THHÖÖ ÄVVIIEENÄN ATTRRÖÖÔÔØØNN GG HÑÑAÏÏII...
Transcript of THHÖÖ ÄVVIIEENÄN ATTRRÖÖÔÔØØNN GG HÑÑAÏÏII...
TTHHÖÖ VVIIEEÄÄNN TTRRÖÖÔÔØØNNGG ÑÑAAÏÏII HHOOÏÏCC CCOOÂÂNNGG NNGGHHIIEEÄÄPP TTPP.. HHCCMM
--------------------
SSAAÛÛNN PPHHAAÅÅMM TTRRÍÍCCHH BBAAÙÙOO TTAAÏÏPP CCHHÍÍ
KKHHOOAA HHOOÏÏCC && CCOOÂÂNNGG NNGGHHEEÄÄ
TTiieeââuu cchhuuaaåånn KKhhooaa hhooïïcc –– CCooâânngg nngghheeää
VViieeäätt NNaamm && TThheeáá ggiiôôùùii 88//22001144
88//22001144
hhttttpp::////lliibb..iiuuhh..eedduu..vvnn
2
DANH MUÏC TIEÂU CHUAÅN THAÙNG 8/2014
GOÀM COÙ:
1. 81 TIÊU CHUẨN VIỆT NAM
2. 33 TIÊU CHUẨN ISO
3. 34 TIÊU CHUẨN IEC
3. 8 TIÊU CHUẨN ASTM
4. 72 TIÊU CHUẨN JIS
Bạn đọc có nhu cầu thông tin toàn văn các văn bản trong danh mục, vui lòng
email đến [email protected] gồm thông tin sau:
Họ tên – MSSV – Lớp học – Khóa học – Email – Số điện thoại liên hệ hoặc
Họ tên – MS Nhân viên/Giảng viên – Khoa/ Đơn vị công tác – Email – Số
điện thoại liên hệ.
Hoặc liên hệ qua trang web YÊU CẦU TIN của Thư viện
(http://goo.gl/PCIOC6)
Thông tin được cung cấp miễn phí và nhanh chóng cho bạn đọc Thư viện Đại
học Công nghiệp Thành phố Hồ Chí Minh.
Hân hạnh phục vụ bạn đọc
3
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
TIÊU CHUẨN/QUY CHUẨN/ĐO LƯỜNG VIỆT NAM
1 ĐLVN 263:2014 Áp kế điện tử - Quy trình kiểm định - Indicating
digital pressure gauge - Verification procedures.
9
2 ĐLVN 264:2014 Phương tiện đo độ rung động - Quy trình kiểm định -
Vibration meter - Verification procedures.
12
3 ĐLVN 258:2014 Phương tiện đo tiêu cự kính mắt - Quy trình kiểm định
- Focimeters - Verification procedures.
11
4 ĐLVN 257:2014 Phương tiện đo độ rọi - Quy trình kiểm định -
Illuminance meter - Verification procedures.
9
5 QCVN
72:2013/BGTVT
Quy chuẩn kỹ thuật quốc gia về quy phạm phân cấp và
đóng phương tiện thủy nội địa - National technical
regulation on Rule of Inland-waterway ships
Classification and Construction.
715
6 QCVN
71:2013/BGTVT
Quy chuẩn kỹ thuật quốc gia về quản lý an toàn và
ngăn ngừa ô nhiễm trong khai thác tàu biển - National
technical regulation on Management for Safe
Operation of Ships and for Pollution Prevention.
38
7 QCVN
68:2013/BGTVT
Quy chuẩn kỹ thuật quốc gia về xe đạp điện - National
technical regulation on Electric Bicycles.
12
8 QCVN
67:2013/BGTVT
Quy chuẩn kỹ thuật quốc gia về chế tạo, kiểm tra
chứng nhận thiết bị áp lực trong giao thông vận tải -
National technical regulation on Construction, Survey
and Certification of Pressure Equipments of Transport.
47
9 QCVN
65:2013/BTTTT
Quy chuẩn kỹ thuật quốc gia về thiết bị truy nhập vô
tuyến băng tần 5 GHz - National Technical regulation
on radio access equiqment operating in the 5 GHz
band.
29
10 QCVN Quy chuẩn kỹ thuật quốc gia về đánh giá năng lực cơ 73
4
65:2013/BGTVT sở chế tạo và cung cấp dịch vụ tàu biển - National
technical regulation on Assessment of Sea-going Ships
Manufacturers and Service Suppliers.
11 QCVN
64:2013/BGTVT
Quy chuẩn kỹ thuật quốc gia về đánh giá năng lực cơ
sở chế tạo và cung cấp dịch vụ tàu biển - National
technical regulation on Inspection of Sea-going Ships
Products.
73
12 QCVN
63:2013/BGTVT
Quy chuẩn kỹ thuật quốc gia về đo dung tích tàu biển -
National technical regulation on Tonnage
Measurement of Sea-going Ships.
37
13 QCVN
62:2013/BGTVT
Quy chuẩn kỹ thuật quốc gia về hệ thống lầu lái -
National technical regulation on Navigation Bridge
Systems.
28
14 QCVN
61:2013/BGTVT
Quy chuẩn kỹ thuật quốc gia về hệ thống kiểm soát và
duy trì trạng thái kỹ thuật máy tàu - National technical
regulation on Preventive Machinery Maintenance
Systems.
23
15 QCVN
56:2013/BTNMT
Quy chuẩn kỹ thuật quốc gia về tái chế dầu thải -
National Technical Regulation on Waste Oil
Recycling.
11
16 QCVN
55:2013/BTNMT
Quy chuẩn kỹ thuật quốc gia về thiết bị hấp chất thải y
tế lây nhiễm - National Technical Regulation on
Infectious Healthcare Waste Autoclave.
