User’s Guide Specificationcontent.etilize.com/User-Manual/1011990242.pdf · MODEL BRAND Printing...
Transcript of User’s Guide Specificationcontent.etilize.com/User-Manual/1011990242.pdf · MODEL BRAND Printing...
담 당 관 리 자
MODEL BRAND
Printing Specification
1. Trim Size (Format) : 185 mm x 260 mm2. Printing Colors• Cover : 1 COLOR (BLACK)•Inside : 1 COLOR (BLACK)3. Stock (Paper)• Cover : Coated paper , Snow White 150 g/• Inside : Uncoated paper , 백상지 60 g/4. Printing Method : OFF-SET5. Bindery : Saddle stitch6. Language : English7. Number of pages : 36 PAGE
Model Description
Part No.
2.
User’s Guide Specification1.
User’s Guide Specification
Changes 4.
REV.NO. MM/DD/YY SIGNATURE CHANGE NO. CHANGE CONTENTS
1
2
4
5
7
6
SUFFIX
32/37/42LC5DC32LX5DC/42PX8DC LG
MFL34797007(0809-REV10)
(1) Origin Notification* LGESY : China * LGEVN : Vietnam * LGEEG : Egypt * LGEAZ : Brazil* LGENP : China * LGETH : Thailand * LGEMA : Poland * LGEIN : Indonesia * LGEIL : India * LGERA : Russia* LGEDI : Indonesia * LGEAK : Kazakhstan * LGERS : Mexico
8
9
Special Instructions3.
Product Name 32/37/42LC5DC,32LX5DC,42PX8DC
KIM WON MI
07.04.09
KANG KWANG SUK
07.04.09
USA
April.09.07 KIM WON MI S7-78950
April.26.07 KIM WON MI S7-80992
“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level, Details should be followed Eco-SCM management standard[LG(56)-A-2524].Especially, Part should be followed and controlled the following specification.(1)Eco-hazardous substances test report should be submitted
when Part certification test and First Mass Production.(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
NOTES
[PA74A/LA74A ] Revised the CD Manual/Simple Book by PQ test results.
[PA74A/LA74A ]Changed the CD manual/Simple book for add the model name.
June.12.07 Park Sun Young S7-85352 Applied the PQ test results of 32LX5DC-UA
June.22.07 Park Sun Young S7-85870 Applied the PQ test results of 42PX8DC-UA
[ PA64A/LA64A ] Added the 42LB5DC-UA model name.Sep.04.07 KIM WON MI S7-93931
Sep./13/07 KIM WON MI S7-94054Added the D-RRT function and corrected the RS-232C
in the manual.
May/03/08 KIM WON MI S8-21950 [ RUSHMORE ] Add the screw and model name.
July/14/08 KIM WON MI S8-25428 [ PA80A ] Add the model name.
Pagination sheetPagination sheet P/NO. MFL34797007Total pages : 36 pages
Front cover
2 …
LG(EN)
P/No.
Rear cover
Blank Page
LG
34…
REV.NO. MM/DD/YY SIGNATURE CHANGE NO. CHANGE CONTENTS
10
11
3
4
5
7
6
8
9
Changes 4.
July/28/08 KIM WON MI S8-26653 [ LA64A ] ADD THE PROTECTIVE BRACKET AND BOLTS FOR POWERCORD
Sep./08/08 KIM WON MI S8-29753 [ PA80A ] Revised the manual/cd revision as PQ test results.
P/NO : MFL34797007 (0809-REV10)Printed in Korea
www.lgcommercial.com
Please read this manual carefully before operatingyour set. Retain it for future reference.Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you requireservice.
LCD TVOWNER’S MANUAL
PLASMA TV MODEL42PX8DC42PG65C42PG60C
PLASMA TV
32LC5DC32LC5DCS32LC5DCB37LC5DC37LC5DCB37LC5DC142LC5DC32LX5DC32LX5DCS42LB5DC
32LC50C32LC50CS32LC50CB32LX50C32LX50CS37LC50C37LC50CB42LB50C42LC50C
LCD TV MODELS
MFL34797007en-simp 9/8/08 3:15 PM Page 1
2
WARNING / CAUTION
WARNING / CAUTION
To prevent fire or shock hazards, do not expose
this product to rain or moisture.
FCC NOTICE
Class B digital device
This equipment has been tested and found to com-ply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation. Thisequipment generates, uses and can radiate radio fre-quency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications. However,there is no guarantee that interference will notoccur in a particular installation. If this equipmentdoes cause harmful interference to radio or televi-sion reception, which can be determined by turningthe equipment off and on, the user is encouraged totry to correct the interference by one or more ofthe following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipmentand receiver.
- Connect the equipment to an outlet on a circuitdifferent from that to which the receiver is con-nected.
- Consult the dealer or an experienced radio/TVtechnician for help.
Any changes or modifications not expresslyapproved by the party responsible for compliancecould void the user’s authority to operate theequipment.
CAUTION
Do not attempt to modify this product in any waywithout written authorization from LG Electronics.Unauthorized modification could void the user’sauthority to operate this product
The lightning flash with arrowheadsymbol, within an equilateral triangle,is intended to alert the user to the
presence of uninsulated “dangerous voltage”within the product’s enclosure that may be ofsufficient magnitude to constitute a risk of electricshock to persons.
The exclamation point within an equilateraltriangle is intended to alert the user to
the presence of important operating and main-tenance (servicing) instructions in the literatureaccompanying the appliance.
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV systeminstaller’s attention to Article 820-40 of the NationalElectric Code (U.S.A.). The code provides guidelines forproper grounding and, in particular, specifies that thecable ground shall be connected to the grounding sys-tem of the building, as close to the point of the cableentry as practical.
MFL34797007en-simp 9/8/08 3:15 PM Page 2
3
IMPORTANT SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
Read these instructions.Keep these instructions.Heed all warnings.Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install inaccordance with the manufacturer’s instructions.
Do not install near any heat sources such asradiators, heat registers, stoves, or other apparatus(including amplifiers)that produce heat.
Do not defeat the safety purpose of the polarizedor grounding-type plug. A polarized plug hastwo blades with one wider than the other. Agrounding type plug has two blades and athird grounding prong, The wide blade or thethird prong are provided for your safety. If theprovided plug does not fit into your outlet,consult an electrician for replacement of theobsolete outlet.
Protect the power cord from being walked onor pinched particularly at plugs, conveniencereceptacles, and the point where they exit fromthe apparatus.
Only use attachments/accessories specified bythe manufacturer.
Use only with the cart, stand, tripod, bracket,or table specified by the manufacturer, or soldwith the apparatus. When a cart is used, usecaution when moving the cart/apparatus com-bination to avoid injury from tip-over.
Unplug this apparatus during lighting stormsor when unused for long periods of time.
Refer all servicing to qualified service personnel.Servicing is required when the apparatus hasbeen damaged in any way, such as power-supply cord or plug is damaged, liquid hasbeen spilled or objects have fallen into theapparatus, the apparatus has been exposed torain or moisture, does not operate normally, orhas been dropped.
Never touch this apparatus or antenna duringa thunder or lighting storm.
