Register and win!
www.kaercher.com
NT 45/1 TactNT 45/1 Tact Te
59624460 10/09
Deutsch 6English 12Français 18Italiano 24Nederlands 30Español 36Português 42Dansk 48Norsk 54Svenska 60Suomi 66Ελληνικά 72Türkçe 79Русский 85Magyar 92Čeština 98Slovenščina 104Polski 110Româneşte 116Slovenčina 122Hrvatski 128Srpski 134Български 140Eesti 147Latviešu 153Lietuviškai 159Українська 165
24
23
18
19
20
21
22
28
27
27
26
25
1
2
315 16
4
5
6
78910111213
14
17
29
3
2x
“Click”
5
6
7
4
A
B
1.
2.
C
45
25
26
32
35
21,
5
26,9
31
D
E
F
G
5
- 1
Please read and comply with these original instructions prior
to the initial operation of your appliance and store them for later use or subsequent own-ers.– Before first start-up it is definitely nec-
essary to read the safety indications Nr. 5.956-249!
– The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dan-gers for the operator and other persons.
– In case of transport damage inform ven-dor immediately
Notes about the ingredients (REACH)You will find current information about the ingredients at: http://www.karcher.de/de/unternehmen/umweltschutz/REACH.htm
� DangerImmediate danger that can cause severe injury or even death.� WarningPossible hazardous situation that could lead to severe injury or even death.CautionPossible hazardous situation that could lead to mild injury to persons or damage to property.
� WarningThe appliance is not suitable for vacuuming dust which endangers health.– The machine is meant for dry and wet
cleaning of floors and walls. – This appliance is suited for the commer-
cial use, e.g. in hotels, schools, hospi-tals, factories, shops, offices, and rental companies.
1 Electrodes2 Suction hose3 Cable hook4 Air outlet, working air5 Suction head lock
Contents
Environmental protection EN - 1Symbols in the operating in-structions
EN - 1
Proper use EN - 1Device elements EN - 1Start up EN - 2Operation EN - 3Transport EN - 3Storage EN - 4Maintenance and care EN - 4Troubleshooting EN - 4Warranty EN - 4Accessories and Spare Parts EN - 5CE declaration EN - 5Technical specifications EN - 6
Environmental protection
The packaging material can be recycled. Please do not throw the packaging material into household waste; please send it for recycling.
Old appliances contain valua-ble materials that can be recy-cled; these should be sent for recycling. Batteries, oil, and similar substances must not enter the environment. Please dispose of your old appliances using appropriate collection systems.
Symbols in the operating in-structions
Proper use
Device elements
12 EN
- 2
6 Impeller7 Air inlet, motor cooling air8 Dirt receptacle9 Steering roller bow10 Suction head11 Steering roller12 Suction support13 Floor nozzle14 Suction pipe15 Carrying handle16 Filter cover17 Bender18 Rotary switch for suction output (min-
max)19 Indicator lamp20 Socket21 Automatic filter dedusting22 Main switch23 Flat fold filter24 Filter dedusting25 Floor nozzle holder26 Holder for floor nozzle27 Holder for suction pipes28 Power cord29 Nameplate
Tact Te only:Static charge is deflected by providing earthing to the connection nozzles. This prevents the formation of sparks and cur-rent shocks due to attachments (option) with electrical conductivity.
CautionThe flat pleated filter must must always be in place while vacuuming.– When vacuuming fine dust, you may
also use an additional paper filter bag or a membrane filter (special accessory).
Illustration Release and remove the suction head.
Insert the paper filter bag or the mem-brane filter (special attachment).
Insert and lock the suction head.
Illustration Remove the brush strips. Install the rubber lips.Note: The structured side of the rubber lips must point outwards.
– If the appliance is used to vacuum wet dirt the paper filter bag or the mem-brane filter (special accessory) must al-ways be removed.
– It is recommended to use a special filter bag (wet) (see Filter systems).
CautionThe flat pleated filter must must always be in place while vacuuming.– If wet dirt is vacuumed with the uphol-
stery or crevice nozzle, or if water is sucked up from a container, it is recom-mended to deactivate the "automatic fil-ter cleaning" function.
– If the maximum liquid level is reached the appliance will turn off automatically.
– In case of non-conductive liquids (such as emulsion drilling fluids, oils, and greases) the appliance is not turned off when the container is full. The filling level must be continu-ously monitored and the container must be emptied in time.
– After having completed the wet vacuum operation clean the flat pleated filter, the electrodes and the container and let dry.
Illustration The suction hose is equipped with a clip system. All C-35/C-DN-35 accessories can be connected.
Start up
Anti-static system
Dry vacuum cleaning
Inserting the paper filter bag
Wet vacuum cleaning
Inserting the rubber lips
Remove the paper filter bag
General
Clip connection
13EN
- 3
Plug in the main plug. Switch on the appliance at the main
switch.
