Visions become reality.
COMPOSITES EUROPE
8th European Trade Fair & Forum for Composites,Technology and Applications
17-19 Sept 2013 | Messe Stuttgart
www.composites-europe.comOrganiser: Partners:
SHOW CATALOGUE
SHOW
CATALOGUE
THE FUTURE IS COMPOSITE
Carbon Composites e.V. – Das KompetenznetzwerkDer Verein hat es sich zum Ziel gesetzt, der Gruppe der Hochleistungs-
faserverbundwerkstoffe zum industriellen Durchbruch zu verhelfen.
Konz
epti
on u
nd R
ealis
ieru
ng: ©
Ott
-Wer
beag
entu
r.de
·
Bi
ld: C
CeV
CERAMICCOMPOSI TES CC TUDALIT
CC BADEN-WÜRTTETT MBERGCC SÜDWEST
CC SCHWEIZCC AUSTRIA
www.carbon-composites.euCarbon Composites e.V.
COMPOSITES EUROPE 20138th European Trade Fair & Forum for Composites, Technology and Applications17 - 19 September 2013 | Messe Stuttgart, Germanywww.composites-europe.com
Veranstalter / Organiser
Reed Exhibitions Deutschland GmbH Völklinger Straße 4 , 40219 Düsseldorf, GERMANYPhone: +49 211 90191-0, Fax: +49 211 90191-123Website: www.reedexpo.de
Geschäftsführung / ManagementHans-Joachim Erbel, Matthias Templin, Michael Freter
Projekt-Team / Project TeamMarkus M. Jessberger, Event DirectorMichael Köhler, Project ManagerLisa Laakmann, Event ManagerEva-Maria Heigl, Visitor CoordinatorEva Schrör, Project AssistantMarlene Mohr, Project AssistantAnna Zieniewicz, Sales ManagerFabian Trippe, Sales ExecutiveAnne Kampf, Trainee
Partner / Partners:
Herausgeber / PublisherReed Exhibitions Deutschland GmbHVölklinger Straße. 4, 40219 Düsseldorf, GERMANYPhone: +49 211 90191-0, Fax: +49 211 90191-123
Verlag / Publishing HouseReed Exhibitions Deutschland GmbHVölklinger Straße 4, 40219 Düsseldorf, GERMANYPhone: +49 211 90191-321Fax: +49 211 90191-180
VERANTWORTLICH FÜR / RESPONSIBLE FOR
Redaktioneller Inhalt / EditorialMarlene Mohr, Phone: +49 211 90191-226
Anzeigen & Inhalt Katalogeinträge / Advertisment & Content catalogue entriesAnja Späker, Phone: +49 211 90191-321
Abwicklung Katalogeinträge / Handling catalogue entriesAnke Müller, Phone: +49 211 90191-214
Satz & Layout / LayoutInken Kronsbein, Phone: +49 211 90191-189Judith Veenstra, Phone: +49 211 90191-206
Druck / PrintingKössinger AGFruehaufstraße 2184069 SchierlingPhone: +49 9451 499-0
Redaktionsschluss / Editorial Deadline31. Juli 2013
Grußworte / Welcome addresses ..............................2-11
Dr. Nils Schmid MdL,Stellvertretender Ministerpräsident und Finanz- und Wirtschaftsminister des Landes Baden-Württemberg ........ 2
Volker Fritz, European Composites Industry Association (EuCIA) ............ 4
Dr. Elmar Witten,AVK – Industrievereinigung Verstärkte Kunststoffe............. 6
Dr. Walter Begemann,VDMA Forum Composite Technology ............................... 8
Hans-Joachim Erbel, Markus M. Jessberger, Reed Exhibitions Deutschland GmbH .......................10 - 11
Partner / Partners .............................................12 - 13
Rahmenprogramm / Special Programme ................14 - 30
Product Demonstration Area.................................14 - 16COMPOSITES Forum ............................................18 - 20CADFEM Workshop ....................................................19Internationale AVK Tagung /International AVK Conference ................................22 - 24Länderpavillons / International Pavilions ..................26 - 28Recruiting Area..........................................................30
Social Media Network .................................................32
Daten & Fakten / Facts & Figures .........................34 - 37
Übersichtsplan / Orientation Plan .................................38
Highlights .................................................................38
Hallenverzeichnis mit Ausstellerfirmen / .................39 - 48
Floor Plan With Exhibitiors
Alphabetisches Ausstellerverzeichnis / ................. 49 - 164
Alphabetical List Of Exhibitors
Warenverzeichnis mit Ausstellerfirmen /............. 165 - 196Product Groups With Exhibitors
Nachtrag / Addendum..................................... 197 - 200
Inserentenverzeichnis / List of advertisersACMA - American Composites Manufactures Association .............29Aircraft Interiors Expo ...........................................05, 25Blue Line & Bro .........................................................35Carbon Composites e.V. (CCeV) .............2. Umschlagseite /............................................................. 2nd Cover PageCREI - Centro Ricerche Editoriali Internazionali Srl ............09Dr. Gupta Verlag ........................................................07Elsevier Advanced Technology .......................................17FKM Gesellschaft zur Freiwilligen Kontrolle vonMesse- und Ausstellungszahlen.....................................50India Composites Show................................................03MIR-Expo ..................................................................15Network Press Germany GmbH.....................................31Nief Plastic SAS .........................................................13Reed Exhibitions Deutschland GmbH ........................33, 43SAE International........................................................21SAMPE.....................................................................27Union of Composites Manufacturers ..............................37
Inhalt / Content
1
2
Sehr geehrte Damen und Herren,
der Leichtbau wird wegen der zunehmendenBedeutung von Ressourcen- und Materialeffi zienz für die Wettbewerbsfähigkeit von Unternehmen im verarbeitenden Gewerbe zukünftig eine entscheiden-de Rolle spielen. Für den Einsatz im Leichtbau sindinsbesondere faserbasierte Werkstoffi nnovationenaufgrund ihrer herausragenden Eigenschaften sehr vielversprechend. Die COMPOSITES EUROPE - Fachmesse für Verbundwerkstoffe, Technologie und Anwendungen - ist deswegen eine der wichtigstenLeichtbau-Veranstaltungen in Europa. Neben neuenLeichtbaukonzepten stehen in diesem Jahr vor allemmoderne Produktions- und Automatisierungslösungenfür Verbundwerkstoffe im Mittelpunkt der Messe.
Neben den Verbundwerkstoffen gewinnt der hybride Leichtbau, d. h. die Verwendung und Verbindung unterschiedlicher Materialien, immer mehr anBedeutung. Baden-Württemberg hat als führenderLeichtbau-Standort beste Voraussetzungen, diesesPotenzial auszuschöpfen. Es freut mich sehr, dass hier in Stuttgart parallel zur COMPOSITES EUROPE erstmalig die HYBRID Expo als Innovationsplattformfür hybride Bauteile stattfi ndet. Partner der neuen HYBRID Expo ist die erst kürzlich gegründeteLandesagentur für Leichtbau Baden-WürttembergGmbH. Die Agentur fungiert als branchenüber-greifender Ansprechpartner für Industrie undWissenschaft und spannt ein Dach über Aufgaben wie Technologietransfer, Forschung sowie Aus- und Weiterbildung, von dem besonders mittelständischeUnternehmen und das Handwerk profi tieren sollen.
Ich wünsche dem Veranstalter einen erfolgreichen Messeverlauf, den Ausstellern gute Geschäfte undden Fachbesuchern, dass sie anregende undnützliche Informationen über innovative Verfahren und neue Produkte mit nach Hause nehmen.
Dr. Nils Schmid MdLStellvertretender Ministerpräsident und Finanz- undWirtschaftsminister des Landes Baden-Württemberg
Ladies and gentlemen,
Due to the increasing importance of the effi cient use of resources and materials for the competitive position of companies in the processing industries, lightweight construction will play a critical role in future. With their outstanding properties, innovative fi bre-based materials in particular hold great promise for the use in lightweight construction. This is why COMPOSITES EUROPE – the Trade Fair for Composites, Technology and Applications – is one of the most important lightweight construction events in Europe. In addition to new lightweight construction concepts, the focus at this year’s trade fair is primarily on state-of-the-art production and auto-mation solutions for composite materials.
Besides composites, hybrid lightweight construction, i.e. the use and combination of different materials is steadily gaining in importance. Baden-Württemberg as a leading lightweight construction location is in the best possible position to fully exploit this potential. I am delighted that for the fi rst time HYBRID Expo as an innovation platform for hybrid components will be held in parallel with COMPOSITES EUROPE here in Stuttgart. The partner of the new HYBRID Expo is the Landesagentur für Leichtbau Baden-Württem-berg GmbH (Baden-Württemberg state agency for lightweight construction) which was established only recently. The agency acts as a cross-sector point of contact for the industrial and the scientifi c communities, joining and combining tasks such as technology transfer and research as well as training and further education to benefi t medium-sized companies and tradesmen’s businesses in particular.
My best wishes go to the organisers for successful trade fairs, to the exhibitors for good business and to the trade visitors for stimulating and usefulinformation to take home on innovative processes and new products.
Dr. Nils Schmid MdLDeputy State Premier and Minister for Finance and Economy of the State of Baden-Württemberg
Grußwort / Welcome Address
International Exhibition & Conference onFor more information, contact:Manik [email protected]
COMPOSITES& ADVANCED MATERIALS INDUSTRY
OPENING DOORS TO THE FASTEST GROWING COMPOSITES MARKET
OPENING DOORS TO THE FASTEST GROWING COMPOSITES MARKET
www.IndiaCompositesShow.comPRAGATI MAIDAN, NEW DELHI
24 25 26
Foundation Partner Feature Zone Organised bySilver Partners
4
Liebe Besucher, liebe Aussteller,
Ich freue mich, Sie im Namen der European Composites Industry Association EuCIA zurCOMPOSITES EUROPE in Stuttgart zu begrüßen.Aufgrund ihres wachsenden Renommees und der hohen Qualität ihres Programms und ihrer Teilnehmer verspricht diese 8. Aufl age eine noch höhere Besucher- und Ausstellerbeteiligung als im vorigen Jahr.
COMPOSITES EUROPE ist eindeutig die innovativste undgrößte Messe in Deutschland und repräsentiert den stärksten Markt für Verbundwerkstoffanwendungen!Die Aussteller der COMPOSITES EUROPE bilden die gesamte Wertschöpfungskette dieses Industrie-zweiges ab: vom Rohmaterial über Halbzeuge und Verarbeiter bis zu den neuesten Technologien,Maschinen und Dienstleistungen.
Gemeinsam mit Reed Exhibitions, Reinforced Plasticsund der AVK wird die EuCIA Sie mit der Internationalen AVK-Tagung und ihren hochkarätigen Vorträgen in dieWelt der Verbundwerkstoffe einführen; Vorträge von Ausstellern, Sonderschauen und Live-Demonstrationen in der Product Demonstration Area werden folgen.
Dieses Jahr kommen Sie mit der HYBRID Expo zudem in den Genuss einer weiteren starken Messe, die die gesamte Bandbreite der Hybridtechnologien zeigt.
Mit Ausstellern und Besuchern aus über 25 Ländernbietet die diesjährige COMPOSITES EUROPE Ihnen optimale Möglichkeiten zum Networking und zur Information über Ihr Marktsegment.
EuCIA, die europäische Stimme der Welt derVerbundwerkstoffe, freut sich darauf Sie in Stuttgart zu sehen.
Volker FritzPräsident EuCIA – European Composites Industry Association
Dear visitors and exhibitors,
On behalf of EuCIA, The European Composites Industry Association, I’m pleased to welcome you to Composites Europe in Stuttgart.This 8th edition promises to attract even more visitors and exhibitors than last year, due to its growing reputation and the excellence of its program and participants.
COMPOSITES EUROPE is indeed the most innovative and largest fair in Germany and represents the strongest market for composite material applications!The exhibitors at COMPOSITES EUROPE form the complete added value chain of this sector of the industry: From raw materials via semi-fi nished goods and processors to the latest technologies, machines and services.
EuCIA together with Reed Exhibitions, Reinforced Plastics and AVK will introduce you to the world of composites with the International AVK Conference composed by high-calibre lecturers followed by exhibitor lectures, special presentations and live demonstrations in the Product Demonstration Area.
This year, you can also enjoy another powerful exhibition at HYBRID Expo, presenting the full range of hybrid technology.
With exhibitors and visitors from over 25 countries, this year’s COMPOSITES EUROPE will provide you with the best opportunities to network and learn about your market segment.
EuCIA – the European voice of the composites world is looking forward meeting you in Stuttgart.
Volker Fritz President of EuCIA – European Composites Industry Association
Grußwort / Welcome Address
The global market leader for the world’s aircraft interiors industry. Aircraft Interiors Expo is the launch pad for cabin programmes showcasing tomorrow’s designs, in-fl ight entertainment, connectivity and passenger services.
Register your interest at www.aircraftinteriorsexpo.com/ce13
THE DESTINATIONFOR THE AIRCRAFT INTERIORS INDUSTRY.
SAVE THE DATE8 – 10 APRIL 2014
Co-located with: Organised by: In co-operation with:
Aircraft Interiors Expo 20148-10 April 2014, Hamburg Messe, Germany
Grußwort / Welcome Address
Sehr geehrte Damen und Herren,
Die AVK unterstützt die COMPOSITES EUROPE als Partner seit deren Start 2006. Auch in diesem Jahr ist die etablierte AVK-Tagung wieder Auftaktver-anstaltung der Messe, die vom 17.-19. Septemberim bedeutendsten Markt die gesamte Wertschöp-fungskette der Industrie präsentiert.Das Programm der diesjährigen AVK-Tagung stellt in zwei Vortragreihen innovative Lösungen für unter-schiedliche Anwendungen im Faserverbundsektorvor.
Wie immer erwartet Sie eine komprimierte Ver-anstaltung mit kompetenten Referenten, die einen Überblick über alle derzeit relevanten Themen im Composites-Markt geben.
Dem medialen Hype rund um das Thema Compositesmüssen nun realisierbare (Fertigungs-) Konzepte folgen. Dabei muss den Entscheidungsträgern inden Anwendungsindustrien auch deutlich gemachtwerden, dass Lösungen für die Serienfertigung (mit GFK) schon seit langem existieren. Es gilt, das fürdas jeweilige Einsatzgebiet bestmögliche Materialbzw. den besten Materialmix zu finden und effizient herzustellen.
Die renommierte Innovationspreisverleihung am Abenddes ersten Tages und die „Composites Night“, gemeinsam mit den Ausstellern der COMPOSITES EUROPE, bietenIhnen den Rahmen für einen exklusiven Erfahrungsaus-tausch.
Die AVK als Interessenvertretung der DeutschenComposites-Industrie wünscht der COMPOSITES EUROPEeine erfolgreiche Messe-Veranstaltung und freut sich auf die Zusammenarbeit in Stuttgart.
ten,Managing Director of AVK – Industrievereinigung Verstärkte Kunststoffe e.V.(Federation of Reinforced Plastics)
Dear visitors and exhibitors,
AVK has supported COMPOSITES EUROPE as its institutional partner ever since the launch of the event in 2006. The established AVK Conference will once again be marking the start of the trade fair which will be presenting the entire value chain of the industry in the leading European composites market from 17 - 19 September. This year‘s AVK Conference programme is set to introduce innovative solutions for a wide range of applications in the fibre composites sector in two series of presentations.
As always you will be treated to a concentrated event featuring expert speakers who will be giving an overview of the main topics currently affecting the composites market.
The media hype about composites must now be backed up by practical product (manufacturing) pro-posals. It must be made clear to the decision-makers in the application industries that there are already plenty of well-established serial production solutions based on glass fibre reinforced plastics. What is important is to find the best possible material, or the best mixture of materials, for each individual applica-tion and to deploy these in the most efficient manner.
The presentation of the prestigious innovation awards on the evening of the first day and the „Composites Night“ together with the exhibitors of COMPOSITES EUROPE provide exclusive opportunities for consulting with others in the business.
The AVK, representing the interests of the composites industry, wishes all those taking part in COMPOSITES EUROPE a successful event and looks forward to seeing everyone in Stuttgart.
Dr. Elmar Witten,Managing Director of AVK – Industrievereinigung Verstärkte Kunststoffe e.V.(Federation of Reinforced Plastics)
6
07| 2013
www.compounds.ch
Weitere Produkte und andere Anwendungen fi nden Sie auf unserer Homepage
Compounds AGBarzloostrasse 1CH-8330 Pfäffi kon ZHTelefon +41 44 953 34 00Telefax +41 44 953 34 01
Trinkwasserzugelassene EPDM Mischungen
Schwer entfl ammbare Mischungen
Rollerhead-Folien
Mischungen nach Kunden-Spezifi kationen
Spezialprofi le vulkanisiert
KAUTSCHUK-MISCHUNGEN NACH MASS
FO
RU
M F
ÜR
DIE
PO
LYU
RE
TH
AN
IND
US
TR
IE
PU MAGAZIN
www.pu-magazin.de
02/2013 Mai
FlammschutzmittelInterview: J. Palmersheim und W. Frank, Isopa
Brandschutzvorschriften
Stabilisierung von PU-Weichschäumen
Mehrkomponententechnik für PU
Pur(e) Fascination...
für faszinierende Polyurethan-Erzeugnisse legt Hennecke seit mehr als 65 Jahren den Grundstein für überlegeneProduktqualität und effiziente Rohstoffnutzung in sämtlichen Anwendungsbereichen.
>> Dosiermaschinen >> Kühlmöbel-Anlagen >> Blockschaum-Anlagen
>> Sandwichpanel-Anlagen >> PUR-CSM-Sprühtechnologie >> 100% Know-how
>> Formschaum-Anlagen >> 360˚ Service
www.hennecke.com
für Ihre Idee
COMPOSITES EUROPE / Stuttgart17.09. - 19.09.2013, Halle 6, Stand D16
K-Messe / Düsseldorf 16.10. - 23.10.2013, Halle 13, Stand B63
P. O. Box 10 41 2540852 Ratingen/Germany 3| 2013
Volume 5, July 2013
talc in TPO
bio-polyols
bio-based TPV
improving bond strength
03/2013 JUNE/JULY
PO
LYU
RE
TH
AN
ES
MA
GA
ZIN
E I
NT
ER
NA
TIO
NA
L
Europur and Euro-Moulders general assembly
End-of-life management of polymeric foams
Low- or non-emissive amine catalysts
Sandwich panel production
Spray polyurethane foam
www.pu-magazine.com
Sometimes gaps are adorable, but not in a building’s insulation. Fortunately closed-cell spray polyurethane foam fills every opening.
To closed-cell spray polyurethane foam insulation (ccSPF), there’s no such thing as a cute little gap. Even the tiniest gap threatens performance and energy efficiency. Closed-cell spray foam expands to fill every cavity, while significantly increasing structural strength and durability. Along with its superior R-value, ccSPF is a certified*air barrier and a vapor retarder. Simply put, gap-filling ccSPF formulated with a Honeywell blowing agent is the preferred all-in-one solution for new construction or retrofits. But don’t just take our word for it. Download the insulation comparison chartby scanning the QR code to see for yourself why ccSPF is the solid choice.
Also, ask about Honeywell Solstice™ Liquid Blowing Agent – our latest nonflammable, non-ozone depleting, low global warming potential ccSPF blowing agent.
*According to ASTM-2178 testing by the Air Barrier Association of America when a 1” minimum of ccSPF is applied.
no gaps
Call 800-631-8138 or visit www.honeywell-blowingagents.com for more information.
© 2013 Honeywell International Inc. All rights reserved.
03/2013/
PO
LYU
RE
TH
AN
ES
MA
GA
ZIN
E I
NT
ER
NA
TIO
NA
L
Europur and Euro-Mouldeerss gggeene
End-of-life management ooff ppoolyym
Low- or non-emissive amiinneee ccaata
Sandwich panel productioonn
Spray polyurethane foam
www.pu-magazine.com
Sometimes gaps are adorable, but not in a bbuuilddiingg’sFortunately closed-cell spray polyurethane fooaaamm fills
pp
noo g
Ratingen, GermanyISSN 2190-7293
PO
LYU
RE
THA
NE
S M
AG
AZI
NE
IN
TER
NAT
ION
AL
FO
R C
HIN
A
1 – 2013 4
· ·Sonderhoff
www.sonderhoff.com • [email protected]
2013 4 21 -29N4 D040
Chinese
edition
02| 2013
www.kraussmaffeiberstorff.comwww.kraussmaffeiberstorff.com
Perfect interactionComposite profile lines
022| 2
www.kraussmaffeibersstoorrfff..com
Perfect interacctionComposite profil liofile lines
1| 2013
www.kraussmaffeiberstorff.comwww.kraussmaffeiberstorff.com
完美的交互复合型材挤出生产线
Chinese
edition
Fachzeitschriften und Bücher für Experten
Postfach 104125 · 40852 Ratingen · www.gupta-verlag.deTel. +49 2102 9345-0 · Fax +49 2102 9345-20
MIT ANDEREN AUGEN SEHEN…DIE POLYMERINDUSTRIE
Kontaktieren Sie uns – wir informieren Sie gern
über Abonnementkonditionen, redaktionelle Features
und Möglichkeiten, Ihr Unternehmen optimal in Anzeigen zu präsentieren ... kurzum, was wir für Sie und
Ihren Erfolg tun können.
Grußwort / Welcome Address
Sehr geehrte Aussteller und Besucher,
das VDMA Forum Composite Technology begrüßt Sieals Partner der COMPOSITES EUROPE herzlich zur 8. Fachmesse vom 17.-19. September 2013 inStuttgart. Wir vertreten den Maschinen- und Anlagenbau in allen Prozessschritten entlang derComposites-Wertschöpfungskette und freuen uns über den beständigen Wachstumskurs der COMPOSITES EUROPE.
Es gilt, den Weg zur Serienfertigung konsequentzu beschreiten, um das Kostensenkungspotenzial insbesondere bei Verfahren und Prozessen zeitnah auszuschöpfen. Nur so gelingt es, die Produktion hochfester Faserverbundbauteile wettbewerbsfähigin Leichtbaukonzepten von Automobilbau, Luft- und Raumfahrt, Windindustrie sowie Bausektor undMaschinenbau zu verankern. Die Mitglieder imVerband Deutscher Maschinen- und Anlagenbau(VDMA) haben hier für die gemeinsame Entwicklungvon Automatisierungslösungen und innovativenEndanwendungen viel zu bieten.
Fünfundvierzig VDMA-Mitgliedsunternehmen stellen auf der COMPOSITES EUROPE von der Fertigung tex-tiler Verstärkungsstrukturen bis zur Endbearbeitungvon Faserverbundbauteilen aus. Einige ausgesuchteAussteller darunter präsentieren wesentliche Trendsin der Composites-Produktion an den ersten zwei Messetagen auf dem Vortragsforum der Messe. Interessierte Besucher haben die Möglichkeit bereits vorab über ein B2B-Tool Gesprächstermine mit den teilnehmenden Ausstellern zu vereinbaren.Gemeinsam mit den Anwenderorganisationen AVK,CCeV und CFK-Valley Stade bildet der VDMA ein starkes Netzwerk zur Ausgestaltung der vielfältigen Aktivitäten auf der COMPOSITES EUROPE und zumAusbau der Internationalisierung. Wir wünschen allen Beteiligten eine erfolgreiche Messe und freuenuns auf ein Treffen in Stuttgart.
Dr. Walter BegemannProject Manager VDMA Forum Composite Technology
Dear Exhibitors and Visitors
The VDMA Forum Composite Technology is partner of the fair and would like to extend a warm welcome to you for the 8th COMPOSITES EUROPE, which is being held from 17 to 19 September in Stuttgart. We represent the engineering sector in all the pro-cess steps of the composites value chain and we are delighted about the steady growth of COMPOSITES EUROPE.
What is important now for the companies involved is to move towards series production as quickly as possible in order to exploit the cost-saving potential of the methods and processes directly. Only then will it be possible to anchor the production of compe-titive high-strength fibre composite components in lightweight construction designs for the automotive, aerospace, wind power, building and engineering industries. The members of the German Engineering Association (VDMA) have plenty to offer when it comes to the joint development of automation solutions and innovative end-use products.
45 VDMA member companies will be exhibiting at COMPOSITES EUROPE - covering everything from the production of textile reinforcement structures through to the finishing of fibre composite compo-nents. A select group of these exhibitors will be presenting the key trends in composites production in the exhibition‘s presentation forum on the first two days of the event. Interested visitors will be able to pre-arrange meetings with the participating exhibitors using a special B2B tool.Alongside the AVK, CCeV and CFK-Valley Stade user organisations the VDMA is part of a powerful net-work responsible for organising the varied activities at COMPOSITES EUROPE and for enhancing the international profile of the event. We would like to wish everyone involved every success at the fair and look forward to meeting you in Stuttgart.
Dr. Walter BegemannProject Manager, VDMA Forum Composite Technology
8
MAGAZINE
CREI SrlCENTRO RICERCHE EDITORIALI INTERNAZIONALI www.compositesolutions.it
COMPOSITE MATERIALSAND NEW TECHNOLOGIES
FOR ADVANCEDPRODUCTS
SSSS
DDS
mit einem weiteren, deutlichen Wachstumsschub kehrt die COMPOSITES EUROPE in diesem Jahrturnusmäßig auf das Stuttgarter Messegeländezurück. Über 400 Aussteller – mehr als doppelt soviele wie bei der Premiere vor sieben Jahren –markieren dabei eine neue Bestmarke. Wie erfolg-reich sich die Messe inzwischen in der Composi-tes-Welt etabliert hat, beweisen zudem die vieleninternationalen Keyplayer, die großen Länder-präsentationen und der Blick auf die Ausstellerliste:27 Nationen sind in diesem Jahr auf der COMPOSITES EUROPE vertreten.
Mit neuen Leichtbaukonzepten, modernsten Produk-tions- und Automatisierungslösungen für Verbund-werkstoffe machen die COMPOSITES EUROPE und ihre Aussteller eines deutlich: Die Industrie rund um die Herstellung, Verarbeitung und Anwendung von Verbundwerkstoffen ist eine der derzeit innovativstenund spannendsten Branchen – mit weiterhin großemPotential für die Zukunft.
Wie diese Zukunft aussehen könnte, zeigen Experten aus Praxis und Wissenschaft im Rahmenprogramm der Messe, wie der Product Demonstration Area oder dem Vortragsforum, das u.a. mit großer Unterstützung des VDMA Forum Composite Tech-nology entstanden ist. Den traditionellen Auftakt zurCOMPOSITES EUROPE bildet erneut die InternationaleTagung der AVK, die die enormen Möglichkeiten unddas Wachstum im GFK- und CFK-Markt aufzeigt.
Optimal ergänzt wird die COMPOSITES EUROPE indiesem Jahr erstmals durch eine neue Veranstaltungzum funktionsintegrativen Systemleichtbau: Mit der HYBRID Expo bieten wir der Industrie rund um Multi-material-Lösungen, deren Technologien und Anwen-dungen von nun an eine eigene, neue Heimat.
Wir laden Sie ein, sich auf beiden Veranstaltungen selbst ein Bild von der Zukunft des Leichtbaus zumachen und wünschen Ihnen drei erfolgreiche Messetage.
Markus M. JessbergerEvent DirectorCOMPOSITES EUROPE
Hans-Joachim Erbel, CEO Reed ExhibitionsDeutschland GmbH
Grußwort
10
Welcome Address
Dear exhibitors, dear visitors,
With another noticeable growth spurt and following the rotation schedule, COMPOSITES EUROPE returns to the Stuttgart Exhibition Centre this year. Over 400 exhibitors – more than twice the number that participated in the premiere event seven years ago – constitute a new record. The trade fair’s remarkable success in establishing itself in the world of composites is also refl ected in the large number of major international industry players, the large national presentations and a look at the exhibitor list: 27 countries are represented at this year’s COMPOSITES EUROPE.
With new lightweight construction concepts, state-of-the-art production and automation solutions for composite materials, COMPOSITES EUROPE and its exhibitors clearly demonstrate that the composites production, processing and application sector is currently one of the most innovative and exciting industries and continues to offer great potential for the future.
The shape this future could take is illustrated by ex-perts both from industry practice and science in the trade fair supporting programme which was compi-led with signifi cant support from, among others, the VDMA Forum Composite Technology. Once again, the traditional overture to COMPOSITES EUROPE is the International AVK Conference which demonstrates the enormous possibilities and growth in the GFRP and CFRP market.
For the fi rst time, this year a new event on functio-nally integrated lightweight construction systems will be a perfect complement to COMPOSITES EUROPE: at HYBRID Expo, we offer a new home to the indus-try concerned with multi-material solutions, their technologies and applications.
We invite you to form your own impression of the future of lightweight construction and wish you three successful trade fair days.
Markus M. JessbergerEvent Director COMPOSITES EUROPE
Hans-Joachim Erbel, CEO Reed Exhibitions Deutschland GmbH
11
European Composites Industry Association - EuCIA
EuCIA vertritt 15 nationale Industrie-verbände und damit rund 8.000 Unternehmen der Com-posites-Industrie in 11 europäischen Ländern. Als Partner fördern EuCIA und COMPOSITES EUROPE einen intensiven Austausch zwischen den Marktakteuren der europäischen Composites Industrie und bringen den gesamten Markt der Verbundwerkstoffe auf der COMPOSITES EUROPEzusammen. EuCIA investiert regelmäßig in Marktforschungen,Analysen und Trendstudien, von denen die gesamte Com-posites-Industrie profitiert. Dieser Service wird aus denEinnahmen der COMPOSITES EUROPE mitfinanziert.
EuCIA represents 15 national industry associations and thus around 8,000 companies from the composites indust-ry in 11 European countries. As partners, EuCIA and COMPOSITES EUROPE promote an intensive exchange between the market players in the European composites industry and bring together the complete market for composite materials at COMPOSITES EUROPE. EuCIA invests regularly in market research, analyses and trend studies, from which the complete composites industry benefits. This service is co-financed from the income from COMPOSITES EUROPE.
www.eucia.eu
Industrievereinigung Verstärkte Kunststoffe e.V. - AVK
Die AVK ist die mitgliedsstärkste Fachorganisation der Rohstofflieferanten und der Verarbeiter von verstärkten und gefüllten Kunststoffen in Europa. Ferner sind Maschinenbauer, Ingenieurbüros, Prüfämter und wissenschaftliche Institute Mitgliederder AVK. Über 200 Mitgliedsunternehmen tauschen in 15 AVK-Arbeitskreisen Erfahrungen aus und stellen die Vorteilhaftigkeit der Werkstoffe am Markt dar. Die AVK veranstaltet ihre jährliche Internationale AVK-Tagung auf der COMPOSITES EUROPE.
The AVK is the trade organization for raw material suppliers and processors of reinforced and filled plastics in Europe with the largest number of members. AVK members also include machine builders, engineering offices, testing authorities and scientific institutes. Over 200 member companies exchange experiences in 15 AVK working groups and demonstrate the advantages of these materials in the market. AVK holds its annual international AVK Conference at COMPOSITES EUROPE.
www.avk-tv.de
Partner / Partners
Wir danken allen Partnern aus der Industrie und den führenden Medien für die gute Zusammenarbeit. We thank all our partners from the industry and the leading media for the good collaboration.
VDMA Forum Composite Technology
Das Forum Composite Technology istdas Netzwerk der Technologieanbieter für Faserverbundwerkstoffe. Das VDMA-Forum ist zentraler Kontaktpunkt der Branche und Schnittstelle zu allen
Unternehmen, Verbänden und Instituten, die am Herstel-lungs- und Verarbeitungsprozess (bzw. an der Anwendung) von Composites beteiligt sind und bietet allen Partnern eine Plattform für technologieübergreifenden Austausch. Aktionsschwerpunkte des Forums: Märkte und Kunden, Herstellernachweis, Prozessverständnis, Forschung,Öffentlichkeitsarbeit, Messen (Politik).
VDMA Composite Technology is the network of composite technology suppliers. This forum is the central hub of the industry - serving as an interface to all companies, associations and institutions being involved in manufactu-ring, processing and applying composites. To the associa-ted member companies, it offers a platform for cross-technology exchange of experience and also for joint activities. Moreover, the forum enables a joint articulation of interests and concerted public relations activities. Main activities of VDMA Composite Technology: exhibition policy, markets and customers, sourcing service, process under-standing, research, public relations.
www.composites.vdma.org
Reinforced Plastics
Reinforced Plastics ist seit 50 Jahren das weltweit führende Magazin für die
gesamte Composites-Industrie und der offizielle Media-partner der COMPOSITES EUROPE. Reinforced Plasticswird herausgegeben von Reed Elsevier, dem größtenwissenschaftlichen und technischen Verlag der Welt und Schwesterfirma von Reed Exhibitions. Andere Produktefür die Branche sind die Reinforced Plastics digital edition, die Website www.reinforcedplastics.com, der Reinforced Plastics Weekly e-newsletter, Reinforced Plastics Chinaund der internationale Buyers‘ Guide.Reinforced Plasticsund COMPOSITES EUROPE garantieren Ausstellern und Unternehmen innerhalb der Branche optimale Kommunika-tionserfolge.
For 50 years, Reinforced Plastics has been the leading magazine worldwide for the whole of the composites industry and is the official media partner of COMPOSITES EUROPE. Reinforced Plastics is published by Reed Elsevier, the largest scientific and technical publishers in the world and is an affiliated company of Reed Exhibitions. Other products for the industry include the Reinforced Plastics digital edition, the Website www.reinforcedplastics.com, the Reinforced Plastics Weekly e-newsletter, Reinforced Plastics China and the International Buyers‘ Guide. Reinforced Plastics and COMPOSITES EUROPE guarantee exhibitors and companies within the industry optimum communication success.
www.reinforcedplastics.com
12
A de s i gn and R&D dep t t o s uppo r t y ou r p r o j e c t s
MOULDING TECHNOLOGIESInjection and compression of
thermoplastics and thermosetsHigh performance materials
Inserts overmoulding2k mouldingGaz injection
THERMOFORMINGMACHINING
MOULDSFor Plastics, metallic alloys,
ceramics
Contact : [email protected] - Tel : +33(0)4.78.40.11.52 - Fax : +33(0)4.72.47.01.48
Automotive industry, electricity, aeronautics/defence, consumer electronics, medical, construction, industry, sports & leisure, household appliances, …
Groupwww.nief-plastic.com
a subsidiary from www.sintex.in DECORATIONpad printing, painting,Laser etching, …
ASSEMBLINGNEW TECHNOLOGIESLSR - 3D MID
Thermoplastic Composites
NP TUNISIANP TUNNP TUNNP TUNN
NP P NP NP RDNORDP NORD
NP VOSGES
NNP SAVOIENNP SANP SAV
NP HUNGARIANNN
NP SLOVAKAKIAAK
NP POSCHMANNNNNP POLSKA
SEGAPLAST MMAMAROCMA
CSTICSTICNNIEF PLASNIEF PLAST CSEGAPLAST
AIP
NN
FRANCE
SLOVAKIA
POLANDGERMANY
HUNGARY
TUNISIA
MOROCCO
MO SICMOMOSICMSICMAN A ANP JURANP JURANPN
PRODUCTION SITE HEADQUARTERS
ISO 9001
ISO/TS 16949
EN 9100
AQAP 2120
ISO 14001
OHSAS 18001
Partner / Partners
Anzeige / Advert
ACMA - American Composites Manufactures Associationwww.acmanet.org
AFBW - Allianz Faserbasierte Werkstoffe Baden-Württembergwww.afbw.eu
Aircraft Interiors Expowww.aircraftinteriorsexpo.com
Assocompositiwww.assocompositi.it
Automatica - Messe Münchenwww.automatica-munich.com
Bayern Innovativ - Cluster Neue Werkstoffewww.bayern-innovativ.de/neue-werkstoffe
Carbon Composites e.V.www.carbon-composites.eu
Composite-Expowww.composite-expo.com
European Boating Industrywww.europeanboatingindustry.eu
European Pultrusion Technology association (EPTA)www.pultruders.com
EMSZwww.emsz-kompozit.hu
IKV- Institut für Kunstverarbeitungwww.ikv-aachen.de
Kaiser Stähler Rekrutierungsberatung GmbHwww.ks-recruiting.de
Kunststoffl and NRWwww.kunststoffl and-nrw.de
Lucintelwww.lucintel.com
MIR-Expowww.mirexpo.ru
Mybusinessmediawww.mybusinessmedia.nl
Ruslitewww.mirexpo.ru/eng/exhibitions/ruslite.shtml
SAMPEwww.sampe.org
TPRC - ThermoPlastic composite Research Centerwww.composites.nl/innovation-technology/tprc
UNCM - UNION OF COMPOSITES MANUFACTURERSwww.english.uncm.ru
VDID – Verband Deutscher Industrie Designer e.Vwww.vdid.de
14
Automatisierte Herstellung einer CFK-Motorhaube im Spaltimprägnierverfahren Automated manufacturing of a carbon fiber engine hood in the gap impregnation process
Institut für Kunststoffverarbeitung (IKV), RWTH Aachen.......................... Halle 4, Stand PDA_A, PDA_C
Maßgeschneiderte Composites Produktion!Von der Einzelteil- zur Serienfertigung
EURO-RTM-Group ........................................................................................ Halle 4, Stand PDA_B
Schneidtechnik im Wandel RH Schneidtechnik ...................................................................................... Halle 4, Stand PDA_E
Fertigung eines LEO-Brandschutz-Bauteils im Folieninfusionsverfahren BÜFA Composites GmbH & Co KG.................................................................. Halle 4, Stand PDA_F
Product Demonstration Area Foyer Ost / EastIm Foyer Ost werden im Eingangsbereich zur COMPOSITES EUROPE folgende interessante Produkte undVerfahren präsentiert. / At Foyer East in the entrance area of COMPOSITES EUROPE the following interesting exhibits and processes will be presented.
Das IMC/MTI-Verfahren!The IMC/MTI-Process!
HP-Textiles GmbH....................................................................................................PDA_Foyer_1
ICD ITKE Researchpavilion 2013 Universität Stuttgart,Institut für Computerbasiertes Entwerfen (ICD), Institut für Tragkonstruktionen und
Konstruktives Entwerfen (ITKE) / Institute for Computational Design (ICD), Institute of Building Structures and Structural Design (ITKE) ........................................................................................PDA_Foyer_2
TOTAL concept car : Lightweight, design and eco-efficiency in the automotive industryTOTAL Concept Car: Leichtbau, Design und Ökoeffizienz in der Automobilindustrie
CCP Composites .....................................................................................................PDA_Foyer_3
Ressourceneffizienter Leichtbau für die ElektromobilitätResource-efficient lightweight structures in the electromobility
Technische Universität Dresden, Institut für Leichtbau und Kunststofftechnik / Institute of Lightweight Engineering and Polymer Technology (ILK) ......................................PDA_Foyer_4
Composites on an offroad Esterlössl GmbH .....................................................................................................PDA_Foyer_5
BMW Z4 Rennfahrzeug mit einer revolutionären Composites-Motorhaube mit HaifischhautoberflächeBMW Z4 racing car with a revolutionary composites engine hood with a shark skin surface
Frimo Group GmbH .................................................................................................PDA_Foyer_6
Product Demonstration Area
4_PDA_C
4/E35 4_PDA_B
4/E40 4/D40
4/D384/E36
4/B37
4/B40
4/C414/D414/E41
4/A39
4/A324/B32
4/E42
4/F41
4/E32
4/E34
4/F39
4/F35 4/B34
4/B43
4/B41
4/D36
4/B364/
B38
4/A34
4/A36
4/A38
4_PDA_A
4_PDA_E
4_PDA_F
PDA - Product Demonstration Area
Holland Pavilion
WC
4/B42
4/A44
Eingang/Entrance Hall4/Exit Hall 4
4_PDA_C
4/E35
4/F09
4/B21
ÜBE
RGAN
GH
ALLE
6
4/A01
4/A02
4/A04
4/B03
4/A06
4/A10
4/B07
4/B05
4/B11
4/B04
4/C02
ABCDEF
4/C08
4/D06
4/D10
4/A12
4/B15
4/A18
4/B14
4/B18
4/B16
4/C17
4/C15
4_PDA_B
4/E40 4/D40
4/B29
4/A24
4/A20
4/A30
4/A26
4/B26
4/C18
4/D29
4/B30
4/D38
4/D25 4/B244/C21
4/D23
4/E36
4/B37
4/B40
4/A37
4/A21
4/A11
4/F24
4/F20
4/C014/D01
4/C414/D414/E414/F43
4/C22
4/A39
4/B09 4/A08
4/F01
4/F05
4/F19
4/D30
4/F29
4/D22
4/E24
4/F21
4/C14
4/F23
4/D07
4/C12
4/D15
4/D13
4/F174/
F14
4/F02
4/F18
4/F04
4/D244/E27
4/C13
4/A28
4/A32
4/B22
4/B32
4/A25
4/A35
4/A33
4/A31
4/E22
4/F25
4/F31
4/E30
4/E28
4/E26
4/E42
4/F41
4/E32
4/E34
4/F39
4/F35
4/F42
4/F28
4/F36
4/F26
4/B34
4/B43
4/B41
4/E29
4/D36
4/D024/E02 4/E01
4/D26
4/E31
4/A15
4/F03
4/E17
4/B364/
B38
4/A34
4/A36
4/A38
4/C044/D05
4_PDA_A
4_PDA_E
4_PDA_F
4/D20a
4/D20d
4/D20e
4/B06
4/D03
4/B25
4/B08
Eingang Halle 6/Entrance Hall 6
PDA - Product Demonstration Area
Holland Pavilion
French Pavilion
WC
WC
PDA - Product Demonstration Area
Länderpavillons / International Pavilions
Rebooking Area
AVK Innovationspreis / AVK Innovation Awards
4/A16
4/E33
4/B12
4/C28
4/E25
4/F07
4/B42
4/A14
4/D16
4/D144/F11
4/A44
16
Dienstag / Tuesday, 17.9.2013
10:00 - 10:30BÜFA Composites GmbH & Co KGFertigung eines LEO-Brandschutz-Bauteils im FolieninfusionsverfahrenHalle 4, Stand PDA_F
11:00 - 11:30Institut für Kunststoffverarbeitung (IKV), RWTH AachenAutomatisierte Herstellung einer CFK-Motorhaube imSpaltimprägnierverfahrenAutomated manufacturing of a carbon fiber engine hood in the gap impregnation processHalle 4, Stand PDA_A, PDA_C
12:00 - 12:30EURO-RTM-GroupMaßgeschneiderte Composites Produktion!Von der Einzelteil- zur SerienfertigungHalle 4, Stand PDA_B
1:30 - 2:00RH SchneidtechnikSchneidtechnik im WandelHalle 4, Stand PDA_E
Mittwoch / Wednesday, 18.9.2013
10:00 - 10:30Institut für Kunststoffverarbeitung (IKV), RWTH AachenAutomatisierte Herstellung einer CFK-Motorhaube imSpaltimprägnierverfahrenAutomated manufacturing of a carbon fiber engine hood in the gap impregnation processHalle 4, Stand PDA_A, PDA_C
11:00 - 11:30BÜFA Composites GmbH & Co KGFertigung eines LEO-Brandschutz-Bauteilsim FolieninfusionsverfahrenHalle 4, Stand PDA_F
12:00 - 12:30EURO-RTM-GroupMaßgeschneiderte Composites Produktion!Von der Einzelteil- zur SerienfertigungHalle 4, Stand PDA_B
1:30 - 2:00RH SchneidtechnikSchneidtechnik im WandelHalle 4, Stand PDA_E
Donnerstag / Thursday, 19.9.2013
10:00 - 10:30RH SchneidtechnikSchneidtechnik im WandelHalle 4, Stand PDA_E
11:00 - 11:30Institut für Kunststoffverarbeitung (IKV), RWTH AachenAutomatisierte Herstellung einer CFK-Motorhaube im SpaltimprägnierverfahrenAutomated manufacturing of a carbon fiber engine hood in the gap impregnation processHalle 4, Stand PDA_A, PDA_C
12:00 - 12:30EURO-RTM-Group Maßgeschneiderte Composites Produktion!Von der Einzelteil- zur SerienfertigungHalle 4, Stand PDA_B
2:30 - 3:00BÜFA Composites GmbH & Co KGFertigung eines LEO-Brandschutz-Bauteils imFolieninfusionsverfahrenHalle 4, Stand PDA_F
Product Demonstration Area
EURO-RTM-GROUP
RE
SI N
TR A N S F E R M O
LDI N
G
EURO-RTM-GROUP
RE
SI N
TR A N S F E R M O
LDI N
G
EURO-RTM-GROUP
RE
SI N
TR A N S F E R M O
LDI N
G
Dienstag / Tuesday, 17.9.2013
Session: VDMA Forum Composite Technology: Trends in der Produktion von Faserverbundbauteilen Trends in production of composites
Moderation: Christine Karin Schmidt, VDMA Forum Composite Technology
2:30 - 3:00Maschinen für 3D-HybridgewebeMachines for three-dimensional Hybrid fabricsAussteller/Exhibitor: Stäubli GmbHReferent/Speaker: Karsten Siebert
3:00 - 3:30 Bepulvern, Sintern und Kaschieren von KarbongelegenScattering, sintering and laminating of carbon multi-layered latticeAussteller/Exhibitor: Maschinenfabrik Herbert Meyer GmbHReferent/Speaker: Georg Voggenreiter
3:30 - 4:00Automatisierungslösungen für die Preform-HerstellungAutomation Solutions for Preform Production Aussteller/Exhibitor: KSL Keilmann Sondermaschinen-bau GmbHReferent/Speaker: Guido Jaeger
Moderation: Dr. Harald Weber, VDMA Forum Composite Technology
4:00 - 4:30Anwendung des vakuumunterstützten Hoch-druck-RTM-Verfahrens zur Herstellung vonCFK-Karrosseriebauteilen in der GroßserieApplication of vaccum-assisted high-pressure RTM-process for the series production of CFRP components for car bodies Aussteller/Exhibitor: Schuler SMG GmbH & Co. KGReferent/Speaker: Markus Geier
4:30 - 5:00Faserverstärkte Kunststoffe mit hochwertigenOberflächenFiber reinforced plastics with high-class surfacesAussteller/Exhibitor: KraussMaffei Technologies GmbHReferent/Speaker: Erich Fries
Mittwoch / Wednesday, 18.9.2013
Session: VDMA Forum Composite Technology: Trends in der Produktion von Faserverbundbauteilen Trends in production of composites
Moderation: Olaf Stecken, VDMA Forum Composite Technology
10:00 - 10:30 Die bidirektionale Prozesskette zwischen Design undSimulationBidirectional process chain between Design and SimulationAussteller/Exhibitor: Dassault Systemes Deutschland GmbHReferenten/Speakers: Frank Goetz, Markus Meir
10:30 - 11:00 Multi Compact Fabric - Ein neues Textil stellt sich vorMulti Compact Fabric - a brand new technical textileAussteller/Exhibitor: LIBA Maschinenfabrik GmbHReferent/Speaker: Stephan Fichtner
11:00 - 11:30Lösungskonzepte im Bereich Compositesherstellung und –recycling mit dem Schwerpunkt CarbonSolution concepts in composites processing and recycling especially for carbon fibres Aussteller/Exhibitor: AUTEFA SOLUTIONS GERMANY GMBHReferent/Speaker: Dr. Stefan Schlichter
Moderation: Dr. Walter Begemann, VDMA Forum Composite Technology
11:30 - 12:00Neue Erkenntnisse im Bau von Composite-PressenNew findings in the construction of composites moldingAussteller/Exhibitor: Siempelkamp Maschinen- und Anlagenbau GmbH & Co. KGReferent/Speaker: Michael Schöler
12:00 - 12:30 Unter Hochdruck leicht gemachtHigh Pressure meets lightweightAussteller/Exhibitor: Hennecke GmbHReferent/Speaker: Tobias Jansen
12:30 - 1:00 Werkzeuglösungen für Composite LeichtbauwerkstoffeTooling Solutions for advanced lightweight materialsAussteller/Exhibitor: MAPAL Dr. Kress AGReferent/Speaker: Hans-Peter Wengert
1:00 - 2:00 Pause / Break
COMPOSITES Forum Halle / Hall 6, Stand C28
18
COMPOSITES Forum Halle / Hall 6, Stand C28
Mittwoch / Wednesday, 18.9.2013
Session: Composite-Innovations made in Aachen – New Approaches of RWTH Aachen Univer-sity for the Industrialization of Composite Manufacturing”, hosted by Aachen Center for Integrative Lightweight Production (AZL)
Die Vorträge werden in Englisch gehalten / The sessions will be held in English.
Moderation: Dr.-Ing. Kai Fischer
2:00 - 2:30 Composites at RWTH University – The unique research network and the new “Aachen Center for Integrative Lightweight Production” (AZL)Aussteller/Exhibitor: Aachen Center for Integrative Lightweight Production (AZL) of RWTH Aachen UniversityReferenten/Speakers: Dr.-Ing. Michael Emonts, Dr.-Ing. Kai Fischer
2:30 - 3:00 Mechanical behavior of fibre reinforced plastics considering application-specific load casesAussteller/Exhibitor: Institute of Plastics Processing (IKV) at RWTH Aachen UniversityReferent/Speaker: Dipl.-Ing. Johannes Marder
3:00 - 3:30Textile technologies for multi material structuresAussteller/Exhibitor: Institut für Textiltechnik (ITA) der RWTH AachenReferent/Speaker: Dipl.-Ing. Christian Kochanek
3:30 - 4:003D-Fibre Spraying: Innovative preforming technique for an economic production of thermoplastic and thermo-set composite parts in high volumesAussteller/Exhibitor: Institute of Plastics Processing (IKV) at RWTH Aachen UniversityReferenten/Speakers: Dipl.-Ing. Marc Linus Fecher, Dipl.-Ing. Marco Pöhler
4:00 - 4:30Tapelaying: New multifunctional placement-head for processing of dry fibres and tapes with thermoplastic or thermoset matrixAussteller/Exhibitor: Fraunhofer Institute forProduction Technology (IPT)Referent/Speaker: Dipl.-Ing. Daniel Werner
4:30 - 5:00 High-volume production of automotive structures: Integrative approach for dimensioning and manufac-turing of a fully integrated engine hood by means of Gap-ImpregnationAussteller/Exhibitor: Institute of Plastics Processing(IKV) at RWTH Aachen University, Institute for Auto-motive Engineering (ika) of RWTH Aachen UniversityReferenten/Speakers: Dipl.-Ing. Robert Bastian, Dipl.-Ing. Kristian Seidel
5:00 - 5:30 Laser processing of composites: New technologies for cutting and joiningAussteller/Exhibitor: Fraunhofer Institute for Laser Technology (ILT)Referenten/Speakers: Dr.-Ing. Frank Schneider,Dipl.-Ing. Christoph Engelmann
5:30 - 6:00 Methods for process control and quality assurance by means of modern in-process metrologyAussteller/Exhibitor: Laboratory for MachineTools of RWTH Aachen University, Chair of Production Metrology and Quality ManagementReferenten/Speakers: Dipl.-Ing. Daniela Brehme,Dipl.-Ing. Andreas Witte
19
CADFEM Workshop
Der CADFEM Simulations-Workshop „Compositeseinfach modellieren und bewerten“ ist in diesem Jahr zum ersten Mal Teil des offiziellen Fachprogrammsder COMPOSITES EUROPE. Am 18. September 2013von 13:00 bis 17:00 Uhr findet die kostenloseVeranstaltung in der VIP-Lounge direkt auf dem Messegelände statt.
