7/30/2019 Iocl Proce Bid
1/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
I SITE CLEARANCE
1 1 Clearing the site of all weeds, shrubs, bushes, grass and growth of any
other vegetation including uprooting trees and saplings of girth upto 30
cms, measured at a height of 1 m above ground level and other
obstructions etc. complete and disposing off the materials to an
unobjectionable location irrespective of any lead and lift including filling
the pits/hollows formed by removing the weeds, shrubs, etc. with
approved selected earth, rolling the surface with hand roller, etc. as
SQM 2 Two only
2 Felling of trees of girth measured at a height of 1 m above ground levelincluding cutting of trunks and branches, removing the roots and
disposal of all materials and filling and compacting of earth.2 a) Beyond 30 cm girth and upto 60 cm girth EACH 74 Seventy Four only
3 b) Beyond 60 cm girth and upto 120 cm girth EACH 320 Three Hundred andTwenty only
4 3 Removing the roots by excavation of an already cut tree in the site upto
a maximum girth 120cm and backfilling and compacting of the pit all
complete as directed by Engineer-in-charge.
EACH 178 One Hundred andSeventy Eight only
II EARTHWORK EXCAVATION
4 Excavation for foundations, substructures, etc. to the following depths
below existing ground level, in all types of ordinary and hard soils
including hard murum, de-watering the excavated pits necessary
shoring, strutting, including backfilling sides of foundation with selected
excavated material, stacking earth for back filling and/or disposing
excess excavated material outside the premises of IOCL at an
unobjectionable place irrespective of lead etc complete (Excavation
/removal of rubble fill shall also be covered under this item. The rate
shall include dewatering of the excavated area till completion of all works
5 a) Upto 1.5 m CUM 125 One Hundred and
Twenty Five only6 b) Above 1.5 upto 3.0 m CUM 142 One Hundred and Forty
Two only7 c) Above 3.0 upto 4.5 m CUM 159 One Hundred and Fifty
Nine only8 d) Above 4.5 upto 6.0 m CUM 176 One Hundred and
Seventy Six only5 Excavation for foundations, substructures, etc. to the following depths
below existing ground level, in soft rock and laterite rock, de-watering
the excavated pits, including disposing excess excavated material
outside the premises of IOCL at an unobjectionable place irrespectiveof lead etc complete (The rate shall include dewatering of the excavated
area till completion of all works upto ground level)
9 a) Upto 1.5 m CUM 253 Two Hundred and Fifty
Three only10 b) Above 1.5 upto 3.0 m CUM 283 Two Hundred and Eighty
Three only11 c) Above 3.0 upto 4.5 m CUM 313 Three Hundred and
Thirteen only6 Excavation for foundations, substructures, etc. to the following depths
below existing ground level, in hard rock by chiselling/pneumatic drilling,
de-watering the excavated pits, including disposing excess excavated
material outside the premises of IOCL at an unobjectionable place
irrespective of lead etc complete (The rate shall include dewatering of
the excavated area till completion of all works upto ground level)
12 a) Upto 1.5 m CUM 560 Five Hundred and Sixty
only
INDIAN OIL CORPORATION LIMITED.(MARKETING DIVISION)
ANDHRA PRADESH STATE OFFICE
PRICE SCHEDULE
DESCRIPTION OF WORKS : INSTALLATION OF 5/10/15/20/50/70KL TANK,
DISPENSING UNITS, PIPELINES, OTHER CIVIL / MECHANICAL / ELECTRICAL /MAINTENANCE WORKS.
PART - A - CIVIL WORKS
Tenderer's Signature with seal 1
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
2/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
13 b) Above 1.5 upto 3.0 m CUM 590 Five Hundred and Ninety
only14 c) Above 3.0 upto 4.5 m CUM 620 Six Hundred and Twenty
only7 Excavation for foundations, substructures, etc. to the following depths
below existing ground level, in hard rock by controlled blasting, de-watering the excavated pits, including disposing excess excavated
material outside the premises of IOCL at an unobjectionable place
irrespective of lead etc complete (The rate shall include dewatering of
the excavated area till completion of all works upto ground level)15 a) Upto 1.5 m CUM 358 Three Hundred and fifty
Eight only16 b) Above 1.5 upto 3.0 m CUM 388 Three Hundred and
Eighty Eight only17 c) Above 3.0 upto 4.5 m CUM 418 Four Hundred and
Eighteen only8 Supply, f illing, spreading and compacting after sprinkling required
quantity of water using 8 to 10 ton roller to 95% of maximum dry density
in layers not exceeding 200 mm compacted thickness as per the
enclosed detailed specifications.
18 a) Imported approved quality murram CUM 290 Two Hundred and Ninetyonly19 b) Excavated earth CUM 46 Forty Six only
20 c) Selected imported earth CUM 229 Two Hundred and
Twenty Nine only9 Filling in plinth or where directed including supply and transporting,
spreading thoroughly compacted in layers not exceeding 200 mm in
depth complete
21 a) with selected excavated earth CUM 40 Forty only
22 b) with selected imported earth CUM 223 Two Hundred and
Twenty Three only23 c) with clean coarse river sand CUM 671 Six Hundred and Seventy
One only24 d) with manufactured sand CUM 613 Six Hundred and
Thirteen only25 10 Mass mechanicalexcavation for Land development, excavated earth
comprising of all kinds of soft and loose soil, murram, kankar, gravel,
soft rock, shrubs, grass etc., excluding hard rock, including filling at site
if necessary / stacking serviceable materials / disposing the surplus
excavated materials within / outside IOCL premises to an
unobjectionable location irrespective of any lead & lift, as directed by
IOCL. The excavation shall be termed as mass excavation if and only if
the quantity of excavation is minimum 100.00 CUM. (Measurement will
be onl for the uantit of cuttin
CUM 123 One Hundred and
Twenty Three only
III CONCRETE AND ALLIED WORKS
11 Providing and laying of plain cement concrete (PCC) of specified grade
conforming to latest IS 456 for all works in foundation, plinth &
superstructure. Item includes cost of all materials, mixing, pouring in
position, compaction, formwork, curing, finishing etc complete as
s ecified in detailed descri tion.26 a) Plain Cement Concrete 1:4:8 using 40mm nominal size aggregates CUM 2,157 Two Thousand One
Hundred and Fifty Sevenonly
27 b) Plain Cement Concrete 1:3:6 using 40mm nominal size aggregates CUM 2,418 Two Thousand Four
Hundred and Eighteen
only28 c) Plain Cement Concrete 1:2:4 using 20mm nominal size aggregates CUM 3,132 Three Thousand One
Hundred and Thirty Two
onl12 Providing and laying of reinforced cement concrete (RCC) of specified
grade conforming to latest IS 456 Item includes cost of all materials
excluding steel reinforcement, mixing, pouring in position, compaction,
formwork, scaffolding, curing, finishing etc complete as specified in
detailed descri tion.i In foundations plinth, beams, columns, pedestals, walls, pilecaps etc -
upto plinth level
29 a) Concrete of nominal mix 1:1.5:3 CUM 3,876 Three Thousand Eight
Hundred and Seventy Six
only
Tenderer's Signature with seal 2
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
3/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
ii In lintels, shelves, balconies, beams, sunshades, wall, column, roof
slab, staircase, fins, facia etc- above plinth level.
30 a) Concrete of nominal mix 1:1.5:3 CUM 4,936 Four Thousand Nine
Hundred and Thirty Six
only13 Providing and laying of reinforced cement concrete (RCC) of specified
grade conforming to latest IS 456 using RMC. Item includes cost of all
materials excluding steel reinforcement, mixing, pumping / pouring in
position, compaction, formwork, scaffolding, curing, finishing etc
complete as specified in detailed description.
i In foundations plinth, beams, columns, pedestals, walls, pilecaps etc -
upto plinth level31 a) RMC of mix M 20 from approved source CUM 4,590 Four Thousand Five
Hundred and Ninety only
ii In lintels, shelves, balconies, beams, sunshades, wall, column, roof
slab, staircase, fins, facia etc- above plinth level.32 a) RMC of mix M 20 from approved source CUM 5,614 Five Thousand Six
Hundred and Forteen
only
14 UNDER REAMED PILESa) Providing RCC 1:1:3 excluding steel reinforcement for under reamed
33 i 300mm dia RM 491 Four Hundred and Ninety
One only34 ii 400mm dia RM 909 Nine Hundred and Nine
only35 iii 450mm dia RM 1,162 One Thousand One
Hundred and Sixty Two
onlyb) Providing RCC 1:1:3 excluding steel reinforcement for under reamed
piles with single bulb beyond 6m deep as per IS 2911 etc. complete as
per the approved drawings
36 i 300mm dia RM 440 Four Hundred and Forty
only37 ii 400mm dia RM 760 Seven Hundred and Sixty
only38 iii 450mm dia RM 955 Nine Hundred and Fifty
Five onlyc) Extra cost for providing additional RCC bulb for under reamed piles
including all charges as per direction of IOCL for following sizes of piles
as per the approved drawings
39 i 300mm dia EACH 569 Five Hundred and sixty
Nine only40 ii 400mm dia EACH 916 Nine Hundred and
Sixteen only41 iii 450mm dia EACH 1,123 One Thousand One
Hundred and Twenty
Three only15 PRE-CAST CONCRETE WORKS
42 a) Providing, placing and fixing in position PCC / RCC Pre-cast slab units
in nominal mix of 1:1.5:3 with 20mm downgraded coarse aggregate, as
per approved drawings, including suitable form-work to provide smooth
f inish and thickness as specif ied in the drawings, etc complete.
(Reinforcement shall be measured & paid separately).
