8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
1/64
Model No. PV-D4743 / PV-D4743S
DVD/VCR DECKOperating Instructions
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
I ni t i
al S e t u p
( C onn e
c t i on
)
B
a si c
O p er a t i on
V C
R
O p er a
t i on
F or Y
o ur
I nf or m
a t i on
DV D
O p er a
t i on
Connections and Initial Setup Procedures are on pages 12 to 17.
Please read these instructions carefully before attempting to connect, operate or adjust thisproduct. Please save this manual.Spanish Quick Use Guide is included.(Gua para rpida consulta en espaol est incluida.)
As an E NERGY S TAR Partner, Matsushita Electric Corporation of America has determined that this product or product model meets the E NERGY S TAR guidelines for energy efficiency.
MULTI FORMAT PLAYBACK
*Ability to play back may depend on recording conditions.
LSQT0674B
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
2/64
INSTALLATION1 POWER SOURCE CAUTION
Operate only from a power source indicated on theunit or in this manual. If necessary, have yourElectric Utility Service Company or Video ProductsDealer verify the power source in your home.
2 POLARIZED OR GROUNDING PLUGAs a safety feature, this product comes with eithera polarized power cord plug (one blade is widerthan the other), or a three-wire grounding type plug.
POLARIZED PLUG CAUTION:This plug will only fit into an outlet one way. If you cannotfully insert the plug, try reversing it. If it still will not fit,have an electrician install the proper wall outlet. Do notdefeat the safety feature by tampering with the plug.GROUNDING PLUG CAUTION:This plug will only fit into a three-hole groundingoutlet. If necessary, have an electrician install theproper outlet. Do not defeat the safety feature bytampering with the plug.
3 POWER CORDMake sure power cords are routed so that theyare not likely to have anything rest on them, rollover them, or be in the way of walking traffic.If an extension cord is used, make sure it alsohas either a polarized or grounded plug and thatthe cords can be securely connected.Frayed cords, damaged plugs, and damaged orcracked wire insulation are hazardous and shouldbe replaced by a qualified service technician.Overloaded outlets and extension cords are firehazards and should be avoided.
4 DO NOT BLOCK VENTILATION HOLESVentilation openings in the cabinet release heatgenerated during operation. If they are blocked,
heat build-up inside the unit can cause failures thatmay result in a fire hazard or heat damage tocassettes or discs.For protection, follow these rules:a. Never cover ventilation slots or the unit while in
use, or operate the unit when placed on a bed,sofa, rug, or other soft surface.
b. Avoid built-in installation, such as a book caseor rack, unless proper ventilation is provided.
5 PLACEMENT: AVOID EXTREMELY HOT LOCATIONSOR SUDDEN TEMPERATURE CHANGESDo not place the unit over or near heater orradiator, in direct sunlight, inside closed vehicles,in high temperature [over 104 F (40 C)], or in over75% humidity. If the unit is suddenly moved froma cold place to a warm one, moisture maycondense in the unit and on the tape causingdamage. Never subject the unit to vibration,impact, or place it so that the surface is titled asinternal parts may be seriously damaged.
6 TO AVOID PERSONAL INJURY Do not place unsecured equipment on a sloping
surface. Do not place this unit on any support that is not
firm, level, and adequately strong.The unit could fall causing seriousinjury to a child or adult anddamage to the unit.
An appliance and cartcombination should be movedwith care. Quick stops,
excessive force, and unevensurfaces may cause the appliance and cartcombination to overturn.
Carefully follow all operating instructions anduse the manufacturer's recommendedaccessories when operating this unit orconnecting it to any other equipment.
FOR YOUR SAFETY, READ AND RETAIN ALL SAFETYAND OPERATING INSTRUCTIONS. HEED ALLWARNINGS IN THE MANUAL AND ON THE UNIT
USING THE UNITIf the unit has been in storage or moved to a new location,refer first to the INSTALLATION section of these safeguards.1 KEEP THE UNIT AWAY FROM WATER OR MOISTURE OF ANY KIND.2 IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR
STRONG IMPACT,unplug the unit and have it inspected by aqualified service technician before use.
3 DURING AN ELECTRICAL STORMDuring a lightning storm, whether indoors or outdoors, orbefore leaving the unit unused for extended periods of time,disconnect all equipment from the power source as well asthe antenna and cable system.
4 WHEN THE UNIT IS PLUGGED IN Never expose the unit to rain or water. DO NOT OPERATE
if liquid has been spilled into the unit. Immediately unplugthe unit, and have it inspected by a service technician.Fire and shock hazards can result from electrical shortscaused by liquid contact inside.
Never drop or push any object through openings in the unit.Some internal parts carry hazardous voltages and contactcan cause electric shock or fire hazard.Do not put any foreign object on the disc tray.
Avoid placing the unit directly above or below your TV setas this may cause electrical interference. Keep all magnetsaway from electronic equipment.
5 USING ACCESSORIESUse only accessories recommended by the manufacturer toavoid risk of fire, shock, or other hazards.
6 CLEANING THE UNITUnplug the unit. Then, use a clean, dry, chemically untreatedcloth to gently remove dust or debris. DO NOT USE cleaningfluids, aerosols, or forced air that could over-spray, or seepinto the unit and cause electrical shock. Any substance suchas wax, adhesive tape, etc. may mar the cabinet surface.Exposure to greasy, humid, or dusty areas may adverselyaffect internal parts.
SERVICE1 DO NOT SERVICE THIS PRODUCT YOURSELF
If, after carefully following the detailed operatinginstructions, this product does not operate properly, do notattempt to open or remove covers, or make anyadjustments not described in the manual. Unplug the unitand contact a qualified service technician.
2 IF REPLACEMENT PARTS ARE REQUIREDMake sure the service technician uses only parts specifiedby the manufacturer, or those having the same safety
characteristics as the original parts. The use of unauthorizedsubstitutes may result in fire, electric shock, or other hazards.3 HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY CHECK
After any service or repairs to the unit, request the servicetechnician to conduct a thorough safety check asdescribed in the manufacturer s service literature to ensurethat the unit is in safe operating condition.
Important Safeguards and Precautions
GROUNDCLAMP
ELECTRICSERVICE
EQUIPMENT
ANTENNALEAD INWIRE
ANTENNADISCHARGE UNIT(NEC SECTION 810-20)
GROUNDING CONDUCTORS(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250, PART H)
NEC - NATIONALELECTRICAL CODE
OUTDOOR ANTENNA INSTALLATION1 SAFE ANTENNA AND CABLE CONNECTION
If an outside antenna or cable system is connected to theequipment, be sure the antenna or cable system is groundedso as to provide some protection against built up staticcharges and voltage surges.Section 810 of the National ElectricalCode, ANSI/NFPA 70 (in Canada,part 1 of the Canadian ElectricalCode) provides informationwith respect to proper groundingof the mast and supportingstructure, grounding of the lead-in wireto an antenna discharge unit, size of grounding conductors,location of antenna discharge unit, connection to groundingelectrodes and requirements for the grounding electrode.
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES OR CIRCUITSAn outside antenna system should be located well away frompower lines, electric light or power circuits and where it will nevercome into contact with these power sources if it should happento fall. When installing an outside antenna, extreme care shouldbe taken to avoid touching power lines, circuits or other powersources as this could be fatal. Because of the hazards involved,antenna installation should be left to a professional.
2
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
3/64
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK)
RISK OF ELECTRIC SHOCKDO NOT OPEN
CAUTION
NO USER-SERVICEABLE PARTS INSIDEREFER SERVICING TO QUALIFIED SERVICE PERSONNEL
This symbol warns the user that uninsulated voltagewithin the unit may have sufficient magnitude to causeelectric shock.Therefore, it is dangerous to make any kind of contactwith any inside part of this unit.
This symbol alerts the user that important literature
concerning the operation and maintenance of this unithas been included. Therefore, it should be readcarefully in order to avoid any problems.
Safety Precautions/Mesures de scuritWARNING:To prevent fire or shock hazard, do not expose this
equipment to rain or moisture.CAUTION:To prevent electric shock, match wide blade of plug to
wide slot, fully insert.Avertissement: Afin de prvenir tout risque dincendie ou de chocs
lectriques, ne pas exposer cet appareil la pluie ou une humidit excessive.Attention: Pour viter les chocs lectriques, introduire la lame la
plus large de la fiche dans la borne correspondante de laprise et pousser jusquau fond.
Region Management Information:This DECK is designed and manufactured to respond to theRegion Management Information that is recorded on a DVD
disc. If the Region number described on the DVD disc doesnot correspond to the Region number of this DECK, thisDECK cannot play this disc.G The Region number for this DECK is 1.G The Player will play DVD-Video marked with labels
containing 1 or ALL.
1
CAUTION:UNIT IS A CLASS I LASER PRODUCT.HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULDCAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.WHEN THIS UNIT IS PLUGGED TO THE WALL OUTLET, DO NOT PLACEYOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHEROPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OFPROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT INHAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT ATTEMPT TO REPAIR YOURSELF.REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION:LASER RADIATIONWHEN OPEN DO NOTSTARE INTO BEAM.
ATTENTION:RAYONNEMENTLASER EN CASDOUVERTURE.NE PAS REGARDERDANS LE FAISCEAU.
(Inside of product)
FCC NOTE:This equipment has been tested and found to comply with part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference when operated in a residentialenvironment. If this equipment does cause interference to radio or television reception, which can bedetermined by turning the equipment off and on, use the equipment in another location and/or utilizean electrical outlet different from that used by the receiver.If necessary, consult the dealer or an experienced radio/TV technician for help. The user may find thebooklet, Something About Interference available from FCC local regional offices helpful.FCC Caution:To assure continued compliance, (example- use only shielded interface cables when connecting toother devices.) Any changes or modifications not expressly approved by the party responsible forcompliance could void the user s authority to operate this equipment.
3
ALL1
24
Example:
FCC Warning: Any unauthorized changes or modifications to this equipment would void the user sauthority to operate.
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
4/64
4 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Congratulationson your purchase of one of the mostsophisticated and reliable products on themarket today. Used properly, it will bring youyears of enjoyment. Please fill in the
information below. The serial number is on thetag located on the back of your DECK.
