Makro•Grip - Thame Workholding · PDF file23 Makro•Grip® 5-Axis Vise page 26...
Transcript of Makro•Grip - Thame Workholding · PDF file23 Makro•Grip® 5-Axis Vise page 26...
23
Makro•Grip®
5-Axis Visepage 26
Makro•Grip®
Dual Clamping Vicepage 52
Makro•Grip®
Profile Clamping Visepage 46
Makro•Grip®
Automation Vicepage 34
Ino•Grip CompactChuck
page 42
Makro•Grip®
Mobile Storage Unitpage 44
Makro•Grip®
Precision Vice Avantipage 66
Makro•Grip®
Precision Vice Variopage 58
Makro•Grip®
Digital Measurement Workstop page 78
Makro•Grip®
Accessories page 72
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
24
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
max. 20.000 N
From unfinished parts to finished products –a solution for any clamping challenge
Makro•Grip® –Get a Grip on workholdinG!
pitch measurement: Actual dimensions of the zero-point system
Clamping stud size:Diameter of the clam-ping stud
torque:Maximum torque
Clamping force:Clamping force with maximum torque
Centering accuracy:Centering tolerance of the vise
Compatible with Auto-mation: Interface for LANG automation included
precision ViceVario
precision Vise avanti
25
Made in GerManY
profile Clamping Vice
5-axis Vice
automation Vice
dual Clamping Vice
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
26
Makro•Grip® 5-Achs-Spanner
Art. Nr. 47120
Makro•Grip® 5-Axis-Vice
Item # 47120 Makro•Grip® 5-Axis-Vice
Item # 47120
Double guided jaws
Stable and sturdy base –lightweight and handy
Equipped with clamping studs for precise clamping in Quick•Point® zero-point system
Equipped with double-sided holding teeth contour. Resting height 3 mm
Centering accuracy± 0.02 mm
Threading to attach end stop
Spindle covers available,see page 76.
Obtain a larger clamping range by reversing the jaws within minutes
Additional clampinglocation for non-stamped workpieces andsemi-finished parts
Makro•Grip® 5-Axis Vice – Compact and unmatched holdingstrength for the 5-face-machining of unfinished parts
27
Makro•Grip® 5-Axis Vice
Best accessability for 5-face-machining Highest holding power at lowest clamping force
due to patented form-closure technology High repeat accuracy for inserting workpieces in holding
contour of jaw – no stoppers needed Large clamping range due to reversible jaws Easy and flexible handling due to lightweight Vices and
integrated zero-point clamping
The best holding power and least amount of wear on the Vice/jaws is achieved by using pre-stamped blanks. (Stamping unit see page 14)
We recommend using a torque wrench when working with our clamping Vices.
Featuresand
Benefits
Makro•Grip® 5-Axis Vice – Compact and unmatched holdingstrength for the 5-face-machining of unfinished parts
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
28
Makro•Grip® 5-Achs-Spanner
Art. Nr. 47065
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 30 NmØ 16 mm5252 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 6000 N
Makro•Grip® 5-Axis Vice 46
Description/TypeClamping range
in mmWeight in kg Order No. Price
Makro•Grip® 5-Axis Vice 46base length 77 mm
0 – 65 1,7 47065
Makro•Grip® 5-Axis Vice 46base length 117 mm
0 – 105 2,5 47105
Makro•Grip® 5-Axis Vice 46base length 157 mm
0 – 145 3,3 47145
Makro•Grip® 5-Axis Vice 46
The perfect centring vice for small parts!
29
Makro•Grip® 5-Axis Vice 46
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
30
Makro•Grip® 5-Achs-Spanner
Art. Nr. 47120
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 70 NmØ 16 mm5252 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 14000 N
Makro•Grip® 5-Axis Vice 77
Makro•Grip® 77
Description/TypeClamping range in
mmWeight in kg Order No. Price
Makro•Grip® 5-Axis Vice 77base length 102 mm
0 – 85 2,7 47085
Makro•Grip® 5-Axis Vice 77base length 130 mm
0 – 120 3,1 47120
Makro•Grip® 5-Axis Vice 77base length 170 mm
0 – 160 3,7 47160
Makro•Grip® 5-Axis Vice 77base length 210 mm
0 – 200 4,4 47200
Enormous holding forces with minimum interference contours –unbeatable!