10
17 QCVN
54:2013/BTNMT
Quy chuẩn kỹ thuật quốc gia về ngưỡng xử lý hóa chất
bảo vệ thực vật hữu cư khó phân hủy tồn lưu theo mục
đích sử dụng đất - National Technical Regulation on
Wastewater of steel industry.
5
18 QCVN
54:2013/BGTVT
Quy chuẩn kỹ thuật quốc gia về phân cấp và đóng tàu
thủy cao tốc - National technical regulation on
Classification and Construction of High Speed Craft.
267
19 QCVN Quy chuẩn kỹ thuật quốc gia về yêu cầu an toàn chông 29
5
53:2013/BGTVT cháy của vật liệu sử dụng trong kết cấu nội thất xe cơ
giới - National technical regulation on the Burning
Behaviour of Materials Used in the Interior Structure
of Certain Categories of Motor Vehicles.
20 QCVN
52:2013/BTNMT
Quy chuẩn kỹ thuật quốc gia về nước thải công nghiệp
sản xuất thép - National Technical Regulation on
Wastewater of steel industry.
9
21 QCVN
52:2013/BTNMT
Quy chuẩn kỹ thuật quốc gia về nước thải công nghiệp
sản xuất thép - National Technical Regulation on
Wastewater of steel industry.
9
22 QCVN
48:2012/BTNMT
Quy chuẩn kỹ thuật Quốc gia về sử dụng mẫu chuẩn
được chứng nhận trong phân tích mẫu địa chất, khoáng
sản rắn - National technical regulation on the use of
certified reference materials (CRM) in analysis of
geology and minerals.
12
23 QCVN
47:2012/BTNMT
Quy chuẩn kỹ thuật Quốc gia về quan trắc thủy văn -
National technical regulation for hydrological
Observations.
39
24 QCVN
46:2012/BTNMT
Quy chuẩn kỹ thuật Quốc gia về quan trắc khí tượng -
National technical regulation on meterological
Observations.
83
25 QCVN
45:2012/BTNMT
Quy chuẩn kỹ thuật Quốc gia về giới hạn cho phép của
dioxin trong một số loại đất - National technical
regulation on allowed limits of dioxin in soils.
5
26 QCVN
18:2013/BLĐTBXH
Quy chuẩn kỹ thuật quốc gia về an toàn lao động đối
với ống thang máy thủy lực - National technical
regulation on safe work for Hydraulic lift.
9
27 QCVN 17:2014/BTC Quy chuẩn kỹ thuật quốc gia đối với muối ăn dự trữ
quốc gia - National technical regulation on state
reserve of solar salt.
15
28 QCVN Quy chuẩn kỹ thuật quốc gia về an toàn lao động đối 12
6
17:2013/BLĐTBXH với công việc hàn hơi - National technical regulation
on safe work for Oxy-fuel welding work.
29 QCVN
16:2013/BLĐTBXH
Quy chuẩn kỹ thuật quốc gia về an toàn lao động đối
với máy vận thăng - National technical regulation on
safe work for builders hoists.
11
30 QCVN
15:2013/BLĐTBXH
Quy chuẩn kỹ thuật quốc gia về an toàn lao động đối
với giày hoặc ủng cách điện - National technical
regulation on safe work for dielectric foot-wear.
6
31 QCVN 14:2014/BTC -
Thay thế:QCVN
14:2011/BTC
Quy chuẩn kỹ thuật quốc gia đối với thóc dự trữ quốc
gia - National technical regulation on paddy for state
reserve.
26
32 QCVN
14:2013/BLĐTBXH
Quy chuẩn kỹ thuật quốc gia về an toàn lao động đối
với ống cách điện có chứa bọt và sào cách điện dạng
đặc dùng để làm việc khi có điện - National technical
regulation on safe work of Insulating foam-filled tubes
and solid rods for live working.
7
33 QCVN
13:2013/BLĐTBXH
Quy chuẩn kỹ thuật quốc gia về an toàn lao động đối
với Pa Lăng điện - National technical regulation on
safe work for electrical tackle.
12
34 QCVN 13:2011/BTC Quy chuẩn kỹ thuật quốc gia về dự trữ nhà nước đối
với ô tô, xe và máy chuyên dùng - National technical
regulation on state reserve of automobiles, Special
machinery and equipments.
15
35 QCVN
12:2013/BLĐTBXH
Quy chuẩn kỹ thuật quốc gia về an toàn lao động đối
với sàn thao tác treo - National technical regulation on
safe work of suspended access equipment.
39
36 QCVN
10:2013/BKHCN
Quy chuẩn kỹ thuật Quốc gia về mạng lưới quan trắc
và cảnh báo phóng xạ môi trường quốc gia - National
technical regulation on National Environmental
Radiation Monitoring and Warning Network.
37
37 QCVN 06:2011/BTC - Quy chuẩn kỹ thuật quốc gia về dự trữ nhà nước với 15
7
Thay thế:QCVN
06:2009/BTC
gạo bảo quản kín - National technical regulation on
state reserve of rice.
38 QCVN 01-
169:2014/BNNPTNT
Quy chuẩn kỹ thuật Quốc gia về Phương pháp điều tra
phát hiện dịch hại cây rau họ hoa thập tự - National
Technical Regulation on Surveillance method of
Cruciferous vegetable pests.
12
39 QCVN 01-
168:2014/BNNPTNT
Quy chuẩn kỹ thuật Quốc gia về Phương pháp điều tra
phát hiện dịch hại trên cây lạc, đậu tương - National
Technical Regulation on Surveillance method of
Peanut and Soybean pests.