In dem Workshop erhalten Konstrukteure undProduktentwickler neben einem Überblick über die
Software ANSYS Composite PrepPost viele Tipps undTricks, wie Entwicklungsprojekte durch Simulationen effizienter gestaltet werden können. Das Themen-spektrum reicht vom Modellaufbau mit Material,Fasern und Lagen sowie Gewichts- und Kosten-kalkulationen bis zur simultanen Auswertung vonLagen, Versagenskriterien und Lastfällen.
Haben Sie Interesse am Workshop teilzunehmen?Dann besuchen Sie CADFEM in Halle 6, Stand D40.
20
Donnerstag / Thursday, 19.9.2013
Session: Ausstellervorträge / Exhibitor session
9:30 - 10:00 ACMA presents US Composites Industry Trends and InsightsAussteller/Exhibitor: ACMAReferentin/Speaker: Heather Rhoderick
10:00 - 10:30 Physikalische Oberfl ächenvorbehandlung mit Corona, Plasma oder Flamme: Wirkungsweise und AnwendungenAussteller/Exhibitor: Arotec GmbHReferent/Speaker: Dr. Werner Eckert
10:30 - 11:00 Non Destructiv Testing of composites - Thermography and SheorographyAussteller/Exhibitor: edevis GmbHReferent/Speaker: Dipl. Ing. Christian Spießberger
11:00 - 11:30 Innovative Leichtbauwerkstoffe auf Holz- u.Kunststoffbasis als Impulsgeber der MobilitätAussteller/Exhibitor: Shimadzu Europe GmbHReferent/Speaker: Prof. Dr. Walther
11:30 - 12:00Drive train with CFRP torque shaft for load transfer from rotor to generator of offshore wind turbine machinesAussteller/Exhibitor: Institut für Verbundwerkstoffe GmbHReferenten/Speakers: Dipl.-Sporting. Matthias Bendler
12:00 - 12:30 Encore® Prime, styrene-free product rangeAussteller/Exhibitor: CCP CompositesReferenten/Speakers: Urbain Coudevylle
12:30 - 1:00 Composite simulieren mit ANSYS Composite PrepPostAussteller/Exhibitor: CADFEM GmbH Referenten/Speaker:Dipl.-Ing. (TU) M.Eng Timo Frambach
13:00 - 1:30High productivity technologies for composites manufacturingAussteller/Exhibitor: CannonReferent/Speaker: N.N.
1:30 - 2:00Epovia® Optimum vinylester with carbon fi bresAussteller/Exhibitor: CCP CompositesReferent/Speaker: Guillaume Cledat
2:00 - 2:30 Ressourceneffi zienter Leichtbau für die ElektromobilitätResource-effi cient lightweight structures in the electromobilityAussteller/Exhibitor: TU DresdenReferenten/Speakers: Dipl. Ing. Sebastian Spitzer
2:30 - 3:00 Recyclable Epoxies for Sustainable Recyclable Composite ManufacturingAussteller/Exhibitor: Adesco Advansed MaterialsReferenten/Speakers: Frazer John Charles Barnes
3:00 - 3:30 Besser „Verbunden“ mit PlasmaAussteller/Exhibitor: Diener electronic GmbH + Co. KGReferenten/Speakers: Carlotta N. Dietel
COMPOSITES Forum Halle / Hall 6, Stand C28
Automakers are in overdrive to meet the U.S. federal mandate for a 54.5-mpg fleet average in the 2025MY. That’s in addition to a bevy of other upcoming governmental fuel economy and CO2 emissions regulations around the globe they and commercial vehicle makers alike must comply. Meanwhile, ever-rising gas prices have made increasing the effectiveness of fuel burned an even greater priority in the aerospace industry.
Mass reduction technology or lightweighting through the use of advanced materials is a promising path towards helping to lower fuel consumption and vehicle CO2 emissions.
From the first engine oil viscosity standards and common international material documents for increased aircraft production during WWI, SAE International has been at the forefront of the most significant vehicle technology advances for more than 100 years. Through its market-driven, voluntary consensus standards program and its library of mobility engineering information – the largest of its kind – SAE has worked hand-in-hand with the global aerospace and ground vehicle communities to solve its greatest transportation challenges.
And, it can do the same for industry’s quest for lighter, greener vehicles.
Advanced Materials standards & resources from SAE International.
THE QUEST FOR LIGHTER, GREENER VEHICLES LEADS TO THE SOCIETY FOR ADVANCING THE MOBILITY INDUSTRY.
Find these and much more at sae.org/news/advmtl/Composites Europe 2013, Booth 4/E31
22
Montag / Monday, 16.09.2013
Alle Vorträge werden simultan Deutsch/Englisch undEnglisch/Deutsch gedolmetscht.All lectures will be simultaneously interpreted from German into English and vice versa.
Raum / Room C1.1.2
10:00 - 10:15 Eröffnung und Begrüßung / Opening speech and welcomeDr. Michael Effing, AVK-Vorsitzender / AVK Chairman of the board, Frankfurt
Plenarvorträge / Plenary SessionsModeration: Dr. Michael Effing, AVK-Vorsitzender/AVK Chairman of the board, Frankfurt
10:15 – 10:50Composites-Marktentwicklungen und Trends in Europa und weltweitEuropean composites market developments and trends in Europe and worldwideGFK-Markt / GRP marketDr. Elmar Witten, AVK-Geschäftsführer / AVK Managing Director, FrankfurtCFK-Markt / CRP market Dr. Hans-Wolfgang Schröder, Geschäftsführer / Mana-ging Director, Carbon Composites e.V. (CCeV), Augsburg
10:50 - 11:20Trends auf dem nordamerikanischen Markt als Wachs-tumstreiber für Lösungen mit VerbundwerkstoffenTrends in the North American market which drive growth of composites solutionsDr. Ashish Diwanji, Vice-President Innovation / Vice President of Innovation, Owens Corning, Ohio
11:20 - 11:50 Kaffeepause / Coffee break
11:50 - 12:20Bedeutung von Normen für die Composites-IndustrieThe importance of standards to the composites industryProf. Dr. Jens Ridzewski, Abteilungsleiter Kunststoffe /Head of Plastics, IMA Materialforschung u. Anwendungs-technik GmbH, DresdenDr. Elmar Witten, AVK-Geschäftsführer / AVK Managing Director, Frankfurt
12:20 - 1:00 Hirnforschung und Führungskunst Brain research and the art of leadershipProf. Dr. Uwe Genz, Präsident / President, DVWO Dachverband der Weiterbildungsorganisationen e.V., Dreieich
1:00 - 2:15 Mittagspause / Lunch break
Reihe A / Series A - Raum / Room C1.1.2Anwendungen / Applications
Moderation: Dr. Joachim Zwecker, Business Manager Automotive Epoxy Systems, BASF SE, Ludwigshafen
2:15- 2:45LEO: Brandgeschützte Composite Bauteile mit herausra-genden mechanischen EigenschaftenLEO: fire protected composite components with excellent mechanical propertiesPeter Kornas, Produktmanager Brandschutzsysteme und Spezialprodukte / Productmanager Fire Retardants and Special Products, BÜFA Composite Systems GmbH & Co. KG, RastedeJörg Bünker, Leitung F & E / Head of R & D, Saertex GmbH & Co. KG, Saerbeck
2:45 - 3:15Composite Sitze aus Sicht von Johnson ControlsComposite seats from Johnson Controls point of viewAxel Köver, Manager New Technologies/Technology & Ad-vanced Development, Johnson Controls GmbH, Burscheid
3:15- 3:45Prothetische Produkte zwischen Alltag und HochleistungssportProthetic products between everyday and high performance sportsMaximilian Segl, Abteilungsleiter Composite / Experte für Faserverbundwerkstoffe / Fiber Composites Expert,Otto Bock HealthCare GmbH, Duderstadt
3:45 - 4:30 Kaffeepause / Coffee break
4:30 - 5:00SMC/BMC in der Innenausstattung von FlugzeugenSMC/BMC for aircraft interiorsBerend Schoke, Projektleiter Composites Interior / Project Manager Composites Interior, AirbusrOperation GmbH, Bremen
Plenarvortrag / Plenary Session - Raum / Room C1.1.2
5:00 - 5:45„The (Textile) Empire Strikes Back” – Composites vor demDurchbruch? „The (Textile) Empire Strikes Back” – Are Composites on the Verge of a Breakthrough?Peter Dornier, Hauptgeschäftsführer / General Manager,DORNIER GmbH, Lindau
5:45 - 6:30 Empfang / Reception
ab / from 6:30 AVK-Innovationspreisverleihung / AVK Innovation award ceremony
ab / from 7:30 COMPOSITES Night „AVK-Branchentreff” / ”AVK get-together”
International AVK Conference
International AVK Conference
Reihe B / Series B - Raum / Room C 7Materialien / Materials
Moderation: Dr. Gerd Esswein, Geschäftsleiter / General Manager, Freudenberg Forschungsdienste SE & Co. KG, Weinheim
2:15- 2:45Effizienter Leichtbau mit Schaumharz – leichter geht’s(fast) nicht!Efficient lightweight construction with foam resin - there’s (almost) nothing lighterHartmut Häberle, Technische Beratung Kunststoffanwen-dungen / Technical Consultant in Plastics Applications,MAN Truck & Bus AG, München
2:45 - 3:15Bauteilfertigung mit LCM: Faserverbundkomponentenanwendungsgerecht auswählenComponent Manufacturing via LCM: customized compo-nents for the application of fibre reinforced plasticsDr.-Ing. Eva Bittmann, Geschäftsführerin / Managing Director, Sachverständigenbüro werkstoff&struktur,Itzgrund
3:15- 3:45SMC mit geringen EmissionenLow Emission SMCGerard H. L. Reestman, Leiter Anwendungstechnik Closed Mould / Technical Service Manager Closed Mould, BYK-Chemie GmbH, Wesel
3:45 - 4:30 Kaffeepause / Coffee break
4:30 - 5:00Trends bei kurzfaserverstärkten HochleistungsthermoplastenTrends in short fibre reinforced,high performance thermoplasticsBert Havenith, Geschäfts- und InnovationsleiterAutomotive / Business & Innovation Manager Automotive, DSM, Sittard
Plenarvortrag / Plenary Session - Raum / Room C1.1.2
5:00 - 5:45„The (Textile) Empire Strikes Back” – Composites vor demDurchbruch?„The (Textile) Empire Strikes Back” – Are Composites on the Verge of a Breakthrough?Peter Dornier, Hauptgeschäftsführer / General Manager,rDORNIER GmbH, Lindau
5:45 - 6:30 Empfang / Reception
ab / from 6:30 AVK-Innovationspreisverleihung / AVK Innovation award ceremony
ab / from 7:30 COMPOSITES Night „AVK-Branchentreff” / ”AVK get-together”
Dienstag / Tuesday, 17.09.2013
Alle Vorträge werden simultan Deutsch/Englisch undEnglisch/Deutsch gedolmetscht.All lectures will be simultaneously interpreted from German into English and vice versa.
Reihe A / Series A - Raum / Room C1.1.2Anwendungen / Applications
Moderation: Dr.-Ing. Rudolf Kleinholz, AVK-Vorstand /AVK board, Frankfurt
9:00 - 9:30Interieursysteme: Nachhaltig innovativInterior Systems: Sustained innovativeDr. Isabella Schmiedel, Fachbereichsleitung Technologie und Innovationsmanagement / Head of Technology and Innovation Management Division, Dräxlmaier Systemtech-nik GmbH, Vilsbiburg
9:30 - 10:00Moderner Composites BootsbauModern Composite BoatbuildingSteffen Müller, Geschäftsführer / Managing Director, Knierim Yachtbau GmbH und Knierim Tooling GmbH, Kiel
Verfahren und Automation / Processes and automation
10:00 - 10:30Prozessstrategien zur Fertigung von duroplastischenHochleistungsfaserverbunden für die automobile GroßserieProcess strategies for manufacturing of high performan-ce composites for automotive mass productionMichael Karcher, akademischer Mitarbeiter / Academic Associate, Fraunhofer Institut für ChemischeTechnologie (Fh ICT), Pfinztal
10:30 - 11:00 Kaffeepause / Coffee break
Moderation: Dr. Tilman Schultz, Geschäftsführer / Managing Director, CEMO GmbH, Weinstadtr
11:00 - 11:30Technologien für den Leichtbau in mittleren SerienTechnologies for the production of lightweight structures in middle seriesDirk Thiesen, Leitung Entwicklung, Konstruktion / Head of Development, Design, FRITZMEIER Composite GmbH &Co., Bruckmühl/Hinrichssegen
11:30 - 12:00Unter Hochdruck leicht gemacht - Das High Pressure RTM-VerfahrenHigh pressure RTM for lightweightJens Winiarz, Vertriebsleiter Composite Spray Technology /Sales Manager Composite Spray Technology, HenneckeGmbH, Sankt Augustin
23
24
12:00 - 12:30Vision „automatisierter Werkzeugbau”„Automated vehicle construction” – The visionStephan Kegelmann, Geschäftsführer, Inhaber / Managing Director, Owner, Kegelmann Technik GmbH, Rodgau-Jügesheim
Plenarvortrag / Plenary Session - Raum / Room C1.1.2
12:30 - 1:30Podiumsdiskussion/Panel discussion:„Composites - Werkstoffe zwischen Wunsch und Wirklichkeit”„Composites - Materials Caught Between Dream and Reality”
1:30 - 2:30 Mittagspause / Lunch break
ab / from 2:30Möglichkeit zum Besuch der COMPOSITES EUROPE + HYBRID Expo 2013 /Opportunity to visit the COMPOSITES EUROPE + HYBRID Expo 2013
Reihe B / Series B - Raum / Room C 7Forschung für die Praxis / Research for practical applications
Moderation: Prof. Jens Ridzewski, Abteilungsleiter Kunststoffe/ Head of Plastics, IMA Materialforschung und Anwendungstechnik GmbH, Dresden
9:00 - 9:30Innovative Inline-Prozessketten zur flexiblen Fertigung thermoplastischer Composite-BauteileInnovative inline process chains for flexible production of thermoplastic composite componentsArne Böttcher, Gruppenleiter Faserverstärkte Thermo-plaste und PUR-Technologie/Group Manager Fiber Rein-forced Thermoplastics and PUR Technology, Institut für Kunststoffverarbeitung (IKV), Aachen
9:30 - 10:00Gleitziehbiegen endlosfaserverstärkter ThermoplasteDraw bending of fibre-reinforced thermoplasticsMarkus Junge, Wissenschaftlicher Mitarbeiter / Research Associate, Universität Siegen, Lehrstuhl für Umformtechnik
10:00 - 10:30Leichtbau in Mobilität und Fertigung - Ökologische AspekteEnvironmental aspects of lightweight construction in mo-bility and manufacturingMichael Baumann, Wissenschaftlicher Mitarbeiter / Research Associate, Fraunhofer Institut für Bauphysik (IBP), Stuttgart
10:30 - 11:00 Kaffeepause / Coffee break
Moderation: Prof. Dr. Helmut Schürman, Institutsleiter /Head of Institute,Technische Universität Darmstadt, Konstruktiver Leichtbau u. Bauweisen, Darmstadt
11:00 - 11:30Energieabsorptionsverhalten geflochtener CFK-RohreEnergyabsorpation of braided CFRP tubesBritta Kuckhoff, Wissenschaftliche Mitarbeiterin /Research Associate, Institut für Textiltechnik der RWTH Aachen University
11:30 - 12:00Untersuchungen zum Ermüdungsverhalten vonGurt-Steg-Klebverbindungen für Rotorblätter von Winde-nergieanlagenStudies into fatigue behaviour of bonded web-flange joints in wind turbine rotor bladesDr. Christof Nagel, Gruppenleiter Anwendung und Strukturberechnung / Group Manager Application and Structural Calculation, Fraunhofer IFAM, Bremen
12:00 - 12:30Beitrag zur Gestaltung keilförmiger Krafteinleitungen in hoch beanspruchten FaserverbundstrukturenA contribution to a wedge shaped load introduction in highly stressed composite structuresBenjamin Krebs, Wissenschaftlicher Mitarbeiter / Rese-arch Associate, Konstruktiver Leichtbau und Bauweisen - TU Darmstadt
Plenarvortrag / Plenary Session - Raum / Room C1.1.2
12:30 - 1:30 Podiumsdiskussion/Panel discussion:„Composites - Werkstoffe zwischen Wunsch undWirklichkeit”„Composites - Materials Caught Between Dream and Reality”
1:30 - 2:30 Mittagspause / Lunch break
ab / from 2:30Möglichkeit zum Besuch der COMPOSITES EUROPE +HYBRID Expo 2013 /Opportunity to visit COMPOSITES EUROPE + HYBRID Expo 2013
International AVK Conference
Tomorrow’s aircraftinteriors industryin the making
1-3 OCTOBER 2013
Organised by: co-located with:
Be part of the only dedicated aircraft interiors event in the Americas region, taking place in Seattle the hub of aviation, October 1-3, 2013.
If you are interested in exhibiting at Aircraft Interiors Expo Americas 2013 contact Daniel Kazimierczak on +44 (0) 208 910 7132 or [email protected]
Interested in exhibiting?
register to attend atwww.aircraftinteriorsexpo-us.com/ce13
26
China Pavilion (Hall 6, B36)
Adesso Advanced MaterialsWuxi Co.,Ltd 6/B36jAramicore Composites Co., LTD 6/B36gCCPIT 6/B36iJiangsu ChanghaiComposite Materials Co., Ltd 6/B36dJiangsu Jiuding New Material Co Ltd. 6/B36hKunshan Deta Metal Technology Co. Ltd. 6/B36cLIANYUNGANG TIANHONG TUBES INDUSTRY Co., Ltd. 6/B36fTaixing Youngsun FL-Plastics Co., Ltd. 6/B36eUniversal star group limited 6/B36aZhejiang Hengdian Imp&Exp Co., Ltd 6/B36b
French Pavilion (Hall 4, D20)
CCP Composites 4/D20aDUTHEL MAINTENANCE MOULES 4/D20ePlasticon France SA 4/D20d
Holland Pavilion (Hall 4, A36)
BIJL Profi elen BV 4/A32CT Platon GmbH 4/B37DEMO AREA Holland Pavilion 4/A39Dutch Thermoplastic Components 4/A38MBM 4/A36PFT Profi les BV 4/A34TEN CATE Advanced Composites 4/B34TPRC 4/B36Van der Mast Industrial Innovations 4/B38VKCN 4/A36
Italy Pavilion (Hall 6, G02)
Assocompositi 6/C02Carus Srl 6/D02CEL Components S.r.l. 6/E04ELANTAS ITALIA Srl 6/B01Industria Chimica Reggiana I.C.R SPA 6/B02Maroso srl 6/C03mates italiana srl 6/E02Panini S.R.L. 6/C01PLASTIC GLASS S.r.l. 6/D01SELCOM S.r.l. 6/G01Terruzzi Fercalx S.P.A 6/E01
Junge Innovative Unternehmen (Hall 6, G24)
2R-Tec GmbH & Co. KG 6/F175AXperformance GmbH 6/F19Advanced Compounding Rudolstadt GmbH 6/G25ASP Plastics GmbH 6/F15Carbonlack Dobler e.k. 6/F18Compositence GmbH 6/E16Edevis GmbH 6/E18Exact Plastics GmbH 6/F24Faserverbund Innovations UG 6/E14Grasse Zur Ingenieurgesellschaft mbH 6/G17Hengstmann Solutions GmbH 6/F21HP-Textiles GmbH 6/E24iNDTact GmbH 6/F23KS-Präzisionstechnik GmbH & Co. KG 6/F16NB-Carbon 6/G19WeightWorks Engineering 6/G23
Länderpavillons / International Pavilions
28
Die American Composites ManufacturersAssociation ACMA ist der größte Industrieverband für Verbundmaterialien. Die ACMA ist gemeinsam mit der SAMPE Veranstalter der CAMX – The Composites & Advanced Materials Expo. Deren Premiere fi ndet vom 13. bis 16. Oktober 2014 in Orlando, Florida, USA statt und ersetzt die Früh-jahrsmessen und –ausstellungen sowohl der ACMAals auch der SAMPE. Die CAMX ist die Veranstaltungfür die Vernetzung und Förderung unterschiedlicherFachbereiche der Verbund- und neuen Werkstoffe in Nord- und Südamerika: Forschung und Entwicklung,Techniker, Hersteller, Dienstleister und Endverbrau-cher. Für alle Anwenderindustrien – Transport, Luft-und Raumfahrt, Schiffbau, Windenergie, Software, Bauwesen und Infrastruktur, Medizin, Wissenschaft,Sport und Freizeit – ist die CAMX Amerikas obli-gatorische Veranstaltung für Produkte, Lösungen, Networking und zukunftsgerichtetes Branchendenkenfür alle Bereiche des Marktes. Die Veranstaltung bie-tet ein fachtechnisches Konferenzprogramm, einenMarktplatz für Geschäftschancen, Produktpräsenta-tionen und -demonstrationen, ebenso wie Zugang zuden Fachleuten der Märkte für Verbund- und neueWerkstoffe und den Endverbrauchermarkt.
Mit Unterstützung der Aussteller des USA-Pavillons laden wir Sie am 18. September um 15.00 Uhr auf unserem Pavillon ein. Dort werden Ihnen Erfrischun-gen und nähere Informationen über Verbundwerkstof-fe in den USA und die CAMX geboten.
www.thecamx.orgwww.acmanet.org
ACMA, the American Composites Manufacturers Association, is the largest trade association representing composite materials. ACMA, along with SAMPE, are both co-producers of CAMX – The Composites & Advanced Materials Expo. Its inaugural launch takes place October 13-16, 2014, in Orlando, Florida, USA and takes the place of both the ACMA and SAMPE spring conferences and exhibitions. CAMX is the one source for connec-ting and advancing all aspects of the world’s Composites and Advanced Materials communities in the America’s: R&D, engineering, manufacturing, service providers and end-users. Regardless of the application – transportation, aerospace, marine, wind energy, software, construction and infrastruc-ture, medical, academics, sports and leisure – CAMX is America’s go-to event for pro-ducts, solutions, networking, and advanced industry thinking for all market segments. The event provides an expert technical conference program, a market-place for business opportunities, product displays and demonstrations, and access to professionals within the composites, advanced materials, and end use markets.
Thank you to the exhibitors in the US Pavilion! Stop by at the Pavilion at 03.00 pm on September 18 for refreshments and to learn more about US composites and CAMX.
www.thecamx.orgwww.acmanet.org
Länderpavillons / International Pavilions – ACMA
ACMA Lounge 6/G39c
KNF FLEXPAK CORPORATION 6/G39d
McClean Anderson 6/G39e
Phoenix Equipment Co. 6/G39a
Smart Tooling 6/G39b
www.thecamx.org
October 13–16, 2014: Conference / October 14–16, 2014: ExhibitsOrlando, Florida / Orange County Convention Center
UNSURPASSED INNOVATIONCOMBINED STRENGTH
ACMA and SAMPE have come together to create a singular,
unified event designed to engage and promote the composites
and advanced materials industry. CAMX will be the one source
for connecting and advancing all aspects of the world’s
composites and advanced materials communities.
PLAN NOW TO ATTEND.
30
Die COMPOSITES EUROPE bietet mit der RecruitingArea einen speziellen Bereich an, indem Unter-nehmen und Studenten, Absolventen, YoungProfessionals und erfahrene Arbeitnehmer dieMöglichkeit haben sich kennen zu lernen.
Von der hauseigenen Online Jobbörse, über denBewerbungsmappen-Check für Studenten durch die Recruiting Agentur KAISER STÄHLER an allen drei Messetagen, bis zum spannenden Speed Inter-viewing und der anschließenden Recruiting Reception in entspannter Atmosphäre ist alles dabei.
Halle 6, Empore
Der Bereich ist an allen Messetagen geöffnet.
Highlights:Mittwoch, 18. September
14:00 -16:00 Uhr: Speed Interviewing
16:00 -18:00 Uhr: Recruiting Reception + Unternehmenspräsentationen
Sie fi nden aktuelle Stellenausschreibungen u.a. von folgenden Unternehmen:
Visit the Recruiting Area at COMPOSITES EUROPE! This is a platform where composites companies and students, graduates, young professionals and experts get together.
It includes everything from an own Online Job Market, checking of student job application fi les by the recruiting agency KAISER STÄHLER on every day of the trade fair to exciting Speed Interviews followed by a Recruiting Reception in a relaxed atmosphere.
Hall 6, Gallery
The area is open on all three days of the trade fair.
Highlights:Wednesday, 18th September
2:00 - 4:00 pm:Speed Interviewing
4:00 – 6:00 pm: Recruiting Reception + company presentation
You will fi nd job vacancies from the following companies:
COMPOSITES EUROPE Recruiting Area
Hier fi nden Sie Ihr „Perfect Match“ / That’s where you fi nd the “perfect match”
In cooperation with:
Für Entscheider in Einkauf, Logistik, Materialwirtschaft
www.allaboutsourcing.de
2 Ausgaben
kostenlos testen!
SourcingLieferanten Logistik Länder
All about
32
Publizieren Sie Ihre Messeteilnahme am richtigen Ort – schnell, direkt, online
Im Zeitalter von web2.0 wird es immer wichtiger, Informationen den richtigen Zielgruppen so schnellund prägnant wie möglich zukommen zu lassen.
Seien Sie präsent im World Wide Web!
BlogIn unserem Blog finden Sie wichtige Informati-onen rund um die Messe, Pressemitteilungen und Interviews mit interessanten Persönlich-keiten aus der Industrie.http://blog.composites-europe.com
TwitterInformationen in Echtzeit: Kurze und aussage-kräftige Tweeds von COMPOSITES EUROPE mit 140 Zeichen über die aktuellen Entwicklungenauf der Messe. Sind Sie bereits unser Follower?www.twitter.com/ceshow
XINGAls Unterstützer der Composites-Professional- Groups, nimmt COMPOSITES EUROPE aktiv an den Dialogen teil. Senden Sie uns Ihr Firmen-profil und seien Sie dabei, wenn Experten ihre Erfahrungen austauschen.www.xing.com/net/composites
FacebookDas Netz nicht mehr nur für die junge Genera-tion. Finden Sie neue Impulse und werden Sie ein „Fan“ der COMPOSITES EUROPE.www.facebook.com/composites
YouTubeBevorzugen Sie Videos an Stelle von Texten? Beeindrucken Sie Ihre Kunden mit dem Anblick von COMPOSITES EUROPE durch Bild und Ton.www.youtube.com/user/compositeseurope
LinkedInAls Unterstützer der Composites-Professional-Groups, nimmt COMPOSITES EUROPE aktiv an den Dialogen teil. Senden Sie uns Ihr Firmenprofil und seien Sie dabei, wennExperten ihre Erfahrungen austauschen.www.linkedin.com – Groups: Composites / Composites Industry Forum
Sind noch Fragen offen? Dann kontaktieren Sie uns: [email protected]
Communicate your trade show participation at the right place – fast, direct, online
In the age of web2.0, it will become more and more important to distribute information to the right target groups immediately and concisely.
Demonstrate your presence in the World Wide Web!
BlogHere you find current composites information, COMPOSITES EUROPE news, industry develop-ment and cases, interviews and more.http://blog.composites-europe.com
TwitterInformation in real time: Short and concise tweeds of COMPOSITES EUROPE with 140 characters about the current developments on the exhibition. Are you already our follower?www.twitter.com/ceshow
XINGAs supporter of the Composites-Professional- Groups, COMPOSITES EUROPE takes an active part in the dialogues. Send us your company profile and be present, when experts exchange their experiences.www.xing.com/net/composites
FacebookThe social network not only for the young generation anymore but where you find young impulses. Become a “Fan” of COMPOSITES EUROPE. www.facebook.com/composites
YouTubeDo you prefer video instead of text? Impress your customers with the vision of COMPOSITES EUROPE through video and sound.www.youtube.com/user/compositeseurope
LinkedInAs supporter of the Composites-Professional- Groups, COMPOSITES EUROPE takes an active part in the dialogues. Send us your company profile and be present, when experts exchange their experiences.www.linkedin.com – Groups: Composites / Composites Industry Forum
Any questions? Do not hesitate to contact us: [email protected]
COMPOSITES EUROPE Social Media Network
Ihre kostenlose Messe AppYour free Trade Show App
COMPOSITES EUROPE App
www.composites-europe.com
Organiser:
34
Allgemeine Informationen / General Information
Allgemeine Informationen / General InformationInformation Counter Eingang Ost /Foyer East EntrancePhone: +49 711 18560 -7401
Bankautomat / Bank MachineMessegelände, Atrium / Fair ground, Atrium
COMPOSITES EUROPE Messeleitung / Show ManagementHalle / Hall 4, Stand / Booth C01Phone: +49 211 90191-226Fax: +49 211 90191-122
Datum & Öffnungszeiten / Date & Opening Hours17. - 19. September 2013Besucher / Visitors 9 am - 6 pm Aussteller / Exhibitors 8 am - 7 pm
Erste Hilfe / First Aid Messe StuttgartDeutsches Rotes Kreuz / German Red CrossPhone: +49 711 18560-2199
Feuerwehr / Fire BrigadeNotruf / Emergency Call 112
Messe Stuttgart Feuerwehr / Fire BrigadePhone: +49 711 18560-7777
Flughafen / AirportStuttgart AirportPhone: +49 1805 948 444 (14 ct/Min aus demdt. Festnetz, Mobilfunk max. 42 ct/Min)www.stuttgart-airport.com
Fundbüro / Lost & FoundHauptwache / MainguardPhone: +49 711 18560-3500
Hotel- & Anreiseinformationen / Hotel & Travel informationCOMPOSITES EUROPE Travel CenterIna StollePhone: + 49 211 90191-281Fax: + 49 211 90191-282E-Mail: [email protected]
Katalogverkauf nach der Messe / Catalogue Sales after the EventReed Exhibitions Deutschland GmbHEmpfang / ReceptionVölklinger Straße 4, 40219 Düsseldorf, GermanyPhone: +49 211 90191-0Fax: + 49 211 90191-123E-Mail: [email protected]
Kiosk / KioskMesse-Shop, AtriumPhone: +49 711 18560-3129
Kopier & Fax Service / Copy & Fax ServiceBusiness Center AtriumPhone: +49 711 18560-3000 Price: Copy, b/w: 0,20 €Fax: 1,00 € (Germany)
Parken / ParkingAPCOA Autoparking GmbHPhone: +49 711 94845-06Fax: +49 711 7252892
Polizei / PoliceNotruf / Emergency Call: 110
Polizeirevier Flughafen-StuttgartFlughafenstraße 3670629 StuttgartPhone: +49 711 78780-0
Presse Lounge / Press LoungeVIP Lounge Eingang Ost / East EntrancePhone: +49 211 90191-221Fax: +49 211 90191-138
Restaurant / RestaurantRestaurant am Wasser, Eingang Ost / East EntrancePhone: +49 711 18560-3121
Taxi Service / Taxi ServicePhone: +49 711 566 061, +49 711 557728
Unfälle / AccidentsNotruf / Emergency Call 112
Daten & Fakten / Facts & Figures
For more than 10 years EURAILmag has provided a comprehensive view of the European rail industry. Delivering technical information on the news, developments and activities in the sector is what we do.
You can now access the back copy of all our published issues on line. Simply click to search for articles and reports, and stay up to speed on how the market is shaping up for tomorrow.
VISIT OUR WEBSITE FOR FREE ACCESS TO OUR BACK COPY, EXCLUSIVE CONTENT, ANNUAL AGENDA, AND EXTRA INFORMATION ON THE RAIL MARKET.
Information is one step towards a solution
@EURAILmag Adeline Lavolée www.EURAILmag.com
36
Daten & Fakten / Facts & Figures
Anreise / Travel information
Autobahn / Motorway
A8, Exit „Airport/Messe“
Für das Navigationssystem / For navigation system:Landesmesse Stuttgart GmbHFlughafenstraße70629 Stuttgart
Flughafen / AirportVom Stuttgarter Flughafen aus ist das Messegeländesehr gut zu Fuß erreichbar.Stuttgart Airport is in walking distance to the fairground.
Zug / RailVom Stuttgarter Hauptbahnhof geht es mit der S-BahnS2 oder S3 in Richtung Stuttgart Flughafen/Messe Stuttgart. Stuttgart Central Station, S2 or S3 to „StuttgartFlughafen/Messe”
Veranstaltungsort / VenueLandesmesse Stuttgart GmbHMessepiazza 170629 Stuttgart, GERMANY
Aussteller Service / Exhibitor service
Audiovisuelle Geräte / Audiovisual EquipmentSOUNDLIGHT COMPANY GmbHPhone: +49 7042 2886-77Fax: +49 7042 2886-70
Blumen Dekoration / Flower Decoration Scheiermann GbRPhone: +49 2054 12558-0Fax: +49 2054 12558-15
Bodenbelag / Teppich / Floor Covering / CarpetingSystem Standbau Gesellschaft mbHPhone: +49 211 8766790-235 Fax: +49 211 8766790-239
Bohren von Löchern in den Hallenboden / Drilling holes in the hall floor Schneider MetallbauPhone: +49 711 18560-3400
Catering / CateringARAMARK Restaurations GmbHPhone: +49 711 18560 3100Fax: +49 711 18560 3111
Druckluft / Compressed airMader GmbH & Co. KGPhone: +49 711 7972-129Fax: +49 711 7972-241
Elektronik Dienst / Electrical ServiceZiegler Systemhaus GmbHPhone: +49 711 18560-3550 Fax: +49 711 18560-3559
Foto Dienst / Foto ServiceLars Behrendt FotografiePhone: +49 2651 49881Fax: +49 172 2427702
Hostessenservice / Hostess ServiceKJS Marketing Phone: +49 2054 920 147Fax: +49 2054 920 148
Internet (kabelgebunden) / Internet (wired)Berner KommunikationPhone: +49 711 18560-3000
Internet (kabellos) / WLAN accessM3 Connect GmbHPhone: +49 711 18560 3902
Kirchliche Dienste / Church Services Forum der Kirchen / Church Forum (Eingang Ost,rechts unten im Atrium / Entrance East, rightcorner of atrium, ground floor)
Church information and meeting point
Encounter
Andachtsraum – Raum der Stille (gegenüber der Gardero-be) / Chapel - Room of Tranquillity (opposite cloak room)
12:45 Pause for Reflection - 15 minute prayer
(MIZRACH) und muslimischen Glaubens (QIBLA) / Pla-ce of prayer for guests - also for those of the Jewish (MIZRACH) and Muslim (QIBLA) faiths
Ansprechpartner für das Team der Kirchlichen Diensteauf der Messe / Contact person for the churchservices team at the Exhibition Centre:Diakon / Deacon Martin Heubach +49 176 - 632 99 353
Mehrwertsteuerrückerstattung / VAT RefundMalcom Flux Quipsound LtdThe Crown Building, London Road. Westerham, Kent,TN 16 1UT, United KingdomPhone: +44 1959 561717Fax: +44 1959 564740
Mietmöbel / Furniture to hireSystem Standbau Gesellschaft mbHPhone: +49 211 8766790-235 Fax: +49 211 8766790-239
Daten & Fakten / Facts & Figures
Pressebüro / Press OfficeReed Exhibitions Deutschland GmbHChristian ReissPhone: +49 211 90191-221Fax: +49 211 90191-138
Reinigungsdienst / Cleaning Servicedias Gebäudemanagement GmbHPhone: +49 711 18560-3630 Fax: +49 711 18560-3639
Sanitär Installationen / Sanitary Installations Hermann Jörg GmbH Phone: +49 711 896510-0Fax: +49 711 896510-40
Service Center / Service CenterMesse StuttgartPhone: +49 711 18560-2444 Fax: +49 711 18560-2623
Sicherheitsdienst / Security ServiceS.O.B. Objektschutz GmbHPhone: +49 711 220099-0Fax: +49 711 220099-22
Speditions-Dienstleistungen / Freight Forwarding Services SCHENKER Deutschland AGPhone: +49 711 18560-3300 Fax: +49 711 18560-3349
Standbau / Stand ConstructionSystem Standbau Gesellschaft mbHPhone: +49 211 8766790-235 Fax: +49 211 8766790-239
Telekommunikation und Hardware / Telecommunication and Hardware Berner TelekommunikationPhone: +49 711 18560-3000 Fax: +49 711 18560-3030
Videoservice / Video ServiceML Videoservice Phone: +49 2173 1699660Fax: +49 2137 1699663
Zoll / Customs ClearanceSCHENKER Deutschland AGPhone: +49 711 18560-3300 Fax: +49 711 18560-3349
www.english.uncm.ru www.uncm.ru [email protected]
The Union assists in problems solving and creates the favorable conditions for development of each enterprise — the Union’s member
Anzeige / Advert
Übersichtsplan / Orientation Plan & Highlights
COMPOSITES EUROPEHighlights der Messe / Highlights of the Exhibition
Halle / Hall 4
Product Demonstration Area 4/PDA_A-FRebooking Area 4/C01French Pavilion 4/D20AVK Innovation Awards 4/C41 u. 4/D41Holland Pavilion 4/A36
Halle / Hall 6
Italy Pavilion 6/G02China Pavilion 6/B36Innovation made in Germany Pavilion 6/G24COMPOSITES Forum 6/C28Media Pavilion 6/C30ACMA Pavilion 6/G39Recruiting Area Gallery
Foyer Eingang Ost / Foyer Entrance East
Product Demonstration Area PDA_Foyer_1-6VIP/Press Lounge
HYBRID Expo Highlights der Messe / Highlights of the Exhibition
Halle / Hall C2
HYBRID Forum C2/D07Product Demonstration Area C2/B01Media Pavilion C2/A16
38
P
P
S
P
P
P
VIP
TOR1
Eingang/Entrance
AVK-Tagung/Conference16.09. – 17.09.2013
Servicebüro/Service OfficeBusiness Center, Messe Stuttgart
Visions become reality.
Hallenverzeichnismit Ausstellerfirmen
Floorplan with exhibitors
Halle | Hall 4
40
Eingang/gg E// nEE trtt arr nce HaHH llll 4ll/E// xEE ixx t HaHH llll 4
_PDA_C
4/E35
4/F09
4/B21
ÜBE
RGAN
GH
ALLE
6
4/A01
4/A02
4/A04
4/B03
4/A06
4/A10
4/B07
4/B05
4/B11
4/B04
4/C02
ABCDEF
4/C08
4/D06
4/D10
4/A12
4/B15
4/A18
4/B14
4/B18
4/B16
4/C17
4/C15
4_PDA_B
4/E40 4/D40
4/B29
4/A24
4/A20
4/A30
4/A26
4/B26
4/C18
4/D29
4/B30
4/D38
4/D25 4/B244/C21
4/D23
4/E36
4/B37
4/B40
4/A37
4/A21
4/A11
4/F24
4/F20
4/C014/D01
4/C414/D414/E414/F43
4/C22
4/A39
4/A08
4/F01
4/F05
4/F19
4/D30
4/F29
4/D22
4/E24
4/F21
4/C14
4/F23
4/D07
4/C12
4/D15
4/D13
4/F174/
F14
4/F02
4/F18
4/F04
4/D244444/E2744
4/C13
4/A28
4/A32
4/B22
4/B32
4/A25
4/A35
4/A33
4/A31
4/E22
4/F25
4/F31
4/E30
4/E28
4/E26
4/E42
4/F41
4/E32
4/E34
4/F39
4/F35
4/F42
4/F28
4/F36
4/F26
4/B34
4/B43
4/B41
4/E29
43
4/D024/E02 4/E01
4/D26
4/E31
4/A15
4/F03
4/E17
4/B364/
B38
4/A34
4/A36
4/AA38
4/C044/D05
4_PDA_AAAA
4_PDA_E
4_PDA_F
4/D20a
4/D20d
4/D20e
4/B06
4/D03
4/B25
4/B08
Eingang Halle 6/66EnEE trtt anrr ce HaHH llll 6
PDPP ADD - PrPP odurr ct Demom nstrtt arr titt oii n Arerr a
HoHH llanll d PaPP vilvv ill oii n
FrFF enrr chcc Pavilvv ill oii n
WC
WC
4/A16
4/E33
4/B12
4/C28
4/E25
4/F07
4/B42
4/A14
4/D16
4/D144/F11
4/A4AA 4
PDPP ADD - PrPP orr duct Demonstrtt arr titt oii n Arerr a
Länderpavillons / InII ternrr atitt onal PaPP vivv lii ill ons
Rebookinkk g Arerr a
AVKVV InnoI vavv titt onspss rerr isi / AVKVV InnoI vavv titt oi n Awards
Produktsegmentierung / Product Areas 4g g / :
Chemische Grund Produkte, Harze & Verbrauchsmaterialien /Resins, Basic Chemicals & Disposables
Faser, Faserprodukte /Fibre, Fibre Products
CFK / CFRP
Beschichtung & Klebstoffe /Coating / Bonding
44/D36
4/B09
Halle | Hall 4
41
+Composites c/o INM Leibniz-Institut für
Neue Materialien gGmbH 4/A33
3A Composites GmbH 4/B43
3B Fibreglass 4/B03
3D-CORE Extended Structured Composites3D CORE Extended Structured Composites
GmbH & Co.KG 4/A06
ACC Technologies GmbH & Co. KG 4/C02
Acrosoma NV Structural Composite Technologie 4/F29
„adhäsion KLEBEN & DICHTEN“
Springer Fachmedien Wiesbaden GmbH 4/A04
Advanced Composites Solutions Srl 4/F31
AFBW Allianz Faserbasierte Werkstoffe
Baden-Wüttemberg e.V. 4/C02
Airtech Europe Sarl 4/C21
Akademische Fliegergruppe Stuttgart e.V. 4/B08
Altair Engineering GmbH 4/C02
altropol Kunststoff GmbH 4/B29
anowo ltd 4/F20
AOC LLC International Office 4/E36
AUTEFA SOLUTIONS GERMANY GMBH 4/F11
AVK - Industrievereinigung
Verstärkte Kunststoffe e.V. 4/C41, 4/D40, 4/D41
AXSON Technologies Axson GmbH 4/B22
BASALTEX NV 4/D01
BASF SE 4/B26
Bcomp Ltd. 4/D05
BIJL Profielen BV 4/A32
Braca-Sport LTD 4/F02
BREYER GmbH Maschinenfabrik 4/D36
BST ProControl GmbH 4/F11
BÜFA Composites GmbH & Co KG 4/D38, 4/PDA_F
c2i s.r.o. Composites Innovations
International 4/A10
Carbolight GbR 4/D40b
CARBOMID - BIRLIK TICARET TURK AS 4/F26
Carbon Composites e.V. 4/B04
Carbopress Composites SRL 4/D06
CCP Composites 4/D20a
Cetex Institut für Textil- und
Verarbeitungsmaschinen gGmbH 4/D03
CFK-Valley Stade e.V. 4/D40f
CHOMARAT Textiles Industries 4/B30
Compositech Srl 4/C04
COMPOSITES EUROPE
- Messeleitung / Show Management - 4/C01
COMPOSITES EUROPE
- Product Demonstration Area - 4/PDA Foyer
COMPOSITES EUROPE - Rebooking Area - 4/C01
„Composite World“ Union of Composites
Manufacturers (UNCM) 4/A35
COMPOSYST GmbH 4/B12
Connova AG 4/B04
CORIOLIS COMPOSITES SAS 4/B04
CSA COMPOSITE 4/E01
CT Platon GmbH 4/B37
Cytec 4/B21
Dantec Dynamics GmbH 4/C02
DBF - Deutsche Basalt Faser GmbH 4/D03
Delcotex Delius Techtex GmbH & Co. KG 4/F14
DELTA-PREG S.P.A. UNINOMINALE 4/C14
DG Flugzeugbau GmbH 4/F04
DIAB GmbH 4/F25
Diener electronic GmbH + Co KGDiener electronic GmbH + Co. KG
Plasma-Surface-Technology 4/B09
Die Wethje GmbH Kunststofftechnik 4/B04
DOWAKSA ILERI KOMPOZIT MALZEMELER
SAN. TIC. A.S 4/E25
Dow Europe GmbH
The Dow Chemical Company 4/D40c
Dutch Thermoplastic Components 4/A38
DUTHEL MAINTENANCE MOULES 4/D20e
EATC European Alliance for Thermoplastic
Composites c/o AVK e.V. 4/A44
ebalta Kunststoff GmbH 4/A18
EBF Dresden GmbH Forschung, Entwicklung,
Erprobung 4/D03
ECTA Handelsgesellschaft GmbH 4/D40a
Elmatex GmbH Electronic und Maschinen
für die Industrie 4/F11
ELOVIS GmbH Längen- und
Geschwindigkeitsmesstechnik 4/F11
Emil Frei GmbH & Co. KG 4/D26
EPTA European Pultrusion Technology
Association c/o AVK e.V. 4/F43
Esterlössl GmbH 4/A02
EuCIA European Composites Industry
Association 4/D40e
Europea D.o.o. 4/E32
Euro-RTM-Group c/o AVK e.V. 4/PDA_B
Evonik Industries AG 4/B16
EVS - ELBIT VISION SYSTEMS LTD. 4/F11
FARRL GmbH 4/F41
Fiber Engineering GmbH 4/C02
Flugzeug-Union Süd GmbH EADS Deutschland 4/B12
FluidSystems GmbH & Co. KG 4/A37
FORMAX 4/E02
Forschung für die Zukunft c/o
Martin-Luther-Universität Halle 4/C22
Forum Technologie und Wirtschaft e.V.
BasaltFaserNetzwerk 4/D03
Fraunhofer Entwicklungszentrum
Röntgentechnik EZRT 4/B04
Fraunhofer-Institut für Werkstoff- und
Strahltechnik IWS 4/B04
FutureCarbon GmbH 4/F42
Halle | Hall 4
42
G. Angeloni Srl 4/C08
Gustav Gerster GmbH & Co. KG
Geschäftsbereich Gerster TechTex 4/D05
GMA Werkstoffprüfung GmbH 4/C13
Gößl & Pfaff GmbH 4/A11
GRM Systems s.r.o. 4/F21
Güth & Wolf GmbH 4/E29
Gurit (UK) 4/D07
HACO S.a.r.l. 4/F17
HACOTECH GmbH 4/C17
HARKE Chemicals GmbH 4/D23
Heidelberger Druckmaschinen AG 4/C02
HELD SYSTEMS GmbH 4/B04
Heraeus Noblelight GmbH 4/B04
HEXAGON DEVOLD AS 4/D14
Hexcel Composites SA 4/D29
hhp home health products AG 4/A26
Hilger u. Kern GmbH 4/D30
Hochschule Magdeburg-Stendal (FH)
KAT-Kompetenzzentrum an der
Hochschule Magdeburg-Stendal 4/C22
Holding Company Composite 4/F23
Holland Composites Pavilion 4/A32, 4/A34, 4/A36,
4/A38, 4/A39, 4/B34, 4/B36, 4/B37, 4/B38
ICD / ITKE Universität Stuttgart 4/C02
IHK Reutlingen,
Cluster Technische Textilien Neckar-Alb 4/A20
Incotelogy Ltd. Basalt Fiber Products 4/E27
India Composites Show Organiser
Reed Manch Exhibitions (P) Ltd 4/E28
Innotect GmbH 4/F39
Institut für Kunststoffverarbeitung
RWTH Aachen 4/D30,
4/PDA_A,
4/PDA_C
ITCF Institut für Textilchemie- und
Chemiefasern 4/C02
ITV Institut für Textil- und Verfahrenstechnik 4/C02
Jost Chemicals GmbH 4/E30
Kaneka Belgium NV 4/F36
Karl Mayer Textilmaschinenfabrik GmbH 4/B04
KauPo Plankenhorn e.K. 4/B40
KEGELMANN TECHNIK GmbH 4/A14
Kelteks d.o.o. tvornice tekstila 4/D13
Klieverik Heli B.V. 4/F11
KÖMMERLING CHEMISCHE FABRIK GMBH 4/D24
KREMPEL GmbH 4/D10
KRÜSS GmbH Wissenschaftliche Laborgeräte 4/E26
Lange+Ritter GmbH Faserverstärkte Kunststoffe 4/D29
Lantor B.V. 4/D40g
Leichtbauzentrum Baden-Württemberg -
LBZ-BW e.V. 4/C02
„lightweight design“
Springer Fachmedien Wiesbaden GmbH 4/A04,
6/C30
Media Pavilion
Lord Germany GmbH 4/E33
Maag Technic GmbH 4/B05
MAI Carbon 4/B04
Van der Mast Industrial Innovations 4/B38
MITSUBISHI GAS CHEMICAL CO., INC. 4/F28
Mitsubishi Rayon Co. Ltd. 4/D22
Momentive Speciality Chemicals Gmbh 4/E42
Mondi 4/E41
Mühlmeier Composite 4/B14
Münch Chemie International GmbH 4/B24
Multi-Plot Europe GmbH 4/F11
Munich Composites GmbH 4/D02
Mybusinessmedia 4/A36
Nabertherm GmbH 4/A21
NECUMER GmbH 4/F19
Nief Plastic Group 4/B07
Norafin Industries (Germany) GmbH 4/D03
NORD COMPOSITES 4/B25
NOVACOM Verstärkte Kunststoffe GmbH 4/D40d
PANADUR GmbH 4/E40
Paul Bauder GmbH & Co. KG 4/B42
PD FibreGlass P-D Glasseiden GmbH Oschatz 4/D15
Peak Technology GmbH 4/B04
Permabond Engineering Adhesives LTD 4/A25
PFT Profiles BV 4/A34
Plasticon France SA 4/D20d
Premier Hose Technologies Ltd. 4/A15
Pultex Kunststofftechnikhandel GmbH 4/F35
P+Z Engineering GmbH 4/B04
Q-WA 4/A21
RAMPF Tooling GmbH & Co. KG 4/A12
Reichhold AS 4/C28
RH Schneidtechnik 4/PDA_E
SAE International 4/E31
Schüchl Maschinenbau 4/A31
Scigrip Adhesives Limited 4/E24
Secar Technologie GmbH 4/F09
SGL TECHNOLOGIES GmbH 4/F01
SICOMIN EPOXY SYSTEMS 4/B41
Siemens PLM Software 4/B04
Sigmatex (UK) Ltd 4/F05
Halle | Hall 4
43
Sika Deutschland GmbH 4/A24
SILTEX Holzmüller W. GmbH & Co KG
Flecht-u. Isoliertechnologie 4/B15
SKM GmbH Schwergewebe Konfektion
Moers GmbH 4/F03
SKZ - Das Kunststoff-Zentrum 4/E22
Spheretex GmbH 4/C28
Springer Fachmedien Wiesbaden GmbH 4/A04
STS - Textiles 4/D03
Suchy Textilmaschinenbau GmbH 4/F11
SWAP (Sachsen) GmbH Verbundwerkstoffe 4/E17
TAMSEN MARITIM GmbH 4/F24
TCR Composites 4/B11
Technische Universität Dresden Institut für
Leichtbau und Kunststofftechnik 4/C22
Technische Universität Dresden Institut für
Werkzeugmaschinen und Steuerungstechnik 4/C22
Technische Universität Ilmenau Fakultät
Maschinenbau - Fachgebiet Kunststofftechnik 4/C22
TenCate Advanced Composites 4/B34
Tissa Glasweberei AG 4/A01
Toho Tenax Europe GmbH 4/C12
Toray International Europe GmbH 4/D16
TPRC THERMOPLASTIC COMPOSITES
RESEARCH CENTER 4/B36
Trans-Textil GmbH 4/B12
TU Chemnitz Institut für Strukturleichtbau
und Kunststoffverarbeitung 4/F03
Umicore Specialty Materials Brugge 4/E35
Union of Composites Manufacturers (UNCM) 4/A35
Friedrich-Schiller-Universität Jena
Physikalisch-Astronomische Fakultät Institut
für Materialwissenschaft und Werkstoff-
technologie 4/C22
Universität Rostock Lehrstuhl
Konstruktionstechnik/ Leichtbau 4/C22
VELOX GmbH 4/B18
VOSSCHEMIE GmbH 4/C28
Weiss Chemie + Technik GmbH & Co. KG 4/A16
WELA Handelsgesellschaft mbH 4/A28
Wihag Composites GmbH & Co. KG 4/F07
Wolfangel GmbH 4/B32
W. Piekenbrink GmbH 4/D25
Zaklady Laminatów Poliestrowych
TROKOTEX Sp. z.o.o. 4/F18
Zoltek Zrt. 4/C15
See you in 2014!