Before Using
Accessories
Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No. Serial No.
To order accessories, call toll free1-800-332-5368.
RF Coaxial CableLSJA0372
Batteries 2 AA
Remote Control
LSSQ0374 (PV-D4743)LSSQ0375 (PV-D4743S)
Loading the Batteries
Battery replacement caution Do not mix old and new batteries. Do not mix alkaline with manganese
batteries.
3) Close cover.
2) Insert batteries asmarked.
1) Open cover.
Disc formats supported by this DECKDECK can play back discs bearing any of the followingmarks:
Discs which cannot be played DVD with Region No. other than 1 or ALL DVD of PAL system, DVD-Audio, DVD-RAM, DVD-ROM,
DVD-RW, DVD+RW, CD-ROM, CDV, CD-G, CVD, SVCD,
SACD, Divx Video Disc and Photo-CD
[Discs Played 8cm (3") or 12cm (5")]
DVD (DVD-Video)
Video CD
CD (CD-DA)CD-R/CD-RW (CD-DA,Video CDformatted discs [finalized])WMA, MP3, JPEG
Logo Disc type
DVD-R (DVD-Video formatteddiscs [finalized])
Notes Do not use irregularly shaped discs (e.g. heart-
shaped), as these can damage the unit. It may not be possible to play CD-R, CD-RW and
DVD-R in all cases due to the type of disc orcondition of the recording.
If disc is brought from a cold to awarm environment, moisture mayform on the discWipe away moisture with a soft, dry, lint-free clothbefore using disc. (See above.)
Improper disc storageDiscs could be damaged if stored or left in areas: exposed to direct sunlight. that are humid or dusty. near heat (i.e. heater, radiator, etc.).
Disc Handling
To clean disc surfaceWith a soft, damp (water only) cloth,gently wipe from the center hole to theouter edge as shown below. (Wiping in acircular pattern will scratch the surface.)
Handling precautions Sticking a label on the disc may impair DVD-R
playback. Do not attach sticker to discs. (Do not use discs
with exposed adhesive from tape or left overpeeled-off stickers.)
Only hold disc by edges as shown below.Fingerprints, dirt and scratches can cause skippingand distortion.
Do not write on label side of disc. Never use record cleaning sprays, benzine, thinner,
static electricity prevention liquids, or any othersolvent.
Do not try to close disc tray when discis not properly placed.
Disc trayDisc
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
5/645
Table of Contents
Timer Recording .............................................................. 24, 25MTS Broadcast/ VHS Hi-Fi Stereo System .................... 26, 27Multi-Brand Control Feature ........................................... 28, 29Tape Operation (Search System) ....................................... 30 ~ 32Special VCR Features ..................................................... 33, 34Copying Your Tapes (Dubbing) ......................................................... 35
Disc Operation ............................................................... 36 ~ 40DVD Operation using On-Screen Displays ................. 41 ~ 42MP3/WMA/JPEG Playback Operation .......................... 43 ~ 45DVD Lock Feature ................................................................. 46Settings for DVD Operation .......................................... 47 ~ 49Language Code List .............................................................. 50
DVD / VCRWarning and Instruction Displays ........................................ 51Before Requesting Service ............................................. 52, 53Limited Warranty ............................................................. 54, 55
Customer Services Directory ............................................... 55Spanish (Espa ol) Quick Use Guide ............................ 56 ~ 61Index ................................................................................. 62, 63
DVD / VCRImportant Safeguards and Precautions ............................ 2, 3Before Using ............................................................................ 4
DECK & Cassette Information ........................................... 6 , 7Location of Controls ....................................................... 8 ~ 10Displays (On Screen Displays and Multi Function Display) .................... 11Connections .................................................................. 12 ~ 15Initial Setup for Basic Connections (Ready to Play) .......... 16, 17
VCRReset Language, Channels, Clock, VCR s Output Channel ... 18, 19Playback/ Record on a Tape ........................................... 20, 21DVD
Basic DVD Operation ...................................................... 22, 23
I ni t i al
S e t u p
( C o
nn e c t i on
)
B a si c
O p
er a t i on
V C R
O p er a t i on
F or Y
o ur
I nf or m
a t i on
DV
D
O p er a
t i on
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
6/646 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
DECK & Cassette Information
Video Head Clog SensorDuring playback, thisscreen appears ifclogging is detected.To remove screen,press PLAY on theremote or DECK.
Playing older or damaged tapes may eventuallycause video heads to become clogged.
V I DEO HEADS MAYN EED CLE AN I NGPLEASE I NSERT HEADCLE AN I NG CASSE TT EOR REFER T O MANUAL
END : P LAY
Use dry type head cleaning cassetteonly. (Part No. NV-TCL30PT is recommended.)
Follow cleaning tape instructions carefully.Excessive use of tape can shorten head life.
If head clog symptoms persist, contact yournearest servicenter by visiting our Web Site(see p. 55).
Head Cleaning
Only use tapes with the mark in this DECK.
Prevent Accidental Tape Erasure
Record/ Playback Time
Record Tab
Cover the holewith cellophane tape.
To record again
Break off the tab toprevent recording.
SP(Standard Play)
2 Hours40 Minutes1 Hour 2 Hours
5 Hours20 Minutes2 Hours 4 Hours
LP(Long Play)
3 Hours 6 Hours 8 HoursSLP(Super Long Play)
Type of Video CassetteTape SpeedSetting T160T120T60
Use a soft cloth or dusting attachment of a vacuum cleaner to remove dust from the ventilation holeson the back sides and bottom of the cabinet. Plastic surfaces are easily scratched and can bemarred by alcohol and various solvents. Avoid excessive use of oil-based furniture polishes sincethe materials used in the cabinet will accumulate more dust. We recommend using a non-abrasive,antistatic cleaner and polisher.
Cleaning DECK
Digital Auto PictureAutomatically controls the video output signal for less noise depending on the tape condition.Digital Auto TrackingContinuously analyzes the signal and adjusts for optimum picture quality.Manual Tracking Control(to reduce picture noise)Use during Playback and Slow Motion mode to reduce picture noise.Press CH (TRACKING) / on the remote control or on DECK until the picture clears up.To return to Auto Tracking, press POWER off, then on again a few seconds later.
V-Lock Control (to reduce picture jitter)In Still mode, CH (TRACKING) / operate as a V-Lock control.
Features for a Quality Picture (VCR)
R
R
R
RR
R
R
R
Screw driver
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
7/647
Power Source: 120 V AC, 60 HzPower Consumption: Power On: Approx. 32 watts, Power Off: Approx. 4 wattsVideo Signal: EIA Standard NTSC colorVideo Recording System: 4 rotary heads helical scanning system
Audio Track: 1 track (Normal), 2 channel (Hi-Fi Audio Sound)Tuner:Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69CABLE Channels: Midband A through I (14 ~ 22), Superband J through W (23 ~ 36)
Hyperband AA ~ EEE (37 ~ 64), Lowband A-5 ~ A-1 (95 ~ 99)Special CABLE channel 5A (01), Ultraband 65 ~ 94, 100 ~ 125
Input/Output Terminal: Audio/Video Line Input/Output, RF Input/OutputInput Terminal: Audio/Video Line Input (Front)Output Terminal: S-Video Output (DVD only), Component Video Output (DVD only)
Audio Output 2 (L), (R)Operating Temperature: 5 C ~ 40 C (41 F ~ 104 F)Operating Humidity: 10 % ~ 75 %Weight: 4.9 k g (10.8 lbs).Dimensions: 430 (W) x 95.5 (H) x 344 (D) mm
16-15/16 (W) x 3-12/16 (H) x 13-9/16 (D) inchDiscs Played(1) DVD-Video Disc 5 (12 cm) single-sided single-layer
5 (12 cm) single-sided double-layer5 (12 cm) double-sided double-layer (one layer per side)3 (8 cm) single-sided single-layer3 (8 cm) single-sided double-layer3 (8 cm) double-sided double-layer (one layer per side)
(2) Compact Disc 5 (12 cm) disc(CD-DA, Video CD) 3 (8 cm) disc(CD-R/CD-RW, MP3, WMA, JPEG)
Digital Audio Output: Digital Optical ConnectorPickup: Wavelength: 655 nm (DVD), 790 nm (Video CD/CD)
Laser power: CLASS II
Specifications
Note: Designs and specifications are subject to change without notice.
Definition of Terms (DVD)Angle: Some DVD discs feature scenes simultaneously shot from different angles.
The ANGLE button can be used to view the scene from different angles.(ANGLE Indicator lights on DECK when a scene recorded at differentangles is detected.)
Chapter Number: Titles are subdivided into numbered sections. You can quickly search fora favorite scene using these numbers.
DVD: A high-density optical disc on which high-quality pictures and sound havebeen digitally recorded. DVD incorporates new video compressiontechnology (MPEG II) and high-density recording technology which allowentire movies to be recorded with incredible playback quality.
Playback Control: With Video CD (version 2.0), scenes or information may be selected forviewing or listening from an interactive menu that appears on the TV screen.
Subtitles: Written dialogue which appears at the bottom of the screen.Time Number: The elapsed play time from the start of a disc or title. Use to quickly find
scenes. (May not work with some discs.)Title Number: For DVD discs with two or more titles, the title is numbered as title 1, title 2, etc.Track Number: Numbers assigned to tracks on Video CDs and CDs to allow specific tracks
to be quickly located.Video CD: CD containing picture and sound with same quality level as video tape.
This DECK also supports Video CDs with playback control (version 2.0).
I ni t i al
S e t u p
( C o
nn e c t i on
)
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093,licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by method claims ofcertain U.S. Patents and other intellectual property rights owned by Macrovision Corporation andother rights owners. Use of this copyright protection technology must be authorized by MacrovisionCorporation, and is intended for home and other limited viewing uses only unless otherwiseauthorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
8/648 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Location of Controls
Remote ControlBold : VCR FunctionItalic : DVD Function Bold Italic : VCR and DVD Functions Normal: Others
EJECT button: When this button is pressed in VCR mode, the tape is ejected.This button is inoperative if pressed during recording.If pressed in DVD mode, the disc tray opens or closes.
