Post on 29-Aug-2019
TTHHÖÖ VVIIEEÄÄNN TTRRÖÖÔÔØØNNGG ÑÑAAÏÏII HHOOÏÏCC CCOOÂÂNNGG NNGGHHIIEEÄÄPP TTPP.. HHCCMM
--------------------
SSAAÛÛNN PPHHAAÅÅMM TTRRÍÍCCHH BBAAÙÙOO TTAAÏÏPP CCHHÍÍ
KKHHOOAA HHOOÏÏCC && CCOOÂÂNNGG NNGGHHEEÄÄ
TTiieeââuu cchhuuaaåånn KKhhooaa hhooïïcc –– CCooâânngg nngghheeää
VViieeäätt NNaamm && TThheeáá ggiiôôùùii 1100//22001155
1100//22001155
hhttttpp::////lliibb..iiuuhh..eedduu..vvnn
2
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
TIÊU CHUẨN QUỐC GIA (TCVN)
CHẤT HOẠT ĐỘNG BỀ MẶT
1 TCVN 10813:2015 Chất hoạt động bề mặt. Xác định sức căng bề mặt.
Phương pháp kéo màng chất lỏng
19
2 TCVN 10814:2015 Xà phòng. Xác định độ ẩm và hàm lượng chất bay
hơi. Phương pháp sấy
7
3 TCVN 10815:2015 Xà phòng. Xác định hàm lượng chất không tan trong
etanol
7
4 TCVN 10816:2015 Chất hoạt động bề mặt. Nước sử dụng làm dung môi
cho thử nghiệm. Yêu cầu kỹ thuật và phương pháp
thử
11
5 TCVN 10817-1:2015 Chất hoạt động bề mặt. Chất tẩy rửa. Xác định hàm
lượng chất hoạt động cation. Phần 1: Chất hoạt động
cation khối lượng cao phân tử
8
6 TCVN 10817-2:2015 Chất hoạt động bề mặt. Chất tẩy rửa. Xác định hàm
lượng chất hoạt động cation. Phần 2: Chất hoạt động
cation khối lượng phân tử thấp (từ 200 đến 500)
11
7 TCVN 10818:2015 Chất hoạt động bề mặt. Đánh giá tác động tẩy rửa.
Phương pháp phân tích và thử nghiệm đối với vải đối
chứng cotton đã khử bẩn
62
8 TCVN 10819:2015 Chất hoạt động bề mặt và chất tẩy rửa. Xác định hàm
lượng nước. Phương pháp karl fischer
20
9 TCVN 10820:2015 Chất hoạt động bề mặt. Ancol và alkylphenol
ethoxylat sulfat hóa. Xác định hàm lượng chất chưa
sulfat hóa
10
TIÊU CHUẨN NƯỚC NGOÀI
CÔNG NGHỆ THÔNG TIN
10 ISO/IEC 29167-14:2015 Information technology -- Automatic identification
and data capture techniques -- Part 14: Crypto suite
35
3
AES OFB security services for air interface
communications
11 ISO/IEC 14496-22:2015
-Replace: ISO/IEC
14496-22:2009; ISO/IEC
14496-22:2009/Amd
1:2010;ISO/IEC 14496-
22:2009/Amd
2:2012;ISO/IEC 14496-
22:2009/Cor 1:2010
Information technology -- Coding of audio-visual
objects -- Part 22: Open Font Format
542
12 ISO/IEC 19776-3:2015
Replace: ISO/IEC
19776-3:2011
Information technology -- Computer graphics, image
processing and environmental data representation --
Extensible 3D (X3D) encodings -- Part 3:
Compressed binary encoding
3
13 ISO/IEC 23008-3:2015 Information technology -- High efficiency coding
and media delivery in heterogeneous environments --
Part 3: 3D audio
428
14 ISO/IEC 15444-5:2015
Replace: ISO/IEC
15444-5:2003; ISO/IEC
15444-5:2003/Amd
1:2003; ISO/IEC 15444-
5:2003/Amd 2:2015
Information technology -- JPEG 2000 image coding
system: Reference software
14
15 ISO/IEC 19778-3:2015
Replace: ISO/IEC
19778-3:2008
Information technology -- Learning, education and
training -- Collaborative technology -- Collaborative
workplace -- Part 3: Collaborative group data model
13
16 ISO/IEC 19778-2:2015
Replace: ISO/IEC
19778-2:2008
Information technology -- Learning, education and
training -- Collaborative technology -- Collaborative
workplace -- Part 2: Collaborative environment data
model
21
17 ISO/IEC 19778-1:2015
Replace: ISO/IEC
Information technology -- Learning, education and
training -- Collaborative technology -- Collaborative
35
4
19778-1:2008 workplace -- Part 1: Collaborative workplace data
model
18 ISO/IEC 19763-7:2015 Information technology -- Metamodel framework for
interoperability (MFI) -- Part 7: Metamodel for
service model registration
35
19 ISO/IEC 19763-8:2015 Information technology -- Metamodel framework for
interoperability (MFI) -- Part 8: Metamodel for role
and goal model registration
22
20 ISO/IEC TR 19763-
9:2015
Information technology -- Metamodel framework for
interoperability (MFI) -- Part 9: On demand model
selection
15
21 ISO/IEC TS 18661-
4:2015
Information Technology -- Programming languages,
their environments, and system software interfaces --