COMPOSITES EUROPE7 - 9 Oct 2014 | Messe Düsseldorf
9th European Trade Fair & Forum for
Composites, Technology and Applications
Organiser: Partners:
Anzeige / Advert
44
Halle | Hall 6
6/C24
6/F43
6/E44
6/B08
/ 2
6/A/ 04
WC
WW
Imbi
ss
ÜBE
RGAN
GH
ALLE
4
6/A01
6/A09
6/A// 21
6/A33
6/G32
6/G244
6/G04
6/G02
6/A4AA 0
6/A36
6/A14
6/A126/B15
6/A10
6/B17
6/C12
6/B016/C01 6/B026/C026/D016/E01 6/D02
6/A08
6/B13
6/B11
6/B20
6/B18
6/C08
6/C06
6/F27
6/E14
6/G29
6/F156/F166/G17
6/E166/F176/F186/G19
6/E246/F236/F24
6/G25
6/E18
6/F19
6/F216/G23
6/G27 6/F25
6/E30
6/E28 6/D26
6/C22
6/D22
6/D16
6/E12
6/A26
6/A24
6/A22
6/A16
6/B23
6/B19
6/E09
6/G09
6/E10
6/C28
6/D36
6/C306/D34
6/E39
6/D32
6/D04
6/E04
6/B28
6/B346/E40
6/E38
6/G33
6/G31
6/A30
6/A28
6/B26
6/B22
6/B2446/C2333
6/G39e
6/E36
6/G37
6/B37
6/A326/B31
6/F50
6/F46
6/G45
6/G41
6/F44
6/F42
6/B36 g
6/E48 6/C40
6/C38
6/D416/D42
6/C36
6/D396/D40
6/D376/D38
6/B04
6/A// 066/B07
6/C10
6/D06
6/F45
6/E46
6/E02
6/A03
6/A11
6/A23
6/A37
6/G08
6/G06
6/G36
6/G38
6/B27
6/D28
6/E05
6/D08
E 6/B10
6/B25
6/C03
6/E08
6/G01
6/G39c
6/G39a
6/G39d
6/G39b
6/G07
6/B36 f
6/B36 h
6/B36 i
6/B36 d
6/B36 jjj
6/B36 a 6/
B36 c
6/B30
6/C29
6/E34
6/E326/F29
6/F31
6/B36 b
6/G49
6/G05
6/E06
6/D126/B12
2 6/C14
6/D14
6/F47
6/C11
6/B1666/C17
6/B144
6/C15
6/C13
4 6/C16
6/B36 e
6/B436/C42
Junge Innovative /made in Germanyy
USUU / ACMC AMM Pavilivv oii n
ChCC inii a PaPP vilivv oii n
WC
Eingang/E// nEE trtt arr nce HaHH llell 6Ausgang/E// xEE ixx t HaHH llll 6
Itatt lyl PaPP vilivv oii n
Eingang Halle 4/44EnEE trtt arr nce HaHH llll 4
6/D10
6/D23
ABCDEFG
COMPMM OSITETT SEE FORUMU , MeMM didd ai PaPP vilivv oii n, Recruiting Area
Länderpavillons / Internrr atitt onii al PaPP vilivv onii s
Produktsegmentierung / Product Areas 6:g g /
Technologie & Automatisierung /Technology & Automation
Halbzeuge- & Zwischenprodukte /Semi-Finished & Intermediate Products
CAD / CAM
Recruiting Area 6/Gallery
6/G036////AA022
6/EEEE11
J
Halle | Hall 6
45
2R-Tec GmbH & Co. KG 6/F17
3A Composites Airex AG 6/A04
5AXperformance GmbH 6/F19
ACMA American Composites Manufacturers
Association 6/G39c
Adesso Advanced Materials Wuxi Co.,Ltd 6/B36j
ADETE Advanced Engineering & Technologies
GmbH 6/D38
„adhäsion KLEBEN & DICHTEN“
Springer Fachmedien Wiesbaden GmbH 6/C30
Media Pavilion
„A+D+M“ Publicomm S.r.l. 6/C30
Media Pavilion
ADM-ISOBLOC GmbH Anlagen für
Dosieren und Mischen 6/D26
Advanced Compounding Rudolstadt GmbH 6/G25
„Aerospace Manufacturing“
MIT Publishing Ltd. 6/C30
Media Pavilion
„All about Sourcing“
Network Press Germany GmbH 6/C30
Media Pavilion
all ahead composites GmbH
bike ahead composites 6/G04
Aramicore Composite Co., LTD. 6/B36g
Arcotec GmbH 6/G29
ARISTO Graphic Systeme GmbH & Co. KG 6/E08
ASC Process Systems 6/B14
ASP Plastics GmbH 6/F15
ASS Maschinenbau GmbH 6/G06
Assocompositi Italian Industry Composites
Association 6/C02
AT - Automation Technology GmbH 6/C13
Atom Stanz- und Schneidesysteme GmbH 6/A08
„AUTOCAD & Inventor Magazin“
WIN-Verlag GmbH & Co.KG 6/C30
Media Pavilion
AUTOMATICA - 6. Internationale Fachmesse für
Automation und Mechatronik Messe
München GmbH 6/G45
„AutomobilKONSTRUKTION“
Konradin Verlag R. Kohlhammer GmbH 6/C30
Media Pavilion
„Automobil Industrie“
Vogel Business Media GmbH & Co. KG 6/C30
Media Pavilion
„AVR Allgemeiner Vliesstoff-Report“
dpw-Verlagsgesellschaft mbH 6/C30
Media Pavilion
Barthels-Feldhoff GmbH & Co. KG 6/C36
J.H. vom Baur Sohn GmbH & Co. KG 6/C36
Beinlich Pumpen GmbH 6/B12
BELOTTI SPA 6/E32
Bercella s.r.l 6/G38
brainLight GmbH 6/A14
BREBECK Composite s.r.o. 6/F25
Busse Heizplattentechnik GmbH 6/C42
Butzer Engineering Systems GmbH 6/E36
CADFEM GmbH 6/D40
CAM ELYAF SAN. A.S. SISECAM 6/D22
CANNON DEUTSCHLAND GMBH 6/A24
CANNON SPA 6/A24
Carbonlack Dobler e.k. 6/F18
Carus Srl 6/D02
Cato Composite Innovations BV PO Box 26 6/D12
CCPIT China Council for the Promotion
of International Trade 6/A21, 6/B36i
CEL Components S.r.l. 6/E04
CG TEC GmbH Carbon- & Glasfasertechnik 6/B04
„www.chemiaibiznes.com.pl“
EPS Media Ewelina Plonska-Stepulak 6/C30
Media Pavilion
„chemie & more“ succidia AG 6/C30
Media Pavilion
China National Building Materials and
Equipment Import & Export Corp 6/C29
Chromaflo Technologies B.V. 6/A40
Cluster Neue Werkstoffe Bayern
Innovativ Gesellschaft für Innovation
und Wissenstransfer mbH 6/B04
CMS Deutschland GmbH 6/A11
COLUMBUS Handelsgesellschaft m.b.H. 6/G32
COMPOSE 6/D23
Compositence GmbH 6/E16
COMPOSITES EUROPE - Forum - 6/C28
COMPOSITES EUROPE - Recruiting Area - 6/Gallery
„Composite Solutions“ CREI srl 6/G49, 6/C30
Media Pavilion
„Composite World“ Union of Composites
Manufacturers (UNCM) 6/C30
Media Pavilion
„construction materials, equipment,
technologies of 21 century“
AK marketing & consult 6/C30
Media Pavilion
CORATEC AG Verbundelemente Technologie 6/B34
COREX-HONEYCOMB a devision of Encocam Ltd. 6/F42
CoTexx GmbH 6/B04
CREI - Centro Ricerche Editoriali
Internazionali Srl 6/G49, 6/C30
Media Pavilion
CrossLink Faserverbundtechnik
GmbH & Co. KG 6/D41
Cuttec GmbH 6/F31
Dassault Syst mes Deutschland GmbH 6/C12
DBK David + Baader GmbH 6/G03
DD-Compound UG 6/E14
DEKUMED Kunststoff- und
Maschinenvertrieb GmbH & Co. KG 6/C38
DELIGNIT BLOMBERGER HOLZINDUSTRIE
B. HAUSMANN GMBH & CO. KG 6/C17
„Die BRÜCKE“
Feliciter Kiadó/ Feliciter Publishing Ltd. 6/C30
Media Pavilion
Dieffenbacher GmbH Maschinen- und
Anlagenbau 6/C10
„Digital Engineering“
WIN-Verlag GmbH & Co.KG 6/C30
Media Pavilion
„Digital Manufacturing“
WIN-Verlag GmbH & Co.KG 6/C30
Media Pavilion
DJK Europe GmbH 6/G41
DURAtec AG 6/B24
DYNA-MESS Prüfsysteme GmbH 6/F43
edevis GmbH 6/E18
ELANTAS ITALIA Srl 6/B01
ELKOM Heizplattentechnik GmbH 6/E44
EM-Systeme GmbH 6/A16
EMSZ - Association of the Manufactures
of Reinforced Plastic Materials 6/D39
ERBO GmbH 6/B27
A. Erglis GmbH 6/D04
„EURAILmag“ Blu Line & Bro 6/C30
Media Pavilion
EURO-COMPOSITES S.A. 6/D32
Exact Plastics GmbH 6/F24
Exel Composites Plc 6/A32
„FAPU - Fachmagazin für die
Polyurethanindustrie“ KP Verlag 6/C30
Media Pavilion
fibretech composites GmbH 6/B23
Fill Gesellschaft m.b.H. 6/C06
First COMPOSITES GmbH 6/B31
Fraunhofer-Gesellschaft zur Förderung
der angewandten Forschung e.V. 6/A02
Fraunhofer Institut für Chemische
Technologie (ICT) 6/A02
Fraunhofer Institut für Fertigungstechnik
und Angewandte Materialforschung IFAM 6/A02
Fraunhofer-Institut für Betriebsfestigkeit
und Systemzuverlässigkeit LBF 6/A02
Fraunhofer Institut für Techno- und
Wirtschaftsmathematik ITWM 6/A02
Fraunhofer-Institut für Werkstoffmechanik
IWM 6/A02
Fraunhofer-Institut für ZerstörungsfreieFraunhofer Institut für Zerstörungsfreie
Prüfverfahren IZFP 6/A02
Fraunhofer IPA Projektgruppe
Prozessinnovation 6/B04
Fraunhofer-Institut für
Produktionstechnologie IPT 6/A02
FRIMO Group GmbH 6/E11
„GAK - Gummi Fasern Kunststoffe“
Dr. Gupta Verlag 6/C30
Media Pavilion
46
Halle | Hall 6
Gaugler & Lutz oHG 6/A04
GEISS AG 6/A03
Germa Composite GmbH 6/C40
Granta Design Ltd. Material Intelligence 6/D42
Grasse Zur Ingenieurgesellschaft mbH 6/G17
GUHDO GmbH 6/B37
GUNNAR International Weissenberger AG 6/E05
Alfred Härer GmbH, Werkzeug-und
Formenbau Haero Carbon GmbH 6/G04
„HANSA“ Schiffahrts-Verlag „Hansa“
GmbH & Co. KG 6/C30
Media Pavilion
Hedrich Group Hedrich GmbH 6/A28
Hengstmann Solutions GmbH 6/F21
Hennecke GmbH 6/D16
HG GRIMME SysTech GmbH 6/F29
Höfer Presstechnik GmbH 6/C16
Hofer Textilveredelung GmbH 6/B04
Hoza Cutter GmbH 6/A16
HP-Textiles GmbH 6/E24
HUBER+SUHNER AG Business Unit
Composites 6/E30
Hufschmied Zerspanungssysteme GmbH 6/E40
IBT.InfraBioTech GmbH 6/G05
IFC Composite GmbH 6/D28
iNDTact GmbH 6/F23
Industria Chimica Reggiana I.C.R SPA 6/B02
„Industrial Engineering News“
Thomas Industrial Media GmbH 6/C30
Media Pavilion
„Industriemagazin“
Industriemagazin Verlag GmbH 6/C30
Media Pavilion
Institut für Verbundwerkstoffe GmbH
TU Kaiserslautern 6/B07
intec Bielenberg GmbH & Co. KG 6/A36
„Interceram“ Expert Fachmedien GmbH 6/C30
Media Pavilion
Isowood GmbH 6/B28
ITALPRESSE S.p.A 6/D14
„Jahresmagazin Ingenieurwissenschaften
Deutschland - Kunststofftechnologie“
ALPHA Informationsgesellschaft mbH 6/C30
Media Pavilion
Jakob Winter GmbH 6/B28
JETCAM 6/F27
Jiangsu Changhai Composite Materials
Holding Co.,ltd. 6/B36d
Jiangsu Jiuding New Material Co Ltd. 6/B36h
Johns Manville Slovakia AS 6/B11
Gottfried Joos Maschinenfabrik
GmbH & Co. KG 6/F45
Kaiser Stähler
Rekrutierungsberatung GmbH Gallery Halle 6
Karlsruhe Institute of Technology (KIT) 6/G37
Keim Kunststofftechnik GmbH 6/A10
Kelheim Fibres GmbH 6/E36
„KEM Konstruktion Entwicklung Management“
Konradin Verlag R. Kohlhammer GmbH 6/C30
Media Pavilion
„Keramische Fachzeitschrift“
Expert Fachmedien GmbH 6/C30
Media Pavilion
„KI - Kunststoff Information“
Kunststoff Information
Verlagsgesellschaft mbH 6/C30
Media Pavilion
KNF FLEXPAK CORPORATION 6/G39d
„Konstruktionspraxis“
Vogel Business Media GmbH & Co. KG 6/C30
Media Pavilion
Gummiwerk KRAIBURG GmbH & Co. KG 6/B04
KraussMaffei Technologies GmbH 6/C08
KSL Keilmann Sondermaschinenbau GmbH 6/G08
KS-Präzisionstechnik GmbH & Co. KG 6/F16
F.A. Kümpers GmbH & Co. KG 6/E36
KÜNDIG GmbH 6/A26
Kunshan Detai Metal Technology Co.,Ltd 6/B36c
„KunststoffXtra“ SIGWERB GmbH 6/C30
Media Pavilion
KURIS Spezialmaschinen GmbH 6/G07
KVT-Fastening AG A BOSSARD COMPANY 6/E34
„K-Zeitung“ Giesel Verlag GmbH 6/C30
Media Pavilion
LAMILUX Composites GmbH 6/B04
Langzauner GmbH 6/B20
LAP GmbH Laser Applikationen 6/F46
Maschinenfabrik Lauffer GmbH & Co.KG 6/C23
Lefatex-Chemie GmbH 6/E36
LIANYUNGANG TIANHONG TUBES
INDUSTRY Co., Ltd. 6/B36f
LIBA Maschinenfabrik GmbH 6/B04
Linn High Therm GmbH 6/G36
Lucintel 6/F44
Magnum Venus Plastech 6/A33
Mahr Metering Systems GmbH 6/B13
MAKA Systems GmbH 6/A01
MAPAL Präzisionswerkzeuge Dr. Kress KG 6/B43
Maroso srl 6/C03
mates italiana srl 6/E02
McClean Anderson 6/G39e
Mehler Engineering + Service GmbH 6/C14
Telateks A.S. Office Hamburg -
METYX Composites 6/C24
Maschinenfabrik Herbert Meyer GmbH 6/B30
MICADO SMART ENGINEERING GmbH 6/D34
„MM Maschinenmarkt“
Vogel Business Media GmbH & Co. KG 6/C30
Media Pavilion
Moritz Diamantwerkzeugherstellung OHG 6/E39
MUBEA CARBO TECH GMBH 6/B18
Mybusinessmedia 6/C30
Media Pavilion
Nanjing Loyalty Composite Equipment
Manufacture Co. Ltd. 6/A21
NB-Carbon 6/G19
NETZSCH-Gerätebau GmbH 6/B17
Neue Materialien Bayreuth GmbH 6/B04
OBO-Werke GmbH & Co. KG 6/E36
Oerlikon Barmag Zweigniederlassung
der Oerlikon Textile GmbH & Co. KG 6/A23
Optris GmbH 6/F47
ORMAMACCHINE S.p.A. 6/A30
PADE - CNC 6/C11
Panini S.R.L. 6/C01
Phoenix Equipment Co. 6/G39a
PRECUPA Technology GmbH 6/B20
„PIE – Plastics Information Europe“
Kunststoff Information
Verlagsgesellschaft mbH 6/C30
Media Pavilion
Halle | Hall 6
47
Pinette Emidecau GmbH 6/C22
“PITTURE E VERNICI-EUROPEAN COATINGS”
CREI srl 6/G49, 6/C30
Media Pavilion
Plascore GmbH & Co KG 6/G33
„ www.plastech.pl“
Plastech Pawel Wisniewski 6/C30
Media Pavilion
PLASTIC GLASS S.r.l. 6/D01
„Plastiques & Caoutchoucs“
INFOPRO COMMUNICATIONS 6/C30
Media Pavilion
„PU Magazin“ Dr. Gupta Verlag 6/C30
Media Pavilion
Quadrant Plastic Composites AG 6/B22
Rebstock Consulting GmbH & Co.KG 6/A22
Reichenbacher HAMUEL GmbH 6/G09
Reinforced Plastics 6/C30
Media Pavilion
RESPECTA Maschinenbau GmbH 6/B25
RH Schneidtechnik 6/A16
Robuso Stahlwarenfabrik
Buntenbach & Sohn GmbH 6/G31
„roofing & insulating material“
AK marketing & consult 6/C30
Media Pavilion
R+S Technik GmbH 6/B28
RUCKS Maschinenbau GmbH 6/B26
RUWAC Industriesauger GmbH 6/B19
SAATI S.p.A. 6/E28
SAERTEX GmbH & Co. KG 6/A06
SAMPE 6/C30
Media Pavilion
Sandvik Process Systems Division of SMTSandvik Process Systems Division of SMT
Deutschland GmbH 6/E10
SAT 6/E48
Schaumform GmbH 6/B16
Scherenmanufaktur PAUL GmbH 6/A37
Schneider Form GmbH Kunststoff- und
Druckgussformen 6/E06
Schönherr Textilmaschinenbau GmbH 6/D06
Schott & Meissner Maschinen- und
Anlagenbau GmbH 6/E09
Schuler SMG GmbH & Co. KG 6/D10
Schwindt CAD/CAM-Technologie GmbH 6/C12
SELCOM S.r.l. Multiaxial Technology 6/G01
Shimadzu Europa GmbH 6/G27
Siempelkamp Maschinen- und
Anlagenbau GmbH & Co. KG 6/B10
Smart Tooling 6/G39b
Springer Fachmedien Wiesbaden GmbH 6/C30
Media Pavilion
Stäubli Tec-Systems GmbH Connectors 6/D06
Stükerjürgen Aerospace GmbH & Co. KG 6/E46
superTEX composites GmbH 6/D37
SWMS Systemtechnik
Ingenieurgesellschaft mbH 6/E36
Taixing Youngsun FL-Plastics Co., Ltd. 6/B36e
TARTLER GmbH 6/D08
Tebis AG 6/C15
Terruzzi Fercalx S.P.A 6/E01
ThermHex Waben GmbH 6/E38
TK Industries GmbH 6/B04
topcut-bullmer GmbH 6/A12
Transcat PLM GmbH 6/C12
TUBUS WABEN GmbH & Co.KG 6/D36
Union of Composites Manufacturers (UNCM) 6/C30
Media Pavilion
Universal star group limited 6/B36a
Vaber Industriale SPA 6/C03
VDID - Verband Deutscher Industrie
Designer e.V. 6/F50
VDMA e.V. Forum Composites Technology 6/B08
verlag moderne industrie GmbH 6/C30
Media Pavilion
„VIA MARE BY SEA“ – CREI srl 6/C30
Media Pavilion
VSE Volumentechnik GmbH 6/B12
Weber Manufacturing Technologies Inc. 6/A09
WeightWorks Engineering F. Dietze 6/G23
„Werkstoffe der Fertigung“ HW-Verlag 6/C30
Media Pavilion
WICKERT Maschinenbau GmbH 6/E12
Kunststoffverarbeitung Wimmer GmbH 6/D04
Wissner Gesellschaft für Maschinenbau mbH 6/B43
ZCK Zuschnittcenter u.
SFaserverbundtechnik Gmbh & Co. KG 6/B04
Zhejiang Hengdian GBF Basalt Fibre Co. Ltd 6/B36b
48
P
P
PVIP
Eingang/Entrance
Freigelände/Outdoor area
AVK-Tagung/Conference16.09. – 17.09.2013
Product Demonstration Area
Zusätzliche Ausstellungsfl ächen
Additional Presentations
Product Demonstration Area
Eingang Ost / Entrance East
HP-Textiles GmbH PDA_Foyer_1
ICD / ITKE Universität Stuttgart PDA_Foyer_2
CCP Composites PDA_Foyer_3
Technische Universität Dresden
Institut für Leichtbau und Kunststofftechnik PDA_Foyer_4
Ester Lößl GmbH PDA_Foyer_5
FRIMO Group GmbH PDA_Foyer_6
Freigelände / Outdoor Area
Acrosoma NV
TEN CATE Advanced Composites
HYBRID Expo
Halle C2 / Hall C2
Leichtbau BW GmbH
Landesagentur für Leichtbau C2/B13 HYBRID Expo
Visions become reality.
AphabetischesAusstellerverzeichnis
Alphabetical list of exhibitors
50
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitors
A
+Co - 3ac
3A Composites Airex AG
Industrie Nord 26
5643 Sins, Switzerland
Tel.: +41 41 789 66 00
Fax: +41 41 789 66 60
E-Mail: [email protected]
Web: www.corematerials.3acomposites.com
Halle / Stand 6/A04
3A Composites GmbH
Alusingenplatz 1
78224 Singen, Germany
Tel.: 0049 7731 802254
Fax: 0049 7731 803803
E-Mail: [email protected]
Web: www.alucore.com
Halle / Stand 4/B43
Unternehmensschwerpunkt der 2R-Tec GmbH & Co. KG ist die Serienfertigung von Bauteilen auf Basis von Faserverbundwerkstoffen (sowohl Thermo- als auch Duroplaste). Besondere Expertise liegt in der Verarbeitung von Carbon und Aramid.Abgedeckt werden sämtliche Prozessschritte: Auslegung des Bauteiles, Konstruktion des Formwerkzeuges, Werkzeugbau, Fertigung der Faserverbundbauteile bis hin zur Oberflächenveredelung. Alle Produkte sind „Made in Germany“. Ein speziell für die besonderen Anforderungen des „Rapidformverfahrens“ entwickelter hochmoderner Ma-schinenpark ermöglicht eine flexible Umsetzung der jeweiligen Projektanforderungen mit extrem kurzen Rüstzeiten. 2R-Tec greift auf eine langjährige Erfahrung im BereichFaserverarbeitung, Kunststofftechnik sowie Formen-und Vorrichtungsbau zurück. Einer der Standbeine des Unternehmens ist die Entwicklung, Produktion und der Vertrieb von hauchdünnen (0,4 mm) Carbon Cover für Smartphones des Premium Segments.
2R-Tec GmbH & Co. KG
Hornweg 4a
35232 Dautphetal, Germany
Tel.: +496466911466
E-Mail: [email protected]
Web: www.2r-tec.eu
Halle / Stand 6/F17
The objective of the +Composites project is to encourage technology transfer from „technological excellence centres“ to companies, especially SMBs in North West Europe. To achieve the project‘s objectives, 4 main axis of transnational cooperation have been defined: Business Intelligence Unit; Education; Awareness and transfer of technology; Business relations. +Composites relies on the technological centresof excellence and on the dynamics that they have created in their area of expertise,whilst providing a favourable climate to generate the necessary synergies, which will allow to reach a dynamic exchange system. The objective of this project is to encourage technology transfer from these networks to SMBs in North West Europe.„Technological excellence centres“ are public or private laboratories, research centresfrom universities or engineering schools, secondary schools, competitiveness clusters, which all specialize in the field of composites materials.
+Compositesc/o INM Leibniz-Institut für Neue Materialien GmbHCampus D2 2
66123 Saarbrücken, Germany
Tel.: 0681 9300 0
Fax: 0681 9300 223
E-Mail: [email protected]
Web: www.inm-gmbh.de
Halle / Stand 4/A33
51
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitors3bf - Acc
A
ACC Technologies gehört zu einer Gruppe von Firmen in Deutschland und im benachbarten europäischen Ausland die hauptsächlich in der Textilindustrie tätig sind.Wir beschäftigen uns mit der Konstruktion und Entwicklung industrieller Verfahren zur Herstellung von Bauteilen aus Faserverbundwerkstoffen, hauptsächlich aus Carbon-fasern und Glasfasern. Aufgrund der hohen Anisotropie von Faserverbundwerkstoffen arbeiten wir ausschließlich mit lastfalloptimierten Strukturen. Unsere Kunden sind hautpsächlich im Maschinenbau, in der Autoindustrie, derMedizintechnik und im Sportgerätebau zu finden. Alle Entwicklungen sind kunden-spezifisch, d.h. wir entwickeln die Bauteile und das dazugehörende Fertigungs-verfahren und übergeben beides den Kunden nach Fertigstellung in deren Produktion. Wir arbeiten dabei mit verschiedenen Forschungsinstituten wie dem ITV Denkendorf, dem ITCF Denkendorf, der TU München, dem Institut für Fügetechnik in Osnabrück und weiteren Entwicklungspartnern zusammen.
ACC Technologies GmbH & Co. KG
Fronäckerstr. 50
71063 Sindelfingen, Germany
Tel.: 07031 795 - 5
E-Mail: [email protected]
Web: www.acc-technologies.de
Halle / Stand 4/C02
Wir sind spezialisiert auf die präzise Fräsbearbeitung von Carbon Rohteilen unter Einhaltung hoher Form- und Lagetoleranzen wie sie z.B. im Anlagen- und Gerätebau gefordert werden. Desweiteren liefern wir Inserts und Tools für die Composite-Ferti-gung. Die Werkstoffe reichen von Carbon über Alu und Edelstähle bis zu Titan. EineBesonderheit sind unsere durch additive manufacturing / EBM hergestellten Titan Inserts zur Optimierung der Klebeverbindung.
5AXperformance GmbH
Ammerthalstraße 19
85551 Kirchheim, Germany
Tel.: +49 89 44131262
Fax: +49 89 45217305
E-Mail: [email protected]
Web: www.5AXperformance.de
Halle / Stand 6/F19
Schaum in einer neuen Dimension
Das ideale Strukturschaum-System für Luftfahrt, Marine, Automotive und andereLeichtbauanwendungen.
3D-COREExtended Structured Composites GmbH & Co.KGOststr. 70
32051 Herford, Germany
Tel.: 05221 9363-90
Fax: 05221 9363-91
E-Mail: [email protected]
Web: www.3D-CORE.com
Halle / Stand 4/A06
3B-the fibreglass company is a leading developer and supplier of fibreglass productsand technologies for the reinforcement of thermoplastic and thermoset polymers. This entrepreneurial company operates three manufacturing facilities in Belgium,Norway and India as well as a R&D Centre located at the heart of Europe. With a fully dedicated Customer Service Centre, 3B is a dynamic company with a rich heritage in fibreglass development and production as well as a special commitment tosupporting its customers.The company operates eco-responsible E-CR glass technologies in all its facilities and manufactures the unique eco-friendly and high performance glass HiPer-tex™ in its Norwegian plant. 3B glass products combine durability with eco-responsibility and versatility, making them the materials of choice for a wide range of industries. With a sound foundation of unique assets, 3B is committed to design reliable and durable fibreglass solutions available globally. www.3b-fibreglass.com
3B Fibreglass
Rue de Charneux 59
4651 Battice, Belgium
Tel.: 0032 49 55 87 292
Fax: 0032 87 67 51 10
E-Mail: [email protected]
Web: www.3b-fibreglass.com
Halle / Stand 4/B03
52
Acm - Ade
A
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitors
Die ADETE - Advanced Engineering & Technologies GmbH, Kaiserslautern, Germany, ist eines der führenden Entwicklungs-Dienstleistungsunternehmen im Bereich Kunststoff- und Faserverbund-Engineering. Entsprechend dem ganzheitlichen Ansatzeines Full-Service-Anbieters bestehen die Geschäftsfelder des Unternehmens ausden Bereichen Engineering & Metall-Substitution, Experten-Service und Fertigung. Zu den Kernkompetenzen von ADETE gehört die durchgängig rechnergestützte werk-stoff- und fertigungsgerechte Substitution von Metall-Strukturen durch innovativeKunststoff-Lösungen. Ziel hierbei ist die Schaffung wirtschaftlich zu fertigender Thermo- und Duroplast-Leichtbau-Konstruktionen. Dabei stehen nicht ein bestimmterKunststoff oder ein spezielles Fertigungsverfahren im Vordergrund, sondern die für die jeweilige Anforderung am besten geeignete Bauweise. Kunden von ADETE gehören vornehmlich den Branchen Automobilbau, Maschinen- und Anlagenbau, Marinetechnik sowie der Luft- und Raumfahrt an.
ADETEAdvanced Engineering & Technologies GmbHOpelstrasse 1a
67661 Kaiserslautern, Germany
Tel.: 06301 7168 0
Fax: 06301 7168 29
E-Mail: [email protected]
Web: www.adete.com
Halle / Stand 6/D38
Adesso Advanced Materials UK Co. Ltd. is the subsidiary company of Adesso Advanced Materials Wuxi Co. Ltd. in the United Kingdom, established on 8th May 2013, functi-oning as a local company for business development in the Europe. Adesso AdvancedMaterials Wuxi Co. Ltd. (Formerly called Wuxi Adesso Nanotech Co. Ltd.) one of the ‘Wuxi 530 Program Grant (Category A, 2009)’ winner companies, was founded in April 2010 with registered capital of 34 million RMB (5.5 million USD). Since then, we have successfully developed the revolutionary re-workable and recyclable epoxy resin sys-tems, i.e. RecyclosetTM, which are particularly designed for applications in manufactu-ring the next generation sustainable fiber reinforced epoxy composites. RecyclosetTM technology is based on our patent pending novel curing agents, i.e. CleavamineTM.Adesso Advanced Materials is the first and the only manufacturer of these unique products in the world. Adesso was award the JEC-Asia Innovation Award in 2012.
Adesso Advanced Materials Wuxi Co.,Ltd
5TH FLOOR, BLDG. C, XINGYE LOU 97 LINGHU AVENUE,
NEW DISTRICT
WUXI 214135, China
Tel.: +86 510 8538 2409
Fax: +86 510 8538 6163
E-Mail: [email protected]
Web: www.adessomaterials.com
Halle / Stand 6/B36j
Acrosoma is a global specialist in the design, development and manufacturing of structural composite structures. The innovative qualities of the composite materials that are used are fully exploited in the realization of new applicational projects, with composite technology now evolving well beyond what was even thought possible twodecades ago.
Acrosoma nv has successfully developed a cost effective and continuous productiontechnology to produce 3D stitched sandwich panels that have less weight and minimalthermal expansion.
On top of that, Acrosoma engineering has also performed in-depth theoretical and applied research to explore the mechanical and thermal behaviour of 3D sandwich panels.
Acrosoma NVStructural Composite TechnologieIndustriepark E 17/2 Wolfsakker 2
9160 Lokeren, Belgium
Tel.: 0032 9340 4330
Fax: 0032 9340 4331
E-Mail: [email protected]
Web: www.acrosoma.com
Halle / Stand 4/F29
ACMAAmerican CompositesManufacturers Association1010 North Glebe Rd Suite 450
Arlington VA 22201, United States
Tel.: 001 703 525 0511
Fax: 001 703 525 0743
E-Mail: [email protected]
Web: www.acmanet.org
Halle / Stand 6/G39c
53
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsAdh - Adv
A
ACR GmbH ist ein mittelständisches Unternehmen aus Thüringen, Spezialist auf dem Gebiet der Herstellung von naturfaserverstärkten Compounds (NFC) für den Einsatz inder kunststoffverarbeitenden Industrie.Der wichtigste Vorteil der technischen Möglichkeiten von ACR GmbH liegt in der Fähigkeit der Einarbeitung von Naturlangfaser, wie Hanf, Flax, Zellulose, Baumwolle,Viskose etc. in Polymeren, welche mit den Standard-Verfahren nicht gegeben ist. Eine über die Jahrzehnte entwickelte Technologie und eine weltweit einzigartige Technik ermöglicht die Herstellung von Verbundwerkstoffen, basierend auf Naturfa-sern und Plastomeren - POLYWOOD®-Compounds. Diese sind für den Einsatz in derSpritzgießtechnik, Blasextrusion und Profilextrusion als Ersatz zu den konventionellen Hochleistungskunststoffen entwickelt worden.
Advanced Compounding Rudolstadt GmbH
Prof.-Hermann-Klare-Str. 13
07407 Rudolstadt, Germany
Tel.: +49 3672 31459 54
Fax: +49 3672 31459 71
E-Mail: [email protected]
Web: www.advanced-compounding.com
Halle / Stand 6/G25
ADM-ISOBLOC is one of the leading global suppliers of machinery & technology to thecomposite, building, construction and several other industries. With nearly 60 years of experience, the family business offers state-of-the-art equipment and innovation. Inmore than 50 countries machines with recipe-controlled continuous metering, mixing and degassing for reactive resin bonded mixtures from very low up to high filler cont-ent are successfully producing for satisfied customers. Moreover, there is no limitation to filler hardness while absolutely void-free blends are guaranteed through the newdeveloped vacuum system. R & D and realization of custom designed solutions in thefield of thermosetting and thermoplastic resins provide a basis for optimal customer support. The wide range of services covers all phases of an industrial execution likeconsulting, system analysis, engineering and construction of machinery as well on-site implementation and world-wide after sales support.
ADM-ISOBLOC GmbHAnlagen für Dosieren und MischenWeihersfeld 47
41379 Brüggen, Germany
Tel.: 02163 95 42 0
Fax: 02163 95 42 42
E-Mail: [email protected]
Web: www.admisobloc.de
Halle / Stand 6/D26
“A+D+M“Publicomm S.r.l.Via Domenico Cimarosa, 55r
17100 Savona, Italy
Tel.: +39 019 8384 11
Fax: +39 019 8384 141
E-Mail: [email protected]
Web: www.publicomm.it
Halle / Stand 6/C30 Media Pavilion
adhäsion KLEBEN&DICHTEN ist die einzige deutschsprachige Fachzeitschrift für dieindustrielle Kleb- und Dichttechnik. Sie spricht Hersteller und Anwender von Kleb- undDichtstoffen an und schafft branchenübergreifende Synergien. Der Leser erhält praxis-relevante Informationen zu den Themen Rohstoffe, Kleb- und Dichtstoffe, Geräte- undAnlagentechnik, Anwendungen sowie Forschung und Entwicklung. Die Zeitschrifterscheint 10x im Jahr.
“adhäsion KLEBEN & DICHTEN“Springer Fachmedien Wiesbaden GmbHAbraham-Lincoln-Str. 46
65189 Wiesbaden, Germany
Tel.: 0611 7878 0
Fax: 0611 7878 412
E-Mail: [email protected]
Web: www.adhaesion.com
Halle / Stand 4/A04, 6/C30 Media Pavilion
54
Adv - Afb
A
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitors
Plattform für Dialog und Technologietransfer rund um die Faser > join us in success AFBW - Ihr Netzwerk: Die AFBW unterstützt Sie mit einem Experten-Netzwerk. Pro-fitieren Sie von Synergiepotenzialen und Know-how-Transfer entlang der gesamtenWertschöpfungskette. AFBW - Ihr Nutzen: Die AFBW vernetzt Unternehmen, Universitäten, Hochschulen und Forschungseinrichtungen. Sie ist Treiber für Innovationen, zeigt neuartige Anwendun-gen auf und gibt Impulse für Werkstoff- und Produktinnovationen. AFBW - Ihr Zugang zu Entscheidungsträgern: Kontakt zu neuen Partner in der Wert-schöpfungskette - Information zu neuen textilen Ideen und Produkten - Verbund- undForschungsprojekte - Arbeitsgruppen, Workshops und Kongresse - Gemeinschaftsstän-de auf Messen - Kontakt zu anderen Netzwerken und Clustern - Lobbyarbeit für die Querschnittstechnologie
Die AFBW ist Ihr Kontakt für Innovation!
AFBWAllianz Faserbasierte WerkstoffeBaden-Wüttemberg e.V.Gerhard-Koch-Straße 2-4
73760 Ostfildern, Germany
Tel.: 0049 (0)711 32 73 25 13
Fax: 0049 (0)711 32 73 25 69
E-Mail: [email protected]
Web: www.afbw.eu
Halle / Stand 4/C02
Aerospace Manufacturing is a business-to-business publication that focuses on the design, production and supply chain elements of the civil and defence aerospace sectors. Published 10 times each year, the magazine provides sharply focused industry news and features on leading-edge technologies, along with pertinent comment from key aerospace organisations and industry figureheads.
As well as providing strategic promotional and marketing opportunities for companieswithin the aerospace manufacturing sector, Aerospace Manufacturing provides infor-med editorial content that serves as a regular source of important information for tho-se in the aerospace industry making important decisions relating to design, productionand the supply chain.
Distributed to around 10,500 decision-making industry professionals within Europe, each one of Aerospace Manufacturing’s targeted readers has been carefully selectedfrom an extensive database.
“Aerospace Manufacturing“MIT Publishing Ltd.Featherstone House 375, High Street
Rochester KEN ME1 1DA, United Kingdom
Tel.: +44 1634 830566
Fax: +44 1634 408488
E-Mail: [email protected]
Web: www.aero-mag.com
Halle / Stand 6/C30 Media Pavilion
It‘s the first website dedicated to industry and academia of composite materials inItaly, the site has the feature of this cross-sector approach: content is organized into a system of user-friendly but preserves the multiplicity of different points of view. Portalecompositi is indispensable for any entrepreneur who wants to have a complete and comprehensive view of the national landscape in this area, a meeting point bet-ween supply and demand, a unique place for your business. Information and innovation while, at your service. Portalecompositi contains a very big data base of companies based in Italy and also in Worldwide that operates in composi-tes market field. The website offer the possibility to create sponsorship for companies that want to enlarge its business through specific sponsorship packs. With a base of 350,00 you can start your sponsorship with Portalecompositi.it
Advanced Composites Solutions Srl
Via F.P. Tosti n. 11
64100 Teramo, Italy
Tel.: 01850670678
E-Mail: [email protected]
Web: www.portalecompositi.it
Halle / Stand 4/F31
55
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsAir - All
A
all ahead composites GmbHbike ahead compositesBenzstraße 5
97209 Veitshöchheim, Germany
Tel.: +49 931 991 27 007
Fax: +49 931 304 18 359
E-Mail: [email protected]
Web: www.all-ahead-composites.com
Halle / Stand 6/G04
Die Fachzeitung All about Sourcing berichtet über die Praxis und strategische Fragen entlang der Lieferkette. Im Fokus stehen Lieferanten, Logistik, Länder, neue Produkte, Geschäftsstrategien rund um Einkauf, Logistik, Materialwirtschaft. Sie finden u.a. exklusiv recherchierte Fachartikel, Reportagen, Einkaufsführer, Produkt- und Lieferan-ten-Übersichten und Messeführer.
Die Zeitung All about Sourcing berichtet über alles, was Sie wissen müssen, um up-to-date zu bleiben, und die Online-Magazine www.allaboutsourcing.de und www.allaboutsourcing.com bieten tagesaktuelle News, Studien & Praxis, Terminkalender und nützliche Informationen für die tägliche Arbeit. Außerdem können Sie sich über den Sourcing-Newsletter gebündelt unterrichten lassen. www.allaboutsourcing.de.
“All about Sourcing“Network Press Germany GmbHFriedberger Str. 154
86163 Augsburg, Germany
Tel.: +49 821 26 28 91-0
Fax: +49 821 26 28 91-29
E-Mail: [email protected]
Web: www.allaboutsourcing.de
Halle / Stand 6/C30 Media Pavilion
Akademische Fliegergruppe Stuttgart e.V.
Pfaffenwaldring 35
70569 Stuttgart, Germany
Tel.: 0049 711 685 62443
Fax: 0049 711 685 62496
E-Mail: [email protected]
Web: www.uni-stuttgart.de/akaflieg
Halle / Stand 4/B08
Airtech is the world leading manufacturer and supplier of vacuum bagging and compo-site tooling materials serving the composite, bonding and tooling industry. Airtechproduct range includes all materials required for the manufacture of composite tools and parts using the following vacuum bag techniques: wet lay-up, autoclave curing, resin infusion processes. Airtech supplies vacuum bagging films up to ultra-hightemperature and very large width, release films and liquids, pressure sensitive tapes, peel plies, breathers and bleeders, sealant tapes, connectors, hoses, rubber, toolingmaterials and resin infusion products. Please contact us for custom made products(slitting, perforations, custom made vacuum bags, custom kits, etc). Airtech products are used in the aeronautics, aerospace, marine, automotive, racing, wind energy and general composites industries. Airtech is an ISO 9001 and EN/AS 9100 registered company.
Airtech Europe Sarl
Z.I. Haneboesch
Differdange 4562, Luxembourg
Tel.: 00352 58 22 82 1
Fax: 00352 58 49 35
E-Mail: [email protected]
Web: www.airtech.lu
Halle / Stand 4/C21
56
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsAlt - Aoc
A
AOC is a leading global supplier of resins, gel coats, colorants and additives for com-posites and cast polymers. AOC products are manufactured in facilities strategically located in North America, Europe and Asia. Their complete product line of high performance resins are specified for their durability, strength, resistance to corrosion, light weight and other key characteristics.AOC’s success is derived from more than 50 years of innovative research technology, world-class manufacturing quality, and superior technical support and service. AOC products are used in all composite manufacturing markets:
equipment
AOC LLCInternational OfficeUnit 53, Factory Lane Brantham,
Manningtree ESS CO11 1NH, United Kingdom
Tel.: 0044 1206 390415
Fax: 0044 1206 390415
E-Mail: [email protected]
Web: www.aoc-resins.com
Halle / Stand 4/E36
As Partners of CEREX Advanced Fabrics Inc. we provide superior customer service and technical support throughout Europe.
CEREX Advanced Fabrics Inc. is the world leader in the production of high quality polyamide (nylon 6,6) spunbond nonwoven fabrics. Our N-Fusion(tm) brand surfacing veils and composite fabrics provide superior surface quality, excellent UV and corrosion resistance, improved impact resistance and deeper, richer colors than other nonwoenfabrics can produce. The N-Fusion(tm) fabrics are compatible with ester, polyurethane and epoxy resin systems and can be engineered to provide solutions that will makeyour products even better than today. We are committed to producing high quality products and our manufacturing and quality assurance systems are certified to ISO9001, ISO/TS 16949 and ISO 17025.
anowo ltd
Neubadstrasse 7
4015 Basel, Switzerland
Tel.: +41 61 282 82 20
Fax: +41 61 282 82 29
E-Mail: [email protected]
Web: www.anowo.com
Halle / Stand 4/F20
altropol Kunststoff GmbH
Rudolf-Diesel-Str. 9-13
23617 Stockelsdorf, Germany
Tel.: 0451 4 99 60 0
Fax: 0451 4 99 60 20
E-Mail: [email protected]
Web: www.altropol.de
Halle / Stand 4/B29
Altair verhilft seinen Kunden zu effizienter Entwicklung und beschleunigt Innovation; mit HyperWorks Simulationssoftware und Altair ProductDesign Beratung und Dienst-leistung rund um Berechnung und Simulation.Die OptiStruct Technologie ist die Grundlage für Altairs Concept Design Philosophie. So werden beanspruchungsgerechte Lösungen gefunden, die sich durch Effizienz und Lebensdauer auszeichnen. So lässt Altair branchenübergreifend aus Leichtbaupotentia-len Realität werden. Altair PD stellt Innovationskraft im Entwicklungsprozess bereit. Mit „OptimizationCenters“ bei führenden OEMs der Automobil- und Luftfahrtindustrie etabliert Altair ProductDesign den CAE getriebenen Entwicklungsprozess und verhilft dem Leichtbau auf den Weg. Altair ist privatgeführt und mit 1800 Mitarbeitern global vertreten. Mehr als 27 Jahre Erfahrung in der Entwicklung führender CAE Software, Grid Computing Technologienund im Produktdesign verschaffen Altairs Kunden entscheidende Wettbewerbsvorteile.
Altair Engineering GmbH
Calwer Straße 7
71034 Böblingen, Germany
Tel.: +49 7031 6208 0
Fax: +49 7031 6208 99
E-Mail: [email protected]
Web: www.altair.de
Halle / Stand 4/C02
57
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsAra - Asc
A
ASC Process Systems
1 Fleetsbridge Business Centre Upton Road
Poole BH 177AF, United Kingdom
Tel.: 0044 1202 662180
Fax: 0044 1202 662181
E-Mail: [email protected]
Web: www.aschome.com
Halle / Stand 6/B14
ARISTO® blickt auf eine 150 jährige innovative Tradition zurück und ist weltweit inüber 90 Ländern mit Verkauf und Servicestützpunkten vertreten. Mit mehr als 5.000 weltweit installierten ARISTOMATEN® gehört ARISTO® zu den füh-renden Herstellern von Flachbettschneidemaschinen. Die Entwicklung und Herstellungaller ARISTOMATEN®, findet ausschließlich im Hamburger Werk statt. Unser Portfolio umfasst CNC Schneideplotter mit einer Arbeitsbreite von 1,30 m bis 5,20 m, die Plotterlänge geht dabei je nach Maschinentyp modular bis 7,2 m. Die Highendplotter sind ausgestattet mit den verschiedensten Werkzeugköpfen zumSchneiden und Rillen sowie Fräsen und Winkelschneidwerkzeug, dem sogenanntenV-Schneider.Unser ARISTOMAT® integriert sich nahtlos in automatisierte oder bestehende Ferti-gungsprozesse und ist im Workflow mit den namenhaften Rip-Herstellern kompatibel. ARISTO® stellt sich den stetig wachsenden Anforderungen und Märkten mit innovati-ven und maßgeschneiderten Lösungen.
ARISTO Graphic Systeme GmbH & Co. KGSchnackenburgallee 117
22525 Hamburg, Germany
Tel.: 040 54747 0
Fax: 040 54747 111
E-Mail: [email protected]
Web: www.aristo.de
Halle / Stand 6/E08
Die Arcotec GmbH ist weltweit der einzige Hersteller von Corona-, Plasma- und Flam-manlagen für die Oberflächenvorbehandlung.
Nach mittlerweile über 35 Jahre Erfahrung auf dem Gebiet der Oberflächenvorbehand-lung ist und bleibt unser Firmenziel, dem Kunden die bestmögliche Lösung für seine
Anwendungsprobleme zu bieten.
Arcotec GmbH
Rotweg 24
71297 Mönsheim, Germany
Tel.: 0049 7044 9212 0
Fax: 0049 7044 9212 12
E-Mail: [email protected]
Web: www.arcotec.com
Halle / Stand 6/G29
Our company Aramicore Composite Co., Ltd located in Suzhou High-tech Zone, Jiangsu Province,China, the most powerful professional aramid paper honeycomb manufacturers, haspassed the French BV company ISO 9001:2008 and AS 9100C aviation level qualitysystem authentication. AC-series products quality has obtained several authoritative testing institutions approved. It can fully meet different needs of aramid paper honey-comb and composite materials products for aerospace and civil fields customers.
Our products_ AC-KH Para-aramid Honeycomb_ AC-NH-A Aerospace Grade Meta-aramid Honeycomb_ AC-NH Commercial Grade Meta-aramid Honeycomb _ AC-AHM Absorbent Honeycomb Material _ AC-FH Foam Honeycomb_ AC-HCP Honeycomb Composite Panel_ AC-AH Aluminum Honeycomb
Aramicore Composite Co., LTD.
No. 26 Qinghua Rd, Suzhou High-tech Zone
Suzhou JNGS 215151, China
Tel.: +86-(0)512-65399309
Fax: +86-(0)512-65396229
E-Mail: [email protected]
Web: www.aramicore.com
Halle / Stand 6/B36g
58
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsAsp - Ato
A
Atom ist führender Spezialist für die Herstellung von Stanz- und Schneidesystemenmit über 250.000 weltweit installierten Maschinen. Zu unserem Lieferprogramm gehö-ren: Oszillierende Messerschneidesysteme, Schwenkarmstanzmaschinen, Karrenbalken- und Brückenstanzmaschinen, Rotationsstanzmaschinen, Exzenterstanzmaschinen, eine Vielzahl von Peripheriegeräten, die zum Ablängen und Einschneiden geeignet sind.
Atom Stanz- und Schneidesysteme GmbH
Im Tälchen 12a
66976 Rodalben, Germany
Tel.: 06331 8007 0
Fax: 06331 8007 28
E-Mail: [email protected]
Web: www.atom-germany.com
Halle / Stand 6/A08
Founded in 2005, Assocompositi is the Italian Industry Association for Composite Materials. Its mission is to promote knowledge and use of composite materials in Italyin every possible industrial application and to activate synergies and promote actions at the international level.
