Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 1 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Onderzoek Fysisch Norm
1.1) Weefsels/Breisels/NON-wovens
1.1.1) Sterktemeting
Treksterkte tot 5Kn (2 richtingen, striptest) ISO 13934-1 BS5081-1
Treksterkte tot 5Kn (2 richtingen, grabtest ) ISO 13934-2 BS5081-2
Treksterkte tot 250Kn (2 richtingen, striptest) ISO 13934-1 BS5081-1
Treksterkte tot 250Kn (2 richtingen, grabtest ) ISO 13934-2 BS5081-2
Treksterkte rubber (****) ISO 283
Treksterkte gecoat materiaal ISO 1421
Treksterkte non-woven ISO 9073-3
Treksterkte woven Wing rip techniek BS 4303
Peel or stripping test (hechtsterkte) ASTM D903-98
1.1.2) Scheursterkte (weefsels)
Scheurweerstand volgens Elmendorf ISO 13937-1
Scheurweerstand, enkele scheurmethode ISO 13937-2
Scheurweerstand, enkele scheurmethode ISO 13937-3
Scheurweerstand, dubbele scheurmethode ISO 13937-4
Scheurweerstand, gecoat materiaal ISO 4674-1
1.1.3) Naadvastheid (weefsels)
Naadsterkte/vastheid ( 2 richtingen, striptest ) ISO 13935-1
Naadsterkte/vastheid ( 2 richtingen, grabtest ) ISO 13935-2
Schuifweerstand op naden 3 of 6 mm naadopening fixedseamopening ISO 13936-1
Schuifweerstand op naden fixed load method ISO 13936-2
Schuifweerstand op naden 3 of 6 mm naadopening BS 3320
1.1.4) Barstdruk (breisels)
Doordrukkracht, barstdruk, berstdruk Hydraulisch ISO 13938-1
Doordrukkracht, barstdruk, berstdruk Pneumatisch ISO 13938-2
Doordrukkracht, barstdruk, berstdruk BS 4768
1.1.5) Constructie
Aantal draden (2 richtingen) ISO 7211-2
Aantal steken/staven (2 richtingen) TLM
Binding, eenvoudig ISO 3572
Breiaard, eenvoudig EN ISO 4921
Binding, gecompliceerd ISO 3572
Breiaard gecompliceerd EN ISO 4921
Aantal poolpluizen TLM
Garenlengte/ steek (incl. lin. Massa) TLM
Twist, garens ISO 7211-4
Twist, uit weefsel ISO 7211-4
Alfa (twist en garen nummer verplicht) TLM
Garennummer (spoel) ISO 2060
Garennummer (weefsel ketting) ISO 2060
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 2 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Garennummer (weefsel inslag) ISO 2060
Garennummer (breisels) NFG 07-101
1.1.6) Massa
Afmetingen TLM
Diktemeting textiel ISO 5084
Diktemeting textiel DIN 53885
Diktemeting papier ISO 534
Diktemeting kunststof ISO 4593
Gewicht per m2, textiel ISO 3801
Gewicht per m2, papier ISO 536
Gewicht per m2, kunststof/folie ISO 1183-1:2012 only par. 5.1.4.1
Gewicht per m2, geotextiel ISO 9864
Poolgewicht/m2 EN 12127
1.1.7) Pilling
ICI pilling tot 10000 omw. ISO 12945-1, BS 5811
ICI pilling tot 20000 omw. ISO 12945-1, BS 5811
ICI pilling tot 30000 omw. ISO 12945-1, BS 5811
ICI pilling tot 40000 omw. ISO 12945-1, BS 5811
Martindale pilling ISO 12945-2
Martindale pilling ASTM D4970
Brushing Pilling ASTM D3511
Random thumbler Pilling (30 minuten) ASTM D3512
Snagging
Snagging ICI snagging box tot 18000 omw. ISO 12945-1-SNAGGING
Snagging mace method ASTM D3939
Snagging (bean Bag Snag Tester) ASTM D5362
1.1.8) Slijtage
Slijtweerstand Martindale tot 10000 omw. ISO 12947-2
Slijtweerstand Martindale tot 20000 omw. ISO 12947-2
Slijtweerstand Martindale tot 50000 omw. ISO 12947-2
Slijtweerstand Martindale tot 100000 omw. ISO 12947-2
Slijtweerstand Martindale tot 6000 omw. + classificatie meubelstoffen + 4 controlles ISO 12947-2 + EN 14465
Slijtweerstand Martindale tot 20000 omw. + classificatie meubelstoffen + 11 controlles ISO 12947-2 + EN 14465
Slijtweerstand Martindale tot 45000 omw. + classificatie meubelstoffen + 16 controlles ISO 12947-2 + EN 14465
Slijtweerstand Martindale tot 100000 omw. + classificatie meubelstoffen + 21 controlles ISO 12947-2 + EN 14465
Slijtweerstand Martindale bepaling van massa verlies vanaf ISO 12947-3
Slijtweerstand Martindale beoordeling van verandering van uiterlijk na 12.000 toeren ISO 12947-4
Slijtweerstand Martindale Kunstleer (rubber or platic coated) EN ISO 5470-2 Methode 1 dry
Slijtweerstand Martindale Kunstleer (rubber or platic coated) EN ISO 5470-2 Methode 2 dry
Slijtweerstand Martindale Kunstleer (rubber or platic coated) EN ISO 5470-2 Methode 1 wet
Slijtweerstand Martindale Kunstleer (rubber or platic coated) EN ISO 5470-2 Methode 2 wet
Martindale Ball Plate slijtweerstand VDA 230-211
Martindale Ball Plate slijtweerstand EN ISO 17076-2
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 3 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Martindale Ball Plate slijtweerstand IUP 48-2 (IULTCS)
Martindale Ball Plate slijtweerstand BMW AA-0412
Martindale micro scratch methode A, Change is Gloss, 3M type 7447 zeer fijn (roodbruin), 6N, 80 rubs EN 16094 methode A
Martindale micro scratch methode B, Amount of scratches, 3M type 7440 medium fijn (bruin), 4N, 160 rubs EN 16094 methode B
Martindale Line contact plate slijtweerstand TLM
Slijtweerstand Rotary drum DIN 53516
Slijtweerstand Frank Hauser Din 53528
Taber Slijtweerstand incl. 1 beoordeling ASTM D3389
Taber Slijtweerstand incl. 1 beoordeling ASTM D3884
Taber CS10 Slijtweerstand kunststof, rubber incl. 1 beoordeling EN ISO 5470-1
Taber CS17 Slijtweerstand kunststof, rubber incl. 1 beoordeling EN ISO 5470-1
Taber H10 Slijtweerstand kunststof, rubber incl. 1 beoordeling EN ISO 5470-1
Taber H18 Slijtweerstand metaal, kunststof, rubber incl. 1 beoordeling EN ISO 5470-1
Taber Slijtweerstand leer incl. 1 beoordeling EN ISO 17076-1
Taber Slijtweerstand incl. 1 beoordeling GME 60345-1
Extra beoordelingen bij Taber test -
Wyzenbeek Slijtweerstand tot 15000 omw. ASTM D4157
Wyzenbeek Slijtweerstand per 5000 omw. Extra ASTM D4157
1.1.9) Kreukgedrag
Wash and wear rating (1 *wassen hangend drogen) ISO 7768 + ISO 6330
Wash and wear rating (1 *chemisch wassen) ISO 7768 + ISO 3175
Wash and wear rating (1 *wassen hangend drogen en strijken) ISO 7768 + strijken
Wash and wear rating (1 *wassen hangend drogen) AATCC 124
Wash and wear rating (5 *wassen en 5*droogtrommel) AATCC 124
Kreukhoek droog in 5-voud (Monsanto) EN 22313
Kreukhoek droog en nat in 5-voud EN 22313
Cylinder kreukproef ISO 9867
Cylinder kreukproef AATCC 128
1.1.10) Poolkenmerken
Poolverankering vloerbedekking ASTM D1335
Poolverankering vloerbedekking ISO 4919
Poolverankering vloerbedekking IWS 202
Poolverankering vloerbedekking BS 5229
Poolverankering Badhandoek EN 15598
Poolverlies BS 4655
Poolverlies BS 2543-ann. C
Poolverlies BS 2543-ann. D
1.1.11) Toucher
Drapeervermogen BS 5058
Kawabata (compression, Bending, Surface, Shearing, Tensile) Kawabata
1.1.12) Buiging
Buiging crumple flex 10 proefstroken ISO 8096-ann. F
Buiging crumple flex 4 proefstroken ISO 8096-ann. F
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 4 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Buiging schildknecht ISO 7854-A
Buiging schildknecht klein ISO 7854-B
Buiging schildknecht Groot ISO 7854-C
Buiging gelboflex EN 531-ann. 2
Buigstijfheid (nonwoven) DIN 53350
Buiging Textiel met kunstof laag flexometer EN 32100
Buiging voor kunstleer DIN 53359
Koudebestendigheid (***) EN ISO 1876-1
flexcibiliteit bij lage temperaturen van Bitumen EN 13859-1/2
flexcibiliteit bij lage temperaturen van Bitumen EN 1109:1999
1.1.13) Adhesie
Adhesie Coating DIN 53530
Adhesie Coating ISO2411
Adhesie gelaste voering DIN 54310
Adhesie rubber ISO 8033
Adhesie rubber BS 903-A12
1.1.14) Diverse
Doorprikweerstand EN 963
Hechtsterkte, weefsellaminaten/coatings ( 1 richting ) ASTM D2724-87
Elastisch herstelvermogen ISO 7389
Elastisch herstelvermogen IWS TM 179: 1972
Elastisch herstelvermogen IWS TM 179: 1997
Ritsluiting test alle aspecten incl. 200 bewegingen DIN 3416 DIN 3419
Ritsluiting test alle aspecten incl. 500 bewegingen BS 3084
Ritsluiting test continue per 200 bewegingen DIN 3416 DIN 3419
Ritsluiting duurtest extra omwentelingen per 200 bewegingen DIN 3416 DIN 3419
Ritsluiting Croswise zipper Strength DIN 3416 DIN 3419
Ritsluiting Pull-off strength of a zipper tooth DIN 3416 DIN 3419
Ritsluiting Top Stop holding strength DIN 3416 DIN 3419
Ritsluiting Bottom stop holding strength DIN 3416 DIN 3419
Ritsluiting Box holding strength DIN 3416 DIN 3419
Ritsluiting Slider lock strength DIN 3416 DIN 3419
Ritsluiting Tensile strength of the slider DIN 3416 DIN 3419
Rek test DIN EN 53835-13
Rek test DIN EN 53835-14
Button tear-off force / button opening force prijs vanaf EN 71.1
Button tear-off force / button opening force prijs vanaf EN 71.2
Button tear-off force / button opening force BS 7907 EN 14682
Peel Strength (klitteband) EN ISO 22776
Shear Strength (klitteband) EN ISO 22777
Scorch test (na chlorine behandeling) DIN 54283
Thermische schokbestendigheid van theeglazen TLM protocol 1001
1.1.15) NON Wovens
Gewicht ISO 9073-1
Dikte ISO 9073-2
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 5 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Treksterkte ISO 9073-3
Scheurweerstand ISO 9073-4
Gelbo flex test (comform EN 13795 OK textiel) ISO 9073-10
Doordrukkracht, berstdruk ISO 13938-1
Drapeerbaarheid BS 5335-1/2
Kolomproef, waterdichtheid EN 20811
Bundesmann DIN EN 29865
Spraytest ISO 4920 / EN 24920
Luchtdoorlatendendheid ISO 9237
Brandtest, vertikaal twee richtingen ISO 6941
Absorptie / Waterabsorberend vermogen TLM 15
Absorptie snelheid gemeten met water TLM 16
1.1.16) Puncture
Determination of puncture impact behaviour of rigid plastics ISO 6603-2
1.1.17) Medisch
Primary Wound Dressings - Part 1: Aspects of Absorbency EN 13726-1
Primary Wound Dressings - Part 3.2: Free Swell EN 13726-1
Primary Wound Dressings - Part 3.3: Fluid Handling capacity EN 13726-1
Primary Wound Dressings - Part 3.4: Fluid Affinity EN 13726-1
Primary Wound Dressings - Part 3.6: Dispersion Characteristics EN 13726-1
Primary Wound Dressings - Part 3.6: Dispersion/solubility of Hydrogels EN 13726-1 Primary Wound Dressings - Part 3.2: MVTR non direct liquid Moisture Vapour Transmission Rate of Permeable Film Dressings EN 13726-2
Primary Wound Dressings - Part 3.3: MVTR direct Liquid Transmission Rate of Permeable Film Dressings EN 13726-2
Test methods for primary wound dressings Part 3: Waterproofness EN 13726-3
Conformability (Extensibility & Permanent Set) EN 13726-4
1.2) Wasproeven
Krimp door wassen en drogen NEN EN ISO 6330 / 3759 / 5077
Huishoudelijk wassen, zonder meten e.d TLM
Krimp door stoom voor wol producten ISO 3005
Stoompers krimp (Hoffman press) Din 53894 T2
Krimp door water - Drenkproef ISO 7771
Krimp door water - Drenkproef NEN 1745
Krimp door chemisch reinigen after cleaning and finshing ISO 3175-1 / 3759
Krimp door chemisch reinigen tetrachloroethene ISO 3175-2 / 3759
Krimp door chemisch reinigen hydrocarbon solvents ISO 3175-3 / 3759
Krimp door chemisch reinigen simulated wetcleaning ISO 3175-4 / 3759
Krimp door strijken / persen 1 temperatuur ISO 5077
Krimp door strijken / persen 3 temperaturen ISO 5077
Plooivastheid na wassen ISO 7769
Stiknaden na wassen ISO 7770
Zelfstrijkendheid wash and wear ISO 7768
Spirality/Draaiing incl. wassen for Fabrics, Methode A ISO 16322-2
Spirality/Draaiing incl. wassen for garments, Methode A ISO 16322-3
Bodytwist (excl. wassen) BS 2819
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 6 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Droogtrommel drogen toeslag TLM
Stability to Wira (free Steam) BS 4323
Industrieel wassen per keer incl. trommel drogen (*) ISO EN DIN 10528
Industrieel wassen per keer incl. trommel drogen (*) ISO EN DIN 12138
Industrieel wassen aanloopkosten eenmalig per opdracht.
Industrieel wassen per keer incl tunnel drogen (***) ISO EN DIN 15797
Industrieel wassen per keer incl. trommel drogen (*) ISO EN DIN 15797
Industrieel wassen per keer incl. trommel drogen (*) ISO EN DIN 15797
Industrieel krimp bepalen na wassen ISO 5077
Bij industrieel wassen dient u minimaal 20kg begeleidings materiaal mee te sturen van de zelfde kwaliteit.
