7/27/2019 Mech Vi Sdat
1/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-500-2K11ANIL KUMAR
11-YMCAU-500YASH PAL
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130685
ANIL KUMAR
Reappear (MU-306, MU-308)
0
0
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 0
cgpa : 0
crediT : 32 crediT : 32
sgpa : 0 sgpa : 0
cgpa : 0 cgpa : 0
1 Computer Aided Design MU-302 C4
2 Numerical Control of Machine Tools and Robotics MU-304 D*4
3 Heat and Mass Transfer MU-306 E4
4 Machine Design - II MU-308 E4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
C
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
C
B
A+
1
1
1
4 A
32
0
11 Air-Conditioning Equipments MU-324 4 C
7/27/2019 Mech Vi Sdat
2/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
3/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-501-2K11ANJU RANI
11-YMCAU-501KASHMIRI LAL
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130686
ANJU RANI
-
0
0
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 5.875
cgpa : 5.875
crediT : 32 crediT : 32
sgpa : 6.094 sgpa : 0
cgpa : 5.984 cgpa : 0
1 Computer Aided Design MU-302 C4
2 Numerical Control of Machine Tools and Robotics MU-304 C4
3 Heat and Mass Transfer MU-306 D*4
4 Machine Design - II MU-308 C4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
B
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
C
B
B
1
1
1
4 A
32
6.562
11 Air-Conditioning Equipments MU-324 4 C
7/27/2019 Mech Vi Sdat
4/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
5/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-502-2K11ARUN SAINI
11-YMCAU-502RAJENDER SAINI
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130687
ARUN SAINI
PASS
128
7.734
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 6.688
cgpa : 6.688
crediT : 32 crediT : 32
sgpa : 7.844 sgpa : 8.156
cgpa : 7.266 cgpa : 7.562
1 Computer Aided Design MU-302 B4
2 Numerical Control of Machine Tools and Robotics MU-304 B4
3 Heat and Mass Transfer MU-306 C4
4 Machine Design - II MU-308 B4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
A
A
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
B
C
A
1
1
1
4 A+
32
8.25
11 Air-Conditioning Equipments MU-324 4 A
7/27/2019 Mech Vi Sdat
6/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
7/150
7/27/2019 Mech Vi Sdat
8/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
9/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-505-2K11DEEPAK
11-YMCAU-504VED SINGH
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130689
DEEPAK
Reappear (MU-306, MU-308)
0
0
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 0
cgpa : 0
crediT : 32 crediT : 32
sgpa : 0 sgpa : 0
cgpa : 0 cgpa : 0
1 Computer Aided Design MU-302 C4
2 Numerical Control of Machine Tools and Robotics MU-304 C4
3 Heat and Mass Transfer MU-306 E4
4 Machine Design - II MU-308 E4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
D
C
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
B
C
B
1
1
1
4 A
32
0
11 Air-Conditioning Equipments MU-324 4 C
7/27/2019 Mech Vi Sdat
10/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
11/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-506-2K11DEEPAK DUHAN
11-YMCAU-505RAJENDER KUMAR
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130690
DEEPAK DUHAN
PASS
128
8.828
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 8.594
cgpa : 8.594
crediT : 32 crediT : 32
sgpa : 8.594 sgpa : 9.25
cgpa : 8.594 cgpa : 8.812
1 Computer Aided Design MU-302 A+4
2 Numerical Control of Machine Tools and Robotics MU-304 A4
3 Heat and Mass Transfer MU-306 B4
4 Machine Design - II MU-308 A4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
A+
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
A
A
B
1
1
1
4 A
32
8.875
11 Air-Conditioning Equipments MU-324 4 A
7/27/2019 Mech Vi Sdat
12/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
13/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-507-2K11DEEPAK KUMAR
11-YMCAU-524BAJINDER LAL
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130691
DEEPAK KUMAR
PASS
128
6.734
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 6.094
cgpa : 6.094