AssocompositiItalian Industry Composites Associationc/o Politecnico di Milano Dip.CMIC Pizza da Vinci 32
20133 Milano, Italy
Tel.: +39 3480105920
Fax: +39 02 70638173
E-Mail: [email protected]
Web: www.assocompositi.it
Halle / Stand 6/C02
Als Technologieführer für Greiferteile, Roboterhände und Automationsanlagen ist dieASS Maschinenbau GmbH weltweit tätig. Rund 100 Mitarbeiter in Overath und Partner weltweit entwickeln seit 30 Jahren intelligente Lösungen für die unterschiedlichstenAufgabenstellungen aus den Bereichen Automation und Robotik. ASS automatisiert komplexe Arbeitsabläufe in der kunststoffverarbeitenden Industrie wie Greifen, Einlegen und Entnehmen sowie Montage und Qualitätsprüfung bei der Fertigung von Kunststoffartikeln. Der ASS Roboterhandbaukasten umfasst über 1.500Standardgreiferteile. Alle ASS Komponenten werden am eigenen Standort entwickelt, konstruiert, produziert und mit höchstem Qualitätsstandard nach EG-Maschinenrichtlinie ausgeliefert. Alle betroffenen Elemente verfügen über eine Einbauerklärung, beziehungsweise über eine Konformitätserklärung. Zudem ist das Qualitätsmanagement des Unternehmens nachDIN EN ISO 9001:2008 zertifiziert.
ASS Maschinenbau GmbH
Klef 2
51491 Overath, Germany
Tel.: +49 2206 90547-0
Fax: +49 2206 90547-91
E-Mail: [email protected]
Web: www.ass-automation.com
Halle / Stand 6/G06
ASP Plastics GmbH is the exclusive distributor of PolyOne DSS sheet and film products in Europe. Our highlight is PolyOne‘s 3D-thermoformable Royalex® sheet. Royalex® is an ABSlaminate with a core of expanded, closed-cell foam. This tough, lightweight sheet is created by laminating core, substrate and surface plies into a single monolithic unit. Furthermore PolyOne‘s famous Royalite® Sheet is an engineered thermoplastic alloydesigned for thermoformable applications which have the most stringent flame andsmoke requirements. Last but not least, PolyOne‘s Envirotuf® 22 sheet is a composite sheet utilizing short-strand fiberglass for reinforcement, which adds a high level of stiffness and heat deflection temperature to a polyolefin base resin. Envirotuf® 22 can be easily thermo-formed and is suited for under-the-hood applications. Other key features of Envirotuf® 22 include very low CLTE, good impact strength and excellent chemical resistance.
ASP Plastics GmbH
Ihlendiek 13
22145 Braak, Germany
Tel.: +49 4321 5555 952
Fax: +49 4321 5555 953
E-Mail: [email protected]
Web: www.asp-plastics.com
Halle / Stand 6/F15
59
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsAut - Aut
A
AutomobilKONSTRUKTIONFachwissen für Entwicklungsingenieure und Konstrukteure in der Automobil- undZulieferindustrie
AutomobilKONSTRUKTION ist eine Fachzeitschrift der Konradin Mediengruppe, einem der größten Anbieter von Fachinformationen im deutschsprachigen Raum.
Entwicklungsingenieure und Konstrukteure im Bereich Forschung & Entwicklung der Automobilindustrie und deren Zulieferer finden hier wertvolle Informationen überalles, was im Automobil „verbaut“ ist – vom ersten „Pinselstrich“ bis zur letzten Er-probung vor dem Serienstart. Theoretische Problemlösungen, praktische Anwendungen sowie zahlreiche Produktinnovationen informieren und inspirieren Entwicklungsingeni-eure und Konstrukteure und bieten wichtige Entscheidungshilfen bei der Auswahl von Komponenten.
Ergänzt wird das Informationsangebot mit dem monatlich erscheinenden Newsletter „Automotive News“ und laufend aktuelle Meldungen auf www.autokon.de
“AutomobilKONSTRUKTION“Konradin Verlag R. Kohlhammer GmbHErnst-Mey-Str. 8
70771 Leinfelden/Echterdingen, Germany
Tel.: +49 711 7594-436
Fax: +49 711 7594-1436
E-Mail: [email protected]
Web: www.autokon.de
Halle / Stand 6/C30 Media Pavilion
Die AUTOMATICA ist die führende europäische Innovationsplattform für alle automa-tisierten Prozesse. Der produzierenden Industrie bietet sich hier das weltweit größteAngebot an Robotik, Montageanlagen und industriellen Bildverarbeitungssystemen.
Unternehmen aus allen Industriebranchen finden hier zukunftsweisende Lösungen, umqualitativ bessere Produkte noch effizienter herstellen zu können. Damit ist die AU-TOMATICA der Pflichttermin für Entscheider und Produktionsverantwortliche aus allen Branchen der produzierenden Industrie.
Sie ist die Messe, um sich über die neuesten Entwicklungen zu informieren, Lösungen für neue Herausforderungen zu finden, Kontakte zu knüpfen und effektiv in Technolo-gien der Zukunft zu investieren. Hier stehen seit 2010 auch automatisierte Lösungen für die industrielle Fertigung von Composite- und Leichtbaukomponenten im Mittel-punkt.
Die AUTOMATICA 2014 findet vom 3. - 6. Juni 2014 parallel zur MAINTAIN und Inter-solar Europe in Munchen statt.
AUTOMATICA - 6. Internationale Fach-messe für Automation und Mechatronik Messe München GmbHMessegelände
81823 München, Germany
Tel.: +49 89 949-11538
Fax: +49 89 949-11539
E-Mail: [email protected]
Web: www.automatica-munich.com
Halle / Stand 6/G45
Der WIN-Verlag (www.win-verlag.de) steht für eine pragmatische und nutzenorientier-te Berichterstattung mit dem Anspruch, dem Leser tatsächlich weiterzuhelfen, indem er durch seine Verlagsangebote die Zusammenhänge und die Tragweite technikbegrün-deter Entscheidungen verständlich vermittelt.
Im WIN-Verlag erscheinen die Publikationen e-commerce magazin (www.e-com-merce-magazin.de), digitalbusiness (www.digital-business-magazin.de), AUTOCADMagazin (www.autocad-magazin.de), Inventor Magazin (www.inventor-magazin.de), DIGITAL ENGINEERING Magazin (www.digital-engineering-magazin.de), DIGITAL MANUFACTURING Magazin (www.digital-manufacturing-magazin.de) und VIRTUAL REALITY Magazin (www.virtual-reality-magazin.de) sowie mehrere Business PartnerKataloge. Der Verlag spricht mit seinen B2B-Publikationen die Zielgruppen Architekten, Konstrukteure, Organisatoren, Berater, IT-Spezialisten, Vorständen, Geschäftsführer und weitere Entscheidungsträger an.
“AUTOCAD & Inventor Magazin“WIN-Verlag GmbH & Co.KGJohann-Sebastian-Bach-Str. 5
85591 Vaterstetten, Germany
Tel.: 0049 08106 350-0
Fax: 0049 08106 350-190
E-Mail: [email protected]
Web: www.win-verlag.de
Halle / Stand 6/C30 Media Pavilion
AUTEFA Solutions liefert turn- key Anlagen sowie Einzelmaschinen für die Nonwo-ven-Herstellung. Anwendungsgebiete sind die Herstellung von Kunstleder, Filterpro-dukten, Papiermaschinenfilzen bis hin zu im Automobilbereich eingesetzten Filzen, Geotextilien, Bodenabdeckungen, Isolierfilzen und Nonwovens für die Hygienebranche. Die Maschinen von AUTEFA Solutions eignen sich auch für die Produktion von glas- oder kohlefaserverstärkten Kunststoffen. Diese Nonwovens werden im Automobil- und Schiffsbau, in der Luftfahrtbranche und beim Bau von Windenergieanlagen eingesetzt.
AUTEFA Solutions- our technologies for your success
AUTEFA SOLUTIONS GERMANY GMBH
Paul-Lenz-Str. 1
86316 Friedberg, Germany
Tel.: +49 821 2608 0
Fax: +49 821 2608 299
E-Mail: [email protected]
Web: www.autefa.de
Halle / Stand 4/F11
60
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsAut - Axs
AXSON TECHNOLOGIES mit Hauptsitz in Frankreich und Mitglied der Axson Group, ent-wickelt, produziert und vertreibt Kunstharze (Polyurethane, Epoxide und Silikone). Seit 75 Jahren entwickeln wir innovative Produkte für Anwendungen in der Automobil-, Boots-, Windkraft-, Luft- und Raumfahrtindustrie und vielen weiteren Anwendungs-gebieten. Bereits im Vorfeld passen wir unsere neuen Produktentwicklungen dabei denfortschrittlichen technologischen Projekten unserer Kunden an. Auf dem Composites-Sektor bieten wir eine umfassende Auswahl an extrudierbaren Pasten, Blockmaterial, Laminierharzen, Gelcoats, Konstruktionsklebstoffen, Trennmit-teln und Hilfsstoffen sowie Materialien unserer Partner Amber Composites und Diatex.Damit bedienen wir konsequent die neuen Technologien der Leichtformbauweise. Als global tätige Gruppe bieten wir unseren Kunden direkt vor Ort technischen Support für vielfältige Anwendungen. Wir sind ISO 9001 und ISO 14001 zertifiziert.
AXSON TechnologiesAxson GmbHWaldstr. 72
63128 Dietzenbach, Germany
Tel.: +49 6074 40711 0
Fax: +49 6074 40711 77
E-Mail: [email protected]
Web: www.axson.com
Halle / Stand 4/B22
avr - Allgemeiner Vliesstoff-Report dient Herstellern, Veredlern und Verwendern vonVliesstoffen, technischen Textilien und Geotextilien zur Orientierung über die inter-nationale Entwicklung im Vliesstoffbereich. avr ist ein wertvolles Bindeglied zwischenProduzenten und Abnehmern. Die Unternehmens- und Wirtschaftspolitik der Branchespiegelt sich in den Rubriken „Länder-Fokus, Special, Technologie & Maschinen, For-schung & Entwicklung, Messen/Events“ wider. avr informiert seine Leser über neue Entwicklungen auf den Gebieten Vliesstoffer-zeugung und -verarbeitung, Vliesstoffveredelung, der Rohstoffe und Hilfsmittel, der technischen Textilien, Maschinen und Geräte.
“AVR Allgemeiner Vliesstoff-Report“dpw-Verlagsgesellschaft mbHBorsigstr. 1-3
63150 Heusenstamm, Germany
Tel.: 0049 6104606 0
Fax: 0049 6104606 444
E-Mail: [email protected]
Web: www.kepplermediengruppe.de
Halle / Stand 6/C30 Media Pavilion
Die AVK – Industrievereinigung Verstärkte Kunststoffe ist die einzige Interessensge-meinschaft der Kunststoffindustrie, die als Fachverband für Faserverbundkunststoffe/Composites die Interessen der Erzeuger und Verarbeiter von faserverstärkten Kunst-stoffen/Composites auf nationaler und europäischer Ebene vertritt.
Das Dienstleistungsspektrum umfasst unter anderem Seminare und Tagungen, Fach-arbeitskreise, die Schaffung einer Networking-Plattform und die Bereitstellung vonInformationen (www.avk-tv.de).
National ist die AVK einer der vier Trägerverbände des GKV – Gesamtverband Kunst-stoffverarbeitende Industrie und international Mitglied im europäischen Composi-tes-Dachverband EuCIA - European Composites Industry Association.
AVK - Industrievereinigung VerstärkteKunststoffe e.V.Am Hauptbahnhof 10
60329 Frankfurt am Main, Germany
Tel.: 069 27 10 77 0
Fax: 069 27 10 77 10
E-Mail: [email protected]
Web: www.avk-tv.de
Halle / Stand 4/C41, 4/D40, 4/D41
Das Fachmedienhaus ist einer der führenden deutschen Fachinformationsanbietermit rund 100 Fachzeitschriften und 60 Webseiten sowie zahlreichen internationalen Aktivitäten. Hauptsitz ist Würzburg. Die Print- und Online-Medien bedienen vor allem die Branchen Industrie, Automobil, Informationstechnologie und Recht/Wirtschaft/Steuern. Sie bieten Werbetreibenden maßgeschneiderte Kommunikationslösungen von Reichweite über Imageaufbau bis hin zur Generierung von Leads. Mehrmedial via Print, Digital, Events und Services.
“Automobil Industrie“Vogel Business Media GmbH & Co. KGMax-Planck-Str. 7/9
97082 Würzburg, Germany
Tel.: +49 931 418 0
Fax: +49 931 418 2100
E-Mail: [email protected]
Web: www.vogel-medien.de
Halle / Stand 6/C30 Media Pavilion
A
61
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsBar - Bau
B
Hersteller von gewebten Bändern, gewebten UD-Schläuchen und 3 dimensionalen Pre-forms für die Kunststoffverstärkung. Weitere Spezialitäten sind spiral gewebte Bänder mit einem Innendurchmesser von ca. 50mm und mehr. Unsere Qualitäten können aus Carbon, Glas, Hybriden und allen weiteren modernen Hochleistungsgarnen bis zu einer Breite von ca. 350mm produziert werden.
Manufacturer of woven tapes, woven UD tubulars and woven 3 dimensional preformed shapes for reinforcement. Other specialties are spiral woven tapes with an inside diameter of app. 50mm or more. All qualities can be made out of carbon, glass, hybridsand all other modern yarns up to a width of app. 350mm
J.H. vom Baur Sohn GmbH & Co. KG
Marktstr. 34
42369 Wuppertal (Ronsdorf), Germany
Tel.: 0202 24661 0
Fax: 0202 4660033
E-Mail: [email protected]
Web: www.vombaur.de
Halle / Stand 6/C36
BASF for wind energy and automotive components BASF supports the development of wind power as a climate-friendly source of energy in the energy mix. BASF’s portfolio for wind power applications comprises epoxy andcoating systems, foams, special grouting mortars, concrete additives and lubricants.These innovative solutions facilitate more efficient manufacturing, coating andmaintenance of rotor blades, foundations, towers and gearboxes of wind turbines. Thus, BASF helps to make wind turbines more profitable and durable. BASF continuallydevelops its wind power portfolio together with its customers. BASF is also working on solutions for automotive components based on continuous fiber reinforcement. This covers polyamides for locally reinforced parts. Also, a new cross-divisional team develops products based on three polymer matrices epoxy, po-lyurethane and polyamide to be used in fast resin transfer molding (RTM) processes in combination with continuous fiber fabrics.
BASF SE
Carl-Bosch-Str. 38
67056 Ludwigshafen, Germany
Tel.: 0049 621 60 49273
Fax: 0049 621 60 49497
E-Mail: [email protected]
Web: www.plasticportal.eu, www.polyurethanes.basf.com,
www.windenergy.basf.com
Halle / Stand 4/B26
BASALTEX NV, a Belgian based company, is the pioneer introducing the basalt fiberto the European market and has built up a broad knowledge on the production andthe use of basalt fiber based products. BASALTEX offers high quality basalt roving,basalt chopped & milled fibers, heat insulating needle felts, fire blocking fabrics andtapes, dry woven and non crimp fabrics with the right stability and impregnation properties for all types of composites applications. We also work closely together with our customers to develop custom made basalt fibers based solutions for the technical textiles and composite sector. Available sizings on the basalt fibers are mainly designed for thermoset resins. BASAL-TEX is carrying out an intensive development program to offer a suitable basalt fiber to the thermoplastic industry. In first stage the focus is on long fiber reinforcement for PP and PA. Come and discover the basalt fiber suitable for thermoplasts.
BASALTEX NV
Zuidstraat 18
8560 Wevelgem, Belgium
Tel.: 0032 56 43 00 92
Fax: 0032 56 42 42 34
E-Mail: [email protected]
Web: www.basaltex.com
Halle / Stand 4/D01
Seit dem 19. Jahrhundert flechtet Barthels-Feldhoff Kordeln, Schläuche und Bänder für eine Vielzahl technischer Anwendungen.Unsere Produktübersicht:
Geflochtene Schnüre und Bänder von 0,1 mm bis 10 mm Durchmesser - Geflochtene Schläuche bis 300 mm Durchmesser - Geflochtene Bänder bis 600 mm Breite - Robo-tergestützte KernumflechtungEine Vielzahl an Materialien: Auf unseren Maschinen verarbeiten wir Multifilamentewie Aramid, Carbon, UHMW-Polyethylen, Glas, PPS, PEEK, Silicatfasern, Polyester HT, Polyamid, Polypropylen, Stahl, Naturfasern und viele andere. Our product range:
Braided cords and laces from 0,1 mm up to 10 mm diameter - Braided tubes up to 300mm diameter - Braided tapes up to 600 mm width - Robot-assisted overbraiding Plenty of materials: On our machines we manufacture multifilaments like aramide,
carbon, UHMW-polyethylen, glass, PPS, PEEK, silicat fibres, polyester HT, polyamide, polypropylene, steel, natural yarns and many more.
Barthels-Feldhoff GmbH & Co. KG
Brändströmstr. 9-11
42289 Wuppertal, Germany
Tel.: 0202 647950
Fax: 0202 661972
E-Mail: [email protected]
Web: www.barthels-feldhoff.de
Halle / Stand 6/C36
62
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsBco - Ber
B
Bercella is a leading name in Italian composites market. Our advanced production covers the entire chain of activities, from components design and construction of tem-plates and moulds to lamination, autoclave curing, trimming, machining and testing . Our 5 autoclaves, 5 CNCs, filament winding and compression moulding plant are onlya small part of the key features of the new production plant built in 2009. The design/engineering activity involves CAD-CAM design, FEM and CFD simulations, EM and Environmental tests in order to offer our customer a full package of product develop-ment. The need for a continuous improvement led Bercella to the implementation of a state-of-the-art material testing laboratory, and NDT technologies such as ultrasoundand thermal scans. Bercella is ISO9001:2008 certified as well as being certificated by some of the biggest aerospace companies in the world (Agusta Westland, Aermacchi, IAI, etc.); Bercella is certified EN9100.
Bercella s.r.l
via Enzo Ferrari, 10
43040 Varano deí Melegari, Italy
Tel.: +39 0525 53680
Fax: +39 0525 550407
E-Mail: [email protected]
Web: www.bercella.it
Halle / Stand 6/G38
Belotti S.p.A. has been manufacturing milling and water-jet 3-axis and 5-axis CNCmachining centers for over 30 years. Expertise combined with a youthful enthusiasmfor the research of new technologies and advanced solutions is the mainstay of our company‘s success and growth. Since our first equipment was manufactured in 1977, we continued to produce machining centres that are greatly appreciated by our custo-mers worldwide. Providing automotive, aerospace and composites industries with smart and costeffec-tivesolutions: for applications on advanced materials such as carbon, kevlar and light alloys, special systems have been designed to achieve the best accuracy and machining reliability. The major operators in the aeronautical field have chosen our machining centres for milling light alloys, sandwich panels and composites. The outstanding performance and the wide range of machining centres enable to satisfy every customer’s request.
BELOTTI SPA
Via San Giovanni Bosco 12
24040 Suisio, Italy
Tel.: 00390354934411
Fax: 0039035902742
E-Mail: [email protected]
Web: www.belotti.com
Halle / Stand 6/E32
Beinlich Pumpen GmbH
Gewerbestraße 29
58285 Gevelsberg, Germany
Tel.: +49 2332 5586 0
Fax: +49 2332 5586 31
E-Mail: [email protected]
Web: www.beinlich-pumps.com
Halle / Stand 6/B12
Bcomp Ltd.
Passage du Cardinal 1
1700 Fribourg, Switzerland
Tel.: 0265588402
Fax: 0264254501
E-Mail: [email protected]
Web: www.bcomp.ch
Halle / Stand 4/D05
63
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsBij - Bre
B
Brebeck Composite s.r.o. ist ein Hersteller von Faserverstärkten Kunststoffen in Prepreg/ Autoklav Technologie, sowie im Infusionsverfahren und Hand / Nass laminieren. Produktionsstandort ist die Tschechische Republik. Als Produktionsfläche stehen 1000m_ zur Verfügung.Mitarbeiterzahl : 21Geschäftsführung und Produktionsleitung ist unter Deutscher Verantwortung.
BREBECK Composite s.r.o.
Zelazného 256/1
Ostrava Muglinov 71200, Czech Republic
Tel.: +420 7250 55991
Fax: +420 5966 12173
E-Mail: [email protected]
Web: www.brebeckcomposite.com
Halle / Stand 6/F25
Die brainLight GmbH entwickelt und vertreibt audio-visuelle Entspannungssysteme mit automatisierter Massagesessel-Steuerung und ist auf diesem Gebiet Marktführer.Das inhabergeführte Unternehmen befasst sich seit 1988 mit den Themen Entspannung, Stressreduzierung und mentales Training. Als Baustein im Betrieblichen Gesundheits-management unterstützt brainLight Mitarbeiter in Unternehmen zur Motivations- undLeistungssteigerung, mentalen und körperlichen Entspannung und zur Gesundheitsför-derung.
brainLight GmbH is the market leader to develop and distribute audio-visual relaxation systems that automatically control a massage chair. The company from Goldbach/Ger-many is run by the owners and has been dealing with topics such as relaxation, stress release and mental training since 1988. Visitors and exhibitors are invited to the „brainLight Wellness Lounge“ to experience a deep relaxation session on Shiatsu-Massage Chairs coupled with an audio-visual programme.
brainLight GmbH
Hauptstr. 52
63773 Goldbach, Germany
Tel.: 06021 59070
Fax: 06021 540997
E-Mail: [email protected]
Web: www.brainlight.de
Halle / Stand 6/A14
Braca-Sport company (founded in 1991) specialises in producing UD carbon fabrics we call ‚UniDry‘ for hand lamination, and UD prepreg, called „UniPreg‘. Our company star-ted to produce UD fabrics in 1999. Our proprietary spreading technology allows us toproduce at least 50 gr/m2 UD fabrics or prepreg from 50K yarns, therefore our prices are very competitive in the category of low area weight UD carbon materials. We supply our materials to a wide range of industries, such as construction reinforcement, sporting equipment and car manufacturers.
Braca-Sport LTD
Tikos pr. 159/A
Kaunas LT_52102, Lithuania
Tel.: 00370 37 474 033
Fax: 00370 37 474 035
E-Mail: [email protected]
Web: www.unicarbon.com
Halle / Stand 4/F02
BIJL Profielen ist ein Unternehmen mit langjähriger Erfahrung in der Herstellung von Kompositprofilen.
BIJL Profielen ist der führende Hersteller von Kompositprofilen in den Niederlanden. Wir haben uns in mehr als dreißig Jahren zum renommierten Produzenten von glas-faserverstärkten Polyesterprofilen und hochwertigen Kompositkonstruktionen ausge-wachsen. Die Niederlande sind unserer Inlandsmarkt, aber von unserem Sitz in Heijnin-gen aus bedienen wir Kunden in ganz Europa. Die von uns hergestellten Profile findenAnwendung in verschiedensten Marktsegmenten, wie Konstruktion, Logistik, Sport und Freizeit, Infrastruktur, Elektronik, Klima & Lüftung, Industrieanwendungen, Sicherheit usw. Eine gesunde Streuung und eine äußerst stabile Kundschaft sorgen dafür, dass wirjedes Jahr ein autonomes Wachstum zu realisieren wissen. Unser Ziel? Gemeinsam mitunseren Kunden wollen wir innovative und wirtschaftliche Lösungen unter Einbringung von Erfahrung und Technologie auf höchster Ebene schaffen.
BIJL Profielen BV
Markweg Zuid 34
4794 SN Heijningen, The Netherlands
Tel.: 0031 1675 21 717
Fax: 0031 1675 21 818
E-Mail: [email protected]
Web: www.bijlprofielen.nl
Halle / Stand 4/A32
64
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsBre - Bus
B
Die Busse Heizplattentechnik produziert nahezu allen gewünschten Größen und Aus-führungen Heiz- und Kühlplatten nach Kundenanforderungen. Die Bandbreite reicht von Kleinstplatten bis zu großformatigen Heizplattensystemen.
Einsatz finden die elektrisch oder durch Flüssigmedien beheizten Platten in nahezu allen industriellen Bereichen. Z.B. in der Kunststoffverarbeitung, in der Automobilindu-strie, im Flugzeugbau, in der PUR-Verarbeitung oder in der Fertigung von Halbleitern und in Trockenöfen. Als Markt führender OEM-Hersteller operiert die Busse Heizplat-tentechnik GmbH in der Holz verarbeitenden Industrie und auf dem PV-Markt. Das Produktportfolio wird durch einen Werkzeugbau ergänzt.
Der Maschinenpark der Busse Heizplattentechnik GmbH ist für die Fertigung von groß-formatigen Produkten optimiert. Aluminiumkonstruktionen werden mittels Schweiß-und Klebetechnik individuell gefertigt.
Busse Heizplattentechnik GmbH
Postfach 1107
32325 Espelkamp, Germany
Tel.: 05772 9775 40
Fax: 05772 9775 55
E-Mail: [email protected]
Web: www.busse.cc
Halle / Stand 6/C42
BÜFA Composites ist ein Systemanbieter mit innovativen, maßgeschneidertenProdukten, herausragendem technischen Service, Komplettlösungen, Maschinen- und Applikations Know-how. Zur Herstellung von Teilen aus GFK, aber auch für unverstärkte Anwendungen, benötigen Verarbeiter von Reaktionsharzen kundenorientierte und innovative Lieferanten. Das umfangreiche Technologieangebot von BÜFA Composites bedeutet Wissensvor-sprung für die Hersteller aus den Branchen Automobil, Schienenfahrzeuge, Windener-gie, Bauwesen, Sanitär, Tanks und Rohre, Bootsbau und Schwimmbäder. Ideal ergänzt werden unsere Produkte durch das Angebot der BÜFA Tec, die ebenso ausgereifte, anwendungsfreundliche wie individuelle Anlagentechnik und System-lösungen bietet. Ungesättigte Polyesterharze, Gelcoats, Klebeharze, Farbpasten, Reaktionsmittel,Trennmittel, Hilfsstoffe und Additive, Verstärkungs-, Kern- und Vliesmaterialien,Brandschutzsysteme, Formenbausysteme, BÜFA Tec – Maschinentechnologie
BÜFA Composites GmbH & Co KG
Stubbenweg 38
26125 Oldenburg, Germany
Tel.: +49 (0) 441 885384 10
Fax: +49 (0) 441 885384 29
E-Mail: [email protected]
Web: www.buefacompositesystems.de
Halle / Stand 4/D38, 4/PDA_F
BST ProControl ist Spezialist für die Messung und Qualitätssicherung flachbahniger Materialien. Das Geschäftsfeld umfasst die Planung, Produktion, Implementierung sowie Modernisierung von Komponenten zum Messen, Steuern und Regeln (MSR). Dabei steht die Qualitätskontrolle mittels berührungsloser und nicht radiometrischer Messlösungen im Fokus. Anwendungsgerecht abgestimmte Sensoren, kombiniert mit einem ausgeklügeltenAutomatisierungs- und Visualisierungssystem sorgen für präzise Registrierungen sowieeine lückenlose Überwachung mittels Dicken-, Flächengewichts-, Schichtdicken- undFeuchtigkeitsmessung. Zum Einsatz kommen diese bei band- und plattenförmigen Materialien, wie sie im Zuge der Fertigung von Kunststoff- und Metallfolien, Papieren, Textilien, Schaumstoffen, Bodenbelägen, Vlies, Metallbändern sowie Halbzeugen derAutomobilzulieferindustrie verlangt werden. Die Systeme sorgen dafür, dass die Eigenschaften dieser Materialien präzise erfasst, überwacht und ausgewertet werden.
BST ProControl GmbH
Ringstr. 11
56579 Rengsdorf, Germany
Tel.: +49 2634 94372 0
Fax: +49 2634 94372 299
E-Mail: [email protected]
Web: www.bst-procontrol.de
Halle / Stand 4/F11
Das Unternehmen BREYER wurde 1949 von Anton Breyer gegründet. Schon nach weni-gen Jahren erfolgte der Einstieg in die Extrusionstechnik. Die heutige Struktur gliedert sich in vier Geschäftsbereiche: Plattenanlagen, Folienanlagen, Tubenanlagen sowie Folien - und Plattendüsen.
Das Produktionsprogramm beinhaltet den Bau von Extrusionsanlagen für die Produkti-on von Platten, Flachfolien und Tubenschläuchen aus thermoplastischen Kunststoffensowie Pressen für Composite Produkte (Spaltimprägnierverfahren).
Die Anlagen werden in vielfältigen Variationen angeboten mit Ausstoßleistungen bis2000 kg / h sowie Platten- bzw. Folienbreiten bis 3000 mm. Tubenanlagen werden für Schlauchdurchmesser von 13 mm bis 60 mm gebaut. Das BREYER Innovationscenter beinhaltet mehrere Folien-und Plattenanlagen im Produktionsmaßstab sowie eineKalanderanlage für Lithium-Ionen Folienherstellung.
BREYER GmbH Maschinenfabrik
Bohlinger Str. 27
78224 Singen, Germany
Tel.: +49 7731 9 20-0
Fax: +49 7731 9 20-190
E-Mail: [email protected]
Web: www.breyer-extr.com
Halle / Stand 4/D36
65
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsBut - Can
C
Bereits in den frühen 60er Jahren begann Cannon als eines der ersten Unternehmenweltweit mit der Entwicklung von Niederdruck- und Hochdruckmaschinen zur Verar-beitung von Polyurethan-Systemen. In der fast 50 jährigen Unternehmensgeschichtehat sich Cannon zum international führenden Hersteller von Polyurethanmaschinen und -anlagen entwickelt. 2013 stellt die CANNON Gruppe ihre neuesten Entwicklungen auf der COMPOSITES EUROPE vor. Ein internationales Team von Verbundwerkstoff-Spezialisten präsentiert inHalle 6 auf dem Stand A 24 nicht nur Neuerungen, sondern informiert auch über das weltweit aufgestellte Netz an CANNON Niederlassungen und Service-Centern.
CANNON DEUTSCHLAND GMBH
Moselstr. 27
63452 Hanau, Germany
Tel.: 0049 6181 90037 0
Fax: 0049 6181 90037 99
E-Mail: [email protected]
Web: www.cannon-deutschland.de
Halle / Stand 6/A24
Cam Elyaf is a subsidiary company of SISECAM GROUP and is a manufacturer of „E“ glass fiber for GRP manufacturing.Since production has started in 1976,Cam Elyaf has continually increased its capacity and grown to one of the valuable Europeanglass fiber manufacturers.With the product range of Glass Fiber(Chopped Strand Mat, Multi End Roving, Single End Roving, Chopped Strands, Noven Roving, Combinations.Cam Elyaf serves to sectors/productions of Aeronautics, automotive, building,marine, yachting,pipes,tanks,wind energy, consumer goods etc.Through application research the performance and properties of the glass fiber products are tested and evaluated in order to guarantee quality, efficient application on optimal price / performance relationship and the required properties for end-products.Cam Elyaf sells its productsdirectly to customers as well as indirectly through distributors.
CAM ELYAF SAN. A.S. SISECAME-5 Karayolu, Bayramoglu Sapagi Çayirova - Gebze
Kocaeli 41420, Turkey
Tel.: 0090 262 6781717
Fax: 0090 262 6781595
E-Mail: [email protected]
Web: www.sisecam.com
Halle / Stand 6/D22
CADFEM – weil CAE-Simulation mehr ist als Software
1985 gegründet, zählt CADFEM zu den Pionieren der numerischen Simulation auf Basis der Finite-Elemente-Methode (FEM). Mit 12 Standorten, über 170 Mitarbeitern und mehr als 130 Berechnungsingenieuren ist CADFEM einer der größten europäischen Anbieter für Computer-aided Engineering (CAE). Wir arbeiten eng mit der ANSYS, Inc.in Pittsburgh (Pennsylvania) zusammen und sind ANSYS Competence Center FEM inZentraleuropa. Weil CAE-Simulation mehr als Software ist, liefert CADFEM alles, wasüber den Simulationserfolg entscheidet, aus einer Hand. Führende Software und IT-Lö-sungen. Beratung, Schulung, Engineering. Know-how auf dem neuesten Stand.
Antworten auf Fragen rund um die Simulationslösung ANSYS Composite PrepPost und
ANSYS Workbench erhalten Sie bei CADFEM auf der Composites Europe.
CADFEM GmbH
Marktplatz 2
85567 Grafing, Germany
Tel.: 08092 7005-0
Fax: 08092 7005-77
E-Mail: [email protected]
Web: www.cadfem.de
Halle / Stand 6/D40
Butzer Engineering Systems GmbH entwickelt und produziert multifunktionale lineare CNC Bearbeitungssysteme zur Anwendung in allen verarbeitenden Industrien. DieSchwerpunkte liegen in Geometrie und Formgebung. Besondere Kompetenzen sind das Fräsen-Schneiden (Ultraschall-Messer, Wasser-Plasma-Laser) von Aluminium-Composi-te-Materialien und Stahl-Holzwerkstoffen.
Butzer Engineering Systems GmbH
Im Felde 1
31711 Bad Eilsen, Germany
Tel.: 05722-286 9998
Fax: 05722-286 9999
E-Mail: [email protected]
Web: www.besystems-germany.eu
Halle / Stand 6/E36
66
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsCan - Car
C
Carbon Composites e.V.
Alter Postweg 101
86159 Augsburg, Germany
Tel.: 0821 80162322
Fax: 0821 3162342
E-Mail: [email protected]
Web: www.carbon-composites.eu
Halle / Stand 4/B04
CARBOMID is the brandname for Carbon, Aramid and Hybrid woven composite fabricsof Birlik Ticaret Turk AS established in 1944.
CARBOMID entered the market with the state of the art looms in 2012 and is able to meet all your needs in composite fabrics at high quality standards.
Our reputation and reliable relations with local and international fiber suppliers enableus to fulfill all customers specifications in our facility with an annual productioncapacity of 60 MT.
CARBOMID - BIRLIK TICARET TURK AS
MEYDAN SOK.NO.1, KAT.14 MASLAK
ISTANBUL 34398, Turkey
Tel.: +90 212 290 2770
Fax: +90 212 290 2775
E-Mail: [email protected]
Web: www.carbomid.com.tr
Halle / Stand 4/F26
Modellbau, Prototypenbau, Fahrzeugteile Kleinserie in Carbon Leichtbau für Motorsport.
Carbonveredelung, Designwaschbecken, R 1-4 Milky Rooms Sitzmöbel in CarbonCarbolight GbR
Carl-Zeiss-Str. 11
71229 Leonberg, Germany
Tel.: 07152/908 22 07
Fax: 07152/908 22 09
E-Mail: [email protected]
Halle / Stand 4/D40b
Cannon (www.cannon.com) is an international Group supplying worldwide a widerange of industries with dedicated engineering solutions. Founded in the early 1960‘s to manufacture dispensing machines for Polyurethane foams, Cannon have soon reached - and maintain - the leading position in their mar-ket and extended their field of activities to other fast-growing sectors of the industry. Diversifying into synergistic fields Cannon offer today a wide series of products and services to the industrial manufacturers: in addition to a complete range of plants andmachines for continuous and discontinuous processing of Polyurethanes and other po-lymers obtained by chemical reaction (manufactured in Europe, USA, China and Japan) the Group supplies equipment for Thermoforming, Composite Materials, AluminiumDie-casting, Industrial Electronic controls, Industrial Boilers, Thermal Fluid Heaters, Water Treatment plants and solutions for the protection of the Environment.
CANNON SPA
Via Resistenza, 12
20068 Peschiera Borromeo (MI), Italy
Tel.: +39 02 48451 1
Fax: +39 02 48451 222
E-Mail: [email protected]
Web: www.cannon.com
Halle / Stand 6/A24
67
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsCar - Cat
C
Cato Composite Innovations BVPO Box 26Verhuellweg 9
6984 AA Doesburg, The Netherlands
Tel.: +31 313 480367
Fax: +31 313 480370
E-Mail: [email protected]
Web: www.catoci.com
Halle / Stand 6/D12
CARUS has been at the cutting edge of moulded polyurethane foam since 1979, sup-plying several markets worldwide with tailor-made solutions. In recent years, CARUS has developed pre-shaped tailor-made foam cores for RTM processes with great success. Its advantages in terms of designing freedom, repeatability and production capacity make moulded polyurethane extremely suitable as a core material for RTM processes. All the aspects of CARUS solutions are always developed in cooperation with its customers.
Carus Srl
Via U.Bracalenti 5/7
32020 Limana, Italy
Tel.: 0039 0437 967 313
Fax: 0039 0437 967 171
E-Mail: [email protected]
Web: www.carus.it
Halle / Stand 6/D02
Carbopress Composites is an Italian company with international relationships in the automotive industry and it is located in Modena, in the middle of the Italian “MotorValley”.
It is a part of Atomo Group, an Industrial Holding, which is involved in Engineering andR&D in the fields of light weight body & trim, chassis, structures and suspension, high performance engine & transmission as well as lightweight materials research.
Within the Group, Carbopress develops production process and technologies as well as unique patented solutions and it manufactures a wide range of advanced compositematerials for automotive market, as Body in White Pressed Panels, Class A SMC Advan-ced, Compression Molding, Pressed Structure & Frames.
Carbopress Composites SRL
Via Del Tirassegno 55
41122 Modena, Italy
Tel.: +39 059 7353520
Fax: +39 059 7353028
E-Mail: [email protected]
Web: www.carbopress.com
Halle / Stand 4/D06
Die Firma Carbonlack steht für kompetenten Service und professionelle Beratung, in Sachen Composite, Sichtcarbon und Rennsportlackierungen in einzel, klein und Groß-serien. Unser Hauptbereich ist das lackieren von Kohlefaser Serienteilen unter anderem fürdie: Automobilindustrie, Medizintechnik, sowie für Firmen im Sport- und Freizeitsektor.Wir achten dabei extrem auf gleichbleibende höchste Qualität, sowie eine reibungslose termingerechte Lieferung. Auch bei der Serienlackierung sind unserer Bandbreite keine Grenzen gesetzt, ob Sicht glänzend, verschiedenen Mattheits - oder Glanzgraden, far-big, lasierend oder vorgrundiert. Wir besitzen 3 verschiedene Farbmischbänke mit einer Auswahl von ca. 60000 Farbtönen, somit können wir kurzfristig jeden Farbwunsch realisieren. Zu unserer Betriebsausstattung gehören derzeit 3 Stück Lackier- und Trockenanlagen, UV Härtegeräte sowie eine Produktions-fläche von ca. 900 m2.
Carbonlack Dobler e.k.
Eichelreuth 1
83224 Grassau, Germany
Tel.: +49 8641 3549
Fax: +49 8641 1824
E-Mail: [email protected]
Web: www.carbonlack.com
Halle / Stand 6/F18
Cato Composite Innovations BV is focusing on the development and manufacturing of thermoplastic composite components and parts. For series varying from 1.000 to1.000.000 products/year, Cato provides a development and manufacturing solution formonolithic, forged, sandwich and hybrid parts all made from thermoplastic composite materials. Specifically, Cato has expertise and facilities for making hybrid compo-nents from endless fibre reinforced thermoplastic composites and injection mouldedmaterials. With over 20 years of experience in thermoplastic composites, Cato usesapplication-optimized materials, starting from 5 EUR/kg. With in-house engineering capabilities, 7 production presses as well as 11 injection moulding lines, Cato is one of the best equipped companies focussing on the development and manufacturing of thermoplastic composite components worldwide.
68
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsCcp - Cet
C
Cetex ist das Forschungsinstitut in Deutschland für neue Technologien und Ma-schinen zur Herstellung textilbasierter Halbzeuge, Funktionskomponenten undHochleistungsstrukturen. Das Cetex Institut hat sich für alle Kunden des Textil- und Verarbeitungsmaschinenbaus zu einem Ideengeber und leistungsfähigen Partner für die anwendungsorientierte Forschung entwickelt. Von der ursprünglichen Basis des klassischen Textilmaschinenbaus haben sich die Aktivitäten und Tätigkeitsschwerpunk-te zunehmend auf Maschinen für technische Textilien und nichttextile Anwendungenerweitert. Im Mittelpunkt stehen Verfahrens- und Materialentwicklungen zu endlosfaserverstärk-ten Halbzeugen und komplexen Preformen sowie die Maschinen zu deren Herstellung. Der Konzeption und der Erprobung großserientauglicher Technologien für den multi-funktionalen Leichtbau kommt dabei zentrale Bedeutung zu.
Cetex Institut für Textil- undVerarbeitungsmaschinen gGmbHAltchemnitzer Str. 11
09120 Chemnitz, Germany
Tel.: 0049 37152770
Fax: 0049 3715277100
E-Mail: [email protected]
Web: www.cetex.de
Halle / Stand 4/D03
CEL, created in 1992, is one of the main European suppliers of light weight sandwich panels honeycombs and foams.
We produce aluminium, polycarbonate and polypropylene honeycomb.The honeycomb and foam cores are combined in sandwich panels with skins made of different materials: aluminium, hpl, plywood, fiberglass. In this way, our wide range of products are used for different applications and in diffe-rent sectors such as: shipyards, railway, interiors, construction industry, wind industry,for support of marbles and as deflectors for air flows.
CEL Components S.r.l.
Via Santi, 1
40055 Villanova di Castenaso, Italy
Tel.: 0039 051 782505
Fax: 0039 051 782477
E-Mail: [email protected]
Web: www.cel.eu
Halle / Stand 6/E04
CCPITChina Council for the Promotion of International TradeNo. 1 Fuxingmenwai Street
Beijing 10086, China
Tel.: 0086 10 88075066
Fax: 0086 10 88075423
E-Mail: [email protected]
Web: www.ccpit.org
Halle / Stand 6/A21, 6/B36i
Subsidiary of the TOTAL group, CCP Composites develops and produces Unsaturated Polyester Resins, Gel Coats and derivatives. Leader in thermoset composites, CCP Composites products combine quality, innovation and eco-design preserving the en-vironment as a responsible business creating progress.CCP Composites is present in 9 countries, with 18 production sites on 4 continents. Its R&D is organized in 3 skills centers (UPR in France, Vinyl ester in Korea, Gel coat in USA).
CCP Composites
16 - 32 rue Henri Regnault
92400 Courbevoie, France
Tel.: 0033 1 47 96 99 64
Fax: 0033 1 47 96 99 86
E-Mail: [email protected]
Web: www.ccpcomposites.com
Halle / Stand 4/D20a, PDA_Foyer_3
69
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsCfk - Che
C
“chemie & more“succidia AGRösslerstr. 88
64293 Darmstadt, Germany
Tel.: 06151 360 56 0
Fax: 06151 360 56 11
E-Mail: [email protected]
Web: www.succidia.de
Halle / Stand 6/C30 Media Pavilion
“www.chemiaibiznes.com.pl“EPS Media Ewelina Plonska-Stepulakst. Miklaszewskiego 6/64
Warsaw 02-776, Poland
Tel.: +48 22 253 81 01
Fax: +48 22 253 81 01
E-Mail: [email protected]
Web: www.chemiaibiznes.com.pl
Halle / Stand 6/C30 Media Pavilion
CG TEC GmbHCarbon- & GlasfasertechnikGewerbepark Hügelmühle 41
91174 Spalt, Germany
Tel.: 09175 90807 0
Fax: 09175 90807 20
E-Mail: [email protected]
Web: www.cg-tec.de
Halle / Stand 6/B04
Der CFK-Valley Stade e.V. wurde im Jahre 2004 gegründet und hat sich zu einemetablierten Kompetenznetzwerk für carbonfaserverstärkte Kunststoffe (kurz CFK) entwickelt. Heute zählen mehr als 100 nationale und internationale Unternehmen und Forschungseinrichtungen zum Netzwerk, die bestrebt sind die industrielle Fertigungstechnik voranzutreiben und das Einsatzspektrum von CFK zu erweitern. Allein die AIRBUS Operations GmbH, die weltweit zu den erfahrensten Verarbeitern von CFK-Bauteilen gehört, bringt 30 Jahre Expertise in das Kompetenznetzwerk ein. Neben weltmarktführenden, bekannten Großunternehmen sind im Netzwerk geradeviele kleine- und mittelständische hoch innovative Betriebe sowie Spezialisten aus der industriellen Großforschung und den Universitäten aktiv. Die Konzentration vonExpertenwissen über die komplette Wertschöpfungskette - von der Lehre, Forschung, Entwicklung und Produktion bis hin zum Recycling- ist in dieser Form europaweiteinmalig.
CFK-Valley Stade e.V.
Ottenbecker Damm 12
21684 Stade, Germany
Tel.: +49 4141 40740-0
Fax: +49 4141 40740-29
E-Mail: [email protected]
Web: www.cfk-valley.com
Halle / Stand 4/D40f
70
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsCho - Cms
C
C.M.S. S.p.A ist der international führende Hersteller von CNC-Fräsmaschinen zurBearbeitung von Verbundwerkstoffen, Kunststoffen, Aluminium, Naturstein, Glas, Mas-sivholz und Holzwerkstoffen.
Unsere kundenspezifischen Lösungen für die CNC-Bearbeitungscenter basieren auf einem ausgeklügelten modularen Maschinenbau. Durch die fast unbegrenzten Kombi-nationsmöglichkeiten können für alle Bearbeitungsanforderungen die entsprechenden Anwendungslösungen gefunden werden.
C.M.S. Deutschland GmbH ist Ihr kompetenter Ansprechpartner vor Ort für Deutsch-land, Österreich und die Schweiz. Für weitere Informationen besuchen Sie unsere Homepage: www.cms-maschinen.de
CMS Deutschland GmbH
Heinzelsleite 13
95326 Kulmbach, Germany
Tel.: 0049 9221 924460
Fax: 0049 9221 924939
E-Mail: [email protected]
Web: www.cms-maschinen.de
Halle / Stand 6/A11
Der Cluster Neue Werkstoffe der Bayern Innovativ GmbH ist die Informations- undKommunikationsdrehscheibe auf dem Gebiet Neue Materialien. Ziel ist es, den werkstoff- und branchenübergreifenden Technologietransfer voranzutreiben sowie be-darfsorientiert technologische Fragestellungen zu identifizieren, die durch pro-aktiveNetzwerktätigkeiten bearbeitet werden. Des Weiteren leistet der Cluster einen aktiven Beitrag zur Initiierung von technologieorientierten Verbundprojekten mit regionaler Wertschöpfung. Der Cluster fokussiert seine Tätigkeit auf sieben Themenfelder von me-tallischen Leichtbauwerkstoffen über Faserverbundwerkstoffe bis hin zu Kunststoffenund Glas. Hier haben sich bereits bayernweite Cluster-Kreise etabliert. Themenorien-tierte Cluster-Treffs bei Firmen und Instituten führen gezielt Experten und potentielle Kunden zusammen. In Cluster-Kreisen verdichtet der Cluster Themen bis auf Projekte-bene und unterstützt Partner in der marktorientierten Projektarbeit.
Cluster Neue WerkstoffeBayern Innovativ Gesellschaft für Innovation und Wissenstransfer mbHGewerbemuseumsplatz 2
90403 Nürnberg, Germany
Tel.: 0911 20671 0
Fax: 0911 20671 766
E-Mail: [email protected]
Web: www.cluster-neuewerkstoffe.de
Halle / Stand 6/B04
Chromaflo Technologies is the combination of the former Plasticolors Inc. and theColortrend global colorants business. Our diverse technical and custom manufacturing capabilities provide color solutions to meet the most complex requirements for the Coatings and Thermoset Plastics markets. Chromaflo Technologies is headquartered in Ashtabula, Ohio, and has production facilities in the United States, Canada, The Netherlands and Australia. Sales and technical capabilities are provided throughout North and South America, Europe, Australia, China, and Malaysia.
In Europe manufacturing and technical support is provided from our Maastricht site inThe Netherlands. Chromaflo supplies all of Europe, North Africa and the Middle East from Maastricht.
Our technologies include color pastes for unsaturated polyester, polyurethane andepoxy applications as well as thickeners for SMC and BMC.
More information is available from www.chromaflo.com.
Chromaflo Technologies B.V.
Ankerkade 101
6222 NL Maastricht, The Netherlands
Tel.: +31 437505016
Fax: +31 433622238
E-Mail: [email protected]
Web: www.chromaflo.com
Halle / Stand 6/A40
Driven by its core values of creativity and innovation since 1898, CHOMARAT is aninternational textile group. Operating globally on 4 continents, the group employs1500 people and is composed of three strategic business units: Composites, Textiles and Fashion.
CHOMARAT incorporates over 25 different process and manufacturing technologies.This diversified approach positions it as a privileged partner for your projects and international developments.
For Composites manufacturing and related process industries, CHOMARAT provides alarge spectrum of technical reinforcements (glass, aramid, carbon), specially designed to match a variety of composite process requirements for many market applications. Chomarat manufactured products include Rovicore™ and Roviply™ family of products for RTM and infusion processes, woven and mutiaxial fabrics.Chomarat develops its carbon range with C-Ply™ and C-Weave, tailored to the directprocesses (RTM, Infusion) in strong development
CHOMARAT Textiles Industries
39 avenue de Chabannes
07160 Le Cheylard, France
Tel.: +33 4 75 29 81 00
Fax: +33 4 75 29 82 05
E-Mail: [email protected]
Web: www.chomarat.com
Halle / Stand 4/B30
71
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsCol - Com
C
Compositence has realized a major process innovation for high performance compositepreform production.
Our patented manufacturing system produces 3D preforms directly from continuous rovings. Our customers benefit from short tact times, cost-effective production, and fi-ber waste below 10%. Part design and manufacturing process are software-supported.
Typical applications include load bearing structural parts, for example in vehicles, windturbines, aerospace or machinery. We also offer engineering and production of composite parts with unique surface designs.
Please visit our website www.compositence.de or stop by at our booth E 16 in Hall 6 atComposite Europe 2013 in Stuttgart for further information.
Compositence GmbH
Mollenbachstr. 25
71229 Leonberg, Germany
Tel.: +49 7152 569 0 110
Fax: +49 7152 569 0 199 10
E-Mail: [email protected]
Web: www.compositence.com
Halle / Stand 6/E16
Compositech ist ein dynamisches Unternehmen, das Dienstleistungen wie Konstruktion Entwicklung und Herstellung von CFK Komponenten bietet. Compositech unterstütz Rennsport Automobilen Herstellern, Prototypen Designers, Medizintechnik, Luftfahrt und Militär Kunden. Compositech herstellt Autoklav Technologie Komponenten und durch das interne Modellbau Abteilung und die 5 Achsen Portalfräsmaschine, in der Lage zu produzieren alle Komponenten ohne externe Lieferanten ist. Das ist Garantie für schnelle Lieferzeit,Kosten Ersparnis und absolute Vertraulichkeit.
Compositech Srl
via Maú 17/2
33035 Martignacco (UD), Italy
Tel.: 0039 0432 678918
Fax: 0039 0432 637622
E-Mail: [email protected]
Web: www.compositech.it
Halle / Stand 4/C04
COMPOSE
8 bis avenue de la Gare
01100 Bellignat, France
Tel.: +33 (0)4 74 73 28 83
Fax: +33 (0)4 74 73 99 64
E-Mail: [email protected]
Web: www.compose-tools.com
Halle / Stand 6/D23
Columbus Presstechnik ist seit über 35 Jahren im Markt und bietet eine große und vielseitige Auswahl von Maschinen zum Formverleimen, Formfurnieren, 3D Folienummanteln sowie zum Aufheizen und Verformen von thermoplastischen Werkstoffen an.