Floating-point extensions for C -- Part 4:
Supplementary functions
31
22 ISO/IEC TS 18661-
3:2015
Information Technology -- Programming languages,
their environments, and system software interfaces --
Floating-point extensions for C -- Part 3: Interchange
and extended types
58
23 ISO/IEC 24770-62:2015 Information technology -- Real-time locating system
(RTLS) device performance test methods -- Part 62:
High rate pulse repetition frequency Ultra Wide Band
(UWB) air interface
9
24 ISO/IEC 30129:2015 Information technology -- Telecommunications
bonding networks for buildings and other structures
39
25 ISO/IEC TR 29110-3-
1:2015 Replace: ISO/IEC
TR 29110-3:2011
Systems and software engineering -- Lifecycle
profiles for Very Small Entities (VSEs) -- Part 3-1:
Assessment guide
43
26 ISO/IEC TR 29110-3-
4:2015
Systems and software engineering -- Lifecycle
profiles for Very Small Entities (VSEs) -- Part 3-4:
Autonomy-based improvement method
22
5
ĐIỆN – ĐIỆN TỬ- THIẾT BỊ
27 ISO 16610-60:2015 Geometrical product specification (GPS) --
Filtration -- Part 60: Linear areal filters -- Basic
concepts
16
28 ISO 16610-30:2015
Replace: ISO/TS 16610-
30:2009
Geometrical product specifications (GPS) --
Filtration -- Part 30: Robust profile filters: Basic
concepts
14
29 ISO/IEC TR 18781:2015 Identification cards -- Laundry testing of ID Cards 4
30 ISO 23953-1:2015
Replace: ISO 23953-
1:2005; ISO 23953-
1:2005/Amd 1:2012
Refrigerated display cabinets -- Part 1: Vocabulary 18
31 IEC 62642-2-71:2015 Alarm systems - Intrusion and hold-up systems - Part
2-71: Intrusion detectors - Glass break detectors
(acoustic)
93
32 IEC 62642-2-72:2015 Alarm systems - Intrusion and hold-up systems - Part
2-72: Intrusion detectors - Glass break detectors
(passive)
89
33 IEC 62642-2-73:2015 Alarm systems - Intrusion and hold-up systems - Part
2-73: Intrusion detectors - Glass break detectors
(active)
92
34 IEC
60929:2011/AMD1:2015
Amendment 1 - AC and/or DC-supplied electronic
control gear for tubular fluorescent lamps -
Performance requirements
61
35 IEC
61770:2008/AMD1:2015
Amendment 1 - Electric appliances connected to the
water mains - Avoidance of backsiphonage and
failure of hose-sets
4
36 IEC 60335-2-
75:2012/AMD1:2015
Amendment 1 - Household and similar electrical
appliances - Safety - Part 2-75: Particular
requirements for commercial dispensing appliances
and vending machines
4
6
37 IEC 62231-1:2015 Composite station post insulators for substations with
AC voltages greater than 1 000 V up to 245 kV - Part
1: Dimensional, mechanical and electrical
characteristics
29
38 IEC 62841-2-
2:2014/COR1:2015
Corrigendum 1 - Electric motor-operated hand-held
tools, transportable tools and lawn and garden
machinery - Safety - Part 2-2: Particular requirements
for hand-held screwdrivers and impact wrenches
39 IEC 62841-2-
4:2014/COR1:2015
Corrigendum 1 - Electric motor-operated hand-held
tools, transportable tools and lawn and garden
machinery - Safety - Part 2-4: Particular requirements
for hand-held sanders and polishers other than disc
type
40 IEC 62841-2-
9:2015/COR1:2015
Corrigendum 1 - Electric motor-operated hand-held
tools, transportable tools and lawn and garden
machinery - Safety - Part 2-9: Particular requirements
for hand-held tappers and threaders
41 IEC 62841-3-
9:2014/COR1:2015
Corrigendum 1 - Electric motor-operated hand-held
tools, transportable tools and lawn and garden
machinery - Safety - Part 3-9: Particular requirements
for transportable mitre saws
42 IEC 62841-
1:2014/COR2:2015
Corrigendum 2 - Electric motor-operated hand-held
tools, transportable tools and lawn and garden
machinery - Safety - Part 1: General requirements
43 IEC 60424-3:2015 Ferrite cores - Guidelines on the limits of surface
irregularities - Part 3: ETD-cores, EER-cores, EC-
cores and E-cores
29
44 IEC 62391-1:2015 Fixed electric double-layer capacitors for use in
