Emicol Capability Brochure

7/27/2019 Emicol Capability Brochure

1/66

Engineering and Manufacturing Industry Cooperative Limited

Working Cooperatively to get the Job Done

Capability Brochure

Engineering and

Manufacturing IndustryCooperative Ltd

EMICoL

PO BOX 1780

Malaga WA 6944

Tel:(08) 9249 3444

Fax: (08) 9249 3573

Email:[email protected]

Web:www.emicol.com.au


2/66



Section 4

COMPANY OVERVIEWCompany Overview

Index

Description PageIntroduction Section 1Group Summary Section 2Group Clients Section 3Company Overviews A - Z Section 4

Company Name

Avtech Engineering Member

Bohler Uddeholm SponsorChallenge Chemicals Aust MemberCVR Crushing MemberDiverse Engineering MemberGoodwill Engineering MemberGrundfos Pumps MemberInter-Steel MemberKingston DNA MemberLightspeed Communications MemberMatchTech Services MemberPanther Powdercoating MemberPedco Engineering Member

Pirtek Malaga MemberPrecision Jobbing MemberPrecision Sheet Metal MemberPrimary Sales MemberPrime Motion and Control MemberProject Industries MemberSouthern Wire MemberSushi Digital SponsorSwan Chamber of Commerce MemberVerriers Engineering Services MemberWallis Drilling MemberWest Coast Fasteners MemberWritewell Systems Member

Summarised Group Contacts

CNC and Manual Machining ServicesGeneral Fabrication and Welding ServicesProject Management Engineering and DraftingSheet Metal, Fabrication, Cutting, Rolling and Bending ServicesSuppliers of Parts and AccessoriesProviders of benecial support and services to EMICoL members

Site ServicesSponsors of our EMICoL Cooperative

Thinking of Joining? Section 6

}Section 5

Index




3/66

Tech - Spec



Introduction

Members ofEMICoL, the Engineering and Manufacturing Industry Cooperative Limited have worked

in partnership in producing this document of their resources.

EMICoL represents a cooperative cluster group of industries predominantly made up of small to

medium businesses in the manufacturing, engineering, mining and fabrication sectors of industry.

The quality goods produced for their clients either individually or collaboratively is testament to the

capability within the group.

EMICoL members are very keen to provide their clients with service and products that match the

requirements of Australian and International standards.

The EMICoL cooperative is in place as a conduit between the needs of industry and the capabilitiesof its members. EMICoL has prepared this brochure as a tool for industry that will provide the user

with a detailed introduction to each EMICoL Member.

This Capability Brochure captures the individual capabilities of each member organisation, sponsor

or supplier and provides the end user with an opportunity to pursue a working relationship with a

single EMICoL company or group of EMICoL companies to meet project needs.

The formation of EMICoL serves to enrich the commercial capabilities of its members through

building networks, seeking commercial opportunities, sharing resources, and developing EMICoL into

a reputa-Working Cooperatively to Get the Job Done

Section 1


4/66

COMPANY OVERVIEW



Section 4

Company Overview

Group Summary

WORKSHOP SPACE

36,000 Square metres of under cover area

30,000 Square metres of yard space

WEEKLY FABRICATION CAPACITY

2,500 Boiler making hours

400 Sheet metal hours

1,250 Fitting hours

2,700 Machining hours

100 Electrical hours

WEEKLY ENGINEERING CAPACITY

700 hours (covering mechanical, structural and civil engineering and design, CAD/CAM and nite

engi-neering analysis)

WEEKLY PROJECT MANAGEMENT CAPACITY

350 Project management hours

Consulting, training and business development services available

QUALITY ASSURANCE

Members accredited to ISO 9001: 2008.

SAFETY MANAGEMENT

Members accredited to AS/NZS 4801-2001

ENVIRONMETAL MANAGEMENT SYSTEMS

Members accredited to ISO 14001:2004


5/66

Tech - Spec



Group Clients


6/66



Section 4Engineering and Manufacturing Industry Cooperative Limited

See the Tech Spec. over the page for detailed capablities Section 4

Avtech Engineering

6 Wildon Street

Bellevue WA 6056

Tel: (08) 9274 4122

Fax: (08) 9274 5012

Email: [email protected]

www.avtech-eng.com.au

Avtech Engineering

Satisfying the customers requirementsby producing quality parts



Section 4

Capability Statement

Avtech has been in the precision manufacturing business since 1979, specialising inmachining precision components for a diverse range of industries.

We continually invest in the latest in CNC machining technology, including a largeselection of high-tech machine tools for your precision component manufacturing.

The majority of our lathes have live milling spindles on the turret, enabling them tocomplete a component in one operation, preventing multiple setups and at the sametime, providing a cost saving benet for our customers.

Many of our CNC lathes are equipped with automatic bar feeders, allowing us to machinelarger batch quantities unattended, producing high volume machining with low labourinputs. Our machining centres have a rotary 4th axis, with one having an extra tilting 5thaxis for more complex machining.

Our machining capability is supported by the programming department that utilises the

latest 3D CAD/CAM and 3D modelling software.

We can assist with design or provide improvement for your product with Solidworksmodelling. We also offer complete turn-key solutions to take your ideas from concept tothe manufactured component.Our quality is backed up when required using a CMM measurement.

Our customers needs come rst and we can manufacture their components in batchquantities of one or two, to batches of larger quantities.


7/66



TECH - SPEC

PRODUCTS

The Oil & Gas Industry

Various components for exploration, production and

recovery tools, requiring that specic materials be used

when manufacturing their components.

Hydraulics Industry

Cylinders, rams, manifolds and valve blocks

Mechatronics/Electronics Industry

Cases, standoffs, brackets, chassis and electro-

mechanical components.

Mining Industry

Tools to support exploration & drilling areas from down

the hole equipment to surveying tools.

Materials

We have extensive experience in machining high strength alloy steels, aluminium, brass/bronze, cast iron,

inconel, nickel, various plastics, stainless steels, exotic materials, steel & titanium for a variety of local & overseasindustries, who rely on consistent, high quality precision components manufactured on time, every time.

We manufacture components for local and international manufacturers of CNC machinery.

CAPABILITY AND SERVICES

7 x CNC turning CCentres ~ 5 with milling

CNC mill/turn ~ 2~65 dia. bar feed

CNC mill/turn ~ 2 x 350mm dia. x 950mm long chucking3 x CNC machining centres

CNC milling (max XYZ) ~ 4 & 5 axis ~ 1,050 x 560 x 810

Okuma LT10 MYB ~ 7 axis twin chuck, twin turret both with live tooling, and one with Y axis - 50mm barfeed

Okuma LU15 MY ~ 5 axis single chuck, twin turret, one with live tooling, and Y axis-65mm barfeed

Mazak Integrex 200Y ~ 5 axis mill/turn centre

Mazak SQT/M ~ 250M single chuck, single turret with live tooling-65mm barfeed

Hardinge T42 ~ 2 axis lathe 50mm bar feed

Hardinge GT ~ 2 axis gang style tooling-27mm bar feed

Hardinge GT ~ 3 axis gang style tooling-27mm bar feed

Okuma MB56 ~ 4 Aais ~ Max spindle speed 15,000RPM, through tool coolant + 1 metre x travel

Okuma MX45 ~ 5 axis ~ max spindle speed 8,000RPM

Mori Seiki MV40 ~ 3 axis

Brown & Sharp ~ CMM x x

Camworks




8/66

Section 4



Bohler Uddeholm (Australia) Pty Ltd

23-33 Gauge Circuit

Canning Vale WA 6155

Tel: (08) 9455 8672

Fax: (08) 9455 8673


www.buau.com.au

Bohler UddeholmFor high performance metals

Section 4

Capability StatementMission Statement

To offer the best possible service and commitment to our customers every single day. To establish long term partnerships with our customers. To ensure that our customers remain the centre of our attention. To remain the leaders in quality. To continue to regard our employees as our key asset. To work together to achieve success. To guarantee the highest standards of quality.