1.3) Kleurechtheden
Wasechtheid / Kleurechtheid, proef 1 ISO 105 C01
Wasechtheid / Kleurechtheid, proef 2 ISO 105 C02
Wasechtheid / Kleurechtheid, proef 3 ISO 105 C03
Wasechtheid / Kleurechtheid, proef 4 ISO 105 C04
Wasechtheid / Kleurechtheid, proef 5 ISO 105 C05
Wasechtheid / Kleurechtheid, proef 6 ISO 105 C06
Wasechtheid / Kleurechtheid, proef 8 vanaf ISO 105 C08
Oxidative Bleach Response ISO 105 C09
Wasechtheid / Kleurechtheid ISO 105 C10
Wasechtheid / Kleurechtheid industrieel ISO 105 C12
Chemisch reinigen / Dry cleaning (m) ISO 105 D01
Organische solventen ISO 105 D02
Water ISO 105 E01
Zeewater keuze ISO 105 E02
Chloorechtheid, één concentratie 20, 50 of 100mg (standaard is 50mg) ISO 105 E03
Zweet ( 2pH's ) (m) ISO 105 E04
Spatten zuur (m) ISO 105 E05
Spatten alkali ISO 105 E06
Spatten water ISO 105 E07
Spatten heet water ISO 105 E08
Bleken met Hypocloriet (m) ISO 105 N01
Bleken met Peroxide (m) ISO 105 N02
Bleken ISO 105 N03
Bleken ISO 105 N04
Droge verhitting per temp. ISO 105 P01
Stickoxide (NOX) echtheid ISO 105 G01
Verbrandingsgasechtheid ISO 105 G02
Verbrandingsgasechtheid AATCC 23
Ozonechtheid op maat 50 ppm 40graden celcius een controle punt prijs bij minimaal 10 stalen
Ozonechtheid op maat extra controle punt prijs bij minimaal 10 stalen
Determination of resistance to ozone cracking ISO 3011
Ozonechtheid ISO 105 G03
Ozon bestendigheid DIN 53509
Ozon bestendigheid ISO 1431
Colour fastness to carbonizing ISO 105 X01
Colour fastness to carbonizing ISO 105 X02
Colour fastness to chlorination ISO 105 X03
Colour fastness to mercerrizing ISO 105 X04
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 7 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Colour fastness to Organische oplosmiddelen, per middel ISO 105 X05
Colour fastness to soda boiling ISO 105 X06
Formaldehyde ISO 105 X09
Migratie naar PVC ISO 105 X10
Strijken en persen 1 temperatuur ISO 105 X11
Strijken en persen 3 temperatuur ISO 105 X11
Wrijfechtheid (droog en nat) ISO 105 X12
Wrijfechtheidvoor kleine oppervlaktes (droog en nat) ISO 105 X16
Colour fastness to Shampoo BS 1006 UK-TB
Opdruk levensduur eerste wasbeurt Durawash
Opdruk levensduur eerste wasbeurt Wascator
Opdruk levensduur extra wasbeurten extra wasbeurten
Non chlorine bleach AATCC TM172
Sublimatie DIN 54056
Phenolic Yellowing (vergeling textiel Courtaulds Method) ISO 105 X18
Speeksel echtheid DIN 53160-1
Zweet echtheid DIN 53160-2
Professioneel chenmisch reinigen ISO 3175-1
Professioneel chemische reinigen Perchlorethyleen (Tetrachlorethen) ISO 3175-2
Bovenstaande prijzen gelden per kleur
1.4) Microscopie
Microscopisch grondstof onderzoek TLM
Scheiding van draden EEG methode
Grondstof controle, microscopisch, eenvoudige garens TLM
Grondstof controle, microscopisch, gecompliceerde garens TLM
Schatting in preparaten TLM
Foto´s per stuk TLM
Elektronen microscooop 2000* tot 4000* per uur
1.5) Kleurmeting
Kleurvergelijking grijsschaal kleurverandering ISO 105 A02
Kleurvergelijking grijsschaal aan- en afbloeden ISO 105 A03
Kleurvergelijking/meting digitaal DE CIE lab ISO 11664-4
Kleurvergelijking/meting digitaal DE cmc CMC
Kleurvergelijking/meting digitaal RGB DIN 5033
Beoordeling van ISO 4892-2 samples Kleurmeter ISO 7724 ISO 4582
Beschermende kleding (excl. xenon belichting) 2 metingen *** EN 471 EN ISO 20471
Beschermende kleding (excl. xenon belichting) 1 meting *** GORT 3279
Beschermende kleding (retro reflectie meting) 1 meting *** EN 471 EN ISO 20471
Beschermende kleding (retro reflectie meting) 1 meting *** ANSI 107-2010
Beschermende kleding (retro reflectie meting) 1 meting *** CSA Z96-2009
Photoluminescent pigments and products – DIN 67510-1
Part 1: Measurement and marking at the producer, licht bron 1000lx
Ships and marine technology – ISO 15370
Low-location lighting on passenger ships – licht bron 25lx
Witheidgraad Weißgrad nach Ganz / Griesser ISO 11475
Witheidgraad Ganz / Griesser incl 10*wassen 105c06 mt. E1S ISO 11475
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 8 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
1.6) Vezels
1.6.1) Katoen
Fijnheid uit lengte en massa ISO 1144
Vezeldiameter, synthetisch ISO 137
Vezeldiameter, synthetisch ISO BS2043
Fijnheid denier bepaling basis ISO 137
GMO analyse (DNA op ruwe katoen, garen, doek) PGS-V1
1.6.2) Wol
Wolfijnheid ISO 137 / BS2043
Wol fiber diameter BS2043
Wol fiber diameter IWS TM 24
Vezellengte garen/spoel DIN 53808 wyra methode
1.6.3) Vlas
Airflow ISO 2370
1.7) Garens
1.7.1 Nummerbepaling
Garennummer (spoel) ISO 2060
Garennummer (weefsel ketting) ISO 2060
Garennummer (weefsel inslag) ISO 2060
1.7.2 Treksterkte
Treksterkte garen tot 5Kn van cone, excl. garennummer ISO 2062
Treksterkte garen tot 5Kn uit weefsel, inslag, excl. garennummer ISO 2062
Treksterkte garen tot 5Kn uit weefsel, ketting, excl. garennummer ISO 2062
Treksterkte garen tot 5Kn uit weefsel, ketting, excl. garennummer ASTM D885
Treksterkte garen tot 250Kn van cone, excl. garennummer ISO 2062
1.7.3 Torsie
Torsie EN 22061
Twist, enkelvoudig garen ISO 2061
Twijn, twee- of meervoudig garen basis ISO 2061
1.7.4 Regelmatigheid
Grading ASTM D2255
1.7.5 Gewichten
Handeslmassa ISO 6741
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 9 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
1.7.6 Diverse
Aantonen gekamde katoen TLM
Aantonen ringspin / open end garen TLM
Finess of Fibre:filamente (garennummer verplicht) TLM
1.8) Doorlaatbaarheid
1.8.1) Ten opzichte van licht
UV doorlaatbaarheid zon beschermings factor AUS. New zealand AS-NZS 4399
UV doorlaatbaarheid UPF factor EN 13758-1
UV doorlaatbaarheid Beschermings factor AATCC 183
UV doorlaatbaarheid Beschermings factor UV standaard 801
Transmittance 380-800 Nm in stappen van 5Nm EN 410
Transmittance 380-2500 Nm in stappen van 5Nm EN 410
Solar/Light/UV transmittance (rolgordijnen) incl classificatie EN 410, EN 13363-1 en EN 14501
Solar/Light/UV transmittance (rolgordijnen) zonder classificatie EN 410, EN 13363-1
Openess factor (zonwering) EN 410 in comb EN 13363-1
Total solar energy transmittance Gtot- classification EN DIN 14501 tabel 2
Seconday Heat transfer factor Gi,tot - classification EN DIN 14501 tabel 3
Normal/normal solar transmittance - Classifaction EN DIN 14501 tabel 4
Blackout meting / Verduisterend effect gordijnen tabel 6 klasse; Blackout of verduisterend.) EN DIN 14501 tabel 6
Verduisterend effect gordijnen tabel 7, klasse: 1(10lux), 2(1000lux), 3(75000lux) EN DIN 14501 tabel 7
Visueel Comfort Tabel 8, klasse: 0,1,2,3,4 EN DIN 14501 tabel 8 met EN 410 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics, Procedure B (Spektrophotometer) ASTM D1003-07 methode B
1.8.2) Ten opzichte van lucht
Luchtdoorlatendheid EN DIN ISO 9237
1.8.3) Ten opzichte van water
Kolomproef waterdichthied textiel EN 20811
Kolomproef na 5 x wassen EN 20811
Kolomproef na 5x chemisch reinigen EN 20811
Kolomproef hydrolic waterdichthied AATCC 127
Bundesmanntest DIN EN 29865
Spray-test ISO 4920
Spray-test AATCC 22
Water repellency Tumble Jar AATCC 70
Water repellency Rain Test AATCC 35
Wira shower BS 5066
Waterdichthied bitumen 24 uur Din EN 1928-B
1.8.4) Ten opzichte van waterdamp
Waterdampdoorlatendheid leer DIN EN ISO 14268
Waterdampdoorlatendheid coated fabrics BS 3424-34
Waterdampdoorlatendheid fabrics BS 7209 appendix B
Waterdampdoorlatendheid Kunststoffen/folie Methode A1, A2, B1, B2 JIS 1099
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 10 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
1.8.5) Ten opzichte van chemicaliën
Olie afstotendheid AATCC 118
1.8.6) Ten opzichte van temperatuur
TOG rating british standard (kinderen) BS 4745 and BS 5335
TOG rating british standard (volwassenen) BS 4745 and BS 5335
Thermisch weerstand RcT waarde EN 52616
1.8.7) Ten opzichte van elektricieteit
Elektrische oppervlakte weerstand DIN 54345-1
1.8.9) Ten op zichte van gas, Carbone dioxid, water, zuurstofsen etc. Testing of plastics - Determination of gas transmissionsrate - Part 1: Volumetrical method for testing of plastic films. DIN 53380-1 Testing of plastics - Determination of gas transmission rate - Part 2: Manometric method for testing of plastic films. DIN 53380-2 Testing of plastics - Determination of gas transmission rate - Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings. DIN 53380-3 Testing of plastics - Determination of gas transmission rate - Part 4: Carbon dioxide specific infrared absorption method for testing of plastic films and plastic mouldings. DIN 53380-4 Testing of carbon materials; determination of the coefficient of permeability by means of the vacuum-decay method with air as experimental gas; solid matters. DIN 51935 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability. DIN EN 1062-6 Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method. DIN EN ISO 2556 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique). DIN EN ISO 6179
Rubber, vulcanized – determination of permeability to gases – Constant volume method. ISO 1399
Rubber, vulcanized or thermoplastic – determination of permeability to gases ISO 2782
Rubber- or plastics-coated fabrics – measurement of gas permeability ISO 7229 Plastics – Film and sheeting – Determination of gas transmission rate – Instrument method – Part 1: Differential-pressure method ISO 15105-1 Plastics – Film and sheeting – Determination of gas transmission rate – Instrument method – Part 1: Equal-pressure method. ISO 15105-2
Standard test method for oxygen transmission rate through packages using a coulometric sensor ASTM F 1307 – 02 Standard test method for oxygen gas transmission rate through plastic film and sheeting using a coulometric sensor ASTM D 3985 – 02 Standard test method for oxygen gas transmission rate, permeability and permeance at controlled relative humidity through barrier materials using a coulometric detector ASTM F 1927 – 98
Testing of thermal insulation; determination of water vapour permeability of building and insulating materials DIN 52615 Testing of plastics and elastomer films, paper, board and other sheet materials - Determination of water vapour transmission - Part 1: Gravimetric method. DIN 53122-1 Testing of plastics and elastomer films, paper, board and other sheet materials - Determination of water vapour transmission - Part 2: electrolysis method. DIN 53122-2 Thermoplastic and elastomeric roofing and sealing sheets; Determination of water vapour transmission properties DIN EN 495-4 Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of water vapour transmission properties DIN EN 1931
Self adhesive tapes - Measurement of water vapour transmission in a warm humid atmosphere DIN EN 12023
Thermal insulating products for building applications - Determination of water vapour transmission properties DIN EN 12086 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability). DIN EN ISO 7783-2 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties EN ISO 12572 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method. ISO 15106-1
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 11 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method ISO 15106-2 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method ISO 15106-3
Standard test method for water vapor transmission of materials ASTM E 96 – 00 Standard test method for water vapor transmission rate of flexible barrier materials using an infrared detection technique ASTM F 372 – 99 Standard test method for water vapor transmission rate of sheet material using dynamic relative humidity measurement ASTM E 398 – 03 Standard test method for water vapor transmission rate through plastic film and sheeting using a modulated infrared sensor ASTM F 1249 – 01
Standard test method for water vapor transmission of organic coating films ASTM D 1653 – 03 Standard test method for evaluation of solubility, diffusivity, and permeability of flexible barrier materials to water vapor ASTM F 1770 – 97
Standard test method for water vapor transmission of flexible heat-sealed packages for dry products ASTM D 3079 – 94
Standard test method for moisture in plastics by coulometry ASTM D 4019 – 81
Standard test method for determining water vapor transmission rates through nonwoven and plastic barriers ASTM D 6701 – 01
Testing methods for water vapor transmission rates of plastic film and sheeting (instrument method). JIS K 7129 Testing methods for determination of the water vapour transmission rate of moisture-proof packaging materials (dish method) JIS Z 0208
Thermal Insulation Testings; Determination of Thermal Conductivity by the Tube Method. DIN 52613
POROMETER
Porometer pore size of fabrics BS 3321
Porometer pore size of fabrics (prijs bij 20 metingen) BS 3321
Porometer membrame filters bubble point method ASTM F 316
Porometer membrame filters automated liquid ASTM E1294
Porometer non woven membrame filters automated liquid ASTM D1117-80
Porometer bubble test pore size BS EN 24003
Porometer of evaluation by liquid expulsion BS 7591-4
Porometer Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test ASTM D 6767
Porometer Permeable sintered metal materials Determination of bubble test pore size DIN ISO 4003
Porometer Membrane filters Testing for bubble point DIN 58355-2 Porometer Hydraulic fluid power -- Filter elements -- Verification of fabrication integrity and determination of the first bubble point BS ISO 2942
1.8.9) Diverse
Vuil afstotendheid AATCC 130
Lambda waarde 10 metingen DIN 52612
Emisivity test EN 15976:2011
Emisivity test incl 500 uur UVB veroudering EN 15976:2011
Emisivity test (thermal emittance) ASTM C 1371
Static and Kinetic Coefficients of friction ASTM D 1894
1.9) Elektrostatisch**
Elektrische oppervlakte weerstand horizontaal BS DIN EN 1149-1
Elektrische oppervlakte weerstand verticaal BS DIN EN 1149-2
Elektrische oppervlakte weerstand charge Decay excl wassen BS DIN EN 1149-3
Elektrische oppervlakte weerstand charge Decay excl.wassen BS EN 61340-5-1
Wassen voor bovenstaande norm
Shirly methode 138 Shirly methode 138
Elektrische oppervlakte weerstand horizontaal BS 2050
Elektrische oppervlakte weerstand BS 6524
Elektrische oppervlakte weerstand FTMS 101c Methode 4046
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 12 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Elektrische oppervlakte weerstand BS EN ISO 11611 :clause 6.2 vertikaal
Elektrische oppervlakte weerstand vloerbedekking/afwerking BS 6654
Elektrische oppervlakte weerstand vloerbedekking/afwerking IBM & ICL
Elektrische oppervlakte weerstand vloerbedekking/afwerking(1) BS ISO 10965
Elektrische oppervlakte weerstand vloerbedekking/afwerking(1)(2) BS ISO 6356
Elektrische oppervlakte weerstand vloerbedekking/afwerking BS EN 1815
(1) indien antistatisch behandeld volgend BS En 14041 dan eerst reinigen.
(2) BAM ipv Neolite sole.
