RESUME

Arnab NandiFlat No. 1A, 1st Floor, 231, Ramkrishna Sarani, Behala, Kolkata - 700060Mobile No - +91- 9830876184 / 9163442223Email: arnab_n1982@yahoo.co.in

Project Manager with 11+ yrs. of experience presently involved in execution of extremely complex full/process turnkey Plant Building & Solution Projects of value INR. 1,500 Cr. in Iron and Steel Industry.8 yrs. experience in Steel Melt Shop project.

I’m aiming to take up opportunities in any organization, involved in construction project activities, that offers higher responsibility and challenges with empowerment and authority; I’m ready to relocate to take overseas assignments as well.

Professional Career

1. Primetals Technologies India Pvt. Limited [formerly VAI Metals Technologies Pvt. Ltd. [formerly SIEMENS Ltd., metals Technologies [formerly SIEMENS VAI Metals Technologies Pvt. Ltd.]]] Kolkata, from Nov’ 2008 to present

Job Responsibility: Project Execution with full profit & loss responsibility starting from order intake up to Final Acceptance by Customer / End of Warranty; key functions are:

i. Project Start Up, Order Entry Calculationii. Planning and organizing of Engineering, Purchasing, Installation of the contractual deliverables within

given time frame and budgetiii. Coordination with Customer and its consultant on regular basis in course of execution for Engineering

Approval, Material and Equipment Inspection and other execution related matters.iv. Building and managing the project team within the organizationv. Progress reporting and project review within organization and with customervi. Project Cost management, revenue and payment realization.vii. Site Management in installation and commissioning phase; planning and execution of advisory

services / site supervision incl. deployment of foreign expatriates.viii. Risk and Opportunity Management in Projectix. Contract and Claim Management; internal and external stakeholders management in projectx. Quality management in coordination with QA, Expediting for deliverables and Project Quality

Management

A. Present assignment (from January 2013 till present):a. Bhilai – BOF_BSP 7.0 MT Expansion – SMS-III (Pkg.025) – (Installation of 3 x 165t/180t LD converters

at BSP, Bhilai) Project as Project Manager (Full Profit/Loss Responsibility)

B. Previous Assignments (From May 2012 to December 2014)b. Installation of 2 x 175t BOF, 2 x 175t LF, and 1 x 175t RH-Degasser at NMDC 3.0 MTPA Integrated

Steel Plant at Nagarnar, Chhattisgarh as Deputy Project Manager.

(From January 2010 to December 2012)c. Bhilai – BOF_BSP 7.0 MT Expansion – SMS-III (Pkg.025) – (Installation of 3 x 165t/180t LD converters

at BSP, Bhilai) Project as Deputy Project Manager (Partial Profit/Loss Responsibility)

(From November 2008 to December 2009)d. Bhilai – BOF_BSP 7.0 MT Expansion – SMS-III (Pkg.025) – (Installation of 3 x 165t/180t LD converters

at BSP, Bhilai) Project as Project Engineer.

C. Completed Assignment (From September 2010 to May 2013)a. Installation of 1x35t Vacuum Degasser Unit at Kalyani Gerdau Steel Ltd., Tadipatri, AP as Project

Manager (Full Profit/Loss Responsibility). (successfully commissioned in May 2013)

Unrestricted Page 1 of 3

2. Tata Motors Ltd., Jamshedpur, Jharkhand, from September 2006 – October 2008Job Responsibility: Engineering Change Management. Key functions were:

i. Analyzing Engineering Changes released by ERC (Engineering Research Centre)ii. Summarizing requirement at component level and organizing new part development with concerned

functions within organization and with sub-suppliersiii. Trial fitment of modified component on vehicles on running production lineiv. Implementation of successful changes on vehicles in coordination with Production and QA departmentv. Planning and organizing timely introduction of new products in the market; vehicle facelifts, up gradation

etc.

3. MARUTI SUZUKI INDIA Ltd., Gurgaon, Haryana, from August 2005 – September 2006Job Responsibility: Shift Manager, M/C Shop Production. Key functions were:

i. Managing daily production of Critical engine components in Machine Shopii. Preparation of Operation standards, implementation of necessary measure for maximum machine tool

uptime and quality improvementiii. Coordination of material flow with minimum inventory, tools management and preventive maintenance

of machine tools with PPC, Stores and maintenance.iv. Housekeeping at shop floorv. Managing EHS requirements in line with Quality Standards

Academic Qualification

→ Jadavpur University, Kolkata, West Bengal.Batch of Mechanical Engineering 2001– 2005Rank: 1st Class First. (Score: 88.25%)

→ St. Xavier’s College, Kolkata.Higher Secondary 1999 – 2001 (Achieved 75.7%, *)

→ Behala Aryya Vidyamandir, Kolkata.High School 1992 to 1999 (Achieved 85.6%, *)

Additional Qualification / Certification→ PM certification according to guidelines of PM@SIEMENS in 2012

(Internal qualification within SIEMENS organization for project managers based on principles of best practices from PMI, IPMA etc.)

IT/Software Skills

1. MS – Office (Word, Excel, Power Point, Outlook). MS-Project.2. ACAD Working Knowledge3. SAP R/3 MM & PP Modules; SAP SPIRIDON – System for:

- Creation of Purchase Requisition,- Placement and management of PO, Vendor Database, Material Masters etc.- Materials Management incl. Goods Receipt, Cost / revenue realization through PoC method, invoicing

and payment realization from customer (technical aspects only)- Tracking of project progress in terms of cost, revenue, progress billing to customer and profit margin

.4. SAP P&E (EasyDMS) – Complete Document management system from creation of documents up to archiving.

Unrestricted Page 2 of 3

Personal DetailsDate of Birth : 28.12.1982Sex : MaleNationality : IndianMarital Status : MarriedLanguages Known : English, Hindi, and Bengali.

Passport No. : M1113460 Current Location : Kolkata Present Designation : Manager – Projects

Date: 03.08.2016Place: Kolkata (ARNAB NANDI)

Unrestricted Page 3 of 3