AT-1500 TEST REPORT - Home - PCNA · CONCLUSION TEST(S) CONDUCTED PASS CPSIA Section 101, Total...
Transcript of AT-1500 TEST REPORT - Home - PCNA · CONCLUSION TEST(S) CONDUCTED PASS CPSIA Section 101, Total...
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
TEST REPORT Test Report # 17H‐003020(R1) Date of Report Issue: October 26, 2017
Date of Sample Received: April 25, 2017 Pages: Page 1 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
AT-1500
Ver.10CS-HK-RE005-POLY
CLIENT INFORMATION: †
Company: Polyconcept Hong Kong Ltd
Recipient: Patrick Lam
Recipient Email: [email protected]
SAMPLE INFORMATION:
Description: Cheer 11‐oz. Ceramic Mug, Rio 12‐oz. Ceramic Mug, Dolce 10‐oz. Ceramic Mug with Spoon, Bounty 11‐oz. Ceramic Mug, Zander 13‐oz. Ceramic Mug, Zapata 15‐oz. Ceramic Mug, Maya 11‐oz. Ceramic Mug, Dakota 10‐oz. Ceramic Mug, Aura 14‐oz. Ceramic Mug, Bounty 11‐oz. Ceramic Mug ‐ Spirit, Constellation 12‐oz. Mug ‐ Spirit, Zapata 15‐oz. Mug ‐ Electric, Mambo 17‐oz. Ceramic Mug
Assortment: ‐ Purchase Order Number: ‐
Article No.: Refer to Page 2 to 3 Toy Co./Agency: ‐
Vendor Name: 11236 Country of Origin: China
Country of Distribution: ‐ Labeled Age Grade: ‐
†Quantity Submitted: Refer to Page 2 to 3 Requested Age Grade: ‐
†Testing Period: 04/27/2017 – 05/24/2017 06/30/2017 – 07/14/2017 09/06/2017 – 09/15/2017 10/11/2017 – 10/13/2017
Tested Age Grade: ‐
OVERALL RESULT: PASS
Refer to page 4 for test result summary and appropriate notes.
ANSECO GROUP (HK) LIMITED
Loska Yeung LokKa
Assistant Manager, Chemical Laboratory
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 2 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
†ARTICLE NO./ QUANTITY SUBMITTED DETAILED:
Style description Article No. Qty.
Aura 14‐oz. Ceramic Mug
SM‐6317WGR 24 pcs
SM‐6317WBK 48 pcs
SM‐6317WOR 24 pcs
SM‐6317WBL 48 pcs
Bounty 11‐oz. Ceramic Mug SM‐6301BK 24 pcs
SM‐6301WH 24 pcs
Bounty 11‐oz. Ceramic Mug ‐ Spirit SM‐6321BK 24 pcs
SM‐6321OR 24 pcs
Cheer 11‐oz. Ceramic Mug
SM‐6319RD 19 pcs
SM‐6319NY 19 pcs
SM‐6319OR 19 pcs
SM‐6319BK 19 pcs
Constellation 12‐oz. Mug ‐ Spirit
SM‐6323RBL 11 pcs
SM‐6323RE 21 pcs
SM‐6323BK 35 pcs
Dakota 10‐oz. Ceramic Mug SM‐6314BKRE 24 pcs
SM‐6314BKOR 24 pcs
Dolce 10‐oz. Ceramic Mug with Spoon SM‐6300WOR 24 pcs
SM‐6300WBL 24 pcs
Mambo 17‐oz. Ceramic Mug SM‐6354BK 24 pcs
Maya 11‐oz. Ceramic Mug SM‐6311BKWH 24 pcs
SM‐6311BKBL 24 pcs
Rio 12‐oz. Ceramic Mug
SM‐6325BL 19 pcs
SM‐6325LM 19 pcs
SM‐6325OR 19 pcs
Zander 13‐oz. Ceramic Mug
SM‐6304NBL 24 pcs
SM6304BK 24 pcs
SM‐6304RE 24 pcs
SM‐6304WH 24 pcs
Zapata 15‐oz. Ceramic Mug
SM‐6306WH 24 pcs
SM‐6306RE 24 pcs
SM‐6306BK 24 pcs
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 3 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
†ARTICLE NO./ QUANTITY SUBMITTED DETAILED:
Style description Article No. Qty.
Zapata 15‐oz. Mug ‐ Electric
SM‐6336BKRE 24 pcs
SM‐6336BKLG 24 pcs
SM‐6336BKPU 24 pcs
SM‐6336BKYE 24 pcs
SM‐6336BKWH 24 pcs
Parts ‐ 1 lot
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 4 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
TEST RESULTS SUMMARY:
At the request of the client, the following tests were conducted:
CONCLUSION TEST(S) CONDUCTED
PASS CPSIA Section 101, Total Lead in Substrate Materials
PASS CPSIA Section 101, Total Lead in Glass and Ceramic Materials#
PASS Client’s Requirement, Bisphenol A#
PASS FDA 21 CFR 177.2600, Rubber
PASS †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from
Tableware (Shipment over 2,000 Pieces) – Interior
PASS †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics –
Interior
PASS †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from
Tableware – Lip and Rim
PASS †California Proposition 65 Case No. CGC‐04‐436429, Lead and Cadmium from Beverage
Products – External Decoration#
PASS Canadian Consumer Products Containing Lead (Contact with Mouth) Regulation SOR/2010‐273 as Amended by SOR/2016‐171, Total Lead in Accessible Substrates#
PASS †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead
and Cadmium from Ceramics and Glassware – Interior
PASS †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead
and Cadmium from Ceramics and Glassware – Lip and Rim
Remark: †Revised information and supersedes the previous Report no. 17H‐003020.
