Ax - N
Innovación y Tecnología para el Control de FluidosInnovation and Technology for Fluid Control
VálvulasConjuntos y AccesoriosAutomatización y Sistemas de Control
ValvesSets and AccessoriesAutomation and Control Systems
Perfil de la Empresa
Valmec en Argentina
Válvulas Esféricas Bridadas Válvula Esférica Paso Reducido Válvula Esférica de Paso Total Válvula Esférica Doble Guiada Válvula Esférica entre Bridas
Válvulas Esféricas 2 y 3 Partes / Alta PresiónRoscadas y para Soldar
Válvula Esférica Dos Partes Válvula Esférica Tres Partes Válvula Esférica Tres Partes Bronce Válvula Esférica Integral Bronce / InoxidableVálvula Esférica Integral Acero al CarbonoVálvula Esférica Alta Presión Válvulas Esféricas Tres VíasProductos EspecialesAplicaciones Especiales
Válvula Esférica de Tres Vías Productos EspecialesAplicaciones Especiales Válvulas Mariposa
Medios de Operación
Medios de OperaciónActuadores Neumáticos y Operadores de EmergenciaActuadores Eléctricos y Accesorios para AutomatizaciónReductor Sin Fin-Corona
Automatización y Control
Automatización Sistemas de Control
Conjuntos Petroleros y Accesorios
Conjuntos Petroleros AccesoriosUnión Doble a Golpe
Válvulas de Retención
Válvula de Clapeta BridadaVálvula de Clapeta RoscadaVálvula de Clapeta Roscada BS800
Válvulas Esclusas
Válvula Esclusa de Asientos ParalelosVálvula Esclusa BridadaVálvula Esclusa Roscada
Válvulas de Regulación
Válvula Globo Roscada Válvula Globo Bridada
Información Técnica
Información TécnicaTabla de Compatibilidad Química Normas Aplicables
Company Profile
Valmec in Argentina
Flanged Ball Valves
Reduced Bore Flanged Ball Valve Full Bore Flanged Ball Valve Double Trunnion Ball ValveWafer-Style Ball Valve
2 & 3-Pieces / High Pressure Ball Valves Threaded and Welding
2-Pieces Ball Valve 3-Pieces Ball Valve 3-Pieces Bronze Ball ValveIntegral Bronze / Stainless Ball ValveIntegral Carbon Steel Ball ValveHigh Pressure Ball Valve
3-Way Ball ValvesSpecial ProductsSpecial Applications
3-Way Ball ValvesSpecial ProductsSpecial Applications
Butterfly Valves
Operation Drives
Operation DrivesPneumatic Actuators andEmergency OperatorsElectrical Actuators andAccessories for AutomationManual Gear Actuator
Automation and Control
AutomationControl Systems
Oil Sets and Accessories
Oil Sets AccessoriesDouble Blow Union
Check Valves
Flanged Swing Check ValveThreaded Swing Check ValveBS800 Threaded Swing Check Valve Gate Valves
Parallel Seat Gate ValveFlanged Gate Valve Threaded Gate Valve
Control Valves
Threaded Ball ValveFlanged Ball Valve Technical Information
Technical InformationChemical Resistance TableApplicable Standards
IndiceIndex
3
4
7
8 12 1618
21
22 2426283031
33
343638
39
43
444545474647
49
5051
53
54 5556
57
585960
61
6263 64
65
6667
69
707172
Perfil de la Empresa
VALMEC inicia sus actividades en 1977, fabricando y comercializando válvulas esféricas para diversas aplicaciones. Como resultado de la alta calidad de sus productos y un servicio de asistencia técnica post-venta calificado, logra una rápida aceptación de los mercados que le confiere solidez a la marca. Desde el comienzo de sus actividades, VALMEC tiene como objetivo principal brindar a los clientes un producto de excelencia para el control de fluidos, considerando las mejoras conti-nuas, la tecnología de punta y su integración con el personal, como las bases fundamentales de una estructura eficiente, que es el fiel reflejo de la misión y los valores de la organización.
La visión de VALMEC se fundamenta en la innovación tecnológica constante y el desarrollo profesional de su equipo de trabajo, siendo estos los elementos inspiradores para el alcance de nuevas soluciones, seguras y confiables con elevados estándares de calidad. Cada producto es sinónimo de una ordenada política establecida desde un compromiso empresa-rio genuino y la revisión permanente de un Sistema de Gestión de la Calidad que ha logrado la certificación de las Normas de Producto y de Gestión más reconocidas del mundo, abarcando toda la línea de productos y servicios.
Actualmente, VALMEC es un actor importante en el mercado Latinoamericano y local, encon-trándose posicionada entre las líderes del sector, lo cual constituye proyecciones de expan-sión hacia el resto del mundo.
Company Profile
VALMEC started operating in 1977, manufacturing and selling ball valves for various applications. As a result of its high-quality products and a skilled post-sale technical support, it was rapidly accepted in the markets and this strengthened its brand. Since it opened for business, the main goal of VALMEC has been to provide clients with a premium product for fluid control, considering continuous improvements, cutting-edge technology and its integration to the personnel as the foundations of an efficient structure, which accurately reflects the mission and values of the organization. The vision of VALMEC is based on permanent technology innovation and the professional development of its work team, which are the inspiring elements for reaching new, safe and reliable solutions with high quality standards. Each product is synonymous to an orderly policy established based on a true corporate commitment and the permanent revision of a Quality Management System that has reached the world's best known Product and Management Standards, encompassing all the line of products and services.
Currently, VALMEC is a significant player in the Latin American and local market, being positioned as one of the sector leaders, with projections to expand to the rest of the world.
EmpresaCompany
3
Nuestro Sistema de Gestión de la Calidad, ha logra-do la certificación de Normas de Producto y de Gestión más reconocidas del mundo, abarcando toda la línea de Productos y Servicios de Valmec. • Certificación ISO 9001-2015• Certificación ISO 14001 • Certificación API6D• Certificación APIQ1• Certificación ENARGAS / Boreau Veritas Gas Our Quality Management System has achieved the certification of the most recognized Product and Management Standards in the world, covering the whole line of Valmec products and services. • ISO 9001-2015 Certification• ISO 14001 Certification• API6D Certification• APIQ1 Certification• ENARGAS / Boreau Veritas Gas Certification
Presencia en América / Presence in America
Sede CentralHeadquarters
Gestión de la Calidad / Quality Management
ARGENTINA
1977 Nace la empresa con el nombrede MIVAL S.R.L en la ciudad de Caseros, Provincia de Buenos Aires. El plantel inicial era de 4 personas.
The company was born under the name of MIVAL S.R.L. in the city of Caseros, Buenos Aires Province.The initial staff consisted in 4 people.
1985 VALMEC S.A. se traslada a un nuevo centro fabril de 7.200 mts2 ubicado en Tortuguitas, Provincia de Buenos Aires, con un equipamiento de 15 máquinas convencionales.
VALMEC S.A. moves to a new manufacture center of 7.200 mts² located in Tortuguitas, Buenos Aires Province, with an equipment of 15 conventional machines.
1997 Certificación de calidad de la norma ISO 9001. Continúa la incorporación de tecnología CNC con 6 tornos y un centro de mecanizado.
Quality certification of the norm ISO 9001. The acquisition of 6 lathes and a machining center stand out the technology improvement.
1981 En Diciembre de este año, cambia su nombre por VALMEC S.A. y comienza a operar en un predio de 300 mts2 en la ciudad de Villa Ballester, Provincia de Buenos Aires.
In December of this year, the name is changed to VALMEC S.A. and begins to operate in a 300 mts²field located in Villa Ballester, Buenos Aires Province.
4
1992 Se produce la incorporación de los primeros Tornos a Control Numérico (CNC) incrementando la productividad.
The incorporation of the firsts Lathe Numeric Control (CNC) increases the productivity of the company.
2003 El continuo crecimiento, implica la incorporación de 1.100 mts² cubiertos nuevos, ascendiendo así a los 3.850 mts². El área de producción se compone de 20 máquinas entre centros de mecanizado CNC.
Constant growth implies incorporating 1.100 new covered mts², up to 3.850 mts².The Production Area is constituted by 20 machines including lathes and machining centers CNC.
1987Artículos de periódicos y primera publicidad de VALMEC en revistas. VALMEC's newspaper articles and first magazine advertising.
2017
5
Valmec en Argentina Valmec in Argentina
2005 Certificación para válvulas anti-fuego ISO 10497 (API 607/6FA). Se incor-pora el primer multitarea integrex mejorando la productividad y la calidad. Plantel de 45 personas.
Is obtained the certification for fire type valves ISO 10497 (API 607-6FA). The first integrex multitasking is incorporated improving the productivity andthe quality. Staff of 45 people.
2011 Incorporación de Máquina de Medición por Coordenadas (MMC) ubicada en el nuevo laboratorio técnico de metrología.
The incorporation of a Coordinates Measuring Machine (MMC) located on the new metrology technical lab.
2009 La planta industrial incorpora 3.600 mts² nuevos, llegando así a los 10.800 mts² y a los 6.700 mts² cubiertos. El plantel de máquinas se conforma con 34 CNC entre tornos, centros y multitareas.
The industrial plant incorporates new3.600 mts², to reach 10.800 and 6.700 mts². The combination of machines settles for 34 CNC among Lathes, Centers and Multitasking.
2013 Certificación del monograma API 6D Reg. 1417.
Certification of the monogramAPI 6D Reg.1417.
• Ampliación de nave industrial a 8.200 mts².• Certificación ISO 14001 (Medio Ambiente).• Certificación API Q1 (SGC).• Incorporación de máquina rotativa de• unidades operativas en simultáneo para• altísima productividad.• Incorporación de CNC de 4 ejes japonés.• Plantel de 45 máquinas CNC entre Tornos,• Centros de Mecanizado y Multitareas.• Nuevo equipo de ensayo para válvulas• anti-fuego (API 607/ISO 10497). • Expansion of industrial building to 8200 mts².• ISO 14001 Certification (Environment)• API Q1 Certification (QMS)• Incorporation of rotary machine for• machining of simultaneous operative units• for high productivity.• Incorporation of Japanese 4-axis CNC.• Plant of 45 CNC machines between Lathes,• Machining Centers and Multitasking Centers.• New test station for anti-fire valves tests • according with API 607 and ISO 10497.
VALMEC está presente en la cadena de producción de las principales empresas, ofreciendo líneas de productos confiables, con diseños eficientes y seguros, proporcionando al usuario la tranquilidad del control de fluidos en cada proceso.
Ingeniería de Diseño yEficiencia en la Cadena de Valor
VALMEC is present in the production chain of top companies, offering reliable product lines, with efficient and safe designs, providing the user with the peace of mind of fluids control in each process.
Design Engineering and Efficiency in the Value Chain
6
7
Válvulas Esféricas BridadasFlanged Ball Valves
ContenidoVálvula Esférica Bridada Paso ReducidoVálvula Esférica Bridada Paso TotalVálvula Esférica Bridada Doble GuiadaVálvula Esférica entre Bridas
ContentsReduced Bore Flanged Ball Valve Full Bore Flanged Ball Valve Double Trunnion Ball ValveWafer Style Ball Valve
8-9-10-1112-13-14-15
16-1718-19
Válvula Esférica Bridada Paso ReducidoReduced Bore Flanged Ball Valve
8
Características Principales• Vástago inexpulsable.• Sello doble en vástago con tuerca inferior para ajuste.• Esfera flotante / guiada. • En diseño de cuerpo bridado y tapón roscado, se utiliza• un aro metálico de sello entre cuerpo y tapón, que hace• que la presión de ajuste de las tuercas y espárragos entre• las bridas, al montar la válvula en la cañería, no modifique• el torque de operación.• Sistema de palanca firme y robusto, funcional a la exigen-• cia de operación.
Curva de Presión / TemperaturaPressure / Temperature Rating
0 50 100 150 200
110
100
90
80
70
60
50
40
30
20
10
Rangos de Presión y Temperatura ASME B16.34Pressure and Temperature Range ASME B16.34
Características TécnicasTechnical Features
Diametro NominalNominal Diameter
PasajePort
Normas de DiseñoDesign Norms
SeriesClass
ExtremosEnds
Materiales ExternosExternal Materials
Materiales InternosInternal Materials
OperaciónOperation
1¼” a 18”1¼” to 18”
ReducidoReduced
API 6D - ASME B16.34 - ASME B16.5 - ASME B16.10ISO 10497 (API 6FA) - MSS SP6
ASME 150 / 300 / 600
Bridados RF, RJ, FFFlanged RF, RJ, FF
Acero al Carbono, Acero Inoxidable, Bronce Carbon Steel, Stainless Steel, Bronze
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Palanca, Actuador Eléctrico o Neumático (Simple Efecto / Doble Efecto), Reductor a Sin fin y CoronaHandle, Electrical or Pneumatic Actuator (Single,Effect / Double Effect) Manual Gear Operator
Opcionales• Vástago extendido/con extensor según especificación.• Diseño antifuego y/o antiestático.• Palanca con traba candado.• Venteo / Drenaje.• Diseño para vapor según especificación. • Tercer vía (Lateral/Inferior).• Diseño calefaccionado. • Pintura exterior especial según especificación. • Puntos de inyección sellante / engrasador.
Temperatura / Temperature (ºC)
Pre
sión
/ P
ress
ure
(bar
)
300
150
600
Main Features• Blowout-proof stem.• Double stem seal with lower adjusting nut.• Floating / guided ball. • End cap is sealed by a metallic ring which prevents the• adjusting pressure of the nuts and studs between the pipe• flanges from modifying the operation torque.• Solid and robust handle system, suitable for opera-• tion demands.
Opcionals• Extended stem/with extensor to specification.• Fire-safe and/or antistatic design.• Handle with locking device.• Vent / Drain.• Designed for steam service according to specification.• Third way (lateral/lower).• Designed for heating service. • Special exterior painting according to specification.• Sealant injection point/grease nipple.
CUERPO BRIDADO Y TAPÓN ROSCADO/TAPA BRIDADAFLANGED BODY AND THREADED BONNET /FLANGED BONNET
SELLO DOBLE EN VÁSTAGO CON TUERCA INFERIOR PARA AJUSTEDOUBLE STEM SEAL WITHLOWER ADJUSTING NUT
ESFERA FLOTANTE / GUIADA FLOATING / GUIDED BALL
VÁSTAGO INEXPULSABLEBLOWOUT-PROOF STEM
Norma CertificadaCertified Norm
API 6D Reg. 1417
ASTM A216 WCB ASTM A351 CF8 ASTM A351 CF8M
-20 -38
50
100
150
200
250
19.6
19.2
17.7
15.8
13.8
12.1
51.1
50.1
46.6
45.1
43.8
41.9
102.1
100.2
93.2
90.2
87.6
83.9
19
18.3
15.7
14.2
13.2
12.1
49.6
47.8
40.9
37.0
34.5
32.5
99.3
95.6
81.7
74.0
69.0
65.0
19.0
19.2
17.7
15.8
13.8
12.1
51.1
50.1
46.6
45.1
43.8
41.9
102.1
100.2
93.2
90.2
87.6
83.9
150 300 600T (ºC) 150 300 600 150 300 600
Válvula Esférica Bridada Paso ReducidoReduced Bore Flanged Ball Valve
9
Válvula Esférica Bridada Paso ReducidoReduced Bore Flanged Ball Valve
10
Configuración de VálvulaValve Configuration
Ø P
C
E
5 3 1
2
6
7
8
9
10 11 12 13
14
4 15
16
19 2122 B
N
Esfera FlotanteFloating Ball
Esfera Guiada PívotGuided Ball Pivot
Esfera Guiada Gorrón y CojineteGuided Ball Pivot and Bearing
7
Ø P
C
E
135614
2
8
9
15 10 11 11 4 12 13
B
N
Ver capítulo Información Técnica Pag. 70See chapter Technical Information Pag. 70
Extremos Bridados / Flanged Ends
Rayado de Bridas / Flange Facing Finish
Stock Finish Stock Finish
Smooth FinishSmooth Finish
AF / AJ
FF RF RJ
AF / AJ
Ø P
135
2
4
6
7
8
9
17
18
19
20
21
23
B
NC
E
11 13
AF / AJ
Válvula Esférica Bridada Paso ReducidoReduced Bore Flanged Ball Valve
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Cuerpo / Body
Tapón - Tapa / Insert
Esfera / Ball
Vástago / Stem
Asiento Metálico / Metal Seat
Asiento / Seat
O-ring de Tapón / Cap O-ring
O-ring de Vastago / Stem O-ring
Sello de Vastago / Stem Seal
Prensa / Gland
Tuerca de Vastago / Stem Nut
Arandela de Presión / Washer
Palanca / Handle
Sello Metálico / Metal Seal
Tope / Top
Resorte Platillo / Spring Dish
Resorte Helicoidal / Helical Spring
Buje de Vástago / Stem Bushing
Purga / Bleeding
Brida Superior / Upper Flange
Buje Antifricción / Antifriction Bushing
Guía de Esfera / Ball Guide
Soporte Guía de Esfera /Support Ball Guide
CV= Galones de agua por minuto para una caida de presion de 1 psi.R= Valmec S.A. recomienda utilizar reductor sinfin y corona.
ASTM A216 WCB -ASTM A352 LCB/LCC - ASTM A105
ASTM A216 WCB -ASTM A352 LCB/LCC - ASTM A105
ASTM A351 CF8/CF8M - ASTM A105+ENP
ASTM A216 WCB+ENP
ASTM A276/A479 316/304
SAE 1026 - SAE 1020
SAE 1026 - SAE 1020
PTFE-PTFE c/ Carga PTFE+Resina Acetálica-Devlon®-Peek
EPDM - Silicona - Buna - Viton® - Viton® AED
EPDM - Silicona - Buna - Viton® - Viton® AED
PTFE - PTFE c/Carga - Grafito Flexible
SAE 1212 - Acero inoxidable / Stainless Steel
SAE 1040 - Acero inoxidable / Stainless Steel
SAE 1070
SAE 1020
SAE 1070 - Cobre
Tornillo Allen
AISI 420
SAE 1070 - Acero inoxidable / Stainless Steel
SAE 40
AISI 316
ASTM A216 WCB -ASTM A352 LCB/LCC
ASTM A105
PTFE + Bronce + Acero al Carbono
ASTM A276 Gr.316/ Gr.304 - ASTM A479 Gr.316/ Gr.304
ASTM A105
Acero al Carbono / Carbon Steel Acero Inoxidable / Stainless Steel Bronce / Bronze
1¼”
1½”
2”
2½”
3”
4”
6”
8”
10”
12”
14”
16”
18”
ASTM A351 CF8 - ASTM A351 CF8M - Duplex
ASTM A351 CF8/CF8M - Duplex
ASTM A276/A479 316/304
ASTM A351 CF8/CF8M/CF8M+ENP - Duplex
ASTM A564 17-4-PH
ASTM A276/A479 316/304
ASTM A351 CF8/CF8M/CF8M+ENP - Duplex
ASTM A564 17-4-PH - ASTM A276/A479 316/304
ASTM A276/A479 316/304
PTFE-PTFE c/ Carga PTFE+Resina Acetálica-Devlon®-Peek
EPDM - Silicona - Buna - Viton® - Viton® AED
EPDM - Silicona - Buna - Viton® - Viton® AED
PTFE - PTFE c/Carga - Grafito Flexible
AISI 316
AISI 316
AISI 302
Acero inoxidable / Stainless Steel
SAE 1070 - Cobre
Tornillo Allen
AISI 420
AISI 302
SAE 40
AISI 316
ASTM A351 CF8/CF8M - ASTM A276/A479 316/304
PTFE + Bronce + Acero al Carbono
ASTM A276 Gr 316 - ASTM A479 Gr 316
ASTM A276 Gr 316 - ASTM A479 Gr 316
Ø P
25
32
38
50
63
75
101
152
187
203
254
303
334
mm Num G/min
B
115
125
150
180
190
230
280
345
405
485
535
595
635
AF/AJ
140/0-0
165/0-0
178/191
191/203
203/216
229/241
267/279
292/305
330/343
356/368
686/699
762/775
864/876
E
150
200
220
230
290
430
R
R
R
R
R
R
R
N
4x16
4x16
4x19
4x19
4x19
8x19
8x22
8x22
12x25
12x25
12x28
16x28
16x32
Tq
12
17.6
39
45
67
90
240
450
700
1200
700
1200
1940
Cv
46
90
126
209
313
640
1010
1900
3500
6500
16000
25000
31000
3.6
5.7
7
12
17
22
37
77
108
125.8
246
373
560
Kg
C
85
120
120
150
160
190
-
-
-
-
-
-
-
P
-
32
38
50
63
75
101
152
187
203
254
303
-
mm Num G/min
B
-
155
165
190
210
255
320
380
445
520
585
650
-
AF/AJ
-
191/203
216/232
241/257
283/298
305/321
403/419
419/435
457/473
502/518
762/768
838/854
-
E
-
200
220
230
290
430
R
R
R
R
R
R
-
N
-
4x22
8x19
8x22
8x22
8x22
12x22
12x25
16x28
16x32
20x32
20x35
-
Tq
-
24.5
45
60
80
170
370
820
1350
1900
4200
4800
-
Cv
-
90
126
209
313
640
1110
1900
3500
5700
16000
25000
-
-
7
8.8
16
21.5
32.5
67
116.5
180
260
398
486
-
Kg
C
-
120
120
150
160
190
-
-
-
-
-
-
-
300
P
-
-
38
50
63
75
101
152
187
203
254
303
-
mm Num G/min
B
-
-
165
191
190
275
355
420
510
560
605
685
-
AF/AJ
-
-
292/295
330/333
356/359
432/435
559/562
660/664
787/791
838/841
889/892
991/994
-
E
-
-
270
290
290
430
R
R
R
R
R
R
-
N
-
-
8x19
8x22
8x22
8x25
12x28
12x32
16x35
20x35
20x38
20x42
-
Tq
-
-
63.7
79
152
258
659
1500
3800
6000
5100
5600
-
Cv
-
-
126
209
313
640
1010
1900
3600
6200
16000
25000
-
-
-
13.1
21
28.4
50.8
120
220
340
480
580
820
-
Kg
C
-
-
120
150
160
-
-
-
-
-
-
-
-
600
11
150
Ø PesoWeight
PesoWeight
PesoWeight
ASTM B62
ASTM B62 - ASTM B283
ASTM B62 - ASTM B283
ASTM B62 - ASTM B283
ASTM B62 - ASTM B283
PTFE-PTFE c/ Carga PTFE+Resina Acetálica-Devlon®-Peek
EPDM - Silicona - Buna - Viton® - Viton® AED
EPDM - Silicona - Buna - Viton® - Viton® AED
PTFE - PTFE c/Carga - Grafito Flexible
AISI 316
AISI 316
AISI 302
SAE 1020 - Acero inoxidable / Stainless Steel
SAE 1070 - Cobre
Tornillo Allen
AISI 420
AISI 302
SAE 40
AISI 316
ASTM B62 - ASTM B283
PTFE + Bronce + Acero al Carbono
ASTM A276 Gr 316 - ASTM A479 Gr 316
ASTM A276 Gr 316 - ASTM A479 Gr 316
CV= Flow rate in gallons per minute with 1 psi pressure drop.R= Valmec S.A. recommends with manual gear actuator.