Elektrische oppervlakte weerstand DIN 54345-1
Elektrische oppervlakte weerstand DIN 54345-2
Elektrische oppervlakte weerstand DIN 54345-5
Elektrische oppervlakte weerstand DIN 54345-6
Rubber insullation test IEC 60111
Elektrische oppervlakte weerstand DIN 54345-6
Elektrische oppervlakte weerstand oppervlakte weerstand ASTM D 257
Elektrische oppervlakte weerstand volume weerstand ASTM D 257
1.10) Waterdamp
Waterdampweerstand huidmodel, skin model, RET EN 31092
Thermischeweerstand huidmodel, skin model, RCT ISO 11092
Waterdampweerstand RET-waarde EN 31092
Thermischeweerstand RCT-waarde ISO 11092
Waterdampweerstand RET-waarde + Thermische weerstand RCT-waarde EN 31092 / ISO 11092
Waterdampweerstand RET-waarde + Thermische weerstand RCT-waarde EN 31092 / DIN 52616
1.11) Thermal
Thermal Measurements building materials ISO 8302
Thermal Measurements building materials BS EN 12664
1.12) Schoenen**
Wear simulation by flex resistance prEN ISO 19955
Determination of washability in domestic washing machine EN ISO 19954
Determination of heel attachment EN 12785
Determination of thermal insulation EN 12784
Determination of sole adhesion EN ISO 17708
1.13) Veroudering UV Light***
UVTest Fluorescent Fluorescent UV Exposure of Plastics ASTM D4329
UVTest Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials ASTM G154
UVTest Coating materials and coating systems for exterior wood EN 927-6
Norm is ingetrokken en word vervangen door iso 16474 ISO 11507 Methode A
Norm is ingetrokken en word vervangen door iso 16474 ISO 11507 Methode B
UVTest Coatings, Paints and varnishes, 4h dry, 4h cond. ISO 16474-3 methode A
UVTest Coatings, Paints and varnishes, 5h dry, 1h water spray. ISO 16474-3 methode B
UVTest Accelerated Exposure of Automotive Exterior Material SAE J2020
UVTest Exposing Nonmetallic Materials ASTM G151
UVTest Exposing Nonmetallic Materials UVA340 Cycle 1, 4, 6 of 7 ASTM G154
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 13 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
UVTest Exposing Nonmetallic Materials UVB313 Cycle 2, 3, of 5 ASTM G154
UVTest Flexible sheets for waterproofing - Bitumen, plastic, and rubber sheets for roofing DIN EN 1297
UVTest Specifications for flexible intermediate bulk containers (FIBC) for non-dangerous goods DIN EN 1898
UVTest Geotextiles and geotextile-related products DIN EN 12224
UVTest Coil coated metals DIN EN 13523-10
UVTest Paints and varnishes - Determination of resistance to cyclic corrosion ISO 11997-2
UVTest Plastics Artificial Weathering Irr.=0,76 UVA 340, 8hours dry, 4hours cond. ISO 4892-3 methode A, Cycle 1
UVTest Plastics Artificial Weathering Irr.=0,76 UVA 340, 8hours dry, 0,25hour spray, 4hours cond. ISO 4892-3 methode A, Cycle 2
UVTest Plastics Artificial Weathering Irr.=0,83 UVA 340, 5hours dry, 1hours spray ISO 4892-3 methode A, Cycle 3
UVTest Plastics Artificial Weathering Irr.=0,83 UVA 340, 5hours dry, 1hours spray ISO 4892-3 methode A, Cycle 4
UVTest Plastics Artificial Weathering Irr.=0,76 UVA 351, 24hours dry ISO 4892-3 methode B, Cycle 5
UVTest Plastics Artificial Weathering Irr.=0,43 UVB 313, 8hours dry 4 hours cond. ISO 4892-3 methode C, Cycle 6 UVTest Weather Resistance Outdoor funiture, tents: UV Light and Moisture Exposure 8h 0.77w/m2 60°C, 4h
condensation 50°C AATCC 186 option 1 UVTest Weather Resistance Architectical: UV Light and Moisture Exposure 8h 0.77w/m2 60°C, 0,25h waterspray,
3,75h condensation 50°C AATCC 186 option 2 UVTest Weather Resistance Automitive : UV Light and Moisture Exposure 8h 0.77w/m2 70°C, 4h condensation
50°C AATCC 186 option 3
1.14) Verkleuring Xenon light***
Lichtechtheid, Windows IR, tot blauwwol 5 Exposure cycle A1 (Normaal) ISO 105 B02
Lichtechtheid, Windows IR, tot blauwwol 6 Exposure cycle A1 (Normaal) ISO 105 B02
Lichtechtheid, Windows IR, tot blauwwol 7 Exposure cycle A1 (Normaal) ISO 105 B02
Lichtechtheid, Windows IR, tot blauwwol 8 Exposure cycle A1 (Normaal) ISO 105 B02
Lichtechtheid, Windows IR, prijs per uur, excl. Beoordeling, Exposure cycle A1 (Normaal) ISO 105 B02 -A1
Lichtechtheid, Windows IR, prijs per uur, excl. Beoordeling, Exposure cycle A2 (Droog) ISO 105 B02 -A2
Lichtechtheid, Windows IR, prijs per uur, excl. Beoordeling, Exposure cycle A3 (Semi tropical) ISO 105 B02 -A3
Lichtechtheid, Windows IR, prijs per uur, excl. Beoordeling, Methode 1 ISO 105 B04 Methode 1
Lichtechtheid, Windows IR, prijs per uur, excl. Beoordeling, Methode 2, standaard. ISO 105 B04 Methode 2
Lichtechtheid, Windows IR, prijs per uur, excl. Beoordeling, Methode 3 ISO 105 B04 Methode 3
Lichtechtheid, Windows IR, prijs per uur, excl. beoordeling, Condition 3 ISO 105 B06 Condition 3
Lichtechtheid, gecombineerd met zweet oplossing ISO 105 B07
Lichtechtheid, Daylight Q, Irr.=0,51 Blackstandard 65°C, 102min dry, 18min water spray ISO 4892-2 methode A, cycle B1
Lichtechtheid, Window Q, Irr.=1,10 Blackstandard 65°C, continuously dry ISO 4892-2 methode B, cycle B2
Lichtechtheid, Window Q, Irr.=1,10 Blackstandard 100°C, continuously dry ISO 4892-2 methode B, cycle B3
Lichtechtheid, Daylight Q, Irr.=0,51 Blackpannel 63°C, 102min dry, 18min water spray ISO 4892-2 methode A, cycle B4
Lichtechtheid, Daylight Q, Irr.=0,51 Blackpannel 83°C, 102min dry, 18min water spray ISO 4892-2 methode A, cycle B5
Lichtechtheid, Daylight Q, Irr.=0,51 Blackpannel 89°C, 102min dry, 18min water spray ISO 4892-2 methode A, cycle B6
Lichtechtheid, Window Q, Irr.=1,10 Blackpannel 63°C, continuously dry ISO 4892-2 methode B, cycle B7
Lichtechtheid, Window Q, Irr.=1,10 Blackpannel 89°C, continuously dry ISO 4892-2 methode B, cycle B8
Beoordeling van ISO 4892-2 samples Grijs schaal methode ISO105-A02 ISO 4582
Beoordeling van ISO 4892-2 samples Kleurmeter ISO 7724 ISO 4582
Lichtechtheid, Daylight Q, Blackpannel Insulated 65°C, Continuous RUN, 102min dry, 18min water spray ISO 11341 methode 1, cycle A
Lichtechtheid, Daylight Q, Blackpannel Insulated 65°C, Discontinuous RUN, 102min dry, 18min water spray ISO 11341 methode 1, cycle B
Lichtechtheid, Daylight Q, Blackpannel Insulated 65°C, Continuous RUN, Continuously dry ISO 11341 methode 1, cycle C
Lichtechtheid, Daylight Q, Blackpannel Insulated 65°C, Discontinuous RUN, Continuously dry ISO 11341 methode 1, cycle D
Lichtechtheid, Window Q, Blackpannel Insulated 65°C, Continuous RUN, 102min dry, 18min water spray ISO 11341 methode 2, cycle A
Lichtechtheid, Window Q, Blackpannel Insulated 65°C, Discontinuous RUN, 102min dry, 18min water spray ISO 11341 methode 2, cycle B
Lichtechtheid, Window Q, Blackpannel Insulated 65°C, Continuous RUN, Continuously dry ISO 11341 methode 2, cycle C
Lichtechtheid, Window Q, Blackpannel Insulated 65°C, Discontinuous RUN, Continuously dry ISO 11341 methode 2, cycle D Lichtechtheid, Daylight Q, Blackpannel Insulated 77°C±3, Continuous RUN, 90min dry, 30min light and water
spray, 70%RH±5 AATCC 169 option 1
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 14 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Lichtechtheid, Daylight Q, Blackpannel Insulated 77°C±3, Continuous RUN, 60min dry, 60min no light and no
water spray, 70%RH±5 AATCC 169 option 2
Lichtechtheid, Daylight Q, Blackpannel Insulated 77°C±3, Continuous RUN, 120min dry, 27%RH±5 AATCC 169 option 3 Lichtechtheid, Daylight Q, Blackpannel Insulated 63°C±3, Continuous RUN, 102min dry, 18min light and water spray, 50%RH±5 AATCC 169 option 4
Lichtechtheid, Daylight Q, Blackpannel Uninsulated 63°C, 102min dry, 18min water spray ASTM G155 cycle 1
Lichtechtheid, Extended UV- Q/B, Blackpannel Uninsulated 89°C, Light 228min, donker 60min SAE J2412
Lichtechtheid, coated textile speciale omstandigheden prijs per uur vanaf EN 12280-2
Lichtechtheid, Paints and varnishes Daylight Q, Irr.=0,51 Blackstandard 65°C, 102min dry, 18min water spray ISO 16474-2 Methode A cycle 1
Lichtechtheid, Paints and varnishes Daylight Q, Irr.=1,10 Blackstandard 65°C, continius dry ISO 16474-2 Methode B cycle 2
Lichtechtheid, Paints and varnishes Daylight Q, Irr.=1,10 Blackstandard 100°C, continius dry ISO 16474-2 Methode B cycle 3
1.15) Slipweerstand
Slipweerstand van vloersystemen classificatie R9,R10,R11,R12,R13 DIN 51130
Classificatie V4, V6, V8, of V10 DIN 51130
BGR 181 vloersystemen slipweerstand classificatie R9,R10,R11,R12,R13 en V4, V6, V8, of V10 DIN 51130
Slipweerstand van vloersystemen classificatie A, B en C Din 51097
Slipweerstand van vloersystemen dmv GMG 100 DIN 51131
Slipweerstand platen van natuursteen voor buitenbestrating DIN EN 1341 bijlage E
Oppervlak-eigenschappen van weg- en vliegveldverhardingen EN 13036-4
Polyvinylchloride vloerbedekkingen met verhoogde slipweerstand EN 13845
Pendulum test BS 7976-2
Pendulum test BS 13036-4
1.16) Geluid metingen
Materials for acoustical applications. Determination of airflow resistance DIN EN 29053 / ISO 9053
Determination of sound absorption coefficient and impedance in impedance tubes EN 10534-2
Measurement of sound absorption in a reverberation room ISO 354 / ISO 11654
Determination of the sound absorption coefficient in situ in the sence of DIN CEN/TS 1793-5 DIN ISO 13472-1Derermination of the airborne sound insulation of building elements in the aiborne sound transmissions suite with suppresse flanking transmission DIN EN ISO 140-3 717-1
Determination of the inpact sound reduction of floorings in the seiling test rig acc. DIN EN ISO 140-8 717-2
Determination of the airflow resistivity or the specific airflow resistance acc. ISO 29053 / ISO 9053
Derermination of the dynamic stiffness acc. To DIN EN 29052-1 / ISO 9052-1
Determination of the gross density of open porous materials acc. To DIN 51913 Determination of the porosity and the accessible void content, respectively in the sense of ASTM incl determination of the gross density of open porous materials aac to DIN ASTM D2856 / DIN 51913
Determination of the elastic modulus acc. to DIN EN ISO 6721-3 6721-4 6721-5
Determination of the shear modulus acc. To DIN EN ISO 6721-6
Determination of the torsional modulus acc. To DIN EN ISO 6721-2
Determination of the loss factor as a function of temperature acc. To DIN EN ISO 6721 DIN 53440 JIS G 0602Determination of the structure-borne reverberation time in the sense of DIN, Determination of the loss factor acc. To EN DIN 45635-8 DIN EN 12354-1
1.17) Corrosion Test(***)
Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) ASTM B117 Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrustions and Panels ASTM D1654
Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus ASTM D1735
Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity ASTM D2247
Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal ASTM D2803
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 15 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Standard Guide for Testing Coating Powders and Powder Coatings ASTM D3451
Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation ASTM D4585 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) ASTM D5894 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel ASTM D6675
Standard Practice for Modified Salt Spray (Fog) Testing ASTM G85
Salt Spray Resistance Test for Painted Panels and Parts Ford FLTM BI 103-01
Water Immersion Test for Painted Parts and Panels Ford FLTM BI 104-01
Condensing Water Vapor Test Ford FLTM BI 104-02
Salt Spray Test GM 4298P
Water Fog Humidity Test GM 4465P
Paints and Varnishes- Determination of resistance to neutral salt spray (fog) ISO 7253
Corrosion Tests in Artificial Atmospheres - Salt Spray Tests ISO 9227
Corrosion Preventive Compound, Underbody Vehicle Corrosion Protection SAE J1959
Corrosion resistance Footwear metallic Accessoiries EN ISO 22775
1.16) Diverse
Waterabsorberend vermogen DIN 53923
Materials for acoustical applications. Determination of airflow resistance EN 29053 ISO 9053
Determination of sound absorption coefficient and impedance in impedance tubes EN 10534-2
Measurement of sound absorption in a reverberation room ISO 354 / ISO 11654
Determination of the static and dynamic coefficient of friction eerste staal EN 14882
Determination of the static and dynamic coefficient of friction ieder volgende EN 14882
Test procedure for comparative examination of cleanable filter media VDI 3926
Veiligheidseisen en beproevingsmethode voor kinderslaapzakken tot einde van 2015 BS 8510
Veiligheidseisen en beproevingsmethode voor kinderslaapzakken EN 16781:2014
Veiligheidseisen en beproevingsmethode voor kinderdekbedden (geen dekbedovertrek) EN 16779:2014
Veiligheidseisen en beproevingsmethode voor stootkussen voor kinderledikanten EN 16780:2014
Dekbedden (*)
Dikte,afmetingen en massa
Model, wijze van confectioneren TLM
Areïke massa vulling synthetisch dekbed ISO 3801
Afmetingen, massa en dikte TLM
Gewicht, totaal dekbed TLM
Dikte, enkel bed TLM
Dikte, all-season bed TLM
Vulgewicht dekbed TLM
Vulgewicht kussen TLM
Theoretisch vulgewicht TLM
Vulsel samenstelling
Microscopisch onderzoek (synth.) TLM
Microscopisch onderzoek gans/eend TLM
Handscheiding. (% dons en veren) Klasse 1,2 of 3 EN 12934
Diverse bepalingen
Vulkracht, los materiaal IDFB deel 10
Vulkracht, materiaal uit dekbed IDFB deel 10
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 16 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Reinigen 1-persoonsdekbed TLM
DIS Dekbed Informatie Systeem
Pakket A-dis
Pakket B-dis
Controle Kleding Pakket
Kleding wordt op 20 punten visueel gecontroleerd TLM
Kunstleder: textiel weefsel, voorzien van een coating
Pakket D: Wrijfechtheid droog en nat ISO 105 X12
Slijtweerstand, na hydrolyse ISO 12947-2
Plaktest Gebaseerd op ISO 105 E01
Hydrolyse (duurzaamheid) (m) zeven dagen bij 70°C en Rel. Vocht. 100%
Slijtweerstand ISO 12947-2
Treksterkte, twee richtingen ISO 13934-1
Lichtechtheid, per uni kleur ISO 105 B02
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 17 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Onderzoek Chemisch Norm
Compositie (*)
Grondstofsamenstelling (qualitatief per component) ISO 1833
Grondstofsamenstelling (kwantitatief per component) ISO 1833
Grondstofsamenstelling (kwantitatief en kwalitatief max 1 component) ISO 1833
Grondstofsamenstelling (kwantitatief en kwalitatief max 2 componenten) ISO 1833
Grondstofsamenstelling (kwantitatief en kwalitatief max 3 componenten) ISO 1833
Grondstofsamenstelling (kwantitatief en kwalitatief max 4 componenten) ISO 1833
Identificatie van Lamswol Microscopisch
Identificatie van Cashmere AATCC 20A, ASTM D629 Microscopie
Identificatie van Cashmere met andere dieren haren AATCC 20A, ASTM D629 Microscopie
Identificatie Kobalt vezel x ray fluorescence spectroscopy
Kleurstof analyses Chemisch
AZO kleurstoffen in leer, per kleur LFGB $35-B 82.02-2/3/4
AZO kleurstoffen in polyester, per kleur LFGB $35-B 82.02-2/3/4
AZO kleurstoffen, per kleur, per samenstelling LFGB $35-B 82.02-2/3/4
p-Aminoazobenzene (evetueel extra bij azo en allergie) LFGB $35-B 82.02-9
Allergie kleurstoffen, per kleur, per samenstelling DIN 54321
Cabcerogenic kleurstoffen, per kleur, per samenstelling DIN 54321
Disperse dye's Din 54231
Verfmethode indirect, direct, reactief etc.. TLM
Verf type zoals orange 279, black 5, etc….. Prijd per verf type TLM
Rhodamine B, CI 45170, CAS 81-88-9, EINECS 201-383-9 LC/GC-MS
Arylamines (without cleavage) DIN EN 14362 mod
Arylamines (without cleavage) poeder, Vloeistof of bijzondere matrixen DIN EN 14362 mod
Formaldehyde
Formaldehyde textiel Free, hydrolysed (water extraction method) BS EN ISO 14184-1:2011 / 64 LFGB 82.02.1
Formaldehyde textiel Released (vapour absorption method) BS EN ISO 14184-2:2011
Formaldehyde textiel determination for total or fee BS 6806:2002
Formaldehyde in leer free and hydrolyzed(water extraction method) (HPLC) ISO 17226-1
Formaldehyde in leer content liquid chromatography (colorimetry) ISO 17226-2
Formaldehyde OEKO 100 LAW 112
Formaldehyde in hout Chamber methode (1000cm2 materiaal) DIN EN 717-1
Formaldehyde in hout (gas meet methode) DIN EN 717-2
Formaldehyde in hout (fles methode) DIN EN 717-3
Formaldehyde in gips plaat EN 16000-9, 11
Formaldehyde in papier EN 645 EN 1541
Formaldehyde in waterachtige vloeistof (total) VdL-RL 03
Weekmakers
Weekmakers Phthalate all (max. 30) EN 15777
Weekmakers Phthalate DBP, DIBP, BBP, DEHP, DOP, DINP, DIDP Reach Regulation Annex XVII Weekmakers Phthalate DBP, DIBP, BBP, DEHP, DOP, DINP, DIDP, DHNUP, DMEP, DIPP, N-Pentyl-isopentylphthalte, Dipentylphthalate Reach Regulation Annex XVII +SVHC candidate list
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 18 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Weekmakers Phthalate according to CPSIA CPSC-CH-C1001-09-1
Weekmakers Phthalate Speelgoed verordering
Weekmakers Determination of loss of plasticizers DIN EN ISO 176
Weekmakers Determination of migration of plasticizers DIN EN ISO 177
Weekmakers Determination of absorption of plasticizer at room temperature ISO 4608
Ph bepaling
pH waarde leer DIN EN ISO 4045
pH waarde textiel DIN EN ISO 3071
Reuk - Odour proef
Reukproef SNV SNV 195651
Reukproef PHK PHK
Reukproef VOC GC/MS screening VOC
Reukproef odour proef Din EN 13725
Reukproef odour proef VDI 3882
Reukproef odour proef VDA 270
Reukproef odour proef ISO 5497
Reukproef odour proef ISO 5496
Reukproef odour proef ISO 8586
Reukproef odour proef ISO 13301
Reukproef odour proef Din ISO 4120
Reukproef odour proef DIN 10950
Reukproef odour proef DIN 10954
Reukproef odour proef DIN 10961
Reukproef odour proef DIN 10963
Reukproef odour proef DIN 10964
Reukproef odour proef Din 10966
French VOC Label na 28 dagen meting DEVL1104875A EN 16000-6 -9 -11 -3
Belgien VOC Label na 28 dagen meting DEVL1104875A EN 16000-6 -9 -11 -3
German VOC Label na 3 en 28 dagen meting AgBB/DIBt EN 16000-6 -9 -11 -3
German VOC Label na 3 en 28 dagen meting AgBB/DIBt/KMR EN 16000-6 -9 -11 -3
Emissions and odour leather
Total carbon emission (TVOC) VDA 277
Thermal desorption VOC and FOG total amount VDA 278
Thermal desorption VOC and FOG incl. CD VDA 278
Formaldehyde emission VDA 275
Odour 23°C x 24 h (damp) VDA 270 A1, B1 or C1
Odour 40°C x 24 h (damp) VDA 270 A2, B2 or B3
Odour 80°C x 2 h (dry) VDA 270 A3, B3 or C3
Odour SAE J 1351
Fogging DIN 75201 and others
Fogging DIN EN 14288
Fogging Visibility ISO 6452
Fogging change in mass ISO 6452
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 19 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Metalen As, Pb, Cd, Hg, Cu, Cr ges, Co, Ni, Sb, etc.