31
Makro•Grip® 5-Axis Vice 77
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
32
Makro•Grip®
5-Achs-Spanner
Art. Nr. 47205
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 100 NmØ 20 mm9652 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 20000 N
Makro•Grip® 5-Axis Vice 125
Makro•Grip® 125
Description/TypeClamping range
in mmWeight in kg Order No. Price
Makro•Grip® 125base length 160 mm
0 – 155 9,0 47155
Makro•Grip® 125base length 210 mm
0 – 205 10,9 47205
Makro•Grip® 125base length 260 mm
0 – 255 12,8 47255
Makro•Grip® 125base length 310 mm
0 – 305 15,2 47305
Makro•Grip® 125base length 360 mm
0 – 355 17,6 47355
The strong centring vice for major cutting tasks!
33
Makro•Grip® 5-Axis Vice 125
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
34
NEW !
Makro•Grip® Automation Vice –5-Axis Vice for automated manufacturing
Centring accuracy± 0,02 mm
Equipped with clamping studsfor precise clamping in Quick•Point® zero-point system
Ergonomic recessed grip and at the same time adaptation for automation handling system
Colour indicatorsfor bilaterally correctinsertion
Equipped with double-sided holding teeth contour.Resting height 3 mm
Doubleguidedjaws
Thread toattach end stop
Additional clamping location for non-stamped workpieces and semi-finished parts
Non-corrosive, sturdyand handy steel body
Also available: Multiple clamping Automation Vice(see page 40)
35
Featuresand
Benefits
Makro•Grip® Automation Vice
The digital measuring stopis perfect for 5 axis machined workpieces and the change over in clamping to machine the 6th side.
Prepared for LANG automation systems Best accessability for 5-face-machining Highest holding power at lowest clamping force
due to patented form-closure technology High repeat accuracy for inserting workpieces in holding
contour of jaw – no stoppers needed Large clamping range due to reversible jaws Easy and flexible handling due to lightweight Vices and
integrated zero-point clamping
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
36
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 70 NmØ 20 mm9652 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 14000 N
Makro•Grip® Automation Vice 77
The workhorse of automated manufacturing!
Makro•Grip® Automation Vice 77
Description/TypeClamping range
in mmWeightin kg
Order No. Price
Automation Vice 77base length 170 mm
0 – 160 7,2 46160
37
Makro•Grip® Automation Vice
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
38
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 100 NmØ 20 mm9652 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 20000 N
Makro•Grip® Automation Vice 125
Ergonomic and strong!
Makro•Grip® Automation Vice 125
Description/TypeClamping range
in mmWeightin kg
Order No. Price
Automation Vice 125base length 210 mm
0 – 205 9,4 46205
39
Makro•Grip® Automation Vice
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
40
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 70 NmØ 20 mm9652 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 14000 N
Equipped with clamping studs for precise clamping in Quick•Point® zero-pointsystem and ergonomic recessed grip
Colour indicatorsfor bilaterally correctinsertion
Equipped with double-sided holding teeth contour. Resting
height 3 mm
Doubleguidedjaws
Threadto attachend stop
Makro•Grip® Multiple Clamping Automation Vice 77For an increased storage capacity of LANG automation systems
Increased clamping range due to patented reversible jaws
Exchange the middle jaws with the included centre pieces and get a dual clamping vice with an increa-sed range of up to 200mm!
