Bs633a data sheet
Click here to load reader
-
Upload
sanzen-enterprises -
Category
Documents
-
view
225 -
download
0
Transcript of Bs633a data sheet
BS-633A/633ATWall Mount Speaker System
DESCRIPTION
FEATURES
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
• Compact and unobtrusive design• Quick and easy installation• High cost-effectiveness• Ideally suited for BGM and announcements
APPEARANCE AND DIMENSIONAL DIAGRAM
173 (6.81”)
184
(7.2
4”)
195
(7.6
8”)
101 (3.98”)
81(3.19”)
120 (4.72”)
Fixing Hole
Bridging terminal
HOTBLK
3.3kΩ10kΩ
1.7kΩ
WHT COM WHT
5 (0.2”)
12(0.47”)
11.5
(0.4
5”)
BLK
8Ω
COM
(Transformer connection when the speaker is supplied from the factory)(Note) Use transformer terminals when changing input impedance.
173 (6.81”)
184
(7.2
4”)
195
(7.6
8”)
101 (3.98”)
81(3.19”)
120 (4.72”)
3-wire connection
Fixing Hole
BS-633AT
BS-633A
2-wire connection
Bridging terminal
N GRY
AttenuatorBLK 3.3kΩ
1.7kΩRED
WHT COM WHT
N
HOT COM
R COM
5 (0.2”)
12(0.47”)
11.5
(0.4
5”)
N
R
C
N
R
C
BLK
8Ω
C
R
(Transformer connection when the speaker is supplied from the factory)(Note) Use transformer terminals when changing input impedance.
BS-633A
BS-633AT
Architect's and Engineer's Specifications
BS-633AThe speaker shall be a 5" (12cm) cone-type speaker suitable for wall mounting. Cable connection shall be by means of a push-in connector (bridging terminal).
The speaker shall include a transformer having multiple taps (1W, 3W, 6W at 100V and 0.5W, 1.5W, 3W at 70V) adjustable. The output sound pressure level at a distance of 1m with a 1W input level applied shall be 91 dB SPL. The speaker shall have a frequency response of 120 – 15,000Hz (-20dB).
The speaker enclosure shall be constructed of ABS resin. The speaker shall be available in off-white colour. The unit shall have dimensions of 173 (W) × 195 (H) × 101 (D) mm (6.81” × 7.68” × 3.98”), and a weight of 780g (1.72 lb).
The speaker shall be a TOA model BS-633A.
BS-633ATThe speaker shall be a 5" (12cm) cone-type speaker suitable for wall mounting. Cable connection shall be by means of a push-in connector (bridging terminal).
The speaker shall include a transformer having multiple taps(3W, 6W at 100V and 1.5W, 3W at 70V) adjustable. The output sound pressure level at a distance of 1m with a 1W input level applied shall be 91 dB SPL. The speaker shall have a frequency response of 120 – 15,000Hz (-20dB). The speaker shall have a built-in attenuator, enabling it to be connected to a 2-wire and a 3-wire system.
The speaker enclosure shall be constructed of ABS resin. The speaker shall be available in off-white colour. The unit shall have dimensions of 173 (W) × 195 (H) × 101 (D) mm (6.81” × 7.68” × 3.98”) (excluding volume control) and a weight of 810 g (1.79 lb).
The speaker shall be a TOA model BS-633AT.
Polar Response
Specifications are subject to change without notice.Printed in Japan (0708) 833-52-382-60 u
TOA Corporationwww.toa.jp
60°
30°
0°
330°
300°
270°
240°
240°
180°
150°
120°
90°
10
0
-10
-20
-30
-40
-40
-30
-20
-10
0
10 4000Hz2000Hz1000Hz500Hz
SPL vs. Frequency
SPECIFICATIONSBS-633ARated Input: 6W (100V line), 3W (70V line) Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ(1W)
70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 10kΩ (0.5W)Sensitivity (1W, 1m): 91dBFrequency Response: 120 – 15,000Hz (–20dB)Speaker Component: 5" (12cm) cone-typeApplicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)
Connetion: Push-in connector (bridging terminal)Operating Temperature: –10°C to 50°C (14°F to 122°F)Finish: Case: ABS resin, off-white
Rear bord: Hard boardDimensions: 173 (W) × 195 (H) × 101 (D) mm
(6.81" × 7.68" × 3.98")Wall Mounting Case front mount: 184mm (7.24") Dimensions: Fixing hole mount: 120mm (4.72")Weight: 780g (1.72 lb)Accessory: Speaker mounting screw (4 × 35 (0.16" x 1.38")) × 2,
Speaker mounting screw (4 × 16 (0.16" x 0.63")) × 2
BS-330ATRated Input: 6W (100V line), 3W (70V line) Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W)
70V line: 1.7kΩ (3W), 3.3kΩ (1.5W)Sensitivity (1W, 1m): 91dBFrequency Response: 120 – 15,000Hz (–20dB)Speaker Component: 5" (12cm) cone-typeApplicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)
Connetion: Push-in connector (bridging terminal)Attenation Level: 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB)
6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB) Operating Temperature: –10°C to 50°C (14°F to 122°F)Finish: Case: ABS resin, off-white
Rear bord: Hard boardDimensions: 173 (W) × 195 (H) × 101 (D) mm
(6.81" × 7.68" × 3.98") (excluding volume control)Wall Mounting Case front mount: 184mm (7.24") Dimensions: Fixing hole mount: 120mm (4.72")Weight: 810g (1.79 lb)Accessory: Speaker mounting screw (4 × 35 (0.16" x 1.38")) × 2,
Speaker mounting screw (4 × 16 (0.16" x 0.63")) × 2
110
100
90
80
70
6020 50 100 500 1k 5k 10k 20k
Frequency (Hz)
SP
L (d
B)
3W1W