新弘穩工業目錄

� �

NE

W H

UN

G W

EN

NEW HUNG WEN INDUSTRIAL CO., LTD. the parent fabricating factory, founded in

1982, is the No.1 manufacturer of Paper Tube Making Machinery in Taiwan. We already

sold more than 200 sets of our competent production equipment has won very good

requtation in both Taiwan and international markets. We also have successfully created

the markets in Australia, China, Chile, Indonesia, Jordan, Malaysia, Mexico, Pakistan,

Philippines, Russia, Syria, Vietnam, and so on. In Taiwan, several biggest industrial

producers, such as Taiwan No. 1 industrial group Formosa Plastic Group, Asia Chemical

Corporation, Four Pilars Enterprise, Chin Tung Chemical Industrial are all our customers.

新弘穩工業股份有限公司，創立至今，超過200套國內外銷售紀錄，堪稱台灣第一。行

銷部門成功開創澳洲、中國、印尼、馬來西亞、菲律賓、越南、巴基斯坦、約旦、敘

利亞、墨西哥、智利、俄羅斯、南非國際市場。在台灣:南亞塑膠、亞洲化學、四維膠

帶、晉通化工等大廠；在中國:崑山金海、吳江億萬達、吳江久昇、寧波亞洲紙管等皆

是我們的顧客。

THE CORPORATION

NEW HUNG WEN

� ��

NE

W H

UN

G W

EN

HW-301B Paper Tube Winder 紙管捲管機

★ Optional equipment for production speed controlling by man-machine interface touch screen panel,

production speed can be set on the screen panel directly, length cutting precision can be ±0.5 mm.

可加裝人機介面操控，以調整生產速度，可直接於電腦設定切斷尺寸，切斷長度精準，每支長度誤

差 ±0.5mm以內。

★ Multiple-cutter model HW-301B is the image of our full machinery series.

HW-301B堪稱本公司之代表機。

★ Simultaneous cut of multiple pieces gives the much higher productivity.

多截式同時切斷提供更高生產力。

★ Main driving motor/inverter design possesses the precise speed control.

精確的主機變頻速度控制。

★ Hydraulic and chain-driven score knife gives a perfect and neat cut-off.

油壓圓切刀的平整切斷。

★ Mobile oil gear-lubricating system maintains longer working life period.

浴油式潤滑增長機器壽命週期。

WORKING SPECIFICATION 工作規格 HW-301B-L HW-301B-M HW-301B-S

Applicable I.D. of Paper Tube : 適用紙管內徑 :

φ25-150 mm φ25-150 mm φ19-77 mm

Applicable Wall Thickness : 適用紙管厚度 :

1-12 mm 1-10 mm 1-5 mm

Production Speed : 機械速度 :

1-30 M/min 1-30 M/min 1-30 M/min

Cutting Mechanism : 紙管切斷形式:

Multi-sections cutting knife (score knife)多刀同步切斷

�

HW-301D Paper Tube Winder 紙管捲管機

★ Optional equipment for production speed controlling by man-machine interface touch screen panel,

production speed can be set on the screen panel directly, length cutting precision can be ±0.5 mm.

可加裝人機介面操控，以調整生產速度，可直接於電腦設定切斷尺寸，切斷長度精準，每支長度誤

差 ±0.5mm以內。

★ HW-301D is developed for extremely large or small I.D. paper tube.

HW-301D是設計來生產超大或超小口徑的紙管。

★ Strong tungsten steel saw is equipped as an effective cutting tool.

超硬的鎢鋼圓鋸片是有效的切斷工具。

★ Big powered models bring you the special big and thick paper tube.

大馬力的重型機可生產特殊用途的厚大紙管。

★ Small-size model is also by the invertered precise speed control.

小型機亦是採用變頻速度控制及油壓捲頭調整。

★ Mobile oil gear-lubricating system maintains longer working life period.

浴油式潤滑增長機器壽命週期。

WORKING SPECIFICATION 工作規格 HW-301D-L HW-301D-M HW-301D-S


φ200-800 mm φ75-400 mm φ12-77 mm


1-20 mm 1-20 mm 1-5 mm


1-15 M/min 1-25 M/min 1-30 M/min

Saw Driving Motor : 鋸座驅動馬達 :

7.5 HP 5 HP 1 HP


Multi-sections cutting knife (Saw)鎢鋼圓鋸片切斷

�

★ Optional equipment for production speed controlling by man-machine interface touch screen panel, production speed can be set on the screen panel directly, length cutting precision can be ±0.5 mm.

可加裝人機介面操控，以調整生產速度，可直接於電腦設定切斷尺寸，切斷長度精準，每支長度誤差 ±0.5mm以內。

★ HW-301F is designed to work for the mass production of long paper tube.

