Tra•Cam Series - Vehicle presence sensor TrafiCam and... · 17 Tra!Cam x-stream is an...

2
16 TrafiCam series TrafiCam Series - Vehicle presence sensor The TrafiCam series of vehicle presence sensors combines a CMOS camera and video detector in one. The series includes two products: TrafiCam: vehicle presence sensor for standalone use TrafiCam x-stream: vehicle presence sensor and data collector with video streaming Both the TrafiCam and TrafiCam x-stream sensors are used for detection and monitoring of moving and stationary vehicles at signalized intersections. Via detection outputs or via IP protocol, vehicle presence information is transmitted to the traffic controller so that signal timing can be adjusted dynamically. This way, vehicle waiting time at traffic lights is reduced and traffic flows are optimized. The smart TrafiCam sensors are a cost-effective and reliable alternative to inductive loops. Direct visual verification of presence zones The TrafiCam series allows you to exactly position and verify the vehicle presence detection zones. Since these zones are displayed on a video image, you can easily reposition them in case of changing traffic situations. Multiple & direction sensitive vehicle detection zones TrafiCam and TrafiCam x-stream detect vehicles, day and night, in up to 16 zones. This allows vehicle presence detection over different lanes. The TrafiCam series has detection zones indicating presence of vehicles moving in a specific direction. Easy installation and fast configuration TrafiCam is easy to install. You can simply mount it on the existing infrastructure. Presence zones can be easily implemented and changed on a video image. TrafiCam is an esthetic product that combines a CMOS camera and video detector in one. It is the ideal tool for intersection management in urban areas.

Transcript of Tra•Cam Series - Vehicle presence sensor TrafiCam and... · 17 Tra!Cam x-stream is an...

16

Tra�Cam series

Tra�Cam Series - Vehicle presence sensor

The Tra!Cam series of vehicle presence sensors combines a

CMOS camera and video detector in one. The series includes

two products:

• Tra�Cam: vehicle presence sensor for standalone use

• Tra�Cam x-stream: vehicle presence sensor and data

collector with video streaming

Both the Tra!Cam and Tra!Cam x-stream sensors are used

for detection and monitoring of moving and stationary

vehicles at signalized intersections. Via detection outputs or

via IP protocol, vehicle presence information is transmitted

to the tra"c controller so that signal timing can be adjusted

dynamically. This way, vehicle waiting time at tra"c lights is

reduced and tra"c #ows are optimized. The smart Tra!Cam

sensors are a cost-e$ective and reliable alternative to

inductive loops.

Direct visual veri�cation of presence zones

The Tra!Cam series allows you to exactly position and verify the vehicle presence detection

zones. Since these zones are displayed on a video image, you can easily reposition them in case

of changing tra"c situations.

Multiple & direction sensitive vehicle detection zones

Tra!Cam and Tra!Cam x-stream detect vehicles, day and night, in up to 16 zones. This allows

vehicle presence detection over di$erent lanes. The Tra!Cam series has detection zones

indicating presence of vehicles moving in a speci!c direction.

Easy installation and fast con�guration

Tra!Cam is easy to install. You can simply mount it on the existing infrastructure.

Presence zones can be easily implemented and changed on

a video image.

Tra!Cam is an esthetic product that combines a

CMOS camera and video detector in one. It is the ideal

tool for intersection management in urban areas.

1717

Tra!Cam x-stream is an above-ground sensor providing a

wide range of tra"c data on up to 4 lanes.

Key functionalities:

- Vehicle presence detection at intersections

- Data collection (Tra!cam x-stream only)

Key bene�ts:

• All-in-one sensor (camera + video detection)

• Non-intrusive, above-ground installation

• Real-time veri!cation and monitoring

• Real-time tra"c view

Tra�Cam Tra�Cam x-stream

Camera CMOS black & white CMOS color

Data streaming Single image MPEG-4 or H.264

Direction sensitive detection zones yes yes

Vehicle detection zones 8 16

Data collection no up to 4 lanes

Tra�Cam Series

Tra�Cam x-stream

Compared to the standalone Tra!Cam sensor, Tra!Cam x-stream o$ers a number of additional functionalities.

Video streaming

Tra!Cam x-stream o$ers streaming video at full frame rate which can be used for system and tra"c monitoring

in your control room. Tra!Cam x-stream o$ers MPEG-4 or H.264 video compression. A user-friendly web interface

allows Tra!Cam x-stream users to manage their video sources online.

Tra!c data collection

Tra!Cam x-stream is also a cost-e$ective solution for tra"c data collection (volume, speed, occupancy, gap time,

headway and classi!cation on multiple lanes), queue detection and tra"c #ow monitoring on highways and

inter-urban roads. It can be used for temporary or permanent applications.