Zware metalen per metaal, via waterige extractie As, Pb, Cd, Hg, Cu, Cr ges, Co, Ni, Sb EPA 1620
Zware metalen totaal 8-13, via waterige extractie EPA 1620
Zware metalen per metaal, totale oplossing van product EPA 1620, EN 1122
Zware metalen totaal 8-13, totale oplossing van product EPA 1620, EN 1122
Cadmium totale bepaling EN 1122
Cadmium LFGB $35 80.03
Chroom 6 (textiel) ISO 11083
Chroom 6 (leer) EN 420
Chromium VI content in Leather EN ISO 17075
Chromium VI content includin 24Hours preheatment in oven for Leather EN ISO 17075
Chromium VI content in chrome tanning agents for leather
Nikkel amount EN 1811
Nikkel coated areas/amount EN 12472 / 1811
Nikkel rubbing test EN 12471
Lood bepaling individuele bepaling Extractie DIN EN ISO 17294-2
Lood bepaling totale bepaling EN1122
Elementen analyse incl onsluiting in house
Metaal migratie volgens Oekotex EN 17294
Metalen in verpakking Chroom, Lood, Cadmium en Kwikzilver EU verpakkings richtlijn
ROHS ROHS
Heavy metal, contents Leather ISO 17072-2
Heavy metal, elutable Leather ISO 17072-1
Contents and chemical parameters leather
Volatile substances EN ISO 4684
Ashes Leer/textiel (total, sulphated /water insoluble, sulphated) EN ISO 4047
Ashes Kunstleer/kunststof (total, sulphated /water insoluble, sulphated) EN ISO 4047
Fat content (dichloromethane extract) EN ISO 4048
Water soluble substances / elution EN ISO 4098
Chromium oxide content EN ISO 5398-1 (chrome leather);
Chromium oxide content EN ISO 5398-2 (FOC-leather)
Collagen content QMA 2003 (hydroxyproline method)
Amid nitrogen detection QMA 2013
Total nitrogen content DIN 53308*
Chloride QMA 2015
Aldehydes (e.g. formaldehyde, acetaldehyde, glyoxal, glutaraldehyde) EN ISO 17226
Hazardous substances in leather and collagen Pentachlorophenol / chlorinated phenols (PCP, TriCP, TeCP) ISO 17070
Biocides (TCMTB, OIT, CMK, OPP) Tegewa method / in-house method
Hydrolyse onderzoek 168 uur/70°C/95%-98%RV incl. aansluiten 5000 knikken In house methode
Chemicals and chemicla products Nitrogen, sulphur, chloride, bromide, iodide, and fluoride by the Lassaigne Sodium Fusion test Documented In-House Method ICL/QM/P004
Nitrogen, sulphur, chloride, bromide, iodide, and fluoride by the Lassaigne Sodium Fusion test NFX 70-1000-1 Appendix A:2001
Nitrogen, sulphur, chloride, bromide, iodide, and fluoride by the Lassaigne Sodium Fusion test BS EN 50305:Clause 9.2.1:2002
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 20 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Diverse
Breed spectrum anaylse ( algemeen) GC/MS
AP/APEO Alkylphenols (NPEO, OPEO, OP, NP) Oeko Guidline TLM
Biocide finishing GC/MS
Chlorinated Carrier E Din NMP 512
DP bepaling EWN Methode (viscositeit) ketting of inslag Din 54270-3, SNV 195598
DP bepaling EWN Methode (viscositeit) ketting en inslag Din 54270-3, SNV 195598
organisch oplosmiddelen in textiel DIN 54278-1
Vetgehalte NEN 6175
Vetgehalte NEN 3074
Uitwasbare bestandelen DIN 53307
PVC aantonen Beilsteinprobe
PCP Penthachlorphenol (TeCP) LMBG 64 B 82.02-8
TCP Tetrachlorphenol LMBG 64 B 82.02-8
TRiCP Trichlorphenol LMBG 64 B 82.02-8
Nonylphenol GC/MS
Nonylphenolethoxylate GC/MS
Pestizide EPA M 8270C; 3545
PCB Polychlorinated biphenyles EPA 8082, 3545
Pyrethroide GC/MS
PAK PAH Polycyclic armatic hydrocabons GC/MS
TBT Tributylzinn DIN 38407-13
DBT Dibutylzinn DIN 38407-13
MBT Monobutylzinn DIN 38407-13
Triclosan TLM
UV bescherming Din EN 13758-1 vanaf
AOX analyse TLM
Fluor (F) IC (ionenchromatografie)
FCKW (Fluor-Chlor-Kohlen-Wasserstoffe) TLM
Vlam vertragend middel (algemeen) GC/MS
Vlam vertragend middel (brominated) GC/MS
Organic tin compounds ISO 17353
Dioxine TLM
Brandvertagendmiddel kinderspeelgoed DIN EN 71-9
Aloe Vera in textiel bepaling TLM
DMFur Dimethylfumarate (antischimmel middel leer) GC-MS
Nitrosamine Nitrosaminen N-NA detectie EN 12868
Nitrosamine Nitrosaminen N-DELA detectie EN 12868
Formamide, cas 75-12-6 GC/MS
Methylformamide, cas 123-39-7 GC/MS
N,N-dimethylformamide, cas 68-12-2 GC/MS
PFOA / PFOS Perfluoroktansäure/Perfluorooctanylsulfonate LC/MS
Nonylfenol GC/MS
Beschermende kleding voor plant bestrijdings middelen DIN EN 14786
Benzidine, 4,4'-diaminobifenyl, cas: 92-87-5 GC/MS
nonylfenolethoxylaten (NFn, NFE’s) GC/MS
Teflon aantonen ( alleen mogelijk bij ruime aanwezigheid) GC/MS
FTIR analyse
UV-VIS analyse
TGA analyse
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 21 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
DSC analyse
Benzeen, Benzol, Bezene CAS 71-43-2 GC/MS
Appret analyse textiel (wel of niet aanwezig) DIN 54278-1
Appret kwantitatieve analyse textiel DIN 54285
Compostering van verpakkings materialen EN 13432
Determination of hydrocarbons from mineral oil (MOSH & MOAH) phase extraction and GC-FID
Fluor in water oplosbaar XP H60-160
trichloorethyleen EN 71-9-10-11
Identificatie en quatificering van plantaardige Tannines(gerbstoffe, Looizuur) in Leer HPTLC
Specials excl validatie (1900 euro)
Phenol GCMS
Triethanolamine GCMS
Permetherin (gevalideerd voor hout en haren) GCMS
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 22 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Onderzoek Brand Norm
Brandproeven gordijnen (**)
Gordijnen excl. wassen IMO A 563 (14) / FTP 2010 Part 7
Surface Ignition requirements LOW, as received BS 5867-2 type A
Surface Ignition requirements Medium, as received BS 5867-2 type B
Surface Ignition requirements High, as received BS 5867-2 type C
Surface Ignition requirements High, incl. 50* wassen BS 5867-2 type C incl. 50 wasbeurten
Ignitability without pre-treatment EN 1101
Rate of flame spread, without pre-treatment EN 1102
Gordijnen excl. wassen EN 13772
Gordijnen classificatie 1 t/m 3 voor en na 12* wassen EN 13773 (EN1101 EN13772)
Gordijnen classificatie 1 t/m 3 voor en na 6* chemisch reinigen EN 13773 (EN1101 EN13772)
Gordijnen classificatie 4 t/m 5 incl. 1* Wassen EN 13773 (EN1101 EN1102 )
Gordijnen classificatie 4 t/m 5 incl. 1* chemisch reinigen EN 13773 (EN1101 EN1102 )
Marqueess ans Similar BS 7837
Brandproeven speelgoed (**)
Speelgoed BS EN 71-2
Speelgoed ASTM F963-11
Brandproeven meubels, vulling en meubelstof (***)
Furniture & Furnishing (Fire) (Safety) Regulations 1988 Cover fabrics: Cigarette resistance - zichtbare delen, Visible § Schedule 4, part 1
Cover fabrics: Match resistance - zichtbare delen, Visible § Schedule 5, part 1
Loose fabrics: Match resistance Schedule 5, part 2
Non visible covers: Cigartte resistance Schedule 4, part 2
Non visible covers: Match resistance Schedule 5, part 3
Non visible covers: Match resistance + Cigartte resistance Schedule 5, part 3 + Schedule 4, part 2
Filling materials: Single filling, Slab foam Schedule 1, part 1
Filling materials: Single filling, Crumb foam Schedule 1, part 2
Filling materials: Single filling, Latex foam Schedule 1, part 3
Filling materials: Single filling, non foam fillings Schedule 2, part 1
Composite filling: Seating Schedule 2, part 2
Composite filling: Pillows/cushions Schedule 2, part 3
Composite filling: Mattresses Schedule 2, part 4
Interliner fabric Schedule 3
Tear down charge Assembled furniture only
Was behandeling meerprijs voor bovenstaande testen
Valuation of allumability of the padded furniture 1 or 2 colors NF D 60-013 (AM18)
Valuation of allumability of the padded furniture 3 colors NF D 60-013 (AM18)
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 23 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Cover Fabrics Beklede meubelen Domestic ( Alleen cigarette) BS EN 1021-1
Beklede meubelen Domestic ( Alleen lucifer) BS EN 1021-2
Beklede meubelen Domestic ( cigarette en lucifer) BS EN 1021-1 en 2
IMO Upholstry IMO A 652(16)
Beklede meubelen Domestic ( source 2-3 ) BS EN 5852: P2 Source 2-3
Beklede meubelen Domestic ( source 4-5 ) BS EN 5852: P2 Source 4-5
Beklede meubelen Domestic ( source 6-7 ) BS EN 5852: P2 Source 6-7
Was behandeling meerprijs voor bovenstaande testen
Non-domestic furniture Beklede meubelen NON Domestic ( low hazard ) BS 7176
Beklede meubelen NON Domestic ( medium hazard ) BS 7176
Beklede meubelen NON Domestic ( high hazard ) BS 7176
Beklede meubelen NON Domestic ( verry high hazard ) BS 7176
Teardown toeslag voor complete meubel ( verplicht )
Was behandeling meerprijs voor bovenstaande testen
Rolstoelen(**) Fire test for seating wheelchair Horizontal EN ISO 7176-16
Fire test for seating wheelchair Vertical EN ISO 7176-16
US Furniture(*) California Technical bulletin 117 vervangen door TB 117:2013 CAL 117 sec A
California Technical bulletin 117 vervangen door TB 117:2013 CAL 117 sec D
California Technical bulletin 117 vervangen door TB 117:2013 CAL 117 sec E part 1 (using CS 191-53)
California Technical bulletin TB 117:2013 of Cal 117:2013 TB 117:2013
UFAC FABRIC CLASSIFICATION TEST METHOD—1990 UFAC
Brandproeven, dekbedden, kussens (**)
Sigaret +kleine vlam, onderkant kussens (Source 0 en 1) prijs per tests 1 zijde BS 7175:1989 Sigaret +kleine vlam, bovenkant kussens (Source 0 en 1) prijs per tests 1 zijde BS 7175:1989
Source 5 (crib 5) kussens prijs per tests 1 zijde BS 7175:1989
Sigaret + vlamtest dekbedden (excl. 5* wassen verplicht) prijs per tests 1 zijde ISO 12952-pt1
Sigaret + vlamtest dekbedden (excl. 5* wassen verplicht) prijs per tests 1 zijde ISO 12952-pt2
classificatie volgens EN 14533:2003 Ziekenhuis dekens van Wol en/of syntetisch materiaal incl. 3* wassen, aan 1 zijde getest. BS 5866 part 4 Ziekenhuis dekens van katoen en/of cellular incl. 800* wassen, aan 1 zijde getest. BS 5866 part 4 Ziekenhuis sheets van Wol en/of syntetisch materiaal incl. 3* wassen, aan 1 zijde getest. BS 5815 part 3 Ziekenhuis sheets van katoen en/of cellular incl. 200* wassen, aan 1 zijde getest. BS 5866 part 4
Toeslag 5* wassen
Brandproeven, matrassen en bed onderstel (***)
Ontvlambaarheid (LOW hazard) BS597-1-2 BS 7177
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 24 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Ontvlambaarheid (MEDIUM hazard) BS597-1-2 en BS6807 crib 5 BS 7177
Ontvlambaarheid (HIGH hazard) BS597-1-2 en BS6807 crib 5+7 BS 7177
Cigarette (source 0) BS EN 597-1
Match (source 1) BS EN 597-2
Cigarette + Match (source 0+1) BS EN 597-1+2
Ontvlam baarheid source 2 BS 6807
Ontvlam baarheid source 3 BS 6807
Ontvlam baarheid source 4 BS 6807
Ontvlam baarheid crib 5 BS 6807
Ontvlam baarheid crib 7 boven of onder BS 6807
Bed toebehoren matrassen kussens IMO A.688(17) / FTP 2010 part 9
Flammability of matrassen CPSC 16 CFR 1633
Brandproeven, wandbekleding / transport (**)
Reaction to fire tests. Spread of flame ISO 5658
Fire Test Procedures Code Res MSC 61 (67)
Oppervlakte test IMO A.653(14)
Fire precautions BS 6853
Burning behaviour of interior materials for motor vehicles. BS AU 169
Optical density of the smoke ASTM E662
Brandgedrag bekleding stoelen vliegtuig CAA / FAR 25.853
Flammability EASA CS25.853, appendix F:Pt-1
Fire behavior of automotive components FMVSS 302, NF P92-505, EN6941 95/28/EG
Brandproeven, leer, textiel, kunststoffen….
