TEST REPORT - Hit Promotional Products - Site · CONCLUSION TEST(S) CONDUCTED PASS CPSIA Section...

The above test(s) is/are accredited under the laboratory’s ISO/IEC 17025 accreditation issued by the ANSI‐ASQ National Accreditation Board (ANAB) according to certificate and scope of accreditation (Certificate # AT‐1500.) Test(s) marked with ‘#’ is/are not covered under the scope of accreditation.

The test result(s) and conclusion(s) in this report relate to the sample(s) tested as described herein. This test report may not be reproduced in whole or in part, without written approval of ANSECO Group (HK) Limited.

ANAB is recognized by ILAC, APLAC and IAAC as a signatory of multilateral recognition arrangements that facilitate acceptance of test internationally.

TEST REPORT Test Report # 16H‐03971 Date of Report Issue: July 28, 2016

Date of Sample Received: July 12, 2016 Pages: of 29

ANSECO GROUP (HK) LIMITED 3/F Liven House No. 61 – 63 King Yip Street Kwun Tong Kowloon Hong Kong Tel: (852)3185 8000

AT-1500

Ver.06CS-HK-RE005-HITP

CLIENT INFORMATION:

Company: Hit Promotional Products

Recipient: Nathan Cotter

Recipient Email: [email protected]

SAMPLE INFORMATION:

Description: 24oz Biggie Tumbler with Lid & 16oz Glacier Tumbler with straw

Assortment: 5853‐8 colors, 5889‐5 colors

Purchase Order Number: 167824

SKU No.: 5853, 5889 Agent: Brand New Days

Factory No.: 106712 Country of Origin: China

Country of Distribution: United States Labeled Age Grade: ‐

Quantity Submitted: Refer to Page 2 Recommended Age Grade: ‐

Testing Period: 07/12/2016 – 07/22/2016 07/23/2016 – 07/28/2016

Tested Age Grade: ‐

OVERALL RESULT:

PASS

Refer to page 3 for test result summary and appropriate notes.

ANSECO GROUP (HK) LIMITED

Vincent Chow Wai Kit

Manager, Chemical Laboratory




Test Report # 16H‐03971 Pages: of 29



QUABTITU SUBMIITED DETAILED:

Style description Qty.

24oz Bigger Tumbler with Lid ‐ Red 7 pcs

24oz Bigger Tumbler with Lid ‐ Black 8 pcs

24oz Bigger Tumbler with Lid ‐ Lime 7 pcs

24oz Bigger Tumbler with Lid ‐ Orange 8 pcs

24oz Bigger Tumbler with Lid ‐ Smoke 8 pcs

24oz Bigger Tumbler with Lid ‐ Purple 8 pcs

24oz Bigger Tumbler with Lid‐Blue 8 pcs

24oz Bigger Tumbler with Lid ‐ Aqua 6 pcs

16oz Glacier tumbler with straw ‐ Red 5 pcs

16oz Glacier tumbler with straw ‐ Green 5 pcs

16oz Glacier tumbler with straw ‐ Blue 5 pcs

16oz Glacier tumbler with straw ‐ Black 5 pcs

16oz Glacier tumbler with straw ‐ Clear 5 pcs

Parts 2 lots







TEST RESULTS SUMMARY:

At the request of the client, the following tests were conducted:

CONCLUSION TEST(S) CONDUCTED

PASS CPSIA Section 101, Total Lead in Substrate Materials

PASS Client’s Requirement: Bisphenol A and Bisphenol S#

PASS FDA 21 CFR 177.1210, Closures with Sealing Gaskets#

PASS FDA 21 CFR 177.1520, Polypropylene Homopolymers

PASS FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Butadiene/Styrene Copolymers

PASS FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers

PASS Canadian Consumer Products Containing Lead (Contact with Mouth) Regulation (SOR/2010‐273), Total Lead in Accessible Substrates







DETAILED RESULTS:

CPSIA Section 101, Total Lead in Substrate Materials Test Method: CPSC‐CH‐E1001‐08.3 (Metal), CPSC‐CH‐E1002‐08.3 (Non‐Metal) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry

Specimen No. 1 2+3+4 5+6+7 8+9+10 11+12+13 Total

Test Item Result (ppm)