HW-301F機型適用於長型紙管的大量生產。★ It is also equipped with hydraulic cutting system and winding

head adjustment. 採用油壓圓刀切斷系統及油壓捲頭間距調整。★ Main driving motor/inverter design maintains the precise speed

control. 主馬達/變頻器連結以確保穩定精確的捲頭轉速。★ Automatic unloading bracket of cut piece regularly unloads the

cut tube by photo sensor control. 獨特的自動紙管托架卸料，電眼控制卸料，使切斷的紙管易

於收集。

HW-301F Paper Tube Winder 紙管捲管機

WORKING SPECIFICATION 工作規格

HW-301F-L HW-301F-M HW-301F-S


φ25-150 mm φ25-150 mm φ19-77 mm


1-15 mm 1-12 mm 1-5 mm


1-30 M/min 1-30 M/min 1-30 M/min


Single cutting knife (score knife)單圓刀同步切斷

HW-301E Paper Tube Winding Machine 斜紋捲管機

★ This is the simplest model of our Winding machine series. 此為較簡單機種。

WORKING SPECIFICATION 工作規格

HW-301E


φ8-50 mm


1-8 mm


1-25 M/min

Main Driving Motor : 主機馬達 :

3-5 HP

Cutting Motor : 切斷馬達 :

1 or 2 HP

Cut-Off (By Tungsten Steel Saw) : 切斷裝置 (鎢鋼圓鋸片) :

1Set attached

Cluing Device & Paper Roll Hanger : 上膠裝置＆紙捲掛架 :

Relevant stories & No.

★ This model is most applicable to smaller t ube such as f i r e work.

適用小管如煙火。

★ Also can be modified by advanced Inverter speed control. 亦可採變頻器速度控制。

�

Paper Roll Stand and Gluing System紙架及上膠系統

PAPER ROLL UNWINDING STAND : 紙卷放紙架 :

Numbers of ply : 紙卷數量範圍 :

10-36 plies

Width of ply : 紙埢寬度範圍 :

40-250 mm

Max. OD of roll : 紙卷最大外徑 :

φ1,200 mm

Inner core dia : 紙卷紙管內徑 :

φ3"

Driving motor : 紙架移動馬達 :

2 or 1 HP

SD Type Single / Double Side Gluing System :SD型式單膠鍋單條紙上膠系統 :

This gluing system can choose either single side or double side gluing. It's feature is one gluing tank for one ply of paper, easy to operate and clean. The tension controller can choose either in spring or air pressure. The glue can be fed and recycled by two air pumps. The numbers of ply can be 10 to 36 ; width of ply is 40-200mm.

SD上膠系統得因應紙管製造的需要，可供選擇紙卷單面上膠或雙面

上膠，最大的特色是單張紙使用單一個上膠鍋，非常易於操作及清

洗，紙張張力可使用彈簧式或氣壓式，白膠循環使用氣壓幫浦；紙

卷數量範圍為10-36紙條，紙寬度範圍是40-200 mm。

SD Type Single / Double Side Gluing System :IG型式浸泡式上膠系統 :

This gluing system is immersion gluing system. The tension controller can choose either in spring or air pressure . Glue feeding device is used by air pump. The numbers of ply can be from 10 to 36 ; width of ply is 60-250 mm.IG上膠系統得因應紙管製造的需要，使用浸泡式上膠方式或淋瀑式上膠，紙張張力可使用彈簧式或氣壓式，白膠送

膠使用氣壓幫浦；紙卷數量範圍自10至36條紙，紙寬度範圍是60-250 mm。

RG Type Roller Gluing System :RG型式滾輪式上膠系統 :

RG gluing system is the cheapest one, but it's hard to operate while producing thick tubes. It only can use single side gluing. The tension controler is used by spring. Glue feeding device is used by air pump. The numbers of ply can be 18 and 36 ; width of ply is 40-200mm.RG上膠系統是最便宜的上膠系統，其最大的缺點是生產厚紙管時較難操作，平常以紙張單面上膠，紙張張力使用彈

簧式調整，白膠送膠使用氣壓幫浦；紙卷數量範圍自10至36條紙，紙寬度範圍是40-200mm。

�

HW-302A Slitter and Rewinder 分條複捲機

★ HW-302 series provides you a efficient device for paper converting.

高效率生產紙張的分條與複捲。

★ Score knife and shear knife can be chosen to adapt to the different paper thickness.

單雙圓刀可選配以適用不同厚度紙張。

★ Hydraulic loading system provides a better handling of paper rolls.

油壓上料系統提供更方便的操作。

★ Tension Controller ensures you the perfect tension control of unwinding.