CUM 3,915 Three Thousand Nine
Hundred and Fifteen only
43 b) Making and fixing RCC pre-cast concrete kerbing blocks in varying
lengths to suite site conditions out of concrete mix 1:2:4 of desired
shape and size with chamfers and recessed edges as per drawings
including fixing them in position with C.M. 1:3, after excavating required
depth from the ground and consolidating the base, providing PCC1:4:8,
including necessary earthwork, PCC 1:4:8, reinforcement, plastering
etc., complete as per standard drawings and as directed. (Ref. Drawing
No. IOC/CAPEX/153)
CUM 3,649 Three Thousand Six
Hundred and Forty Nine
only
44 16 Making coping for the top of compound wall in plain cement concrete
Mix 1:2:4 upto 75mm thick, including cost of all materials, shuttering,
labour scaffolding etc. and finishing with 12mm thick plastering in CM
1:4 as per standard drawings. (Ref. Drawing No.
IOC/FEATS/CAPEX/831
RM 192 One Hundred and Ninety
Two only
Tenderer's Signature with seal 3
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
4/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
45 17 Providing and laying PCC screed of average thickness 50 mm in 1:2:4
mix with 12 mm downgraded size coarse aggregate including laying to
slope, curing, finishing top surface to receivewaterproofing treatment or
as shown on drawings or directed, rounding at edges etc. complete
including form-work & shuttering.
SQM 157 One Hundred and Fifty
Seven only
REINFORCEMENT
18 Providing, bending, laying, binding & fixing in posit ion reinforcement
steel of approved make, including supplying & providing soft annealed
wire used for binding at all levels and locations for RCC work with all
leads & lifts
46 a) TMT bars / High Yield Strength deformed bars conforming to IS 1786 KG 59 Fif ty Nine only
IV BRICK MASONRY
19 Brickwork with locally available good quality brick masonry with bricks
having minimum crushing strength of 35 kg/cm2 including scaffolding,
curing, etc. for walls, parapets, etc. below and above plinth at all
levels,joints/wall surface prepared either for pointing or plastering
complete, as per the enclosed detailed specifications, drawings or as
directed by IOCL47 a) Half brick masonry (115mm thick or nearest available size) in cement
mortar 1:4 with hoop iron comprising of 2 Nos. 6mm dia. round bars
after every fourth course
SQM 402 Four Hundred and Two
only
48 b) Full brick masonry (230mm thick or nearest available size) in cement
mortar 1:5 in foundation upto plinth level.
CUM 2,679 Two Thousand Six
Hundred and Seventy
Nine onl49 c) Full brick masonry (230mm thick or nearest available size) in cement
mortar 1:5 in superstructure
CUM 2,799 Two Thousand Seven
Hundred and Ninety Nine
only20 Supplying and laying brick pitching (on edge) with bricks having
minimum crushing strength of 35 kg/cm2 over a layer of sand for
levelling, including filling the interstices with cement mortar 1:3, packing
the bricks ro erl etc. com lete.50 a) 70mm thick SQM 212 Two Hundred and
Twelve only
V STONE MASONRY21 Providing Stone masonry with hard stone below and above plinth at all
levels including scaffolding, dressing of stones, packing interstices,
levelling, curing etc. complete
51 a) Random Rubble Masonry in CM 1:6 CUM 1,434 One Thousand Four
Hundred and Thirty Four
only52 22 Providing size stone masonry (f irst sort) in CM 1:6 with hard stone, in
foundation, plinth and superstructure including scaffolding and all lead
and lifts.
CUM 1,899 One Thousand Eight
Hundred and Ninety Nine
only
23 Providing Dry stone rubble packing of required compacted thickness
with hard stones set in regular lines, interstices thoroughly filled &
compacted with small chips / stone grit or any other approved fil ler
material or as directed by IOCL.
53 a) 230 mm. thk. SQM 215 Two Hundred and Fifteen
only54 24 Providing dry stone pitching 225 mm thick laid in courses and required
profile with hammer dressed stones having no side less than 150 mm,
with minimum depth 200 mm including preparing bedding surface,
pointing with CM 1:3 mix, all lead and lifts, etc. complete.
SQM 266 Two Hundred and Sixty
Six only
55 25 Providing laying hard core layer with 80 mm and down size well graded
hard broken stone including packing and fil ling voids with sand by
flooding in foundations.
CUM 1,142 One Thousand One
Hundred and Forty Two
only
Tenderer's Signature with seal 4
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
5/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
VI CONCRETE BLOCK MASONRY
56 26 Providing solid concrete block masonry in cement mortar 1:6 including
scaffolding, curing, etc. for walls, parapets, etc. above plinth at all
levels, joints / wall surface prepared either for fair face f inish or
plastering and including providing concrete, reinforcement and
shuttering (where required) at all door and window jambs, openings etc.complete as per enclosed specifications. (R.C.C runners, mullions and
transoms shall be measured and paid for separately under concrete,
reinforcement and shutterin items :
CUM 2,616 Two Thousand Six
Hundred and Sixteen
only
VII ANTI-TERMITE TREATMENT
57 27 Providing and injecting chemical emulsion for pre-constructional anti-
termite treatment and creating a chemical barrier as per IS 6313 (Part
II) for walls, trenches, foundation, top surface of plinth filling, foundation
of walls, f loor, along exterior perimeter of building etc. complete,
conforming to manufacturers specifications & as directed by IOCL
using Chloropyriphos Emulsifiable 20 % concentration (The actual
plinth area shall be measured for payment).
SQM 63 Sixty Three only
VIII DAMP PROOF COURSE
58 28 Providing & laying 40 mm thick damp proof coarse in plain cement
concrete mix 1:2:4 using 20mm downgraded coarse aggregate
including providing and mixing water proofing material 'Impermo' orequivalent @ 1Kg per 50Kg of cement and applying bitumen coating of
80/100 grade using 1.7 kg/Sq.m. of bitumen after cleaning the surface
with brushes, etc. complete as per specifications.
M2 140 One Hundred and Forty
only
IX ALUMINIUM WORKS
29 Supply & fixing Aluminium Doors, Windows & Partitions made of
powder coated aluminium sections of minimum coating thickness 15
microns complete as per IS 1948:1961. Item includes all fittings and
accessories complete as specified in detailed description.
59 a) For glazed partitions with 5mm galss as per approved drawings SQM 2,572 Two Thousand Five
Hundred and Seventy
Two only60 b) For fixed glazing with 12mm Glass as per approved drawings SQM 2,791 Two Thousand Seven
Hundred and Ninety One
only
61 c) For fixed glazing with 8mm Glass as per approved drawings SQM 2,436 Two Thousand Four Hundred and Thirty Six
only
62 d) For partly glazed (5mm thick) and partly panelled partitions using 12
mm thick both side laminated exterior grade particle board as per
approved drawings as per approved drawings
SQM 2,616 Two Thousand Six
Hundred and Sixteen
only63 e) For fully panelled partitions using 12 mm thick both side laminated
exterior grade particle board as per approved drawings
SQM 2,691 Two Thousand Six
Hundred and Ninety One
onl64 f) For fully glazed (5mm) doors, including providing and fixing hinges,
pivots, all fittings including locking arrangements, concealed tower bolts,
cost of PVC / Neoprene gasket, etc complete as per approved
drawings.
SQM 3,895 Three Thousand Eight
Hundred and Ninety Five
only
65 g) For partly glazed (5mm) partly panelled doors using 12 mm thick, both
side laminated exterior grade particle board including providing and
fixing hinges, pivots, all f itt ings including locking arrangements,concealed tower bolts, cost of PVC / Neoprene gasket, etc complete as
er a roved drawin s.
SQM 3,963 Three Thousand Nine
Hundrd and Sixty Three
only
66 h) For fully panelled doors using 12 mm thick, both side laminated exterior
grade particle board including providing and fixing hinges, pivots, all
fittings including locking arrangements, concealed tower bolts, cost of
PVC / Neoprene gasket, etc complete as per approved drawings.
SQM 3,866 Three Thousand Eight
Hundred and Sixty Six
only
67 i) For fully panelled doors using sandwich panel marine-ply core not less
than 3mm thick faced with 20 gauge powder coated aluminium sheets
including providing and fixing hinges, pivots, all fittings including locking
arrangements, concealed tower bolts, cost of PVC / Neoprene gasket,
etc complete as per approved drawings.
SQM 5,427 Five Thousand Four
Hundred and Twenty
Seven only
68 j) For fully panelled doors using PVC multiwall panels of approved make,
including providing and fixing hinges, pivots, all fittings including lockingarrangements, concealed tower bolts, cost of PVC / Neoprene gasket,
etc complete as per approved drawings.
SQM 3,972 Three Thousand Nine
Hundred and SeventyTwo only
Tenderer's Signature with seal 5
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
6/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
69 k) For sliding windows using 5 mm thick glass including providing
approved standard hardware, weather strips, glazed channels, nylon
gliders, rubber bumpers in interlocking sections, in-built self locking
arrangements, etc. complete as per approved drawings.
SQM 2,364 Two Thousand Three
Hundred and Sixty Four
Only
70 l) For openable casement windows using 5 mm thick glass includingapproved quality gaskets for proper fixing and making window water
tight, SS frictional / powder coated hinges, handle and other
accessories such as hinges, peg stay, handle etc., complete as per
approved drawings.
SQM 2,937 Two Thousand NineHundred and Thirty
Seven only
71 m) For adjustable louvered ventilators with 4 mm thick pinheaded glass
including necessary accessories like screws, rawl plugs, anodised
aluminium adjustable louver mechanism, all labour charges, sundries,
etc. complete as per approved drawings.