Customer Care Commitment

You will receive friendly, courteous, prompt and efcient service at all times. We value the business that our customers provide. Our aim is to provide you with the products and service that enables us to add value

to your business. We will conduct our business with absolute honesty and integrity. Our aim is to deliver our products to you when promised. We will communicate openly. We welcome any comments you may have which will improve our service. Our sales people are trained and determined in ensuring that your dealings with

our company meet your expectations. Our staff are committed in following these customer care guidelines at all times.


9/66



PRODUCTS

Tool steel Hollow bar

Cold work Chrome bar

Hot work Tube

Plastic mould steel Miscellaneous

High speed steel Ground at stock

Alloy steel High speed steel tool bits/carbide

Case hardening Forgings

High tensile Manganese

Nitriding Proles

Mild steel Key steel

Stainless steel Knives

Non ferrous Silver steel

Aluminium Fittings

Cast iron Bronze

Copper Brass

CAPABILITIES & SERVICES

Cutting: 100 band saws in operation - vertical saws that can cut 1,250mm x 1,250mm x 3,600mm long to 260mm

band saws.

Machining: Grinder with a capacity of 750mm x 500mm and two milling machines, the largest having a capacity

of 2,600mm x 720mm.

Heat Treating: Our production mills in Austria and Sweden are equipped with state-of-the-art heat treatment

facilities. Details on heat treatment can be found in the various product information brochures and in support

information. For information on local heat treatment please contact your local branch.

Logistics: Before any product can be accepted into our stores, goods must have been checked against the

paperwork for conformance. With over 11,000 line items, our stores are organised to ensure prompt accurate

delivery, with corresponding paperwork and full product traceability. Customers will be advised as soon as it

becomes evident if delivery within 24 hours cannot be met.

Charts and Support Information

TECH - SPEC


10/66

Section 4Section 4



Capability StatementChallenge Chemicals Aust was established in Kwinana Beach over 28 years ago by a group of people who wished tomake a difference to the chemical industry.

Challenge Chemicals Aust is a priivately owned, totally Australian business with distributors throughout Australia.

The business has developed and grown from it humble beginnings to being a major supplier in the mining and generalindustry, hospitality, food processing, transport, laundry, and water treatment sectors, as well as supplying specialtychemicals sold under brand names. The manufacturing plant, warehouse, distribution and administration are situatedin Kwinana Beach.

Challenge Chemicals Aust

6 Butcher Street

Kwinana Beach WA 6167

Tel: (08) 9419 5577

Fax: (08) 9419 4958


www.challengechemicals.com.au

Challenge Chemicals AustService with products for technology


11/66



PRODUCTS

Automotive Beer line/glass cleaners

Carpet treatment Food processing

Hand & Body House keeping

Industrial Kitchen

Laundry Marine

Mining Miscellaneous

New products Paper products

Sundry products Vinyl/wood oor treatmentsWater treatment


QUALITY: Quality and continuous improvements are hallmarks of Challenge Chemicals Aust operations, and

great pride is held in the fact that we are certied to ISO 9001:2000.

TECHNICAL EXPERIENCE: Challenge Chemicals Aust provide technical expertise which delivers the best result

for our customers through the knowledge of our experienced people. We constantly research and develop our

products to stay abreast of new developments and technologies.

ENVIRONMENT:Challenge Chemicals Aust considers the environment in which we live and work as a priority,

and are able to provide businesses with local support along with the latest technology and the changes

associated with the methods and use of chemicals.

CUSTOMER SERVICE:By taking time to know and understand every customers business and their unique

requirements, Challenge Chemicals Aust have built long term relationships though consistent professional and

effective customer service.

COMMITMENT: Challenge Chemicals Aust is committed to working to provide the most innovative and

environmentally sound chemistry, together with the best people who know how to apply it.

TECH - SPEC


12/66

Section 4



CVR CrushingThe specialist in impact crushers, parts andgeneral engineering

Capability StatementCVR Crushing Equipment was established in 1993 and is a privately owned Australiancompany. Our extensive workshop is located in Bayswater industrial area.

Directors have drawn on their 55 years of experience in the processing, mining andmechanical fabrication industries to design and fabricate a whole series of impactcrushers. We also manufacture in-house a wide variety of spare parts for crushingequipment items.

We also specialise in general engineering, fabrication and machining. With our varietyof equipment and qualied personnel we can manufacture those small precision typecomponents right through to machining or fabricating large items for your project.

CVR Crushing Equipment has built its success on business by focusing on our customersneeds backed by the commitment to supply a quality product on time every time.

When you do business with our company, you are guaranteed that the level of service,quality and price competitiveness is second to none. At CVR, not only do we believe thatour clients are one of our greatest

CVR Crushing Equipment

2 Mooney Street

Bayswater, WA 6053

Tel: (08) 9370 2267

Fax: (08) 9371 6607

Email:[email protected]

www.cvrcrushingequipment.com.au

Section 4


13/66



PRODUCTS

Construction and mining material handling equipment

Custom designed and standard vertical and horizontal impact crusher series

Range of 15 impact crushers in both the horizontal and vertical feed styles that will suit most

requirements. For design range capacity of impact crushers and feeders check out our website,

www.cvrcrushingequipment.com.au

Spare Parts

We supply the general crushing and mining industry with spare parts for all types of jaw crushers, cone crushers,

ball and hammer mills, screening units, conveyors, feeders, mobile and xed crushing units. We also supply a huge

quantity of conveyor pulleys (lagged and none-lagged) to the crushing and mining Industries.

General Engineering

We supply the domestic industry with a large selection of machines and sub-assemblies along with pins, bushes,

shafts, bearing housings, pump repairs, replacement wear parts, hydraulic cylinders as well as repairs and

maintenance to all facets of equipment.Mobile and xed machinery repairs carried out to customers specications.

We have approximately 2,000sq metres under-roof in separate fabrication and machining workshops.

CAPABILITIES AND SERVICESGeneral Fabrication Capabilities

Full fabrication and boiler maker capabilities able of handling individual works up to 10 tonne each. We also

perform submerged arc welding, standard prole cutting, plasma cutting and laser cutting.

General Machining Capabilities

We are able to handle standard turning projects up to 5.2m in length at a diameter of 1,250mm, along with those

minor projects on our smaller machines.We have are a range of CNC machines including lathes and machining

centres that are capable of operating 24 hours a day. Our machining workshop also contains horizontal and vertical

milling machines, a 2.5m vertical borer, radial arm drills, surface grinding machines, manual lathes.

TECH - SPEC


14/66

Section 4



Diverse EngineeringQuality service since 1986

Diverse Engineering66 Stebbing Road

Maddington WA 6109Tel: (08) 9493 0855

Fax: (08) 9493 0866Email: [email protected]

www.diversewa.com.au

Section 4


Diverse Engineering is a proudly Western Australian owned and operated,multi-disciplined engineering company that provides an array of services to theenergy, industrial, oil and gas, marine, mining and transport sectors.

Established in 1986, Diverse Engineering has developed an enviable reputationfor consistently delivering quality, cost effective engineering services to ourclients.

Diverse Engineering relocated to new premises in Maddington in 2006, allowingthe administration, machining, fabrication and mechanical departments tooperate from one location.

By designing innovative solutions, providing exceptional turnaround times andquality workmanship, Diverse Engineering has established itself as a reliablebusiness partner with a wide spectrum of small and large clients, including

several market leading original equipment manufacturers.

Marine division experienced signicant growth due to the acquisition of BJMarine in 2009 and since then, becoming agents for Yanmar, Steyr and theBarnacle Buster product range.

The success of the business is driven by our talented management team whoensure each division of Diverse Engineering operates under those same corevalues of quality, integrity and reliability.

Our professional, technical and trades personnel cover a broad range ofdisciplines, which gives Diverse Engineering the operational capacity toundertake complex, large scale projects.

Today, Diverse Engineerings commitment to deliver outstanding service to

every client remains as strong as it was in 1986.


15/66



PRODUCTS

Machining

Re-babbitt of white metal bearings, seals and thrust

pads.Manufacturing of turbine bearings and labyrinth seals.

Manufacture of governor valve spindles, sleeves and

bushes.

Repairs and machining of large wheel motor hubs.

Hydraulic cylinder repair, design and manufacture.

