· PDF fileSONARIYA BUNGLAW, BANAS DAIRY ROAD, PALANPUR-385001. DIST: BANASKANTHA. PHONE :...

ઔદ્યોગિક તાલીમ સસં્થા,પાલનપરુ

ઓનલાઇન ટેન્ડરન.ં04, 05 અને 06/2015-16 અતે્રની સસં્થા ખાતે ચાલતા વિવિધ વ્યિસાયોના એફીલીયેશન માટે ટલૂ્સ& ઇક્વિપમેન્ટ અને પે્રવટીકલ તાલીમ માટે રો-મટીરીયલ્સની ખરીદી બાબતે ઓનલાઇન ટેન્ડર નબંર: 04,05, અને 06 મગંાિિામા ંઆિે છે. ઓન લાઇન ટેન્ડરો ભરિાની છેલ્લી તા:29-12-2015 અને

વપ્ર-બીડ મીટીંગ તા:14-12-2015ને 11.00 કલાકે છે ટેન્ડર www.nprocure.com ઉપર ભરી શકાશે જેની િધ ુવિગતો www.palanpuriti.org અને www.statetenders.com

ઉપરથી મેળિી શકાશે સદર ટેન્ડર/ટેન્ડરનો કોઇપણ ભાગ રદ કરિાનો કે જથ્થામા ં ફેરફાર કરિાનો હક્ક સસં્થાના િડાનો અબાધીત રહશેે. “કૌશલ્ય દ્વારા ઔદ્યોગિક ક્રાન્ન્ત” આચાયય, ઔદ્યોગિક તાલીમ સસં્થા,પાલનપરુ

http://www.nprocure.com/

http://www.palanpuriti.org/

http://www.statetenders.com/

INDUSTRIAL TRAINING INSTITUTE, PALANPUR

A. Tender No 04 (Tools & Equipment) / 2015-16 .Group 4-A (Auto)

Tender fee Rs. 500/- . (Five hundred only)

E.M.D. Amount Rs.13000/-.(Thirteen Thousand only)

B. Items Serial No. 01 to 49

C. Name and Address of Party :

D. Bid Meeting: date :14/21/2015Time : 11:00 AM .

E. Last date and time of online submission date: 29/12/2015Time:16:00 PM

F. Last date and time of physical submission (Tender fee, EMD & Other

supportingdocuments) date :30-12-2015Time: 15:00 hrs.

G. Documment opening Date :30-12-2015Time: 16:00 hrs.

H. Online Tender Opening date : 31-12-2015 Time : 11:00 AM .

PLACE : INDUSTRIAL TRAINING INSTITUTE, PALANPUR

Nr. SONARIYA BUNGLAW, BANAS DAIRY ROAD,

PALANPUR-385001. DIST: BANASKANTHA.

PHONE : (02742)252250

Principal

Industrial Training Institute,

Palanpur

A. Name and Address of Party :

B. Sales Tax / VAT Regi. No.

C. 1. Tender Fee Amount :

2.Name of Bank Draft No. Date.

3. E.M.D.Amount

4. Name of Bank Draft No. Date.

PLACE :

DATE Sign. And Stamp Of Party

Website for online tender submittion :http://www.nprocure.com


A. Tender No 04 (Tools & Equipment) / 2015-16 .Group 4-B (Civil)

Tender fee Rs.1000/- . (one thousand only)

E.M.D. Amount Rs.40000/-.(Fourty Thousand only)




E. Last date and time of online submission date : 29/12/2015Time:16:00 PM


supporting documents) date :30-12-2015Time: 15:00 hrs.






PHONE : (02742)252250

Principal


Palanpur





3. E.M.D.Amount


PLACE :

DATE

Sign. And Stamp Of Party

Website for online tender submittion :https://www.nprocure.com


A. Tender No04 (Tools & Equipment) / 2015-16 .Group 4-C (Electrical)

Tender fee Rs.1000/- . (one thousand only)

E.M.D. Amount Rs.25000/-.(Twenty Five Thousand only)












PHONE : (02742)252250

Principal


Palanpur

D. Name and Address of Party :

E. Sales Tax / VAT Regi. No.

F. 1. Tender Fee Amount :


3. E.M.D.Amount


PLACE :




A. Tender No 04 (Tools & Equipment) / 2015-16. Group 4-D (Electronics)

i. Tender fee Rs.500/- . (Five Hundred only)

ii. E.M.D. Amount Rs. 15000/-.(Fifteen Thousand only)





F. Last date and time of physical submission (Tender fee, EMD & Other supporting documents)

date :30-12-2015Time: 15:00 hrs.


F. Online Tender Opening date : 31-12-2015 Time : 11:00 AM .




PHONE : (02742)252250

Principal


Palanpur

G. Name and Address of Party :

H. Sales Tax / VAT Regi. No.

I. 1. Tender Fee Amount :


3. E.M.D.Amount


PLACE :


Website for online tender submittion :https:// www.nprocure.com

http://www.nprocure.com/


A. Tender No04 (Tools & Equipment) / 2015-16.Group 4-E (General)

Tender fee Rs.500/- . (Five Hundred only)

E.M.D. Amount Rs. 5000/-.(Five Thousand only)












PHONE : (02742)252250

Principal


Palanpur

J. Name and Address of Party :

K. Sales Tax / VAT Regi. No.

L. 1. Tender Fee Amount :


3. E.M.D.Amount


PLACE :



A. Tender No 04(Tools & Equipment) / 2015-16.Group 4-F (Mechanical)

Tender fee Rs.1000/- . (One Thousand only)

E.M.D. Amount Rs. 20000/-.(Twenty Thousand only)












PHONE : (02742)252250

Principal


Palanpur





3. E.M.D.Amount


PLACE :


Website for online tender submittion : www.nprocure.com


TERMS AND CONDITION OF TENDERS

Online tenders are invited from the sellers, traders and authorized dealers for tools and

equipments of various disciplines for Industrial Training Institute, Palanpur. Interested

parties who wish to participate in online tenders can download the tender documents from

the n-procure website. Bidders have to submit price bid in electronics format (online) only

on n-procure website till the last date & time for submission. Offer in physical form will not

be accepted in any case.

Submission of EMD, Tender fee, and other essential documents (should be submitted

separately for each group and in different covers) on or before 30/12/2015 up to 15.00

hrs. at

INDUSTRIAL TRAINING INSTITUTE,



Interested venders can take part in any one or all of the groups mentioned below and each

group will be evaluated separately.

Firms registered under small scale industries of Gujarat State & C.S.P.O. Gandhinagar/NSIC

or DGS&D, New Delhi for particular item proposed for procurement by the purchaser will

only be exempted from paying Tender Fee and Earnest Money Deposit provided they submit

the latest certified copy of the registration.

For more details visit us at websites (1)https://www.nprocure.com and

(2)www.palanpuriti.org (3) www.statetenders.com

1) The tenderer should invariably submit all the documents online.

2) Tender Fee (non-refundable) and EMD

I) Tender fee and EMD should be in form of Demand Draft payable to “Principal, Industrial Training Institute, Palanpur.

II) DD for Tender Fee and EMD must be issued by nationalized bank OR authorized

private bank (IDBI, UTI, HDFC and ICICI). DD from other than said banks will not be

considered and party issuing such DD will not be considered for further tender process without issuing any notice.

III) Tender fee will not be refundable.

IV) EMD should be separate for every group. In EMD cover tenderer must mentioned EMD for the ____ (name) group.


Conditions regarding exemptions from paying the Tender Fee and Earnest Money

Deposit (E.M.D.)

Those who are exempted for payment of Tender fee / EMD and tender fee must enclose necessary documents like SSI Registration (Gujarat State) along with NSIC/DGS&D/CSPO Registration

(a) Those Small, Cottage and tiny industrial units of the state having registration

numbers from Central Stores Purchase Organization National Small Industries Corporation / Director General of Supplies disposals.

(b) Institutions recognized by KhadiGramodyog Board having registration Certificate fromKhadiGramodyog Board, Khadi and village Commission (K.V.I.C.) or cottage

Industry. (c) Corporation doing productive activities like Gujarat Leather Industries Corporation

Ltd. Gujarat State Handicraft Development Corporation Ltd., Gujarat State Handicraft Development Corporation Ltd., Gujarat State Forest Development

Corporation Ltd. And such other corporation approved by the Industries and Mines Department for this purpose.

(d) Those Corporations not producing but providing market assistance to the Small, cottage& village Industries of the State and recognized by the government such

or G.S.I.C., GRIMCO etc.

(e) Industries, which have been set up through finance from State Government. Central Government under different schemes and having registration certificate for production of goods from concerned Districts Industries Centres.

3) Pre Bid Meeting :Pre Bid Meeting, last date of receiving documents, tender opening date will be mentioned in Advertisement and tender.

4) Technical Bid

I) Any party willing to participate in the tendering process must have atleast 50%

turnover of estimated total tender value group wise is in any of the last two Financial years.

II) Tender Fee, EMD & other documents like last three years return, CA certi., GST certi,

Shop & Establish certi, Turnover certi. of last two financial years must be submitted in

hard copy to INDUSTRIAL TRAINING INSTITUTE,



III) Rate, offered will be considered as inclusive of all Taxes.

IV) Tenderers are requested to note that their offer (price) must be valid for

acceptance for a period of 90 days from the date of opening of tender.The rate

mentioned in Tender should be with delivery of item at INDUSTRIAL TRAINING

INSTITUTE,



V) The rate mentioned in Tender should be of unit as demanded in tender. The quantity

mentioned in the tender is approximately and can be change. The item Specification

Mentioned in the Tender Cannot be change by Tenderer.

5) SAMPLE

Samples are required in tender for all items if specifically asked for it.

6) DELIVERY of STORES

I) Delivery period for supplying the stores should be one month from the order date. II) All the quantity of ordered of Tender item should be delivered at once to the institute

within one month, from the date of order. After the delivery limit, 0.5 percent penalty

will be deducted for each week. The deduction is applicable maximum 10 % for the order up to Rs. One Lack and 5 % for the order exceed Rs. One Lack.

7) INSPECTION AND QUALITY OF STORES

I) Inspections and checking of ordered stores will be done by our authorized persons at our

ITI.The payment will be done after the inspection of material by the institute. In case of

any rejection and duplication of Item, the party should carry back the same at his own expenses.our institute will not be responsible for any loss of such rejected stores laying

at our institute.

II) The quality of all the stores must be standard made and ISI marked. (wherever applicable)

8)The Principal, Industrial Training Institute, Palanpur reserves the rights to reject

tender / any Item in full or part tender without assigning any reason thereof.

9) The EMD deposited by the ordered party will be counted as a security deposit against the order. It will be Refunded after the full delivery of materials. And if the party will fail to deliver

within time limit, the said amount will not be refunded.

10) If the party is not interested to fill the rate of any item, he must mention " - " against the item. (Do not Fill 0 (zero) Otherwise the Tender can be cancelled.

11) Repeat order will be accepted under the rules & regulations of C.S.P.O. Gandhinagar.

12) The jurisdiction is Palanpur only. 13) Party must be submitted Terms and Conditions (01 to 13) with sign & Stamp.

I / We (Name of the Tenderer) _________________________________________

Proprietor / Partner / Director hereby undertake to supply stores confirmation to your Tender Enquiry specification and abide all terms and conditions of their tender enquiry as well as

invitation to tender and instructions to tenderers. Signature :

Name :

Place:

Date: Designation :

Stamp of the firm

TENDER No-4

Name Group From Sr. No. to Sr. No.

Total Items

Tender Fee

EMD

Tender -4 A Auto Sr. No. 1 to 49

49 500 13000

Tender -4 B

Civil

Sr. No. 50 to 97

48

1000 40000

Tender -4 C

Electrical

Sr. No. 98 to 163

66

1000 25000

Tender -4 D

Electronics

Sr. No. 164 to 199

36

500 15000

Tender -4 E General

Sr. No. 200 to 222

23 500 5000

Tender -4 F Mechanical

Sr. NO. 223 to 350

128 1000 20000

INDUSTRIAL TRAINING INSTITUTE PALANPUR

TOOLS & EQUIPMENTS ITEM LIST

Sr. No.