SQM 3,214 Three Thousand Two
Hundred and Forteen
only
30 Providing and fixing glazing using approved plain float glass in
aluminium doors, windows, ventilator shutters and partitions etc., with
PVC / neoprene gasket etc., complete as per approved drawings and
the directions of IOCL. (Item includes replacement of the damaged
glass and disposal of the same.)
72 a) 5 mm thick SQM 512 Five Hundred and Twelve
only73 b) 8 mm thick SQM 838 Eight Hundred and Thirty
Eight only74 c) 12 mm thick SQM 1,110 One Thousand One
Hundred and Ten only31 Providing and fixing ISI marked aluminium tower bolts ISI marked
anodized (anodic coating not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour or shade with necessary screws
etc. com lete.75 a) 200 x 10 mm EACH 110 One Hundred and Ten
only76 b) 100 x 10 mm EACH 56 Fifty Six only
32 Providing and fixing ISI marked aluminium handle ISI marked anodized
(anodic coating not less than grade AC 10 as per IS: 1868) transparent
or dyed to required colour or shade with necessary screws etc.
com lete.77 a) 125 mm EACH 36 Thirty Six only
78 b) 100 mm EACH 30 Thirty only
79 33 Providing and fixing ISI marked aluminium casement stays ISI marked
anodized (anodic coating not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour or shade with necessary screws
etc., complete.
EACH 249 Two Hundred and Forty
Nine only
34 FULLY GLAZED ENTRANCE DOOR
80 a) Supply and f ixing of Powder coated Aluminium fully glazed Entrance
door using 12mm thick float glass (includes two side aluminum frame)
including cost of f loor springs, all accessories and as per standard
approved drawings with powder coated aluminium sections.
SQM 3,269 Three Thousand Two
Hundrd and Sixty Nine
only
81 35 Supplying & fixing of aluminium grill of "Decogrille" or equivalent
approved make with 15 micron (min) anodising as per design code No.
DG-107 with aluminium Decogrill make frame of design No. DG-3
complete & DG 6 (H section) including cost and conveyance of all
materials,labour charges, sundries etc. complete as per directions of
IOCL.
SQM 1,614 One Thousand Six
Hundred and Forteen
only
Tenderer's Signature with seal 6
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
7/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
36 ALUMINIUM DOORS FOR PCF AND SPECIALISED WORKS
82 a) Supplying & f ixing of aluminium door shutters at site with 50 microns
Powder Coated aluminium sections of 83.50 x 44.45 x 3.00 mm (2.107
kg/rmt) with all necessary accessories like door lock, beadings, handles,
screws and rowl plugs etc. including supplying and fixing of 6mm thick
marine ply in fill pannel with 1 mm thk. laminate on both sides including
cost of all materials and labour charges, contigencies etc. complete as
per drawing & design given in all respect. (Main Door Shutters Ply-
Marino-1000-Royal Grey or Equivalent, Aluminium sections-Make Jindal
or equivalent, Aluminium Sections-Powder Coated in Brown Matt Finish
Ply Make-Century / Anchor / Greenply or Equivalent Laminate make -
Marino / Sunmica / Greenlam or Equivalent).
SQM 3,589 Three Thousand Five
Hundred and Eighty Nine
only
83 b) Supplying & f ixing of aluminium door shutters at site with 50 microns
Powder Coated aluminium sections of 83.50 x 44.45 X 3.00 mm (2.107
kg/rmt) with all necessary accessories like door lock, beadings, handles,
screws and rowl plugs etc. including supplying and fixing of 4mm thick
Aluminium Sheets powder coated on both sides including cost of all
materials and labour charges , contigencies etc., complete as per
drawing & design given in all respect. (W. C. Door Shutters Aluminium
sections - Make Jindal or, equivalent, Aluminium Sections - PowderCoated in Brown Matt Finish, Aluminium Sheet -Powder Coated in
Brown Matt Finish)
SQM 5,036 Five Thousand and
Thirty Six only
84 c) Supplying & Fixing of Aluminium door shutters with 50 micron powder
coated aluminium pipe frame section 44.45x25.40x3.20mm(0.605
Kg/rmt) & 50 micron powder coated aluminium door section
20.50x38.10x3.05mm (1.363 kg/rmt) with all necessary accessories like
tubular door lock, beadings, screws etc., including supplying & fixing of
Aluminium sheet 4mm thk. powder coated on both sides and aluminium
louver set powder coated. Aluminium Sheet Make - Jindal or Equivalent,
Aluminium Sections - Make Jindal or Equivaient, Aluminium Sections
Sheet & Louvers Powder Coated - Brown Matt, as Per Drawing &
Design Complete in all respect. (Janitors Cabinet)
SQM 4,724 Four Thousand Seven
Hudred and Twenty Four
only
X FITTINGS & HARDWARES FOR DOORS & WINDOWS37 Providing and fixing following hardware to door shutters with suitable
screws etc. complete as directed.
85 a) Godrej make 6 lever mortice lock with a pair of CP handles (Catalogue
No. Handle LKYLDM605, Mortice Lock LKYLDM606)
EACH 1,320 One Thousand Three
Hundred and Twenty
only86 b) Godrej make keyed cylindrical lock with a pair of Stainless steel knobs
(Catalogue No. LKYPDC527)
EACH 860 Eight Hundred and Sixty
only87 c) Door Stoppers EACH 49 Fourty Nine only
88 d) Supplying and fixing approved make hydraulic door closer including cost
and conveyance of all materials, labour charges for fixing, etc. complete
as per directions of IOCL
EACH 773 Seven Hundred and
Seventy Three only
89 e) Supplying and fixing approved make hydraulic f loor spring with cover
plates including cutting and making good floors for required embedding
in floor, cost and conveyance of all materials, labour charges for fixing,
etc.complete as per directions of IOCL
EACH 2,432 Two Thousand Four
Hundred and Thirty Two
only
90 f) Providing & fixing on doors / windows glass panes of approved make
brown / grey colour sun control f ilm (ref lective type) including all
charges.
SQM 372 Three Hundred and
Seventy Two only
XI ROLLING SHUTTER
38 Providing & fixing rolling shutter made out of 18 gauge steel sheets for
laths, including bottom rail, guide channels, lock plates, locking
arrangement, fixing bolts, pulling handles, hood, rolling arrangement,
standard make springs in brackets, necessary bearings, etc. including
fixing of frames with rag bolts, grouting of parts in position etc. and also
including two coats of zinc phosphate primer and two coats of synthetic
enamel paint of approved colour, shade & brand etc. complete as per
relevant IS standard or as per manufacturer's specif ications or as
directed by IOCL.91 a) Self-coiling type rolling shutter. SQM 2,485 Two Thousand Four
Hundred and Eighty Five
only
Tenderer's Signature with seal 7
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
8/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
92 b) Gear operated type-rolling shutters with gear box and crank handle at
waist level on outside.
SQM 2,969 Two Thousand Nine
Hundred and Sixty Nine
onl39 Same as item No.38 above but with grill of size 600mm high
93 a) Self-coiling type rolling shutter SQM 2,694 Two Thousand SixHundrd and Ninety Four
only
94 b) Gear operated type-rolling shutters with gear box and crank handle at
waist level on outside.
SQM 3,178 Three Thousand One
Hundred and Seventy
Eight only
XII PLASTERING AND POINTING
40 Providing & applying cement plaster for walls, columns, beams etc.
including chipping concrete surface if required, finishing, scaffolding,
curin etc. com lete:95 a) Cement plaster 12mm thick in CM 1:4 SQM 78 Seventy Eight only
96 41 Providing & applying 6 mm thick plain faced cement plaster in CM 1:3
for underside of ceilings including hacking / chipping concrete surface,
finishing, scaffolding, curing, etc. complete.
SQM 61 Sixty One only
97 42 Providing and applying 20 mm thick cement plaster in CM 1:4 in two
coats, under layer 10mm thick (rough) and top layer 10mm thick floated
hard and trowelled smooth including chipping concrete surface
wherever re uired curin scaffoldin etc. com lete.
SQM 121 One Hundred and
Twenty One only
43 Making grooves, bands, copings, drip course, etc. complete in plastered
surface in CM 1:3 as per approved drawings and instructions of IOCL,
etc. complete
98 a) Grooves (horizontal / vertical) as per approved drawings upto 10mm
wide and 10mm deep
RM 14 Forteen only
99 b) Providing 12mm thick plastering for Drip course of size as per
drawings but not ess than a width of 20mm with cement mortar 1:4
including scaffolding, curing, finishing, etc. complete:
RM 18 Eighteen only
100 44 Providing and f ixing of 200mm wide chicken wiremesh of 24 gauge at
the junction of brickwork and RCC work, including fixing with nails, rawl
plugs etc; before applying plaster.
SQM 37 Thirty Seven only
45 Providing Pointing in brick masonry / Rubble masonry in cement sand
mortar 1:3 at all levels including raking joints, scaffolding, curing etc.
complete for :
101 a) Flush pointing SQM 48 Forty Eight only
102 b) Ruled pointing SQM 51 Fifty One only
103 46 Providing & applying cement plaster 1:3 12mm thick with neat cement
flushing coat including chipping concrete surface if required, finishing,
scaffolding, curing, etc., complete
SQM 110 One Hundred and Ten
only
XIII FLOOR FINISHES, SKIRTING AND DADO
47 Providing and laying 1st quality white ceramic glazed wall tiles of
approved make of minimum thickness 5mm as approved by the
Engineer-in-Charge in skirting, dado, risers, etc. over 12mm thick
cement mortar 1:3 mix, jointing with grey cement slurry and pointing
with tile joint filler of approved make, including cost of all materials,
labour, etc., complete.