Machine tool repairs and parts manufacture.

High pressure pump repairs and parts manufac-ture.

Earth moving equipment spare parts repair and

manufacture.

Marine Division

Pre-purchase Inspections.

Scheduled servicing.Generator set repairs/rebuilds.

Engine and transmission repairs/rebuilds.

Propellers, shafts and stern drive repairs.

Machining and fabrication including stainless and

aluminium.

Electronic engine diagnostics.

Instrument and auto-pilot installation/repairs.

Alterations.

Re-powering.

Agents for Steyr Motors and Yanmar.

Agents for TRAC Ecological Marine Products.

Fabrication

Automated safety access ladders and platforms.

Design, fabrication and installation of cooling,

intake and exhaust systems to xed and mobile

plant.

Design, fabrication and installation of safety hand

rails to xed and mobile plant.

Tank fabrication, repairs and modications.

Structural steel fabrication and modications.

Crushing and screening, design and modications.

Offshore projects.

Mechanical Repairs

Fully equipped mine specication eld service units.

Total and partial machine overhauls.

Engine, transmission, differential and nal drive rebuilds.

Mining component rebuilds.

Fleet maintenance.

Service exchange components.

Fixed and mobile plant projects and upgrades.

Vessel and offshore oil rig maintenance, repairs and

upgrades.

Shutdown services and project work.

Repairs to all types of high pressure water pumps and

accessories.


Drafting, design and consulting (modelling using 3D software).

Fully equipped mobile eld service units available all hours.

Vertical boring up to 3m diameter 1.9m height.Portable line boring, in house and on site.

Turning up to 700mm diameter x 4m long.

Milling, universal and bed mills with rotary tables and indexing capabilities.

Slotting and shaping up to 650mm stroke.

Horizontal and oor boring of large components.

Surface grinding.

Drilling.

Fully equipped workshop with machining and fabrication capabilities.

Qualied trade personnel.

On-site labour hire

TECH - SPEC


16/66



Goodwill EngineeringMore than just good business


Goodwill Engineering has been operating as a light engineering business for over 30 years.

As a Quality Endorsed (ISO 9001:2008) company, all of our procedures for Quality and Occupational Health &Safety are fully monitored and documented in line with our operations. Environmentally, we have reduced our carbonfootprint; our vision is to continually reduce our carbon footprint and operate our business to meet client & communityexpectations in line with social responsibility.

Our diverse range of equipment and years of experience ensures we can offer you a variety of capabilities fromindividual components, right through to sub-assemblies for various construction and mining projects.

Our manufacturing facility is able to provide a wide range of building hardware that services both housing andcommercial construction.

Our specialist range of building and fabricated products including robotic welding is listed in with technical specications

overleaf.Employees at Goodwill Engineering receive on the job and formal nationally accredited training in a fully equippedworking environment. All training is supported by qualied staff, including specialist ongoing support wheneverrequired.

Goodwill Engineering337 Victoria RoadMalaga WA 6090

Tel: (08) 9249 3444Fax: (08) 9249 3573


Section 4


17/66



PRODUCTS

Construction

Galvanised wire and rod

Stainless wire and rod

Sub-assemblies for construction projects

Cavity ties

Hoop iron & ashing

Engineering

Plant equipment frames

Cleats, base plates & ttings

Access ladders

Benches and frames

Sub-assemblies for mining projects

Specialised trailers

Manholes & pit lids

CAPABILITIES AND SERVICES

Cutting

High denition plasma cutting (material size 2mm to 25mm thick, sheet size up to 1,500mm x

2,400mm)

Guillotine (3m wide 6mm thick)

Ironworker- 100 tonne automatic feeder with cropping capability of at bar up to 600mm x

15mm & 400mm x 20mm angle 152mm x 152mm x 13mm

Drilling & Punching

CNC punch 80 tonne (handling up to material sizes of 1m x 0.5m x 20mm)

Multi punching (3 heads 5mm to 25mm)

Drilling 5mm to 30mm

CNC linear punching 80 tonne up to 3m from 5mm to 50mm thick

Brake Pressing

150 tonne x 3.7m bed

Power Presses

2 tonne up to 100 tonne

Welding

Robotic (400 amp), TIG, MIG and spot-welding of aluminium, mild and stainless steel

Threading Machines

Up to 75mm diameter

Material Handling

Fork truck - 3 tonne

Truck - 6 tonne capacity - 6m lengths

TECH - SPEC


18/66

Section 4



Section 4

Grundfos PumpsAdvanced pump solutions & water technology


Grundfos is a global leader in advanced pump solutions and a trendsetter in watertechnology. Grundfos contributes to global sustainability by pioneering technologies thatimprove quality of life for people and care for the planet.

The Grundfos Group is represented by 80 companies in over 55 countries, and has anannual production of more than 16 million pump units, making Grundfos one of the worldsleading pump manufacturers.

Grundfos Pumps Pty Ltd was established in 1980, and for the past 30 years has providedsustainable, innovative pumping solutions to customers throughout the country, covering arange of applications. Grundfos Australias head ofce is located in Regency Park, South

Australia, with Sales Ofces across the country. Grundfos Pumps Pty Ltd employs over 140employees and has a turnover of $130million.

In 2010, Grundfos Australia opened its new facility in Ormeau, Queensland, specialisingin water treatment projects. It boasts a dedicated team of Project Engineers, a productionteam and a service team enabling it to serve as the hub for water treatment engineering and

assembly activities for Australia.

In Australia, Grundfos goes to market with a range of pumping solutions within the marketsegments of domestic building services, professional irrigation & agriculture, commercialbuilding services, utilities, mining , and industry.

The Grundfos corporate brand is based on six values that form its base and are essential forits actions and behaviours. They ensure that Grundfos keep moving in the right directionsand help to shape Grundfos. Our values are sustainable, open and trustworthy, focused onpeople, independent, partnership, and relentlessly ambitious.

Grundfos Pumps Pty LtdWA Sales Ofce

1 / 7 Marchesi StreetKewdale WA 6105Ph 08 9353 4595

Fax 08 9353 4596A/h 1300 307 733

[email protected]


19/66



PRODUCTS

Domestic Building Services

Water supply, pressure boosting, wastewater handling, drainage, heating and hot water needs in and around the home.

Professional Irrigation & Agriculture

Ground water supply, surface water supply, pressure boosting, water transfer and water treatment for agriculture and irrigation.

Commercial Building Services

Water supply, pressure boosting, wastewater handling, drainage, heating and hot water needs for buildings used for commercial

purposes (e.g. hospitals, schools, apartment buildings, ofce blocks etc.).

Utilities

Water intake, treatment processes, distribution, waste water collection, waste water treatment and

disposal for councils and municipalities.

Mining

Solutions for the mining sector, covering applications within dewatering and drainage, water treatment, wastewater handling, raw

water intake, dust suppression and processing.

Industry

Solutions for the transportation of uids in manufacturing processes, such as food and beverage,

pharmaceuticals, chemicals, etc.


Quality Certication AS/NZS ISO9001

Environmental Certication AS/NZS ISO14001

Safety Certication AS/NZS 4801

Provision of Test Certicate 96507895 (Certicate of Compliance with EN102042.1)

Provision of Test Certicate 96507896 (Test Certicate Non-Specic Inspection & Testing EN102042.2)

Pump testing in accordance with standard ISO9906

TECH - SPEC


20/66

Section 4



Inter-SteelProviding quick turnaround for steel fabrication andengineering manufacturers of Western Australia


Inter-Steel Pty Ltd recognise that steel fabrication and engineering manufacturers of Western Australia need a quick

turnaround from order to delivery for their proled cut steel plate requirements.We are also aware that the total cost of prole cutting steel in-house is prohibitive due to machine capital outlay,operator and programming staff requirement, steel plate stock and remnant control cost, as well as the amount ofvaluable oor space which is taken up by machine and stock.

Inter-Steel Pty Ltd offers its customers quick delivery response with a norm of three to four days from order to delivery.