electric and electronic equipment - Part 1: Generic
specification
57
45 IEC 61804-4:2015 Function blocks (FB) for process control and 253
7
electronic device description language (EDDL) - Part
4: EDD interpretation
46 IEC/IEEE 62271-37-
013:2015
High-voltage switchgear and controlgear - Part 37-
013: Alternating-current generator circuit-breakers
223
47 IEC
62549:2011/ISH1:2015
Interpretation sheet 1 - Articulated systems and
flexible systems for cable guiding
48 IEC 62838:2015 LEDsi lamps for general lighting services with
supply voltages not exceeding 50 V a.c. r.m.s. or 120
V ripple free d.c. - Safety specifications
29
49 IEC 61829:2015 Photovoltaic (PV) array - On-site measurement of
current-voltage characteristics
34
50 IEC TR 62971:2015 Radiation instrumentation - Radiation sources used in
illicit trafficking detection standards - Guidance and
recommendations
12
51 IEC TS 62257-1:2015 Recommendations for renewable energy and hybrid
systems for rural electrification - Part 1: General
introduction to IEC 62257 series and rural
electrification
36
52 IEC TS 62257-12-1:2015 Recommendations for renewable energy and hybrid
systems for rural electrification - Part 12-1: Selection
of lamps and lighting appliances for off-grid
electricity systems
95
53 IEC TR 60825-17:2015 Safety of laser products - Part 17: Safety aspects for
use of passive optical components and optical cables
in high power optical fibre communication systems
17
54 IEC 61982-4:2015 Secondary batteries (except lithium) for the
propulsion of electric road vehicles - Part 4: Safety
requirements of nickel-metal hydride cells and
modules
30
55 IEC 60317-0-4:2015 Specifications for particular types of winding wires -
Part 0-4: General requirements - Glass-fibre wound,
48
8
resin or varnish impregnated, bare or enamelled
rectangular copper wire
56 IEC 60317-31:2015 Specifications for particular types of winding wires -
Part 31: Glass fibre wound, resin or varnish
impregnated, bare or enamelled rectangular copper
wire, temperature index 180
9
57 IEC 60317-32:2015 Specifications for particular types of winding wires -
Part 32: Glass fibre wound, resin or varnish
impregnated, bare or enamelled rectangular copper
wire, temperature index 155
9
58 IEC 60317-33:2015 Specifications for particular types of winding wires -
Part 33: Glass fibre wound, resin or varnish
impregnated, bare or enamelled rectangular copper
wire, temperature index 200
9
59 IEC TS 62746-3:2015 Systems interface between customer energy
management system and the power management
system - Part 3: Architecture
35
60 IEC TS 60870-5-
601:2015
Telecontrol equipment and systems - Part 5-601:
Transmission protocols - Conformance test cases for
the IEC 60870-5-101 companion standard
100
61 IEC 60691:2015 Thermal-links - Requirements and application guide 88
62 IECEE TRF 60335-2-
107:2015
This Test Report applies to: IEC 60335-2-107:2012
(First Edition) in conjunction with IEC 60335-1:2010
(Fifth Edition) incl. Corr. 1:2010 and Corr. 2:2011 +
A1:2013
120
63 IECEE TRF 60335-2-
109:2015
This Test Report applies to: IEC 60335-2-109:2010
(First Edition) + A1:2013 in conjunction with IEC
60335-1:2010 (Fifth Edition) incl. Corr. 1:2010 and
Corr. 2:2011 + A1:2013
95
64 IECEE TRF 60335-2-
11:2015
This Test Report applies to: IEC 60335-2-11: 2008
(Seventh Edition) used in conjunction with IEC
93
9
60335-1:2010 (Fifth Edition) incl. Corr. 1:2010 and
Corr. 2:2011 + A1:2013
65 IECEE TRF 60335-2-
2&10:2015
This Test Report applies to: IEC 60335-2-2:2009
(Sixth Edition) + A1:2012 & IEC 60335-2-10:2002
(Fifth Edition) + A1:2008 in conjunction with IEC
60335-1:2010 (Fifth Edition) (incl. Corrigendum
1:2010 and Corrigendum 2:2011) + A1:2013
95
66 IECEE TRF 60335-2-
58:2015
This Test Report applies to: IEC 60335-2-58:2002
(Third Edition) + A1:2008 + A2:2015 in conjunction
with IEC 60335 1:2010 (Fifth Edition) incl. Corr.