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes principales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
Válvula Esférica Bridada Paso TotalFull Bore Flanged Ball Valve
12
13
Válvula Esférica Bridada Paso TotalFull Bore Flanged Ball Valve
Características Principales• Vástago inexpulsable.• Sello doble en vástago con tuerca inferior para ajuste.• Esfera flotante / guiada.• De ½” a 2½” también diseñadas en cuerpo bridado y• tapón roscado.• Sistema de palanca firme y robusto, funcional a la exigen-• cia de operación.
Norma CertificadaCertified Norm
API 6D Reg. 1417
Características TécnicasTechnical Features
Diametro NominalNominal Diameter
PasajePort
Normas de DiseñoDesign Norms
SeriesClass
ExtremosEnds
Materiales ExternosExternal Materials
Materiales InternosInternal Materials
OperaciónOperation
½” a 16”½” to 16”
TotalFull Bore
API 6D - ASME B16.34 - ASME B16.5 - ASME B16.10ISO 10497 (API 6FA) - MSS SP6
ASME 150 / 300 / 600
Bridados RF, RJ, FFFlanged RF, RJ, FF
Acero al Carbono, Acero Inoxidable, Bronce Carbon Steel, Stainless Steel, Bronze
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Palanca, Actuador Eléctrico o Neumático (Simple Efecto / Doble Efecto), Reductor a Sin fin y CoronaHandle, Electrical or Pneumatic Actuator (Single,Effect / Double Effect) Manual Gear Operator
Curva de Presión / TemperaturaPressure / Temperature Rating
0 50 100 150 200
110
100
90
80
70
60
50
40
30
20
10
Temperatura / Temperature (ºC)
Pre
sión
/ P
ress
ure
(bar
)
300
150
600
Opcionales• Vástago extendido/con extensor según especificación.• Diseño antifuego y/o antiestático.• Palanca con traba candado.• Venteo / Drenaje.• Diseño para vapor según especificación. • Pintura exterior especial según especificación. • Puntos de inyección sellante / engrasador.
Main Features• Blowout-proof stem.• Double stem seal with lower adjusting nut.• Floating/guided ball.• To ½” a 2½” also designed for flanged body construction • with threaded end cap. • Solid and robust handle system, suitable for opera-• tion demands.
Optionals• Extended stem/with extensor according to specification.• Fire-safe and/or antistatic design.• Handle with locking device.• Vent / Drain.• Designed for steam service according to specification.• Special exterior painting according to specification. • Sealant injection point/grease nipple.
SELLO DOBLE EN VÁSTAGO CON TUERCA INFERIOR PARA AJUSTEDOUBLE STEM SEAL WITHLOWER ADJUSTING NUT
ESFERA FLOTANTE / GUIADA FLOATING / GUIDED BALL
VÁSTAGO INEXPULSABLEBLOWOUT-PROOF STEM
Rangos de Presión y Temperatura ASME B16.34Pressure and Temperature Range ASME B16.34
ASTM A216 WCB ASTM A351 CF8 ASTM A351 CF8M
-20 -38
50
100
150
200
250
19.6
19.2
17.7
15.8
13.8
12.1
51.1
50.1
46.6
45.1
43.8
41.9
102.1
100.2
93.2
90.2
87.6
83.9
19
18.3
15.7
14.2
13.2
12.1
49.6
47.8
40.9
37.0
34.5
32.5
99.3
95.6
81.7
74.0
69.0
65.0
19.0
19.2
17.7
15.8
13.8
12.1
51.1
50.1
46.6
45.1
43.8
41.9
102.1
100.2
93.2
90.2
87.6
83.9
150 300 600T (ºC) 150 300 600 150 300 600
CUERPO BRIDADO Y TAPÓN ROSCADO/TAPA BRIDADAFLANGED BODY AND THREADED BONNET /FLANGED BONNET
Válvula Esférica Bridada Paso TotalFull Bore Flanged Ball Valve
14
Configuración de VálvulaValve Configuration
Esfera Guiada PívotGuided Ball Pivot
Esfera Guiada Gorrón y CojineteGuided Ball Pivot and Bearing
C
15
E
1
2
3
12
5
6
7
8
11
9
16
13
14
4
10
AF / AJ
Ø P
B
DN
Ver capítulo Información Técnica Pag. 70See chapter Technical Information Pag. 70
Extremos Bridados / Flanged Ends
Rayado de Bridas / Flange Facing Finish
Stock Finish Stock Finish
Smooth FinishSmooth Finish
FF RF RJ
Esfera FlotanteFloating Ball
2
1113
20 23 B
N
Ø P
C
E
5 136
7
8
9 10
14
16
17
124 15
AF / AJ
Ø P
135
2
4
6
7
8
9
18
19
20
21
22
24
B
N
13
14
C
E
11 1516
AF / AJ
Válvula Esférica Bridada Paso TotalFull Bore Flanged Ball Valve
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Cuerpo / Body
Tapa - Tapón / Insert
Esfera / Ball
Vástago / Stem
Asiento Metálico / Metal Seat
Asiento / Seat
O-ring de Tapa / Cap O-ring
O-ring de Vastago / Stem O-ring
Sello de Vastago / Stem Seal
Prensa / Gland
Tuerca de Vastago / Stem Nut
Arandela de Presión / Washer
Tuerca / Nut
Espárrago / Stud Bolt
Palanca / Handle
Tope / Top
Resorte Platillo / Spring Dish
Resorte Helicoidal / Helical Spring
Buje de Vástago / Stem Bushing
Purga / Bleeding
Brida Superior / Upper Flange
Buje Antifricción / Antifriction Bushing
Guía de Esfera / Ball Guide
Soporte Guía de Esfera /Support Ball Guide
ASTM A216 WCB -ASTM A352 LCB/LCC - ASTM A105
ASTM A216 WCB -ASTM A352 LCB/LCC
ASTM A105
ASTM A351 CF8/CF8M - ASTM A105+ENP
ASTM A216 WCB+ENP
ASTM A276/A479 316/304
SAE 1026 - SAE 1020
SAE 1026 - SAE 1020
PTFE-PTFE c/ Carga PTFE+Resina Acetálica-Devlon®-Peek
EPDM - Silicona - Buna - Viton® - Viton® AED
EPDM - Silicona - Buna - Viton® - Viton® AED
PTFE - PTFE c/Carga - Grafito Flexible
SAE 1212 - Acero inoxidable / Stainless Steel
SAE 1040 - Acero inoxidable / Stainless Steel
SAE 1070
ASTM A194 2H
ASTM A193 B7
SAE 1020
Tornillo Allen
AISI 420
SAE 1070 - Acero inoxidable / Stainless Steel
SAE 40
AISI 316
ASTM A216 WCB -ASTM A352 LCB/LCC - ASTM A105
PTFE + Bronce + Acero al Carbono
ASTM A276 Gr 316 / Gr 304 - ASTM A479 Gr 316 / 304
ASTM A105
Acero al Carbono / Carbon Steel Acero Inoxidable / Stainless Steel Bronce / Bronze
ASTM A351 CF8 - ASTM A351 CF8M - Duplex
ASTM A351 CF8/CF8M - Duplex
ASTM A276/A479 316/304
ASTM A351 CF8/CF8M/CF8M+ENP - Duplex
ASTM A564 17-4-PH - ASTM A276/A479 316/304
ASTM A351 CF8/CF8M/CF8M+ENP - Duplex
ASTM A564 17-4-PH - ASTM A276/A479 316/304
ASTM A276/A479 316/304
PTFE-PTFE c/ Carga PTFE+Resina Acetálica-Devlon®-Peek
EPDM - Silicona - Buna - Viton® - Viton® AED
EPDM - Silicona - Buna - Viton® - Viton® AED
PTFE - PTFE c/Carga - Grafito Flexible
AISI 316
AISI 316
AISI 302
ASTM A194 2H - ASTM A194 8M
ASTM A193 B7 - ASTM A193 B8M
SAE 1020 - Acero inoxidable / Stainless Steel
Tornillo Allen
AISI 420
AISI 302
SAE 40
AISI 316
ASTM A351 CF8/CF8M - ASTM A276/A479 316/304
PTFE + Bronce + Acero al Carbono
ASTM A276 Gr 316 - ASTM A479 Gr 316
ASTM A276 Gr 316 - ASTM A479 Gr 316
15
ASTM B62
ASTM B62 - ASTM B283
ASTM B62 - ASTM B283
ASTM B62 - ASTM B283
ASTM B62 - ASTM B283
PTFE-PTFE c/ Carga PTFE+Resina Acetálica-Devlon®-Peek
EPDM - Silicona - Buna - Viton® - Viton® AED
EPDM - Silicona - Buna - Viton® - Viton® AED
PTFE - PTFE c/Carga - Grafito Flexible
AISI 316
AISI 316
AISI 302
ASTM A194 2H
ASTM A193 B7
SAE 1020 - Acero inoxidable / Stainless Steel
Tornillo Allen
AISI 420
AISI 302
SAE 40
AISI 316
ASTM B62 - ASTM B283
PTFE + Bronce + Acero al Carbono
ASTM A276 Gr 316 - ASTM A479 Gr 316
ASTM A276 Gr 316 - ASTM A479 Gr 316
½”
¾”
1”
1¼”
1½”
2”
2½”
3”
4”
6”
8”
10”
12”
14”
16”
Ø P
14
19
25
32
38
50
63
75
101
152
203
254
303
334
385
mm Num G/min
B
90
100
110
115
125
150
180
190
230
280
345
405
485
535
595
AF/AJ
108/0-0
117/0-0
127/0-0
140/0-0
165/0-0
178/191
191/203
203/216
229/241
394/406
457/470
533/546
610/622
686/699
762/775
E
120
120
150
150
220
230
290
430
430
R
R
R
R
R
R
N
4x16
4x16
4x16
4x16
4x16
4x19
4x19
4x19
8x19
8x22
8x22
12x25
12x25
12x28
16x28
Tq
5.8
6.9
12.4
23.5
28.4
44
64.6
83.3
247
430
635
1240
1720
1980
2460
Cv
15
50
95
130
245
440
700
1000
2100
5500
9800
16000
24000
34000
46000
1.5
1.8
2.5
3.6
6
11
14.5
20
37
81
128
196
320
380
530
Kg
C
50
55
87
110
115
147
155
190
220
-
-
-
-
-
-
P
14
19
25
32
38
50
63
75
101
152
203
254
303
334
385
mm Num G/min
B
95
115
125
135
155
165
190
210
255
320
380
445
520
585
650
AF/AJ
140/152
152/165
165/178
178/0-0
191/203
216/232
241/257
283/298
305/321
403/419
502/518
568/584
648/664
762/778
838/854
E
120
150
150
220
270
290
290
430
R
R
R
R
R
R
R
N
4x16
4x19
4x19
4x19
4x22
8x19
8x22
8x22
8x22
12x22
12x25
16x28
16x32
20x32
20x35
Tq
8.2
12
19
30
38
68
99
170
390
800
1300
1800
2210
3190
3970
Cv
15
50
95
130
245
440
700
1000
2100
5500
9800
16000
24000
34000
46000
2.1
2.65
3.1
5.6
10.6
12.1
17
26
56.2
104
176
330
430
510
712
Kg
C
50
55
87
110
115
147
155
190
-
-
-
-
-
-
-
300P
14
19
25
32
38
50
63
75
101
152
203
254
303
334
385
mm Num G/min
B
95
115
125
135
155
165
190
210
275
355
420
510
560
605
685
AF/AJ
165/163
191/191
216/216
229/229
241/241
292/295
330/333
356/359
432/435
559/562
660/664
787/791
838/841
889/892
991/994
E
150
150
150
220
230
290
290
530
R
R
R
R
R
R
R
N
4x22
4x19
4x19
4x19
4x22
8x19
8x22
8x22
8x25
12x28
12x32
16x35
20x35
20x38
20x42
Tq
9.7
15
33
49
63
88
161
177
680
1310
1760
4400
5400
5750
7200
Cv
15
50
95
130
245
440
700
1000
2100
5500
9800
16000
24000
34000
46000
2.8
3.3
3.75
7.5
16
21
25.3
38
70
148
236
527
788
940
1320
Kg
C
65
80
85
120
134
146
146
195
-
-
-
-
-
-
-
600150Ø Peso
WeightPeso
WeightPeso
Weight
CV= Galones de agua por minuto para una caida de presion de 1 psi.CV= Flow rate in gallons per minute with 1 psi pressure drop.
R= Valmec S.A. recomienda utilizar reductor sinfin y corona.R= Valmec S.A. recommends with manual gear actuator.
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes principales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
Válvula Esférica Bridada Doble GuiadaDouble Trunnion Flanged Ball Valve
• Características Principales• Cuerpo central y dos tapas abulonadas.• La esfera junto con el vástago y la guía conforman una • sola pieza contenida por rodamientos, otorgando robus- • tez y seguridad en la operación de la válvula con una bajo • torque de accionamiento hasta 4” PT y 6” PR.• Sello doble en vástago con tuerca inferior para ajuste.• Esta válvula está diseñada especialmente para fluidos de • alta presión y principalmente con sólidos en suspensión.• Mantenimiento accesible, especialmente con fluidos de • partículas disueltas, mediante la extracción de las tapas • de torre y guía sin desmontar la válvula.
280
260
240
220
200
180
160
140
120
100
80
Temperatura / Temperature (ºC)
Pre
sión
/ P
ress
ure
(bar
)
900
600
1500
Opcionales• Vástago extendido según especificación.• Diseño antifuego y/o antiestático.• Palanca con traba candado.• Válvula de venteo y drenaje.• Diseño para vapor según especificación. • Pintura exterior especial según especificación.
CUERPO CENTRAL YDOS TAPAS ABULONADASCENTRAL BODY AND TWO BOLTED CAPS
SELLO DOBLE EN VÁSTAGO CON TUERCA INFERIOR PARA AJUSTEDOUBLE STEM SEAL WITH LOWER ADJUSTING NUT
VÁSTAGO, ESFERA Y GUÍA CONFORMAN UNA SOLA PIEZASTEM, BALL AND GUIDE FORM A SINGLE PIECE
RODAMIENTO SUPERIOR E INFERIORUPPER AND LOWER BEARING
Norma CertificadaCertified Norm
API 6D Reg. 1417
Características TécnicasTechnical Features
Diametro NominalNominal Diameter
PasajePort
Normas de DiseñoDesign Norms
SeriesClass
ExtremosEnds
Materiales Materials
OperaciónOperation
½” a 6”½” to 6”
Reducido - TotalReduced - Full Bore
API 6D - ASME B16.34 - ASME B16.5 - ASME B16.10 ASME B1.20.1 - BS 21 - MSS SP6
ASME 600 / 900 / 1500
Roscados: NPT, BSPT, BSP / Para soldar: SW - BWBridados: RF, RJ, FFThreaded: NPT, BSPT, BSP / Welding: SW - BWFlanged: RF, RJ, FF
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Palanca, Actuador Eléctrico o Neumático (Simple Efecto / Doble Efecto), Reductor a Sin fin y CoronaHandle, Electrical or Pneumatic Actuator (Single,Effect / Double Effect) Manual Gear Operator
Curva de Presión / TemperaturaPressure / Temperature Rating
0 50 100 150 200
Diseño TrunnionEl diseño "Trunnion" y la acción de los rodamientos, posibilita que el torque de operación no se modifique significativamente por la presión del fluido. Tampoco los asientos son afectados por la fuerza de apoyo que ejerce la esfera, asegu-rando una estanqueidad eficiente y constante en ambos sentidos. Trunnion Design"Trunnion" design and bearings avoid significant modification of operation torque by fluid pressure, as well as damage to the seats caused by the support force exerted by the ball, ensuring efficient and continuous tightness in both directions.
Main Features• Central body and two bolted caps.• Ball, stem and guide form a single piece held by bearings, • providing robustness and safety of operation, with low • operation torque until 4” reduced bore and 6” full bore.• Double stem seal with lower adjusting nut.• This valve is specially designed for high pressure fluids, • especially with suspended solids.• Easy access for maintenance, especially with dissolved • particles fluids, by removing caps and guide without • disassembling the valve.
Optionals• Extended stem according to specification.• Fire-safe and/or antistatic design.• Handle with locking device.• Vent and drain valve.• Designed for steam service according to specification.• Special exterior painting according to specification.
16
RESORTES DEL PORTA ASIENTOSEAT HOLDER SPRINGS
Válvula Esférica Bridada Doble GuiadaDouble Trunnion Flanged Ball Valve
17
CV= Galones de agua por minuto para una caida de presion de 1 psi.CV= Flow rate in gallons per minute with 1 psi pressure drop.
#150
½”
1”
1½”
2”
2½”
3”
4”
6”
Ø
13
24
38
50
63.5
75
100
-
Paso Total Serie 900 / Full Bore Series 900
El torque (Tq) corresponde a la presión diferencial nominal.Torque corresponds to the nominal differencial pressure.
Ø P
mm
Paso Reducido Serie 900 / Reduced Bore Series 900
AF AJ AR B C N Tq CvE PesoWeight
Num G/min
Kg
Bridada Roscada
Ø P AF AJ AR B C N Tq CvE PesoWeight
Num G/min
Kg
Bridada Roscada
Paso Total Serie 1500 / Full Bore Series 1500 Paso Reducido Serie 1500 / Reduced Bore Series 1500
225
254
305
368
419
381
457
-
225
254
308
371
422
384
460
-
105
112
230
268
277
317
-
-
120
150
180
215
245
240
290
-
88.5
115
221
160
180
230
260
-
160
200
430
550
640
R
R
-
4x19
4x22
4x25
8x22
8x25
8x22
8x28
-
9
32
95
130
190
410
860
-
15
95
245
440
700
1000
2100
-
7.7
15
31
51
65
88
135
-
2.1
4
21
33
60
68
116
-
-
-
24
38
50
63.5
75
100
-
-
254
305
368
419
381
457
-
-
254
308
371
422
384
460
-
-
112
230
268
277
317
-
-
-
150
180
215
245
240
290
-
-
115
221
160
180
230
260
-
-
200
430
550
640
R
R
-
-
4x25
8x22
8x25
8x22
8x28
12x28
-
-
32
95
130
190
410
860
-
-
95
245
440
700
1000
2100
-
-
15
31
51
65
88
135
-
-
4
21
33
60
68
116
½”
1”
1½”
2”
2½”
3”
4”
6”
13
24
38
50
63.5
75
100
-
225
254
305
368
419
381
457
-
225
254
308
371
422
473
549
-
105
112
230
268
277
-
-
-
120
150
180
215
245
265
310
-
89
115
200
160
180
230
260
-
160
200
430
550
640
R
R
-
4x19
4x22
4x25
8x22
8x25
8x28
8x32
-
9
32
108
190
315
630
1500
-
15
95
245
440
700
1000
2100
-
7.7
15
31
51
73
110
165
-
2.1
4
21
33
64
98
147
-
-
-
24
38
50
63.5
75
100
-
-
305
368
419
470
546
705
-
-
308
371
422
473
549
711
-
-
230
268
277
-
-
-
-
-
150
180
215
245
265
310
-
-
115
200
160
180
230
260
-
-
200
430
550
640
R
R
-
-
4x25
8x22
8x25
8x28
8x32
12x35
-
-
32
108
190
315
630
1500
-
-
95
245
440
700
1000
2100
-
-
15
31
51
73
110
165
-
-
4
21
33
64
98
147
Ø
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Cuerpo / Body
Tapa / Body Connector
Tapas Porta Rodamientos / End Pieces Bearing
Vástago / Stem
Esfera Doble Guiada / Trunnion Ball
Porta Asiento Metálico / Metal Seat
Asiento Metalico / Metal Seal
Asiento / Seat
Resorte de Asiento / Spring Seal
Rodamiento de Guía / Trunnion Bearing
Buje Porta O-ring / O-ring Bushing
Sellos O-ring / O´ring Seals
Arandela Seeger / Seeger Ring
Tuerca y Espárrago de Cuerpo / Body Nut & Stud
Palanca / Lever
ASTM A216 WCB -ASTM A352 LCB/LCC - ASTM A105
ASTM A216 WCB -ASTM A352 LCB/LCC - ASTM A105
ASTM A216 WCB -ASTM A352 LCB/LCC - ASTM A105
ASTM A351 CF8/CF8M - ASTM A105+ENP
ASTM A216 WCB+ENP - ASTM A276/A479 316/304
ASTM A276/A479 316/304 - Duplex - ASTM A564 17-4PH
SAE1026 -SAE1020 - ASTM A582 416
Devlon® - Delrin®
SAE 1070
Estándar Fabricante
SAE 1026 - SAE 1020
Nitrilo - EPDM - Viton® - Silicona
SAE 1070
ASTM A194 Gr 2H / ASTM A194 Gr B7
SAE 1010
Acero al Carbono / Carbon Steel Acero Inoxidable / Stainless Steel
ASTM A351 CF8/CF8M - Duplex
ASTM A351 CF8/CF8M - Duplex - ASTM A276/A479 316/304
ASTM A351 CF8/CF8M - Duplex - ASTM A276/A479 316/304
ASTM A351 CF8/CF8M - Duplex - ASTM A564 17-4PH
ASTM A351 CF8M+ENP - ASTM A276/A479 316
ASTM A276/A479 316/304 - Duplex
ASTM A564 17-4PH - ASTM A582 416
Devlon® - Delrin®
AISI 302
Estándar Fabricante
ASTM A276/A479 316/304
Nitrilo - EPDM - Viton® - Silicona
AISI 302
ASTM A194 Gr 8M / ASTM A193 Gr B8M
SAE 1010
14
13
3 412
9
13
116
12
3
1110
1
2
7
15
PRESIÓN ABSORBIDA POR RODAMIENTOSPRESSURE ABSORBEDBY BEARINGS
PRESIÓN EJERCIDA POR EL FLUIDOPRESSURE OFTHE FLUID
FLUIDOFLUID
CONJUNTO BRIDADE TORRESTEM COVER
CONJUNTO BRIDADE GUÍATRUNNION COVER
LIMPIEZA INTERIORINNER CLEANING
Ventajas del Diseño TrunnionTrunnion Design Advantages
8
5
AF / AJ / AR
Ø P
E
C
B
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes principales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
Válvula Esférica entre BridasWafer-Style Ball Valve
Características Principales• Diseño novedoso construido en un solo cuerpo.• Vástago inexpulsable.• Sello doble en vástago con tuerca inferior para ajuste.• Esfera flotante.• Esta válvula permite su montaje entre dos bridas estándar •las cuales van abulonadas entre sí.• Requerimiento mínimo de espacio debido a su menor •longitud y peso con respecto a una válvula bridada de •paso reducido. • Se pueden utilizar para el control de la mayoría de los flui- •dos dentro de las limitaciones de presión y temperatura.• Menor costo y posibilidad de cumplir con la misma función •que las series ANSI.