Tact Te only: Set the suction output (min - max) at the
rotary switch.
� DangerRisk of injury and damage! The socket out-let is only for the connection of power tools to the vacuum cleaner. Any other use of the socket outlet is not permitted.Tact Te only: Connect the mains plug of the electric
power tool to the vacuum cleaner. Switch on the appliance at the main
switch.Indicator lamp is on; vacuum cleaner is in the standby mode.Note: The vacuum cleaner is turned on and off automatically with the electric power tool.Note: The vacuum cleaner starts automat-ically within 0.5 seconds and continues to run for 15 seconds after the power tool has being switched off.Note: Please refer to "Technical specifica-tions" for the power connection specifica-tions of the power tools.Illustration Adjust the stepped power tool adaptor
to fit the connection of the electric pow-er tool.
Illustration Remove the elbow from the suction
hose. Attach the stepped power tool adaptor
to the suction hose.Illustration Connect the adaptor to the electric pow-
er tool.
The appliance has an innovative filter cleaning system that is particularly effective with fine dust. The flat pleated filter is auto-matically cleaned every 15 seconds through an air jet (pulsating sound). Note: Automatic filter dedusting is switched on at the factory. Note: The automatic filter dedusting func-tion can only be switched on/ off when the appliance is switched on.– To switch off automatic filter cleaning: Activate the switch. Indicator lamp in
the switch goes off.– To switch on automatic filter cleaning: Press the switch again. Indicator lamp
in the switch glows green.
Switch off the appliance at the main switch.
Pull out the mains plug.
Empty the container. Vacuum and wipe the appliance inside
and outside.
Illustration Store the suction hose and the mains
cable as shown in the illustration. Place the appliance in a dry room and
secure it from unauthorized use.
CautionRisk of injury and damage! Observe the weight of the appliance when you transport it. Remove the suction pipe with the floor
nozzle from the holder. Hold the appli-ance at the handle and at the suction pipe to transport it.
When transporting in vehicles, secure the appliance according to the guide-lines from slipping and tipping over.
Operation
Turning on the Appliance
Adjust the suction output
Working with electrical power tools
Automatic filter cleaning
Turn off the appliance.
After each operation
Storing the Appliance
Transport
14 EN
- 4
CautionRisk of injury and damage! Note the weight of the appliance in case of storage.This appliance must only be stored in inte-rior rooms.
� DangerFirst pull out the plug from the mains before carrying out any tasks on the machine.
Open filter door. Replace the flat pleated filter. Close the filter door, it must lock into
place.
Release and remove the suction head. Clean the electrodes. Insert and lock the suction head.
� DangerFirst pull out the plug from the mains before carrying out any tasks on the machine.
Check cables, plugs, fuse, socket and electrodes.
Turn on the appliance.
Empty the container.
Turn off the appliance and wait for 5 seconds, turn it on again after 5 sec-onds.
Clean the electrodes as well as the space between the electrodes.
Remove blockages in the suction noz-zle, suction tube, suction hose, or flat pleated filter.
Exchange the paper filter bag. Ensure the filter cover properly locks
into place. Clean or replace the membrane filter
(special accessory). Replace the flat pleated filter.
Check for proper installation of the flat pleated filter.
Replace the flat pleated filter.
Clean the electrodes as well as the space between the electrodes.
Continuously check the filling level in case of non-conductive liquid.
Suction hose is not connected.
Inform Customer Service
Inform Customer Service
The warranty terms published by the rele-vant sales company are applicable in each country. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in man-ufacturing. In the event of a warranty claim please contact your dealer or the nearest authorized Customer Service centre. Please submit the proof of purchase.
Storage
Maintenance and care
Exchanging the flat pleated filter
Cleaning the electrodes
Troubleshooting
Suction turbine does not run
Suction turbine turns off
Suction turbine does not start again after the container has been emp-
tied
Suction capacity decreases
Dust comes out while vacuuming
Automatic shut-off (wet vacuum cleaning) does not react
Automatic filter cleaning is not working
Automatic filter cleaning cannot be switched off
Automatic filter cleaning cannot be switched on
Warranty
15EN
- 5
– Only use accessories and spare parts which have been approved by the man-ufacturer. The exclusive use of original accessories and original spare parts ensures that the appliance can be oper-ated safely and troublefree.
– At the end of the operating instructions you will find a selected list of spare parts that are often required.
– For additional information about spare parts, please go to the Service section at www.kaercher.com.
We hereby declare that the machine de-scribed below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval.
5.957-602
The undersigned act on behalf and under the power of attorney of the company man-agement.