When mounting a TV on the wall, make surenot to install the TV by the hanging power andsignal cables on the back of the TV.
Do not allow an impact shock or any objects tofall into the product, and do not drop onto thescreen with something.
CAUTION concerning the Power Cord:It is recommend that appliances be placedupon a dedicated circuit; that is, a singleoutlet circuit which powers only that applianceand has no additional outlets or branchcircuits. Check the specification page of thisowner's manual to be certain.Do not connect too many appliances to thesame AC power outlet as this could result infire or electric shock.
1 8
9
10
11
12
13
14
2
3
4
5
6
7
MFL34797007en-simp 9/8/08 3:15 PM Page 3
4
SAFETY INSTRUCTIONS
Do not overload wall outlets. Overloaded walloutlets, loose or damaged wall outlets, extensioncords, frayed power cords, or damaged orcracked wire insulation are dangerous. Any ofthese conditions could result in electric shockor fire. Periodically examine the cord of yourappliance, and if its appearance indicates damageor deterioration, unplug it, discontinue use ofthe appliance, and have the cord replaced withan exact replacement part by an authorizedservicer. Protect the power cord from physicalor mechanical abuse, such as being twisted,kinked, pinched, closed in a door, or walkedupon. Pay particular attention to plugs, walloutlets, and the point where the cord exits theappliance. Do not make the TV with the power cordplugged in. Do not use a damaged or loosepower cord. Be sure do grasp the plug whenunplugging the power cord. Do not pull on thepower cord to unplug the TV.
WARNING - To reduce the risk of fire or elec-trical shock, do not expose this product to rain,moisture or other liquids. Do not touch the TVwith wet hands. Do not install this product nearflammable objects such as gasoline or candlesor expose the TV to direct air conditioning.
Do not expose to dripping or splashing and donot place objects filled with liquids, such asvases, cups, etc. on or over the apparatus (e.g.on shelves above the unit).
GGRROOUUNNDDIINNGGEnsure that you connect the earth ground wireto prevent possible electric shock (i.e. a TVwith a three-prong grounded AC plug must beconnected to a three-prong grounded AC out-let). If grounding methods are not possible,have a qualified electrician install a separatecircuit breaker. Do not try to ground the unit by connecting itto telephone wires, lightening rods, or gas pipes.
DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSSMains plug is the disconnecting device. Theplug must remain readily operable.
Keep the product away from direct sunlight.
AANNTTEENNNNAASSOOuuttddoooorr aanntteennnnaa ggrroouunnddiinnggIf an outdoor antenna is installed, follow theprecautions below. An outdoor antenna systemshould not be located in the vicinity of over-head power lines or other electric light orpower circuits, or where it can come in contactwith such power lines or circuits as death orserious injury can occur.Be sure the antenna system is grounded so asto provide some protection against voltagesurges and built-up static charges. Section 810 of the National Electrical Code(NEC) in the U.S.A. provides information withrespect to proper grounding of the mast andsupporting structure, grounding of the lead-inwire to an antenna discharge unit, size ofgrounding conductors, location of antenna dis-charge unit, connection to grounding electrodesand requirements for the grounding electrode. AAnntteennnnaa ggrroouunnddiinngg aaccccoorrddiinngg ttoo tthheeNNaattiioonnaall EElleeccttrriiccaall CCooddee,, AANNSSII//NNFFPPAA 7700
CClleeaanniinnggWhen cleaning, unplug the power cord andscrub gently with a soft cloth to preventscratching. Do not spray water or other liquidsdirectly on the TV as electric shock may occur.Do not clean with chemicals such as alcohol,thinners or benzene.
MMoovviinnggMake sure the product is turned off,unplugged and all cables have been removed. Itmay take 2 or more people to carry larger TVs.Do not press against or put stress on the frontpanel of the TV.
VVeennttii llaattiioonnInstall your TV where there is proper ventila-tion. Do not install in a confined space such asa bookcase. Do not cover the product withcloth or other materials (e.g.) plastic whileplugged in. Do not install in excessively dustyplaces.
If you smell smoke or other odors coming fromthe TV or hear strange sounds, unplug thepower cord contact an authorized service center.
On Disposal (Only Hg lamp used LCD TV)The fluorescent lamp used in this product contains asmall amount of mercury. Do not dispose of thisproduct with general household waste. Disposal ofthis product must be carried out in accordance to theregulations of your local authority.
Power Supply
Short-circuitBreaker
Antenna Lead in Wire
Antenna Discharge Unit(NEC Section 810-20)Grounding Conductors(NEC Section 810-21)Ground ClampsPower Service GroundingElectrode System (NECArt 250, Part H)
Ground Clamp
Electric ServiceEquipment
NEC: National Electrical Code
15
20
21
22
23
24
16
17
18
19
MFL34797007en-simp 9/8/08 3:15 PM Page 4
5
CONTENTS
WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PREPARATION
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Back Cover for Wire Arrangement . . . . . . . . . . . . . . . . . . . . . 14
Protection Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Attaching the TV to a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Attaching the TV to a desk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 20
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
WATCHING TV
Turning On the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
HOW TO USE THE OWNER'S MANUAL ON THE CD-ROMTo view the Owner's Manual on the CD-ROM, Adobe Acrobat Reader must be installed on your PC.The “ACRORD" folder on the CD-ROM contains the installation programs for them.
If you want to install those programs, Open the “My Computer” Open the “LG” Open the
“ACRORD” double-click your language.
TO VIEW THE OWNER'S MANUAL ON THE CD-ROMThe Owner's Manual files are included in the supplied CD-ROM.Load the supplied CD-ROM into the CD-ROM drive of your PC.After a while, the web page of the CD-ROM will open automatically. (for Window only)
GG If the web page does not appear automatically, open the Owner's Manual file directly.
Open the “My computer” Open the “LG” Open the “index.htm” file.NOTE
When you select your product,display the PDF file.
You can find the desired contentseasily using the bookmark.
MFL34797007en-simp 9/8/08 3:15 PM Page 5
PR
EPA
RA
TIO
N
6
PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your product. If an accessory is missing, please con-
tact the dealer where you purchased the product.
User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard
compliance for the product.
For further information, see the the Owner's Manual files supplied CD-ROM.
Owner’s Manual, Setup & Operation Guide
for Commercial Mode
ENTER
TV
INPUT MODE
DVD
MULTI
EXIT
OL
EZ SOUND
INFO
SWAP
EZ PIC
TIMER
MUTECH
SAP
CC
RATIO
MENU
VCR
POWER
2
3
6
9
PIPPIP CH - PIP CH + PIP INPUT
ENTER
TV
TV
INPUT
INPUT
MODE
DVD
MULTI
EXIT
VOL
EZ SOUND
INFO
SWAP
EZ PIC
TIMER
MUTECH
SAP
CC
RATIO
MENU
VCR
POWER
1
2
34
5
67
8
90FLASHBACK
PIPPIP CH - PIP CH + PIP INPUT
PAGE
PAGE
Remote Control,Batteries
Power CordCD Manual(Refer to p.5)
LCD TV PLASMA TV
Owner's Manual
http://www.lgusa.comwww.lg.ca
Copyright© 2007 LGE,All Rights Reserved.