0 50 100 150 200
120
110
100
80
70
60
50
40
30
20
10
Opcionales• Vástago extendido según especificación.• Diseño antifuego y/o antiestático.• Palanca con traba candado.• Diseño para vapor según especificación.
Temperatura / Temperature (ºC)
Pre
sión
/ P
ress
ure
(bar
)
300
150
Características TécnicasTechnical Features
Diametro NominalNominal Diameter
PasajePort
SeriesClass
Materiales ExternosExternal Materials
Materiales InternosInternal Materials
OperaciónOperation
2”, 3“ y 4”2”, 3” and 4”
ReducidoReduced
ASME 150 / 300
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Palanca, Actuador Eléctrico o Neumático (Simple Efecto / Doble Efecto)Handle, Electrical or Pneumatic Actuator (Single,Effect / Double Effect)
18
Curva de Presión / TemperaturaPressure / Temperature Rating
Main Features• Innovative one-piece design.• Blowout-proof stem.• Double stem seal with lower adjusting nut.• Floating ball.• Valve can be mounted between two bolted standard •flanges.• Minimum space requirement due to shorter and lighter •design compared to a reduced bore flanged valve.• Valve can be used for control of most fluids within •pressure and temperature limits.• Lower cost and possibility of serving the same purpose •as ANSI series.
Optionals• Extended stem according to specification.• Fire-safe and/or antistatic design.• Handle with locking device.• Designed for steam service according to specification.
ESFERA FLOTANTEFLOATING BALL
DISEÑO NOVEDOSO CONSTRUIDO EN UN SOLO CUERPO.INNOVATIVE ONE-PIECE DESIGN
SELLO DOBLE EN VÁSTAGO CON TUERCA INFERIOR PARA AJUSTEDOUBLE STEM SEAL WITHLOWER ADJUSTING NUT
VÁSTAGO INEXPULSABLEBLOWOUT-PROOF STEM
Rangos de Presión y Temperatura ASME B16.34Pressure and Temperature Range ASME B16.34
ASTM A216 WCB ASTM A351 CF8 ASTM A351 CF8M
-20 -38
50
100
150
200
250
19.6
19.2
17.7
15.8
13.8
12.1
51.1
50.1
46.6
45.1
43.8
41.9
102.1
100.2
93.2
90.2
87.6
83.9
19
18.3
15.7
14.2
13.2
12.1
49.6
47.8
40.9
37.0
34.5
32.5
99.3
95.6
81.7
74.0
69.0
65.0
19.0
19.2
17.7
15.8
13.8
12.1
51.1
50.1
46.6
45.1
43.8
41.9
102.1
100.2
93.2
90.2
87.6
83.9
150 300 600T (ºC) 150 300 600 150 300 600
Válvula Esférica entre BridasWafer-Style Ball Valve
CV= Galones de agua por minuto para una caida de presion de 1 psi.CV= Flow rate in gallons per minute with 1 psi pressure drop.
#150
2”
3”
4”
mm Nxm Kg
150
38
50.8
63.5
mm
13
Parte / Part
1
2
3
4
5
6
7
8
9
10
11
12
13
Cuerpo / Body
Sello de Cuerpo / Body Seal
Tapón / End Piece
Vástago / Stem
Esfera / Ball
Asiento / Seat
Sello de Vástago / Stem Seal
Prensa / Stem Seal Follower
Arandela Belleville / Belleville Washer
Tuerca / Nut
Tuerca / Nut
Palanca / Handle
O-ring de Vástago / Stem O-ring
ASTM A216 WCB
Nitrilo - EPDM - Viton® - Grafito Flexible
ASTM A216 WCB
ASTM A582 T416 - ASTM A276 Gr 316 / 304
ASTM A351 CF8/CF8M - ASTM 276/A479 316/304
PTFE - PTFE con Carga / PTFE or Reinforced PTFE
EPDM - Silicona - Buna - Viton®
SAE 1212 - Acero inoxidable / Stainless Steel
SAE 1070
SAE 1040 - Acero inoxidable / Stainless Steel
SAE 1040 - Acero inoxidable / Stainless Steel
SAE 1020
EPDM - Silicona - Nitrilo 90 AED - Viton® AED
Acero al Carbono / Carbon Steel Acero Inoxidable / Stainless Steel
ASTM A351 CF8M / CF8
Nitrilo - EPDM - Viton® - Grafito Flexible
ASTM A351 CF8M / CF8
ASTM A582 416 - ASTM A276/A479 316/304
ASTM A351 CF8/CF8M - ASTM 276/A479 316/304
PTFE - PTFE con Carga / PTFE - Reinforced PTFE
EPDM - Silicona - Buna - Viton®
AISI 316
AISI 302
AISI 316
AISI 316
SAE 1020 - Acero inoxidable / Stainless Steel
EPDM - Silicona - Nitrilo 90 AED - Viton® AED
82.1
114.3
147.6
101
133
170
90
160
190
TorqueNxm
185
280
280
60
100
140
126
313
640
Cv(1)
PesoWeight
Kg
A B C D
3.5
6.8
12
5/8”
5/8”
5/8”
Øe Ne
4
4
8
300
38
50.8
63.5
mm
82.1
114.3
147.6
107.9
145
177.8
TorqueNxm
185
280
280
120
190
270
126
313
640
Cv(1)
PesoWeight
Kg
A B C D
3.8
7.1
12.8
Øe Ne
8
8
8
100
175
200
5/8”
3/4”
3/4”
Ø P P
Componentes PrincipalesMain Components
8
4
91011
12
7
1356
C
D
AB
19
Ø
Øe= Diámetro de Espárragos.Øe= Bolts Diameter.
Ne= Número de Espárragos.Ne= Bolts Number.
Ø P
Aplicación de Válvula Esférica entre Bridas• La válvula esférica para colocar entre bridas • ofrece un novedoso criterio ya que la misma • va insertada entre dos bridas estándar y • estas abulonadas entre sí.• El requerimiento de espacio es mínimo ya• que su peso es aproximandamente un 50%• menos que el de una válvula esférica común.• Diseño compacto, brinda bajo costo y espa- • cio de instalación reducido.
Wafer-Style Ball Valve Application• The wafer-style ball valve offers an innovative • design: it is inserted between two standard • flanges bolted to each other.• It has minimum space requirement, • because its weight is 50% less than• common ball valves.• The compact design provides low cost and• reduced installation space.
Esquema de InstalaciónInstallation Scheme
VÁLVULA ESFÉRICA ENTRE BRIDASWAFER STYLE BALL VALVE
TUBERÍAPIPING
BULONES Y TUERCASBOLTS AND NUTS
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes principales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
2
Tecnología de punta y un plantel altamente capacitado permiten minimizar al máximo los tiempos de configuración de máquina y reducir la cantidad de etapas de mecani-zado, optimizando al máximo la productividad y obteniendo como resultado piezas con una excelente alineación y terminación superficial.
Área de Mecanizado con innovación tecnológica permanente
Cutting edge technology and highly trained personnel allow minimizing to the fullest the machine setting times and reducing the number of machining stages, thus optimizing productivity and obtaining as a result parts with excellent alignment and surface finish.
Machining Area with permanenttechnology innovation
20
21
Válvulas Esféricas 2 y 3 Partes / Alta PresiónRoscadas y para Soldar2 & 3-Pieces / High Pressure Ball ValvesThreaded and Welding
ContenidoVálvula Esférica Dos Partes Válvula Esférica Tres Partes Válvula Esférica Tres Partes Forjada Bronce Válvula Esférica Integral Bronce / InoxidableVálvula Esférica Integral Acero al CarbonoVálvula Esférica de Alta Presión
Contents2-Pieces Ball Valve 3-Pieces Ball Valve 3-Pieces Forged Bronze Ball ValveIntegral Bronze / Stainless Ball ValveIntegral Carbon Steel Ball ValveHigh Pressure Ball Valve
22-2324-2526-2728-29
3031-32
Válvula Esférica de Dos Partes 2-Pieces Ball Valve
Características Principales• Cuerpo y tapa unidos mediante espárragos y tuercas. • Vástago inexpulsable.• Sello doble en vástago con tuerca inferior para ajuste.• Esfera flotante / guiada. • Para fluidos con temperaturas por encima de los 80°C • los asientos de polímero en contención metálica permiten • una altísima performance de la válvula triplicando la vida • útil con respecto a otras válvulas.
Opcionales• Vástago extendido según especificación.• Diseño antifuego y/o antiestático.• Palanca con traba candado.• Diseño para vapor según especificación.• Tercer vía (Lateral/Inferior).
CUERPO Y TAPA UNIDOS MEDIANTE ESPÁRRAGOS Y TUERCASBODY AND CAP JOINED WITH STUDS AND NUTS
Características TécnicasTechnical Features
Diametro NominalNominal Diameter
PasajePort
Normas de DiseñoDesign Norms
SeriesClass
ExtremosEnds
Materiales ExternosExternal Materials
Materiales InternosInternal Materials
OperaciónOperation
1½” a 3”1½” to 3”
Reducido - TotalReduced Bore - Full Bore
ASME B16.34 - ASME B1.20.1 - BS 21 - BS 5351
ASME 900 / 1500
Roscados NPT, BSPT, BSP, API LP Threaded NPT, BSPT, BSP, API LP
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Palanca, Actuador Eléctrico o Neumático (Simple Efecto / Doble Efecto), Reductor a Sin fin y CoronaHandle, Electrical or Pneumatic Actuator (Single,Effect / Double Effect) Manual Gear Operator
22
SELLO DOBLE EN VÁSTAGO CON TUERCA INFERIOR PARA AJUSTEDOUBLE STEM SEAL WITH LOWER ADJUSTING NUT
ESFERA FLOTANTE / GUIADA FLOATING/GUIDED BALL
VÁSTAGO INEXPULSABLEBLOWOUT-PROOF STEM
Main Features• Body and cap joined with studs and nuts. • Blowout-proof stem.• Double stem seal with lower adjusting nut.• Floating/guided ball. • For fluids at temperatures above 80°C, polymer seats in • metallic containment allow for extremely high performance • of the valve, with a service life three times longer than • other valves.
Opcionals• Extended stem according to specification.• Fire-safe and/or antistatic design.• Handle with locking device.• Designed for steam service according to specification. • Third way (lateral/lower).
Rangos de Presión y Temperatura ASME B16.34Pressure and Temperature Range ASME B16.34
ASME 900 - 2100 psi ASME 1500 - 3600 psi
35
50
100
150
200
2119
1834
995
412
71
149
129
70
29
5
3626
3128
1706
711
114
255
220
120
50
8
psi bar psi
Temp(ºC)
bar
Presión de Trabajo
Curva de Presión / TemperaturaPressure / Temperature Rating
280
260
240
220
200
180
160
140
120
100
80
Temperatura / Temperature (ºC)
Pre
sión
/ P
ress
ure
(bar
)
900
1500
Curva de Presión / TemperaturaPressure / Temperature Rating
0 50 100 150 200
Válvula Esférica de Dos Partes 2-Pieces Ball Valve
23
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Cuerpo / Body
Tapa / Body Connector
Esfera / Ball
Vástago / Stem
Asiento Metalico / Metal Seat
Asiento / Seat
Guia / Guide
Tapa Guia / Guide Connector
Sello Vastago / Stem Seal
Sello de O-ring / O-ring Seal
Prensa / Gland
Arandela Belleville / Belleville Washer
Tuerca de Vastago / Stem Nut
Buje Antifriccion / Antifriction Bushing
Palanca / Lever
Espárrago de Cuerpo / Body Stud
Tuerca Cuerpo / Body Nut
Tornillo de Tapa Guía / Guide Top Bolt
ASTM A105
ASTM A105
ASTM A479 Gr. 316/ 304 - ASTM A276 Gr. 316/ 304 - ASTM A582 Gr 416
ASTM A479 Gr. 316/ 304 - ASTM A276 Gr. 316/ 304 - ASTM A582 Gr 416
SAE 1020/ 1026 - ASTM A479 Gr. 316/ 304 - ASTM A276 Gr. 316/ 304
PTFE con Carga - PTFE + Resina Acetalica - Devlon®
ASTM A479 Gr. 316/ 304 - ASTM A276 Gr. 316/304
ASTM A105
PTFE - PTFE con Carga - Grafito Flexible
EPDM - Silicona - Buna - Viton® - Viton® AED
SAE 1212 - Acero inoxidable / Stainless Steel
SAE 1070
SAE 1040 - Acero inoxidable / Stainless Steel
PTFE + Bronce + Acero al Carbono
SAE 1020
ASTM A193 B7
ASTM A194 2H
Tornillo Allen
Acero al Carbono / Carbon Steel Acero Inoxidable / Stainless Steel
ASTM A479 Gr. 316 / ASTM A276 Gr. 316 / 304
ASTM A479 Gr. 316 / ASTM A276 Gr. 316 / 304
ASTM A479 Gr. 316/ 304 - ASTM A276 Gr. 316/ 304 - ASTM 564 17-4PH
ASTM A276 Gr 316/ 304/ ASTM A479 GR 316/304 - ASTM 564 17-4PH
ASTM A276 Gr 316/ 304/ ASTM A479 GR 316/304
PTFE con Carga - PTFE + Resina Acetalica - Devlon®
ASTM A479 Gr. 316/ 304 - ASTM A276 Gr. 316/304 - ASTM 564 17-4PH
ASTM A479 Gr. 316 / ASTM A276 Gr. 316
PTFE - PTFE con Carga - Grafito Flexible
EPDM - Silicona - Buna - Viton® - Viton® AED
AISI 316
AISI 302
AISI 316
PTFE + Bronce + Acero al Carbono
SAE 1020 - Acero inoxidable / Stainless Steel
ASTM A193 B7 - ASTM A193 B8M
ASTM A194 2H - ASTM A194 8M
Tornillo Allen
#150
1½”
2”
2½”
2½”
3”
mm Nxm G/min Kg
Paso Total / Full BoreØ P
38
50
63
63
-
mm Nxm
A
129
155
218
218
-
C
136
152.5
201
201
-
D
114
140
164
164
-
Tq
95
130
190
190
-
Kg
B
230
230
510
510
-
G/min
Cv
245
440
700
700
-
Peso
6.3
13
29.7
29.7
-
DiámetroDiameter
Paso Reducido / Reduced BoreØ P
-
38
50
-
63
mm Nxm
A
-
129
155
-
198
C
-
152.5
152.5
-
201
D
-
140
140
-
164
Tq
-
95
130
-
190
Kg
B
-
230
230
-
510
G/min
Cv
-
245
440
-
700
Peso
-
6.3
13
-
29.7
CV= Galones de agua por minuto para una caida de presion de 1 psi.CV= Flow rate in gallons per minute with 1 psi pressure drop.
El torque (Tq) corresponde a la presión diferencial nominal.Torque corresponds to the nominal differencial pressure.
Ø P
A
14
10
16
17
18
6
5
7
10
8
B
9
10
9
1
15C
D
4
13
13
12113
10
2
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes principales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
Válvula Esférica de Tres Partes3-Pieces Ball Valve
Características Principales• Cuerpo y tapas abulonados entre sí. • Esfera flotante/guiada y vástago inexpulsable.• Sello doble en vástago con tuerca inferior para ajuste.• La válvula puede desarmarse en tres partes permitiendo: • A. No desmontar los extremos para poder reemplazar los • A. internos ubicados en el cuerpo central. • B. Soldar los extremos protegiendo los materiales polimé- • B. ricos al estar alejados del calor que genera el proceso • B. de soldadura. • Para fluidos con temperaturas por encima de los 80°C • los asientos de polímero en contención metálica permiten • una altísima performance de la válvula triplicando la vida • útil con respecto a otras válvulas.
0 35 50 100 150 200
180
160
140
120
110
100
80
60
40
20
10
Temperatura / Temperature (ºC)
Pre
sión
/ P
ress
ure
(bar
)
Opcionales• Vástago extendido.• Diseño antifuego y/o antiestático.• Palanca con traba candado.• Diseño para vapor según especificación. • Tercer vía (Lateral/Inferior).• Extremos extendidos para soldar.
2000 psi
580 psi
Características TécnicasTechnical Features
Diametro NominalNominal Diameter
PasajePort
Normas de DiseñoDesign Norms
SeriesClass
ExtremosEnds
Materiales ExternosExternal Materials
Materiales InternosInternal Materials
OperaciónOperation
¼” a 6”¼” to 6”
Reducido - TotalReduced - Full Bore
BS 5351 - BS 800 - ASME B1.20.1 - BS 21
580 PSI - STD 1000 PSI - BS800 2000 PSI
Roscados NPT, BSPT, BSP, API LP / Para soldar SW, BW Extendidos para soldar SW, BWThreaded NPT, BSPT, BSP, API LP / Welding SW, BW Extended for Welding SW, BW
Acero al Carbono, Acero Inoxidable, BronceCarbon Steel, Stainless Steel, Bronze
Acero Inoxidable, BronceStainless Steel, Bronze
Palanca, Actuador Eléctrico o Neumático (Simple Efecto / Doble Efecto).Handle, Electrical or Pneumatic Actuator (Single Effect / Double Effect).
Curva de Presión / TemperaturaPressure / Temperature Rating
24
CUERPO Y TAPA ABULONADOS ENTRE SIBOLTED CAPS AND BODY
SELLO DOBLE EN VÁSTAGO CON TUERCA INFERIOR PARA AJUSTEDOUBLE STEM SEAL WITH LOWER ADJUSTING NUT
ESFERA FLOTANTE/GUIADAFLOATING/GUIDED BALL
VÁSTAGO INEXPULSABLEBLOWOUT-PROOF STEM
Main Features• Bolted caps and body.• Floating/guided ball and blowout-proof stem. • Double stem seal with lower adjusting nut.• Valve can be disassembled in three parts, allowing you: • A. Not to remove the ends in order to replace internal • A. parts located in the central body. • B. To weld the ends protecting polymer materials by • B. keeping them away from the heat generated by the • B. welding process. • For fluids at temperatures above 80°C, polymer seats in • metallic containment allow for extremely high performance • of the valve, with a service life three times longer than • other valves.
Opcionals• Extended stem.• Fire-resistant and/or antistatic design.• Handle with locking device.• Designed for steam service according to specification.• Third way (lateral/lower).• Extended welding ends.
Rangos de Presión y Temperatura ASME B16.34Pressure and Temperature Range ASME B16.34
2 1/2” a 4” PT / 3” a 6” PR 1/4” a 2” PT / 3/4” a 2 1/2” PR 1/4” a 2 1/2” PT / 3/4” a 3” PR
35
50
100
150
200
580
493
261
101
14.5
40
34
18
7
1
1015
870
478
188
29
70
60
33
13
2
2000
1740
942
391
58
138
120
65
27
4
40 bar - 580 psiT (ºC) 70 bar - 1000 psi BS800 - 2000 psi
psi bar psi bar psi bar
1000 psi
Paso Total (580 PSI) / Full Bore (580 PSI)
Válvula Esférica de Tres Partes3-Pieces Ball Valve
Extremo SW / BW End
CV= Galones de agua por minuto para una caida de presion de 1 psi.
#150
¼” ”
½”
¾”
1”
1¼”
1½”
2”
2½”
3”
Ø
¼” ”
½”
¾”
1”
1¼”
1½”
2”
2½”
Ø
2½”
3”
4”
6”
mm Nxm G/min Kg
Paso Total BS800 (2000 PSI) / Full Bore BS800 (2000 PSI)Ø P
14
14
19
24
32
38
50
63
-
14
14
19
24
-
38
50
-
64
75
100
-
mm Nxm
A
88
88
94
98
124
132
155
218
-
80
80
81
93
-
132
155
-
184
210
248
-
C
64
64
70
108
132
132
148
201
-
53
53
55
69
-
132
148
-
155
155
190
-
D
63
63
75
85
111
111
140
164
-
56
56
63
75
-
111
140
-
161
197
231
-
Tq
7.8
8.8
11
27
36
48
72
190
-
7.8
8.8
11
27
-
48
72
-
105
210
421
-
Kg
B
140
140
140
160
160
230
230
510
-
120
120
120
155
-
230
230
-
280
500
500
-
G/min
Cv
9
15
50
95
130
245
440
700
-
9
15
50
95
-
245
440
-
700
1000
2100
-
Peso
1.2
1.2
1.8
2.7
4.8
6.6
13
30
-
1
1
1.3
2.1
-
6.6
13
-
13
21
38
-
DiámetroDiameter
Paso Reducido BS800 (2000 PSI) / Reduced Bore BS800 (2000 PSI)Ø P
-
-
14
19
24
32
38
50
63
-
-
14
19
24
32
38
50
-
63.5
75
100
mm Nxm
A
-
-
88
94
98
98
132
155
218
-
-
80
81
93
98
132
155
-
182
210
248
C
-
-
63.5
70
108
132
132
147.5
201
-
-
53
55
69
132
132
147.5
-
155
155
190
D
-
-
63
75
85
111
111
140
164
-
-
56
63
75
111
111
140
-
161
197
231
Tq
-
-
9.8
11
21
27
48
69
190
-
-
9.8
11
21
27
48
69
-
98
198
385
Kg
B
-
-
140
140
160
230
230
280
510
-
-
120
120
155
230
230
280
-
280
500
500
G/min
Cv
-
-
15
32
46
90
245
209
700
-
-
15
32
46
90
245
209
-
313
640
1010
Peso
-
-
1.2
1.8
2.7
4.8
6.6
13
29.7
-
-
1
1.3
2.1
4.8
6.6
13
-
12
20
42
jHF
G
25
Componentes PrincipalesMain Components
Parte / Part
1-2
3-4
5
6
7
8
9
10
11
12
13-14
15
16
17
Cuerpo / Body - Tapa / Body Connector
Esfera / Ball - Vástago / Stem
Aro Metalico / Metal Ring
Porta Asiento Metálico / Metal Seat
Asiento / Seat
Arandela de Vástago / Stem Washer
O-ring de Vástago / O-ring Stem
Prensa / Gland
Arandela Belleville / Belleville Washer
Tuerca de Vástago / Stem Nut
O-ring / O-ring
Bulón de Cuerpo / Body Stud
Tuerca de Cuerpo / Body Nut
Palanca / Lever
ASTM A105 / ASTM A216 WCB
ASTM A479 Tipo 316/304 - ASTM A276 Tipo 316/304 - ASTM A582 Gr 416
ASTM A105
ASTM A105
PTFE - PTFE-R - Devlon® - Delrin®
PTFE - PTFE-R - Grafito Flexible
Nitrilo - EPDM - Viton® - AED - Silicona
SAE 1212
SAE 1070
SAE 1040
Nitrilo - EPDM - Viton® - AED - Silicona
ASTM A193 Gr B7
ASTM A194 Gr 2H
SAE 1010
Acero al Carbono / Carbon Steel Acero Inoxidable / Stainless Steel
ASTM A479 Tipo 316 / ASTM A351 CF8 - CF8M
ASTM A479 Tipo 316/304 - ASTM A276 Tipo 316/304 - ASTM 564 17-4PH
ASTM A479 Tipo 316/304 - ASTM A276 Tipo 316/304
ASTM A479 Tipo 316/304 - ASTM A276 Tipo 316/304
PTFE - PTFE-R - Devlon® - Delrin®
PTFE - PTFE-R - Grafito Flexible
Nitrilo - EPDM - Viton® - AED - Silicona
AISI 316
AISI 301
ASTM A479 Tipo 316/304 - ASTM A276 Tipo 316/304
Nitrilo - EPDM - Viton® - AED - Silicona
ASTM A193 Gr B7 + Zincado / ASTM A193 Gr B8M
ASTM A194 Gr 2H + Zincado / ASTM A194 Gr 8M
SAE 1010
Extremo BW / BW End
Ver dimensiones en página 66.See dimensions on page 66.