Virtual Surround Sound / ENTER
pp. 23, 28
POWER
PROGRAMp. 24
TV modep. 28
DISPLAY p. 11, 41
EJECT / OPEN / CLOSE pp. 20 , 22
FAST FORWARD / SEARCH / SLOW+ pp. 20 , 23 REWIND / SEARCH / SLOW - pp. 20 , 23
ADD/DELETE / CLEAR pp. 19, 39, 46
VCR/TVp. 21
SKIP SKIP
p. 23
SPEEDp. 21
DVD mode p. 28
COUNTER RESETp. 32
RETURN / SEARCHpp. 22, 30
ACTION pp. 18 , 47
CHANNEL / TRACKING / V-LOCK
pp. 6, 21
TAPE POSITION / VOLUME ADJUST
p. 34, 40
INPUTp. 35
MENU p. 38
VOLUME + / -p. 28
ANGLE p. 37
SUB TITLE p. 36
PLAY pp. 20 , 22
ZOOM p. 37
VCR modep. 28
STOP pp. 20 , 22
COMMERCIAL SKIP / ZEROpp. 31, 32
AUDIO (SAP / Hi-Fi)pp. 27 , 36
TITLE p. 38 PAUSE / STILLpp. 20 , 23
SELECT
NUMBER keys
SET
RECORDp. 21
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
9/649
I ni t i al
S e t u p
( C o
nn e c t i on
)
Front View of DECK
Audio/VideoInput Connector 2(LINE 2) p. 35
CHANNEL / TRACKING/V-LOCKpp. 6, 21
POWER
PAUSE p. 23
OPEN/CLOSE p. 22
STOP/EJECTp. 20
Multi FunctionDisplay
p. 11
RECp. 21
Disc Tray CassetteCompartment
PLAYp. 20
RemoteSensor
FAST FORWARD/SEARCHp. 20
REWIND/SEARCHp. 20
Front View of DECK
SKIP SKIP
p. 23
STOP p. 22
Bold : VCR FunctionItalic : DVD Function Bold Italic : VCR and DVD Functions
Normal: Others
PROGRESSIVE p. 10
PLAY p. 22
If the disc cannot be removed...First, unplug DECK. Then, prepare a rigidwire (e.g. an extended paper clip) and,applying moderate force, insert it straightinto the hole at the base of the tray.The tray will eject a little. Now, pull the trayall the way out and remove the disc.
Over 2 inches Over 2 inches
Use when moving DECK to new location, or if a mistake was made in the InitialSetup section (return to Factory Setting). Make sure a tape is not inserted in the DECK.
Reset All Memory Functions
Press and hold both VCR PLAYand CHANNEL on the DECK formore than 5 seconds. The power shuts off.
Turn DECK Power on.
3 Do Doing Initial Setup (Ready toPlay) on page 16.
2
1
21
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
10/6410 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Location of Controls (continued)
Rear View of DECK
AC Power Plug
S-Video Out Connector (DVD Only) pp. 10, 13
Component Video Output Connector (Y, P B , P R ) (DVD Only) p. 13
Audio Output 2 Connector (L/R) p. 13
Optical Digital Audio Output Connector (DVD Only) p. 15
Video InputConnectorp. 35
Video Output Connector p. 12
Audio Output 1Connector (L/R) p. 12
VHF/UHF Antenna Input Terminalp. 12
VHF/UHF Antenna Output Terminalp.12 While plugged into an AC outlet,
this DECK consumes 4 W ofelectrical power in off mode.
The following table shows the status of the output jacks when in VCR or DVD mode.
Bold : VCR Function Italic : DVD Function Bold Italic : VCR and DVD Functions
Note PROG functions on the remote are not available when using Component Video Outputand S-VIDEO OUT. Please set TV to either RF INPUT or VIDEO INPUT, and then pressPROG.
Video Output Audio Out 1Audio Out 2
Component Video Output
S-VIDEO OUT
VCRDVD
YESYES
N/A N/A
To enjoy PROGRESSIVE SCAN video(1). Connect Component Video Output to the component video input terminals of a television.
(See p. 13.)(2). When the PROGRESSIVE button is pressed, the ON lamp lights up (see p. 9) and the
PROGRESSIVE SCAN signal is output from the Component Video Output Connector .Note The PROGRESSIVE button can be operated when the DECK is in DVD function mode.
The screen may shift off-center when using progressive output. Please adjust the screenposition if this occurs. (Refer to your TV manual.) The DECK outputs video signals (not PROGRESSIVE SCAN) from the VIDEO OUT and S-
VIDEO OUT terminals when the ON lamp is lit.
YES
Audio Input Connector (L/R) p. 35
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
11/6411
V C R
TIMER
RECi - Fi
DVD
A
MANGLE
REC 1 2
: 0
0AM0 : 25 CH 02- 0 : 1 2 : 3 4
SPSTEREOSAPMONO
VCR Status & Clock Displays
Blank Tape/ No Video SignalIndicationsWhenever a blank section of a tapecomes up in Play mode, or when theselected channel has no broadcastsignal with Weak Signal DisplayFeature (p. 33) set to OFF, the TVscreen will turn solid blue.
Function Status
Rec Time Remaining(OTR mode only,see p. 21.)
Current Time Channel
Tape Speed(See p. 6.)
Broadcast AudioBeing Received(See p. 26.)
When a function buttonis pressed, e.g. PLAY,or you changechannels, a 5-seconddisplay appears.
Counter
Displays (On Screen & Multi Function)
To display or remove
overlay at right, press DISPLAY .
Hi-Fi IndicatorLights up when Hi-Fi audiois monitored in Play mode.
VCR mode IndicatorLights up whenDECK is VCR mode.
Clock/ Status/ Channel/ Speed DisplayDisplays the current time. Briefly displays DECKstatus when a function button is pressed. Brieflydisplays the channel number, or L1 or L2 whena channel or line input is selected. Briefly displaysthe recording speed when SPEED is pressed.
ANGLE IndicatorLights up when a scenerecorded at differentangles is detected.See p. 37. (DVD only).
DVD mode IndicatorLights up whenDECK is DVD mode.
Multi Function Display
On Screen Displays (VCR)
Timer IndicatorLights up when DECK is setfor Timer Recording, or whenOne Touch Recording (OTR)is used. Flashes when TimerRecording is set, but a tapehas not been inserted intoDECK and when a powerinterruption occurs duringTimer Programming.
AM/PMIndicator
Function & Channel Displays I ni t i al
S e t u p
( C o
nn e c t i on
)
CH 0 8
VCR REC Indicator
Lights up duringrecording.
Tape IndicatorLights up when a tapeis inserted.
DISC IndicatorLights up when a discis inserted.
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
12/6412 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Connections
1 Disconnect antenna or cable from TVand connect to DECK.
WARNINGWhen using Nut type RF coaxial cables, tighten withfingers only. Overtightening may damage terminals.
Basic Connections
Connect DECK and TV with an RF Coaxial Cable a (supplied) or an AV Cable b(not supplied) as shown in the figure below.
If your TV has AUDIO and VIDEO IN terminals, connect them to DECK for higherquality picture and sound.
You can enjoy stereo sound even if your TV is not stereo by connecting a stereo
amplifier to DECK.
IN FROM ANT.
OUT TO TVAUDIO
IN 1OUT
DVD/VCR DECK
VHF/UHF
R
L
VIDEO VHF/ UHF
VIDEOIN
AUDIO INR L
TV
AV CABLE (not supplied)
2 Connect DECK to TV with RF Coaxial Cable.RF COAXIAL CABLE a
b
DSS Receiver
OUT
ININ
Note to CABLE system installerThis reminder is provided to call the CABLE system installer s attention to Article 820-40 of theNEC in USA (and to the Canadian Electrical Code in Canada) that provides guidelines for propergrounding and, in particular, specifies that the cable ground shall be connected to the groundingsystem of the building, as close to the point of cable entry as practical.
OUT
IN
Antenna or Cable
Cable Box
or
IIIII DECK TVIIIII DSS Receiver DECK TV IIIII Cable Box DECK TV
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
13/6413
You CannotYou Can record and view
both scrambledand unscrambled
channels ifadditionalequipment isadded.This connectionrequires: twoconverter boxes,an A/B switch,and a 2-waysplitter.
view a channelother than theone selected
for any type ofrecording.
do a Timerrecording of achannel unlessyou select it onthe Cable Box.
IN FROM ANT.
OUT TO TV
IN 1
VHF/UHF
OUT
IN 2IN 1
Cable Box
OUTINOUT 2OUT 1
2-Way Splitter
OUT
A/B Switch
IN
IIIII Connect With Two Cable Boxes
IN FROM ANT.
OUT TO TV
IN 1
VHF/UHF
OUTCable Box
OUTIN
INRL
OUT
TV
VIDEO
AUDIO
ANT or CATV
You CannotYou Can record
scrambledchannels.
view any(includingscrambled)channel.
use RemoteControl to selectchannels withoutusing Multi-brandcontrol feature.
ANT
or
CATV
IN
VIDEO
AUDIORL
OUT
TV
Connect AUDIO OUT2 (L, R) to the AUDIO IN (L, R) of the TV. (audio input for COMPONENTor S-VIDEO mode).If your TV has COMPONENT VIDEO INPUT, connect to COMPONENT VIDEO OUT.If your TV does not have COMPONENT VIDEO INPUT but has S-VIDEO INPUT, connect toS-VIDEO OUT.When in DVD mode, set your TV to either COMPONENT VIDEO IN or S-VIDEO IN.
Other Connections
Notes
DVD/VCR DECK
DVD/VCR DECK
VHF/ UHF
Cable Box
VHF/ UHF
I ni t i al
S e t u p
( C o
nn e c t i on
)
IIIII With a Cable Box (DECK Cable Box TV)
21
3
Connections For DVD Only (enjoying higher picture quality)
You can watch DVDs through the S-VIDEO or COMPONENT VIDEO, VHF/UHF OUT TO TV,and VIDEO OUT connections to your TV. The VCR and TUNER pictures are available onlyfrom the VIDEO OUT and VHF/UHF OUT TO TV connections to your TV.
PROG functions on the remote are not available when using S-VIDEO OUT and COMPONENT
Video Output. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG. TV must have capability to accept and display a progressive scan signal to usePROGRESSIVE mode. Consult your TV operating instructions.