LLCCDD TTVV mmooddeell oonnllyy
4-Bolts for standassembly
(Refer to p.11)32/37LC5DC*, 32/37LC50C*
models only
D-sub 15 pin Cable
OOppttiioonn EExxttrraass
1.5V 1.5V
1-Bolt for fixing theCable Holder
(Refer to p.14)
Cable Management(Refer to p.14)
Cable Holder(Refer to p.14)
Only 32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C models
* Slightly wipe stained spot on the
exterior only with the polishing
cloth for the product exterior if
there is stain or fingerprint on
surface of the exterior.
* Do not wipe roughly when remov-
ing stain. Please be cautions of
that excessive pressure may cause
scratch or discoloration.
Polishing ClothThis feature is not available
for all models.
x 2
Torx plus Star head screw(Refer to p.11)
Protective Bracket and Bolt forPower Cord
(This feature is not available for all models.)
(Refer to P.14)
MUTE
RETURN
TIMER
TVPOWERRATIO
CC
ENTER
VOL
CH1
2
34
5
67
8
0 9
FLASHBK
VCR
DVD
INPUT
MENUINFO
i
STB
PA
GE
PIP
SAP
PIP CH-PIP CH+
PIP SWAP PIP INPUT
or
PPllaassmmaa TTVV mmooddeellss oonnllyy
75 ohm Round Cable
(Except 42PG60C/65C)
D-sub 15 Pin Cable
(Except 42PG60C/65C)
Only 42PG65C model
Cable Management ClipBolts for stand
assembly(Refer to P.18)
x 4
Cable Holder
(Except 42PX8DC)
MFL34797007en-simp 9/8/08 3:15 PM Page 6
PR
EPA
RA
TIO
N
7
FRONT PANEL INFORMATION Here shown may be somewhat different from your TV.
If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a
polishing cloth is included with your product, use it).
CHCH
VOLOL
ENTERENTER
MENUMENU
INPUTINPUT
Remote Control Sensor
Power/Standby Indicator
Illuminates red when the TV is in standby mode.Illuminates green when the TV is switched on.
CHANNEL Buttons
VOLUME Buttons
ENTER Button
MENU Button
INPUT Button
ON/OFF Button
32/37/42LC5DC*,32/37/42LC50C*, 42LB5DC, 42LB50C
32LX5DC*, 32LX50C*
CHCH VOLVOL ENTERENTER INPUTINPUTMENUMENU ON/OFFON/OFF
VOLUME Buttons
Remote Control Sensor
Power/StandbyIndicator
Illuminates red when theTV is in standby mode.Illuminates green whenthe TV is switched on.
CHANNEL Buttons
ENTER Button
ON/OFF ButtonINPUT Button
MENU Button
MFL34797007en-simp 9/8/08 3:15 PM Page 7
PR
EPA
RA
TIO
N
8
PREPARATIONPREPARATION
CHVOLMENUINPUT ENTER
INPUT ENTER
INPUT ENTER
VOLUME Buttons
CHANNEL Buttons
ENTER Button
ON/OFF Button
INPUT Button
MENU Button
Remote Control Sensor
Power/Standby Indicator
Illuminates red when the TV is in standby mode.Illuminates green when the TV is switched on.
This TV’s stand is sold, separately.
42PX8DC
INPUTINPUT ENTERENTER
INPUT ENTER
CHVOLMENUINPUT ENTER
CHANNEL (EE, DD)Buttons
VOLUME (-,+)
Buttons
MENUButton
ENTERButton
INPUT Button
CHVOLMENUINPUT ENTER
CHVOLMENUINPUT ENTER
Remote Control Sensor
POWER Button
Power/Standby Indicator
Illuminates red in standby mode.Illuminates blue when the set is switchedon.
42PG60C, 42PG65C
SSttaanndd (Only 42PG65C model)
MFL34797007en-simp 9/8/08 3:15 PM Page 8
PR
EPA
RA
TIO
N
9
BACK PANEL INFORMATION
Here shown may be somewhat different from your TV.
AV IN 2
L/M
ONO
RA
UD
IOVI
DEO
S-VIDEO
( )
ANTENNA IN M.P.I.
11
32/37/42LC5DC*,32/37/42LC50C*, 42LB5DC, 42LB50C 32LX5DC*, 32LX50C*
R
AV IN 2
VID
EOS-
VID
EOL/
MON
OR
AU
DIO
42PX8DC
11
11
AV IN 2
L/M
ONO
RA
UD
IOA
OV
IDE
O
S-VIDEO
88
8
42PG60C, 42PG65C
( )
R
( )
AV IN 2
L/M
ON
OR
AU
DIO
VID
EO
S-VIDEO
11
8
MFL34797007en-simp 9/8/08 3:15 PM Page 9
PR
EPA
RA
TIO
N
10
PREPARATION
R
VIDEO AUDIOVIDEO
AUDIOMONO( )
S-VIDEO
REMOTECONTROL
OUT
RGB IN
AUDIOIN
(RGB, DVI)
RESET
UPDATE
M.P.I.1(DVI)
RJPINTERFACE
2
SERVICE ONLYHDMI/DVI IN
SPEAKEROUT8 AV IN 1COMPONENT IN
DIGITALAUDIO
OUT(OPTICAL)
ANTENNA INANTENNA IN M.P.I.M.P.I.
6
1
5
2
3
4
78910
12
HDMI/DVI IN, HDMI IN
Connect a HDMI (DVI) connection to either input.
DIGITAL AUDIO OUT
Connect digital audio from various types of equip-ment. Note: In standby mode, these ports do not work.
M.P.I
RESET/UPDATE/REMOTE CONTROL OUT
SERVICE ONLY
RGB IN (PC)
Connect the output from a PC.AUDIO IN (RGB, DVI)
Connect the audio from a PC or DTV.
SPEAKER OUT 8Ω
AV (Audio/Video) IN
Connect audio/video output from an externaldevice to these jacks.S-VIDEO
Connect S-Video out from an S-VIDEO device.
COMPONENT IN
Connect a component video/audio device to thesejacks.
RJP INTERFACE
Power Cord Socket
For operation with AC power. Caution: Never attempt to operate the TV on DCpower.
ANTENNA IN
Connect over-the air signals to this jack.
1 8
9
10
11
12
2
3
4
5
6
7
13
13
Here shown may be somewhat different from your TV.
This part mainly use picture for the LCD TV models.
VIDEO AUDIO VIDEO
AUDIO
MONO( )S-VI
DEO
REMOTECONTROL
OUT
RESET UPDATE
1
HDMI IN
SPEAKEROUT8
AV
IN 1
COMPONENT IN2L R
L R
AUDIO(RGB / DVI)
RGB IN
RGB(PC)
RJPINTERFACE
OPTICAL
DIGITALAUDIO OUT
SERVICE ONLY
DVI IN
1
6
9 8
4
4
7102(Only 42PG60C, 42PG65C Models)
5
MFL34797007en-simp 9/8/08 3:15 PM Page 10
PR
EPA
RA
TIO
N
11
Tighten the two of these four screws andthe two Torx plus star head screws (provid-ed as parts of the TV) to secure the TV.Tighten the two Torx plus star head screwswith a star head driver bit (not providedas parts of the TV).
x 2 x 2
x 4
Tighten the stand with thefour screws (provided as partsof the TV).
or
LLCCDD TTVV mmooddeell oonnllyy
STAND INSTALLATION
Carefully place the product screen side downon a cushioned surface that will protect prod-uct and screen from damage.