1:2010 and Corr. 2:2011 + A1:2013
94
67 IECEE TRF 60335-2-
6&102:2015
This Test Report applies to: IEC 60335-2-6 :2002
(Fifth edition) + A1:2004 + A2:2008 & IEC 60335-
2-102:2004 (First edition) + A1: 2008 in conjunction
with IEC 60335-1:2010 (Fifth Edition) ) incl. Corr.
1:2010 and Corr. 2:2011 + A1:2013
106
68 IECEE TRF 60335-2-
80:2015
This Test Report applies to: IEC 60335-2-80:2002
(Second Edition) + A1:2004 +A2:2008 in
conjunction with IEC 60335-1 2010 (Fifth Edition)
incl. Corr. 1:2010 and Corr. 2:2011 + A1:2013
90
69 IECEE TRF 60335-2-
80:2015
This Test Report applies to: IEC 60335-2-80:2015
(Third edition) in conjunction with IEC 60335-1
2010 (Fifth Edition) incl. Corr. 1:2010 and Corr.
2:2011 + A1:2013
92
70 IECEE TRF 60335-2-
9:2015
This Test Report applies to: IEC 60335-2-9:2008
(Sixth edition) +A1: 2012 in conjunction with IEC
60335-1:2010 (Fifth Edition) incl. Corr. 1:2010 and
Corr. 2:2011 + A1:2013
110
71 IEC TS 62910:2015 Utility-interconnected photovoltaic inverters - Test
procedure for low voltage ride-through
measurements
26
10
MÁY BAY - KHÔNG GIAN VŨ TRỤ
72 ISO 16682:2015 Aerospace series -- Terminology for clamping
devices
14
73 ISO 8267-1:2015
Replace: ISO 8267-
1:2005
Aircraft -- Tow bar attachment fittings interface
requirements -- Part 1: Main line aircraft
5
74 ISO 8267-2:2015
Replace: ISO 8267-
2:2005
Aircraft -- Tow bar attachment fittings interface
requirements -- Part 2: Regional aircraft
6
75 ISO/TR 18146:2015 Space systems -- Space debris mitigation design and
operation guidelines for spacecraft
50
76 ISO 12208:2015
Replace: ISO/TS
12208:2011
Space systems -- Space environment (natural and
artificial) -- Observed proton fluences over long
duration at GEO and guidelines for selection of
confidence level in statistical model of solar proton
fluences
9
77 ASTM F3060 - 15b
Revises: ASTM F3060–
15a
Standard Terminology for Aircraft 14
GIAO THÔNG - VẬN TẢI
78 ISO/TR 19639:2015 Electronic fee collection -- Investigation of EFC
standards for common payment schemes for multi-
modal transport services
35
79 ISO 5053-1:2015
Replace: ISO 5053:1987
Industrial trucks -- Terminology and classification --
Part 1: Types of industrial trucks
220
80 ISO 14817-2:2015
Replace: ISO
14817:2002
Intelligent transport systems -- ITS central data
dictionaries -- Part 2: Governance of the Central ITS
Data Concept Registry
23
81 ISO 14817-1:2015
Replace: ISO
Intelligent transport systems -- ITS central data
dictionaries -- Part 1: Requirements for ITS data
65
11
14817:2002 definitions
82 ISO/TR 24097-2:2015 Intelligent transport systems -- Using web services
(machine-machine delivery) for ITS service delivery
-- Part 2: Elaboration of interoperable web services'
interfaces
20
83 ISO 24014-1:2015
Replace: ISO 24014-
1:2007
Public transport -- Interoperable fare management
system -- Part 1: Architecture
60
84 ISO 15500-15:2015
Replace: ISO 15500-
15:2001
Road vehicles -- Compressed natural gas (CNG) fuel
system components -- Part 15: Gas-tight housing and
ventilation hose
5
85 ISO 11525-2:2015 Rough-terrain trucks -- User requirements -- Part 2:
Slewing variable-reach trucks
17
CƠ KHÍ - CHẾ TẠO
86 ISO 19235:2015 Analogue quartz clocks -- Timing accuracy 7
87 ISO 14123-1:2015
Replace: ISO 14123-
1:1998
Safety of machinery -- Reduction of risks to health
resulting from hazardous substances emitted by
