Post on 29-Aug-2018
E
σ+
σ−
26 Capacitance-2:
How does one understand the shorted
capacitor problem? What happens
to the energy in a shorted capacitor?
1. Dielectrics Constant (lab 4)Dielectric Breakdown
2. Dipoles
3. Energy in Capacitor4. The crossed capacitors problem & lab 3.
I have completed at least 50% of the reading and
study-guide assignments of Chapters 26:4-6A. True B. False
Today pay attention to:
1. Dielectrics: What do they do in Caps and how do they do it?
2. A dipole points from the minus to the plus. When is the max
torque? When are the maximum & minimum energy?
3. Mind the ½ in equations for energy.
4. Two elements are in parallel if they have the same voltage
“drop” across them. In the crossed capacitor problem,are the two circuit elements in series or parallel?
(This is sections 26.2, 26.3, 26.6 & 26.7 of Ch. Sum.)
Calendar: HW 11 due Tuesday 8:45 a.m.
1. Exam 2 is in boxes. Yes, it was tough. Let’s talk.
2. Labs 3 & 4 are due in a 7 days.
iClicker Quiz
First question:
• Why don’t commercial capacitors look like plates from the outside.
Types of Capacitors – Tubular •Metallic foil may be interlaced with thin sheets of paraffin-impregnated paper or Mylar.
•The layers are rolled into a cylinder to form a small package for the capacitor.
Section 26.5
First question: Why don’t commercial
capacitors look like plates from the outside?
�Dielectrics
Capacitors with Dielectrics• A dielectric is a nonconducting material that,
when placed between the plates of a capacitor,
increases the capacitance.– Dielectrics include rubber, glass, and waxed paper
• With a dielectric, the capacitance becomes C = κCo.
– The capacitance increases by the factor κ when the dielectric completely fills the region between the plates.
– κ is the dielectric constant of the material.
• Sometimes we slide a dielectric into a capacitor. What happens?
• 1st case: While you slide an insulator between the plates of a fully
charged capacitor on a battery, the voltage of the capacitor:
A. Decreases B. Increases C. Stays the same
Section 26.5
Capacitors with Dielectrics•A dielectric is a nonconducting material that, when
placed between the plates of a capacitor, increases
the capacitance.– Dielectrics include rubber, glass, and waxed paper
•With a dielectric, the capacitance becomes C = κCo.
– The capacitance increases by the factor κ when the dielectric completely fills the region between the plates.
– κ is the dielectric constant of the material.
•Sometimes we slide a dielectric into a capacitor. What happens?
– If the capacitor remains connected to a battery, the voltage across the capacitor necessarily remains the same & Q goes up.
– If the capacitor is disconnected from the battery, the capacitor is an isolated system & the charge remains the same & V goes down.
Section 26.5
Tricky Review question: While you slide an
insulator between the plates of a fully charged
capacitor on a battery, the q of the capacitor
A. Decreases
B. Increases
C. Stays the same
Dielectrics & Big Capacitances
•For a parallel-plate capacitor, C = κ(εoA) / d
•In theory, d could be made very small to create a very large capacitance.
•In practice, there is a limit to d.–d is limited by the electric discharge that could
occur though the dielectric medium separating the plates.
•For a given d, the maximum voltage that can be applied to a capacitor without causing a discharge depends on the dielectric strength of the material.
Section 26.5
Review Quiz:
T/F The dielectric constant is the
ability of an insulator to not have a
spark penetrate it in high electric
fields. A is true, B false.
Dielectrics, Summary
•Dielectrics provide the following advantages:–Increase in capacitance
–Increase the maximum operating voltage
–Possible mechanical support between the plates
•This allows the plates to be close together without touching.
•This decreases d and increases C.
Section 26.5
54
a. What equation do we use in chapter summaries? Talk to friend or remember
b. Do we have enough info here to do part b? True A or False B pp.
Some Dielectric Constants and
Dielectric Strengths
Section 26.5
54
b. Now we have enough info here to do parts b.
c. What happens to the voltage? A. Decreases B. Increases C. Stays the same
What equation do we use to show this?
While you slide an insulator between the plates of a fully charged capacitor disconnected from a battery, the q of
the capacitor
A. Decreases B. Increases C. Stays the same
Types of Capacitors – Oil Filled
•Common for high-voltage capacitors
•A number of interwoven metallic plates are immersed in silicone oil.
Section 26.5
Types of Capacitors –Electrolytic
•Used to store large amounts of charge at relatively low voltages
•The electrolyte is a solution that conducts electricity by virtue of motion of ions contained in the solution.
