Post on 14-Jul-2015
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 1/35
K.U.S Holdings (S) Pte Ltd
14 Senoko Loop Singapore 758150
T: +65 6770 2222 F: +65 6770 2233
www.kus.com.sg
K.U.S Group of Companies:
Singapore
K.U.S Pre-cast (S) Pte Ltd
K.U.S Scaff olding Pte Ltd
HINO Metalform Pte Ltd
Malaysia
KUS Pre-cast Concrete (M) Sdn Bhd
KUS Building Supplies Sdn Bhd
Philippines
KUS Formworks Group, Inc.
K.U.S Architectural Components, Inc.
Architectural
K.U.S Holdings (S) Pte Ltd
P.426C P.445C P.648C S otUV
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 2/35
K.U.S Holdings (S) Pte Ltd
14 Senoko Loop Singapore 758150
We’re making ways to serve you better
HDB-Centre of Building Research (CBR)
Exhibit Hall - Booth Slot 20A10 Woodlands Ave., Singapore 738973
With our fexible manuacturing capabilities, we oer product customization as per customer’s specication. Thistype o customer service we oer becomes an iterative act o co-creation and co-design between us and our
customers in meeting their specic requirements, with reasonable prices and sure quality.
We are privileged to be one o HDB’s exhibitors or Product Exhibit at Centre o Building Research (CBR), and we
would like to invite you to come and visit our booths located at;
I you wish to come individually or in a group, our Sales Team will be glad to assist you. Please contact usanytime at Tel.-(65) 6770 2222 or Email us at sales@kus.com.sg and we will arrange the schedule at your
most convenient time.
“All inormation stated in this catalogue is subject to change without prior notice”
81010_KUS arch_II_8.ai 42 1/12/11 12:13 PM81010_KUS arch_II_8.ai 42 1/12/11 12:13 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 3/35
K.U.S Holdings (S) Pte Ltd was established in 1999 to meet the growing demand or building materials. Marked
or its unwavering value o service, quality products and wide range o collections, the signifcant presence o thecompany strongly elt not only in its mother base –Singapore, but also in International markets, making K.U.S a
major distributor o building materials in South East Asia.
K.U.S is predominantly known or its specialization in Architectural fnishing, specifcally or masonry, plastering,
screeding and tiling.
Aside being a certifed ISO 9001, another milestone that K.U.S achieved was having the bizSAFE star certifcate.
This certifcation motivates us to conduct risk assessment in key areas that involved saety and health o the
workers, and as such, we’re able to create series o Method Statements or Architectural Products. These Method
Statements serves as a work procedure and saety measures when applying K.U.S’s products and it’s being
urnished to customers or easing their work in disseminating instructions to the workers. Another achievement
that has been awarded to K.U.S is the Green Label Certifcate, it’s a recognition given by Singapore Environment
Council (SEC) or producing eco-riendly and sustainable building products.
Keeping our strength in the market, we have invested a laboratory with testing machines or our Quality Control
Management. Through our experienced and dedicated Quality Control Team, K.U.S’s Architectural products goes
through a process o quality inspection to ensure that what we deliver to the customer is in accordance to the
company standard which tantamount to customer satisaction.
Being an enterprise that is customer ocus, K.U.S is continuously expanding its product lines by developing
the architectural fnishing collection. Through innovation with advanced technology, we’ve launched 3 new
collections that were frst ever introduced in the market. Aside its individual uniqueness, it’s also user-riendly,
time-saving and cost eective. The frst series o collections are Stainless Steel and Brass Divider Strips. These
items are used to control or to relieve stress between two dierent oor coverings. It has adjustable anges
that allow the height to be exible to address dierent ooring, leaving a result with an elegant look fnished.
Another series are the PVC Square and Stainless Steel tile trims. The Stainless Steel comes with square and round
shapes, while the PVC square has variety o colors to choose rom. Made rom high quality PVC materials and
corrosion resistance, these tile trims are distinctively designed or edge protection and decorative purposes
in wall and oor trimmings. The third new series is our latest PVC recycled and PVC Green products that are
made rom hazardous ree polyvinyl materials. These recycled and green products are cautiously produced to
maintain its superior quality and versatility or plastering works e.g drywall, concrete/stucco, screeding and
tiling. As an organization that is environmentally conscious, we understand what begets chemical sensitivity,
energy eciency and environmental impact o products, thereore in our pursuit toward going green, K.U.S is
dedicated to oer a wide range o eco-riendly products or sustainable living.
As K.U.S progresses into the new era o sustainable construction initiated by the Singapore government, we are
poised or new responsibilities in search or new products to achieve better customer satisaction by bringing in
excellent service and competitive quality products.
Finally, as a responsible corporate citizen, our advocacy to society osters a commitment o providing assistance
to indigent communities by partnering with civil society groups and government institutions. K.U.S commitment
in practicing corporate social responsibility gives us a deeper sense o ulfllment. Having this kind o projects, it
stimulates our devotion to serve beyond our duties and by making ourselves involved, we are able to help and
create a dierence in society.
Our organization is committed to providing innovative, quality and competitive building materials to meet the
growing demand o construction requirements. We will strive to uphold a reputation o being a leader in giving
total customer satisaction while creating maximum value or our employees and society.
We will widen urther our horizon through regional expansion in Asia, while continuously providing a broader
range o excellent products and unprecedented value o service both or local and international markets.
81010_KUS arch_II_8.ai 1 12/31/10 12:06 PM81010_KUS arch_II_8.ai 1 12/31/10 12:06 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 4/35
We understand the needs o our customers thereore we strive to ofer price-competitive products without
compromising the quality. We have a system o control that sustains the good quality o all our products and
our experienced quality control team are taking steps to make sure that each item are thoroughly inspected
and are o suciently high quality to meet or exceed customer requirements beore we serve it.
