Passive Equipment Catalogue Issue 9 (A4), March 2011 Page 1 of 58 © Axell Wireless Ltd www.axellwireless.com
PASSIVE EQUIPMENT CATALOGUE
Axell Wireless Limited Head Office: Aerial House, Asheridge Road, Chesham, Buckinghamshire,
HP5 2QD, United Kingdom Tel: + 44 (0) 1494 777000 Fax: + 44 (0) 1494 777002
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 2 of 58 © Axell Wireless Ltd www.axellwireless.com
Contents
LOW POWER SPLITTERS ....................................................................................................................................4 120-240MHz, N type Connectors, 2 Way............................................................................................................4 300-500MHz, N type Connectors, 2, 3 & 4 Way .................................................................................................5 300-960MHz, N type Connectors, 2, 3 & 4 Way .................................................................................................6 800-2500MHz, N type Connectors, 2, 3 & 4 Way ...............................................................................................7 800-2500MHz, 7/16 DIN Connectors, 2, 3 & 4 Way............................................................................................8 700-2700MHz, N type Connectors, 2, 3 & 4 Way ...............................................................................................9 800-2500MHz SMA Connectors, 2 & 3 Way .....................................................................................................10 2000-4200MHz, N type Connectors, 2 Way......................................................................................................11
SPLITTER/COMBINERS......................................................................................................................................12 68-470MHz, N type Connectors, 2 Way............................................................................................................12 140-470MHz, N type or 7/16DIN Connectors, 2 Way .......................................................................................13 88-2700MHz, Broadband, N type Connectors, 2 Way ......................................................................................14 140/470MHz, N type Connectors, 4 Way ..........................................................................................................15
MULTI-BAND LOW LOSS REACTIVE POWER SPLITTERS .............................................................................16 1700-2500MHz, N type Connectors, 2, 3 & 4 Way ...........................................................................................16 800-2500MHz, N type Connectors, 2, 3 & 4 Way .............................................................................................17 800-2500MHz, 7/16 DIN Connectors, 2, 3 & 4 Way..........................................................................................18 700-2700MHz, N type Connectors, 2, 3 & 4 Way .............................................................................................19 380-2700MHz N type Connectors, 2, 3 & 4 Way ..............................................................................................20
DUAL-BAND LOW LOSS REACTIVE POWER SPLITTERS...............................................................................21 300-960MHz N type Connectors, 2 Way...........................................................................................................21 300-960MHz, 7/16 DIN Connectors, 2 Way ......................................................................................................22
DIRECTIONAL COUPLERS.................................................................................................................................23 120-240MHz, 6 & 10dB, N type Connectors .....................................................................................................23 300-500MHz, 6 to 30dB, N type Connectors.....................................................................................................24 300-960MHz, 6 to 30dB, N type Connectors.....................................................................................................25 800-2500MHz, 5 to 30dB, N type Connectors...................................................................................................26 800-2500MHz, 5 to 30dB, 7/16 DIN Connectors...............................................................................................27 700-2700MHz, 5 to 20dB, N type Connectors...................................................................................................28 700-2700MHz, 20 & 30dB Tap..........................................................................................................................29 380-2700MHz, 6, 10, 15, 20 & 30dB Tap..........................................................................................................30 140/470MHz, 6 & 10dB Tap ..............................................................................................................................31 140/470MHz, 10 & 30dB Tap ............................................................................................................................32 150/2200MHz, 6, 10, 15, 20 & 30dB Tap ..........................................................................................................33 70/1000MHz, 6, 10, 15, 20 & 30dB Tap ............................................................................................................34 Dual Directional 30dB Coupler 824-2170MHz ..................................................................................................35
3 dB HYBRID COUPLER/COMBINERS ..............................................................................................................36 120 to 240MHz, N type Connectors, 30dB Minimum Isolation..........................................................................36 300-500MHz, N type Connectors, 35dB Isolation, Minimum ............................................................................37 300-960MHz, N type Connectors, 23dB Minimum Isolation .............................................................................38 800-960MHz, N type or 7/16 DIN Connectors, 35dB Minimum Isolation, .........................................................39
MULTI-BAND HYBRID COUPLER/COMBINERS................................................................................................40 800-2500MHz, N or 7/16 DIN Connectors, 25dB Minimum Isolation................................................................40 700-2700MHz, N type Connectors, 22dB Minimum Isolation ...........................................................................41 1710-2200MHz, N or 7/16 DIN Connectors, 30dB Minimum Isolation..............................................................42
CROSSBAND COUPLERS/DIPLEXERS.............................................................................................................43 500/800MHz, N or 7/16 DIN Connectors, 50dB Minimum Isolation ..................................................................43 490/650MHz, N Connectors, 40dB Minimum Isolation......................................................................................44 108/143MHz, N Connectors, Isolation >30dB ...................................................................................................45 250/380MHz, N Connectors, Isolation >30dB ...................................................................................................46 400/440MHz, 7/16DIN Connectors, Isolation >30dB ........................................................................................47 1000/1700MHz, N type Connectors, Isolation >50dB .......................................................................................48 2170/2400MHz, N type Connectors, Isolation >40dB .......................................................................................49 1000/1710MHz, 7/16DIN Connectors, Isolation >47dB ....................................................................................50
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 3 of 58 © Axell Wireless Ltd www.axellwireless.com
NETWORK COMBINERS.....................................................................................................................................51 4X4 Hybrid Matrix Combiner/Splitter, 800-2200MHz, N type or 7/16 DIN Connectors.....................................51
MULTI-BAND LOW LOSS POWER TAPS...........................................................................................................52 800-2500MHz, N type Connectors, 30dB Minimum Isolation, ..........................................................................52 Unequal Power Splitters, 700-2700MHz, N type Connectors ...........................................................................53
LOW & MEDIUM POWER LOAD TERMINATIONS.............................................................................................54 HIGH POWER LOAD TERMINATIONS...............................................................................................................55 HIGH POWER 150W LOAD TERMINATIONS.....................................................................................................56 COAXIAL FIXED ATTENUATORS.......................................................................................................................57 ABOUT AXELL WIRELESS..................................................................................................................................58
Drawings in this document are not to scale, all dimensions shown in mm, all specifications are subject to change without prior notice
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 4 of 58 © Axell Wireless Ltd www.axellwireless.com
79 994089
LOW POWER SPLITTERS 120-240MHz, N type Connectors, 2 Way
50Watt Average Power
20dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Environment IP65
N type female connectors The Axell Wireless series of Low Power Splitters is designed to evenly split power cellular signals with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The device can be used with antennas, leaky cable systems and wireless base stations.
Part Number Frequency Band, MHz
Split Insertion Loss dB Max
Split Loss, dB
Weight, g
90-851402 120 - 240 2 0.3 3 625
Maximum VSWR 1.20:1 Average Power Rating 50W Minimum Isolation 20dB Impedance 50 Ohm Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium
or powder paint Connectors N (f) tri-plate DC transmission Between all ports
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 5 of 58 © Axell Wireless Ltd www.axellwireless.com
131
121
30
30
141
30
Ø 4.5
194
158
120
22
90-85120370 90
38
80
LOW POWER SPLITTERS 300-500MHz, N type Connectors, 2, 3 & 4 Way
50Watt Average Power
20dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Environment IP65
N type female connectors The Axell Wireless series of Low Power Splitters is designed to evenly split power cellular signals with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The device can be used with antennas, leaky cable systems and wireless base stations.
Part Number Frequency Band, MHz
Split Insertion Loss dB Max
Split Loss, dB
Weight, g
90-851202 300 - 500 2 0.3 3 400 90-851203 300 - 500 3 0.5 4.8 720 90-851204 300 - 500 4 0.4 6 800
Maximum VSWR 1.20:1 Average Power Rating 50W Minimum Isolation 20dB Impedance 50 Ohm Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium
or powder paint Connectors N (f) tri-plate DC transmission Between all ports
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 6 of 58 © Axell Wireless Ltd www.axellwireless.com
68 883678 107
97
30
30
117
137
127
3030
147
30
LOW POWER SPLITTERS 300-960MHz, N type Connectors, 2, 3 & 4 Way
Dual-Band Frequency Range, TETRA & Cellular
50Watt Average Power
20dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Environment IP65 The Axell Wireless series of Low Power Splitters is designed to evenly split power cellular signals with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The device can be used with antennas, leaky cable systems and wireless base stations. Part Number Frequency Band,
MHz Split Insertion Loss
dB Max Split Loss,
dB Reflected Power
Watts max. Weight,
g 90-851302 300 - 960 2 0.3 3 5 320 90-851303 300 - 960 3 0.5 4.8 9 620 90-851304 300 - 960 4 0.4 6 8 800
Maximum VSWR 1.35:1 Average Power Rating 50W Minimum Isolation 20dB PIM, Passive IM -130dBc, 2x43dBm Impedance 50 Ohm Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium
or powder paint Connectors N (f) tri-plate DC transmission Between all ports
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 7 of 58 © Axell Wireless Ltd www.axellwireless.com
13
1
12
1
28
28
14
1
28
Ø 4.5
129
93
101
91
30
83
22
30
11190-8510035
97
9
3069
LOW POWER SPLITTERS 800-2500MHz, N type Connectors, 2, 3 & 4 Way
Multiple-Band Frequency Range, Cellular, PCS, UMTS
50Watt Average Power
20dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Environment IP65
N type female connectors The Axell Wireless series of Low Power Splitters is designed to evenly split power cellular signals with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The device can be used with antennas, leaky cable systems and wireless base stations.