VIDEO
AUDIO
R
L
TV COMPONENTVIDEO OUT AUDIO OUT2
S-VIDEO OUT
DVD OUTPUT
Y
P B
P R R
L
IN
Y
PB
PR
S-VIDEOIN
R
L
IN
From DECK sA/V OUTPUT DVD/VCR DECK
or
IN
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
14/6414 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Connections (continued)
Notes on audio output from the optical digital audio output connectorEnjoying digital audio output from the digital audio output connector
*1 The type of audio output from the connector can be selected by the Settings for DVDOperation. (See p. 48.)
*2 Sound having 96 kHz sampling is converted into 48 kHz sampling when it is outputfrom the DECK s optical digital audio output connector.
For your reference: Dolby Digital is a digital sound compression technique developed by the Dolby LaboratoriesLicensing Corporation. Supporting 5.1-channel surround sound, as well as stereo (2-channel)
sound, this technique enables a large quantity of sound data to be efficiently recorded on a disc. Linear PCM is a signal recording format used in CDs. While CDs are recorded in 44.1 kHz/16 bit,
DVDs are recorded in 48 kHz/16 bit up to 96 kHz/24 bit. If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from
the same DVD movies that provide full 5.1 channel Dolby Digital soundtracks, as well as fromtitles with the Dolby Surround mark. For information on Panasonic or Technics Dolby Pro LogicSurround Sound Decoders please contact your local dealer.
Audio Connections
Ready ChecklistTurn down the volume, then turn DECK, as well as other equipment to be connected,
off before proceeding with connection.Do not block ventilation holes of any of the equipment and arrange them so that air cancirculate freely.Read through the instructions before connecting other equipment.Ensure that you observe the color coding when connecting audio and video cables.
Disc
DVD
Video CDCDMP3
WMA
Sound recording format
Dolby Digital
Linear PCM(48/96 kHz 16/20/24bit)DTSMPEG 1Linear PCM
MP3
WMA
Optical digital audio output from connectorDolby Digital bitstream (1-5.1 ch)or PCM (48 kHz sampling/16 bit only)* 1
Linear PCM (2ch)(48 kHz sampling/16 bit only)* 2
Bitstream or PCM (48 kHz sampling/16 bit only)* 1
PCM (44.1 kHz sampling)Linear PCM (44.1 kHz sampling)
Linear PCM (It depends on the MP3 file)
Linear PCM (It depends on the WMA file)
Manufactured under license from Dolby Laboratories.Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674,5,974,380, 5,978,762 and other world-wide patents issued and pending. DTS is a registeredtrademark of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. Allrights reserved.
Speaker Amplifier Speaker AUDIO OUT2 AUDIO IN
R LLR
DVD/VCR DECK I Connecting Amplifier (2ch stereo system) [Analog connection]
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
15/6415
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstreamor DTS bitstream is output from the DECK OPTICAL digital audio output connector.When DECK is connected to a Dolby Digital decoder or DTS decoder, you canenjoy theater-quality audio in your home. [An optical digital audio cable (optional)is required when an optional Dolby Digital decoder or DTS decoder is used.]
Notes on connecting an opticaldigital audio cable (optional)
Firmly connect the cable to theconnector.
Caution for optical digital audio output connector: When connecting an amplifier (with an Optical Digital Input Connector) which does not
contain the Dolby Digital or DTS decoder, be sure to select PCM at Dolby Digital and PCM at dts of the Settings for DVD Operation AUDIO OUTPUT (see p. 48).Otherwise, any attempt to play DVDs may cause such a high level of noise that it maybe harmful to your ears and damage your speakers.
When a Dolby Digital/DTS decoder is connected, please select Bitstream at dts or
Dolby Digital of the Settings for DVD Operation AUDIO OUTPUT .If PCM is selected, there will be stereo sound. (See p. 48). Video CDs and CDs can be played as usual.Note: Some DTS decoders which do not support DVD-DTS interface may not work properly with
DECK.
Amplifier
DVD/VCR DECK (Rear)
Front Speaker
Front Speaker
Surround Speaker
Surround Speaker
Center Speaker
Subwoofer
Decoder with Dolby Digital /DTS processing (optional)
Optical Digital Audio Cable(optional)
To OpticalDigital AudioInput Connector
I ni t i al
S e t u p
( C o
nn e c t i on
)
I Connecting Amplifier (5.1 ch Surround system) [Digital connection]DECK Dolby Digital Decoder Amplifier Speaker
orDECK DTS (digital theater systems) Decoder Amplifier Speaker
[5.1ch Surround system]
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
16/6416 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Before doing Initial Setup
Initial Setup for Basic Connections (Ready to Play)
Turn TV on .
See connections a RF Coaxial Cable Connection and b AV Cable Connection on p. 12. Set TV to channel 3.
Set TV to VIDEO.
[DECK TV] Go to Doing Initial Setup (Ready to Play). (See below.)[Cable Box DECK TV], [DSS DECK TV] Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel
in your time zone. If you use a DSS Receiver, it must be turned off.
21
3
Press VCR on remote for VCR mode.
Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channeland clock set starts. If screen below does not appear, check DECK - TV connection and, if TV is tuned to
channel 3, try switching it to channel 4. To change VCR s output channel, please refer to VCR s Output Channel on p. 19.
AUTO CLOCK SET
PROCEEDING
CANCEL : STOP
CH AUTO SET PROCEEDING
CANCEL : STOP
Plugging the AC Power Plug intoan AC outlet
Doing Initial Setup (Ready to Play)
2
1
Function buttons are inoperative during Initial Setup. To remove a cassette during Auto Set, press EJECT on
the remote or STOP/EJECT twice on the DECK.In this case, settings must be made manually. (See p. 18.)
Depending on conditions, Auto Clock Set may take longerthan 30 minutes. If so, press STOP to stop setup and
perform settings manually. (See p. 18.)
Notes
Continued on next page...
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
17/64
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
18/6418 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
SELECT : EXIT : ACTION
SET : SET
MENUSET UP VCRSET CLOCKSET UP CHANNELIDIOMA/LANGUE : ENGLISHVCRS OUTPUT CH:3
Clock
2) Press to selectMANUAL, and press SET .(For Auto Clock Set, selectAUTO CLOCK SET. )
3) Press and toselect, then set the date,time, and DST (DaylightSaving Time).
4) Press ACTION to startClock and exit thismode.
(TIME ZONE ADJUST appears only when autoclock is set.)
SEL. : QUITTER : ACTION
REGLER:SET
MENUREGLAGE MAGNETOSCOPEREGLAGE HORLOGEREGLAGE CANALLANGUAGE/IDIOMA:FRAN AISCA SORTIE : 3
ELEGIR : SALIR : ACTION
FIJAR : SET
MENUPREPARAR VCRFIJAR RELOJFIJAR CANALLANGUE/LANGUAGE:ESPA OLCANAL DE SALIDA : 3
SELECT : EXIT : ACTION
SET:SET
MENUSET UP VCRSET CLOCKSET UP CHANNELIDIOMA/LANGUE : ENGLISHVCR S OUTPUT CH:3
Language
2) Press SET repeatedly tochange language item asshown below.
For English
For Spanish
For French
1) Press to selectlanguage item.
Reset Language, Channels, Clock,
SELECT : EXIT : ACTION
SET : SET
MENUSET UP VCRSET CLOCKSET UP CHANNELIDIOMA/LANGUE : ENGLISHVCR S OUTPUT CH:3
Channels
2) Press to selectANTENNA, thenpress SET to set yourantenna system(TV or CABLE. )
3) Press to selectAUTO SET, thenpress SET .
If you use a Cable Box,set it to the PBS channelin your time zone.
After Channel Auto Setis finished, Auto ClockSet will be performed.
1
2
Press ACTION*to display MENU.
SELECT : EXIT : ACTION
SET:SET
MENUSET UP VCRSET CLOCKSET UP CHANNELIDIOMA/LANGUE : ENGLISHVCRS OUTPUT CH:3
3) Press ACTION to exit.
SELECT : EXIT : ACTION
SET:SET
MENUSET UP VCRSET CLOCKSET UP CHANNELIDIOMA/LANGUE : ENGLISHVCR S OUTPUT CH:3
AUTO CLOCK SETMA NU ALT I ME ZONE ADJUS T : 0
SELE CT : SET : SETEXIT : ACT I ON
SET CLOCK
DST : ON6 / 8 / 2003 SUN 12: 0 0 PM
SELECT H OUR---------- --- ----- -- ---
SET CLOCK
SELE CT : SET : SET BACK :EXIT : ACT I ON
1) Press to selectSET UP CHANNEL, and press SET .
1) Press to selectSET CLOCK, andpress SET .
PROGRAM functions are not availablewhen using COMPONENT Video Outputand S-VIDEO OUT. Please set TV toeither RF INPUT or VIDEO INPUT, andthen press PROGRAM.
CH AUTO SET PROCEEDING
CANCEL : STOP
SELE CT : SET : SETEXIT : ACT I ON
ANTENNA : CABLEAUTO SET
WEAK S I GNAL D I SPLAY : OFF
SET UP CHANNEL
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
19/6419
SET
SELECT
ADD/DLT
Add or Delete a ChannelTo add channel:Select channel with NUMBER keysand press ADD/DLT .
To delete channel:Select channel with CH / orNUMBER keys and press ADD/DLT .
CHANNEL 08 ADDED
CHANNEL 08 DELE TED
Time Zone Adjust
2) Press to selectTIME ZONE ADJUST,
VCR s OutputChannel
1) Press to selectVCR S OUTPUT CH., and press SET .
SELECT : EXIT : ACTION
SET : SET
MENUSET UP VCRSET CLOCK
SET UP CHANNELIDIOMA/LANGUE : ENGLISHVCR S OUTPUT CH:3
2) Press SET .
3) Press ACTION .
After 3 seconds
SELECT : EXIT : ACTION
SET : SET
MENUSET UP VCRSET CLOCK
SET UP CHANNELIDIOMA/LANGUE : ENGLISHVCR S OUTPUT CH:4
To Make Corrections,repeat steps 1) ~ 3).