We value our customers and we do whatever it takes to give them “Total Customer Satisaction”. To meet the
customers growing demand, we make it a point to keep sucient stock at any given time. Our 45,000 square
eet warehouse with vertical system approximately 1,000 pallets storage area is ideal enough to minimize
out-o-stock incidents. With just-in-time delivery concept, we also commit maximum eforts to ensure that
orders arrive at customer’s premises without any delay. Our service does not end ater customer purchased,
we treat ater-sales service almost as important as the initial purchase. We want our customers to eel happy
that they did business with us and eel assured that someone is available to help i the need arises. Our way
o customer service beore, during and ater-sales is consistently paramount.
To keep in pace with time and to give our customer proessional, speedy and quality services, we develop our
staf by consistently updating their knowledge and skills through proper training. Our dedicated sales and
support teams are actively on-call at your utmost disposal.
Continuous improvement and successul utilization o new ideas or betterment is what innovation is or us. We
try hard to give only the best or our customers and by being never satised with what we have it motivates us
to urther improve our methods, products and services.
81010_KUS arch_II_8.ai 2 12/31/10 11:59 AM81010_KUS arch_II_8.ai 2 12/31/10 11:59 AM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 5/35
.
We are moving towards Green
No new method of application is required asthe green products have the identical shape
and application compare to the normal PVC
products.
The product is made from
minimum 50% recycled content
What is Green Building? The concept o green building envisions a new approach to create structure that is sustainable
and with healthy building environment using materials that are resource-efcient and environmentally riendly.
As a corporate global citizen, K.U.S is taking pro-active measures in preventing negative environmental impact by way
o undertaking its daily business operations with a mindset o 4R – Reduce, Re-use, Recycle & Recover and by producing
products that are eco-riendly. As a sign o recognition or our eorts in producing green products, the Singapore
Economic Council has awarded us the Green label Certicate. This certication entails that our green products would
be a contributing actor to developers, architects & contractors or achieving a Green Mark Building.
With a state o the art technology our Green PVC Products has been cautiously produced to maintain its superior quality
and versatility, hence, its characteristics will bring orth greater value with a long term benets to our customers and to
the environment.
Eco-friendly, hence reduce
potential environmental
impact.
No prohibited and hazardous substances
detected under test requirement of
Singapore Green Label Scheme (SGLS).
81010_KUS arch_II_8.ai 3 12/31/10 12:07 PM81010_KUS arch_II_8.ai 3 12/31/10 12:07 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 6/35
Table of Contents
Bricklaying WorksBrick/Plastering Mesh
Coil Mesh
Lintel Bracket
HD Lintel Bracket
U-Lintel
Corrugated Lintel
Bonding Bar
Hold Fast (Galvanized)
Hold Fast (Mild Steel)
Frame Tie
Brick Tie
Plastering WorksCorner Bead
Inner Bead
Drip Line
Plaster Stop
Groove Joint
Plaster Adaptor
Wall Paneling WorksAngle Bar
Locking Plate
U Bracket
Footing Bracket
Tiling Works Tile Trims
Stainless Steel and Brass Strips
Divider Strips
Tile Adaptor
Screeding WorksControl Joint
Drywall Installation WorksAngle Bead
Inner Bead
Z Bead
L Bead
Casing Bead
Drywall Control Joint
Self-Adhesive Fibermesh
Protective MaterialsProtective Sheet
Protective guard
Other AccessoriesGrouting Hand Pump
Concrete Nail
Nylon Twine
1-5
6-13
14-15
16-20
21
22-27
28
29
81010_KUS arch_II_8.ai 4 1/12/11 11:02 AM81010_KUS arch_II_8.ai 4 1/12/11 11:02 AM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 7/35
Brick/Plastering MeshTechnical Specifcation
Finish Galvanized
Thickness (mm) 0.3 /0.5/ 0.7
Tensile Strength (N/mm ) 351
Elongaon (%) 35
Galvanized Coang (g/m ) 64
2
2
Item Descriptions Length Packaging
500pcs/box
500pcs/box
500pcs/box
500pcs/box
500pcs/box
500pcs/box
500pcs/box
500pcs/box
500pcs/box
5 coils/bundle
1200mm
1200mm
1200mm
1200mm
1200mm
1200mm
1200mm
1200mm
1200mm
17m
BPM-65
BPM-100
BPM-150
BPM-200
BPM-300
PM-100
PM-150
PM-200
PM-300
Coil Mesh-65
Brick/Plastering Mesh
Width Length
BPM-65 65mm 1200mm 38mm 16mm
BPM-100 100mm 1200mm 38mm 16mm
BPM-150 150mm 1200mm 38mm 16mm
BPM-200 200mm 1200mm 38mm 16mm
BPM-300 300mm 1200mm 38mm 16mm
PM-100 100mm 1200mm 21mm 10mm
PM-150 150mm 1200mm 21mm 10mm
PM-200 200mm 1200mm 21mm 10mm
PM-300 300mm 1200mm 21mm 10mm
Coil Mesh 65mm 17m 38mm 16mm
A B
A
B
BRICK/PLASTERING MESH
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Bricklaying Works
Brick Mesh is an essential reinorcement component or masonry work to minimize crack due to stresses, vibration
and thermal movement o the brick wall. It is commonly applied in bricklaying and plastering works especially atbrick layers, junction between brick and concrete, joint between dissimilar materials and areas along the line o
stress.
In order to suit various areas o application, we supply optional diferent gauges and diferent mesh openings. By
having galvanized nish, it also provides good corrosion resistance while applying in wet areas like brick and
plastering works.
