Sky Photshop

7/28/2019 Sky Photshop

1/8

Overall, its not a bad photo, and unlike several people I know who run for cover at the very mention of having their picture

taken, these two horses didnt seem to mind at all. It might have been a better photo if the wire fence wasnt in the way, but I

could always get rid of it if I really wanted to using the Clone Stamp tool. The problem Im concerned about here is the sky. Its

looking quite dull and could definitely use some help. Theres a lot of detail in the clouds that were not seeing, and the light

blue needs to be deeper, more saturated.Heres what the sky will look like when were done:

The final enhanced sky result.

Lets see how to go about enhancing the sky.

One thing I should point out here before we begin is that if your sky is completely blown-out, meaning that it is overexposed to

the point where it has become pure white and there is no useable image information, this technique wont work. In fact, no

technique will work. Photoshop may be extremely powerful, but it cant create something out of nothing. If thats the case with

your photo, youll need to replace the sky completely. Well look at how to do that in another tutorial.

Step 1: Add A New Blank Layer

With my photo newly opened in Photoshop, I can see in my Layers palette that I currently have one layer, theBackgroundlayer,

which contains my image:


2/8

The Layers palette in Photoshop showing the original image on the Background layer.

I need to add a new blank layer above the Background layer, and the easiest way to do that is by simply clicking on the New

Layer icon at the bottom of the Layers palette:

Clicking on the New Layer icon at the bottom of the Layers palette.

This adds a new blank layer, which Photoshop automatically names Layer 1, above the Background layer:

A new blank layer appears above the Background layer.

Step 2: Reset Your Foreground And Background Colors

You may not need to do this step, but just to keep us both on the same page, press the letter D on your keyboard to reset your

Foreground and Background colors. This sets your Foreground color to black and your Background color to white, which we

can see if we look at the two color swatches near the bottom of the Tools palette. The swatch in the top left shows the current

Foreground color, while the swatch in the bottom right shows the current Background color:


3/8

The Tools palette in Photoshop showing the current Foreground and Background colors.

Step 3: Select The Gradient Tool

Grab the Gradient Tool from the Tools palette, or press G on your keyboard to quickly select it:

Selecting the Gradient Tool from the Tools palette.

Step 4: Select The Foreground to Transparent Gradient

With the Gradient Tool selected and black as our current Foreground color, Right-click (Win) /Control-click(Mac) anywhere

inside the document window and select the Foreground to Transparent gradient from theGradient Picker that appears. Its

the second gradient from the left, top row. Click on it to select it:

Select the "Foreground to Transparent" gradient from the Gradient Picker.

Click anywhere inside the photo to exit out of the Gradient Picker when youre done.

Step 5: Drag Out A Gradient Inside The Photo

With the Foreground to Transparent gradient selected, were going to create our own version of a neutral density filter by

simply dragging out a black-to-transparent gradient inside the photo. Make sure you have Layer 1 selected in the Layers

palette, then click somewhere in the sky portion of the photo and drag straight down until youre below the sky. Hold down

your Shift key as you drag if you want to make sure youre dragging straight down and not on an angle. The area between

where you started dragging and where you stopped dragging will become the visible transition area between the darker areas at

the top of the photo and the lighter areas on the bottom. I want a fairly narrow transition area, so Im going to click just above

the trees to begin my gradient and then drag a short ways down until Im just below the trees:


4/8

Drag a black-to-transparent gradient from the sky to the ground.

If you want a larger transition area with your image, simply drag the gradient across a larger area. A common practice is to start

the gradient at the very top of the image and then drag down to the horizon line. This leaves the darkest area of sky at the top of

the photo and gradually lightens it towards the horizon, a very nice effect.

When I release my mouse button, Photoshop draws the gradient, filling most of my sky with black and then quickly fading it

away as it crosses the trees (my transition area):

The black to transparent gradient is now added to the image.


5/8

The sky is definitely darker now than it was before. Of course, it also looks quite horrible at the moment, but were not done

yet! Hold your horses! (Sorry, I had to say that at some point).