crediT : 32 crediT : 32
sgpa : 6 sgpa : 7.719
cgpa : 6.047 cgpa : 6.604
1 Computer Aided Design MU-302 B4
2 Numerical Control of Machine Tools and Robotics MU-304 A4
3 Heat and Mass Transfer MU-306 D4
4 Machine Design - II MU-308 D4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
B
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
A
C
A
1
1
1
4 B
32
7.125
11 Air-Conditioning Equipments MU-324 4 B
7/27/2019 Mech Vi Sdat
14/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
15/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-508-2K11GURMEET
11-YMCAU-506BALWANT SINGH
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130692
GURMEET
PASS
128
6.844
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 6.688
cgpa : 6.688
crediT : 32 crediT : 32
sgpa : 6.875 sgpa : 7.031
cgpa : 6.781 cgpa : 6.865
1 Computer Aided Design MU-302 C4
2 Numerical Control of Machine Tools and Robotics MU-304 C4
3 Heat and Mass Transfer MU-306 C4
4 Machine Design - II MU-308 D4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
A
B
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
B
D
A
1
1
1
4 B
32
6.781
11 Air-Conditioning Equipments MU-324 4 B
7/27/2019 Mech Vi Sdat
16/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
17/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-509-2K11KESHAV VERMA
11-YMCAU-507BUTA SINGH
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130693
KESHAV VERMA
PASS
128
6.953
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 5.406
cgpa : 5.406
crediT : 32 crediT : 32
sgpa : 6.938 sgpa : 7.812
cgpa : 6.172 cgpa : 6.719
1 Computer Aided Design MU-302 A4
2 Numerical Control of Machine Tools and Robotics MU-304 C4
3 Heat and Mass Transfer MU-306 C4
4 Machine Design - II MU-308 C4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
B
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
A
B
B
1
1
1
4 A
32
7.656
11 Air-Conditioning Equipments MU-324 4 A
7/27/2019 Mech Vi Sdat
18/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
19/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-510-2K11MONU
11-YMCAU-508MUNNI RAM
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130694
MONU
Reappear (MU-306)
0
0
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 0
cgpa : 0
crediT : 32 crediT : 32
sgpa : 5.781 sgpa : 6.938
cgpa : 0 cgpa : 0
1 Computer Aided Design MU-302 A4
2 Numerical Control of Machine Tools and Robotics MU-304 C4
3 Heat and Mass Transfer MU-306 E4
4 Machine Design - II MU-308 C4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
B
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
A
A
B
1
1
1
4 A
32
0
11 Air-Conditioning Equipments MU-324 4 B
7/27/2019 Mech Vi Sdat
20/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
21/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-511-2K11NAVNEET MUWAL
11-YMCAU-509BALBIR SINGH
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130695
NAVNEET MUWAL
PASS
128
6.758
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 6.438
cgpa : 6.438
crediT : 32 crediT : 32
sgpa : 5.969 sgpa : 7.75
cgpa : 6.203 cgpa : 6.719
1 Computer Aided Design MU-302 B4
2 Numerical Control of Machine Tools and Robotics MU-304 C4
3 Heat and Mass Transfer MU-306 D4
4 Machine Design - II MU-308 D4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
C
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
A
B
A
1
1
1
4 B
32
6.875
11 Air-Conditioning Equipments MU-324 4 A
7/27/2019 Mech Vi Sdat
22/150
7/27/2019 Mech Vi Sdat
23/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-512-2K11NEELAM
11-YMCAU-523PREM SINGH
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130696
NEELAM
PASS
128
7.328
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 6.906
cgpa : 6.906
crediT : 32 crediT : 32
sgpa : 7.344 sgpa : 7.844
cgpa : 7.125 cgpa : 7.365
1 Computer Aided Design MU-302 B4
2 Numerical Control of Machine Tools and Robotics MU-304 B4
3 Heat and Mass Transfer MU-306 D4
4 Machine Design - II MU-308 D4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
A
A
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
A+
C
C
1
1
1
4 A
32
7.219