machinery -- Part 1: Principles and specifications for
machinery manufacturers
9
88 IWA 15:2015 Specification and method for the determination of
performance of automated liquid handling systems
119
89 ISO 7623:2015 Replace:
ISO 7623:1996
Steel cord conveyor belts -- Cord-to-coating bond
test -- Initial test and after thermal treatment
5
90 ASTM B462 – 15
Revises: ASTM B462–
10ε2
Standard Specification for Forged or Rolled UNS
N06030, UNS N06022, UNS N06035, UNS N06200,
UNS N06059, UNS N10362, UNS N06686, UNS
N08020, UNS N08367, UNS N10276, UNS N10665,
UNS N10675, UNS N10629, UNS N08031, UNS
N06045, UNS N06025, UNS R20033 Alloy Pipe
Flanges, Forged Fittings, and Valves and Parts for
Corrosive High-Temperature Service
6
12
91 ASTM F1941/F1941M –
15 Revises: ASTM
F1941-10
Standard Specification for Electrodeposited Coatings
on Mechanical Fasteners, Inch and Metric
14
92 JIS B 8811:2015 Round slings for lifting purposes 17
93 JIS B 8818:2015 Webbing slings for lifting purposes 25
94 JIS E 4034:2011/AMD 1 Railway rolling stock parts -- Test methods of
resistibility for moisture and rainfall (Amendment 1)
1
MÁY NÔNG NGHIỆP
95 ISO 18471:2015 Agricultural irrigation equipment -- Filters --
Verification of filtration grade
7
LUYỆN KIM
96 ISO 13521:2015
Replace: ISO
13521:1999
Austenitic manganese steel castings 4
97 ISO 13520:2015
Replace: ISO
13520:2002
Determination of ferrite content in austenitic stainless
steel castings
9
98 ISO 16468:2015
Replace: ISO
16468:2005
Investment castings (steel, nickel alloys and cobalt
alloys) -- General technical requirements
12
99 ASTM ASTM
A123/A123M – 15
Revises: ASTM
A123/A123M–13
Standard Specification for Zinc (Hot-Dip
Galvanized) Coatings on Iron and Steel Products
8
100 ASTM A385/A385M –
15 Replaces: ASTM
A385/A385M–11ε1
Standard Practice for Providing High-Quality Zinc
Coatings (Hot-Dip)
9
101 ASTM A796 / A796M -
15a Revises: ASTM
A796/A796M–15
Standard Practice for Structural Design of
Corrugated Steel Pipe, Pipe-Arches, and Arches for
Storm and Sanitary Sewers and Other Buried
23
13
Applications
102 ASTM B247 – 15
Revises: ASTM B247–
09
Standard Specification for Aluminum and
Aluminum-Alloy Die Forgings, Hand Forgings, and
Rolled Ring Forgings
14
103 ASTM B247M – 15
Revises: ASTM B247–
09
Standard Specification for Aluminum and
Aluminum-Alloy Die Forgings, Hand Forgings, and
Rolled Ring Forgings (Metric)
14
104 ASTM B330 – 15
Revises: ASTM B330–
12
Standard Test Methods for Estimating Average
Particle Size of Metal Powders and Related
Compounds Using Air Permeability
105 ASTM B43 – 15
Revises: ASTM B43 –
09
Standard Specification for Seamless Red Brass Pipe,
Standard Sizes
106 ASTM B564 – 15
Revises: ASTM B564–
11ε1
Standard Specification for Nickel Alloy Forgings 9
107 ASTM B619/B619M –
15 Revises: ASTM
B619- 10ε2
Standard Specification for Welded Nickel and
Nickel-Cobalt Alloy Pipe
6
108 ASTM B66 – 15
Revises: ASTM B66–06
(Reapproved 2013)ε1
Standard Specification for Bronze Castings for Steam
Locomotive Wearing Parts
3
109 ASTM B860 – 15
Revises: ASTM B860–
13
Standard Specification for Zinc Master Alloys for
Use in Hot Dip Galvanizing
3
110 ASTM B903 – 15
Revises: ASTM B903–
10
Standard Specification for Seamless Copper Heat
Exchanger Tubes With Internal Enhancement
6
111 ASTM B99/B99M – 15
Revises: ASTM
B99/B99M–11
Standard Specification for Copper-Silicon Alloy