Ø P
A
10
D
8
9
8
12 12 411
14
6
7
17
C
B
15 16 2 1 3 2 5 13
Paso Total (1000 PSI) / Full Bore (1000 PSI) Paso Reducido (1000 PSI) / Reduced Bore (1000 PSI)
CV= Flow rate in gallons per minute with 1 psi pressure drop.
Paso Reducido (580 PSI) / Reduced Bore (580 PSI)
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes principales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
Válvula Esférica de Tres Partes Bronce3-Pieces Bronze Ball Valve
Características Principales• Cuerpo y tapas abulonados entre sí. • Vástago inexpulsable y esfera flotante. • Sello doble en vástago con tuerca inferior para ajuste.• La válvula puede desarmarse en tres partes permitiendo • no desmontar los extremos para poder reemplazar los • internos ubicados en el cuerpo central.• Para fluidos con temperaturas por encima de los 80°C • los asientos de polímero en contención metálica permiten • una altísima performance de la válvula triplicando la vida • útil con respecto a otras válvulas.• Forjadas hasta 2½” PR.
0 50 100 150 200
110
100
90
80
70
60
50
40
30
20
10
Temperatura / Temperature (ºC)
Pre
sión
/ P
ress
ure
(bar
)
Opcionales• Vástago extendido.• Diseño antiestático.• Palanca con traba candado.• Diseño para vapor según especificación. • Tercer vía (Lateral/Inferior).
1000 psi
Curva de Presión / TemperaturaPressure / Temperature Rating
26
CUERPO Y TAPA ABULONADOS ENTRE SIBOLTED CAPS AND BODY
SELLO DOBLE EN VÁSTAGO CON TUERCA INFERIOR PARA AJUSTEDOUBLE STEM SEAL WITH LOWER ADJUSTING NUT
ESFERA FLOTANTE FLOATING BALL
VÁSTAGO INEXPULSABLEBLOWOUT-PROOF STEM
Main Features• Bolted caps and body.• Blowout-proof stem and floating ball. • Double stem seal with lower adjusting nut.• Valve can be disassembled in three parts, allowing you • not to remove the ends in order to replace internal • parts located in the central body.• For fluids at temperatures above 80°C, polymer seats in • metallic containment allow for extremely high performance • of the valve, with a service life three times longer than • other valves.• Forged to 2½” reduced bore.
Opcionals• Extended stem.• Antistatic design.• Palanca con traba candado.• Designed for steam service according to specification.• Third way (lateral/lower).
Rangos de Presión y Temperatura ASME B16.34Pressure and Temperature Range ASME B16.34
35
50
100
150
200
70
60
33
13
2
995
856
462
190
30
bar
Temp(ºC)
psi
70 bar - 1000 psi
Presión de Trabajo
Características TécnicasTechnical Features
Diametro NominalNominal Diameter
PasajePort
Normas de DiseñoDesign Norms
SeriesClass
ExtremosEnds
Materiales ExternosExternal Materials
Materiales InternosInternal Materials
OperaciónOperation
¼” a 6”¼” to 6”
Reducido - TotalReduced - Full Bore
BS 5351 - ASME B1.20.1 - BS 21
31 a 70 Bar
Roscados NPT - BSPT - BSP Threaded NPT - BSPT - BSP
Bronce Bronze
Acero Inoxidable, Bronce Stainless Steel, Bronze
Palanca, Actuador Eléctrico o Neumático (Simple Efecto / Doble Efecto)Handle, Electrical or Pneumatic Actuator (Single,Effect / Double Effect)
Válvula Esférica de Tres Partes Bronce3-Pieces Bronze Ball Valve
CV= Galones de agua por minuto para una caida de presion de 1 psi.CV= Flow rate in gallons per minute with 1 psi pressure drop.
27
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Cuerpo / Body
Tapa / Body Connector
Esfera / Ball
Vástago / Stem
Aro Metalico / Metal Ring
Porta Asiento Metálico / Metal Seat
Asiento / Seat
Sello de Vástago / O-ring Stem
O-ring de Vástago / O-ring Stem
Prensa / Gland
Arandela Belleville / Belleville Washer
Tuerca de Vástago / Stem Nut
O-ring Asiento / Seal O-ring
O-ring Cuerpo / Body O-ring
Bulón de Cuerpo / Body Stud
Tuerca de Cuerpo / Body Nut
Palanca / Lever
ASTM B283 / ASTM B62
ASTM B283 / ASTM B62
AISI 316 / 304 / 416 - ASTM B283
AISI 316 / 304 / 416 - ASTM B283
ASTM A479 Tipo 316 / 304 - ASTM A276 Tipo 316 / 304 - SAE 1020/1026
ASTM A479 Tipo 316 / 304 - ASTM A276 Tipo 316 / 304 - SAE 1020/1026
PTFE-R / PTFE
PTFE - PTFE c/Carga
Nitrile - EPDM - Viton®
SAE 1212 - Acero Inoxidable / Stainless Steel
SAE 1070 - Acero Inoxidable / Stainless Steel
SAE 1040 - Acero Inoxidable / Stainless Steel
Buna - EPDM
Buna - EPDM
SAE 4140 Gr 8.8
SAE 4140 Gr 8.8
SAE 1010 - Acero Inoxidable / Stainless Steel
Bronce / Bronce
#150
¼”
¾”
½”
¾”
1”
1¼”
1½”
2”
2½”
3”
4”
6”
mm Nxm G/min Kg
Paso Total / Full BoreØ P
14
14
14
19
25
32
38
50
63.5
76.2
101.4
-
mm Nxm
A
81
81
81
92
98
124
138
148
184
210
248
-
C
45
45
58
63
80
100
110
130
155
155
190
-
D
37
37
50
59
69
81
92
112
161
197
231
-
Tq
7.85
7.85
8.8
10.8
26.5
36.3
48
71.6
105
210
420.5
-
Kg
B
100
100
120
120
150
175
190
280
280
500
500
-
G/min
Cv
9
9
15
50
95
130
245
440
700
1000
2100
-
Peso
1.2
1.2
1.2
1.8
2.7
4.8
6.6
13
12.5
21.7
37.7
-
DiámetroDiameter
Paso Reducido / Reduced BoreØ P
-
-
-
14
19
25
32
38
50
63.5
76.2
101.4
mm Nxm
A
-
-
-
81
94
96
124
142
152
182
210
248
C
-
-
-
58
63
80
100
110
130
155
155
190
D
-
-
-
50
59
69
81
92
110
161
197
231
Tq
-
-
-
9.8
10.8
20.6
26.5
47
69
98.2
197.7
385.3
Kg
B
-
-
-
120
120
150
175
190
280
280
500
500
G/min
Cv
-
-
-
15
32
46
90
126
209
313
640
1010
Peso
-
-
-
1.2
1.8
2.7
4.8
6.6
13
11.95
19.9
42
D
Ø P
A
B
C
11 12 12 4 17
10
8
9
5
2 6 7 1 3 14 13 16 15
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes principales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
Válvula Esférica Integral Bronce / InoxidableIntegral Bronze / Stainless Steel Ball Valve
Características Principales• Cuerpo y tapón roscados y sellados.• Vástago inexpulsable.• Cuerpo y Tapón de Bronce, forjados hasta 4” PT.• Sello doble en vástago con tuerca inferior para ajuste.• Bajo costo de adquisición y máximos beneficios.• Modelo de bronce de 1/2" a 2" aprobado por BVG • (Boreau Veritas Gas) y ENARGAS (Ente Nacional Regula- • dor del Gas de Argentina) para ser usada en redes de •baja presión.
Curva de Presión / TemperaturaPressure / Temperature Rating
0 50 100 150 200
40
36
32
28
24
20
16
12
8
4
0
Temperatura / Temperature (ºC)
Pre
sión
/ P
ress
ure
(bar
)
Opcionales• Vástago extendido.• Diseño antiestático.• Diseño para vapor según especificación.
Diametro NominalNominal Diameter
PasajePort
Normas de DiseñoDesign Norms
ExtremosEnds
Materiales ExternosExternal Materials
Materiales InternosInternal Materials
OperaciónOperation
¼” a 4” Bronce - ½” a 2” Acero Inoxidable¼” to 4” Bronze - ½” a 2” Stainless Steel
Reducido - TotalReduced - Full Bore
BS 5351 - ASME B1.20.1 - BS 21 - NAG 212
Roscados NPT - BSPT - BSP Threaded NPT - BSPT - BSP
Acero Inoxidable, Bronce Stainless Steel, Bronze
Acero Inoxidable, Bronce Stainless Steel, Bronze
PalancaHandle
Main Features• Sealed and threaded body and cap.• Blowout-proof stem.• Bronze body and end cap, forged up yo 4” PT.• Double stem seal with lower adjusting nut.• Low purchase cost and maximum benefits.• Bronze model approved by BVG (Boreau Veritas Gas) • and ENARGAS (Argentina Gas Regulatory Body) for • low pressure piping.
28
Rangos de Presión y Temperatura ASME B16.34Pressure and Temperature Range ASME B16.34
Aprobada ENARGASApprobed ENARGAS
35
50
100
150
200
4
2
-
-
-
35
29
16
7
2
bar
Temp(ºC)
Bronce - Acero Inoxidable / Inox - InoxBronze - Stainless Steel (SS) / SS - SS
AprobadaApproved
ENARGASBVG
4 bar
35 bar
35 bar
Aprobada ENARGAS Approbed ENARGAS
Bronce - Acero InoxidableBronze - Stainless Steel
Acero Inoxidable - Acero InoxidableStainless Steel - Stainless Steel
4 bar57 psi
35 bar500 psi
35 bar500 psi
CUERPO Y TAPÓN ROSCADOS Y SELLADOSSEALED AND THREADED BODY AND CAP
SELLO DOBLE EN VÁSTAGO CON TUERCA INFERIOR PARA AJUSTEDOUBLE STEM SEAL WITH LOWER ADJUSTING NUT
VÁSTAGO INEXPULSABLEANTI-BLOWOUT STEM
ReferenciasReferences
VÁLVULA ESFÉRICA INTEGRAL MICROFUNDIDAACERO INOXIDABLE - ACERO INOXIDABLE 35 BAR / 500 PSIINTEGRAL MICRO CASTING BALL VALVESTAINLESS STEEL - STAINLESS STEEL35 BAR / 500 PSI
bar
Optionals• Extended stem.• Fire-safe and/or antistatic design.• Designed for steam service according to specification.Características Técnicas
Technical Features
Válvula Esférica Integral Bronce / InoxidableIntegral Bronze / Stainless Steel Ball Valve
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
10
11
Cuerpo / Body
Tapón / Body Connector
Esfera / Ball
Asientos / Seats
Vástago / Stem
Sello de Vástago / Stem Seal
Sello O-ring de Vástago / Stem O-ring Seal
Prensa Metálico / Metal Gland
Tuerca Inferior / Stem Nut
Tuerca Superior / Stem Nut
Palanca / Handle
Bronce - Acero Inoxidable / Bronze - Stainless Steel
ASTM A351 CF8M - Bronce / Bronze
Bronce - Acero Inoxidable / Bronze - Stainless Steel
PTFE - PTFE con Carga / PTFE - Reinforced PTFE
Bronce - Acero Inoxidable / Bronze - Stainless Steel
PTFE - PTFE con Carga / PTFE - Reinforced PTFE
BUNA - EPDM
SAE 1010 / 1025
SAE 1040
SAE 1040
SAE 1010
Materiales / Materials
CV= Galones de agua por minuto para una caida de presion de 1 psi.CV= Flow rate in gallons per minute with 1 psi pressure drop.
#150
¼”
¾”
½”
¾” R
¾”
1”
1¼”
1½”
2” R
2”
2½”
3” R
3”
4” R
4”
mm Nxm G/min Kg
DiámetroSize
PPasajeBoremm
11
11
12.5
16
19
25.4
32
38
38
51
63.5
63.5
74
76.5
96
44
48
55
60
66
78
98
106
121
124
137
167
168
191
193
36
36
45
45
53
70
70
85
95
95
120
130
160
160
186
102
102
115
115
115
138
160
205
205
235
235
235
235
295
390
2.5
2.5
2.5
6
6.5
10
18.5
19.5
22.5
45
85
100
120
170
245
9
9
15
35
50
95
130
245
126
440
700
313
620
640
2300
172
150
250
500
650
930
1850
1950
2250
4500
5800
6000
9000
11200
14600
El torque (Tq) corresponde a la presión diferencial nominal.Torque corresponds to the nominal differencial pressure.
Amm
Bmm
Cmm
TorqueNxm
CvGal/min
PesoWeight
g
29
Ventajas de las Válvulas de Dos Partes• El diseño contempla un tope entre el cuerpo• y tapón, lo que asegura que la instalación• de la válvula no modifique el torque de • accionamiento.• El diseño en dos partes, permite que la esfera • tenga un diámetro de pasaje igual al de la• cañería, pudiendo obtener la válvula en paso • total de ½” a 4”.• Roscas cónicas en ambos extremos.• Los dos asientos de la válvula sellan, esto• permite que la válvula sea bidireccional. Este• diseño posibilita cargar las válvulas neumá-• ticamente para prueba final antes del despa-• cho de las mismas.
Advantages of Two-Piece Valves• The design provides for a top between the• body and the end cap, which assures the• installation of the valve does not modify• the operation torque.• The two-part design allows the ball to have • the same bore diameter as the pipeline, so• that the valve can have a full bore of ½” to 4.• Tapered threads can be used at both • body ends.• Both valve seats seal, which means that it is • a two-way valve. These systems provide re-• liable closure, and allow loading valves pneu-• matically for final testing before shipping them.
Ø P
B
5
C
11
2
7
A
10986
6
3
4
1
TAPÓN ROSCADOTHREADED BODY CONNECTOR
CUERPO ROSCADOTHREADED BODY
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes principales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
Válvula Esférica Integral Acero al CarbonoIntegral Carbon Steel Ball Valve
Características Principales• Cuerpo y tapón roscados y sellados. • Sello doble en vástago con tuerca inferior para ajuste.• Para fluidos con temperaturas por encima de los 80°C • los asientos de polímero en contención metálica permiten • una altísima performance de la válvula triplicando la vida • útil con respecto a otras válvulas.• Cuerpo y Tapón forjados en ASTM A105.
Main Features• Threaded and sealed body and cap. • Double stem seal with lower adjusting nut.• For fluids at temperatures above 80°C, polymer seats with • metallic support allow for extremely high performance • of the valve, with a service life three times longer than • other valves.• ASTM A105 forged body and cap.
30
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Cuerpo / Body
Tapón / Insert
Esfera / Ball
Porta Asiento Metálico / Metal Seat Carrier
Asiento / Seat
Vástago / Stem
Arandela de Vástago / Stem Washer
Sello de Vastago / Stem Seal
Prensa / Gland
Arandela Belleville / Belleville Washer
Tuerca de Vástago / Stem Nut
Sello de Asiento / Seat Seal
Sello de Cuerpo / Body Seal
Palanca / Handle
Tope / Top
ASTM A105
ASTM A105
ASTM A479 316/304 - ASTM A276 316/304 - ASTM A582 Gr. 416
ASTM A479 316/304 - ASTM A276 316/304 - SAE1020/1026
PTFE - PTFE con Carga / Reinforced PTFE
ASTM A479 316/304 - ASTM A276 316/304 - ASTM A582 Gr. 416
PTFE - PTFE con Carga / PTFE - Reinforced PTFE
Nitrilo - Viton® - EPDM
SAE 1212
SAE 1070
SAE 1040
Nitrilo - Viton® - EPDM
Nitrilo - Viton® - EPDM
SAE 1010
SAE 1212
Acero al Carbono / Carbon Steel
Características TécnicasTechnical Features
Diametro NominalNominal Diameter
PasajePort
Normas de DiseñoDesign Norms
ExtremosEnds
Materiales ExternosExternal Materials
Materiales InternosInternal Materials
OperaciónOperation
¼” a 2”¼” to 2”
Reducido - TotalReduced - Full Bore
BS 5351 - ASME B1.20.1 - BS 21
Roscados NPT - BSPT - BSP Threaded NPT - BSPT - BSP
Acero al CarbonoCarbon Steel
Acero InoxidableStainless Steel
PalancaHandle
0 50 100 150 200
180
160
140
120
110
100
80
60
40
20
10
Temperatura / Temperature (ºC)
Pre
sión
/ P
ress
ure
(bar
)
2000 psi
1000 psi
Curva de Presión / TemperaturaPressure / Temperature Rating
Opcionales• Vástago extendido según especificación.• Diseño antiestático.
Optionals• Extended stem according to specification.• Fire-safe and/or antistatic design.
7 9 10 11 6
15 14
813
342
5
12
1
CUERPO Y TAPÓN ROSCADOS Y SELLADOSSEALED AND THREADED BODY AND CAP
SELLO DOBLE EN VÁSTAGO CON TUERCA INFERIOR PARA AJUSTEDOUBLE STEM SEAL WITH LOWER ADJUSTING NUT
VÁSTAGO INEXPULSABLEANTI-BLOWOUT STEM
CUERPO Y TAPÓN FORJADOS EN ASTM A105ASTM A105 FORGED BODY AND CAP
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes prin-cipales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
31
CUERPO CENTRAL Y DOS TAPONES ROSCADOS CENTRAL BODY AND TWO THREADED CAPS
Válvula Esférica para Alta PresiónHigh Pressure Ball Valve
Características Principales• El diseño sólido y eficiente de esta válvula se encuentra• validado por las exigencias de los ensayos específicos• que aseguran la estanqueidad del producto de alta presión.• Ensayos de acuerdo a las Normas API 6D, API 598 y • ASME B16.34 con presiones de 621 Bar para la serie• ASME 2500 y 372 Bar para la serie ASME 1500. • El diseño particular de los asientos con Delrin® propor-• ciona mayor confiabilidad y durabilidad durante todas las• operaciones de apertura y cierre.• La palanca reforzada permite una altísima frecuencia de• operación asegurando un torque constante y una estan-• queidad evitando posibles pérdidas por el vástago.
Curva de Presión / TemperaturaPressure / Temperature Rating
-20 0 20 40 60 80 100 120 140 160 180 200
550
500
450
400
350
300
250
200
150
100
50
Rangos de Presión y Temperatura ASME B16.34Pressure and Temperature Range ASME B16.34
1500 2500
35
50
100
150
200
255
220
120
50
8
3697.5
3190
1740
725
116 Temperatura / Temperature (ºC)
Pre
sión
/ P
ress
ure
(bar
)
425.5
360
200
80
10
6170
5220
2900
1160
1450
Opcionales• Vástago extendido según especificación.• Diseño Antifuego y/o Antiestático.• Palanca con Traba Candado.• Palanca para Alta Frecuencia de Operaciones.• Tercer Vía (Lateral/Inferior).• Extremos extendidos para soldar.
1500
2500
Características TécnicasTechnical Features
Diametro NominalNominal Diameter
PasajePort
Normas de DiseñoDesign Norms
SeriesClass
ExtremosEnds
Materiales ExternosExternal Materials
Materiales InternosInternal Materials
OperaciónOperation
¼” a 4”¼” to 4”
Reducido - TotalReduced - Full Bore
ASME B16.34 - ASME B1.20.1 - BS 21
ASME 1500 / 2500
Roscados NPT, BSPT, BSP / Para soldar SW, BW Extendidos para soldar SW, BWThreaded NPT, BSPT, BSP / Welding SW, BW Extended for Welding SW, BW
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Palanca, Actuador Eléctrico o Neumático (Simple Efecto / Doble Efecto), Reductor a Sin fin y CoronaPalanca Reforzada para alta frecuencia de operacionesHandle, Electrical or Pneumatic Actuator (Single Effect / Double Effect) Manual Gear OperatorReinforced Handle for high frequency operations
Main Features• The solid and efficient design of this valve has been• validated by the requirements of specific tests ensuring• the tightness of the high pressure product.• Tests according to API 6D, API 598 and ASME B16.34• standards with 621 Bar pressures for the ASME 2500• series, and 372 Bar for the ASME 1500 series. • Special seats design with Delrin® provides greater• reliability and durability through all opening and • closing operations.• Reinforced handle allows extremely high frequency of• operation, ensuring a continuous torque and tightness• to avoid potential leaks through the stem.
Optionals• Extended stem according to specification.• Fire-safe and/or antistatic design.• Handle with locking device.• Handle for high frequency of operation.• Third way (Lateral/Lower).• Extended welding ends.
Temp(ºC) psi bar psi bar
SELLO DOBLE EN VÁSTAGO CON TUERCA INFERIOR PARA AJUSTEDOUBLE STEM SEAL WITH LOWER ADJUSTING NUT
ESFERA FLOTANTE / GUIADAFLOATING / GUIDED BALL
VÁSTAGO INEXPULSABLEBLOWOUT-PROOF STEM
32
Válvula Esférica para Alta PresiónHigh Pressure Ball Valve
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Cuerpo / Body
Tapa / Body Connector
Esfera / Ball
Vástago / Stem
Sello de Tapa / End Piece Seal
Sello de Vástago Inferior / Stem Seal
Sello de Vástago Superior / Stem Seal
Tope / Top
Tuerca de Vástago Inferior / Stem Nut
Tuerca de Vástago Superior / Stem Nut
Palanca / Handle
Asientos / Seat
Prensa / Stem Seal Follower
Asiento Metálico / Metal Seat
CV= Galones de agua por minuto para una caida de presion de 1 psi.CV= Flow rate in gallons per minute with 1 psi pressure drop.