Group Name of item Qty

1 Auto Air blow gun with standard accessories 1 set

2 Auto Air impact wrench with standard accessories 1 set

3 Auto Air ratchet with standard accessories 8 set

4 Auto Anti theft device 1 no.

5 Auto Connecting rod alignment fixture 2 set

6 Auto Cylinder bore gauge capacity 20 to 160 mm with all accessories 3 Set

7 Auto Cylinder liner- Dry & wet liner, press fit &slidefit liner 2 set

8 Auto Dial gauge type 1 Gr. A (complete with clamping devices and with magnetic stand)

3 set

9 Auto Different type of Engine Bearing model (For Tavera) 2 set

10 Auto Different type of piston model 2 set

11 Auto Executive Auto Electrical tool kit (with all accessories) 1 set

12 Auto Functional/experiment model of different type of sensors. 1 set

13 Auto Glow plug tester 4 no.

14 Auto Granite surface plate 1600 x 1000 with stand and cover 1 no.

15 Auto Grease Gun heavy duty trolley type 10 kg capciaty 2 no.

16 Auto Hand operated hydraulic press 1 no.

17 Auto Hand Shear Universal 250mm 2 no.

18 Auto Horn and Horn relay (For Tavera) 2 set

19 Auto Injector-multi hole type,pintle type 4 no.

20 Auto Multi point fuel injection pump 1 no.

21 Auto Petrol nozzle 2 no.

22 Auto Piston ring groove cleaner 2 set

23 Auto Radiator pressure cap (For Tavera) 4 no.

24 Auto Rivet sets snap and Dolly combined 3mm, 4mm, 6mm 2 set

25 Auto SherTinmans 300mm 8 no.

26 Auto Solid Parallels in pairs (Different size) in Metric 2 set

27 Auto Spanner Clyburn 15 cm 1 no.

28 Auto Spanner T. flocks for screwing up and up-screwing inaccessible 4 no.

29 Auto Spanners socket with speed handle, T-bar, ratchet and universal upto 32 mm set of 28 pieces with box (Gedor)

26 set

30 Auto Spark lighter 2 no.

31 Auto Spring tension tester 2 no.

32 Auto Starter motor axial type, pre-engagement type & Co-axial type 1 no.

33 Auto Taps and wrenches – Metric (M-6 to M-20 by 1 mm) 3 set

34 Auto Temperature gauge with sensor 0-100 deg c 4 no.

35 Auto Tester sparking plug ‘NEON’ Type 1 no.

36 Auto Thermometer 0 to 100 deg Centigrade 2 no.

37 Auto Thermostat 4 no.

38 Auto Thread pitch gauge Metric, 1 set

39 Auto Thread pitch gauge metric, BSX, BSF, MC, MF & SAE 2 set

40 Auto Timing lighter 3 no.

41 Auto trade ware indicator 1 no.

42 Auto Tubed tyre of cars ,trucks & motorcycle 1 set

43 Auto Tubeless tyre of cars & trucks (Tavera and Tata) 1 set

44 Auto Tyre&split rim assembaly (Tavera and Tata) 1 set

45 Auto Tyre pressure gauge with holding nipple 1 no.

46 Auto Valve spring compressor universal. 1 no.

47 Auto Water pump for dismantling and assembling 5 no.

48 Auto Wiper motor assembly 2 set

49 Auto Wire Gauge (metric) 2 no.

50 Civil Ammonia printing machine with box 1 set

51 Civil Auto level 5 no.

52 Civil Binocular (Range 1 Km) 2 no.

53 Civil Boning rod 1 no.

54 Civil

Box drawing instrument containing one 15 cm compass with pin point, pin point & lengthening bar, one pair spring bows, rotating compass with interchangeable ink and pencil points, drawing pens with plain point & cross point, screw driver and box of leads.(0.2,0.3,0.4 mm).

63 set

55 Civil Canvas bag 8 no.

56 Civil Celluloid set square 45˚ & 60˚ 63 set

57 Civil Diagonal scale, electroplated 28 no.

58 Civil Drawing Board 1250mmx900mm with stand 21 no.

59 Civil Dumpy level 6 no.

60 Civil Engineer’s level 6 no.

61 Civil Engineering Instrument Box 63 no.

62 Civil Erasing shield small size 9 no.

63 Civil Flexible Curve 80 cm Long

4 no.

64 Civil French curve- set of 12 28 no.

65 Civil French Curve Set of three 13 no.

66 Civil

Geometrical models(wooden/plastic) as per given below: i) Cube 08 cm sides. ii) Rectangular parallel piped 8cmX15cm iii) Sphere 8cm dia. iv) Right circular cone 8 cm dia base and 15 cm vertical height v) Square pyramid 8cm side base and 15 cm vertical height vi) Cylinder 8 cm dia. 15 cm height. vii) Prisms triangular 8 cm sides triangle and 15 cm length. viii) Prism hexagonal 8 cm side’s hexagon and 15 lengths (set)

3 set

67 Civil Hand press for numbering & lettering 2 set

68 Civil Hones in case 1 no.

69 Civil Measuring Tape 150 cm 1 no.

70 Civil Metallic tape 20 m 10 no.

71 Civil Metric chain- 30 m & 20 m (set) 5 set

72 Civil Numbering punch set - 5 mm 1 set

73 Civil Planimeter (digital) 2 no.

74 Civil Plastic tubes for keeping drawings 21 no.

75 Civil Proportional dividers 15 cm

2 no.

76 Civil Protractor 15 cm full circular 44 no.

77 Civil Protractor celluloid 15 cm semi- circular.

25 no.

78 Civil Radius curve metric 3 mm to 15 mm

1 set

79 Civil Railway curves-Set of 50 in a box 1 set

80 Civil Ranging rod 4 m 30 no.

81 Civil Scale card board- metric set of eight A to H in a box 1: 1,1:2, 1:2:5, 1: 5, 1:10, 1:20, 1:50, 1:100,1:200, 1:500, 1:1000,1:2000,1:1250, 1:6000, 1:38 1/3, 1:66 2/3

63 set

82 Civil Scales plotting box wood 6 metric scales 30 cms long with offset scales.

53 no.

83 Civil Set square celluloid 25 cm,2mm thick with bevelled edges 60 degrees.

29 no.

84 Civil Set square transparent 20 cm, 2 mm thick with bevelled edges 45 degree .

41 no.

85 Civil Steel band 30 m & 20 m (each) 2 set

86 Civil Steel tape 30 meters long.

9 no.

87 Civil Steel Tape, 15 m length 62 no.

88 Civil Stencil set 5 set

89 Civil Survey plotting scale-8 scales with offset scale in box 21 set

90 Civil Surveyor’s umbrella with stand 6 no.

91 Civil T square 1250 mm/ Mini drafter 81 no.

92 Civil Template –Architects and builders

20 no.

93 Civil Templates – Circle, Ellipse, furniture, etc.

4 no.

94 Civil Tilting level 1 no.

95 Civil T-Square 1250mm/Mini drafter/ Parallel Bar

52 no.

96 Civil Wooden cross staff- box type 2 set

97 Civil Wooden cross staff- open type 2 set

98 Electrical 4 point relays 2 no.

99 Electrical 5 point relays 2 no.

100 Electrical A.C. ceiling fan (with remote, Havells, Orient, Usha) 1 no.

101 Electrical AC alternator slip ring puller 1 no.

102 Electrical AC moving iron type ammeter (various ranges) 3 no.

103 Electrical AC moving iron type voltmeter (various ranges) 1 no.

104 Electrical Ammeter 300A/ 60A DC with external shunt 1 no.

105 Electrical Auto Transformer type starter for 2 to 5 H.P. A.C Motors 2 no.

106 Electrical Automatic Reverse Forward starter 2 no.

107 Electrical Automatic star Delta starter 2 no.

108 Electrical Clamp on ammeter 0-25A,0-200A

4 no.

109 Electrical Combination pliers insulated 200 mm insulated

32 no.

110 Electrical Continuity tester 6 no.

111 Electrical Cut out Relay 2 no.

112 Electrical D.O.L starter(for 3 phase 440V) 2 no.

113 Electrical DC moving coil miliammeters( various ranges) 3 no.

114 Electrical DC Ohmmeter 0 to 300 Ohms, mid scales at 20 Ohms 2 no.

115 Electrical DC Power supply 250v DC , 25 Amp 2 no.

116 Electrical Earth leakage circuit breaker (ELCB) 220V/25mA

4 no.

117 Electrical Electric Automatic steam press (Iron, Havells, Orient Usha) 5 no.

118 Electrical Electrical tachometer 1 no.

119 Electrical Electrician knife (Two side blade) 63 no.

120 Electrical Electro magnetic and transformer 1 no.

121 Electrical Flux meter 2 no.

122 Electrical Fuel injection pump dismantling tool kit /Universal Vice 2 set

123 Electrical Growler 4 no.

124 Electrical Hot wire Ammeter 0-15 Amps.

2 no.

125 Electrical Hygrometer 2 no.

126 Electrical Insulated combination pliers 150 mm 63 no.

127 Electrical Insulated side cutting pliers 150 mm 63 no.

128 Electrical Kilo Wattmeter 0-1-3 kw 1 set

129 Electrical Knife Switch DPDT fitted with fuse terminals 16 amp (Raw Material)

8 set

130 Electrical Knife Switch TPDT fitted with fuse terminals 16 amp (Raw Material)

8 set

131 Electrical Lead Acid battery 75Ah, 12V 2 no.

132 Electrical Long nose pliers 150 mm 63 no.

133 Electrical Lux meter 2 no.

134 Electrical Magnetic flow meter 1 no.

135 Electrical Magneto spanner set 2 set

136 Electrical Metal clad circuit breaker (MCCB) 220V/1A

4 no.

137 Electrical Miniature circuit breaker(MCB) 220V/ 6 Amps

4 no.

138 Electrical Mixture & Grinder (Maharaja, Havells, Usha) 2 no.

139 Electrical Neon (phase) tester 230 volt 68 no.

140 Electrical Neon tester 500 V. 63 no.

141 Electrical Ohm meter 2 no.

142 Electrical Over load Relay 2 no.

143 Electrical Pin type, Shackle type & Suspension type insulators, (Raw Material) 4 set

144 Electrical Plier flat Nose 100 mm 9 no.

145 Electrical Pliers flat nose 150 mm 4 no.

146 Electrical Pliers round nose insulated 200mm 2 no.

147 Electrical Power Meter 2 no.

148 Electrical Rectifier bridge rectifier and power supply regulated power supply 1 no.

149 Electrical Reverse current Relay 2 no.

150 Electrical Rheostate 0- 300 Ohm, 1 Amp 2 set

151 Electrical Screw Driver, 100 mm (insulated) 69 no.

152 Electrical Semi-automatic star Delta starter 2 no.

153 Electrical Set of Wall jumper octagonal 37mm X 450mm & 37 X600mm

6 set

154 Electrical Single phasing preventer 415V 1 no.

155 Electrical Small crimping tools (assorted) 10 – 100 mm (5nos) 102 set

156 Electrical Soft starter 1ph 2 no.

157 Electrical Solar street light lamp set 12v , 18 / 24 watts 8 set

158 Electrical Tachometer digital type Non contact type 0-6000 RPM 2 no.

159 Electrical Two point starter for DC series motor 2 no.

160 Electrical Used DC Generator for over hauling Shunt, series, compound (each)

2 set

161 Electrical Watt hour meter induction type 1 ph 2 no.

162 Electrical Wheatstone Bridge 2 no.

163 Electrical Wiring board on stand 3 meter x1 meter with 0.5 meter projection on the top

32 no.

164 Electronics Anti static pads 4 no.

165 Electronics Anti static wrist wraps 4 no.

166 Electronics Blu-Ray drive and player 2 set

167 Electronics Cartridges for printer (Samsung ML-1610, HP Laser jet -1015, each 3)

3 set

168 Electronics Computer Toolkits 6 set

169 Electronics Copper bit soldering iron 0.25 Kg 2 no.

170 Electronics De- soldering pump 63 no.

171 Electronics Digital Web Cam (High Resolution) 7 no.

172 Electronics External DVD Writer 2 no.

173 Electronics External Solid State Hard Disk 1 TB 3 no.

174 Electronics Game video card 2 no.

175 Electronics Hard Disk (500 GB or better) different types 4 no.

176 Electronics Modem 1 no.

177 Electronics Monochromatic light source 1 no.

178 Electronics Motherboard Cabinets 4 no.

179 Electronics Motherboards (of different make) 4 no.

180 Electronics Network storage 2 no.

181 Electronics Optical Drives 4 no.

182 Electronics POE adapters 2 no.

183 Electronics Potentiometer / thermocouple test set 1 set

184 Electronics SC Couplers 12 no.

185 Electronics SC Pigtails 12 no.

186 Electronics SMPS Tester 4 no.

187 Electronics Soldering iron 10W 6 no.

188 Electronics Soldering Iron 240W 1 no.

189 Electronics Soldering Iron 350 gm. 2 no.

190 Electronics Soldering Iron Changeable bits 25 W 63 no.

191 Electronics Standalone Hard Disks 500 GB or Higher 8 no.

192 Electronics Standard Screw Driver Set (for computer Repairing) 2 set

193 Electronics Switch with POE ports 2 no.

194 Electronics Tubular box spanner (set of 6nos) 1 set

195 Electronics Tweezers 100mm 63 no.

196 Electronics Twiser fine point 125 mm 21 no.

197 Electronics USB mini dongle for blue tooth device connection 12 no.

198 Electronics Welding Process Inspection and codes DVD /CDs 1 no.

199 Electronics Wireless Network Adapter 6 no.

200 General Dummy Lady , men ,kid(different size) 2 no.

201 General Fire buckets with stand 9 set

202 General Garment Hangers 17 no.

203 General Hand Held Vacuum cleaner 1 no.

204 General Leather apron. 2 no.

205 General Pattern Hanging Stand 4 no.

206 General Pattern Notcher 5 no.

207 General Pattern Punch 5 no.

208 General Rubber mat (Size as per requirement) 5 no.

209 General Safety goggles. 155 set

210 General Scissors 200mm 1 no.

211 General Scissors 25 cm 14 no.

212 General Seam Ripper 17 no.

213 General Sprayer 5 no.

214 General Stand for hanging dresses 5 no.

215 General Table Sharpener 4 no.

216 General Tailor’s Card Scale Triangular 14 no.

217 General Thimble 1 no.

218 General Thread Cutter 17 no.

219 General Digital Electronic Wall Clock (D WOOD White) Digit size - date, month, year -1.2 inch, hour,minute, second - 1.8 inch, day , temperature -1 inch, clock size 396X296X31 mm.

