Proyecto de ciencias

19
SOMOS LOS MEJORES PROYECTO TECNOLOGICO (SISTEMA PLANETARIO) CRISTIAN ANDRES RIVAS KEVIN GARCIA SARMIENTO ALVARO JOSE VASQUEZ ANGELA JULIETH LLANOS 10-3 INSTITUCION EDUCATIVA ELEAZAR LIBREROS SALAMANCA ANDALUCIA (VALLE) 2011-2012

Transcript of Proyecto de ciencias

Page 1: Proyecto de ciencias

SOMOS LOS MEJORES

PROYECTO TECNOLOGICO

(SISTEMA PLANETARIO)

CRISTIAN ANDRES RIVAS

KEVIN GARCIA SARMIENTO

ALVARO JOSE VASQUEZ

ANGELA JULIETH LLANOS

10-3

INSTITUCION EDUCATIVA ELEAZAR LIBREROS SALAMANCA

ANDALUCIA (VALLE)

2011-2012

Page 2: Proyecto de ciencias

SOMOS LOS MEJORES

PROYECTO TECNOLOGICO

(SISTEMA PLANETARIO)

CRISTIAN ANDRES RIVAS

KEVIN GARCIA SARMIENTO

ALVARO JOSE VASQUEZ

ANGELA JULIETH LLANOS

TRABAJO PRESENTADO AL LIC. MARCO AURELIO ORTIZ EN EL ÁREA DE INFORMÁTICA.

INSTITUCION EDUCATIVA ELEAZAR LIBREROS SALAMANCA

ANDALUCIA (VALLE)

2011-2012

TABLA DE CONTENIDO:

Page 3: Proyecto de ciencias

SOMOS LOS MEJORES

1. OBJETIVOS:............................................................................................................................5

1.1. Objetivos generales:........................................................................................................5

1.1.1. Objetivos específicos:.................................................................................................6

2. VISION:.....................................................................................................................................7

3. MISION:....................................................................................................................................8

4. MATRIZ DOFA:........................................................................................................................9

5. MATERIALES:.......................................................................................................................10

6. CONSTRUCCIÓN DEL PROYECTOR CASERO.............................................................11

7. TRADUCION INGLES:.........................................................................................................14

8. GLOSARIO:............................................................................................................................15

9. Wedgrafia:..............................................................................................................................16

Justificación (por qué):

Page 4: Proyecto de ciencias

SOMOS LOS MEJORES

este objeto u proyecto lo creamos porque vemos la necesidad de volver a retomar todo acerca de nuestro sistema solar, mediante un proyector casero.

Page 5: Proyecto de ciencias

SOMOS LOS MEJORES

1. OBJETIVOS:

1.1.Objetivos generales:

Dar a conocer a la comunidad Andaluza como proyectar imágenes o animaciones utilizando herramientas de nuestra vida cotidiana.

Page 6: Proyecto de ciencias

SOMOS LOS MEJORES

1.1.1. Objetivos específicos:

proyectar imágenes o animaciones. Utilizar herramientas de nuestra vida cotidiana. Dar a conocer un proyecto.

Page 7: Proyecto de ciencias

SOMOS LOS MEJORES

2. VISION:

Para el 10 de noviembre de 2011, el proyecto “conéctate con el sistema solar”, será presentado ante la comunidad Andaluza buscando ofrecer un sistema de educación práctica.

Page 8: Proyecto de ciencias

SOMOS LOS MEJORES

3. MISION:

el proyecto “conéctate con el sistema solar”, brindara un servicio a la comunidad Andaluza, ofreciendo un espacio interactivo y educativo con tecnología casera.

Page 9: Proyecto de ciencias

SOMOS LOS MEJORES

4. MATRIZ DOFA:DEVILIDADES: CALIDAD DE PROYECTO.

FALTA DE PRÁCTICA CON EL ENTORNO. MIEDO AL FRACAZO.

OPORTUNIDADES: INVESTIGACION. DAR A MOSTRAR LA CREATIVIDAD. SALIR ADELANTE CON EL PROYECTO.