Light-weight aluminum base body with integrated adaptation for
handling system
Makro•Grip® Multible Clamping Automation Vice 77
Description/TypeClamping range
in mmWeightin kg
Order No. Price
Multiple Clamping Automation Vice, base length 210 mm + bump stops, height 89 mm
4x 90 mm 9,8 67090
41
Makro•Grip® Automation Vice
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
42
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 70 NmØ 20 mm9652 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 18000 N 0.04 mm
Ino•Grip Compact – The automatable chuckfor milling work on round parts
Ergonomic recessed grip and at the same time adaptation for
automation handling system
Wear-resistent coated aluminum base body
Actuation screw
Hand-operatedscroll chuck
Repeatability 0,04 mm(even better when jawsare milled under pressure)
Chuck with hardened gripping jaws
Chuck withsoft add-on jaws
Colour indicators forbilaterally correct insertion
Grease nipple for regular lubrication
of the chuck
Ino•Grip Compact chuck
Description/TypeClamping range
in mmWeightin kg
Order No. Price
Ino•Grip CompactDepending on
jaw type5,0 51160
Equipped with clamping studs for precise clamping in Quick•Point®
zero-point system
43
Featuresand
Benefits
Ino•Grip Compact chuck
Applicable to LANG automation systems
Best accessibility for 5-face machining
Parts can be inserted precisely without interfering end stops
Large clamping range due to reversible jaws
Integrated zero-point system
Milling part clamped with gripping jaws. The chuck and the workpiece are fed into the machine automa-tically.
Round part clamped with soft add-on jaws.
Clamping jaws for Ino•Grip Compact chuck
Description/TypeClamping range
in mmWeightin kg
Order No. Price
Gripping jaws, FU 16, hardened, 1 Set = 3 pcs.
30 – 160 0,44 51161
Add-on jaws, FI 16, soft,1 Set = 3 pcs.
5 – 160 0,68 51162
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
44
Space saving, flexible storage for our vices and fixtures
Convenient handlefor pushing andpulling the unit
Non-corrosivegalvanised sheet steel
Easy moving ofthe storage unit with rubberised
casters
Space to hold up to 60 devices(30 devices on each side)
Base dimensions1200 x 800 mm: Idealfor transport on Europallets
Powder coated coolantcollecting tray with integrated coolant drain screw
Makro•Grip® mobile storage unit
Makro•Grip® mobile storage unit
Description/Type Dimensions in mm Order No. Price
Mobile Storage UnitCapacity: max. 60 devices
1200 x 800 x 1500 61060
45
Makro•Grip® Logistics
Your vices and fixturesare always in reach!
Makro•Grip® mobile storage unit next to an Eco•Tower (connected to a GROB G350)
Mobile storage unit shown with automationvices 77 and 125 next to an Eco•Tower (connectedto a DMU 50)
Makro•Grip® storage unit shown with30 automation vices
For all LANG clamping devices with clamping stud distances of 52mm and 96mm
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
46
Makro•Grip®
Profile Clamping
Item # 49080
Makro•Grip® Profile Clamping
Item # 49080
Makro•Grip® Konturspanner
Art.-Nr. 49080
Hardenedbase jaws
Doubleguidedjaws
Stable and sturdy base - lightweight and handy
Centeringaccuracy±0.02mm
Equipped with clamping studs for preciseclamping in Quick•Point® zero-point system
Makro•Grip® Profile Clamping Vice – Your clamping system for all profile parts
Soft add-on jaws. Mounted from the top to the base jaws via 4 screws
(M8x20 / M10x25)
Soft add-on jaws. Mounted frombelow to the base jaws via 4 screws (M8x20 / M10x25)
47
Makro•Grip® Profile ClmapingItem # 49200
Makro•Grip® Profile Clamping
Alternatively, youcan also save money by manufacturing your own soft add-on jaws! Drawings available uponrequest!