14
40 QCVN 01-
167:2014/BNNPTNT
Quy chuẩn kỹ thuật Quốc gia về Phương pháp điều tra
phát hiện dịch hại cây ngô - National Technical
Regulation on Surveillance method of Maize pests.
16
41 QCVN 01-
166:2014/BNNPTNT
Quy chuẩn kỹ thuật Quốc gia về Phương pháp điều tra
phát hiện dịch hại lúa - National Technical Regulation
on Surveillance method of Rice pests.
23
42 QCVN 01-
165:2014/BNNPTNT
Quy chuẩn kỹ thuật Quốc gia về quy trình giám định
cỏ ma ký sinh thuộc chi Striga là dịch hại kiểm dịch
thực vật của Việt Nam - National Technical
Regulation on Procedure for identification of Witch
weeds (Striga genus) - Plant quarantine pests of Viet
Nam.
15
43 QCVN 01-
119:2012/BNNPTNT
Quy chuẩn kỹ thuật quốc gia về Phương pháp điều tra
phát hiện sinh vật hại trên cây ăn quả có múi -
National technical regulation on Surveillance method
of citrus pests.
14
44 QCVN 01-
118:2012/BNNPTNT
Quy chuẩn kỹ thuật quốc gia về Phương pháp điều tra
phát hiện sinh vật chính gây hại cây chè - National
technical regulation on Surveillance method of tea
pests.
14
45 QCVN 01- Quy chuẩn kỹ thuật quốc gia về quy trình xử lý vật thể 14
8
117:2012/BNNPTNT thuộc diện kiểm dịch thực vật bằng biện pháp chiếu xạ
- National technical regulation on treatment procedure
for regulated articles by irradiation measures.
46 QCVN 01-
116:2012/BNNPTNT
Quy chuẩn kỹ thuật quốc gia về quy trình xử lý nhện
nhỏ hại trên giống cây trồng nhập khẩu trồng trong
khu cách ly kiểm dịch thực vật - National technical
regulation on procedure for Phytophagous mite of
imported plant varieties in isolated quarantine area.
10
47 QCVN 01-
115:2012/BNNPTNT
Quy chuẩn kỹ thuật quốc gia về quy trình xử lý quả
tươi bằng hơi nước nóng trừ ruồi đục quả - National
technical regulation on treatment procedure for fresh
fruit by vapor heat to eradicate fruit flies.
11
48 QCVN 01-
114:2012/BNNPTNT
Quy chuẩn kỹ thuật quốc gia về quy trình xử lý cây
xanh, cành ghép, mắt ghép trong kiểm dịch thực vật -
National technical regulation on Fumigation procedure
for plants, cutting, budwood varieties in plant
quarantine.
10
49 QCVN 01-
113:2012/BNNPTNT
Quy chuẩn kỹ thuật quốc gia về quy trình kiểm dịch
cây quả hạnh nhập khẩu trong khu cách ly kiểm dịch
thực vật - National technical regulation on
Phytosanitary procedure for imported stone fruit tree
varieties in isolated quarantine area.
10
50 QCVN 01-
112:2012/BNNPTNT
Quy chuẩn kỹ thuật quốc gia về phương pháp xử lý
nhà kính, nhà lưới sử dụng trong công tác kiểm dịch
thực vật - National technical regulation on treatment
procedure for greenhouses and screenhouses using in
plant quarantine.
6
51 QCVN 01-
111:2012/BNNPTNT
Quy chuẩn kỹ thuật quốc gia về quy trình điều tra
giám sát rệp sáp hại giống cây trồng nhập khẩu và biện
pháp xử lý - National technical regulation on
procedure for surveillance, monitoring and treatment
of scale insects associated with imported plant
8
9
varieties.
52 QCVN 01-
110:2012/BNNPTNT
Quy chuẩn kỹ thuật quốc gia về quy trình giám định
nhóm ruồi đục quả thuộc giống Ceratitis là dịch hại
kiểm dịch thực vật Việt Nam - National technical
regulation on Procedure for identification of fruit fly
species belong to Ceratitis genus - Plant quarantine
pests of Viet Nam.
10
53 QCVN 01-
109:2012/BNNPTNT
Quy chuẩn kỹ thuật quốc gia về quy trình giám định
nhóm ruồi đục quả thuộc giống Bactrocera là dịch hại
kiểm dịch thực vật Việt Nam - National technical
regulation on Procedure for identification of fruit fly
species belong to Bactrocera genus - Plant quarantine
pests of Viet Nam.
11
54 QCVN 01-
108:2012/BNNPTNT
Quy chuẩn kỹ thuật quốc gia về quy trình giám định
nhóm ruồi đục quả thuộc giống Anastrepha là dịch hại
kiểm dịch thực vật Việt Nam - National technical
regulation on Procedure for identification of fruit fly
species belong to Anastrepha genus - Plant quarantine
pests of Viet Nam.
10
55 QCVN 01-
107:2012/BNNPTNT
Quy chuẩn kỹ thuật quốc gia về quy trình giám định
mọt thóc (Sitophilus granarius Linnaeus) - National
technical regulation on Procedure for identification of
grain weevil (Sitophilus granarius Linnaeus).
8
56 QCVN 01-
106:2012/BNNPTNT
Quy chuẩn kỹ thuật quốc gia về quy trình giám định
mọt to vòi [Caulophilus oryzae (Gyllenhal)] - National
technical regulation on Procedure for identification of
broad-nosed grain weevil [Caulophilus oryzae
(Gyllenhal)].
8
57 QCVN 01-
105:2012/BNNPTNT
Quy chuẩn kỹ thuật quốc gia về quy trình giám định
mọt cứng đốt (Trogoderma granarium everts) và mọt
da vệt thận (Trogoderma inclusum LeConte) -
National technical regulation on Procedure for
15
10
identification of khapra beetle (Trogoderma granarium
everts) and larger cabinet beetle (Trogoderma
inclusum LeConte).