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 5 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS:
CPSIA Section 101, Total Lead in Substrate Materials Test Method: CPSC‐CH‐E1001‐08.3 (Metal), CPSC‐CH‐E1002‐08.3 (Non‐Metal) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 1 ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ 100
Conclusion PASS ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 6 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS:
CPSIA Section 101, Total Lead in Glass and Ceramic Materials Test Method: AI|ANSECO Method# Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 2 3 4 5 6 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 7 8 9 10 11 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND 33 ND 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 12 13 14 15 16 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND 25 100
Conclusion PASS PASS PASS PASS PASS
Specimen No. 17 18 19 20 94 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) 27 49 ND 35 ND 100
Conclusion PASS PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 7 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: Client’s Requirement, Bisphenol A Test Method: AI|ANSECO Method#
Analytical Method: Liquid Chromatography with Fluorescence Detection
Specimen No. 1 ‐‐‐ ‐‐‐ ‐‐‐
Test Item CAS No. Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Bisphenol A (BPA) 80‐05‐7 ND ‐‐‐ ‐‐‐ ‐‐‐ ND
Conclusion PASS ‐‐‐ ‐‐‐ ‐‐‐
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not Detected (Reporting Limit = 1 ppm)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 8 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: FDA 21 CFR 177.2600, Rubber Test Method: FDA 21 CFR 177.2600
Specimen No. 1
Test Item Test Condition
Result RL Limit Temp. Duration
Distilled water extractive (mg/in2) Reflux First
7 hours ND 2 20
Distilled water extractive (mg/in2) Reflux Succeeding 2 hours
ND 0.1 1
Conclusion PASS
Note: Temp. = Temperature mg/in2= Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.2600 (e). From Client’s information, rubber article was intended for repeated use in contact with aqueous food only, therefore n‐hexane extractive was not conducted.
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 9 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 21A 21B 21C 21D 21E 21F 21G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
290 290 290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 21H 21I 21J 21K 21L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 10 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 11 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 22A 22B 22C 22D 22E 22F 22G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
290 290 290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 22H 22I 22J 22K 22L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 12 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 13 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 23A 23B 23C 23D 23E 23F 23G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
290 290 290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 23H 23I 23J 23K 23L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 14 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 15 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 24A 24B 24C 24D 24E 24F 24G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
290 290 290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 24H 24I 24J 24K 24L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 16 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 17 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 25A 25B 25C 25D 25E 25F 25G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
370 370 370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 25H 25I 25J 25K 25L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 18 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 19 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 26A 26B 26C 26D 26E 26F 26G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
370 370 370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 26H 26I 26J 26K 26L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 20 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 21 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 27A 27B 27C 27D 27E 27F 27G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
370 370 370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 27H 27I 27J 27K 27L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 22 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 23 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 28A 28B 28C 28D 28E 28F 28G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
290 290 290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 28H 28I 28J 28K 28L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 24 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 25 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 29A 29B 29C 29D 29E 29F 29G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
40 40 40 40 40 40 40
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 29H 29I 29J 29K 29L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
40 40 40 40 40
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.189
Leachable Lead (Pb) ND ND ND ND ND ND 0.226
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 26 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
Cups and Mugs (Average of 12) 0.049 0.100
X Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 27 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 30A 30B 30C 30D 30E 30F 30G
Test Item Reult (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
290 290 290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 30H 30I 30J 30K 30L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 28 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 29 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 31A 31B 31C 31D 31E 31F 31G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
40 40 40 40 40 40 40
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 31H 31I 31J 31K 31L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
40 40 40 40 40
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.189
Leachable Lead (Pb) ND ND ND ND ND ND 0.226
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 30 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
Cups and Mugs (Average of 12) 0.049 0.100
X Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 31 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 32A 32B 32C 32D 32E 32F 32G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
310 310 310 310 310 310 310
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 32H 32I 32J 32K 32L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
310 310 310 310 310
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 32 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 33 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 33A 33B 33C 33D 33E 33F 33G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
350 350 350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 33H 33I 33J 33K 33L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 34 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 35 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 34A 34B 34C 34D 34E 34F 34G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
350 350 350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 34H 34I 34J 34K 34L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 36 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 37 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 35A 35B 35C 35D 35E 35F 35G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
350 350 350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 35H 35I 35J 35K 35L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 38 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 39 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 36A 36B 36C 36D 36E 36F 36G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
400 400 400 400 400 400 400
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 36H 36I 36J 36K 36L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
400 400 400 400 400
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 40 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 41 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 37A 37B 37C 37D 37E 37F 37G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
400 400 400 400 400 400 400
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 37H 37I 37J 37K 37L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
400 400 400 400 400
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 42 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 43 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 38A 38B 38C 38D 38E 38F 38G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
400 400 400 400 400 400 400
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 38H 38I 38J 38K 38L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
400 400 400 400 400
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 44 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 45 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 39A 39B 39C 39D 39E 39F 39G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
330 330 330 330 330 330 330
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 39H 39I 39J 39K 39L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
330 330 330 330 330
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 46 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 47 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 40A 40B 40C 40D 40E 40F 40G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 40H 40I 40J 40K 40L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 48 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 49 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 41A 41B 41C 41D 41E 41F 41G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 41H 41I 41J 41K 41L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 50 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 51 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 42A 42B 42C 42D 42E 42F 42G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
380 380 380 380 380 380 380
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 42H 42I 42J 42K 42L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
380 380 380 380 380
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 52 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 53 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 43A 43B 43C 43D 43E 43F 43G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
380 380 380 380 380 380 380
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 43H 43I 43J 43K 43L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
380 380 380 380 380