DST (Daylight Saving Time)
DECK auto adjusts clock for DST.(p. 17.)Spring (First Sunday in April)DST:ON Sets clock ahead one hour.
Autumn (Last Sunday in October)DST:ON Turns clock back one hour.
If your area does not observeDaylight Saving Time, selectDST:OFF.
Keep these time changes in mindwhen programming DECK fortimer recordings.
1) Press to selectSET CLOCK, andpress SET .
and press SET tosubtract or add hour(s)as necessary.
*Important: If a remote control button does not workwhen pressed, press the VCR buttonon the remote and try the button again.
(Only when Auto Clock is set.)
3) Press ACTION twice.
TIME ZONE ADJUST returns to 0 if clock isset manually.
I F YOU PRESS ACT I ONKEY, VCR S OUTPUT CH SWITCHES TO CH 4.
PLEASE TUNE YOUR TV TOCH 4 .
SELECT : EXIT : ACTION
SET : SET
MENUSET UP VCRSET CLOCK
SET UP CHANNELIDIOMA/LANGUE : ENGLISHVCR S OUTPUT CH:3
B a si c
O p
er a t i on
VCR s Output Channel
CH /
POWER
VCR
NUMBERkeys
ACTION
SELE CT : SET : SETEXIT : ACT I ON
SET CLOCK
AUTO CLOCK SETMANUALT I ME ZONE ADJUS T : 0
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
20/6420 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Playback/ Record on a Tape
Insert a tape.2 1
Playback using DECK buttons
Press PLAY.
Multi Function Display
Press STOP/EJECT to stopand/ or eject a tape.
Ready ChecklistAll connections are made (pp. 12 ~ 15).TV and DECK are plugged in.TV is on and tuned to CH 3, 4, or VIDEO.Remote is in VCR mode. (Press VCR.)
Insert a tape.
If tape has no rec. tab (p. 6), auto play begins.
Special Features During Play
1
2
3Press REW/SLOW- or FF/SLOW+ in Stopmode to rewind or fast forward a tape.
Press EJECT on remote, or STOP/EJECTon DECK to eject a tape.
Press STOP to stop a tape.
Press PLAY* to play a tape.
Forward/Reverse Scene Search Press FF/SLOW+ or REW/SLOW- . Press PLAY to release.After search has begun, each additional press ofFF or REW changes speed as shown below.[SLP] : Approx. 21X Approx. 9X[LP] : Approx. 9X Approx. 7X[SP] : Approx. 7X Approx. 3XIf at 21X, 9X, or 7X speed the picture isinterrupted, change speed to 9X, 7X, or 3X.
Still (Freeze) Picture Press PAUSE/STILL . Press PLAY to release.Frame by Frame Picture Press PAUSE/STILL in Still mode. Press PLAY to release.Slow Motion Picture Press FF/SLOW+ (increase speed) or
REW/SLOW- (decrease speed) in Stillmode.
Press PLAY to release.
Playback a Tape
Picture interruption may occur with some TVs. FF and REW search speed may vary
depending on current tape position.
Notes These features work best in SP or SLP mode. The sound will be muted. To reduce picture noise, see Manual Tracking
Control on p. 6. After DECK is in Still or Slow mode for 3 minutes,
it will switch to Stop mode automatically toprotect the tape and the video head.
Notes
CH /
SPEED
REC
EJECT
STOPPLAY DVD
VCR/TV
PAUSE/ STILL
REW/ SLOW- FF/ SLOW+
DECK power comes on. If Auto VCR/TV (seep.32) is set to OFF, press VCR/TV on theremote to be VCR mode.
VCR
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
21/6421
Insert a tape with a record tab (p. 6).1
5
4
2
3
Press CH , or NUMBER keysto select the channel. For LINE input, see p. 35. If channel is over 100, press 100 key then press
the remaining 2 digits.
Press SPEEDto select the record speed (p. 6).SP = Standard Play LP = Long Play
SLP = Super Long Play
Press RECto start recording.(The VCR REC indicator lights up on Multi FunctionDisplay), To edit out unwanted scenes, press PAUSE/STILL
to pause, and again to resume recording. You cannot view another channel during recording.
Press STOPto stop recording.
It is not possible to record from DVD/ VideoCD/ CD to VHS tape using DECK. Watching one channel and recording another
is not possible when using Cable Box orDSS Receiver.
After 5 minutes in Pause mode, DECK stops toprotect a tape and video heads.
Speed appears on-screen and on Multi Function Display.
*Important: If a remote control button does not work when pressed,press the VCR button on the remote and try the button again.
Record on a Tape
Remove loose or peelinglabels from tapes to preventtape jam.
Multi Function Display
Record using DECK buttons
4
2 SelectChannel.
Press RECto startRecording.
Press STOP/EJECT to stop.
This video recorder, equipped with HQ(High Quality) system, is compatiblewith existing VHS equipment. Only usetapes with the mark. Only tapes
tested and inspected for use in 2, 4, 6,and 8 hour machines arerecommended.
Normal Rec 0:30 1:00
1:302:003:004:00
1 Insert a tape.
Note
Notes
B a si c
O p
er a t i on
One Touch Recording (recording in progress) , Press REC repeatedly to set the recording length (30 min. ~ 4 hours).
DECK shuts off after the preset record length.Record one station, watch another, press VCR/TV on the remote
(change to TV mode), select channels at TV (recording continues).
Select Channels at DECK (In STOP orREC. PAUSE mode), press VCR/TV on the remote
(change to TV mode), select channels at DECK.Play a disc while recording a tape. insert a disc during recording, press DVD , and then press PLAY .
DECK power comes on. If Auto VCR/TV (see p.32)is set to OFF, press VCR/TV on the remote to be
VCR mode.
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
22/6422 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Basic DVD Operation
Ready ChecklistAll connections are made. (pp. 12 ~ 15)DECK is plugged in.If DECK is connected to an audio amplifier,turn the stereo system s power on.
*1 Interactive DVD...
May include multiple camera angles,stories, etc.*2 Video CD with playback control...
Particular scenes or information can beinteractively selected from a menu thatappears on the screen.
Operation using DECK buttons
Press PLAY.
Insert a disc.
PressOPEN/CLOSE.
Press STOP.6
PressPOWER 4
1
3
3, 7
5 Press orNUMBER keys (seebelow) to select title,and press SET orPLAY to start playing.
1 Press POWER * on the remote or DECK.Press DVD to select DVD mode.
Press OPEN/CLOSE ,and then place a disc into the disc tray.
2
3
If a disc is already inserted, go to step 4.(Depending on the disc, playback maystart automatically.)
Press PLAY to start playing.
Disc tray closes automatically.4
12
If an interactive DVD* 1 ora Video CD with playback control* 2 is used and TITLEMENU appears, go to step 5.
You may also close tray bypressing OPEN/CLOSE .
Data reading time differs witheach disc.
Hold disc by its edgesonly (p. 4) with printedside up and use guides toplace into tray.Use 3 (8 cm)or 5 (12 cm) disc.2
1
CLOSE
READING
T I TLE MENU
Cas t l es
Love r s
Dogs
B i r ds
T I TLE MENU
Cas t l es
Love r s
Dogs
B i r ds
OPEN/ CLOSE
STOP PLAY DVD
PAUSE/ STILL
REW/ SLOW-
FF/ SLOW+
SET
SELECT
RETURN
POWER
NUMBER keys
TITLE
MENU
VSS
SKIP
10
SKIP
Pressing SET or PLAY is not necessary whenusing NUMBER keys.
Using NUMBER keys starts playing automatically.The number of available titles varies with each disc.
1 digit number 1 12 digit number 12 1 0 1 23 digit number 123 100 1 2 3
Press SKIP | or | to go to next or previousmenu screen. SKIP function not available with all discs.
Please refer to disc jacket for operation information.To return to menu (play stops)Press TITLE , MENU , or RETURN . (DVD)Press RETURN . (Video CD)
Press STOP to stop playing.67 Press OPEN/CLOSE to eject the disc.
Dogsof the world
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
23/6423
I Forward/Reverse Scene SearchPress FF/SLOW+ or REW/SLOW- during play.Press PLAY to release. Starting forward/reverse search during play
started from menu on Video CDs may recall menu. Search speed, slow at first, increases with each
additional press of the button up to 5 levels.
I Forward/Reverse Chapter/Track SkipPress SKIP | or | SKIP during play.Each press skips a chapter (DVD) ortrack (Video CD/CD). Pressing | SKIP once midway through a
chapter/track returns to the start of thatchapter/track. Each additional press skipsback one chapter/track.
Pressing SKIP | or | during play startedfrom menu on Video CDs may recall menu.
I Still Picture or PausePress PAUSE/STILL during play.Press PLAY to release.DVD/Video CD : DECK will enter still picture mode.CD : DECK will enter pause mode.
I Frame by Frame Picture(DVD/Video CD)Press PAUSE/STILL in still mode.Press PLAY to release.Each press advances picture one frame.Hold button down for consecutive frame advance.Whether pictures are advanced by FRAME orFIELD is selected automatically. (See p. 49)
I Slow Motion Picture (DVD/Video CD)Press FF/SLOW+ or REW/SLOW- in still mode.Press PLAY to release.Slow motion speed, slow at first, is increased
with each additional press of the button up to5 levels.
Reverse slow motion is not available for Video CDs.
When appears on the screen while a buttonis being operated, it means that thecorresponding operation is prohibited by DECKor the disc.
*Important: If a remote control button does not work when pressed,press the DVD button on the remote and try the button again.
Reverse Skip Forward Skip
Current playback position
Chapter/Track Chapter/Track Chapter/ Track Chapter/ Track
B a si c
O p
er a t i on
Power turns off after DECK has been inStop mode (DVD) for about 5 minutes.
Auto-Power Off Function Please read the disc jacket for operation
information. If a single sided disc is placed in upside
down, THIS TYPE OF DISC CANNOT BEPLAYED. PLEASE INSERT A DIFFERENTDISC is displayed.
Remove disc and press DECK POWER offwhen not in use.
Disc continues to rotate with menu displayedeven after play is done.Press STOP to clear menu display whenfinished with menu.