104 a) 200 x 300 SQM 572 Five Hundred andSeventy Two only
48 Providing and laying 1st quality coloured ceramic glazed wall tiles of
minimum thickness 5mm of approved make in all colours/shades of
following sizes as approved by the Engineer-in-Charge in skirting, dado,
risers, etc. over 12mm thick cement mortar 1:3 mix, jointing with grey
cement slurry including pointing with tile joint filler of approved make
and shade, cost of all materials, labour etc., complete
105 a) 200 x 300 SQM 575 Five Hundred and
Seventy Five only106 b) 300 x 400 SQM 702 Seven Hundred and Two
only
Tenderer's Signature with seal 8
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
9/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
49 Providing and laying 1st quality ceramic floor tiles (including treads) of
minimum thickness 8mm of approved make in all colours/shades of
following sizes as approved by the Engineer-in- Charge over 20mm
thick cement mortar 1:4 mix, jointing with grey cement slurry including
pointing with tile joint filler of approved make and shade, of matching
shade including cost of all materials, labour etc., complete107 a) 300 x 300 SQM 560 Five Hundred and Sixty
only108 b) 400 x 400 SQM 607 Six Hundred and Seven
only109 c) 600 x 600 SQM 723 Seven Hundred and
Twenty Three only50 Providing and laying of 1st quality vitrified ceramic floor tiles (including
treads) of approved make in all colours/shades of following sizes of
thickness as specified by the manufacturer and as approved by the
Engineer-in-Charge over 20mm thick cement mortar 1:4 mix, jointing
with grey cement slurry including pointing with tile joint filler of approved
make and shade, including cost of all materials, labour etc., complete
110 a) 400 x 400( minimum dimensions and thickness 7.5 8 mm) SQM 1,017 One Thousand and
Seventeen only111 b) 600 x 600( minimum dimensions and thickness 9.6 10 mm) SQM 1,176 One Thousand One
Hundred and Seventy Six
only112 51 Providing and laying 50 mm thick Indian Patent Stone flooring, treads,
landings, etc. comprising of 38 mm thick under layer of cement
concrete 1:2:4 ( with graded stone aggregates of nomial size 12.5mm)
and 12 mm thick top layer in cement mortar 1:1 including preparation of
base, supplying & providing glass strips of size 40mm x 4mm in joints,
rounding corners and junctions, casting in chequered board pattern,
finishing, shuttering, curing, etc. complete
SQM 322 Three Hundred and
Twenty Two only
113 52 Supplying and laying of pressed cement concrete tiles of minimum
thickness 20mm of approved make, size & colour with necessary 20mm
thick CM 1:4 bedding, jointed with neat cement slurry including pointing
with white cement mixed with pigment to match the shade of the tiles
including rubbing & cleaning, preparation of base, cost of all materials
and labour etc., complete.
SQM 774 Seven Hundred and
Seventy Four only
114 53 Supplying and laying of plain white marble of 18 mm thick (sample of
marble shall be approved by Engineer-in-charge) over 20mm (average)
thick CM 1:4 bedding and jointed with white cement slurry including
rubbing, mirror polishing, cost of all materials and labour etc., complete
SQM 1,663 One Thousand Six
Hundred and Sixty Three
only
115 54 Supplying and fixing of 10mm thick mirror polished black granite tiles for
f looring / pump island edges etc. over 12mm thick CM 1:4 including
sprinkling sand after applying Araldite, cost of all materials and labour
etc. complete.
SQM 1,498 One Thousand Four
Hundred and Ninety
Eight only
116 55 Supplying and fixing of mirror polished black granite slab of 18-20 mm
thick for flooring / pump island including bedding in cement mortar 1:4,
20mm thick, sprinkling sand after applying Araldite, cost of all material
and labour etc., complete (Payment for nosing will be made separately
under res ective item
SQM 2,655 Two Thousand Six
Hundred and Fifty Five
only
56 Providing edge nosing for granite slabs including all charges.
117 a) Half round edge nosing (Quarter portion of circle) RM 211 Two Hundred and Eleven
only
118 b) Full round edge nosing (Half portion of circle) RM 245 Two Hundred and Forty
Five only
57 Supplying and fixing of cudappa slab in shelves for buildings
119 a) 25mm thick both side polished jointed with CM 1:4 SQM 719 Seven Hundred and
Nineteen only58 Supplying and laying of approved Kota stone slabs (sample of stone
shall be approved by Engineer-in-charge) of specified size over 20mm
thick bedding in CM 1:4 and jointed with grey cement slurry mixed with
pigment to match the shade of the slab including rubbing and polishing
complete
120 a) 25mm thick in flooring SQM 624 Six Hundred and TwentyFour only
Tenderer's Signature with seal 9
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
10/63
7/30/2019 Iocl Proce Bid
11/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
135 71 Supplying & f ixing of 16 gauge GI plain sheet of approved make with
necessary folding / fabrication using hydraulic press for flashing sheet /
fascia, etc. in roofing / buildings / sheds, hoardings, etc. including all
necessar fixtures etc. com lete
SQM 1,083 One Thousand Eighty
Three only
136 72 Supplying & fixing of 18 gauge MS sheet with necessary folding /
fabrication using hydraulic press for f lashing sheet / fascia, etc. inroofing / buildings / sheds, hoardings, etc. including all necessary
fixtures etc., complete
KG 71 Seventy One only
137 73 Supplying & fixing of 16 gauge MS sheet with necessary folding /
fabrication using hydraulic press for f lashing sheet / fascia, etc. in
roofing / buildings / sheds, hoardings, etc. including all necessary
fixtures etc., complete
KG 71 Seventy One only
138 74 Supplying & fixing of 14 gauge (2 mm) MS sheet with necessaryfolding
/ fabrication using hydraulic press for flashing sheet / fascia, etc. in
roofing / buildings / sheds, hoardings, etc. including all necessary
fixtures etc., complete
KG 71 Seventy One only
139 75 Supplying & fixing of 22 gauge GI corrugated sheet of approved make
including necessary J/L bolts, nuts, washers, all labour charges,
scaffolding, sundries etc. complete.
SQM 738 Seven Hundred and
Thirty Eight only
140 76 Supplying & fixing 18 gauge GI ridges fabricated out of GI sheets of
approved make as per specifications including all the necessary fittings,
fastners, etc. complete
RM 256 Two Hundred and Fifty
Six only
141 77 Supplying & f ixing half round PVC gutters 160 mm of approved make
as per specifications including all the necessary fittings, fastners, etc.
complete
RM 229 Two Hundred and
Twenty Nine only
142 78 Supplying & f ixing of 6 mm thick corrugated AC sheet of approved for
roofing / wall cladding etc. including necessary J/L bolts, nuts, washers,
all labour charges, scaffolding, sundries etc. complete.
SQM 192 One Hundred and Ninety
Two only
143 79 Supplying & fixing 6 mm thick AC ridges of approved make as per
standard practice including all the necessary fittings, fastners, etc.
complete
RM 173 One Hundred and
Seventy Three only
144 80 Providing and fixing 700mm wide rain water gutter fabricated out of 18
Gauge Aluminium Sheets of 1200 mm width including MS clamp
supports, fittings, fastners, etc. complete, as per detailed drawings. (No
oints shall be rovided in the utter
RM 1,148 One Thousand One
Hundred and Forty Eight
only
145 81 Providing and fixing 700mm wide rain water gutter fabricated out of 18
Gauge GI Sheets of 1200 mm width including MS clamp supports,
fittings, fastners, etc. complete, as per detailed drawings.
RM 1,006 One Thousand and Six
only
146 82 Providing and f ixing Klippon Galvalume / Zincalume 0.55 mm TCT or
equivalent steel roofing system of approved make conforming to
ASTM:A446 as per standard specifications & manufacturers
instructions, etc. complete as directed by IOCL
SQM 1,121 One Thousand One
Hundred and Twenty
One only
147 83 Providing and fixing ridges suitable for Klippon roofing system 500 mm
wide 0.55 mm TCT equivalent of approved make conforming to
ASTM:A446 as per standard specifications & manufacturers
instructions, etc.complete as directed by IOCL
RM 903 Nine Hundred and Three
only
148 84 Providing and f ixing High Rib Galvalume / Zincalume 0.47 mm TCT or
equivalent steel roofing system of approved make as per standard
specifications & manufacturers instructions, etc. complete as directed
by IOCL
SQM 805 Eight Hundred and Five
only
149 85 Providing and fixing ridges suitable for High Rib Galvalume / Zincalume
roofing system 500 mm wide 0.47 mm TCT equivalent of approved
make as per standard specifications & manufacturers instructions,
etc.com lete as directed b IOCL
RM 644 Six Hundred and Forty
Four only
150 86 Providing and fixing High Rib coloured Galvalume / Zincalume 0.50 mm
TCT or equivalent steel roof ing system of approved make as per
standard specifications & manufacturers instructions, etc. complete as
directed by IOCL
SQM 920 Nine Hundred and
Twenty only
151 87 Providing and fixing ridges suitable for High Rib coloured Galvalume /
Zincalume roofing system 500 mm wide 0.50 mm TCT equivalent of
approved make as per standard specif ications & manufacturers
instructions, etc.complete as directed by IOCL
RM 759 Seven Hundred and Fifty
Nine only
XVI FALSE CEILING
Tenderer's Signature with seal 11
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
12/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
152 88 Supply and installation of false ceiling system of approved make as per
vendor list comprising of 150/200 mm wide panels (150F/200F
including filler strips, if any) formed out of pre-coated, weather resistant
and petroleum fumes resistant steel panels coated in white colour
including the cost of providing and fixing rigid suspension arrangement
as per drawings and specifications. The direction of the panel should beperpendicular to the road. The manufacturers specifications should be
made available to the Site Engineer and the work should be executed
strictly as per manufacturers specification.