Part Number Frequency Band, MHz Split Insertion Loss dB Max
Split Loss, dB
Weight, g
90-851002 800-2500 2 0.3 3 240 90-851003 800-2500 3 0.5 4.8 420 90-851004 800-2500 4 0.4 6 600
Maximum VSWR 1.20:1 Average Power Rating 50W Minimum Isolation 20dB PIM, Passive IM -130dBc, 2x43dBm Impedance 50 Ohm Temperature Range -35ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium
or powder paint Connectors N (f) tri-plate DC transmission Between all ports
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 8 of 58 © Axell Wireless Ltd www.axellwireless.com
143.4
133.
4
9090-851013
3669.5 30.5
120
10
0
60
110
163.
4
120
60
LOW POWER SPLITTERS 800-2500MHz, 7/16 DIN Connectors, 2, 3 & 4 Way
Multiple-Band Frequency Range,
Cellular, PCS, UMTS
50Watt Average Power
20dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Environment IP65
7/16 DIN female connectors The Axell Wireless series of Low Power Splitters is designed to evenly split power cellular signals with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The device can be used with antennas, leaky cable systems and wireless base stations.
Part Number Frequency Band, MHz Split Insertion Loss dB Max
Split Loss, dB
Weight, g
90-851012 800-2500 2 0.3 3 820 90-851013 800-2500 3 0.5 4.8 1020 90-851014 800-2500 4 0.4 6 1330
Maximum VSWR 1.25:1 Average Power Rating 50W Minimum Isolation 20dB PIM, Passive IM -130dBc, 2x43dBm Impedance 50 Ohm Temperature Range -35ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium
or powder paint Connectors 7/16 DIN (f) tri-plate DC transmission Between all ports
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 9 of 58 © Axell Wireless Ltd www.axellwireless.com
121
141
28131
2828
Ø 4.5
109
73
63
90-851102
22
Ø 4.5
159
123
105
115
30
113
90-851103 110
22
30
LOW POWER SPLITTERS 700-2700MHz, N type Connectors, 2, 3 & 4 Way
Multiple-Band Frequency Range, Cellular,
PCS, UMTS
100Watt Average Power
20dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Environment IP65
N type female connectors The Axell Wireless series of Low Power Splitters is designed to evenly split power cellular signals with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The device can be used with antennas, leaky cable systems and wireless base stations.
Part Number
VSWR Split Isolation Typ.
Insertion Loss dB
Max
Split Loss dB
Power Combing
Reflected Power
Weightg
90-851102 1.25 2 20dB 0.4 3 0.5W 3W 240 90-851103 1.25 3 20dB 0.6 4.8 0.5W 3W 500 90-851104 1.30 4 20dB@800-2500MHz
18dB@700-2700MHz 0.6 6 0.5W 5W 620
Frequency 700 - 2700MHz Average Power Rating 50W PIM, Passive IM -130dBc, 2x43dBm Impedance 50 Ohm Temperature Range -35ºC to +75C Environment IP65, RoHS compliant Housing Passivated Aluminium
or powder paint Connectors N (f) tri-plate DC transmission between all ports
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 10 of 58 © Axell Wireless Ltd www.axellwireless.com
10
1
91
30
30
11
1
59 793069
LOW POWER SPLITTERS 800-2500MHz SMA Connectors, 2 & 3 Way
Multiple-Band Frequency Range,
Cellular, PCS, UMTS
50Watt Average Power
20dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
SMA Female Connectors This range of Low Power Wilkinson Splitters is designed to evenly split power cellular signals with minimal reflections or loss. The ultra wide frequency range allows use with multi-band antennas and leaky cable systems. These low cost splitters are designed for indoor applications.
Part Number Split Insertion Loss dB Max
Split Loss dB
Amp Balance, Max.
Phase Balance, Max
Weight, g
90-851022 2 0.3 3 ± 0.3dB ± 5 Degrees 200 90-851023 3 0.5 4.8 ± 0.3dB ± 5 Degrees 350
Frequency 800-2500MHz VSWR 1.25:1 Max. Average Power Rating 50W Isolation 20dB min Impedance 50 Ohm Temperature Range -35ºC to +75ºC Housing Passivated Aluminium
or powder paint Connectors SMA (f) tri-plate DC transmission between all ports
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 11 of 58 © Axell Wireless Ltd www.axellwireless.com
Ø 3.5
78
42
22
LOW POWER SPLITTERS 2000-4200MHz, N type Connectors, 2 Way
Multiple-Band Frequency Range
50Watt Average Power
Minimal RF Insertion Loss
High Reliability
RoHS Compliant
N type female connectors The Axell Wireless series of Low Power Splitters is designed to evenly split power cellular signals with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The device can be used with antennas, leaky cable systems and wireless base stations.
Part Number Frequency Band, MHz
Split Insertion Loss dB Weight, g
90-851802 2000 -4200 2 <3.4 250
Maximum VSWR 1.20:1 Average Power Rating 50W Minimum Isolation 20dB Impedance 50 Ohm Temperature Range -35ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium
or powder paint Connectors N (f) tri-plate DC transmission Between all ports
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 12 of 58 © Axell Wireless Ltd www.axellwireless.com
203.
00
158.00
138.00
24.00
2.00
90.0
056
.5010
1.50
14.00 14.0036.5
013
0.00
150.00
178.50
SPLITTER/COMBINERS 68-470MHz, N type Connectors, 2 Way
100Watt Average Splitting Power
Minimal RF Insertion Loss
High Reliability
RoHS Compliant
N type female connectors The Axell Wireless series of Splitter/Combiners is designed to evenly split RF signals with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. Can also be used as combiners.
Part Number Frequency Band, MHz
Split Insertion Loss dB Weight, g
05-009501 68 – 470 2 <3.4 650
Return Loss (All Ports) Input >18dB Output >20dB
Average Power Rating Splitting 100W Combining 10W
Minimum Isolation >19dB Impedance 50 Ohm Temperature Range -20ºC to +55ºC Environment IP65, RoHS compliant Housing Iridite NCP Connectors N type f
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 13 of 58 © Axell Wireless Ltd www.axellwireless.com
SPLITTER/COMBINERS 140-470MHz, N type or 7/16DIN Connectors, 2 Way
100Watt Average Splitting Power
Minimal RF Insertion Loss
High Reliability
RoHS Compliant
N type or 7/16DIN female connectors The Axell Wireless series of Splitter/Combiners is designed to evenly split RF signals with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. Can also be used as combiners.
Part Number Frequency Band, MHz
Split Typical Insertion Loss dB
Connectors
Weight, g
05-005701 140 - 470 2 3.5 7/16DIN f 700 05-005702 140 - 470 2 3.5 N type f 700
05-005701 05-005702
VSWR Better than 1.3:1
Average Power Rating Splitting 100W Combining 10W
Minimum Isolation >20 dB Impedance 50 Ohm Temperature Range -20ºC to +60ºC Environment IP65, RoHS compliant Housing Iridite NCP
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 14 of 58 © Axell Wireless Ltd www.axellwireless.com
24.0
15.0
59.0
0
44.5
89.0
SPLITTER/COMBINERS 88-2700MHz, Broadband, N type Connectors, 2 Way
100Watt Average Splitting Power
Minimal RF Insertion Loss
High Reliability
RoHS Compliant
N type female connectors The Axell Wireless series of Splitter/Combiners is designed to evenly split RF signals with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. Can also be used as combiners.
Part Number Frequency Band, MHz
Split Typical Insertion Loss dB Connectors
Weight, g
05-009802 88-960
1700-2700 2
≤3.5 for 88-960 MHz ≤4.6 for 1700-2700 MHz
N type f 800
Return Loss ≥13dB
Average Power Rating Splitting 100W Combining 10W
Minimum Isolation ≥15dB 150-960MHz; ≥16dB 1700-2700MHz
Impedance 50 Ohm Temperature Range -20ºC to +55ºC Environment IP65, RoHS compliant Housing Iridite NCP
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 15 of 58 © Axell Wireless Ltd www.axellwireless.com
169.00
14
9.0
0
26.00
153.00
4 MOUNTING HOLES 5.00 DIA.
159.00
70.0
0
SPLITTER/COMBINERS 140/470MHz, N type Connectors, 4 Way
100Watt Average Splitting Power
Minimal RF Insertion Loss
High Reliability
RoHS Compliant
N type female connectors The Axell Wireless series of Splitter/Combiners is designed to evenly split RF signals with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. Can also be used as combiners.