COLUMBUS Handelsgesellschaft m.b.H.
Thierseestraße 9
83088 Kiefersfelden, Germany
Tel.: +49 8033 979 705
Fax: +49 8033 979 758
E-Mail: [email protected]
Web: www.columbus-tech.com
Halle / Stand 6/G32
72
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsCom - Com
C
COMPOSITES EUROPE- Rebooking Area -Völklinger Str. 4
40219 Düsseldorf, Germany
Tel.: +49 211-90191-325/-224
Fax: +49 211-90191-122
E-Mail: [email protected]
Web: www.composites-europe.com
Halle / Stand 4/C01
COMPOSITES EUROPE- Product Demonstration Area -Völklinger Str. 4
40219 Düsseldorf, Germany
Tel.: +49 211-90191-202
Fax: +49 211-90191-122
E-Mail: [email protected]
Web: www.composites-europe.com
Halle / Stand 4/PDA, PDA_Foyer
COMPOSITES EUROPE- Messeleitung / Show Management -Völklinger Str. 4
40219 Düsseldorf, Germany
Tel.: +49 211-90191-307/-129/-202/-226
Fax: +49 211-90191-122
E-Mail: [email protected]
Web: www.composites-europe.com
Halle / Stand 4/C01
COMPOSITES EUROPE- Forum -Völklinger Str. 4
40219 Düsseldorf, Germany
Tel.: +49 211-90191-330
Fax: +49 211-90191-122
E-Mail: [email protected]
Web: www.composites-europe.com
Halle / Stand 6/C28
73
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsCom - Com
C
Noncommercial organization Union of composites manufactures (UNCM Russia) wasestablished in 2004 by producers or reinforcing materials with the aim of protection of interests of producers of composites materials operating on the Russian markets.
At the present time the UNCM joins manufactures of continuous reinforcing materials and reinforced plastic, producers of specialized equipment, scientific organizations,trading companies.
The Union assists in problems solving and creates the favorable conditions for develop-ment of each enterprise – the Union’s member.
“Composite World“Union of Composites Manufacturers (UNCM)PObox 49
Moscow 117292, Russia
Tel.: 007 495 984 76 74
Fax: 007 495 984 76 74
E-Mail: [email protected]
Web: www.uncm.ru
Halle / Stand 4/A35,6/C30 Media Pavilion
COMPOSITE SOLUTIONSCOMPOSITE MATERIALS AND NEW TECHNOLOGIES FOR ADVANCED PRODUCTS
Published since 2007, Composite Solutions is the first Italian/English magazine dedica-ted to industry professionals. Our readers design, produce, distribuite, composite products for the industry (automo-tive, aerospace, building and construction, boatbuilding, corrosion resistant equipment, wind energy, and more)In the years it has gained a reputation for delivering high quality information valued by the global composites community.Composite Solutions is read worldwide as distribution combines print and digital. To download a copy of the magazine, please visit our website www.compositesolutions.it
“Composite Solutions“CREI srlVia Ponte Nuovo, 26
20128 Milano, Italy
Tel.: 0039 02 26305505
Fax: 0039 02 26305621
E-Mail: [email protected]
Web: www.compositesolutions.it
Halle / Stand 6/G49, 6/C30 Media Pavilion
COMPOSITES EUROPE- VIP Lounge -Völklinger Str. 4
40219 Düsseldorf, Germany
Tel.: +49 211-90191-265
Fax: +49 211-90191-122
E-Mail: [email protected]
Web: www.composites-europe.com
Halle / Stand Eingang Ost/Entrance East
COMPOSITES EUROPE- Recruiting Area -Völklinger Str. 4
40219 Düsseldorf, Germany
Tel.: +49 211-90191-265
Fax: +49 211-90191-122
E-Mail: [email protected]
Web: www.composites-europe.com
Halle / Stand 6/Gallery
74
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsCom - Cor
C
CORATEC ist ein eigenständiges, international tätiges Industrieunternehmen aus Gunzgen - Schweiz.
Wir entwickeln, produzieren und vertreiben grossformatige Verbundelemente ausleichten Mittellagen (Schäumen, Waben, etc.) und Deckschichten aus Aluminium, Stahl, glasfaserverstärktem Polyester und anderen Materialien.
Unsere Produkte werden in der Architektur, im Fahrzeugbau und in der Industrie an-gewendet und unter den Marken CORAPAN®, CORAHEX®, CORAFAIR® und CORAROC®vertrieben.
CORATEC AGVerbundelemente TechnologieIndustriestrasse 33
CH-4617 Gunzgen, Switzerland
Tel.: +41 (0) 62 209 66 66
Fax: +41 (0) 62 209 66 67
E-Mail: [email protected]
Web: www.coratec.ch
Halle / Stand 6/B34
„Kompozit 21“ www.kompozit21.ru ist ein anerkannter Fachverlag und veröffentlicht mit „construction materials“, „concrete technologies“, „roofing& insulating material“ und „dry mortars & plasters“ gleich 4 der bedeutendsten und auflagenstärksten Bau-fachmagazine in Russland und den GUS.
AK marketing & consult ist die weltweite Exklusivvertretung mit einem Sitz in Deutschland www.krajacic.de
“construction materials, equipment, technologies of 21 century“AK marketing & consultAm Torsee 2
96132 Schlüsselfeld, Germany
Tel.: +49 9552 9294704
E-Mail: [email protected]
Web: www.krajacic.de
Halle / Stand 6/C30 Media Pavilion
Neue Wege, neue Möglichkeiten. CONNOVA bietet alle Schritte auf dem Weg zumComposite-Bauteil: vom Engineering, Konstruktion über den Formbau bis zur Fertigung.Wir unterstützen Sie auf Wunsch bereits bei der Machbarkeitsstudie und beim Berech-nen der Idealform.
Modernste Produktionsanlagen sorgen für unschlagbare Qualität unserer Verbundwerk-stoffe.
CONNOVA steht für Höchstleistung aus einer Hand.
Connova AG
Durisolstrasse 8
5612 Villmergen, Switzerland
Tel.: +41 56 619 10 90
Fax: +41 56 619 19 99
E-Mail: [email protected]
Web: www.connova.com
Halle / Stand 4/B10
Mit über 25 Jahren Praxiserfahrung in der Kunststoffverarbeitung bietet die Composyst GmbH ganzheitliche Beratungsleistungen, Fertigungsunterstützung vom kooperativen Projektmanagement bis zur Serienreife sowie innovative Materialien und Prozesshilfen. Luftfahrtindustrie, Windkraft, Schiffsbau und Automobilfertigung sind die Innovati-onstreiber im Bereich der faserverstärkten Leichtbautechnologie und Basis für unsere umfangreiche Branchenkompetenz.
Die Schwerpunkte der Composyst GmbH liegen in der Konzeption und Fertigungsbera-tung sowie in der Herstellung von hochqualitativen Faserverbundbauteilen mithilfe des Vacuum Assisted Process VAP®.
COMPOSYST GmbH
Gewerbestraße Nord 12
86857 Hurlach, Germany
Tel.: +49(0)8248-969555-0
Fax: +49(0)8248-969555-9
E-Mail: [email protected]
Web: www.composyst.com
Halle / Stand 4/B12
75
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsCor - Cre
C
Composites Industry Directory – CID
In the Directory, you will find company profiles & technical data concerning thecomposites materials industry, process machinery, equipment, all the suppliers of the market listed below.
Composites Industry Directory – CID is dedicated to:
NAGEMENT
CREI - Centro Ricerche EditorialiInternazionali SrlVia Ponte Nuovo, 26
20128 Milano, Italy
Tel.: 0039 02 26305505
Fax: 0039 02 26305621
E-Mail: [email protected]
Web: www.compositesolutions.it
Halle / Stand 6/G49, 6/C30 Media Pavilion
CoTexx® Knitted Heating Fabric made of stranded copper wire is a semi finished product for manufacturing of electrical panel heaters, e.g. in tools for the production of fibre-reinforced composites, with an extremely homogenous, water-quench like dis-tribution of heat and unbeatable economic efficiency. Its implementation is not onlylimited to thermosetting resins as matrix but also used with elastomers like silicone or thermoplastics like polyethylene. If demanded CoTexx GmbH consults you on usage and application incl. process and control technology and provides the appropriateprocess control units and software.
CoTexx GmbH was founded for implementation of industrial research and development of high-tech products and processes, which use the natural biocidal and antiseptic effects of non-ferrous and precious metals. For to produce the developed products atmarketable prices, a production line for knitted technical textiles was set up which is now open to other industrial sectors.
CoTexx GmbH
Johannesstr. 27
86565 Gachenbach, Germany
Tel.: 08259 828 781
Fax: 08259 828 783
E-Mail: [email protected]
Web: www.cotexx.com
Halle / Stand 6/B04
Based in France, Germany and Canada, Coriolis Composites provides robotic cells andsoftware for fibre placement. The company supplies its products to the commercial ae-rospace, automotive, wind turbine industry and Yachting.Our products:The _”,8 and 16 fiber thermoset, dry and thermoplast and the laser heating device. The high productivi-ty 25m collaborative robotic cell with 2 heavy duty KR500 robots from Kuka equipped with a new generation creel.The 1/8“ 16 fiber bidirectional head. Within ten years,Coriolis Composites has earned a leading role in the aerospace industry and has now an industrial dimension with international contracts, the development of new productsthrough its expertise in robotics, software development and composites engineering.The size of the company has grown from 3 engineers at its creation in 2001 to 70 late 2012. The turnover exceeded 11 million in 2012.
CORIOLIS COMPOSITES SAS
Z.A. du Mourillon Rue Condorcet
56530 Queven, France
Tel.: +33 (0)2 97 59 94 98
Fax: +33 (0)2 97 59 90 24
E-Mail: [email protected]
Web: www.coriolis-composites.com
Halle / Stand 4/B04
COREX-HONEYCOMBa devision of Encocam Ltd.5 Stukeley Business Centre Blackstone Road
Huntingdon CAMB PE29 6EF, United Kingdom
Tel.: 0044 1480 435302
Fax: 0044 1480 450181
E-Mail: [email protected]
Web: www.corex-honeycomb.com
Halle / Stand 6/F42
76
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsCro - Cut
C
Die Firma Cuttec produziert CNC Anlagen zum Schneiden, Fräsen, Kleben sowie Waren-schaumaschinen, Abwickler, Lege- und Zuschneidemaschinen. Von der Elektroschere bis zum CNC Cutter bekommen Sie alles aus einer HAND
Cuttec GmbH
Steinbosstraße 43
89191 Nellingen, Germany
Tel.: 07337 921 310
Fax: 07337 921 311
E-Mail: [email protected]
Web: www.cuttec-gmbh.de
Halle / Stand 6/F31
CT Platon BV and CT Platon GmbH is next in the Netherlands for the different foreignmarkets developed to a level of reliable partner for the polyester processing industry mainly in Benelux, Germany and some new Member States in the EEC. Reliable when it comes to production equipment, the aftercare and service of this equipment and pro-cesses, in which the equipment is used. Since 1971, an extensive knowledge developed with and about MVP (Magnum Venus Plastech) systems and equipment, Irac rege-nereerapparatuur rinse and cleaning and washing stations, measuring and regulating equipment - including electronic controls and registration (Intulogic). This addition to maintaining close contacts with almost all suppliers to the polyester processingindustry for raw materials, accessories and systems.
CT Platon GmbH
Bruningsstraat 2
4251 LA Werkendam, The Netherlands
Tel.: 0031 183 505 548
Fax: 0031 183 500 482
E-Mail: [email protected]
Web: www.ctplaton.nl
Halle / Stand 4/B37
CSA Composite, was established in Yalova, in 2010, as one of the leading firms in Turkey, engaged in manufacturing of carbon fiber textile products. As of 2011, our product range includes 200-620 g/m2, plain and twill woven carbon fiber fabrics. Weare diversifying our product range by closely monitoring market trends and demands.We have been supplying carbon fabric for a lot of different sectors in Turkey, including aviation and defense industry, marine sector, industrial applications and civil enginee-ring reinforcement applications.
CSA COMPOSITE
TASKOPRU SANAYI SITESI 3.YOL NO:55
YALOVA 77040, Turkey
Tel.: +90 226 814 2261
Fax: +90 226 814 2261
E-Mail: [email protected]
Web: www.csacomposite.com
Halle / Stand 4/E01
CrossLink ist ein am Markt sehr gut etablierter Partner für Produkte und Bauteileim Bereich Hochleistungsfaserverbundtechnik mit einem breiten Leistungsspektrum individueller Lösungen. Wir entwickeln und fertigen nach neuesten wissenschaftlichen Forschungserkenntnissen u. modernsten Qualitätsstandards Leichtbauteile von höchs-ter Qualität für Spezial- u. Serienfertigung. CrossLink arbeitet in den Bereichen F & E, Maschinenkomponenten, Medizintechnik, Automobil, Sport, Ballistik.
Dank der effizienten Unternehmensstruktur - zertifiziert nach DIN EN ISO 9001:2008 - ist CrossLink in der Lage, sein gesamtes Leistungsspektrum maßgeschneidertund zielgerichtet für Sie einzusetzen: Entwicklung und Konstruktion (CATIA VS); 3D-Messzentrum (Zeiss Prismo); F&E zusammen mit namhaften Institutionen; Eigener Werkzeugbau; Inhouse assembly; Einzel- und Kleinserien, grössere Serien in klima-kontrollierten Produktionsräumen; Bei Serienfertigung: Just-in-Time Produktion für Lieferungen ans Band.
CrossLink FaserverbundtechnikGmbH & Co. KGSchwadermühlstr. 15
90556 Cadolzburg, Germany
Tel.: 09103 7165 0
Fax: 09103 7165 111
E-Mail: [email protected]
Web: www.crosslink-fibertech.de
Halle / Stand 6/D41
77
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsCyt - Dbf
D
Basaltfasern - die neue wirtschaftliche Alternative
Basalt-Fasern sind natürliche Mineralfasern geologischen Ursprungs ohne chemische Additive.
Besondere Eigenschaften von Basalt-Fasern: Temperaturbeständigkeit (– 273 °C bis 800 C), Chemikalienbeständigkeit, hohe mecha-nische Festigkeit, geringer spezifischer Längenausdehnungskoeffizient, Ultraviolettbe-ständigkeit, usw.
Produkte aus Basaltfasern:Stapelfasern, Gewebe, Vliesstoffe, Rebars, Rovings sowie Spezialartikel
DBF - Deutsche Basalt Faser GmbH
Julius Hornung Str. 11
06526 Sangerhausen, Germany
Tel.: +49 3464279290
Fax: +49 3464279295
E-Mail: [email protected]
Web: www.deutsche-basalt-faser.de
Halle / Stand 4/D03
Dassault Systèmes Deutschland GmbH
Meitnerstrasse 8
70563 Stuttgart, Germany
Tel.: 0711 27300 0
Fax: 0711 27300 599
E-Mail: [email protected]
Web: www.3ds.com
Halle / Stand 6/C12
Dantec Dynamics GmbH
Kässbohrerstr. 18
89077 Ulm, Germany
Tel.: 0731-933-2200
Fax: 0731-933-2299
E-Mail: [email protected]
Web: www.dantecdynamics.com
Halle / Stand 4/C02
Cytec Industrial Materials is focussed on supporting the drive for lightweight, high-performance, cost-effective, multi-material solutions, and continues to refine and expand its portfolio of thermoset and thermoplastic composite materials andtechnologies, and compatible process consumables to fulfil the growing needs of all markets.
The automotive market is a key strategic sector where we are supporting OEMs and their supply chains in the development and delivery of the materials and application technologies to help clients meet the legislative requirements set for the industry. Wemanufacture structural materials for primary, secondary, high temperature and impactapplications, body panels and trim.
With a focus on all aspects of composites processing, we supply and manufacture a wide range of compatible vacuum bagging consumables - also available as kits, and continue to support all of our clients’ requirements by developing unique tooling materials and hardware.
Cytec
Composites House, Sinclair Close Heanor Gate Industrial
Estate
Heanor DER DE75 7SP, United Kingdom
Tel.: 0044 1773 766200
Fax: 0044 1773 530245
E-Mail: [email protected]
Web: www.cytec.com
Halle / Stand 4/B21
C
78
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsDbk - Del
D
Delcotex ist Spezialist für die Herstellung technischer Gewebe. Wir verarbeiten Filamente aus Polyamid, Polyester, Aramid, Viscose, Acetat, Carbon,PPS etc. in Geweben von 20 g/m_ - 1.500 g/m_, Breite bis zu 540 cm. Unsere Produkti-onsmenge liegt bei über 25 Mio.m_/Jahr. Ein großer Anteil unserer Gewebe sind Gitter-strukturen, welche als Strukturverstärkung in Weich- und Hartkunststoffen verwendet werden. Weitere Informationen unter www.delcotex.de/www.textillabor.eu Delcotex ist specialized in technical fabrics. We are using filaments of polyamide,polyester, aramide, viscose, acetate, carbon, PPS, etc. for fabrics with weight from 20g/sqm up to 1.500 g/sqm, width up to 540 cm. Our production volume per year is over 25 mio. sqm. Most of our fabrics are scrim fabrics for reinforcing the polymer structurein soft and hard plastics. More information under www.delcotex.de/www.textillabor.eu
Delcotex DeliusTechtex GmbH & Co. KGVilsendorfer Str. 50
33739 Bielefeld, Germany
Tel.: 05206 9107 0
Fax: 05206 9107 60
E-Mail: [email protected]
Web: www.delcotex.de
Halle / Stand 4/F14
DEKUMED Kunststoff- und Maschinen-vertrieb GmbH & Co. KG
Am Anger 27
83233 Bernau, Germany
Tel.: 08051 967 33
Fax: 08051 967 3444
E-Mail: [email protected]
Web: www.dekumed.de
Halle / Stand 6/C38
Mit der MTI®-Leitung bietet DD-Compound die Innovation für die Vakuuminfusion zurHerstellung von Laminaten aus faserverstärkten Kunststoffen. MTI® steht für Mem-brane Tube Infusion und beschreibt eine Membran ummantelte Absaugleitung für dieVakuuminfusion. Dabei handelt es sich um eine Gas durchlässige und Harz sperrende Leitung, die zum Evakuieren der Luft eingesetzt wird.
Der Einsatz der MTI®-Leitung erhöht die Prozesssicherheit der Vakuuminfusion deutlichbei sinkenden Kosten. Die so hergestellten Bauteile weisen eine überdurchschnittliche Laminatqualität auf. Zudem kann die MTI®-Leitung bei jeder Bauteilgröße und Kom-plexität zum Einsatz kommen, von kleinen Sichtteilen bis hin zum Rotorblatt einer Windkraftanlage.
Gerne überzeugen wir Sie vor Ort von den Vorteilen der MTI®-Leitung. Wir freuen uns Sie in Halle 6, Stand E14 bei den jungen innovativen Unternehmen zu begrüßen.
DD-Compound UG
Am Friedhof 14a
49477 Ibbenbüren, Germany
Tel.: 054519953277
E-Mail: [email protected]
Web: www.dd-compound.com
Halle / Stand 6/E14
DBK David + Baader GmbH. Als Spezialist für Elektrowärme und Elektronik heizt die DBK David + Baader GmbH ihren Industriekunden seit 1946 ein. Das international agierende Unternehmen mit Sitz im südpfälzischen Rülzheim bietet deutsche Wertar-beit in Konzepterstellung, Entwicklung, Validation und Serienproduktion – sowohl von Standardprodukten als auch von kundenspezifischen Lösungen. Nahezu jeder Deutschewar schon einmal in Berührung mit den Produkten des vielfachen Marktführers – auch wenn es die wenigsten wissen. Denn DBK Heizelemente sind in viele Alltagsgeräte integriert, in denen es irgendwie um Wärme geht.
Bereich IndustrieOfensystemeSeit der Gründung der Firma David + Baader 1946 werden Industrieöfen am StandortKandel gefertigt. Als Spezialist für Industrieöfen aller Art fertigt DBK für jeden Kunden die passende Lösung. Vom Standardofen bis hin zum kompletten Projekt mit hochgra-diger Automatisierung.
DBK David + Baader GmbH
Josef-David-Str. 1
76870 Kandel, Germany
Tel.: 07272 7704 1197
Fax: 07272 7704 1140
E-Mail: [email protected]
Web: www.dbk-group.de
Halle / Stand 6/G03
79
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsDel - Dia
D
DIAB – weltweit führend im Bereich Sandwichtechnologie.
DIAB entwickelt und vermarktet Produkte, die auf komplizierter Polymer- und Kompo-sittechnologie basieren. Unsere heutige führende Position in der Sandwichtechnologie haben wir mehr als 40 Jahren Erfahrung sowie kontinuierlicher Forschung und Ent-wicklung zu verdanken. Unsere Kernwerkstoffe sind heute ein entscheidender Bestand-teil in einer Reihe von Anwendungsbereichen, in denen hohe Stabilität und geringes Gewicht Grundvoraussetzungen für eine bessre Wirtschaftlichkeit sind. Dazu gehörenunter anderem die Windenergie, Luft- und Raumfahrt Schiffbau und Bahnindustrie. Unser Unternehmen ist weltweit vertreten und bietet unseren Kunden Unterstützungin allen Bereichen an.
DIAB GmbH
Max-von-Laue Str. 7
30966 Hemmingen, Germany
Tel.: 0511 42034 0
Fax: 0511 42034 38
E-Mail: [email protected]
Web: www.diabgroup.com
Halle / Stand 4/F25
Die DG Flugzeugbau GmbH hat ihr Hauptgeschäftsfeld in der Entwicklung und Serien-fertigung von Segelflugzeugen und Motorseglern in Faserverbundbauweise.
Wir können dank Jahrzehnte langer Erfahrung im Bereich Leichtflugzeugbau auf hoch qualifizierte Mitarbeiter zurückgreifen.
Aufgrund dieses Know-hows sind wir in der Lage, Sie über den Flugzeugbau hinaus mitComposite Lösungen aller Art zu unterstützen.
Zudem bieten wir umfassenden Service und Wartung für Flugzeuge gem. Part M der EASA an.
Das Engineering ist ein weiterer Bereich unseres Unternehmens, den wir als Dienstleis-tung für Projektrealisierungen anbieten.
DG Flugzeugbau GmbH
Otto-Lilienthal-Weg 2
76646 Bruchsal, Germany
Tel.: +49 7251 3020 110
Fax: +49 7251 3020 200
E-Mail: [email protected]
Web: www.dg-flugzeugbau.de
Halle / Stand 4/F04
Delta-Tech Spa is an independent company founded in 1999 with the mission of pro-viding products and services to the composite materials industry. Delta-Tech develops and fabricates resin matrices, while controlled company Delta-Preg produces prepregs using matrices supplied by Delta-Tech. The prepreg product range includes woven fabrics, multiaxial fabrics and unidirectional tapes fabricated with solvent coating or hot-melt technologies. Most production is based on carbon fibre, but also glass, aramid and special fibres are used. Delta-Tech provides technical support and specific solutions to part manufacturers, designers, consultants, OEM’s, to obtain the best results with prepreg technology.
DELTA-PREG S.P.A. UNINOMINALE
Localita‘ Bonifica del Tronto
64016 Sant‘Egidio Alla Vibrata (TE), Italy
Tel.: 0039 0583 269080
Fax: 0039 0583 269081
E-Mail: [email protected]
Web: www.delta-tech.it
Halle / Stand 4/C14
Delignit präsentiert ihre ökologischen und wirtschaftlichen auf dem nachwachsendenRohstoff Holz basierenden Bauteil- und Systemlösungen. Das Delignit®-Ausstellungs-programm umfasst Spezialwerkstoffe u.a. als Composite Lösungen und Verbund mit Buchen-Hartholz zur Erfüllung spezieller Anforderungen wie Brandschutz, Spreng-schutz und Durchschußhemmung, Schallschutz, elektrostatische Ableitfähigkeit etc. Im Vergleich zu Stahl erreichen die Werkstoffe bei lediglich 1/10 des Gewichtes bis zu 1/3 der Festigkeiten. Die „High Tech in Holz“ DELIGNIT®-Verbundwerkstoffe finden Einsatz in zahlreichen Verwendungen wie z.B. Automobil-, Schienenfahrzeug-, Luftfahrtindust-rie, Gebäudeausstattungen, Sicherheitselemente, Leichtpanzerungen etc.
DELIGNITBLOMBERGER HOLZINDUSTRIEB. HAUSMANN GMBH & CO. KGKönigswinkel 2-6
32825 Blomberg, Germany
Tel.: +49-(0)5235/966-0
Fax: +49-(0)5235/966-351
E-Mail: [email protected]
Web: www.delignit.com
Halle / Stand 6/C17
80
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsDie - Die
D
Wethje Carbon Composites ist ein führender Hersteller von Carbon Composite Bauteilen für den internationatialen Motorsport, Premium Sportwagen sowie Luft-fahrt- und industrielle Anwendungen. Das Unternehmen wurde 1979 gegründet und beschäftigt derzeit an 2 niederbayerischen Standorten insgesamt 300 Mitarbeiter. Inenger Zusammenarbeit mit KTM Technologies sind wir in der Lage, effiziente Gesamt-lösungen vom Konzept bis zur Serienfertigung von komplexen Composite Bauteilendarzustellen. Im Team entwickelt und produziert das Unternehmen High Tech Produkteaus faserverstärkten Kunststoffen für den High Performance Bereich. Die Einführung von industriellen Standards in der automobilen Carbon Composite Industrie und dieEntwicklung von neuartigen und dem Bauteil angepassten Herstellungsverfahren für Composite Serienbauteile ermöglicht es, erfolgreich am Markt tätig zu sein. Die lang-jährige Zusammenarbeit mit zahlreichen OEM‘s (u. a. Audi, BMW, Bugatti, KMW, KTM, Porsche,VW) bestätigt dieses.
Die Wethje GmbH Kunststofftechnik
Donaustr. 29-41
94491 Hengersberg, Germany
Tel.: +49 (0) 99019333 0
Fax: +49 (0) 99019333 77
E-Mail: [email protected]
Web: www.wethje-gmbh.de
Halle / Stand 4/B04
Diener electronic GmbH + Co. KG ist einer der führenden Hersteller von Nieder-druck-Plasmaanlagen, atmosphärischen Plasmasystemen und HF-Generatoren auf dem nationalen als auch internationalen Markt. Die Hauptanwendungsbereiche der Plasmatechnik sind die Vorbehandlung und Be-schichtung verschiedener Materialien. Dies wird in folgenden Branchen angewendet: Automotive, Analytik, Biotechnologie, Elektrotechnik, Elektronenmikrospkopie, Fein-werktechnik, Forschung u. Entwicklung, Halbleitertechnik, Kunststofftechnik, Medizin-technik, Mikrosystemtechnik, Solarzellentechnik, Textiltechnik, ... Dabei werden verschiedene Oberflächen (wie z.B. Glas, Kunststoffe, Metall, Textilien,Keramik, ...) gereinigt, aktiviert, geätzt, beschichtet oder auch polymerisiert.Eine Plasmabehandlung empfiehlt sich vor dem Lackieren, Verkleben, Bonden, Löten, Vergießen, Bedrucken, Molden oder zur Entfettung, Pulverbehandlung oder auch zurFotolack-Veraschung.
Diener electronic GmbH + Co. KGPlasma-Surface-TechnologyNagolder Str. 61
72224 Ebhausen, Germany
Tel.: 07458 999 310
Fax: 07458 999 3150
E-Mail: [email protected]
Web: www.plasma.de
Halle / Stand 4/B09
Dieffenbacher is an international group of companies that manufactures hydraulic presses and complete press systems for the wood panel industry, the automotive andcomponents industries. As a system supplier, Dieffenbacher offers an extensive range of products and services for processing fiber-reinforced plastics such as LFT, GMT, SMC or in the HP-RTM. Dieffenbacher supplies everything from a single source, from the hydraulic press through to the entire automation and manufacture of the semifinished part in the direct process. The LFT-D and D-SMC direct processes developed by Dief-fenbacher allow long fiber-reinforced thermoplastics (LFT Directline) or thermosettingplastics (SMC Directline) to be composed individually and for specific products in orderto produce lightweight vehicle components. Dieffenbacher offers a fully automated turnkey production line for high-volume production in the high-pressure RTM processincluding PreformCenter.
Dieffenbacher GmbHMaschinen- und AnlagenbauHeilbronner Str. 20
75031 Eppingen, Germany
Tel.: +49 7262 65-277/ -335
Fax: +49 7262 65 297
E-Mail: [email protected]
Web: www.dieffenbacher.de
Halle / Stand 6/C10
“Die BRÜCKE“Feliciter Kiadó/ Feliciter Publishing Ltd.Nyár u. 7.
Nyiregyháza 4400, Hungary
Tel.: +36-30-399-8940
Fax: +36-42-504-930
E-Mail: [email protected]
Web: www.feliciter.hu
Halle / Stand 6/C30 Media Pavilion
81
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsDig - Dow
D
DowAksa is an international 50:50 joint venture between The Dow Chemical Company and Aksa Akrilik Kimya San AS. Combining the stregths of both partners, the joint ven-ture will manufacture and commercialize carbon fibers and derivatives with a specific focus on the energy, infrastructure and transportation markets.
DowAksa has an annual capacity of 3.500 tons with two Carbon Fiber production lines.
DOWAKSA ILERI KOMPOZIT MALZEMELER SAN. TIC. A.SMIRALAY SEFIK BEY SOKAK AKHAN NO:15
GUMUSSUYU 34437, Turkey
Tel.: 0090 212 251 45 00
Fax: 0090 212 251 45 07
E-Mail: [email protected]
Web: www.dowaksa.com
Halle / Stand 4/E25
DJK Europe provides the cutting solution for automotive, aerospace, electronics, che-mical pharmaceutical, and other industry by integrating our ultrasonic cutter into FA automation system or robot engineering technology.
Our main business fields and applications are as follows; - Automotive (Resin, Carbon Fiber, Prepreg, Rubber, Fabric) - Aircraft (Carbon Fiber, Prepreg)- Electrical (Resin, Film) - Chemical (Film, Fabric) - Wind Energy (Carbon Fiber, Prepreg) - Marine (Carbon Fiber, Prepreg)
We are looking forward to meeting you at the exhibition site!
DJK Europe GmbH
Mergenthalerallee 79-81
65760 Eschborn, Germany
Tel.: +49-(0)6196-776-1411
Fax: +49-(0)6196-776-1419
E-Mail: [email protected]
Web: www.djkeurope.com
Halle / Stand 6/G41
Der WIN-Verlag (www.win-verlag.de) steht für eine pragmatische und nutzenorientier-te Berichterstattung mit dem Anspruch, dem Leser tatsächlich weiterzuhelfen, indem er durch seine Verlagsangebote die Zusammenhänge und die Tragweite technikbegrün-deter Entscheidungen verständlich vermittelt.
Im WIN-Verlag erscheinen die Publikationen e-commerce magazin (www.e-com-merce-magazin.de), digitalbusiness (www.digital-business-magazin.de), AUTOCADMagazin (www.autocad-magazin.de), Inventor Magazin (www.inventor-magazin.de), DIGITAL ENGINEERING Magazin (www.digital-engineering-magazin.de), DIGITAL MANUFACTURING Magazin (www.digital-manufacturing-magazin.de) und VIRTUAL REALITY Magazin (www.virtual-reality-magazin.de) sowie mehrere Business PartnerKataloge. Der Verlag spricht mit seinen B2B-Publikationen die Zielgruppen Architekten, Konstrukteure, Organisatoren, Berater, IT-Spezialisten, Vorständen, Geschäftsführer und weitere Entscheidungsträger an.
“Digital Manufacturing“WIN-Verlag GmbH & Co.KGJohann-Sebastian-Bach-Str. 5
85591 Vaterstetten, Germany
Tel.: 0049 08106 350-0
Fax: 0049 08106 350-190
E-Mail: [email protected]
Web: www.win-verlag.de
Halle / Stand 6/C30 Media Pavilion
Der WIN-Verlag (www.win-verlag.de) steht für eine pragmatische und nutzenorientier-te Berichterstattung mit dem Anspruch, dem Leser tatsächlich weiterzuhelfen, indem er durch seine Verlagsangebote die Zusammenhänge und die Tragweite technikbegrün-deter Entscheidungen verständlich vermittelt.
Im WIN-Verlag erscheinen die Publikationen e-commerce magazin (www.e-com-merce-magazin.de), digitalbusiness (www.digital-business-magazin.de), AUTOCADMagazin (www.autocad-magazin.de), Inventor Magazin (www.inventor-magazin.de), DIGITAL ENGINEERING Magazin (www.digital-engineering-magazin.de), DIGITAL MANUFACTURING Magazin (www.digital-manufacturing-magazin.de) und VIRTUAL REALITY Magazin (www.virtual-reality-magazin.de) sowie mehrere Business PartnerKataloge. Der Verlag spricht mit seinen B2B-Publikationen die Zielgruppen Architekten, Konstrukteure, Organisatoren, Berater, IT-Spezialisten, Vorständen, Geschäftsführer und weitere Entscheidungsträger an.
“Digital Engineering“WIN-Verlag GmbH & Co.KGJohann-Sebastian-Bach-Str. 5
85591 Vaterstetten, Germany
Tel.: 0049 08106 350-0
Fax: 0049 08106 350-190
E-Mail: [email protected]
Web: www.win-verlag.de
Halle / Stand 6/C30 Media Pavilion
82
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsDow - Dut
D
Bau von Formwerkzeugen zur Verarbeitung von Kunststoffen und Verbundwerkstoffen DMM und CLM (2001 erworben) mit Sitz in Oyonnax in der Region Rhône-Alpes (zwischen Lyon und Genf) haben es verstanden, sich als unerlässliche Spezialisten in der Erforschung, Herstellung und Reparatur von Formwerkzeugen zur Verarbeitung von Kunststoffen und Verbundwerkstoffen zu entwickeln und durchzusetzen. Bau von Formen bis zu einem Gewicht von 50 t und 5 m Länge. Auffrischung vonFormen jeglicher Herkunft und verschiedenster Technologien Wir wirken an Ihren Projekten mit, sei es in Frankreich oder auf internationaler Ebene.
Unser Markenzeichen: Die Einhaltung unserer VerpflichtungenUnsere Stärken Wir bauen auf menschliche Werte: - Ein offenes Ohr für unsere Kunden - Flexibilität - Umgehende Reaktion auf Anfragen - Einhaltung unserer Verpflichtungen - Garantierte Lieferfristen Bewährtes Qualitätssystem: ISO 9001 - Version 2008.Web site : www.dmm.fr
DUTHEL MAINTENANCE MOULES
Parc Industriel la Prairie B.P. 62 - Bellignat
01116 Oyonnax cedex, France
Tel.: +33 (0)4 74 77 45 48
Fax: +33 (0)4 74 77 96 36
E-Mail: [email protected]
Web: www.dmm.fr
Halle / Stand 4/D20e
Dutch Thermoplastic Components is a moulding company specialized in advanced thermoplastic composites and with over 10 years of experience in press forming cont-inuous reinforced thermoplastics. DTC is today supplying thousands of structural parts for A350, B787 and several other new aircraft programms. With our moulding cycle of just minutes, we are also equipped for mass production applications outside aerospace. We mould all thermoplastic composites, from self reinforced PP and PE up to PEEK,PPS and PEKK based materials. Recent developments include press forming profiles up to 3 meter and forming of variable thickness parts (continuous reinforced). keywords: CFRTP - Press forming - 5axis CNC - C-scan - Welding
Dutch Thermoplastic Components
Bolderweg 2
1332AT Almere, The Netherlands
Tel.: +31 36 2000 123
Fax: +31 36 2000 130
E-Mail: [email protected]
Web: www.composites.nl
Halle / Stand 4/A38
KUNDENSPEZIFISCHE PRAEZISIONSTEILE UND MASSGESCHNEIDERTE DIENSTLEISTUN-GEN AUS EINER HAND: Präzisisionsteile aus faserverstärkten Kunststoffen mit Duro-plast- oder hochwertiger Thermoplast-Matrix, mit höchster Genauigkeit (0,02mm!)bearbeitet. Ausgangsmaterialien: Vollprofile bis Drm.50mm, Hohlprofile, Rohre, Platten Pressteile aus Eigenformulierung, Prepregs (alles aus eigener Firmen-Cluster-Produkti-on). Für Spezial-Anwendungen (z.B. Textilmaschinen) werden unterschiedliche Rohstoffe (CFK-Inox, CFK-Kupfer) verbunden. Dank Kunststoffbearbeitungs- und Spezial-Maschinen, Pressen usw. „unter einemDach“ lassen sich kompetente Lösungen realisieren: Messtaster aus unseren mit höchster Präzision bearbeiteten CFK-Schäften finden weltweit Anwendung. Hydraulik-Zylinder aus GFK oder CFK ersetzen schwere Stahlteile. CFK-PEEK setzt bei medizinischen Instrumenten neue Massstäbe. Unsere Gewindestangen aus GFK, CFKoder BFK mutieren Dank höchster Qualitätsstufe zu exklusiven Spezialteilen.
DURAtec AG
Hinterbergring 5 Postfach 132
6260 Reiden, Switzerland
Tel.: +41 62 758 49 49
Fax: +41 62 758 49 27
E-Mail: [email protected]
Web: www.duratec.ch
Halle / Stand 6/B24
Advanced composite solutions from Dow offer significant performance, efficient pro-cessability and cost advantages for the fabrication of strong, lightweight, and durablecomposites as used in construction, infrastructure, wind energy, and transportation. With the recent joint venture, Dow and DowAksa (stand 4/E25) combine resin and carbon fiber capabilities to provide a seamless offering to customers.
Dow’s VORAFORCE™ composite systems are tailored to help satisfy the demanding needs of different industries facing complex challenges. Epoxy-based systems from Dow exhibit exceptional thermo-mechanical properties and compatibility with carbon fiber reinforcement, while polyurethane-based systems demonstrate excellent tough-ness and fast curing.
The entire VORAFORCE range is characterized by low VOC emissions during production and are available for Filament Winding, Hand Lay-up, Infusion, Long Fiber Injection,Pultrusion, RRIM, RTM, Spray Preg, SRIM processes.
Dow Europe GmbHThe Dow Chemical CompanyBachtobelstr. 3
8810 Horgen, Switzerland
Tel.: 0039 0522 645 878
Fax: 0039 0522 645 726
E-Mail: [email protected]
Web: www.dow.com
Halle / Stand 4/D40c
83
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsDyn - Ebf
D
Ingenieurdienstleister und FuE-Dienstleister, Technologietransfer, Entwicklung von Sondermaschinen, Sonderfahrzeugbau, Entwicklung von Faser-Po-lymer-Verbunden und deren Anwendung, konstruktiver Leichtbau, Bauteilauslegung, Simulation und Berechnung, Entwicklung von Bauteilen aus textilen Flächengebilden,CFK- und GFK-Bauteile, Prüfdienstleistungen, Modellbau und Prototypenherstellung
EBF Dresden GmbHForschung, Entwicklung, ErprobungClara-Zetkin-Str. 31
01159 Dresden, Germany
Tel.: 0351 422 91 -10
Fax: 0351 422 91 -19
E-Mail: [email protected]
Web: www.ebf-dresden.de
Halle / Stand 4/D03
Wir bieten Ihnen ein durchgängiges Angebot an Spezialkunstharzen für Design, Modelle,Formenbau und Produktion:
- Allzweck- und Laminierharze- Platten- und Blockmaterialien- Epoxid- und PU-Auflegepasten- Oberflächenharze - Vakuuminfusionszubehör - Silikone
Unsere hochwertige Produktpalette findet unter anderem Verwendung in High Tech-Bereichen, wie Rennsport, Bootsbau, Automobilindustrie, Schienenfahrzeugbau,Windkraft und Luftfahrt.
Wir freuen uns auf Ihren Besuch an unserem Stand Nr. A 18 in Halle 4.
ebalta Kunststoff GmbH
Erlbacher Str. 100
91541 Rothenburg, Germany
Tel.: 098 61 7007 0
Fax: 098 61 7007 77
E-Mail: [email protected]
Web: www.ebalta.de
Halle / Stand 4/A18
The European Alliance for Thermoplastic Composites (EATC)was formed in 2000 by leading European companies, with a concerted commitment to the technological advancement of longfiber reinforced thermoplastics over thecomplete product chain:
All those involved in thermoplastic composites decided to cooperate closely with theobjective to increase the quantity of applications and to speed up new developments.The members of the European Alliance for Thermoplastic Composites (EATC) serves the industrie with innovative and economic components and systems, realized with long fiber reinforced thermoplastics. You are very welcome to join the EATC to give your input, contribute to our work and share our experience in the field of Thermoplastic Composites anytime! The EATC is an expert task force of the AVK (Federation of Reinforced Plastics).
EATC European Alliance for ThermoplasticComposites c/o AVK e.V.Am Hauptbahnhof 10
60329 Frankfurt am Main, Germany
Tel.: 069 27 1077 0
Fax: 069 27 1077 10
E-Mail: [email protected]
Web: www.eatc-online.org
Halle / Stand 4/A44
DYNA-MESS Prüfsysteme GmbH - flexibel, kompetent, persönlich - konzentriert sich auf die Entwicklung, Konzeption und Realisierung kundenspezifischer Prüfeinrichtun-gen für die dynamische Material- und Bauteilprüfung. Neben den Sondermaschinen verfügt DYNA-MESS über ein breites Spektrum von Standard Prüfmaschinen für konventionelle Prüfaufgaben. Service, Wartungen und Kalibrierungen runden das Leistungsangebot ab.
DYNA-MESS Prüfsysteme GmbH
Leimberg 19
52222 Aachen/Stolberg, Germany
Tel.: 02402 7668 10
Fax: 02402 7668 160
E-Mail: [email protected]
Web: www.dyna-mess.de
Halle / Stand 6/F43
E
84
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsEct - Elk
E
ELKOM ist ein hochspezialisiertes Unternehmen, das seit 1981 weltweit tätig ist. Wir entwickeln, produzieren und vermarkten Heizplatten, Kühlplatten, Heizstäbe, Va-kuum-Produktionsmaschinen mit Heiz- und Kühltechnik für die Compositeverarbeitungsowie Thermoformanlagen für Mineralkunststoffe und Thermoplaste. Unsere Spezialität sind kundenspezifische, energiesparende Systeme mit Heizung, Kühlung und sonstigen technischen Zusatzeinrichtungen nach Kundenwunsch. Unsere Heiz- und Kühlsysteme basieren auf patentierten ELKOM-Produkten wie z.B. der ÖKO-THERMPLATTE. Damit erreichen wir hohe Leistung mit optimaler Präzision und bieten
Ihnen erprobte, sichere, energiesparende und marktführende Technik.
ELKOM Heizplattentechnik GmbH
Oberbecksener Str. 80
32547 Bad Oeynhausen, Germany
Tel.: 0049 5731 7782 0
Fax: 0049 5731 7782 12
E-Mail: [email protected]
Web: www.elkom.de
Halle / Stand 6/E44
ELANTAS ITALIA Srl
Strada Antolini, 1
43044 Collecchio, Italy
Tel.: 0039 521 304711
Fax: 0039 521 804410
E-Mail: [email protected]
Web: www.elantas.com/italia
Halle / Stand 6/B01
Die Firma edevis ist Hersteller und Dienstleister im Bereich der zerstörungsfreienWerkstoffprüfung mit Thermografie, Fotothermik und Shearografie.
Unsere Mitarbeiter können auf eine Erfahrung von über 10 Jahren im Bereich der Prü-fung von faserverstärkten Kunststoffen zurückblicken.
Wir entwickeln und bauen innovative Thermografiesysteme vom flexiblen Laborgerätbis hin zum vollautomatisierten Serienprüfstand für den industriellen Einsatz... ...in der zerstörungsfreien Werkstoff- und Bauteilprüfung, ...in Qualitätssicherung und Prozesskontrolle, ...in Wartung und Instandhaltung.
Alle Anlagen werden auf Wunsch an die kundenspezifischen Problemstellungen ange-passt.Wir bieten flexible Dienstleistungsprüfung vor Ort an. Unsere qualifizierten Prüfer sind nach EN 473 Stufe 2 und EN 4179 Stufe 2 zertifiziert, und ermöglichen eine schnelle und effiziente Prüfabwicklung.
edevis GmbH
Handwerkstr. 55
70565 Stuttgart, Germany
Tel.: 0711 933077 20
Fax: 0711 933077 99
E-Mail: [email protected]
Web: www.edevis.com
Halle / Stand 6/E18
ECTA Handelsgesellschaft mbH mit Sitz in Berlin ist eines der führenden internati-onalen Handelshäuser mit einem umfangreichen Sortiment an Glasfasermaterialien für Duro- und Thermoplaste. Zum Kundenstamm zählen namhafte Unternehmen dereuropäischen Kunststoffindustrie aus den Branchen: Automobil, Elektro, Bauwesen,Compounding, Yacht- und Bootsbau, Windenergieanlagenbau.
ECTA verfügt über Läger in Deutschland und Polen, durch die eine „just-in-time“-Belie-ferung von Standardprodukten garantiert wird.
Neben wettbewerbsfähigen Preisen bietet ECTA einen exzellenten Service, Flexibilität,Beratung, technische Unterstützung, Weiterentwicklung und Innovation. Das Sortiment aus E-Glas, ECR-Glas und S-Glas umfasst: Roving, Matten, Gewebe, Gelege, Komplexe, Schnittglas (Kurz- und Langfasern), Glasmehl.Technische Kunststoffe, Standardkunststoffe, Regranulate, Masterbatches und Additiveergänzen das Portfolio.
Wir freuen uns auf Ihren Besuch an unserem Stand Nr. 4/D40.
ECTAHandelsgesellschaft GmbHAhornstr. 16
14163 Berlin, Germany
Tel.: 030 8099 39 0
Fax: 030 8099 39 11
E-Mail: [email protected]
Web: www.ecta-gmbh.de
Halle / Stand 4/D40a
85
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsElm - Ems
E
EM-Systeme GmbH
Feldstr. 21
46149 Oberhausen, Germany
Tel.: 0208 4090800
Fax: 0208 4090808
E-Mail: [email protected]
Web: www.em-systeme.de
Halle / Stand 6/A16
Seit über 85 Jahren steht FreiLacke für Kompetenz in der Entwicklung innovativer Farben und Lacke. Das Familienunternehmen aus dem Schwarzwald, in der dritten Generation geführt, setzt Qualitätsstandards, auf die man sich verlassen kann. Wir sind spezialisiert auf die unterschiedlichsten Branchen, Anwendungen, Herstellungsverfah-ren und Anforderungen.
Systemlack für beste Ergebnisse – auch im Produktmix FreiLacke ist weltweiter Spezialist für Systemlack und Systemlackkompetenz. BeideBegriffe wurden von dem Traditionsunternehmen aus Döggingen maßgeblich geprägt. FreiLacke entwickelt und produziert Pulverlacke, Industrielacke, Elektrotauchlacke & Durelastic - Oberflächenlösungen für Composites unter einem Dach. Damit können wir unseren Kunden nicht nur alle wichtigen Lacktechnologien anbieten, sondern diese auch hinsichtlich Beschichtungsaufbau und Optik optimal aufeinander abstimmen.
Emil Frei GmbH & Co. KG
Am Bahnhof 6
78199 Bräunlingen, Germany
Tel.: +49 7707 151-331
Fax: +49 7707 151-331
E-Mail: [email protected]
Web: www.freilacke.de
Halle / Stand 4/D26
ELOVIS GmbH ist mit Systemen zur berührungslosen Längen- und Geschwindigkeits-messung bekannt geworden. Inzwischen wurde die Produktpalette erweitert:
Berührungslose Längen- und Geschwindigkeitsmessung μSpeedDie materialunabhängigen Systeme messen Bahnwaren und Stückgüter mit einer Ge-nauigkeit von +/- 0,05 %. Die Systeme sind schlupffrei, wartungsfrei und dauerhaft kalibriert.
Berührungslose Stückgut-LängenmessungSLMDas Messsystem SLM dient der Überprüfung von Stückgütern im Durchlauf. Längen von 10 bis 4000 mm lassen sich mit Genauigkeiten von 1/10 bis 5/10 mm messen. SLM-Systeme sind wartungsfrei, oberflächenunabhängig und dauerhaft kalibriert.Drahtlose synchrone Datenerfassung und Datenübertragung TEDIASENS Das W-LAN basierte System ermöglicht die drahtlose, synchrone Datenaufnahmeund Signalübertragung von verteilten Sensoren. Haupteinsatzgebiet sind mobileMessanwendungen im Servicebereich, z. B. zur Maschinendiagnose (Vibrationsanalyse, Modalanalyse etc.)
ELOVIS GmbHLängen- und GeschwindigkeitsmesstechnikKarl-Friedrich-Straße 14-18
76133 Karlsruhe, Germany
Tel.: +49 (721) 933 823 0
Fax: +49 (721) 933 823 23
E-Mail: [email protected]
Web: www.elovis.de
Halle / Stand 4/F11
Seit 1981 ist ELMATEX zuverlässiger Vertriebspartner für weltweit führende Herstellervon Maschinen, Anlagen und Zubehör speziell für die Textil- und Nonwovens-Industrie. Die gesamte textile Herstellungskette durchläuft das ELMATEX-Programm wie einroter Faden - beginnend beim Labor über die Faseraufbereitung, Spulerei, Zwirnerei,Weberei, Nonwovens-Herstellung, Veredlung, Beschichtung, Laminierung, Kaschierung, Transferdruck, Umwelttechnik, Aufmachung, Transport- und Lagertechnik bis hin zur automatischen Warenschau, Online-Flächengewichtsmessung/-regelung und demERP-System.
ELMATEX ist ebenfalls für einen Teil der Hersteller in der Hygiene-, Chemie-, Folien-, Kunststoff-, Papier- und graphischen Industrie tätig. Darüber hinaus bietet ELMATEXmit seinen Partnern umfassende textilorientierte Beratung an.
Mit drei Standorten ist ELMATEX in Deutschland, Niederlande, Schweiz, Tschechien, Slowakei, Thailand, Vietnam und Myanmar präsent.