SQM 1,265 One Thousand Two
Hundred and Sixty Five
only
153 89 Providing and Fixing TRAC -Tile or Equivalent False ceiling inside the
Sales rooms and Convineos, comprising of 600 mm x600 mm size
aluminium tiles as per specifications including glass wool insulation
above the false ceiling and as directed by the IOCL.
SQM 2,013 Two Thousand and
Thirteen only
154 90 Providing Gypsum board false ceiling of 12.5 mm thick tapered edge
gypsum board using standard GI sections including scaffolding,
labour, making necessary cutouts, sundries etc. complete as per
standard specifications and as directed by IOCL.
SQM 573 Five Hundred and
Seventy Three only
XVII PROVIDING & CONSTRUCTING DRIVEWAYS
A FLEXIBLE PAVEMENTS
155 91 Providing Granular sub-base for the specified depth in layers of 200mmthick, using well graded gravel or natural sand & gravel / crushed stone
mix as per IS sieve designation 26.5mm to 0.075mm with minimum
CBR value of 20%. The material passing 425 microns sieve to be tested
according to IS:2720 (Part V) shall have liquid limit and plasticity index
not more than 25% and 6% respectively. The granular sub base to be
compacted to 95% of the maximum dry density with 8-10 ton road roller.
CUM 840 Eight Hundred and Fortyonly
156 92 Providing and laying WBM 100 mm thick consolidated thickness for
bottom layer (GRADE I) of sub base, metal size ranging from 90 to
45mm with screenings (13.2 mm and less) and binding materials to fill
the voids and compacted with 8-10 Ton road roller including all charges.
SQM 130 One Hundred and Thirty
only
157 93 Providing and laying WBM 75 mm thick consolidated thickness
(GRADE II) for middle layer of sub base metal size ranging from 63 to
45 mm with screeingings (13.2 mm and less) and binding materials to
fill the voids and compacted with 8-10 Ton road roller including all
charges.
SQM 112 One Hundred and
Twelve only
158 94 Providing and laying WBM 75 mm thick consolidated thickness
(GRADE III) for top layer of sub base metal size ranging from 53 to 22.4
mm with screeingings (13.2 mm and less) and binding materials to fill
the voids and compacted with 8-10 Ton road roller including all charges.
SQM 112 One Hundred and
Twelve only
159 95 Providing and laying wet mix macadam base course using 45 mm and
down graded aggregates, including mixing, laying and compacting
clean, crushed and graded aggregates and granular material premixed
with water to a dense mass on a prepared subbase in accordance with
the requirements of the specifications, drawings and as directed by
IOCL.
CUM 1,170 One Thousand One
Hundred and Seventy
only
160 96 Providing and laying rubble of size 150mm to 230mm for soling
including levelling, hand packing, blinding, wedging to a thickness of230mm average and consolidating by 8-10 tonnes road roller etc.
complete.
CUM 610 Six Hundred and Ten
only
97 BITUMINOUS MACADAM
161 a) Providing and laying Bituminous Macadam of 75mm thick with
compacted crushed aggregates of size ranging from 45mm to 22.4mm
premixed with a bituminous binder (grade 80/100) laid immediately after
mixing over the base and compacted with 8 to 10 tonnes road roller etc.,
complete
SQM 355 Three Hundred and Fifty
Five only
162 98 Providing 75mm thick Built Up Spray Semigrout using 40mm IRC size
HBG machine crushed metal laid over a tack coat over the existing B.T
surface as per detailed specifications.
SQM 264 Two Hundred and Sixty
Four only
99 PREMIX CARPET (OTHER THAN HOT MIX PLANT PREMIX AND
USE OF MECHANICAL PAVER FOR THE APPROACH ROAD /
INSIDE OUTLET)
Tenderer's Signature with seal 12
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
13/63
7/30/2019 Iocl Proce Bid
14/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
100 SEAL COAT
166 a) Providing and laying 6 mm thick seal coat with tack coat including
preparing surface of road with bitumen heated in bitumen boiler fitted
with the spray set spraying using 98 kg of bitumen of grade 80/100 and
blindng surface with 0.90 cum of stone aggregate of 6.3mm size
(passing 11.2mm sieve and retained on 2.36mm sieve only) per 100SQM of road surface including rolling and finishing with power road
roller all complete.
SQM 69 Sixty Nine only
101 PREMIX CARPET USING HOT MIX PLANT PREMIX AND USE OF
MECHANICAL PAVER FOR THE APPROACH ROAD / INSIDE
OUTLET.
167 a) Providing and laying 50mm premix bituminous macadam base course
with stone aggregate of quality size and grading as specif ied in
technical specification and straight run bitumen of grade 80/100 @3.5%
by weight of total mix including hot mixing of stone aggregate and
bitumen in hot mix plant, transporting mixed material and laying mixed
material with paver finisher to the required level and grade, rolling with
road roller of 8 to 10 tonne capacity to achieve the required compaction
and density.
SQM 277 Two Hundred and
Seventy Seven only
168 b) Providing, laying and consolidation, semi dense bituminous concrete on
prepared surface, with specified graded crushed aggregates as per
technical specification for wearing course, including, heating, course,
including, heating, aggregate and binder in hot mix plant, laying to
uniform consolidated thickness of 25mm, and rolling with 8 - 10 power
roller to required compaction over a tack coat of 2.0 Kg per 10 Sqm.
(Using bitumen of grade 80/100)
SQM 177 One Hundred and
Seventy Seven only
169 c) Providing and laying 50mm premix bituminous macadam base course
with stone aggregate of quality size and grading as specif ied in
technical specification and straight run bitumen of grade 60/70 @3.5%
by weight of total mix including hot mixing of stone aggregate and
bitumen in hot mix plant, transporting mixed material and laying mixed
material with paver finisher to the required level and grade, rolling with
road roller of 8 to 10 tonne capacity to achieve the required compaction
and density.
SQM 282 Two Hundred and Eighty
Two only
170 d) Providing, laying and consolidation, semi dense bituminous concrete on
prepared surface, with specified graded crushed aggregates as per
technical specification for wearing course, including, heating, course,
including, heating, aggregate and binder in hot mix plant, laying to
uniform consolidated thickness of 25mm, and rolling with 8 - 10 power
roller to required compaction over a tack coat of 2.0 Kg per 10 Sqm.
(Using bitumen of grade 60/70)
SQM 180 One Hundred and Eighty
only
102 CONCRETE PAVER BLOCKS
Providing and laying Pre-cast cement concrete block paved driveway
including supplying 80mm thick pre-cast machine made cement
concrete block of approved size, shape, shade and manufacturers and
as per IOCL's specifications. The paver blocks shall have peripheral
chamfer, with average crushing strength not less than 40 N/Sq.mm as
per BS6717 Part -1(1986), maximum water absorption of 2% after 10
minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional
deviations of +/- 2mm on length & width and +/- 3mm on on thickness.
The job includes supplying & laying a layer of 50mm thick clean course
sand on thoroughly compacted sub-base below the paver blocks,
cutting the paver blocks wherever required with hydraulic splitter, filling
in the joints at the edges of paver blocks with sand,compacting with
machine vibrator to required line and level, etc. complete. (Payment for
provision of edge restraints shall be made separately)
171 a) with 80mm thick paver blocks (grey / coloured) SQM 706 Seven Hundred and Six
only172 b) with 80mm thick paver blocks (reflective) SQM 930 Nine Hundred and Thirty
only
Tenderer's Signature with seal 14
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
15/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
B RIGID PAVEMENTS
173 103 Providing and laying design mix reinforced cement concrete in roads /
drive-ways works of Grade M25 having test beam flexural strength of
minimum 35 kg / Sq.cm at 28 days using minimum 330 kg of cement
per cubic metre of concrete, coarse sand and graded stone aggregates
of 20 mm nominal size in appropriate proportions as per IOCLspecification, including dewatering with vacuum pump, finishing the the
floor with power trowel and well compacted with plate compactor using
double beam screed vibrator with proper side shuttering (Rate shall
include cost of shuttering & vacuum dewatering. Payment for
reinforcement shall be made separately)
CUM 4,297 Four Thousand Two
Hundred and Ninety
Seven only
174 104 Supplying & fixing in position 25mm thick bitumen imprignated fibre
board "SHALITEX" or equivalent, as approved by Engineer-in-charge,
conforming to IS 1838 including cost of primer, sealing compound with
bitumastic filler to a depth of 50mm etc. in the expansion joints etc. as
per drawings, specfications and directions of IOCL complete.
SQM 679 Six Hundred and Seventy
Nine only
175 105 Making thermal expansion joints by providing grooves 1/4 depth of
concrete thickness and filling with polysulphide sealing compound (2
pack system) for a size of 20 mm x 15 mm with lower portion filled with
filler material as per drawings, specfications and directions of IOCLcomplete.
RM 331 Three Hundred and
Thirty One only
XVIII RCC Hume Pipes
106 Supplying and laying RCC Hume pipes of NP2 class conforming to IS
458 under driveway and for culverts including excavation, providing
collar joints, backfilling, etc. complete as directed by IOCL.
176 a) 150 mm dia. RM 440 Four Hundred and Forty
only177 b) 200 mm dia. RM 548 Five Hundred and Forty
Eight only178 c) 300 mm dia. RM 722 Seven Hundred and
Twenty Two only107 Supplying and laying RCC Hume pipes of NP3 class conforming to IS
458 under driveway and for culverts including excavation, providing
collar joints, backfilling, etc. complete as directed by IOCL.