FORTALEZAS: RESPONSABILIDAD. VISION DE EMPRENDEDORES. EMPEÑO Y MOTIVACION AL

MOMENTO DE EXPONER EL PROYECTO.AMENAZAS: DESCECION DE LA COMUNIDAD AL

MOSTRAR EL PROYECTO. NO CAUSAR AGRADO. MALA EXPRECION ANTE EL PUBLICO

5. MATERIALES:

Page 10: Proyecto de ciencias

SOMOS LOS MEJORES

Linternas. Acetatos o papel transparente. Bola grande de hicopor. Temperas. Cortinas o plásticos (negro). Vareta de maderas. Puntillas. Martillos. Cinta adhesiva. Bisturí. piola. Lápiz.

6. CONSTRUCCIÓN DEL PROYECTOR CASERO

Page 11: Proyecto de ciencias

SOMOS LOS MEJORES

Para realizar esta manualidad es necesario disponer de una linterna con sus baterías cargadas, láminas de plástico transparentes (puede servir rollos de plástico para envolver bocadillos), un lápiz, pincel de punta fina o impresión, cinta adhesiva, tijeras y temperas de colores. Para la base hicopor.

Colocamos la linterna cara hacia abajo sobre la lámina de plástico transparente.

Con un lápiz marcamos el perímetro de la extremo de la linterna.

A continuación con unas tijeras cortamos la pieza que necesitamos (dejamos unos cuantos centímetros de distancia de la circunferencia creada anteriormente.

Fijamos la lámina recortada a la mesa con unas tiras de cinta adhesiva para evitar que se mueva.Ahora toca la parte artística. Cogemos las temperas de colores y las aguamos más de lo normal de manera que la mezcla sea muy poco densa.

Con el pincel dibujamos dentro del círculo el dibujo que queramos proyectar. Es conveniente no dibujar demasiada cerca de la circunferencia si la linterna tiene un marco grande en la zona de la bombilla. Todo aquello que no quede dentro de los haces de luz no se proyectará.

Dejamos secar el dibujo un día entero. No debemos moverlo del sitio para evitar que se corra el color y se estropee el dibujo.

Page 12: Proyecto de ciencias

SOMOS LOS MEJORES

Ahora debemos fijar nuestra lámina en la linterna. Con cuidado situamos la lámina coloreada en la boca de la linterna (la zona donde se ilumina la bombilla), de manera que la circunferencia quede bien centrada.

Cogemos un trozo de cinta adhesiva y la enrollamos alrededor del sobrante de la lámina, fijándola así a la linterna.

Ahora ya tenemos nuestro cañón de luz portable preparado y listo.

Nos situamos en una habitación oscura y a divertirnos proyectando nuestra creación allá donde queramos.

Crea diversas láminas y monta tu propio teatro con figuras de luz!

Page 13: Proyecto de ciencias

SOMOS LOS MEJORES

Page 14: Proyecto de ciencias

SOMOS LOS MEJORES

7. TRADUCION INGLES:

To make this craft is necessary to have a flashlight with batteries charged, transparent plastic film (plastic sheeting can be used to wrap sandwiches), a pencil, fine point brush, tape, scissors, and tempera colors.

We put the torch face down on the sheet of transparent plastic.

With a pencil mark the perimeter of the end of the flashlight.

Then with scissors cut the part you need (leaving a few inches away from the circle created earlier.

We set the cut sheet to the table with strips of tape to prevent it from moving.Now it's the artistic part. We take the color tempera and water down more than usual so that the mixture is very sparse.

With the brush inside the circle draw the drawing you want to project. It is advisable not to draw too close to the circumference if the flashlight has a large frame in the area of the bulb. Anything that is not within the light beams will not be projected.

Let dry a day drawing. We should not move the site to avoid smudging the color and spoil the drawing.

Now we set our film in the lantern. Carefully we place the colored in the mouth of the flashlight (the area where the bulb is lit) so that the circumference is firmly centered.

We take a piece of tape and wrapped around the remainder of the sheet, thus fixing the lantern.

Now we have our portable light cannon and ready.

We find ourselves in a dark room and have fun planning our creation wherever we want.

Create various sheets and ride your own theater with figures of light!

Page 15: Proyecto de ciencias

SOMOS LOS MEJORES

8. GLOSARIO:

Estropear: Echar a perder, malograr cualquier asunto o proyecto.

Page 16: Proyecto de ciencias

SOMOS LOS MEJORES

9. Wedgrafia:

http://www.dibujosparapintar.com/manualidades_proyector_casero.html