Assemble the product stand with the productas shown.
Securely install the 4 bolts provided.
1
2
3
( 32/37LC5DC*, 32/37LC50C* )
Carefully place the TV screen side down on acushioned surface to protect the screen fromdamage.
Assemble the product stand with the product asshown.
Tighten the 4 bolts securely using the holes inthe back of the TV.
1
2
3
( 42PG65C )
MFL34797007en-simp 9/8/08 3:15 PM Page 11
PR
EPA
RA
TIO
N
12
PREPARATION
REMOTE CONTROL FUNCTIONSWhen using the remote control, aim it at the remote control sensor on the TV.
ENTER
TVTV
INPUT
INPUT MODE
DVD
MULTI
EXIT
VOL
EZ SOUND INFOSWAPEZ PIC
TIMER
MUTE
CH
SAP
CC RATIOMENU
VCR
POWER
1 2 3
4 5 6
7 8 9
0 FLASHBACK
PIP PIP CH - PIP CH + PIP INPUT
PAGE
NUMBER button
VCR/DVD control buttons
Turns your TV or any other programmed equipment onor off, depending on mode.
In AV 1-2, Component, RGB, HDMI1/DVI, and HDMI2input sources, screen returns to the last TV channel.
External input modes rotate in regular sequence: TV, AV1-2, Component, RGB, HDMI1/DVI and HDMI2.
Selects: RGB,HDMI1/DVI, HDMI2 and Component inputsources.
Adjusts brightness on screen.
Switches the sub picture Double Window or off mode.
Changes the PIP channel.
Select the connected input source for the sub-picture.
Selects the factory preset picture depend on the viewingenvironment.
Selects the factory preset sound for type of program.
Exchange the main/sub images.
Control video cassette recorders or DVD players.
Used to enter a program number for multiple programchannels such as 2-1, 2-2, etc.
Tune to the last channel viewed.
POWER
TV INPUT
INPUT
MULTI
PIP
PIP CH +/-
PIP INPUT
EZ PIC
EZ SOUND
SWAP(or PIPSWAP)
— (DASH)
FLASH BACK
MFL34797007en-simp 9/8/08 3:15 PM Page 12
PR
EPA
RA
TIO
N
13
Open the battery compartment cover on the backside and install the batteries matching correctpolarity (+ with +, - with -).
Install two 1.5V AA batteries(or 1.5V AAA)Don’t mix old or used batteries with new ones.
Close cover.
Use a remote control up to 7 meters distanceand 30 degree (left/right) within the receivingunit scope.
Dispose of used batteries in a recycle bin topreserve environment.
INPUT ENTER
ENTER
TVTV
INPUT
INPUT MODE
DVD
MULTI
EXIT
VOL
EZ SOUND INFOSWAPEZ PIC
TIMER
MUTE
CH
SAP
CC RATIOMENU
VCR
POWER
1 2 3
PIP PIP CH - PIP CH + PIP INPUT
PAGE
Installing Batteries Remote control effective range
Select the remote’s operating mode: TV, DVD, VCR (orSTB).
Change the aspect ratio.
Select a closed caption.
Navigate the on-screen menus and adjust the system set-tings to your preference.
Clears all on-screen displays and returns to TV viewingfrom any menu.
Displays the main menu.
Display information at the top of the screen.
Increase/decrease the sound level.
Select the amount of time before your TV turns off auto-matically.
Switch the sound on or off.
Select available channels.
Move from one full set of screen information to the next one.
MODE
RATIO
CC
THUMBSTICK(Up/Down/Left/Right/ENTER)
EXIT(orRETURN)
MENU
INFO
VOLUME UP/DOWN
TIMER
MUTE
CHANNELUP/DOWN
PAGEUP/DOWN
INPUT ENTER
ENTER
TVTV
INPUT
INPUT MODE
DVD
MULTI
EXIT
VOL
EZ SOUND INFOSWAPEZ PIC
TIMER
MUTE
CH
SAP
CC RATIOMENU
VCR
POWER
1 2 3
PIP PIP CH - PIP CH + PIP INPUT
PAGE
INPUTINPUT ENTERENTER
ENTER
TVTV
INPUT
INPUT MODE
DVD
MULTI
EXIT
VOL
EZ SOUND INFOSWAPEZ PIC
TIMER
MUTE
CH
SAP
CC RATIOMENU
VCR
POWER
1 2 3
4 5 6
PIP PIP CH - PIP CH + PIP INPUT
PAGE
32/37/42LC5DC*, 42LB5DC, 32/37/42LC5DC*,32/37/42LC50C*, 42LB5DC, 42LB50C
32LX5DC*, 32LX50C* 42PX8DC
MUTE
RETURN
TIMER
TV POWER
RATIO CC
ENTER
VOL CH
1 2 3
4 5 6
7 8
0
9
FLASHBK
VCR
DVD
INPUT
MENU INFO i
STB
PAGE
PIP SAP
PIP CH- PIP CH+ PIP SWAP PIP INPUT
(Only 42PG60C, 42PG65C models)
MFL34797007en-simp 9/8/08 3:15 PM Page 13
PR
EPA
RA
TIO
N
14
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
Connect the cables as necessary.
To connect an additional equipment, see the EXTERNAL
EQUIPMENT SETUP section.
Secure the power cable with the PROTECTIVE
BRACKET and the screw as shown. It will help prevent
the power cable from being removed by accident.
Install the CABLE MANAGEMENT as shown.
How to remove the CABLE MANAGEMENT
GG Hold the CABLE MANAGEMENT with both hands andpull it backward.
CABLE MANAGEMENT
GG Do not hold the CABLE MANAGEMENT when movingthe product.
- If the product is dropped, you may be injured or theproduct may be damaged.
NOTE
1
2
Install the CABLE HOLDER as shown.
CABLE HOLDER
2
BOLT
Here shown may be somewhat different from your TV.
PROTECTIVE BRACKET
(This feature is not available for all models.)
MFL34797007en-simp 9/8/08 3:15 PM Page 14
PR
EPA
RA
TIO
N
15
BACK COVER FOR WIRE ARRANGEMENT Here shown may be somewhat different from your TV.
(This feature is not available for all models.)
Connect the cables as necessary.
To connect an additional equipment, see the EXTERNAL
EQUIPMENT SETUP section.
Secure the power cable with the PROTECTIVE
BRACKET and the screw as shown. It will help prevent
the power cable from being removed by accident.
2
Install the CABLE HOLDER as shown.
CABLE HOLDER
3
BOLT
To separate the CABLE HOLDER, loosen the boltinstalled the set.
1
PROTECTIVE BRACKET
MFL34797007en-simp 9/8/08 3:15 PM Page 15
PR
EPA
RA
TIO
N
16
PREPARATION
42PX8DC
Hold the CABLE MANAGEMENT with both hands and pull it as shown.