179 a) 350mm dia RM 1,375 One Thousand ThreeHundred and Seventy
Five only180 b) 450mm dia RM 1,816 One Thousand Eight
Hundred and Sixteen
only181 c) 600 mm dia. RM 2,445 Two Thousand four
Hundred and Forty Five
only182 d) 900 mm dia RM 4,204 Four Thousand Two
Hundred and Four only183 e) 1000mm dia RM 4,949 Four Thousand Nine
Hundred and Forty Nine
only184 f) 1200 mm dia RM 6,956 Six Thousand Nine
Hundred and Fifty Six
only
108 Supplying and laying RCC Hume pipes of NP 4 Class (without collars)
conforming to IS 458 under driveway and for culverts including
excavation, providing collar joints, backfilling, etc. complete as directed
b IOCL.185 a) 450 mm dia RM 1,758 One Thousand Seven
Hundred and Fifty Eight
only
186 b) 600mm dia RM 2,499 Two Thousand Four
Hundred and Ninety Nine
only
187 c) 1000 mm dia RM 4,818 Four Thousand Eight
Hundred and Eighteen
only
188 d) 1200 mm dia RM 7,021 Seven Thousand andTwenty One only
Tenderer's Signature with seal 15
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
16/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
XIX STRUCTURAL STEEL WORKS
109 Supplying and fabricating (Shop Fabrication to be done as per
specifications and approved fabrication drawings), transporting to site &
erecting structural steel members for canopy and other works including
two coats of zinc phosphate primer and two coats of synthetic enamel
paint, provision of necessary erection bolts, nuts, washers, cleats,stiffeners, gussets, base plate and all operations such as, but not
limited to, preheating as per specifications, straightening, cutting,
drilling, grinding etc. complete. (Weight of erection bolt and welds shall
not be considered for a ment189 a) Members fabricated from rolled steel sections/plates/strips, etc KG 68 Sixty Eight only
190 b) Members fabricated from tubular sections KG 79 Seventy Nine only
191 110 Extra over and above item No. 109 for structural steel work for painting
polyurethene paint using zinc ethyl sil icate primer, polyamid mio
undercoat,and alphatic acrylic polyurethene finish paint, instead of two
coats of zinc phosphate primer and two coats of synthetic enamel
aint includin all char es.
KG 4 Four only
192 111 Supplying & fixing MS security gril ls of approved design for windows,
ventilators, doors etc., welded type using MS rounds, MS squares, MS
flats etc. including painting two coats of zinc phosphate primer and two
coats of synthetic enamel paint, etc. complete as per drawings anddirections of IOCL.
KG 74 Seventy Four only
193 112 Supplying & fixing MS gratings of welded type for drain covers using
MS flats and angles, including painting two coats of zinc phosphate
primer and two coats of synthetic enamel paint, etc. complete as per
drawin s and directions of IOCL.
KG 77 Seventy Seven only
113 Supplying and fixing MS foundation bolts with necessary GI nuts and
washers of specified sizes, all conforming to relevant Indian Standards
and as a roved b En ineer-in-char e :194 a) Bolts of all sizes upto and including 450 mm length. KG 99 Ninety Nine only
195 b) Bolts of all sizes above 450 mm length. KG 97 Ninety Seven only
196 114 Providing & fixing concertina fencing comprising of GI concertina strips
and barbed wire of 12SWG, 2 strands & 4 point including MS angle
posts, straightening, fixing with MS angle post using clips, drilling holes,
painting MS bar / angles with two coats of zinc phosphate primer and
two coats of aluminium paint etc. complete as per drawing No. DRG.
No. ENG/ 404-3/3, and as per directions of IOCL.
RM 519 Five Hundred and
Nineteen only
197 115 Providing and f ixing chain link fencing, having mesh 50mmx50mm
made out of 10 gauge hot dipped galvanised wire and barbed wire of
12SWG, 2 strands & 4 point with necessary nuts, bolts, washers and
other fixtures required, painting MS bar / angles with two coats of primer
and two coats of aluminium paint etc. complete as per drawing No.
DRG. No. ENG/ 403-1/2, 2/2 and specif ications. (The rate for civil
works like excavation, brick masonry, PCC etc. shall be paid
se aratel .
RM 1,001 One Thousand and One
only
198 116 Providing and f ixing chain link fencing, using 10SWG GI wire 50mm
square mesh fixed with 25 mm square tube of 16 guage with vertical
post of 50 mm x 50 mm with necessary nuts, bolts, washers and other
fixtures required, painting two coats of zinc phosphate primer and two
coats of aluminium paint etc. complete as per drawing No.
IOC/CAPEX/154 A and specifications. (The rate for civil works likeexcavation, brick masonry, PCC etc. shall be paid separately).
RM 950 Nine Hundred and Fifty
only
XX BORE WELL
117 Drilling Borewell
199 a) Identifying the point for drilling the bore well. LS 2,500 Two Thousand and Five
Hundred only200 b) Drilling 165mm-180mm diaborewell up to a depth of 65RM inclusive of
all works necessary for commissioning.
RM 286 Two Hundred and Eighty
Six only201 c) Drilling165mm-180mm dia borewell f rom 65 - 100RM inclusive of all
works necessary for commissioning
RM 325 Three Hundred and
Twenty Five only202 d) Drilling 165mm-180mm dia borewell a beyond 100RM inclusive of all
necessary for commissioning.
RM 401 Four Hundred and One
only203 e) Supplying and fixing high density polymer air pipe of 12mm dia for
borewell upto a depth of 65RM.
RM 36 Thrity Six only
204 f) Supplying and fixing high density polymer air pipe of 12mm dia for
borewell from 65 -100RM.
RM 41 Forty One only
205 g) Supplying and fixing high density polymer air pipe of 12mm dia for borewell beyond 100RM.
RM 47 Forty Seven only
Tenderer's Signature with seal 16
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
17/63
7/30/2019 Iocl Proce Bid
18/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
235 g) 75mm (6 kg/cm2) RM 126 One Hundred and
Twenty Six only236 h) 110mm (6 kg/cm2) RM 237 Two Hundred and Thirty
Seven only237 i) 160mm (6 kg/cm2) RM 482 Four Hundred and Eighty
Two only125 VITREOUS CHINA ORISSA PATTERN WC
238 a) Providing & f ixing f irst quality white vitreous china orissa pattern WC
squatting pan of size 580 x 440 mm with 10 litre PVC low level flushing
cistern with all fittings as per detailed specifications.
EACH 3,120 Three Thousand One
Hundred and Twenty
only239 b) Providing & fixing first quality coloured vitreous china orissa pattern WC
squatting pan of size 580 x 440 mm with 10 litre PVC low level flushing
cistern with all fittings as per detailed specifications.
EACH 3,634 Three Thousand Six
Hundred and Thirty Four
only
126 VITREOUS CHINA EUROPEAN TYPE WC
240 a) Providing & fixing first quality white vitreous china European type WC
pan with 10 litre PVC low level flushing cistern and seat cover with all
fittings as per detailed specifications.
EACH 2,920 Two Thousand Nine
Hundred and Twenty
only241 b) Providing & fixing first quality coloured vitreous china European type
WC pan with 10 litre PVC low level flushing cistern and seat cover with
all fittings as per detailed specifications.
EACH 3,477 Three Thousand Four
Hundred and Seventy
Seven only
127 SOLID PLASTIC SEAT COVER FOR EWC242 a) Providing and fixing solid plastic seat and lid of approved make for
European type WC pan including all charges.
EACH 316 Three Hundred and
Sixteen only243 b) Providing and fixing coloured solid plastic seat and lid of approved
make for European type WC pan including all charges.
EACH 443 Four Hundred and Forty
Three only128 PVC FLUSHING CISTERN
244 a) Providing & fixing 10 litres white PVC flushing cistern including
supporting brackets, mosquito proof coupling of approved make, pull
handle, etc. complete as directed by IOCL. (Item includes removing the
old fittings in case of replacement without any extra cost)
EACH 963 Nine Hundred and Sixty
Three only
245 b) Providing & fixing 10 litres coloured PVC flushing cistern including
supporting brackets, mosquito proof coupling of approved make, pull
handle, etc. complete as directed by IOCL. (Item includes removing the
old fittings in case of replacement without any extra cost)
EACH 993 Nine Hundred and Ninety
Three only
129 FLAT BACK OR CORNER TYPE URINAL
i Providing & fixing white vitreous china flat back or wall corner type
lipped front urinal basin of the following sizes with drain pipe and all
fittings complete as directed by IOCL. (Item includes removing the old
fittings in case of replacement without any extra cost)
246 a) 430 x 260 x 350mm size flat back urinal. EACH 1,512 One Thousand Five
Hundred and Twelve only
247 b) 430 x 265 x 340mm size angle back urinal EACH 1,652 One Thousand Six
Hundred and Fifty Two
onlyii Providing & f ixing coloured vitreous china f lat back or wall corner type
lipped front urinal basin of the following sizes with drain pipe and all
fittings complete as directed by IOCL. (Item includes removing the old
fittings in case of replacement without any extra cost)
248 a) 430 x 260 x 350mm size flat back urinal. EACH 1,745 One Thousand Seven
Hundred and Forty Five
only249 b) 430 x 265 x 340mm size angle back urinal EACH 1,955 One Thousand Nine
Hundred and Fifty Five
onl130 FLAT BACK WASH BASIN
250 a) Providing & fixing white vitreous china flat back wash basin of size
550mm x 400mm with CI brackets painted white with 15mm CP brass
pillar tap and angle valve, CP brass waste coupling with rubber plug,
pattern, 32mm dia CP brass bottle trap & its unions, including cutting &
making good the wall & floor surface/ tiled surface wherever required.