Part Number Frequency Band, MHz
Split Typical Insertion Loss dB
Connectors
05-009301 140 -470 4 6 ± 1 N type f
Return Loss >17dB all ports
Average Power Rating Splitting 100W Combining 10W
Typical Isolation 20dB Impedance 50 Ohm Temperature Range -20ºC to +60ºC Environment IP65, RoHS compliant Housing Iridite NCP
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 16 of 58 © Axell Wireless Ltd www.axellwireless.com
25 60.8
25 60.8
25 60.8
MULTI-BAND LOW LOSS REACTIVE POWER SPLITTERS 1700-2500MHz, N type Connectors, 2, 3 & 4 Way
Multiple-Band Frequency Range
300Watt Average Power
Low Insertion Loss
High Reliability
Environment IP65
N type female connectors The Axell Wireless series of High Power Splitters are designed to evenly split power cellular signals with minimal reflection and loss; the design employs no resistors eliminating their contribution to PIM. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole The wide frequency range allows use with multiple-band antennas and leaky cable systems and wireless base stations.
Part Number Frequency Band, MHz Split Split Loss, dB
Weight, g
90-851702 1700 - 2500 2 3 210 90-851703 1700 - 2500 3 4.8 245 90-851704 1700 - 2500 4 6 265
Maximum VSWR 1.2:1 Maximum Insertion Loss 0.1dB Average Power Rating 300W; 1.5kW peak PIM, Passive IM -150dBc, 2x43dBm Input Impedance 50 Ohm Temperature Range -35ºC to +75ºC Environment IP65, RoHS compliant Connectors N(f), Silver or tri-plate Housing Passivated Aluminium
or powder paint DC transmission Between all ports
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 17 of 58 © Axell Wireless Ltd www.axellwireless.com
25 60.8
25 60.8
205.3
235.6
25 60.8
25
90-851503
MULTI-BAND LOW LOSS REACTIVE POWER SPLITTERS 800-2500MHz, N type Connectors, 2, 3 & 4 Way
Multiple-Band Frequency Range, Cellular, PCS, UMTS
300Watt Average Power
Low Insertion Loss
High Reliability
Environment IP65
N type female connectors The Axell Wireless series of High Power Splitters are designed to evenly split power cellular signals with minimal reflection and loss; the design employs no resistors eliminating their contribution to PIM. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole The wide frequency range allows use with multiple-band antennas and leaky cable systems and wireless base stations.
Part Number Frequency Band, MHz Split Split Loss, dB
Weight, g
90-851502 800 - 2500 2 3 380 90-851503 800 - 2500 3 4.8 440 90-851504 800 - 2500 4 6 470
Maximum VSWR 1.2:1 Maximum Insertion Loss 0.1dB Average Power Rating 300W; 1.5kW peak PIM, Passive IM -150dBc, 2x43dBm Input Impedance 50 Ohm Temperature Range -35ºC to +75ºC Environment IP65, RoHS compliant Connectors N (f), Silver or tri-plate Housing Passivated Aluminium
or powder paint DC transmission Between all ports
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 18 of 58 © Axell Wireless Ltd www.axellwireless.com
8238
82
38
204
229.8
82
38
90-851512 38
MULTI-BAND LOW LOSS REACTIVE POWER SPLITTERS 800-2500MHz, 7/16 DIN Connectors, 2, 3 & 4 Way
Multiple-Band Frequency Range, Cellular, PCS, UMTS
700Watt Average Power
Low Insertion Loss
High Reliability
Environment IP65
7/16 DIN female connectors The Axell Wireless series of High Power Splitters are designed to evenly split power cellular signals with minimal reflection and loss; the design employs no resistors eliminating their contribution to PIM. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole The wide frequency range allows use with multiple-band antennas and leaky cable systems and wireless base stations.
Part Number Frequency Band, MHz Split Split Loss, dB
Weight, g
90-851512 800 - 2500 2 3 1040 90-851513 800 - 2500 3 4.8 1240 90-851514 800 - 2500 4 6 1350
Maximum VSWR 1.2:1 Maximum Insertion Loss 0.1dB Average Power Rating 700W; 1.5kW peak PIM, Passive IM -150dBc, 2x43dBm Input Impedance 50 Ohm Temperature Range -35ºC to +75ºC Environment IP65, RoHS compliant Connectors 7/16 DIN(f), Silver or tri-plate Housing Passivated Aluminium or
powder paint DC transmission Between all ports
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 19 of 58 © Axell Wireless Ltd www.axellwireless.com
195.9
210.4
25 60.8
25
90-851602
25 60.8
25 60.8
MULTI-BAND LOW LOSS REACTIVE POWER SPLITTERS 700-2700MHz, N type Connectors, 2, 3 & 4 Way
Super Wideband Frequency Range,
Cellular, PCS, UMTS & WiFi
500Watt Average Power
Low Insertion Loss
High Reliability
Environment IP65
N type female connectors This super wideband range of Axell Wireless High Power Splitters are designed to evenly split power cellular signals with minimal reflection and loss; the design employs no resistors eliminating their contribution to PIM. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The ultra wide frequency range allows use with multiple-band antennas and leaky cable systems and wireless base stations.
Part Number VSWR Split Split Loss, dB
Weight, g
90-851602 <1.20 2 3 380 90-851603 <1.25 3 4.8 420 90-851604 <1.30 4 6 460
Frequency Band 700 - 2700 MHz Maximum Insertion Loss 0.1dB Average Power Rating 500W; 3kW peak PIM, 3rd Order -150dBc@2x43dBm Input Impedance 50 Ohm Temperature Range -35ºC to +75ºC Environment IP65, RoHS compliant Connectors N(f), Silver or tri-plate Housing Passivated Aluminium
or powder paint DC transmission Between all ports
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 20 of 58 © Axell Wireless Ltd www.axellwireless.com
25 61
25
294
264
25 61
25
294
264
283
269
25 61
25
90-859002
90-859003
90-859004
MULTI-BAND LOW LOSS REACTIVE POWER SPLITTERS 380-2700MHz N type Connectors, 2, 3 & 4 Way
Super Wideband Band Frequency Range
300Watt Power Rating
Low Insertion Loss
High Reliability
Environment IP65
N-female Connectors These super wideband High Power Splitter are designed to evenly split power cellular signals with minimal reflections or loss. Its reactive design employs no resistors eliminating their contribution to PIM. Designed with only screw joints and an air dielectric, the PIM and loss has been minimized and reliability enhanced. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The ultra wide frequency range allows use with multiple-band antennas and leaky cable systems and wireless base stations.
Part Number VSWR Split Split Loss, dB Dissipative Loss Weight, g 90-859002 <1.20 2 3 0.1dB 530 90-859003 <1.25 3 4.8 0.2dB 560 90-859004 <1.30 4 6 0.3dB 590
Frequency Band 380 – 2700 MHz Power Rating 300W; 3KW peak PIM, 3rd Order -150dBc@2x43dBm Input Impedance 50 ohm Temperature –35º ºC to +75º ºC Environment IP65, RoHS compliant Finish: Connectors N(f), Silver or tri-plate Housing Passivated Aluminium or
powder paint DC transmission Between all ports Mounting: Bracket for wall mounting included in the scope of supply.
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 21 of 58 © Axell Wireless Ltd www.axellwireless.com
25 61
DUAL-BAND LOW LOSS REACTIVE POWER SPLITTERS 300-960MHz N type Connectors, 2 Way
Dual-Band Frequency Range, TETRA & Cellular
300Watt Average Power
Low Insertion Loss
High Reliability
Environment IP65
N-female Connectors These two-way High Powers Splitters are designed to evenly split power cellular signals with minimal reflection and loss; the design employs no resistors eliminating their contribution to PIM. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The wide frequency range covering 300 - 960MHz allows use with multiple-band antennas and leaky cable systems.
Part Number Frequency Band, MHz Split Split Loss, dB Weight, g 90-851902 300-960 2 3 380
Maximum VSWR 1.35:1 Maximum Insertion Loss 0.1dB Average Power Rating 300W; 1.5kW peak PIM, Passive IM -150dBc, 2x43dBm Input Impedance 50 Ohm Temperature Range -35ºC to +75ºC Environment IP65, RoHS compliant Connectors N (f), Silver or tri-plate Housing Passivated Aluminium
or powder paint DC transmission Between all ports
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 22 of 58 © Axell Wireless Ltd www.axellwireless.com
8238
DUAL-BAND LOW LOSS REACTIVE POWER SPLITTERS 300-960MHz, 7/16 DIN Connectors, 2 Way
Dual-Band Frequency Range, TETRA & Cellular
700Watt Average Power
Low Insertion Loss
High Reliability
Environment IP65
7/16 DIN-female Connectors These two-way High Powers Splitters are designed to evenly split power cellular signals with minimal reflection and loss; the design employs no resistors eliminating their contribution to PIM. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The wide frequency range covering 300 - 960MHz allows use with multiple-band antennas and leaky cable systems.