58 QCVN 01:2014/BTC Quy chuẩn kỹ thuật quốc gia về An toàn trong sản xuất
thuốc nổ công nghiệp bằng thiết bị di động - National
technical regulation on safety in the manufacturing of
industrial explosives by mobile equipments.
10
59 TCVN 8248:2013 -
Thay thế:TCVN
8248:2009
Ba lát điện từ dùng cho bóng đèn huỳnh quang. Hiệu
suất năng lượng - Electromagnetic ballasts for
fluorescent lamps. Energy efficiency.
7
60 TCVN 7897:2013 -
Thay thế:TCVN
7897:2008
Balát điện tử dùng cho bóng đèn huỳnh quang. Hiệu
suất năng lượng - Electronic ballasts for fluorescent
lamps. Energy efficiency.
7
61 TCVN 10303:2014 Bê tông - Kiểm tra và đánh giá cường độ chịu nén -
Concrete - Control and assessment of compressive
strength.
18
62 TCVN 4601:2012 -
Thay thế:TCVN
4601:1988
Công sở cơ quan hành chính nhà nước - Yêu cầu thiết
kế - Office buildings - Design requirements.
33
63 TCVN 4603:2012 -
Thay thế:TCVN
4603:1988
Công trình thể thao - Yêu cầu sử dụng và bảo quản -
Sporting facilities - Requirements for use and
keeping.
21
64 TCVN 4529-2012 -
Thay thế:TCVN
4529:1988
Công trình thể thao - Nhà thể thao - Tiêu chuẩn thiết
kế - Sporting facilities - Sport building - Design
standard.
33
65 TCVN 4260-2012 -
Thay thế:TCVN
4260:1986
Công trình thể thao - Bể bơi - Tiêu chuẩn thiết kế -
Sporting faccilities - Swimming pools - Design
standard.
45
66 TCVN 4205-2012 -
Thay thế:TCVN
4605:1986
Công trình thể thao - Sân thể thao - Tiêu chuẩn thiết kế
- Sporting facilities - Stadium - Design standard.
63
11
67 TCVN 7540-2:2013 -
Thay thế:TCVN 7540-
2:2005
Động cơ điện không đồng bộ ba pha roto lồng sóc .
Phần 2: Phương pháp xác định hiệu suất năng lượng -
Three-phase asynchronous squirrel cage electrical
motors. Part 2: Methods for determination of energy
efficiency.
8
68 TCVN 7540-1:2013 -
Thay thế:TCVN 7540-
1:2005
Động cơ điện không đồng bộ ba pha roto lồng sóc.
Phần 1: Hiệu suất năng lượng - Three-phase
asynchronous squirrel cage electrical motors. Part 1:
Energy efficiency.
11
69 TCVN 7203:2009 -
Thay thế:TCVN
7203:2002
Mã số mã vạch vật phẩm. Yêu cầu kiểm tra xác nhận
chất lượng mã vạch - Article number and bar code. Bar
code quality verifying requirements.
16
70 TCVN 6756:2009 -
Thay thế:TCVN
6756:2000
Mã số mã vạch vật phẩm - Mã số mã vạch GS1 cho
sách và nhà xuất bản phẩm nhiều kỳ. Yêu cầu kỹ thuật
- Article number and barcode - GS1 number and
barcode for book and serial – Specification.
22
71 TCVN 6384:2009 -
Thay thế:TCVN
6384:1998
Mã số vật phẩm - Mã số thương phẩm toàn cầu 12 chữ
số (GTIN-12) nhiều kỳ - Yêu cầu kỹ thuật - Article
number - The global trade Item number of 12-digit
(GTIN-12) – Specification.
11
72 TCVN 10304:2014 Móng cọc - Tiêu chuẩn thiết kế - Pile Foundation -
Design Standard.
86
73 TCVN 4319:2012 -
Thay thế:TCVN
4319:1986
Nhà và công trình công cộng - Nguyên tắc cơ bản để
thiết kế - Public Buildings - Basic rules for design.
30
74 TCVN 9365-2012 Nhà văn hóa thể thao - Nguyên tắc cơ bản để thiết kế -
Building for sports-culture - Basic principles for
design.
20
75 TCVN 9409-5:2014 Vật liệu chống thấm - Tấm CPE - Phương pháp thử -
Phần 5: Xác định độ bền trong môi trường hóa chất -
Waterproofing materials - CPE (chlorinated
3
12
polyethylene) sheeting - Test methods - Part 5:
Determination chemical resistance.
76 TCVN 9409-4:2014 Vật liệu chống thấm - Tấm CPE - Phương pháp thử -
Phần 4: Xác định độ bền trong môi trường vi sinh -
Waterproofing materials - CPE (chlorinated
polyethylene) sheeting - Test methods - Part 4:
Determination of microorganism resistance (soil
burial).
3
77 TCVN 9409-3:2014 Vật liệu chống thấm - Tấm CPE - Phương pháp thử -
Phần 3: Xác định tỷ lệ thay đổi khối lượng ở 70 độ C -
Waterproofing materials - CPE (chlorinated
polyethylene) sheeting - Test methods - Part 3: Test
method for volatile loss at 70oC.
3
78 TCVN 9409-2:2014 Vật liệu chống thấm - Tấm CPE - Phương pháp thử -
Phần 2: Xác định độ bền bóc tách của mối dán -
Waterproofing materials - CPE (chlorinated
polyethylene) sheeting - Test methods - Part 2:
Determination of peel resistance of adhesives.