2 no.

220 General Waste Bin (medium size) 10 no.

221 General Water Tub 60 cm dia 1 no.

222 General Foot print Grip 250mm 4 no.

223 Mechanical Adjusable spanner 38 cm long. 2 no.

224 Mechanical Adjustable pipe chain tonge to take pipes up to 300 mm. 3 no.

225 Mechanical Adjustable spanner 300 mm 60 no.

226 Mechanical Allen Hexagonal keys 2.5 to 12 2 set

227 Mechanical Allen key set (set of 9) 2 set

228 Mechanical Allen Key set of 12 pieces (2mm to 14mm) 12 set

229 Mechanical Angle Gauge for tool grinding 6 no.

230 Mechanical Angle Plate 10 x 20 cm. 1 no.

231 Mechanical Angle plate 150 × 100 2 no.

232 Mechanical Angle plate adjustable 250 x 150 x 175 mm 3 no.

233 Mechanical Angle Plate with slots 200 mm 4 no.

234 Mechanical Angle turning attachment 1 no.

235 Mechanical Anvil 50 kg. 1 no.

236 Mechanical Auto Darkening Welding Helmet 2 no.

237 Mechanical Base chuck for slotter 1 no.

238 Mechanical Belt Tensioner gauge 2 no.

239 Mechanical Bench vice 150mm (24 Kg, Nice) 2 no.

240 Mechanical Bevel gauge 200 mm 1 no.

241 Mechanical Bore dial gauge stems – 12 to 35 mm, 35 to 65 mm., dial gauge indicator of 0.01 accuracy.

1 set

242 Mechanical Box spanner set 6-25 mm set of 8 with tommy bar 3 set

243 Mechanical Caliper 15 cm Hermaphrodite. 3 no.

244 Mechanical Caliper inside spring joint 150 mm 13 no.

245 Mechanical Caliper out side spring joint 150 mm 23 no.

246 Mechanical Carbide tipped tools of different sizes and shapes (throw away tips) 2 set

247 Mechanical Carbide Wear Block 1 mm - 2 mm. 6 set

248 Mechanical Chisel cold 9 mm diamond 11 no.

249 Mechanical Chisel Cold flat 10 cm. 2 no.

250 Mechanical Chisel Cold flat 20 mm X 150 mm 7 no.

251 Mechanical Chisel cross cut 200mmX 6mm 2 no.

252 Mechanical Chisel cross cut 9 mm X 150 mm 16 no.

253 Mechanical Chisel- steel 80 mm blade 30 no.

254 Mechanical Chronometric type tachometer 1 no.

255 Mechanical Clamp toolmaker 5 cm and 7.5 cm set of 2. 1 set

256 Mechanical Clamps C 100mm 2 no.

257 Mechanical Clamps C 200mm 2 no.

258 Mechanical CNC hole machining tools assorted 1 set

259 Mechanical CNC milling tools assorted 1 set

260 Mechanical Cold set rodded 25 x 200 mm. 6 no.

261 Mechanical Collapsible Tap with attachment 2 set

262 Mechanical Combination Drill 4 no.

263 Mechanical Combination Drill A-2.5 and A-1 1 set

264 Mechanical Combination set 300 mm (Complete Set With rule) 4 set

265 Mechanical Comparators stand with dial indicator LC 0.01 mm. 3 no.

266 Mechanical Complete set of taps and dies in Metric (8, 10,12 mm) 1 set

267 Mechanical Compound angle vice (standard sine) 1 no.

268 Mechanical Conduit pipe cutting and threading machines adjustable for 15mm to 30mm.

2 no.

269 Mechanical Connecting screwdriver 100 mm 63 no.

270 Mechanical Conventry Type Die Head ( Self opening ) 1 no.

271 Mechanical Coriolis mass flow meter 1 no.

272 Mechanical Coventry Die head 2 no.

273 Mechanical Cylindrical cutter 80 x 90 bore dia. 3 no.

274 Mechanical Dead weight tester 1 no.

275 Mechanical Depth micrometer 0-25mm 4 no.

276 Mechanical Dial vernier caliper 0 -200 mm LCO 0.05 mm. (Universal type) 1 no.

277 Mechanical Die Handle 1 no.

278 Mechanical Digimatic electronic outside Micrometer (0 to 25 mm & 25 to 50 mm) LC 0.001 mm.

1 no.

279 Mechanical Digital Micrometer 0 - 25 mm outside. L.C. 0.001 mm 4 no.

280 Mechanical Digital Vernier caliper 0 - 150 mm. L.C. 0.001 mm. (Optional) 4 no.

281 Mechanical Digital vernier caliper 0- 300 mm 1 no.

282 Mechanical Divider Spring Joint 150 mm 16 no.

283 Mechanical Double angle unequal cutter 50 x 12 x 60° 1 no.

284 Mechanical Double ended spanner (metric 6X7 to 30X32) (set) 1 set

285 Mechanical Drill point angle gauge 1 no.

286 Mechanical Drill twist 1.5 mm to 15 mm (various sizes) by 0.5 mm 2 set

287 Mechanical Drill twist straight shank 8 mm to 15 mm by 1/2 mm 1 set

288 Mechanical Engineers screw driver

22 no.

289 Mechanical Engineer's try square (knife - edge) 150 mm blade. 1 no.

290 Mechanical File cut saw 15 cm smooth 9 no.

291 Mechanical File flat 25 cm. smooth. 31 no.

292 Mechanical File Flat 2nd cut 200 mm 71 no.

293 Mechanical File flat 2nd cut 250 mm 47 no.

294 Mechanical File Flat 300 mm rough 15 no.

295 Mechanical File flat round 150mm smooth 2 no.

296 Mechanical File half round 250 mm 2nd cut 13 no.

297 Mechanical File half round second cut 15 cm. 6 no.

298 Mechanical File hand smooth 200 mm 12 no.

299 Mechanical File knife edge 15 cm smooth 8 no.

300 Mechanical File round 250 mm smooth 48 no.

301 Mechanical File Swiss type needle sewt of 12 4 no.

302 Mechanical File triangular 15 cm smooth 2 no.

303 Mechanical Files assorted sizes and types including safe edge file (20 Nos) 2 set

304 Mechanical Flat File 35 cm bastard 4 no.

305 Mechanical Flatters (rodded) 55 mm square. 1 no.

306 Mechanical Forge with hand blower 38 cm to 45 cm 1 no.

307 Mechanical Gauge Drill Grinding 1 no.

308 Mechanical Gauge plug single 3 ended 5 to 55 by 5 mm set of 11 pcs. 1 set

309 Mechanical Hacksaw frame fixed 300 mm 6 no.

310 Mechanical Hammer B.P. 0.5 kg. 9 no.

311 Mechanical Hammer ball pain 250 gms. With handle 47 no.

312 Mechanical Hammer ball peen 0.22 kg. With handle. 30 no.

313 Mechanical Hammer copper 1 Kg with handle 4 no.

314 Mechanical Hammer copper/brass 500 gm with handle 6 no.

315 Mechanical Hammer lead 1 kg. 2 no.

316 Mechanical Hammer Mallet 2 no.

317 Mechanical Hand Chaser M-12 & M-16 ( External ) 2 set

318 Mechanical Hand Chaser M-12 & M-16 (Internal ) 2 set

319 Mechanical Hand operated crimping tool (i) for crimping up to 4mm and (ii) for 2 no.

crimping up to 10mm

320 Mechanical Hand Reamer adjustable cover max 9, 12, 18 mm - set of 3 3 set

321 Mechanical Hand Reamer taper max 4 -9 mm set of 6 OR 4 -7 mm set of 4. 2 set

322 Mechanical Hand reamers adjustable 10.5 to 11.25 mm, 11.25 to 12.75 mm, 12.75 to 14.25 mm and 14.25 to 15.75 mm

2 set

323 Mechanical Handsaw 450mm 1 no.

324 Mechanical Hardle. 4 no.

325 Mechanical Hot set rodded 25 x 200 mm. 1 set

326 Mechanical Impact screw driver 2 no.

327 Mechanical Knurling tools (set of 3) straight and diamond 1 set

328 Mechanical Lathe Mandrels (Diff. Types) 1 no.

329 Mechanical Left cut snips 250mm 8 no.

330 Mechanical Letter Punch set - 5 mm. 1 set

331 Mechanical Low pressure measuring gauges such as thermal conductivity gauge and Mcloyd gauge

1 no.

332 Mechanical Machine vice 100 mm 1 no.

333 Mechanical Machine vice 160 mm swivel base

2 no.

334 Mechanical Machine vice 200 mm swivel base 3 no.

335 Mechanical Magnifying lenses 75mm with light 5 no.

336 Mechanical Micrometer 25-50 mm outside

1 no.

337 Mechanical Morse Taper Plug & Ring Gauge no. 0 to 7 MT 1 set

338 Mechanical Mortie Chisel 2 no.

339 Mechanical Number drills H.S.S. (parallel shank) 1 set

340 Mechanical Odd leg calliper 200mm 2 no.

341 Mechanical Orifice type flow meter 1 no.

342 Mechanical Outside spring caliper 150 mm 7 no.

343 Mechanical

Parallel shank end mills Ø6, Ø10 and Ø 16 are (double fluted),

Ø 20 mm & Ø 25mm (four fluted) 4 set

344 Mechanical Philips screw driver 200 mm 2 no.

345 Mechanical Pipe bender spool type up to 25 mm with stand manually operated 3 no.

346 Mechanical Pipe cutting tool 2 no.

347 Mechanical Pipe Die with Die stock solid die 10/12 with die stock 2 no.

348 Mechanical Plain Ring and Plug Gauge 12 to 50 mm by 1mm 1 no.

349 Mechanical Planishing Hammer. 1 no.

350 Mechanical Plier combination, 200 mm 2 no.


I. Tender No-5 (Tools &Rawmaterial) /2015-16 .Group 5-A (Electrical)

Tender fee Rs. 1000/- . (One Thousand only)

E.M.D. Amount Rs.20000/-.(Twenty Thousand only)

J. Items Serial No. 01 to 152

K. Name and Address of Party :

L. Bid Meeting: date :14/21/2015Time : 11:00 AM .

M. Last date and time of online submission date: 29/12/2015Time:16:00 PM

N. Last date and time of physical submission (Tender fee, EMD & Other supportingdocuments)

date :30-12-2015Time: 15:00 hrs.

O. Documment opening Date :30-12-2015Time: 16:00 hrs.

P. Online Tender Opening date : 31-12-2015 Time : 11:00 AM .




PHONE : (02742)252250

Principal


Palanpur

M. Name and Address of Party :

N. Sales Tax / VAT Regi. No.

O. 1. Tender Fee Amount :


3. E.M.D.Amount


PLACE :




I. Tender No 05 (Tools &Rawmaterial) / 2015-16 .Group 5-B (Electronics)


E.M.D. Amount Rs.3000/-.(Three Thousand only)




M. Last date and time of online submission date : 29/12/2015Time:16:00 PM

N. Last date and time of physical submission (Tender fee, EMD & Other supporting

documents) date :30-12-2015Time: 15:00 hrs.






PHONE : (02742)252250

Principal


Palanpur

D. Name and Address of Party :

E. Sales Tax / VAT Regi. No.

F. 1. Tender Fee Amount :


3. E.M.D.Amount


PLACE :

DATE




I. Tender No-05 (Tools &Rawmaterial)) / 2015-16 .Group 5-C (Plumber)


E.M.D. Amount Rs.2000/-.(Two Thousand only)




M. Last date and time of online submission date : 29/12/2015Time:16:00 PM

N. Last date and time of physical submission (Tender fee, EMD & Other supporting

documents) date :30-12-2015Time: 15:00 hrs.






PHONE : (02742)252250

Principal


Palanpur

P. Name and Address of Party :

Q. Sales Tax / VAT Regi. No.

R. 1. Tender Fee Amount :


3. E.M.D.Amount


PLACE :




H. Tender No05 (Tools &Rawmaterial)) / 2015-16 .Group 5-D (Mechanical)

i. Tender fee Rs.1000/- . (One Thousand only)

ii. E.M.D. Amount Rs. 24000/-.(Twenty four Thousand only)

I. Items Serial No. 219 to 328

J. Name and Address of Party :

K. Bid Meeting: date :14/12/2015Time : 11:00 AM .

L. Last date and time of online submission date : 29/12/2015Time:16:00 PM

M. Last date and time of physical submission (Tender fee, EMD & Other supporting documents)

date :30-12-2015Time: 15:00 hrs.