Alfred Kärcher GmbH Co. KGAlfred-Kärcher-Str. 28 - 4071364 Winnenden (Germany)Phone: +49 7195 14-0Fax: +49 7195 14-2212
Accessories and Spare Parts
CE declaration
Product: Wet and dry vacuum cleanerType: 1.145-xxx
Relevant EU Directives2006/42/EC (+2009/127/EC)2004/108/ECApplied harmonized standardsEN 55014–1: 2006EN 55014–2: 1997 + A1: 2001EN 60335–1EN 60335–2–69EN 61000–3–2: 2006EN 61000–3–3: 2008EN 62233: 2008Applied national standards-
CEO Head of Approbation
16 EN
- 6
Technical specifications
Tact Tact TeMains voltage V 220-240 220-240Frequency Hz 50/60 50/60Max. performance W 1380 1380Rated power W 1200 1200Container capacity l 43 43Filling quantity (liquid) l 30 30Air volume (max.) l/s 61 61Negative pressure (max.) kPa
(mbar)23,0 (230) 23,0 (230)
Power connection data of the power tools W -- EUR: 100-2200W -- CH: 100-1100
Protective class -- II ISuction hose connection (C-DN/C-ID) mm 35 35Length x width x height mm 520 x 380 x 695 520 x 380 x 695Weight kg 12,5 13,5Max. ambient temperature °C +40 +40Values determined to EN 60335-2-69Sound pressure level LpA dB(A) 67 67Uncertainty KpA dB(A) 1 1
Power cord H05VV-F 2x1,0 mm2Tact Part no.: Cable lengthEUR 6.647-263.0 7,5 mGB 6.647-264.0 7,5 mCH 6.647-265.0 7,5 mAUS 6.647-266.0 7,5 m
Power cord H07RN-F 3x1,5 mm2Tact Te Part no.: Cable lengthEUR 6.649-385.0 7,5 mGB 6.649-399.0 7,5 mCH 6.649-393.0 7,5 m
17EN
* BIA C geprüft, Rückhaltevermögen > 99,9 %* BIA C approved, Retention > 99,9 %* Contrôle BIA C, Conservation > 99,9 %
Filtersysteme / Filter Systems / Système de filtres
Flachfaltenfil-ter *Flat pleatedfilter *Filtre plat àplis *
Papierfiltertü-te 2-lagig *Paper filter bag double layered *Sachetfiltre à 2épaisseurs *
MembranfilterDiaphragmfilterFiltre àmembrane
Spezialfiltertü-te, nassSpecial filter bag, wetSachet filtre spécial,mouillé
Flachfaltenfil-ter (PES) *Flat pleatedfilter (PES) *Filtre plat à plis (PES) *
Bestell-Nr.Order No.Numéro deréférence
6.904-367 6.904-208 6.904-212 6.904-211 6.904-356
MengeQuantityQuantité
1 5 1 5 1
NormalstäubeNormal dustPoussièresnormales
X X X
FeinstäubeFine dustPoussières fines
X X
Abrasive StäubeAbrasive dustPoussièresabrasives
X X X X
Flüssigkeiten,nasser SchmutzLiquids, wet dirtLiquides, saletèshumides
X X
172
Zubehör / Accessories / Accessoires
4.440-6264.440-653
CDN 35CDN 35 EL
2,52,5
6.906-2086.906-2416.906-2426.906-3216.906-2796.906-5466.906-714
C 35C 35C 35C 40C 40
C 40 ELC 40 Oil
2,54,0
10,04,0
10,04,04,0
6.906-2376.906-2776.906-344
C 35C 35 EL
C 40Verlängerung,
extension,rallonge
2.639-483 DN 35 0,45
2.639-4842.639-485
DN 35/27DN 35/27 EL
3,53,5
5.453-0425.453-0525.407-1125.407-1115.407-113
C 35 ELC 35 EL
C 35 - DN 35C 40 - DN 40C 40 - C 35
5.031-7185.031-9395.031-9045.032-427
DN 35DN 35 ELC/DN 40
C/DN 40 EL6.900-5146.900-275
DN 35 MDN 40 M
0,50,5
6.906-5136.906-3846.906-5546.903-0186.906-383
DN 35DN 35 M
DN 40DN 40 MDN 40 M
360370360370450
173
EL = elektrisch leitend, electrical conductive, conducteur électriqueC = Clip-Verbindung, Clip connection,Connexion de clipDN = Konus-Verbindung, Cone connection, Connexion de côneM = Metall, metal, métalOil = ölbeständig, oil resistant, résistant à l’huile
6.906-511 DN 35 270
6.900-9226.903-033
DN 35 MDN 40
0,50,29
6.902-1046.902-105
DN 35DN 40
0,20,2
6.903-862 DN 35
6.900-4256.903-863
DN 35 hardDN 35 soft
0,250,25
174
NT 45/1 Tact
175
NT 45/1 Tact Te
176
Top Related