Connect the cables as necessary.
To connect an additional equipment, see theEXTERNAL EQUIPMENT SETUP section.
1
2
Install the CABLE MANAGEMENT as shown.3
45°
Connect the cables as necessary.
To connect additional equipment, see theEXTERNAL EQUIPMENT SETUP section.
1
Install the CABLE MANAGEMENT CLIP asshown. (Except 42PG60C model)
If your TV has CABLE HOLDER, fix it as shownand bundle the cables.
2
CABLE MANAGEMENT CLIP
CABLE HOLDER
GG Do not hold the CABLE MANAGEMENT CLIPwhen moving the TV.- If the TV is dropped, you may be injured or
the product may be broken.
NOTE!
How to remove the CABLE MANAGEMENT CLIP(Except 42PG60C model)
GG First, press the cable management. Hold theCCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP with bothhands and pull it upward.
42PG60C, 42PG65C
MFL34797007en-simp 9/8/08 3:15 PM Page 16
PR
EPA
RA
TIO
N
17
ATTACHING THE TV TO A WALL
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.
Insert the TV brackets (or eye-bolts) and bolts to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) onthe wall. Match the height of the bracket that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
Use a sturdy rope (not provided as parts of the product, must pur-chase separately) to tie the product. It is safer to tie the rope so itbecomes horizontal between the wall and the product.
The TV can be conveniently swivelled on its stand 20°or 90° to the left or right to provide the opti-
mum viewing angle.
SWIVEL STAND
20° (37LC5DC1, 42LC5DC, 42LC50C, 42PX8DC,
42LB5DC, 42LB50C, 42PG65C models)
90° (32LX5DC/S, 32LX50C/S, 32LC5DC/S,
32LC50C/S, 37LC5DC, 37LC50C models)
This feature is not available for all models.
MFL34797007en-simp 9/8/08 3:15 PM Page 17
PR
EPA
RA
TIO
N
18
PREPARATION
ATTACHING THE TV TO A DESK
The TV must be attached to desk so it cannot be pulled in a forward/backward direction,potentially causing injury or damaging the product.
* SSccrreewwss -- MM55 xx LL ((ttaabbllee ddeepptthh ++ 88~1100 mmmm))ex) table depth-15mm: Bolts - M5 x 25
4-Screws
Stand
Desk
32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C
32LX5DC*, 32LX50C*
4-Screws
Stand
Desk
2-Screws
Stand
Desk
42PG65C
42PX8DC
4-Screws
Stand
Desk
WARNING
GG This apparatus must be securely attached to the floor/wall per installation
instructions.Tipping, shaking, or rocking the television may cause injury/death.
Here shown may be somewhat different from your TV.
MFL34797007en-simp 9/8/08 3:15 PM Page 18
PR
EPA
RA
TIO
N
19
VESA WALL MOUNTING
For proper ventilation, allow a clearance of 4inches on each side from the wall.
Image shown may differ from your TV.
DESKTOP PEDESTAL INSTALLATION
GG Ensure adequate ventilation by following the clearance recommendations.
CAUTION
This product accepts a VESA-compliant mounting interface pad. (optional)
There 4 threaded holes are available for attaching the bracket.
GG Screw length needed depends on the wall mount used. For further information, refer to the VESAWall Mounting Instruction Guide.
NOTE
Product ModelVESA
(A * B)
32LC5DC*, 32LC50C*, 32LX5DC*,32LX50C*
32/37/42LC5DC*, 32/37/42LC50C*,42LB5DC, 42LB50C
42PG60C
42PX8DC
200 * 100
600 * 400
400 * 400
600 * 400
LCD TV
PLASMA TV
AA
BB
4 inches
4 inches
4 inches4 inches
MFL34797007en-simp 9/8/08 3:15 PM Page 19
PR
EPA
RA
TIO
N
20
PREPARATIONPREPARATION
ANTENNA OR CABLE CONNECTION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable BoxConnections.
For optimum picture quality, adjust antenna direction if needed.
2. Cable
WallAntennaSocket
OutdoorAntenna(VHF, UHF)
Cable TVWall Jack
Multi-family Dwellings/Apartments(Connect to wall antenna socket)
RF Coaxial Wire (75 ohm)
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses(Connect to wall jack for outdoor antenna)
Be careful not to bend the bronze wirewhen connecting the antenna.
Copper Wire
ANTENNA IN M.P.I.
ANTENNA IN M.P.I.
ANTENNA IN M.P.I.
GG The TV will let you know when the analog, cable, and digital channel scans are complete.NOTE
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter. If the antenna is not installed properly, contact your dealer for assistance.
Antenna
UHF
Signal
Amplifier
VHF
3. Using both cable and antenna
Cable TVWall Jack
Antenna
RF Coaxial Wire (75 ohm)
RF Coaxial Wire (75 ohm)
ANTENNA IN M.P.I.Diplexer(Signal
Combinner)
MFL34797007en-simp 9/8/08 3:15 PM Page 20
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
21
HD RECEIVER SETUP
EXTERNAL EQUIPMENT SETUP
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you
do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown
below.
( )
( )( )S-VIDEO
M.P.I.1(DVI)
RJPRFACE
2
HDMI/DVI IN
COMPONENT IN
DIGITALAUDIO
OUT(OPTICAL)
VIDEO AUDIO
Y L RPB PR
When connecting Component cable
1 2
1. How to connect
Connect the video outputs (Y, PB, PR) of the digital set
top box to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO jacks onthe set. Match the jack colors
(Y = green, PB = blue, and PR = red).
Connect the audio output of the digital set-top box to
the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO jacks on the set.2
1
2. How to use Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
Select CCoommppoonneenntt input source with using the IINNPPUUTT
button on the remote control.
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
This part of external equipment setup mainly use picture for LCD TV models.
Signal
480i
480p
720p
1080i
1080p
Component
Yes
Yes
Yes
Yes
Yes
HDMI1/DVI, HDMI2
No
Yes
Yes
Yes
Yes
* 42LB5DC, 42LB50C model only
MFL34797007en-simp 9/8/08 3:15 PM Page 21
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
22
EXTERNAL EQUIPMENT SETUP
When connecting Component cable
Connect the video outputs (Y, PB, PR) of the DVD tothe CCOOMMPPOONNEENNTT IINN VVIIDDEEOO jacks on the set.
Match the jack colors
(Y = green, PB = blue, and PR = red).
Connect the audio outputs of the DVD to the
CCOOMMPPOONNEENNTT IINN AAUUDDIIOO jacks on the set.
1. How to connect
2. How to use
Turn on the DVD player, insert a DVD.
Select CCoommppoonneenntt input source with using the IINNPPUUTT
button on the remote control.
Refer to the DVD player's manual for operating instructions.
2
1
DVD SETUP
When connecting HDMI cable
Connect the HDMI output of the DVD to theHHDDMMII//DDVVII IINN 11((DDVVII)) or 22 jack on the set.
No separated audio connection is necessary.
HDMI supports both audio and video.
1. How to connect
2. How to use
Select HHDDMMII11//DDVVII or HHDDMMII22 input source with usingthe IINNPPUUTT button on the remote control.