11 Air-Conditioning Equipments MU-324 4 B
7/27/2019 Mech Vi Sdat
24/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
25/150
7/27/2019 Mech Vi Sdat
26/150
7/27/2019 Mech Vi Sdat
27/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-514-2K11RAKESH SHARMA
11-YMCAU-511BALWAN SINGH
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130698
RAKESH SHARMA
Reappear (MU-306)
0
0
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 0
cgpa : 0
crediT : 32 crediT : 32
sgpa : 0 sgpa : 0
cgpa : 0 cgpa : 0
1 Computer Aided Design MU-302 C4
2 Numerical Control of Machine Tools and Robotics MU-304 C4
3 Heat and Mass Transfer MU-306 E4
4 Machine Design - II MU-308 D*4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
B
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
B
C
C
1
1
1
4 A
32
0
11 Air-Conditioning Equipments MU-324 4 C
7/27/2019 Mech Vi Sdat
28/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
29/150
7/27/2019 Mech Vi Sdat
30/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
31/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-516-2K11SANDEEP KAUR
11-YMCAU-513RAMESH SINGH
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130700
SANDEEP KAUR
PASS
128
6.672
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 6.312
cgpa : 6.312
crediT : 32 crediT : 32
sgpa : 6.312 sgpa : 7.406
cgpa : 6.312 cgpa : 6.677
1 Computer Aided Design MU-302 C4
2 Numerical Control of Machine Tools and Robotics MU-304 C4
3 Heat and Mass Transfer MU-306 D4
4 Machine Design - II MU-308 C4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
B
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
A
B
B
1
1
1
4 A
32
6.656
11 Air-Conditioning Equipments MU-324 4 C
7/27/2019 Mech Vi Sdat
32/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
33/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-517-2K11SHANKI
11-YMCAU-514SURENDER KUMAR
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130701
SHANKI
Reappear (MU-306)
0
0
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 6.125
cgpa : 6.125
crediT : 32 crediT : 32
sgpa : 5.625 sgpa : 7.281
cgpa : 5.875 cgpa : 6.344
1 Computer Aided Design MU-302 C4
2 Numerical Control of Machine Tools and Robotics MU-304 C4
3 Heat and Mass Transfer MU-306 E4
4 Machine Design - II MU-308 D4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
B
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
B
B
C
1
1
1
4 A
32
0
11 Air-Conditioning Equipments MU-324 4 C
7/27/2019 Mech Vi Sdat
34/150
7/27/2019 Mech Vi Sdat
35/150
7/27/2019 Mech Vi Sdat
36/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
37/150
7/27/2019 Mech Vi Sdat
38/150
7/27/2019 Mech Vi Sdat
39/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-520-2K11SUNITA
11-YMCAU-517RAJ SINGH
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130704
SUNITA
Reappear (MU-306)
0
0
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 5.438
cgpa : 5.438
crediT : 32 crediT : 32
sgpa : 6.188 sgpa : 6.844
cgpa : 5.812 cgpa : 6.156
1 Computer Aided Design MU-302 C4
2 Numerical Control of Machine Tools and Robotics MU-304 C4
3 Heat and Mass Transfer MU-306 E4
4 Machine Design - II MU-308 D4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
B
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
A
C
C
1
1
1
4 A
32
0
11 Air-Conditioning Equipments MU-324 4 C
7/27/2019 Mech Vi Sdat
40/150
7/27/2019 Mech Vi Sdat
41/150
7/27/2019 Mech Vi Sdat
42/150
7/27/2019 Mech Vi Sdat
43/150
7/27/2019 Mech Vi Sdat
44/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
45/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
LM-523-2K11VINIT KUMAR
11-YMCAU-520JAI PARKASH
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130707
VINIT KUMAR
Reappear (MU-306, MU-308)
0
0
credit : 34
sgpa : N/A
cgpa : N/A
credit : 29
sgpa : N/A
cgpa : N/A
crediT : 32
sgpa : 5.5
cgpa : 5.5
crediT : 32 crediT : 32
sgpa : 0 sgpa : 6.906
cgpa : 0 cgpa : 0
1 Computer Aided Design MU-302 C4
2 Numerical Control of Machine Tools and Robotics MU-304 C4
3 Heat and Mass Transfer MU-306 E4
4 Machine Design - II MU-308 E4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
C
B