N. Documment opening Date :30-12-2015Time: 16:00 hrs.

G. Online Tender Opening date : 31-12-2015 Time : 11:00 AM .




PHONE : (02742)252250

Principal


Palanpur

S. Name and Address of Party :

T. Sales Tax / VAT Regi. No.

U. 1. Tender Fee Amount :


3. E.M.D.Amount


PLACE :


Website for online tender submittion :https:// www.nprocure.com











hrs. at














V) Tender fee and EMD should be in form of Demand Draft payable to “Principal,

Industrial Training Institute, Palanpur.

VI) DD for Tender Fee and EMD must be issued by nationalized bank OR authorized private bank (IDBI, UTI, HDFC and ICICI). DD from other than said banks will not be considered and party issuing such DD will not be considered for further tender process

without issuing any notice.

VII) Tender fee will not be refundable.

VIII) EMD should be separate for every group. In EMD cover tenderer must mentioned EMD

for the ____ (name) group.


Conditions regarding exemptions from paying the Tender Fee and Earnest Money Deposit (E.M.D.)

Those who are exempted for payment of Tender fee / EMD and tender fee must enclose necessary documents like SSI Registration (Gujarat State) along with NSIC/DGS&D/CSPO

Registration

(a) Those Small, Cottage and tiny industrial units of the state having registration numbers from Central Stores Purchase Organization National Small Industries Corporation / Director General of Supplies disposals.

(b) Institutions recognized by KhadiGramodyog Board having registration Certificate

fromKhadiGramodyog Board, Khadi and village Commission (K.V.I.C.) or cottage Industry.

(c) Corporation doing productive activities like Gujarat Leather Industries Corporation Ltd. Gujarat State Handicraft Development Corporation Ltd., Gujarat State

Handicraft Development Corporation Ltd., Gujarat State Forest Development Corporation Ltd. And such other corporation approved by the Industries and Mines

Department for this purpose. (d) Those Corporations not producing but providing market assistance to the Small,

cottage& village Industries of the State and recognized by the government such or G.S.I.C., GRIMCO etc.

(e) Industries, which have been set up through finance from State Government. Central Government under different schemes and having registration certificate

for production of goods from concerned Districts Industries Centres.


4) Technical Bid

VI) Any party willing to participate in the tendering process must have atleast 50%

turnover of estimated total tender value group wise is in any of the last two Financial

years.

VII) Tender Fee, EMD & other documents like last three years return, CA certi., GST certi,





VIII) Rate, offered will be considered as inclusive of all Taxes.

IX) Tenderers are requested to note that their offer (price) must be valid for



INSTITUTE,



X) The rate mentioned in Tender should be of unit as demanded in tender. The quantity



5) SAMPLE



III) Delivery period for supplying the stores should be one month from the order date. IV) All the quantity of ordered of Tender item should be delivered at once to the institute




III) Inspections and checking of ordered stores will be done by our authorized persons at our



at our institute.

IV) The quality of all the stores must be standard made and ISI marked. (wherever applicable)











Name :

Place:

Date: Designation :

Stamp of the firm

TENDER No-5


Total Items

Tender Fee

EMD

Tender -5 A Electrical Sr. No. 1 to 152

152

1000 20000

Tender -5 B Electronics

Sr. No. 153 to 208

53 500 3000

Tender -5 C Plumber

Sr. No. 209 to 218

10 500 2000

Tender -5 D

Mechanical

Sr. No. 219 to 328

110

1000 24000


TOOLS &RAWMATERIALSITEM LIST

Sr.

No. Group Name of item Qty Unit

1 Electrical D.E. PEDETAL GRINDER WITH TWO WHEEL 175MM ROUGH AND

MOOTH 1 no.

2 Electrical Electric pump, 1 HP (Monoblock) 1 no.

3 Electrical Hand drill 12mm capacity with drill chuck (Electric) 4 no.

4 Electrical Water Heater 10 litre 1 no.

5 Electrical 1 mm sq. Copper lug (ring type) 30 no.

6 Electrical 1 mm sq. PVC flexible single core wire ( FENILOX,ANCHOR,L&T) 3 coil

7 Electrical 1.5 mm sq. PVC Insulated copper Flexible wire (

FENILOX,ANCHOR,L&T) 4 coil

8 Electrical 16 AMP MCB SINGLE PHASE (ANCHOR,HAVELLS,L&T) 1 NO

9 Electrical 2 Pin, 3 Pin Multi plug 5 Amp, 230V (ANCHOR,HAVELLS,L&T) 28 set

10 Electrical 2 Point DC motor starter for 3 HP series motor

(ANCHOR,HAVELLS,L&T) 1 no.

11 Electrical 2 Pole MCB 16 Amp (ANCHOR,HAVELLS,L&T) 1 no.

12 Electrical 2 Pole MCB 5 Amp (ANCHOR,HAVELLS,L&T) 1 no.

13 Electrical 25 mm sq. ferrul connector Alluminium 10 no.

14 Electrical 3 and 4 way junction box for conduit pipe 3/4 inch (white) (1.5 MM) 5 set

15 Electrical 3/20 PVC copper wire (90 meter coil, Anchor, Finolex, L&T) 4 coil

16 Electrical 4 mm sq copper flexible wire (Anchor, Finolex, L&T) (2-red, 2-

yellow, 2-blue, 1-black) 7 coil

17 Electrical 5 PIN PLUG (HIFI-E CLASS) 10 NO

18 Electrical 5 Pin socket 5 Amp. (HIFI-E CLASS) 80 no.

19 Electrical ACSR conductor 7 meter

20 Electrical Aluminium Lug 2.5, 4, 10 mm sq 40 set

21 Electrical Ameter 0-15A, MI type , round shaped panel boad type 4 no.

22 Electrical Angle Holder 6 Amp 50 no.

23 Electrical Banana connector different type 100 no.

24 Electrical Banana Terminal 16 Amp 20 no.

25 Electrical Battern Holder 6 Amp 100 no.

26 Electrical BATTERY 45 AMP ( WITH WATER) 1 NO

27 Electrical Binding wire 14 SWG (Alluminium) 1 kg

28 Electrical Bottle type Fuse 10 no.

29 Electrical Bulb 60 W, 100 W (Philips, Bajaj, Surya) 10 set

30 Electrical C channel 32 mm 20 feet

31 Electrical Cable gland brass 32 mm 14 no.

32 Electrical Cable lug 25 mm sq (Alluminium ring type) 40 no.

33 Electrical Cable Lug Alluminium 25 mm Sq. 20 no.

34 Electrical Cable lug copper Ring type (25, 16, 10, 6, 4, 2.5 mm sq) 20 set

35 Electrical CAPACITOR 2.5,36,45,80,100 FERAD 2 set

36 Electrical Capacitor for motor 50-60 mf for 1/4 hp motor 4 no.

37 Electrical Catridge Fuse 10 no.

38 Electrical Ceiling rose (2 plated) 20 no.

39 Electrical CFL LAMP 15 W 2 no.

40 Electrical CFL LAMP 20 W 2 NO

41 Electrical CFL LAMP 25 W 3 NO

42 Electrical Conduit coupling 3/4 inch 5 no.

43 Electrical Conduit Pipe 3/4 inch (white) (1.5 MM THICK) 10 no.

44 Electrical Contactor 16 Amp 4 no.

45 Electrical Contactor 16 Amp with 1 NO + 1NC 4 no.

46 Electrical Copper Lug 2.5, 4 mm sq 10 set

47 Electrical Copper Lugs 2.5 mm sq 20 no.

48 Electrical DC 3 Point starter, for 1Hp 250V motor L&T 1 no.

49 Electrical DC 4 Point starter, for 3 Hp motor L&T 4 no.

50 Electrical Digital A-meter AC 0 to 1 Amp (MI Type) 2 no.




54 Electrical Digital A-meter DC 0 to 10 Amp (MC Type) 10 no.


56 Electrical Digital A-meter DC 0 to 20 Amp 1 no.


58 Electrical Digital Voltmeter 0 to 500 volt (MC Type) 10 no.

59 Electrical Digital Voltmeter 0 to 500 volt (MI Type) 12 no.

60 Electrical Digital Voltmeter DC 0 TO 300 V 1 no.

61 Electrical

DIGITAL WALL CLOCK ( D WOOD WHITE) DIGIT SIZE-

(1)DATE,MONTH,YEAR- "1.2 ", (2) HOUR, MINUTE, SECOND-1.8", (3)

DAY AND TEMP.-1.0 ", COLCK SIZE- 396X296X31 MM)

9 NO

62 Electrical DOL STARTER FOR 0.5 HP MOTOR ( RELAY RANGE 0.5 AMP TO 1.5

AMP) L&T 1 no.

63 Electrical DPDT SWITCH RECTANGULAR FOR WIRING 10 NO

64 Electrical ELCB 30 mA, single phase, 230 V AC ( ANCHOR,HAVELLS,L&T) 2 no.

65 Electrical Electric Bell (Ding dong type) 2 no.

66 Electrical Electric Buzzer 230 V 6 no.

67 Electrical Electric Iron (ઇસ્ત્રી) coil 2 no.

68 Electrical Electronics Fan Regulator PLUG TYPE MODULAR TYPE

(HAVLLES,HIFI,ANCHOR) 15 no.

69 Electrical EXTENSION BOARD WITH 5 PIN 10 MTR. LONG (ANCHOR,HAVELLS) 2 NO

70 Electrical Fan capacitor 2.5 mfd (USHA.CROMPTON) 70 no.

71 Electrical FAN CAPACITOR 3 3.0 mfd (USHA.CROMPTON) 5 NO

72 Electrical Field Regulator 0 to 200 ohm, 10 Amp, 2.5 KW 4 no.

73 Electrical Flash type Fuse, 15 Amp 20 no.

74 Electrical Flash type indicatintg lamp 20 no.

75 Electrical Frequency meter 0-50 Hz, 230V 1 no.

76 Electrical Fully Automatic star delta starter for 3 Phase, 10 HP, 7.5KW, 415 V

Motor 1 no.

77 Electrical Fuse Wire reel 16 A (100 gram reel) 1 reel

78 Electrical Gang Box 1+ 0 (1 way) 40 no.

79 Electrical Gang Box 1+1 (2 way) 20 no.

80 Electrical Gang Box 3 way 12 no.

81 Electrical

Gang Box 3+1 (4 way)

20 no.

82 Electrical Gang box 4-way with box

17 no.

83 Electrical HIGH TENSION BATTERY CABLE WITH CROCODILE JAW 12 V 2 NO

84 Electrical HRC Fuse

10 no.