Elmatex GmbHElectronic und Maschinen für die IndustrieUerdinger Str. 149
47799 Krefeld, Germany
Tel.: 02151 36947 0
Fax: 02151 36947 29
E-Mail: [email protected]
Web: www.elmatex.de
Halle / Stand 4/F11
86
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsEms - Erg
E
Herstellung von Composite Werkzeugen.A. Erglis GmbH
Amsterdamer Straße 41
74081 Heilbronn, Germany
Tel.: +49 7131 58981-0
Fax: +49 7131 58981-11
E-Mail: [email protected]
Web: www.erglis.de
Halle / Stand 6/D04
ERBO bietet Ihnen zentrale Absauganlagen für:- 5-Achs-Fräsmaschinen mit Absaugvorrichtung direkt am Werkzeug- 3-Achs-Fräsmaschinen mit Absaugvorrichtung direkt am Werkzeug- Plattensägen- Dreh- und Fräsmaschinen- Stanzmaschinen- Endlose Stanzgitterabfälle - Randstreifen- Trockene uns nasse Späne- Großvolumige Späne
ERBO GmbH
Robert-Bosch-Str. 21
71106 Magstadt, Germany
Tel.: +49 7159 408 69 0
Fax: +49 7159 408 69 277
E-Mail: [email protected]
Web: www.erbo-gmbh.de
Halle / Stand 6/B27
Die European Pultrusion Technology Association (EPTA) wurde als Vereinigung 1989durch die führenden Pultrusions-Unternehmen Europas gegründet. Alle Firmen und Organisationen, die an der Förderung von Marketing-Aktivitäten für Verstärkte Kunst-stoffe, die durch das Pultrusionsverfahren hergestellt werden, interessiert sind, könnender EPTA beitreten.
The European Pultrusion Technology Association (EPTA) is an association formed in1989 by the leading FRC (Fiber Reinforced Composites) Pultruders in Europe and is open to all companies and organisations, wishing to participate in promoting the re-sponsible use of Fiber Reinforced Composites Materials, and in excange of knowledgebetween members.
EPTA European Pultrusion Technology Association c/o AVK e.V.Am Hauptbahnhof 10
60329 Frankfurt, Germany
Tel.: 069 271077 0
Fax: 069 271077 10
E-Mail: [email protected]
Web: www.pultruders.com
Halle / Stand 4/F43
EMSZ, the Association of the Manufactures of Reinforced Plastic Materials was born in 1992, as the representative national federation of main Hungarian composite manu-factures, developers, educational institutes, and suppliers. The goal of EMSZ keeping the exchange of informations, organizing educational trainings, supporting all kind of initiatives an Europian level, assisting further develop-ment of Composite Industry in Hungary. EMSZ is the host of traditional „BALATON CONFERENCE“, which becomes as important composite meeting in Middle East Europe.Next event: Reinforced Plastics 2014 - „International Balaton Conference“ to be held at Keszthely, Lake Balaton, Hungary, May 20-22, 2014.
EMSZ - Association ofthe Manufactures of Reinforced PlasticMaterialsGyar u. 2 Po Box 254
Budaörs 2041, Hungary
Tel.: 0036 7025 81035
Fax: 0036 23 445 524
E-Mail: [email protected]
Web: www.emsz-kompozit.hu
Halle / Stand 6/D39
87
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsEst - Eur
E
EC steht für “Excellence in Composites”.
Mit mehr als fünfundzwanzig Jahren Erfahrung ist die EC-Gruppe Ihr zuverlässigerPartner für das Design und die Produktion von anspruchsvollen Verbundwerkstoffen:Von der vollständigen Baugruppe über Fertigteile, verformte und flache Platten bis hinzur einfachen Wabenscheibe – We reinforce your ideas! Die Tage als EC nur für seine Waben bekannt war, sind lange vorbei. Heute steht die Wabe am Anfang unserer Produktkette und nicht mehr am Ende. Die EC-Gruppe von Heute ist ein moderner Komplettanbieter anspruchsvoller Lösungenaus Verbundwerkstoffen für eine vielzahl von Industrien. Besuchen Sie uns und finden Sie heraus, welche Vorteile wir Ihnen bieten können!
EURO-COMPOSITES S.A.
B.P. 24, Zone Industrielle
Echternach L-6401, Luxembourg
Tel.: 00352 72 94 63 1
Fax: 00352 72 94 60
E-Mail: [email protected]
Web: www.euro-composites.com
Halle / Stand 6/D32
EURAILmag keeps you up to speed on all the news and events in Europe’s railwaytransport industry. Developments in legislation, regulations and standards, the econo-mic situation, advanced technologies, innovative solutions, new trends and current is-sues… we deliver the information in the form of technical articles and with interviews with key players in the field. www.eurailmag.com
Mobility - The European Public Transport Magazine Mobility keeps you up to speed on all the news and events in Europe’s public transport industry. Developments in legislation, regulations and standards, the economic situa-tion, advanced technologies, innovative solutions, new trends and current issues… wedeliver the information in the form of technical articles and with interviews with keyplayers in the field.
“EURAILmag“Blu Line & Bro78 av. de la République
75011 Paris, France
Tel.: +33 140 21 08 68
E-Mail: [email protected]
Web: www.mobility-magazine.com
Halle / Stand 6/C30 Media Pavilion
EuCIAEuropean Composites Industry AssociationAvenue de Cortenbergh 71
1000 Brussels, Belgium
Tel.: 0032 (0) 2 792 27 525
Fax: 0032 (0) 2 675 39 35
E-Mail: [email protected]
Web: www.eucia.eu
Halle / Stand 4/D40e
Die Esterlössl GmbH gehört zu den Pionieren der Composite Technologie. Wir habenals erste das Vakuuminfusionsverfahren in Deutschland eingeführt. Vom Model oderder Form aus RAKUTOOL über HEXPLY Prepreg oder HEXPLY Gewebe mit den passendenHarzsystemen bis hin zu den Vakuumverbrauchsmaterialien von AIRTEC bieten wir un-seren Kunden abgestimmte Produkte für den kompletten Composite Herstellungprozess aus einer Hand.
Daneben bieten wir für den Modellbau die Rakutool Produkte der Firma Rampf an.
Esterlössl GmbH
Gutenbergstr. 2
71277 Rutesheim, Germany
Tel.: 07152 58724
Fax: 07152 59059
E-Mail: [email protected]
Web: www.esterloessl.de
Halle / Stand 4/A02, PDA_Foyer_5
88
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsEur - Evs
E
EVS is a leading global supplier of vision empowered process monitoring systemssince 1992. EVS systems, used for over two decades to significantly improve product quality and increase production efficiency, are to be found in hundreds of operational installations worldwide in a wide diversity of applications: woven, UD and multiaxialreinforcement fabrics, pre-pregs and laminates, fabrics for automotive and industrialapplications, apparel, home furnishing, non-woven materials, flooring, coated fabrics, denim, glass fabrics for printed circuit boards and plastic films. EVS has accumulated vast experience in collaborating with multi-national partners, EVS‘ systems implement cutting-edge computerized surface inspection technology while enabling its customers to effectively apply „cross-continent“ automatic inspection procedures & standards.
EVS - ELBIT VISION SYSTEMS LTD.
Bareket 7, Industrial Park Caesarea P.O. Box 3047
Caesarea 38900, Israel
Tel.: +972-4-610-7600
Fax: +972-4-610-7626
E-Mail: [email protected]
Web: www.evs.co.il
Halle / Stand 4/F11
Evonik Industries is one of the leading specialty chemicals companies worldwide. Theysupply the structural foam ROHACELL® for composites, polymers for thermoplastic matrices, and various additives. ROHACELL®, a core material for sandwich constructions, produces molded parts thatare light, extremely rigid, and highly durable. The most recent development, ROHA-CELL® HERO, was developed with excellent fracture toughness for complex structural applications in the aircraft industry. VESTAKEEP® PEEK and VESTAMID® Polyamide 12 and Polyphthalamide are used as matrices for fiber composites with high mechanical strength and excellent chemicalresistance made from unidirectional fiber layers or textiles made from glass, carbon oraramid fibers. NANOPOX®, a concentrate of SiO2 nanoparticles in epoxy resin, optimizes the mecha-nical properties and the fatigue behavior of fiber composites.
Evonik Industries AG
Rellinghauser Straße 1-11
45128 Essen, Germany
Tel.: 06151 18 01
Fax: 06151 18 02
E-Mail: [email protected]
Web: www.rohacell.de
Halle / Stand 4/B16
Der Arbeitskreis „Euro-RTM-Group“ wurde von den Mitgliedern der AVK – Industriever-einigung Verstärkte Kunststoffe e.V. gegründet, die das RTM-Verfahren (Resin Transfer Moulding) als eine Verarbeitungstechnik der Zukunft für die Produktion von Teilen ausglasfaserverstärktem Kunststoff (GFK) sehen. Neben GFK-Produzenten befinden sich unter den Teilnehmern auch Rohstoffzulieferanten und Forschungsinstitute.
Ziel des Arbeitskreises ist es, den Bekanntheitsgrad und auch das Wissen um die vielfältigen Möglichkeiten der RTM-Technik bei der Produktion von Formteilen, in der GFK-Branche zu steigern. Wenn Sie Interesse an RTM-Technologie haben oder weitere Informationen wünschen, ist die Euro-RTM-Group Ihr Ansprechpartner.
Weitere Informationen unter http://www.euro-rtm-group.de/ oder bei der AVK – Indus-trievereinigung Verstärkte Kunststoffe e.V., www.avk-tv.de
Euro-RTM-Groupc/o AVK e.V.Am Hauptbahnhof 10
60329 Frankfurt am Main, Germany
Tel.: 069 27 10 77 0
Fax: 069 27 10 77 10
E-Mail: [email protected]
Web: www.euro-rtm-group.de
Halle / Stand 4/PDA_B
Das Unternehmen Europea d.o.o. hat eine über 30-jährige Tradition in der Herstellung von ungesättigten Polyester- und Vinylesterharzen sowie Gelcoats und Farbpasten. Wir verfügen über eine eigene Produktion von Erzeugnissen aus glasverstärktem Kunst-stoff (GFK), die sowohl aus eigener Entwicklung, als auch nach Kundenzeichnungen hergestellt werden. Bei der Herstellung werden Wickelverfahren (bis 4m Durchmesser), Vakuuminjektion und Handlaminierung angewandt.
Europea D.o.o.
Nazorjeva 3
Kranj 4000, Slovenia
Tel.: 00386 42365 740
Fax: 00386 42365 741
E-Mail: [email protected]
Web: www.europea.si
Halle / Stand 4/E32
89
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsExa - Far
F
FARRL GmbH
Kapitän-Strasser-Str. 18
63263 Neu-Isenburg, Germany
Tel.: +49 69 40766744
Fax: +49 69 40766753
E-Mail: [email protected]
Web: www.farrl.de
Halle / Stand 4/F41
Das „Fachmagazin für die Polyurethanindustrie“ (kurz: FAPU) wird vom KP Verlag herausgegeben.Der KP Verlag ist ein kleiner unabhängiger Fachverlag, der sich voll undganz den Themen Polyurethan und Polyurea.
Unter dem Logo FAPU erscheint unsere Zeitschrift in Deutsch (Fachmagazin für die Polyurethanindustrie), Englisch (European Polyurethane Journal) und Russisch (in Formeines Newsletters).
Mit über 20 Jahren Vertriebserfahrung in der Polyurethanindustrie verfügen wir über einige Kenntnisse und Kontakte zu allen PUR-Märkten in Europa und den NAFTA-Län-dern. Dies unterscheidet uns grundlegend von anderen Verlagen und Publikationen, für die Polyurethan teilweise nur ein Werkstoff neben vielen anderen Kunststoffen ist.
Früher selbst davon betroffen, unzählige Zeitschriften durchforsten zu müssen, um auf PUR-relevante Themen zu stoßen, haben wir vor über 10 Jahren begonnen das erstedeutschsprachige Fachmagazin für Polyurethane (FAPU) zu publizieren.
“FAPU - Fachmagazin für diePolyurethanindustrie“KP VerlagChristine-Teusch-Str. 34
22846 Norderstedt, Germany
Tel.: +49 40 432 71778
Fax: +49 40 432 71779
E-Mail: [email protected]
Web: www.fapu.de
Halle / Stand 6/C30 Media Pavilion
Exel Composites is a technology company which designs and manufactures compositeprofiles and tubes for various industrial applications. Exel concentrates on demanding,customer-tailored composite solutions that are always designed in close co-operationwith the customer, according to customer needs. Exel provides solutions e.g. for energy industry, electrical industry, building, construction and infrastructure and machine in-dustry, among many others. In machine industry an increasing number of applications is benefiting from lightweight, strong, stiff and high-precision composites. Composite materials are also an ideal choice in applications where increased energy efficiency is required, e.g. in windows & doors and transportation markets. Exel Composites utilizescontinuous manufacturing technologies: pultrusion, pullwinding and continuouslamination.
Exel Composites Plc
Muovilaaksontie 2
Heinävaara 82110, Finland
Tel.: 00358 20 7541 200
Fax: 00358 20 7541 330
E-Mail: [email protected]
Web: www.exelcomposites.com
Halle / Stand 6/A32
EASYPREG neuartiger, thermoplastischer, einlagiger Faserverbund von der Rolle aus Glasgewebe, Carbongewebe, Aramidgewebe sowie Gelegen. Zur Verarbeitung in Ther-moformmaschinen. VACUPRESS Vakuum-Tiefziehmaschinen, HEKAPUR Hartschäume,HEKAPUR Weichschäume und HEKAPUR Schnellgießharze für den Formen- und Modell-bau, THM-thermoplastische Modelliermassen für Wasserbad oder andere Wärmequel-len, wiederverwendbar.
Exact Plastics GmbH
Genossenschaftsstr. 12
29356 Bröckel, Germany
Tel.: +49 (0) 5144 4955648
Fax: +49 (0) 5144 4955649
E-Mail: [email protected]
Web: www.exact-plastics.de
Halle / Stand 6/F24
E
90
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsFib - Fir
F
First COMPOSITES GmbH
Die First COMPOSITES GmbH (1C) stellt, auf der Composites Messe den von Ihre entwi-ckelten RTM-ROBOT aus.
Der RTM-ROBOT wurde speziell entwickelt für die Herstellung von Integralbauteilen im RTM-Verfahren. Der Vorteil des RTM-ROBOT im Vergleich zu anderen Anlagen ist, dass sich komplexe Bauteilgeometrien mit unterschiedlichsten Materialien, imOne-Shot-Verfahren, mit hervorragenden Oberflächen, produzieren lassen. Es werden so vielseitig geforderte Bauteileigenschaften einfach und schnell umgesetzt. Arbeits-schritte mit aufwendiger Nacharbeit durch Fügen und Verkleben mehrerer Einzelkom-ponenten entfallen. Dies verringert die Fehlerhäufigkeit im Herstellprozess und erhöht andererseits die Festigkeit an den sonst üblichen Bauteilschnittstellen einer Baugruppe signifikant.
First COMPOSITES GmbH
Industriestraße 4
56589 Niederbreitbach, Germany
Tel.: 02638 948 342
Fax: 02638 948 343
E-Mail: [email protected]
Web: www.firstcomposites.de
Halle / Stand 6/B31
TECHNOLOGIE AUS EINER HAND. Fill ist ein international führendes Maschinen- und Anlagenbau-Familienunternehmen. In den Bereichen Polyurethan und Composites bieten wir unseren Kunden umfassendes Know-how, von der Konzeption über die Pro-duktion, die Montage, den Service bis hin zur automatisierten Datenanalyse. Bei uns erhalten Sie 100 % Kompetenz aus einer Hand. Fill your future.
TECHNOLOGY FROM A SINGLE SOURCE. Fill is a leading international machine and plant manufacturing company and is family-owned. In the fields of polyurethane and composites, we offer our customers comprehensive know-how extending from concept design to the production, its assembly and servicing, and on to automated data analy-sis. We provide you with 100% competency from a single source. Fill your future
Fill Gesellschaft m.b.H.
Fillstraße 1
4942 Gurten, Austria
Tel.: 0043 7757 7010 0
Fax: 0043 7757 7010 275
E-Mail: [email protected]
Web: www.fill.co.at
Halle / Stand 6/C06
fibretech composites GmbH
Am Lesumdeich 2
28719 Bremen, Germany
Tel.: 0421-30 38 519
Fax: 0421-38 01 975
E-Mail: no: [email protected]
Web: www.fibretech-composites.de
Halle / Stand 6/B23
Das Kernbusiness der 2003 gegründeten Firma Fiber Engineering liegt in der von ihrentwickelten und in über 30 Ländern patentierten Fasereinblastechnologie FIM zur Herstellung von 3D Faserformteilen. Mit FIM ist es möglich, Kontur genaue Formteile mit gezielt unterschiedlicher Dichtevollautomatisch zu günstigen Kosten herzustellen. Neben fast allen bekannten Stapel-fasern können sehr viele Recyclingprodukte thermoplastisch wie auch duroplastischmit dem System gebunden werden.Angeboten wird die gesamte Prozesskette zur Einblastechnik wiedie Entwicklung, Prototypenfertigung, Serienfertigung von 3D Faserformteilen.Außerdem erfolgt Kunden spezifisch die Herstellung von Werkzeugen, Technikums- undSerienanlagen zur Fertigung von Faserformteilen. Das Verfahren FIM wurde 2013 mit dem Umwelttechnikpreis im Bereich Materialeffizi-enz durch das Umweltministerium BW ausgezeichnet.
Fiber Engineering GmbH
Schoemperlenstr. 11 c-d
76185 Karlsruhe, Germany
Tel.: 0721 5696 757
Fax: 0721 5696 928
E-Mail: [email protected]
Web: www.fiber-engineering.de
Halle / Stand 4/C02
91
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsFlu - For
F
Unter dem Dach des Gemeinschaftsstandes „Forschung für die Zukunft“ präsentieren sich die Technische Universität Dresden, Friedrich-Schiller-Universität Jena, Technische Universität Ilmenau, Hochschule Magdeburg, Hochschule Merseburg und die Universi-tät Rostock mit innovativen und anwendungsorientierten Forschungsergebnissen.
Forschung für die Zukunftc/o Martin-Luther-Universität HalleUniversitätsplatz 9
06099 Halle, Germany
Tel.: 0345 5521379
Fax: 0345 5527404
E-Mail: [email protected]
Web: www.forschung-fuer-die-zukunft.de
Halle / Stand 4/C22
FORMAX
Cutters Close Unit 3
Narborough Leicester LE19 2FZ, United Kingdom
Tel.: 0044 1162752200
Fax: 0044 1162841912
E-Mail: [email protected]
Web: www.formax.co.uk
Halle / Stand 4/E02
Unsere Kernkompetenz liegt in der Entwicklung von Konzepten, die effizientes undkostenorientiertes Arbeiten möglich machen. Ob durch hochkomplexe Systemlösungenoder durch die Integration von Standardteilen in individuelle Anlagen – unser professi-onelles Spezialistenteam erarbeitet optimale kundenspezifische Komplettlösungen. Neben Entwicklung und Realisierung hochwertiger Anlagen für die Oberflächentechnik vertreibt FS eine breite Palette hochwertiger Spitzenprodukte dieser Branche.
Seit einigen Jahren zählen ebenfalls 2K-Heißspritzanlagen zur Verarbeitung von Polyu-rea, Polyurethan und PUR-Schaum zu unserem Kerngeschäft.In diesem Bereich konnten europaweit Firmen als Kunden gewonnen werden. UnsereKunden sind in den Bereichen der Schwimmbadbeschichtung, Klärbeckensanierung,Biogasanlagen, Werftindustrie, Automobilindustrie, Kanalsanierung, Flachdachsanie-rung, Pipelinebau und Dekoration tätig. Ein weiterer Bereich ist die Verarbeitung von PUR-Schaum zur Wärme-/Kältedämmung.
FluidSystems GmbH & Co. KG
Schallbruch 27
42781 Haan, Germany
Tel.: 02129 349 0
Fax: 02129 349 100
E-Mail: [email protected]
Web: www.fluidsystems.de
Halle / Stand 4/A37
FLUGZEUG-UNION SÜD GMBH ALS VAP®-NETZWERKPARTNER
Seit über 40 Jahren hat sich die FUS u.a. als leistungsstarker Zulieferer für Vakuum-hilfs-materialien bewährt. Aufgrund ihres nachgewiesenen Erfahrungshintergrundeswurde die FUS, als 100% -iges Tochterunternehmen der EADS, die gleichzeitig Paten-tinhaber der VAP®-Technologie (Vacuum Assisted Process) ist, nun als weiterer Partner in das VAP-Netzwerk aufgenommen.
Speziell für den VAP-Fertigungsprozess, bietet die FUS ein komplettes und qualifizier-tes Sortiment an VAP-geprüften Vakuumhilfsmaterialien und Ausrüstungskomponen-ten. Dadurch wird für den Anwender die Prozesssicherheit weiter erhöht und er kann alle Vorteile des VAP-Prozesses vollständig nutzen.
Flugzeug-Union Süd GmbHEADS DeutschlandRudolf-Diesel Str. 26
85521 Ottobrunn/Riemerling, Germany
Tel.: 089 607 24195
Fax: 089 607 25362
E-Mail: [email protected]
Web: www.fus.de
Halle / Stand 4/B12
92
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsFor - Fra
F
Fraunhofer Institut für Fertigungstechnik und Angewandte Materialforschung IFAMWiener Str. 12
28359 Bremen, Germany
Tel.: 0421 2246 400
Fax: 0421 2246 430
E-Mail: [email protected]
Web: www.ifam.fraunhofer.de
Halle / Stand 6/A02
Die Wissenschaftler des Fraunhofer-Instituts für Chemische Technologie ICT forschenund entwickeln in den Kernkompetenzen Energetische Materialien, Energetische Syste-me, Angewandte Elektrochemie, Umwelt Engineering und Polymer Engineering.
Die dadurch gewonnenen Erkenntnisse und Entwicklungen finden in vier Geschäftsfel-dern Anwendung: Verteidigung und Sicherheit, Luft- und Raumfahrt, Automobil und Verkehr, Chemie und Pharmazie sowie Energie und Umwelt.
Entwicklungen werden ausgehend von der Idee über Grundlagenforschung bis hin zuanwendungsorientierter Forschung und Umsetzung von kundenspezifischen, vorserien-reifen Anwendungen begleitet. Die Expertise des ICT ist in den Bereichen Konzeption, Auslegung, Produktentwicklung, Verarbeitungstechnik, Materialentwicklung und –cha-rakterisierung sowie der Qualitätssicherung.
Fraunhofer Institut für ChemischeTechnologie (ICT)Joseph-von-Fraunhofer-Str. 7
76327 Pfinztal (Berghausen), Germany
Tel.: 0721 4640 0
Fax: 0721 4640 111
E-Mail: [email protected]
Web: www.ict.fraunhofer.de
Halle / Stand 6/A02
Forschen für die Praxis ist die zentrale Aufgabe der Fraunhofer-Gesellschaft. Die 1949gegründete Forschungsorganisation betreibt anwendungsorientierte Forschung zumNutzen der Wirtschaft und zum Vorteil der Gesellschaft. Vertragspartner und Auftrag-geber sind Industrie- und Dienstleistungsunternehmen sowie die öffentliche Hand.
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V.Hansastr. 27 c
80686 München, Germany
Tel.: 089 12 05 0
Fax: 089 12 05 7531
E-Mail: [email protected]
Web: www.fraunhofer.de
Halle / Stand 6/A02
Das „BasaltFaserNetzwerk“ ist ein Verbund aus 21 Unternehmen und 3 Forschungs-einrichtungen, der sich der Entwicklung und Vermarktung von Produkten undDienstleistungen rund um Basaltfasern verschrieben hat. Basaltfasern sind minerali-sche Hochleistungsfasern, die in einem Schmelzspinnverfahren erzeugt werden undeinzigartige mechanische, thermische und chemische Eigenschaften aufweisen. Ohnedie Verwendung von chemischen Zusätzen hergestellt, sind sie inert, nicht toxisch, UV-beständig und ein reines Naturprodukt. Anwendungsbereiche sind technische Textilien sowie duro- und thermoplastische Verbundwerkstoffe für die Bauindustrie,den Maschinen- und Anlagenbau, die Automobilbranche, Geotextilien und viele andereBereiche. Basaltfasern haben das Potenzial, etablierte Fasertypen wie Glas- und Car-bonfasern in spezifischen Segmenten zu ergänzen und zu substituieren.
Forum Technologie und Wirtschaft e.V.BasaltFaserNetzwerkMeixstr. 5
01326 Dresden, Germany
Tel.: 0351-41373726
Fax: 0351-41373728
E-Mail: [email protected]
Web: www.combafi.de; www.texsalt.net
Halle / Stand 4/D03
93
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsFra - Fra
F
The customers of Fraunhofer IWM benefit from increased reliability, safety, durabilityand functionality of technical components and systems, higher quality and production yield, improved usage of material and energy and so reach cost effectiveness and costsavings.
Fraunhofer IWM provides solutions that define material and component properties that optimize their response to stresses and strains when in use and that make thegreatest possible use of their potential. Therefore the behaviour of materials to tech-nology or service induced mechanical, thermal, chemical or electrical loads is analyzed.Mechanisms in materials on the atomic, microscopic or macroscopic scale are investi-gated and simulated.
Fraunhofer IWM identifies component weaknesses and defects and their causes in order to avoid them in future and modifies the properties of materials and components to best suit the conditions under which they are used.
Fraunhofer-Institut fürWerkstoffmechanik IWMWöhlerstr. 11
79108 Freiburg, Germany
Tel.: 0761 5142 0
Fax: 0761 5142 110
E-Mail: [email protected]
Web: www.iwm.fraunhofer.de
Halle / Stand 6/A02
Fraunhofer ITWM will present its competences in the prediction of effective macros-copic properties, 3D-image analysis for geometric characterization and modelling and optical surface inspection for quality assurance applied to composite materials. Apart from exhibiting demonstrators at the booth, there will be daily live demonstrations of X-ray computed tomographies of composite specimens using CTportable (in cooperati-on with Fraunhofer EZRT), image analysis and computation of macroscopic mechanical material. Stop by our stand for an exact schedule. Using this tool chain, the microstructure of a composite can be characterized, which accounts strongly for its properties like thermal conductivity, stiffness, strength, oracoustic absorption. Image analysis can provide micro-structure information needed asinput for dimensioning at the macroscale, i.e. at the level of the whole part.
Fraunhofer Institut für Techno- undWirtschaftsmathematik ITWMFraunhofer Platz 1
67663 Kaiserslautern, Germany
Tel.: 0631 316004396
Fax: 0631 316001099
E-Mail: [email protected]
Web: www.itwm.fhg.de
Halle / Stand 6/A02
Fraunhofer EZRT and WKI develop procedures and systems for non-destructive testing of composite materials using X-ray, thermography and ultrasound.Our services range from feasibility studies for determining material characteristics tothe implementation of user-specific 2-D or 3-D inline testing systems. Special focus is put on detection and quantitative evaluation of all kinds of defects, differentiation and visualization of material and density distributions, surface extraction of complex parts for dimensional measurement and material characterization. We present results of a joint project on mobile NDT for rotor blades of wind energyturbines. The hierarchic concept is to begin with the complete scan of the blade surface with active infrared thermography. The defects located by thermography arecloser inspected by X-ray computed tomography which can provide high resolution information - e.g. for porosities, fiber orientation or ondulations.
Fraunhofer Entwicklungszentrum Röntgentechnik EZRTDr.- Mack- Str. 81
90762 Fürth, Germany
Tel.: 0911580617540
Fax: 0911580617599
E-Mail: [email protected]
Web: www.iis.fraunhofer.de
Halle / Stand 4/B04
Fraunhofer-Institut für Betriebsfestigkeitund Systemzuverlässigkeit LBFBartningstr. 47
64289 Darmstadt, Germany
Tel.: 06151 705 0
Fax: 06151 705 214
E-Mail: [email protected]
Web: www.lbf.fraunhofer.de
Halle / Stand 6/A02
94
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsFra - Fra
F
Das Fraunhofer IWS Dresden betreibt anwendungsorientierte Forschung und Entwick-lung in den Bereichen Laser- und Oberflächentechnologie. Die Schwerpunkte sind dabei das Laserschweißen,-schneiden, -beschichten, -härten und Laserreinigen, die Oberflächen- und Dünnschichttechnik, Gasphasenprozesse, das Prozessmonitoring sowie die Nanopartikeltechnologie.
Fraunhofer-Institut für Werkstoff- und Strahltechnik IWSWinterbergstraße 28
01277 Dresden, Germany
Tel.: +49 351 83391-3235
Fax: +49 351 83391-3300
E-Mail: [email protected]
Web: www.iws.fraunhofer.de
Halle / Stand 4/B04
Das Fraunhofer IPT vereint langjähriges Wissen und Erfahrung aus allen Gebieten der Produktionstechnik. In den Bereichen Prozesstechnologie, Produktionsmaschinen, Me-chatronik, Produktionsqualität und Messtechnik sowie Technologiemanagement bieten wir unseren Kunden und Projektpartnern angewandte Forschung und Entwicklung mit unmittelbar umsetzbaren Ergebnissen. Dabei begreifen wir die Produktion nicht nur in ihren einzelnen Schritten, sondern betrachten bei unserer Arbeit die Gesamtheit ihrer Prozesse und die Verbindungen zwischen den jeweiligen Gliedern der Prozesskette– von der Vor- und Produktentwicklung über die Produktionsvorbereitung und die Fertigung bis zur Montage. Das Ziel des Geschäftsfelds »Leichtbau-Produktionstechnik« ist es, die Großserienferti-gung im Leichtbau zu ermöglichen und damit effiziente, umweltschonendere Produktebezahlbar zu machen. Zu diesem Zweck entwickeln und planen wir innovative Ferti-gungssysteme und Technologien für den industriellen Einsatz.
Fraunhofer-Institut fürProduktionstechnologie IPTSteinbachstraße 17
52074 Aachen, Germany
Tel.: +49 241 8904 100
Fax: +49 241 8904 198
E-Mail: [email protected]
Web: www.ipt.fraunhofer.de
Halle / Stand 6/A02
Die Fraunhofer-Projektgruppe Prozessinnovation bündelt Know-how im Bereich der Produkt- und Prozessentwicklung von Faserverbundwerkstoffen. Wir unterstützen produzierende CFK-Unternehmen bei Herausforderungen in den Bereichen Fabrikpla-nung, Betriebs- und Lastdatenermittlung, CFK-Strukturoptimierung, Entwicklung von Formenwerkzeugen, Prüfstandsbau, Prototypenentwicklung und der Instandsetzung von CFK-Produkten. Das Spektrum der Dienstleistungen erstreckt sich von der Optimierung Ihrer beste-henden Produktionsstätten und der individualisierten Planung neuer Werke über die Entwicklung Ihrer innovativen Idee bis zur Herstellung eines marktgerechten Serien-produkts aus CFK. Als erfahrener Partner helfen wir Ihnen mit einem strukturierten Vorgehen, die Vorteile des Leichtbauwerkstoffes optimal auszuschöpfen und diezukünftige Wettbewerbsfähigkeit Ihres Unternehmens zu stärken.
Fraunhofer IPAProjektgruppe ProzessinnovationUniversitätsstraße 30
95447 Bayreuth, Germany
Tel.: 0921 557 301
Fax: 0921 557 305
E-Mail: [email protected]
Web: www.lup.uni-bayreuth.de/fhg
Halle / Stand 6/B04
Das Fraunhofer IZFP, sowohl Forschungsstätte als auch Partner der Industrie, befasstsich mit den physikalischen Methoden der zerstörungsfreien Prüfung, der Charakteri-sierung von Werkstoffen, mit der Kontrolle und Überwachung von Fertigungsprozessenund Anlagenkomponenten und mit der Zustandsbestimmung bestehender Infrastruktur. Dies erstreckt sich über mehrere Größenordnungen, die gleichermaßen Berge, Brücken oder Atome abdecken.
Auftraggeber sind Industrie, Dienstleistungsunternehmen und öffentliche Einrichtun-gen.
In der Industrie werden unsere Arbeitsergebnisse überall dort eingesetzt, wo sicher-heitstechnische Aussagen und Qualitätsnachweise gefordert sind. Unsere methodischeKompetenz umfasst die physikalischen Verfahrensgrundlagen, Sensorik, Gerätebau,Handhabungstechniken, Techniken zur Ergebnisbewertung und Dokumentation sowiedie Qualifizierung und Validierung neuer Prüfanwendungen und Prüfgeräte einschließ-lich Gerätewartung, Schulung und Prüfdienstleistungen.
Fraunhofer-Institut für ZerstörungsfreiePrüfverfahren IZFPCampus E3 1
66123 Saarbrücken, Germany
Tel.: 0049 681 9302 0
Fax: 0049 681 9302 5
E-Mail: [email protected]
Web: www.izfp.fraunhofer.de
Halle / Stand 6/A02
95
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsFri - Gan
G
The Angeloni firm was founded in 1927 by Mr. Mario as paint products commercial firm. Over the years,it has developed new sectors trying always to be in the vanguard of research and distribution of new products. Now we are one of the leading firmsin the advanced composites materials sector thanks to our large experience gainedin over 25 years of presence on this market. G.Angeloni is certified UNI EN ISO9001:2000. To solve your problems or to develop your project,you can count on G.An-geloni‘s technical staff.G.Angeloni stock lets us deliver your order in a very short time .
G. Angeloni Srl
Via Tommaso Abbate, 72/A
30020 Quarto d‘Altino, Italy
Tel.: 0039 0422 780580
Fax: 0039 0422 782782
E-Mail: [email protected]
Web: www.g-angeloni.com
Halle / Stand 4/C08
Seit 1948 begleiten wir mit GAK Gummi Fasern Kunststoffe die Kautschuk und Kunststoff verarbeitende Industrie sowie deren Maschinen- und Rohstofflieferantenmonatlich mit allen relevanten wissenschaftlichen, technischen und wirtschaftlichen Informationen. Das bedeutet: ca. 12 000 Fachleute - weltweit - lesen GAK.
Mit dem PU Magazin haben wir eine neue Zeitschrift im Verlagsprogramm, die sichseit ihrer Markteinführung im Oktober 2001 in Deutschland und den europäischen Nachbarländern als das neue Informationsforum der Polyurethan-Branche etablieren konnte.
“GAK - Gummi Fasern Kunststoffe“Dr. Gupta VerlagAm Stadion 3b
40878 Ratingen, Germany
Tel.: +49 2102 9345 0
Fax: +49 2102 9345 20
E-Mail: [email protected]
Web: www.gupta-verlag.de
Halle / Stand 6/C30 Media Pavilion
FutureCarbon ist spezialisiert auf die Herstellung von Kohlenstoffmaterialien und ihreVeredelung zu sogenannten „Carbon-Super-Kompositen“ als Vorprodukte für die wei-terverarbeitende Industrie sowie als Produkte für den industriellen Endverbraucher.FutureCarbon wird insbesondere Produkte der Carbo e-Therm Familie und Anwen-dungsbeispiele aus der Praxis präsentieren. Carbo e-Therm ist eine hocheffiziente,elektrisch leitfähige Heizbeschichtung für den Betrieb mit gefahrloser Kleinspannung. Dank einfachster Applikation auf unterschiedlichsten Formen und Oberflächen sowie der möglichen hohen Heizleistungen ergeben sich vielfältigste Anwendungsmöglich-keiten im Formenbau sowie Automotivebereich, beispielsweise für die Beheizung vonInnenraumverkleidungen, Lenkrädern, Armstützen, Dachhimmel.
FutureCarbon GmbH
Gottlieb-Keim-Str. 60
95448 Bayreuth, Germany
Tel.: +49 921 507 388 0
Fax: +49 921 507 388 99
E-Mail: [email protected]
Web: www.future-carbon.de
Halle / Stand 4/F42
FRIMO. Your global Technology Partner.
FRIMO is the specialist for the development and manufacture of systems for theproduction of high class plastic components for different application areas. We offer an extraordinary spectrum of technologies and services and attend you in every single process step. Irrespective of your decision for high quality tools, high performance single machines or fully automated production lines - we will always provide you withan individually optimized solution. Worldwide!
FRIMO has many years of extensive experience in developing and manufacturing plantsand tools to process composite materials such as CFK, GFK, NFPP, HFPP, LFT, GMT and BMC and supplies tailor-made manufacturing equipment for production processes likeRRIM, SRIM/GMPU, Long Fiber Technologies, NFI, or RTM.
FRIMO Group GmbH
Hansaring 1
49504 Lotte, Germany
Tel.: 05404 886 0
Fax: 05404 886 333
E-Mail: [email protected]
Web: www.frimo.com
Halle / Stand 6/E11, PDA_Foyer_6 F
96
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsGau - Gus
G
Gustav Gerster GmbH & Co. KGGeschäftsbereich Gerster TechTexMemminger Str. 18
88400 Biberach/Riss, Germany
Tel.: 07351 586 191
Fax: 07351 586 414
E-Mail: [email protected]
Web: www.gerster-techtex.com
Halle / Stand 4/D05
Germa Composite entwickelt und fertigt anspruchsvolle CFK Komponenten im Prepreg Autoklav Verfahren. Der gesamte Prozess wird übernommen - von der Planung, über die Konstruktion, 5 achsige Modell und Werkzeugerstellung, Prototypen-bau bis hin zur Vorserie oder Serienproduktion.
Produktbeispiele: CFK Strukturelemente, CFK Chrashelemente, CFK Bodyworks, CFK Sichtbauteile, CFK Monocoque
Hauptbranchen:Automotiv OEM, Rennsport F1 LMP1 DTM, Maschinenbau, Medizintechnik, Design, Sportgeräte
Qualitätszertifikate: ISO 9001, ISO 14001
www.germa-composite.de
Germa Composite GmbH
Donatusstr. 155
50259 Pulheim, Germany
Tel.: +49 2234/99151-0
Fax: +49 2234/99151-29
E-Mail: [email protected]
Web: www.germa-composite.de
Halle / Stand 6/C40
Die GEISS AG, 1948 gegündet, ist ein mittelständisches, inhabergeführtes Maschinen-bauunternehmen aus dem oberfränkischen Seßlach.
1957 wurde die erste Thermoformmaschine entwickelt und gebaut. Seitdem bietet die GEISS AG als weltweit einziger Spezialist Komplettlösungen nicht nur für die Kunststoffverarbeitung an. Das Leistungsspektrum umfasst Konstruktion und Bau von Thermoformmaschinen, CNC-Bearbeitungszentren sowie den Modell- und Werkzeug-bau. Diese Anlagen ausgrüstet mit spezeillen Optionen (u.a. hohe Schließkräfte oderÜberdrücke beim Verformen, Laserschneiden) eignen sich auch hervorragend für die Ver- und Bearbeitung von Compositen.
Der internationale Erfolg der GEISS AG gründet auf den klassischen Stärken des deut-schen Mittelstandes: Innovationsstärke, Spitzenqualität und -technik, konsequenteKundenorientierung und absolute Zuverlässigkeit!
Eine Vielzahl technologischer Entwicklungen und Patente untermauern das Motto der GEISS AG „one step ahead“.
GEISS AG
Industriestraße 2
96145 Sesslach, Germany
Tel.: +49 9569 9221 0
Fax: +49 9569 9221 20
E-Mail: [email protected]
Web: www.geiss-ttt.com
Halle / Stand 6/A03
Seit 1983 ist die Gaugler & Lutz oHG mit Sitz in Aalen-Ebnat aufgrund nachhaltigerUnternehmensführung, ständiger Investitionen und Expansionen einer der führenden Anbieter von konfektionierten Kernwerkstoffen und ergänzenden Zubehörprodukten für den Leicht- & Sandwichbau.
Als eigentümergeführtes Familienunternehmen steht Ihnen Gaugler & Lutz als kom-petenter und zuverlässiger Ansprechpartner bei der Auswahl von Kernwerkstoffen und deren Konfektion für den Leicht- und Sandwichbau zur Seite. Ebenso umfasst das Pro-duktportfolio Sport-, Gymnastik- und Freizeitmatten der Marke AIREX® sowie Sport-, Reha- und Freizeitartikel der Hausmarke softX®.
Des Weiteren steht neben der im Hause selbst durchgeführten Konfektion undVeredelung ein umfassender und redundanter Maschinenpark zur Verfügung. Von einfachen Bearbeitungsmaschinen über thermisches Umformen „MULTISHAPE“ bis hin zu vollautomatischen 5-Achs-Bearbeitungszentren können sowohl Prototypen als auchGroßserien gefertigt werden.
Gaugler & Lutz oHG
Habsburgerstr. 12
73432 Aalen-Ebnat, Germany
Tel.: +49 7367 9666-0
Fax: +49 7367 9666-60
E-Mail: [email protected]
Web: www.gaugler-lutz.de
Halle / Stand 6/A04
97
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsGma - Gra
G
Die Grasse Zur Ingenieurgesellschaft entwickelt und vertreibt neuartige Prüfsystemezur Charakterisierung und Messung von Faserverbundwerkstoffen. Diese Prüfsysteme werden für die industrielle Forschung und Entwicklung, zur Bestimmung der optimalenDimensionierung von Bauteilen, zur Qualitätssicherung in der Fertigung sowie in der Wareneingangskontrolle eingesetzt.
Zur Bestimmung der Faser-Matrix-Anbindung und der Schubkennwerte von GFK undCFK setzt die Grasse Zur Ingenieurgesellschaft den Schubrahmen GZ S-80 ein. Dieser stellt eine stark verbesserte Prüfmethode im Vergleich zu den entsprechenden NormenASTM und DIN EN ISO dar.
Neben den Produkten zur Materialprüfung bietet die Grasse Zur Ingenieurgesellschafteinen kompletten Service rund um die Prüfung von GFK und CFK an. Gemeinsam mitden Auftraggebern werden die Wünsche und Anforderungen an die Ermittlung der Ma-terialkennwerte spezifiziert. Dabei profitiert der Auftraggeber von einem kompletten Prüfprozess aus einer Hand.
Grasse Zur Ingenieurgesellschaft mbH
Schottmüllerstraße 25a
14167 Berlin, Germany
Tel.: +49 30 84708190
Fax: +49 30 84708192
E-Mail: [email protected]
Web: www.grassezur.de
Halle / Stand 6/G17
Granta Design Ltd.Material Intelligence300 Rustat House 62 Clifton road
Cambridge Cambridgeshire CB1 7EG, United Kingdom
Tel.: 01223 518895
Fax: 01223 506432
E-Mail: [email protected]
Web: www.grantadesign.com
Halle / Stand 6/D42
Gößl+Pfaff Gmbh - Der Systempartner für Sie. Aufgrund langjähriger Partnerschaften mit führenden Rohstoff-Herstellern der Compo-sitesbranche z.B. Huntsmann, 3M, Wacker, Sia, Mirka, sowie eigens für uns produzierte Produkte ist uns ein breitgefächertes Angebot möglich. Durch anwendungstechnischeBeratung, Produktschulung, Technischen Service, Vorführung der neuesten Produkte und Verarbeitungstechniken durch unsere Mittarbeiter, bieten wir Ihnen den größt-möglichen Nutzen.
Epoxid-Polyurethan und Polyestersysteme, Kohlefasergewebe , Glasfilamentgewebe,Multiaxial und Mehrlagengewebe, Spachtelmassen,Verbrauchsmaterialien Vacuumlaminate und Resininfusionstechnik, Klebstoffe, Matrix und ToolngSysteme, Blockmaterialien, Statikmischer, Werkzeuge wie Pinsel, Scheren , Skalpelle, Zubehör wie Pappbecher, Eimer, Rührstäbchen, um nur wenige Produkte unseres Liefersortiments zu nennen, haben wir in unserem Lager für Sie bereit.
Gößl & Pfaff GmbH
Münchener Str. 13
85123 Karlskron, Germany
Tel.: 084 50 9 32 0
Fax: 084 50 9 32 13
E-Mail: [email protected]
Web: www.goessl-pfaff.de
Halle / Stand 4/A11
Die GMA-WERKSTOFFPRÜFUNG GMBH – ist einer der deutschen Marktführer im Bereich Qualitätssicherung/Werkstoffprüfung. Seit Oktober 2012 gehört die GMA zur Mistras Group Inc. (Princeton/USA), einem weltweit führenden Konzern für Komplettlö-sungen zur Anlagenüberwachung & -sicherung. Unser Portfolio umfasst zerstörende und zerstörungsfreie Prüftechniken und wir sind ein nach DIN EN ISO 17025 akkredi-tiertes Unternehmen, verfügen über Airbus Lab Qualification sowie Nadcap und sind zugelassener luftfahrttechnischer Betrieb nach EASA PART 145. Unser Tätigkeitsfelderstreckt sich auf projektbezogene Arbeiten für Industrie- und Kraftwerksanlagen sowie auf Fertigungs- und Zulieferbetriebe der Automobil- & Luftfahrtindustrie. Auf Basis unserer Prüfzentren und –laboratorien an 11 deutschen und 3 niederländischen Standorten, besitzen wir ein hervorragendes Netzwerk für Problemlösungen in derPrüftechnik, ob für Metalle oder Verbund- bzw. Faserverbundwerkstoffe (CFK/GFK).
GMA Werkstoffprüfung GmbH
Julius-Leber-Weg 24
21684 Stade, Germany
Tel.: 04141 799 250
Fax: 04141 799 299
E-Mail: [email protected]
Web: www.gma-group.com
Halle / Stand 4/C13
98
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsGrm - Gun
G
GUNNAR InternationalWeissenberger AGStaatsstrasse 119
9445 Rebstein, Switzerland
Tel.: 0041 71 775 8220
Fax: 0041 71 775 8229
E-Mail: [email protected]
Web: www.gunnar-int.com
Halle / Stand 6/E05
Guhdo GmbH produziert Schneidwerkzeuge für die meisten Verbundwerkstoff-Anwen-dungen. Dies sind Bohrungs-, Fräs-, -und Schneidwerkzeuge aus Hartmetall, DIA-bestückt oderin beschichteter Ausführung. Darüber hinaus stellen wir Sonderanfertigungen auf Kun-denwunsch her. Diese sind genau auf den individuellen Anwendungsfall ausgelegt. Werkzeuge von GUHDO werden eingesetzt in der Industrie. Speziell in der Automobil, Luft-und Raumfahrt, Bau-, Marine-und Konsumgüterindustrie.
Guhdo GMBH produces cutting tools for most composite material applications. This includes drilling, milling, routing and cutting tools in solid carbide, CVD and diamondcoated versions.In addition bespoke design capabilities can suit specific requirements. Tooling from GUHDO is used in most industry applications, including Automotive, Aerospace, Construction, Marine and Consumer Goods industries. Guhdo GMBH was founded in 1908 in Remscheid, Germany and serves Germany andthe main European markets.
GUHDO GmbH
P.O.Box 501228 Elbringhausen 10
42929 Wermelskirchen, Germany
Tel.: +49 (0) 2196/949-0
Fax: +49 (0) 2196/949-100
E-Mail: [email protected]
Web: www.guhdo.de
Halle / Stand 6/B37
Bänder und Gurte von Güth & Wolf GmbH Die Band und Gurtweberei Güth & Wolf GmbH produziert seit 125 Jahren textile Bän-der und Gurte von 3 bis 300 mm aus allen gängigen cellulosischen und synthetischen Fasern mit einer Zugkraft bis zu 60 Tonnen und einer Tagesproduktion von über 1 Mio. Metern. Wir verarbeiten für jede Aufgabe die geeigneten Materialien – im Hinblick auf Funktion, Sicherheit und Haltbarkeit. Die Bänder und Gurte von Güth & Wolf GmbH werden in vielen verschiedenen Bran-
chen eingesetzt, wie Arbeitsschutz, Arbeitssicherheit, Ladungssicherung, Automobilin-dustrie, Vulkanisation, Sport, Heimtextilien, sowie im Bereich der Composites.
Güth & Wolf GmbH verwendet unterschiedliche Materialien für die Herstellung vonComposites:
Anwendungsgebiete der Composites ist der Leichtbau für:
Güth & Wolf GmbH
Herzebrocker Str. 1
33330 Gütersloh, Germany
Tel.: 0049 5241 879 0
Fax: 0049 5241 879 238
E-Mail: [email protected]
Web: www.gueth-wolf.de
Halle / Stand 4/E29
The producer of high quality epoxy systems and epoxy modifications which cover com-plete range of composite production technologies (RTM vacuum infusion, hand lamina-tion, machine winding, pultrusion, casting and filling-up, moulding and compression moulding, bonding and structural bonding) and distributor of wide assortment of raw materials for composite production – fibre reinforcements (carbon, glass, aramid, hybrid and polyester fabrics, tapes and roving), core materials (honeycombs, PVC and PUR sheets, volumised products) and other materials (peel-plies, release agents, fillers, carbon tubes and rods, scissors, materials for vacuum technology).
GRM Systems s.r.o.
Slatinky 158
Slatinke 78342, Czech Republic
Tel.: +420 585 431 734
Fax: +420 585 431 994
E-Mail: [email protected]
Web: www.grm-systems.cz
Halle / Stand 4/F21
99
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsGur - Hae
H
Die Alfred Härer GmbH mit ihrem Tochterunternehmen der Haerocarbon GmbH wurdemit dem Innovationspreis Rems-Murr 2012 für ihre Entwicklung und Herstellung vonWerkzeugen zur Integration des infusiven Laminier- und Schlauchblasverfahrens für die Herstellung von Carbonhohlkammerbauteilen ausgezeichnet. Somit empfielt sich das Unternehmen als kompetenten Partner für den Bereich Werkzeugentwicklung und Werkzeugherstellung für hoch qualitative Carbonhohlkammerbauteile.
Ein Indiz dafür sind die unter der Haerocarbon GmbH geführten Eigenprodukte für denTriathlon- und Rennradsport. So entwickelte die Haerocarbon den leichtesten Zeit-fahrlenker der Welt und unter anderem einen multifunktionalen Triathlonlenker. Beide Produkte überzeugen durch diese Alleinstellungsmerkmale auf dem Markt und werden bereits im Profi- und Breitensport mit Erfolg eingesetzt.
Alfred Härer GmbH,Werkzeug- und Formenbau Haero Carbon GmbHKiesäckerstraße 9
73547 Lorch, Germany
Tel.: 07172 927 990
Fax: 07172 927 9949
E-Mail: [email protected]
Web: www.haerer-formenbau.de, www.haero-carbon.de
Halle / Stand 6/G04
Als Dienstleistungs-/Handels- und Beratungsunternehmen im Composite Bereich bietet die HACOTECH GmbH ihren Kunden „Lösungen aus einer Hand“. Neben dem Verkauf von Faserverbundwerkstoffen (Gewebe, Gelege, Rovings, Gewebebänder, Prepregs, Epoxidharz, Gelcoat, Polyesterharz, Folien, Vakuumzubehör, Trennmittel, Füllstoffe, Nomex- und Aluminiumwaben, Werkzeuge und Hilfsmittel) sowie der Konfektionierung der Waren haben wir uns auf die Übernahme von Projekten zur Produktneueinführung sowie der Umstellung von Fertigungsverfahren spezialisiert. Als Ergänzung hierzu bieten wir unseren Kunden sowie interessierten Anwendern und Neueinsteigern ein umfassendes Schulungsangebot im Composite Bereich. Nähere Informationen hierzu erhalten Sie auf unserer Website: www.hacotech.com.