4
79 TCVN 9409-1:2014 Vật liệu chống thấm - Tấm CPE - Phương pháp thử -
Phần 1: Xác định độ dày - Waterproofing materials -
CPE (chlorinated polyethylene) sheeting - Test
methods - Part 1: Determination of thickness.
7
80 TCVN 9408:2014 Vật liệu chống thấm - Tấm CPE - Yêu cầu kỹ thuật -
Waterproofing materials - CPE (chlorinated
polyethylene) sheeting – Specifications.
12
81 TCVN 9407:2014 Vật liệu chống thấm. Băng chặn nước PVC -
Waterproofing materials. Polyvinylchloride waterstop.
13
TIÊU CHUẨN ISO
82 ISO 21573-1:2014 -
Replace: ISO 21573-
1:2006
Building construction machinery and equipment --
Concrete pumps -- Part 1: Terminology and
commercial specifications.
21
13
83 ISO/TR 15686-11:2014 Buildings and constructed assets -- Service life
planning -- Part 11: Terminology.
27
84 ISO 10081-4:2014 -
Replace: ISO 10081-
4:2007
Classification of dense shaped refractory products --
Part 4: Special products.
11
85 ISO 16715:2014 Cranes -- Hand signals used with cranes. 8
86 ISO 15841:2014 -
Replace: ISO
15841:2006
Dentistry -- Wires for use in orthodontics. 10
87 ISO/TS 17383:2014 Determination of the triacylglycerol composition of
fats and oils -- Determination by capillary gas
chromatography.
13
88 ISO 24504:2014 Ergonomics -- Accessible design -- Sound pressure
levels of spoken announcements for products and
public address systems.
21
89 ISO/TR 12468-3:2014 External exposure of roofs to fire -- Part 3:
Commentary.
90 ISO/TR 19244:2014 Guidance on transition periods for standards
developed by ISO/TC 84 -- Devices for administration
of medicinal products and catheters.
3
91 ISO/IEC 7811-2:2014 -
Replace: ISO/IEC
7811-2:2001
Identification cards -- Recording technique -- Part 2:
Magnetic stripe -- Low coercivity.
20
92 ISO 14708-1:2014 -
Replace: ISO 14708-
1:2000
Implants for surgery -- Active implantable medical
devices -- Part 1: General requirements for safety,
marking and for information to be provided by the
manufacturer.
57
93 ISO 6185-3:2014 -
Replace: ISO 6185-
3:2001
Inflatable boats -- Part 3: Boats with a hull length less
than 8 m with a motor rating of 15 kW and greater.
30
94 ISO 28560-3:2014 - Information and documentation -- RFID in libraries --
24
14
Replace: ISO 28560-
3:2011
Part 3: Fixed length encoding.
95 ISO/IEC 29167-1:2014
- Replace: ISO/IEC
29167-1:2012
Information technology -- Automatic identification
and data capture techniques -- Part 1: Security services
for RFID air interfaces.
10
96 ISO/IEC 8484:2014 -
Replace: ISO/IEC
8484:2007
Information technology -- Magnetic stripes on
savingsbooks.
16
97 ISO/IEC 9834-8:2014 -
Replace: ISO/IEC
9834-8:2008
Information technology -- Procedures for the operation
of object identifier registration authorities -- Part 8:
Generation of universally unique identifiers (UUIDs)
and their use in object identifiers.
23
98 ISO/IEC 24771:2014 -
Replace: ISO/IEC
24771:2009
Information technology -- Telecommunications and
information exchange between systems -- MAC/PHY
standard for ad hoc wireless network to support QoS in
an industrial work environment.
155
99 ISO 4490:2014 -
Replace: ISO
4490:2008
Metallic powders -- Determination of flow rate by
means of a calibrated funnel (Hall flowmeter).
4
100 ISO 4074:2014 -
Replace: ISO
4074:2002; ISO
4074:2002/Cor 1:2003;
ISO 4074:2002/Cor
2:2008
Natural rubber latex male condoms -- Requirements
and test methods.
57
101 ISO 11979-2:2014 -
Replace: ISO 11979-
2:1999; ISO 11979-
2:1999/Cor 1:2003
Ophthalmic implants -- Intraocular lenses -- Part 2:
Optical properties and test methods.
22
102 ISO 17123-1:2014 Optics and optical instruments -- Field procedures for
testing geodetic and surveying instruments -- Part 1:
Theory.
7
15
103 ISO 2758:2014 -
Replace: ISO
2758:2001
Paper -- Determination of bursting strength. 12
104 ISO 5630-7:2014 Paper and board -- Accelerated ageing -- Part 7:
Exposure to light.
6
105 ISO 8029:2014 -
Replace: ISO
8029:2007
Plastics hose -- General-purpose collapsible water
hose, textile-reinforced – Specification.
16
106 ISO 3994:2014 -
Replace: ISO
3994:2007
Plastics hoses -- Helical-thermoplastic-reinforced
thermoplastics hoses for suction and discharge of
aqueous materials – Specification.
15
107 ISO/TS 18571:2014 -
Replace: ISO 17123-
1:2010
Road vehicles -- Objective rating metric for non-
ambiguous signals.
39
108 ISO 8330:2014 -
Replace: ISO
8330:2007
Rubber and plastics hoses and hose assemblies –
Vocabulary.
20
109 ISO 23551-6:2014 Safety and control devices for gas burners and gas-
burning appliances -- Particular requirements -- Part 6:
Thermoelectric flame supervision controls.
18
110 ISO 8124-6:2014 Safety of toys -- Part 6: Certain phthalate esters in toys
and children's products.
27
111 ISO 9453:2014 -
Replace: ISO
9453:2006
Soft solder alloys -- Chemical compositions and
forms.