Part Number Frequency Band, MHz Split Split Loss, dB Weight, g 90-851912 300-960 2 3 1100
Maximum VSWR 1.35:1 Maximum Insertion Loss 0.1dB Average Power Rating 700W; 1.5kW peak PIM, Passive IM -150dBc, 2x43dBm Input Impedance 50 Ohm Temperature Range -35ºC to +75ºC Environment IP65, RoHS compliant Connectors 7/16 DIN (f), tri-plate Housing Passivated Aluminium
or powder paint DC transmission Between all ports
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 23 of 58 © Axell Wireless Ltd www.axellwireless.com
50
68
DIRECTIONAL COUPLERS 120-240MHz, 6 & 10dB, N type Connectors
Low Loss Stripline Couplers
200Watt Average Main Line Power
20dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Environment IP65
N type female connectors Axell Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency
Band, MHz Coupling,
dB Mainline Loss,
dB Max. Insertion Loss,
dB Max. Reflected Power,
W Max. Weight,
g 90-852506 120 - 240 -6±1.0 1.7 0.20 40 430 90-852510 120 - 240 -10±1.0 0.8 0.20 100 430
90-852506 & 90-852510
VSWR 1.20:1 Max., All Ports Minimum Isolation 20dB Average Power Rating 200W; 1.5kW peak Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or
powder paint Connectors N (f), tri-plate DC transmission Between input and output only
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 24 of 58 © Axell Wireless Ltd www.axellwireless.com
37
54.8
DIRECTIONAL COUPLERS 300-500MHz, 6 to 30dB, N type Connectors
Low Loss Stripline Couplers
200Watt Average Main Line Power
20dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Environment IP65
N type female connectors Axell Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency
Band, MHz Coupling,
dB Mainline Loss,
dB Max. Insertion Loss,
dB Max. Reflected Power,
W Max. Weight,
g 90-852306 300 - 500 -6±1.0 1.7 0.20 40 440 90-852310 300 - 500 -10±1.0 0.8 0.20 100 440 90-852315 300 - 500 -15±1.0 0.4 0.20 200 440 90-852320 300 - 500 -20±1.0 0.22 0.20 200 440 90-852330 300 - 500 -30±1.0 0.20 0.20 200 440
90-8523xx, typical outline
VSWR 1.20:1 Max., All Ports Minimum Isolation 20dB Average Power Rating 200W; 1.5kW peak Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or
powder paint Connectors N (f), tri-plate DC transmission Between input and output only
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 25 of 58 © Axell Wireless Ltd www.axellwireless.com
31
49
26
35
53
30
DIRECTIONAL COUPLERS 300-960MHz, 6 to 30dB, N type Connectors
Low Loss Stripline Couplers
200Watt Average Main Line Power
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65
N type female connectors Axell Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency
Band, MHz Coupling,
dB Mainline
Loss, dB Max.
Insertion Loss,
dB Max.
Typical Output
Isolation
Reflected Power, W Max.
Weight, g
90-852406 300 - 960 -6±1.0 1.7 0.25 26dB, 40 400 90-852410 300 - 960 -10±1.0 0.8 0.25 30dB 100 400 90-852415 300 - 960 -15±1.0 0.6 0.20 30dB 200 400 90-852420 300 - 960 -20±1.0 0.5 0.20 30dB 200 400 90-852430 300 - 960 -30±1.0 0.4 0.20 30dB 200 440
90-852406/10/15/20 90-852430
VSWR 1.20:1 Max., All Ports Average Power Rating 200W; 1.5kW peak PIM, Passive IM -140dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or
powder paint Connectors N (f), tri-plate DC transmission Between input and output only
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 26 of 58 © Axell Wireless Ltd www.axellwireless.com
37
54.8
37
54
.8
DIRECTIONAL COUPLERS 800-2500MHz, 5 to 30dB, N type Connectors
Low Loss Stripline Couplers
Multiple-Band Frequency Range, Cellular, PCS, UMTS
200Watt Average Main Line Power
20dB Directivity, Min
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65 Axell Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency
Band, MHz Coupling,
dB Mainline Loss
dB Max. Insertion Loss
dB Max. Reflected
Power W Max.
Weight g
90-852005 800 - 2500 -5±0.8 2.3 0.25 30 300 90-852006 800 - 2500 -6±0.8 1.7 0.25 40 300 90-852007 800 - 2500 -7±0.8 1.5 0.25 50 300 90-852008 800 - 2500 -8±0.8 1.2 0.25 70 300 90-852010 800 - 2500 -10±1.0 0.8 0.20 100 300 90-852013 800 - 2500 -13±1.0 0.5 0.20 200 300 90-852015 800 - 2500 -15±1.0 0.4 0.20 200 300 90-852020 800 - 2500 -20±1.0 0.22 0.20 200 300 90-852025 800 - 2500 -25±1.0 0.20 0.20 200 350 90-852030 800 - 2500 -30±1.0 0.20 0.20 200 350
90-8520xx typical outline 25 &30dB version typical outline
VSWR 1.20:1 Max., All Ports Directivity 20dB Min. Average Power Rating 200W; 1.5kW peak PIM, Passive IM -140dBc, 2x43dBm
< -150dBc to special order Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or
powder paint Connectors N (f), tri-plate DC transmission Between input and output only
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 27 of 58 © Axell Wireless Ltd www.axellwireless.com
65.7
4435.6
65.7
4435.6
DIRECTIONAL COUPLERS 800-2500MHz, 5 to 30dB, 7/16 DIN Connectors
Low Loss Stripline Couplers
Multiple-Band Frequency Range, Cellular, PCS, UMTS
200Watt Average Main Line Power
20dB Directivity, Min
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65 Axell Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency
Band, MHz Coupling,
dB Mainline Loss dB
Max.
Insertion Loss dB Max.
Reflected Power W Max.
Weight g
90-852105 800 - 2500 -5±0.8 2.3 0.25 30 720 90-852106 800 - 2500 -6±0.8 1.7 0.25 40 720 90-852107 800 - 2500 -7±0.8 1.5 0.25 50 720 90-852108 800 - 2500 -8±0.8 1.2 0.25 70 720 90-852110 800 - 2500 -10±1.0 0.8 0.20 100 720 90-852113 800 - 2500 -13±1.0 0.5 0.20 200 720 90-852115 800 - 2500 -15±1.0 0.4 0.20 200 720 90-852120 800 - 2500 -20±1.0 0.22 0.20 200 720 90-852125 800 - 2500 -25±1.0 0.20 0.20 200 850 90-852130 800 - 2500 -30±1.0 0.20 0.20 200 850
90-8521xx typical outline 25 &30dB version typical outline
VSWR 1.20:1 Max., All Ports Directivity 20dB Min. Average Power Rating 200W; 1.5kW peak PIM, Passive IM -140dBc, 2x43dBm
< -150dBc to special order Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or
powder paint Connectors 7/16 DIN tri-plate DC transmission Between input and output only
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 28 of 58 © Axell Wireless Ltd www.axellwireless.com
37 54
.8
DIRECTIONAL COUPLERS 700-2700MHz, 5 to 20dB, N type Connectors
Low Loss Stripline Couplers
Multiple-Band Frequency Range, Cellular, PCS, UMTS
200Watt Average Main Line Power
20dB Directivity, Min
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65
N type female connectors Axell Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency
Band, MHz Coupling,
dB Mainline Loss
dB Max. Insertion Loss dB
Max. Reflected
Power W Max.