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 54 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 55 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 44A 44B 44C 44D 44E 44F 44G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
380 380 380 380 380 380 380
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 44H 44I 44J 44K 44L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
380 380 380 380 380
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 56 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 57 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 45A 45B 45C 45D 45E 45F 45G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
330 330 330 330 330 330 330
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 45H 45I 45J 45K 45L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
330 330 330 330 330
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 58 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 59 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 46A 45B 46C 46D 46E 46F 46G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
350 350 350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 46H 46I 46J 46K 46L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 60 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 61 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 47A 47B 47C 47D 47E 47F 47G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
390 390 390 390 390 390 390
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 47H 47I 47J 47K 47L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
390 390 390 390 390
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 62 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 63 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 48A 48B 48C 48D 48E 48F 48G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
390 390 390 390 390 390 390
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 48H 48I 48J 48K 48L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
390 390 390 390 390
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 64 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 65 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 49A 49B 49C 49D 49E 49F 49G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
390 390 390 390 390 390 390
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 49H 49I 49J 49K 49L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
390 390 390 390 390
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 66 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 67 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 50A 50B 50C 50D 50E 50F 50G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
390 390 390 390 390 390 390
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 50H 50I 50J 50K 50L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
390 390 390 390 390
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 68 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 69 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 51A 51B 51C 51D 51E 51F 51G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
470 470 470 470 470 470 470
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 51H 51I 51J 51K 51L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
470 470 470 470 470
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 70 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 71 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 90A 90B 90C 90D 90E 90F 90G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
370 370 370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 90H 90I 90J 90K 90L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 72 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 73 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 92A 92B 92C 92D 92E 92F 92G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
370 370 370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 92H 92I 92J 92K 92L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 74 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 75 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 95A 95B 95C 95D 95E 95F 95G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
310 310 310 310 310 310 310
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 95H 95I 95J 95K 95L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
310 310 310 310 310
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 76 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 77 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 97A 97B 97C 97D 97E 97F 97G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
350 350 350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 97H 97I 97J 97K 97L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 78 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 79 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. 938430, Leachable Lead and Cadmium from Tableware (Shipment
over 2,000 Pieces) – Interior Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 98A 98B 98C 98D 98E 98F 98G
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Volume of acid used (mL)
370 370 370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND
Leachable Lead (Pb) ND ND ND ND ND ND ND
Conclusion
Specimen No. 98H 98I 98J 98K 98L
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.049
Leachable Lead (Pb) ND ND ND ND ND ND 0.100
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 80 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Average of 12) 0.049 0.100
Flatware (Average of 12) 0.189 0.226
Large Hollowware (Average of 12) 0.049 0.100
Small Hollowware (Average of 12) 0.049 0.100
Pitchers (Average of 12) 0.049 0.100
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 81 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 21A 21B 21C 21D 21E 21F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
290 290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 82 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 22A 22B 22C 22D 22E 22F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
290 290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 83 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 23A 23B 23C 23D 23E 23F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
290 290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 84 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 24A 24B 24C 24D 24E 24F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
290 290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 85 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 25A 25B 25C 25D 25E 25F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
370 370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 86 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 26A 26B 26C 26D 26E 26F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
370 370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 87 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 27A 27B 27C 27D 27E 27F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
370 370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 88 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 28A 28B 28C 28D 28E 28F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
290 290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 89 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 29A 29B 29C 29D 29E 29F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
40 40 40 40 40 40
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND 0.5
Leachable Lead (Pb) ND ND ND ND ND ND ND 3.0
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
Cups and Mugs (Any of 6) 0.5 0.5
X Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 90 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 30A 30B 30C 30D 30E 30F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
290 290 290 290 290 290
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 91 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 31A 31B 31C 31D 31E 31F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
40 40 40 40 40 40
Leachable Cadmium (Cd)
ND ND ND ND ND ND ND 0.5
Leachable Lead (Pb) ND ND ND ND ND ND ND 3.0
Conclusion PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
Cups and Mugs (Any of 6) 0.5 0.5
X Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 92 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 32A 32B 32C 32D 32E 32F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
310 310 310 310 310 310
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 93 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 33A 33B 33C 33D 33E 33F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
350 350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 94 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 34A 34B 34C 34D 34E 34F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
350 350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 95 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 35A 35B 35C 35D 35E 35F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
350 350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 96 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 36A 36B 36C 36D 36E 36F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
400 400 400 400 400 400
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 97 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 37A 37B 37C 37D 37E 37F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
400 400 400 400 400 400
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 98 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 38A 38B 38C 38D 38E 38F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
400 400 400 400 400 400
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 99 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 39A 39B 39C 39D 39E 39F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
330 330 330 330 330 330
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 100 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 40A 40B 40C 40D 40E 40F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 101 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 41A 41B 41C 41D 41E 41F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 102 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 42A 42B 42C 42D 42E 42F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
380 380 380 380 380 380
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 103 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 43A 43B 43C 43D 43E 43F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
380 380 380 380 380 380
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 104 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 44A 44B 44C 44D 44E 44F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
380 380 380 380 380 380
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 105 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 45A 45B 45C 45D 45E 45F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