ASTM A105
ASTM A105
ASTM A351 CF8/CF8M - ASTM A276/A479 316/304 - ASTM A582 416
ASTM A276/A479 316/304 - ASTM A564 17-4PH - ASTM A582 416
EPDM - Silicona - Buna - Viton® AED - Grafito
PTFE con carga / con Recina Acetalica - Grafito
PTFE con carga / con Recina Acetalica - Grafito
Acero al Carbono / Carbon Steel
SAE 1040 - Acero inoxidable / Stainless Steel
SAE 1040 - Acero inoxidable / Stainless Steel
SAE 1010
PTFE c/Carga - PTFE+Resina Acetalica - Devlon®
SAE 1212 - Acero inoxidable / Stainless Steel
SAE 1020/ 1026 - ASTM A479/A276 316/304
Acero al Carbono / Carbon Steel Acero Inoxidable / Stainless Steel
#150
¼”-½”
¾”
1”
1¼”
1½”
2”
2½”
3”
4”
mm Nxm G/min
ASTM A479/A276 316
ASTM A479/A276 316
ASTM A351 CF8/CF8M - ASTM A276/A479 316/304 - ASTM A582 416
ASTM A276/A479 316/304 - ASTM A564 17-4PH - ASTM A582 416
EPDM - Silicona - Buna - Viton® AED - Grafito
PTFE con carga / con Recina Acetalica - Grafito
PTFE con carga / con Recina Acetalica - Grafito
Acero al Carbono / Carbon Steel
AISI 316
AISI 316
SAE 1010
PTFE c/Carga - PTFE+Resina Acetalica - Devlon®
AISI 316
ASTM A276/A479 316/304
Kg
DiámetroDiameter
PPaso TotalFull Bore
mm
12.5
19
25.4
32
38
50.8
63.5
76.2
-
-
12.5
19
25.4
32
38
50.8
63.5
76.2
78
89
105
115
147
167
170
202
202
64
75
76
112
132
146
146
260
260
SCH40
158
158
205
205
285
285
285
590
590
10
13
13
13
13
16
20
20
19
15.8
20.9
26.6
35
40.9
52.5
62.7
77.9
102.3
13.87
18.85
24.31
32.71
38.1
49.25
59
73.66
97.2
11.78
15.54
20.7
29.46
33.96
42.85
53.97
66.65
87.3
17.1
26.7
33.4
42.2
48.3
60.3
73
88.9
114.3
19
41
71
116
165
289
441
645
645
21.8
27.4
34.1
42.7
49
61
73.7
89.5
115.4
Serie 1500/2500
15
50
95
130
245
440
700
1000
1000
1
1.6
3.1
4.9
8
12.5
20
35
35
El torque (Tq) corresponde a la presión diferencial nominal.Torque corresponds to the nominal differencial pressure.
PPaso ReducidoReduced Bore
mm
Amm
Bmm
Cmm
Fmm
Gmm
Hmm
SCH80 SCH160
Jmm
TorqueNxm
CvGal/min
PesoWeight
Kg
Requerimientos Especiales• Palanca Reforzada para alta frecuencia de operaciones.• Actuador electrico o neumático (simple o doble efecto). • Esfera guiada opcional según especificación. • Sellos de grafito flexible y asientos con carga de coke para vapor• y fluidos térmicos.• Extremos prolongados para soldar según especificación.
Special Requirements• Reinforced handle for high frequency operations. • Pneumatic or electrical actuator (single or double effect). • Trunnion ball under specification. • Flexible graphite and PTFE with coke seals for steam and • thermal fluids.• Extended ends for welding under specification.
A
1 3 12 14 2
4
86
5
10
119
1376
C
B
Ø P
Extremo SW / BW End
jHF
G
Extremo BW / BW End
Ver dimensiones en página 66.See dimensions on page 66.
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes principales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
33
Válvulas Esféricas Tres VíasProductos EspecialesAplicaciones Especiales3-Way Ball ValvesSpecial ProductsSpecial Applications
ContenidoVálvula Esférica de Tres Vías Productos EspecialesAplicaciones Especiales
Contents3-Way Ball Valve Special ProductsSpecial Applications
34-3536-37
38
Válvula Esférica de Tres Vías3-Way Ball Valve
Características Principales• Diseño versátil que permite dirigir de manera acertada la •circulación del fluido en distintas operaciones como por •ejemplo desvío, recirculación, mezclado, dosificación, •by-pass, etc. • Reducción de costo; este tipo de válvulas permite reem- • plazar de dos a tres válvulas convencionales de dos vías y • algunos accesorios de derivación (codos thee, etc), • permitiendo también una instalación mucho más simple.
ConfiguraciónConfiguration
Características TécnicasTechnical Features
Diametro NominalNominal Diameter
PasajePort
SeriesClass
ExtremosEnds
Materiales Materials
OperaciónOperation
Tres Partes ¼" a 4" Bridada PR ½” a 8” - Bridada PT hasta 2½”Alta Presión ½" a 4"3-Pieces ¼” a 4"Flanged Reduced Bore ½" a 8" Flanged Full Bore up to 2½”High Pressure: ½" a 4"
Tres Partes y Alta Presión: Reducido - TotalBridada: Reducido - Total3-Pieces and High Pressure: Reduced - Full BoreFlanged: Reduced - Full Bore
Tres Partes: STD 70 BAR / BS 800Alta Presion: ASME 1500 / 2500Bridada Paso Reducido: ASME 150 / 300 / 6003-Pieces: STD 70 BAR / BS 800Flanged Reduced Bore: ASME 1500 / 2500High Pressure: ASME 150 / 300 / 600
Roscados: NPT, BSPT, BSP / Para soldar: SW - BWBridados: RF, RJ, FFThreaded: NPT, BSPT, BSP / Welding: SW - BWFlanged: RF, RJ
Acero al Carbono, Acero Inoxidable, Bronce Carbon Steel, Stainless Steel, Bronze
Palanca, Actuador Eléctrico o Neumático (Simple Efecto / Doble Efecto), Reductor a Sin fin y Corona.Palanca ReforzadaHandle, Electrical or Pneumatic Actuator (Single,Effect / Double Effect) Manual Gear Operator,Handle Reforced
Opcionales• Vástago extendido según especificación.• Diseño antifuego y/o antiestático.• Palanca con traba candado.• Extremos extendidos.
Main Features• Versatile design that allows correct direction of fluid flow • in different operations, such as deflection, recirculation, • mixing, dosing, bypass, etc.• Cost reduction; these valves can replace two to three • conventional 2-way valves and some bypass fittings • (elbows, tees, etc.), which also allows for simpler • installation.
Optionals• Extended stem according to specification.• Fire-safe and/or antistatic design.• Handle with locking device.• Extended ends.
3er Vía LateralHorizontal Flow
90º 360º 180º 90º
3er Vía InferiorVertical Flow
La válvula no trabajaen esta posición. The valve does notwork in this position.
• Diferentes configuraciones disponibles dependiendo• de la construcción de la esfera y los topes de palanca. • Many configurations are available depending on the• construction of the ball and the top of the handle.
*
*
34
VÁSTAGO INEXPULSABLEBLOWOUT-PROOF STEM
ESFERA FLOTANTE CON TERCER VÍA INFERIOR / LATERALLATERAL / LOWER 3-WAY FLOATING SPHERE
SELLO DOBLE EN VÁSTAGO CON TUERCA INFERIOR PARA AJUSTEDOUBLE STEM SEAL WITH LOWER ADJUSTING NUT
VÁSTAGO INEXPULSABLEBLOWOUT-PROOF STEM
Válvula Esférica de Tres Vías3-Way Ball Valve
¼”
¾”
½”
¾”
1”
1¼”
1½”
2”
2½”
3”
4”
88
88
88
94
98
124
138
148
182
210
248
DiámetroDiameter
79
79
79
83
56
75
83
103
135
140
165
-
-
-
88
94
96
124
142
152
182
210
Amm
Paso TotalFull Bore
Bmm
A
B
-
-
-
79
83
56
75
83
103
135
140
Amm
Paso ReducidoReduced Bore
Bmm
Válvula Esférica de Tres Partes de Tres VíasMultiport 3-Pieces Ball Valve
½”
¾”
1”
1¼”
1½”
2”
2½”
3”
4”
5”
8”
45
56
56
69
62
67
82
84
94
135
147
DiámetroDiameter
63
61
71
71
104
111
108
119
134
132
145
70
61
80
91
102
127
140
152
181
248
280
A1mm
Serie 150
A2mm
Bmm
Válvula Esférica Bridada Serie 150 / 300 / 600 de Tres Vías3-Way Flanged Ball Valve Series 150 / 300 / 600
½”
¾”
1”
1¼”
1½”
2”
2½”
3”
72
82
96
110
130
146
166
192
DiámetroDiameter
47
47
55
65
84
101
113
132
Amm
Bmm
Válvulas Esféricas de Alta Presión Serie 1500 y 2500 de Tres VíasThree Ways High Pressure Ball Valves Series 1500 and 2500
A1 A2
B
35
BA
Productos EspecialesSpecial Products
Características Principales• En casos particulares relacionados al espacio disponible, la palanca se reem-• plaza por un cuadrado de operación de manera tal que la válvula pueda ser• operada mediante una llave o un dispositivo especial. • Las dimensiones de los cuadrados están estandarizados por VALMEC, sin• embargo pueden ser fabricadas según requerimientos del usuario. Main Features• When there space no available, the handle is replaced by an operation• square that allows to operate the valve with a key or a special device.• Dimensions of the squares are standard, however, different dimensions• can be requested by the user.
Características Principales• El retorno a resorte es utilizado en aquellos casos en los cuales la válvula se• encuentre montada en condición de normal cerrada o normal abierta y• después de ser operada la misma, se vuelva a posicionar a condición de• normal, sin necesidad de que el operador sea advertido.• Es utilizada en drenajes, venteos, by-pass, y procesos industriales que exi-• jan seguridad de posicionamiento. Main Features• Spring return handle is used when it is necessary that the valve returns to its• original position after being operated with no need intervention of the user.• It is useful in vent, drain, by-pass and industrial process when assurance is• requerided by working conditions.
Características Principales• Modelo con un extremo bridado de 3½” serie 150 o con un extremo ros-• cado de 1¼” serie 600. • Ambos modelos de pasaje total.• Construidas en ASTM A126. Main Features• Model with flanged end 3½” 150 series or threaded end 1¼” 600 series.• Both models in full bore.• Built om ASTM A126.
Cuadrado de OperaciónOperation Square
Válvulas para FerrocarrilRailway Valves
Palanca de Retorno a ResorteSpring Return Handle
36
VÁSTAGO EXTENDIDOEXTENDED STEM
RESORTE DE RETORNOSPRING RETURN
PALANCAHANDLE
EXTREMO ROSCADOTHREADED END
ESFERA FLOTANTEFLOATING BALL
PALANCA CON ACCIONAMIENTO DE BLOQUEOHANDLE WITH LOCKING DRIVE
VÁSTAGO INEXPULSABLECON SELLO DOBLEBLOWOUT-PROOF STEMWITH DOUBLE SEAL
CUADRADO DE OPERACIONOPERATION SQUARE
EXTREMO ROSCADOTHREADED END
ESFERA FLOTANTEFLOATING BALL
37
Productos EspecialesSpecial Products
Características Principales• Longitud variable bajo especificación del cliente.• Puede ser requerida en configuración anti-fuego (API 607/ISO 10497)• y/o antiestática.• El vástago prolongado puede solicitarse con operador manual a palanca,• con caja reductora a sin fin, o con accionamiento a través de actuador • neumático o eléctrico.• Este diseño se utiliza principalmente para tuberías con aislación térmica. Main Features• The length can be ordered by the user.• It may be ordered firesafe (API 607/ISO 10497) and/or antistatic.• The extended stem my be ordered with manual gear, worm gearbox, • or pneumatic or electrical actuator.• This design is mainly used for thermal insulation pipelines.
Características Principales• Longitud de cadena variable bajo especificación del cliente.• La cadena calibrada permite accionar la válvula cuando la misma se en-• cuentra a una altura determinada de fácil o difícil acceso, sin necesidad • de que el usuario esté cerca de la válvula para operarla, brindando• una mayor seguridad de operación y evitando posibles accidentes. • Se utiliza en válvulas de accionamiento manual con caja reductora • a sin fin, ubicadas en tendido de tubería en altura. Main Features• The length of the chain can be ordered by the user.• The calibrated chain allows to actuate the valve when it is at a certain height,• easy or hard to-access, with the need for the user to be near the valve,• providing greater security in the operation and avoiding possible accidents.• It is used in manual valves with worm gearbox, located in high-rise laying.
Características Principales• Longitud variable bajo especificación del cliente.• Este diseño es utilizado en tuberías enterradas o a distancias de• difícil acceso para el operador.• Puede ser requerida con inyección de sellador/lubricante y drenaje.• A. La inyección de lubricante periódicamente en los asientos y • vástago aumenta la vida útil de la válvula.• B. Existen selladores más densos o viscosos para inyectar en caso• de emergencia cuando se requiere el sellado de la válvula. • Es muy utilizado en operaciones relacionadas con la producción y• el transporte de petróleo y/o gas. Main Features• The length can be ordered by the user.• This design is mainly used for pipelines buried or hard-to-access• for the operator. • It may be ordered with sealant injection/lubricant and drain.• A. A regular lubricant injection in the seats and stem increases • the valve life cycle.• B. There are heavier and thicker sealants to inject in case of an • emergency when the valve must be sealed. • It is widely used for operations related to the production and • transportation of petroleum and/or gas.
Vástago ProlongadoExtended Stem
Extensor de VástagoStem Extensor
Cadena CalibradaCalibrated Chain
CAJA REDUCTORAGEARBOX
CADENA CALIBRADACALIBRATED CHAIN
VOLANTE DE FUNDICIÓNCAST IRON WHEEL
PURGAPURGE
INYECCIÓN EN LOS ASIENTOSINJECTION IN THE SEATS
EXTENSOR DE VÁSTAGO STEMEXTENSOR
VÁSTAGO PROLONGADOEXTENDED STEM
CUERPOBODY
ESFERA FLOTANTEFLOATING BALL
INYECCIÓN EN EL VÁSTAGOINJECTION IN THE STEM
Aplicaciones Especiales de Válvulas EsféricasSpecial Applications of Ball Valves
Características Principales• Las Válvulas utilizadas para operar con vapor, se construyen con asientos• de PTFE ó PTFE con carga en contención metálica, Sellos de vástago en• los mismos materiales ó grafito flexible y sellos de cuerpo en EPDM.• Grafito Flexible: Resiste 550ºC con vapor, hasta 3.000ºC en atmósfera• neutra y presiones de hasta 10.000 psi. • EPDM (Etileno-Propileno): Es un caucho fabricado como copolímero de• etileno y propileno. Soporta hasta 200ºC en vapor de agua. Además es• compatibles con ácidos orgánicos e inorgánicos, fluidos hidraúlicos con• base de éster-fosfato y disolventes polares. Main Features• Ball valves used to operate with steam are provided with PTFE or PTFE• with metallic contention support PTFE seats, stem sealing in the same• materials or flexible graphite and body seals in EPDM.• Flexible Graphite: Up to 550ºC water steam, and 3.000ºC in neutral• atmosphere, and pressures up to 10.000 psi. • EPDM (Ethylene-Propylene): Is composed ethylene-propylene • copolymer. Resists up to 200ºC water steam. Excellent resistance to acid,• alkali metals, hydraulic fluids. Not recommended for petroleum oil service.
Características Principales• Diseñada exclusivamente para el uso criogénico, trabajando en un rango • de temperatura que desciende hasta los -196ºC es ideal para GLP y GNL. • Fabricada íntegramente de acero inoxidable 316, con extensor de vás-• tago en dos partes y agujero de alivio en la esfera.• El extensor de vástago en dos partes, está diseñado con una brida de• unión entre estas que mejora la disipación de las bajas temperaturas,• optimizando la operatividad de la válvula.• Los extremos de esta válvula pueden ser soldados (BW, SW, • Extended SW/BW) o roscados (NPT, BSPT, BSP, API). • Esta válvula puede ser actuada mediante actuadores neumáticos ó• eléctricos y a su vez controlada a través de distintos accesorios. Main Features• Designed for cryogenic use, working at a temperature range of up to• -196ºC and it is ideal for LPG and LNG. • Made entirely of 316 stainless steel, with stem extensor in two parts and• relief hole in ball.• The stem extensor in two parts is designed with a connection flange• between them that improves the dissipation of low temperatures, • optimizing the valve workability. • The ends of this valve can be welded (BW, SW, Extended SW/BW)• or threaded (NPT, BSPT, BSP, API). • This valve can be actuated by means of pneumatic or electrical actuators• and controlled, at the same time, through different accessories.
Características Principales• El diseño Calefaccionado se aplica a válvulas bridadas de paso reducido• y total, diseñadas en un solo cuerpo y con tapón.• Estas válvulas están construídas en acero al carbono o acero anoxidable.• Utilizados para mantener la temperatura del fluido, de acuerdo a los reque-• rimientos durante la circulación por la válvula. Main Features• The heated design applies to reduced and total bore flanged valves,• designed in a single body with end cap.• Carbon steel or stainless steel body.• They are useful in order to control the temperature of the fluid.
CuerpoBody
TapónInsert
Fluido de CalefacciónHot Fluid
CuerpoBody Sellos de Vástago
de PTFE con carga(coke) o gra�to�exible.Reinforced PTFE(coke) or Flexible Graphite Stem Seals
Asientos de PTFEo PTFE con cargaen contención metálica. PTFE or ReinforcedPTFE Seals on metalsupport
Sellos de Tapade EPDMEnd Piece Sealsof EPDM
Válvulas Esféricas para VaporSteam Service Ball Valves
Válvulas Esféricas CalefaccionadasHeating Service Ball Valves
Válvula CriogénicaCryogenic Valve
38
Esfera Perforada Perforated Ball
Vástago CriogénicoCryogenic Stem
Cuerpo CriogénicoCryogenic Body
Tapa CriogénicaCryogenic Body Connector
39
Válvulas MariposaButterfly Valves
ContenidoVálvulas Mariposa
ContentsButterfly Valves 40-41
Válvula MariposaButterfly Valve
Características Principales• Diámetros disponibles entre 2” a 8”.• Tipo Wafer, diseñadas de acuerdo a API 609.• Montaje entre Bridas serie ASME 150.• Diseño de asiento con alma de resina e Intercambiable, • insertado en el cuerpo a presión, permite lograr una• mayor vida útil y la posibilidad de cambiar únicamente• esta parte del producto en caso de querer controlar otro• fluido que demande otro material de asiento. • Palanca robusta, sólida y tenaz de• acero al carbono laminado.• Cuerpo de acero en A-126, WCB, CF8 y CF8M.• Pintura de recubrimiento y protección en el cuerpo por • deposición electroestática. • Disco de Acero Inoxidable en CF8M/316, CF8/304 y 416.• Eje de Acero Inoxidable en CF8M/316, CF8/304 y 416.• Torre diseñada según ISO 5211 para • montaje de actuadores.• Asientos de Buna, EPDM, Viton® y PTFE (Teflón®).
Características TécnicasTechnical Features
Diametro NominalNominal Diameter
SeriesClass
Materiales ExternosExternal Materials
Materiales InternosInternal Materials
OperaciónOperation
2” a 8”2” to 8”
ASME 150
Acero al Carbono, Acero Inoxidable Carbon Steel, Stainless Steel
Acero Inoxidable, BronceStainless Steel, Bronze
Palanca, Actuador Eléctrico o Neumático (Simple Efecto / Doble Efecto), Reductor a Sin FinHandle, Electrical or Pneumatic Actuator (Single,Effect / Double Effect), Manual Gear Operator
Curva de Presión / TemperaturaPressure / Temperature Rating
0 50 100 150 200
30
20
10
Temperatura / Temperature (ºC)
Pre
sión
Pre
ssur
e (b
ar)
150
Opcionales• Pintura especial de recubrimiento y protección según• especificación del usuario • Vástago extendido según especificación del usuario• Actuación mediante electroposicionador• Actuación neumática o eléctrica.• Palanca de seguridad con traba candado.• Palanca 100% en acero inoxidable.
Main Features• Available diameters 2” to 8”. • Wafer type, designed as per Norm API 609. • ASME 150 mounting between between flanges. • Interchangeable and resin core designed seat, pressed• into the body, allows to accomplish a greater life cycle• and the possibility of changing only that part of the• product, in case another liquid that requires another• material seat must be controlled. • Robust, solid and resilient handle, made of laminated • carbon steel. • Steel body in A-126, WCB, CF8, and CF8M. • Coating paint and protection in the body by• electrostatic sedimentation.• Stainless steel disk in CF8M/316, CF8/304, and 416. • Stainless steel stem in CF8M/316, CF8/304, and 416.• Cap designed as per ISO 5211 for assembling actuators.• Buna, EPDM, Viton® and PTFE (Teflón®) seats.
40
Optionals• Special coating paint and protection as per • user specification. • Extended stem as per user specification. • Actuation by means of an electropositioner. • Pneumatic or electrical actuation. • Security handle with padlock blocker. • 100% stainless steel handle.
DISCO DE ACERO INOXIDABLESTAINLESS STEEL DISK
ASIENTOS INTERCAMBIABLESINTERCHANGEABLE SEATS
VÁSTAGO INEXPULSABLEBLOWOUT-PROOF STEM
INDICADOR DE POSICIÓNDEL DISCO DE OBTURACIÓN OBTURATION DISKPOSITION INDICATOR
Rangos de Presión y Temperatura ASME B16.34Pressure and Temperature Range ASME B16.34
ASTM A216 WCB ASTM A351 CF8 ASTM A351 CF8M
-20 -38
50
100
150
200
250
19.6
19.2
17.7
15.8
13.8
12.1
19
18.3
15.7
14.2
13.2
12.1
19.0
19.2
17.7
15.8
13.8
12.1
150T (ºC) 150 150
Válvula MariposaButterfly Valve
A
Aplicación de Válvula Mariposa entre Bridas• La Válvula Mariposa para colocar entre • bridas va insertada entre dos bridas estándar• abullonadas entre sí, utilizando los agujeros• perforados del Cuerpo como “guía” para• los espárragos.• El requerimiento de espacio es mínimo ya • que su peso es aproximadamente un 40%• de una válvula esférica común.• Diseño compacto, brinda bajo costo y espa- • cio de instalación reducido.
Butterfly ValveApplied between Flanges• Butterfly valve to place between flanges is• installed between two standard flanges,• puffed to each other, by means of holes• pierced in the body as “guide” for studs. • The space required is minimum, as its• weight is approximately 40% a regular • ball valve. • Compact design, low cost and reduced• installation space.
2”
3”
4”
6”
8”
mm Nxm G/min Kg
162
183
203
226
260
ØA
15
15.5
15.5
16
16
43
48
52
56
61
47
75
98
148
202
12.7
12.7
15.8
19
22
8.9
8.9
11
11
16
120.7
152.4
190.5
241.3
298.5
18
18
18
18
18
77
77
101
101
138
4x19
4x19
4x19
4x22
4x22
104
128.5
161
220
280
50
50
70
70
102
4x7
4x7
4x9
4x9
4x12
3.7
4.4
6.9
10.3
17.2
mm
PesoWeight
Kg
B C D E H L M x-N P V W z-S
41
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
10
11
12
Cuerpo / Body
Asiento / Seat
Vástago / Stem
Disco / Disk
Pin / Pin
Buje / Bushing
O-ring / O-ring
Prisionero / Prisoner Bolt
Tope / Top
Palanca / Handle
Espina / Thorn
Resorte / Spring
ASTM A126 - ASTM A216 WCB - ASTM A351 CF8/CF8M
NBR - EPDM - Viton® - PTFE
ASTM A276/479 Gr 316/304 - ASTM A351 CF8/CF8M - ASTM A582 Gr 416
ASTM A276/479 Gr 316/304 - ASTM A351 CF8/CF8M
Acero Inoxidable / Stainless Steel
Bronce SAE 40 / Bronze SAE 40
NBR - EPDM - Viton®
Gusano Allen
Tornillo Allen
Acero al Carbono - Acero Inoxidable / Carbon Steel - Stainless Steel
Acero Inoxidable / Stainless Steel
SAE 1070
Material / Material
z-S
ESPÁRRAGOS Y TUERCASBOLTS AND NUTS
VÁLVULA MARIPOSABUTTERFLY VALVE
TUBERÍAPIPING
Ø H
W
V
C
E
B
M
P
x - N
D
1
2
4
5
6
7
3
89
1012 11
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes principales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
FOTO DE CAMPOPRINCIPAL01
42
A través de un layout eficiente y bancos de ensayos adaptables y flexibles, VALMEC posee una elevada capacidad de ensamble con un alto grado de versatilidad para encarar todas sus líneas de productos de manera rápida y segura.