16
112 ISO 13095:2014 Surface Chemical Analysis -- Atomic force
microscopy -- Procedure for in situ characterization of
AFM probe shank profile used for nanostructure
measurement.
25
113 ISO/IEC TR 29110-5-
6-2:2014
Systems and software engineering -- Lifecycle profiles
for Very Small Entities (VSEs) -- Part 5-6-2: Systems
engineering -- Management and engineering guide:
58
16
Generic profile group: Basic profile.
114 ISO/TS 16530-2:2014 Well integrity -- Part 2: Well integrity for the
operational phase.
87
TIÊU CHUẨN IEC
115 IEC 61158-3-
12 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 3-12: Data-link layer service
definition - Type 12 elements.
87
116 IEC 61158-3-
14 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 3-14: Data-link layer service
definition - Type 14 elements.
45
117 IEC 61158-3-
19 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 3-19: Data-link layer service
definition - Type 19 elements.
49
118 IEC 61158-4-
2 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 4-2: Data-link layer protocol
specification - Type 2 elements.
711
119 IEC 61158-4-
3 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 4-3: Data-link layer protocol
specificationn - Type 3 elements.
353
120 IEC 61158-4-
11 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 4-11: Data-link layer protocol
specificationn - Type 11 elements.
330
121 IEC 61158-4-
12 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 4-12: Data-link layer protocol
specification - Type 12 elements.
299
122 IEC 61158-4-
14 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 4-14: Data-link layer protocol
specificationn - Type 14 elements.
97
123 IEC 61158-4-
19 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 4-19: Data-link layer protocol
934
17
specification - Type 19 elements.
124 IEC 61158-5-
2 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 5-2: Application layer service
definition - Type 2 element.
429
125 IEC 61158-5-
3 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 5-3: Application layer service
definition - Type 3 elements.
893
126 IEC 61158-5-
10 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 5-10: Application layer service
definition - Type 10 elements.
1244
127 IEC 61158-5-
12 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 5-12: Application layer service
definition - Type 12 elements.
267
128 IEC 61158-5-
14 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 5-14: Application layer service
definition - Type 14 elements.
200
129 IEC 61158-5-
19 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 5-19: Application layer service
definition - Type 19 elements.
69
130 IEC 61158-5-
20 ed3.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 5-20: Application layer service
definition - Type 20 elements.
114
131 IEC 61158-3-
1 ed2.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 3-1: Data-link layer service
definition - Type 1 elements.
272
132 IEC 61158-3-
2 ed2.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 3-2: Data-lonk layer service
definition - Type 2 elements.
94
133 IEC 61158-3-
3 ed2.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 3-3: Data-link layer service
141
18
definition - Type 3 elements.
134 IEC 61158-3-
4 ed2.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 3-4: Data-link layer service
definition - Type 4 elements.
51
135 IEC 61158-3-
13 ed2.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 3-13: Data link layer service
definition - Type 13 elements.
91
136 IEC 61158-3-
22 ed2.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 3-22: Data-link layer service
definition - Type 22 elements.
75
137 IEC 61158-4-
1 ed2.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 4-1: Data-link layer protocol
specification - Type 1 elements.
858
138 IEC 61158-4-
4 ed2.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 4-4: Data-link layer protocol
specificationn - Type 4 elements.
97
139 IEC 61158-4-
13 ed2.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 4-13: Data-link layer protocol
specificationn - Type 13 elements.
169
140 IEC 61158-4-
22 ed2.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 4-22: Data-link layer protocol
specificationn - Type 22 elements.
138
141 IEC 61158-5-
4 ed2.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 5-4: Application layer service
definition - Type 4 elements.
147
142 IEC 61158-5-
5 ed2.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 5-5: Application layer service
definition - Type 5 elements.
631
143 IEC 61158-5-
9 ed2.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 5-9: Application layer service
247
19
definition - Type 9 elements.
144 IEC 61158-5-
13 ed2.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 5-13: Application layer service
definition - Type 13 elements.
119
145 IEC 61158-3-
20 ed1.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 3-20: Data-link layer service
definition - Type 20 elements.
54
146 IEC 61158-3-
24 ed1.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 3-24: Data-link layer service
definition - Type 24 elements.
76
147 IEC 61158-4-
20 ed1.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 4-20: Data-link layer protocol
specification - Type 20 elements.
90
148 IEC 61158-4-
24 ed1.0 (2014-08)
Industrial communication networks - Fieldbus
specifications - Part 4-24: Data-link layer protocol
specification - Type 24 elements.
238
TIÊU CHUẨN ASTM
149 ASTM F1767 Standard Guide for Forms Used for Search and
Rescue.
85
150 ASTM D7641 Standard Guide for Textile Fibers has been reapproved
(with editorial change).
13
151 ASTM D6300 Standard Practice for Determination of Precision and
Bias Data for Use in Test Methods for Petroleum
Products and Lubricants.
41
152 ASTM F3080 Standard Practice for Laser Technologies for
Measurement of Cross-Sectional Shape of Pipeline
and Conduit by Non-Rotating Laser Projector and
CCTV Camera System.
6
153 ASTM F2200 Standard Specification for Automated Vehicular Gate
Construction.
4
20
154 ASTM C219 Standard Terminology Relating to Hydraulic Cement. 4
155 ASTM D7946 Standard Test Method for Initial pH #40;i-pH#41;-
Value of Petroleum Products.
5
156 ASTM D7691 Standard Test Method for Multielement Analysis of
Crude Oils Using Inductively Coupled Plasma Atomic
Emission Spectrometry #40;ICP-AES#41.
9
TIÊU CHUẨN JIS
157 JIS C 3342:2012 -
Replace:JIS C
3342:2000
600 V polyvinyl chloride insulated and sheathed
cables.