Weight g
90-852205 700 - 2700 -5±0.8 2.3 0.25 30 300 90-852206 700 - 2700 -6±0.8 1.7 0.25 40 300 90-852207 700 - 2700 -7±0.8 1.5 0.25 50 300 90-852208 700 - 2700 -8±0.8 1.2 0.25 70 300 90-852210 700 - 2700 -10±1.0 0.8 0.20 100 300 90-852213 700 - 2700 -13±1.0 0.5 0.20 200 300 90-852215 700 - 2700 -15±1.0 0.4 0.20 200 300 90-852220 700 - 2700 -20±1.0 0.22 0.20 200 300
90-8522xx typical outline
VSWR 1.25:1 Max., All Ports Directivity 20dB Min. Average Power Rating 200W; 1.5kW peak PIM, Passive IM -140dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or
powder paint Connectors N (f), tri-plate DC transmission Between input and output only
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 29 of 58 © Axell Wireless Ltd www.axellwireless.com
58.3
40.5
DIRECTIONAL COUPLERS 700-2700MHz, 20 & 30dB Tap
Low Loss Stripline Couplers
Multiple-Band Frequency Range,
Cellular, PCS, UMTS
200Watt Average Main Line Power
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65 These Directional Couplers are used for indoor/outdoor applications covering all the wireless services from 800 to 2500MHz. Units couple off a defined fraction of signal with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency
Band, MHz Coupling,
dB Mainline Loss
dB Max. Insertion Loss
dB Max. Reflected Power
W Max. Weight
g 90-852620 700 - 2700 -20±1.0 0.22 0.20 200 750 90-852630 700 - 2700 -30±1.0 0.20 0.20 200 750
Typical outline, 20dB and 30dB versions
VSWR 1.25:1 Max., All Ports Isolation 20dB Min. Average Power Rating 200W; 1.5kW peak PIM, 3rd IMD -140dBc@2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Interface Input 7/16 DIN Female
Output 7/16 DIN Female Coupling N Female
Environment IP65, RoHS compliant Housing Passivated Aluminium
or powder paint Connectors Tri-plate DC transmission Between input and output only
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 30 of 58 © Axell Wireless Ltd www.axellwireless.com
154
180
144
Ø 4.6
23
DIRECTIONAL COUPLERS 380-2700MHz, 6, 10, 15, 20 & 30dB Tap
Low-Loss Stripline Coupler
200Watt Average Main Line Power
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65
N or 7/16 DIN Female Connectors This series of Directional Couplers is a stripline design for indoor/outdoor applications covering all the wireless services from 380 to 2700MHz. Units couple off a defined fraction of signal with minimal reflections or loss. All of them conform IP65 specification. Its mechanical shape allows to be fixed on the wall or the pole easily. The ultra wide frequency range allows use with multi-band antennas and leaky cable systems and wireless base stations Part Number Coupling,
dB Insertion Loss
dB Max. Isolation dB Reflected Power
W Max. Weight g Connectors
90-952706 6 ±1.0 1.8 20dB 40 390 90-952710 10 ±1.0 0.9 20dB 100 390 90-952715 15 ±1.0 0.4 20dB 200 390 90-952720 20 ±1.0 0.3 20dB 200 390 90-952730 30 ±1.5 0.2 30dB 200 390
N (f), tri-plate
90-852906 6 ±1.0 1.8 20dB 40 890 90-852910 10 ±1.0 0.9 20dB 100 890 90-852915 15 ±1.0 0.4 20dB 200 890 90-852920 20 ±1.0 0.3 20dB 200 890 90-852930 30 ±1.5 0.2 30dB 200 890
7/16 DIN tri-plate
Typical outline, 90-9527xx Typical outline, 90-95xxxx
Frequency Band, MHz 380 - 2700MHz VSWR 1.3:1 Max., All Ports Power Rating 200W, avg.; 1.5KW peak PIM, Passive IM -140dBc, 2x43dBm Impedance 50 ohm, nominal Operating Temperature Range -25º to +75ºC Environment: IP65, RoHS compliant
Housing Passivated Aluminium or powder paint
DC capability: DC transmission only between input and output
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 31 of 58 © Axell Wireless Ltd www.axellwireless.com
DIRECTIONAL COUPLERS 140/470MHz, 6 & 10dB Tap
Low-Loss Stripline Coupler
100W Average Main Line Power
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65
7/16DIN Female Connectors Axell Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency
Band, MHz Coupling,
dB Power Rating
W Max. Insertion Loss
dB Max. VSWR Weight
kg 07-010401 100 - 470 6 ±1.0 100 1.6 Better than 1.3:1 1.5 07-010402 100 - 470 10±1.0 100 0.8 Better than 1.3:1 1.5
Typical outline, 6dB and 10dB versions
Impedance 50 Ohms Connectors 7/16 DIN Female Operating Temperature Range -20°C to +55°C Operating Humidity Range 0 to 95% non-condensing Environmental IP65 Mechanical Wall mount Finish Iridite NCP MTBF >180000 hours
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 32 of 58 © Axell Wireless Ltd www.axellwireless.com
DIRECTIONAL COUPLERS 140/470MHz, 10 & 30dB Tap
Low-Loss Stripline Coupler
100W Average Main Line Power
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65
N Female Connectors Axell Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency Band,
MHz Coupling, dB Power Rating
W Max. Insertion Loss dB
Typical. VSWR Weight
kg 07-010902 100 - 470 10±0.5 100 0.7 1.3:1 0.8 07-010905 100 - 470 30±0.5 100 0.3 1.3:1 0.8
Typical outline, 10dB and 30dB versions
Impedance 50 Ohms Connectors ‘N’ female Operating Temperature Range -20 to +60°C Operating Humidity Range 0 to 95% non-condensing Environmental IP65 Mechanical Wall mount Finish Iridite NCP MTBF >180000 hours
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 33 of 58 © Axell Wireless Ltd www.axellwireless.com
27.0
0
35.0
0
57.0
024
.00
DIRECTIONAL COUPLERS 150/2200MHz, 6, 10, 15, 20 & 30dB Tap
Low-Loss Stripline Coupler
100W Average Main Line Power
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65
N Female Connectors Axell Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency Band,
MHz Coupling, dB Power Rating
W Max. Insertion Loss dB
Typical. VSWR Weight
kg 07-014002 150 - 2200 6 +2/-1 100 ≤ 2.1 1.3:1 0.8 07-014001 150 - 2200 10 ± 2.5 100 ≤ 0.9 1.3:1 0.8 07-014003 150 - 2200 15 ± 1.5 100 ≤ 0.6 1.3:1 0.8 07-014004 150 - 2200 20 ±2.0 100 ≤ 0.4 1.3:1 0.8 07-014006 150 - 2200 30 ± 1.0 100 ≤ 0.3 1.3:1 0.8
Impedance 50 Ohms Connectors ‘N’ female Operating Temperature Range -20 to +55°C Operating Humidity Range 0 to 95% non-condensing Environmental IP65 Mechanical Wall mount Finish Iridite NCP MTBF >180000 hours
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 34 of 58 © Axell Wireless Ltd www.axellwireless.com
52.0
89.0
104.
0
17.0
0
32.0
40.0
0
DIRECTIONAL COUPLERS 70/1000MHz, 6, 10, 15, 20 & 30dB Tap
Low-Loss Stripline Coupler
100W Average Main Line Power
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65
N Female Connectors Axell Wireless series of Directional Couplers utilizes a stripline design for indoor and outdoor applications. Units couple off a defined fraction of signal with minimal reflections or loss. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency Band,
MHz Coupling, dB Power Rating
W Max. Insertion Loss dB
Typical. VSWR Weight
kg 07-018001 70 - 1000 6 +2/-1 100 ≤ 2.1 1.5:1 0.8 07-018002 70 - 1000 10 ± 2.0 100 ≤ 1.2 1.3:1 0.8 07-018003 70 - 1000 15 ± 2.0 100 ≤ 1.2 1.3:1 0.8 07-018004 70 - 1000 20 ±2.0 100 ≤ 1.0 1.34:1 0.8 07-018005 70 - 1000 30 ±2.0 100 ≤ 1.0 1.34:1 0.8
Impedance 50 Ohms Connectors ‘N’ female Operating Temperature Range -20 to +55°C Operating Humidity Range 0 to 95% non-condensing Environmental IP65 Mechanical Wall mount Finish Iridite NCP MTBF >180000 hours
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 35 of 58 © Axell Wireless Ltd www.axellwireless.com
50
38
87
150
23
194.2
DIRECTIONAL COUPLERS Dual Directional 30dB Coupler 824-2170MHz
500Watt Average Main Line Power
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65
DIN Female Connectors/N Tap off The dual Directional Coupler is a airline design for indoor/outdoor applications covering all the wireless services from 824 to 2170MHz. This design offers RF power ratings of 500 watts with minimal reflections or loss. The units conform to IP65 specification and its mechanical configuration allows it to be easily fixed onto a wall or a mast or pole. This coupler is ideal for antenna power monitoring applications in base station installations.
Part Number Frequency Band MHz
Coupling, dB Insertion Loss dB
Directivity Weight g
90-852830 824 - 2170 -30 ± 0.4 @ 824-960MHz -30 ± 0.5 @ 1710-2170MHz
<0.1 >20dB (typical > 30 dB)
1000
Input and Output , <1.15 VSWR
Coupled Ports, <1.20 Power Rating 500W, avg.; 3KW peak PIM, Passive IM -150dBc, 2x43dBm Impedance 50 ohm, nominal Temperature Range -25 to +75°C Environment IP65, RoHS compliant
Housing Passivated Aluminum or powder paint
Interface Input 7/16 DIN Female Output 7/16 DIN Female Coupling N Female
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 36 of 58 © Axell Wireless Ltd www.axellwireless.com
51 87
3 dB HYBRID COUPLER/COMBINERS 120 to 240MHz, N type Connectors, 30dB Minimum Isolation
200Watt Average Power Rating
30dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Environment IP65
N type female connectors Axell Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service supplier to a single antenna or distribution cable. This requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units conform to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations.
Part Number. Frequency Range, MHz Input Isolation dB Min.
Insertion Loss dB Max.
Power Rating W avg.
Weight g.
90-853006 120 - 240 30 0.2 200 700
VSWR 1.20:1 Max. All Ports Coupling 3dB, nominal Coupling Variation ±0.5dB Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or
powder paint Connectors N (f), tri-plate DC transmission Between cross ports only
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 37 of 58 © Axell Wireless Ltd www.axellwireless.com
35
70.
6
3 dB HYBRID COUPLER/COMBINERS 300-500MHz, N type Connectors, 35dB Isolation, Minimum
200Watt Average Power Rating
35dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Environment IP65
N type female connectors Axell Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service supplier to a single antenna or distribution cable. This requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units conform to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations.
Part Number Frequency Range, MHz Input Isolation dB Min.
Insertion Loss dB Max.
Power Rating W avg.
Weight g.