Área de Ensamble
By means of an efficient layout and adaptable and flexible test benches, VALMEC has a high assembly capacity, with a high versatility grade, to deal with all its Product lines in a rapid and safe manner.
Assembly Area
43
Medios de OperaciónOperation Drives
ContenidoMedios de OperaciónActuadores Neumáticos y Operadores de EmergenciaActuadores Eléctricos y Accesorios para AutomatizaciónReductor Sin Fin-Corona
ContentsOperation DrivesPneumatic Actuators andEmergency OperatorsElectrical Actuators andAccessories for AutomationManual Gear Actuator
44
45
4647
Medios de Operación de VálvulasValves Operation Drives
Las válvulas VALMEC se suministran con palanca para su operación. La palanca ha sido diseñada para un cómodo agarre, mayor durabilidad en la unión con el vástago y dimen-siones adecuadas para permitir su operación mediante la aplicación de una fuerza razonable. Los largos de palanca pueden ser requeridos en diferentes medidas o normal-izadas conforme a especificaciones de los usuarios. VALMEC valves are provided with handle for their operation. The handle has been designed for a confortable operation, greater durability in the union with the stem and with suitable dimension to allow its operation by low force. The lenghts of the handles can be ordered in different sizes or standard size to meet the user specifications.
Son recomendados para válvulas esféricas o mariposa, cuando el torque es mayor a 360 Nm, o cuando el espacio disponible no permite utilizar palanca, se recomienda el uso de reductor a sin fin y corona.Son contruídos en fundición nodular y acero al carbono. Están sellados para ser utilizados a la intemperie. Tienen lubricación permanente e incluyen indicador visual de posición.
Manual gear actuators are recommended for use on ball and butterfly valves where lever handles presents space problems or when the torque is greater than 360 Nm.They are fully sealed and are weather-proof, lubricated for lifetime and require no future lubrication. They include visual position indicator.
La posibilidad de incorporar un reductor entre la válvula y el actuador ofrece la plena seguridad de accionamiento ante cualquier eventualidad que produzca la falta de energía necesaria para la operación. Por medio de un dispositivo que se encuentra en el reductor, colocando el mismo en la posición adecuada, se mantiene el sin fin desacoplado de la corona para que sea el actuador quien accione la válvula a través del eje que conecta la misma con ambos medios de operación. En caso de necesitar operar la válvula mediante el reductor, se procede a acoplar el sin fin con la corona cambiando la posición del mismo dispositivo, pudiendo accionar manualmente el volante para cerrar o abrir la válvula. The possibility of incorporating a gearbox between the valve and the actuator offers full operational safety in case of failure of the main source of energy necessary for operation. By setting a device located in the gearbox in the appropriate position, the worm remains uncoupled from the ring so that the valve is operated by the actuator through the stem connecting the valve to both operation systems. If the valve needs to be operated with the gearbox, the worm is coupled to the ring by switching the position of the device, which allows the manual operation of the hand wheel to open or close the valve.
PalancaRegular Handle
Actuador y Reductor IncorporadoActuator and Build-in Gearbox
Reductor a Sin Fin y CoronaManual Gear Actuator
Actuador Neumático o EléctricoPneumatic or Electrical Actuator
44
Las válvulas VALMEC se complementan con los actuadores neumáticos y eléctricos OMAL, que permiten automatizar las operaciones de apertura y cierre de válvulas mediante aire, señal eléctrica o la combinación de ambas.La gama de actuadores OMAL-VALMEC cubre toda las aplicaciones necesarias en la industria cuando se requiera automatización y control. Están disponibles para todos los modelos de válvulas de ¼” a 18”.Adicionalmente VALMEC dispone de una serie de accesorios para control y/o acciona-miento de los actuadores como ser indicadores de posición y límite de carrera, mecáni-cos o magnéticos, cajas indicadoras con límite de carrera y posicionadores.
VALMEC valves are complemented with OMAL pneumatic and electrical actuators that allow to automate the operation of valves with the air supply, electrical and combination of both.The range of OMAL-VALMEC actuators covers all necessary applications in the industry when it requires automation and control. Available from ¼” to 18” for all models.Additionally VALMEC has a severals acccessories to control or drive of the actuators, like mechanical or magnetic limit switches, limit switch and positioner are available.
Actuadores Neumáticos y Operadores de EmergenciaPneumatic actuators and Emergency Operators
Piñón y Cremallera Actuadores Disponibles• Doble efecto en aluminio.• Simple efecto en aluminio. Características Principales• Par torsor lineal y constante.• Angulo de giro: 90º ± 5º (mediante• regulación externa).• Presión de Alimentación de aire • entre 2 a 8 bar. • No requieren lubricación.• Diseñados bajo normas Namur • VDI/VDE 3845 e ISO 5211.
Los operadores de emergencia, son utilizados para realizar el accionamiento de la válvula cuando no se posee con alguna fuente de potencia, ya sea gas/ aire para el actuador neumático, o tensión para un actuador eléctrico. Emergency operators are used to manually actuate the valve when, for whatever reason, power source/supply, whether gas or air to feed the pneumatic actuator or electricity to feed an electrical actuator,is lost.
Valmec trabaja con las marcas más reconocidas del Mercado en lo que respecta a Productos para Automatización. Para más referencias consul-tar a nuestro Departamento Técnico.Valmec works with the most recognized brands in the market with regard to automation products. For more references or information consult our Technical Department.
45
Operadores de EmergenciaElectrical Actuators
Actuadores NeumáticosPneumatics Actuators
Scotch Yoke Available Actuators• Double effect in aluminum.• Double effect in aluminum.• Heavy duty actuators in simple • carbon steel.• Heavy duty actuators in double effect • carbon steel.• Hydraulic gas actuator. Main Features• Non-lineal torque, parabolic.• Symmetric or asymmetric pair (Canted).• Turning angle: 90º ± 5º (by means • of external regulation).• Air feed pressure between 3-8 bar. • No lubrication required.• Designed under Namur • VDI/VDE 3845 and ISO 5211.
Yugo Escoces Actuadores Disponibles• Doble efecto en aluminio.• Simple efecto en aluminio.• Actuadores heavy duty en acero al• carbono simple efecto.• Actuadores heavy duty en acero al• carbono doble efecto.• Actuador de gas hidráulico.
Características Principales• Par Torsor no lineal, parabólico.• Par simétrico o asimétrico (Canted).• Angulo de giro: 90º ± 5º • (mediante regulación externa).• Presión de alimentación de aire • entre 3 a 8 bar. • No requieren lubricación.• Diseñados bajo normas Namur• VDI/VDE 3845 e ISO 5211.
Rack and Pinion Available Actuators• Double effect in aluminum.• Simple effect in aluminum. Main Features• Lineal and constant torque.• Turning angle: 90º ± 5º (by means• of external regulation).• Air feed pressure between 2-8 bar.• No lubrication required.• Designed under Namur• VDI/VDE 3845 and ISO 5211.
Tipos de Operadores de Emergencia• Jack Screw Override• Operador Hidráulico.• Caja Acople Desacople• (Declutchable Gear Box)
Types of Emergency Operators• Jack Screw Override• Hydraulic operator• Clutch/Declutch box• (Declutchable Gear Box)
46
Actuadores Eléctricos y Accesorios para AutomatizaciónElectrical Actuators and Automation Accessories
Características Principales• Monitor de posición de válvula con switches mecánicos, • magnéticos e inductivos.• Monitor y controlador de válvula.• Indicadores visuales de posición (Beacon).• Posicionadores eléctricos y neumáticos.• Posicionadores inteligentes.• Transmisor digital de posición con PST (Partial Stroke Test) y • ESD (Emergency Shut Down).• Electroválvulas para áreas clasificadas y no clasificadas.• Sensor de posición tipo “Reed Switch”, Inductivo, etc.
Accesorios para AutomatizaciónAccessories for Automation
Actuadores Eléctricos Electrical Actuators
Actuadores para Áreas Clasificadas y No Clasificadas
Características Principales• Actuadores On – OFF o Modulantes• Tensión de alimentación 380 VAC, 220 VAC, 115VAC, 24VAC y 24 VDC.• Señal de comando 4-20 mA (1-5 Vdc) (solo modulante).• Señal de salida 4-20 mA (1-5 Vdc) (solo modulante).• Límites de Carrera Incorporados.• Protocolos de comunicación (Fieldbus, Modbus, Hart etc). • Conexiones para válvula normalizadas ISO 5211.• Indicador Visual.• Operador manual de emergencia.
Actuators forClassified and Non-Classified Areas
Main Features• Actuator On-Off or modulators.• Power supply voltage 380 VAC, 220 VAC, 115VAC, 24VAC and 24 VDC.• Command signal 4-20 mA (1-5 Vdc) (only modulator).• Output signal 4-20 mA (1-5 Vdc) (only modulator).• Built-in limit switches.• Communication protocols (Fieldbus, Modbus, Hart etc). • Connections for standardized valves ISO 5211.• Visual indicator.• Emergency manual operator.
Main Features• Valve position monitor with mechanical, magnetic and inductive switches.• Valve monitor and controller.• Position visual indicators (Beacon).• Electrical and pneumatic positioners.• Smart positioners.• Position digital transmitter with PST (Partial Stroke Test) and• ESD (Emergency Shut Down).• Electrovalves for classified and non-classified areas.• Position sensors type "Reed Switch", Inductive, etc.
Valmec trabaja con las marcas más reconocidas del Mercado en lo que respecta a Productos para Automatización. Para más referencias consultar a nuestro Departamento Técnico.Valmec works with the most recognized brands in the market with regard to automation products. For more references or information consult our Technical Department.
Reductor Sin Fin-Corona Manual Gear Actuator
Características Principales• Diseñados para accionar válvulas con operación de 1/4• de giro (Esféricas, Tapón lubricado, Mariposas, etc.).• Completamente sellados y con lubricación permanente.• Contacto óptimo y eficiente entre corona y sin fin para• una mayor vida útil y un correcto funcionamiento.
Main Features• Designed to operate 1/4 turn valves (ball, lubricated plug, • butterfly, etc.).• Fully sealed and lubricated for lifetime.• Optimal and efficient contact between worm gear and• worm shaft for longer useful life and proper operation.
Parte / Part
Caja / Housing
Piñon / Worm Shaft
Corona / Worm Gear
Volante / Wheel
ASTM A126
SAE 4140
ASTM A445
Acero al Carbono / Carbon Steel
Material / Material
Recomendaciones de Uso• Se recomienda el uso de reductor para las válvulas de• torque superior a 360 Nxm, cuando la apertura o• cierre de la válvula deba ser lenta.• Puede ser montado sobre extensor.
Recommendations of Use• Manual gate actuators are recommended to be used• when valve torque is greater than 360 Nxm, when• valve must be operated slowly.• It can be mounted on extensor.
El modelo RN 5 incluye caja pre-reductora.Model RN5 includes primary reduction gearing.
Nota: La tabla indica la válvula más chica de la serie a partir de la cual se recomienda usar el reductor. Note: The table shows the smallest valve from the series for which the actuator is recommended.
#150
RN1
RN3
RN5
RN7
mm Nxm G/min Kg
ModeloModel
50:1
80:1
180:1
236:1
700
1500
4500
8500
6200
13300
39828
75231
12.5:1
26:1
45:1
63:1
Nm
65
99
99
233
78
122
115.5
138
165
240
240
290
20
25
25
25
165
165
165
165
15
30
45
55
300
450
450
610
197
264
264
369
Dimensiones / Dimensions
Torque de OperaciónOutput Torque
Lb. in
Ø Pmm
TorqueNxm
Ø VolanteØ Handwheel
PesoWeight
Kg
RN1
RN3
RN5
RN7
mm Nxm G/min Kg
ModeloModel
6”
8” - 10” - 12”
14” - 16”
-
1504”
6” - 8”
10” - 12” - 14” - 16”
-
4”
6”
8” - 10”
12” - 14” - 16”
8”
10” - 12” - 14”
16” - 18”
-
6”
8” - 10”
12” - 14”
16”
6”
8”
10”
12” - 14” - 16”
4”
6”
-
-
3”
4”
6”
-
3”
4”
6”
-
300 600 150 300 600 600 900 1500
Válvulas Bridadas Paso TotalFull Port Flanged Valves
Válvulas Bridadas Paso ReducidoReducted Port Flanged Valves
Válvulas Doble GuiadasDouble Trunnion Valves
Recomendaciones para el uso de Reductores / Recommendation for the Gear Box Use
BA
C
Ø D
Ø EØ P
Ø Emm
Ø Dmm
Cmm
Bmm
Amm
Vueltas p/90Turns for 90
RelaciónGear Ratio
VOLANTEWHEEL
PIÑÓNWORM SHAFT
EJESHAFT
CORONAWORM GEAR
CAJAHOUSING
47
REDUCTOR SIN FIN-CORONAINSTALADO EN VÁLVULA BRIDADA DE PASO TOTAL MANUAL GEAR ACTUATOR INSTALLED ON TOTAL BORE FLANGED VALVE
Componentes PrincipalesMain Components
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes prin-cipales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
La vocación de nuestros profesionales en la Investigación y el Desarrollo nos genera un constante desafío hacia la excelencia, utilizando las más avanzadas herramientas informáticas para poder lograr los avances permanentes de forma eficiente.
Departamento de Ingenieríae I+D
The commitment of our professionals at Research and Development generates constant challenges towards excellence, using the most advanced IT tools to efficiently achieve permanent progress.
R&D and Engineering Department
48
49
Automatización y Sistemas de Control Automation and Control Systems
ContenidoAutomatizaciónSistemas de Control
ContentsAutomationControl Systems
5051
Automatización y Sistemas de ControlAutomation and Control Systems
Características PrincipalesLa automatización de nuestras válvulas es un complemento que nos distingue en el mercado, con diseños a medida y de acuerdo a las necesidades y especificaciones de nuestros clientes.
Lógicas de Tablero • De corte por baja presión.• Tablero de corte por alta presión.• Tablero de corte por alta y baja presión. • Tablero de corte por alta baja y muy baja presión.• Tablero de corte por gradiente de presión / tiempo • (Line Break).• Tablero inhibidor de apertura de válvula por • presión diferencial.• Tablero de comando de última posición.• Tablero de comando local-remoto.• Tablero de comando redundante.• Paneles reductores de presión para gas.
50
Main FeaturesAutomation of our valves is a complement that distinguishes us in the market, with customized designs, based on the needs and specifications of our clients.
Board Logic• Low pressure cutting board.• High pressure cutting board.• High and low pressure cutting board.• High, low and very low pressure cutting board.• Time/pressure gradient cutting board (Line Break).• Differential pressure valve opening blocking board.• Final position command board.• Local-remote command board.• Duplicative command board.• Gas pressure reducing panels.
TABLERO DE COMANDOINSTRUMENT COMMAND BOARD
Esquema de Automatización según EspecificaciónAutomation Scheme according to Specification
PANEL DE REGULACIÓN DE PRESIÓNPRESSURE REGULATION PANEL
Equipo Autónomo con Energía Renovable
CONSULTE
Automatización y Sistemas de ControlAutomation and Control Systems
Para una correcta elección, consulte a nuestro Departamento Técnico.For a right choise, consult our Technical Department.
51
Sistemas AutónomosAutonomous Systems
Dependiendo de la necesidad del usuario, los equipos están basados en lógicas solidas con componentes de primer nivel mundial. Las tres grandes lógicas de equipos son:
• Neumáticos• Electro-Neumáticos• Electrónicos
Equipments are based on sound logics with world- class components, depending on the user’s need. The three main equipment logics are:
• Pneumatic• Electropneumatic• Electronic
Equipamiento según Especificación Equipment according to Specification
Los diseños son acompañados, cuando así lo soliciten, con recipientes a presión calculados según las cantidad de carreras que desee el cliente, nuestros recipientes pueden estar diseñados por ASME VIII Div. 1, o cilindros de acero sin costura según IRAM 2526.
Designs come, when requested, with pressure recipients calculated on the amount of switches the client wants; our recipients can be designed by ASME VIII Div. 1, or seamless steel cylinders as per IRAM 2526.
Equipo Autónomo con Energía Renovable
CONSULTE
TABLERO DE COMANDOINSTRUMENT COMMAND BOARD
150.0
2016
.5
PLACA DE IDENTIFICACION
176.0
600.0
10.0
80.0
R20.0
LONG
. SOL
DADU
RA 17
0.0
5
6
BASE
1350
.0
1702
.0
490.5
12001200
3
2
1
4
2
3
RECIPIENTES A PRESIÓNPRESSURE RECIPIENTS
VÁLVULA CON ACTUADOR NEUMÁTICO O ELÉCTRICOVALVE WITH PNEUMATIC OR ELECTRICAL ACTUATOR
52
La capacidad tecnológica del sector de metrología dentro del área de calidad, permite controlar las exigentes tolerancias dimensionales de los distintos diseños en el 100% de las piezas mecanizadas para asegurar el correcto funcionamiento del producto, brindando seguridad y confianza al usuario.
Área de Calidad / Metrología
The technological capacity of the metrology sector, within the quality area, allows controlling the demanding dimensional tolerances of the different designs in 100% of the machined parts, with the purpose of ensuring the proper operation of the product, providing safety and trust to the user.
Quality Area / Metrology
53
Conjuntos Petroleros y AccesoriosOil Sets and Accessories
ContenidoConjuntos Petroleros AccesoriosUnión Doble a Golpe
ContentsOil Sets AccessoriesDouble Blow Union
545556
Conjuntos Petroleros y AccesoriosOil Sets and Accessories
Características Principales• Diseño de acuerdo a planos otorgados por el cliente.• Diámetro, serie de cañería y accesorios totalmente con- • figurables según especificación.• La capacidad técnologica instalada en VALMEC permite • diseñar y fabricar según requerimientos y normas todos • los componentes y accesorios que conforman el conjunto.• La ingeniería de diseño flexible y versatil, sumado a un •layout de ensamblado productivo aseguran el correcto • funcionamiento del conjunto.
54
Características TécnicasTechnical Features
Normas de DiseñoDesign Norms
SeriesClass
TemperaturaTemperature
ExtremosEnds
Materiales ExternosExternal Materials
Materiales InternosInternal Materials
Operación de VálvulasValves Operation
Según especificaciónAccording to specification
ASME 900 / 1500 - BS 800
Operación entre 0ºC y 180ºCOperation between 0ºC y 180ºC
Bridados RF, RJ, FF Roscados NPT, BSPT, BSPPara Soldar SW, BWFlanged RF, RJ, FFThreaded NPT - BSPT - BSPWelding: SW, BW
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Acero al Carbono, Acero Inoxidable Carbon Steel, Stainless Steel
Palanca, Actuador, ReductorHandle, Actuator, Gear
Main Features• Design according to drawings supplied by client.• Fully configurable size, piping and fittings according • to specification.• The technological capacity installed in VALMEC allows • you to design nd manufacture all the components and • accessories y accessories included in the set according • to relevant standards and requirements.• The flexible and versatile design, in addition to a produc • tive assembly layout, ensure the correct proper operation • of the set.
Para lograr el funcionamiento adecuado según lo especificado y obtener una eficiencia productiva, consulte a nuestro Departamento Técnico. To achieve proper operation according to specifications and to obtain production efficiency, please contact our Technical Department.
VÁLVULAS ESFÉRICAS INTEGRALESDE ACERO AL CARBONOCARBON STEEL INTEGRAL BALL VALVES
UNIÓN DOBLE DOUBLE UNION
VÁLVULA DE RETENCIÓN CLAPETA ROSCADATHREADED SWING CHECK VALVE
VÁLVULAS ESFÉRICAS DE ACERO INOXIDABLESTAINLESS STEEL BALL VALVES
Esquema de Conjunto Petrolero según Especificación Oil Set Scheme according to Specification
JUNTA MONOLÍTICAMONOLITHIC SEAL
Conjuntos Petroleros y AccesoriosOil Sets and Accessories
Características Principales• Diámetros disponibles 1½” y 2”.• Extremos roscados NPT, BSPT, BSP y para soldar SW, BW.• Materiales externos en acero al carbono WCB / A105 y acero inoxidable• CF8/CF8M/316.• La tapa abulonada permite un simple mantenimiento y reemplazo de filtro.• Normas de diseño ASME B16.34 - ASME B1.20.1 - BS 21.• Presiones de trabajo ASME 900 / 1500. • Limpieza simple y reemplazo de componentes sin necesidad de trasladar• el filtro del campo.
Características Principales• Series ASME 150, 300 y 600.• Temperatura de trabajo desde -20 ºC a 140 ºC.• Resistencia eléctrica en aire a 1000 VCC mayor a 50 MΩ.• Tensión de ensayo de perforación 5000 V a 50 Hz durante 1 minuto.
Características Principales• Diámetros disponibles de 2” a 6”, norma API 3000 / 6000.• Tuerca construída en acero al carbono forjado ASTM A105 / A216 WCB.• Bujes en acero al carbono y acero inoxidable.• Superficie tratada con procesos de galvanoplastía.• Extremos roscados NPT o BSPT y para soldar SW, BW.
Main Features• Available sizes 1½” y 2”.• Threaded ends NPT, BSPT y BSP. • WCB / A105 carbon steel and CF8/CF8M/316 stainless steel• external materials.• Bolted cap allows for simple filter maintenance and replacement.• ASME B16.34 - ASME B1.20.1 - BS 21 design standards.• Working pressures ASME 900 / 1500. • Simple cleaning and parts replacement without moving the filter • from the field.
Main Features• Available sizes 2” to 6”, API 3000 / 6000 standard.• ASTM A105 / A216 WCB forged carbon steel nut.• Carbon steel and stainless steel bushings.• Surface treated with electroplating processes.• Threaded ends NPT or BSPT and welding ends SW, BW.
Unión Doble UniversalUniversal Double Union
Filtro YY Filter
Junta MonolíticaMonolithic Seal
55
Main Features• ASME 150, 300 and 600 series.• Working temperature from -20 ºC a 140 ºC.• Air electrical resistance at 1000 VCC greater than 50 MΩ.• Perforation test voltage 5000 V a 50 Hz for 1 minute.