Result (ppm)

Result (ppm)

Result (ppm)

Result (ppm)

Limit (ppm)

Total Lead (Pb) ND ND ND ND ND 100

Conclusion PASS PASS PASS PASS PASS

Specimen No. 14+15+16 17+18+19 20+21+22 23+24+25 26+27+28 Total


Result (ppm)

Result (ppm)

Result (ppm)

Result (ppm)

Limit (ppm)



Specimen No. 29+30+31 32+33 34+35 36+37 ‐‐‐ Total


Result (ppm)

Result (ppm)

Result (ppm)

Result (ppm)

Limit (ppm)

Total Lead (Pb) ND ND ND ND ‐‐‐ 100

Conclusion PASS PASS PASS PASS ‐‐‐

Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Data Consolidation Reference

Specimen No. Transferred from

Date of Issue Report No. Specimen No.

1 16H‐03520 1 June 29, 2016

36+37 16H‐03520 7+8 June 29, 2016







DETAILED RESULTS: Client’s Requirement: Bisphenol A and Bisphenol S Test Method: AI|ANSECO Method#

Analytical Method: Liquid Chromatography with Mass Spectrometry

Specimen No. 1 2 3 4

Test Item CAS No. Result (ppb)

Result (ppb)

Result (ppb)

Result (ppb)

Limit (ppb)

Bisphenol A (BPA) 80‐05‐7 ND ND ND ND ND

Bisphenol S (BPS) 80‐09‐1 ND ND ND ND ND

Conclusion PASS PASS PASS PASS



Result (ppb)

Result (ppb)

Result (ppb)

Limit (ppb)






Result (ppb)

Result (ppb)

Result (ppb)

Limit (ppb)




Note: ppb (Parts per billion) = µg/kg (Micrograms per kilogram) LT = Less than ND = Not detected (Reporting limit: BPA = 1000 ppb; BPS = 200 ppb)











Result (ppb)

Result (ppb)

Result (ppb)

Limit (ppb)






Result (ppb)

Result (ppb)

Result (ppb)

Limit (ppb)






Result (ppb)

Result (ppb)

Result (ppb)

Limit (ppb)















Result (ppb)

Result (ppb)

Result (ppb)

Limit (ppb)






Result (ppb)

Result (ppb)

Result (ppb)

Limit (ppb)















Result (ppb)

Result (ppb)

Result (ppb)

Limit (ppb)




Specimen No. 38 ‐‐‐ ‐‐‐ ‐‐‐


Result (ppb)

Result (ppb)

Result (ppb)

Limit (ppb)

Bisphenol A (BPA) 80‐05‐7 ND ‐‐‐ ‐‐‐ ‐‐‐ ND

Bisphenol S (BPS) 80‐09‐1 ND ‐‐‐ ‐‐‐ ‐‐‐ ND

Conclusion PASS ‐‐‐ ‐‐‐ ‐‐‐

Note: ppb (Parts per billion) = µg/kg (Micrograms per kilogram) LT = Less than ND = Not detected (Reporting limit: BPA = 1000 ppb; BPS = 200 ppb) Data Consolidation Reference



1 16H‐03520 1 June 29, 2016

2 16H‐03520 2 June 29, 2016

26 16H‐03520 9 June 29, 2016

30 16H‐03520 12 June 29, 2016

37 16H‐03520 14 June 29, 2016

38 16H‐03520 13 June 29, 2016







DETAILED RESULTS:

FDA 21 CFR 177.1210, Closures with Sealing Gaskets Test Method: FDA 21 CFR 177.1210#

Specimen No. 1

Test Item Test Condition

Result RL Limit Temp. Duration

Distilled water extractive (ppm) 120°F 24 hours ND 10 50

Conclusion PASS

Note: Temp. = Temperature °F = Degree Fahrenheit ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1210 Table 2 Section 2.







