CL Series FLO-BEADS feature a superb feel due to their
excellent particle size distribution and perfectly spherical
shape, making them ideal for cosmetics.
CL-2080 is often used in cosmetic foundations.
Low-density polyethylene(LDPE)
High-density polyethylene(HDPE)
HE Series FLO-BEADS are fine particle of high-density
polyethylene Featuring excellent heat resistance.
CL-2080
HE-3040
Particle size:11μm
Particl size :11μm
Shape, Distribution
Low-density polyethylene(LDPE)
Low-density polyethylene(LDPE)
Larger particle sizes such as CL-2507, CL-5007 and
CL-8007 are applied in scrubs and facial cleansers.
CL-2507
CL-8007
Particle size :180μm
Particle size :540μm
Shape, Distribution
Low-density polyethylene(LDPE)
CL-5007 Particle size :330μm
FLO-BEADS EA -209 regards ethylene acrylic acid
copolymer as raw materials.
Because I have a carboxylic acid radical in a molecule,
FLO-BEADS EA -209 shows a hydrophilicity and shows
affinity with the polarity compound.
Ethylene-acrylic acid copolymer(EAA)
Ethylene methyl methacrylate copolymer(EMMA)
FLO-BEADS SE(SOFT-BEADS) are made from ethylene
methyl methacrylate copolymer resin.
FLO-BEADS SE have an urethane particle and the equal
above-mentioned particle softness more softly than
FLO-BEADS.
EA-209
SE-3107A
Particle size :8μm
Particle size :13μm
Shape, Distribution
Articl name Grade
Base resine chanacteristic
Particl size(μm)
Bulk Density
(g/100cc) Repose
angle(゜) Specific leaf
area(m2/g)
Oil
absorption*1(ml/
100g)
FLO-BEADS
CL-2080 11 0.21 44 0.55 50
CL-3080 13 0.24 44 0.52 47
CL-2507 180 0.53 30 0.04
CL-5007 360 0.53 27 '(0.019)*2
CL-8007 600 0.53 29 '(0.019)*2
HE-3040 11 0.36 45 0.61 43
EA-209 10 0.15 45 0.81 63
SE-3107A 12 0.26 45 0.5 55
SE-3207B 12 0.24 44 0.54 56
Particle characteristic
*1:Boiled linseed oil absoption,*2:Calculation value
Evaluation item
Grade
CL-2080
CL-3080
CL-2507
CL-5007
CL-8007
HE-3040 EA-209 SE-3107A
SE-3207B
Characteristic
Base resin class LDPE LDPE HDPE EAA EMMA
Particle size(μm) '11
13
180
360
600
11 10 13
Feel smooth rough smooth smooth smooth
Heat resistant good good strong slightly week week
Solvent resistant good good strong slightly week week
Hardness good good hard slightly week soft
Particle characteristic summary
Grade
m.p(℃) Particle heating temperature
V.S.T(℃) r.t. 50℃ 60℃ 70℃ 80℃ 90℃ 100℃ 110℃ 120℃ 130℃
HE-3040 130
◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ○ △ (HDPE) 124
CL-2080 105
◎ ◎ ◎ ◎ ○ △ × melt ← ←
(LDPE) 76
EA-209 101
◎ ◎ ○ ○ △ × × melt ← ←
(EAA) 86
SE-3107A 100
◎ ◎ ○ △ △ × melt ← ← ←
(EMMA) 75
Heat resistant
3Hr leaves a particle at predetermined temperature and evaluates a powder dispersion state
VST:Vicat Softening Temperature
◎:Stability, a primary particle,○:Slightly cohere, △:Cohesion ,×:Fusion, unification
Heatproof height of HE-3040 facilitates processing. EA-209 and SE-3107A(3207B) that has a soft feeling is weak to heat. Therefore, attention is
necessary for handling.
Small particle size
Specific leaf area
Oil absorption (Boiled linseed oil)
It inflects for decision of the cmposition such as foundation
garments
Specific leaf area ,Oil absorption
The ratio surface area is big
Not the difference by the resin class
A difference by the difference of resin properties of
matter (a functional group)
Solvent resistant(Raw materials resin)
I make a seat of the raw materials resin and leave a dip to various solvents.
It is evaluated the weight change of the seat as swelling magnification (%) afterwards.
Evaluation standard
◎:Weight rate of change less than 5%
○:Weight rate of change 6~15%
△:Weight rate of change 16~30%
×:More than weight rate of change 31%
The tolerance of HDPE that confronts oil used with cosmetics in general is high.
On the other hand, it is necessary to note oil that the tolerance to oil uses enough as for EAA and EMMA.
LDPE HDPE EAA EMMA
(CL-2080) (HE-3040) (EA-209) (SE-3107A)
Silicone oil ◎ ◎ ◎ ◎
Mineral oil ○ ◎ ◎ ○
Squalene ◎ ◎ ◎ ○
LDPE HDPE EAA EMMA
(CL-2080) (HE-3040) (EA-209) (SE-3107A)
Silicone oil ◎ ◎ ◎ ◎
Mineral oil × ○ × ×:
dissolution
Squalene △ ◎ △ ×
Ethylene-acrylic acid copolymer(EAA) 80℃ dip:8Hr
Particle hardness
I compress about 10μm beads and measure the compressive strength at the point in time when 10% were displaced
FLO-BEADS is a particle that is softer than PMMA and Ny.
Especially, FLO-BEADS SE is the more same compared with the urethane or soft particle any more.
Specific gravity control
Particle surface treatment Specific gravity adjustment is free
I control particle dispersibility
Applied technology: Surface reforming
With an inorganic matter, organic matter and a color, I can perform reforming and composition and the coloration of the
particle surface easily.
The feel and particle specific gravity and the reforming of the optics characteristic and various function grants and reforming
of design characteristics that said that I matched with user needs by using these particles are possible.
Applied technology: Surface reforming
FLO-BEADS surface-treated with talc, etc. are used in cosmetics as a foundation material
that has an excellent feel and provides a material regulate effect.
Talc oating
FLO-BEADS surface-treated with titanium oxide are used in cosmetics as a foundation
material that has an excellent feel and provides an ultraviolet shielding effect.
TiO2 coating
Organic materials are used to modify the surface of FLO-BEADS to produce fillers for
cosmetics and toiletry prducts.
PMMA coating
Top Related