Refer to the DVD player's manual for operating instructions.
2
1
( )( )S-VIDEO
M.P.I.1(DVI)
RJPERFACE
2
HDMI/DVI IN
COMPONENT IN
DIGITALAUDIO OUT
(OPTICAL)
VIDEO AUDIO
Y L RPB PR
( )
1 2
VIDEO AUDIO( )
M.P.I1(DVI)
RJPINTERFACE
2
HDMI/DVI IN
COMPONENT IN
DIGITALAUDIO OUT
(OPTICAL)
( )
HDMI-DVD OUTPUT
( )
1
MFL34797007en-simp 9/8/08 3:15 PM Page 22
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
23
VCR SETUP
GG Do not connect to both Videoand S-Video at the same time. Inthe event that you connect bothVideo and the S-Video cables,only the S-Video will work.
CAUTION
When connecting with a RCA cable
GG The picture quality is improved: compared to normalcomposite (RCA cable) input.
NOTE
Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV andVCR. Match the jack colors (Video = yellow, Audio Left= white, and Audio Right = red)
1. How to connect
2. How to use
Insert a video tape into the VCR and press PLAY on theVCR. (Refer to the VCR owner’s manual.)
Select AAVV11 input source by using the IINNPPUUTT button onthe remote control.
If connected to AAVV IINN22, select AAVV22 input source.
When connecting with an S-Video cable
Connect the S-VIDEO output of the VCR to theSS --VVIIDDEEOO input on the set.
Connect the audio outputs of the VCR to the AAUUDDIIOO
input jacks on the set.
1. How to connect
2. How to use
Insert a video tape into the VCR and press PLAY on the VCR.(Refer to the VCR owner’s manual.)
Select AAVV11 input source by using the IINNPPUUTT button on theremote control.
If connected to AAVV IINN22, select AAVV22 input source.
1
2
1
GG If you have a mono VCR, connect the audio cable from the VCR to the AAUUDDIIOO LL//MMOONNOO
jack of the set.NOTE
AUDIO
REMOTECONTROL
OUT
R
RESET
UPDATE
M.P.I.SERV
SPEAKEOUT
8 AV IN 1T IN
TALDIO UTCAL)
AUDIOMONO( )
S-VIDEOVIDEO
( )
L RS-VIDEO VIDEO
OUTPUTSWITCH
ANT IN
ANT OUT
ANTENNA IN M.P.I.
( )
AUDIO
REMOTECONTROL
OUT
RESET
UPDATE
M.P.I.SER
SPEAKOUT
8 AV IN 1ENT IN
GITALAUDIO OUT
PTICAL)
AUDIOMONO( )
S-VIDEOVIDEO
L RS-VIDEO VIDEO
OUTPUTSWITCH
ANT IN
ANT OUT
ANTENNA IN M.P.I.
1
1 2
MFL34797007en-simp 9/8/08 3:15 PM Page 23
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
24
EXTERNAL EQUIPMENT SETUP
PC SETUP
When connecting HDMI to DVI cable
Connect the DVI output of the PC to the HHDDMMII//DDVVIIIINN 11((DDVVII)) jack on the set.
Connect the PC audio output to the AAUUDDIIOO IINN((RRGGBB//DDVVII)) jack on the set.
1. How to connect
2. How to use Turn on the PC and the set
Select HHDDMMII11//DDVVII input source with using the IINNPPUUTT
button on the remote control.
2
1
When connecting D-sub 15pin cable
Connect the RGB output of the PC to the RRGGBB IINN
jack on the set.
Connect the PC audio output to the AAUUDDIIOO IINN((RRGGBB,, DDVVII)) jack on the set.
1. How to connect
2. How to use
Turn on the PC and the TV.
Select RRGGBB--PPCC input source by using the IINNPPUUTT buttonon the remote control.
2
1
RGB OUTPUT AUDIO
( )
VIDEOAUDIO
MONO( )S-VIDEO
REMOTECONTROL
OUT
RGB IN
AUDIOIN
(RGB, DVI)
UPDATE
P.I.SERVICE ONLY
SPEAKEROUT8 AV IN 1
1 2
VIDEO( )
1(DVI)
RJPINTERFACE
2
HDMI/DVI IN
COMPONENT IN
OUT(OPTICAL
DVI-PC OUTPUT AUDIO
( )
( )
RGB IN
AUDIOIN
(RGB, DVI)
RVICE ONLY
ER
( )
1
2
MFL34797007en-simp 9/8/08 3:15 PM Page 24
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
25
Supported Display Specifications (RGB/HDMI1-PC)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
31.469 70.08
31.469 59.9437.861 72.8037.500 75.00
35.156 56.2537.879 60.3148.077 72.1846.875 75.00
48.363 60.0056.476 70.0660.023 75.02
47.700 60.00
47.720 59.799
47.130 59.658
Resolution
640x350
* RGB-DOS mode only: 640x350
640x480
800x600
1024x768
Supported Display Specifications (HDMI2-DTV)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
31.500 60.0031.469 59.94
44.960 59.9445.000 60.00
33.720 59.9433.750 60.00
Resolution
720x480
1280x720
1920x1080
1280x768
1360x768
1366x768
Supported Display Specifications (Y, CB /PB, CR /PR)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
15.73 59.9415.73 60.0031.47 59.9431.50 60.00
44.96 59.9445.00 60.00
33.72 59.9433.75 60.00
Resolution
1280x720
1920x1080
720x480
Supported Display Specifications (RGB/HDMI1-DTV)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
31.50 60.0031.47(HDMI1-DTV:31.469) 59.94
44.96 59.9445.00 60.00
33.72 59.9433.75 60.00
Resolution
720x480
1280x720
1920x1080
* Except 42PG60C/65C models in HDMI1-PC mode.
MFL34797007en-simp 9/8/08 3:15 PM Page 25
EX
TE
RN
AL E
QU
IPM
EN
T S
ET
UP
26
Supported Display Specifications (RGB/HDMI1-PC)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
31.469 70.08
31.469 59.9437.861 72.8037.500 75.00
35.156 56.2537.879 60.3148.077 72.1846.875 75.00
48.363 60.0056.476 70.0660.023 75.02
47.700 60.00
47.720 59.799
47.130 59.658
63.668 59.895
65.317 59.978
74.537 59.869
66.587 59.934
74.038 59.950
Resolution
640x350(RGB only)
* RGB-DOS mode only: 640x350
640x480
800x600
1024x768
Supported Display Specifications (HDMI2-DTV)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
31.500 60.0031.469 59.94
44.960 59.9445.000 60.00
33.720 59.9433.750 60.0067.500 60.00
Resolution
720x480
1280x720
1920x1080
1280x768
1360x768
1366x768
Supported Display Specifications (Y, CB /PB, CR /PR)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
15.73 59.9415.73 60.0031.47 59.9431.50 60.00
44.96 59.9445.00 60.00
33.72 59.9433.75 60.0067.50 60.00
Resolution
1280x720
1920x1080
720x480
Supported Display Specifications (RGB/HDMI1-DTV)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
31.50 60.0031.47(HDMI1-DTV:31.469) 59.94
44.96 59.9445.00 60.00
33.72 59.9433.75 60.00
67.43(HDMI1-DTV:67.5) 59.94
Resolution
720x480
1280x720
1920x1080
1280x1024(RGB only)
1400x1050(RGB only)
1600x1200
1920x1080
1920x1200
* 42LB5DC, 42LB50C
MFL34797007en-simp 9/8/08 3:15 PM Page 26
WA
TC
HIN
G T
V
27
WATCHING TV
TURNING ON THE TV
NOTE
GG If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the (or OONN//OOFFFF) button onthe TV or press the PPOOWWEERR button on the remote control.