We have even programmed and prole cut overnight especially for those customers who have urgent need and maybe located in country WA locations. This is achieved by employing top quality people who understand our customersneeds and requirements, and the latest prole cutting technology which includes laser, plasma, hi-denition plasma,oxy fuel and plate drilling, slot milling, counter sinking and chamfering systems all from one location.

Utilising the latest laser, plasma and oxy fuel technology together with advanced CAD/CAM programming software,Inter-Steel Pty Ltd has become recognised as a leading supplier of proled cut steel plate in Western Australia.

Our many years of applications experience in the mineral processing and quarrying industries ensure that InterScreenAust Pty Ltd can offer the correct screening media for the application.

Inter Steel Pty Ltd97 Ilda Road

Canning Vale WA 6155Tel: (08) 9256 3311

Fax: (08) 9256 3322Email: [email protected]

www.intergroup.net.au

Section 4


21/66



PRODUCTS

Cutting

At Inter-Steel Pty Ltd we offer ve different cutting processes tosuit our customers specic requirements:

Laser Plasma Oxy

High denition plasma with drilling, slot milling, counter boring,counter sinking.

High Denition Plasma with plate drilling, slot milling,counter sinking and boring

Very accurate prole cutting 0.5mm on plate sizes of up to 4mx 12m or more. Hi-denition plasma cut up to 50mm thick or oxycut up to 200mm thick. Holes drilled or slot milled in plate of upto these sizes to a diameter of 40mm utilising the latest prolecutting and machine drilling technology all in the one operation.Bevel edge cut proles ideal for accurate weld preparation.

Laser Machines

Laser is capable of cutting up to 20mm steel, 12mm stainless

steel and 8mm aluminium. It is capable of cutting plate sizes upto 2.0m x 4.0m.

Plasma Machines

Capable of cutting steel up to 50mm thick, holding two, 3.2m x

12.0m plates, and of providing bevelled edges when required forweld preparations.

Plate

Full range of plate specications including AS/NZ3678 GR250and GR350 and a range of quench and tempered plate. Provisionof a full plate supply and cutting service.

Oxy Fuel Machines

The oxy fuel machine is capable of cutting steel up to 200mmthick. It can cut plate up to the size of 3.2m x 12.0m. Multiheadcutting ensures cost-effective cutting.


All grades of steel plate - Quenched and tempered wear plate - Hard faced plate - Aluminium - Stainless steel:

All grades of metal plate and sheet from 0.5mm to 200mm in thickness cut to shape and size. Employing the latest CNC prolecutting machinery and CADCAM programming technology, we are able to prole cut to shape and to exacting tolerances platesizes in excess of 12m in length and 4m in width. With advanced plate drilling, countersinking, milling and tapping capability weoffer precision drilled holes and milled slots for all plate sizes. We are also able to provide proled cut plate components with fullbevelled edges offering cost savings to our customers when weld preparation is required.

Laser - Plasma - High denition Plasma - Oxy fuel - Plate drilling - Countersinking - Tapping - Plate milling - Bevel edgedcutting:

Our modern CNC prole plate processing operations are versatile and offer our customers service and quality with real cost savingson laser, plasma, high denition plasma, oxy fuel, plate drilling, slot milling and edge bevelling all from one supplier.

Drafting and programming

Our state of the art computer software and highly trained personnel ensure that all material is drawn, nested and machineprogrammed precisely and economically. Transitions and developments can be produced including cones and lobster backs.Whatever shape you require we can cut it from either a dimensional drawing or DXF le. E-mail or fax your requirements and wewill take care of the rest.

Steel Stocks

Extensive stock holdings with a wide range of sizes and grades of plate.

TECH - SPEC


22/66

Section 4



Kingston DNAEmpower your dreams - make them happen

Capability StatementWelcome to Kingston Training and Employment, a Registered Training Organisation(RTO), proudly award winning and a multi-nalist over many years, and locally ownedin Western Australia. Our training colleges are located in South Perth, Malaga, Belmont,Mandurah, Bunbury and Geraldton.

Our organisation has been an RTO involved in training services since 1999 and iscommitted to the provision of quality vocational education and training as well as industryspecic training, supporting industry training and individuals to attain careers.

One of the reasons for our success is our unique collaboration and partnership betweenindustry, specialist support for our students and our passionate, highly qualied staff.

We ensure that the learning experience is totally dedicated to the real needs of industry

while ensuring a challenging, rewarding and interesting programme for the participants.

Participants from all over the world attend our programmes, who bring with them a rangeof learning styles, needs and expectations.

The courses are designed to include a variety of learning strategies to:

Prepare participants for their role as a member of a specialised working team.

Focus on the real required practical skill and knowledge to assist the workplace.

Kingston Training and Employment

37 Hargreaves Street

Belmont WA 6104

Tel: 1300 855 503

Fax: (08) 9479 4880


www.dnakingstontraining.com.au

Section 4


23/66



PRODUCTS

Our programmes are varied from rst aid, through to supervisor management skills, advanced welding codes, communication,marketing, OHS, forklift, white card and risk management, to name a few.

Cert III and IV in Dental Assisting

Diploma in Dental Technology

Diploma of Management (Business)

Advanced Diploma of Management (Business)

Cert II, III and IV in Engineering (Welding)

Cert IV in Occupational Health and Safety (OHS)

Cert IV in Health Care (Ambulance)

Intra-Oral Radiography

Infection Control


Courses are designed specially to prepare your team in:

Specialised roles as a vital team member, supervisor, manager or occupational health and safety team member, maintaining

continuous professional development in the eld assisting with roles in the management of change, which occurs in the workplace

organisation, pertaining also to practice and procedures.

Cert II, III and IV in Engineering (Welding) MEM20205 | CRICOS 073452A:

The following units have been selected to provide relevant skills for engineering production.

They include:

A variety of practical fabrication techniques - MIG, TIG and manual metal arc welding

Structural training pipe to plate

Safety requirements, work practices

Use of wide range of hand and power tools

Engineering science and measuring concepts

TECH - SPEC


24/66

Section 4



Lightspeed CommunicationsInstallation and maintenance of structured cablingand bre optics


Established in 2001, Lightspeed Communications has evolved to becomeone of Australias leading specialists in thedesign, installation and maintenance of structured cabling and bre optic communications network.

As a privately owned Western Australian based business, our quality services are recognised amongst leaders in themanufacturing, construction, telecommunications and mining industries throughout Australia.

Our team of highly skilled technicians has more than 25 years combined experience in the design and implementationof communication networks, ranging from ofce t outs to complex bre optic networks.

Our focus on excellence, attention to detail and our exibility has contributed to our reputation as leaders in this nicheeld.

Lightspeed Communications

68 Gordon Road East

Osborne Park WA 6017

Tel: (08) 9200 6226

Fax: (08) 9242 3676


www.light-speed.com.au

Section 4


25/66



CUSTOMERS

We have a broad client base ranging from small business to multinational corporations. We undertake

All clients are assigned an experienced project manager to ensure consistency and maintain one-on-one contact between the clientorganisation and on-site personnel.


Design Consultancy

The design phase is the critical rst step for any communication network. This stage provides the important foundation to ensure outstanding performance, reliability, manageability and potential for growth.

Lightspeed Communications are designed with the most appropriate and cost-effective hardware to meet system requirements.

Structured Cabling

A structured cabling system provides the platform upon which an overall information system is built, making it a critical componentfor any business.Cat5e, Cat6 and Cat6A for construction, plant facilities, camps and administration.

Lightspeed Communications has vast experience in building exible cabling infrastructure which supports multiple voice, data,video and multimedia systems.

Fibre Optics

We can supply, install and test all bre optic cables and networks. Whether the requirement is for a small point-to-point connection,a large bre backbone network for an ofce or plant, or a multi-camera CCTV installation, our team can ensure the best networkis installed at an affordable cost.

Installation, termination and testing of underground, above ground and OPGW works.

Maintenance

Once a cable system has been constructed, it must be well maintained to ensure the highest level of network availability. LightspeedCommunications is able to provide the specialist equipment, resources and knowledge to maintain your network. In addition, ourcertied technicians have the expertise to swiftly repair infrastructure in the event of a cable fault.