330 330 330 330 330 330
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 106 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 46A 45B 46C 46D 46E 46F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
350 350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 107 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 47A 47B 47C 47D 47E 47F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
390 390 390 390 390 390
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 108 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 48A 48B 48C 48D 48E 48F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
390 390 390 390 390 390
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 109 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 49A 49B 49C 49D 49E 49F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
390 390 390 390 390 390
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 110 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 50A 50B 50C 50D 50E 50F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
390 390 390 390 390 390
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 111 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 51A 51B 51C 51D 51E 51F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
470 470 470 470 470 470
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 112 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 90A 90B 90C 90D 90E 90F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
370 370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 113 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 92A 92B 92C 92D 92E 92F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
370 370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 114 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 95A 95B 95C 95D 95E 95F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
310 310 310 310 310 310
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 115 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 97A 97B 97C 97D 97E 97F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
350 350 350 350 350 350
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 116 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †FDA CPG 545.400 & CPG 545.450, Leachable Cadmium and Lead from Ceramics – Interior
Test Method: ASTM C738‐94(Reapproved 2011) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 98A 98B 98C 98D 98E 98F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Average (mg/L)
Limit (mg/L)
Volume of acid used (mL)
370 370 370 370 370 370
Leachable Cadmium (Cd)
ND ND ND ND ND ND NA 0.5
Leachable Lead (Pb) ND ND ND ND ND ND NA 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) NA = Not applicable LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.5 0.5
Flatware (Average of 6) 0.5 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.5 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 117 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 52A 52B 52C 52D 52E 52F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 53A 53B 53C 53D 53E 53F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 118 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 54A 54B 54C 54D 54E 54F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 55A 55B 55C 55D 55E 55F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 119 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 56A 56B 56C 56D 56E 56F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
200 200 200 200 200 200
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 57A 57B 57C 57D 57E 57F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
200 200 200 200 200 200
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 120 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 58A 58B 58C 58D 58E 58F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
200 200 200 200 200 200
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 59A 59B 59C 59D 59E 59F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
190 190 190 190 190 190
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 121 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 60A 60B 60C 60D 60E 60F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
190 190 190 190 190 190
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 61A 61B 61C 61D 61E 61F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
190 190 190 190 190 190
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 122 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 62A 62B 62C 62D 62E 62F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 63A 63B 63C 63D 63E 63F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 123 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 64A 64B 64C 64D 64E 64F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 65A 65B 65C 65D 65E 65F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 124 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 66A 66B 66C 66D 66E 66F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 67A 67B 67C 67D 67E 67F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 125 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 68A 68B 68C 68D 68E 68F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 69A 69B 69C 69D 69E 69F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
190 190 190 190 190 190
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 126 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 70A 70B 70C 70D 70E 70F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
190 190 190 190 190 190
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 71A 71B 71C 71D 71E 71F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
180 180 180 180 180 180
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 127 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 72A 72B 72C 72D 72E 72F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
180 180 180 180 180 180
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 73A 73B 73C 73D 73E 73F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
180 180 180 180 180 180
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 128 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 74A 74B 74C 74D 74E 74F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
180 180 180 180 180 180
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 75A 75B 75C 75D 75E 75F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
180 180 180 180 180 180
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 129 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 91A 91B 91C 91D 91E 91F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
190 190 190 190 190 190
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 93A 93B 93C 93D 93E 93F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
190 190 190 190 190 190
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 130 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 96A 96B 96C 96D 96E 96F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 99A 99B 99C 99D 99E 99F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
180 180 180 180 180 180
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 131 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436729, Leachable Lead and Cadmium from Tableware – Lip
and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 101A 101B 101C 101D 101E 101F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 2.0
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 132 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436429, Lead and Cadmium from Beverage Products –
External Decoration Test Method: NIOSH Method 9100# Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 76 77 78 79 80
Test Item Result
(µg/article) Result
(µg/article) Result
(µg/article) Result
(µg/article) Result
(µg/article) Limit
(µg/article)
Cadmium (Cd) ND ND ND ND ND 1.0
Lead (Pb) ND ND ND ND ND 1.0
Conclusion PASS PASS PASS PASS PASS
Specimen No. 81 82 83 84 85
Test Item Result
(µg/article) Result
(µg/article) Result
(µg/article) Result
(µg/article) Result
(µg/article) Limit
(µg/article)
Cadmium (Cd) ND ND ND ND ND 1.0
Lead (Pb) ND ND ND ND ND 1.0
Conclusion PASS PASS PASS PASS PASS
Note: µg/article = Micrograms per article LT = Less than ND = Not detected (Reporting Limit = 0.4 µg/article)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 133 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †California Proposition 65 Case No. CGC‐04‐436429, Lead and Cadmium from Beverage Products –
External Decoration Test Method: NIOSH Method 9100# Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 86 87 88 89 100
Test Item Result
(µg/article) Result
(µg/article) Result
(µg/article) Result
(µg/article) Result
(µg/article) Limit
(µg/article)
Cadmium (Cd) ND ND ND ND ND 1.0
Lead (Pb) ND ND ND ND ND 1.0
Conclusion PASS PASS PASS PASS PASS
Specimen No. 102 ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐
Test Item Result
(µg/article) Result
(µg/article) Result
(µg/article) Result
(µg/article) Result
(µg/article) Limit
(µg/article)
Cadmium (Cd) ND ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ 1.0
Lead (Pb) ND ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ 1.0
Conclusion PASS ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐
Note: µg/article = Micrograms per article LT = Less than ND = Not detected (Reporting Limit = 0.4 µg/article)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 134 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: Canadian Consumer Products Containing Lead (Contact with Mouth) Regulation SOR/2010‐273 as Amended by SOR/2016‐171, Total Lead in Accessible Substrates Test Method: CPSC‐CH‐E1001‐08.3 (Metal), CPSC‐CH‐E1002‐08.3 (Non‐Metal)# Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 1 2 3 4 5 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 6 7 8 9 10 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND 33 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 11 12 13 14 15 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ND ND ND ND 90
Conclusion PASS PASS PASS PASS PASS
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 135 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: Canadian Consumer Products Containing Lead (Contact with Mouth) Regulation SOR/2010‐273 as Amended by SOR/2016‐171, Total Lead in Accessible Substrates Test Method: CPSC‐CH‐E1001‐08.3 (Metal), CPSC‐CH‐E1002‐08.3 (Non‐Metal)# Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 16 17 18 19 20 Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) 25 27 49 ND 35 90
Conclusion PASS PASS PASS PASS PASS
Specimen No. 94 ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ Total
Test Item Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Result (ppm)
Limit (ppm)
Total Lead (Pb) ND ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ 90
Conclusion PASS ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐
Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration.