DETAILED RESULTS: FDA 21 CFR 177.1520, Polypropylene Homopolymers Test Method: FDA 21 CFR 177.1520

Specimen No. 2



Density (g/cc) NA NA 0.901 NA 0.880 – 0.913

Melting point (oC) NA NA 163.1 NA 150 – 180

n‐Hexane extractive (% w/w) Reflux 2 hours 2.1 0.1 6.4

Xylene extractive (% w/w) 25oC 1 hour 2.7 0.5 9.8

Conclusion PASS

Specimen No. 3







Conclusion PASS

Note: Temp. = Temperature °C = Degree Celsius g/cc = Grams per cubic centimeter % w/w = Percent by weight NA = Not applicable LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 177.1520 (c) 1.1.








Specimen No. 4







Conclusion PASS

Specimen No. 5







Conclusion PASS









Specimen No. 6







Conclusion PASS

Specimen No. 7







Conclusion PASS









Specimen No. 8







Conclusion PASS

Specimen No. 9







Conclusion PASS









Specimen No. 10







Conclusion PASS

Specimen No. 16







Conclusion PASS









Specimen No. 17







Conclusion PASS

Specimen No. 18







Conclusion PASS









Specimen No. 19







Conclusion PASS

Specimen No. 20







Conclusion PASS








Data Consolidation Reference



2 16H‐03520 2 June 29, 2016







DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Butadiene/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry

Acrylonitrile Monomers:

Specimen No. 21

Test Simulant Test Condition


Distilled water extractive (mg/in2) 120oF 2 hours ND 0.001 0.003

3% Acetic acid extractive (mg/in2) 120oF 2 hours ND 0.001 0.003

Conclusion PASS

Specimen No. 22





Conclusion PASS

Specimen No. 23





Conclusion PASS

Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3).







DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Butadiene/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry


Specimen No. 24





Conclusion PASS

Specimen No. 25





Conclusion PASS








DETAILED RESULTS: FDA 21 CFR 180.22 and 181.32, Acrylonitrile/Styrene Copolymers Test Method: FDA 21 CFR 180.22 and 181.32 Analytical Method: Headspace‐Gas Chromatography with Mass Spectrometry


Specimen No. 11





Conclusion PASS

Specimen No. 12





Conclusion PASS

Specimen No. 13





Conclusion PASS










Specimen No. 14





Conclusion PASS

Specimen No. 15





Conclusion PASS

Specimen No. 26





Conclusion PASS










Specimen No. 27





Conclusion PASS

Specimen No. 28





Conclusion PASS

Specimen No. 29





Conclusion PASS










Specimen No. 30





Conclusion PASS

Specimen No. 31





Conclusion PASS

Specimen No. 32





Conclusion PASS










Specimen No. 33





Conclusion PASS

Specimen No. 34





Conclusion PASS

Specimen No. 35





Conclusion PASS










Specimen No. 37





Conclusion PASS

Specimen No. 38





Conclusion PASS

Note: Temp. = Temperature °F = Degree Fahrenheit mg/in2 = Milligrams per square inch LT = Less than ND = Not detected. Result value is less than reporting limit (RL). Remark: The specification is quoted from 21 CFR 181.32 (b) (3). Data Consolidation Reference



26 16H‐03520 9 June 29, 2016

30 16H‐03520 12 June 29, 2016

37 16H‐03520 14 June 29, 2016

38 16H‐03520 13 June 29, 2016







DETAILED RESULTS: Canadian Consumer Products Containing Lead (Contact with Mouth) Regulation (SOR/2010‐273), Total Lead in Accessible Substrates Test Method: CPSC‐CH‐E1001‐08.3 (Metal), CPSC‐CH‐E1002‐08.3 (Non‐Metal) Analytical Method: Inductively Coupled Plasma‐Optical Emission Spectrometry

Specimen No. 1 2+3+4 5+6+7 8+9+10 11+12+13 Total


Result (ppm)

Result (ppm)

Result (ppm)

Result (ppm)

Limit (ppm)



Specimen No. 14+15+16 17+18+19 20+21+22 23+24+25 26+27+28 Total


Result (ppm)

Result (ppm)

Result (ppm)

Result (ppm)

Limit (ppm)



Specimen No. 29+30+31 32+33 34+35 36+37 ‐‐‐ Total


Result (ppm)

Result (ppm)

Result (ppm)

Result (ppm)

Limit (ppm)