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
B
C
C
1
1
1
4 B
32
0
11 Air-Conditioning Equipments MU-324 4 C
7/27/2019 Mech Vi Sdat
46/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
47/150
7/27/2019 Mech Vi Sdat
48/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
49/150
7/27/2019 Mech Vi Sdat
50/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
51/150
7/27/2019 Mech Vi Sdat
52/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
53/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
M-362-2K10AASHISH ROHILA
10-YMCAU-002RAJ KUMAR
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130711
AASHISH ROHILA
-
0
0
credit : 34
sgpa : 0
cgpa : 0
credit : 29
sgpa : 5.448
cgpa : 0
crediT : 32
sgpa : 6.25
cgpa : 0
crediT : 32 crediT : 32
sgpa : 5.594 sgpa : 7.719
cgpa : 0 cgpa : 0
1 Computer Aided Design MU-302 B4
2 Numerical Control of Machine Tools and Robotics MU-304 B4
3 Heat and Mass Transfer MU-306 D4
4 Machine Design - II MU-308 D4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
A
C
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
B
A
C
1
1
1
4 A+
32
7.281
11 Air-Conditioning Equipments MU-324 4 B
7/27/2019 Mech Vi Sdat
54/150
7/27/2019 Mech Vi Sdat
55/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
M-363-2K10ABHIMANYU MALIK
10-YMCAU-003RANBIR SINGH MALIK
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130712
ABHIMANYU MALIK
PASS
191
8.529
credit : 34
sgpa : 8.765
cgpa : 8.765
credit : 29
sgpa : 8.793
cgpa : 8.778
crediT : 32
sgpa : 8.531
cgpa : 8.695
crediT : 32 crediT : 32
sgpa : 8.312 sgpa : 8.438
cgpa : 8.598 cgpa : 8.566
1 Computer Aided Design MU-302 A4
2 Numerical Control of Machine Tools and Robotics MU-304 A4
3 Heat and Mass Transfer MU-306 B4
4 Machine Design - II MU-308 C4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
A
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
B
B
A+
1
1
1
4 A
32
8.344
11 Air-Conditioning Equipments MU-324 4 A
7/27/2019 Mech Vi Sdat
56/150
7/27/2019 Mech Vi Sdat
57/150
7/27/2019 Mech Vi Sdat
58/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
59/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
M-365-2K10ASHISH KUMAR
10-YMCAU-005SHRI KRISHAN
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130714
ASHISH KUMAR
PASS
191
7.241
credit : 34
sgpa : 6
cgpa : 6
credit : 29
sgpa : 6.276
cgpa : 6.127
crediT : 32
sgpa : 6.812
cgpa : 6.358
crediT : 32 crediT : 32
sgpa : 7.531 sgpa : 8.344
cgpa : 6.654 cgpa : 6.994
1 Computer Aided Design MU-302 B4
2 Numerical Control of Machine Tools and Robotics MU-304 B4
3 Heat and Mass Transfer MU-306 B4
4 Machine Design - II MU-308 B4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
A
A+
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
B
B
A
1
1
1
4 A
32
8.469
11 Air-Conditioning Equipments MU-324 4 A
7/27/2019 Mech Vi Sdat
60/150
7/27/2019 Mech Vi Sdat
61/150
7/27/2019 Mech Vi Sdat
62/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
63/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
M-367-2K10AJAY KUMAR
10-YMCAU-007ROHTASH SINGH
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130716
AJAY KUMAR
Reappear (MU-308)
0
0
credit : 34
sgpa : 4.824
cgpa : 4.824
credit : 29
sgpa : 5.379
cgpa : 5.079
crediT : 32
sgpa : 5.375
cgpa : 5.179
crediT : 32 crediT : 32
sgpa : 5.938 sgpa : 0
cgpa : 5.37 cgpa : 0
1 Computer Aided Design MU-302 C4
2 Numerical Control of Machine Tools and Robotics MU-304 D*4
3 Heat and Mass Transfer MU-306 D4
4 Machine Design - II MU-308 E4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
C
C
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
B
B
C
1
1
1
4 B
32
0
11 Air-Conditioning Equipments MU-324 4 C
7/27/2019 Mech Vi Sdat
64/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
65/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
M-368-2K10AMIT
10-YMCAU-008RAJPAL SINGH
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130717
AMIT
-
0
0
credit : 34
sgpa : 5.941
cgpa : 5.941
credit : 29
sgpa : 5.897
cgpa : 5.921
crediT : 32
sgpa : 6.062
cgpa : 5.968
crediT : 32 crediT : 32
sgpa : 6.438 sgpa : 0
cgpa : 6.087 cgpa : 0
1 Computer Aided Design MU-302 C4