Wire for General Applications
3
14
112 JIS G 3441:2015 Alloy steel tubes for machine purposes 11
113 JIS G 3442:2015 Galvanized steel pipes for ordinary piping 8
114 JIS G 3478:2015 Carbon steel tubes for general machine structural
purposes
9
115 JIS G 3479:2015 Steel tuber for machine structure with specified
hardenability bands
34
116 JIS H 3250:2015 Copper and copper alloy rods and bars 34
XÂY DỰNG - VẬT LIỆU XÂY DỰNG
117 ASTM C118 – 15
Revises: ASTM C118–
11
Standard Specification for Concrete Pipe for
Irrigation or Drainage
4
118 ASTM C14 - 15a
Revises: ASTM C14–15
Standard Specification for Nonreinforced Concrete
Sewer, Storm Drain, and Culvert Pipe
5
119 ASTM C14M - 15a
Revises: ASTM C14–15
Standard Specification for Nonreinforced Concrete
Sewer, Storm Drain, and Culvert Pipe (Metric)
5
120 ASTM C1504 - 15a
Revises: ASTM C1504–
15ε1
Standard Specification for Manufacture of Precast
Reinforced Concrete Three-Sided Structures for
Culverts and Storm Drains
5
121 ASTM C1504M - 15a
Revises: ASTM C1504–
15ε1
Standard Specification for Manufacture of Precast
Reinforced Concrete Three-Sided Structures for
Culverts and Storm Drains (Metric)
5
122 ASTM C1577 - 15b
Revises: ASTM C1577–
15a
Standard Specification for Precast Reinforced
Concrete Monolithic Box Sections for Culverts,
Storm Drains, and Sewers Designed According to
AASHTO LRFD
21
123 ASTM C188 – 15
Revises: ASTM C188–
14
Standard Test Method for Density of Hydraulic
Cement
3
124 ASTM C412 – 15
Revises: ASTM C412–
Standard Specification for Concrete Drain Tile 6
15
11
125 ASTM C412M – 15
Revises: ASTM C412–
11
Standard Specification for Concrete Drain Tile
(Metric)
6
126 ASTM C497M – 15
Revises: ASTM C497–
14
Standard Test Methods for Concrete Pipe, Manhole
Sections, or Tile (Metric)
13
127 ASTM C505 – 15
Revises: ASTM C505–
11
Standard Specification for Nonreinforced Concrete
Irrigation Pipe with Rubber Gasket Joints
5
128 ASTM C505M – 15
Revises: ASTM C505–
11
Standard Specification for Nonreinforced Concrete
Irrigation Pipe With Rubber Gasket Joints (Metric)
5
129 ASTM C654 – 15
Revises: ASTM C654–
11
Standard Specification for Porous Concrete Pipe 4
130 ASTM C654M – 15
Revises: ASTM C654–
11
Standard Specification for Porous Concrete Pipe
(Metric)
4
131 ASTM C94/C94M - 15a
Revises: ASTM
C94/C94M–15
Standard Specification for Ready-Mixed Concrete 14
132 ASTM C985 – 15
Revises: ASTM C985–
13
Standard Specification for Nonreinforced Concrete
Specified Strength Culvert, Storm Drain, and Sewer
Pipe
5
133 ASTM C985M - 15a
Revises: ASTM C985–
13
Standard Specification for Nonreinforced Concrete
Specified Strength Culvert, Storm Drain, and Sewer
Pipe (Metric)
5
134 ASTM E1185 – 15
Revises: ASTM E1185–
12
Standard Guide for Selecting Economic Methods for
Evaluating Investments in Buildings and Building
Systems
5
16
135 ASTM E1121 – 15
Revises: ASTM E1121–
12
Standard Practice for Measuring Payback for
Investments in Buildings and Building Systems
9
136 ASTM E2843 – 15 Standard Specification for Demonstrating That a
Building is in Walkable Proximity to Neighborhood
Assets
4
137 ASTM D4280 – 15
Revises: ASTM D4280–
12
Standard Specification for Extended Life Type,
Nonplowable, Raised Retroreflective Pavement
Markers
12
138 JIS A 6921:2014 Wallpaper and wallcoverings for decorative finish 36
GỐM SỨ
139 ASTM C1424 – 15