Total Lead (Pb) ND ND ND ND ‐‐‐ 90

Conclusion PASS PASS PASS PASS ‐‐‐

Note: ppm (Parts per million) = mg/kg (Milligrams per kilogram) LT = Less than ND = Not detected (Reporting Limit = 20 ppm) Composite results are based on specimen of least mass resulting in highest potential concentration. Data Consolidation Reference



1 16H‐03520 1 June 29, 2016

36+37 16H‐03520 7+8 June 29, 2016







SPECIMEN DESCRIPTION:

Specimen No. Specimen Description Location

1 Translucent soft plastic (Silicone) Gasket (all 16oz tumbler styles)

2 Black plastic (PP‐homo) Lid (24oz tumbler – Black style)

3 Grey plastic (PP‐homo) Lid (24oz tumbler – Smoke style)

4 Red plastic (PP‐homo) Lid (24oz tumbler – Red style)

5 Orange plastic (PP‐homo) Lid (24oz tumbler – Orange style)

6 Light green plastic (PP‐homo) Lid (24oz tumbler – Lime style)

7 Light blue plastic (PP‐homo) Lid (24oz tumbler – Aqua style)

8 Blue plastic (PP‐homo) Lid (24oz tumbler – Blue style)

9 Purple plastic (PP‐homo) Lid (24oz tumbler – Purple style)

10 Light grey plastic (PP‐homo) Slider (all 24oz tumbler styles)

11 Matt transparent red plastic (AS) Lid (16oz tumbler – Red style)

12 Transparent green plastic (AS) Lid (16oz tumbler – Green style)

13 Matt transparent blue plastic (AS) Lid (16oz tumbler – Blue style)

14 Transparent grey plastic (AS) Lid (16oz tumbler – Black style)

15 Off transparent plastic (AS) Lid (16oz tumbler – Clear style)

16 Translucent red plastic (PP‐homo) Straw (16oz tumbler – Red style)

17 Translucent green plastic (PP‐homo) Straw (16oz tumbler – Green style)

18 Translucent blue plastic (PP‐homo) Straw (16oz tumbler – Blue style)

19 Translucent black plastic (PP‐homo) Straw (16oz tumbler – Black style)

20 Translucent plastic (PP‐homo) Straw (16oz tumbler – Clear style); ring of straw (all 16oz tumbler styles)

21 Dull transparent red plastic (ABS) Slider (16oz tumbler – Red style)

22 Dull transparent green plastic (ABS) Slider (16oz tumbler – Green style)

23 Dull transparent blue plastic (ABS) Slider (16oz tumbler – Blue style)

24 Dull transparent black plastic (ABS) Slider (16oz tumbler – Black style)

25 Dull transparent plastic (ABS) Slider (16oz tumbler – Clear style)

26 Transparent red plastic (AS) Inner wall (24oz tumbler – Red style)







SPECIMEN DESCRIPTION:

Specimen No. Specimen Description Location

27 Transparent orange plastic (AS) Inner wall (24oz tumbler – Orange style)

28 Transparent light green plastic (AS) Inner wall (24oz tumbler – Lime style)

29 Transparent light blue plastic (AS) Inner wall (24oz tumbler – Aqua style)

30 Transparent blue plastic (AS) Inner wall (24oz tumbler – Blue style)

31 Transparent purple plastic (AS) Inner wall (24oz tumbler – Purple style)

32 Off transparent red plastic (AS) Inner wall (16oz tumbler – Red style)

33 Off transparent green plastic (AS) Inner wall (16oz tumbler – Green style)

34 Off transparent blue plastic (AS) Inner wall (16oz tumbler – Blue style)

35 Off transparent black plastic (AS) Inner wall (16oz tumbler – Black style)

36 Transparent plastic Outer wall (all styles); Inner wall (16oz tumbler – Clear/ 24oz tumbler – Black styles)

37 Transparent black plastic (AS) Inner wall (24oz tumbler – Smoke style)

38 Transparent plastic (AS) Inner wall (16oz tumbler – Clear/ 24oz tumbler – Black styles)







SAMPLE PHOTO:

‐End Report‐

TEST REPORT - Hit Promotional Products - Site · CONCLUSION TEST(S) CONDUCTED PASS CPSIA Section...

Documents

Transcript of TEST REPORT - Hit Promotional Products - Site · CONCLUSION TEST(S) CONDUCTED PASS CPSIA Section...