(Item includes removing the old fittings in case of the replacement
without an extra cost.
EACH 2,933 Two Thousand Nine
Hundred and Thirty
Three only
Tenderer's Signature with seal 18
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
19/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
251 b) Providing & fixing coloured vitreous china flat back wash basin of size
550mm x 400mm with CI brackets painted white with 15mm CP brass
pillar tap and angle valve, CP brass waste coupling with rubber plug,
pattern, 32mm dia CP brass bottle trap & its unions, including cutting &
making good the wall & floor surface/ tiled surface wherever required.
(Item includes removing the old fittings in case of the replacementwithout any extra cost.)
EACH 3,236 Three Thousand Two
Hundred and Thirty Six
only
252 131 Supplying & f ixing concealed battery operated electronic f lushing
system of approved make, for urinals including all charges as per the
requirements of IOCL. CERA Cat. No. 6904 or appd. equivalent.
EACH 6,243 Six Thousand Two
Hundred and Forty Three
only
132 Supplying & f ixing the following of approved quality f ittings as per
IOCL's requirements and instructions.
253 a) Providing & fixing CP brass towel rail, of 1.25mm wall thickness pipe &
600mm long
EACH 256 Two Hundred and Fifty
Six only254 b) Providing & fixing CP brass toilet paper holder of appd. make and
quality
EACH 292 Two Hundred and Ninety
Two only
255 c) Providing & fixing CP brass liquid soap container of appd. make &
quality
EACH 348 Three Hundred and Forty
Eight only
256 d) Providing & f ixing white viterous china recessed pattern soap tray of
size 216 x 108mm.
EACH 325 Three Hundred and
Twenty Five only
257 e) Providing & fixing coloured viterous china recessed pattern soap tray of
size 216 x 108mm
EACH 430 Four Hundred and Thirty
only258 f) Providing & fixing 600mm x 450mm and min. 5.5mm thick bevelled
edge mirror of approved make with 6mm thick approved marine ply
backing, CP brass hanging hooks, fixing screws, etc.
EACH 578 Five Hundred and
Seventy Eight only
259 g) Providing & f ixing 15 mm CP brass angle valve of appd. make & quality EACH 520 Five Hundred and
Twenty only
260 h) Providing & f ixing 15 mm CP brass pillar cock of appd. make & quality EACH 541 Five Hundred and Forty
One only
261 i) Providing & fixing 15 mm CP brass concealed stop cock with wall
flange of approved make & quality
EACH 723 Seven Hundred and
Twenty Three only
262 j) Providing & fixing 20 mm CP brass concealed stop cock with wall
flange of approved make & quality
EACH 771 Seven Hundred and
Seventy One only263 k) Providing & fixing 15 mm CP brass long body bib cock of approved
make & quality
EACH 630 Six Hundred and Thirty
only264 l) Providing & f ixing overhead CP adjustable spray shower of approved
make & quality with shower arm.
EACH 416 Four Hundred and
Sixteen only265 133 Providing & fixing ball valve for garden of 15 mm dia of approved make
& quality
EACH 241 Two Hundred and Forty
One only266 134 Supplying & fixing cast iron floor trap (Nahani) of 100mm inlet & 75mm
outlet of self cleansing design with cast iron screwed down or hinged
grating with or without vent arm complete, including cost of cutting and
making good walls & floor surface etc. complete.
EACH 557 Five Hundred and Fifty
Seven only
267 135 Supplying & fixing best qualityPVC floor trap (Multi trap) of 100mm inlet
and 75mm outlet of self cleansing design including cost of cutt ing
making good walls & floor surface.
EACH 230 Two Hundred and Thirty
only
136 Supplying, laying and jointing glazed stoneware pipes grade A with stiff
mixture of cement in the proportion 1:3 over 100 mm CC bed of 1:3:6,
including excavation to the required depth, back fil ling, watering,
consolidation, making necessary connections with fittings, testing of
joints etc. complete
268 a) 100mm dia. RM 364 Three Hundred and Sixty
Four only269 b) 150 mm dia. RM 413 Four Hundred and
Thirteen only270 137 Supplying & fixing SW gully trap of grade "A" complete with CI grating,
brick masonry chamber & water tight CI cover, with frame of 300 x
300mm size (inside) The weight of Cover shall be min. 4.50 Kg and that
of frame 2.70 KG. Item includes required excavation, back filling, PCC,
brickwork, plastering in CM1:4, etc. complete
EACH 1,272 One Thousand Two
Hundred and Seventy
Two only
271 138 Construction of brick masonry inspection chamber/manhole of 600 x
600 x 750mm internal dimension with RCC cover slab 150 mm thick
including necessary excavation, CC 1:4:8, 100mm thick in foundation,
brick masonry, plastering in CM 1:3 on all exposed surfaces and inside
the manhole, with a floating coat of neat cement & making channels in
CC 1:2:4 in bed, complete including curing etc. complete
EACH 3,899 Three Thousand Eight
Hundred and Ninety Nine
only
Tenderer's Signature with seal 19
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
20/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
139 Providing & constructing of septic tank and soak pit as per IOC
standard drawing including inlet and outlet chambers, heavy duty CI
manhole cover, vent pipe etc. complete. Item includes 150mm dia.PVC
pipe (6 kg/cm2) between soak pit and septic tank, excavation, PCC,
brickwork, plastering all other civil works as per drawing etc. complete
272 a) For 50 users LS 94,065 Ninety Four Thousand
and Sixty Five only273 b) For 20 users LS 60,563 Sixty Thousand Five
Hundred and Sixty Three
only140 Supplying and installing of H. D. moulded polyethylene tank, "SINTEX"
or equivalent approved make water storage tank of following capacities
including all fittings like drain plug etc., placing on plain hard surface,
etc. com lete274 a) 500 Litres EACH 2,682 Two Thousand Six
Hundred and Eighty Two
only275 b) 1000 Litres. EACH 5,363 Five Thousand Three
Hundred and Six Three
onl276 c) 2000 Litres. EACH 10,726 Ten Thousand Seven
Hundred and Twenty Six
only141 Providing and fixing stainless steel jali (grating) with or without hole for
waste pipe for floor/Nahini trap277 a) 75mm dia - Weight not less than 70 grams EACH 39 Thirty Nine only
278 b) 100 mm dia - Weight not less than 100 grams EACH 69 Sixty Nine only
142 Providing and fixing plastic moulded jali of required colour and shade
for floor/Nahini trap279 a) Circular type EACH 34 Thirty Four only
280 b) Rectangular with openable circular - lid EACH 39 Thirty Nine only
143 Providing & fixing Brass/GM full way gate valve with CI wheel screwed
ends of IS approved quality.281 a) 15mm dia EACH 477 Four Hundred and
Seventy Seven only
282 b) 20mm dia EACH 640 Six Hundred and Fortyonly
283 c) 25mm dia EACH 995 Nine Hundred and Ninety
Five only284 d) 32mm dia EACH 1,390 One Thousand Three
Hundred and Ninety only
285 e) 40mm dia EACH 1,875 One Thousand Eight
Hundred and Seventy
Five only144 Providing and filling rain water harvesting pits stone aggregates/ ballast
in specified sizes cost and conveyance of all materials, labour charges,
sundries etc. com lete286 a) 40 mm stone aggregates CUM 700 Seven Hundred only
145 WATER SUPPLY, PLUMBING AND SANITARY WORKS FOR PCF
AND SPECIALISED WORKS287 a) Providing & fixing first quality white vitreous china wall hung European
type WC pan (Parryware Cascade or equivalent) with seat cover with all
fittings and fitting with chair brackets / heavy rag bolts with rubber bush
and stainless steel cap, after drilling holes of 20 mm dia and inserting
suitable sleeves etc. complete as per detailed specifications.
EACH 4,391 Four Thousand Three
Hundred and Ninety One
only
288 b) Providing & fixing first quality coloured vitreous china wall hung
European type WC pan (Parryware Cascade or equivalent) with seat
cover with all fittings and fitting with chair brackets / heavy rag bolts
with rubber bush and stainless steel cap, after drilling holes of 20 mm
dia and inserting suitable sleeves etc. complete as per detailed
s ecifications.
EACH 5,686 Five Thousand Six
Hundred and Eighty Six
only
289 c) Providing & fixing first qualitywhite vitreous china Anglo Indian typeWC
pan with seat cover with all fittings as per detailed specifications.
EACH 3,322 Three Thousand Three
Hundred and Twenty
Two only
290 d) Providing & f ixing f irst quality white vitreous china Urinal basin 420 x610 with built in Automatic Flushing Sensor- parrryware with all fittings
as er detailed s ecifications.
EACH 11,569 Eleven Thousand FiveHundred and Sixty Nine
onl
Tenderer's Signature with seal 20
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
21/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
291 e) Providing and fixing at site circular shaped 470 mm dia Off White
coloured wash basin of Hindware/ Parryware make to be fixed in the
Black Granite stone supported on 20 mm thk Kadappah stone slab,
including cutt ing of Necessary hole in the granite stone, CP waste
coupling, nickel plated copper connections, Bottle trap of jaquar make
(catalogue no. 769. - B) / ESS - ESS (cromaseries) / AQUEL makeetccomplete with waste coupling JACQUAR make Catelogue No. 705, but
excluding cost of Tap, angle cocks etc complete. (The wash basin shall
be under counter type. Granite slab, cuddapah stone slab etc. will be
paid for separately.) (No extra payment will be made for cutting opening
in granite slab).
