is 

incomplete and 

lacking detail.   

3  4 

Research is 

thoroughly 

documented on 

a variety of 

areas. 

Justification is 

extensive in all 

headings.  

P2.2  Ongoing evaluation 

of the project and its 

relationship to the 

statement of 

Intent. 

 

Final evaluation 

accurately depicts 

process undertaken. 

0  1 

Evaluation is 

limited in 

linking its 

relationship 

with the 

statement. 

Basic ongoing 

evaluations 

utilised 

throughout the 

folio. 

3  4 

 

Evaluation is 

directly linked 

to statement of 

intent. 

Extensive 

evaluation 

processes are 

utilised 

throughout 

folio.  

 

 

  

 Total _______/ 25 

    

 

Page 7  

MARKING CRITERIA  Practical Mark (Individual)   

 

Outcome  Criteria Descriptor 

Non 

Attempt Elementary  Satisfactory  Good  Very Good  Excellent 

P2.1 

Projects are identical in size, construction, colour and finish.  

0  1 

Tolerance of 10mm. 

Projects have a noticeable difference. 

3  4 

Tolerance of 5mm. 

Projects are identical in construction

. 5 

P2.1 

Project is square and houses the DVD Cases comfortably. 

0  1 

DVD does not fit 

comfortably in all housing areas. Parts of the job are square. 

3  4 

Projects angles are square and DVD Case fits easily. 

P2.1 

Correct joinery methods are used and are well constructed.  

0  1 

Joinery is substandard in construction and is not 

fitted tightly. 2 

3  4 

Joinery is well housed 

and provides strong  5 

P2.1 

DVD projects are identical to final production and working drawings. 

0  1 Tolerance of 20mm. 

 3  4 

Tolerance of 5mm. 5 

P2.1 

Finish is free of imperfections, scratches and brush strokes 

0  1 

Minor surface scratches and brush strokes. Minor surface preparation.  

3  4 

Clean finish, with considerable preparation of surfaces. 

5     

Total _______/ 25    

 

Industry Study  Group Folio  Individual Practical  Total 

/ 50  / 25  / 25  / 100 

       

 

Page 8