Post on 13-Apr-2017
NATURALTOUCH
2015 PROJECTSPECIAL
FEATURES
Formaldehyde(Carcinogenic) Zero Release
VOC Free
National Authentication of Zero Release of Formaldehyde
(Benzene. Toluene, Xylene Free – Harmless, Odorless)
Special FeaturesNatural Touch
Prevent New-House Syndrome
More than 25 Years of UV Protection
Excellent Chemical Resistance on Coating, Machine/Metal Plant, Pulp/Paper Mills
There are no discoloration, no uneven flower, no softening, no sulfur changes of 100% exposed to vapors from 30% hydronic acid in hot dip coating plant.
As we done 25 year test by making 200 hours as annuallyequivalent test results, there were no cracks, no peeling,and no effect on the coating which maintains strong, flexibleAnd high elasticity without any changes.
Strong Adhesive on Any Surface
Performing tightly adhered to the adhesive force to a variety of different building materials and demonstrates excellent penetration on glass, FRP, acrylic, aluminum, stainless steel, iron (including rusty steel), asphalt, asbestos, gtpsum, polyurethane, epoxy, concrete, wood, ALC boards, plated metal, and etc.
Insulation and Energy Savings in Internal/External Walls
Used in Domestic Standard Fire Prevention Protection Area
Nonflammable & Flame Retardant Approved
Use fireproof outstanding ASB
High Insulation Performance of High voltage of 42,000V in 2mm coating
Insulated 30,000V from the actual coating 1.5mm
Use of an Insulating Material of Railways, Electric Vehicles, and other Electric Control Devices
Special Features
Reduce Fuel Cost of Refrigerated Containers, Cold Storage, Refrigerated Trucks
Heat reflective and radioactive blocks the hear of summer sunshine excellent insulation of high-temperature ceramic and winter energy savings to suppress the leaking heat and cold outside, saves heating costs.
Complete Blocked Indoor Humidity
Temperature difference from in/outside the building causing high room humidity caused by poor temperature control or construction characteristics can be 100% controlled.
Anti-Carbonation ConcreteConcrete, Cement elements advanced protection and causemortar solid corrosion protection (Life Protection/reinforcementof maintenance of buildings)
Natural Touch
Meets the bio-safety standards of OIE and WHO
Dust mites, mold and odor blocking prevention
· Prevent bacterial labs, livestock bacterial leakage and intrusion· Protecting the life of the structure to prevent the concrete carbonation process air impervious
· Anti-fungal and odor barrier as a food plant maintenance/dairy plant cleanliness and hygiene maintenance, etc.· Dust such as frequent operation of the fork lift vehicle operation, such as high elasticity and non-contamination of the various objects that are robust in the high hardness and elasticity to avoid in advance by the high density of the dry coating
제품 특징
10 Year Waterproof GuaranteeFully waterproof with special waterproof cracks implementation process of applying Natural Touch and the outer wall due to severe roof condensation and moldExcellent flame retardant and waterproof
· Can apply on wood and mineral building materials · Unlike other existing waterproofing, waterproofing layers
returns without removal of epoxy, urethane, mortar, and etc. which can reduce the time and cost
· Superior to Salt exposed ship, buildings near beach, and waterproofing
High term of possession of hardness with a high elastic stretch, High density coating forming
While having air-permeability it prevent water, humid, freeze and burst, whitening resistance, and aging which protects the life of the structure.
· High resistance to corrosive environment such as moisture and air.