EACH 3,677 Three Thousand Six
Hundred and Seventy
Seven only
292 f) Providing and f ixing at site Jacquar make Pillar cock long neck with
aerator (contnental series) Catalogue No. 021 / ESS-ESS (croma
series) / AQUEL(deleno) make or equivalent make approved by IOCL
be fixed at site including all necessary fittings etc complete.
EACH 787 Senven Hundred and
Eighty Seven only
293 g) Providing & Fixing at site angle cock of Jacquar make ( Continental
Series) Catalogue No.053 / ESS-ESS (croma series) / AQUEL (deleno)
make or equivalent make approved by IOCL, to be fixed below wash
basins and other areas etc complete.
EACH 584 Five Hundred and Eighty
Four only
294 h) Providing and fixing at site Jacquar make Stop cock (Continental
Series) Catalogue No.083 / ESS-ESS (croma series) / AQUEL make orequivalent make approved by IOCL as required.
EACH 950 Nine Hundred and Fifty
only
295 i) Providing and fixing at site bib cock jacquar make (Continental Series)
Catalogue NO.107 / ESS-ESS (croma series) / AQUEL(deleno) make
or equivalent make approved by IOCL to be fixed at stte including all
materials, labour etc complete.
EACH 810 Eight Hundred and Ten
only
296 j) Providing and Fixing Metropole concelled Flush Valve Brass Chrome
finished Plumbing Fitt ings: Make: Jacquar (Continental Series)
Catalogue No.1081A, Ess Ess (Chroma Series), Aquel (deleno), or
equivalent make approved by IOCL.
EACH 1,916 One Thousand Nine
Hundred and Sixteen
only
297 k) Providing & fixing SS / finish Toilet Paper Holder - Jaguar (continental) /
aquel (deleno) or equivalent make approved by IOCL.
EACH 687 Six Hundred and Eighty
Seven only
298 l) Providing & fixing SS / finish rob hook - Jaguar (continental) / aquel
(deleno) or equivalent make approved by IOCL.
EACH 519 Five Hundred and
Nineteen only299 m) Providing & f ixing Liquid Soap Dispenser Colgate Pamolive make or
Eqiuivalent approved by IOCL.
EACH 292 Two Hundred and Ninety
Two only300 n) Providing & f ixing Electrically Operated Hand Drver System on wall
near Wash Basin area of make Technocrat or Equivalent approved by
IOCL.
EACH 6,581 Six Thousand FiveHundred and Eighty One
onlyXXIII PAINTING
301 146 Providing & painting with two coats of cement paint of approved brand
and manufacture on new plastered surface over two coats of white
cement after preparing the surface including necessary scrapping,
cleanin scaffoldin curin etc. com lete.
SQM 48 Forty Eight only
302 147 Providing & painting with two coats cement paint of approved brand and
manufacture on old wall surface after necessary washing, cleaning,
curin etc. com lete
SQM 35 Thirty Five only
303 148 Providing & painting with acrylic distemper two coats on new surfaces
over one coat of cement primer with 2 coats of putty etc. including
necessary scraping, cleaning, scaffolding etc., complete
SQM 87 Eighty Seven only
304 149 Providing & painting one coat Acrylic distemper for the old surfaces
after scrapping and cleaning the existing surface as directed by IOCLincludin scaffoldin etc. com lete.
SQM 16 Sixteen only
305 150 Providing & painting two coats Acrylic distemper for the old surfaces
after scrapping and cleaning the existing surface as directed by IOCL
including scaffolding etc. complete.
SQM 26 Twenty Six only
306 151 Surface preparation, supplying & painting one coat of cement primer
and two coats of wall putty and two coats of interior acrylic emulsion
paint for interior surfaces, as per specifications, and of approved colour
and make, including scraping, scaffolding etc. complete.
SQM 110 One Hundred and ten
only
307 152 Surface preparation, supplying & painting one coat of interior acrylic
emulsion paint for interior surfaces as per specif ications, and of
approved colour and make including scraping & scaffolding etc.
complete.
SQM 31 Thirty One only
308 153 Surface preparation,supplying & painting two coats of interior acrylic
emulsion paint for interior surfaces as per specif ications, and of
approved colour and make including scraping, scaf folding etc.complete.
SQM 48 Forty Eight only
Tenderer's Signature with seal 21
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
22/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
309 154 Surface preparation, supplying & painting one coat of exterior acrylic
emulsion paint for exterior surfaces as per specif ications and of
approved colour and make including scraping, scaf folding etc.
complete.
SQM 39 Thirty Nine only
310 155 Surface preparation, supplying & painting two coat of exterior acrylic
emulsion paint for exterior surfaces as per specif ications and ofapproved colour and make including scraping, scaf folding etc.
complete.
SQM 63 Sixty Three only
311 156 Surface preparation, supplying & painting two coat of exterior acrylic
emulsion paint over one coat of cement primer for exterior surfaces as
per specifications and of approved colour and make including scraping,
scaffolding etc. complete.
SQM 82 Eighty Two only
312 157 Providing and applying priming coat using two coats of white cement
after scrapping and cleaning the surface, using scaffolding, etc.
complete.
SQM 13 Thirteen only
313 158 Providing painting with two coats of synthetic enamel paint over one
coat of cement primer on new plastered surfaces including cost of all
materials, labour, scraping, scaffolding etc., complete.
SQM 58 Fifty Eight only
314 159 Providing painting with one coat of synthetic enamel paint on existing
cement plastered and painted surfaces including cost of all materials,labour, scraping, scaffolding etc., complete.
SQM 25 Twenty Five only
315 160 Providing painting with two coats of synthetic enamel paint on existing
cement plastered and painted surfaces including cost of all materials,
labour, scraping, scaffolding etc., complete
SQM 39 Thirty Nine only
316 161 Providing painting two coats synthetic enamel paint over two coats of
zinc phosphate primer on new steel work including cost of all material,
labour, scraping, scaffolding, etc. complete
SQM 63 Sixty Three only
317 162 Providing painting one coat synthetic enamel paint over one coat of zinc
phosphate primer for old steel surfaces after scrapping and cleaning the
existing surface as directed by IOCL including scaffolding etc.complete
SQM 38 Thirty Eight only
318 163 Providing painting two coats synthetic enamel paint over one coat of
zinc phosphate primer for the old steel surfaces after scrapping and
cleaning the existing surface as directed by IOCL including scaffolding
etc. complete.
SQM 51 Fifty One only
319 164 Providing & painting with two coats of aluminum paint for steel surface
over two coats of zinc phosphate primer after cleaning the old paint, mill
scale, rust, grease, etc. including scraping, scaffolding etc. complete.
SQM 59 Fifty Nine only
320 165 Providing & painting with two coats of aluminum paint for steel surface
over one coat of zinc phosphate primer after cleaning the old paint, mill
scale, rust, grease, etc. including scraping, scaffolding etc. complete.
SQM 47 Forty Seven only
321 166 Surface preparation, providing and applying spray painting with one coat
of metal primer (1litre/10m2), two coats of metal putty (1kg/5m2), one
coat speedkote primer surfacer (1litre/10m2),and two coats of synthetic
enamel paint (1litre/5m2) for canopy / building facia made of MS/Al.
sheet including cost of all machineries, materials, labour, scaffolding
etc., as per specifications and IOC colour scheme.
SQM 232 Two Hundred and Thirty
Two only
322 167 Surface preparation, providing and applying spray painting, two coats ofsynthetic enamel paint (1litre/5m2) for existing canopy / building facia
made of MS/Al. sheet including cost of all machineries, materials,
labour, scaffolding etc., as per specifications and IOC colour scheme.
SQM 121 One Hundred andTwenty One only
323 168 Surface preparation, providing and applying (spray painting), two coats
of polyurethene paint of approved make on MS canopy columns over
necessary coats of ETCH primer, epoxy putty, primer surfacer, etc. as
per manufacturers specifications, including cost of all machineries,
materials, labour, scaffolding etc. as per directions of IOCL.
SQM 432 Four Hundred and Thirty
Two only
324 169 Supplying and applying white lime wash three coats to give an even
shade including mixing specified quantity of gum and indigo to walls,
ceiling etc. (last two coats with brush only), including cost & conveyance
of all materials, labour etc. complete.
SQM 8 Eight only
Tenderer's Signature with seal 22
PDF created with pdfFactory trial version www.pdffactory.com
http://www.pdffactory.com/http://www.pdffactory.com/7/30/2019 Iocl Proce Bid
23/63
ITEM
CODESl.
No.
DESCRIPTION Unit Rate
(Rs.)
RATES IN WORDS
(RUPEES)
170 Writing name of Retail Outlet and location/Indian Oil Corporation
monogram, other sign / slogans on building / glass of show window etc.
of the following heights / diameters with vinyl sticker LG or 3M make of
a roved ualit and shade.325 a) Letter of size upto 5 cms EACH 25 Twenty Five only
326 b) Letter of size above 5 cms & upto 15 cms EACH 40 Forty only327 c) Letter of size above 15 cms & upto 25 cms EACH 160 One Hundred and Sixty
only328 d) Letter of size above 25 cms & upto 70 cms EACH 320 Three Hundred and
Twenty only329 e) Indian Oil Corporation Monogram upto 45 cm dia. EACH 450 Four Hundred and Fifty
only330 171 Lettering NO SMOKING, AIR, WATER, TOILET, FIRST AID, etc.
(Local language / English), as per drawings and as directed by IOCL.
(Measurement will be for each word / set)
EACH 175 One Hundred and
Seventy Five only
172 Painting the following with two coat