•When a voltage is applied between the foil and the electrolyte, a thin layer of metal oxide is formed on the foil.
•This layer serves as a dielectric.
•Large values of capacitance can be obtained because the dielectric layer is very thin so the effective plate separation, d, is very small.
Section 26.5
Types of Capacitors – Variable•Variable capacitors consist of two interwoven sets of metallic plates.
– One plate is fixed and the other is movable.
– Contain air as the dielectric
•These capacitors generally vary between 10 and 500 pF.
•Used in tuning circuits in old style radios.
Section 26.5
Dielectric materials contain polar molecules that can align with an
external field. The field produced
by these dipoles gets added to the external field.
1,00 >=→ κκεεε
water
The dissectible capacitor
Involves corona discharge
to the plastic glass as it is
disassembled.
Electric Dipole•An electric dipole consists of two charges of equal magnitude and opposite signs.
•The charges are separated by 2a =d.
•The electric dipole moment ( ) is directed along the line joining the charges from –q to +q.
Section 26.6
pr
Electric Dipole, 2
•The electric dipole moment has a magnitude of p ≡ 2aq.
•Assume the dipole is placed in a uniform external field,
– is external to the dipole; it is not the field produced by the dipole
•Assume the dipole makes an angle θ with the field
Er
Er
Section 26.6
Electric Dipole in a UNIFORM E field
•Each charge has a force
of F = Eq acting on it.
•The net force on the
dipole is zero.
•The forces produce a
torque on the dipole.
•The dipole is a rigid
object so it experiences
only a torque.
Section 26.6
Dipoles: consider the following collection of dipoles in a uniform electric field. At the time
we see them they are clamped in place.When they are released how many of
them feel a net force?
Dipoles: consider the following collection of dipoles in a uniform electric field. At the time
we see them they are clamped in place.
When they are released how many of
them want to turn clockwise?
Electric Dipole, final•The magnitude of the torque is:
� t = 2Fa sin θ = pE sin θ
•The torque can also be expressed as the cross product of the moment and the field:
�
•The system of the dipole and the external electric field can be modeled as an isolated system for energy.
•The potential energy can be expressed as a function of the orientation of the dipole with the field:
� Uf – Ui = pE(cos θi – cos θf) ® U = - pE cos θ
�This expression can be written as a dot product.
τ = ×p Errr
Section 26.6
What is the maximum energy
a dipole can have in Field E?
A. pE B. ½pE C. zero. D.-pE E.-½pE
What direction does it face at maximum?
What is the minimum energy a dipole can have
in Field E?
A. pE B. ½pE C. zero. D.-½pE E.-pE
The eqn. for a dipole is p=2aq. We have q, how do we get 2a?
d) What is the maximum & minimum energy a dipole can have in Field E?
Energy in a Capacitor –Overview
•Consider the circuit to be a system.
•Before the switch is closed, the energy is stored as chemical energy in the battery.
•When the switch is closed, the energy is transformed from chemical potential energy to electric potential energy.
•The electric potential energy is related to the separation of the positive and negative charges on the plates.
•A capacitor can be described as a device that stores energy as well as charge.
Section 26.4
Energy Stored in a Capacitor:
U= ½Q∆V•Assume the capacitor is being
charged and, at some point, has a charge q on it.
•The work needed to transfer a
charge from one plate to the other is
•The incremental work required is
the area of the tan rectangle.
•The total work required is
qdW Vdq dq
C= ∆ =
2
0 2
Q q QW dq
C C= =∫
Section 26.4
Energy, con’t
•The work done in charging the capacitor appears as electric potential energy U:
•This applies to a capacitor of any geometry.
•The energy stored increases as the charge increases and as the potential difference increases.
•In practice, there is a maximum voltage before discharge occurs between the plates. Breakdown
221 1
( )2 2 2
QU Q V C V
C= = ∆ = ∆
Section 26.4
Potential difference: V
E
Energy density in an electric field:
a very important concluding
remark.
2
021
2
021
2
0212
21 )/(
Volume
EnergyE
d
V
Ad
VdA
Ad
CVu εε
ε=
====
The energy can be considered to be stored in the electric field.
0κεε
QQdAE ==⋅=Φ ∫
Adding a dielectric to any situation
00 κεεε =→
d
A
d
AC ppc
0κεε==
2
0212
21 EEu κεε ==
Some Uses of Capacitors
•Defibrillators–When cardiac fibrillation occurs, the heart
produces a rapid, irregular pattern of beats
–A fast discharge of electrical energy through the heart can return the organ to its normal beat pattern.
•In general, capacitors act as energy reservoirs that can be slowly charged and then discharged quickly to provide large amounts of energy in a short pulse.
Section 26.4
What is the first steps to do part a?
A.Get the equation U=-p●E and find p and E
B.Add C1 and C2 together to get C & Use U= ½ CV².
C.Use U= ½ CV² & add 1/C1 and 1/C2 together to get 1/C.
D.Calculate the Q in each capacitor, sum them and use U=
½ CQ²
We have talked about several geometries and
resultant formulae. Which one do we use here?
We have talked about several geometries and
resultant formulae. Which one do we use here?
A. C. C = κε0 A/d
B. D. C = 4πκε0a
( )2 ln /e
QC
V k b a= =
∆
l
( )e
Q abC
V k b a= =
∆ −
Why?
We will do this problem another time.
The crossed capacitor problem:
111 VCQ = 222 VCQ =
V1 V2C1 C2
+ +
− −
+ +
− −C1 C2
111 VCQ = 222 VCQ =
+ +
− −
+ +
− −
C1 C2
111 VCQ = 222 VCQ =
+ +
− −
+ +
−−
Crossed capacitor problem
C1 C2
21
21
'
''
CC
C
QV
+
−==
'''' 2211 VCQVCQ ==
111 VCQ = 222 VCQ =
V1 V2C1 C2
+ +
− −
+ +
− −C1 C2
111 VCQ = 222 VCQ =
+ +
− −
+ +
− −
Suppose you do the same thing without crossing them.
C1 C2
21
21
'
''
CC
C
QV
+
+==
'''' 2211 VCQVCQ ==
C1 C2
111 VCQ = 222 VCQ =
+ +
− −
+ +
− −
Crossed capacitor problem: special case where V1 = V2
VCQ 11 = VCQ 22 =
V C1 C2
+ +
− −
+ +
− −C1 C2
VCQ 11 = VCQ 22 =
+ +
− −
+ +
− −
C1 C2
VCQ 11 = VCQ 22 =
+ +
− −
+ +
−−
C1 C2
'''' 2211 VCQVCQ ==
+
−=
+
−==
21
21
21
21
'
''
CC
CCV
CC
C
QV
Polar vs. Nonpolar Molecules
•Molecules are said to be polarized when a separation exists between the average position of the negative charges and the average position of the positive charges.
•Polar molecules are those in which this condition is always present.
•Molecules without a permanent polarization are called nonpolar molecules.
Section 26.6
Water Molecules
•A water molecule is an example of a polar molecule.
•The center of the negative charge is near the center of the oxygen atom.
•The x is the center of the positive charge distribution.
Section 26.6
Polar Molecules and Dipoles
•The average positions of the positive and negative charges act as point charges.
•Therefore, polar molecules can be modeled as electric dipoles.
Section 26.6
Induced Polarization•A linear symmetric molecule
has no permanent
polarization (a).
•Polarization can be induced
by placing the molecule in an
electric field (b).
•Induced polarization is the
effect that predominates in
most materials used as
dielectrics in capacitors.
Section 26.6
Dielectrics – An Atomic View
•The molecules that make up the dielectric are modeled as dipoles.
•The molecules are randomly oriented in the absence of an electric field.
Section 26.7
Dielectrics – An
Atomic View, 2
•An external electric field
is applied.
•This produces a torque
on the molecules.
•The molecules partially
align with the electric
field.
– The degree of alignment
depends on temperature
and the magnitude of the
field.
– In general, the alignment
increases with decreasing
temperature and with increasing electric field. Section 26.7
Dielectrics – An Atomic View, 4
•If the molecules of the dielectric are nonpolar molecules, the electric field produces some charge separation.
•This produces an induced dipole moment.
•The effect is then the same as if the molecules were polar.
Section 26.7
Dielectrics – An Atomic View,
final•An external field can
polarize the dielectric
whether the molecules are
polar or nonpolar.
•The charged edges of the
dielectric act as a second
pair of plates producing an
induced electric field in the
direction opposite the
original electric field.
Section 26.7
Induced Charge and Field•The net effect on the
dielectric is an induced
surface charge that results in
an induced electric field.
•The electric field due to the
plates is directed to the right
and it polarizes the dielectric.
•If the dielectric were
replaced with a conductor,
the net field between the
plates would be zero.
Section 26.7