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 136 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 21M 21N 21O 21P 21Q 21R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
295 295 295 295 295 295
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 137 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 22M 22N 22O 22P 22Q 22R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
295 295 295 295 295 295
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 138 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 23M 23N 23O 23P 23Q 23R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
295 295 295 295 295 295
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 139 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 24M 24N 24O 24P 24Q 24R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
295 295 295 295 295 295
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 140 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 25M 25N 25O 25P 25Q 25R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
375 375 375 375 375 375
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 141 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 26M 26N 26O 26P 26Q 26R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
375 375 375 375 375 375
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 142 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 27M 27N 27O 27P 27Q 27R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
375 375 375 375 375 375
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 143 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 28M 28N 28O 28P 28Q 28R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
295 295 295 295 295 295
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 144 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 29M 29N 29O 29P 29Q 29R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
40 40 40 40 40 40
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 3.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
Cups and Mugs (Any of 6) 0.50 0.5
X Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 145 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 30M 30N 30O 30P 30Q 30R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
295 295 295 295 295 295
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 146 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 31M 31N 31O 31P 31Q 31R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
40 40 40 40 40 40
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 3.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
Cups and Mugs (Any of 6) 0.50 0.5
X Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 147 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 32M 32N 32O 32P 32Q 32R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
315 315 315 315 315 315
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 148 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 33M 33N 33O 33P 33Q 33R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
355 355 355 355 355 355
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 149 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 34M 34N 34O 34P 34Q 34R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
355 355 355 355 355 355
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 150 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 35M 35N 35O 35P 35Q 35R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
355 355 355 355 355 355
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 151 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 36M 36N 36O 36P 36Q 36R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
405 405 405 405 405 405
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 152 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 37M 37N 37O 37P 37Q 37R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
405 405 405 405 405 405
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 153 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 38M 38N 38O 38P 38Q 38R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
405 405 405 405 405 405
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 154 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 39M 39N 39O 39P 39Q 39R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
335 335 335 335 335 335
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 155 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 40M 40N 40O 40P 40Q 40R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
215 215 215 215 215 215
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 156 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 41M 41N 41O 41P 41Q 41R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
215 215 215 215 215 215
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 157 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 42M 42N 42O 42P 42Q 42R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
385 385 385 385 385 385
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 158 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 43M 43N 43O 43P 43Q 43R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
385 385 385 385 385 385
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 159 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 44M 44N 44O 44P 44Q 44R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
385 385 385 385 385 385
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 160 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 45M 45N 45O 45P 45Q 45R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
335 335 335 335 335 335
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 161 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 46M 46N 46O 46P 46Q 46R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
355 355 355 355 355 355
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 162 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 47M 47N 47O 47P 47Q 47R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
395 395 395 395 395 395
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 163 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 48M 48N 48O 48P 48Q 48R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
395 395 395 395 395 395
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 164 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 49M 49N 49O 49P 49Q 49R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
395 395 395 395 395 395