SELLO SECUNDARIO (METAL-METAL)SELLO PRIMARIO (ELASTÓMERO)SECONDARY SEAL (METAL-METAL), PRIMARY SEAL (ELASTOMER)
ROSCA ACMEACME THREAD
EXTREMOS BW / SW(ASME B16.11)EXTREMOS ROSCADOS (ASME B1.20.1, BS 21 O API LP )BW ENDS (ASME B16.11)THREADED ENDS (ASME B1.20.1, BS 21 O API LP )
BUJE AISLANTEINSULATING BUSHING
PROTECCION DE COMPONENTES AISLANTESINSULATING COMPONENTS PROTECTION
EXTREMO DE CONEXIÓNCONNECTION END
MALLA DE FILTROFILTER MESH
JUNTA ESPIRALADACOIL SEAL
CUERPO CON EXTREMOS ROSCADOS Y PARA SOLDARBODY WITH THREADED AND WELDING ENDS
Esquema de FuncionamientoOperating Scheme
Union Doble a GolpeDouble Blow Union
Características Principales• Diámetros disponibles de 1” a 6”, • norma API 3000 / 6000 / 10000 / 15000.• Tuerca construída en acero al carbono forjado • ASTM A105 / A216 WCB / SAE 1020-1045.• Bujes en acero al carbono y acero inoxidable.• Superficie tratada con procesos de galvanoplastía.• Extremos roscados NPT o BSPT y para soldar SW, BW.
Main Features• Available sizes 1” to 6”, API 3000 / 6000 / 10000 / 15000.• ASTM A105 / A216 WCB /SAE 1020-1045 forged• carbon steel nut.• Carbon steel and stainless steel bushings.• Surface treated with electroplating processes.• Threaded ends NPT or BSPT and welding ends SW, BW.
Componentes PrincipalesMain Components
Parte / Part
1
2
3
Tuerca / Nut
Sello / Seal
Buje / Bushing
Acero al CarbonoCarbon Steel
B
56
A
1
SELLO SECUNDARIO (METAL-METAL)SELLO PRIMARIO (ELASTÓMERO)SECONDARY SEAL (METAL-METAL), PRIMARY SEAL (ELASTOMER)
ROSCA ACMEACME THREAD
EXTREMOS BW / SW(ASME B16.11)EXTREMOS ROSCADOS (ASME B1.20.1, BS 21 O API LP )BW ENDS (ASME B16.11)THREADED ENDS (ASME B1.20.1, BS 21 O API LP )
#150
DN 1"
DN 1½"
DN 2"
DN 3"
DN 4"
DN 6"
mm Nxm G/min Kg
DiametroDiameter
99
139
161
185
250
308
-
-
193
231
286
-
34.3
49.2
61.7
90.3
115.7
169.7
12.5
12.5
16
16
19
19
mm
28
40
52
79
100
154
-
-
42.8
58.4
80
-
-
-
38.1
58.4
80
-
30.4
48.3
60.3
88.9
114.3
168.3
-
-
135
148
208
-
-
-
127
146
144
-
-
-
145
140
182
-
24.3
38.1
49.2
73.6
97.2
146.3
A
API3000
API10000
API15000
B C D F
E
API3000
API6000
API10000
API15000
69
79
90
115
129
183
-
-
184
235
260
-
API3000
API10000
API15000
L
API6000
API3000
-
-
42.8
66.6
87.3
131.8
-
-
184
235
260
-
Características TécnicasTechnical Features
Diametro NominalNominal Diameter
PasajePort
Normas de DiseñoDesign Norms
SeriesClass
ExtremosEnds
Materiales
1” a 6”1” to 6”
TotalFull Bore
ASME B16.11 - ASME B16.25 - ASME B1 .20.1 - BS 21
API 3000/6000/10000/15000
Roscados NPT, BSPT / Para soldar SW, BW Extendidos para soldar SW, BWThreaded NPT, BSPT / Welding SW, BW Extended for Welding SW, BW
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Dimensiones para Uniones Dobles API 3000 / 6000 / 10000 / 15000Double Union Dimensions API 3000 / 6000 / 10000 / 15000
ASTM A105 - ASTM A216 WCBSAE 1020/1045
Nitrilo / Nitrile
ASTM A105
ASTM A105 - ASTM A216 WCBSAE 1020/1045
Nitrilo / Nitrile
ASTM A276 Gr.316/Gr.304ASTM A351 CF8M
Acero InoxidableStainless Steel
2
3
DFE
D
L
C
Extremo SW / SW EndExtremo BW / BW End
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes principales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
57
Válvulas de RetenciónCheck Valves
ContenidoVálvula de Clapeta BridadaVálvula de Clapeta RoscadaVálvula de Clapeta Roscada BS800
ContentsFlanged Swing Check ValveThreaded Swing Check ValveBS800 Threaded Swing Check Valve
585960
Válvula de Retención Clapeta BridadaFlanged Swing Check Valve
Características Principales• Presencia de un sello de elastómero que asegura el cierre • estanco de la válvula en bajas presiones hasta 200°C.• El grado de libertad de la clapeta permite ensamblar la • válvula asegurando un óptimo contacto de sello entre • esta y el asiento.• Diseño antifuego según ISO 10497/API 607.• Para temperaturas por encima de los 200°C, el diseño del •cierre es metal-metal.• Los 360º de libertad de la clapeta, aseguran un óptimo contacto de sello entre esta y el asiento.
Características TécnicasTechnical Features
Diametro NominalNominal Diameter
PasajePort
Normas de DiseñoDesign Norms
SeriesClass
ExtremosEnds
Materiales ExternosExternal Materials
Materiales InternosInternal Materials
2” a 8”2” to 8”
TotalTotal
ASME B16.34 - API 598 - ASME B16.10ASME B16.5 - ASME B1.20.1
ASME 150 / 300 / 600
Bridados RF, RJ, FFFlanged RF, RJ, FF
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Main Features• Presence of an elastomer seal that ensures the tight seal • of the valve at low pressures up to 200°C.• The grade of freedom of the clapper allows the valve to be • assembled, ensuring an optimum seal contact between • the clapper and the seat.• Fire-safe design according ISO 10497/API 607.• For temperatures above 200 °C the design of the closure • is metal-metal.• All 360° freedom of the swing ensure optimal sealing • contact between the latter and the seat.
58
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
10
Cuerpo / Body
Bonete / Bonnet
Clapeta / Swing
Asiento / Seat
Perno Clapeta / Swing Bolt
Sello de Bonete / Bonnet Seal
Sello de Asiento / Seat Seal
O-ring de Asiento / Seat O-ring
Espárrago / Stud
Tuerca / Nut
ASTM A216 WCB
ASTM A105 - ASTM A216WCB
ASTM A479 Tipo 316 - A351 CF8M
ASTM A479 Tipo 316
ASTM A479 Tipo 316
Nitrilo - Viton® - EPDM - Grafito
Nitrilo - Viton® - EPDM - Grafito
Nitrilo - Viton® - EPDM
ASTM A193 Gr. B7
ASTM A194 Gr. 2H
Acero al Carbono / Carbon Steel
ASTM A351 CF8M / CF8
ASTM A479 Tipo 316
ASTM A479 Tipo 316 - A351 CF8M
ASTM A479 Tipo 316
ASTM A479 Tipo 316
Nitrilo - Viton® - EPDM - Grafito
Nitrilo - Viton® - EPDM - Grafito
Nitrilo - Viton® - EPDM
ASTM A193 Gr. B8M
ASTM A194 Gr. 8M
Acero Inoxidable / Stainless Steel
1
4 7 8 3
29105 6
BUJE Y CLAPETA CONSTRUIDOS EN UNA SOLA PIEZASWING AND HINGE PIN ONE-PIECE CONSTRUCTION
ASIENTO REGULABLEADJUSTABLE SEAT
SELLO DE ELASTÓMERO QUE ASEGURA EL CIERREESTANCO DE LA VÁLVULAEN BAJAS PRESIONESELASTOMERIC SEAL ENSURES TIGHT CLOSING OF THE VALVEAT LOW PRESSURES
mm Nxm G/min Kg
DiámetroSize
50
75
101
152
203
50
75
101
152
203
120.7
152.4
190.5
241.3
298.5
127
168.3
200
269.9
330.2
4x19
4x19
8x19
8x22
8x22
8x19
8x22
8x22
12x22
12x25
mm
ØP B NC AF/AJ
B
C
N
ØP
AF / AJ
150
190
230
280
345
165
210
255
320
380
203/216
241/254
292/305
356/368
495/508
267/283
292/308
356/371
445/460
533/549
S150
S300
2”
3”
4”
6”
8”
Ø
2”
3”
4”
6”
8”
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes prin- cipales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
Válvula de Retención Clapeta RoscadaThreaded Swing Check Valve
Características Principales• Presencia de un sello de elastómero que asegura al cierre • estanco de la válvulas en bajas presiones.• La regulación del asiento permite ensamblar la válvula • asegurando un óptimo contacto de sello entre este y la •clapeta.• La clapeta construida en una sola pieza confiere mayor •presición en el cierre y mayor seguridad.
Características TécnicasTechnical Features
Diametro NominalNominal Diameter
PasajePort
Normas de DiseñoDesign Norms
SeriesClass
ExtremosEnds
Materiales ExternosExternal Materials
Materiales InternosInternal Materials
2” y 3”2” and 3”
TotalTotal
API 600 - ASME B16.34
ASME 600 / 900
Roscados: NPT - BSPT - BSP / Para soldar: SW - BW Threaded: NPT - BSPT - BSP / Welding: SW - BW
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Acero al Carbono, Acero InoxidableCarbon Steel, Stainless Steel
Main Features• Elastomeric seal ensures tight closing of the valve at • low pressures.• Seat adjustment enables valve assembly ensuring optimal • contact between seal and swing.• One-piece construction swing provides greater closing • precision and safety.
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
Cuerpo / Body
Bonete / Bonnet
Sello de Bonete / Bonnet Seal
Clapeta / Swing
Asiento / Seat
Perno Clapeta / Swing Bolt
O-ring de Asiento / Seat O-ring
Sello de Asiento / Seat Seal
ASTM A216 WCB
ASTM A105
Nitrilo - EPDM - Viton®
ASTM A351 CF8M / CF8
ASTM A479 Tipo 316
ASTM A479 Tipo 316
Nitrilo - EPDM - Viton®
Nitrilo - EPDM - Viton®
Acero al Carbono / Carbon Steel
ASTM A351 CF8M / CF8
ASTM A479 Tipo 316
Nitrilo - EPDM - Viton®
ASTM A351 CF8M / CF8
ASTM A479 Tipo 316
ASTM A479 Tipo 316
Nitrilo - EPDM - Viton®
Nitrilo - EPDM - Viton®
Acero Inoxidable / Stainless Steel
59
4
7
8
36
5
2
1
280
260
240
220
200
180
160
140
120
100
80
Temperatura / Temperature (ºC)
Pre
sión
/ P
ress
ure
(bar
)
900
600
Curva de Presión / TemperaturaPressure / Temperature Rating
0 50 100 150 200
BUJE Y CLAPETA CONSTRUIDOS EN UNA SOLA PIEZASWING AND HINGE PIN ONE-PIECE CONSTRUCTION
ASIENTO REGULABLEADJUSTABLE SEAT
SELLO DE ELASTÓMERO QUE ASEGURA EL CIERREESTANCO DE LA VÁLVULAEN BAJAS PRESIONESELASTOMERIC SEAL ENSURES TIGHT CLOSING OF THE VALVEAT LOW PRESSURES
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes prin- cipales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
Válvula de Retención Clapeta Roscada BS800BS800 Threaded Swing Check Valve
Características Principales• Diametros disponibles entre 1/2" a 2".• Paso reducido.• Extremos roscados según ASME B1.20.1.• Serie BS 800 para 2000 PSI.• Asiento y disco en acero inoxidable.• Cierre metal-metal.• Diseñada de acuerdo a API 602.
Main Features• Diameters available between 1/2" and 2".• Reduced bore.• Threaded ends according to ASME B 1.20.1.• BS 800 Series to 2000 psi.• Stainless steel seats and obturators.• Metal-metal closure.• Designed in accordance with API 602.
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
Cuerpo / Body
Asiento / Seat
Disco / Disk
Leva / Draft
Tuerca / Nut
Eje / Shaft
Tapa / Body Connector
Tornillo / Bolt
Junta / Gasket
ASTM A105 / ASTM A182 F316
Acero Inoxidable / Stainless Steel
Acero Inoxidable / Stainless Steel
ASTM A105 / ASTM A182 F316
ASTM A194 8
Acero Inoxidable / Stainless Steel
ASTM A105 / ASTM A182 F316
Acero al Carbono-Acero Inoxidable / Carbon Steel-Stainless Steel
SS316 + Grafito / SS316 + Graphite
Material / Material
½”
¾”
1”
1½”
2”
mm Nxm G/min Kg
DiámetroSize
79
92
111
120
140
105
13.5
18
26
36.5
61
61
78
84
120
mm
L Ød H
H
60
8
L
7
9
6
4
3
2
1
5
Ød
NPTNOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes prin- cipales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
EXTREMOS ROSCADOS SEGÚN ASME B1.20.1THREADED ENDS ACCORDING TO ASME B 1.20.1
DISEÑADA DE ACUERDO A API 602DESIGNED IN ACCORDANCE WITH API 602
CIERRE METAL-METALMETAL-METAL CLOSURE
61
Válvulas EsclusaGate Valves
ContenidoVálvula Esclusa de Asientos ParalelosVálvula Esclusa BridadaVálvula Esclusa Roscada
ContentsParallel Seat Gate ValveFlanged Gate Valve Threaded Gate Valve
626364
Válvula Esclusa de Asientos ParalelosSeal Parallel Slide Gate Valve
Características Principales• Diametro nominal desde 2 16" a 4 16".• Diseñada bajo normas API 6A.• Series 2000, 3000 y 5000 psi.• Pasaje total y reducido.• Extremos bridados y roscados.• Operación a través de volante.• Construidas en acero al carbono o acero inoxidable.• Al ser bidirecional, se puede extraer la esclusa y los asien-• tos y volverlos a colocar invertidos para que el fluido ata-• que al lado menos exigido, logrando una mayor vida útil.• Mantenimiento: simple limpieza y reemplazo de compo-• nentes sin necesidad de transladar la válvula de el campo.
Main Features• Nominal size from 2 ” to 4 ”.• Designed under API 6A standards.• 2000, 3000 y 5000 psi series.• Full and reduced port.• Flanged and threaded ends.• Handwheel operation.• Carbon steel or stainless steel construction.• Bidirectional valve allows for gate and seats to be• removed and inverted so that fluid flows in the opposite• direction for longer service life.• Maintenance: simple cleaning and parts replacement• without moving the valve from the field.
Componentes PrincipalesMain Components
PartePart
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Cuerpo / Body
Bonete / Bonnet
Cuña / Wedge
Vastago / Stem
Asiento / Seat
Volante / Handwheel
Tuerca Prensa / Gland Nut
Porta O´ring / O-ring Holder
Arandela Vastago / Stem Packing
Arandela Vastago / Stem Packing
Rodamiento Axial / Axial Bearing
Sello O-ring Vastago / Stem O-ring Seal
Arandela / Packing
Sello O-ring Bonete / O-ring Seal Bonnet
Chapa Guia / Guide Plate
Sello O-ring Asiento / O-ring Seal Seat
Arandela Platillo / Disk Spring
ASTM A216 WCB - 60K
ASTM A105
ASTM A479 316
ASTM A479 316
ASTM A479 316
ASTM A106 Gr B
ASTM A105
ASTM A105
PTFR
Grafito Flexible
Estandar
Nitrilo-EPDM-Viton®
PTFR
Nitrilo-EPDM-Viton®
ASTM A240 317
Nitrilo-EPDM-Viton®
SAE 1070
Acero al CarbonoCarbon Steel
1 3 4
10
8
14
79
Curva de Presión / TemperaturaPressure / Temperature Rating
-20 0 20 40 60 80 100 120 140 160 180 200
550
500
450
400
350
300
250
200
150
100
50
Temperatura / Temperature (ºC)
Pre
sión
/ P
ress
ure
(bar
)
1500
2500
62
ASTM A351 CF8M
ASTM A479 316
ASTM A479 316
ASTM A479 316
ASTM A479 316
ASTM A106 Gr B
ASTM A479 316
ASTM A479 316
PTFR
Grafito Flexible
Estandar
Nitrilo-EPDM-Viton®
PTFR
Nitrilo-EPDM-Viton®
ASTM A240 317
Nitrilo-EPDM-Viton®
AISI 301
Acero InoxidableStainless Steel
6
112
12
9
13
16 1517 5
CUERPO EN ACERO AL CARBONO O ACERO INOXIDABLECARBON STEEL ORSTAINLESS STEEL BODY
EXTREMOS BRIDADOSFLANGED ENDS
EXCLUSAGATE
VOLANTEHANDWHEEL
GUÍAS DE ESCLUSA PARAÓPTIMO FUNCIONAMIENTOGATE GUIDES FOR OPTIMAL PERFORMANCE
VÁSTAGO COMPLEMENTADO CON SELLOS QUE ASEGURA EL CIERRE ESTANCO DE LA VÁLVULASUPPLEMENTED STEM WITH SEALS ENSURESTIGHT CLOSING OF THE VALVE
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes prin- cipales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
Características Principales• Diámetros disponibles entre 2” a 8”.• Cuerpo de acero fundido ASTM A216 WCB.• Extremos bridados RF.• Trim 8 en HF, 13Cr, F6a, 410.• Diseñadas de acuerdo a ASME B16.34 / API 600• ASME B16.20 - ASME B16.5 y ASME B16.25.• Serie ASME 150.
Main Features• Available sizes from 2” a 8”.• Body of cast steel ASTM A216 WCB.• Flanged ends RF.• Trim 8 on HF, 13Cr, F6a, 410.• Designed in accordance with ASME 16.34 - BS 1873• ASME B16.20 - ASME B16.5 and ASME B16.25.• ASME 150 series.
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Cuerpo / Body
Anillo de Asiento / Seat Ring
Cuña / Wedge
Vástago / Stem
Junta / Gasket
Bonete / Bonnet
Tuercas de Bonete / Bonnet Bolt Nuts
Tornillo de Bonete / Bonnet Bolts
Buje de Asiento / Backseat Bushing
Empaquetadura de Vástago / Stem Packing
Pernos de Cáncamo / Eye Bolts Pins
Prensa de Cáncamo / Gland Eye Bolts
Prensa / Gland
Brida de Prensa / Gland Flange
Tuercas de Cáncamo / Eye Bolts Nuts
Engrasador / Grease Nipple
Tuerca de Vástago / Stem Nut
Tuerca de Retención / Retaining Nut
Volante / Handwheel
ASTM A216 Gr WCB
ASTM A105 + Stellite® Faced
ASTM A216 Gr WCB + 13Cr Faced
ASTM A182 Gr F6A
Soft Iron + Graphite
ASTM A216 Gr WCB
ASTM A194 Gr 2H
ASTM A194 Gr B7
ASTM A276 Type 410
Braided Graphite & Die Formed Graphite Ring
Carbon Steel
ASTM A307 Gr B
ASTM A276 Type 410
ASTM A216 Gr WCB
ASTM A194 Gr 2H
Carbon Steel
ASTM A439 Gr D-2
Carbon Steel
Ductile Iron
Material / Material
2”
2½”
3”
4”
6”
8”
mm Nxm G/min Kg
178
191
203
229
267
292
DiámetroSize
L
216
241
283
305
403
419
191
203
216
241
279
305
200
200
250
250
350
350
17
23
29
47
80
129
mm
PesoWeight
Kg
L1 L2 W
63
Válvula Esclusa BridadaFlanged Gate Valve
389
439
500
595
777
975
H
Curva de Presión / TemperaturaPressure / Temperature Rating
10 50 100 150 200 250 300 350 400
21
20
19.6
19.2
17.7
15.8
14
12.1
9.7
7.2
5.1
Temperatura / Temperature (ºC)
Pre
sión
/ P
ress
ure
(bar
)
150
-15
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
H
L
W
L1 L2
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes prin-cipales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
Válvula Esclusa RoscadaThreaded Gate Valve
Características Principales• Diámetros disponibles entre ¼” a 2”.• Paso reducido.• Cuerpo de acero al carbono ASTM A105.• Extremos roscados NPT, BSPT o SW.• Trim en 410 o 316 + Stellite®.• Serie BS 800 para 2000 psi.• Diseñadas de acuerdo a ASME B16.34 / API 602.
Main Features• Available sizes from ¼” a 2”.• Reduced bore.• Body of carbon steel ASTM A105.• Threaded ends NPT, BSPT or SW.• Trim on 410 or 316 + Stellite®.• BS 800 Series to 2000 psi.• Designed in accordance with ASME B16.34 / API 602.
H
64
w
14
15
10
8
9
6
2
7
3
5
4
L
16
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Cuerpo / Body
Tapa / Body Connector
Vástago / Stem
Cuña / Wedge
Anillo de Asiento / Seat Ring
Tuerca / Nut
Junta / Gasket
Prensa / Gland
Empaquetaduras / Packing
Brida Prensa / Gland Flange
Tornillo Prensa / Gland Bolt
Tuerca Prensa / Gland Nut
Perno / Pin
Manga / Sleeve
Arandela de Manga / Sleeve Washer
Volante / Handwheel
Tuerca de Volante / Handwheel Nut
ASTM A105
ASTM A105
AISI 410 / AISI 316
F6
F6-HFS
B7
304 + Grafito / 304 + Graphite
F6
Grafito / Graphite
WCB
B7
2H
AISI 410
AISI 410
AISI 410
A197
A108-1020
Material / Material
½”
¾”
1”
1¼”
1½”
2”
mm Nxm G/min Kg
DiámetroSize
79
92
111
120
120
140
166
169
193
230
246
283
100
100
125
160
160
180
2.1
2.3
4
5.9
6.9
11.2
mm
PesoWeight
Kg
L H W
17
1
11
12
13
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes prin-cipales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
65
Válvulas de RegulaciónControl Valves
ContenidoVálvula Globo Roscada Válvula Globo Bridada
ContentsThreaded Ball ValveFlanged Ball Valve
6667
Válvula Globo RoscadaThreaded Globe Valve
Características Principales• Diámetros disponibles entre ¼” a 2”.• Paso reducido.• Cuerpo de acero al carbono ASTM A-105.• Extremos roscados NPT, BSPT o SW.• Trim en 410 o 316 + Stellite®.• Serie BS 800 para 2000 psi.• Diseñadas de acuerdo a ASME B16.34 / API 602.
Main Features• Available sizes from ¼” a 2”.• Reduced bore.• Body of carbon steel ASTM A 105.• Threaded ends NPT, BSPT or SW.• Trim on 410 or 316 + Stellite®.• BS 800 Series to 2000 psi.• Designed in accordance with ASME B16.34 / API 602.