Select the viewing source by using the IINNPPUUTT((oorr TTVV IINNPPUUTT)) button onthe remote control.
This TV is programmed to remember which power state it was last set to,even if the power cord is out.
When finished using the TV, press the PPOOWWEERR button on the remote con-trol. The TV reverts to standby mode.
1
2
3
Press the CCHH (( ++ or -- )) or CCHH (( or )) or NNUUMMBBEERR buttons to selecta channel number.
1
VOLUME ADJUSTMENT
CHANNEL SELECTION
Press the VVOOLL (( + or -) button to adjust the volume.
If you want to switch the sound off, press the MMUUTTEE button.
You can cancel the Mute function by pressing the MMUUTTEE or VVOOLL (( + or -)button.
Adjust the volume to suit your personal preference.
1
2
3
MFL34797007en-simp 9/8/08 3:15 PM Page 27
WA
TC
HIN
G T
V
28
WATCHING TVWATCHING TV
CHANNEL SETUP
Press the MMEENNUU button and then use DD or EE oror button to select the SSEETTUUPP menu.
Press the GG or button and then use DD or EE oror button to select EEZZ SSccaann.
Press the EENNTTEERR button to begin the channel search.Allow EEZZ SSccaann to complete the channel search cyclefor AANNTTEENNNNAA and CCAABBLLEE.
Automatically finds all channels available through antenna
or cable inputs, and stores them in memory on the channel
list.
Run EZ Scan again after any Antenna/Cable connection
changes.
A password is required to gain access to EZ Scan menu if
the Lock System is turned on.
2
3
1
Auto Scan (EZ Scan)
EZ Scan G
Manual Scan
Channel Edit
DTV Signal
Channel LabelSelection ( G or ) leads youto the EZ scan screen.
EZ Scan G
Manual Scan
Channel Edit
DTV Signal
Channel Label
1
2
3
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel LabelSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
Selection ( G or ) leads youto the EZ scan screen.
MENU Prev.Next
Processing EZ scan...
ANALOG 9
Found Channel(s) 4
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
MFL34797007en-simp 9/8/08 3:15 PM Page 28
WA
TC
HIN
G T
V
29
ON-SCREEN MENUS SELECTION
Press the MMEENNUU button and then use DD or EE or or button to select the eachmenu.
Press the GG or button and then use DD EE FF GG or button to display theavailable menus.
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
2
1
All available TV channels are searched and stored automatically.
User can do manual channel selection and add or deleteindividual channels.
You can add or delete in the channel list.
Displays the DTV signal levels.
Set a label to each channel.
Channel Edit
DTV Signal
Channel Label
Manual Scan
EZ Scan
Selects the factory preset picture depend on the viewingenvironment: Daylight, Normal, Night Time, User1, User2.
Choose one of three automatic color adjustments: Cool, Normal, Warm, User
It is LG Electronic’s unique picture improving technology todisplay a real HD source through an advanced digital signalprocessing algorithm.
Select Auto or Manual (XD Contrast, XD Color, XD NR,MPEG NR).
Cinema Mode (On, Off)Set up the TV for the best picture appearance for viewingmovies.
Black Level (Low, High)Adjusting the contrast and the brightness of the screenusing the black level of the screen.
Use to quickly reset all the Video menu options to theiroriginal factory preset values.
XD
Advanced
Video Reset
Color Temperature
EZ Picture
SETUP
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel LabelSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
VIDEO
EZ Picture
Color Temperature
XD
Advanced
ResetSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
MFL34797007en-simp 9/8/08 3:15 PM Page 29
WA
TC
HIN
G T
V
30
WATCHING TV
The time is set automatically from a digital channel signal. Select your viewing area time zone. Select Auto, Off, On depending on whether or not your
viewing area observes Daylight Saving time.
Set the clock manually.
Select On or Off.
Select On or Off.
Select the amount of time before your TV turns off auto-matically: Off, 10, 20,30, 60, 90, 120, 180, 240.
Off Timer
On Timer
Sleep Timer
Manual Clock
Auto Clock
Select the desired picture format.: Set by program, 4:3, 16:9, Horizon, Zoom1, Zoom2.
Select a caption mode for displaying captioning information: Off, CC1 ~ 4, Text 1 ~ 4.
Customize the DTV/CADTV captions that appear on yourscreen.
Select your desired language for on screen menus: English, Spanish, French.
Use it to minimize any fixed image on the screen.: Normal, White Wash, Orbiter, Inversion.
Reduces the plasma display power consumption.
Choose the desired TV ID number.
Caption Option
Language
ISM Method
Caption/Text
Aspect Ratio
TIME
Auto Clock
Manual Clock
Off Timer
On Timer
Auto OffSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
OPTION
Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power
Set ID
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
You can available other language if a digital signal is pro-vided by the broadcasting station.
Automatically keeps on an equal volume level even if youchange channel.
Selects the factory preset sound for type of program.:Normal, Stadium, News, Music, Theater, and User
Adjust the left/right sound of speaker.
Turn the TV speaker On or off.
Balance
TV Speakers
EZ SoundRite
EZ Sound
Audio Language
AUDIO
Audio Language
EZ SoundRite
EZ Sound
Balance 0
TV SpeakersSCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
Set ID
Low Power
Only 42PX8DC model
MFL34797007en-simp 9/8/08 3:15 PM Page 30
AP
PE
ND
IX
31
LOCK
Automatically adjusts picture position and minimizesimage shaking.
Adjusts screen manually.: Phase, Clock, H-Position, and V-Position
Selematch the resolution of RGB mode and selection ofXGA mode.
To initialize the adjusted value.Reset
Manual config
XGA Mode
Auto config
SCREEN
Auto config.
Manual config.
XGA Mode
Reset
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP
Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating
SCREEN
LOCK
OPTION
TIME
AUDIO
VIDEO
SETUP Select On or Off.
Change the password.
Select a channel number that you wish to block.
Blocks movies according to the movie ratings limits specified.
Prevents children from watching certain children's TV programs,according to the ratings limit set.
Based on the ratings, blocks certain TV programs thatyou and your family do not want to view.
Selecting canadian english language rating system.
Selecting canadian french language rating system.
Enables you to select a source to block from the externalsource devices you have hooked up.
This function may become available in the future and willbe available only for digital channel signal.
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General
TV Rating-English
TV Rating-French
DownloadableRating
Set Password
Lock System
Lock System
Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block
Downloadable Rating Aux. Block
For USA
For Canada
MFL34797007en-simp 9/8/08 3:15 PM Page 31
AP
PE
ND
IX
32
APPENDIX
TROUBLESHOOTING
TThhee ooppeerraattiioonn ddooeess nnoott wwoorrkk nnoorrmmaallllyy..