張力控制器更精確控制放紙緊度。

WORKING SPECIFICATION 工作規格 HW-302A-L HW-301A-M HW-301A-S

Applicable Width (Jumbo Roll) : 適用紙卷寬度 :

<2,200 mm <1,600 mm <1,250 mm

Applicable O.D. (Jumbo Roll) : 適用紙卷外徑 :

<φ1,500 mm <φ1,50 mm <φ1,500 mm

Applicable Rewinding O.D. : 適用複捲外徑 :

<φ1,200 mm <φ1,200 mm <φ1,200 mm

Production Speed : 生產速度 :

10-250 M/min 10-250 M/min 10-250 M/min

Rewinding Shaft : 複捲形式 :

Double shafts雙軸複捲



Edge Position Controller : 邊緣位置控制 :

Full functioned Full functioned Full functioned

Hydraulic Jumbo Roll Loader : 油壓巨型滾輪上料 :


Jumbo Roll Tension Controller : 巨型滾輪張力控制器 :


Unloading System : 下料系統 :

Hoist (excludes) Hoist (excludes) Hoist (excludes)

�

HW-302E Slitter and Rewinder 分條複捲機

WORKING SPECIFICATION 工作規格 HW-301E-L HW-301E-M HW-301E-S HW-301E-CR

Applicable Width (Jumbo Roll) : 適用紙卷寬度 :

<2,200 mm <1,600 mm <1,250 mm <1,200 mm

Applicable O.D. (Jumbo Roll) : 適用紙卷外徑 :

<φ1,500 mm <φ1,50 mm <φ1,500 mm <φ1,500 mm

Applicable Rewinding O.D. : 適用複捲外徑 :

<φ1,200 mm <φ1,200 mm <φ1,200 mm <φ1,000 mm

Production Speed : 生產速度 :

10-250 M/min 10-250 M/min 10-250 M/min 10-350 M/min

Rewinding Shaft : 複捲形式 :

Single shaft Single shaft Single shaft Single shaft

Edge Position Controller : 邊緣位置控制 :

Full functioned Full functioned Full functioned Full functioned

Hydraulic Jumbo Roll Loader : 油壓巨型滾輪上料 :


Jumbo Roll Tension Controller : 巨型滾輪張力控制器 :


Unloading System : 下料系統 :


�

HW-303A Paper Tube Re-Cutter 紙管切管機

★ Paper Tube Re-Cutter is provided for further cutting of long paper tube.

切管機使用於長型紙管的再切段或端口的修齊。

★ Score knife cutting gives the perfect and neat cut edge of desired short tube.

圓切刀提供完全平整的切口及精確的切斷長度。

WORKING SPECIFICATION 工作規格 HW-303A-L HW-303A-M HW-303A-S


φ200-400 mm φ50-200 mm φ19-77 mm


1-20 mm 1-20 mm 1-8 mm

Applicable Parent Tube Length : 適用紙管長度 :

1,600 mm 1,600 mm 1,600 mm

Minimum Cutting Length : 最小切斷長度 :

120 mm 100 mm 100 mm

Score Cutting Knife : 切斷刀具 :

5 sets 8 sets 8 sets

10

WORKING SPECIFICATION 工作規格 HW-303B-L HW-303C-M HW-303C-S


φ25-156 mm φ12-25 mm φ12-25 mm


1-5 mm 1-5 mm 1-3 mm

Applicable Parent Tube Length : 適用紙管長度 :

600 mm 1,200 mm 800 mm

Minimum Cutting Length : 最小切斷長度 :

12 mm 100 mm 30 mm

Score Cutting Knife : 切斷刀具 :

10 sets 5 sets 5 sets

HW-303B / HW-303CPaper Tube Re-Cutter 紙管切管機

★ Air discharging of HW-303B offers higher productivity of OPP tape core.

HW-303B氣壓式退管提供高生產力的膠帶紙心成品。

11

WORKING SPECIFICATION工作規格 HW-510-G10

Applicable size range :直角板適用尺寸 :

30 x 30 mm ～ 100 x 100 mm

Applicable thickness :直角板適用厚度 :

3 ～ 10 mm

Applicable paper range :直角板適用規格 :

300 ～ 700 GMS

Production speed :直角板生產速度 :

under 5mm-25M/min ; 6~10mm-20M/min

Main driving motor :主機傳動馬達 :

71/2HP

Heater totally power :電熱器總電能 :

Hydrauic cutting machune :油壓式裁斷機 :

3 HP

Paper roll stand :紙捲放紙架 :

1set

Paper gluing system :紙張上膠系統 :

1set

Forming & hot pressing unit :熱壓成形裝置 :

2set

HW-510-G10Angular Cardboard Making Machine 直角板製造設備

24858 台灣台北縣五股鄉民義路二段43巷6號No. 6, Lane 43, Sec. 2, Min Yi Rd., Wu ku Hsiang, Taipei Hsien, TaiwanTEL : 886-2-2291-1016 FAX : 886-2-2292-2016E-mail : [email protected] : www.hung-wen.com

In Taiwan, we are the one who offer the best of not only the working reliability but

also your production efficiency and product quality.We are always committed to offering

"true quality with the right price".Why should you spend much money to get no return or

buy the cheaper but inferior machines? Come to New Hung Wen！

在台灣，我們提供您最佳的生產效率及產品品質。機器買貴了或買壞了，對您的投資

將是一大損失。值得信賴的我們將是您的最佳選擇！

新弘穩工業目錄

Documents

Transcript of 新弘穩工業目錄