14
158 JIS K 8039:2012 -
Replace:JIS K
8039:2004
Acetonnitrile for pesticide residue and polychlorinated
biphenyl analysis (Reagent).
7
159 JIS D 2608-2012 -
Replace:JIS D 2608-
1998
Automotive parts - Rubber boots for hydraulic brake
wheel cylinders using a non-petroleum base hydraulic
brake fluid.
33
160 JIS B 1192:2013 -
Replace:JIS B
1192:1997
Ball screws. 44
161 JIS B 1193-2:2013 -
Replace:một phần -
JIS B 1193:2004
Ball splines -- Part 2: Dynamic and static load ratings
and rating life.
7
162 JIS B 1193-1:2013 -
Replace:một phần -
JIS B 1193:2004
Ball splines. Part 1: General characteristics and
requirements.
22
163 JIS B 2352:2013 -
Replace:JIS B
2352:2005
Bellows type expansion joints. 76
164 JIS B 1860:2013 Belt drives -- V-belts and V-ribbed belts, and
corresponding grooved pulleys -- Vocabulary.
10
21
165 JIS B 2011:2011/AMD
2
Bronze, gate, globe, angle, and check valves
(Amendment 2).
1
166 JIS B 9212-2012 -
Replace:JIS B 9212-
2001
Bush cutter saws. 12
167 JIS B 2239:2013 -
Replace:JIS B
2239:2004
Cast iron pipe flanges. 23
168 JIS C 8461-1:2012 -
Replace:JIS C 8461-
1:2005
Conduit systems. Part 1: General requirements. 37
169 JIS A 0101:2012 -
Replace:JIS A
0101:2003
Construction drawings for civil engineering. 63
170 JIS A
6205:2013/AMD1
Corrosion inhibitor for reinforcing steel in concrete
(Amendment 1).
1
171 JIS K
6769:2013/AMD3
Crosslinked polyethylene (PE-X) pipes (Amendment
3).
1
172 JIS K 8357:2004 -
Replace:JIS K
8357:2004
Diethyl ether for pesticide residue and polychlorinated
biphenyl analysis (Reagent).
8
173 JIS B 2706:2013 -
Replace:JIS B
2706:2001
Disc springs. 18
174 JIS A 8340-5:2012 -
Replace:JIS A 8340-
5:2005
Earth-moving machinery. Safety. Part 5: Requirements
for dumpers.
23
175 JIS A 8340-4:2011 -
Replace: JIS A 8340-
4:2004
Earth-moving machinery. Safety. Part 4: Requirements
for hydraulic excavators.
50
22
176 JIS A 8340-3:2012 -
Replace: JIS A 8304-
3:2007
Earth-moving machinery -- Safety -- Part 3:
Requirements for loaders.
30
177 JIS A 8340-2:2012 -
Replace:JIS A 8304-
2:2007
Earth-moving machinery -- Safety -- Part 2:
Requirements for bulldozers.
14
178 JIS A 8340-1:2011 -
Replace:JIS A 8304-
1:2004
Earth-moving machinery -- Safety -- Part 1: General
requirements.
74
179 JIS K 8093:2012 -
Replace:JIS K
8093:2004
Ethanol (99.5) for pesticide residue and
polychlorinated biphenyl analysis (Reagent).
7
180 JIS K 8110:2012 -
Replace:JIS K
8110:2004
Ethyl acetate for pesticide residue and polychlorinated
biphenyl analysis (Reagent).
8
181 JIS B 0143:2013 -
Replace:JIS B
0143:1985
Fasteners -- Bolts, screws, studs and nuts -- Symbols
and descriptions of dimensions.
19
182 JIS B 2061:2013 -
Replace:JIS B
2061:2011
Faucets, ball taps and flush valves (Amendment 1). 53
183 JIS C 5201-1:2011 -
Replace:JIS C 5201-
1:1998
Fixed resistors for use in electronic equipment -- Part
1: Generic specification.
109
184 JIS Z 3320:2012 -
Replace:JIS Z 3320-
2007
Flux cored wires for gas shielded and self-shielded
metal arc welding of atmospheric corrosion resisting
steel.
19
185 JIS K 0124:2011 -
Replace:JIS K
0124:2002
General rules for high performance liquid
chromatography.
55
23
186 JIS C 5860:2012 General rules of passive devices for light beam
transmission.
7
187 JIS C 8960:2012 -
Replace:JIS C
8960:2004
Glossary of terms for photovoltaic power generation. 41
188 JIS B 0100:2013 -
Replace:JIS B
0100:1984
Glossary of terms for valves. 89
189 JIS B 1812:2013 Glossary of terms relating to chains, sprockets and
accessories.
58
190 JIS A 6206:2013 -
Replace: JIS A
6206:2008
Ground granulated blast-furnace slag for concrete. 2
191 JIS K 8825:2004 -
Replace:JIS K
8825:2004
Hexane for pesticide residue and polychlorinated
biphenyl analysis (Reagent).
8
192 JIS B 7024-2012 -
Replace:JIS B
7024:1994
Horology - Magnetic resistant watches - Classification
and performance.
9
193 JIS B 0217-1:2013 -
Replace:JIS B
0217:1980
ISO metric trapezoidal screw threads -- Tolerances --
Part 1: Principles and basic data.
16
194 JIS B 6228-2:2012 Machine tools - Test conditions for bridge-type milling
machines - Testing of the accuracy - Part 2: Travelling
bridge (gantry-type) machines.
42
195 JIS B 2051:2013 -
Replace:JIS B
2051:1994
Malleable iron and ductile iron valves. 32
196 JIS K 0081:2012 Method for determination of boron in flue gas. 21
197 JIS Z 2351:2011 - Method for evaluating electronic characteristics of 46
24
Replace:JIS Z
2351:1992
ultrasonic test instruments.