Brandtest horizontaal Flammability of Interior materials DIN 75200
Brandtest horizontaal Flammability of Interior materials FMVVS 302
Brandtest horizontaal Flammability of Interior materials Volvo STD 104 0001
Brandtest TL1010
Brandproeven bouwgerelateerde producten Europese(**) Brandgedrag Classificeren volgens A1, A2, B,C,D,E,F S1/S2/S3 EN 13501-1
SBI onderzoek verticale delen en plafonds EN 13823
750 graden oven proef DIN EN ISO 1182
Bomb Calorimeter Indicatief ISO 1716
Bomb Calorimeter formele test eerste laag van een sample ISO 1716
Bomb Calorimeter formele test iedere volgende laaag van het sample ISO 1716
Micro scale Calorimeter (PCFC) Astm D-7309
Sloten DIN 18089-1
Bepaling van de brandwerendheid - Deel 1: Algemene eisen EN 1363-1 Bepaling van de brandwerendheid - Deel 2: Alternatieve en aanvullende procedures EN 1363-2
Bepaling van de brandwerendheid van niet-dragende bouwdelen - Deel 1: Wanden EN 1364-1 Bepaling van de brandwerendheid van niet-dragende bouwdelen - Deel 2: Plafonds EN 1364-2 Bepaling van de brandwerendheid van niet-dragende bouwdelen - Deel 3: Vliesgevels EN 1364-3
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 25 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Bepaling van de brandwerendheid van niet-dragende bouwdelen - Deel 4: Vliesgevels - Gedeeltelijke configuratie EN 1364-4
Bepaling van de brandwerendheid van dragende bouwdelen - Deel 1: Wanden EN 1365-1 Bepaling van de brandwerendheid van dragende bouwdelen - Deel 2: Vloeren en daken EN 1365-2
Bepaling van de brandwerendheid en rookbeheersing van deuren, luiken, te openen ramen en hang- en sluitwerk - Deel 1: Beproeving van de brandwerendheid van deuren, luiken en hang- en sluitwerk EN 1634-1 Bepaling van de brandwerendheid en rookbeheersing van deuren, luiken, te openen ramen en hang- en sluitwerk - Deel 2: Brandwerende typeringsproef voor hang- en sluitwerk EN 1634-2 Bepaling van de brandwerendheid en rookbeheersing van deuren, luiken, te openen ramen en hang- en sluitwerk - Deel 3: Beproeving van de weerstand tegen rookdoorgang van deuren en luiken EN 1634-3
Analysis of pyrolysis and combustion gases-pipe still method NF X70-100-1 Analysis of gaseous effluents — Part 2: tubular furnace thermal degradation method. NF X70-100-2
I rating NFF 16-101
F rating: NFF 16-101
Oxygen Index test (1 test) NF T 51-071
Glow wire test (1 test) NF EN 60695-2-1-10/11/12 ( NF C 20-455)
F rating:
Opacity of smoke NF X 10-702
NEN 6066 is vervangen door de EN 13501-1 S1/S2/S3 NEN 6066
NEN 6065 is vervangen door de EN 13501-1 A2/B/C/D NEN 6065
NEN 6064 is vervangen door de EN 13501-1 A1/A2 NEN 6064
NEN 1775 is vervangen door de EN 13501-1 Flooring A2fl/Bfl/Cfl/Dfl S1/S2 NEN 1775
Brandgedrag voor dakbedekking EN1187
Test methods for external fire exposure to roofs DIN EN 1187
Brandgedrag (schoorsteen) EN13502-5
Fire Tests Onorm A3800-1
Standard test methods for fire tests od roof covering UL 790
Brandproeven tenten Nederland(**)
Brand gedrag van tenten met een oppervlakte van >25 m2 NEN 8020-41
Brand gedrag van tentdoek EN 14115
Brandproeven bouwgerelateerde producten Duitsland(**)
B1 klasse prijs vanaf DIN4102-1
B1 klasse prijs vanaf DIN4102-2
B1 klasse prijs vanaf DIN4102-3
B1 klasse prijs vanaf DIN4102-4
B1 klasse prijs vanaf DIN4102-5
B1 klasse prijs vanaf DIN4102-6
B1 klasse prijs vanaf DIN4102-7
B1 klasse prijs vanaf DIN4102-8
B1 klasse prijs vanaf DIN4102-9
B1 klasse prijs vanaf DIN4102-10
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 26 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
B1 klasse prijs vanaf DIN4102-11
B1 klasse prijs vanaf DIN4102-12
B1 klasse prijs vanaf DIN4102-13
B1 klasse prijs vanaf DIN4102-14
B1 klasse prijs vanaf DIN4102-15
B1 klasse prijs vanaf DIN4102-16
B1 klasse prijs vanaf DIN4102-17
B2 klasse vooronderzoek voor B1 prijs vanaf DIN4102-B2 Testing of combustible materials; response to ignation by a small flame; general date DIN 53438-1 Testing of combustible materials; response to ignation by a small flame; edge ignition, K1, K2, K3 classe DIN 53438-2 Testing of combustible materials; response to ignation by a small flame; surface ignition, F1, F2, F3 classe DIN 53438-3
Determination of burning behaviour using a ga burne DIN 54837 2007-12
A1 klasse prijs vanaf DIN4102-A1
A2 klasse prijs vanaf DIN4102-A2
Brandproeven bouwgerelateerde producten Frankrijk/Belgie(**) Brandgedrag Epiradiatorcabine NF-P92-501
Brandgedrag Epiradiatorcabine volledige test (M1 / M4) NF-P92-501
Brandgedrag Epiradiatorcabine orienterende test (M1 / M4) NF-P92-501
Brandgedrag Epiradiatorcabine orienterende test (M0 / M4) NF-P92-501 + ISO 1716
M1 Brandgedrag Elektrische brander orienterend NF-P92-503/504
M1 Brandgedrag Elektrische brander NF-P92-503
Fire propagation test NF-P92-504
Thermo fusible materials NF-P92-505
Accelarated ageing test for seat covering NF-P92-512
Accelarated ageing test for washable textile NF-P92-512
Accelarated ageing test for non washable textile but dry cleaning NF-P92-512
Accelarated ageing test for non washable and non dry cleaning NF-P92-512
Certificaat kosten engels NF-P92-505
Brandproeven bouwgerelateerde producten vloeren flooring (**)
Brandgedrag Classificeren volgens flooring A1fl, A2fl, Bfl,Cfl,Dfl,Efl,Ffl S1/S2 EN13501-1fl
Vloeren (Vloerbedeking) warmte bron EN9239-1
Vloeren (Vloerbedeking) met een warmte stroom van 25kW/m2 EN9239-2
Brandgedrag (behalve voor vloeren, non floorings) Loose laid BS 476: part 6
Brandgedrag (behalve voor vloeren, non floorings) fully Adhered BS 476: part 6
Brandgedrag (behalve voor vloeren, non floorings) Loose laid BS 476: part 7
Brandgedrag (behalve voor vloeren, non floorings) fully Adhered BS 476: part 7
Vloeren, Floorings EN ISO 9239: part1
Vloeren, Floorings BS 4790
Vloeren, Floorings BS 5287
Vloeren, Floorings BS 6307
Vloeren, Floorings ASTM E648
Vloeren, Floorings 16 CFR 1631
Brandproeven vertikaal (**)
Verticale textiel brandtest DIN 53906
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 27 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Zijkanten textiel brandtest DIN 54336
vloerdelen textiel brandtest DIN 54332
Test voor bovendek coatings IMO A.687(17)
Brandproeven Apparel/Kleding(**)
Brandtest kleding Ned. Bepaling per 1 mei 2008 verplicht ASTM D-1230
Brandtest kleding US Flammability of wearing Apparel 16 CFR part 1610
Brandtest kleding US Flammability of wearing Apparel incl. voorbehandeling 16 CFR part 1610 Brandtest kleding US Flammability of wearing Apparel incl. voorbehandeling, Grondstof, Gewicht 16 CFR part 1610
Brandtest kleding Flammability of wearing Apparel FTMS 191-5908
Brandtest kleding Flammability of wearing Apparel CALIF TB-117
Brandtest kleding Flammability of wearing Apparel NFPA 702
Verticaal, een richting ISO 6941
Verticaal, twee richtingen ISO 6941
Verticaal, gemak van ontsteking ISO 6940
Verticaal, randonsteking DIN 54336
Horizontaal, autobekleding ISO 3795:1989
HTI index EN 367:1992
Bescherming tegen stralingswarmte ISO 6942:2002
Brandgedrag small scale methode 1 (indour materials) NFPA 701
Brandgedrag large scale methode 2 (outdoor materials) NFPA 701
Mimimum Ignition time Face igniation BS 5438 test 1A
Mimimum Ignition time Edge igniation BS 5438 test 1A
Limited flame spread face igniation BS 5438 test 2A
Limited flame spread Edge ignition BS 5438 test 2B
Rate of spread of flame Face igniation BS 5438 test 3A
Rate of spread of flame Edge ignition BS 5438 test 3B
Surface Flash zonder wassen geconditioneerd BS 4569
Surface Flash gedroogd in de oven na wassen BS 4569
Flammability fabrics AS2755-1
Flammability fabrics AS2755-2
Flame Resistance of Textiles (Vertical Test) excl. washing ASTM D-6413
Flammability of nightwear Nachtkleding Nederlands covenant excl. Wassen NEN 1722
Nachtkleding (nightwear safety regulations 1985) incl 1* wassen BS 5722
Nachtkleding (nightwear safety regulations 1985) incl. 12* wassen BS 5722
US Flamability od sleepwear 16 CFR 1615
US Flamability od sleepwear 16 CFR 1616
Nachtkleding Iris nightwear covenant excl. Wassen IS 148
Brandgedrag fabric EN 1103
Brandgedrag fabric na wassen EN 1103
Nachtkleding/kinderkleding (6 samples per item) NEN 14878:2007
Flammability of sleepwear NFG-07-184
Flammability of sleepwear DOC FF 3-71
Flammability of sleepwear CPSC 16 CFR 1615
Flammability of sleepwear CPSC 16 CFR 1616
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 28 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Brandproeven beschermende kleding (**)
Beschermende kleding EN 11612 (EN 531) (alleen code A)
Beschermende kleding EN 15025 (EN 532)
Beschermende kleding EN 14116 (EN 533)
Beschermende kleding EN 14116 (EN 533) (na wassen)
Brandweerkleding EN 469:2005 clause 6,1 flame spread
Small splaches of molten metal EN 348 ISO 9150
Convective heat transfer ISO 9151
Convective heat transfer met 5 was behandelingen EN 367 ISO 9151
Radiant heat transfer EN 366 EN ISO 6942
Molten metal splash EN 373 ISO 9185
Flammability EN 532 EN ISO15025
Contact heat EN 702 ISO 12127
Brand werende dekens oriënterende test brand test EN 1869
Brand werende dekens complete test EN 1869
Brandproeven auto interieur (**)
Brandproeven auto interieur Din 75200
Brandproeven auto interieur ISO 3795
Brandproeven auto interieur FMVSS 302
Brandproeven auto interieur 49 CFR 571,302
Special standaarden auto industrie (automotive) DBL 5307,10
Special standaarden auto industrie (automotive) VW TL 1010
Special standaarden auto industrie (automotive) BMW GS 97038
Special standaarden auto industrie (automotive) GMW 3232
Special standaarden auto industrie (automotive) VOLVO STD 5031.1
MVSS 302, 2 kanten SAE J369
Special standaarden auto industrie (automotive) PV 3904
Special standaarden auto industrie (automotive) BMW N 601210
Special standaarden auto industrie (automotive) PTL 8501
Special standaarden auto industrie (automotive) GME 60261
Special standaarden auto industrie (automotive) FIAT 7-G2000
Special standaarden auto industrie (automotive) MS 300-08
Special standaarden auto industrie (automotive) TSM 0500G
Special standaarden auto industrie (automotive) STD 5031,1
Special standaarden auto industrie (automotive) VCS 5031,19
Special standaarden auto industrie (automotive) VOLVO STD 104-0001
Brandproeven kunsststof (**)
Kunststof UL94 V0, V1, V2
Kunststof UL94 5V-A
Kunststof UL94 5V-B
Kunststof UL94 HB
Kunststof granulaat UL94 HB *granulaat*
Schuim UL94 HBF
Schuim UL94 HF-1
Schuim UL94 HF-2 Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure Kunststof IEC 60695-2-10
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 29 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products Kunststof IEC 60695-2-11 Glowing/hot-wire based test methods – Glow-wire flammability index (GWFI) test method for materials Kunststof IEC 60695-2-12 Fire hazard testing – Part 2-13: Glow/hot-wire base test methods – Glow-wire ignition temperature (GWIT) test method for materials Kunststof IEC 60695-2-13
Fire hazard testing – Part 10-2: Abnormal heat – Ball pressure test IEC 60695-10-2 Needle-flame test method - apparatus, confirmatory test arrangement and guidance IEC 60695-11-5
50 W horizontal fame test methods IEC 60695-11-10 HB
500 W flame test methods IEC 60695-11-20
500 W flames - apparatus and confirmational test methods IEC 60695-11-3
Brandproeven diverse (**)
brandgedrag textile/pvc/ marguees BS 7837
Bepaling van vlambaarheid met 6 branders *** EN 13274-4 methode 3
Cone calorimeter test ISO 5660
requirements for the safety of sleep bags BS 8510
Bepaling brandgedrag dmv zuurstofindex EN 4589-2
Bepaling rookgas dichte voor niet voor metalen componenten EN 2824
Flammability for Wallcoverings 10 min. Class A(1), B(2), C(3) ASTM E84 Flammability for Wallcoverings 30 min. Extended version. Class A(1), B(2), C(3) ASTM E84-08
Classificeren T1, T2, T3, T4 na uitvoeren EN 15619
Brandproeven treinen etc. (**) Fire performance requirements for materials and products used on railway vehicles CEN TS 45545-2 Fire performance requirements for materials and products used on railway vehicles DIN EN 45545-2
Brandwerendheid van brandschotten en scheidingswanden E DIN EN 45545-3
Brandproeven Scheepvaart/Marine etc. (**)
Non-combustibility test oriënterend IMO FTPC 1 deel 1 oriënterend
Non-combustibility test homogeen IMO FTPC 1 deel 1 (ISO 1182)
Non-combustibility test niet homgeen IMO FTPC 1 deel 1 (ISO 1182)
Non-combustibility test per orgnisch deel (meerkosten) IMO FTPC 1 deel 1 (ISO 1182)
Smoke and toxicity test vanaf IMO FTPC 1 deel 2 (ISO 5659-2)
Fire resistance test for for fire resistance divisions IMO FTPC 1 deel 3 (IMO A.754(18)) B15 en A- deck
Fire resistance test for for fire resistance divisions IMO FTPC 1 deel 3 (IMO A.754(18)) B15 Schott
Fire resistance test for for fire resistance divisions IMO FTPC 1 deel 3 (IMO A.754(18)) A-60 Schott
Fire resistance test for for fire door closing mechanisms IMO FTPC 1 deel 4
Surface flammability orienterend IMO FTPC 1 deel 5 (IMO A.653(16)\ and IMO A.687(17)
Surface flammability IMO FTPC 1 deel 5 (IMO A.653(16)\ and IMO A.687(17)
Primary deck coverings oriënterend IMO FTPC 1 deel 6 (IMO A.653(16))
Primary deck coverings IMO FTPC 1 deel 6 (IMO A.653(16))
Vertical supported textiles and films IMO FTPC 1 deel 7 (IMO A.471 (12) and IMO A.563(14))
Upholstered compsites for seating IMO FTPC 1 deel 8 (IMO A.652(16))
Bedding, matrases IMO FTPC 1 deel 9 (IMO A.688(17))
Producten voor in de magnetron
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 30 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Produkten voor in de magnetron vanaf BS 8433
Produkten voor in de magnetron per component per onderdeel EM71 part 3 is ondedeel van BS 8433
Brandproeven voor Kabels etc. (**)
Smoke density electric cables BS 7622:Part 1:1993
Smoke density electric cables BS 7622:Part 2:1993
Smoke density electric cables IEC 1034:Part 1:1990
Smoke density electric cables IEC 1034:Part 2:1991
Measurement of smoke density of cables burning under defined conditions IEC 61034-1 (2005)