90-853004 300 - 500 35 0.2 200 480
VSWR 1.20:1 Max. All Ports Coupling 3dB, nominal Coupling Variation ±0.4dB Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or
powder paint Connectors N (f), tri-plate DC transmission Between cross ports only
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 38 of 58 © Axell Wireless Ltd www.axellwireless.com
40 76
3 dB HYBRID COUPLER/COMBINERS 300-960MHz, N type Connectors, 23dB Minimum Isolation
120Watt Average Power Rating
23dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65
N type female connectors Axell Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service supplier to a single antenna or distribution cable. This requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units conform to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations.
Part Number Frequency Range, MHz Input Isolation dB Min.
Insertion Loss dB Max.
Power Rating W avg.
Weight g.
90-853005 300 - 960 23 0.2 120 610
VSWR 1.2:1 Max. All Ports Coupling 3.1dB, ±0.2dB Frequency Sensitivity ±0.3dB PIM, Passive IM -140dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or
powder paint Connectors N (f), tri-plate VSWR 1.2:1 Max. All Ports DC transmission Between cross ports only
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 39 of 58 © Axell Wireless Ltd www.axellwireless.com
55
88
24
30 6676
Ø 4
55
95
37
37 80
.4
76
Ø 4
3 dB HYBRID COUPLER/COMBINERS 800-960MHz, N type or 7/16 DIN Connectors, 35dB Minimum Isolation,
200Watt Average Power Rating
35dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65
N type or 7/16 DIN female connectors Axell Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service supplier to a single antenna or distribution cable. This requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units conform to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency Range,
MHz Input Isolation
dB Min. Insertion Loss
dB Max. Power Rating W avg.
Weight g.
Connector
90-853007 800 - 960 35 0.2 200 230 N type 90-853017 800 - 960 35 0.2 200 640 7/16 DIN
90-853007 90-853017
VSWR 1.20:1 Max. All Ports Coupling 3dB, nominal Coupling Variation ±0.3dB PIM, Passive IM -140dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant
Housing Passivated Aluminium or powder paint
Connectors N (f) or 7/16 DIN tri-plate DC transmission Between cross ports only
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 40 of 58 © Axell Wireless Ltd www.axellwireless.com
40 76 47
90
MULTI-BAND HYBRID COUPLER/COMBINERS 800-2500MHz, N or 7/16 DIN Connectors, 25dB Minimum Isolation
Multiple-Band Frequency Range, Cellular, PCS, UMTS
120Watt Average Power Rating
25dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65
N type or 7/16 DIN female connectors Axell Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service supplier to a single antenna or distribution cable. This requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units conform to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency
Range, MHz Input Isolation
dB Min. Insertion Loss
dB Max. Power Rating
W avg. Weight
g. Connector
90-853001 800 - 2500 25 0.25 120 420 N type 90-853011 800 - 2500 25 0.25 120 840 7/16 DIN
90-853001 90-853011
VSWR 1.20:1 Max. All Ports Coupling 3.1±0.2dB Coupling Variation ±0.3dB PIM, Passive IM -140dBc, 2x43dBm
< -150dBc to special order Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or
powder paint Connectors N (f), 7/16 DIN tri-plate DC transmission Between cross ports only
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 41 of 58 © Axell Wireless Ltd www.axellwireless.com
40 76
MULTI-BAND HYBRID COUPLER/COMBINERS 700-2700MHz, N type Connectors, 22dB Minimum Isolation
Ultra Wide Frequency Band
120Watt Average Power Rating
22dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65
N type female connectors Axell Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service supplier to a single antenna or distribution cable. This requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units conform to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations.
Part Number Frequency Range, MHz Input Isolation dB Min.
Insertion Loss dB Max.
Power Rating W avg.
Weight g.
90-853002 700 - 2700 22 0.25 120 420
VSWR 1.20:1 Max. All Ports Coupling 3.1±0.6dB PIM, Passive IM -140dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or
powder paint Connectors N (f) DC transmission Between cross ports only
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 42 of 58 © Axell Wireless Ltd www.axellwireless.com
MULTI-BAND HYBRID COUPLER/COMBINERS 1710-2200MHz, N or 7/16 DIN Connectors, 30dB Minimum Isolation
200Watt Average Power Rating
30dB Isolation, Min
Minimal RF Insertion Loss
High Reliability
Indoor Application
N type or 7/16 DIN female connectors Axell Wireless series of 3dB Hybrid Couplers is designed to meet the specialized requirements of the wireless market. It can combine two channels from different service supplier to a single antenna or distribution cable. This requires the termination of one output port with a 50 Ohm load and results in a 3dB loss in each signal. In situations where two similar feeds are required, for example an in-building application, both outputs may be used, eliminating the need for a termination and the 3dB loss. All units conform to IP65 specification. These devices are suitable for use with antennas and leaky cable systems and wireless base stations. Part Number Frequency Range,
MHz Input
Isolation dB Min.
Insertion Loss dB Max.
Power Rating W avg.
Weight g.
Connectors
90-853003 1710 - 2200 30 0.2 200 300 N type 90-853013 1710 - 2200 30 0.2 200 790 7/16 DIN
90-853003 90-853013
VSWR 1.15:1 Max. All Ports Coupling 3.1dB, nominal Coupling Variation ±0.3dB Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment Indoor Application Housing Passivated Aluminium or
powder paint Connectors N (f) or 7/16 DIN tri-plate DC transmission Between cross ports only
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 43 of 58 © Axell Wireless Ltd www.axellwireless.com
27.9
9
1.0
7
25.8
4
CROSSBAND COUPLERS/DIPLEXERS 500/800MHz, N or 7/16 DIN Connectors, 50dB Minimum Isolation
High isolation
Low insertion loss
Good VSWR
Low intermodulation
Sealed to IP65 as standard The Axell Wireless range of Diplexers and crossband couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters - either bandpass or highpass/lowpass - these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs, in applicable situations. Suitable for use in: Transmitter / Dual Band Networks, In-building and Common Antenna Sharing Systems.
Part Number Frequency Range,
MHz
Isolation dB Min.
Insertion Loss
dB Max.
Approx Weight g
Power Rating W cw.
Connectors
07-004810 0-500
800-2200 > 50 dB 0-500MHz
> 50 dB 800-2170MHz 0.5 580 100 N type f
07-005302 0-500
800-2200 > 50 dB 0-500MHz
> 50 dB 800-2170MHz 0.5 750 100 7/16 DIN f
07-004810 07-005302
Impedance 50 Ohm, nominal
VSWR 1.3:1 800-960 MHz 1.4:1 1710-2170 MHz
Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Housing Aluminium finished to RAL7035
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 44 of 58 © Axell Wireless Ltd www.axellwireless.com
83.0
016
.00
CROSSBAND COUPLERS/DIPLEXERS 490/650MHz, N Connectors, 40dB Minimum Isolation
High isolation
Low insertion loss
Good VSWR
Low intermodulation
Sealed to IP65 as standard The Axell Wireless range of Diplexers and crossband couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters - either bandpass or highpass/lowpass - these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs, in applicable situations. Suitable for use in: Transmitter / Dual Band Networks, In-building and Common Antenna Sharing Systems.
Part Number Frequency Range, MHz
Isolation dB Min.
Insertion Loss
dB Max.
Approx Weight g
Power Rating W cw.
Connectors
07-019301 50-490
650-2200 > 40 dB 50-490 MHz
> 40 dB 800-2200 MHz 0.5* 500 100 N type f
*(on edge of passband)
Impedance 50 Ohm, nominal
VSWR
1.5:1 LOW 50-200 MHz 1.3:1 LOW 200-490 MHz 1.3:1 LOW 650-960 MHz 1.5:1 HIGH 1700-2200 MHz
Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Housing Aluminium finished to RAL7035
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 45 of 58 © Axell Wireless Ltd www.axellwireless.com
CROSSBAND COUPLERS/DIPLEXERS 108/143MHz, N Connectors, Isolation >30dB
High isolation
Low insertion loss
Good VSWR
Low intermodulation
Sealed to IP65 as standard The Axell Wireless range of Diplexers and crossband couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters - either bandpass or highpass/lowpass - these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs, in applicable situations. Suitable for use in: Transmitter / Dual Band Networks, In-building and Common Antenna Sharing Systems. Part Number Frequency
Range, MHz Isolation dB Min.
Insertion Loss dB Max.
Approx Weight g Power Rating W cw.
Connectors
07-005716 0 - 108
143 - 500 >30dB 0.5 600 100 N type f
Impedance 50 Ohm, nominal VSWR 1.3:1 Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Housing Aluminium finished to RAL7035
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 46 of 58 © Axell Wireless Ltd www.axellwireless.com
CROSSBAND COUPLERS/DIPLEXERS 250/380MHz, N Connectors, Isolation >30dB
High isolation
Low insertion loss
Good VSWR
Low intermodulation
Sealed to IP65 as standard The Axell Wireless range of Diplexers and crossband couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters - either bandpass or highpass/lowpass - these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs, in applicable situations. Suitable for use in: Transmitter / Dual Band Networks, In-building and Common Antenna Sharing Systems. Part Number Frequency
Range, MHz Isolation dB Min.
Insertion Loss dB Max.
Approx Weight g Power Rating W cw.