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 165 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 50M 50N 50O 50P 50Q 50R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
395 395 395 395 395 395
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 166 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 51M 51N 51O 51P 51Q 51R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
475 475 475 475 475 475
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 167 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 90M 90N 90O 90P 90Q 90R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
375 ND ND ND ND ND
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 168 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 92M 92N 92O 92P 92Q 92R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
375 375 375 375 375 375
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 169 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 95M 95N 95O 95P 95Q 95R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
315 315 315 315 315 315
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 170 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 97M 97N 97O 97P 97Q 97R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
355 355 355 355 355 355
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 171 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Interior Test Method: ISO 6486‐1:1999 Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 98M 98N 98O 98P 98Q 98R
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
375 375 375 375 375 375
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.50
Leachable Lead (Pb) ND ND ND ND ND ND 0.5
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitres mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
Category
Leachable Cd (mg/L)
Leachable Pb (mg/L)
X Cups and Mugs (Any of 6) 0.50 0.5
Flatware (Any of 6) 0.50 3.0
Large Hollowware (Any of 6) 0.25 1.0
Small Hollowware (Any of 6) 0.50 2.0
Pitchers (Any of 6) 0.25 0.5
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 172 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 52A 52B 52C 52D 52E 52F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 53A 53B 53C 53D 53E 53F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 173 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 54A 54B 54C 54D 54E 54F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 55A 55B 55C 55D 55E 55F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 174 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 56A 56B 56C 56D 56E 56F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
200 200 200 200 200 200
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 57A 57B 57C 57D 57E 57F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
200 200 200 200 200 200
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 175 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 58A 58B 58C 58D 58E 58F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
200 200 200 200 200 200
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 59A 59B 59C 59D 59E 59F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
190 190 190 190 190 190
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 176 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 60A 60B 60C 60D 60E 60F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
190 190 190 190 190 190
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 61A 61B 61C 61D 61E 61F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
190 190 190 190 190 190
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 177 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 62A 62B 62C 62D 62E 62F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 63A 63B 63C 63D 63E 63F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 178 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 64A 64B 64C 64D 64E 64F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 65A 65B 65C 65D 65E 65F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 179 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 66A 66B 66C 66D 66E 66F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 67A 67B 67C 67D 67E 67F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 180 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 68A 68B 68C 68D 68E 68F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 69A 69B 69C 69D 69E 69F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
190 190 190 190 190 190
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 181 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 70A 70B 70C 70D 70E 70F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
190 190 190 190 190 190
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 71A 71B 71C 71D 71E 71F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
180 180 180 180 180 180
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 182 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 72A 72B 72C 72D 72E 72F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
180 180 180 180 180 180
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 73A 73B 73C 73D 73E 73F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
180 180 180 180 180 180
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 183 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 74A 74B 74C 74D 74E 74F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
180 180 180 180 180 180
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 75A 75B 75C 75D 75E 75F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
180 180 180 180 180 180
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 184 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 91A 91B 91C 91D 91E 91F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
190 190 190 190 190 190
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 93A 93B 93C 93D 93E 93F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
190 190 190 190 190 190
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 185 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 96A 96B 96C 96D 96E 96F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
160 160 160 160 160 160
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Specimen No. 99A 99B 99C 99D 99E 99F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
180 180 180 180 180 180
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 186 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