DECK memorizes the point where STOP ispressed ( STOP is displayed on screen).Press PLAY to resume play from this point.Pressing STOP again or opening the tray
cancels RESUME, however, RESUME is notcanceled when power is turned off and on. RESUME works only with discs for which
elapsed play time is displayed during play.
Resume Function
Notes
1. Do steps 1-4 (previous page).When menu appears, press STOP .
2. Press NUMBER keys to select desired
track (play begins). Check disc for track numbers. Press 1 to start at beginning of disc.
To Resume Menu use,Press STOP and press PLAY , then themenu will be displayed.Now, go to step 5 (previous page).
Enjoy Video CDs featuringplayback control without usingmenus (Video CDs only)
V.S.S. (Virtual Surround Sound)
Press VSS in DVD mode. The Surround sound effects can be
changed by pressing VSS repeatedly asshown by the figure below.
Surround sound effects is available in DVDmode only.
Turn off the surround effects on the otherequipment.
V.S.S. will not work, or will have less effect,with some discs.
Turn V.S.S. off if it causes distortion. Sound will only come from the two front
speakers if V.S.S. is on.
Enjoy a surround-like effect if you areusing two front speakers only. The effectis broadened and sound seems to comefrom virtual speakers on either side if the
disc has surround signals recorded on it.
Note
VSS OFFVSS OFF (default)
VSS1
VSS3
VSS2
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
24/6424 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
V C R
TIMERRECi - F i A
M
Timer Recording
Press PROG*to display Program.
Press PROGto end programming.
3
1
DAILY
13
131 12
SELECT / Selection Order
WEEKLY
(SAT)
WEEKLY(MON)
WEEKLY(SUN)
14
ExampleToday
2) To set remaining items,pressto select andpress SETto set START/ STOP times,
CH (channel) or LINEinput (p. 35), and tapespeed (SP, LP, SLP).
To Enter More Programs,pressto select andpress SETto set an unused programnumber, and then repeatstep 2.OrPress PROGto exit.
1) To set record DATE,press to select:1~31= one time, orDAILY= MON~ FRI, orWEEKLY= same timeeach week andpress SET .
See selection order left.
SE L E C T START D AT E
13 SU N --:-- --:-- --TODAY
DATE START ST OP CH
SLP
SELE CT : SET : SETEND : PROG
---- ------ ---- ---- ----- -
Ready ChecklistAll connections are made (pp. 12 ~ 15).TV and DECK are plugged in.Clock set correctly. (p. 18)Tape has rec.tab. (p. 6)Remote is in VCR mode. (Press VCR.)Sufficient tape remaining for recording time.
The Timer Indicator lights up on DECK. You can do Timer Recording with the power on or off.
TIMER REC WILL START SOON appears on-screen for 2 minutesbefore Timer Recording starts. If DECK is in DVD mode, no messageappears, but the VCR REC Indicator, the VCR mode indicator andREC will flash on Multi function Display.
VCR REC Indicator
VCR mode Indicator
Multi Function Display
TIMER Indicator
2
SET
SELECT
ADD/DLT
POWER
PROG
VCR
DT STA RT ST OP CH SPD13 10 : 00 P 12 : 00 P 02 SP-- -- : -- -- : -- -- ---- -- : -- -- : -- -- ---- -- : -- -- : -- -- --
CANCEL : ADD / DLT SELECT 1-8 :ENTER : SETEXIT : PROG
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
25/6425
To Replace program...
To Clear program...
Review, Replace or Clear Program Contents:(Recording is not in progress)
or
Important notes when using DSS Receiver When recording programs via DSS Receiver, DSS Receiver must be left on. When recording programs via an antenna or cable, DSS Receiver must be turned off.
CANCEL : ADD / DLT SELECT 1-8 :ENTER : SETEXIT : PROG
DT STA RT ST OP CH SPD-- -- : -- -- : -- -- --
8 10 : 00 P 12 : 00 P 02 SP10 8 : 00 P 9 : 00 P 10 SPS U 9 : 00 P 10 : 00 P L1 LP
Press ADD/DLT.
*Important: If a remote control button does not work when pressed,press the VCR button on the remote and try the button again.
12
3
Pressto select number andpress SETto display.
To cancel a Timer
Recording in progress...
Repeat Step 2 (p. 24)to set new programs.
Press PROGto end the programming.
Hold down STOP in VCR mode fora few seconds to cancel the TimerRecording.(The TIMER Indicator goes out
on Multi Function Display.) Any future daily or weekly recording
will be performed as programmed.
Notes If you are using a Cable Box, the VCR s channel for Timer Recording must be set to
the Cable Box input channel and Cable Box must be manually set to the desiredchannel. Cable Box power must be left on.
2 minutes before Timer Recording is performed, PLEASE PREPARE FOR TIMERREC appears and Timer Indicator flashes.Be sure a cassette with record tab is loaded and DECK is in Stop mode.
If a power interruption occurs while programming the timer, the timer program(s) may becanceled. If TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION appears on-screen, please re-enter the timer programs.
If the start time for Timer Recording comes up during recording and playing back,Timer Recording will not be performed.
Press PROG
to display Program List.
4
V C R
O p er a t i on
CANCEL : ADD / DLT SELECT 1-8 :ENTER : SETEXIT : PROG
DT STA RT ST OP CH SPD 7 9 : 00 A 12 : 00 A 08 SP
8 10 : 00 P 12 : 00 P 02 SP10 8 : 00 P 9 : 00 P 10 SPS U 9 : 00 P 10 : 00 P L1 LP
7 SUN9:00A 12: 00A 08TODAY----------------------------------------
DATE START S TOP CH
SP
SELE CT START DATE
SELE CT : SET : SET BACK :END : PROG
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
26/6426 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
MTS Broadcast/ VHS Hi-Fi Stereo System
Equipped with -TVNoise Reduction fortrue MTS reproduction.
-TV NoiseReduction is requiredfor good stereoseparation and audio
fidelity.
is aregistered trademark,and is licensed by
Technology Licensing.
ConnectionMake the Audio/Video Connection as shown on pp. 12 ~ 15. You can use TV connected to a Stereo amplifier and speakers instead of Stereo TV.
AUDIO(SAP/Hi-Fi)
DISPLAY
MONO broadcast
Normal monaural sound broadcast.
SAP broadcast
Secondary Audio Program (sublanguage) broadcast. Select SAPaudio mode for the sub language.
MTS Stereo broadcastMulti-channel Television SoundStereo broadcast. Select STEREOaudio mode. If stereo broadcast is weak and
display flickers, select MONO audiomode for possible better results.
MTS Stereo and SAP broadcast
Multi-channel Television SoundStereo (main language) andSecondary Audio Program (sublanguage) broadcasts are beingreceived simultaneously.Select STEREO or SAP audio mode.
The following are possible audio broadcast types and on-screen displays.The signal being received is indicated with an markwhile the selected audio mode is indicated with an arrow.
Receivable Broadcast Types
To display the broadcast signal being received, press DISPLAY* .
ST OP 12 : 0 0AM CH 020 : 00 : 00
SPSTER EOSAPMONO
ST OP 1 2 : 0 0AM CH 02 0 : 0 0 : 0 0 SPSTER EO
SAPMONO
ST OP 1 2 : 0 0AM CH 02 0 : 0 0 : 0 0
SPSTER EOSAPMONO
ST OP 12 : 0 0AM CH 020 : 00 : 00
SPSTER EO
SAPMONO
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
27/6427
Audio Mode for Recording
1
2
Make a recording.
See p. 21.3
Audio Mode for Playback
Start playback.See p. 20.
Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standardstereo tapes will playback in monaural sound.
To listen to Hi-Fi stereo playback , the DECK AUDIO (L/R) jacks must be connected toa stereo TV or an external stereo amplifier and speakers. (See pp. 12, 14.)
If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio. Hi-Fi and normal audio playback volume level may differ.
Arrow indicatesselection.
Refer to Receivable Broadcast Types on p. 26. Arrow indicates selection.
Select HIFI (L/R) or HIFI (L) or HIFI (R) to listen to stereorecordings in stereo sound.
Select NORMAL for monaural sound. Display disappears after 5 seconds.
Press AUDIO (SAP/Hi-Fi)to display audio mode.
(Display disappears after 5 seconds.)
Press AUDIO (SAP/Hi-Fi) repeatedlyto select desired mode.
Press AUDIO (SAP/Hi-Fi)to display audio mode.
Press AUDIO (SAP/Hi-Fi) repeatedlyto select desired mode.
STER EOSAPMONO
Notes
*Important: If a remote control button does not work when pressed,press the VCR button on the remote and try the button again.
V C R
O p er a t i on
123 H I F I : L / R
H I F I : L H I F I : RNORMAL
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
28/6428 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Multi-Brand Control Feature
ModeUnit DVD/VCR TV
DVD/VCR
TV
All
POWER, INPUT,NUMBER keys, ENTER,CH / , VOL + / -
EJECT / OPEN/CLOSE *,
DISPLAY , PLAY , STOP ,FF/SLOW+ , REW/SLOW- ,VCR/TV , PAUSE /STILL , SKIP ,AUDIO , CM/ZERO ,TAPE POSITION ,COUNTER RESET, SPEED,REC
After remote is set up, you can select VCR, DVD, or TV for thedesired function.
Press VCR, DVD , or TV on the remote.(Table below shows available remote buttons for each mode.)
Using Multi-Brand Control
Not all functions listed may be controllable. In TV mode, it may be necessary to press ENTER after pressing NUMBER keys
for channel selection.
Notes
VOL + / -
* Bold: VCR Function Bold Italic: VCR and DVD Functions Italic: DVD Function Normal: TV
DVD
POWER
NUMBER keys
ENTER
TV
VCR
The Remote Control can be set to control some TV functions.
Find your TV Brand Code Number on thefollowing page.
Set up for TV control, hold down TV button , enter code with NUMBER keys .
Multi-Brand Control Setup
Confirm code entry, press POWER to turn selected unit on or off. See table below for controllable functions in each mode.
3
1
Repeat setup after remote battery replacement. Remote will not control every TV made by the
manufacturer listed. If you get no response, your particularunit cannot be controlled. There are NO additional codesfor the products listed. If your product is not listed, then theremote is not compatible with that product.