Connectors
07-005736 0 - 250
380 - 500 >50dB 0.5 600 100 N type f
Impedance 50 Ohm, nominal VSWR 1.3:1 Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Housing Aluminium finished to RAL7035
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 47 of 58 © Axell Wireless Ltd www.axellwireless.com
23.5
40.0
20.3
63.5
3.5
80.0
0
87.0
0
CROSSBAND COUPLERS/DIPLEXERS 400/440MHz, 7/16DIN Connectors, Isolation >30dB
High isolation
Low insertion loss
Good VSWR
Low intermodulation
Sealed to IP65 as standard The Axell Wireless range of Diplexers and crossband couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters - either bandpass or highpass/lowpass - these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs, in applicable situations. Suitable for use in: Transmitter / Dual Band Networks, In-building and Common Antenna Sharing Systems. Part Number Frequency
Range, MHz Isolation dB Min.
Insertion Loss dB Max.
Approx Weight g
Power Rating W cw.
Connectors
07-005807 70 - 400 440 - 470
>30dB 1.0 * 600 50 7/16DIN f
*(on edge of passband)
Impedance 50 Ohm, nominal
VSWR 1.5:1 LOW 70 - 200MHz 1.3:1 LOW 380 - 400MHz 1.3:1 HIGH 440 - 470MHz
Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Housing Aluminium finished to RAL7035
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 48 of 58 © Axell Wireless Ltd www.axellwireless.com
CROSSBAND COUPLERS/DIPLEXERS 1000/1700MHz, N type Connectors, Isolation >50dB
High isolation
Low insertion loss
Good VSWR
Low intermodulation
Sealed to IP65 as standard The Axell Wireless range of Diplexers and crossband couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters - either bandpass or highpass/lowpass - these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs, in applicable situations. Suitable for use in: Transmitter / Dual Band Networks, In-building and Common Antenna Sharing Systems.
Part Number
Frequency Range, MHz
Isolation dB Min.
Insertion Loss dB Max.
Approx Weight g
Power Rating W cw.
Connectors
07-004302 0-1000
1700-2200 >50dB
<0.3dB 0 – 1000MHz <0.5dB - 1700-2200 MHz
600 200 N type f
Impedance 50 Ohm, nominal VSWR 1.3:1 Temperature Range -20 to +55°C Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Housing Aluminium finished to RAL7035
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 49 of 58 © Axell Wireless Ltd www.axellwireless.com
17.60
20.5
0
17.60
20.5
059
.50
100.00
75.0
029
.50
4x 4.50 - THRUMOUNTING HOLES
88.00
108.00
83.
00
82.00
77.0
0
4xM3x0.5 - 6H - 8.00DEEP
16.0
0
= 83.00 =2xM3x0.5 - 6H - 8.00DEEPSAME ON OPPSITE SIDE
CO
MB
INE
D
LOW
HIG
H
CROSSBAND COUPLERS/DIPLEXERS 2170/2400MHz, N type Connectors, Isolation >40dB
High isolation
Low insertion loss
Good VSWR
Low intermodulation
Sealed to IP65 as standard The Axell Wireless range of Diplexers and crossband couplers offers a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters - either bandpass or highpass/lowpass - these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs, in applicable situations. Suitable for use in: Transmitter / Dual Band Networks, In-building and Common Antenna Sharing Systems.
Part Number
Frequency Range, MHz
Isolation dB Min.
Insertion Loss dB Typical.
Approx Weight g
Power Rating W cw.
Connectors
07-015701 800 - 2170 2400 - 2500
>40dB 0.5dB 800 - 960 MHz
1.0dB 1710 - 2170 MHz 1.0dB 2400 - 2500 MHz
580 100 N type f
Impedance 50 Ohm, nominal
VSWR (Typical) 1.3:1 LOW 800-960 MHz 1.5:1 LOW 1710-2170 MHz 1.5:1 HIGH 2400-2500 MHz
Temperature Range -20 to +55°C Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Housing Aluminium finished to RAL7035
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 50 of 58 © Axell Wireless Ltd www.axellwireless.com
THESE FIXINGS REPEATED ON OPPOSITE FACE
84.00
103.
00
41.00
20.4
0
84.00
135.00
800 - 1000 COMBINED
1710 - 2170
M3x8 FIXINGS IN 8 PLACES4 OFF FIXINGS 7.0 DIA
122.00
110.00
110
.00
98.0
0
CROSSBAND COUPLERS/DIPLEXERS 1000/1710MHz, 7/16DIN Connectors, Isolation >47dB
High isolation
Low insertion loss
Good VSWR
Low intermodulation
Sealed to IP65 as standard The Axell Wireless range of Crossband Couplers and Diplexers offer a compact solution to allow the co-siting of two different frequency bands on to one common output. Designed using high performance filters - either bandpass or highpass/lowpass - these units provide excellent inter-band isolation, low insertion loss and good intermodulation performance. By using crossband couplers it is possible to reduce feeder cable requirement by 50%, thereby reducing rigging and tower rental costs, in applicable situations. Suitable for use in: Transmitter / Dual Band Networks, In-building and Common Antenna Sharing Systems.
Part Number
Frequency Range,
MHz
Isolation dB Min.
Insertion Loss dB Typical.
Approx Weight
g
Power Rating W cw.
Connectors
80-030407 800 - 1000
1710 - 2170
>47dB
<0.3dB – GSM 900 Typical: 0.15dB
<0.3dB – GSM 1800 Typical: 0.25dB
<0.5dB – UMTS Typical: 0.4dB
800
200 (Low Pass)
100 (High Pass)
7/16DIN f
Impedance 50 Ohm, nominal VSWR (Typical) 1.23:1 Temperature Range -20 to +60°C Environment IP65, RoHS compliant Input ports 2 Output ports 1 MTBF typically >180,000 hours Housing Aluminium finished to RAL7035
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 51 of 58 © Axell Wireless Ltd www.axellwireless.com
2 OUTPUT 1
4 OUTPUT 3
4 IN
PU
T 3
2
INP
UT
1
Ø 5
DCB
DCB
A
E
NETWORK COMBINERS 4X4 Hybrid Matrix Combiner/Splitter, 800-2200MHz, N type or 7/16 DIN Connectors
Connects 4 input to 4 output for shared systems
High Isolation, low VSWR
High Average power rating
Low PIM
High reliability
N type or 7/16 DIN female connectors The Hybrid Matrix Combiner/Splitter is a matrix of four 3dB hybrid couplers. Signals applied to any of the four input ports will be split equally between the four output ports. Multiple signals in the same band can be combined to a common feeder cable, as may be required in a shared, in-building distributed antenna system. Unused ports must be terminated externally with a 50 Ohm load. The hybrid provides excellent isolation in the specified band and minimizes passive intermodulation (PIM). All units are sealed for outside applications and conform to IP65 specification.
Input Power per port, Watts
Part Number Frequency Range, MHz
Coupling dB
Isolation dB
Input VSWR
avg. Peak
Weight kg
Connectors
90-853101 800 - 2200 6.2±0.5 >25 <1.20:1 60 3K 1.7 N type 90-853111 800 - 2200 6.2±0.5 >25 <1.20:1 60 3K 3.1 7/16 DIN
Part No. A B C D E 90-853101 (shown) 25.4 85 137 147 183
90-853111 36 85 144 154 196
Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant PIM, Passive IM -140dBc, 2X43dBm
< -150dBc to special order Housing Passivated Aluminium
or powder paint Connectors N (f) or 7/16 DIN tri-plate
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 52 of 58 © Axell Wireless Ltd www.axellwireless.com
25
62.6
25
62.6
MULTI-BAND LOW LOSS POWER TAPS 800-2500MHz, N type Connectors, 30dB Minimum Isolation,
Multiple-Band Frequency Range, Cellular, PCS, UMTS
200Watt Average Power Rating
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65
N type female connectors Axell Wireless series of power taps is used to unevenly split high power cellular signals from 5dB to 40dB. The design is optimized to produce minimal reflections or loss and to minimize PIM and increase reliability over the whole 800-2500MHz band. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole The ultra wide frequency range allows use with multi-band antennas, leaky cable systems and wireless base stations.
Part Number Frequency Range, MHz Tap Loss, dB Input←→P2
Tap Loss, dB Input←→P1
VSWR Max. Weight g.