Cost effective through manufacturing of your own soft add on jaws
Precision positioning of the add-on jaws through key ways
Quick change over for different shaped individual profile jaws
Large jaw to accommodate multiple profiles in one jaw
Featuresand
Benefits
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
48
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 70 NmØ 16 mm5252 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 14000 N
Makro•Grip® Konturspanner
Art.-Nr. 49080
Makro•Grip® 77 profile clamping vice with base jaws 112x46 mm
Description/TypeDistance x
in mmWeightin kg
Order No. Price
Base length 102 mm 10 3,3 49010
Base length 130 mm 40 3,7 49040
Base length 170 mm 80 4,3 49080
Base length 210 mm 120 5,0 49120
Makro•Grip® profile clamping vice 77with base jaws
49
You are also able to mount your machined add-on jaws top down thanks to the thread in the base jaws.
Soft add-on jaws for Makro•Grip® 77
Description/Type Weightin kg Order No. Price
Add-on jaws steel, 112x57x36 mm, material: 16MnCr5, 1 pair
3,5 49776
Add-on jaws aluminum, 112x57x36 mm, material:AlZnMgCu 1,5, 1 pair
1,2 49777
Add-on profile jaws 77made of steel or aluminum
Makro•Grip® Profile Clamping
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
50
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 100 Nm Ø 20 mm9652 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 20000 N
Makro•Grip
®Konturspanner
Art.-Nr. 49100
Makro•Grip® 125 profile clamping vice with base jaws 160x57 mm
Description/TypeDistance x
in mmWeightin kg
Order No. Price
Base length 160 mm 50 10,4 49050
Base length 210 mm 100 12,3 49100
Base length 260 mm 150 14,2 49150
Base length 310 mm 200 16,6 49200
Base length 360 mm 250 19,0 49250
Makro•Grip® profile clamping vice 125with base jaws
51
You are also able to mount your machined add-on jaws top down thanks to the thread in the base jaws.
Soft add-on jaws for Makro•Grip® 125
Description/Type Weightin kg Order No. Price
Add-on jaws steel, 160x57x47 mm, material: 16MnCr5, 1 pair
8,9 49256
Add-on jaws aluminum, 160x57x47 mm, material: AlZnMgCu 1,5, 1 pair
3,2 49257
Add-on profile jaws 125made of steel or aluminum
Makro•Grip® Profile Clamping
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
52
Makro•Grip® Dual Clamping Vise –Change our Makro•Grip® centering vise to aDual Clamping Vise with our conversion kit
53
Makro•Grip® Dual-Vice
Transform your Makro•Grip® into aMakro•Grip® Dual-Vice within a few moments!
To remove the Makro•Grip® jaws from the base unit, unscrew the jaws using an Allen wrench.
Flip base unit and remove center screw with an Allen wrench.
Remove spindle and centerpiece with a mallet and drift punch.
Replace the spindle + centerpiece with the middle jaw + spindle and tighten the screw on the bottom of the base.
Assemble the Makro•Grip® jaws back onto the base. You are able to use your Makro•Grip® Vice as a Makro•Grip® Dual-Vice now.