COIL MESH
1
81010_KUS arch_II_8.ai 6 1/17/11 11:53 AM81010_KUS arch_II_8.ai 6 1/17/11 11:53 AM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 8/35
Lintel
LINTEL BRACKET
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
K.U.S’s Lintel is a lightweight galvanized steel component bent to shape to be accommodated with brick wall and
ranging rom lower to higher capacity with the increment o fange height and thickness. It is specically designed
to support brickwork above window and door openings in replacement to conventional concrete lintel. As the
component is light in weight and has a high load bearing capacity, it is easy to install and construction speed can
be increased. Since the product nish is galvanized, it urther improves corrosion resistance.
In order to avoid mistakes by using the wrong lintel, we have introduced dierent kinds o perorated shapes or
easy recognition.
As additional perks, we can assist you to do the load calculation ree o charge, likewise we can propose the right
model to use that suits your specic requirements.
K.U.S’s Lintel Bracket is designed to be mounted on structural wall or column where there is no bearing area or
lintel to rest on. It also comes with two dierent sizes o punched holes or optional asteners to be tted. We also
supply HD Lintel Bracket or structural purpose use.
Bricklaying Works
HD LINTEL BRACKET
Item Descriptions Packaging
50pcs/box
10pcs/box
10pcs/box
L-Bracket
HD L-Bracket 50
HD L-Bracket 75
Technical Specifcation
Finish
Thickness (mm)
Tensile strength (N/mm )
Maximum load @5mm eccentric from vercal plane(kN)
Elongaon (%)
L-Bracket HD L-Bracket
Galvanized
3 10
435
20.3 31.4
33.5
440
28
2
2
81010_KUS arch_II_8.ai 7 1/17/11 11:54 AM81010_KUS arch_II_8.ai 7 1/17/11 11:54 AM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 9/35
CORRUGATED LINTEL
U-LINTEL
LintelTechnical Specifcation
CL-100 UL-103 UL-103A UL-103B UL-103C UL-103D
Finish Galvanized
Height (mm) 25 50 75 75 75 100
Thickness (mm) 0.8 1.6 1.6 2.0 2.6 2.6
Width (mm) 100 103 103 103 103 103
Length (mm) 1000 to 4000 with 100mm increment
Yield strength (N/mm ) 221
Tensile strength (N/mm ) 329Elongaon (%) 41
Galvanized (g/m ) N.A 53
Uniformly distributed load at l/360
deflecon (N/m)613 1607 2333 3225 4972 22396
Perforated shape on flange N.A Circle Diamond Circle Rectangle Circle
Lintel
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Bricklaying Works
2
2
2
3
81010_KUS arch_II_8.ai 8 1/17/11 11:54 AM81010_KUS arch_II_8.ai 8 1/17/11 11:54 AM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 10/35
HOLD FAST (Mild Steel)
HOLD FAST (Galvanized)
BONDING BAR
Bonding Bar 400 75
Bonding Bar 400 100
Bonding Bar 400 150
Bonding Bar 400 300
A B
A
A
B
B
Bonding Bar 800 75
Bonding Bar 800 100
Bonding Bar 800 150
Bonding Bar 800 300
A B
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Bonding Bar & Hold Fast Bricklaying Works
K.U.S’s Bonding Bar are made o hot dipped galvanized steel and used at joint connection between brick wall and
concrete member so as to minimize crack along the joints. It has been tested and the results has well exceededBCA’s requirements o hot dipped galvanization with minimum average coating mass o 460 g/m or equivalent
thickness o 64 microns in accordance with BS EN 1461. Lipped Frame also provides greater fexibility in positioning
the Bonding Bars to acilitate brick-laying. The Bonding Bar should be installed at every 4th course o the brick
layers.
Hold Fasts are widely used where there are two dierent materials required to join together such as the joint
between concrete or timber structure and brick wall. Nowadays, many contractors preerred to use Hold Fasts as
they are easy to install and also time saving compare to conventional way o cast-in column.
K.U.S’s Frame Tie and Brick Tie are made o galvanized steel which comes with perorated and corrugated shapes
or good bonding strength. These Ties are normally installed vertically at every 4th course o the brick wall to
provide a connection between brick wall and structural member, transer load and restrain the dierential material
movement.
B
4
2
81010_KUS arch_II_8.ai 9 1/17/11 11:55 AM81010_KUS arch_II_8.ai 9 1/17/11 11:55 AM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 11/35
Technical Specifcation
Finish
Tensile Strength (N/mm )
Elongaon (%)
Zinc coang (g/m )
Brick Tie/Frame Tie Bonding Bar Hold Fast
Galvanized
365
38
460
385
29
7.8
340
33.5
53
2
2
FRAME TIE
Item Descriptions Packaging
500pcs/box
500pcs/box
100pcs/box
5pcs/bundle
Brick Tie
Frame Tie
Hold Fast (Galvanized/Mild Steel)
Bonding Bar
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Frame Tie & Brick Tie Bricklaying Works
Galvanized Galvanized/Self-color
BRICK TIE
5
81010_KUS arch_II_8.ai 10 1/17/11 11:56 AM81010_KUS arch_II_8.ai 10 1/17/11 11:56 AM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 12/35
CRV-1
CRV -1 1 20 20
CRV -2 2 20 20
CRV -3 3 20 20
A B C
A
B
C
CRL
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
K.U.S’s corner bead reinorces exterior stucco or plaster corners with durable, straight and rust ree vinyl corners. Our
vinyl corner beads are specially manuactured with striation and peroration along the fanges, which provide positivebonding o stucco to the product and substrates which they are attached. These become part o the building structure
and move along with the walls. However, these do not reely express their coecient o expansion or contraction.
K.U.S’s corner beads are available in 3 main versions: sharp edge or ne corners, smooth edge or contemporaneous
corners and bull-nose edge or sot corners.