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Cuerpo / Body
Bonete / Bonnet
Vástago / Stem
Cuña / Wedge
Tornillo de Bonete / Bonnet Bolt
Junta / Gasket
Prensa / Gland
Empaquetaduras / Packing
Brida Prensa Estopa / Gland Flange
Espárrago Prensa / Gland Bolt
Tuerca Prensa / Gland Nut
Espárrago Prensa Pin / Gland Bolt Pin
Manga / Sleeve
Volante / Handwheel
Arandela de Volante / Handwheel Washer
Tuerca de Volante / Handwheel Nut
ASTM A105
ASTM A105
AISI 410 / AISI 316
AISI 410 / AISI 316 + Stellite®
ASTM A193 Gr 87
304 + Grafito / 304 + Graphite
F6
Grafito / Graphite
WCB
ASTM A193 Gr B7
ASTM A194 Gr 2H
AISI 410
AISI 410
A197
A108 - 1020
ASTM A194 Gr 2H
Material / Material
½”
¾”
1”
1¼”
1½”
2”
mm Nxm G/min Kg
DiámetroSize
79
92
111
130
152
172
176
176
212
230
254
294
100
100
125
160
160
180
1.9
1.9
3.9
5.8
7.2
10.8
mm
PesoWeight
Kg
L H W
H
66
w
10
11
12
13
14
9
7
8
5
2
6
3
4
1
L
15 16
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes prin- cipales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
L
H
67
Válvula Globo BridadaFlanged Globe Valve
Componentes PrincipalesMain Components
Parte / Part
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Cuerpo / Body
Anillo de Asiento / Seat Ring
Cuña / Wedge
Disco de Plato / Disk Thrust Plate
Tuerca de Disco / Disk Nut
Vástago / Stem
Tuercas de Bonete / Bonnet Bolt Nuts
Tornillo de Bonete / Bonnet Bolts
Junta / Gasket
Buje de Asiento / Backseat Bushing
Empaquetadura de Vástago / Stem Packing
Bonete / Bonnet
Pernos de Cáncamo / Eye Bolts Pins
Prensa / Gland
Brida de Prensa / Gland Flange
Prensa de Cáncamo / Gland Eye Bolts
Tuercas de Cáncamo / Eye Bolts Nuts
Horquilla de Buje / Yoke Bush
Buje / Screw
Volante / Handwheel
ASTM A216 Gr WCB
ASTM A105 + Stellite® Faced
ASTM A105 + 13Cr Faced
ASTM A276 Type 420
ASTM A276 Type 410
ASTM A186 Gr F6a
ASTM A194 Gr 2H
ASTM A193 Gr B7
Soft Iron + Graphite
ASTM A276 Type 410
Braided Graphite & Die Formed Graphite Ring
ASTM A216 Gr WCB
Carbon Steel
ASTM A276 Type 410
ASTM A216 Gr WCB
ASTM A307 Gr B
ASTM A194 Gr 2H
ASTM A439 Gr D-2
Carbon Steel
Ductile Iron
Material / Material
2”
2½”
3”
4”
6”
8”
mm Nxm G/min Kg
203
216
241
292
406
495
DiámetroSize
L
203
216
241
292
406
495
216
229
254
305
419
508
200
200
250
300
350
450
22
32
38
62
104
159
mm
PesoWeight
Kg
L1 L2 W
345
415
405
485
520
600
H
Características Principales• Diámetros disponibles entre 2” a 8”.• Cuerpo de acero fundido ASTM A216 WCB.• Extremos bridados RF.• Trim 8 en HF, 13Cr, F6a, 410.• Diseñadas de acuerdo a ASME 16.34 - BS 1873• ASME B16.20 - ASME B16.5 y ASME B16.25. • Serie ASME 150.
Main Features• Available sizes from 2” a 8”.• Body of cast steel ASTM A216 WCB.• Flanged ends RF.• Trim 8 on HF, 13Cr, F6a, 410.• Designed in accordance with ASME 16.34 - BS 1873• ASME B16.20 - ASME B16.5 and ASME B16.25.• ASME 150 series.
Curva de Presión / TemperaturaPressure / Temperature Rating
10 50 100 150 200 250 300 350 400
21
20
19.6
19.2
17.7
15.8
14
12.1
9.7
7.2
5.1
Temperatura / Temperature (ºC)
Pre
sión
/ P
ress
ure
(bar
)
150
-15
L1 L2
W
NOTA: Para configuraciones de válvula con materiales que no se encuentren en este cuadro de componentes prin- cipales, consultar a nuestro Departamento Técnico.NOTE: For settings of valves with materials that are not in this main components table, see our Technical Department.
68
Gracias a la capacidad de almacenaje, la estrategia de stock y la planificación productiva, VALMEC fabrica toda su línea de productos brindando a los clientes el mejor plazo de entrega con la logística desarro-llada para su comodidad.
Área de Almacén y Logística
Thanks to the storage capacity, the stock strategy and the productive planning, VALMEC manufactures its entire line of products provi-ding clients with the best delivery deadline, with logistics developed for their convenience.
Warehouse and Logistics Area
69
Información TécnicaTechnical Information
ContenidoInformación TécnicaTabla de Compatibilidad Química Normas Aplicables
ContentsTechnical InformationChemical Resistance TableApplicable Standards
707172
i
Ds
Ps
Información Técnica Technical Data
Extremos BridadosFlanged Ends
#150
¼”
¾”
½”
¾”
1”
1¼”
1½”
2”
2½”
3”
4”
mm Nxm G/min Kg
SCH 5S
De
13.7
17.1
21.3
26.7
33.4
42.2
48.3
60.3
73
88.9
114.3
Di
-
-
18.30
23.37
30.40
38.90
45
57
68.78
84.68
110.1
Di
10.41
13.84
17.02
22.45
28.86
36.66
42.76
56.76
66.90
82.80
108.2
e
1.65
1.65
2.11
2.11
2.77
2.77
2.77
2.77
3.05
3.05
3.05
Di
9.25
12.52
15.8
20.93
26.64
35.05
40.89
52.5
62.71
77.93
102.28
e
2.24
2.31
2.77
2.87
3.38
3.56
3.86
3.91
5.16
5.49
6.02
Di
7.67
10.74
13.87
18.85
24.31
31.71
38.10
49.25
59
73.66
97.18
e
3.02
3.20
3.73
3.91
4.55
4.85
5.08
5.54
7.01
7.62
8.56
e
-
-
1.65
1.65
1.65
1.65
1.65
1.65
2.11
2.11
2.11
Di
-
-
11.78
15.54
20.70
21.46
33.96
42.85
53.97
66.65
87.32
mm
e
-
-
4.76
5.56
6.35
6.35
7.14
8.74
9.52
11.13
13.49
e
-
-
7.47
7.82
9.09
9.70
10.16
11.07
14.02
15.24
17.12
Di
-
-
6.40
11.02
15.21
22.76
27.94
38.18
44.98
58.40
80.06
Butt Weld ASME B16.25
DN
SCH 10S SCH 40 SCH 80 SCH 160 SCH XXS
Extremos para SoldarButt Welding Ends
#150
¼”
½”
¾”
¾”
1”
1¼”
1½”
2”
mm Nxm G/min Kg
Hilos porPulgadaThreadsper Inch
13.7
17.1
17.1
26.7
33.4
42.2
48.3
60.3
mm
NPT
Extremos RoscadosThreaded Ends
18
18
14
14
11½
11½
11½
1½
1.411
1.411
1.814
1.814
2.206
2.208
2.208
2.208
5.08
6.09
8.13
8.61
10.16
10.67
10.67
11.07
10.21
10.36
13.56
13.87
17.35
17.96
18.39
14.48
15.1
15.25
19.85
20.15
25
25.62
26.04
26.87
DDN
BSPT
mm
PasoPitch A B C
Hilos porPulgadaThreadsper Inch
DPasoPitch A B C
13.7
17.1
17.1
26.7
33.4
42.2
48.3
60.3
19
19
14
14
11
11
11
11
1.337
1.337
1.814
1.814
2.309
2.309
2.309
2.309
6
6.4
8.2
9.5
10.4
12.7
12.7
15.9
9.3
9.7
12.7
14.1
16.2
18.5
18.5
22.8
11
11.4
15
16.3
19.1
21.4
21.4
25.7
mm mm mm mm mm
¼”
¾”
½”
¾”
1”
1¼”
1½”
2”
2½”
3”
4”
DS
Min
14.2
17.6
21.8
27.2
33.9
42.7
48.8
61.2
73.9
89.8
115.2
mm
Socket Weld ASME B16.11
DN Max
14.6
18
22.2
27.6
34.3
43.1
49.2
61.7
74.4
90.3
115.7
Ps
9.5
9.5
9.5
12.5
12.5
12.5
12.5
16
16
16
16
Butt Weld
Socket Weld
½”
¾”
1”
1¼”
1½”
2”
2½”
3”
4”
6”
8”
10”
12”
mm Nxm
-
-
15
17
19
22
25
29
36
43
49
52
56
mm
Tabla de Anillos para Bridas RJRings for RJ Flanges
11
13
16
18
20
23
26
31
37
45
49
53
57
11
13
16
18
20
23
26
31
37
45
49
53
57
12
14
16
18
20
24
27
31
37
45
49
53
57
12
14
16
18
20
24
27
35
39
46
50
54
58
150DN 900 1500300 600
RoscaThread
Rayado de BridasFlange Facing Finish
Flat Face Ring JoinRaise Face
D
Ds
Ps
37,5º
Di
De
1.6
mm
A
B
C
Stock Finish Stock Finish
R 1.6 mm
0.06
mm
0.8 mm
Smooth Finish
ESPIRAL CONTINUA O FONOGRÁFICOSPIRAL SERRATED OR PHONOGRAPHIC
Smooth Finish
1.2 mmR 3.2 mm
0.1
mm
0.8 mm
0.4
mm
90º
70
Tabla de Compatibilidad QuímicaChemical Compatibility Table
Fluido / Fluid
Aire / AirAcetona / AcetoneAcetileno / AcetyleneÁcido Acético / Acetic AcidÁcido Bórico / Boric AcidÁcido Butírico / Butyric AcidÁcido Carbónico / Carbonic AcidÁcido Crómico / Chromic AcidÁcido Cloroacético / Chloroacetic AcidÁcido Clorosulfónico (Seco) / Clorosulfonic Acid (Dry) Ácido Fórmico / Formic AcidÁcido Gálico / Galic Acid Ácido Bromhídrico / Hydrobromic AcidÁcido Clorhídrico / Hydrochloric Acid Ácido Cianhídrico / Hydrocianic Acid Ácido Fluorhídrico / Hydrofluoric Acid Ácido Láctico / Lactic AcidÁcido Maleico / Maleic AcidÁcido Muriático / Muriatic Acid Ácido Nicotínico / Nicotinic AcidÁcido Nítrico 80% / Nitric Acid 80% Ácido Nitroso 10% / Nitrous Acid 10%Ácido Oleico / Oleic AcidÁcido Oxálico / Oxalic Acid Ácido Palmítico / Palmitic Acid Ácido Fosfórico 50% / Phosphoric Acid 50% Ácido Ftálico / Phthalic AcidÁcido Pirogálico / Pyrogallol Ácido Salicílico / Salicylic AcidÁcido Sulfúrico 50% / Sulphuric Acid 50%Ácido Sulfuroso / Sulphurous AcidÁcido Tánico / Tannic AcidÁcido Tartárico / Tartaric AcidAgua Destilada / Destilled WaterAgua de Mar / Sea Water Agua Mineral Ácida / Acid Mineral WaterAgua Carbonatada / Carbonated WaterAlcohol Etílico / Ethyl AlcoholAlcohol Amílico / Amyl Alcohol Alcohol Butílico / Butyl Alcohol Aceite de Castor / Castor Oil Aceite de Coco / Coconut OilAceite de Madera China / Chinese Wood OilAceite de Cocina / Edible Vegetable OilAceite de Maíz / Corn OilAceite de Creosota / Creosote OilAceite Crudo Agrio / Crude Oil (Sour)Aceite Seco / Drying OilAceite de Pescado / Fish OilAceite Lubricante / Lubricating OilAceite de Soja / Soybean OilAceite Vegetal / Vegetable OilAlquitrán / TarAmoníaco Anhidro / Anhydrous AmmoniaHidróxido de Amonio / Ammonium HydroxideAmoníaco Solución / Ammonia SolutionAnilina / AnilineAcetato de Plomo / Lead AcetateAcetato Metílico / Methyl AcetateAcetona Metílica / Methylic AcetoneAcetato de Sodio / Sodium AcetateAlmidón / StarchAzufre / SulphurAnhídrido Sulfúrico / Sulphuric AnhidrydeBicarbonato de Amonio / Ammonium BicarbonateBenceno / BenzeneBromo (Seco) / Bromine (Dry)Bromo (Húmedo) / Bromine (Wet)Butano / ButaneBisulfato de Calcio / Calcium Bisulphate
■ Excelente / Excellent■ Bueno / Good■ Regular / Regular■ No Recomendable / Not Recommended
A B C D E F G H I J Fluido / Fluid
Bisulfito de Carbón / Carbon BisulphiteBisulfato de Magnesio / Magnesium BisulphateBromuro de Potasio / Potassium BromideBicarbonato de Sodio / Sodium BicarbonateBisulfato de Sodio 10% / Sodium Bisulphate 10%Bisulfito de Sodio 10% / Sodium Bisulphite 10%Borato de Sodio / Sodium BorateBromuro de Sodio 10% / Sodium Bromide 10%Cloruro de Aluminio / Alumminium ChlorideCarbonato de Amonio / Ammonium CarbonateCloruro de Amonio / Ammonium ChlorideCloruro de Bario / Barium ChlorideCarbonato de Bario / Barium CarbonateCarbonato de Calcio / Calcium CarbonateCloruro de Calcio / Calcium ChlorideClorato de Calcio / Calcium ChlorateCloro (Gas) / Chloro (Gas)Cloro (Húmedo) / Chlorine (Wet)Cloroformo (Seco) / Chloroform (Dry) Cloruro de Cobre / Cupper ChlorideCloruro Etílico (Húmedo) / Ethyil Chloride (Wet) Cloruro Ferroso / Ferrous ChlorideCloruro de Magnesio / Magnesium ChlorideCloruro de Mercurio / Mercuric ChlorideCianuro de Mercurio / Mercuric CyanideCloruro de Níquel / Nickel ChlorideCarbonato de Potasio / Potassium CarbonateCloruro de Potasio / Potassium ChlorideCianuro de Potasio / Potassium CyanideClorato de Sodio / Sodium ChlorateCianuro de Sodio / Sodium CyanideCloruro de Zinc / Zinc ChlorideDióxido de Carbono / Carbon DioxideDicromato de Potasio / Potassium Dichromate Éter Etílico / Ethyl EtherEtano / EthaneFlúor (Seco) / Fluorine (Dry)Freón (Seco) / Freon (Dry)Ferricianuro de Potasio / Potasium FerrocyanideFluoruro de Sodio / Sodium FluorineGas Hidrogenado (Frío) / Hydrogenated Gas (Cold)Gas Nitroso / Nitrous GasJugos Cítricos / Citric JuicesNitrato de Arsénico / Arsenic NitrateNitrato de Cobre / Cupper NitrateNitrato Férrico / Ferric NitrateNitrato de Níquel / Nickel NitrateNitrato de Potasio / Potassium NitrateNitrato de Sodio / Sodium NitrateNitrato de Plata / Silver NitrateMercurio / MercuryMetano / MethaneAcetato de Etilo / Ethyl AcetateSulfato de Aluminio / Alumminium SulphateSulfato de Bario / Barium SulphateSulfuro de Bario / Barium SulphideSulfato de Calcio / Calcium SulphateSulfato de Cobre / Cupper SulphateSulfato Férrico / Ferric SulphateSulfuro de Hidrógeno / Hydrogen SulphideSulfato de Potasio / Potassium SulphateSulfito de Potasio / Potassium SulphideSulfato de Sodio / Sodium SulphateSulfito de Sodio / Sodium SulphideSulfato de Zinc / Zinc Sulphate Sal / SaltPropano / PropanePetróleo / PetroleumParafina / ParafinTinta / Ink
A B C D E F G H I J
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■■■■■■■■■■■■■■--■■■-■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■■■■■■■■■■■■■■■■■■■-■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■-■■■■■■■
■■■■■■■■--■■--■■■■■-■■■■■■■■■■■■■■■■■■■■■■■■■■-■■■■■----■■--■■-■■■■■■■
■■■■■■■■■-■■-----■■-■■■■■■■■■■■■■■■■■■■■■■■■■■■-■■■■■■■-■■■■■■--■■■■■■
■■■■■■■■■■■■■■■-■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■■■■■■■■-■■■■■■■■■■-■■■■■■■■■■■■■■■■■■■■■■■■■■-■■■■■----■■--■■--■■--■■
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■■■■■■■■-■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■ -■■■■■■■■■■■■■■■■■■■■■--■■■■■■■■■■■-■■■--■■■■■■■■■■■■■■■■■■■-■■■■■■■■
■ -■■■■■■■■■■■■■■■■■■■■■--■■■■■■■■■■■-■■■■-■■■■■■■■■■■■■■■■■■■-■■■■■■■■
■-■■■■■■■■■■■■■■■-■■-■■--■■■■■■■-■-■--■■--■■■■■■■■■■■■-■■■■■■-■■■■■■■■
■-■■■■■■■■■■■■■■■-■■-■■--■■■■■■■■■-■-■■■--■■■■■■■■■■■■■■■■■■■-■■■■■■■■
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
■-■■■■■■■■■■■■■■■--■-■■--■■■■■■■-■-■--■■--■■■■■■■■■■■■-■■■■■■-■■■■■■■■
Materiales / Materials A Bronce / Bronze B Acero al Carbono / Carbon Steel C Acero Inoxidable 304 / Stainless Steel 304 D Acero Inoxidable 316 / Stainless Steel 316 E Buna-N F Neoprene G Delrin H Viton I PTFE J Nylon
71
Normas AplicablesApplicable Standards
Factores de ConversiónConversions Factors
ASME 150
ASME 300
ASME 600
BSI 800
API 2000
ASME 900
API 3000
ASME 1500
API 5000
ASME 2500
Presión de OperaciónWorkingPressure
bar
19
49.6
99.3
138
138
149
207
248
345
414
ClaseClass
29
76
150
207
276
224
414
372
690
621
21
55
110
152
152
166
228
276
630
455
Kg/cm2
psi
bar
ATM
1
0.070307
1.0197
1.03323
14.22
1
14.5038
14.696
0.980665
0.06895
1
1.01325
Ensayos FinalesLuego del ensamble, las válvulas se ensayan de acuerdo a las normas API 6D, API 598, ASME B16.34 y especificaciones técnicas VALMEC. Requerimientos adicionales pueden ser solicitados por el cliente.
Completion TestsAll valves are tested according to API 6D, API 598, ASME B16.34 and VALMEC technical specifications. Additional requeriments can be specifically requested by the purchaser.
Presiones de Trabajo y Ensayo(-20ºC a 38ºC)Working and Test Pressures (-20ºC a 38ºC)
Prueba de EstanqueidadClosure Test
Test OperacionalOerational Test
Verificación Dimensional Dimensional Control
Verificación de DespachoShipping Control
Ensayo hidrostático de cuerpo y cierre. Ensayo neumático de cierre Shell test pressure, backseat test and pneumatic test
Apertura y cierre / TorqueOpen and close operation / Torque
Verificación de extremos y dimensiones generalesEnds and general dimensions control
Verificación de marcado, requisitos del cliente, identificación y embalaje.Marking, purchase requeriments, identification and packing control
Caída de PresiónPressure Lost
CuerpoShell
EnsayosTests
CierreClosure
PresiónPressure
Kg/cm2 psi bar
Caudal en Galones por MinutoCoeficiente de FlujoDensidad en libras/pie cúbicoDiámetro Interno Cañería en PulgadasCoeficiente de FricciónLongitud de la Cañería en PiesDiámetro interno de la Cañería en Pies
Q =Cv =ρ =d =f =L =D =
Flow Rate in Gallons per Minute Flow CoefficientDensity in Pounds per Cubic FeetInternal Diameter of Pipe in InchesFriction FactorLength of Pipe in FeetInternal Diameter of Pipe in Feet
∆P=
Cv =
K =
( )Q
Cv
2•
ρ6 2.4
29.9 d
√K
2•
•f LD
Specification for flanges and flanged fittings. Specification for Face to Face and End to End dimensions of valves. Specification for forged fittings, socket weldingand threaded. Specification for butt weld ends. Specification for valves with flanged, threaded and welding ends. Pipe threads, general purpose.
Standard finishes for contact faces of pipe flanges and connecting & end flanges of valves and fittings. Standard Marking System for Valves, Fittings, Flanges and Unions. Ball valves with Flanged or Butt-Welding ends for General Service. Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends.
Steel ball valves for petroleum, petrochemical and allied industries. Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads. Testing of valves.
API 6D: API 6FA: API 594:
API 598: API 600:
API 602:
API 607: API 608:
API 609: API Q1:
ISO 5208: ISO 5211: ISO 9001: ISO 10497:
bar bar
ASME B16.5: ASME B16.10:
ASME B16.11:
ASME B16.25: ASME B16.34:
ASME B1.20.1:
MSS SP 6:
MSS SP 25:
MSS SP 72:
MSS SP 110:
BSI BS 5351:
BSI BS 21:
BSI BS 6755:
Specification for pipeline valves. Specification of fire test for valves. Specification for wafer check valves, Wafer, Wafer-Lug, and Double Flanged Type. Specification for inspection and testing of valves. Specification for Bolted Bonnet Steel for Petroleum and Natural Gas Industries. Specification for compact steel gate valves with flanged, threaded, welding and extended body ends. Specification for fire test for soft seated, quarter-turn valves. Specification for metal ball valves, flanged and butt welding ends. Specification for butterfly valves Lug type and Wafer type. Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum, Petrochemical and Natural Gas Industry.
Industrial valves - Pressure testing of metallic valves. Industrial valves - Part-turn actuator attachments. Quality management system. Testing of valves - Fire type-testing requirements.
72
Estando los productos descriptos en este catálogo sujetos a los requisitos de distintos sistemas normati-vos relacionados con su diseño y métodos de ensayos, el fabricante se reserva el derecho introducir modificaciones a la información contenida sin previo aviso a los usuarios en respuesta a cambios en los requisitos aplicables.Se recomienda consultar a nuestro departamento comercial ante dudas sobre la vigencia o validez del contenido del presente documento.
As all the products described in this catalogue are subjected to the requeriments of the different standards involved in their design and test methods,the manufacturer reserves the right to introduce all the modifications to the information contained herein without previous warning to users.It is recommended to consult our commercial depart-ment in case of doubt about the validity of the contents of the present document.
Catálogo VALMEC Edición 2017 - Rev. 02
Stephenson 2830 B1667AKF TortuguitasProvincia de Buenos Aires, ArgentinaTel.: +54 03327-452426 / +54 [email protected] / [email protected]
www.valmec.com.arCatálogo VALMEC S.A.Edición 2017 - Rev. 02
Viton® and Delrin® acetal resin are registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Devlon® is a registered trademark of James Walker Devol,Devol Engineering Limited. PEEK® is a trademark of Victrex plc. Stellite® is a registered trademark of Kennametal Stellite Company.