85 Electrical ICDP switch 16 Amp (Anchor, Havells, L&T) 3 no.

86 Electrical ICTP swich 32 Amp (Anchor, Havells, L&T) 2 no.

87 Electrical ICTP switch 16 Amp (Anchor, Havells, L&T) 2 no.

88 Electrical ICTP Switch 63 Amp 415 V (Anchor, Havells, L&T) 1 no.

89 Electrical Indicating lamp (panel board type) 1 no.

90 Electrical Insulatation varnish 2 Litre

91 Electrical Intermediate switch 5 Amp 2 no.

92 Electrical Joint kit 16 mm sq 4 no.

93 Electrical Kit kat fuse 16 A 415V 20 no.

94 Electrical Lamp 200W (Bajaj, surya, Phillips) 40 no.

95 Electrical LED (Red, blue, green) 40 set

96 Electrical LED BULB 14 W(PHILIPS, SYSKA) 5 NO

97 Electrical Maintainance free battery 12 V, 35 A EXIDE 3 no.

98 Electrical Male Female Plug socket 5 Amp 18 set

99 Electrical MCB 10 Amp Double pole WITH COVER (Anchor, Havells, L&T) 2 no.

100 Electrical MCB 16 Amp Double pole WITH COVER (Anchor, Havells, L&T) 2 no.

101 Electrical MCB 32 Amp 4 pole WITH COVER (Anchor, Havells) 10 no.

102 Electrical MCB 4 POLE WITH COVER C-40 240/415 V ( L&T) 5 NO

103 Electrical Mercury float swich 4 no.

104 Electrical Mercury vapour Lamp with complete fitting 400 Watt 2 set

105 Electrical Neon sign Tube with complete fitting 1 no.

106 Electrical Neutral connector strip 4 to 6 point 5 no.

107 Electrical Overload ralay 5-8 Amp 4 no.

108 Electrical Panel mounted Low rupturing capacity fuse 10 no.

109 Electrical Pendent switch ( HIFI-E CLASS, HAVELLS) 23 no.

110 Electrical PHILLIPS ESSENTILE LED 1200 MM, 20W840 T8 IND l LED TUBE

LIGHT 10 NO

111 Electrical Piano type one way switch ( HIFI-E CLASS, HAVELLS) 40 no.

112 Electrical Pin type insulators 4 no.

113 Electrical Probe with crocodile pin (Multi purpose red and black coloured) 20 set

114 Electrical PVC Board 4 "X4", 4"X6", 6"X8", 8"X10" 12 set

115 Electrical PVC Casing caping T and Elbo 3/4 Inch 10 set

116 Electrical PVC Casing capingpatti 3/4 Inch 30 no.

117 Electrical PVC CONDUIT PIPE 1" WHITE (1.5 MM) 10 NO

118 Electrical PVC Insulated Armerd cable 25 mm sq 20 feet

119 Electrical PVC round block 40 no.

120 Electrical Rawl Plug 3 Dozen

121 Electrical Rawl Plug 10X35, 14X35 25 set

122 Electrical RCCB (ELCB) 30 mAmp, 25 mAmp, single phase 3 set

123 Electrical Rectifier unit 25 Amp, 230V Dc 2 no.

124 Electrical Rehostate for 3 HP DC series motor 1 no.

125 Electrical Remote Push botton (on/off) 5 set

126 Electrical Rheostate 200 Ohm, 5 Amp 4 no.

127 Electrical Series light flasher circuit 9V 2 no.

128 Electrical Shackle type insulator 2 no.

129 Electrical Sodium vapour lamp with complete fitting 400 watt 2 set

130 Electrical SPARK LIGHTER ( ELECTRIC) 2 NO

131 Electrical SPDT SWITCH RECTANGULAR FOR WIRING 10 NO

132 Electrical Spiral flexible PVC Band 10 feet

133 Electrical Start Push botton switch with one NO contact 10 no.

134 Electrical Stop Push Botton with one NC contact 10 no.

135 Electrical Strip for LED Lighting 6 meter

136 Electrical Switch socket combined with indicator and Fuse 15 A, 230V 18 no.

137 Electrical Switch type indicating lamp 10 no.

138 Electrical T, L for conduit pipe 3/4 inch (white) 40 set

139 Electrical T-5 TUBE LIGHT COMPLETE SET 12 NO

140 Electrical T-5 TUBE LIGHT STICK 12 NO

141 Electrical Thermostate switch with wire 6A, 240V 5 no.

142 Electrical Three phase voltage selector switch 9 no.

143 Electrical Timer for star Delta starter 4 no.

144 Electrical Transformer Oil 2 Litre

145 Electrical Tubelight with COMPLETE AND TUBE fixture (40W, 230V) 12 set

146 Electrical Two Pin plug Top 5 Amp(Anchor, Havells, HIFI, L &T) 68 no.

147 Electrical Two pin socket 5 Amp, 230V (Anchor, Havells, HIFI, L &T) 18 no.

148 Electrical Two way switch (Anchor, Havells, HIFI, L &T) 40 no.

149 Electrical Vibrating bell 230V 4 no.

150 Electrical Voltmeter 0-150V, MI type , round shaped panel boad type 2 no.

151 Electrical Voltmeter 0-500V, MI type , round shaped panel boad type 5 no.

152 Electrical Water proof insulation tape ( ANCHOR) 30 no.

153 Electronics AND Gate kit 3 no.

154 Electronics Common Emitter Amplifier kit 2 no.

155 Electronics NAND Gage kit 3 no.

156 Electronics NOR Gate kit 3 no.

157 Electronics OR Gate Kit 3 no.

158 Electronics Regulated IC 7812 32 no.

159 Electronics 24 PORT SWITCH FOR LAN D-LINK 2 NO

160 Electronics AA CELL ( BATTERY)(NIPPO/ EVEREDAY) 96 NO

161 Electronics AAA CELL ( BATTERY) (NIPPO/ EVEREDAY) 109 NO

162 Electronics ANTI-STATIC WRIST WRAPS FOR HARDWARE ASSEMBLING LIKE CPU 10 NO

163 Electronics ANTIVIRUS LICENSE VERSION FOR LATEST COMPUTER SYSTEM WITH

2 YEARS VALIDITY 41 NO

164 Electronics BATTERY 9 VOLT FOR MULTIMETER 30 NO

165 Electronics BLUETOOTH DONGLE WITH LATEST CONFIGURATION AND MULTI

CARD ACCESSIBLE 2 NO

166 Electronics CARD READER ( MULTI PURPOSE USE) 1 NO

167 Electronics CAT 6 CABLE 60 MTR

168 Electronics CD CASE WALLET WITH MINIMUM 100 FOLDER 1 NO

169 Electronics CD-R WITH COVER 155 NO

170 Electronics CMOS BATTERY 5 NO

171 Electronics CO-AXIAL CABLE 12 MTR

172 Electronics COMPUTER KEYBOARD PS2 14 NO

173 Electronics COMPUTER KEYBOARD USB 14 NO

174 Electronics COMPUTER KEYBOARD WIRELESS 2 NO

175 Electronics COMPUTER OPTICAL MOUSE PS2 21 NO

176 Electronics COMPUTER OPTICAL MOUSE USB 45 NO

177 Electronics COMPUTER POWER CABLE 3 PIN 8 NO

178 Electronics COMPUTER SPEAKER SET 1 SET

179 Electronics COMUTER MOUSE WIRELESS 1 NO

180 Electronics CRIMPING TOOL 1 NO

181 Electronics DVD-R WITH COVER ( SONY) 210 NO

182 Electronics FIBRE OPTICAL CABLE 12 MTR

183 Electronics FIBRE OPTICAL CONNECTER 24 NO

184 Electronics HDD HARD DISK 1 TB SATA 1 NO

185 Electronics HDMI CABLE 8 MTR LONG 1 NO

186 Electronics LAN CABLE CAT-6 TYPE UTP CABLE 23 AWG-DIGILINK 300 MTR

187 Electronics LED SERIES DRIVER 12 V SMPS WITH REMOTE CONTROLLING

FACILITIES 4 NO

188 Electronics MONITER GUARD FOR COMPUTER 22" 13 NO

189 Electronics MULTI USE DATA CARD 1 NO

190 Electronics NETWORK CABLE TESTER 3 NO

191 Electronics OTG CABLE MICRO USB 2 NO

192 Electronics PCB BREAD BOUND FOR PRACTICAL 6X6 INCH 17 NO

193 Electronics PENCIL CELL BIG FOR MACHINE (EVEREADY/NIPPO) 6 NO

194 Electronics POCKET HARD DISK 2 TB WITH POUCH 1 NO

195 Electronics RAM ( DDR 2,3) 2 SET

196 Electronics RE-WRITABLE CD WITH COVER 35 NO

197 Electronics RE-WRITABLE DVD WITH COVER 35 NO

198 Electronics RF CABLE TWISTED PAIR ( WHITE,RED,YELLOW) 40 MTR SET 1 SET

199 Electronics RJ-45 CABLE EXTENDER FOR LAN CABLING 2 NO

200 Electronics RJ-45 CONNECTOR 154 NO

201 Electronics SMPS FOR COMPUTER 6 NO

202 Electronics UNSILDED TWISTED PAIR CABLE 12 MTR

203 Electronics UNSILDED TWISTED PAIR CABLE CONNECTOR 24 NO

204 Electronics USB ADAPTOR 2 NO

205 Electronics USB CABLE 1 NO

206 Electronics USB DATA CABLE MICRO USB 2 NO

207 Electronics VGA CABLE FOR COMPUTER 1 no.

208 Electronics WIFI RANGE EXTENDER 802.11 TECH, 300 MBPS, 500 MTR RANGE 2 NO

209 Plumber Bath tub small size 1 no.

210 Plumber Brush steel Wire 150X 50 mm 1 no.

211 Plumber Fire Bucket with stand 4 set

212 Plumber Mirror 100X150 mm 2 no.

213 Plumber oil pot with brush 1 no.

214 Plumber Urinal wall type complete with automatic sytem 1 set

215 Plumber Wah Bain (16”X14”X10”)Equivalent metric 2 no.

216 Plumber Water clo (European type p) complete with over headcitern 1 no.

217 Plumber Water clo (Indian type ) complete with over headcitern 1 no.

218 Plumber Water meter 1 no.

219 Mechanical Chiel Cold Flat 20 mmX300mm 11 no.

220 Mechanical Cutter machine 4 no.

221 Mechanical D. E. panner 7X8, 10X11, 13X1. 7, 19X2.2, 24X27 I:2028 2 SET

222 Mechanical Double face hammer 2 no.

223 Mechanical File Flat Rasp 250 mm 11 no.

224 Mechanical File Half Round, Rough 300 mm 11 no.

225 Mechanical File Triangular Rough 250 mm 11 no.

226 Mechanical File, square, rough 250 mm 11 no.

227 Mechanical Firmer Chiel 2 no.

228 Mechanical Level spirit wooden 300 mm 11 no.

229 Mechanical Micrometer Inside up to 25 mm Reading 0.01 mm 3 no.

230 Mechanical Plumb bob 50 gram 11 no.

231 Mechanical Plumber’s metal melting pot 10 kg 1 no.

232 Mechanical Pneumatic calibrator 26 no.

233 Mechanical Pointer extractors (puller) 1 no.

234 Mechanical Portable gas cutting machine capable of cutting straight and circular

with all accessories 1 set

235 Mechanical Pot- Hook 1 no.

236 Mechanical Pressure switches of various ranges 3 set

237 Mechanical Prick Punch 15 cm 2 no.

238 Mechanical Pully Puller 2 no.

239 Mechanical Punch Number 3 mm set 1 set

240 Mechanical Punch round 3 mm x 4 mm set of 2. 4 set

241 Mechanical Quenching Tank ( To be made in Institute) 2 no.

242 Mechanical Rachet pipe die 15 mm to 32 mm 1 no.

243 Mechanical Radius Gauge 1 to 7 mm & 7.5 to 15 mm 2 no.

244 Mechanical Radius turning attachment 1 set

245 Mechanical Reamer 6 mm to 25 mm by 1 mm 1 set

246 Mechanical Reamer adjustable 10 mm to 15 mm by 75 mm 1 set

247 Mechanical Reamer parallel 12 -16 mm set of 5. 2 set

248 Mechanical Reduction sleeve Morse 1-1, 3-1, 4-1, 4-2, 5-1, 5-2, 6-1, 1 set

249 Mechanical Ring guage 15 mm,20mm,25mm,32mm 1 set

250 Mechanical Saw Plumber 300mm 2 no.

251 Mechanical Scraper flat 15 cm 10 no.

252 Mechanical Scraper half round 15 cm 2 no.

253 Mechanical Scraper half round 25 cm 4 no.

254 Mechanical Scraper Triangular 25 cm 3 no.

255 Mechanical Screw Driver 15 cm. 101 no.

256 Mechanical Screw Driver 250 mm 11 no.

257 Mechanical Screw Driver 9 X 300 mm 4 no.

258 Mechanical Screw Driver Set (For sewing machine) 4 set

259 Mechanical Screw driver set (Philips set of 5 ) 75 set

260 Mechanical Screw Thread micrometer interchangeable 1 no.

261 Mechanical Screw thread micrometer with interchangeable 0 -25 mm pitch

anvils for checking metric threads 60 3 no.

262 Mechanical Scriber 15 cm 15 no.

263 Mechanical Scriber 200 mm 5 no.

264 Mechanical Scriber straight 150mm 2 no.

265 Mechanical Sesmic instruments 2 no.

266 Mechanical Set of stock and dies - metric 1 set

267 Mechanical shaper indexing center 1 no.

268 Mechanical Shaper tool holder turret type 2 no.

269 Mechanical Shear Tin Man’s 450 mm x 600mm 2 no.

270 Mechanical Shear Tin Man's 450mm*600mm 2 no.

271 Mechanical Shell End Mill Ø 50 x 36 x Ø 22 (preferably inserted tip type) 2 no.

272 Mechanical Shell End Mill Ø 75 mm x 50 x Ø 22 (preferably inserted tip type) 1 no.

273 Mechanical Side and face cutter dia 160 x 10 1 no.

274 Mechanical Side and face cutter dia 200 x 20 3 no.

275 Mechanical Simple tank type quantity meter 1 no.

276 Mechanical Sine Bar 200 mm 1 no.

277 Mechanical Slip Gauge as Johnson metric set. 2 set

278 Mechanical Slip Gauges (workshop grade) 2 set

279 Mechanical Snips Bent 25 cm. 5 no.

280 Mechanical Spanner D.E. 6-26 mm set of 10 pcs. (Gedor/Tapariya) 1 set

281 Mechanical Spanner monkey up to 50mm (Gedor/Tapariya) 2 no.

282 Mechanical Spanner set of 6 18X19,20X22,21X2324X27,25X27,30X32

4 set

Double ended

(Gedor/Tapariya)