Also available as a conversion kit for Dual Profile Clamping (see page 56)
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
54
Spindle and center jaw for Makro•Grip® Dual-Vice 125
Description/TypeFor
Makro•Grip®
Clamping range in mm
Weightin kg
Order No. Price
Spindle length165 mm, Ø20 mm
(47155) 2 x 65 mm 1,30 47155-TG
Spindle length215 mm, Ø20 mm
(47205) 2 x 90 mm 1,35 47205-TG
Spindle length265 mm, Ø20 mm
(47255) 2 x 115 mm 1,50 47255-TG
Spindle length315 mm, Ø20 mm
(47305) 2 x 140 mm 1,60 47305-TG
Spindle length365 mm, Ø20 mm
(47355) 2 x 165 mm 1,70 47355-TG
Spindle and center jaw for Makro•Grip® Dual-Vice 77
Description/TypeFor
Makro•Grip®
Clamping rangein mm
Weightin kg
Order No. Price
Spindle length102,5 mm, Ø16 mm
(47085) 2 x 35 mm 0,55 47085-TG
Spindle length135 mm, Ø16 mm
(47120) 2 x 50 mm 0,60 47120-TG
Spindle length175 mm, Ø16 mm
(47160) 2 x 70 mm 0,70 47160-TG
Spindle length215 mm, Ø16 mm
(47200) 2 x 90 mm 0,75 47200-TG
Spindle and center jaw for Makro•Grip® Dual-Vice 46
Description/TypeFor
Makro•Grip®
Clamping rangein mm
Weightin kg
Order No. Price
Spindle length82 mm, Ø12 mm
(47065) 2 x 25 mm 0,20 47065-TG
Spindle length122 mm, Ø12 mm
(47105) 2 x 45 mm 0,25 47105-TG
Spindle length162 mm, Ø12 mm
(47145) 2 x 65 mm 0,30 47145-TG
Makro•Grip® retrofitting kit – for easy conversionof existing 5-Axis Vices to dual-clamping vices
55
Makro•Grip® Dual clamping vice
Makro•Grip® retrofitting kit – for easy conversionof existing 5-Axis Vices to dual-clamping vices
Makro•Grip®
Dual clampingvice 46
Makro•Grip®
Dual clamping vice 77
Makro•Grip®
Dual clamping vice 125
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
56
Spindle + centre base jaw 112 x 46 mm for profile clamping vice 77
Description/Typefor profile clamping
viceRange in mm
Weightin kg
Order No. Price
Spindle length 175 mm, Ø16 mm (49080) 2 x 18 1,05 49080-TG
Spindle length 215 mm, Ø16 mm (49120) 2 x 36 1,10 49120-TG
Spindle + centre base jaw 160 x 57 mm for profile clamping vice 125
Description/Typefor profile clamping
viceRange in mm
Weightin kg
Order No. Price
Spindle length 215 mm, Ø20 mm (49100) 2 x 20 2,5 49100-TG
Spindle length 265 mm, Ø20 mm (49150) 2 x 45 2,6 49150-TG
Spindle length 315 mm, Ø20 mm (49200) 2 x 70 2,7 49200-TG
Spindle length 365 mm, Ø20 mm (49250) 2 x 95 2,8 49250-TG
Convert your Makro•Grip® profile clamping viceinto a multiple profile clamping vice
57
Makro•Grip® multiple profile clamping vice
Soft add-on jaws for Makro•Grip® Dual-Vice
Description/Type Weightin kg Order No. Price
Soft add-on jaws for Makro•Grip® Dual-Vice 77, steel, 3 pcs., 112x57x36 mm, material: 16MnCr5 5,3 49774
Soft add-on jaws for Makro•Grip® Dual-Vice 77, alumi-num, 3 pcs., 112x57x36 mm, material: AlZnMgCu 1,5 1,8 49775
Soft add-on jaws for Makro•Grip® Dual-Vice 125, steel, 3 pcs., 160x57x47 mm, material: 16MnCr5 13,3 49254
Soft add-on jaws for Makro•Grip® Dual-Vice 125, alumi-num, 3 pcs., 160x57x47 mm, material: AlZnMgCu 1,5 4,8 49255
For converting a Makro•Grip® 5-axis-vice into a multiple profile clamping vice you also needprofile base jaws. See page 74
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
58
Makro•Grip® VarioArt.-Nr. 42097
Double, extended guide rail for the jaws
Centeringaccuracy± 0.01 mm
Positioning accuracyof the pins is ± 0.01 mm
The rows of pins are used as support and end stop
Use an airpistol to extend the pins row by row
Stable and sturdy base - lightweight and handy
Equipped with clamping studs for precise clamping in Quick•Point® zero-point system
Makro•Grip® Precision Vise Vario – The convenient and highly precise clamping solution for machining the 6th side
NEW !
59
Makro•G
rip®
Vario
Art.-Nr. 4
2102
Even small and flat work pieces can be fixed and clamped easily, quickly and safely in Vario•Tec jaws. No more damaging of parallels while drilling near to the jaw.
