sapnote_0000215798

2
7/27/2019 sapnote_0000215798 http://slidepdf.com/reader/full/sapnote0000215798 1/2 03.05.2013 Page 1 of 2 SAP Note 215798 - FBL*N: Special fields are not displayed  Note Language: English Version: 11 Validity: Valid Since 23.08.2010 Summary Symptom In the line item display, special fields are not displayed even though they were maintained in the table T021S using transaction SM31. Other terms FBL1N, FBL3N, FBL5N, RFITEMAR, RFITEMAP, RFITEMGL, OBVU Reason and Prerequisites This is due to an inconsistency between table entries (T021S) for special fields and the relevant data structure (RFPOSXEXT). This could be caused by an incorrect transport or a release upgrade. Due to the release upgrade, the display structure RFPOSXEXT may be reset to the standard setting. As a result, the special fields are lost. Solution To correct this inconsistency, perform the following steps: 1. The special field must exist in the table T021S. Use the following path to check this: Transaction SPRO - > Financial Accounting - > Accounts Receivable and Accounts Payable -> Customer Accounts -> Line Items -> Display Line Items -> Define Additional Fields for Line Item Display. 2. Use transaction SE11 to check whether the special field exists in the structure RFPOSXEXT. The actual field name starts with 'U_' here; for example U_EBELN. If this field is missing, use transaction SE38 to start the program RFPOSXEXTEND. The program regenerates the structure RFPOSXEXT and corrects the inconsistency as a result. 3. To correct the buffer inconsistency, execute the report BALVBUFDEL with the option to reset EUINFO/LTDX only on all application servers. To execute the report safely, you must have at least the following Basis Support Packages in your system: 4.6B Support Package 20 4.6C Support Package 10 4.6D Support Package 03 Alternatively, you can implement Note 378021. When you do so, the report is executed without the selection screen and it resets the entire ALV area of the shared buffer on all active application servers. Header Data Release Status: Released for Customer Released on: 23.08.2010 07:28:00 Master Language: German Priority: Recommendations/additional info Category: Consulting Primary Component: FI-GL-GL-D Reporting/Analysis/Display

Transcript of sapnote_0000215798

7/27/2019 sapnote_0000215798

http://slidepdf.com/reader/full/sapnote0000215798 1/2

03.05.2013 Page 1 of 2

SAP Note 215798 - FBL*N: Special fields are not displayed 

 Note Language: English Version: 11 Validity: Valid Since 23.08.2010

Summary

Symptom 

In the line item display, special fields are not displayed even though they

were maintained in the table T021S using transaction SM31.

Other terms

FBL1N, FBL3N, FBL5N, RFITEMAR, RFITEMAP, RFITEMGL, OBVU

Reason and Prerequisites

This is due to an inconsistency between table entries (T021S) for special

fields and the relevant data structure (RFPOSXEXT). This could be caused by

an incorrect transport or a release upgrade.

Due to the release upgrade, the display structure RFPOSXEXT may be reset to

the standard setting. As a result, the special fields are lost.

Solution

To correct this inconsistency, perform the following steps:

1. The special field must exist in the table T021S. Use the following

path to check this:

Transaction SPRO - > Financial Accounting - > Accounts Receivable and

Accounts Payable -> Customer Accounts -> Line Items -> Display Line

Items -> Define Additional Fields for Line Item Display.

2. Use transaction SE11 to check whether the special field exists in the

structure RFPOSXEXT. The actual field name starts with 'U_' here; for

example U_EBELN. If this field is missing, use transaction SE38 tostart the program RFPOSXEXTEND. The program regenerates the structure

RFPOSXEXT and corrects the inconsistency as a result.

3. To correct the buffer inconsistency, execute the report BALVBUFDEL

with the option to reset EUINFO/LTDX only on all application servers.

To execute the report safely, you must have at least the following

Basis Support Packages in your system:

4.6B Support Package 20

4.6C Support Package 10

4.6D Support Package 03

Alternatively, you can implement Note 378021. When you do so, the

report is executed without the selection screen and it resets the

entire ALV area of the shared buffer on all active application

servers.

Header Data

Release Status: Released for Customer

Released on: 23.08.2010 07:28:00

Master Language: German

Priority: Recommendations/additional infoCategory: Consulting

Primary Component: FI-GL-GL-D Reporting/Analysis/Display

7/27/2019 sapnote_0000215798

http://slidepdf.com/reader/full/sapnote0000215798 2/2

03.05.2013 Page 2 of 2

SAP Note 215798 - FBL*N: Special fields are not displayed 

Secondary Components:

FI-AP-AP-D Reporting/Analysis/Display

FI-AR-AR-D Reporting/Display/Credit Management

 Valid Releases

Software Component Release From

Release

To

Release

and

Subsequent

SAP_APPL 46 46A 46B

SAP_APPL 46C 46C 46C

SAP_APPL 470 470 470

SAP_APPL 500 500 500

SAP_APPL 600 600 600

SAP_APPL 602 602 602

SAP_APPL 603 603 603

SAP_APPL 604 604 604

SAP_APPL 605 605 605 X

Related Notes

Number Short Text

984305 Line item: Definition of special fields (T021S)

407992 Exchanges fields missing in Line Layout

378021 ALV buffer: BALVBUFDEL for all application servers

359028 Line items: Expiring currencies

318028 Line item: special field is not displayed316194 General ledger line item with RE account assignment

208807 Line items: Append fields for RFPOSX are missing

205096 Line items:Special field missing in field list