HACOTECH GmbH
Randersweide 1
21035 Hamburg, Germany
Tel.: +49 (0)40/797 557-190
Fax: +49 (0)40/797 557-199
E-Mail: [email protected]
Web: www.hacotech.com
Halle / Stand 4/C17
HACO ist eine deutsche Kompositfirma die unter europäische Führung in Tunesienangesiedelt ist. HACO ist sehr vielseitig im Faserverbundtechnik tätig und hat sich auf viele verschiedene Bereiche spezialisiert. Der Hauptproduktionsbereich ist der Segel-bootsbau. Ein großer Teil der Produktion befasst sich mit der Serienfertigung von Mo-torbooten. Die Herstellung der Industrieformteile gibt gegenüber den unregelmäßigen Abläufen der Schiffsproduktion eine Kontinuität und ist eine perfekte Ergänzung dazu. Die Fahrzeug- sowie die Motorradverkleidungen werden in verschiedenen Verfahren wie Handlaminieren, RTM und RIM hergestellt.Die Erfolgsgeschichte der Akilaria Segelboote haben das Unternehmen zu dem ge-macht, was es heute ist.
HACO S.a.r.l.
BP. 139 Croisement El Kedoua
El Haouaria 8045, Tunisia
Tel.: +216 72 297 021
Fax: +216 72 297 020
E-Mail: [email protected]
Web: www.haco-production.com
Halle / Stand 4/F17
Gurit has established itself as a developer and innovator in the composites industry and positioned itself as the leading global supplier of composite materials, engineering services, tooling equipment, and select parts and systems. Over 30 years‘ experience in the practical application of composites across various market sectors and projects, from small parts to large-scale structures, combined with a unique technical approach enables Gurit to offer the complete composite solution.
Gurit Composite Materials can provide complete technical solutions drawing on a broad range of expertise in composite materials design, material development and materials application. This extensive knowledge has enabled the development of a lea-ding range of products for a broad spectrum of applications. Gurit offers a truly globalpresence with offices, manufacturing sites and a network of distributors across Europe, North and South America, the Middle East, China, Australia, New Zealand and India.
Gurit (UK)
St Cross Business Park
Newport IOW PO30 5WU, United Kingdom
Tel.: 0044 1983 828000
Fax: 0044 1983 828100
E-Mail: [email protected]
Web: www.gurit.com
Halle / Stand 4/D07
100
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsHan - Hei
H
HEIDELBERG ist einer der weltweit führenden Lösungsanbieter für die Printmedienin-dustrie. Moderne Druckmaschinen verbinden Geschwindigkeit mit Präzision, Zuverläs-sigkeit, Langlebigkeit im Umgang mit biegeschlaffen Materialien.
Gepaart mit der spezifischen HEIDELBERG-Kompetenz in Fertigung und Automatisie-rung will HEIDELBERG Lösungen für die Automatisierung und Handhabung textiler Strukturen entwickeln und damit den Weg zur Industrialisierung der Faserverbundferti-gung ebnen.
Heidelberger Druckmaschinen AG
Gutenbergring
69168 Wiesloch/Walldorf, Germany
Tel.: 06222 82 5104
Fax: 06222 82 995104
E-Mail: [email protected]
Web: www.heidelberg.com
Halle / Stand 4/C02
We are a worldwide acting group of companies. With our subsidiaries, we develop andmanufacture production equipment and complete production lines. Our customersrange from the electrical and electronics industry, automotive industry and chemical industry. They are offered customized and innovative technical products as well as services meeting with their entire chain of requirements. Their benefit: Receiving all Hedrich system solutions from one source, in highest quality, worldwide.
Being active in more than 30 countries, we employ more than 290 people and fuse under one umbrella internationally acting companies. Our equipment and solutions for automation exactly match with each other. All customers can be assured that with our products they will obtain top quality, top innovative, best reliable and safe equipmentand services.
Hedrich GroupHedrich GmbHGreifenthaler Str. 28
35630 Ehringshausen, Germany
Tel.: +49 6449 929 0
Fax: +49 6449 929 149
E-Mail: [email protected]
Web: www.hedrich.com
Halle / Stand 6/A28
Die Business Unit HARKE Composites hat sich vor allem auf den Vertrieb von Roh-und Füllstoffen sowie Additiven für Faserverbundstoffe spezialisiert. Dabei liegt der Schwerpunkt unseres Angebotes insbesondere auf Epoxidharzen bzw. kundenspezifi-schen Epoxidharzsystemen.
Ferner bietet HARKE Composites ein umfangreiches Programm an Reaktivverdünnernsowie Härtern an.
Ergänzt wurde unser Portfolio seit Anfang 2012 um ungesättigte Polyesterharze sowieVinylesterharze für verschiedene Anwendungsbereiche.
HARKE Chemicals GmbH
Xantener Straße 1
45479 Mülheim an der Ruhr, Germany
Tel.: 0049 208 3069 1300
Fax: 0049 208 3069 1301
E-Mail: [email protected]
Web: www.harke.com
Halle / Stand 4/D23
Die HANSA als eine der führenden internationalen maritimen Fachzeitschriften Euro-pas informiert monatlich die Entscheider der Branche – seit mehr als 145 Jahren. Auf-geteilt in die fünf Hauptrubriken »Schiffbau«, »Schifffahrt«, »Offshore«, »Logistik« sowie»Häfen und Wasserstraßen« findet der Fachleser neben detaillierten Beschreibungen neuer Schiffstypen und deren moderner Antriebstechnik auch Schiffsfinanzierung,Recht, Versicherung und Steuern, Märkte, Trends und Potenziale sowie wichtige Perso-nalien – fundiert analysiert von Branchen-Experten und kompakt präsentiert. In den vergangenen Jahren hat die HANSA insbesondere ihre Berichterstattung über die maritime Seite der Offshore-Windkraft ständig ausgebaut. Das Themenspektrumreicht von Beschreibungen über Offshore-Errichterschiffe und anderer spezialisierter Schiffstypen hin zu Offshore-Windkraft-Logistik, Sicherheitsstandards in Windparks bis hin zur Beschreibung von Offshore-Projektverträgen aus rechtlicher Sicht.
“HANSA“Schiffahrts-Verlag „Hansa“ GmbH & Co. KGGeorgsplatz 1
20099 Hamburg, Germany
Tel.: +49 (0)40 70 70 80-01
E-Mail: [email protected]
Halle / Stand 6/C30 Media Pavilion
101
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsHel - Her
H
Heraeus Noblelight GmbH mit Sitz in Hanau, mit Tochtergesellschaften in den USA,Großbritannien, Frankreich, China und Australien, gehört weltweit zu den Markt- und Technologieführern bei der Herstellung von Speziallichtquellen. Heraeus Noblelight wies 2012 einen Jahresumsatz von 92,5 Millionen auf und beschäftigte weltweit 715 Mitarbeiter. Das Unternehmen entwickelt, fertigt und vertreibt Infrarot- und Ultravi-olett-Strahler und -Systeme für Anwendungen in industrieller Produktion, Umwelt-schutz, Medizin und Kosmetik, Forschung und analytischen Messverfahren.Heraeus Noblelight hat zum 31.01.2013 die Fusion UV Systems-Gruppe mit Hauptsitz in Gaithersburg, Maryland (USA) erworben.
Heraeus Noblelight GmbH
Heraeusstr. 12-14
63450 Hanau, Germany
Tel.: 06181 35 8469
Fax: 06181 35 168469
E-Mail: [email protected]
Web: www.heraeus-noblelight.com/Infrared
Halle / Stand 4/B04
Hennecke GmbH
Birlinghovener Str. 30
53757 Sankt Augustin, Germany
Tel.: 02241 339 0
Fax: 02241 339 204
E-Mail: [email protected]
Web: www.hennecke.com
Halle / Stand 6/D16
Die Fa. Hengstmann Solutions GmbH ist ein Unternehmen der Automatisierungstech-nik.Primär liefert das Unternehmen Bildverarbeitungslösungen für die Qualitätssicherung,die Prozessteuerung und Systeme zur interaktiven Führung der Werker bei manuellen Montage- und Bestückungsvorgängen.
Im Zuge unserer Projekte haben einige Systeme zur Produktionsunterstützung und-optimierung von Faserverbund-Teilen entwickelt.
Hengstmann Solutions GmbH
Am Reutberg 4
83679 Sachsenkam, Germany
Tel.: +498021 50472 10
Fax: +498021 50472 28
E-Mail: [email protected]
Web: www.hengstmann.com
Halle / Stand 6/F21
Seit 1974 beschäftigt sich Held Systems mit der Lasertechnik und widmet sich seitdem der Entwicklung und Applikation von Lasertechnologie in der Fertigung. Die in vielen Jahren gesammelten Erfahrungen und die intensiveZusammenarbeit mit Forschungsinstituten sind heute die Basis für die Stärke von Held Systems. Schildern Sie uns Ihre Fertigungsvorhaben und Ihre Vorstellungen dazu und wir werden uns bemühen zusammen mit Ihren Spezialisten die beste Lösung zu finden und zu realisieren.
Anlagen von Held Systems sind kundenspezifische Lasersysteme zumSchneiden und Schweißen von verschiedensten Materialien, wie Kunststoffe, Compo-site (GFK, CFK), technische Textilien u.ä.
HELD SYSTEMS GmbH
Industriestraße 26
63150 Heusenstamm, Germany
Tel.: +49 6104 6648-0
Fax: +49 6104 6648-20
E-Mail: [email protected]
Web: www.held-systems.com
Halle / Stand 4/B04
102
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsHex - Hhp
H
hhp home health products AG
Sophienstr. 15-17
76133 Karlsruhe, Germany
Tel.: 0721 16143 0
Fax: 0721 16143 92
E-Mail: [email protected]
Web: www.hhp.de
Halle / Stand 4/A26
HG GRIMME SystechSeit über 25 Jahren sind wir Hersteller mittlerer bis großer hochrationeller 5-Ach-sen-Bearbeitungszentren zur Bearbeitung von Kunststoffen und Verbundwerkstoffen (Composite Materials) sowie Aluminium und Holz.Unser mittelständisches Unternehmen mit Firmensitz Nähe München, fertigt Maschi-nen nach individueller Kundenanforderung in allen Größen, Varianten und Ausbaus-tufen. Die Anlagen werden für effektivste Verfahrensabläufe mit Fräs-, Schneid- oderWasserstrahlschneidtechnologie ausgestattet. Deshalb sind unsere Maschinen auch in anspruchsvollen Branchen wie der Luft-, Raumfahrt- und Automobilindustrie, bei Automobilzulieferern, im Yachtbau sowie im Modell- und Formenbau im Einsatz. Wir erarbeiten für jede Technologie und alleMaterialanforderungen äußerst effiziente Lösungen. Unser familiengeführter Betriebist Systempartner von rund 700 Kunden auf allen Kontinenten. Filmmaterial unserer Anlagen aus der Praxis: www.hg-grimme.de /produkte
HG GRIMME SysTech GmbH
Osterweg 23
86879 Wiedergeltingen, Germany
Tel.: +49 82 41 96 08 0
Fax: +49 82 41 96 08 55
E-Mail: [email protected]
Web: www.hg-grimme.de
Halle / Stand 6/F29
Hexcel is a leading advanced composites company. It develops, manufactures and markets lightweight, high-performance structural materials, including carbon fibers, reinforcements, prepregs, honeycomb, matrix systems, adhesives and composite struc-tures, used in commercial aerospace, space and defense and industrial applications.
Hexcel Composites SA
45 rue de la Plaine CS10027
01126 Dagneux Cedex, France
Tel.: +33 4 72 25 26 27
Fax: +33 4 72 25 27 30
E-Mail: [email protected]
Web: www.hexcel.com
Halle / Stand 4/D29
Hexagon Devold (previously Devold AMT) is one of the world‘s leading companies in the multiaxial reinforcement market. The firm produces stitched fiber glass, carbon fiber and hybrid reinforcements, mainly for the windmill industry. Hexagon Devold owns state of the art manufacturing technology which supplies a complete range of advanced unidirectional and multiaxial stitched reinforcements.
The company was founded in 1990 with headquarters located in Norway. The ma-nufacturing facility for the European market is located in Lithuania and in USA for serving the North American market.Hexagon Devold is a wholly owned subsidiary of Hexagon Composites ASA, a leading international manufacturer of lightweight composite solutions. Our ambition is to grow further in the global market and maintain our leading position. As a part of our ambitions we are implementing a unified global brand in order to be seen as one company.
HEXAGON DEVOLD AS
Langevaag
Langevåg 6030, Norway
Tel.: 0047 70 19 85 00
Fax: 0047 70 19 85 01
E-Mail: [email protected]
Web: www.hexagondevold.com
Halle / Stand 4/D14
103
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsHil - Hof
H
Hofer Textilveredelung GmbH
Unser Unternehmen mit Sitz in Hof/Saale beschäftigt sich mit der Veredelung von Textilien. Auf modernsten Flammkaschieranlagen produzieren wir nach Spezifikation oder realisieren individuelleSonderanfertigungen.
Unser Anspruch ist höchste Qualität. Durch neueste Labor- undMesstechnik wird der gesammte Produktionsprozess überwacht.
Unseren Kunden bieten wir Flexibilität in Terminen, Kapazität sowie bei Neuentwick-lungen.
Wir sehen jede Geschäftsbeziehung als ständige Herausforderung und orientieren uns an den Wünschen und Erwartungen unserer Kunden.
Hofer Textilveredelung GmbH
Am Wiesengrund 20
95032 Hof, Germany
Tel.: +49 9281-750359
Fax: +49 9281-750237
E-Mail: [email protected]
Web: www.lamination.de
Halle / Stand 6/B04
Höfer Presstechnik GmbH
Pramerstr. 11
4753 Taiskirchen, Austria
Tel.: 0043 7764 73510
Fax: 0043 7764 7570
E-Mail: [email protected]
Web: www.hoefer-maschinen.com
Halle / Stand 6/C16
Die Kompetenzen auf dem Gebiet der stofflichen Nutzung nachwachsender Rohstoffean der Hochschule Magdeburg-Stendal werden seit mehreren Jahren durch F&E-Pro-jekte im Kompetenzzentrum Ingenieurwissenschaften/Nachwachsende Rohstoffe kon-tinuierlich entwickelt. Die Arbeitsgruppe Biowerkstoffe ist interdisziplinär zusammen-gesetzt und bearbeitet vorrangig Projekte zur Herstellung, Prüfung und Optimierung von Werkstoffen in den Herstellungsverfahren Heißpressen und Naturfaserspritzguss. Wichtige Kooperationspartner sind Unternehmen der Automobilindustrie, Herstellervon Gebrauchsgegenständen und die Kreativwirtschaft.
Hochschule Magdeburg-Stendal (FH)KAT-Kompetenzzentrum an der Hoch-schule Magdeburg-StendalBreitscheidstr. 51 Raum 1.16
39114 Magdeburg, Germany
Tel.: 0391-886 44 67
Fax: 0391-886 44 57
E-Mail: [email protected]
Web: www.hs-magdeburg.de
Halle / Stand 4/C22
Die Hilger u. Kern / Dopag Gruppe gehört mit über 250 Mitarbeitern zu den welt-größten Herstellern von Dosier- und Mischanlagen. Diese werden für die Verarbeitung von mehrkomponentigen Polymeren und 1K-Medien wie Fette, Öle und Klebstoffeeingesetzt. Die Gruppe, mit Niederlassungen und Distributoren in mehr als 30 Ländern,entwickelt und baut seit über 35 Jahren Anlagen sowie Einzelkomponenten, die auf den individuellen Bedarf der Anwender zugeschnitten sind.
Hilger u. Kern GmbH
Käfertaler Str. 253
68167 Mannheim, Germany
Tel.: 0621 37050
Fax: 0621 3705200
E-Mail: [email protected]
Web: www.hilger-kern.de
Halle / Stand 4/D30
104
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsHol - Hpt
H
HP-Textiles GmbH
Otto-Hahn-Str. 22
48480 Schapen, Germany
Tel.: +49 (0) 5905-94598-70
Fax: +49 (0) 5905-94598-74
E-Mail: [email protected]
Halle / Stand 6/E24, PDA_Foyer_1
HOZA CUTTER GmbH ist ein Familienunternehmen im Bereich Maschinenbau. Seit 1970 fertigen wir Schneidemaschinen und Stanzen. Im Laufe der Jahre haben wir unser Programm erweitert, so dass wir inzwischen auch Rollenschneider mit Quet-schmesserschnitt oder Ultraschall sowie Lösungen im Bereich Schneiden/Kleben von Textilien und technischen Textilien anbieten. Wir haben uns auf die Herstellung von Einbaumodulen zum Schneiden verschiedenster Textilien/Materilalien spezialisiert, die mit Quetschmessern oder Ultraschallschneid-köpfen arbeiten. Aufgrund der Flexibilität in der Fertigung finden wir für fast jedes Problem eine Lö-sung. Alle Maschinen sind im Baukastensystem konstruiert, sodass eine Anpassung andie Anforderung des jeweiligen Kunden zu verwirklichen ist. Wir liefern Verbrauchsmaterialien wie Stanz- und Zackenmesser, Stanzunterlagen, Quetschmesser und Ersatzteile sowie Service und Wartung Ihrer Maschinen und das Schleifen von Zacken- und Glattschnittmessern.
Hoza Cutter GmbH
Mühlenweg 72
47839 Krefeld, Germany
Tel.: +492151730033
Fax: +492151730034
E-Mail: [email protected]
Web: www.hoza-cutter.de
Halle / Stand 6/A16
Holland Composites Pavilion
de Ruijter Consultancy Herenwal 132A
8441 BE Heerenveen, The Netherlands
Tel.: 0031 513 610666
Fax: 0031 513 650260
E-Mail: [email protected]
Halle / Stand 4/A32, 4/A34, 4/A36, 4/A38,4/A39, 4/B34, 4/B36, 4/B37, 4/B38
Holding Company Composite is a Russian large-scale manufacturer of carbon fibre and carbon fibre-based fabrics and prepregs. Our products are used around the world in aerospace, wind energy, construction, transportation, shipbuilding, power industry,sporting goods, and medicine. Our carbon fibre products manufacturing facilities are located in Moscow, Elabuga, Saratov, Chelyabinsk and Dubna, Russia. In 2010 thecompany established an R&D Center to develop new products and improve the opera-tional performance of existing production facilities. In 2011 a Nanotechnology Centre of Composites (NCC Russia) was created to provide comprehensive engineering support for customers. In 2013 the company will open new production facilities of significantcapacity for carbon fibre, weaving and prepregs, while putting a focus on expanding its international distribution channels.
Holding Company Composite
Volgogradsky Prosp 43 Building 3
Moscow 109316, Russia
Tel.: +7 495 787 88 28
E-Mail: [email protected]
Web: www.hccomposite.com
Halle / Stand 4/F23
105
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsHub - Icd
I
ICD / ITKE Universität Stuttgart
Keplerstrasse 11
70174 Stuttgart, Germany
Tel.: 0711 685 83 631
Fax: 0711 685 82 756
E-Mail: [email protected]
Web: www.itke.uni-stuttgart.de
Halle / Stand 4/C02, PDA_Foyer_2
IBT. ist ein innovatives Unternehmen mit Sitz in Freiberg, Sachsen. Wir sind Spezia-listen im Bereich Infrarot-Anwendungen auf Basis STIR®. Unsere Technologie ist für einige verfahrensspezifische Anwendungen patentrechtlich geschützt. Wir entwickeln,fertigen und vertreiben energie-, zeit- und raumeffiziente, resonante und mit Oxid-keramiken beschichtete STIR®-Infrarotheizelemente zur thermischen Oberflächenbe-arbeitung. Mit der speziellen STIR®-Technologie können wir flexible Infrarot-Lösungenauf breit gefächerten Anwendungsgebieten präsentieren:
IBT.InfraBioTech GmbH
Am St. Niclas Schacht 13
09599 Freiberg, Germany
Tel.: 0049 - 3731 - 1683 0
Fax: 0049 - 3731 - 1683 29
E-Mail: [email protected]
Web: www.infrabiotech.de
Halle / Stand 6/G05
Über 25 Jahre Erfahrung in der Zerspanung sind Ihre Sicherheit für fundierte Prozessberatung, erstklassige Produktlösungen und anwendergetriebenen Service.Hufschmied Zerspanungssysteme gliedern sich in die Bereiche High Performance Tools für den Werkzeug- und Formenbau und KunststoffFräser. Hufschmied-Fräser für den Werkzeug- und Formenbau sowie für die Kunststoffbearbeitung überzeugen durch überragende Leistung in punkto Qualität, Standzeit und Schnittverhalten.
So setzen führende Zulieferer-Unternehmen z. B. der Automobilindustrie oder Aerospace seit Jahren mit Erfolg auf Hufschmied High Performance Tools und Kunst-stoff-Fräser. Durch unser Potential für komplexe technische Anforderungen und unser täglich wachsendes Know How sind wir in der Lage, mit Ihnen gemeinsam Ihre Ziele zu übertreffen. Die Steigerung Ihrer Produktivität, die Senkung Ihrer Fertigungskosten und die Erhöhung Ihrer Rentabilität ist unser Anspruch.
Hufschmied Zerspanungssysteme GmbH
Edisonstr. 11D
86399 Bobingen, Germany
Tel.: 08234 9664 0
Fax: 08234 9664 99
E-Mail: [email protected]
Web: www.hufschmied.net
Halle / Stand 6/E40
Unsere Business Unit Composites der HUBER+SUHNER AG entwickelt und fertigt kundenspezifische Präzisionsteile aus Faserverbundwerkstoffen. Mit der richtigenMaterialauswahl und deren Kombination erreichen unsere Werkstoffe optimierte Eigenschaften bei geringstem Gewicht. Mit unserer konsequenten Kundenorientierung bieten wir massgeschneiderte Lösungen auf höchstem Qualitätsniveau und schaffen so den entscheidenden Mehrwert für unsere Kunden. Durch eine eigene Entwicklungs-abteilung, vier unabhängige Fertigungstechnologien, der mechanischen Bearbeitung und der Materialprüfung erhalten Sie komplette Leichbaulösungen mit modernstenWerkstoffen aus einer Hand.
HUBER+SUHNER AGBusiness Unit CompositesAllmendstr. 15
8320 Fehraltorf, Switzerland
Tel.: 0041 44 954 98 00
Fax: 0041 44 954 98 98
E-Mail: [email protected]
Web: www.composites.ch
Halle / Stand 6/E30
H
106
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsIfc - Ind
I
Als Hightech-Unternehmen entwickelt und produziert die iNDTact GmbH Sensorsys-teme für Bauteile aus Faserverbundwerkstoffen wie CFK und GFK. Das Besondere: iNDTact-Sensoren lassen diese Bauteile „fühlen“ und überwachen deren „Intaktheit“. Ermöglicht wird dies durch maximale Kompatibilität, extreme Robustheit, vollständige Integrierbarkeit und überdurchschnittliche Sensitivität unserer Systeme. Damit werdenhöchste Ansprüche unserer Kunden aus den Branchen Automobil, Luftfahrt, Windkraft,Maschinenbau sowie Freizeit und Sport erfüllt. Überall dort, wo Leichtbau ein Themaist, sind iNDTact Sensoren zukunftsweisend und für unsere Kunden unverzichtbar.
iNDTact GmbH
Friedrich-Bergius-Ring 15
97076 Würzburg, Germany
Tel.: +49 (0)931 2 999 7 330
Fax: +49 (0)931 2 999 7 325
E-Mail: [email protected]
Web: www.indtact.de
Halle / Stand 6/F23
India Composites Show from 24th – 26th October’13 at Pragati Maidan, New Delhi is one of the largest, most recognizable and result oriented exhibition of CompositesIndustry in Asia. The exhibition and conference will focus on bringing the various application segments to meet advanced materials and composite industry. The exhi-bitors profile includes Resins, Carbon Fiber, Glass Fiber, Adhesives, Additives, Release Agents, High Performance Materials, Polyurethanes, Specialty Chemicals, Non Woven,Technical Textiles, Nano Composites, Core Materials, Honey Comb, Hybrid Structures,Automation, Prototyping, Coatings, Metering, Autoclaves, Vacuum Bagging, Software, CAD/CAM/CAE, Processing, Laser Cutting, CNC, NDT, et al. Special featured Technical Textile & Polyurethane Zones. The event will witness international footfall from more than 18 countries. Industry veterans both as speakers and delegates in two day confe-rence. Technical seminars and panel discussions to embrace market knowledge.
India Composites ShowOrganiser Reed Manch Exhibitions (P) LtdA-78, First Floor, Sector - 4
Noida ULPR 201301, India
Tel.: +91-9990626964
E-Mail: [email protected]
Halle / Stand 4/E28
Incotelogy Ltd.Basalt Fiber ProductsSachsstr. 18
50259 Pulheim, Germany
Tel.: +49 2234 9882370
Fax: +49 2234 9882372
E-Mail: [email protected]
Web: www.incotelogy.de
Halle / Stand 4/E27
IFC Composite GmbH ist ein Zulieferunternehmen und Partner für die Automobilin-dustrie mit mehr als 10 Jahren Erfahrung im Bereich Bauteile aus Composite. Seit 9 Jahren werden die Fahrzeuge Sprinter und Crafter von Mercedes-Benz und Volkswagenmit den GFK-Querblattfedern aus unserem Hause ausgerüstet. Mehr als 1,1Mio.Stück unserer Querblattfedern wurden bislang erfolgreich mit 0 PPM verbaut. Dasfür die Herstellung der Serienproduktion eingesetzte Halbzeug Prepreg stellen wir in Eigenfertigung her. Die Konfektionierung der GFK-Rohlinge sowie das Heißpressenerfolgt auf automatischen Anlagen und Pressen. Für jedes Bauteil garantieren wir eine 100-prozentige Rückverfolgbarkeit. Des Weiteren entwickelt IFC, u.a. für OEM’s, erfolg-reich dynamisch hochbelastete Faserverbundstrukturbauteile - GFK-Längsblattfedern, GFK-Schraubenfederersatzsysteme - von der FE-Auslegung über Werkzeugauslegung, Prototypen- und Prozessentwicklung bis hin zu Prototypen- und serienbegleitenden Tests.
IFC Composite GmbH
Jakob-Uffrecht-Str. 2
39340 Haldensleben, Germany
Tel.: 03904 725 06 0
Fax: 03904 725 06 100
E-Mail: [email protected]
Web: www.ifc-composite.de
Halle / Stand 6/D28
107
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsInd - Inn
I
Ihr innovativer und zuverlässiger Partner für die Entwicklung, Herstellung und den Vertrieb technischer Textilien. Wir sind Zulieferer der Automobil- und Maschinen-bauindustrie für neue und innovative Produkte mitten in Deutschland.
Die Lösung - auch für Ihr Problem. Wir bieten kundenspezifische Entwicklungen, hochtechnoligische Ressourcen, globale Fertigungsmöglichkeiten, kontinuierliche Überarbeitung unserer Produktpalette.
Wir freuen uns auf Ihre Anfrage!
Innotect GmbH
Gewerbering 1
08451 Crimmitschau, Germany
Tel.: 09251 8992 14
Fax: 09251 8992 418
E-Mail: [email protected]
Web: www.innotect.de
Halle / Stand 4/F39
Das Österreichische INDUSTRIEMAGAZIN ist das Leitmedium für die produzierendeWirtschaft sowie industrienahe Dienstleister. Wichtigste Management- und Produkti-onsthemen, ökonomische Trends sowie spannende Marktanalysen aus den Bereichen:Anlagen & Maschinenbau, Fertigung & Automation, Energie- & Umwelt, Rohstoffe &Chemie, Automotive & Nutzfahrzeuge sowie Transport & Logistik werden gründlich re-cherchiert und verständlich aufbereitet. Das österreichische Industriemagazin versteht sich als Servicemagazin für alle technischen und kommerziellen Entscheidungsebenen der heimischen Industrie.
“Industriemagazin“Industriemagazin Verlag GmbHLindengasse 56
1070 Wien, Austria
Tel.: 0043 1 585 9000 0
Fax: 0043 1 585 9000 16
E-Mail: [email protected]
Web: www.industriemagazin.net
Halle / Stand 6/C30 Media Pavilion
“Industrial Engineering News“Thomas Industrial Media GmbHRuhrallee 185
45136 Essen, Germany
Tel.: +49 (0)201 8945 210
Fax: +49 (0)201 8945 58210
E-Mail: [email protected]
Web: www.tim-europe.com
Halle / Stand 6/C30 Media Pavilion
Industria Chimica Reggiana I.C.R. S.p.A. was founded in 1961 in Reggio Emilia. Its administrative offices and principal manufacturing plant are located in Reggio Emilia.Its other production plants are situated in Cavriago (RE) and Lodi. The companyemploys 140 workers and covers an area of over 22.000 square meters. I.C.R. S.p.A.has a subsidiary company ICR Iberica S.A. in Spain In 2010 it reached a turnover of 40,000,000 together with its Spanish branch. I.C.R S.p.A is certified ISO 9001:2008. I.C.R.- was created as a manufacturer of polyester putties for car refinishing and polyester adhesives for marble .Within a couple of decades, I.C.R. had become firmly established on the market with its brand name now know world wide „SPRINT“In Composites ICR have built a very wide proposition of materials: Bonders for Core Materiala Adhesives Fillers and products to Fix Structural adhesives PaintsEvery year we add something at our proposal help the customers in his work
Industria Chimica Reggiana I.C.R SPA
VIA MARIO GASPARINI, 7
42124 REGGIO EMILIA, Italy
Tel.: +39 052 251 3738
Fax: +39 052 251 2446
E-Mail: [email protected]
Web: www.icrsprint.it
Halle / Stand 6/B02
108
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsIns - Int
I
“Interceram“Expert Fachmedien GmbHAachener Str. 172
40223 Düsseldorf, Germany
Tel.: +49 211 1591 210
Fax: +49 211 1591 150
E-Mail: [email protected]
Web: www.interceram-review.info
Halle / Stand 6/C30 Media Pavilion
Die intec Bielenberg GmbH & Co. KG wurde 1972 gegründet. Sie entwickelt, fertigt und vertreibt Pump- und Dosieranlagen sowie Steuerungstechnik für viskose und hochvis-kose Medien wie Klebstoffe, Leim oder Pasten. Intec- Klebtechniksysteme sind seit über 25 Jahren erfolgreich im Einsatz. Im Bereich des zukunftsträchtigen Mehrkomponen-ten-Klebens gilt das erfolgreiche Unternehmen als Vorreiter seiner Branche.
intec Bielenberg GmbH & Co. KG was founded in 1972. The company develops, ma-nufactures and sells pumping and dosing systems as well as control technology for viscous and highly viscous media such as adhesives, glues or pastes. intec adhesive systems have been successfully used for more than 25 years. In the sector of the pro-mising multi-component gluing the flourishing company is deemed a precursor.
intec Bielenberg GmbH & Co. KG
Otto Hahn Allee 9
50374 Erftstadt, Germany
Tel.: + 49 2235 46558-0
Fax: + 49 2235 46558-119
E-Mail: [email protected]
Web: www.bielenberg.de
Halle / Stand 6/A36
Die Institut für Verbundwerkstoffe GmbH (IVW) ist eine international agierende und gemeinnützige Forschungseinrichtung des Landes Rheinland-Pfalz. Wir entwickeln Composites mit thermoplastischen und duroplastischen Kunststoffen sowie mit funkti-onsoptimierten Faser- und Partikelverstärkungen.
Composite-Bauteile ermöglichen Vorteile für Anwendungen im Automobilbau, der Luft- und Raumfahrt, dem Maschinenbau, in der Energietechnik, im Bauwesen, für Sport- und Freizeitgeräte, für Medizintechnik und für viele andere Branchen.
Unsere Kompetenzfelder sind:- Bauweisenentwicklung - Prozesssimulation - Crash und Energieabsorption - Ermü-dung & Lebensdaueranalyse - Tailored Polymers and Compounds - Nanocomposites - Tribologie - Smart Structures - Werkstoffanalytik - Presstechnologien - Roving undTape Verarbeitung - Imprägnier- und Fügetechnologien
Institut für Verbundwerkstoffe GmbHTU KaiserslauternErwin-Schrödinger-Straße 58
67663 Kaiserslautern, Germany
Tel.: 0631 2017102
Fax: 0631 2017199
E-Mail: [email protected]
Web: www.ivw.uni-kl.de
Halle / Stand 6/B07
Institut für KunststoffverarbeitungRWTH AachenPontstr. 49
52056 Aachen, Germany
Tel.: 0241 8093806
Fax: 0241 8092262
E-Mail: [email protected]
Web: www.ikv-aachen.de
Halle / Stand 4/D30, 4/PDA_A, 4/PDA_C
109
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsIso - Itv
I
Das Institut für Textil- und Verfahrenstechnik (ITV) Denkendorf ist Deutschlandsgrößtes Textilforschungszentrum und betreibt Grundlagen- und anwendungsorientierte Forschung über die gesamte textile Produktionskette hinweg – vom Rohstoff bis zum Endprodukt. Der Forschungsbereich Faserverbundtechnologien beschäftigt sich mit derVerarbeitung von Hochleistungsfasern für Faserverbundwerkstoffe in den Anwendungs-bereichen Luft- und Raumfahrt, Automotive, Architektur, Maschinen- und Anlagenbau. Zentrales Thema ist die Weiterentwicklung von Fasern, Textilien und Matrixsystemen sowie die Optimierung textiler Verfahren (v. a. Flechten und Weben) und Faserverbund-herstellungstechniken (beispielsweise Duro-/Thermoplast (Flecht-) Pultrusion). Am ITV steht dazu die gesamte Prozesskette von der Auslegung und Simulation über Textil- und Preformprozesse sowie die Fertigung der Verbundbauteile bis zur Bauteilprüfungzur Verfügung und wird kontinuierlich weiterentwickelt.
ITV Institut für Textil- und VerfahrenstechnikKörschtalstraße 26
73770 Denkendorf, Germany
Tel.: +49 (0) 711 9340 0
Fax: +49 (0) 711 9340 297
E-Mail: [email protected]
Web: www.itv-denkendorf.de
Halle / Stand 4/C02
Das Institut für Textilchemie- und Chemiefasern Denkendorf gehört zu Europas größ-tem Textilforschungszentrum und betreibt unter der Leitung von Prof. Dr. Michael R.Buchmeiser Grundlagen und anwendungsorientierte Forschung entlang der gesamten textilen Produktionskette – vom Molekül bis zum Material.
Produktionsnahe Technika, spezialisierte Labors und eigene, am ITCF ausgearbeiteteProduktions- und Analyseverfahren ermöglichen die Lösung komplexer und anspruchs-voller Aufgabenstellungen für die Industrie mit ganzheitlicher Kompetenzvom Molekül bis zum Endproduktvon der Idee bis zur Marktreife
Wir entwickeln intelligente Fasern, Garne und Flächen für innovative Anwendungen inden Zukunftsfeldern Technische Textilien, Life Science, Umwelt und Bekleidung.
Nutzen Sie unser textiles Know-how für Ihren Fortschritt.
ITCF Institut für Textilchemie- und ChemiefasernKörschtalstraße 26
73770 Denkendorf, Germany
Tel.: +49 711 9340 101
Fax: +49 711 9340 185
E-Mail: [email protected]
Web: www.itcf-denkendorf.de
Halle / Stand 4/C02
ITALPRESSE is a leading manufacturer of hydraulic presses for flat lamination andcompression moulding offering a wide range of laminating solutions for the Composite Material Industry: hot/cold presses, presses with heating/cooling cycles, multi-opening feed through presses, compression moulding and custom made equipment. ITALPRESSE manufactures presses with thrust form 500 up to 100,000 KN; rangingwith any required size or productivity. ITALPRESSE already supplied equipment for applications such as FRP, SIP, polyurethane injected panels, ballistic or armor panels, honeycomb sandwich panels (aluminium,Nomex®, polypropylene), RTM, RIM (polyurethane or DCPD), BMC, DMC, SMC, GMT.Industries supplied with our products are the followings: automotive, rail, naval, ae-rospace, defence, building and many others.
ITALPRESSE S.p.A
Via delle Groane, 15
24060 Bagnatica, Italy
Tel.: +39 035 6663 413
Fax: +39 035 6663 400
E-Mail: [email protected]
Web: www.italpresse.com
Halle / Stand 6/D14
Hersteller von Nonwoven aus technischen Fasern mit Schwerpunkt Naturfasern, z.Bsp. Matten aus reinen Naturfasern oder Mischungen von Natur- und Synthesefasernwie Polypropylen. Einsatzbereich für Formteile mit duromerer oder thermoplastischer Bindung. Isowood bietet zusätzlich die Möglichkeit von Press- und Umformversuchen auf zwei 150 t-Pressen mit anschließender Materialprüfung.www.isowood.eu
Manufacturer of nonwovens made from technical fibres with the main focus of natural fibres, e.g. mats of pure natural fibres or mixtures of natural and synthetic fibres like polypropylene. Application for moulded parts with duromeric or thermoplastic binders. In addition, Isowood runs a pilot plant with two 150 t presses for pressing experimentsas well as a laboratory for determining material characteristics.www.isowood.eu
Isowood GmbH
Breitscheidstr. 156
07407 Rudolstadt, Germany
Tel.: 03672 31990
Fax: 03672 319920
E-Mail: [email protected]
Web: www.isowood.eu
Halle / Stand 6/B28
110
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsJah - Jia
J
We are the professional producer of fiberglass products. We produce direct roving, spay-up roving, smc roving and panel roving. Also we supply chopped strand mat,fiberglass tissue(surfacing veil, roofing, pipe, flooring and carpet tissue). Continuousfilament mat and vacuum insulation panel_VIP_are our new products. We can supply coated tissue, woven roving, stitch combo mat, stitch mat, battery separator, core mat, smc sheet, resin, gelcoat, wallcovering and so on. Applications include automobile manufacturing, yachts, private facilities,storage tank,pipeline coating,cooling towers,-architectural decoration and so on. Now our company has 30,000 tons of E-glass furnace and 70,000 tons of ECR-glassfurnace.
Jiangsu Changhai Composite Materials Holding Co.,ltd.
Tangqiao Yanguan Town Changzhou City
Jiangsu 213102, China
Tel.: 0086 51988708813
Fax: 0086 51988710135
E-Mail: [email protected]
Web: www.changhaigfrp.com
Halle / Stand 6/B36d
JETCAM was founded in 1986 to develop and market software systems for computer numerical control programming of punching and cutting machines used in sheet metal fabrication and composite cutting.
Our core products consist of the CrossTrack composite manufacturing suite and JET-CAM Expert CADCAM and nesting software. Crosstrack keeps track of material, materi-al life, plies, parts, kits, orders and nest - all in real time. JETCAM Expert provides bothstatic and dynamic high performance nesting for virtually every CNC cutting machine available.
JETCAM‘s world-class user base also includes some of the best known and mostdemanding companies in the world, such as ABB, Bombardier (Canada, Mexico andNorthern Ireland), Embraer, Kone Elevators, General Electric, Siemens, Volvo, Lucent, John Deere, Ericsson and several major racing car manufacturers including Red BullTechnology.
JETCAM
Millenium 9C 9 Boulevard Charles III
Monaco MC98000, Monaco
Tel.: 00377 9797 1640
Fax: 00377 9350 7626
E-Mail: [email protected]
Web: www.jetcam.com
Halle / Stand 6/F27
Von der Pflanze zum Produkt
Unter dem Namen Greenline produzieren wir nach Kundenwünschen Produkte, Form-teile und Leichtbauplatten aus Biokunststoffen. Wir suchen mit Ihnen den passenden Materialmix zur Realisierung ihrer Produktidee. Unser Leistungsspektrum umfasst diekomplette technische Beratung, über den Bau von Serienwerkzeugen bis hin zu einem erfolgreichen und termingerechten Produktionsablauf. Nutzen Sie unser Wissen und unsere Ideen, um ihren zukünftigen Produkten aus Biokunststoffen einen spürbaren Marktvorsprung zu sichern.
Unsere Experten beraten Sie gerne.
Jakob Winter GmbH
Graslitzer Straße 10
64569 Nauheim, Germany
Tel.: 06152 63 07 0
Fax: 06152 63 07 77
E-Mail: [email protected]
Web: www.jakob-winter.de
Halle / Stand 6/B28
Wir als universitärer Fachverlag, stehen bundesweit in enger Kooperation mit verschie-dene Universitäten, Verbänden und auch Institutionen.
Durch diese Zusammenarbeit entstehen hochwertige Publikationen, die entweder regelmäßig oder nach Freigabe des Auftraggebers / Kooperationspartners erscheinen. Diese berichten über aktuelle Forschungsarbeiten der Universität, des Verbandes bzw.des Instituts oder behandeln einen bestimmten Themenschwerpunkt.
“Jahresmagazin Ingenieurwissenschaften Deutschland - Werkstofftechnologie“ALPHA Informationsgesellschaft mbHFinkenstraße 10
68623 Lampertheim, Germany
Tel.: 06206 939-0
Fax: 06206 939-251
E-Mail: [email protected]
Web: www.alphapublic.de
Halle / Stand 6/C30 Media Pavilion
111
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsJia - Jos
J
JOST CHEMICALS, der Spezialist in der Entwicklung und Herstellung von Trennmitteln ist auf dem internationalen Markt Ihr Partner in allen Bereichen der kunststoffverar-beitenden Industrie. Unsere einzelnen Geschäftsbereiche sind die Trennmittel-Techno-logie, Korrosionsschutz, Reinigungs- und Schmierstoffherstellung, sowie Spezialche-mikalien. Die Entwicklung und Produktion in unserem eigenen Hause, garantiert Ihnen schnelle Entscheidungswege,kurze Lieferzeiten sowie faire Preise bei gleich bleibend höchster Qualität. Die Betreuung, Anwendungsberatung und die individuelle Problem-lösung für Sie „Vor Ort“ sind eine der Stärken von JOST CHEMICALS, ebenso wie unsere stetige Entwicklung und Erweiterung des Produktsortimentes.
Jost Chemicals GmbH
Gottlieb-Daimler-Str. 10
69514 Laudenbach, Germany
Tel.: 0620 142810
Fax: 0620 145590
E-Mail: [email protected]
Web: www.jost.chemicals.de
Halle / Stand 4/E30
Die Fa. Gottfried Joos ist einer der führenden Hersteller für hydraulische Pressen und Vakuumtische für die Verarbeitung von Compositewerkstoffe. Als mittelständischesinnovatives Unternehmen entwickeln und produzieren wir unsere Produkte für Kundenaus unterschiedlichen Bereichen wie Automobilbau, Flugzeugbau, Caravanbau und der Holzindustrie.
Gottfried Joos MaschinenfabrikGmbH & Co. KGLangestr. 41
72285 Pfalzgrafenweiler, Germany
Tel.: 07445 184 0
Fax: 07445 184 50
E-Mail: [email protected]
Web: www.joos.de
Halle / Stand 6/F45
Johns Manville, a Berkshire Hathaway company (NYSE: BRK.A, BRK.B), is a leadingmanufacturer and marketer of premium-quality products for building insulation, me-chanical insulation, commercial roofing, and roof insulation, as well as fibers and non-wovens for commercial, industrial and residential applications. JM serves markets that include aerospace, automotive and transportation, air handling, appliance, HVAC, pipe and equipment, filtration, waterproofing, building, flooring, interiors and wind energy.In business since 1858, the Denver-based company has annual sales of approximately $2.5 billion and holds leadership positions in all of the key markets that it serves. JM employs approximately 7,000 people and operates 45 manufacturing facilities in NorthAmerica, Europe and China. Additional information can be found at www.jm.com.
Johns Manville Slovakia AS
Strojarenska 1
Trnava 91799, Slovakia
Tel.: 00421 33 5918 840
Fax: 00421 33 5918 502
E-Mail: [email protected]
Web: www.jmfibers.com
Halle / Stand 6/B11
Jiangsu Jiuding New Material Co., Ltd was created in 1972 covering an area of 200000 m2 with around 1500 workers, which listed in Shenzhen stock exchange in 2007 as anindependent listed company in our industry. Meanwhile it is certified with ISO9001,ISO14001 and OHSAS18001 with over 30 patents named as national key high-tech andAAA Grade Company.
It is specialized in manufacturing and selling fiberglass and FRP products with good quality, timely delivery and good after-sales service. Products range from fiberglass fabric, to FRP molded grating, pultrusion profile, centrifugal lighting pole, filament winding tank, hand lay up flowerpot and automobile parts, as well as FRP nacelle,wind turbine blade etc. Most products are for export to over 50 countries, including USA, Europe, Southeast Asia, etc, with large number of loyal customers.
We wish to seek development sincerely together with you.
Jiangsu Jiuding New Material Co Ltd.
No.1, Zhongshan Road, Rugao City
Rugao City JNGS 226500, China
Tel.: 0086 513 80695298
Fax: 0086 513 87632115
E-Mail: [email protected]
Web: www.jiudinggroup.com
Halle / Stand 6/B36h
112
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsKai - Kar
K
Karlsruher Institut für Technologie (KIT)Karlsruhe Institute of Technology (KIT)Kaiserstr. 12
76131 Karlsruhe, Germany
Tel.: 0721 608 0
Fax: 0721 608 4290
E-Mail: [email protected]
Web: www.kit.edu
Halle / Stand 6/G37
KARL MAYER Composite Parts is a new department of KARL MAYER Textilmaschinenfa-brik GmbH. The family-owned company is the world leader in producing warp knitting machines and warp preparation systems. Since 2007 structural components made of carbon have been introduced to overcome the well known drawbacks of metals. For this purpose, a new manufacturing facility with innovative manufacturing methodswas developed. Over the years, KARL MAYER Textilmaschinenfabrik GmbH has becomean expert in hybrid and FRP designs with high strength bondings. Especially thereliable manufacturing process of composite parts with an extensive knowledge of thematerial was the key to success. KARL MAYER Composite Parts offers these experiencesto customers with main emphasis on machine components. KARL MAYER‘s roots in mechanical engineering makes it a reliable FRP designer from development to mass production.
Karl Mayer Textilmaschinenfabrik GmbH
Brühlstr. 25
63179 Obertshausen, Germany
Tel.: 0049 61044021836
Fax: 0610 4402731583
E-Mail: [email protected]
Web: www.karlmayer.de
Halle / Stand 4/B04
Kaneka Belgium is an affiliate of the Kaneka Corporation group of companies, headquartered in Osaka and Tokyo, Japan. Kaneka Belgium was founded in 1970 as the first Japanese chemical production unit inEurope and has 3 production units operational: Performance Polymers, Eperan and Li-quid Polymers. We supply intermediates for the manufacturing of products in a varietyof industries, including the environmental and energy sector, automotive, construction, information and telecommunication. Our innovative products help improving the qua-lity of life and comfort of people and contribute to a healthier ecosystem.
As organization we continuously invest in the development of new products withadded value that improve quality of life. Kaneka Belgium strives to develop, produce and sell innovative, environment-friendly, chemical specialty products in harmony with society and environment and in line with corporate strategies, providing added value to our customers and stakeholders.
Kaneka Belgium NV
NIjverheidsstraat 16
2260 Westerlo-Oevel, Belgium
Tel.: 0032 14257874
Fax: 0032 14257887
E-Mail: [email protected]
Web: www.kaneka.be
Halle / Stand 4/F36
Als Spezialist in der Personalbeschaffung bietet die Kaiser Stähler Rekrutierungsbera-tung den Kunden individuelle und umfassende Lösungen in der operativen und strate-gischen Rekrutierung von Spitzenkräften auf allen Hierarchieebenen. Der Schwerpunkt der Aktivitäten liegt im Umfeld der produzierenden Industrie mit einem großen Anteilvon Herstellern im Chemie-, Kunststoff- und Metallbereich.
Über unterschiedliche Netzwerkpartner stellt die Kaiser Stähler Rekrutierungsberatungkundenspezifische Lösungen in allen anderen Bereichen des Human Resources, nationalwie international, zur Verfügung.
Kaiser Stähler Rekrutierungsberatung GmbH
Herzog-Adolph-Str. 5
61462 Königstein, Germany
Tel.: 06174-9619-0
Fax: 06174-9619-190
E-Mail: [email protected]
Web: www.ks-recruiting.de
Halle / Stand 6/Gallery
113
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsKau - Kel
K
Die KELHEIM FIBRES GmbH ist der weltweit führende Hersteller von Viskose-Spezial-produkten. In unserem Werk in Kelheim, Niederbayern entwickeln und produzieren wir - mit Hilfefortschrittlicher Technologien und auf Basis nachwachsender Rohstoffe - innovative Lösungen für unterschiedlichste Anwendungsgebiete. Die sich hieraus ergebende, besondere Verpflichtung zu aktivem Umweltschutz ist eine Selbstverständlichkeit, diewir gern und mit Erfolg erfüllen. Unsere Kunden schätzen nicht nur unsere fachkundige technische Unterstützung, sondern gerade auch den herausragenden Service. Darum legen wir großen Wert auf Entwicklungsprojekte mit unseren Partnern und bringen im Rahmen der gemeinsamenBemühungen hochmoderne Pilotanlagen mit ein, mit denen wir in der Lage sind Pro-duktionsbedingungen unserer Kunden maßstabsgetreu nachzustellen. Von Hightech-Bekleidung über Hygieneprodukte bis hin zu Spezialpapieren – Herstellerverschiedenster Endprodukte vertrauen auf die Zusammenarbeit mit uns.
Kelheim Fibres GmbH
Regensburger Straße 109
93309 Kelheim, Germany
Tel.: 09441 99-623
Fax: 09441 99-568
E-Mail: [email protected]
Web: www.kelheim-fibres.com
Halle / Stand 6/E36
Keim ist Ihr Profi in der Herstellung von Produkten aus faserverstärkten Kunststoffen (Duroplaste). Wir haben uns auf die Fertigung von GFK- und CFK-Bauteilen im Resin Transfer Moulding (RTM) spezialisiert. Als Entwicklungslieferant unterstützt Keim Sie von der Idee bis zur Fertigung bei allen Schritten:Desingentwurf KonstruktionFormenbau PrototypenbauVorserieSerienfertigung kompletter Baugruppen
Wir bringen Ihre Ideen in Form.
Keim Kunststofftechnik GmbH
Im Rivoir 15
75446 Wiernsheim-Pinache, Germany
Tel.: 07041 937270
Fax: 07041 937275
E-Mail: [email protected]
Web: www.keim-fasertechnik.de
Halle / Stand 6/A10
Kegelmann Technik, das ist Kompetenz und Know-how über die gesamte Prozesskette hinweg – von der ersten Skizze bis zum fertigen Produkt.
Wir entwickeln und produzieren Prototypen und Kleinserien in Metall und Kunststoff. Mit einem Team hoch qualifizierter Spezialisten, die Ideen in erfolgreiche Produkte umsetzen. Kegelmann Technik – Ihr Partner für den Vorsprung im Wettbewerb. Flexibel und schnell. Präzise und professionell.
KEGELMANN TECHNIK GmbH
Gutenbergstr. 15
63110 Rodgau/Jügesheim, Germany
Tel.: 06106 8507 0
Fax: 06106 8507 55
E-Mail: [email protected]
Web: www.ktechnik.de
Halle / Stand 4/A14
KauPo Plankenhorn e.K.
Max-Planck-Str. 9/3
78549 Spaichingen, Germany
Tel.: 07424 95842 3
Fax: 07424 95842 55
E-Mail: [email protected]
Web: www.kaupo.de
Halle / Stand 4/B40
114
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsKel - Kik
K
„KI - Kunststoff Information“ ist seit 1971 eine der erfolgreichsten Informations-quellen für die europäische Kunststoffindustrie und hat die höchste Anzahl bezahlter Abonnements aller entsprechenden Publikationen. In einem wöchentlichen gedruckten Newsletter und täglich auf der Website veröffentlicht KI entscheidungswichtige Busi-ness-Informationen zu Märkten, Unternehmen, Produkten, Branchen und Preisen.