The pins are blown out with compressed air row by row at high accuracy (±0,01 mm). Push back the pins not needed easily by hand.
And this is how it works:
Featuresand
BenefitsPerfect for the challenging machining of the 6th sideHighly precise No parallels or endstops needed Repeatable feeding and stoppingQuick positioning changesLaser markings on jaws allows easier repeatability of clamping positions
Makro•Grip® Precision Vise Vario
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
60
Makro•Grip® VarioArt.-Nr. 42097
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 70 NmØ 16 mm5252 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 14000 N ± 0,01 mm
Makro•Grip® Precision Vice Vario 77Ideal for flexible machining of small workpieces!
Makro•Grip® Precision Vice Vario 77
Description/TypeClamping range
in mmWeightin kg
Order No. Price
Makro•Grip® Precision Vice Vario 77base length 130 mm
55 3,5 42057
Makro•Grip® Precision Vice Vario 77base length 170 mm
95 4,1 42097
Makro•Grip® Precision Vice Vario 77base length 210 mm
135 4,8 42137
61
4 0
9 13 17 21 25
27
77
10
4
Makro•Grip® Precision Vice Vario
The screws are connected frombehind – Thus the jaws are closedup front. Chip clogging has nochance!
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
62
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 100 NmØ 20 mm9652 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 20000 N ± 0,01 mm
Makro•Grip® Vario
Art.-Nr. 42102
Makro•Grip® Precision Vice Vario 125
Description/TypeClamping range
in mmWeight in kg Order No. Price
Makro•Grip® Precision Vice Vario 125base length 210 mm
100 12,1 42102
Makro•Grip® Precision Vice Vario 125base length 260 mm
150 14,0 42152
Makro•Grip® Precision Vice Vario 125base length 310 mm
200 16,3 42202
Makro•Grip® Precision Vice Vario 125base length 360 mm
250 18,4 42252
Makro•Grip® Precision Vice Vario 125Ideal support and stopper possibility for all kinds of workpieces!
63
6 0
12 18 24 30 36
125
40
15
5
Makro•Grip® Precision Vice Vario
The screws are connected frombehind – Thus the jaws are closedup front. Chip clogging has nochance!
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
64
Ø 3,5 x 2 mm
Accessories for Makro•Grip® Precision Vice Vario
Air pressure pistol
Order No. Amount Price
20004 1
• Ideal handling• Perfect for Makro•Grip® Precision Vise Vario• Best supply of air pressure
O-rings for pins
Size Diameter Order No. Amount Price
Vario 77 2 x 1,5 mm 200009 100pcsVario 125 3,5 x 2 mm 200010
Pins damaged by collision should be replaced.
Replacement pins for Makro•Grip® Precision Vise Vario jaws
Size Order No. Diameter Price
Vario 77 200005 pcs
Vario 125 20001
Pins damaged by collision should be replaced.
65
Makro•Grip® VarioArt.-Nr. 42102
To avoid the coolant sticking please make sure to use air to cleanthe pins after each process. It is recommended to useoccasionally multifunctional oil to assure the smooth movementof the pins.
Makro•Grip® Precison Vice Vario Accessories
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
66
Makro•Grip® Avanti
Art. Nr. 42180
Highly precise positioningon the add-on jaws due tothe patented cut surface
Improved jaw guidancerails for highest precision and parallelism
Change over of the add-on jaws in seconds with only one screw
Integrated clamping stud for pre-cise clamping in the Quick•Point® zero-point system
Add-on jaws available indifferent heights and insteel or aluminium
Makro•Grip® Precision Vice Avanti:Precise, flexible, fast – The idealclamping solution for the 6th side.