283 Mechanical Spindle blade screw driver 100 mm 4 no.

284 Mechanical Spirit Level 0.05mm 200 mm 2 no.

285 Mechanical Stake grooving. 4 no.

286 Mechanical Stake hatchet. 4 no.

287 Mechanical Steel Rule 150 mm with matric and English 8 no.

288 Mechanical Steel rule 30 cm graduated both in English & Metric units 4 no.

289 Mechanical Stillon pattern pipe wrenche 300mm to take pipe 20 mm to 32mm 2 no.

290 Mechanical Stilson wrenches 25 cm. 5 no.

291 Mechanical Stone carborandum 15 cm X 5 cm X 5 cm X 4 mm 1 no.

292 Mechanical Stove melting solder 1 no.

293 Mechanical Straight edge gauge 2 ft. 4 no.

294 Mechanical Straight edge gauge 4 ft. 1 no.

295 Mechanical Straight edge steel 1 meter 1 no.

296 Mechanical Straight edge steel 500 mm 1 no.

297 Mechanical Stroboscope 1 no.

298 Mechanical Stud remover with socket handle 2 no.

299 Mechanical Surface gauge with dial test indicator plunger type i.e. 0.01 mm 7 no.

300 Mechanical Surface plate 400 X400 mm Grade I 1 no.

301 Mechanical Surface roughness comparison plates N1 - N12 grade set 3 set

302 Mechanical Swage Block 1 no.

303 Mechanical Table chuck 75 mm jaw swivel base 1 no.

304 Mechanical Tap & Die metric set up to 25 mm 2 set

305 Mechanical Tap and Die to cut B..F. , B..W. and metric thread of ize .6 to M-12 1 set

306 Mechanical Taper gauge M.T. No. 1, 2, 3, 4 & 5 1 set

307 Mechanical Telescope gauge 4 no.

308 Mechanical Telescopic gauge 13 mm to 300 mm 1 set

309 Mechanical Tenon saw 2 no.

310 Mechanical Thread Ring Gauge M-20 & M-21 1 set

311 Mechanical Tongs flat 300 mm 2 no.

312 Mechanical Tongs flat 350 mm. 1 no.

313 Mechanical Torque wrench ( 14 to 68 Nm.) 3 no.

314 Mechanical Trowel C-125-I : 6013 11 no.

315 Mechanical Twist Drill 12 to 25 mm (taper shank) (set) 1 set

316 Mechanical Twist Drill straight shank 1 to 12 mm by 1 mm 1 set

317 Mechanical Universal table angle plate 1 no.

318 Mechanical Universal vice 150 mm 1 no.

319 Mechanical V Block with clamp 80/7-63A I 2949 2 no.

320 Mechanical Vacuum Gauge 100 mm dial bourdon tube type 1 no.

321 Mechanical Vernier Bevel Protractor 300 mm blade 2 no.

322 Mechanical Vernier caliper 0-300 mm with least count 0.02 mm 1 no.

323 Mechanical Vernier caliper 0 -150 mm. L.C. 0.02 mm. 3 no.

324 Mechanical Vernier Micrometer 25 - 50 mm outside reading 0.001mm 3 no.

325 Mechanical Vice leg 10 cm jaw. 2 no.

326 Mechanical Watch maker screw driver (set of six) 12 set

327 Mechanical Wheel Dresser Diamond ( inserted-0.75 or 1 Carat ) 1 no.

328 Mechanical Wire type strain gauge (load cell/cantilever beem)instrument 4 no.


Q. Tender No 06 (RAW MATERIALS) / 2015-16 .Group 6-A (Auto)

Tender fee Rs. 500/- . (Five hundred only)

E.M.D. Amount Rs.3000/-.(Three Thousand only)

R. Items Serial No. 01 to 59

S. Name and Address of Party :

T. Bid Meeting: date :14/21/2015Time : 11:00 AM .

U. Last date and time of online submission date: 29/12/2015Time:16:00 PM

V. Last date and time of physical submission (Tender fee, EMD & Other supportingdocuments)

date :30-12-2015Time: 15:00 hrs.

W. Documment opening Date :30-12-2015Time: 16:00 hrs.

X. Online Tender Opening date : 31-12-2015 Time : 11:00 AM .




PHONE : (02742)252250

Principal


Palanpur

V. Name and Address of Party :

W. Sales Tax / VAT Regi. No.

X. 1. Tender Fee Amount :


3. E.M.D.Amount


PLACE :




A. Tender No 06 (RAW MATERIALS) / 2015-16 .Group 6-B (GENERAL)

Tender fee Rs.500/- . (Five hunderedonly)

E.M.D. Amount Rs.10000/-.(Ten Thousand only)





F. Last date and time of physical submission (Tender fee, EMD & Other supporting documents)

i. date :30-12-2015Time: 15:00 hrs.






PHONE : (02742)252250

Principal


Palanpur





3. E.M.D.Amount


PLACE :

DATE




A. Tender No06 (RAW MATERIALS) /2015-16 Group 6-C (MECHANICAL)

Tender fee Rs. 1000/- . (one thousand only)

E.M.D. Amount Rs.20000/-.(Twenty Thousand only)





F. Last date and time of physical submission (Tender fee, EMD & Other supporting

documents)

date :30-12-2015Time: 15:00 hrs.






PHONE : (02742)252250

Principal


Palanpur





3. E.M.D.Amount


PLACE :

DATE Sign. And Stamp Of Party Website for online tender submittion :https://www.nprocure.com











hrs. at














IX) Tender fee and EMD should be in form of Demand Draft payable to “Principal, Industrial Training Institute, Palanpur.

X) DD for Tender Fee and EMD must be issued by nationalized bank OR authorized private bank (IDBI, UTI, HDFC and ICICI). DD from other than said banks will not be

considered and party issuing such DD will not be considered for further tender process without issuing any notice.

XI) Tender fee will not be refundable.

XII) EMD should be separate for every group. In EMD cover tenderer must mentioned EMD for the ____ (name) group.


Conditions regarding exemptions from paying the Tender Fee and Earnest Money

Deposit (E.M.D.)

Those who are exempted for payment of Tender fee / EMD and tender fee must enclose necessary documents like SSI Registration (Gujarat State) along with NSIC/DGS&D/CSPO Registration

(a) Those Small, Cottage and tiny industrial units of the state having registration

numbers from Central Stores Purchase Organization National Small Industries Corporation / Director General of Supplies disposals.

(b) Institutions recognized by KhadiGramodyog Board having registration Certificate fromKhadiGramodyog Board, Khadi and village Commission (K.V.I.C.) or cottage

Industry. (c) Corporation doing productive activities like Gujarat Leather Industries Corporation

Ltd. Gujarat State Handicraft Development Corporation Ltd., Gujarat State Handicraft Development Corporation Ltd., Gujarat State Forest Development

Corporation Ltd. And such other corporation approved by the Industries and Mines Department for this purpose.

(d) Those Corporations not producing but providing market assistance to the Small, cottage& village Industries of the State and recognized by the government such

or G.S.I.C., GRIMCO etc.

(e) Industries, which have been set up through finance from State Government. Central Government under different schemes and having registration certificate for production of goods from concerned Districts Industries Centres.


4) Technical Bid

XI) Any party willing to participate in the tendering process must have atleast 50%

turnover of estimated total tender value group wise is in any of the last two Financial years.

XII) Tender Fee, EMD & other documents like last three years return, CA certi., GST certi,





XIII) Rate, offered will be considered as inclusive of all Taxes.

XIV) Tenderers are requested to note that their offer (price) must be valid for



INSTITUTE,



XV) The rate mentioned in Tender should be of unit as demanded in tender. The quantity



5) SAMPLE



V) Delivery period for supplying the stores should be one month from the order date. VI) All the quantity of ordered of Tender item should be delivered at once to the institute




V) Inspections and checking of ordered stores will be done by our authorized persons at our



at our institute.

VI) The quality of all the stores must be standard made and ISI marked. (wherever applicable)











Name :

Place:

Date: Designation :

Stamp of the firm

TENDER No-6


Total Items

Tender Fee

EMD

Tender -6 A Auto Sr. No. 01 to 59

59 500 3000

Tender -6 B General Sr. No. 60 to 154

95 500 10000

Tender -6 C Mechanical Sr. No. 155 to 333

179 1000 20000


RAW-MATERIAL ITEM LIST

SR. NO GROUP ITEM NAME QTY. UNIT

1 AUTO. 12v LED LCD Digital Clock Car Thermometer Hygrometer

Voltage Weather Forecast FOR TAVERA.

2 NO

2 AUTO. AIR CLEANER ( FILTER) FOR MARUTI 800 1 NO

3 AUTO. AIR COMPRESSOR NOZZLE FOR VEHICLE AIR FILLING 1 NO

4 AUTO. ALTERNATOR BEARING SET INNER AND OUTER( FOR

HYUNDAI) 1 SET

5 AUTO. AMBI PURE FRESENER FOR AIR CONDITIONER OF TAVERA 12 NO

6 AUTO. AUTO WIRE HEAVY DUTY 1 COIL

7 AUTO. BATTERY 12 VOLT 100AH 1 NO

8 AUTO. BATTERY 12 VOLT FOR HERO PLEASURE 1 NO

9 AUTO. BATTERY 12 VOLT FOR HERO SPLENDOR 1 NO

10 AUTO. BATTERY SOLUTION 5 LTR

11 AUTO. BRAKE LIGHT DOUBLE FILAMENT BULB 2 NO

12 AUTO. Car Auto Steel Towing Cable Rope 2000kgs 6mm Heavy Duty

4Mtr-Chevrolet Tavera 2 NO

13 AUTO. CAR DASH BOARD WAX POLISH 500 ML BOTTLE 13 NO

14 AUTO. CAR MOBILE HOLDER MOUNT BRACKET HOLDER STAND 360

DEGREE ROTATING 1 NO

15 AUTO. CAR SHAMPOO 500 ML BOTTLE 5 NO

16 AUTO. CAR WASHER GUN ( BARSS) 2 NO

17 AUTO. CAR WASHER PIPE HEAVY BLACK WIRE COATED 30 MTR

18 AUTO. CAR WASHER SPRAY WITH MINI COMPRESSOR WITH 10 MTR

LONG PIPE 2 NO

19 AUTO. CHESIS GREESE 1 KG

20 AUTO. CYLINDER HEAD GASKET FOR MARUTI 800 1 NO

21 AUTO. DIESEL FILTER FOR SINGLE CYLINDER STATIONARY ENGINE 1 NO

http://www.ebay.in/itm/12v-LED-LCD-Digital-Clock-Car-Thermometer-Hygrometer-Voltage-Weather-Forecast-/252154637729?hash=item3ab5966da1:g:bnYAAOSw%7EbFWOFhC

http://www.ebay.in/itm/12v-LED-LCD-Digital-Clock-Car-Thermometer-Hygrometer-Voltage-Weather-Forecast-/252154637729?hash=item3ab5966da1:g:bnYAAOSw%7EbFWOFhC