Measurement of smoke density of cables burning under defined conditions BS EN 61034-1:2005
Measurement of smoke density of cables burning under defined conditions IEC 61034-2(2005)
Measurement of smoke density of cables burning under defined conditions BS EN 61034-2:2005
Measurement of smoke density of cables burning under defined conditions BS EN 50268-1:2005
Smoke emission Def Stan 61-12(Part 0)/Issue 1/Para 13.42 Code of practice for fire precautions in the design and construction of passenger carrying trains BS 6853:1999: Annex D: 8.7
Toxicity NES 713
Toxicity Def Stan 61-12(Part 0)/Issue 1/Para 13.43
Toxicity Def Stan 61-12(Part 31)/Issue 2:2006
Toxicity Def Stan 02-713 (2006)
Tests on electric and optical fibre cables under fire conditions EN DIN 60332-1-2
Tests on electric and optical fibre cables under fire conditions VDE 0482-332-1-2
Tests on electric and optical fibre cables under fire conditions EN DIN 60332-1-3
Tests on electric and optical fibre cables under fire conditions VDE 0482-332-1-3
Tests on electric and optical fibre cables under fire conditions EN DIN 60332-2-1
Tests on electric and optical fibre cables under fire conditions VDE 0482-332-2-1
Tests on electric and optical fibre cables under fire conditions EN DIN 60332-2-2
Tests on electric and optical fibre cables under fire conditions VDE 0482-332-2-2
Tests on electric and optical fibre cables under fire conditions IEC 60332-3-21
Tests on electric and optical fibre cables under fire conditions IEC 60332-3-22
Tests on electric and optical fibre cables under fire conditions IEC 60332-3-23
Tests on electric and optical fibre cables under fire conditions IEC 60332-3-24
Tests on electric and optical fibre cables under fire conditions IEC 60332-3-25
Tests on electric and optical fibre cables under fire conditions IEC 60331-11
Tests on electric and optical fibre cables under fire conditions IEC 60331-21
Tests on electric and optical fibre cables under fire conditions EN Din 61034-1
Tests on electric and optical fibre cables under fire conditions EN Din 61034-2
Tests on electric and optical fibre cables under fire conditions UIC 564-2 bijlage 9
Tests on electric and optical fibre cables under fire conditions BS 6853 tabel 13 en 14
Tests on electric and optical fibre cables under fire conditions BS 6853 tabel 13 en 14 en bijlage D.8.7
Electrical installations in ships: Definitions and general requirements IEC 60092-101
Common test for cables under fire conditions EN 50399
Tests on electric and optical fibre cables under fire conditions EN DIN 50200
Tests on electric and optical fibre cables under fire conditions VDE 0482-200
Tests on electric and optical fibre cables under fire conditions EN DIN 50362
Tests on electric and optical fibre cables under fire conditions VDE 0482-362
Tests on electric and optical fibre cables under fire conditions EN DIN 50266-2-1
Tests on electric and optical fibre cables under fire conditions EN DIN 50266-2-2
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 31 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Determination of degree of acidity of gasen for cables EN DIN 50266-2-3
Tests on electric and optical fibre cables under fire conditions EN DIN 50266-2-4
Tests on electric and optical fibre cables under fire conditions EN DIN 50266-2-5
Tests on electric and optical fibre cables under fire conditions EN DIN 50305 9.1
Tests on electric and optical fibre cables Toxicity test EN DIN 50305 9.2
Tests on electric and optical fibre cables under fire conditions VDE 0482-305
Tests on electric and optical fibre cables under fire conditions BS 4066: part1
Tests on electric and optical fibre cables under fire conditions BS 4066: part2
Tests on electric and optical fibre cables under fire conditions BS 4066: part2
Tests on electric and optical fibre cables under fire conditions UL 1581 FT1
Tests on electric and optical fibre cables under fire conditions IEE 1202
Tests on electric and optical fibre cables under fire conditions IEEE 383
Tests on electric and optical fibre cables under fire conditions UL 1581 clause 1060
Tests on electric and optical fibre cables under fire conditions UL Clause 1164
Combustian Gases kabels Test on gases evolved during combustion of materials from cables EN DIN 50267-1
Test on gases evolved during combustion of materials from cables EN DIN 50267-2-1
Test on gases evolved during combustion of materials from cables EN DIN 50267-2-2
Test on gases evolved during combustion of materials from cables EN DIN 50267-2-3
Test on gases evolved during combustion of materials from cables IEC 60754-1
Test on gases evolved during combustion of materials from cables IEC 60754-2
Test on gases evolved during combustion of materials from cables IEC 60754-2-am1
Test on gases evolved during combustion of materials from cables IEC 754-1
Test on gases evolved during combustion of materials from cables IEC 754-2
General materials for construction of railway passenger stock and building constructions
Flammability Temperature Index BS 6853:1987 Appendix A
Flammability Temperature Index ISO 4589-3
Flammability Temperature Index ISO 4589: part3: annex A
Fire Safety Performance of Materials London Underground Limited Standard Cat 1, No 2-01001-002:2003
Fire Safety Performance of Materials LUL 1-085 issue A2
Fire Safety Performance of Materials LUL 1-085:A3:2011
Fire Safety Performance of Materials BR 252 Appendix A
Fire Safety Performance of Materials CEN/TS 45545-2
Fire Safety Performance of Materials DIN 5510:2009:Annex C
Smoke Emissions BS 6853:1987 Appendix B
Smoke Emissions BS 6853:1999 Annex D
Smoke Emissions BS 6401:1983
Smoke Emissions NES 711:Jan 81
Smoke Emissions Def Stan 02-711:Apr 2000
Smoke Emissions Def Stan 02-711:issue 2:2006
Smoke Emissions ASTM F814-84
Smoke Emissions prEN 2824:1994
Smoke Emissions prEN 2825:1991
Smoke Emissions prEN 2826:1994
Smoke Emissions NFX 10-702-1:1995
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 32 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Toxicity BS 6853:1999 annex B1
Toxicity BS 6853:1999 annex B2
Toxicity NFX 70-100
Toxicity DIN EN 50306-1 3.3 (verwijst naar NFX 70-100)
Spread of Flame FMVSS 302
Spread of Flame GB8410 National Standard of the People’s Republic of China
General materials for transport and building construction Toxicity index NES 713:1985
Toxicity index Def Stan 02-713: Apr 2006
Oxygen Index NES 714:1982
Oxygen Index ISO 4589-2:1996 Amd. 2005
Oxygen Index BS EN ISO 4589-2:1999
Flammability Temperature Index NES 715:1980
Flammability Temperature Index BS 2782:Part 1:1989 Method 143A and 143B
Flammability Temperature Index BS EN ISO 4589-3:1996
Building materials and structures Reaction to Fire BS 476:Part 15:1993
Reaction to Fire ASTM E 1354:2009
Heat release ISO 5660-1:2002
Heat release ISO 5660-2:2002
Spread of Flame BS ISO 5658-2:2006
Smoke test BS ISO 5659-2:2006
Smoke test ASTM E1321-2009
Single flame source test BS EN ISO 11925-2:2010
Single flame source test BS EN 13501-6:2014
Generals materials aircraft interiors Smoke Density ABD 0031:1996 (2005)
Smoke Density prEN 3475-601
Smoke Density BS EN 3475-601 (2007)
Smoke Density BMS 13-69A
Smoke Density BSS 7238:1997
Smoke Density Airbus Industries Test Method (AITM) 2.0008:1993
Smoke Density Airbus Industries Test Method (AITM) 2.0007:1993
Toxicity Airbus Industries Test Method (AITM) 3.0005
Toxicity ABD 0031:1996
Toxicity prEN 3475-602
Toxicity BS EN 3475-602 (2007)
Toxicity BMS 13-69A
Toxicity BSS 7239:1998
Toxicity BS G198:Part 5 (1997) Annex B, C
Toxicity BS 4G 198-3 (1999) Annex B, C
Flammability FAR 25.853:Part 1 Appendix F
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 33 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Flammability Airbus Industries Test Method (AITM) 2.0002:1993
Flammability Airbus Industries Test Method (AITM) 2.0038:1996
Flammability CS 25:2005
FAR 25.853 Appendix F Part 1 Section b Part 5 Horizontal Burn test FAR 25.853
FAR 25.853 Appendix F Part 1 Section b Part 4 Vertical Burn test FAR 25.853
FAR 25.853 Appendix F Part 1 Section b Part 6 Forty five degree test FAR 25.853
FAR 25.853 Appendix F Part 1 Section b Part 7 Sixty degree test FAR 25.853
FAR 25.853 Appendix F Part 2 Seat, FAR 25.853
FAR 25.853 Appendix F Part 3 Cargo FAR 25.853
FAR 25.853 Appendix F Part 4 OSU FAR 25.853
FAR 25.853 Appendix F Part 5 Smoke FAR 25.853
Vertical Flammability aircraft ASTm D 4612
Cables and General plastics materials Oxygen Index BS 2782:Part 1:Method 141:1986
Oxygen Index ASTM D2863-2010
Oxygen Index NES 714:1982
Oxygen Index ISO 4589-2:2005
Oxygen Index BS EN ISO 4589-2:1999
Flammability BS EN 60695-11-10:1999
Flammability IEC 60695-11-10:1999
Marine constructions Smoke NES 711
Smoke Def Stan 02-711:2012
Smoke ISO 5659:Part 2:2012
Smoke BS EN ISO 5659-2:2012
Toxicity NES 713
Toxicity Def Stan 02-713:Apr 2000
Toxicity Def Stan 02-713:issue 2:Apr 2006
Smoke and Toxicity IMO Resolution MSC 61(67):1996:Annex 1,
Smoke and Toxicity IMO: 2010 FTPC Part 2 using FTIR
Heat release IMO: 2010 FTPC Part 10
Flammability IMO A.653(16):1989
Flammability IMO A.687(17):1989
Flammability IMO:2010 FTPC Part 5
Analysis of Combustion Gases using FTIR and IC IMO:2010 FTPC Part 6
SMALL (MARINE) CRAFT Oxygen index at elevated temperature BS EN ISO 9094-2:2002: Section 4.5.2
Combustible materials Specific Optical Density of Smoke ASTM E 662-2009
Specific Optical Density of Smoke ISO 5659-2
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 34 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Plastics Flammability UL 94:2003
Flammability BS 2782:Part 1:Method 140A:1992
Flammability ISO 1210:1992
Flammability BS 2782:Part 1:Method 140C:1993
Flammability ASTM D635
Flammability DIN EN ISO 9773
Flammability PV 3343
Flammability 95/28/EG
Glowing wire test DIN 53459
Flammability of camping tents NON flooring Elements BS 6341 class E or G
Flammability of camping tents NON flooring Elements BS 6341 class F
Flammability of camping tents Flooring Elements BS 6341 class H
Flammability of camping tents As received BS ISO 10966
Flame Resistance Test ASTM D-6413
Flame Resistance Test ASTM F-1506
Flame Resistance Test NFPA 1977
Flame Resistance Test NFPA 2112
Flame Resistance Test CAN/CGSB-4,2 No 27.10.200
Oppervlakte test (deck covering) IMO A 653 (16)
Meubels classificatie norm Pa, Pb en Pc DIN 66084
Assement of ignitability BR 253
Flammability/Ignitability SI 1324 (1988) The Furniture & Furnishings (fire safety) Regulations:
Flammability/Ignitability IMO: 2010 FTPC:Part 8:
Flammability/Ignitability IMO: 2010 FTPC:Part 9:
Flammability/Ignitability State of California Technical Bulletin 117:2013
Flammability/Ignitability van meubelstof voor bioscoop stoelen per kleur NF D60 013 (AM18)
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 35 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Onderzoek Bacteriologisch Norm
Microbiologisch (**)
Schimmel onderzoek DG-18
Schimmel onderzoek MEA
Schimmel onderzoek MEAP/S
Schimmel onderzoek TSA
Bestaande schimmel onderzoek Micorscopisch/kiemgehalte
Bederfelijke goederen onderzoek ASU/ LFGB B 80.00
Sterilization of medical devices. Determination of a population of microorganisms on products Din EN ISO 11737-1
Sterilization of medical devices. Tests of sterility performed in the validation of a sterilization process. Din EN ISO 11737-2
Sterilization; sterile supply; sterilization paper for bags and tube packings; Din 58953-6 Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses Din EN ISO 14729
Antimicrobial preservative efficacy testing and guidance on determining discard date Din EN ISO 14730
Surgical Mask Standard. Minimum Performance Requirements According to the New Facemask Standard EN 14683
Microbiologisch (**)
TPC Total plate count Hygicult
E VRBG agar groei van Enterobacteriaccae Hygicult
E VRBG/β-GUR agar groei van Enterobacteriaccae en β-glucuronidase positive microbs Hygicult
CF VRB agar detection of coliforms Hygicult
Y&F Malt agar dor detection of fungi Yeast and mold Hygicult
Biologisch (**)
Analysing which steps to made in the Biological test. Starting price at ISO 10993-1
Genotoxicity carcinogenicity and reproductive toxicity test ISO 10993-3
Hemocompatibility test (selection of tests for interaction with Blood) ISO 10993-4
Cytotoxicity test NO GLP ISO 10993-5
Cytotoxicity test GLP ISO 10993-5
Test for local effects after implantation ISO 10993-6
Ethylene oxide sterilization residuals ISO 10993-7
Irritation test ISO 10993-10
Sensitivity Magnusson-Kligman-Test (maximization test) ISO 10993-10
Sensitivity Closed Patch test (Buehler) ISO 10993-10
Sensitivity Local Lymph Node Assay test (LLNA) ISO 10993-10
Test for systemic Toxcity ISO 10993-11
Antibacterieel onderzoek (**)
Antibacterial treatments applied to woven, knitted and other flat textiles DIN EN ISO 20645
Antibacterial treatments applied to woven, knitted and other flat textiles ISO 13629-2
Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions ASTM E 2149
Antibacterial Finishes on Textile Materials AATCC 100 Antibacterial activity to bacteria on antibacterial deodorant finished or microbial control finished textile products JIS L 1902
Antibacterieel onderzoek productie en referentie materiaal 2 voud proef gram+ ISO 22196
Antibacterieel onderzoek productie en referentie materiaal 2 voud proef gram+ en gram- ISO 22196
Bestimmung der Aktivität eingearbeiteter antimikrobieller Agenzien in Polymeren oder hydrophoben ASTM E 2180
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 36 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Materialien