Revises: ASTM C1424–
10 (Reapproved 2015)
Standard Test Method for Monotonic Compressive
Strength of Advanced Ceramics at Ambient
Temperature
13
140 ASTM C1499 – 15
Revises: ASTM C1499–
09 (Reapproved 2013)
Standard Test Method for Monotonic Equibiaxial
Flexural Strength of Advanced Ceramics at Ambient
Temperature
13
HÓA CHẤT
141 ISO 11775:2015 Surface chemical analysis -- Scanning-probe
microscopy -- Determination of cantilever normal
spring constants
24
142 ASTM D1386 – 15
Revises: ASTM D1386–
10
Standard Test Method for Acid Number (Empirical)
of Synthetic and Natural Waxes
2
143 ASTM G127 – 15
Revises: ASTM G127–
95 (Reapproved 2008)
Standard Guide for the Selection of Cleaning Agents
for Oxygen-Enriched Systems
6
144 ASTM D923 – 15
Revises: ASTM D923–
07
Standard Practices for Sampling Electrical Insulating
Liquids
14
17
145 ASTM D5837 – 15
Revises: ASTM D5837–
12
Standard Test Method for Furanic Compounds in
Electrical Insulating Liquids by High-Performance
Liquid Chromatography (HPLC)
9
146 ASTM D6786 – 15
Revises: ASTM D6786–
08
Standard Test Method for Particle Count in Mineral
Insulating Oil Using Automatic Optical Particle
Counters
3
147 JIS K 0116:2014 General rules for atomic emission spectrometry 37
148 JIS K 0127:2013 General rules for ion chormatography 35
DẦU MỎ - NHIÊN LIỆU
149 ISO/TR 12748:2015 Natural Gas -- Wet gas flow measurement in natural
gas operations
92
150 ISO 19901-1:2015
Replace: ISO 19901-
1:2005
Petroleum and natural gas industries -- Specific
requirements for offshore structures -- Part 1:
Metocean design and operating considerations
206
151 ASTM D1655 - 15dε1
Revises: ASTM D1655–
15d
Standard Specification for Aviation Turbine Fuels 20
152 ASTM D3241 – 15
Revises: ASTM D3241–
14bε1
Standard Test Method for Thermal Oxidation
Stability of Aviation Turbine Fuels
21
153 ASTM D4306 – 15
Revises: ASTM D4306–
13
Standard Practice for Aviation Fuel Sample
Containers for Tests Affected by Trace
Contamination
5
154 ASTM D7592 - 15a
Revises: ASTM D7592–
15
Standard Specification for Specification for Grade 94
Unleaded Aviation Gasoline Certification and Test
Fuel
7
155 ASTM D8004 – 15 Standard Test Method for Fuel Dilution of In-Service
Lubricants Using Surface Acoustic Wave Sensing
6
156 JIS S 2135:2013 Quick coupling unit for gas appliances 24
157 JIS S 2146:2013 Gas-cords 27
18
NHIÊN LIỆU SINH HỌC RẮN
158 ISO 18122:2015 Solid biofuels -- Determination of ash content 6
159 ISO 17829:2015 Solid Biofuels -- Determination of length and
diameter of pellets
4
160 ISO 18123:2015 Solid biofuels -- Determination of the content of
volatile matter
8
CAO SU – CHẤT DẺO
161 ISO 289-3:2015 Replace:
ISO 289-3:1999
Rubber, unvulcanized -- Determinations using a
shearing-disc viscometer -- Part 3: Determination of
the Delta Mooney value for non-pigmented, oil-
extended emulsion-polymerized SBR
3
162 ISO 13775-1:2015
Replace: ISO 13775-
1:2000
Thermoplastic tubing and hoses for automotive use --
Part 1: Non-fuel applications
13
163 ASTM D3644 – 15
Revises: ASTM D3644–
06 (Reapproved 2012)
Standard Test Method for Acid Number of Styrene-
Maleic Anhydride Resins
2
GỖ
164 ASTM F404 – 15
Revises: ASTM F404–
14a
Standard Consumer Safety Specification for High
Chairs
18
DỆT MAY
165 ASTM D123 - 15b
Revises: ASTM D123–
15a
Standard Terminology Relating to Textiles 69
166 ASTM D123 - 15b
Revises: ASTM D123–