DETAILED RESULTS: †Canadian Glazed Ceramics and Glassware Regulations SOR/2016‐175, Leachable Lead and Cadmium
from Ceramics and Glassware – Lip and Rim Test Method: ASTM C927‐80(2014) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry
Specimen No. 101A 101B 101C 101D 101E 101F
Test Item Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Result (mg/L)
Limit (mg/L)
Volume of acid used (mL)
210 210 210 210 210 210
Leachable Cadmium (Cd)
ND ND ND ND ND ND 0.4
Leachable Lead (Pb) ND ND ND ND ND ND 4.0
Conclusion PASS PASS PASS PASS PASS PASS
Note: mL = Millilitre mg/L (Milligrams per litre) = ppm (Parts per million) LT = Less than ND = Not Detected (Reporting Limit: Pb = 0.04 mg/L; Cd = 0.02 mg/L)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 187 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
†SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
1 Black soft plastic Lid (Mambo 17‐oz. Ceramic Mug style)
2 White/ black printed dull white ceramic
Entire mug (Cheer 11‐oz. Ceramic Mug/ Bounty 11‐oz. Ceramic Mug/ Zander 13‐oz. Ceramic Mug/ Zapata 15‐oz. Ceramic Mug/ Zapata 15‐oz. Mug – Electric/ Mambo 17‐oz. Ceramic Mug/ Aura 14‐oz. Ceramic Mug styles)
3 White/ deep blue printed dull white ceramic Entire mug (Cheer 11‐oz. Ceramic Mug style)
4 White/ orange printed dull white ceramic
Entire mug (Cheer 11‐oz. Ceramic Mug/ Rio 12‐oz. Ceramic Mug/ Dolce 10‐oz. Ceramic Mug with Spoon/ Aura 14‐oz. Ceramic Mug styles)
5 White/ red printed dull white ceramic Entire mug (Cheer 11‐oz. Ceramic Mug/ Constellation 12‐oz. Mug – Spirit styles)
6 White/ blue printed dull white ceramic
Entire mug (Rio 12‐oz. Ceramic Mug/ Zander 13‐oz. Ceramic Mug/ Aura 14‐oz. Ceramic Mug/ Constellation 12‐oz. Mug – Spirit styles)
7 White/ light green printed dull white ceramic
Entire mug (Rio 12‐oz. Ceramic Mug style)
8 White/ light blue printed dull white ceramic Entire mug (Dolce 10‐oz. Ceramic Mug with Spoon style)
9 White/ pale blue printed dull white ceramic Spoon (Dolce 10‐oz. Ceramic Mug with Spoon style)
10 White/ light orange printed dull white ceramic
Spoon (Dolce 10‐oz. Ceramic Mug with Spoon style)
11 Deep red/ dull black printed dull white ceramic
Entire mug (Zander 13‐oz. Ceramic Mug/ Zapata 15‐oz. Ceramic Mug/ Dakota 10‐oz. Ceramic Mug styles)
12 Dull white/ dull black printed dull white ceramic
Entire mug (Maya 11‐oz. Ceramic Mug style)
13 Dark orange/ dull black printed dull white ceramic
Entire mug (Dakota 10‐oz. Ceramic Mug style)
14 White/ green printed dull white ceramic Entire mug (Aura 14‐oz. Ceramic Mug style)
15 Black/ matt white printed dull white ceramic Entire mug (Bounty 11‐oz. Ceramic Mug – Spirit style)
16 Deep orange/ white printed dull white ceramic
Entire mug (Bounty 11‐oz. Ceramic Mug – Spirit style)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 188 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
†SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
17 Light green/ black printed dull white ceramic
Entire mug (Zapata 15‐oz. Mug – Electric style)
18 Purple/ black printed dull white ceramic Entire mug (Zapata 15‐oz. Mug – Electric style)
19 Deep red/ black printed dull white ceramic Entire mug (Zapata 15‐oz. Mug – Electric style)
20 Yellow/ black printed dull white ceramic Entire mug (Zapata 15‐oz. Mug – Electric style)
21 Black printed dull white ceramic Interior of mug (Cheer 11‐oz. Ceramic Mug/ Bounty 11‐oz. Ceramic Mug styles)
22 Deep blue printed dull white ceramic Interior of mug (Cheer 11‐oz. Ceramic Mug style)
23 Orange printed dull white ceramic Interior of mug (Cheer 11‐oz. Ceramic Mug style)
24 Red printed dull white ceramic Interior of mug (Cheer 11‐oz. Ceramic Mug style)
25 Blue printed dull white ceramic Interior of mug (Rio 12‐oz. Ceramic Mug style)
26 Light green printed dull white ceramic Interior of mug (Rio 12‐oz. Ceramic Mug style)
27 Orange printed dull white ceramic Interior of mug (Rio 12‐oz. Ceramic Mug style)
28 Light blue printed dull white ceramic Interior of mug (Dolce 10‐oz. Ceramic Mug with Spoon style)
29 Pale blue printed dull white ceramic Interior of spoon (Dolce 10‐oz. Ceramic Mug with Spoon style)
30 Orange printed dull white ceramic Interior of mug (Dolce 10‐oz. Ceramic Mug with Spoon style)
31 Light orange printed dull white ceramic Interior of spoon (Dolce 10‐oz. Ceramic Mug with Spoon style)
32 White printed dull white ceramic Interior of mug (Bounty 11‐oz. Ceramic Mug/ Bounty 11‐oz. Ceramic Mug – Spirit styles)
33 Blue printed dull white ceramic Interior of mug (Zander 13‐oz. Ceramic Mug style)
34 Deep red printed dull white ceramic
Interior of mug (Zander 13‐oz. Ceramic Mug style)
35 White printed dull white ceramic Interior of mug (Zander 13‐oz. Ceramic Mug style)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 189 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
†SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
36 Black printed dull white ceramic Interior of mug (Zapata 15‐oz. Ceramic Mug style)
37 Deep red printed dull white ceramic
Interior of mug (Zapata 15‐oz. Ceramic Mug style)
38 White printed dull white ceramic Interior of mug (Zapata 15‐oz. Ceramic Mug/ Zapata 15‐oz. Mug – Electric styles)
39 Dull white printed dull white ceramic Interior of mug (Maya 11‐oz. Ceramic Mug style)
40 Dark orange printed dull white ceramic Interior of mug (Dakota 10‐oz. Ceramic Mug style)
41 Deep red printed dull white ceramic Interior of mug (Dakota 10‐oz. Ceramic Mug style)
42 Blue printed dull white ceramic Interior of mug (Aura 14‐oz. Ceramic Mug style)
43 Green printed dull white ceramic Interior of mug (Aura 14‐oz. Ceramic Mug style)
44 Orange printed dull white ceramic Interior of mug (Aura 14‐oz. Ceramic Mug style)
45 Matt white printed dull white ceramic Interior of mug (Bounty 11‐oz. Ceramic Mug – Spirit style)
46 White printed dull white ceramic Interior of mug (Constellation 12‐oz. Mug – Spirit styles)
47 Light green printed dull white ceramic Interior of mug (Zapata 15‐oz. Mug – Electric style)
48 Purple printed dull white ceramic Interior of mug (Zapata 15‐oz. Mug – Electric style)
49 Deep red printed dull white ceramic Interior of mug (Zapata 15‐oz. Mug – Electric style)
50 Yellow printed dull white ceramic Interior of mug (Zapata 15‐oz. Mug – Electric style)
51 White printed dull white ceramic Interior of mug (Mambo 17‐oz. Ceramic Mug style)
52 White/ black printed dull white ceramic Lip and rim of mug (Cheer 11‐oz. Ceramic Mug style)