Kill time test ASTM E 2315 Chemische desinfectantia en antiseptica - Kwantitatieve suspensieproef voor de bepaling van de standaard bacteride werking van chemische desinfectantie en antiseptica EN 1040 Chemische desinfectantia en antiseptica - Kwantitatieve suspensieproef voor de bepaling van de standaard fungicide of schimmelwerking van chemische desinfectantia en antiseptica EN 1275 Chemische desinfectantia en antiseptica - Kwantitatieve suspensieproef voor de bepaling van de bactericidewerking van chemische desinfectantia en antiseptica gebruikt in voedsel, in industriële, huishoudelijke en institutionele omgeving EN 1276 Chemische desinfectantia en antiseptica - Kwantitatieve suspensietoets voor de bepaling van de fungicide-werking van chemische desinfectantia en antiseptica gebruikt in de voedingsmiddelen-, industriëlele, huishoudelijke en institutionele sector EN 1650 Kwantitatieve suspensietest voor de evaluatie van bactericide-werking tegen legionella pneumophila van chemische desinfectantia voor waterige vloeistofsystemen EN 13623
Determination of antibacterial activity of antibacterial finished products ISO 20743
Determination Of The Resistance Of Textiles To Mildew; Growth Test DIN 53931
Footwear and footwear components -- Test method to assess antibacterial activity ISO 16187
Antifunges onderzoek (**) Schimmels
Environmental Testing Procedures Test J And Guidance: Mould Growth EN IEC DIN 60068-2-10
Beoordeling van het gedrag van micro-organismen ISO 846
Optics and optical instruments - Environmental test methods - Part 11: Mould growth ISO 9022-11
Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials AATCC 30 test III
Determining Resistance of synthetic polymeric Materials to Fungi ASTM G21
Anti Virus onderzoek (**)
Anti virus onderzoek screening EN 14776
Anti virus onderzoek op 1 type EN 14776
Anti virus onderzoek compleet EN 14776
Overige (**)
OK textiel EN 13795-1
Resistance to microbial penetration Dry EN, ISO 22612
Resistance to microbial penetration Wet EN, ISO 22610
Cleanliness microbial EN 11737 vervangt de EN 1174-2
Cleanliness particulate matter EN, ISO 9073-10
Linting EN, ISO 9073-10
Resistance to liquid penetration EN, ISO 22612
Bursting strength Dry EN, ISO 13938-1
Bursting strength wet EN, ISO 13938-1
Tensile strength Dry EN, ISO 29073-3
Tensile strength Wet EN, ISO 29073-3
Primary ignition and penetration by laserbeam EN, ISO 11810-1
Microbiologisch onderzoek op textiel en non wovens (**) EN 14126 EN 14126
Wet penetration onderdeel van DIN EN 14126 ISO 22610
Dry penetration onderdeel van DIN EN 14126 ISO 22612
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 37 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Protection against Bacteriophage onderdeel van DIN EN 14126 ISO 16604
Protection against blood en body fluids onderdeel van DIN EN 14126 ISO 16603
Resistance to Contaminated Aersol ISO 22611
EN 13795 EN 13795
Wet penetration onderdeel van DIN EN 14126 ISO 22610
Dry penetration onderdeel van DIN EN 14126 ISO 22612
Protection against blood en body fluids onderdeel van DIN EN 14126 ISO 16604
Linting wet onderdeel van EN14126, 13795-1, 13795-2 EN 1644
Resistance to water EN 20811
Linting tendency nonwovens EDANA 300.0-84
Non wovens to release fibre fragments EN 9073-10
Protective clothing to penetration by different fluids ISO 16603
Water absorption ISO 9073-6
Determination of runn-off ISO 9073-11
Tests for antimicrobial efficacy JIS Z 2801
Tests for antimicrobial efficacy JIS L 1902
Biologisch afbreekbaarheid (***) Biologisch afbreekbaarheid na 3 maanden EN 13432
Biologisch afbreekbaarheid na 6 maanden EN 13432
Biologisch afbreekbaarheid na 2 maanden NON GLP ISO 11734
Biologisch afbreekbaarheid na 2 maanden GLP ISO 11734
Biologisch afbreekbaarheid na 4 weken (t.b.v. certificering) ASTM D5271
Biologisch afbreekbaarheid na 4 weken (t.b.v. certificering) EN 29408
Biologisch afbreekbaarheid na 4 weken (t.b.v. certificering) ISO 9408
Biologisch afbreekbaarheid na 4 weken (t.b.v. certificering) ISO 14851
Biologisch afbreekbaarheid verlenging van 2 weken (t.b.v. certificering) ASTM D5271
Biologisch afbreekbaarheid verlenging van 2 weken (t.b.v. certificering) EN 29408
Biologisch afbreekbaarheid verlenging van 2 weken (t.b.v. certificering) ISO 9408
Biologisch afbreekbaarheid verlenging van 2 weken (t.b.v. certificering) ISO 14851
Biologisch afbreekbaarheid na 4 weken (t.b.v. screening) ASTM D5271
Biologisch afbreekbaarheid na 4 weken (t.b.v. screening) EN 29408
Biologisch afbreekbaarheid na 4 weken (t.b.v. screening) ISO 9408
Biologisch afbreekbaarheid na 4 weken (t.b.v. screening) ISO 14851
Biologisch afbreekbaarheid verlenging van 2 weken (t.b.v. screening) ASTM D5271
Biologisch afbreekbaarheid verlenging van 2 weken (t.b.v. screening) ISO 9408
Laundry Disinfection Chemothermal laundry disinfection EN 14476
Diverse
Resistance to permeation to cytostatica ISO 6529
Resistance to permeation to cytostatica ASTM F 739-07
Resistance to permeation to alcohol ISO 6529
Resistance to permeation to alcohol ASTM F 739-07
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 38 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Onderzoek medicijn verpakkingen Norm
HDPE/LDPE/PP
MIR USP <661>
Thermal analyse USP <661>
Physicochemical USP <661>
Buffering Capacity USP <661>
Complete USP <661>
Light percent USP <671>
Permeation No Closure USP <671>
Permeation W / seal USP <671>
Permeation W / no seal USP <671>
Permeation for Liquid holding Container USP <671>
Unit dose Methode 1 USP <671>
Unit dose Methode 2 USP <671>
USP <660> type 1 glass Powdered Glass Test USP <660>
Fill Volume Determination USP <660>
Surface Glass Test USP <660>
Light % (if applicable) USP <660>
Arsenic USP <660>
USP <660> type 2 glass Water Attack @ 121°C USP <660>
Fill Volume Determination USP <660>
Surface Glass Test USP <660>
Light % (if applicable) USP <660>
USP <660> type 3 glass Powdered Glass Test USP <660>
Fill Volume Determination USP <660>
Surface Glass Test USP <660>
Light % (if applicable) USP <660>
PET/PETG MIR USP <661>
Thermal analyse USP <661>
Colorant Extract USP <661>
Heavy metals USP <661>
Light percent USP <671>
Total Terephthaloyl Moieties USP <671>
Ethylene Glycol USP <671>
Permeation W / seal USP <671>
Permeation W / no seal USP <671>
Permeation for Liquid holding Container USP <671>
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 39 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Onderzoek Korosie Norm
Corrosion Corrosion Tests in Artificial Atmospheres - Salt Spray Tests ISO 9227: 2012 5.2 NSS test Corrosion Preventive Compound, Underbody Vehicle Corrosion Protection SAE J1959 Paints and Varnishes- Determination of resistance to neutral salt spray (fog) ISO 7253 Water Fog Humidity Test, testing water resistance of coated specimens in saturated water fog conditions GM 4465P
Salt Spray Test GM 4298P Condensing Water Vapor Test, evaluate the effects of a condensing water atmosphere on treated panels Ford FLTM BI 104-02 Salt Spray Resistance Test for Painted Panels and Parts Ford FLTM BI 103-01 Standard Practice for Modified Salt Spray (Fog) Testing ASTM G85 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel ASTM D6675 Standard Guide for Testing Industrial Protective Coatings ASTM D6577 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) ASTM D5894 Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation ASTM D4585 Standard Guide for Testing Coating Powders and Powder Coatings ASTM D3451 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal ASTM D2803 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity ASTM D2247 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus ASTM D1735 Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrustions and Panels ASTM D1654 Standardtestmethoden für den CASS-Test (Copper-Accelerated Acetic Acid-Salt Spray) ASTM B368 Standard Practice for Operating Salt Spray (Fog) Apparatus ASTM B117
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 40 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Onderzoek Leer Norm
Leather Physical-mechanical tests and analysis
Dimensions / general material properties Thickness EN ISO 2589; DIN 53326*
Surface coating thickness EN ISO 17186
Surface coating thickness with picture EN ISO 17186
Apparent density EN ISO 2420; DIN 53327*
(grammage / area mass)
Tensile, extension and flexual properties
Tensile test ( tensile force, breaking elongation) EN ISO 3376; DIN 53328*; ASTM 2209
Stretch and relaxation properties DIN EN ISO 17236
Stretch and relaxation properties DIN 53360
Stretch and relaxation properties ASTM D 2208
Resistance to stretch an set PV 3909 / VW TL 52064 / GME 60305 / GMW 3211
Resistance to grain cracking DIN EN ISO 3378
Tear load (single edge tear) EN ISO 3377-1; DIN 53329-A*
Tear load (double edge tear) EN ISO 3377-2
Stitch tear resistance EN ISO 23910; DIN 53331*; ASTM D 4705-00
Square tensil at tensometer (bulg test), burst pressure DIN 53323
Distension and strength of grain (ball burst test) DIN 53325; ISO 3379
Resistance to flexing (flexometer-test) dry tot 50000 flex EN ISO 5402-1 DIN 53351 EN 32100
Resistance to flexing (flexometer-test) dry tot 100000 flex EN ISO 5402-1 DIN 53351 EN 32100
Resistance to flexing (flexometer-test) dry tot 250000 flex EN ISO 5402-1 DIN 53351 EN 32100
Resistance to flexing (flexometer-test) wet tot 50000 flex EN ISO 5402-1 DIN 53351 EN 32100
Resistance to flexing (flexometer-test) wet tot 100000 flex EN ISO 5402-1 DIN 53351 EN 32100
Resistance to flexing (flexometer-test) wet tot 250000 flex EN ISO 5402-1 DIN 53351 EN 32100
Resistance to flexing dry/wet per 2 extra beoordelingen EN ISO 5402-1 DIN 53351 EN 32100 Flexual stiffness DIN 53350, VDA 230-209
Kleurechtheden Colour fastness to waterspotting ISO 15700
Colour fastness Migration into Platicized PVC ISO 15701
Colour fastness Wasechtheid to machine washing , 40°C 30min ISO 15702
Colour fastness (linitest) Kleurechtheid, 30°C ISO 15703
Colour fastness Dry cleaning Kleurechtheid ISO 11643
Fastness and resistance properties Rub fastness dry 100* Voeringen en inlegzolen EN 13516
Rub fastness dry 100* EN 20344:7.3
Rub fastness dry 100* IUF 450 gelijk aan de ISO 11640
Rub fastness dry 100* EN ISO 11640
Rub fastness wet 100* EN ISO 11640
Rub fastness sweat 50* EN ISO 11640
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 41 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Rub fastness (dry 500*, wet 80* and sweat 50*) EN ISO 11640 volgens duitse product verodering
Rub fastness (dry 500*, wet 250* and sweat 80*) EN ISO 11640 volgens richtlijn EN 13336
Sweat fastness / resistance to transpiration EN ISO 11641; DIN EN ISO 105-E04
Sea water resistance EN ISO 105-E02 Light fastness tests EN ISO 105-B02; DIN 54004* Hot light fastness tests, hot light ageing VDA 75202; DIN 75202*; ISO 105-B06; PV 1303 Suntan lotion resistance PV 3964
Adhesive strength, abrasive wear properties Finish adhesion dry EN ISO 11644 / PV 3354; IUF 470 Finish adhesion wet EN ISO 11644 / PV 3354; IUF 470 Abrasion resistance (crockmeter test) EN ISO 105-X12; ISO 20433 Abrasive wear properties (taber test) EN ISO 17076-2; DIN 53109; ASTM D 3884 Abrasive wear properties (martindale test) EN ISO 12947; VDA 230-211
Slijtweerstand dry 100* EN 12747
Soiling and cleaning behaviour
Soiling and cleaning properties VDA 230-212 Cleaning properties Volkswagen PV 3356; DBL 5399 Oil resistance AATCC 118 Water alcohol-drop test 3M method
Behaviour to water / water vapour permeability
Water resistance, water permeability
EN ISO 5403; EN ISO 20344; DIN 53330*;
EN 344-1*
Water absorption testing
EN ISO 2417 (Kubelka); DIN 53330*;
IUP 7 according to Freundlich
Water vapour permeability EN ISO 14268; DIN 53333*; Herfeld method
Thermal properties, climate test, ageing behaviour, burning behaviour
Ageing and thermal resistance RAL GZ 430 (upholstery leather)
Hydrolysis ageing VDA 230-208
Heat ageing according to customer requirements
Heat resistance TL 52064
Shrinking behaviour
TL 52064; PV 1200; DBL 5310; PTL 5002;
BMW PA-N 123 and others
Shrinking behaviour 3 dagen bij 60°C
Burning behaviour, flammability test DIN 75200 / FMVSS 302; TL 1010; DBL 5307
Physical-mechanical tests and analysis
Full grain (test for corrected grain) QMA 1201
Full grain (test for corrected grain) met foto's QMA 1201
Loose grain effect VDA 230-205
Stick-slip-test (sqeaking behaviour) VDA 230-206
Genuine leather (rating) vanaf BS 2780
Genuine leather (rating) vanaf RAL 060 A2
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 42 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Genuine leather (rating) vanaf EN 15987
Type of leather In house methode
Microscopy, photography light microscopy, SEM, digital camera
Surface profile, topography, roughness optical 3D profilometer, mechanical profilometer
Cold crack Resistance (**) EN ISO 17233 Hydrolyse onderzoek 168 uur/70°C/95%-98%RV incl. aansluitend 15000 knikken In house methode/ EN DIN ISO 31200 Hydrolyse onderzoek 336 uur/70°C/95%-98%RV incl. aansluitend 15000 knikken In house methode/ EN DIN ISO 31200
Buig test (***) 1 Buiging EN ISO 1876-1
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 43 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Onderzoek speelgoed Norm
1.1 Goederen
Release of cadmium en lead LFBG $64 80.03
Ontvlambaarheid BS5852
Ontvlambaarheid DIN EN 1103
Determination of sole adhesion EN ISO 17708
Vluchtige stoffen Polymers with food-contact
Global migration LFBG $64 B80.03
Corosie bestendigheid Din EN 344
Harmlessness acc. To food law LFGB
Speeksel en zweet echtheid (consumer goods) LFBG $64 B82.10
Water onderzoek (acc. To dinking water law) DIN EN ISO 17294-2
Citroen bestendigheid DIN ISO 2722
1.2 Speelgoed toys safety test
Mechaninsche en fysische eigenschappen < 36 maanden EN 71-1
Mechaninsche en fysische eigenschappen > 36 maanden EN 71-1
Extra toeslag voor complex speelgoed EN 71-1
Tear off force (kleine onderdelen) EN 71-1 8.4
sharp edges/points EN 71-1 8.11
Warning and labeling review (nederlands engels) EN 71-1 7
Extra toeslag voor speelgoed met:
Sound DIN EN 71-1 8.28
Heat development DIN EN 71-1 8.30
Electric resistance DIN EN 71-1 8.19
Expanding materials DIN EN 71-1 8.14
glued wooden toys < 36 months DIN EN 71-1 8.9
Mouth actuated toys DIN EN 71-1 8.17
Speed measuring DIN EN 71-1 8.29