15a
Standard Terminology Relating to Textiles 69
THUỐC LÁ
167 ISO/TS 3550-3:2015 Cigarettes -- Determination of loss of tobacco from 8
19
the ends -- Part 3: Method using a vibro-bench
VẬT LIỆU
168 ASTM C168 - 15a
Revises: ASTM C168–
15
Standard Terminology Relating to Thermal
Insulation
7
169 ASTM D3954 – 15
Revises: ASTM D3954–
94 (Reapproved 2010)
Standard Test Method for Dropping Point of Waxes 2
THỦY SẢN
170 ISO 18537:2015 Traceability of crustacean products -- Specifications
on the information to be recorded in captured
crustacean distribution chains
25
BAO GÓI
171 ISO 10718:2015
Replace: ISO
10718:2002
Cork stoppers -- Characterization of a low-in-germs
stopper, through the enumeration of colony-forming
units of yeasts, moulds and bacteria, capable of both
being extracted and growing in alcoholic medium
6
172 ISO 15378:2015
Replace: ISO
15378:2011
Primary packaging materials for medicinal products -
- Particular requirements for the application of ISO
9001:2008, with reference to Good Manufacturing
Practice (GMP)
68
Y TẾ - THIẾT BỊ Y TẾ
173 ISO 8600-1:2015
Replace: ISO 8600-
1:2013
Endoscopes -- Medical endoscopes and endotherapy
devices -- Part 1: General requirements
13
174 ISO/TS 18340:2015 Endoscopes -- Trocar pins, trocar sleeves and
endotherapy devices for use with trocar sleeves
8
175 ISO 4074:2015 Replace:
ISO 4074:2014
Natural rubber latex male condoms -- Requirements
and test methods
56
176 ASTM D3492 – 15 Standard Specification for Rubber Contraceptives 18
20
Revises: ASTM D3492–
14
(Male Condoms)
THIẾT BỊ BẢO HỘ
177 ISO 16900-10:2015 Respiratory protective devices -- Methods of test and
test equipment -- Part 10: Resistance to ignition,
flame, radiant heat and heat
19
178 ISO 16900-6:2015 Respiratory protective devices -- Methods of test and
test equipment -- Part 6: Mechanical
resistance/strength of components and connections
23
179 ISO 16900-13:2015 Respiratory protective devices -- Methods of test and
test equipment -- Part 13: RPD using regenerated
breathable gas and special application mining escape
RPD: Consolidated test for gas concentration,
temperature, humidity, work of breathing, breathing
resistance, elastance and duration
12
180 ISO 16900-9:2015 Respiratory protective devices -- Methods of test and
test equipment -- Part 9: Determination of carbon
dioxide content of the inhaled gas
18
HỆ THỐNG QUẢN LÝ
181 ISO 30302:2015 Information and documentation -- Management
systems for records -- Guidelines for implementation
30
Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông tin khoa
học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện trong
trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận thông
tin, xin vui lòng liên hệ:
1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện
sau:
+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";
+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;
+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:
vietnam.tri@gmail.com
2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM
21
Địa chỉ: 79 Trương Định - Q1 - TP.HCM
ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957
Website: www.cesti.gov.vn Email: dbtt@cesti.gov.vn
Lưu ý
1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.
2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)
Thư viện Trường Đại học Công nghiệp Thành phố H Chí Minh.