Improved centeringaccuracy ± 0.01mm
NEW !
coated,corrosion-
resistant body
67
Enormous set-up savings and best possible flexibility! Change over add-on jaws in seconds
Clamping situations can be reproduced with high repeatability due to the patented change over system of the jaws
High precision centering accuracy and parallelism
Machinable add-on jaws are perfect for parts that are difficult to clamp, which makes it ideal for the 6th side
The soft add-on jaws allow through maximum usable volume the placement of any contour, no matter if cubical, round or odd shaped
Add-on jaws can be used twice by adding contours on both sides of the jaws.
Makro•Grip® Precision Vice Avanti
Featuresand
Benefits
open... ... closed
Only one screw has to be actuated to clamp the jaw. When the milled area faces upwards the jaw is not clamped (left picture) and can be taken away. When the jaw is clamping (right picture) the diameter of the screw faces upwards.
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
68
Makro•Grip® AvantiArt. Nr. 42180
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 70 NmØ 16 mm5252 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 14000 N ± 0.01 mm
Makro•Grip® Precision Vise Avanti 77
Description/Type max. range in mm Weight in kg Order No. Price
Makro•Grip® Precision Vise Avanti 77 Base length 130 mm
15 3.7 42140
Makro•Grip® Precision Vise Avanti 77 Base length 170 mm
55 4.4 42180
Makro•Grip® Precision Vise Avanti 77 Base length 210 mm
95 5,0 42220
Makro•Grip® Precision Vice Avanti 77
Trendsetting technique for all kinds of milling tasks!
69
Shown here:Aluminum 36 mm
Soft add-on jaws for Makro•Grip® Precision Vise Avanti 77
Description/TypeHeightin mm
Weightin kg
Order No. Price
Add-on steel jaws, 1 pair 36 2.4 42776-36
Add-on steel jaws, 1 pair 56 3.8 42776-56
Add-on aluminum jaws, 1 pair 36 0.8 42777-36
Add-on aluminum jaws, 1 pair 56 1.3 42777-56
Makro•Grip® Precision Vice Avanti
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
70
Makro•Grip® Avanti
Art. Nr. 42230
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 100 NmØ 20 mm9652 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmmax. 20000 N ± 0.01 mm
Makro•Grip® Precision Vise Avanti 125
Description/Type max. range in mm Weight in kg Order No. Price
Makro•Grip® Precision Vise Avanti 125 Base length 210 mm
50 12 42230
Makro•Grip® Precision Vise Avanti 125 Base length 260 mm
100 13,9 42280
Makro•Grip® Precision Vise Avanti 125 Base length 310 mm
150 15.8 42330
Makro•Grip® Precision Vise Avanti 125 Base length 360 mm
200 17,7 42380
Makro•Grip® Precision Vice Avanti 125
The answer to your questions!
71
Makro•Grip® Precison Vice Avanti
Soft add-on jaws for Makro•Grip® Precision Vise Avanti 125
Description/TypeHeightin mm
Weightin kg
Order No. Price
Add-on steel jaws,1 pair
36 2.4 42256-36
Add-on steel jaws,1 pair
56 3.8 42256-76
Add-on aluminum jaws, 1 pair 36 0.8 42257-36
Add-on aluminum jaws, 1 pair 56 1.3 42257-76
Shown here:Steel 36 mm
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
72
Older Makro•Grip® vices (until 2006, item # 45...) have to be sent to us, so that we can recondition the guides of the base body. The one-time adjustment is necessary to make the jaws run smoothly.
Makro•Grip® gripping jaws
We recommend to always change both jaws in case of a repair, because hence the best possible centring accuracy of the jaws can be achieved!