On ride toys DIN EN 71-1 8.22
Kinetic energie DIN EN 71-1 8.24
Magnetic flux index
Ontvlambaarheid EN 71-2 + CFR 1610
Metaal migratie Cat. I, II en III EN 71-3
Experimental sets for chemistry and related activities EN 71-4
Chemical toys (sets) other than experimental sets EN 71-5
Finger paints - Requirements and test methods EN 71-7 Swings, slides and similar activity toys for indoor and outdoor family domestic use EN 71-8
Flame retardants (table 2A) EN 71-9
Colourants (table 2B) EN 71-9
Primary aromatic amines (table 2C) EN 71-9
Monomers (table 2D) EN 71-9
Solvents (migration) (table 2E) EN 71-9
Solvents (inhalation) (table 2F) EN 71-9
Wood preservatives (table 2Ga), outdoor EN 71-9
Wood preservatives (table 2Gb), indoor EN 71-9
Preservatives (table 2H) EN 71-9
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 44 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Plasticiser (table 2I) EN 71-9
Formaldehyde (resin bonded wood) EN 717-3 EN 71-9
Formaldehyde (paper) EN 645, EN 1541 EN 71-9
Formaldehyde (textile) EN ISO 14184 EN 71-9
pH value EN ISO 787-9 EN 71 – 9 / 10 / 11
Microbiological safety of toys containing Aquous Media NB-Toys/2012/26
safety of textiles for children Din EN 14682
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 45 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Onderzoek food contact LFGB Norm
Food proof testing
Kunststof
Sensorische test naar LFGB richtlijn DIN 10955
Totaal migratie naar LFGB richtlijn zoet 64 LFGB B80.30
Totaal migratie naar LFGB richtlijn hoog ph 64 LFGB B80.30
Totaal migratie naar LFGB richtlijn laag ph 64 LFGB B80.30
Cadmium test naar LFGB richtlijn EN 1122
Dimethylfumarat test naar LFGB richtlijn In huis methode
Lood test naar LFGB richtlijn EN 1122
Formaldehyde DIN EN ISO 14184-1
Weekmakers
Silekonen
Sensorische test naar LFGB richtlijn DIN 10955
Aandeel vluchtige stoffen naar LFGB richtlijn Kunststof in levensmiddel verkeer BII/XV (BfR)
Dimethylfumarat test naar LFGB richtlijn In huis methode
Glas en Keramiek
Cadmium en Lood test naar LFGB richtlijn 64 LFGB B80.03
Prijs per Keramiek component
Beker met drinkrand test
Hout
Sensorische test naar LFGB richtlijn DIN 10955
Staal/ijzer
Sensorische test naar LFGB richtlijn DIN 10955
Metaal migratie 64 LFGB B80.30
Diverse Kleurstof analyse E102, E104, E110, E120, E124, E129, E132, E152 TPM007 middels HPLC-UV
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 46 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Onderzoek Geotextiel Norm
Geotextiel test overzicht (**) Test for nonwovens. Determination of tensile strength and
elongation EN 29073-3 (DIN53857 oud)
Test for nonwovens. Determination of tensile strength and elongation ISO 13934-1 Test for nonwovens. Determination of tensile strength and elongation DIN 13934-1 Test for nonwovens. Determination of tensile strength and elongation EN 13934-1 Test for nonwovens. Determination of tensile strength and elongation ASTM D 638M
Treksterkte grab EN 13934-2
Doorscheurweerstand trapezium DIN 53859-5
Doorscheurweerstand trapezium ASTM D 4533
Doorscheurweerstand DIN 53859-5
Gewicht bepaling DIN 9864
Gewicht bepaling ISO 9864
Gewicht bepaling EN 9864
Gewicht bepaling ASTM D 5261
Gewicht bepaling EN 14196
Gewicht bepaling DIN 14196
Dikte bepaling ISO 9863-1
Dikte bepaling EN 9863-1
Dikte bepaling DIN 9863-1
Dikte bepaling ASTM D 751
Stempel doordruk test DIN EN ISO 12236
Stempel doordruk test ASTM D 4833
Determination of the characteristic opening size Din EN ISO 12956
Treksterkte grab EN 13934-2
Treksterkte grab EN 13934-2
Treksterkte grab EN 13934-2
Water kolom EN ISO 11058
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 47 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Onderzoek Papier Norm
Papier test overzicht (**)
Dikte Thickness EN 12625-3
Treksterkte Tensile strength and stretch dry EN 12625-4
Tensile strength wet EN 12625-5
Gewicht Baseweight tissue EN12625-6
Baseweight DIN ISO 536
Witheid/helderheid Whiteness / Brightness EN12625-7
Water absorptie Waterabsorption (basket method) EN12625-8
Waterabsorption DIN 54540 deel 4
Absorptie snelheid Absorption speed EDANA 150.4-99
As gehalte Ash content ISO 2144
Diverse DIN EN 920
Vet doorlaatbaarheid DIN 53116
DIN EN 20534
DIN EN 12625-4
DIN EN 12625-5
DIN EN 12625-3
DIN EN 646
DIN EN 648
DIN EN 645
DIN EN 647
Gestealiseerde verpakkingen DIN EN 868-2
DIN EN 868-3
DIN EN 868-4
DIN EN 868-5
DIN EN 868-6
DIN EN 868-7
DIN EN 868-9
DIN EN 868-10
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 48 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Onderzoek Metaal Norm
Metal Physical-mechanical tests and analysis
Treksterkte N=1 ISO 6892-1
Treksterkte N=2 ISO 6892-1
Treksterkte N=5 ISO 6892-1
Treksterkte DIN EN ISO 10002-1
Treksterkte ASTM E8
Kernslagproef DIN EN ISO 10045-1
Kernslagproef EN ISO 148-1
Drukproef DIN 50106
Buigproef DIN EN ISO 5173
Buigproef DIN EN ISO 7438
Buigproef lasnaden DIN EN 910
Hardheidsproef Brinell DIN EN ISO 6506-1
Hardheidsproef Vickers DIN EN ISO 6507-1
Hardheidsproef Rockwell (EN 18265) DIN EN ISO 6508-1
Hardheidsproef Brinell DIN EN ISO 9015-1
Hardheidsproef Brinell DIN ISO 4384-1
Hardheidsproef Brinell DIN ISO 4384-2
Hardheidsproef Brinell DIN ISO 4386-2
Hardheidsproef Brinell DIN ISO 1043-1
Hardheidsproef Rockwell (EN 18265) aangepaste test DIN 50103-3
Drukproef DIN 50106
Single lap shear BS EN 2243-1
Peel (metal to metal) BS EN 2243-2
Peel (metal to honeycomb core) BS EN 2243-3
Micropspische analyse DIN EN ISO 643
DIN EN ISO 945
DIN EN ISO 2639
DIN EN 1321
DIN 50602
SEP 1520
SEP 1572
SEP 1614
ASTM E 112-96
Spectrum analyse Spectrometer analyses (CCD)
Rontgenfluorizens analyse (RFA)
Technische zuiverheid Cleanlines of components ISO 16232-3
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 49 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Corrosie proeven Corrosie zoutnevel DIN EN ISO 9227
Corrosie condenseren DIN EN ISO 6270-1
Korrosie condenseren water klimaat DIN EN ISO 6270-2
Korrosie condenseren water klimaat DIN EN ISO 6998
Korrosie koud klimaat DIN EN 60068-2-1
Korrosie cwarm klimaat DIN EN 60068-2-2
Korrosie met temperatur verloop DIN EN 60068-2-14
Korrosie tempe vocht zykli DIN EN 60068-2-30
Korrosie tempe vocht zykli DIN EN 60068-2-38
Korrosie temp vocht zykli bouwprodukten DIN EN 60068-2-67
Korrosieconstantte temp vocht DIN EN 60068-2-78
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 50 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Onderzoek Kunststoffen Norm
Basis
Gewicht bepaling van kunststof ISO 1183-1:2012 only par. 5.1.4.1
Dichtheid bepaling van kunststof ISO 1183-1
Bepaling van maatverandering DIN 53377
Dikte bepaling folie DIN 53370
Dikte bepaling folie ISO 4593
Trekstektes Treksterkte Plastics ISO 527-1
Treksterkte Molding and extrusion plastics ISO 527-2
Treksterkte Plastic films en sheets, folie ISO 527-3
Treksterkte orthotropic fibre reinforced plastics composites. ISO 527-4
Treksterkte undirectional fibre reinforced plastics composites. ISO 527-5
Treksterkte vulcanized and thermoplastic rubbers ISO 37
Treksterkte Thin Plastic Sheeting (Film) ASTM D 882
Scheursterkte Scheursterkte ISO 505
Door scheurweerstand DIN 53363
Graves/Trouser tear resistance (scheursterkte) ASTM D 1004 & ASTM D 1938/ISO 6383
Hardheid plastics Shore A Hardness Drukkracht 1100gram ISO 7619-1
Shore D Hardness (plastics) Drukkracht 1100gram ISO 7619-1
Shore A Hardness Drukkracht 1274gram ISO 868
Shore D Hardness (plastics) Drukkracht 1274gram ISO 868
Shore A Hardness Drukkracht 1274gram DIN 53505
Shore D Hardness (plastics) Drukkracht 1274gram DIN 53505
Kogeldruk hardheid ISO 2039-1
Rockwell hardheid ISO 2039-2 & ASTM D785
International Rubber Hardness Degree (IRHD) DIN 53519-1 -
Impact strength IZOD impact strength test ISO 180
Charpy impact eigenschappen zonder kerving n=10, 23°C ISO 179-1
Charpy impact eigenschappen zonder kerving n=10, 23°C bij hogere of lagere temperatuur ISO 179-1
Charpy impact eigenschappen met kerving n=10, 23°C ISO 179-1
Charpy impact eigenschappen met kerving n=10, 23°C bij hogere of lagere temperatuur ISO 179-1
Charpy impact eigenschappen met kerving n=10, 23°C Instrumented impact test ISO 179-2
Notch impact Modiefied ISO 179-1 ISO 11542-2 annex B
Free-falling dart (stootbelasting) ISO 7765-1
Free-falling dart (stootbelasting) Non Instrumented impact test ISO 7765-2
Free-falling dart (stootbelasting) ISO 6603-1
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 51 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Free-falling dart (stootbelasting) Non Instrumented impact test ISO 6603-2
Puncture test EN 14477
Notch tenacity (Folie kerftaaiheid)/ protrusion puncture resistance (puntbelastingsweerstand) ASTM D 5748
EN ISO 8256
High Speed Puncture Properties of Plastics Using Load and Displacement Sensors ASTM D 3763
Buigproef 3 punts buigproef ISO 178
3 punts buigproef ASTM D 790
3 punt meting Bending test ISO 14125 methode A
4 punt meting Bending test ISO 14125 methode B
Stijfheid
Bepaling van ringstijfheid 3 metingen DIN 16961-2 en DIN EN ISO 9969
Stifness 23°C ISO 458-1
Stifness -40°C ISO 458-1
Diverse (Re)-blocking resistance ISO 11502
Peel cling aan zelfklevende film ASTM D 5458
Peel-off strength aan gelijmde film (onderkant block-bottomzakken) DIN 5543
Percentage Elastic recovery / Permanent deformation / Stress retention ASTM D 5459
Statische en dynamische wrijvingscoefficient ISO 8295 In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminater ASTM D3518 Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture ASTM D6641
Paints and varnishes -- Cross-cut test ISO 2409
Stress Relaxatie onder compressie ISO 3384 methode A
Stress Relaxatie onder compressie B ISO 3384 methode A
Hot Tack ASTM F 1921
Compressive properties in In-Plane direction ISO 14126 methode 1
In-plane shear ISO 14129
Interlaminar shear ISO 14130
Structural Adhesives Singel lap Shear (Forces from 0.1 kN to 10kN) BS EN 2243-1
Peel (metal to metal Forces from 0.1 kN to 10kN) BS EN 2243-2
Peel (metal to honeycomb core Forces from 0.1 kN to 250kN) BS EN 2243-3
Smeltpunt Smeltpunt index MVR DIN 1133
Smeltpunt index MVFR ISO 1133
Smeltpunt index MVR granulaat ISO 1133
Smeltpunt index MVR component ISO 1133
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 52 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Gehaltes Bepaling van het koolstofgehalte (thermografie) TGA
Bepaling van het koolstofgehalte (microscopie) Microscopie
As gehalte bepaling ISO 3451
Viskositeit bepalingen Viskositeit bepaling ISO 307
Viskositeit bepaling ISO 527-2
Viskositeit ISO 1628-1
Viskositeit ISO 1628-2
Viskositeit HDPE ISO 1628-3
Viskositeit ISO 1628-3
Viskositeit ISO 1628-4
Viskositeit met vulmiddel ISO 1628-5
Viskositeit ISO 1628-5
Thermal properties of Plastics DSC-Differential scanning calorimetry algemene richtlijnen ISO 11357-1
DSC-Analysis: Glass transition temperature ISO 11357-2
DSC-Analysis: Melting point and the enthalpy ISO 11357-3
DSC-Analysis: Determination of specific heat capacity ISO 11357-4
DSC-Analysis: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction an degree of conversion ISO 11357-5
DSC-Analysis: Oxidation Induction Time (OIT) ISO 11357-6
Thermographie ISO 11358
Vicat softening point ISO 306
Heat deflection temperature ISO 75
Coefficient of linear thermal expansion ISO 11359-1
TMA analyse: Coefficient of linear thermal expansion ISO 11359-2
Buislasproef Buislasproef incl trek pr. DVS 2203 DVS Richtlijn 2207 deel 1
Buislasproef incl trek pr. DIN 12814-2 DVS Richtlijn 2207 deel 1
Buislasproef incl trek pr. EN 12814-2 DVS Richtlijn 2207 deel 1
Buislasproef incl buigproef DVS 2203 DVS Richtlijn 2205 deel 1
Buislasproef incl buigproef DIN 12814-1 DVS Richtlijn 2205 deel 1
Buislasproef incl buigproef EN 12814-1 DVS Richtlijn 2205 deel 1
Buislasproef incl buigproef DVS 2203 DVS Richtlijn 2203 deel 1
Buislasproef incl buigproef DIN 12814-1 DVS Richtlijn 2203 deel 1
Buislasproef incl buigproef EN 12814-1 DVS Richtlijn 2203 deel 1
Lasnaden Stevigheidsonderzoek op her lasnaden DVS 2226-3
Stevigheidsonderzoek op de overdrachtnaden DVS 2226-3
Stevigheidsonderzoek 5 paralele en 5 in de extrusion richting DIN EN ISO 527-3
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 53 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Stevigheidsonderzoek op lasnaden DIN EN ISO 527-3
Stevigheidsonderzoek op lasnaden DVS 2226-2
Hechtkracht, lassterkte, lascurve ASTM F 88 -
Creep Determination of creep ratio (kruip ratio) 1000 uur ISO 9967
Determination of creep ratio (kruip ratio) 1000 uur EN 9967
Determination of creep ratio (kruip ratio) 1000 uur DIN 9967
Determination of creep ratio (kruip ratio) 2000 uur ISO 9967
Determination of creep ratio (kruip ratio) 2000 uur EN 9967
Determination of creep ratio (kruip ratio) 2000 uur DIN 9967
Creep resistance ISO 899-1
Schuim, Foam proeven Dichtheid, Density, plastic, rubber ISO 2781
Dichtheid, Density Foam ISO 845
Dichtheid, Density DIN 53420
Treksterkte en rek bij breuk, tensile strength and elongation at break ISO 1798
Treksterkte en rek bij breuk, tensile strength and elongation at break DIN 53571
Blijvende vorm verandering, Compression set ISO 1856
Indrukkingshardheid, Indentation hardness ISO 2439
Indrukkingshardheid, Indentation hardness DIN 53576
Dynamische vermoeiing, Dauerschwingversuch ISO 3385
Dynamische vermoeiing, Dauerschwingversuch DIN 53574
Stramheid, compression hardness ISO 3386
Stramheid, compression hardness DIN 53577
Brandbaarheid, Flammability ISO 3795
Kogelelasticiteit, Ball rebound ASTM D 1564
Alle publicatie zijn onder voorbehoud en kunnen geen rechten aan worden ontleend.
Page: 54 / 54
Mater ia l •••• Test •••• Research •••• Serv ices
MTRSLAB, Generatorstraat 26, 7556RC Hengelo (ov), The Netherlands, Tel: +31(0)74-2491000, email: [email protected] Chamber of commerce: 08098059, VAT no.: 8100.03.983.B.01, Bank account; BIC/SWIFT: SNSBNL2A, IBAN: NL62SNSB0907446167
MTRSLAB, is a tradename of Nedlabs BV
Top Related