53 White/ deep blue printed dull white ceramic Lip and rim of mug (Cheer 11‐oz. Ceramic Mug style)
54 White/ orange printed dull white ceramic Lip and rim of mug (Cheer 11‐oz. Ceramic Mug style)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 190 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
†SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
55 White/ red printed dull white ceramic Lip and rim of mug (Cheer 11‐oz. Ceramic Mug style)
56 White/ blue printed dull white ceramic Lip and rim of mug (Rio 12‐oz. Ceramic Mug style)
57 White/ light green printed dull white ceramic
Lip and rim of mug (Rio 12‐oz. Ceramic Mug style)
58 White/ orange printed dull white ceramic Lip and rim of mug (Rio 12‐oz. Ceramic Mug style)
59 White/ light blue printed dull white ceramic Lip and rim of mug (Dolce 10‐oz. Ceramic Mug with Spoon style)
60 White/ orange printed dull white ceramic Lip and rim of mug (Dolce 10‐oz. Ceramic Mug with Spoon style)
61 Dull white/ dull black printed dull white ceramic
Lip and rim of mug (Maya 11‐oz. Ceramic Mug style)
62 Dark orange/ dull black printed dull white ceramic
Lip and rim of mug (Dakota 10‐oz. Ceramic Mug style)
63 Deep red/ dull black printed dull white ceramic
Lip and rim of mug (Dakota 10‐oz. Ceramic Mug style)
64 White/ blue printed dull white ceramic Lip and rim of mug (Aura 14‐oz. Ceramic Mug style)
65 White/ green printed dull white ceramic Lip and rim of mug (Aura 14‐oz. Ceramic Mug style)
66 White/ orange printed dull white ceramic Lip and rim of mug (Aura 14‐oz. Ceramic Mug style)
67 Black/ matt white printed dull white ceramic Lip and rim of mug (Bounty 11‐oz. Ceramic Mug – Spirit styles)
68 Deep orange/ white printed dull white ceramic
Lip and rim of mug (Bounty 11‐oz. Ceramic Mug – Spirit styles)
69 White/ blue printed dull white ceramic Lip and rim of mug (Constellation 12‐oz. Mug – Spirit style)
70 White/ red printed dull white ceramic Lip and rim of mug (Constellation 12‐oz. Mug – Spirit style)
71 Light green/ black printed dull white ceramic
Lip and rim of mug (Zapata 15‐oz. Mug – Electric style)
72 Purple/ black printed dull white ceramic Lip and rim of mug (Zapata 15‐oz. Mug – Electric style)
73 Deep red/ black printed dull white ceramic Lip and rim of mug (Zapata 15‐oz. Mug – Electric style)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 191 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
†SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
74 White/ black printed dull white ceramic Lip and rim of mug (Zapata 15‐oz. Mug – Electric style)
75 Yellow/ black printed dull white ceramic Lip and rim of mug (Zapata 15‐oz. Mug – Electric style)
76 White printed dull white ceramic
External decoration of mug (Cheer 11‐oz. Ceramic Mug/ Rio 12‐oz. Ceramic Mug/ Dolce 10‐oz. Ceramic Mug with Spoon/ Bounty 11‐oz. Ceramic Mug/ Zander 13‐oz. Ceramic Mug/ Zapata 15‐oz. Ceramic Mug/ Aura 14‐oz. Ceramic Mug/ Zapata 15‐oz. Mug ‐ Electric styles)
77 Black printed dull white ceramic
External decoration of mug (Bounty 11‐oz. Ceramic Mug/ Zapata 15‐oz. Ceramic Mug/ Bounty 11‐oz. Ceramic Mug – Spirit/ Zapata 15‐oz. Mug – Electric/ Zander 13‐oz. Ceramic Mug styles)
78 Pale blue printed dull white ceramic External decoration of spoon (Dolce 10‐oz. Ceramic Mug with Spoon style)
79 Light orange printed dull white ceramic External decoration of spoon (Dolce 10‐oz. Ceramic Mug with Spoon style)
80 Blue printed dull white ceramic External decoration of mug (Zander 13‐oz. Ceramic Mug style)
81 Deep red printed dull white ceramic External decoration of mug (Zander 13‐oz. Ceramic Mug/ Zapata 15‐oz. Ceramic Mug styles)
82 Dull black printed dull white ceramic External decoration of mug (Maya 11‐oz. Ceramic Mug/ Dakota 10‐oz. Ceramic Mug styles)
83 White/ blue printed dull white ceramic External decoration of mug (Aura 14‐oz. Ceramic Mug style)
84 White/ green printed dull white ceramic External decoration of mug (Aura 14‐oz. Ceramic Mug style)
85 White/ orange printed dull white ceramic External decoration of mug (Aura 14‐oz. Ceramic Mug style)
86 Deep orange printed dull white ceramic External decoration of mug (Bounty 11‐oz. Ceramic Mug – Spirit style)
87 White/ blue printed dull white ceramic External decoration of mug (Constellation 12‐oz. Mug – Spirit style)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 192 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
†SPECIMEN DESCRIPTION:
Specimen No. Specimen Description Location
88 White/ red printed dull white ceramic External decoration of mug (Constellation 12‐oz. Mug – Spirit style)
89 Black printed dull white ceramic Interior of mug (Aura 14‐oz. Ceramic Mug style)
90 Black printed dull white ceramic Interior of mug (Aura 14‐oz. Ceramic Mug style)
91 White/ black printed dull white ceramic Lip and rim of mug (Aura 14‐oz. Ceramic Mug style)
92 Blue printed dull white ceramic Interior of mug (Aura 14‐oz. Ceramic Mug style)
93 White/ blue printed dull white ceramic Lip and rim of mug (Aura 14‐oz. Ceramic Mug style)
94 Black/ blue printed dull white ceramic Entire mug (Maya 11‐oz. Ceramic Mug style)
95 Blue printed dull white ceramic Interior of mug (Maya 11‐oz. Ceramic Mug style)
96 Black/ blue printed dull white ceramic Lip and rim of mug (Maya 11‐oz. Ceramic Mug style)
97 Black printed dull white ceramic Interior of mug (Zander 13‐oz. Ceramic Mug style)
98 Black printed dull white ceramic Interior of mug (Aura 14‐oz. Ceramic Mug style)
99 Black/ white printed dull white ceramic Lip and rim of mug (Aura 14‐oz. Ceramic Mug style)
100 Black/ white printed dull white ceramic External decoration of mug (Aura 14‐oz. Ceramic Mug style)
101 Black/ white printed dull white ceramic Lip and rim of mug (Constellation 12‐oz. Mug – Spirit)
102 Black/ white printed dull white ceramic External decoration of mug (Constellation 12‐oz. Mug ‐ Spirit)
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 193 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
†SAMPLE PHOTO:
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 194 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
†SAMPLE PHOTO:
The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.
The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.
ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.
Test Report # 17H‐003020(R1) Pages: Page 195 of 195
ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip StreetKwun Tong Kowloon Hong Kong Tel: (852)31858000
Ver.10CS-HK-RE005-POLY
†SAMPLE PHOTO:
‐End Report‐