TThhee vviiddeeoo ffuunnccttiioonn ddooeess nnoott wwoorrkk..
No picture &No sound
No or poor color
or poor picture
Poor reception on
some channels
Lines or streaks
in pictures
Horizontal/vertical bars
or picture shaking
Picture appears slowly
after switching on
The remote control
doesn’t work
Power is suddenly
turned off
Check to see if there is any object between the product and the remote controlcausing obstruction. Ensure you are pointing the remote control directly at the TV.
Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Ensure that the correct remote operating mode is set: TV, VCR etc.
Install new batteries.
Is the sleep timer set?
Check the power control settings. Power interrupted.
No broadcast on station tuned with Auto off activated.
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
Is the power cord inserted into wall power outlet?
Check your antenna direction and/or location.
Test the wall power outlet, plug another product’s power cord into the outletwhere the product’s power cord was plugged in.
This is normal, the image is muted during the product startup process. Pleasecontact your service center, if the picture has not appeared after five minutes.
Adjust Color in menu option.
Keep a sufficient distance between the product and the VCR.
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
Activate any function to restore the brightness of the picture.
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
Check for sources of possible interference.
Check antenna (Change the direction of the antenna).
MFL34797007en-simp 9/8/08 3:15 PM Page 32
AP
PE
ND
IX
33
TThheerree iiss aa pprroobblleemm iinn PPCC mmooddee.. ((OOnnllyy PPCC mmooddee aapppplliieedd))
Adjust resolution, horizontal frequency, or vertical frequency.
Check the input source.
Work the Auto configure or adjust clock, phase, or H/V position. (Option)
Check the signal cable.
Reinstall the PC video card.
The signal is out of range
Screen color is unstableor single color
Vertical bar or stripe on
background & HorizontalNoise & Incorrect position
Press the VOL or VOLUME button.
Sound muted? Press MUTE button.
Try another channel. The problem may be with the broadcast.
Are the audio cables installed properly?
Adjust Balance in menu option.
A change in ambient humidity or temperature may result in an unusual noise whenthe product is turned on or off and does not indicate a fault with the product.
Picture OK & No sound
Unusual sound from inside
the product
No output from one
of the speakers
TThhee aauuddiioo ffuunnccttiioonn ddooeess nnoott wwoorrkk..
MFL34797007en-simp 9/8/08 3:15 PM Page 33
AP
PE
ND
IX
34
APPENDIX
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you canenjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarmwater and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and thenuse it to wipe the screen.
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended Absence
GG If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplugthe power cord to protect against possible damage from lightning or power surges.
CAUTION
2
1
MAINTENANCE
PRODUCT SPECIFICATIONS
Width x Height x Depth With Stand
(inches/mm)
Without Stand
Weight (pounds / kg) With Stand
Without Stand
42PG60C(42PG60C-UA)
42PG65C(42PG65C-UA)
41.1 x 26.7x 4.2 inches 41.1 x 26.7x 3.1 inches
1044.4 x680.5x 107.6mm 1044.4 x680.5x 79.6mm
61.2 pounds / 27.8 kg
55.1 pounds / 25.0 kg
41.1 x 28.9 x12.1 inches
1044.4 x 735.4 x 308.0 mm
(Only 42PG65C)
(Only 42PG65C)
44442222 PPPP GGGG 66660000 CCCC44442222 PPPP GGGG 66665555 CCCC
MFL34797007en-simp 9/8/08 3:15 PM Page 34
AP
PE
ND
IX
35
PRODUCT SPECIFICATIONS
The specifications shown above may be changed without prior notice for quality improvement.
Width x Height x Depth With Stand
(inches/mm)
Without Stand
Weight (pounds / kg) With Stand Without Stand
Width x Height x Depth With Stand
(inches/mm)
Without Stand
Weight (pounds / kg) With Stand
Without Stand
Width x Height x Depth With Stand
(inches/mm)
Without Stand
Weight (pounds / kg) With Stand
Without Stand
Width x Height x Depth With Stand
(inches/mm)
Without Stand
Weight (pounds / kg) With Stand
Without Stand
Width x Height x Depth With Stand
(inches/mm)
Without Stand
Weight (pounds / kg) With Stand
Without Stand
Width x Height x Depth With Stand
(inches/mm)
Without Stand
Weight (pounds / kg) With Stand
Without Stand
32LC5DC/S/B(32LC5DC/S/B-UA)
32LC50C/S/B(32LC50C/S/B-UA)
37LC5DC/1/B(37LC5DC/1/B-UA)
37LC50C/B(37LC50C/B-UA)
AC100-240V ~ 50/60Hz
NTSC-M, ATSC, 64 & 256 QAM
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
75 ohm
32 ~ 104°F (0 ~ 40°C)
Less than 80%
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
36.5 x 27.4 x 10.4 inches926.8 x 695.8 x 264.6 mm
36.5 x24.8 x 4.2 inches926.8 x 629.8 x 107.4 mm
47.2 pounds / 21.4 kg
36.8 pounds / 16.7 kg
31.8 x 23.9 x 9.8 inches806.6 x 607.5 x 249.0 mm
31.8 x 21.7 x 3.8 inches806.6 x 552.3 x 97.2 mm
33.7 pounds / 15.3kg
27.6 pounds / 12.5 kg
42LC5DC(42LC5DC-UA)
42LC50C(42LC50C-UA)
40.7 x 29.6 x 11.6 inches1033.1 x 750.7 x 294.2 mm
40.7 x 27.0x 4.3 inches1033.1 x 686.5 x 110.2 mm
61.3 pounds / 27.8 kg
47.2 pounds / 21.4 kg
Power requirement
Television System
Program Coverage
External Antenna Impedance
Operating Temperature Range
Operating Humidity Range
Storage Temperature Range
Storage Humidity Range
32LX5DC/S(32LX5DC/S-UA)
32LX50C/S(32LX50C/S-UA)
42PX8DC(42PX8DC-UA)
36.3 x 24.2 x 11.3 inches922.0 x 615.0x 288.0 mm
36.3 x 21.5 x 3.9 inches922.0 x 546.0 x 98.0 mm
39.0 pounds / 17.7 kg
30.4 pounds / 13.8 kg
46.7 x 28.1 x 10.6 inches1186.0 x 714.0 x 270.0 mm
46.7 x 25.7 x 3.9 inches1186.0 x 654.0 x 99.0 mm
72.5 pounds / 32.9 kg
55.6 pounds / 25.2 kg
42LB5DC(42LB5DC-UA)
42LB50C(42LB50C-UA)
40.7 x 29.6 x 11.6 inches1033.1 x 750.7 x 294.2 mm
40.7 x 27.0x 4.3 inches1033.1 x 686.5 x 110.2 mm
61.3 pounds / 27.8 kg
47.2 pounds / 21.4 kg
MFL34797007en-simp 9/8/08 3:15 PM Page 35
MFL34797007en-simp 9/8/08 3:15 PM Page 36