22 AUTO. DIESEL FUEL PIPE LINE FLEXIABLE 3 MTR

23 AUTO. DUAL CHARGER DIGITAL ( 2A DML-009 ) FOR VEHICLE 2 NO

24 AUTO. ENGINE CLEANING SOLUTION FOR DIESEL ENGINE 2 NO

25 AUTO. ENGINE CLEANING SOLUTION FOR PETROL ENGINE 2 NO

26 AUTO. ENGINE PACKING KIT FOR AMBESEDAR HINDUSTAN PETROL

ENGINE 1 SET

27 AUTO. ENGINE PACKING SET FOR MARUTI 800 1 SET

28 AUTO. ENGINE PACKING TUBE ( ANABOUND TUBE) 150 GRAM 2 NO

29 AUTO. FLAT FILTER ELEMENT FOR OIL FILTER OF AMBESADAR

HINDUSTAN PETROL ENGINE 1 NO

30 AUTO. FOG LIGHT ( ROUND) FOR MARUTI 35500M79F10 2 NO

31 AUTO. FUEL FILTER FOR FIAT SINA 1242 MPFI ENGINE 1 SET

32 AUTO. HEAD GASKET SINGLE CYLINDER FOR STATIONARY ENGINE 1 SET

33 AUTO. HEAD LIGHT ASSEMBLY FRONT LEFT SIDE & RIGHT SIDE ( FOR

HYUNDAI) 1 SET

34 AUTO. HEAD LIGHT CUT OUT CB 1156 MICO 4 NO

35 AUTO. HORN FOR INDIGO VEHICLE 2 NO

36 AUTO. JOPASU CAR DUSTER BIG & LONG 6 NO

37 AUTO. OIL FILTER FOR SINGLE CYLINDER STATIONARY ENGINE 1 NO

38 AUTO. OIL FILTER MARUTI 800 2 NO

39 AUTO. OIL FILTER PETROL FILTER FILTER FOR HINDUSTAN PETROL

ENGINE 1 NO

40 AUTO. OVER FLOW PIPE FOR RADIATOR OF AMBESADAR HINDUSTAN

PETROL ENGINE 5 MTR

41 AUTO. PAPER PACKING KIT FOR WATER PUMP OF AMBESADAR


42 AUTO. PETROL FILTER FOR PETROL OIL FILTER MPFI ENGINE 1 NO

43 AUTO. PETROL FUEL PIPE LINE FLEXIBLE 8 MM 5 MTR

44 AUTO. Philips Rally 130/100W H4 Headlight Blub (Set Of 2Pcs) FOR

TAVERA. 12 NO

45 AUTO. RADIATOR CAP FOR MARUTI 800 1 NO

46 AUTO. REVERSE LIGHT BULB 2 NO

47 AUTO. RUBBER MAT 5 PIECE SET ( FOR TAVERA COLD MODEL) 1 SET

48 AUTO. RUBBERMAT FOR TATA INDIGO (05 PIS SET) 1 SET

49 AUTO. SILICON OIL 10 LTR

50 AUTO. Speedwav Car Roof LED SMD Light WHITE-Chevrolet Tavera 3 SET

51 AUTO. Speedwav Stick On Car Door Ghost / Projector / Shadow LED

Light - Chevrolet Tavera 2 SET

52 AUTO. System Auto Car Air Compressor Super Model 2 no

53 AUTO. Takecare Car Dual Tone Horn For Chevrolet Tavera 3 SET

54 AUTO. THERMOSTAT HOUSING PACKING OF AMBESADAR


55 AUTO. VEHICLE BODY POLISH 500 ML 2 NO

56 AUTO. WATER SEAL FOR WATER PUMP OF AMBESADAR HINDUSTAN

PETROL ENGINE 5 NO

57 AUTO. WHEEL BALANCING MACHINE WEIGHT 5gmTO 200gm 1 SET

58 AUTO. WIPER BLADE SET ( FOR HYUNDAI CAR) 1 SET

59 AUTO. WIPER MOTOR FOR REAR SIDE GLASS ( FOR HYUNDAI) 1 NO

60 General 30X5 mm Nut and Bolt 50 set

61 GENERAL ACETIC ACID ( LAB GRADE) 2 LTR

62 GENERAL ACETONE ( LAB GRADE) 1 LTR

63 General Backelite Sheet 800X600X12 mm 2 no.

64 GENERAL BANDAID ( HANSA PLAST) MINIMUM 100 NO. PKT 1 PKT

65 General Base paint ( ASIAN PAINT APPO LIGHT GLOSS PREMIUM

ENAMEL) 4 LTR TIN AIVERY 8 Litre

66 GENERAL BOBBIN CASE FOR FULL SHUTTLE SEWING MACHINE (

HAYA/JAPAN MAKE ) 25 NO

67 GENERAL BOBBIN FOR FULL SHUTTLE SEWING MACHINE 25 NO

68 GENERAL CaCo3 POWDER ( LAB GRADE) 3 KG

69 GENERAL CALIBRATION STICKET ( BIG SIZE) 100 NO

70 General Carbon Tetra cloride 1.5 Litre

71 GENERAL CD MARKER PEN 31 NO

72 GENERAL CELLO TAPE BROWN 2" 12 NO

73 GENERAL COCONUT OIL 0.1 KG

74 GENERAL COTTON FABRIC ( 100 PERCENT COTTON) 42 INCH PANNO

BROWN COLOUR AS PER OUR SAMPLE 25 MTR


MAROON COLOUR AS PER OUR SAMPLE 25 MTR


RED COLOUR AS PER OUR SAMPLE 25 MTR

77 GENERAL COTTON FABRIC ( 100 PERCENT COTTON) 42 INCH PANNO SKY

BLUE COLOUR AS PER OUR SAMPLE 25 MTR

78 GENERAL COTTON PRINTED FABRIC ( 100 PERCENT COTTON) MINIMUM

4 DIFFERENT DESIGN AS PER OUR SAMPLE 100 MTR

79 GENERAL COTTON WASTE( cotton 2' x 2' cut pis) 412 KG

80 General CTC Spray 4 no.

81 GENERAL DETTOL FOR MEDICINE ( 100 ML BOTTLE) 1 BOTTLE

82 GENERAL DOOR MATE GREEN 4'X2 ' 10 NO

83 GENERAL DUSTBIN FOOT OPERATED MEDIUM SIZE 2 NO

84 GENERAL DUSTER FOR WHITE BOARD 15 NO

85 GENERAL FEVICOL 200 gm EASY FLOW TYPE 50 NO

86 GENERAL FIRST AID BOX WITH ALL MEDICINE 2 BOX

87 General Formica sheet 800X600X12 mm 2 no.

88 GENERAL GALLON ( CARBO) 10 LTR. WHITE COLOUR 5 NO

89 GENERAL GHODA FILE 20 NO

90 GENERAL GLASS CLEANER ( WITH FLAVAOR) 500 ML BOTTLE ( COLIN) 45 NO

91 GENERAL GLASS WOOL 5 KG

92 GENERAL GUM BOTTLE 750 ML 1 NO

93 GENERAL HAND WASH BOTTLE 500ML (Enliven Calming Cedarwood&

Patchouli Luxury Handwash (500ml)) 36 NO

94 General HIGHLIGHTER PEN PKT ( MINIMUM 5 PIECE PKT) 1 pkt

95 GENERAL INVISIBLE ZIP FOR LADIES GARMENT 12 INCH LONG 50 NO

96 GENERAL JACQUARD FABRIC 52 INH PANNO AS PER OUR SAMPLE 100 MTR

97 GENERAL LAMINATION PAPER PACKET A4 SIZE 1 PKT

98 GENERAL LEFT HANDED FABRIC CUTTING SCISSOR ( MORCHAPP) 2 NO

99 GENERAL LEGS FOR REVOLVING CHAIR 1 NO

100 GENERAL LOCK BIG SIZE 7 LEVER 30 NO

101 GENERAL MADARPATH COTTON FABRIC ( 62 INCH PANNO) 100 MTR

102 GENERAL METHANOL ( LAB GRADE) 2 LTR

103 GENERAL METHYL ISO-BUTANE KETONE ( LAQB GRADE) 1 LTR

104 GENERAL MINI CHARGING HAND TORCH (EVERYDAY) 5 NO

105 GENERAL M-SEAL 200 GRAM PKT 2 PKT

106 GENERAL NAOH ( LAB GRADE) 0.5 N 0.5 LTR

107 General OIL PAINT COLOUR Black (Nerolac, Asian Paints) 1 LTR TIN 5 Litre

108 GENERAL OIL PAINT COLOUR WHITE (Nerolac, Asian Paints)( 1 LTR TIN) 4 LTR

109 General oil paint Grey colour (Nerolac, Asian Paints) L LTR TIN 2 Litre

110 GENERAL OIL PAINT MARKER PEN 2 NO

111 GENERAL OIL PAINT YELLOW COLOUR (Nerolac, Asian Paints) 1 LTR TIN 10 LTR

112 GENERAL ORGAN NEEDLE NO- 11 FOR FULL SHUTTLE SEWING

MACHINE 6 PKT

113 GENERAL ORGAN NEEDLE NO- 16 FOR FULL SHUTTLE SEWING

MACHINE 10 PKT

114 General Paint brush 25 mm 2 no.

115 General Paint brush 50 mm 6 no.

116 GENERAL PAPER PUNCH BIG SIZE 1 NO

117 GENERAL PENCIL HB 260 NO

118 GENERAL PERMANENT MARKER PEN 19 NO

119 GENERAL PLASTIC BOX 1X1 FEET 10 NO

120 GENERAL PLASTIC GLASS FOR WATER ( HEAVY) 6 PIECE SET 3 SET

121 General Plywood sheet 800X600X12 mm 2 no.

122 GENERAL puf CHEMICAL SET 0.5 KG

123 General REGISTER 200 PAGE 15 no.

124 GENERAL ROOM FRESHNER AMBIPURE (LAVANDER FLAVOR) 275 gm 38 NO

125 GENERAL SALT ( LAB GRADE) 0.5 KG

126 GENERAL SCISSOR MEDIUM SIZE 4 NO

127 General Screw 18X6, 25X6, 50X6 (each 5 pkt) 5 set

128 General SET SQUARE 30-60°, 45-45° BIG SIZE 1 no.

129 GENERAL SHAMPOO POUCH 25 NO

130 General Silica Gel 0.5 KG

131 General SIMPLE ISOMETRIC BLOCK ( PRYSUM,

PIRAMID,CYLINDER,CONE) 2 set

132 GENERAL SKETCH PEN KNIFE ANGLE SET(14 colour) 10 SET

133 GENERAL SKETCH PEN SET ( 21 COLOUR SET) 12 SET

134 GENERAL SLIDING CUTTER 1" WIDE 5 NO

135 GENERAL SOAP (SURF EXCEL DETERGENT CAKE, 150 GM ) 2105 NO

136 General SPUNCH 1'X1' 1 no.

137 GENERAL Staedtler Luna ABS Color Pencil ( 48 COLOUR PKT) 1 PKT

138 General STEEL GLASS SET MEDIUM SIZE 1 set

139 GENERAL STEPPLER BIG SIZE (HP-45) 6 NO

140 GENERAL STEPPLER PIN BIG SIZE 5 PKT

141 GENERAL STEPPLER PIN SMALL SIZE 10 PKT

142 GENERAL STEPPLER SMALL 8 NO

143 GENERAL TABLE GLASS 4'X2.5'X6 MM THICK 3 NO

144 GENERAL TAG FOR WHITE BOARD 90 CM X 60 CM 2 NO

145 General TERPENTILE 1 Litre

146 GENERAL THINNER ( 1 LTR TIN) 8 LTR

147 GENERAL WATER JUG 10 LTR (Milton KoolMusafir Water Carrier - 10

Litre) 10 NO

148 GENERAL WHITE BOARD MARKER PEN SET (RED,BLUE,BLACK,GREEN

COLOUR SET) 176 SET

149 GENERAL WHITE REEL 800 MTR LONG ( VARDHMAN/ CHALLENGE

BRAND) 100 REEL

150 GENERAL WHITENER TUBE PEN 10 NO

151 General Wire nail (ખીલીઓ, 2 to 18 guage) 3.5 Kg

152 General Wooden colour oil paint (ASIAN PAINT,NEROLAC) 10 Litre

153 General Wooden Gatti 2 Dozen

154 GENERAL WOODEN PATIYA FOR WORK BENCH 6.5 'X1' X 2" THICK 15 NO

155 MECHANICAL 1" TANK CONNECTION PVC ASTRAL 6 NO

156 MECHANICAL 1" BRASS HANDLE VALVE HEAVY 6 NO

157 MECHANICAL 1" BRASS T 6 NO

158 MECHANICAL 1" COUPLING PVC ASTRAL 20 NO

159 MECHANICAL 1" ELBOW BRASS HEAVY 6 NO

160 MECHANICAL 1" ELBOW PVC ASTRAL 12 NO

161 MECHANICAL 1" FT PVC ASTRAL 12 NO

162 MECHANICAL 1" G.I BUCH (PLUG) 10 NO

163 MECHANICAL 1" MT PVC ASTRAL 12 NO

164 MECHANICAL 1" Ø ASTRAL PVC BUSH (PLUG) 25 NO

165 MECHANICAL 1" Ø ASTRAL PVC PIPE 25 FEET LONG 26 NO

166 MECHANICAL 1" Ø ASTRAL PVC UNION 6 NO

167 MECHANICAL 1" Ø GI PIPE ( B CLASS) Ø 1" 10 FOOT

168 MECHANICAL 1" PVC ASTRAL BALL COCK FOR TANK 6 NO

169 MECHANICAL 1" T PVC ASTRAL 6 NO

170 MECHANICAL 1" VALVE PVC ASTRAL 6 NO

171 MECHANICAL 1"X 1/2" GI ELBOW 12 NO

172 MECHANICAL 1.25" WASTE COUPLING FOR WASH BASIN 6 NO

173 MECHANICAL 1.25" WASTE PIPE 1 MTR LONG 12 NO

174 MECHANICAL 1/2 " COUPLING PVC ASTRAL 20 NO

175 MECHANICAL 1/2" Ø ASTRAL PVC PIPE 20 FEET LONG 25 NO