198 JIS K 0104:2011 -
Replace:JIS K
0104:2000
Methods for determination of nitrogen oxides in flue
gas.
48
199 JIS C 6575-
2:2013/AMD1
Miniature fuses -- Part 2: Cartridge fuse-links
(Amendment 1).
4
200 JIS C 6575-
1:2013/AMD 1
Miniature fuses -- Part 1: Definitions of miniature
fuses and general requirements for miniature fuse-
links (Amendment 1).
2
201 JIS C 8121-1:2011 -
Replace:JIS C 8121-
1:2005
Miscellaneous lampholders -- Part 1: General
requirements and tests.
36
202 JIS K 2202:2012 -
Replace:JIS K
2202:2007
Motor gasoline. 6
203 JIS Z 2305:2013 -
Replace:JIS Z
2305:2001
Non-destructive testing. Qualification and certification
of NDT personnel.
36
204 JIS Z 4930:2011 -
Replace:JIS Z
4930:2005
Phantoms for performance evaluation of X-ray bone
densitometer.
20
205 JIS C 1604:2013 -
Replace:JIS C
1604:1997
Platinum resistance thermometers. 44
206 JIS K 6774:2013 -
Replace:JIS K
6774:2005
Polyethylene pipes for the supply of gaseous fuels. 66
207 JIS P 8121-2:2012 -
Replace:một phần- JIS
Pulps - Determination Of Drainability - Part 2:
"Canadian Standard" freeness method.
18
25
P 8121:1995
208 JIS P 8121-1:2012 -
Replace:một phần -
JIS P 8121:1995
Pulps - Determination Of Drainability - Part 1:
Schopper-riegler Method.
17
209 JIS C 2254:2011 -
Replace:JIS C
2254:2004
Rigid mica materials for electric heating equipment. 6
210 JIS B 1539:2013 -
Replace:JIS B
1539:1993
Rolling bearings -- Self-aligning thrust roller bearings. 8
211 JIS B 1534:2013 -
Replace:JIS B
1534:1993
Rolling bearings -- Tapered roller bearings. 18
212 JIS B 1533:2013 -
Replace:JIS B
1533:1993
Rolling bearings. Cylindrical roller bearings. 23
213 JIS B 2402-5:2013 -
Replace:JIS B 2402-
5:2002
Rotary shaft lip-type seals incorporating elastomeric
sealing elements -- Part 5: Identification of visual
imperfections.
10
214 JIS B 2402-3:2013 -
Replace:JIS B 2402-
3:2002
Rotary shaft lip-type seals incorporating elastomeric
sealing elements -- Part 3: Storage, handling and
installation
10
215 JIS B 2402-1:2013 -
Replace:JIS B 2402-
1:2002
Rotary shaft lip-type seals incorporating elastomeric
sealing elements -- Part 1: Nominal dimensions and
tolerances.
16
216 JIS K 6349:2012 -
Replace:JIS K 6349-
1:1999, JIS K 6349-
2:1999, JIS K 6349-
3:1999
Rubber hoses -- Wire- or textile-reinforced single-
pressure types for hydraulic applications.
19
26
217 JIS B 0101:2013 -
Replace: JIS B
0101:1994
Screw threads and fasteners – Vocabulary. 54
218 JIS B 1186:2013 -
Replace:JIS B
1186:2007
Sets of high strength hexagon bolt, hexagon nut and
plain washers for friction grip joints.
16
219 JIS C 7523-2012 -
Replace:JIS C
7523:2000
Small incandescant lamps for household use. 23
220 JIS B 0217-2:2013 -
Replace:JIS B
0218:1980
SO metric trapezoidal screw threads -- Tolerances --
Part 2: Limits of sizes for external and internal screw
thread.
20
221 JIS Q 22301:2013 Societal security -- Business continuity management
systems – Requirements.
31
222 JIS Q 22300:2013 Societal security. Terminology. 12
223 JIS B 2808:2013 -
Replace:JIS B
2808:2005
Spring pins. 21
224 JIS B 2308:2013 Stainless steel threaded fittings. 30
225 JIS L 1041:2011 -
Replace:JIS L 1041-
2000
Test methods for resin finished textiles. 65
226 JIS C 5933:2012 -
Replace:JIS C
5933:1993, JIS C
5873:1992
Test methods of optical isolators. 12
227 JIS L 1057-2012 Testing methods for dimensional change by ironing of
woven and knitted fabrics.
4
228 JIS H
8200:2013/AMD1
Thermal spraying terms (Amendment 1). 3
27
229 JIS C
6691:2013/AMD1
Thermal-links - Requirements and application guide
(Amendment 1).
3
230 JIS T 3216:2013 -
Replace:JIS T
3216:2011
Tubes and catheters for nephrostomy and cystostomy. 13
231 JIS B 0102-2:2013 -
Replace:một phần -
JIS B 0102:1999
Vocabulary of gear terms -- Part 2: Definitions related
to worm gear geometry.
16
232 JIS B 0102-1:2013 -
Replace: một phần -
JIS B 0102:1999
Vocabulary of gear terms -- Part 1: Definitions related
to geometry.
67
233 JIS Z 3410:2013 -
Replace:JIS Z
3410:1999
Welding coordination -- Tasks and responsibilities. 9
Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông
tin khoa học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện
trong trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận
thông tin, xin vui lòng liên hệ:
1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện
sau:
+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";
+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;
+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:
2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM
Địa chỉ: 79 Trương Định - Q1 - TP.HCM
ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957
Website: www.cesti.gov.vn Email: [email protected]
Lưu ý
1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.
2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)
Thư viện Trường Đại học Công nghiệp Thành phố H Chí Minh.