2 Numerical Control of Machine Tools and Robotics MU-304 C4
3 Heat and Mass Transfer MU-306 C4
4 Machine Design - II MU-308 C4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
A
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
C
A
B
1
1
1
4 A
32
7.125
11 Air-Conditioning Equipments MU-324 4 B
7/27/2019 Mech Vi Sdat
66/150
7/27/2019 Mech Vi Sdat
67/150
7/27/2019 Mech Vi Sdat
68/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
69/150
7/27/2019 Mech Vi Sdat
70/150
7/27/2019 Mech Vi Sdat
71/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
M-371-2K10ANISH MAHESHWARI
10-YMCAU-011SANJAY MAHESHWARI
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130720
ANISH MAHESHWARI
PASS
191
7.801
credit : 34
sgpa : 7.971
cgpa : 7.971
credit : 29
sgpa : 8.379
cgpa : 8.159
crediT : 32
sgpa : 7.656
cgpa : 7.989
crediT : 32 crediT : 32
sgpa : 7.594 sgpa : 7.781
cgpa : 7.89 cgpa : 7.868
1 Computer Aided Design MU-302 C4
2 Numerical Control of Machine Tools and Robotics MU-304 B4
3 Heat and Mass Transfer MU-306 C4
4 Machine Design - II MU-308 C4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
A+
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
B
B
A
1
1
1
4 A
32
7.469
11 Air-Conditioning Equipments MU-324 4 B
7/27/2019 Mech Vi Sdat
72/150
7/27/2019 Mech Vi Sdat
73/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
M-372-2K10ANKIT SHARMA
10-YMCAU-012HARSHARAN PAL SHARMA
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130721
ANKIT SHARMA
PASS
191
8.44
credit : 34
sgpa : 9.029
cgpa : 9.029
credit : 29
sgpa : 8.828
cgpa : 8.937
crediT : 32
sgpa : 8.062
cgpa : 8.642
crediT : 32 crediT : 32
sgpa : 8.25 sgpa : 8.25
cgpa : 8.543 cgpa : 8.484
1 Computer Aided Design MU-302 B4
2 Numerical Control of Machine Tools and Robotics MU-304 B4
3 Heat and Mass Transfer MU-306 A4
4 Machine Design - II MU-308 B4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
A+
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
C
A
C
1
1
1
4 B
32
8.219
11 Air-Conditioning Equipments MU-324 4 A
7/27/2019 Mech Vi Sdat
74/150
7/27/2019 Mech Vi Sdat
75/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
M-373-2K10ANMOL SIKKA
10-YMCAU-013UMANG SIKKA
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130722
ANMOL SIKKA
PASS
191
8.026
credit : 34
sgpa : 7.471
cgpa : 7.471
credit : 29
sgpa : 8.103
cgpa : 7.762
crediT : 32
sgpa : 7.875
cgpa : 7.8
crediT : 32 crediT : 32
sgpa : 7.844 sgpa : 8.25
cgpa : 7.811 cgpa : 7.899
1 Computer Aided Design MU-302 A4
2 Numerical Control of Machine Tools and Robotics MU-304 A4
3 Heat and Mass Transfer MU-306 B4
4 Machine Design - II MU-308 B4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
A+
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
A
A
A
1
1
1
4 A
32
8.656
11 Air-Conditioning Equipments MU-324 4 A
7/27/2019 Mech Vi Sdat
76/150
7/27/2019 Mech Vi Sdat
77/150
7/27/2019 Mech Vi Sdat
78/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
79/150
7/27/2019 Mech Vi Sdat
80/150
7/27/2019 Mech Vi Sdat
81/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
M-376-2K10ANURAG SHARMA
10-YMCAU-016SURESH KUMAR SHARMA
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130725
ANURAG SHARMA
Reappear (MU-306, MU-308)
0
0
credit : 34
sgpa : 6
cgpa : 6
credit : 29
sgpa : 6.862
cgpa : 6.397
crediT : 32
sgpa : 6.844
cgpa : 6.547
crediT : 32 crediT : 32
sgpa : 6.469 sgpa : 6.438
cgpa : 6.528 cgpa : 6.509
1 Computer Aided Design MU-302 B4
2 Numerical Control of Machine Tools and Robotics MU-304 D*4
3 Heat and Mass Transfer MU-306 E4
4 Machine Design - II MU-308 E4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
B
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
B
C
B
1
1
1
4 A
32
0
11 Air-Conditioning Equipments MU-324 4 B
7/27/2019 Mech Vi Sdat
82/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
83/150
7/27/2019 Mech Vi Sdat
84/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
85/150
7/27/2019 Mech Vi Sdat
86/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
87/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
M-379-2K10ATUL
10-YMCAU-019NAFE SINGH