Communications Infrastructure

Installation or upgrade of pit and pipe, cable support pathways and communication room builds.

Lightspeed Communications undertake project and service work to remote sites, both offshore and Australia wide.LCA specialist teams are able to mobilize at a moments notice to provide solutions in time critical environments, as well as planned

infrastructure builds or upgrades.

Lightspeed Communications is able to provide a comprehensive service for businesses with require electrical work to be completedduring infrastructure renewal or expansion.

TECH - SPEC


26/66

Section 4



MatchTech ServicesEngineering support for WA


Formed in 2008 and located in Malaga, Western Australia. With over six hundred square metres of modernmanufacturing facilities, we are intent on producing a quality product and offering sensible, cost-effective solutionsto complex machining problems from concept, through design and prototype to production. We are committed to

providing a reliable service to customers who require a quality product, rst time, on time, every time.

With trade and technical backgrounds, and qualications in all aspects of machining and programming, predominatelyfor the aerospace, defence and motor racing segments and more recently manufacturing to API standards for the oiland gas sectors, we have the resources, experience, ability and knowledge to meet the most stringent manufacturingneeds.

We have expertise in mechanical assembly including pipe tting, pneumatic and hydraulic assembly andelectromechanical component assembly, the capability in software and control programming logic controllers, andwe are vendor trained and experienced with globally acknowledged leading CAD CAM and Solid Modelling solutions.

Our expertise and capability extends from our line of standard products to the design and manufacture of unique,special purpose test and support equipment.

We believe our customers return to us because of our commitment to quality, timely delivery and follow-on customersupport.

Our business model is based on Lean Manufacturing techniques and that philosophy encompasses our entireoperation. The core value that drives our business is total customer satisfaction.

Matchtech Services Pty Ltd

Unit 2, 5 Mulgul Road

Malaga WA 6944

Tel: (08) 9209 2101

Fax: (08) 9209 2102


Section 4


27/66



PRODUCTS

Automobile Industry

LPG Injection components and manifolds

Pneumatics and Hydraulics Industry

Complete new and reconditioned hydraulic cylinder assembliesmanifolds and control parts

Pipe Fitting

Pneumatic circuits and control

Oil & Gas Industry

Down hole, survey and control equipment

Aerospace and Defence Industries

Fuel systems, air frame and control details

Electromechanical

Plant control equipment, environmental process controls

Materials

Fabrication and nish machining of precision engineered assemblies in alloy steels, aluminium, brass, bronze, nickel alloys,

plastics, stainless steels and titanium

CAPABILITY AND SERVICESHorizontal CNC machining in ve axes (Machining Centre : twin pallet to 5003mm)

Vertical CNC machining in three axes (X: 800mm Y: 600mm Z: 750mm)

Currently utilising the most up-to-date ve axis CADCAM and 3D solid modelling software packages

CNC turning (up to 500mm diameter, 1,000mm long)

Conventional milling and turning (up to 500mm diameter, 1,500mm long)

All CNC machine tools are networked to our servers enabling a DNC link

Ofine CNC programming in ve axes

Hydraulic and pneumatic design, manufacture & assembly

Mechanical tting and assembly

Full manufacturing, material and documentation traceability

Extensive range of calibrated inspection equipment

Solid modelling and nite element analysis

We can program in 2,3,4, and 5D with ability for post-processing to most CNC control formats

We have considerable experience in 3D modelling and 2,3,4 and 5 axis machining, and can accept and translate all standard letransfer formats (e.g. DXF, IGES, ITL)

Also offered are the resources, ability and integrity to partner OEMs in the management and manufacture of research anddevelopment projects ensuring condentiality, the retention of intellectual property and full traceability on all stages of manufactureon deliverables

Six hundred square metres of modern manufacturing facilities

TECH - SPEC


28/66

Section 4



Panther PowdercoatingA passion for powder coating


Panther Powdercoating was established to address the needs of the electronics industryand is now providing services across a number of industries.

Panther has the cleanest powder coating facility in Perth and is aimed at business-to-busi-ness relationships.

We have a ROHS compliant pretreatment bath for aluminium.

Currently we can accept work that is up to 30kg, that has a length up to 2.2m with a widthof 1.7m.

At Panther Powdercoating we boast a stainless steel oven with double convection fansand electrically driven heating elements so as to maintain a close tolerance of the curingtemperature.

Similarly, we have the White House which is our clean room where our powder coat isapplied.

Panther Powdercoating Pty Ltd

5 Loton Avenue

Midland WA 6056

Ph: 0409 083 093


www.pantherpowdercoating.com.au

Section 4


29/66



PRODUCTS

Metal Signage

Panther has the ability to embed high denition colour graphicsinto powder coat.

This new process is targeted to replace the conventional silkscreening and engraving methodologies

Decorative Glass Panels

Panther can encapsulate high denition photographic imagesinto glass panels.

This new technology provides enormous scope for decorativepanelling in both a domestic and commercial environment.

Uploads for this new process are accepted via our website -www.panthergraphics.com.au.

CAPABILITIES AND SERVICESPowdercoating

At Panther Powdercoating we have the White House which is a dedicated, dust free painting room. We wear white gowns, not toprotect ourselves, but to ensure that we dont contaminate the painted product.

Preparation

At Panther Powdercoating we understand the importance of masking and blanking. We also take care to make sure the surface isfree of contaminants that could affect the paint quality and durability.

Grit Blasting

We can provide abrasive grit blasting as a preparation to powder coating to enhance adhesion to difcult materials such as stainless steel.

Conversion Coating

Panther Powdercoating has ROHS compliant conversion coating for aluminium. Our conversion coatings are environmentallyfriendly.

Special Colours & Effects

Special colours and effects are also available. These include hammer nish, textured, vein, glitter and pearl. Call in and see usto discuss your needs. We hold metal colour swatches so that you can get a direct feel of the colour and texture in preference toseeing a paper colour chart.

TECH - SPEC


30/66

Section 4



Pedco EngineeringSteel pressing, rolling, welding and fabrication services formedium to heavier steel plate

Pedco Engineering Pty Ltd

97-101 Poole Street

Welshpool WA 6106

Tel: (08) 9351 9463

Fax: (08) 9351 9453


www.pedco.com.au

Section 4


Pedco Engineering is a steel forming and fabrication business operating since 1987,mainly in medium steel plate. Since its purchase from the founder in Sept 2005, it hasbeen transformed from a small family owned workshop with ve staff to a professionallyrun privately owned medium sized business with 25 staff and over 300 customers.

Our services are used in a wide variety of industries including:

Mining Infrastructure Specialised Vehicles Oil & Gas Food Constructure Agriculture

Environmental Engineering

Our focus on employing top quality staff, acquiring modern efcient machinery andimplementing time saving systems, ensures wastage is reduced and maximum value isadded.

Pedco Engineering enjoys a premium position and outstanding reputation in the marketby providing superior exibility and quality workmanship, efciency, reliability and fastturnaround times, particularly on small jobs.


31/66



PRODUCTS

Welded shells Rolled hand rails

Tanks for vehicle tankers Wheel stands

Square to rounds Truck tow hitches

Cones Rail wagon components

Wheel bands Cast in plates

Columns Frames

Clamp bars Vibrating screen frames

Light brackets Skids for generator sets and pumps

Flanges Access ladders


Plate Bending

350ton LVD 6m long (up to 8mm thick x 6000mm long mild steel bends)

600ton Scalen 3m long (up to 25mm thick x 3000mm long mild steel, to 50mm thick on shorter bends)

280ton Scalen 4.3m long

120ton Durma 3m long

Plate Rolling

Light to heavy gauge up to 3100 long depending on radius on:

Biko 540@ 3100 long

Davmar 460 @ 3100 long

Roundo 310 @ 3100 long

Roundo 205 @ 3100 long

Section Rolling

Angles up to 125mm x 125mm x 12mm, Flat bar up to 100mm x 16mm on.

TECH - SPEC


32/66

Section 4



Pirtek MalagaFor all your hydraulic & industrial hose requirements


A locally owned franchise business operating since 1999. We are part of a global network of service and supply centresto the engineering, manufacturing and construction industries. Our focus is service; our reliable hose breakdownservice saves you time and money, getting you back up and going fast.