Step 6: Change The Blend Mode Of "Layer 1" To "Overlay"

With "Layer 1" still selected, go up to the Blend Mode option in the top left corner of the Layers palette (where it currently says

Normal). Click on the small, down-pointing arrow to the right of the word Normal and selectOverlay from the list:

Change the blend mode of Layer 1 to Overlay.

With the gradient set to the Overlay blend mode, the black area from the gradient blends in with the photo in a way that makes a

huge improvement to the sky. The contrast has been increased, weve brought out all the details in the clouds, and the sky is

now a deeper, richer blue:

The sky has now been enhanced after changing the blend mode of the gradient layer to Overlay.


6/8

The sky now looks a whole lot better, but by solving one problem, weve created another. The gradient I dragged out covered

not only the sky but also part of the horses, and now they look like theyve been roasting in the sun too long. I need to prevent

the gradient from affecting the horses, and I can do that easily using a layer mask.

Step 7: Add A Layer Mask To "Layer 1"

To add a layer mask, again make sure you still have "Layer 1" selected, then click on the Layer Mask icon at the bottom of theLayers palette:

Clicking on the Layer Mask icon at the bottom of the Layers palette.

This adds a layer mask to the gradient layer. Nothing seems to have happened in the document window, but if we look at the

Layers palette, we can see that a layer mask thumbnail has been added to Layer 1:

The Layers palette in Photoshop now showing a layer mask thumbnail on Layer 1.

Step 8: Select The Brush Tool

Were going to hide the effects of the gradient by painting with black on the layer mask over the areas we want to protect. First,

we need the Brush Tool, so either grab it from the Tools palette or press B on your keyboard:

Selecting the Brush Tool from the Tools palette.


7/8

Step 9: Set Your Foreground Color To Black

Since we want to paint with black, we need to set our Foreground color to black. By default when you have a layer mask

selected (which we currently do), Photoshop sets your Foreground color to white and your Background color to black. All we

need to do here is swap them, and we can do that by pressing the letter X on the keyboard. If we look at the Foreground and

Background color swatches again in the Tools palette, we can see that black is now our Foreground color:

The Tools palette showing black as our current Foreground color.

Step 10: Paint Over The Areas You Want To Protect

With the Brush Tool selected and black as our Foreground color, all we need to do now is paint over the areas that we want to

protect from the effects of the gradient. In my case, I want to paint over the horses. Youll most likely need to change the size of

your brush, and you can do that by pressing the left and right bracket keys on the keyboard (located to the right of the letter

P). The left bracket key makes the brush smaller, and the right bracket key makes the brush larger. Youll probably want to use

a soft-edge brush, and you can control the hardness of the brush by holding down the Shift key and pressing the left and right

bracket keys. Holding Shift and pressing the left bracket key makes the brush softer. Holding Shift and pressing the right

bracket key makes the brush harder.

Simply paint over any areas where you need to hide the effects of the gradient. Here, Im painting over the backs of the horses.

Since Im painting on the layer mask, not on the photo itself, the black color of the brush is not visible. Instead, we see the

effects of the gradient being hidden from view:

Painting with black on the layer mask hides the effects of the gradient.


8/8

If you make a mistake and accidentally paint over an area you didnt mean to, just press X on your keyboard to swap your

Foreground and Background colors again so white becomes your Foreground color. Paint over the mistake with white to bring

back the effects of the gradient, then press X again to set your Foreground color back to black and continue painting.

Im going to finish painting over the areas that I want to protect from the gradient. As I mentioned a moment ago, since were

painting on the layer mask rather than on the image itself, we cant see the color were painting with, but if we look at the layermask thumbnail in the Layers palette, we can see all the areas where weve painted with black:

The layer mask thumbnail in the Layers palette showing the areas where weve painted with black.

And here, after painting away the effects of the gradient over the horses, bringing back their original color and brightness, is my

final enhanced sky result:

The final enhanced sky result.

Sky Photshop

Documents

Transcript of Sky Photshop