· Can apply by removing severe rusted part of the steel without sanding the minor rust part of the steel due to strong adhesive character
네츄럴터치 Special FeaturesNatural Touch
제품 소개
NT-301 Primer1. Outline
Water-soluble high molecular
Specialty synthetic resins
Inorganic functionality stiffener Specialty rustproof
+
Strong adhesion and penetration of primer
Strong adhesion to most surface No VOC emissions and formaldehyde Nonflammable Flame Retardant Salinity tolerance, chemical resistance, corrosion protection - primer paint of various steel structures
2 . APPLICATION
Concrete, cement surface of the reinforcement mortar surfaces - Concrete deterioration and prevent anti Carbonation
Primer coatings that require a strong adhesion to a variety of materials
Acid, alkali, flame-retardant paint primer under such harsh corrosive environments
Eco-friendly paint primer paint such as sick building syndrome
Sterile rooms, laboratories, including bacterial leakage and paint primer coating to prevent the intrusion of confidentiality
3 . Specification
Div. 10℃ 20℃ 30℃
Touch Dry
50min 30min 20min
Dry Cured
2hr 60min 40min* The drying time can vary depending on site conditions and specifications.
4 . Painting Specification
PREPARATION: oil, moisture, dust and other foreign substances in the coating is completely removed 1~3 times of diluted with water according to surface Application methods: brush, roller, mortar gun, air and airless gun Painting conditions: More than 5 ℃ Recommended follow-up paints: NT Mighty products, epoxy, urethane, and various water-based paints
Flip the box every 60days in more than 5℃ condition
Packing : 10kg/BOX
Z TYPE : Airtightness, high temperature, insulation
Main: Special one-component material
Color: Clear, Black, White APPEARANCE: Semi-glossy Weight: 1.1 ± 0.05 Solids content (%): 49 ± 1% Viscosity (mPa.s): 2,800 ~ 3,000 PH : 6.5~7.5 Elongation: more than 700% Theoretical coverage and
recommended film thickness: 18m2/kg, 20μ Drying time
네츄럴터치 Special FeaturesNatural Touch
NT- 302 High Functional Mid Paint 1 . Outline
Water-soluble high molecular
Special emulsionSynthetic resins
Functional fillers(Inorganic mineral
powder, natural stone material)
)
+
Highly functional building
Midway paint
Architecture, the internal and external insulation, non-flammable, waterproof, airtight and VOC and formaldehyde emissions zero release
2 . APPLICATION The purpose of the thermal
insulation apartments serious internal and external wall loss
Cold storage, cold storage, such as energy savings
Fungi, mites banggyun effect to block the harmful multiply
Condensation prevention of various structures
The risk of fire retardant in the area, for the coating of non-flammable
Sick House Syndrome prevention of eco-friendly paints
[Photos] health research facilities, research centers airtight waterproof
wall construction
Div 10℃ 20℃ 30℃
Touch Dry
90min
60min 40min
Dry cured
3hr 2hr 60min* The drying time can vary depending on site conditions and specifications.
4 . Painting Specification
Application methods: brush, roller, mortar gun, air and airless gun
Painting conditions: More than 5 ℃
Packing : 15kg/BOX
Main: Special one-component synthetic resin emulsion
Color: Gray Exterior coating: matt Weight: 1.5 ± 0.05 Solids content (%): 75 ± 1% Viscosity (mPa.s): 8,500 ~ 9,500 /
PasteType Acidity (pH) : 7.0~8.0 Elongation: 700% 이상 Recommended dry film thickness
and theoretical spreading rate: 3.6m2/kg, 250μ
CP of theoretical coverage and recommended dry thickness: 7.2m2/kg, 125μ
Drying Time
3 . The coating design (20℃, humidity of 60% basis)
Z TYPE : Airtightness, high temperature, insulation
Flip the box every 60days in more than 5℃ condition
NT-303 (Mid Paint)1 . Outline
Water-soluble ethylene
Acetic acidVinyl-based emulsions
Synthetic resinsInvasive activitySpecial cements
+
After high functional coating typeArchitectural coatings midway
Inorganic natureRe-mineral powder
2. APPLICATION The purpose of the thermal
insulation apartments serious internal and external wall loss
Cold storage, cold storage, such as energy savings
The risk of fire retardant in the area, for the coating of non-flammable Midway eco-friendly paint coatings prevent the sick building syndrome
Special anti-vibration and anti-slip coatings for residential floor area
3 . The coating design (20℃, humidity of 60% basis) Ingredients: one-component
ethylene vinyl acetate resin emulsion
Color: light gray, dark green Exterior coating: matt Weight: 1.6 ± 0.05 Solids content (%): 79 ± 1 Viscosity (mPa.s): 11,500 ~
12,500. Paste Type PH: 7.0 ~ 8.0 Recommended dry film
thickness and theoretical spreading rate: 24m2 / kg, 400μ
CP of the recommended dry film thickness and theoretical spreading rate: 4.8m2 / kg, 200μ
Drying time
Div 10℃ 20℃ 30℃
Touch Dry
120min
80min 50min
Dry Cured
4hr 120min 60min
4 . Painting Specification
희석제 Thinner: When you need to adjust the viscosity up to 2% of fresh water to dilute Painting Method 1: brush, roller, trowel, mortar gun, air spray Painting Method 2: Use airless spray is used, the type L3 CP
Painting conditions: More than 5 ℃
Flip the box every 60days in more than 5℃ condition
Packing : 15kg/BOX
Z TYPE : Airtightness, high temperature, insulation
Nonflammable flame retardants Formaldehyde and VOC are not
released Eco-friendly products Railway and subway electric
vehicle structural materials non-flammable water-soluble coating material
* The drying time can vary depending on site conditions and specifications.
NT-300 Architectural Top Paint1 . Outline
Water-soluble high molecular
Specialty plasticsInorganic functional
Synthetic composites+
Low pollution and weatheringBuilding topcoat
Function and service life of the various Painting Coating
High-end low-staining of protection
Construction of weather resistant topcoat.
And has excellent impact resistance and abrasion resistance of the elastic film, as well as developing and maintaining long coat appearance choking durable coating with almost no UV damage2 . APPLICATION
Architectural coatings requiring the weather resistance of the second structure
Public buildings and places a severe contamination of antifouling paints
Thermal insulation coatings for various expenses and savings
Bacteria defense effects and anti-condensation paint buildings
Fire protection, fire retardant coatings of semi-non-combustible fire protection area
Eco-friendly topcoat to fundamentally prevent the sick building syndrome
Laboratory bacterial leakage and intrusion prevention coatings
Dustproof and anti-slip finish paint for residential floor area
3 . The coating design (20℃, humidity of 60% basis)
4 . Painting Specification
Application methods: brush, roller, mortar gun, air and airless spray
Painting conditions: More than 5 ℃
Packing : 10kg/BOX
Z TYPE : Airtightness, high temperature, insulation
Flip the box every 60days in more than 5℃ condition
Main: Special one-component resin Color: Gray (Silver Dark), white,
custom production FILM APPEARANCE: matt, gloss Weight: 1.1 ± 0.05 Solids content (%): 45 ± 1% Viscosity (mPa.s): 800 ~ 1,200 PH: 6.5 ~ 7.5 Theoretical coverage and
recommended film thickness: 15m2 / kg, 20μ Drying time
Div 10℃ 20℃ 30℃
Touch Dry
60min 30min 10min
Dry Cured
2hr 60min 30min
* The drying time can vary depending on site conditions and specifications.
NT-333 Waterproof1 . Outline
Permeable silicone-based water-repellent surface, functional products with a waterproof
Durability
Alkali
Weather
Anti-efflorescence Anti-aging
Water-repellent performance
Water-repellent performance and excellent water resistance
Available in wood and mineral materials
2 . APPLICATION
Anti-efflorescence and anti-aging inner and outer moisture barrier
on woods and others UV Protection for micro cracks Anti-Bacterial effect Fundamentally prevent the sick
building syndrome Full color stain-resistant due to
the protection of building color
Color: milky white liquid (colorless and transparent after curing)
Weight: 1.03 ± 0.05
FILM APPEARANCE: clear
Theoretical coverage and recommended
Dry Film Thickness: 30m2 / kg, 10μ
Drying time: 30-40 minutes
4 . Painting Specification
Application methods: brush, roller, mortar gun, air and airless spray
Painting conditions: More than 5 ℃
Flip the box every 60days in more than 5℃ condition
Packing : 9kg/BOX
3 . The coating design (20℃, humidity of 60% basis)
Item Reg. PaintEco-friendly
paintNatural Touch Eco-
friendly Paint
VOC,Carcinogen Have Have None
NonflammableFlame Retardant
None Average Best
Isolation None DifficultBest
(42,000V protection)
Insulation NoneAverage
(Sun protection)Best
(25Year UV Protection)
Anticorrosive Difficult GoodBest
(High-density, building life protection)
Antifungal Difficult GoodBest
(High modulus, high density)
Anti-humidity Difficult GoodBest
(Indoor perfect moisture barrier)
Dustproof Difficult GoodBest
(No static buildup)
Waterproof None NoneBest
(Fully waterproof implemented)
Salt Tolerance Difficult AverageBest
(Resistance to salinity)
Corrosion protection
Difficult GoodBest
(High density, anti-corrosion / anti-whitening)
Chemical Resistance
Difficult AverageBest
( 염산 ,Resistant to chemicals and acids)
Weather Resistance
Difficult AverageBest
(25 Year UV Protection)
Intense Adhesion Average Good
Best(Tiles, glass, aluminum, enamel, FRP, rusty iron,
stainless steel, etc.)
Cold Resistence Difficult AverageBest
(Refrigerated containers, refrigerated warehouse)
Surface crack resistance
Difficult DifficultBest
(High modulus, high density)
Water Retention Difficult DifficultBest
(Universal Maintenance)
Comparison of different paints
Waterproofing Name Item
Asphalt wa-terproofing(냉ㆍ열간법 )
Sheet Wa-terproofing
Polyurethane
Waterproof coating
FRP Waterproof
‘Natural Touch’Nonflammable
Eco-friendly wa-terproofing
thickness Thick Mid~Thick Thin Mid Thin
Weight HeavyMid~Heav
yLight Light~Mid Light
Configuration LaminateSingle sheet
Coat Single layer Single layer
JointThermal
dis.Adhesive Seamless Seamless Seamless
Appearance Solid Solid Liquid Liquid Liquid
Tone Black fixed Free Free Free
Construc-tionWork
Method Loose Loose Adhesion Adhesion Adhesion
Wall/Slope Difficult Difficult Difficult Easy Easy
Water rev. cond.
Difficult Difficult Easy Easy Easy
Floor flatness RegularSmooth
Req.Regualar Smooth Req. Regualr
Finish Difficult Difficult Easy Easy Easy
Walking time 4 1(fast) 5(slow) 3 2
Thickness management
RegularPossible
Regular Possible
DifficultRegular Possi-
bleEasy Possible
Perfor-mance Feature
walk (Possible) Regular Regular fast fast
Adhesive - - Average Good Best
RepairingPossible(all re-moval)
Possible(partial rem.)
Possible(Partial rem.)
PossibleBest(no Re-
moval)
Oxygen per-meability
- - Average Good Best
ProtectionFeature
flame inter-ruption per-
formanceAverage Average Good Good Good
Surface crack resistance
- - Average Good Best
Hardness Average Average Average Best Good
Watercourse aptitude rela-
tionshipAverage Average Good Good
Food hygiene Good Good
By Price 1 (Cheap) 2 4 5 3
VOC Have Have Have Have None
Formaldehyde Have Have Have Have None
Other - - - -Universal
Maint.
Comparison of Waterproofing Method
SAJO IND COOL STORAGE WARE-HOUSE SUNG KYUNG
VESSEL
Before After After Before
Construction Practices
TAEYANG METAL com
Before After Before After
YONGPYONG RESORT LIFT
DOOSAN HEAVY INDUSTRY com
Before After Before After
No 2 SUVWAY LINE OF HYUNDAI ROTEM com
BOWWOW FOOD FACTORY com
Before After Before After
WOOREE LIGHTING com
With Natural Touch Corp. …
Color the Nature Thank You.