The other version o corner beads (CRL series) can perorm multiple unctions such as angle constrained by narrow
corners, walls with acute and obtuse angle and various curves to most o the construction radiuses.
Corner Bead Plastering Works
CRV-4
CRV -4 4 20 20
CRV -5 5 18 27
CRV -10 10 18 18
A B C
A
B
C
6
81010_KUS arch_II_8.ai 12 1/17/11 11:58 AM81010_KUS arch_II_8.ai 12 1/17/11 11:58 AM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 13/35
A
B
C
Corner BeadTechnical Specifcation
Mean Tensile Strength (MPa) 27.2
Mean Flexural Strength @5% Strain (MPa) 66.8
Mean Deflecon Temperature ( C) 60.1
Mean Vicat Soening Temperature ( C) 80.9
Chemical Resistance No colour changed and visual defects
CRV-3S
Item Descriptions Length Packaging
100pcs/box
100pcs/box100pcs/box
100pcs/box
100pcs/box
100pcs/box
100pcs/box
100pcs/box
200pcs/box
2.0m
2.2m2.2m
2.0m
2.0m
2.0m
2.0m
2.0m
2.2m
CRV-1 W/R/G
CRV-2 W/R/GCRV-3 W/R/G
CRV-3SW/R/G
CRV-4 W/R/G
CRV-4SW/R/G
CRV-5 W/R/G
CRV-10W/R/G
CRV-2SW/R/G
CRV -3S 4 15 28
CRV -4S 5 20 20
A B C
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Corner Bead Plastering Works
7
Original Material
Recycled Material
Green Material
W
R
G
81010_KUS arch_II_8.ai 13 1/17/11 11:59 AM81010_KUS arch_II_8.ai 13 1/17/11 11:59 AM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 14/35
Inner Bead
Item Descriptions Length Packaging
200pcs/box
100pcs/box
3.0m
3.0m
IB-7 W/R/G
IBR-16 W/R/G
27.2
66.8
60.1
80.9
No colour changed and visual defects
Inner BeadTechnical Specifcation
IB-7
IBR-16
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Plastering Works
90° internal corners are usually the most difcult alignment aspect during wall plastering, as such we developed
the Inner Bead to counter this problem. Due to its aligning characteristics, the Inner Bead was designed to give aperect 90° internal corner even though the wall does not meet perectly at the corner. With K.U.S Inner Bead, it
makes the work easier and more efcient, thus it saves time and money.
8
Original Material
Recycled Material
Green Material
W
R
G
Mean Tensile Strength(MPa)
Mean Flexural Strength @5% Strain(MPa)
Mean Deflecon Temperature( C)
Mean Vicat Soening Temperature( C)
Chemical Resistance
81010_KUS arch_II_8.ai 14 1/17/11 12:00 PM81010_KUS arch_II_8.ai 14 1/17/11 12:00 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 15/35
Drip Line
Drip LineTechnical Specifcation
Mean Tensile Strength (MPa) 27.2
Mean Flexural Strength @5% Strain (MPa) 66.8
Mean Deflecon Temperature ( C) 60.1
Mean Vicat Soening Temperature ( C) 80.9
Chemical Resistance No colour changed and visual defects
Item Descriptions Length Packaging
100pcs/box
50pcs/boxDL-1310
DL-2010
2.0m
2.0m
A
B
DRIP LINE
DL-1310 13 20
DL-2010 20 20
A B
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Plastering Works
K.U.S has ingeniously integrated the Corner Bead and Drip Line functionalities into a single product. As a result, both
straight corner and groove for drip line can be achieved in a single plastering procedure. To cater for broader rangeof applications, we specially designed our Drip Line in 2 sizes, one for the window ledge (DL-1310) which has a
shorter distance between the window frame and the edge and the other size is catered for normal ledge.
Our Drip Line was produced with a Benzotriazole, an ultra
violet (UV) resistance chemical additive that gives protection
from discoloration.
9
81010_KUS arch_II_8.ai 15 1/17/11 12:00 PM81010_KUS arch_II_8.ai 15 1/17/11 12:00 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 16/35
PLASTER STOP
Plaster Stop
Item Descriptions Length Packaging
200pcs/box
100pcs/box
100pcs/box
100pcs/box
50pcs/box
2.45m
2.45m
2.45m
2.45m
2.45m
PS-6 W/R/G
PS-10W/R/G
PS-12W/R/G
PS-15 W/R/G
PS-35W/R/G
Plaster StopTechnical Specifcation
Mean Tensile Strength (MPa) 27.2
Mean Flexural Strength @5% Strain (MPa) 66.8
Mean Deflecon Temperature ( C) 60.1
Mean Vicat Soening Temperature ( C) 80.9
Chemical Resistance No colour changed and visual defects
PLASTER STOP(Horizontal Application)
A
B
D
C
PLASTER STOP
(Vertical Application)
PS-6 6 6 11 17
PS-10 10 10 12 22PS-12 11 12 18 30
PS-15 15 15 20 35
PS-35 15 35 20 55
A B C D
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Plastering Works
In the construction industry context, Plaster Stop was derived rom its ability to terminate plaster or stucco works.
K.U.S’s series o Plaster Stops ranging rom 6mm, 10mm, 12mm, 15mm and 35mm reveals to create skirting along
the wall, groove on the ceiling, window and door jambs as well as addressing the juncture o dissimilar materials.
The specially designed L-shape angle edge trims (without back fange) are to provide better alignment to the
intersections during installation. Whereas vinyl itsel is not re hazardous, thereore it does not support combustion
once fame source is removed. In addition, vinyl products solve related problems like static electricity, electrolysis,
rust, oxidation, excessive dents or kinks and damages in transit or on the job site.
10
Original Material
Recycled Material
Green Material
W
R
G
81010_KUS arch_II_8.ai 16 1/17/11 12:00 PM81010_KUS arch_II_8.ai 16 1/17/11 12:00 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 17/35
Groove Joint
A
B
D
C
GV-10 6 10 14 4
GV-15 10 15 19 5
GV-20 10 20 25 11
GV-30 10 30 35 21
A B C
GU-Series
GV-Series
A
B
C
A B C
GU-0905 5 9 18
GU-1605 5 16 25
GU-1609 9 16 25
GU-2010 10 20 30
GU-5010 10 50 63
D
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
K.U.S’s groove joints are used to provide distinctive architectural pleasing break on any stucco wall surace. Chamered
and vaulted reveals are an improvement over standard U shape stucco reveals. These ofer a new and more appealing
look not only to the design aspect but also improve mechanism or stucco embedment. Furthermore, this will
enhance the bond between the stucco and the joints to reduce separation at these locations.
Plastering Works
Since Groove Joints are normally used at areas which are
exposed directly to sunlight, we have added a Benzotriazole,
an ultra violet (UV) resistance chemical additive that gives
protection rom discoloration.
11
81010_KUS arch_II_8.ai 17 1/17/11 12:01 PM81010_KUS arch_II_8.ai 17 1/17/11 12:01 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 18/35
Groove JointTechnical Specifcation
Mean Tensile Strength (MPa) 26.2
Mean Flexural Strength @5% Strain (MPa) 66.9
Mean Deflecon Temperature ( C) 60.0
Mean Vicat Soening Temperature ( C) 79.5
Chemical Resistance No colour changed and visual defects
Item Descriptions Length Packaging
200pcs/box
100pcs/box
100pcs/box100pcs/box
200pcs/box
200pcs/box
100pcs/box
100pcs/box
50pcs/box
100pcs/box
100pcs/box
2.0m
2.0m
2.0m
2.0m
2.0m
2.0m
2.0m
2.0m
2.0m
2.0m
2.0m
GV-10
GV-15
GV-20
GV-30
GU-0905
GU-1605
GU-1609
GU-2010
GU-5010
GC-25
GC-30
A
B
C
A B C
GC-25 10 25 33 13.5
GC-30 10 30 38 13.5
Groove Joint
GC-Series
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Plastering Works
D
D
12
81010_KUS arch_II_8.ai 18 1/17/11 12:01 PM81010_KUS arch_II_8.ai 18 1/17/11 12:01 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 19/35
Plaster Adaptor
PLASTER ADAPTOR
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
K.U.S’s Plaster Adaptor is made o polyvinyl chloride and is a useul mechanism to orm circular shape and help to
produce good fnishing when it comes to plastering o household shelter ventilation sleeve. It was also designed in
ull accordance to HDB’s specifcations.
Plastering Works
270
55
84
3.1
14.3
Plaster AdaptorTechnical Specifcation
Tensile Strength(kg/cm )
Elongaon (%)
Heat Distoron Temperature ( C)
Melt Index (g/10 min)
Izod Impact Strength (kg.cm/cm)
2
13
81010_KUS arch_II_8.ai 19 1/17/11 12:04 PM81010_KUS arch_II_8.ai 19 1/17/11 12:04 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 20/35
Wall Paneling Works
Locking Plate
U Bracket
LOCKING PLATE
U BRACKET
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
The three essential accessories in the assembling o light weight partition wall are Angle Bar, Locking Plate and
U-Bracket which are made o steel bent to shape.
Angle Bar is designed to be secured to the structural soft slab with anchor bolt and locked in the groove provided
by the light weight partition wall and Locking Plate is designed to be secured to two adjacent walls with bolt & nut.
For U-Bracket, it is designed to secure both side by side light weight partition walls and the rebar running vertically
at the end side o the partition wall so that lled up wall like brick or concrete block wall can be securely connected
by welding hold ast to the rebar. Footing Bar is designed to be secured at the connection between oor and light
weight partition wall which is not erected in ull oor height (reer to the picture).
K.U.S has it all to provide one stop shop in lightweight partition wall panel installation or alignment securing the
adjoining panels and astening o re-bar with welded hold asts.
ANGLE BAR
14
81010_KUS arch_II_8.ai 21 1/17/11 12:04 PM81010_KUS arch_II_8.ai 21 1/17/11 12:04 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 21/35
Technical Specifcation
Angle Bar , Locking Plate, U-Bracket & Footing Bracket
Self-color
340
33.5
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Wall Paneling Works
Item Descriptions Packaging
100pcs/box
50pcs/box
50pcs/box
50pcs/box
50pcs/box
Angle Bar 150mm
Angle Bar 300mm
Locking Plate
U-Bracket
Foong Bracket
2
FOOT BAR
15
FOOTING BRACKET
Finish
Tensile Strength (N/mm )
Elongaon (%)
81010_KUS arch_II_8.ai 22 1/17/11 12:05 PM81010_KUS arch_II_8.ai 22 1/17/11 12:05 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 22/35
STAINLESS STEEL
ROUND TILE TRIM
PVC ROUND TILE TRIM
A B C
TT-09 9 15 27
TT-12 12 17 29
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Tile Trims Tiling Works
Tile is a non-homogeneous material, thus unable to chamer of neatly at the 90 degree corner. K.U.S’s Tile Trim is
specially designed to provide smooth chamering at the corners. It comes in numerous color selections to either
blend into your tile’s color theme or to maniest a contracting periphery.
Apart rom the conventional round shape PVC tile trim, K.U.S has newly developed the PVC square and rst ever
Stainless Steel wrapped PVC tile trims which comes with grade 304 and 316 in round and square shapes. The stainless
steel surace enhances the parameter o tile wall, projecting a stylish and elegant trimming nished.
A
B
C
A
B
C
16
A B C
TT-09(SS) 9 15 28
TT-12(SS) 12 17 28
81010_KUS arch_II_8.ai 24 1/17/11 12:05 PM81010_KUS arch_II_8.ai 24 1/17/11 12:05 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 23/35
PVC SQUARE TILE TRIM
(PVC) (Stainless Steel)Technical Specifcation
Mean Tensile Strength (MPa) 25.7
Mean Flexural Strength @5% Strain (MPa) 66.8
60.1
Mean Vicat Soening Temperature ( C) 80.9
Chemical Resistance No colour changed and visual defects
Item Descriptions Length Packaging60pcs/box
60pcs/box
40pcs/box
100pcs/box
100pcs/box
100pcs/box
2.45m
2.45m
2.45m
2.45m
2.45m
2.45m
Stainless Steel Round 12mm
Stainless Steel Round 9mm
Stainless Steel Square 9mm
PVC Round 12mm
PVC Round 9mm
PVC Square 9mm
STAINLESS STEEL
SQUARE TILE TRIM
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Tile Trims Tiling Works
OPEN-EDGE TILE TRIM
PS-10 10 10 12 22
PS-12 11 12 18 30
PS-15 15 15 20 35
A B C D
Type
Finish
Tensile Strength (MPa)
Elogaon (%)
Hardness (Hv)
Thickness (mm)
A
B C
D
G304/316
BA
520
40
220
0.4
-
-
--
-
-
-
-
-
-
Tile Trim
17
Mean Deflecon Temperature ( C)
81010_KUS arch_II_8.ai 25 1/17/11 12:06 PM81010_KUS arch_II_8.ai 25 1/17/11 12:06 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 24/35
Item Descriptions Length Packaging
CJS-25 (G304/G316)
CJB-25 (C2600)
2.0m
2.0m
60pcs/box
60pcs/box
Stainless Steel & Brass Strips
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
STAINLESS STEEL STRIP (CJS-25)
BRASS STRIP (CJB-25)
Tiling Works
Type G 304/316
BA
52040
220
0.4
Finish
Tensile Strength(MPa)
Elongaon(%)
Hardness(Hv)
Thickness (mm)
Mean Tensile Strength(MPa)
Mean Flexual Strength @5% Strain(MPa)
Mean Deflecon Temperature( C)
Mean Vicat Soening Temperature( C)
Chemical Resistance
Technical Specifcation(Stainless Steel Strip) (Brass) (PVC)
C 2600
1/2 H
37030
105
0.4
K.U.S’s CJS-25 and CJB-25 are the newly innovated products that are cost saving and environmentally riendly.
Wrapped with stainless steel and brass over the PVC structure, both are also fexible in height due to its adjustablefanges advantage. The products are widely used or common areas such as, parquet to parquet and parquet to tiles.
With these new items, elegant foor and wall trimmings have become economical and undemanding or most
development projects.
Benefts o CJS-25/CJB-25
1.
2.
3.
3-Option Prof iles
CJS-25/ CJB-25
Only top part o exposed prole is wrapped with stainlesssteel/brass sheet hence it reduces cost price compared to the wholeprole made o stainless steel/brass.
18
It is light in weight as the whole prole is composed o less than 7%o stainless steel/brass.
Three optional proles can also be adopted by having breakablelines along the component.
25.7
56.3
61.5
80.7
No colour changed and visual defects
-
-
-
-
-
-
-
-
-
-
-
-
-
-
81010_KUS arch_II_8.ai 26 1/18/11 3:04 PM
81010_KUS arch_II_8.ai 26 1/18/11 3:04 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 25/35
Divider Strips
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
K.U.S’s TD-11 are designed to relieve stress and control cracks on large surface area of a concrete slab. These cracks
are usually caused by expansion and contraction when excessive horizontal movements occur.
Tiling Works
25.7
56.3
61.5
80.7
No colour changed and visual defects
Technical Specifcation
Mean Tensile Strength(MPa)
Mean Flexual Strength @5% Strain(MPa)
Mean Deflecon Temperature( C)
Mean Vicat Soening Temperature( C)
Chemical Resistance
CJT-11G/TD-11
CJT-11G
TD-11
2-Option Prof iles
Item Descriptions Length Packaging
CJT-11G
TD-11
3.0m
3.0m
50pcs/box
100pcs/box
CJT-11G is designed to relieve stress in between tiles. Its built-in cavity serves as a bufer that provides good spacing to
protect the tiles rom movements caused by expansion and contraction. It also has a perorated line at 1 side o the
ange or easy breakage when installing in perimeter or near the wall.
19
81010_KUS arch_II_8.ai 27 1/17/11 12:08 PM81010_KUS arch_II_8.ai 27 1/17/11 12:08 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 26/35
Tile Adaptor
TILE ADAPTOR
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Tile Adaptor is a necessity when it comes to installing tiles surrounding the ventilation sleeve o a household
shelter located in the kitchen. K.U.S’s Tile Adaptor was design in ull accordance to HDB’s specifcations.
Tiling Works
270
55
84
3.1
14.3
Tile AdaptorTechnical Specifcation
Tensile Strength (kg/cm )
Elogaon (%)
Heat Distoron Temperature ( C)
Melt Index (g/10 min)
Izod Impact Strength (kg.cm/cm)
2
20
81010_KUS arch_II_8.ai 28 1/17/11 12:08 PM81010_KUS arch_II_8.ai 28 1/17/11 12:08 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 27/35
L-STRIP
Control Joints provide good spacing between concrete slabs. The built-in cavity serves as a bufer or oor expan-
sion on hot days and compression in cold days. A slab without Control Joints will crack and reduce the liespan o
the concrete slab.
K.U.S’s L-Strips are designed to minimize the cracks due to expansion and contraction o concrete oor in a
designated acceptable manner. It is also used as a divider o two or more diferent oor sections such as oor nish
with tile, terrazzo and concrete.
Control Joint
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
25.7
56.3
61.5
80.7
No colour changed and visual defects
Technical Specifcation CJ/ L-Strip
Screeding Works
CJ
Item Descriptions Length Packaging
CJ-30
CJ-40
CJ-50
L-Strip
3.0m
3.0m
3.0m
3.0m
50pcs/box
30pcs/box
30pcs/box
20pcs/box
A
B
C
CJ-30 30 9 5
CJ-40 40 15 11
CJ-50 50 15 11
A B C
21
Mean Tensile Strength(MPa)
Mean Flexual Strength @5% Strain(MPa)
Mean Deflecon Temperature( C)
Mean Vicat Soening Temperature( C)
Chemical Resistance
81010_KUS arch_II_8.ai 30 1/17/11 12:09 PM81010_KUS arch_II_8.ai 30 1/17/11 12:09 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 28/35
27.2
66.8
60.1
80.9
No colour changed and visual defects
Angle Bead/Inner BeadTechnical Specifcation
Item Descriptions Length Packaging
AB-1 W/G
IB-7 W/G
2.45m
3.0m
100pcs/box
200pcs/box
Angle Bead
Inner Bead
IB-7
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Drywall Installation Works
Our vinyl angle beads are specially manuactured with striation and peroration along fanges, which providepositive bonding o plaster to the product and substrates which they are attached. It also creates excellentalignment at corner or angle o structure ater nishing is done.
90 internal corners are usually the most dicult alignment aspect during wall plastering. K.U.S has developed theInner Bead to counter this problem. The Inner Bead is designed to give a perectly 90 straight and sharp internalcorner regardless whether the walls meet perectly at the corner. Due to its sel aligning characteristic, it makesplastering o internal corners easier and more ecient thus saving both time and money.
AB-1
22
Original Material
Green Material
W
G
Mean Tensile Strength(MPa)
Mean Flexual Strength @5% Strain(MPa)
Mean Deflecon Temperature( C)
Mean Vicat Soening Temperature( C)
Chemical Resistance
81010_KUS arch_II_8.ai 32 1/17/11 12:09 PM81010_KUS arch_II_8.ai 32 1/17/11 12:09 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 29/35
Z -Bead
27.2
66.8
60.1
80.9
No colour changed and visual defects
Z- BeadTechnical Specifcation
Mean Tensile Strength(MPa)
Mean Flexual Strength @5% Strain(MPa)
Mean Deflecon Temperature( C)
Mean Vicat Soening Temperature( C)
Chemical Resistance
Item Descriptions Length Packaging
ZB-09 W/G
ZB-12 W/G
2.45m
2.45m
200pcs/box
200pcs/box
Z-BEAD(Ceiling Application)
Z-BEAD(Flooring Application)
ZB-09 10 12 20
ZB-12 12 12 20
A B C
A
BC
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Drywall Installation Works
The wide perorated fange allows topping o key to board, eliminating the needs o taping the fanges. Z-Bead
intelligently creates a 12mm reveals or relie detail in drywall and at the same time encases the raw edges o drywall.
It is also used at the juncture o dissimilar materials and can be used in either vertical or horizontal position.
23
Original Material
Green Material
W
G
81010_KUS arch_II_8.ai 33 1/17/11 12:09 PM81010_KUS arch_II_8.ai 33 1/17/11 12:09 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 30/35
Item Descriptions Length Packaging
LB-25 W/G
CB-12 W/G
2.45m
2.45m
100pcs/box
100pcs/box
27.2
66.8
60.1
80.9
No colour changed and visual defects
L- BeadTechnical Specifcation
L-Bead
L-BEAD
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
CB-12
Casing Bead
Drywall Installation Works
K.U.S’s PVC L-Bead is specially developed to substitute the conventional aluminum L-Bead o which the metalliccolor can never match the color o the wall. The PVC L-Bead does not only bring you saving, it also ofers easy installa-
tion and painting characteristics.
K.U.S’s Casing Bead main capability is to provide as an encasement to raw edges o drywall. This will enable good
butting o the substrates such as masonry, glass, window and door encasements preventing moisture rom
migrating into board. It is also used as a moisture barrier around bathtubs and showers.
24
Original Material
Green Material
W
G
Mean Tensile Strength(MPa)
Mean Flexual Strength @5% Strain(MPa)
Mean Deflecon Temperature( C)
Mean Vicat Soening Temperature( C)
Chemical Resistance
81010_KUS arch_II_8.ai 34 1/17/11 12:10 PM81010_KUS arch_II_8.ai 34 1/17/11 12:10 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 31/35
Drywall Control JointTechnical Specifcation
Mean Tensile Strength(MPa)
Mean Flexual Strength @5% Strain(MPa)
Mean Deflecon Temperature( C)
Mean Vicat Soening Temperature( C)
Chemical Resistance
Drywall Control Joint
DCJ-6
Item Descriptions Length Packaging
DCJ-6 W/G
DCJ-12 W/G
2.45m
2.45m
100pcs/box
100pcs/box
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Drywall Installation Works
K.U.S Drywall Control Joint serves dual functions, namely, to provide distinctively architectural pleasing break ondrywall surfaces as well as to act as expansion joint in absorbing wall movement generated from vibration.
27.2
66.8
60.1
80.9
No colour changed and visual defects
DCJ-12
25
Original Material
Green Material
W
G
81010_KUS arch_II_8.ai 35 1/17/11 12:10 PM81010_KUS arch_II_8.ai 35 1/17/11 12:10 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 32/35
Comparison between Zinc and PVC Angle/Corner Beads
Zinc Profiles PVC Profiles (Corner Bead, Angle Bead, etc.)
Safety Made of thin zinc sheet, chip off
upon HIGH impact, leaving sharp
edges of zinc sheet with high risk
on injury.
Made of thicker PVC which will only leave
indentation mark on high impact, reducing risk
on injury.
Design selection Only limited to a few designs. Multiple designs are available for different
applications:
External corner plastering with various thicknessHousehold shelter door corner skim coat
Acute angle and curve corners plastering
Internal 90 corner plastering
Window ledge 2-in-1 drip line and corner bead
plastering
Re-plastering Once chip off with cavity, re-plaster
over the damaged area is not
possible.
Re-plastering is easy over the indentation mark.
Rust resistance Only thin layer of plaster covering
the zinc corner bead, water moisture can seep through causing
material to rust.
PVC material does not rust.
Appearance The material is dark in color, thus
the wall corner will surface a dark
line after some time.
White PVC material blends in very well with
plaster and paint.
Handling The stiff material can cause
permanent deformation upon
mishandling.
PVC material is flexible, lower risk to permanent
deformation during handling.
Laboratory Test Compliance to:
ASTM D638-03 Tensile Test
ASTM D790-03 Flexural Test
ASTM D1525 Vicat Softening Point
ASTM D648 Deflection Test
ASTM D1308 Chemical Test
o
Evaluations
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
_______
26
81010_KUS arch_II_8.ai 36 1/17/11 12:11 PM81010_KUS arch_II_8.ai 36 1/17/11 12:11 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 33/35
Self - Adhesive FibermeshK.U.S’s self-adhesive Fibermesh plays an important role to minimize hair line crack along the joint
connection between two adjacent dry walls as well as lightweight concrete panels during skim coat
plastering.
SELF-ADHESIVE FIBERMESH
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
Item Descriptions Packaging
18rolls/box
36rolls/box
100mmx50m
50mmx75m
Drywall Installation Works
Leno
8nos/ in
8nos/ in
60g/ m
147.2N/25mm
Sel-Adhesive FibermeshTechnical Specifcation
Width
Length Per Roll
Weave
Warp
We
Weight
Tension Load
50 mm 100mm
27
75 m 50m
2
81010_KUS arch_II_8.ai 37 1/17/11 12:12 PM81010_KUS arch_II_8.ai 37 1/17/11 12:12 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 34/35
Item Description Packaging
25pcs/bundlePP Sheet
Item Description Length Packaging
Protecve guard 2.2m 25pcs/bundle
Protective Sheet
Protective Guard
PROTECTIVE SHEET
PROTECTIVE GUARD
K.U.S Holdings (S) Pte Ltd14 Senoko Loop Singapore 758150 T: +65 6770 2222 F: +65 6770 2233
K.U.S now ofers new range o protective materials. Our cost saving PP sheet gives substantial protection in keepingthe oor and suraces protected rom scratches and stains during construction period. The ute ridges and at
backing layers o the product gives a great cushioning while covering and shielding short or long length o items
even in irregular shapes.
K.U.S’s Protective Guard is produced rom PVC incorporated with sot portion along the angle tip so as to absorb
minor impact load application and well temporary protect the nish o structure corners. It is also easy to install and
repeatedly use.
Protective Materials
PP SheetTechnical Specifcation
Material Polypropylene
Length (mm) 2000
Width (mm) 1000
Finish White & Transparent
28
81010_KUS arch_II_8.ai 39 1/17/11 12:12 PM81010_KUS arch_II_8.ai 39 1/17/11 12:12 PM
5/12/2018 KUS New Brochure - slidepdf.com
http://slidepdf.com/reader/full/kus-new-brochure 35/35
Grouting Hand Pump
GROUTING HAND PUMP
Concrete Nail
CONCRETE NAIL
Concrete NailTechnical Specifcation
Length
Gauge (BWG)
Finish
Yield strength
Tensile strength
1.5” 2” 2.5”
9.5 9.5 8
Galvanized (Twilled)
460N/mm
660N/mm
2
2
Item Description Packaging
0.5kg/boxConcrete Nail 1.5”/2.0”/2.5”/3.0”
Nylon Twine
NYLON TWINE
Item Description Packaging
50rolls/boxNylon Twine
Technical Specifcation Nylon Twine
Nylon
White
233N
78%
Material
Colour
Mean ulmate tension load Mean elongaon
Other Accessories
The Grouting Hand Pump is an essential accessory or masonry and pre-cast concrete installation works. It is used
or pumping the cement grout to fll-up the gaps or voids in areas that are usually ound in between joints o brick
wall and door rame, at the top course o brickwork and beam/slab sot, between pre-cast concrete components
and etc. The hand pump is made o plastic and light in weight thereore it is easy to carry and easy to wash aterused.
K.U.S’s Concrete Nail is used to secure objects into masonry, concrete and other hard materials. Nailing into such
materials require high material strength compared to ordinary nail, hence it is made o high carbon steel to be able
to withstand strong hammering action and also incorporated with uted body to enhance the ability o easy
penetration and pull-out strength. The zinc plating fnishing urther improves the corrosion resistance.
Nylon Twine is made o 100% nylon which marks the characteristic o strong resistance to mildew, rot, abrasion,
cement, oil and other chemical stains. Its ductility property has made it an excellent vertical and horizontal
alignment and marking tool in the construction industry. Nylon Twine is also commonly known as Masons Twine
and it’s packed in 90g per roll.
29
81010_KUS arch_II_8.ai 41 1/18/11 3:01 PM81010_KUS arch_II_8.ai 41 1/18/11 3:01 PM