Gripping jaws 46 mm
Description/Type Order No. Price per pair
Pair of Makro•Grip® jaws 46 47046-20
Gripping jaws 77 mm
Description/Type Order No. Price per pair
Pair of Makro•Grip® jaws 77 47077-20
Gripping jaws 125 mm
Description/Type Order No. Price per pair
Pair of Makro•Grip® jaws 125 47125-20
For the centring vice 47085 please order spare jaws with oder no. 47085-20
73
Makro•Grip® Tungsten Carbide coating
Tungsten Carbide coating for increasing friction force – for Makro•Grip® 5-Axis and dual clamping vice
Tungsten Carbide coating
For vice: Order No. Price
Makro•Grip® 46 45046-17
Makro•Grip® Dual-Vice 46 45046-15
Makro•Grip® 77 45077-17
Makro•Grip® Dual-Vice 77 45077-15
Makro•Grip® 125 45125-17
Makro•Grip® Dual-Vice 125 45125-15
Tungsten carbide coating for higher holding power of workpieces with smooth surfaces
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
74
Makro•Grip® base jaws
Base jaws for Makro•Grip®
Description/Type Weightin kg
Order No.
Price
Base jaws for Makro•Grip® 77,1 pair incl. location tenons and screws, 112x46 mm
1,5 49771
Base jaws for Makro•Grip® 125,1 pair incl. location tenons and screws, 160x57 mm
4,1 49251
Makro•Grip® 5-Axis ViseBase jaws
Matching add-on jaws can be found on pages 49 and 51.
Base jaws retrofitting kit for all Makro•Grip® 5-Axis Vise
75
Makro•Grip® Profile clamping
Profile jaws with integrated guidanceThese profile jaws are mounted integrally on the vice.Hardened guideways, soft profile block.
Sufficient steel body for optimal profile milling.
Profile jaws Makro•Grip® 5-Axis Vice
Description/TypeWeightin kg
Order No. Price
For Makro•Grip® 46Size (LxBxH): 46x21x20 mm
0,5 47469
For Makro•Grip® 77Size (LxBxH): 77x35x30 mm
1,6 47779
For Makro•Grip® 125Size (LxBxH): 125x47x40 mm
5,0 47259
Material: 16MnCr5 (soft)
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
76
Makro•Grip®
5-Achs-Spanner
Art. Nr. 47205
Makro•Grip®
5-Achs-Spanner
Art. Nr. 47205
Spindle cover plastic
Description/Type Amount Order No. Price
for Makro-Grip 77,40 x 70 mm
10 pcs.
47077-70
for Makro-Grip 125, 74 x 100 mm
47125-70
Spindle covers stop chip clogging!2 types available:
Spindle cover industrial foam
Description/Type Amount Order No. Price
for Makro-Grip 46, width 10 mm
10 pcs.
47046-80
for Makro-Grip 77,width 20 mm
47077-80
for Makro-Grip 125,width 30 mm
47125-80
Covers can be trimmed to the respective clamping range.
For serial parts:Cover that snaps into theGuideway
Foam covers are inserted in the space either side of the vice. Upon tightening the jaws, the foam is almost fully compressed returning to its original size on release.
For single or serial parts:Flexible spindle cover made of industrial foam
Makro•Grip® 5-Axis Vice Accessories
77
Makro•Grip® Applications
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
78
100mm
Makro•Grip® digital measurement workstop – precise fas tening of workpieces for finishing tasks
Quick•Point® zero-point plate with highly precise repeatability(< 0,005 mm)
Clamping lever for an individual alignment of the endstop
Digitalcalliper
Position A:Adjustment ofzero-point
Position B:Adustjustment of workpieces > 100 mm
Zero-point plate is opened/closed by pneumatic foodpedal
Makro•Grip® digital measurement workstop
Description/TypeWeightin kg
Order No. Price
Digital measurement 15,75 42000
Digital measurement workstopconnected to a usefull set-up base(colour: blue or white).Available upon request!
79
NEW !
Digital measurement workstop
Makro•Grip® digital measurement workstop – precise fas tening of workpieces for finishing tasks
Determination of the centre via gauge Setting to zero
When the workpiece is moved up against the calli-per it is laid in concentrically and now ready for the finishing task.Clamping without endstop at the workpiece!
Semi-finished workpiece moving up precisely against the endstop with its flat face. Always half the workpie-ce length is set up at the calliper. For example: Width 160 mm, calibration at the vernier: 80 mm
How it works:
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix