Switches
SWT06B-02
1
Contents
Contents ................................................................................... 1
Slide Switches
Notice ................................................................................ 2
Product Lineup .................................................................. 3
SMT ................................................................................... 4
DIP .............................................................................. 4 - 5
Tactile Push Switches
Notice ................................................................................ 6
Tactile Push Switch ............................................................ 7
Double Action Type ..................................................... 8 - 10
Double Action Type with Shuttle Switch ........................... 11
Switch Units
Introduction ....................................................................... 12
Product Lineup ................................................................. 13
Snap Plate Variation ......................................................... 14
With EL Illumination .......................................................... 15
Multi-Direction Switches
4 Directions .............................................................. 16 - 17
4 Directions Switch (Slide Operation type with push Switch) ......... 17
High Withstand-load Type ................................................. 18
With Encoder .................................................................... 19
Shuttle Switches
Horizontal Type ................................................................. 20
with Push Switch ...................................................... 20 - 21
Vertical Type ..................................................................... 22
Rotary Switch ................................................................... 22
2
Slide Switches Notice
1. The contents of this catalog are applied to a product
only that is not assembled in a customer's product. Please check and evaluate our product in condition that is assembled in your product before use. The
contents in this catalog are only rough specification. Please request and approve our formal specification
before you use.2. The products are designed and manufactured for
general electronic devices. Please do not use them for such devices (medical devices, security devices or aerospace instruments) that need advanced safety or high reliability.
3. This product is not splash-proof construction, and cannot be washed.
4. Storage Condition(1) This product must be stored in normal temperature
and humidity (5 to 35 degree-C, 45 to 85 %RH, no dew formation).
(2) This product must not be stored in atmosphere where a lot of salinities and sulfides exist. (Must not be stored in salinity density of 1% or more and sulfide of 0.03 ppm or more.)
(3) The product must not be stored with excessive load.
(4) Please use this product as soon as possible within 6 months after delivery.
Notice
3
Slide Switches Product Lineup
Type Position Pole Model No. OperatingForce
TerminalPitch(mm)
Travel(mm) Switching mode
SMT Horizontal 2 1 HSW4512-310011 1.5±1N 2.5 1.5 Non-Shorting
DIP
Horizontal
2 1 HSW2060-210010 2±1.2N 2 2 Not Specified
3 1 HSW2061-010019a , c b 2±1Nb a , c 3±2N
2 2 Not Specified
Vertical 2 1 or 2 HSW0700 Series 3±1.5N 2 2 Not Specified
SMT DIP
Rated 0.1A 12V DC 0.5A 15V DC or 0.3A 30V DC
Contact Resistance 100mΩ max. 30mΩ max.
Insulation Resistance 100MΩ min. at 100V DC 100MΩ min. at 100V DC
Withstanding Voltage 250V AC/ 1 minute 250V AC/ 1 minute
Operating Life 10,000 cycles 10,000 cycles
4
Unit: mm
Slide Switches
0.5 7.1 0.5
2.5 2.5
3-0.5
1.3
3
0.87
0.15
1.9
2.5
0.3
1.3
5
1 0.6 1.
10
.4
∅0.8
Travel : 1.5
4-0
.4
3.4
ma
x.
3
1.2 min. 1.2 min.6.7
2.5 2.5
7-0.8
3
2.6
1.5
min
.1.
8
∅0.85
1 32
PCB Layout (Top View)
1 2 3com
Circuit Diagram
Pole-Position Switching Mode
1P-2T Non-Shorting
HSW4512-310011
SMT
22 2 2
3-∅0.8
2-∅1.212 3
1 2 3com
Circuit Diagram
8.4
4.5
3
2
2
0.8
Travel : 2
3.5
22
.1
2.40.5
Pole-Position Switching Mode
1P-2T Not Specified
HSW2060-210010
DIP
Hole Layout (Bottom View)
HSW2060
HSW4512
5
Unit: mm
Slide Switches
3.5
222
.1
2.4
12.4
4.5
3
2
0.80.5
Travel : 2Travel : 2
a b c
2 4 22 2
4-∅0.8
2-∅1.21 2 3 4
Hole Layout (Bottom View)
com1 2 3 4
Circuit Diagram
Pole-Position Switching Mode
1P-3T Not Specified
101
6
Travel : 2
2
58.
53.
53
0.80.5 0.4 0.5
4
R1 R2
2.4
5.5
6-∅0.8
4-∅1.2
2 22.6 2.6
1
6
R1
R2
Hole Layout (Bottom View)
com
com
1
4 5 6
2 3
R1
R2
Circuit Diagram
Model No. Pole-Position Switching Mode Used Poles
HSW0700-01-019 2P-2TNot Specified
R1 R2
HSW0700-01-039 1P-2T R1
HSW2061-010019
DIP
HSW0700-01-019
DIP
HSW2061
HSW0700
6
Tactile Push Switches
1. This product is not the drip proof structure.2. Please don't push the snap plate by anything with
sharp edge such as a needle (Less than a tip ball R1). 3. Please don't push the snapplate directly by fingers.4. Please don't store the product in the atmosphere with
many salt and sulfide.5. This specification is applied to the switch only as a
component. Please confirm and evaluate the switch that is
assembled into your merchandise.6. The storage period must be for six months after your
delivery. (Storage condition:as shown in PACKING drawing)7. Please store the product in normal temperature and
humidity. (temperature : 5 to 35°C,humidity : 45 to 85%RH) because it causes the curve and deformation of the
product in the high temperature and high humidity.
Notice
7
Unit: mm
Tactile Push Switches
0.5
3.6
0.55
2.5
4.8
4
5.3
ab
c d
3
2.85
4.85
4.8
a b
c d
PCB Layout (Top View)
a b
c d
Circuit Diagram
7.56.2
50.
7
7 3.9
2.5
0.58
5
3.9
57
6.1
dc
a b
PCB Layout (Top View)
a b
c d
Circuit Diagram
HKW0763-010012
HKW0766-010012
Rated 50mA 5V DC
Contact Resistance 100mΩ max.
Bounce 10msec max.
Operating Life 500,000 cycles
Operating Force 1.6±0.4N
Stroke 0.2±0.1mm
HKW0763
Rated 50mA 5V DC
Contact Resistance 100mΩ max.
Bounce 10msec max.
Operating Life 2,000,000 cycles
Operating Force 1.03±0.4N
Stroke 0.25±0.1mm
HKW0766
8
Unit: mm
Double Action Switches
a b
c d
First Action
Second Action
Circuit Diagram
4.4
ab
d
c
(2-R1.2
25)2.55
(4.6)
3.2
2.45 2
0.5
0.6
Prohibitive area for pattern 3.8
a
c d
b
2-0.4
4-0.7
4
pad
pad3.
2
4-0.
70.
41.
32.
7
PCB Layout (Top View)
Rated 50mA 5V DC
Contact Resistance 1Ω max.
Insulation Resistance 100MΩ min.at 100V DC
Withstanding Voltage 100V AC/ 1 minute
Operating Life 100,000 cycles
HKW0773 Series
Model Number Types Operating Force Stroke
HKW0773-010011 High load type(2nd tier) 1st 0.8N2nd 2.2N
1st 0.17mm2nd 0.35mm
HKW0773-310011 Standard type 1st 0.8N2nd 1.7N
1st 0.20mm2nd 0.35mm
HKW0773-510011 Low load type 1st 0.4N2nd 1.35N
1st 0.16mm2nd 0.28mm
HKW1773-310011 Non click-feeling type(1st tier) 1st 0.5N2nd 1.9N
1st 0.16mm2nd 0.30mm
HKW0773 Series*
*HKW1773: See table.
9
Unit: mm
Double Action Switches
d c
b a
Full Second Action
Half First Action
Circuit Diagram
Rated 10mA 5V DC max.0.1mA 1V DC min.
Contact Resistance 300mΩ max.
Insulation Resistance 100MΩ min. at 100V DC
Withstanding Voltage 100V AC/ 1 minute
Stroke First Action 0.32mmSecond Action 0.56mm
Operating Force First Action 0.9NSecond Action 2.2N
Operating Life 100,000 cycles
1.05
1.812.2
2.832.192.081.05
2.441.75
1.85
64.
764.
58 4.2
3.16 2 4.8 5 6.7
6.9
1
Prohibitive area for PCB solder resist, FPC coerlayer & Cu pattern
GND pad
PCB Layout (Top View)
21.
76 5.6
5.99 6.2
1.9
4.51.632.37
1.1
1.65
0.32
a
bd
c
Rated 50mA 5V DC
Contact Resistance 1Ω max.
Insulation Resistance 100MΩ min.at 100V DC
Withstanding Voltage 100V AC/ 1 minute
Stroke First Action 0.50mmSecond Action 0.73mm
Operating Force First Action 1.0NSecond Action 2.9N
Operating Life 200,000 cycles
a b
c Second Action
First Action
aCircuit Diagrama
73.92.4
7.73.32 GND PAD
2.71
6.9
6.1
5.5
3.3 3.
1 5
cb
a d
Prohibitive areafor pattern
PCB Layout (Top View)
73.15
2.59
0.4(GND)0.285
1.2
Ope
ratin
g st
art P
oint
6.1
1.3
6.48
4-0.55
4-0.
554.
6
b c
(∅3) a a d
∅1 Recommended
operatin
g area.
HKW0820-010011
HKW0730-010011
HKW0730
HKW0820
10
Unit: mm
Double Action Switches
c b
a d
Second Action
First Action
Circuit Diagram
Rated 50mA 5V DC
Contact Resistance 10Ω max.
Insulation Resistance 100MΩ min.at 100V DC
Withstanding Voltage 100V AC/ 1 minute
Stroke First Action 0.21mmSecond Action 0.45mm
Operating Force First Action 0.9NSecond Action 2.0N
Operating Life 100,000 cycles
4.8
1.18
0.88
2-0.
40.13
1.422.6
5.1
3.2
2-∅0.6
1.5
1.60.67
Prohibitive area for pattern
4-0.50.55
2.81.25
b
a c
d
0.50.85
Gnd Pad
4-0.
6
2-0.
7
2-∅0.7 Hole
(Boss type only)
1.5
2.5
3.3
5.8
PCB Layout (Top View)
Model No. Boss
HKW0731-010011 without boss
HKW0731-210011 with boss
HKW0731-010011
HKW0731
11
Unit: mm
Double Action Switches with Shuttle Switch
1.96
3.38
(8.6)
64.
34.
1
0.4
1.2
0.3
0.9
g c f h i
a
e d
b
2-∅0.7
7.3 9
Prohibitive area for PCB solder resist
GND Pad
(Boss type only)
(Four place) 45° 45°
2.15
4.
5
0.8
6.3
PCB Layout (Top View)
First Action
Second Action
g
i
h
f
Circuit Diagram
CCW CW←→
25° 25°Max. Max.(21.5°) (21.5°)(8° ) (8° )0°
cde
ab
= ON
Shuttle Switch Output Codes
Rated 10mA 5V DC max.0.1mA 1V DC min.
Contact Resistance 300mΩ max.
Insulation Resistance 100MΩ min. at 100V DC
Withstanding Voltage 100V AC/ 1 minute
Stroke First Action 0.17mmSecond Action 0.35mm
Operating Force First Action 0.7NSecond Action 2.0N
Operating Life 100,000 cycles
Rated 10mA 5V DC max.0.1mA 1V DC min.
Contact Resistance 1Ω max.
Insulation Resistance 100MΩ min.at 100V DC
Withstanding Voltage 100V AC/ 1 minute
Stroke First Action 0.17mmSecond Action 0.35mm
Operating Force First Action 0.8NSecond Action 2.2N
Operating Life 100,000 cycles
1.951.2
(∅7.
95)
0.15
5.7
3.8
3.65
2.6
1.1
0.5
0.760.25
7.30.4
30°Full stroke
30°Full stroke
Prohibitive area for Cu pattern4.9
C
b
g d e a
f
h
2-∅0.7(Boss type only)
2.7
1.5
3.7
GND Pad(4 places)
PCB Layout (Top View)
CCW CW←→
25° 25°Max. Max.(20°) (20°)(8° ) (8° )0°
c
de
ab
= ON
Shuttle Switch Output Codes
g
h f
First Action
Second Action
aCircuit Diagrama
HXW0840-210011
HXW1774-210011
HXW1774
HXW0840
12
Switch Units Introduction
Unit:mm
Hosiden has 20-years experience of process & assembly technology for Metal Dome (Snap Plate). Hosiden Metal
Dome Assy developed by switch engineering section based on this experience is very suitable for compact
equipment (mobile phone, PDA, etc.)Only by sticking this Metal Dome Assy on PCB (or FPC), which has contact pattern good Tactile feeling & thin type switch Assy can be made.Of course Switch Unit (Metal Dome Assy with PCB or FPC) is also available.
Introduction
Snap Plate●Good tactile feeling by original design.● Stable products with superior material, tooling and
forming technology.● Variation of the snap plate from 3.5mm dia to 6mm
dia. (Standard made) 6, 5.5, 5, 4.5, 4 and 3.5 dia type and Oval shape,
light force type is available.
Others● High accuracy and easy assembly by original process
technology. (Patented and Patent pending.)● Standard color of a tape is white, but another colors
are available on request.● 4 different structures are available as shown next
page.
Features
Recommended Pattern
■ Key pitch 1.0mm min. pitch on either side of A or B is available.
■ Recommended patternIn case that there is the part of drawing line on the single sided printed board, please apply more than double resister coating.Recommended plating : 0.05μm Gold over 2μm Nickel
Plate DiaA
B
Resist
Plate Dia(mm) 6 5.5 5 4.5 4
PCB Pattern
∅1.5 min.
∅7∅4.5 ∅1.5
min.∅6.5∅4 ∅1.5 min.∅
6∅3.5 ∅1.5 min.
∅5.5∅3 ∅1
.5 min.∅
5
∅3
13
Switch Units Product Lineup
● Reel package is available. (Standard Quantity per Reel : 1,000 pcs)
● High accuracy of positioning snap plates eliminates bad feeling due to displacement.
Structures Characteristic
A
Type
1 Layer (Type usually) Delivery form (Sheet / Reel)
● Simple construction
● Better click feeling due to soft tape.
● Circle type or slit for air vent hole is available.
TapeSnap Plate
PCB(FPC)
Hole
Separator
Tape
Separator(Peels off)
B
Type
2 Layer (With spacer) Delivery form (Sheet / Reel)
● Easy to design contact area on PCB.
● Easy to handle due to double layer.
● Circle type or slit for air vent hole is available.
TapeSnap Plate
Spacer
Hole
PCB(FPC)
Separator
Tape Snap Plate
Spacer
Separator(Peels off)
C
Type
2 Layer (Sealing up and dustproof type) Delivery form (Sheet / Reel)
● Dust proof type
● No air vent hole on the first layer tape
TapeSnap Plate
Spacer with air
PCB(FPC)
Tape Snap Plate
Spacer
Separator(Peels off)
Minute adhesive tape
Each separator is peeled off
D
Type
2 Layer (Not sticking on the substrate side) Delivery form (Sheet / Reel)
● Easy to assemble due to no adhesive type on backside.
Tape
Spacer(Not sticking on the substrate side)
Spacer
PCB(FPC)
Tape Spacer
Separator (Peels off)
Separator
14
Unit: mm
Switch Units Snap Plate Variation
Snap Plate Variation
∅1.5 to ∅1.8Snap Plate
PCB/FPC Contact
Key Top
Tape
Tape : PET 25μm (or 50μm) adhesive 30μm Color white · transparent · black · others
* Boss
Structure
Plate Dia.
(mm)Travel
(mm)Height
(mm)Operating Force
(N)Operating Life
(Cycles) Materials
∅6.0
0.21 0.30 1.8 1,000,000 SUS
0.20 0.26 1.7 1,000,000 SUS
0.26 0.26 1.9 500,000 SUS
∅5.50.22 0.28 1.3 1,000,000 SUS
0.22 0.28 1.6 1,000,000 SUS
∅5.00.18 0.23 1.6 1,000,000 SUS
0.19 0.25 1.8 1,000,000 SUS
∅4.5 0.17 0.23 1.5 500,000 SUS
∅4.00.15 0.20 1.5 500,000 SUS
0.17 0.20 1.8 500,000 SUS
5.4× 4.2 0.23 0.30 1.75 500,000 SUS(Oval)
4× 3.1 0.18 0.25 1.8 500,000 SUS(Oval)
3.5× 2.5 0.16 0.21 1.6 500,000 SUS(Oval)
Snap Plate (mm) *Boss of Key Top(mm)
∅4 ∅1.5 to ∅1.8
∅5 ∅1.5 to ∅1.8
∅5.5 to ∅6 ∅1.5 to ∅1.8
HKW1116
15
Unit: mm
Switch Units with EL Illumination
EL sheetSnap Plate
PCB/FPC Contact
EL Luminance 65cd/m2 (White)
Operating Life 300,000 cycles
Thickness 0.38mm ( EL Sheet : 0.1mm )
HKW1540
16
Unit: mm
Multi-Direction Switches (4 Directions)
6.5 64.052.7
4.05
1.2
1
0.85
2.3
11 13.7
4.654
0.5
0.9
2.3
0.8
4
∅0.85
P
2
3
14C
PCB Layout (Top View)
A
D BP
2
3
1
4
CC
PUSH
Circuit Diagram
P
0.9
0.5
31.
2
D
5.5 5A
4.6
0.3
611
.40.
5
0.7
0.6
B
2.53.8
1.1
C
10.6
14
C 2
3
1.4
0.8
0.50.4
1.952.
2
1.1H1 H
2
PUSH
∅3∅2
∅4.
21
Boss
C0.2
4C
3
1P
2
6.81
49.2
1.7
5.86-1 9.
1
7.2
PCB Layout (Top View)
D
A
BPUSH
C
1
P
24
C
3
Circuit Diagram∅2
8.6
1
C
7.51P
2
A
8.6
7.5
D
4
C3
B
2.3
5
2.1
0.8
1.7
∅5.1
PUSH
Model No. H1(mm)
H2(mm) Boss
HXW0768-010071 5.5 2.3 with
HXW0768-010571 5 1.8 with
HXW0768-610071 5.5 2.3 without
HXW0768-610571 5 1.8 without
HXW0767-610021
Rated50mA 20V DC max.
10μA 1V DC min.
Contact Resistance 100mΩ max.
Insulation Resistance 100MΩ min. at 100V DC
Withstanding Voltage 100V AC / 1 minute
Operating Force
X/Y Axis 4-Direction 0.5N to 1.3N
Push Direction 1.7N to 2.9N
Operating Life 500,000 cycles
Rated50mA 5V DC max.
10μA 1V DC min.
Contact Resistance 100mΩ max.
Insulation Resistance 100MΩ min. at 100V DC
Withstanding Voltage 100MΩ min. at 100V DC
Operating Force
X/Y Axis 4-Direction 1.3N to 4N
Push Direction 3.5N to 5.5N
Operating Life 200,000 cycles
HXW0767
HXW0768
*HXW1768 (8-direction type)
17
Unit: mm
Multi-Direction Switches (4 Directions)
9.20.7 1.2
1.05 1.8
8.2
1 p 2
4.5 1
∅0.85
5.84
c4 3
PCB Layout (Top View)
A B
PUSH
D C
3c4
2p1
Circuit Diagram
1
c4
p
3
2
0.8
1.6
2
1
6.3 0.6
∅0.8
0.8
4
∅1
0.5 0.5
22
5
6.5
B
C
PUSH
A
D
(0.7) (0.7)
4-R0.2
9.3
4-1.6
2-3
9.3
2-0.
5
2
(Slide stroke)(at push operation)
9.9
9.9
1.5
1.5
∅1.5
1.25
0.55
(3.55)
(3.8)
1
2
4
37
6
5
109
8
2-∅0.8
2-∅0.9(holes)
(Cover)
61.6 12
12
10-0
.9
0.9
0.9
(Cover)1.6
7
8
78911.3
2.2
2.2
1
2
4
376
5
109
8
PCB Layout (Top View)
8
7
5 4
3
2
1
6
109
Circuit Diagram
Rated 50mA 5V DC max.
10μA 1V DC min.
Contact Resistance 100mΩ max.
Insulation Resistance 100MΩ min. at 100V DC
Withstanding Voltage 100V AC / 1 minute
Operating Force
X/Y Axis 4-Direction 1.2+ 1.0- 0.7N
Push Direction 2.2+ 1.4- 1.1
N
Operating Life 200,000 cycles
Rated 1mA 10V DC
Contact Resistance 500Ω max.
Insulation Resistance 100MΩ min. at 100V DC
Withstanding Voltage 100V AC / 1 minute
Operating Force 0.6±0.3N
Operating Life 500,000 cycles
HXW0801-010031
TWK7018-0110109
TWK7018 Slide Operation Type
HXW0801
18
Multi-Direction Switches (High Withstand load Type)
Unit:mm
13.7
5.45
3 0.5
2.5
0.8 ∅1.5
6
∅1
3.5
5.8
12.8
11 11 14.3
14.15
1
3.75
3.5
3.45
∅3.5
5
6
1
2
3
C
4
8
7
P
A
B
C
D
E
PUSH
F
H
G
∅1.05
6
4.5
3
10-1.6
11.8
10-1
.22.
7
4 9.6
13.1
2-1.
35
∅1.55
8
7P
65
3C4
1
2
PCB Layout (Top View)
8 H
A
B
C
D
E
ComF
G PUSHPush
7
6
5
3
4
1
2
Circuit Diagram
Rated10mA 5V DC max.
1mA 1V DC min.
Contact Resistance 1Ω max.
Insulation Resistance 10MΩ min. at 100V DC
Withstanding Voltage 100V AC / 1 minute
Operating Force
4 or 8 Directions 2±0.5N
Push Direction 4.5±1N
Operating Life 1,000,000 cycles
Withstand load
Push Direction 400 N
Model No. Operation Function
HXW0805-01 8 Directions (A to H) + Center Push
HXW0805-31 4 Directions (A・C・E・G)+Center Push
HXW0805-01
HXW0805
19
Multi-Direction Switches (With Encoder)
Unit:mm
HXW1723-210010
18.2
∅16.3
9-0.159-0.8
Terminal reinforcing rib(9 places)
∅2.5
∅7.25
5
(7.15)
17.5
∅17.8
17.5
17.4
3.2
1.2
10.2
5
1.9
1
1
2.65
1.82
9゜9゜
(∅2.
5)
A
B
C
D
Push
Phase A Phase B
Encoder, Push Com
4-direction Com
17
4
4
17
3.1
D
A B
C
9-∅1
∅1.15
(Boss Hole)
OFF ON OFF ON
CCW CW
(14pulses,28detents/rotation)
Phase A
Phase B12.86°
Click position
Output signal of the encoder
4 Directions+Push
Encoder
Rated 10mA 5V DC
Number of Pulses 14
Number of clicks 28
Torque 11.5±4.5mN・m
Operating Life (1Cycle:360°both ways)15,000 cycles
Rated 10mA 5V DC
Contact Resistance 200m Ω max.
Push Direction
Operating Force 7.2±1.0N
Stroke 0.39±0.18mm
4 DirectionsOperating Force 3.6±1.0N(1.5mm from tip)
Operating Range 9°max.
Operating Force
Direction 100,000 cycles
4-Directions 100,000 cycles
PCB Layout (Top View)
HXW1723
20
Unit: mm
Shuttle Switches
HOSIDEN
1.8 0.3
(20 ) (20 )
R5.9
CWCCW
∅0.
7510.
83.
4
2.3
2.45
0.6
0.64
8.5
1.2
0.8
R5.6
0.8 8.81.
5
7.4
1.52.25
2
0.5
3.5
c
1 2
10.48.6
7.2
6 ∅0.85
Copper pad shall not exist in this area.
2
earth pattern
1.7
1.7
22.
45
1
2.2
28.3
earth pattern
1.15 1.4
4
2.15
2.05
C
1 2
PCB Layout (Top View)
OFFON
OFFON
(20°) (20°)(10°)(10°) (0°)
CCW CW
1c -
2c -
Ter
min
al N
o.
Output Codes
Rated10mA 5V DC max.
0.1mA 1V DC min.
Output Voltage 1V max. at 1mA 5V DC
Insulation Resistance 100MΩ min. at 100V DC
Withstanding Voltage 100V AC / 1 minute
Operating Force 0.5 + 0.3- 0.2
N
Operating Life 200,000 cycles
OFF
CCW CW
Term
inal
No.
(22.5 ) (18 ) (9 ) (0 ) (9 ) (18 )(22.5 )
ONOFFONOFFONOFFON
c - 1c - 2c - 3
c - 4
Output Codes
PUSH
Circuit DiagramPush Direction
C1 423 P
0.6 1.511
11.8
CWCCW PUSH
R7.
52.2
11.4 9.
5
R7.2
0.3
max
.
Earth Terminal
3.9
4.9
(0.6
)(0
.8)
Full StrokeOn Stroke
2.5 0.4
∅1
0.5 max. 2.8 0.6
4
Lever
(22.5°) (22.5°)
62
R6.4R7.5
11.4
9.5
0.8 1.35
HXW0780
Model No. Lever Color
HXW0780-010031 Dark gray
HXW0780-010041 Black
Rated10mA 5V DC max.
0.1mA 1V DC min.
Output Voltage 1V max. at 1mA 5V DC
Insulation Resistance 100MΩ min. at 100V DC
Withstanding Voltage 100V AC / 1 minute
Operating Force
Shuttle Direction 0.65±0.3N
Push Direction 2±1N
Operating Life 100,000 cycles
HXW0785-010031Non-actuator
PCB Layout (Top View)
2.6
100°
9.612.2
∅1.1
11.710
2.9
4.51
1.8
0.8
1
43.
2
5
1.2
P=1.51 3 2 4 CP
※ Do not use the portion of except for the earth pattern layout.
HXW0783-510011
HXW0783
HXW0780/ HXW0785 with Push Switch
21
Shuttle Switches
Unit:mm
(20 ) (20 )(15.5 ) (15.5 )(0 )
1c -
2c -
Terminal No.
CCW CW
Switching sequence ( =ON)
Output Codes
PUSH
c p
CCW
PUSH
CW
(20 ) (20 )
(7.4R
AD)
6.2RAD
5.6RAD
(2)
2
4-1
5.9
p
21
c
9.5
(0.5
5)O
n st
roke
(0.8
)Pus
h st
roke
9.25
5.9
3.35
1.85
1.6
0.3 max.(Frame stroke)
P.C.BoardMounting face
1.2
1.65
0.35
100
5.33.2
0.8
11.18.17.4
1.35
0.6
2.7
2.75
1.45 0.6
0.96 2.8
1.55
0.45
5.25
0.6
4.2
p2
1 c
earthpattern
earthpattern
PCB Layout (Top View)
Rated10mA 5V DC max.
0.1mA 1V DC min.
Output Voltage 1V max. at 1mA 5V DC
Insulation Resistance 100MΩ min. at 100V DC
Withstanding Voltage 100V AC / 1 minute
Operating Force
Shuttle Direction 0.65±0.3N
Push Direction 2±1N
Operating Life 100,000 cycles
HXW0786-010011
HXW0786 with Push Switch
22
Unit: mm
Shuttle Switches
2-∅1
17.5121.94.2
13.4
94.2
1.6
3.4 8.
51.
82
4.51.
41.
4
3.5
3.2 0.6
2.5
1.410
15.5
a
f f
b
PC
PCB Layout (Top View)
15° 15° 15° 15°
−OFF
−ON
OFF
ONC a
C b
CCW24Click / 1Rotation
CW←→
aRotary Switch Output Codesa
C P
PUSH
aCircuit Diagrama
Rated 1mA 5V DC5mA 5V DC
Contact Resistance 100Ω max.
Push Direction
Operating Force 3±1.5N
Stroke 0.5±0.15mm
Operating Life 100,000 cycles
Rotary Direction
Rotation torque 2 to 8mN∙m
Number of Click 24 click / 1 Rotation
Operating Life 50,000 cycles
2.51.05
0.50.
256 2.4
0.8
3.8 3
0.6
1.25
1.1
11.6
CW
1.65
0.55
CCW
PUSH
0.6
0.5
2.3
4.4
3.8
21.7
2 2 4.6
0.9
1.4
0.8 7.87 1.6
0.81.1
2-∅0.85a
cb
P
PCB Layout (Top View)
CCW CW←→
= ON
(19°) (19°)(12°) (12°)0°c
ab
aShuttle Switch Output Codesa
C P
PUSH
aCircuit Diagrama
Rated 0.1mA 5V DC5mA 5V DC
Contact Resistance 100mΩ max.
Push Direction
Operating Force 2.6±1N
Stroke 0.2+ 0.15- 0.1 mm
Operating Life 500,000 cycles
Rotary Direction
Operating Force 1±0.4N
Operating Range 19±3°
Operating Life 500,000 cycles
HXW0741
CWCCWPush
∅17
∅15.8
∅11.8 2.75 0.7
0.5
HXW0741-010011
HXW0735-210011
HXW0735 Rotary Switch
SWT06
CAUTION FOR SAFETY
Please use our products properly based on our Drawing and Specification.
SwitchesB-02
Printed in Japan 2013. 02 H 26
Hong Kong Hong Kong Hosiden Ltd.Units 1101-02, 11/F., Stelux House, 698 Prince Edward Road East, San Po Kong, Kowloon, Hong KongPhone : +852-23238181 Fax : +852-23520425
Taiwan Taiwan Hosiden Co., Ltd.7F., No.237, Songjiang Road., Zhongshan Dist., Taipei City 104, TaiwanPhone : +886-2-2503-5611 Fax : +886-2-2517-8573
Thailand Hosiden (Thailand) Co., Ltd.889 THAI CC TOWER, 21 Floor, Room 212, South Sathorn Road,.Kwaeng Yannawa, Khet Sathorn, Bangkok 10120, ThailandPhone : +66-2-673-9760, 9761 Fax : +66-2-673-9762
Hosiden Electronics(Shanghai) Co., Ltd.ChinaRoom 802,Kirin Plaza,No.666 Gu Bei Road,Changning District,Shanghai P.R.ChinaPhone : +86-21-5208-1488 Fax : +86-21-5208-1480Hosiden (Shenzhen) Co., Ltd.Room2716, Changping Commercial Building, 99 Honghua Road, Futian Free Trade Zone, Shenzhen, ChinaPhone : +86-755-8348-0952 Fax : +86-755-8359-7722
Singapore Hosiden Singapore Pte. Ltd.28, Genting, Lane, #04-07, Platinum 28, Singapore 349585Phone : +65-6296-8100 Fax : +65-6296-8200
Malaysia Hosiden Corporation(M)Sdn. Bhd.Lot1,Jalan P/1A,Bangi,Industrial Estate,43650Bander Baru Bangi, Selangor Darul Ehsan,MalaysiaPhone : +60-3-8925-8655 Fax : +60-3-8926-6122
France Branch office Paris13, rue Camille Desmoulins 92441 Issy Les Moulineaux, FrancePhone : +33-1-5804-2484 Fax : +33-1-5804-2300
U.K. Hosiden Besson Ltd.12 St. Joseph's Trading Estate St. Joseph's Close, Hove, East Sussex,BN3 7EZ, United KingdomPhone : +44-1273-860000 Fax : +44-1273-777501
U.S.A. Hosiden America Corp.
Head Office120 East State Parkway, Schaumburg, IL, 60173, U.S.A.Phone : +1-847-885-8870 Fax : +1-847-885-0063
San Jose Sales Office550 South Winchester Boulevard, Suite 320, San Jose, CA 95128, U.S.A.Phone : +1-408-985-8780 Fax : +1-408-985-8785
Detroit Sales Office28970 Cabot Drive, Suite 600, Novi, MI 48377, U.S.A.Phone : +1-248-489-0174 Fax : +1-248-489-1154
GermanyHead OfficeGraf-Recke-Straße 82, 40239 Düsseldorf, GermanyPhone : +49-211-96493-0 Fax : +49-211-96493-90
Hosiden Europe GmbH
Head Office 4-33, Kitakyuhoji 1-chome, Yao-city, Osaka 581-0071, JapanPhone : +81-72-993-1010 Fax : +81-72-994-5101
Japan
4-33, Kitakyuhoji 1-chome, Yao-city, Osaka 581-0071, JapanPhone : +81-72-993-1010 Fax : +81-72-924-8937
Overseas Division :
http://www.hosiden.com
・ The contents described in this catalog may be changed without prior notice due to products improvements or discontinuance of production.・ Every product in this catalog is compliant to RoHS directive.
■ Model No. Table
H K W 0 7 3 0 9
H K W 0 7 3 1 10
H K W 0 7 6 3 7
H K W 0 7 6 6 7
H K W 0 7 7 3 8
H K W 0 8 2 0 9
H K W 1 1 1 6 14
H K W 1 5 4 0 15
H K W 1 7 7 3 8
H S W 0 7 0 0 5
H S W 2 0 6 0 4
H S W 2 0 6 1 5
H S W 4 5 1 2 4
H X W 0 7 3 5 22
H X W 0 7 4 1 22
H X W 0 7 6 7 16
H X W 0 7 6 8 16
H X W 0 7 8 0 20
H X W 0 7 8 3 20
H X W 0 7 8 5 20
H X W 0 7 8 6 21
H X W 0 8 0 1 17
H X W 0 8 0 5 18
H X W 0 8 4 0 11
H X W 1 7 2 3 19
H X W 1 7 6 8 16
H X W 1 7 7 4 11
T W K 7 0 1 8 17
Model No. Page
Top Related