Five mobile service vehicles dedicated to servicing Malaga and surrounding areas On call 24 hours a day, 7 days a week Rapid response World class products installed by qualied technicians Complete hose & ttings management programmes Fully equipped workshop and showroom conveniently located in Malaga Power steering and brake hoses made while you wait

When your business depends on conveying any medium, be it uid or gas, Pirtek, the market leader in uid transfer

solution has the right people, with the right proucts and service, in the right place.

Phone us or just call in and check out our monthly specials available now.

Pirtek Malaga4 / 321 Victoria Road

Malaga WA 6090Tel: (08) 9209 3444

or Simply Call 134 222Fax: (08) 9209 3555


Section 4


33/66

TECH - SPEC



PRODUCTS

Hydraulic hose Ball valves

Hydraulic hose tails Lubrication equipment

Hydraulic adaptors Cable ties

Thermoplastic hose Pneumatic products

Flexible metallic hose assemblies Oil spill kits

PTFE Teon hoses Protective hose guard systems

Industrial rubber hoses Hose reels

Industrial PVC suction & pressure hoses Hydraulic oil

Non-conductive hose Hydraulic tube couplings

High pressure jacking Tube and pipe supportsJet wash Kamlok couplers

Water blast Brassware products

Automotive hose Pirtek lanolin products

Hydraulic stainless steel ttings CEJN products

Quick connect couplings Pirtek industrial assembly products

Instrumentation ttings Pressure washer accessories

Clamping systems

CAPABILITIES & SERVICES24 hours, 7 days per week on-site service

On-site hose replacement

Vendor managed stock

Equipment inspections and appraisals

Hose and tting kitting

Hose testing and certication

Hose cleaning

Complete hose management programmes

Environmental product training

Tube bending (some locations)

Light machining

Environmental product management

Hose and tting product training

Supply & installation of greasing and lubrication systems

Comprehensive consumption reporting


34/66

Section 4



Precision JobbingPrecision by name, accuracy by nature


Established in 1984, Precision Jobbing is a small machining shop who has the capability tocarry out very precise and complex machining operations on our CNC equipment. Basedin Wangara we are in the centre of a vey busy industrial area and have a broad base ofclients throughout Australia.

Our business has been built on reliability, trust and a total commitment to our clients totake every step in meeting their lead times. Our statistics speak for themselves; since wetook over the business nine years ago we have not lost one client. We have continuallysatised the requirements of our customers in the agricultural, automotive, mining andconstruction industries.

The owner of the business who is trade qualied, has spent the last 33 years in the everchanging world of machining. He has exposure to working with all CNC prgrammesand understands the technology required for the best machine set ups, in order to meetmanufacturing tolerances and current standards.

Due to our experience in the industry we are able to offer maximum efciency on bothsingular and batch production in order to give our clients those added values on allservices.

With our latest technology in CNC equipment we are able to provide customised lasermarking to your machined parts. This could just simply be the etching of part numbers ormore complicated company logos.

If you believe we can help with your product solutions then please do not hesitate incontacting us.

Precision Jobbing

3/11 Glossop Street

Wangara WA 6065

Tel: (08) 9309 4110

Fax: (08) 9302 1190


Section 4


35/66

TECH - SPEC



PRODUCTS

Building Industry

Specialist in furnishings for doors, windows, staircases etc., for all internal and external structures.

Mining Industry

Batch sub-assemblies and individual parts for earth moving equipment and relative attachments and drill rigs.

Forestry

Batch sub-assemblies and individual parts for forestry equipment. We have regular contracts with clients on service and repair

work in this eld.

Specialist Equipment

Batch production and subassemblies of items for any specialised projects (e.g. pipe anges to ISO standards).

MaterialsIndividual and sub-assembly items in alloy steels, aluminium, brass, bronze, cast iron, Inconel, nickel, plastics, stainless, and

titanium.


Vertical CNC machining in three axes (X: 1,000mm Y: 500mm Z: 800mm)

CNC turning with live tooling (up to 230mm diameter, 550mm long plus C Axis milling).

Conventional turning (up to 600mm diameter 2,000mm long between centres).

Conventional milling (turret mill X: 700mm Y:400mm ).

Patterns built to your unique specications using CNC tooling.

Manual slotting for internal keyways.

Full manufacturing, material and documentation traceability.

Extensive range of calibrated inspection equipment.

We can program in 2D and 3D.

150m2 of modern manufacturing facilities.

CNC laser engraving machine (working area 110mm x110mm x 200mm)

At Precision Jobbing we offer a series of light assembly work which covers soldering, gluing, pinning, pressing. We also take thatextra step and organise surface treatment and special packaging for our clients.


36/66

Section 4



Precision Sheet MetalHigh quality sheet metal products


Our talented team specialise in providing a range of close tolerance sheet metal or sub-assembly components in

aluminium, stainless and carbon steel and other exotic materials for use in the nal assembly of your project.

We also design and manufacture emergency warning equipment utilising the latest technology in LED lighting.

We are agents for MayTec extrusion which is used widely in Europe and America. This extrusion can take the place of

general SHS tubing. No welding is required; the product is anodised clear so there is no need to powder coat. If you

do require a powder nish, the anodised surface is an ideal surface for this process. MayTec extrusions are simply

cut to length, drilled for the connectors and assembled. Contact us for a solution to your framing requirements using

MayTec slotted prole systems.

Precision Sheet Metal & Laser Cutting15 Whyalla StreetWilletton WA 6155

Tel: (08) 9354 9888Fax: (08) 9457 5699


Section 4


37/66



PRODUCTS

Agent for supply and fabrication of Maytec aluminiumextrusions

Electrical cabinets

Partitions and protective walls

Machine bases Protective and works cabins

Machine enclosures Special shelves

Machine guarding Plant equipment

Work stations Display systems

Assembly and inspections stations Exhibition cabinets and stands

Tanks Multi-purpose frames and brackets


Cutting

Turret punching: Omada 8 station. This machine is small and versatile, very handy for small work and small batch work. MuratecCNC servo driven ram turret punch press. Muratec, for the rst time in punch press history introduced in 1994 a new conceptin ram drive technology which incorporated a toggle mechanism driven by an AC Servo motor. Hydraulic oil-less sheet metalprocessing enables ecological machine operations saving environmental, natural recourses. It has a rate of 220 hits per minuteat 25mm pitch or 600 hits per minute in nibble mode. We can punch up to 5mm carbon steel.Laser Cutting: 8kw laser which cuts up to 8mm sheet.

Brake Pressing

One 2,400mm long and one which is 1,200mm wide. Both machines complement each other. The 1,200mm machine is brilliant

for our small work, whereas the other machine is good for up to 8mm plate, depending on the length of the material.

Guillotining

A Safan which is a highly accurate machine. Cuts from 0.4mm to 4mm carbon steel. The back stop is fully adjustable andaccurate to 0.1mm.

Grinding

A Grinding Master graining machine which can polish stainless steel to nearly number four nish, plus it deburs all our metalwork. Width of the machine is 900mm.Captive fastener insert machine which is perfect for installation of our threaded nuts, standoffs and studs.

Welding

TIG and MIG welding of aluminium, carbon and stainless steel.

Machining

We also have a small machinery shop with two lathes and three milling machines. This is perfect for our Maytec extrusion andassociated work.

TECH - SPEC


38/66



Section 4



Primary SalesInnovative and cost-effective solutions to a broad spectrumof engineering challenges


Primary Sales Australia is a wholly owned Western Australian based company which trades nationally via substantialpremises in Midvale, Western Australia, Dubbo, NSW, and Adelaide, South Australia.

The company manufactures products in a specially designed, purpose built facility in the Midvale industrial area,17kms

from Perth. This metropolitan location has easy access to the freeway system and major truck routes to the east, north

and south.

With a large covered production and storage area of 2,000m2, well equipped with overhead gantry cranes and

cutting, forming, machining, grinding and welding machines, the company designs and manufactures both large and

small jobs associated with mining, processing and agricultural industries. Materials used include rubber, vinyl, nylon,

tungsten carbide, carbon steel, mild and stainless steel.

Primary Sales Australia is a leader by world comparison in specialised agricultural tillage and harvest tool technology.

Our core business is the design, manufacture and wholesale distribution of these leading edge products.

By-products of these activities include the application of wear-resistant materials, manufacture and refurbishment

of mechanical engineering products, manufacture of prototypes for research and development and the provision

of solutions to engineering problems. A comprehensive staff of administration, sales, engineering, production and

logistics personnel and team leaders all work to deliver outcomes which further reinforce the companys relevance to

its marketplace.

Primary Sales (Head Ofce)

44 Meliador Way

Midvale WA 6056

Tel: (08) 9250 3500

Fax: (08) 9250 3600


www.primarysales.com.au

Section 4


39/66



TECH - SPEC



PRODUCTS

Precision seeding machines Crop residue management tools

Modules for disc seeding Straw and hay management equipment

Presswheel assemblies Wear resistant tungsten carbide application and solutions

Disc-coulters Rotary mill component design/manufacture

Harvesting equipment Industrial machinery manufacture/assembly

Points and seeding boots Prototype manufacture

Combine conversions Design, machining and fabrication for specialised miningapplicationsTrial seeding equipment


Current Machinery

CNC milling machines and CNC lathe, radial arm drill, hydraulic presses, punch and shear, hydraulic pipe bender, swagingmachines, cold saws, auto bandsaw, prole cutter, MIG welders, TIG welder, plasma cutter, etc.

Manufacturing process to be applied based on available resources and machine capabilities.

Supplier Network Relationships

For laser cutting, production punching, CNC machining, patternmaking, injection moulding, rubber moulding, iron casting, heat

treatment, powder coating and zinc plating.

Services include machining, tting and assembly, repairs and refurbishment, fabrication, wear protection and enhancement,reverse engineering, prototype manufacture and problem solving.

Design

Mechanical, structural and agricultural design using Solidworks modelling package, including FEA. Files able to be translated toand from many other drawing packages.

Primary Sales Australia imports material only when unable to source locally and exports products to various internationaldestinations.

Please contact Primary Sales Australia to discuss what we can do for you.


40/66

Section 4

Prime Motion and ControlSuppliers and manufacturers of hydraulic componentsand systems

Prime Motion & Control

4/471 Victoria Road

Malaga WA 6090

Tel: (08) 9248 4144

Fax: (08) 9248 7677


www.primehyd.com.au



Section 4


Prime Motion and Control was founded in 1984 as ahydraulic sales and service company. Since that datethe company has grown by adding a number of productranges, milling and turning machines and increasingstaff. The company changed ownership in 2009, whenthe then owner retired. With additional investment,

the company has increased its product and servicesoffering.

Today, prime Motion and Control is a dynamicorganization with its focus maintained on sales andservice. The company has continued to differentiateitself from the run of the mill hydraulic companies bytargeting the areas of excellence in its products andservices.

Prime Motion and Control maintains a competitiveadvantage in these areas and due to its size anddynamics is able to offer a high level of service,competitive pricing and good delivery times.

Prime Motion and Control prides itself on open andstraightforward communication with customers toachieve common goals.

Prime Motion and Control is a Western Australian ownedand managed company employing eleven people. Thecompany endeavors to uphold its corporate responsibilityby adhering to all OHS legislations and policies. Inaddition to this, Prime Motion and Control adds value tothe community by providing apprenticeships, training andmentoring. Prime Motion and Control is also committedto promoting growth from within the organisation by both

internal and external training and staff advancementopportunities

Prime Motion and Control have ofcially purchasedSmith WA and as such all the stock and assembly willbe moved to our premises in Malaga. With our ISO9001

certication Prime Motion & Control will continue tomaintain the high standard of manufacture and assemblywhich we have always prided ourselves on.

Steve Briggs, the former manager of Smiths WA hasjoined Prime Motion & Control and will be continuingto deliver his usual high level of service and expertise.Steve has 19 years experience with this product andwe believe he is one of the best qualied people in thecountry.

We rmly believe that Prime Motion & Control andSmiths WA will compliment each other in many aspectsof supply, engineering and small turnkey projects

including our own cylinder and manifold manufacture.Our engineering and R&D department will assist withprojects and can work towards a greater cost savingssolution no matter how big or small your project.

Our stock holding of Smith products is substantial and isby far the largest nationwide.

Our new website is currently under construction forSmiths WA and will be launched very soon for yourordering and information reference.

All enquiries can be made to Prime on

[email protected] or by telephone

08 9248 4144.

SMITHS WA HAS A NEW HOME!!

We are proud to announce that as of1st July 2013 Smith WA has a new home at

Prime Motion and Control!


41/66

PRODUCTS

Specialised Prime manufactured valves Compact 12/24VDC power units

Manifold blocks and cartridge valves Small and medium sized hydraulic cylinders

C-top manifolds Special adaptors, ttings and machining

Manifold control systems: design, estimating andmanufacturing.

Filtration units and systems

Linak electric linear actuators

Importers of specialised mobile load holding valves Hydraulic power units and systems


Custom hydraulic training courses

Training on customers equipment

Hydraulic system designs and hydraulic engineering consulting



TECH - SPEC


42/66

Section 4




Project Industries have been designing, engineering and manufacturing for over 22 years. During that time we havedeveloped a reputation for design and supply of highly sophisticated and automated products in the following corebusinesses:

(i) Strategic Relationships

Turnkey projects, managed utilising our in-house facilities for engineering fabrication, tting and machining. Our focusis to provide innovative solutions to deliver your project on time in the most cost effective manner.

(ii) Attachments

We have developed a comprehensive range of attachments, metal fabrication and engineering solutions for themining, agricultural and earth moving industries. These are marketed under the BOSS brand and fabricated in our1,600m2 workshop by a highly skilled team, to suit our client requirements and Australian Standards.

See our website for attachment range: www.projectindustries.com.au

If there is a special attachment you require that is not on our website, then please contact us for assistance.

(iii) Servicing

Specialised division for site maintenance. Service agent for Palnger Australia, for servicing and supply of parts foryour truck mounted cranes.

Project Industries16 Midas Road

Malaga WA 6090Tel: (08) 9249 1586

Service 1300 FIX CRANESFax: (08) 9249 3494


Project IndustriesInnovative Engineering Solutions

Section 4


43/66

TECH - SPEC



PRODUCTS

The Oil & Gas Industry

Fabrication of sub-assemblies in line with client requirements.

Construction and Mining Material Handling Equipment

Structural steel work, general fabrication and specialised projects (e.g. mechanical system to replace tubes in heat exchangers).Material handling cells and conveyor ,and washer systems for mining samples.Drill rigs and various sub-assemblies.

Agricultural Industry

Design and fabrication of forestry packages for vehicle protection.Fabrication of numerous hinged conveyors, sub-assemblies, t out and testing for grain transportation.

Earthmoving Attachment Industry

Tyre handlersSWL range from 2,000SWL to 8,500SWL to suit various wheel loaders and fork trucks (for various tyre sizes).Please see our website for full range, www.projectindustries.com.au/


Ability to take clients concepts, conduct necessary research and development, and design and produce working models. Wethen have the full capability, technology and resource to project manage any ongoing contract in line with clients requirements,Australian standards & ISO standards.

Detailed design and drafting of earthmoving equipment for numerous original equipment manufacturers.

Designed, drafted in CAD/Solid Works with 3D modelling.

Conventional machining (turning, milling, horizontal boring).

Installation, servicing & supply of spare parts for Palnger truck mounted cranes.

Up to 1,000 hours capacity per week of boiler-making, welding, tting (hydraulics) and machining with qualied trade personnel.

Maintenance

Fitting of various mechanical and automated machine assemblies, erection of structural steel, and general repair work(customised vehicles to suit project requirements).

Materials

Capability to work with carbon steel, stainless steel, aluminium and other exotic materials.Modern under cover area of 1,600m2 (5.5m x 4.5m high doorways).

Overhead cranes with 4.5m under hook height (total SWL 8 Tonne).

Additional 3,520m2 yard area for project work or storage.