176 MECHANICAL 1/2" BALL VALVE BRASS HEAVY 2 NO

177 MECHANICAL 1/2" BRASS HANDLE VALVE HEAVY 6 NO

178 MECHANICAL 1/2" BRASS T 6 NO

179 MECHANICAL 1/2" CONNECTION PIPE FOR PILLAR COCK TO WATER TAPE 2

FEET LONG 12 NO

180 MECHANICAL 1/2" ELBOW BRASS HEAVY 6 NO

181 MECHANICAL 1/2" ELBOW PVC ASTRAL 12 NO

182 MECHANICAL 1/2" FT PVC ASTRAL 12 NO

183 MECHANICAL 1/2" G.I BUCH (PLUG) 30 NO

184 MECHANICAL 1/2" GI BEND 8 NO

185 MECHANICAL 1/2" GI COUPLING 18 NO

186 MECHANICAL 1/2" GI ELBOW 18 NO

187 MECHANICAL 1/2" GI T 17 NO

188 MECHANICAL 1/2" GI UNION 6 NO

189 MECHANICAL 1/2" MT PVC ASTRAL 12 NO

190 MECHANICAL 1/2" Ø GI PIPE ( B CLASS) Ø 1/2" 50 FOOT

191 MECHANICAL 1/2" Ø ASTRAL PVC BUSH 25 NO

192 MECHANICAL 1/2" Ø ASTRAL PVC UNION 6 NO

193 MECHANICAL 1/2" PILLAR COCK BRASS 6 NO

194 MECHANICAL 1/2" PVC ASTRAL BALL COCK FOR TANK 6 NO

195 MECHANICAL 1/2" PVC ASTRAL FOR TANK CONNECTION 6 NO

196 MECHANICAL 1/2" RED IRON TAPE 50 NO

197 MECHANICAL 1/2" T PVC ASTRAL 16 NO

198 MECHANICAL 1/2" VALVE PVC ASTRAL 6 NO

199 MECHANICAL 1/2"X4"GI NIPPLE 20 NO

200 MECHANICAL 1X1/2 " T PVC ASTRAL 6 NO

201 MECHANICAL 1X1/2" REDUCER PVC ASTRAL 12 NO

202 MECHANICAL 3 WAY VALVE WITH COMPOUND 2 NO

203 MECHANICAL AIR COMPRESSOR PIPE HEAVY 25 MTR

204 MECHANICAL ALLEN BOLT M4X0.7 MM PITCH 15 NO

205 MECHANICAL ALLEN BOLT M8X1.25 MM PITCH 15 NO

206 MECHANICAL ALLUMINIUM FILLER WIRE 5 % SILICON DIA. 1/8 INCH 1 KG

207 MECHANICAL ALLUMUNIUM SHEET 4 FOOT X 2 FOOT X 2 MM THICKNESS 1 NO

208 MECHANICAL BALL BEARING 2" DIA. 1 NO

209 MECHANICAL BATHROOM SHAVOR OF S.S MATERIAL HEAVY ( SQUARE

TYPE) 2 NO

210 Mechanical BATTERY 62 AMP LEAD-ACID 1 no.

211 MECHANICAL BELLOW TYPE PRESSURE GAUGE (0-5 kg/cm2) 1 no

212 MECHANICAL BELT A-38 FOR HEXO MACHINE 4 NO

213 MECHANICAL BENCH VICE HANDLE DIA. 6 MM 6 NO

214 MECHANICAL BOLT 6 MM X 3 INCH LENGTH FULL THREDED WITH WASHER

NUT-BOLT 100 NO

215 MECHANICAL BOLT FOR BENCH VICE 6 MM X 10 MM WITH WASHER BOLT-

NUT FULL THREDED 72 NO

216 MECHANICAL BOLT FOR VICE 50 NO

217 MECHANICAL BRASS SHEET 5 ' X 2 ' X 2 MM THICKNESS 1 NO

218 Mechanical BUTANE GAS WITH NOZZLE 225 GRAM 2 no.

219 MECHANICAL CAPSULE TYPE PRESSURE GAUGE ( 0-5 kg/cm2) 1 NO

220 MECHANICAL CARBIDE DRILL BIT Ø 10 MM AND Ø 12 MM 1 SET

221 MECHANICAL CI ROUND Ø140 X 30 MM 30 NO

222 MECHANICAL CI BLOCK 50X50X50 MM 69 NO



225 MECHANICAL CI FLAT 150X150X10 MM 20 NO

226 MECHANICAL CI FLAT 35X35X150 MM 18 NO

227 MECHANICAL CI FLAT 50X6 MM 8 MTR

228 MECHANICAL CI ROUND Ø20 X80 MM 15 NO

229 MECHANICAL CI ROUND Ø 100X20 MM 18 NO



232 MECHANICAL CI ROUND Ø100X25 MM 24 NO

233 MECHANICAL CLEANING BRUSH SMALL 75 MM 2 NO

234 MECHANICAL CLEUPON METER 1 NO

235 MECHANICAL COPPER LUG 400 AMP. 12 NO

236 MECHANICAL COPPER TUBE Ø 1/4" 7 MTR

237 MECHANICAL Cuph ROD Ø 3 MM 0.2 KG

238 MECHANICAL DIAPHRAM CONTROL VALVE 2 INCH DIA. 1 NO

239 Mechanical DRIER H7 & H5 PENCIL TYPE 1/4"X1/4" 1 set

240 MECHANICAL EMERY PAPER SMOOTH (WATER BASE CLOTH) 100 NO

241 MECHANICAL END MILL CUTTER INSERT ( FOR VMC 430) 10 NO

242 MECHANICAL FACE MILL INSERT 16 MM SIZE (FOR VMC-430) 10 NO

243 MECHANICAL FEED PUMP FOR HINDUSTAN TRACTOR G312 31 HP MODEL 1 NO

244 Mechanical FLAT NUT Ø 1/4" 10 no.

245 Mechanical FLUX FOR BRAZING 0.1 kg

246 MECHANICAL FUEL PIPE FLEXIBLE WITH BENZO BOLT AND WASHER 2 FOOT

LONG 1 NO

247 MECHANICAL GAS FILLED THERMOMETER (0-100 DEGREE CELCIUS) 1 NO

248 MECHANICAL GASKET SHEET 4'X4' 2 NO

249 MECHANICAL GRINDER WHEEL 300 MM X40 MM ( THICKNESS ) X HOLE 50

MM ( 1 ROUGH & 1 SMOOTH) 1 SET

250 MECHANICAL HAIR BRUSH 100 MM 3 NO

251 MECHANICAL HAIR BRUSH 150 MM 13 NO

252 MECHANICAL HANDLE ( PLASTIC ) FOR HAND FILE 10 NO

253 MECHANICAL HEAD BOLT AND NUT FOR HINDUSTAN PETROL ENGINE 12 NO

254 MECHANICAL HP GASKET SHEET 1/64" THICK 2X1 FEET 1 NO

255 MECHANICAL HSS CENTRAL DRILL 3 NO

256 MECHANICAL HSS DRILL BIT 3 MM TO 8 MM BY 1 MM 1 SET

257 MECHANICAL HSS DRILL BIT 4 MM 3 NO

258 MECHANICAL HSS DRILL BIT Ø 10 MM 2 NO

259 MECHANICAL HSS HAND HEXO BALDE 18 T.P.I (BI-MATEL 08% COBALT

MAGICUTT WHITE COLOUR) 795 NO

260 MECHANICAL HSS MACHINE HACKSAW BLADE ALL HARD (10 T.P.I)

450X25X1.25 MM) 5 NO

261 MECHANICAL HSS PARALLEL SHANK TWIST DRILL Ø 10 MM 3 NO

262 MECHANICAL HSS PARALLEL SHANK TWIST DRILL Ø 12 MM 3 NO

263 MECHANICAL HSS PARALLEL SHANK TWIST DRILL Ø 8.5 MM 3 NO

264 MECHANICAL HSS TOOL BIT12X12X150 MM 2 NO

265 MECHANICAL HSS TOOL BIT15X15X150 MM 2 NO

266 MECHANICAL INSERT FOR GROOVING TOOL TEGU TCH 3MM R2020 1 NO

267 MECHANICAL INSERT FOR THREADING TOOL SER 2020K 1 NO

268 MECHANICAL INSERT FOR TURNING TOOL POLNR 2020K12 1 NO

269 MECHANICAL LAPPING PASTE SMOOTH 0.2 KG

270 MECHANICAL LEAD ACID BATTERY 12 V 13 PLATES 2 NO

271 MECHANICAL LITHIUM BASE PREMIUM GREESE 0.5 KG

272 MECHANICAL LOW ALLOY HAND HEXO BALDE 18 T.P.I 200 NO

273 MECHANICAL LUG FOR BATTERY CABLE TERMINAL 4 NO

274 MECHANICAL MASTER PRESSURE GAUGE ( 0-10 kg/cm2) 1 NO

275 MECHANICAL MERCURY IN GLASS FILLED THERMOMETER ( 0-100 °C ) 1 NO

276 Mechanical Metal conduit pipe 19 mm dia 10 no.

277 Mechanical Metal Junction box 4 way 30 no.

278 MECHANICAL METAL SCREW 1.5 INCH LENGTH 8 DOZEN

279 Mechanical Metal screw 20/5 2 pkt

280 MECHANICAL MS ANGLE 35X35X5 MM (01 MTR=2.6 KG) ( TATA,JINDAL) 37 KG

281 MECHANICAL MS ANGLE 65X65X6 MM (01 MTR= 07 KG) ( TATA,JINDAL) 140 KG

282 MECHANICAL MS FLAT 100X6 MM(01 MTR=2.355 KG) ( TATA,JINDAL) 30 KG

283 MECHANICAL MS FLAT 50X6 MM (01 MTR=2.355 KG) ( TATA,JINDAL) 170 KG



286 MECHANICAL MS ROUND BAR Ø 10 MM (01 MTR=0.82 KG ) ( TATA,JINDAL) 13 KG

287 MECHANICAL MS ROUND BAR Ø 12 MM ( 01 MTR=0.89 KG) ( TATA,JINDAL) 5 KG

288 MECHANICAL MS ROUND BAR Ø 25 MM (01 MTR= 3.85 KG) ( TATA,JINDAL) 80 KG

289 MECHANICAL MS ROUND BAR Ø 30 MM ( 01 MTR=5.55 KG) ( TATA,JINDAL) 36 KG

290 MECHANICAL NON RETURN VALVE 1" 4 NO

291 MECHANICAL NUT AND BOLT 3/8 INCH X5 INCH 0.5 KG

292 MECHANICAL NUT BOLT WITH WASHER 10 MM 25 NO



295 Mechanical OIL PAINT RED OXIDE COLOUR (Nerolac, Asian Paints) ( 1 LTR

TIN) 1 no.

296 Mechanical OVER LOAD PROTECTOR ( FOR REFRIGERATION) 2 no.

297 Mechanical P clip with nail 200 no.

298 MECHANICAL PLOY PROPLYENE BLOCK 100X100X100 MM 10 NO

299 MECHANICAL PLOY PROPLYENE BLOCK 75X75X75 MM 20 NO

300 MECHANICAL POLY PROPLYENE FLAT 100X20 MM 10 MTR

301 MECHANICAL POLY PROPLYENE FLAT 75X20 MM 10 MTR

302 MECHANICAL POLY PROPLYENE ROUND BAR Ø45 MM 6 MTR

303 MECHANICAL POLY PROPLYENE ROUND BAR Ø50 MM 6 MTR

304 MECHANICAL PVC CAP 1/2 INCH 10 NO

305 MECHANICAL PVC ELECTROFLUX BLOWER 1 NO

306 MECHANICAL PVC SOLUTION 100 GRAM BOTTLE 10 NO

307 Mechanical R-22 REFRIGERANT 500 GRAM BOTTLE 6 no.

308 MECHANICAL RCC DRILL BIT 3 MM TO 8 MM BY 1 MM 1 SET

309 Mechanical RCC drill bit 3mm, 4mm,5mm and 6 mm 6 set

310 Mechanical RCC drill bit 6 mm 5 no.

311 Mechanical REFRIGERATION OIL 2 Litre

312 Mechanical REFRIGERATOR THERMOSTAT 2 no.

313 MECHANICAL RESISTANCE THERMOMETER 0-100 DEGREE CELCIUS 1 NO

314 MECHANICAL RHC BLEND 450 GRAM 2 NO

315 MECHANICAL RTD THERMOMETER PT 100 ( -50 TO 100° K) 1 NO

316 MECHANICAL RUBBER CHARGING LINE 3 MTR LONG 2 NO

317 MECHANICAL RUBBER TUBE PRESSURE REGULATORY VALVE 2" DIA. 1 NO

318 MECHANICAL S.S SHEET 4 FOOT X 2 FOOT X 2 MM THICKNESS 1 NO

319 MECHANICAL SILICON BRONZE FILLER WIRE DIA. 1/8 INCH 3 KG

320 MECHANICAL Skywalk Car Carpet Cleaning Dusting Brush 24 NO

321 MECHANICAL STAINLESS STEEL GATE VALVE Ø 1/2" HEAVY 4 NO

322 MECHANICAL STAINLESS STEEL GLOBE VALVE Ø 1" HEAVY 4 NO

323 MECHANICAL TEFLON TAPE 55 NO

324 Mechanical THERMAL FUSE 2 no.

325 MECHANICAL THERMO COUPLE LAB GRADE ( 0-100 DEGREE CELCIUS) 1 NO

326 MECHANICAL TUNGSTAN FILLER WIRE DIA. 1/8 INCH 1 KG

327 MECHANICAL U- TUBE MANOMETER ( LAB GRADE) ( 0-25 MM) 1 NO

328 MECHANICAL V BELT A-40 1 NO

329 MECHANICAL V DILL IBNSERT ( FOR VMC 430) 10 NO

330 MECHANICAL VACCUM GAUGE ( 0-76 mmhg) 1 NO

331 MECHANICAL VICE HANDLE 12" 10 NO

332 Mechanical WATER COOLER THERMOSTAT 2 no.

333 MECHANICAL WHIRLPOOL Thk 1340 OLP RELAY 1 SET

· PDF fileSONARIYA BUNGLAW, BANAS DAIRY ROAD, PALANPUR-385001. DIST: BANASKANTHA. PHONE :...

Documents

Transcript of · PDF fileSONARIYA BUNGLAW, BANAS DAIRY ROAD, PALANPUR-385001. DIST: BANASKANTHA. PHONE :...