Importa
nt Tips To
Choose The Right
Hacksaw Blade
● Hacksaw blade – The most useful metal cutting tool available with the
manufacturers.
● The raw material & working condition determines the lifespan of hacksaw
blade.
● The right selection of hacksaw blade will improve your productivity and
efficiency.
Introduction to HackSaw Blade
● Tooth per inch (TPI) is one of the most important factor to be
considered before making your decision to buy a hacksaw blade.
● TPI can influence the work process and work life of hacksaw blade.
There are two kind of TPI blades, low and high.
Tooth Per Inch
Our Products
Our Products
1) Removes exccessive material in one stroke.
2) Best choice for cutting thick metals.
3) Never use lower TPI blade on thin metals.
4) Lower TPI blade creates more resistance while cutting.
5) Lower TPI blades are useful for cutting larger material.
Low TPI blade
1) Higher TPI blades appear are useful for cutting thin material.
2) There is less chance of hooking of tooth to the metal.
3) Higher TPI blades help in initiating cutting process easily.
4) Higher TPI blades provides precise & clean cuts fitting your needs.
High TPI blade
About Us - Bipico
● BIPICO, an ISO 9001:2008 company is established in November –
1974 and is proud of its more than four decades journey as a
Hacksaw Blade manufacturing company.
● BIPICO has grown into a major cutting tools manufacturer and
exporter with a strong brand image in India and in International
markets.
Contact Us
Nadarkha, Post Box No. 36, Chikhli Road, Bilimora – 396 321Dist. Navsari, Gujarat, ( INDIA )
+ 91- 2634- 284629 / 284630 / 283695
+ 91- 2634- 283256
Top Related