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130728
ATUL
Reappear (MU-306)
0
0
credit : 34
sgpa : 0
cgpa : 0
credit : 29
sgpa : 6.586
cgpa : 0
crediT : 32
sgpa : 6.25
cgpa : 0
crediT : 32 crediT : 32
sgpa : 6.094 sgpa : 6.812
cgpa : 0 cgpa : 0
1 Computer Aided Design MU-302 B4
2 Numerical Control of Machine Tools and Robotics MU-304 C4
3 Heat and Mass Transfer MU-306 E4
4 Machine Design - II MU-308 D*4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
C
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
B
B
B
1
1
1
4 A
32
0
11 Air-Conditioning Equipments MU-324 4 B
7/27/2019 Mech Vi Sdat
88/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
89/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
M-380-2K10BALRAM
10-YMCAU-020MANGAT RAM
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130729
BALRAM
Reappear (MU-302, MU-304, MU-306, MU-308, MU-324)
0
0
credit : 34
sgpa : 0
cgpa : 0
credit : 29
sgpa : 0
cgpa : 0
crediT : 32
sgpa : 0
cgpa : 0
crediT : 32 crediT : 32
sgpa : 0 sgpa : 0
cgpa : 0 cgpa : 0
1 Computer Aided Design MU-302 E4
2 Numerical Control of Machine Tools and Robotics MU-304 E4
3 Heat and Mass Transfer MU-306 E4
4 Machine Design - II MU-308 E4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
C
C
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
C
C
C
1
1
1
4 A
32
0
11 Air-Conditioning Equipments MU-324 4 E
7/27/2019 Mech Vi Sdat
90/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
91/150
7/27/2019 Mech Vi Sdat
92/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
93/150
7/27/2019 Mech Vi Sdat
94/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
95/150
7/27/2019 Mech Vi Sdat
96/150
7/27/2019 Mech Vi Sdat
97/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Haryana State Legislative Act. No. 21 of 2009and recognised by UGC Act 1956 u/s 2(f) and 12(b)]
RESULT CUM GRADE CARD
BACHELOR OF TECHNOLOGY
(Under Credit Based System)
Name : University Roll No. :
Fathers Name : University Registration No. :
YMCAUST, Faridabad
Result :
July 25, 2013Date :
Total credits earned upto sixth semester :
Cumulative Grade Point Average (CGPA) :
SEMESTER-I SEMESTER-II SEMESTER-III SEMESTER-IV SEMESTER-V
S. No. CODE NO. CREDITS GRADESUBJECT
Total Credits
SGPA
Mechanical Engineering
M-384-2K10CHIRAG KHURANA
10-YMCAU-024MADAN MOHAN KHURANA
Sixth Semester Examination May, 2013
Sr. No. YMCA 05130733
CHIRAG KHURANA
Reappear (MU-306)
0
0
credit : 34
sgpa : 0
cgpa : 0
credit : 29
sgpa : 6.276
cgpa : 0
crediT : 32
sgpa : 0
cgpa : 0
crediT : 32 crediT : 32
sgpa : 0 sgpa : 0
cgpa : 0 cgpa : 0
1 Computer Aided Design MU-302 D4
2 Numerical Control of Machine Tools and Robotics MU-304 D4
3 Heat and Mass Transfer MU-306 E4
4 Machine Design - II MU-308 D*4
5
6
Industrial Engineering
Computer Aided Design Lab
MU-310
MU-312
B
C
4
1
7
8
9
10
Numerical Control of Machine Tools and Robotics Lab
Heat and Mass Transfer Lab
Seminar
Workshop - VI
MU-314
MU-316
MU-318
MU-320
C
C
C
1
1
1
4 A
32
0
11 Air-Conditioning Equipments MU-324 4 C
7/27/2019 Mech Vi Sdat
98/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
99/150
7/27/2019 Mech Vi Sdat
100/150
Each Letter Grade awarded to the student indicates the level of performance of student in a course and it
has a Grade Point for the purpose of computing the Cummulative Grade Point Average (CGPA) as given
below:
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 9
B Very Good 8
C Below Average 6
D Marginal 4
E Very Poor 0
A student who earns an E Grade in a course shall have to re- appear in that course in the subsequentexamination(s).
Cummulative Grade Point Average (CGPA) is the weighted average of all the grades & is computed as
follows:
CGPA = CiGi/Ci
Ci denotes the credits assigned to ith course and G i indicates the Grade Point Equivalent to the Letter
Grade obtained by the student to the ith course.
NOTE:
The Percentage of Marks obtained by a student can be calculated as = CGPA multiplied by 9.00
Issued on.
Prepared By ...........
Checked By ...........
7/27/2019 Mech Vi Sdat
101/150
YMCA UNIVERSITY OF SCIENCE & TECHNOLOGYFARIDABAD
[Established by Har
Top Related