Undercover paint area.


44/66



Southern WireAustralian made and owned fencing solutions

Southern Wire Pty Ltd

311 Collier Road

Bassendean WA 6054

Tel: 08 9279 9999

Freecall: 1800 627 722


www.southernwire.com.au

Section 4


Southern Wire was established in 1993 and is a leading Australian

owned and based manufacturer of farm, security and industrialfencing, as well as an installer of security and industrial fencing.

Our focus is on quality and innovation, insuring we offer an unrivalledrange of superior fencing products and solutions.

Products have been used to bring many successful projects tocompletion, from sheep studs in WAs Great Southern region toairstrips in the Murchison from exotic animal enclosures in Malaysia tocattle ranches in North America.

The quality of all products is guaranteed and backed by the fullresources of the company, which has close associations with rural

Australia.

Our guarantee:

Safety - We guarantee compliance with the most stringent safetyrequirements in the industry.

Manufacturing - Choosing Southern Wire guarantees your fence ismanufactured in Australia for Australian conditions.

Project Management - Twenty years of experience and a focus oncomprehensive training ensures that Southern Wire will deliver yourproject on budget, and on time.

People - Our people personify our beliefs and values.

Integrity - Southern Wire ensures outstanding customer relationships

and a level of trust that is rare in todays business environment.


45/66

TECH - SPEC



RURAL PRODUCTSSECURITY & INDUSTRIALPRODUCTS

Griplock Chainwire

Griplock Exotic Fittings & accessories

FarmFence Galvanized pipe

Farm gates Garrison

Fastlock Palisade

Fastlock Horse Fence Security gates

Wire Netting Weldmesh

Plain wire

Barbed wireStrainer assemblies


Personnel

Southern Wires policy is to recruit the most competent and experienced installers throughout WA, guaranteeing industry leading

experience and professionalism. Specic training with experienced installers helps with the expertise and development of new

staff.

Equipment and Machinery

Southern Wire has invested heavily in the latest equipment and machinery to maintain its position as the market leader. Continualinvestment in new machinery and innovation helps to reduce installation time and costs, improve safety and guarantees the client

the best fence on the market.

Project Management

All company works have a dedicated project manager and project supervisor to ensure completion of the project on time and

within budget.

Track Record

Southern Wires track record sets it apart from its competitors.

Remote Area Work

Southern Wire continues to carry out major projects in remote/regional areas. The company has invested in extra machinery

including a rock drill to assist in those projects.

Safety

Safety is the number one priority on all Southern Wire projects, with all management and installation staff undergoing

comprehensive safety training. This is reinforced with the rigorous AS/NZS 4801 Health and Safety accreditation by Southern

wire, guaranteeing the safety and efciency of any fencing project, and eliminating site disruption.


46/66



Section 4

Sushi DigitalWeb Design, app development andgraphic design the smart way

Sushi Digital

First oor, 168 Stirling Higway

Nedlands WA 6009

Tel: 1300 301 988


www.sushidigital.com.au


Sushi Digital Pty Ltd is a West Australian based web development and digital marketing agency specialising in smarttechnologies and processes to service their clients. Borne out of the desire to being world-class web development

services to the Perth market at affordable and world-competitive rates, Sushi Digital have grown quickly to services a

range of business sizes from sole traders to large mining companies.

We have extensive capability in the web and graphic arena with over 60 full-time staff in our team and a big focus on

business analysis and commercial return on investment with all the projects we undertake. View our portfolio at http://

www.sushidigital.com.au/portfolio


47/66



SERVICES

Custom website design and development

iPad and iPhone App development

Graphic design (logos, business cards, stationery, digital banner ads, yer etc.)

Email marketing newsletter template design

Content management system

Social media management (SMM)

Search engine optimisation (SEO)

Complex web systems development and integration

CAPABILITIES

Over 60 full-time staff, majority in design and technical roles

Day and nightshift of technical and development staff for quick turnarounds

IT Business analysis

Project management

Systems analysis

Web 2.0

HTML 5

CSS 3

PHP / MySQL

AJAX, Javascript, jQuery

JSON / XML

Xampp

CodeIgniter

Adobe Dreamweaver

Adobe Photoshop CS5

TECH - SPEC


48/66

Section 4



Section 4

Swan Chamber of CommerceTo build a better business environment for our members


The Swan Chamber of Commerce is the peak forum for businesses in the Midlandregion and is the only full-time organisation representing the business community ofMidland and surrounding areas.

We have a state-wide reputation for lobbying aggressively for what is needed for abetter business environment for the region. And we have been successful.

Every business or individual that becomes a member will benet enormously frombeing able to promote business, meet potential customers, learn about what is goingon in the region that impacts on the business community and keep informed onbusiness issues. If there is something you want to know and we cant help you, weknow who can.

Bi-Monthly newsletter.

Monthly business networking function.

Regular breakfast meetings with prominent politicians.

Regular social activities.

Vehicle for you to gain access to prominent decision makers.

Membership of one of the strongest and respected chambers in WA.

Assistance in dealing with local/state and federal government on

issues affecting your business.

Swan Chamber Of Commerce

1 Old Great Northern Highway

Midland WA 6056

Tel: (08) 9374 5000

Fax: (08) 9274 3369


www.swanchamber.com.au


49/66

TECH - SPEC




Our Belief

Our area as the eastern gateway to Perth should be a vibrant, dynamic business focussed location, providing high appeal for alltypes of business interests from rural to manufacturing, from service industry to professional.

Our Goal

To build a better business environment for our members and to transform our region into a premier choice for business operators.

Our Mission

To provide a business friendly environment, which is committed to allowing all local businesses the opportunity to ourish.

Our Commitments

The members of the Chamber Board and the various sub committees are committed to working with a singular focus for allmembers of the Chamber. We are all committed to achieving our goal.To create lasting monuments and historical record to the people and businesses, past and present, that have made Midland andthe Swan district what it is today.To organise a series of networking functions to:

outline the impact of future growth on the region. discuss the opportunities and issues for business growth. present what governments and business must do to prepare. meet up with existing members. introduce our board and existing members to new or potential members. hear and assist our local industry groups. hear and assist our local educational establishments. work with all on opportunities for business awards.

To create lasting monuments and historical record to the people and businesses, past and present, that have made Midland andthe Swan district what it is today.

To organise a series of networking functions to:

outline the impact of future growth on the region discuss the opportunities and issues for business growth present what Governments and business must do to prepare. meet up with existing members introduce our Board and existing members to new or potential members hear and assist our local industry groups hear and assist our local educational establishments work with all on opportunities for business awards


50/66

Section 4



Verriers Engineering ServicesA one-stop precision machining and engineering shop

Verriers Engineering Services

5 Fairford Street

Bassendean WA 6065

Tel: (08) 9279 9311

Fax: (08) 9377 1895


Section 4


Verriers Engineerings modern workshop is centrally located in the busy Bas-sen-

dean area, utilising Tonkin Highway as an arterial road. Established in 1946, it haskept abreast with the latest technology and that, coupled with over sixty six yearsof experience in the engineering business is one of the main reasons it continuallynds solutions to your engineering problems.

The fully equipped workshop has high technological CNC equipment. It can per-form precision machining on small to large production runs or machine largeritems such as seal rings for most crusher makes and models in its manual ma-chine department.

Being a Department of Transport licensed vehicle repairer and modier, it has thecapability to carry out general engineering for the transport, mining, agriculturalindustries and off road enthusiasts.

Verriers Engineering can also manufacture hydraulic cylinders and components toorder. It is set up to carry out pressure testing of all cylinders after manufacture tomake sure the quality is of the highest standard required.

From plastic to the highest tensile steel, Verriers Engineering will nd solutions for your engineeringrequirements.

Heavy duty plant, mechanical and marine tting is backed up by the machining and weldingdepartments.

Innovation, knowledge and design skills combined with fast turnaround times ensure you get a quality

product from experienced, highly skilled machinists and general engineers.

Varying in size from something as small as a tow ball to 1,600mm diameter crusher component for

the mining industry, Ve

Emicol Capability Brochure

Documents

Transcript of Emicol Capability Brochure