90-854005 800 - 2500 -5 ± 0.8 -1.65 ± 0.5 1.35:1 370 90-854006 800 - 2500 -6 ± 0.8 -1.26 ± 0.4 1.35:1 370 90-854007 800 - 2500 -7 ± 0.8 -1 ± 0.3 1.35:1 370 90-854010 800 - 2500 -10 ± 1.0 -0.46 ± 0.3 1.35:1 370 90-854015 800 - 2500 -15 ± 1.2 -0.2 ± 0.2 1.35:1 370 90-854020 800 - 2500 -20 ± 1.5 -0.1 ± 0.1 1.15:1 180 90-854025 800 - 2500 -25 ± 1.5 -0.1 ± 0.1 1.15:1 180 90-854030 800 - 2500 -30 ± 1.5 -0.1 ± 0.1 1.15:1 180 90-854040 800 - 2500 -40 ± 1.5 -0.1 ± 0.1 1.15:1 180
5dB to 15dB outline 20dB to 40dB outline
Frequency Range 800-2500 MHz Power Rating 200W, avg. 1.5kW peak PIM, Passive IM -150dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or
powder paint Connectors N (f), tri-plate DC transmission Between input and port P1 only
(P2 is coupled capacitively)
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 53 of 58 © Axell Wireless Ltd www.axellwireless.com
25
62.6
25
62.6
MULTI-BAND LOW LOSS POWER TAPS Unequal Power Splitters, 700-2700MHz, N type Connectors
Multiple-Band Frequency Range, Cellular, PCS, UMTS & WiFi
200Watt Average Power Rating
Minimal RF Insertion Loss
High Reliability
Low Passive Intermodulation (PIM)
Environment IP65
N type Female connectors Axell Wireless series of power taps is used to unevenly split high power cellular signals from 5dB to 40dB. The design is optimized to produce minimal reflections or loss and to minimize PIM and increase reliability over the whole 800-2500MHz band. All units conform to IP65 specification and their mechanical configuration allows them to be easily fixed onto a wall or a mast or pole. The ultra wide frequency range allows use with multi-band antennas, leaky cable systems and wireless base stations.
Part Number Tap Loss, dB Input←→P2
Tap Loss, dB Input←→P1
Typical
VSWR Max. Weight g.
90-854106 -6±0.8 @ 800 - 2500MHz -6±1.2 @ 700 - 2700MHz
-1.26 1.35:1 370
90-854110 -10±1.0 @ 800 - 2500MHz -10±1.2 @ 800 - 2500MHz
-0.5 1.35:1 370
90-854115 -15±1 -0.2 1.35:1 370 90-854120 -20±1.5 -0.1 1.15:1 180 90-854130 -30±1.5 -0.1 1.15:1 180 90-854140 -40±1.5 -0.1 1.15:1 180
6dB to 15dB outline 20dB to 40dB outline
Frequency Range 700-2700 MHz Power Rating 200W, avg. 1.5kW peak PIM, Passive IM -150dBc, 2x43dBm Impedance 50 Ohm, nominal Temperature Range -25ºC to +75ºC Environment IP65, RoHS compliant Housing Passivated Aluminium or powder paint Connectors N (f), tri-plate DC transmission Between input and port P1 only
(P2 is coupled capacitively)
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 54 of 58 © Axell Wireless Ltd www.axellwireless.com
LOW & MEDIUM POWER LOAD TERMINATIONS DC-3000MHz, 50 Ohms
Resistive Film Load
Finned Termination
Ideal for Wireless Communication
Powers 2W to 50W
Maximum VSWR 1.15:1
High Reliability Axell Wireless 90-855xxx series of 50 Ohm terminations are low and medium power coaxial loads, which operate from DC to 3GHz. Cooling fins minimize temperature rise of the resistive film terminating element, contained within a carefully matched housing. Standard connectors are N Type and 7/16 DIN, male or female. Part Number Connector Type Connector
Gender Power Rating
Weight (g) Length, (mm)
Cross Section (mm)
90-855021 N type Male 2W 52 40 20 90-855051 N type Male 5W 55 53 20 90-855101 N type Male 10W 130 54 35 90-855102 N type Female 10W 130 54 35 90-855103 7/16 DIN Male 10W 190 67 35 90-855104 7/16 DIN Female 10W 190 65 35 90-855201 N type Male 20W 160 82 35 90-855202 N type Female 20W 160 82 35 90-855203 7/16 DIN Male 20W 210 88 35 90-855204 7/16 DIN Female 20W 210 86 35 90-855301 N type Male 30W 270 137 40 90-855302 N type Female 30W 270 136 40 90-855303 7/16 DIN Male 30W 330 140 40 90-855304 7/16 DIN Female 30W 330 138 40 90-855501 N type Male 50W 390 137 50 90-855502 N type Female 50W 390 136 50 90-855503 7/16 DIN Male 50W 450 140 50 90-855504 7/16 DIN Female 50W 450 138 50
Impedance 50 Ohm, nominal Frequency Range DC - 3GHz Maximum VSWR 1.15:1 Peak power 2 kW Temperature Range -35ºC to +125ºC
Inner Layer Silver Plate Connectors
Outer Layer Tri-plate Housing Anodized Aluminium
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 55 of 58 © Axell Wireless Ltd www.axellwireless.com
100
100
110
100
167
185
100
HIGH POWER LOAD TERMINATIONS DC-3000MHz, 50 Ohms, 100Watt
Resistive Film Load
Finned Termination
Ideal for Wireless Apps
100Watt
Maximum VSWR 1.25:1
High Reliability Axell Wireless 90-856xxx series of 50 Ohm terminations are high power coaxial loads, which operate from DC to 3GHz. Cooling fins minimize temperature rise of the resistive film terminating element, contained within a carefully matched housing. Standard connectors are N Type and 7/16 DIN, male or female.
Part Number Frequency Range, GHz Connector Type Power Rating Weight (g) 90-856001 DC - 3GHz N type Male 100W 1780 90-856002 DC - 3GHz N type Female 100W 1780 90-856003 DC - 3GHz 7/16 DIN Male 100W 1860 90-856004 DC - 3GHz 7/16 DIN Female 100W 1860
90-856001 90-856003 90-856002 90-856004
Impedance 50 Ohm, nominal Peak power, 2 kW Maximum VSWR 1.25:1 Temperature Range -35ºC to +125ºC
Inner Layer Silver Plate Connectors
Outer Layer Tri-plate Housing Anodized Aluminium
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 56 of 58 © Axell Wireless Ltd www.axellwireless.com
30.00195.00
225.00246.50
25.0
010
0.00
125.
00
49.50
4 x M4 MOUNTING HOLES
HIGH POWER 150W LOAD TERMINATIONS DC-2500MHz, 50 Ohms, 150Watt
Resistive Film Load
Finned Termination
Ideal for Wireless Apps
150Watt
VSWR better than 1.2:1
High Reliability Axell Wireless 150W, 50 Ohm terminations are high power loads, which operate from DC to 2.5GHz. Cooling fins minimize temperature rise of the resistive film terminating element, contained within a carefully matched housing. Standard connectors are female N Type or 7/16 DIN
Part Number Frequency Range, GHz Connector Type Power Rating Weight (g) 09-002301 DC - 2.5GHz N type Female 150W 1750 09-002302 DC - 2.5GHz 7/16 DIN Female 150W 1750
Typical Outline, 09-002302 shown
Impedance 50 Ohm, nominal Maximum VSWR Better than 1.2:1 Temperature Range -20ºC to +60ºC MTBF >180,000 hours Housing Anodized Aluminium
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 57 of 58 © Axell Wireless Ltd www.axellwireless.com
5555
100
79
93
90
90100
125169.5
Ø 4.5
COAXIAL FIXED ATTENUATORS DC-2500MHz, 50 Ohms
Ideal for Wireless Applications
Power 10W to 50W
VSWR to 1.25:1 Max.
High Reliability
Indoor Application The Axell Wireless 90-857xxx series devices are medium power coaxial fixed attenuators, which operate from DC to 2.5GHz. Cooling fins minimize temperature rise of the resistive film network element, contained within a carefully matched housing Standard connectors are N, male to N, female.
10W Power Rating 25W Power Rating 50W Power Rating Part Number Attenuation
dB Part Number Attenuation
dB Part Number Attenuation
dB 90-857103 3 90-857203 3 90-857503 3 90-857105 5 90-857205 5 90-857505 5 90-857106 6 90-857206 6 90-857506 6 90-857110 10 90-857210 10 90-857510 10 90-857115 15 90-857215 15 90-857515 15 90-857120 20 90-857220 20 90-857520 20 90-857130 30 90-857230 30 90-857530 30
10W outline 25W outline 50W outline
Impedance 50 Ohm, nominal Frequency Range DC - 2.5GHz Peak power 1 kW Attenuation Accuracy ± 1 dB Maximum VSWR 1.25:1 Temperature Range -35ºC to +85ºC
Inner Layer Silver Plate Connectors
Outer Layer Tri-plate 10W 290 25W 520 Weight, g 50W 1200
Housing Anodized Aluminium
Passive Equipment Catalogue
Passive Equipment Portfolio Issue 9 (A4), March 2011 Page 58 of 58 © Axell Wireless Ltd www.axellwireless.com
ABOUT AXELL WIRELESS Axell Wireless is a leading worldwide developer and manufacturer of wireless coverage equipment and associated solutions. Today, the company is one of the top 3 global providers of wireless coverage solutions and the market leader in the provision of solutions for the public safety market. Applications for Axell Wireless equipment include wireless coverage solutions for road and railway tunnels, in-building and infrastructure, remote or rural environments, airports and transportation systems. With its headquarters in the United Kingdom, Axell Wireless has been operating for over 30 years and now has a substantial international presence operating out of 10 offices across 4 continents. A proven track record combined with a worldwide reputation for providing innovative and high quality products have made Axell Wireless a truly global player in the wireless coverage industry.
Winner of The Queen’s Award for Enterprise:
International Trade 2009
Top Related