Notes
2 If code number is 100 or greater, e.g., press 1 - 0 - 2 for 102.
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
29/6429
Some manufacturers use several codes for one brand. If the first code entered fails, try thenext one listed.
Some TV brands require you to turn on the power manually.
Panasonic ....................... 01, 02Quasar ............................ 01, 02RCA ....................................... 03GE ......................................... 03
Zenith .................................... 04Magnavox .............................. 05
TV Brand Code NumbersSylvania ................................ 05Sharp ............................... 06, 07Sony ...................................... 08Toshiba ................................. 09
Sanyo .................................... 10Fisher .................................... 10
JVC ........................................ 11Hitachi ................................... 12Mitsubishi ........................ 07, 13Samsung ............................... 14
Gold Star ................... 15, 16, 17
Important Notes
V C R
O p er a t i on
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
30/6430 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Index Search
Note If Index Search is started very close to an
index mark, that index mark may not becounted in the search.
1
2
Tape Operation
Search SystemFor each recording, an invisible index mark is placed on the tape. A program index andinformation are also included for timer recordings. These marks are used to access orscan recordings.
1
Program End Search
2
Fig. 1
Fig. 2
Fig. 3
Note
Locates end point of recording for continuity.
Examples of Program End Search .
If search exceedsa few seconds inBLANK area.
search continues 7 sec. past end point, tape rewinds to 10 sec. before end point, tape plays to end point and stops.
Upon locating end point,
If Program End Search is started very close toan index mark, that mark may be skipped over.
PROGRAM END SEARCH
SEARCH START : FF
EXIT :SEARCH
Program 2 or BLANKProgram 1
the current tape positionPress SEARCH button
FF
I N D E X
End Point
Program 2Program 1
the current tape positionPress SEARCH button
I N D E X
I N D E X
BLANK BLANK
FF End Point
Program 2Program 1
the current tape positionPress SEARCH button
BLANKI N D E X
FF
End Point
INDEX SEARCH
ENTER INDEX NUMBER :1USING 1- 9 KEYSFORWARD SEARCH :FFREVERSE SEARCH :REWNEXT :SEARCHEXIT :STOP
INDEX SEARCH
FORWARD SEARCH : FFREVERSE SEARCH : REW
Press SEARCH*to display SEARCHin Stop or Playmode, and thenpress NUMBERkeysto select recordingnumber. To calculate
number, see below.Press FF/SLOW+or REW/SLOW- onthe remote to startsearch.
Press SEARCH twiceto display SEARCH in Stop or Playmode.
Press FF/SLOW+on the remote tostart PROGRAMEND SEARCH. To cancel, press
PLAY or STOP .
Play begins atsearch end.To search forwardor back 1 index,
press FF/SLOW+ orREW/SLOW- on theremote whilescreen left isdisplayed (10 sec.). To cancel, press
PLAY or STOP .
To Calculate Index NumberExample 1:To go to rec. 2 from rec. 4, enter 3 and press REW.
Example 2:To go to rec. 6 from rec. 2, enter 4 and press FF.
NOTE: indicates start points of each recording.
61 5 72 3 4
1 753 4 62
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
31/6431
Auto PlayInsert a tape Power comes on,
Play starts if there is no record tab(see p. 6).
Auto RewindPlayFast Forward
Play Auto Eject(Repeat Play must be off)Play Tape end Rewind
Tape ejects if set some programs.
Auto Operation Functions
Commercial SkipVCR fast forwards (skips) over 1~3 minutesof recorded tape.
1 Press CM/ZERO in Play mode.
PLAY
1st Press
2nd Press
3rd Press
1 min Skip
2 min Skip
3 min Skip
*Important: If a remote control button does not work when pressed,press the VCR button on the remote and try the button again.
No indication appears on-screen.
The skip time can be changed bypressing CM/ZERO repeatedly asshown by the figure below.
REW/SLOW-FF/SLOW+
PLAY
SEARCH
CM/ZERO
STOPV
C R
O p er a t i on
Tape end Rewind
NUMBERkeys
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
32/6432 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Tape Operation (continued)
Repeat PlaySet to playback a recording over and over.
Zero SearchTo quickly return to a specified tape location.
Continue to record, playback etc .
Press STOP.
DECK will go into FF or REW mode and stopat the last point the Counter was set to 0:00:00.
543
21
3
21
SELECT : EXIT : ACTION
SET : SET
MENUSET UP VCRSET CLOCKSET UP CHANNELIDIOMA/LANGUE : ENGLISHVCR S OUTPUT CH:3
PLAY 12 : 0 0AM 0 : 00 : 00
SP
Press ACTION*to display MENU.
Pressto select SET UP VCR, andpress SET .
Play repeats at tape end or if unrecorded portionover 30 sec. is detected.
Press ACTION twiceto return to normal screen.
Press DISPLAY during playto display Counter.
Press COUNTER RESETat desired position to resetto 0:00:00 .
Press CM/ZERO in Stop modeto start Zero Search.
4
Pressto select REPEAT PLAY, and press SET
to set ONor OFF.
REPEAT PLAY : O FFREMOTE WARN I NG : ONAUTO SHUT-OFF : OFFAUTO VCR/TV : OFF
SELE CT : SET : SETEND : ACT I ON
SET UP V CR
Note For repeat play in DVD mode, see page 42.
REW 12 : 3 0AM CH 02 0 : 30 : 30
SP
STOP 12 : 3 1AM CH 02 0 : 00 : 00
SP
VCR/TV Selector FeatureThe VCR/TV selection can be set toauto or manual.
3
1
REPEAT PLAY : OFFREMOTE WARN I NG : ONAUTO SHUT-OFF : OFFAUT O VCR/TV : O FF
SELE CT : SET : SETEND : ACT I ON
SET UP V CR
Press ACTIONto display MENU.
Press
to selectAUTO VCR/ TV,andpress SETto set ONor OFF.
Press ACTIONto return to normal screen.4
Note
OFF(Manual): You select VCR orTV mode using theVCR/TV button on theremote.
ON(Auto): VCR mode isautomatically set whenVCR is turned on, or inPlay mode.
For more on VCR/TV selection, seeRecord one station, watch another and Select channels at DECK sections (see p. 21).
2 Pressto selectSET UPVCR, andpress SET .
SELECT : EXIT : ACTION
SET : SET
MENUSET UP VCRSET CLOCKSET UP CHANNELIDIOMA/LANGUE : ENGLISHVCR S OUTPUT CH:3
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
33/6433
Weak Signal Display FeatureWhen ON, picture is displayed regardless of signalstrength.
ON: Picture is displayed regardless of signalcondition, and may not always be clearly visible.
OFF: Screen turns solid blue when signal is weak ornon-existent.
Selecting ON has no effect on connected equipmentwith blue back feature.
Press ACTION twiceto return to normal screen.4
3
2 Pressto select SET UPCHANNEL, andpress SET.
Pressto select WEAK SIGNALDISPLAY, and
press SETto set ONor OFF.
SELECT : EXIT : ACTION
SET : SET
MENUSET UP VCRSET CLOCKSET UP CHANNELIDIOMA/LANGUE : ENGLISHVCR S OUTPUT CH:3
1Press ACTION
to display MENU.
SELE CT : SET : SETEXIT : ACT I ON
ANTENNA : CABLEAUTO S ETWEAK SI GNAL D I SPLAY:OFF
SET UP CHANNEL
Special VCR Features *Important: If a remote control button does not workwhen pressed, press the VCR buttonon the remote and try the button again.
When set to ON, all operationsexcept for timer record and tapeeject are prohibited. Useful forhouseholds with small children.
VCR Lock Feature
VCR LOCK ACT I VATED
VCR LOCK OFF
VCR Lock cancels in 24 hours ifclock is set.
To turn off, repeat above.
To turn on, hold down REC onDECK in Stop mode with notape inserted for 7 seconds.(Please ignore NO CASSETTE warning.)
REC
Auto Shut-Off FeatureThe power shuts off at a preset time.
3
1
4
Pressto select AUTO SHUT-OFF. Press SET repeatedly tochange shutoff time asshown below.
Press ACTION twiceto return to normal screen.
Press ACTIONto display MENU.
2SELECT : EXIT : ACTION
SET : SET
MENUSET UP VCRSET CLOCKSET UP CHANNELIDIOMA/LANGUE : ENGLISHVCR S OUTPUT CH:3
Pressto select SET UP VCR, andpress SET.
REPEAT PLAY : OFFREMOTE WARN I NG : ONAUTO SHUT-OFF : OFFAUTO VCR/TV : OFF
SELE CT : SET : SETEXIT : ACT I ON
SET UP V CR
OFF
2 Hours
6 Hours
4 Hours
The shut-off countdown will not function during Play orRecord.
Note
V C R
O p er a t i on
ACTION
SET
SELECT
COUNTERRESET
DISPLAY
CM/ZERO
STOP
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
34/6434 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Special VCR Features (continued)
If Multi-brand feature is used (p. 28), and this feature isset to on, a warning appears whenever an invalid keyis pressed in TV mode.
4
3
1
If OFF, remote warning will not appearwhen invalid key is pressed.
Press ACTION*to display MENU.
Pressto selectREMOTE WARNING, andpress SETto set ONor OFF.
Press ACTION twiceto return to normal screen.
Remote Warning Feature
2 Pressto select SET UP VCR, andpress SET .
SELECT : EXIT : ACTION
SET : SET
MENUSET UP VCRSET CLOCKSET UP CHANNELIDIOMA/LANGUE : ENGLISHVCR S OUTPUT CH:3
REPEAT PLAY : OFFREMOTE WARN I NG : O NAUTO SHUT-OFF : OFFAUTO VCR/TV : OFF
SELE CT : SET : SETEXIT : ACT I ON
SET UP V CR
*Important: If a remote control button does not workwhen pressed, press the VCR buttonon the remote and try the button again.
To find out the present tape position and amount of tape remaining.Tape position is displayed for VHS-C type Cassettes, tapesunder 30 minute long, and some other tapes, but theposition is not correct.
Tape remaining time display may not beprecise.
1
BE G IN END
SP
R 120 MI N.
DETECTING TAPE POSITION is displayedonly when a cassette is first inserted, and ittakes several seconds for correct tapeposition to appear.
Tape Position and Tape Status Feature
Press TAPE POS.to return to normal screen.
2
The present tape position indication andamount of tape remaining (according totape speed) is displayed.
DETECTING TAPE POSITION
Press TAPE POS.to detect current tape position.
This function cannot display exact amount of tape remaining fortapes 30 minutes or less, or for tapes over 120 minutes in length.
Note
REC
ACTION
SET
SELECT
STOP
INPUT
PAUSE/ STILL
Tape Position
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
35/6435
Copying Your Tapes (Dubbing)
1 Insert a pre-recorded tape.2
Insert a blank tape with record tab.
Press REC , then PAUSE/STILLimmediately to enter REC/PAUSEmode.3
Press INPUT to set DECK Input mode toLINE for Video Input.(See Selecting the Input Mode below.)
4 Press PLAY to start dubbing.Playing VCR starts playback. Press PAUSE/STILL to start dubbing.DECK starts recording.Press STOP to stop dubbing.
Caution: Unauthorized exchanging and/or copying of copyrighted recordings may becopyright infringement.
Please note that some tapes cannot be dubbed on DECK. Also, it is notpossible to dub DVD/ Video CD/ CD to VHS tapes using DECK.
Playing (Source) VCR Recording (Editing) DECK
5To Monitor Dubbing on TV1 Turn TV on and tune to the Recording
VCR channel (CH 3 or CH 4).2 If Auto VCR/TV (see p.32) is set to
OFF, press VCR/TV on the remote tobe VCR mode.
Note Dubbing tapes protected with CopyGuard will result in poor quality
recordings.
Connection
Press STOP to stop dubbing.
Press PLAY , then PAUSE/STILLimmediately to enter PLAY/PAUSEmode.
The operation of steps 4 and 5 must be done on theplaying and recording VCRs at the same time.
Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK.To monitor the dubbing, also connect TV as shown.
Connect L and R AUDIO OUT terminals on Playing VCR to L and RAUDIO IN terminals on DECK.In place of Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the unit s Audio/Video outputs to DECK.
Selecting the Input ModeMethod 1: Press INPUT repeatedly.Channel Number LINE1 LINE2
Method 2: Press CH / .Display will change as below.
Front of DECK VIDEO IN 2L-AUDIO IN2-R
(Audio/Video In Terminalson the front of DECK areavailable)
IN FROM ANT.
OUT TO TV
IN 1
VHF/UHF
OUT
TV
OUT
VHF/ UHF
DVD/VCR DECK
VIDEO AUDIO1
LR
VCR/ Camcorder (Hi-Fi)
VIDEO AUDIO L
R
L1or L2 lights up on Multi Function Display(about 4 seconds) when LINE1 or LINE2 is selected.
LINE1: For rear audio/video connection.LINE2: For front audio/video connection.
1
2
V C R
O p er a t i on
1 2 3
125LINE1(CABLE)
69(TV)
orLINE2Press Press
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
36/6436 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
AUDIO:3 ESPD o l b y D i g i t a l 3 / 2 . 1 c h
Hola
S ELE CT :END :AUDIO
AUDIO: 1 ENGD o l b y D i g i t a l 3 / 2 . 1 c h
Hello
S EL EC T :END :AUDIO
Te amo
If after several presses of the button the language does notchange, language selection is not offered on the disc.
When disc is removed, subtitles revert to initial settinglanguage. If the initial language is not recorded on the disc,the disc s priority language will appear.
You can select a different subtitle language (if offered) thanthe one set at the Settings for DVD Operation.(See p. 47.)
Pressto select a language.Pressto select ONor OFF.
Subtitle Language (DVD only)
Display disappears after5 seconds.
When no subtitles are offered,- will be displayed instead ofthe language number.
Press SUB TITLE *in Play mode to displaythe subtitle selectionon-screen. ENG
FRA
DEU
ITA
ESP
NLD
English
French
German
Italian
Spanish
Dutch
SVENOR
DAN
POR
RUS
JPN
SwedishNorwegian
Danish
Portuguese
Russian
Japanese
CHI
KOR
MALVIE
THA
Chinese
Korean
MalayVietnamese
Thai
Other
[Subtitle language][Audio sound track language]
Change the No. by pressing ,and press SET .
Ready ChecklistPlease read Basic DVD Operation on p. 22.
You can change the audio soundtrack language, selectedat the Settings for DVD Operation, to a different languageif available. (See p. 47.)(This operation works only with discs on which multipleaudio soundtrack languages are recorded.)
Press AUDIO in Play mode to display theaudio selection on-screen.
Audio Soundtrack Language (DVD only)
[Audio attribute 1 type, samplingfrequency, bit No. of the disc (seep. 48.) ]
Disc Operation
1
2
1
2
Subtitle language being played back (see chart, right).
Pressto select desired language.
Audio soundtrack language being played back (see chart,above right).
If, after several presses of theAUDIO button the language does notchange, language selection is notoffered on the disc.
When disc is removed, languagereverts to initial setting. If thislanguage is not recorded on the disc,the language recorded will be heard.
Notes
Notes
Display disappears after5 seconds.
Audio attribute 1 type, samplingfrequency, bit No. of the disc ornumber of speaker channel.
LPCM
Dolby DigitalDTS
96 kHzor
48 kHz
1ch - 5.1ch1ch - 5.1ch
16bit20bit24bit
Linear PCM disc
Dolby Digital discDTS disc
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
37/6437
SELECT :
When appears on the screen whilea button is being operated, it meansthat the corresponding operation isprohibited by DECK or the disc.
The ANGLE Indicator lights up onDECK when a scene recorded atdifferent angles is detected.
The angle number can be setbeforehand so that the angle isswitched whenever the ANGLEIndicator lights up.
ANGLE Indicator
DVD Karaoke (1 vocal) VOCAL ON VOCAL OFF DVD Karaoke (2 vocals) VOCAL V1 VOCAL V2 VOCAL V1+V2 VOCAL OFF Video CD LR L R
1 Press AUDIO in Play modeto display the audio screen.Vocal Selection for Karaoke Discs (DVD/Video CD)
DVDs may contain scenes shot from multiple cameraangles allowing the same scene to be viewed at differentangles. You can view these angles, if available, using theANGLE button.
1 Press ANGLE in Play mode to display theangle selection on-screen. Display disappears after
5 seconds.
Multiple Angle Viewing (DVD only)
2 Pressto select the desiredangle.
2Press (or )to select as shown below,andpress (or ) to set.(DVD only)
Number of angle being played back.
SELECT :
SELECT :END :AUDIO
You can enlarge specific portions of a picture andselect the zoom ratio using the ZOOM button duringDVD playback.
Press ZOOM repeatedly to change displayas follows.
Picture Zoom (DVD only)
You can enlarge the center portion of the imageto one of 2 magnifications. The subtitle cannot be enlarged nor
can it s position be changed. The picture zoom feature does not
work with a Video CD. During picture zoom, ZOOM1 or
ZOOM2 appears on-screen for 5second.
Zooming, on some discs, may resultin poor picture quality, or may notoperate at all.
I Use the , , and buttons to move the positionup, down, left and right.
Notes
Notes
*Important: if a remote control button does not work when pressed,press the DVD button on the remote and try the button again.
DV
D
O p er a
t i onAUDIO
ANGLE
SUB TITLE ZOOM
SELECT
SET
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
38/6438 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Some DVDs have more than one title, e.g. movies.If the disc offers a title menu, you can select the desiredtitle number. (Operation may vary according to the disc.)
1 Press TITLE *in Play modeto display the title screen.
Title Menu (DVD only)
DVDs may offer a special menu. This menu may includeguides to unique contents, audio/subtitle languages, etc.Although contents and operation may vary, the followingsteps show basic steps for using the menu.
1
2
Press MENU in Play mode to display
DVD MENU.
Press orNUMBER keys to select an item, andpress SET or PLAY
to perform.
DVD Menu (DVD only)
2Press orNUMBER keys to select a title, andpress SET or PLAY to start playing.
Disc Operation (continued)
Pressing SET or PLAY isnot necessary when usingNUMBER keys.
T I TLE MENU
Cas t l es
Love r s
Dogs
B i r ds
T I TLE MENU
Cas t l es
Love r s
Dogs
B i r ds
DVD MENU
3 . ANGLE
1 . SUBT I TLE2 . AUD I O
DVD MENU
3 . ANGLE
1 . SUBT I TLE2 . AUD I O
B i rdsof the world
Repeat step 2 if there ismore than one menu .
Pressing SET or PLAY isnot necessary when usingNUMBER keys.
STOP PLAY SET
SELECT
NUMBER keys
TITLE
MENU
CLEAR
ACTION
8/6/2019 Panasonic Vcr Dvd Pv d4743 Pv d4743s
39/6439
You can program specific tracks and order of play.
Program Play (Video CD/CD only) Ready ChecklistDECK is in DVD mode, press DVD.Video CD or CD is inserted.
1Press ACTION to display DVD MAIN MENU.
2 Pressto selectPLAY MODE, andpress SET to display.
3 Pressto selectPROGRAM PLAY, andpress SET to display.
5 Pressto select START, andpress SET to start playof programs in thesequence selected. To cancel, press STOP
during play, then pressCLEAR .
4 Pressto select a tracknumber (Tracknumbers on disc aredisplayed.), andpress SET .
Repeat step 4 to select another track. The selected track is added on the right side.
DVD MAIN MENU
SELECT :SET : SETEND : ACTION
DISC LANGUAGESAUDIO OUTPUTST I LL MODE : AUTOTV MODE : 4 : 3 Le t t e r b o xPA R E N TA L L O C K : LEVEL 8PLAY MODE
PLAY MODE
SELECT :SET : SETEND : ACTION
PROGRAM PLAYRANDOM PLAY
SELECT :SET : SETEND : ACTION
DISC PROGRAM1 6 11 16 5 82 7 12 17 15 63 8 13 18 1 134 9 14 19 3 25 10 15 20 2
CLEAR LASTCLEAR ALL START
PROGRAM PLAY
PROGRAM PLAY
SELECT :SET : SETEND : ACTION
DISC PROGRAM1 6 11 16 5 82 7 12 17 15 63 8 13 18 1 134 9 14 19 3
Top Related