Bei dem Thema „Kunststoffpreise“ nimmt KI seit über 20 Jahren eine führende Position ein. Mit einem einzigartigen Netzwerk aus Produzenten, Distributeuren/Händlern und Verarbeitern hat KI engen Kontakt zu vielen Hundert Marktteilnehmern, um Preis- und Marktdaten zu ermitteln. Die KI-Preisindizes sind industrieweit akzeptiert und in die Gleitklauseln unzähliger Lieferverträge eingebunden. Mehr als 5.000 europäische Unternehmen vertrauen den Daten und Berichten von KI.
Weitere Informationen finden Sie unter www.kiweb.de
“KI - Kunststoff Information“Kunststoff Information Verlags-gesellschaft mbHSaalburgstr. 157
61350 Bad Homburg, Germany
Tel.: 06172 9606 0
Fax: 06172 9606 99
E-Mail: [email protected]
Web: www.kiweb.de
Halle / Stand 6/C30 Media Pavilion
Die KERAMISCHE ZEITSCHRIFT ist eine deutschsprachige technisch-wissenschaftliche Fachzeitschrift, die das gesamte Gebiet der keramischen sowie thematisch verwandterTechnologien behandelt: Sanitär-, Geschirr- und Dekorkeramik, Grobkeramik & Bau-materialien (Bau- und Dachziegel), Fliesen, technische Keramik, Struktur- und Funkti-onskeramik, Pulvermetallurgie, feuerfeste Werkstoffe, Glas und keramische Verbund-werkstoffe – von der Rohstoffgewinnung & Aufbereitung (Trocknen, Brennen, Mahlen,Mischen, Granulieren, Agglomerieren etc.) über Formgebung, Oberflächenbehandlung bis hin zu Charakterisierung, Fertigung, Anwendung und Recycling.
“Keramische Fachzeitschrift“Expert Fachmedien GmbHAachener Str. 172
40223 Düsseldorf, Germany
Tel.: +49 211 1591 210
Fax: +49 211 1591 150
E-Mail: [email protected]
Web: www.keramische-zeitschrift.info
Halle / Stand 6/C30 Media Pavilion
KEM ist das Fachmagazin für Konstrukteure und Entwicklungsingenieure mit Innova-tionsverantwortung, Technischen Lösungs- und Optimierungsaufgaben, Planungsver-antwortung und Entscheidungskompetenz, vorwiegend in den Branchen Maschinenbau und Elektrotechnik. Fachinformationen zu Antriebstechnik, Automatisierung, Maschinenelemente,Elektrotechnik/ Elektronik, Fluid-, Mess- und Verbindungstechnik sowie Werkstoffe/Verfahren und CAD/CAE unterstützen die Konstruktionsabteilungen zuverlässig bei dentäglichen Herausforderungen. KEM beobachtet Marktentwicklungen, spürt Trends und Innovationen auf, vermittelt Wissenswertes über neue Technologien und Verfahren.Hintergrundwissen und Lösungsansätze unterstützen das technische Management beiEntscheidungsprozessen im Unternehmen.Ergänzt wird das Informationsangebot mit dem 14-tägig erscheinenden Newsletter „Konstruktions-News“ und laufend aktuelle Meldungen auf www.kem.de
“KEM Konstruktion Entwicklung Management“Konradin Verlag R. Kohlhammer GmbHErnst-Mey-Str. 8
70771 Leinfelden/Echterdingen, Germany
Tel.: +49 711 7594-436
Fax: +49 711 7594-1436
E-Mail: [email protected]
Web: www.kem.de
Halle / Stand 6/C30 Media Pavilion
Kelteks d.o.o. is a weaving manufacture company, established in 1990, which produces a variety of technical textile products made of glass, carbon, AR and basalt fibers … Thanks to a strong orientation towards quality and constant development, Kelteks is today recognized as a brand name in weaving business.
There are two main divisions: Composite reinforcement production
This particular division produces fabrics for composite market such as woven rovings, glass yarn fabrics, combi-mat products, unidirectional fabrics, needled woven roving products. Glass fibre meshes production
This division specializes in the production of reinforcement meshes made of glass, AR glass, carbon and basalt . High-quality innovative reinforcements are developed within a special segment of the company - CRS by Kelteks, which provides solutions in the particular field of concrete reinforcement.
Kelteks d.o.o. tvornice tekstila
Mala Svarca 155
Karlovac 47000, Croatia
Tel.: 00385 47 434410
Fax: 00385 47 434411
E-Mail: [email protected]
Web: www.kelteks.hr
Halle / Stand 4/D13
115
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsKli - Kon
K
Konstruktionspraxis - Alles, was der Konstrukteur braucht
Als Spezialist für Entwickler und Konstrukteure im Maschinen-, Apparate-und Fahr-zeugbau, in der Elektrotechnik und in weiteren metall- und kunststoffverarbeitenden Industriezweigen bedient konstruktionspraxis seit mehr als 20 Jahren inhaltlich alle Phasen des Konstruktionsprozesses. Von der Digitalen Konstruktion über die Auswahl von Werkstoffen und Konstruktionsbauteilen bis hin zum Einsatz von Komponenten ausder Verbindungs-, Fluid- und Antriebstechnik, der Automatisierung und der Elektro-technik.
“Konstruktionspraxis“Vogel Business Media GmbH & Co. KGMax-Planck-Str. 7/9
97082 Würzburg, Germany
Tel.: +49 931 418 0
Fax: +49 931 418-22 80
E-Mail: [email protected]
Web: www.konstruktionspraxis.de
Halle / Stand 6/C30 Media Pavilion
Die im Jahre 1897 gegründete KÖMMERLING CHEMISCHE FABRIK GMBH mit Sitz in Pirmasens, Deutschland, ist ein international führender Hersteller von qualitativ hochwertigen Kleb- und Dichtstoffen. Technisches Know How verbunden mit modernenProduktionsverfahren ermöglichen die Entwicklung und Fertigung der leistungsfähigen Produktpalette nach dem neuesten Stand der Technik. Seit mehr als 115 Jahren steht der Name KÖMMERLING nicht nur für hochwertige Kleb- und Dichtstoffe, basierend auf PIB, Polyurethan, Silikon und MS-Polymer sondernvor allem für einen hohen Grad an Qualität, Service und Anwendungs-Know-How. Durch die Erarbeitung individueller und kundenorientierter Problemlösungen, präsen-tiert sich KÖMMERLING heute als bedeutender Systemlieferant für die Marktsegmente Glas, Transport, Speciality Construction/Industrie und Erneuerbare Energie.
KÖMMERLING CHEMISCHE FABRIK GMBH
Zweibrücker Str. 200
66954 Pirmasens, Germany
Tel.: +49 6331 56 2000
Fax: +49 6331 56 1999
E-Mail: [email protected]
Web: www.koe-chemie.de
Halle / Stand 4/D24
Manufacturer of Kenylon and Kenylene vacuum bagging films for autoclave and infusi-on processes for curing composite products. Offer a full range of heat stabilized films of nylon and polyethylene films for autocla-ving composite processes from 50mm to 3175mm.
KNF FLEXPAK CORPORATION
734 West Penn Pike
Tamaqua PA 18252, United States
Tel.: +1 570 386 3550
Fax: +1 570 386 3703
E-Mail: [email protected]
Web: www.knfcorporation.com
Halle / Stand 6/G39d
Klieverik Heli BV, has been active for over 45 years as a designer of innovative systems and stand-alone units for coating & laminating, finishing, fusing, heat setting, thermobonding and dye- sublimation. At Composites - Europe, the latest developments in technique for the production of thermo plastic composites will be demonstrated. Systems to produce multi- layerlaminated prepregs or pre- impregnated material for the production of composites. Klieverik systems are suitable to integrate applications with either thermoplastic filmsor powder.
Klieverik’s specialism is engineering and manufacturing complete lines who meet the specific requirements of customers in various industries such as automotive, aircraft, technical textiles etc. With many years of experience and know-how, Klieverik is the reliable partner to help your new ideas giving shape.
Klieverik Heli B.V.
Edisonstraat 8
7575 AT OLDENZAAL, The Netherlands
Tel.: +31541511155
Fax: +31541520545
E-Mail: [email protected]
Web: www.klieverik.com
Halle / Stand 4/F11
116
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsKra - Kru
K
Advancing Surface Science – das ist Anspruch und Ziel von KRÜSS. Seit über 50 Jahren vertiefen KRÜSS-Instrumente das Wissen über Ober- und Grenzflächen flüssiger und fester Stoffe. Das Portfolio umfasst alle wichtigen Techniken zur statischen unddynamischen Messung der Ober- und Grenzflächenspannung sowie neuartige Geräte und Methoden zur Untersuchung flüssiger Schäume. Anspruchsvolle und vollautoma-tische Instrumente für Forschung, Entwicklung und Qualitätskontrolle sind ebenso im Programm wie Basisgeräte für schulische Zwecke. Entwicklung auf der Höhe der Zeit,Präzisionsarbeit unserer Fertigung, ein professionelles Labor für Auftragsmessungen, weltweiter Vertrieb und Kundendienst sowie ein Netzwerk des Know-how-Transferssichern die Marktführerschaft von KRÜSS auch für die Zukunft.
Weitere Informationen finden Sie auf unserer Internetseite www.kruss.de.
KRÜSS GmbH Wissenschaftliche Laborgeräte
Borsteler Chaussee 85-99a
22453 Hamburg, Germany
Tel.: +49 (40) 514401-0
Fax: +49 (40) 514401-98
E-Mail: [email protected]
Web: www.kruss.de
Halle / Stand 4/E26
FASERVERBUNDWERKSTOFFE: Prepreg-Systeme mit duroplastischen und thermoplasti-schen Harzen; Bauteile; Filament-Winding-Rohre; Pultrusiosprofile; Kunststoffplat-ten. FIBRE COMPOSITES: Prepreg-systems with thermosetting and thermoplastic resins; FRP parts; Filament windings; Pultruded plastic profiles; Plastic sheets.
KREMPEL GmbH
Papierfabrikstr. 4
71665 Vaihingen/Enz, Germany
Tel.: 07042 915 0
Fax: 07042 159 85
E-Mail: [email protected]
Web: www.krempel-group.com
Halle / Stand 4/D10
Pressen, Stanzen, flexible Schneidsysteme und Schäumwerkzeuge (Tooling Techno-logies); Maschinen und Systeme zur Verarbeitung von Polyurethanen und anderen reaktiven Materialien, die verschiedenartige Treibmittel benutzen. Systemkomponen-ten: Hochdruck-Reaktionssysteme, Niederdruck-Reaktionssysteme, Dosiermaschinen,Vormischeinheiten für Pentan, Transportsysteme (z. B. Rundtischanlagen, Förderstraßen und dergleichen), Formträger, Mischköpfe und Mischkopf-Manipulatoren. Systeme für Spezialverarbeitungen: z.B. LFI - Langfaser-Technologie, NFI - Naturfaser Technologie, CCM – Clear Coat Moulding, PSM – PUR Spray Moulding, R-RIM - Reaktions-Spritz-gießverfahren für verstärktes Material, S-RIM - Strukturschaumgießen, RTM-Verfahren(Harz Transferpressen), Rotationssintern und Regenerierung. Spritzgießmaschinen für Thermoplaste, Duroplaste, Elastomere. Automationslösungen. Ein- und Zweischne-ckenextruder, komplette Extrusionslinien zur Compoundierung und Herstellung von Rohren, Profilen, Platten
KraussMaffei Technologies GmbH
Krauss-Maffei-Str. 2
80997 München, Germany
Tel.: 089 88 99 0
Fax: 089 88 99 22 06
E-Mail: [email protected]
Web: www.kraussmaffei.com
Halle / Stand 6/C08
Gummiwerk KRAIBURG GmbH & Co. KG ist einer der führenden Spezialisten für techni-sche Elastomer-Mischungen. KRAIBURG produziert hochwertige Compounds auf Basis aller verfügbaren Kautschuksorten, inklusive Fluor- und Festsilikonkautschuken, sowohl für standardisierte, als auch spezielle Verarbeitungsverfahren der Gummiindustrie. Der Fokus wird dabei auf die kundenindividuellen und maßgeschneiderten Anwendungen sowie innovative Produkte gelegt. Zusammen mit den Kunden wird dabei die für die jeweilige Anwendung und Verarbeitungsmethode optimale Mischung konzipiert.
KRAIBON, die Integration von Elastomeren in FVK-Bauteile kann in einem Prozess-schritt-Verfahren dargestellt werden. KRAIBON, welches ausgezeichnete Haftungs-werte zeigt, wird dabei gemeinsam mit dem Harz vernetzt. Das entstehende Hybrid-material zeigt hervorragende Akustikeigenschaften und verbessert das Impact- und Spliiterverhalten von FVK-Bauteilen.
Gummiwerk KRAIBURG GmbH & Co. KG
Teplitzer Str. 20
84478 Waldkraiburg, Germany
Tel.: 08638 61 0
Fax: 08638 61 310
E-Mail: [email protected]
Web: www.kraibon.com
Halle / Stand 6/B04
117
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsKsl - Kue
K
Die KÜNDIG AG ist ein führender Hersteller von Schleifmaschinen für die Flächen- und die Kantenbearbeitung
Produziert wird in den Werken am Hauptsitz in CH-Wetzikon und in D-Gotha.
Ursprünglich nur im Holzbereich tätig, hat sich KÜNDIG in den letzten Jahren auch sehr intensiv und erfolgreich im Kunststoff- und Metallbereich etabliert.
Kundenspezifische Probleme werden von den Technikern in funktionierende Lösungen umgesetzt
KÜNDIG GmbH
Kindleber Str. 268
99867 Gotha, Germany
Tel.: 0041434773001
Fax: 0041434773009
E-Mail: [email protected]
Web: www.kundig.com
Halle / Stand 6/A26
F.A. Kümpers – Textile Kompetenz vor!
Als Anbieter technischer Garne und Gewebe hat die F.A Kümpers GmbH & Co. KG sich seit Jahren als kompetenter und verlässlicher Partner für die Entwicklung und Produk-tion textiler Lösungen etabliert. In der Business Unit Composite Textiles bieten wir Ihnen maßgeschneiderte Produktesowie ganzheitliche Entwicklungspotentiale in folgenden Bereichen:
Hybridgarne und –Zwirne Verstärkungsgewebe Textile Hilfsmittel Technische Veredlung und Konfektion
F.A. Kümpers GmbH & Co. KG
Basilika-Str. 22-30
48429 Rheine, Germany
Tel.: 05971 861 0
Fax: 05971 861 204
E-Mail: [email protected]
Web: www.kuempers.de
Halle / Stand 6/E36
Die KS-Präzisionstechnik GmbH & Co.KG hat sich seit der Gründung als Einzelunter-nehmen im Jahr 2004 erfolgreich entwickelt und sich als Systemdienstleister rund umden Werkzeug- und Formenbau sowie als Problemlöser f. Handhabungs- und Automati-sierungstechnik etabliert. Zahlreiche Kunden aus den Bereichen
vertrauen seitdem auf unser Know - How und unsere innovativen u. kreativen Lösungen. Mit der elaxa®-Akkuschere stellen wir eine eigene, neuartige, extrem leistungsfähige, leichte und geräuscharme Schneidlösung vor.Verschiedene Klingenformen, wählbare Ausbaustufen und ein eigenes innovatives Antriebskonzept machen die elaxa®-Akkuschere zu einem modernen Systemwerkzeugfür sowohl mobile als auch stationäre Anwendungen in verschiedenen Industrie- und Gewerbezweigen. Wir präsentierten eine weitere Version der elaxa®-Akkuschere.Wir zeigen Ihnen die elaxa® als Automatisierungslösung.
KS-Präzisionstechnik GmbH & Co. KG
Esenser Straße 139
26607 Aurich, Germany
Tel.: 04941 6981243
Fax: 04941 6981244
E-Mail: [email protected]
Web: www.elaxa.de
Halle / Stand 6/F16
Solider Maschinenbau gepaart mit Ideenreichtum und viel Aufgeschlossenheit für Neues, dazu der Einsatz modernster Elektronik und Steuerungstechnik – das sind dieGrundlagen des Erfolges der KSL Keilmann Sondermaschinenbau GmbH in Lorsch. Wirsind Hersteller innovativer Nähsysteme und Automatisierungstechniken zur Verarbei-tung technischer Textilien, vor allem in den Segmenten Airbag, Automotive, Faserver-bundwerkstoffe, textile Filtertechnik, Matratzen und Sicherheitstechnik.
Genuine engineering, coupled with inventiveness and open-mindedness for innova-tions, together with making use of the latest electronic and control technique – this isthe basis for the success of KSL Keilmann Sondermaschinenbau GmbH Lorsch. We aremanufacturer of innovative stitching systems and automation technique for processingtechnical textiles, in particular for the segments airbag, automotive, composites, texti-le filter technique, mattresses and safety engineering.
KSL Keilmann Sondermaschinenbau GmbH
Bensheimer Str. 101
64653 Lorsch, Germany
Tel.: 0625196200
Fax: 06251962026
E-Mail: [email protected]
Web: www.keilmann-group.de
Halle / Stand 6/G08
118
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsKun - Kvt
K
KVT Fastening, a Bossard Company, is an internationally well-known specialist for high-quality fastening and sealing applications for the electronics and energy sector,the automobile and transportation industries, aviation and aerospace, engineering and construction, precision engineering and medical technologies, High –performancesolutions of KVT are found product wherever absolutely safe and secure connectionsare essential. KVT Fastening does not only offer a wide product portfolio of leading manufacturers, but also provides individual consulting services and many years of experience in the search for ideal solutions, for its customers. This portfolio is completed by a rangeof innovative tools and machines as well as if the integration into automated, serial production workflows. With over 85 years of engineering experience, solution-oriented expertise, as wellas unique development and consulting skills, KVT Fastening stands for best-in-classreliability.
KVT-Fastening AGA BOSSARD COMPANYLagerstrasse 8
8953 Dietikon/Zürich, Switzerland
Tel.: +41 44 743 33 33
Fax: +41 44 740 65 66
E-Mail: [email protected]
Web: www.kvt-fastening.ch
Halle / Stand 6/E34
KURIS bietet heute eines der breitesten Produktprogramme für Lege- und Zuschneide-technologie an.Gleichzeitig stellt KURIS ein hohes Erfahrungpotenzial mit mehr als 10.000 Installatio-nen weltweit. Entwicklung, Konstruktion und Maschinenbau erfolgen auf dem neusten Stand der Technik. So entstehen Lösungen aus einer Hand, die sich durch hohe Qualitätdes Maschinenbaus und moderne Steuerungstechnik auszeichnen. Die entsprechendenSoftware-Lösungen werden ebenfalls im eigenen Haus mit entwickelt. Das umfassende Produktprogramm ermöglicht individuelle Lösungen, die gezielt auf die organisatori-schen Vorraussetzungen und örtlichen Gegebenheiten beim Kunden abgestimmt sind.
KURIS Spezialmaschinen GmbH
Degginger Straße 6
73326 Deggingen/Reichenbach, Germany
Tel.: 07334 924 80 0
Fax: 07334 924 80 69
E-Mail: [email protected]
Web: www.kuris.de
Halle / Stand 6/G07
Die SIGWERB GmbH ist ein spezialisiertes Medienunternehmen, deren Tätigkeitsgebiete sich auf die folgenden Bereiche konzentrieren:Herausgabe von eigenen Verlagsobjekten mit multimedialer Vernetzung Die erfolgreiche Lancierung und Entwicklung von Medienkonzepten gehört zu denKernkompetenzen unseres Unternehmens. Dabei steht das optimale Zusammenspiel von verlegerischem Wissen, langjähriger Erfahrung und detaillierten Branchenkennt-nissen im Mittelpunkt unserer Tätigkeiten. Nebst der Herausgabe von gedruckten Fachzeitschriften als Basismedium legen wir einen Schwerpunkt auf die begleitenden Online-Services, um eine multimediale Vernetzung sicherzustellen. Vertretung von externen Verlagsobjekten im Anzeigenmarketing: Eine fundierte und langjährige Erfahrung im Verkauf von Anzeigenwerbung, gepaartmit vielen Ideen und überdurchschnittlichem Einsatzwillen, gewährleisten unserenVerlagspartnern eine professionelle und erfolgsorientierte Marktbearbeitung für ihre Publikationen.
“KunststoffXtra“SIGWERB GmbHUnter Altstadt 10
6301 Zug, Switzerland
Tel.: +41 34 423 35 61
E-Mail: [email protected]
Web: www.kunststoffxtra.com
Halle / Stand 6/C30 Media Pavilion
Kunshan Detai Metal Technology Co.,Ltd
No. 118 Juxiang Road ZhangPu Town
Kunshan City JNGS 215321, China
Tel.: +86 512 50105200
Fax: +86 512 50103200
E-Mail: [email protected]
Web: www.dtpowder.com
Halle / Stand 6/B36c
119
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsKze - Lan
L
Das Unternehmen Langzauner Gesellschaft m.b.H. überzeugt seit 1924 Kunden auf der ganzen Welt durch ihre hohe Qualität, Flexibilität und Kundenorientierung. Die Schwerpunkte liegen dabei in der Entwicklung und Fertigung von CompositePressen.
Unser Leistungsspektrum umfasst:
- Formträgerpressen- Laborpressen- Prüf- u. Stanzpressen
egal welches Fertigungsverfahren sie Anwenden, wir sind der richtige Ansprechpartner für Sie.
Mehr Informationen finden sie unter www.langzauner.at
Langzauner GmbH
Lambrechten 52
4772 Lambrechten, Austria
Tel.: 0043 776 5231 0
Fax: 0043 776 5231 85
E-Mail: [email protected]
Web: www.langzauner.at
Halle / Stand 6/B20
Polyester-, Epoxid- und Polyurethanharze sind unser Geschäft: Das gesamte Rohma-terial, sämtliche Verstärkungsfasern aus Glas, Kohle und Aramid, alle gängigen und speziellen Zusatzstoffe und Hilfsmittel für die professionelle Kunstharzverarbeitungstehen auf unserem Lieferprogramm. Und dank enger vertraglicher Bindung an die Her-steller sind die einzelnen Produkte perfekt aufeinander abgestimmt. Qualität wird groß geschrieben:Als Fachvertrieb für Hersteller faserverstärkter Kunststoff-Formteile informieren wir unsere Kunden stets über die aktuellen technischen Entwicklungen, beraten kompetent und zuverlässig über Eigenschaften und Einsatzmöglichkeiten und geben das techni-sche Know-how unserer Lieferanten aktuell weiter. Unsere Mitarbeiter sind erfahren und helfen gerne mit Rat und Tat.
Lange+Ritter GmbHFaserverstärkte KunststoffeDieselstr. 25
70839 Gerlingen, Germany
Tel.: +49 7156 2006 0
Fax: +49 7156 2006 999
E-Mail: [email protected]
Web: www.lange-ritter.de
Halle / Stand 4/D29
LAMILUX Composites GmbH ist ein über 100 Jahre altes Familienunternehmen und verfügt über eine fast 60-jährige Markt- und Produktionserfahrung in der Herstellungglas- und kohlefaserverstärkter Kunststoffe. Wir beliefern rund um den Globus Kunden aus den Bereichen Fahrzeug-, Wohnmobil- und Caravanbau, Kühlhaus- und Kühlzellenbau, der Bauindustrie sowie zahlreicher weiterer Industriesegmente mit faserverstärkten Bahnen oder Rollen.
www.lamilux.de
LAMILUX Composites GmbH has been a family-run business for over 100 years and looks back at nearly 60 years of market and production experience in the manufacture of glass- or carbonfiber reinforced composites. We supply customers around the globein a wide range of sectors, such as the automotive and recreational vehicle industries,refrigerated store room and cell construction, the construction industry and manyother industrial sectors involved in fiber-reinforced sheets or rolls.
www.lamilux.com
LAMILUX Composites GmbH
Zehstraße 2
95111 Rehau, Germany
Tel.: 0049 9283 595 0
Fax: 0049 9283 595 290
E-Mail: [email protected]
Web: www.lamilux.de/faserverstaerkte-kunststoffe.html
Halle / Stand 6/B04
“K-Zeitung“Giesel Verlag GmbHBüro Hannover Hans-Böckler-Allee 9
30173 Hannover, Germany
Tel.: 0511 7304-142
Fax: 0511 7304-157
E-Mail: [email protected]
Web: www.giesel.de
Halle / Stand 6/C30 Media Pavilion
K
120
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsLan - Lef
L
Wir verfolgen das Ziel mit innovativen Produkten und anwendungstechnischer Bera-tung die uns gestellten Aufgaben zu erfüllen.Eine auf Vertrauen basierende Zusammenarbeit mit Kunden und Partnern ist uns dabei besonders wichtig.Lassen Sie uns Ihre Wünsche und Fragen wissen, gerne beraten wir Sie ausführlich.
Produktion von Dispersionen, Emulsionen, Lohnfertigungen, Compounds, Mischungen, sowie Lohnfertigungen für Fremdfirmen nach deren Rezepturen. Entwicklungen undMitarbeit von staatlich geförderten Projekten mit Universitäten, Fachhochschulen und Prüfinstituten. Mitarbeit und Mitglied des TUDALIT Markenverbandes (Textilbetonbau).
Lefatex-Chemie GmbH
Stiegstr. 64
41379 Brüggen-Bracht, Germany
Tel.: 02157 8789 0
Fax: 02157 8789 19
E-Mail: [email protected]
Web: www.lefatex.de
Halle / Stand 6/E36
LAUFFER Pressen stands for progress as well as tradition. Foulded in 1872, our familybusiness has been making hydraulic presses since 1927. Thousands of Lauffer systems are used around the world.
Our Product lines includes: Lamination Technology, Plastics Technology, Metal FormingTechnology, Powder Metal Technology, Encapsulation Technology Products: VACCUM Moulding, RTM, RESIN TRANSFER MOULDING, COMPRESSION MOULDING, BMC, SMC, CONTINUOUS LAMINATING.
Vacuum Lamination Systems for PCB industry, Laboratory presses, Card Lamination Systems for production of cards and documents. Lamination Systems for LTCC andceramics, Fast Cycle Lamination Systems. Transport Systems, Storages and Peripheral Stations. Technical competence and „Know How“,are proven ISO 9011 quality, an experienced and responsive service organisation and a highly motivated team of experts on all company levels make us a reliable partner for customers around the world.
Maschinenfabrik Lauffer GmbH & Co.KG
Industriestrasse 101
72160 Horb a. N., Germany
Tel.: +49 7451 902-0
Fax: +49 7451 902-100
E-Mail: [email protected]
Web: www.lauffer.de
Halle / Stand 6/C23
LAP entwickelt und produziert seit 1984 laser-basierte Systeme für die hochpräziseProjektion von Konturen sowie zur berührungsfreien Messung geometrischer Größen. Laserprojektionssysteme erzeugen Punkte, Linien, Kreuze oder beliebig geformteUmrisse, z. B. maßstabsgerechte Formen aus CAD-Daten. Die gut sichtbaren roten oder grünen Laserlinien werden genutzt, um Produkte oder Bauteile zu platzieren oder auszurichten. Ein wichtiger Einsatzbereich liegt in der Fertigung von high-tech Karbonfaserbauteilen in der Luftfahrt- und Fahrzeugindustrie. Der Einsatz vonLaserprojektionssystemen ist auch in anderen Branchen üblich, beispielsweise in der Holzverarbeitung, in der Textilindustrie, in der Reifenindustrie oder bei der Herstellungvon Beton-Fertigteilen und Windkrafträdern. Mit Linienlasern und Laserprojektoren für Industrie und Handwerk nimmt LAP in Euro-pa eine der führenden Positionen ein.
LAP GmbHLaser ApplikationenZeppelinstr. 23
21337 Lüneburg, Germany
Tel.: 04131 951195
Fax: 04131 951196
E-Mail: [email protected]
Web: www.lap-laser.com
Halle / Stand 6/F46
Lantor BV, based in The Netherlands focusses on the development, manufacturing and global marketing of high added value nonwovens for applications in the Composites, Cable, Construction and Special Products industries. The Lantor Composites division offers a comprehensive range of nonwovens solutions for the fibre reinforced plastics industry. In close cooperation with the world‘s leadingend-users and institutes, successive generations of Lantor Mat products have been developed for specific applications in the marine, transportation, construction, leisure,sanitary and aerospace industries.
Lantor B.V.
Verlaat 22 PO Box 45
3900 AA Veenendaal, The Netherlands
Tel.: 0031 318 537111
Fax: 0031 318 537299
E-Mail: [email protected]
Web: www.lantor.nl
Halle / Stand 4/D40g
121
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsLei - Lib
L
LIBA Maschinenfabrik GmbH
Oberklingensporn
95119 Naila, Germany
Tel.: 09282 670
Fax: 09282 5737
E-Mail: [email protected]
Web: www.liba.de
Halle / Stand 6/B04
LIANYUNGANG TIANHONG TUBESINDUSTRY Co., Ltd.
Northern Economic Development Zone, Donghai Co
Lianyungang City JNGS 222300, China
Tel.: +86 518 8776 2118
Fax: +86 518 8776 2777
E-Mail: [email protected]
Web: www.thgype.com
Halle / Stand 6/B36f
Das Leichtbauzentrum Baden-Württemberg ist ein branchenübergreifendes, indust-riegetriebenes Netzwerk namhafter Unternehmen, Hochschulen und Forschungsein-richtungen, die sich im Bereich des systemeffizienten, hybriden Leichtbaus betätigen. Es fördert die Zusammenarbeit auf dem Gebiet der Erforschung, Entwicklung und Herstellung hybrider Leichtbaustrukturen und fungiert als zentraler Ansprechpartnerfür alle Fragen rund um das Thema Leichtbau. Ziel ist es, die Mitglieder durch die Erweiterung ihrer Kompetenzen, durch eine bran-chenübergreifende Vernetzung, durch Know-how-Austausch innerhalb strategischer Allianzen und durch Kooperationen untereinander, darin zu unterstützen, Geschäftspo-tenziale zu erkennen, um kurz- bis mittelfristig Business zu generieren und langfristig die Wettbewerbsfähigkeit zu stärken. Darüber hinaus soll der Standort BW als einer der wirtschaftsstärksten Regionen Europas in seiner Innovationsführerschaft gestärkt und Arbeitsplätze gesichert und ausgebaut werden.
Leichtbauzentrum Baden-Württemberg - LBZ-BW e.V.
Gutenbergring
69168 Wiesloch, Germany
Tel.: 0049 6222 82 3154
Fax: 0049 6222 82 5103
E-Mail: [email protected]
Web: www.lbz-bw.de
Halle / Stand 4/C02
Die Leichtbau BW GmbH wurde gegründet, um Industrie und Forschung in Ba-den-Württemberg bei der Entwicklung des Themas Leichtbau zu unterstützen, durch Vernetzung der Player die Projekt- und Technologieentwicklung voranzutreiben und die Leichtbau-Kompetenz von baden-württembergischer Industrie und Forschung zu vermarkten. Als 100%-ige Tochter des Landes Baden-Württemberg fühlen wir unsstrikter Neutralität verpflichtet.
Wir legen Wert auf Dialog. Besuchen Sie uns an unserem Messestand, oder nehmen Sie teil an unserem (kostenlosen) Messe-Empfang in der Regio-Lounge am 18.9. ab 16.00 Uhr.
Leichtbau BW GmbHLandesagentur für Leichtbau Willi-Bleicher-Straße 19
70174 Stuttgart, Germany
Tel.: +49 711 123-3000
E-Mail: [email protected]
Web: www.leichtbau-bw.de
Halle / Stand C2/B13 HYBRID Expo
122
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsLig - Luc
L
Lucintel is a premier global market research and management consulting firm that creates your equation for growth, whether you need to understand market dynamics,identify new opportunities or increase your profitability. Lucintel’s broad scope of ser-vices help you plan your growth, not only in the markets you should pursue, but alsothe technology and strategy required for success. For more than 14 years, our industry knowledge and expertise has helped thousands of clients create the equation for mea-surable results. Let us create an equation for you that meet your goals.
Lucintel’s core competency is in market research and management consulting. We have hundreds of reports in over 20 industry categories. We also offer a suite of consulting services that empower our customers to increase market share and profitability.
Lucintel
1320 Greenway Drive, Suite 870 Las Colinas
Dallas TX 75038, United States
Tel.: 001 972 636 5056
Fax: 001 877 883 5140
E-Mail: [email protected]
Web: www.lucintel.com
Halle / Stand 6/F44
LORD ist der weltweit führende Hersteller von Gummi-Metallklebstoffsystemen, Elastomer-Beschichtungen für die Auto-mobilindustrie und Luftfahrt. Hier kommen sowohl Lösemittel- als auch wässrige Dispersionsklebstoffe zum Einsatz.
Ein weiterer Schwerpunkt liegt in den Strukturklebstoffen, kaltaushärtendende Me-tallklebstoffe welche z. B. im Bereich der Bördelfalzverklebung zum Einsatz kommen,sowie spezielle Elektronikklebstoffe zum Beschichten, Vergießen oder Kleben elektroni-scher Komponenten
Lord Germany GmbH
Itterpark 8-10
40724 Hilden, Germany
Tel.: +49 2103 25231 0
Fax: +49 2103 25231 99
E-Mail: [email protected]
Web: www.lord.com
Halle / Stand 4/E33
Linn High Therm, Eschenfelden, ist seit 1969 einer der führenden Hersteller von elektrisch beheizten Industrie- und Laboröfen, Probenvorbereitungsanlagen für Spekt-roskopie, Präzisions-Feingießanlagen, Induktions- sowie Mikrowellentrocknungs- und erwärmungsanlagen. V.a. kundenspezifische Sonderanfertigungen gehören zum Liefer-programm. Weltweit gibt es ca. 50 Vertriebs- und Servicevertretungen.
Linn High Therm GmbH
Heinrich-Hertz-Platz 1
92275 Eschenfelden, Germany
Tel.: 09665 9140 0
Fax: 09665 1720
E-Mail: [email protected]
Web: www.linn.de
Halle / Stand 6/G36
Das Fachmagazin Lightweight Design erscheint 6x im Jahr und richtet sich an Entscheider aller Branchen, in denen Massen bewegt werden, u.a. Transport- und Luftfahrtindustrie, Schiffbau, Maschinen und Anlagenbau. Es untersucht den Einsatzvon Leichtbauwerkstoffen und Leichtbaustrukturen zwecks Gewichtsreduzierung undEinsparung von Energie. Die Beiträge berichten über die Umsetzung von Leichtbau-prinzipien bei der Entwicklung und Herstellung neuer Produkte entlang der gesamten Wertschöpfungskette von der Werkstoff- über die Konstruktionstechnik sowie Simu-lations- und Optimierungsverfahren bis hin zur Fertigungstechnik, Qualitätssicherung und zum Recycling. www.lightweight-design.de
“lightweight design“Springer Fachmedien Wiesbaden GmbHAbraham-Lincoln-Str. 46
65189 Wiesbaden, Germany
Tel.: 0611 7878 0
Fax: 0611 7878 412
E-Mail: [email protected]
Web: www.lightweight-design.de
Halle / Stand 4/A04, 6/C30 Media Pavilion
123
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsMaa - Mai
M
An der Spitzenclusterinitiative MAI Carbon des Carbon Composites e.V. (CCeV) beteili-gen sich Unternehmen, Bildungs- und Forschungseinrichtungen sowie unterstützende Organisationen aus der Region München-Augsburg-Ingolstadt. Gründungspartner von MAI Carbon sind die Unternehmen Audi, BMW, Premium AEROTEC, Eurocopter, Voith und die SGL Group, sowie die IHK Schwaben, der Lehrstuhl für Carbon Composites(LCC) der TU München und der CCeV. Alle beteiligten Partner agieren auf dem Tech-nologiefeld Hochleistungs-Faserverbundwerkstoffe, und hier insbesondere auf dem Gebiet der carbonfaserverstärkten Kunststoffe (CFK). Der Schwerpunkt liegt auf denAnwenderbranchen Automobilbau, Luft- und Raumfahrt sowie dem Maschinen- und Anlagenbau.
Hauptanliegen von MAI Carbon ist es, den Werkstoff Carbon für die Serienreife fit zu machen sowie die Region München-Augsburg-Ingolstadt zu einem europäischen Kompetenzzentrum für CFK-Leichtbau auszubauen.
MAI Carbon
Maximilianstr. 3
86150 Augsburg, Germany
Tel.: 0821 324 1598
Fax: 0821 324 1596
E-Mail: [email protected]
Web: www.mai-carbon.de
Halle / Stand 4/B04
Mahr Metering Systems GmbH ist ein Unternehmen, dass seit über 60 Jahren Herstellervon Präzisions-Zahnradpumpen ist. Seit mehr als einem Jahrzent sind Misch- und Dosiermaschinen für die verschiedensten Anwendungen - auch im Bereich Composites - ein fester Bestandteil des Produktportfolios. Weltweit verlassen sich Kunden auf unsere hochgenauen Qualitäts-Produkte. UnsereBesonderheit ist das sehr kundenorientierte Produkt, angefangen bei der Entwicklung über die Herstellung bis hin zum Service.
For more than 60 years Mahr Metering Systems is manufacturer of high precision gear metering pumps. For more than 10 years meter mix and blending technology used in multiple businesses sectors is a fix part of portfolio. Applications realized also for the composite industries.Customers in all parts of the globe counts on Mahr‘s quality products. Close customersrelationship excels to work with Mahr Metering Systems.
Mahr Metering Systems GmbH
Carl-Mahr-Str.1
37073 Göttingen, Germany
Tel.: 0551 7073 0
Fax: 0551 7073 417
E-Mail: [email protected]
Web: www.mahr.de
Halle / Stand 6/B13
Magnum Venus Plastech is a worldwide industry leader in supplying complete com-posite fabrication solutions. The Advanced Equipment Division of MVP combines ourstate of the art spray up equipment with innovative automation technology to produce turn-key production systems. MVP filament winding equipment offers many unique features such as dual side production, fully integrated pumping systems, choices on number of axes and levels of controls. MVP also offers functional filament windingline accessories such as extractors, mandrels and prep machines, plant automation and more, making these configurable winding solutions work for you. MVP’s Advanced Equipment Division also provides systems for fiber placement, sheet roll lamination and flat panel production as well as gantry motion platforms. MVP equipment comes with a decades-long history of experience and proven customer service. So whatever your composite fabrication process requires MVP has your complete solution.
Magnum Venus Plastech
1862 Ives Ave
Kent WA 98032, United States
Tel.: +1 253 854 2660
Fax: +1 253 841 5181
E-Mail: [email protected]
Web: www.mvpind.com
Halle / Stand 6/A33
Die Maag Technic GmbH ist Hersteller von GFK-Formteilen in allen gängigen Verfahren wie Faserspritzen, RTM, Handlaminieren, Thermoformen, Hotcompression und VIV-Ver-fahren. Oberflächen: Sandinggelcoat, Sichtgelcoat oder lackiert.
Hergestellt werden Fahrzeugverkleidungen und Karosserieteile auch schallisolierend, inkl. aller Metallteile, einbaufertig, für Baumaschinen, Nutz-und Sonderfahrzeuge,Gehäuseverkleidungen für den Maschinenbau, Sanitärkabinen, Tanks, usw..
Maag Technic GmbH
Jahnstr. 106
73037 Göppingen, Germany
Tel.: 07161 9771-237
Fax: 07161 9771-269
E-Mail: [email protected]
Web: www.maagtechnic.de
Halle / Stand 4/B05
124
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsMak - Mas
M
Van der Mast Industrial Innovations supplies fibre cutting machines based on Chop-cot® and tOOchop® Technology for glass fibres, carbon fibres, basalt fibres, silica fibres, quartz fibres, natural fibres, etc.Main characteristics: Reliability and long lasting. Low maintenance. Standard machi-nes and special machines dedicated to customers requirements. Application fields:
Automotive Robotised spray up and preform Fabrication of chopped strandsDosing in compounding thermoplasticsPipe manufacturing Centrifugal casting Mat production lines and SMCPlasterboard manufacturing
Van der Mast Industrial Innovations
Westerstukken 45
9761 LJ Eelde, The Netherlands
Tel.: 0031 503096273
Fax: 0031 503096277
E-Mail: [email protected]
Web: www.chopcot.com
Halle / Stand 4/B38
Maroso can produce autoclaves of different dimensions according to the customersrequirements, in fact its production range goes from 0.5 metres as useful diameterup to 4.2 metres, instead the length goes up to 40 metres. The MAROSO autoclaves are designed for the polymerization of composites materials, for stratification of flat and curved glass, for the rubber vulcanization, for impregnation and drying processes of marble and by-products, for sterilization and pasteurization in food field, for met-hacrylate sector. Concerning the composite materials sector, the mains application fields are automo-tive, aeronautic and air craft, aerospace, marine, sports and leisure. All the autoclaves can be produced with standard dimensions and characteristics, or can be customized in according with specifications required by the customers. Maroso supplies also the utilities and services to complete its autoclave.
Maroso srl
Via A. de Gasperi, 19
36060 Pianezze (VI), Italy
Tel.: 0039(0)42477816
Fax: 0039(0)424470308
E-Mail: [email protected]
Web: www.maroso.it
Halle / Stand 6/C03
MAPAL ist spezialisiert auf Werkzeuge für die Bearbeitung kubischer Teile. Dazu bietetMAPAL das komplette Werkzeug-Know-how zur Bohrungsbearbeitung und zum Fräsen.Das Produktspektrum reicht von komplexen Sonderwerkzeugen bis zu leistungsfähigen Standardwerkzeugen. Absolute Präzision ist die Grundlage für die Qualität der MAPAL Werkzeuge. Das Ergebnis sind zuverlässige Werkzeugkonzepte, die eine prozesssichereFertigung garantieren. Feinbearbeitungswerkzeuge in den verschiedenen MAPAL Werk-zeug-systemen stehen für die μm-genaue Bearbeitung kompletter Werkstückkonturen. Ausgezeichnete Qualitäten bei Oberflächen-rauheit, Rundheit, Zylindrizität und höchs-te Standzeiten sind das Resultat.
Die MAPAL Systemkomponenten bieten dabei optimale Auswahl-möglichkeiten:Feinbearbeitungswerkzeuge und Reibahlen, PKD-Werkzeuge, ISO-Werkzeuge, Aus-steuerwerkzeuge, HSK-Spanntechnik, VHM-Werkzeuge, Einstellgeräte und Meßgeräte, MAPAL Services – Das Dienstleistungsangebot von MAPAL.
MAPAL Präzisionswerkzeuge Dr. Kress KG
Obere Bahnstr. 13
73431 Aalen, Germany
Tel.: 07361 585 188
Fax: 07361 585 150
E-Mail: [email protected]
Web: www.mapal.com
Halle / Stand 6/B43
MAKA Systems ist ein Unternehmen, das mit umfassender Fachkompetenz CNC-Bear-beitungszentren und ganzheitliche Branchenlösungen entwickelt. Wir bringen unsere Erfahrungen als weltweit arbeitendes und innovatives deutsches Maschinenbauunter-nehmen mit Tradition in die Entwicklung kreativer und zukunftssichernder Systemlö-sungen ein. Für unsere Kunden entwickeln wir 5-Achs-CNC-Bearbeitungszentren und ganzheitliche Lösungskonzepte auf hohem Niveau.
Anspruchsvolle Arbeiten an räumlichen Körpern werden mit der 5-Achs-Technik ver-wirklicht und überzeugen im Flugbau ebenso wie im Automobil-, Yacht-, Schienenfahr-zeug- und Großmodellbau. MAKA bietet verschiedenste Baureihen für die Bearbeitung von Bauteilen aus GFK, CFK, Aluminium-Compound und modernen Verbundwerkstoffen an. Die vielseitigen Funktionen, die hohe Flexibilität und die Präzision der Bearbei-tungszentren überzeugen Spezialisten aus Branchen, die gewohnt höchste Ansprüche stellen.
MAKA Systems GmbH
Am Schwarzen Graben 8
89278 Nersingen, Germany
Tel.: +49 7308813 0
Fax: +49 7308813 170
E-Mail: [email protected]
Web: www.maka.com
Halle / Stand 6/A01
125
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsMat - Met
M
Metyx Composites produziert eine breite Palette hochwertiger technischer Textilien : Multiaxiale Verstärkungsmaterialien aus Glas- und Karbonfasern, Rovinggewebe sowie Abreißgewebe.Alle Produktionsprozesse entsprechen ISO 9001:2008, um für unsere Kunden ein Höchstmaß an Qualität zu gewährleisten. Metyx bietet darüber hinaus technische Beratung und Schulungen an.
Metyx Composites manufactures a wide range of high-quality technical textiles:multiaxial reinforcement materials such as glass and carbon fibers, woven roving andpeel ply. All production processes conform to ISO 9001:2008 to ensure the highest quality for our customers. Metyx is also offering technical consulting and training.
METYX Composites Telateks A.S. – Office Hamburg Glockengiesserwall 17
20095 Hamburg, Germany
Tel.: +49 40 333 13 710
Fax: +49 40 333 13 377
E-Mail: [email protected]
Web: www.metyx.com
Halle / Stand 6/C24
Anlagen, Komponenten, Apparate und vollstufige Engineering- und Serviceleistungenfür Industriestandorte weltweit auf den GebietenTrocknungstechnik - Automatisierungstechnik - Produktionsaufbau
Mehler Engineering + Service GmbH
Edelzeller Straße 44
36043 Fulda, Germany
Tel.: 0661 103-321
Fax: 0661 103-323
E-Mail: [email protected]
Web: www.m-e-s.de
Halle / Stand 6/C14
McClean Anderson, a world leader of advanced filament winding equipment, provides innovative and cost-effective filament winding equipment solutions to customersworldwide. We develop, manufacture and support filament winding equipment witha proven track record for quality, service and price. McClean Anderson equipmentfeatures multiple spindle and axis winding configurations, digital electronic tensioningsystems, programming software, fiber wet out systems and mandrel extractors. Since 1961, McClean Anderson has kept our focus the same - you the customer - addressing and enhancing your unique filament winding needs.
McClean Anderson
P O Box 20 300 Ross Ave
Schofield WI 544760002, United States
Tel.: 001 715 355 3006
Fax: 001 715 359 0600
E-Mail: [email protected]
Web: www.mccleananderson.com
Halle / Stand 6/G39e
mates italiana srl
Via Pacinotti, 4
20090 Segrate (MI), Italy
Tel.: 0039 02 9216 0357
Fax: 0039 02 9216 0231
E-Mail: [email protected]
Web: www.mates.it
Halle / Stand 6/E02
126
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsMas - Mit
M
Mitsubishi Rayon Co., Ltd. incorporating Mitsubishi Rayon Carbon Fibre & Composites (formerly Grafil Inc. and Newport Adhesives & Composites Inc.)and the new additions Aldila Inc. and TK Industries GmbH, is one of the largest vertically integrated producers of advanced materials. Products: Precursor,PAN-based high strength, high performance carbon fiber GRAFIL and PYROFIL, chopped fiber, intermediate carbon materials, Prepregs, Hot Melt Towp-regs, Non-Crimped Fabrics and composite products. Carbon fibre line-up: 3K to 60K, standard modulus to high modulus
Applications: include automotive, wind energy, aerospace, marine, oil and gas, sporting goods, other industrial
Highlights: PYROFIL Heavy Tow, a cost effective large tow carbon fiber with the pro-cessability and properties of regular tow.
PCM Technology (Prepreg Compression Moulding) rapid cure for fast cycle mouldings suitable for high output applications such as industrial and automotive parts.
Mitsubishi Rayon Co. Ltd.
Willstätterstr 30
40219 Düsseldorf, Germany
Tel.: 0211-520 54 511
Fax: 0211-520 54 549
E-Mail: [email protected]
Web: www.mrc.co.jp
Halle / Stand 4/D22
MITSUBISHI GAS CHEMICAL CO., INC. is the producer of LEXTER, a bio-based polyamide with high modulus and high mechanical strength. LEXTER also shows high chemical resistance and low moisture absorption.
LEXTER is an affordable high-performance solution as a matrix resin for your thermo-plastic composites.Now available in pellets, powder, film and semi-pregs
MITSUBISHI GAS CHEMICAL CO., INC.
MITSUBISHI Building 5-2 Marunouchi 2-chome, Chiyoda-ku
Tokyo 100-8324, Japan
Tel.: +81-3-3283-5000
Fax: +81-3-3214-0938
E-Mail: [email protected]
Web: www.mgc.co.jp
Halle / Stand 4/F28
MICADO SMART ENGINEERING
For more than 10 years, MICADO sets standards in the field of Universal Holding Fixtures for reworking composite components. MICADO focuses on innovative turnkeysolutions and has gained a highly appreciated reputation by several Airbus- and Boeing suppliers due to the high reduction of set-up time, efficency and reduction of storage space!
For the next steps in automation MICADO offers also LIGHWEIGHT FIXTURES made of carbon or glass fibre. The weight savings up to 80% allow cost effective handlingbeside overhead cranes!
Starting from simple standard solutions to fully-automated Universal Holding Fixtures,Micado is your partner for all challenges.
MICADO SMART ENGINEERING GmbH
Amlacherstraße 12
9900 Lienz, Austria
Tel.: +43 4852 72850
Fax: +43 4852 72850 34
E-Mail: [email protected]
Web: micado.at
Halle / Stand 6/D34
Die Firma MEYER wurde 1949 gegründet und ist bis heute einer der bedeutendsten Hersteller von Spezialmaschinen zum Verkleben, Beschichten, Pressen und Verformen.
Dies drückt auch unser Slogan aus: Ideen, die verbinden. Seit mehreren Jahrzehnten produziert Meyer innovative Maschinen, wie Fixiermaschi-nen, Heizpressen, Kaschieranlagen und auch große Verformanlagen. Von unserer Kom-petenz und unseren innovativen Lösungen begeistern sich weltweit unsere zufriedenen Kunden.
Maschinenfabrik Herbert Meyer GmbH
Herbert-Meyer-Str. 1
92444 Rötz, Germany
Tel.: +49 (0) 9976 208 0
Fax: +49 (0) 9976 151 0
E-Mail: [email protected]
Web: www.meyer-machines.com
Halle / Stand 6/B30
127
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsMmm - Mon
M
Mondi is an international packaging and paper Group, with production operations across 30 countries and revenues of 5.8 billion in 2012. The Group‘s key operations are located in central Europe, Russia and South Africa and as at the end of 2012, Mondi employed 25,700 people.
Mondi Group is fully integrated across the packaging and paper value chain, from thegrowing of wood and the production of pulp and paper (packaging paper and uncoated fine paper), to the conversion of packaging paper into corrugated packaging, industrial bags, extrusion coatings and release liner. Mondi is also a supplier of innovative
consumer packaging solutions, advanced films and hygiene products components.
Mondi
Kelsenstrasse 7
1032 Wien, Austria
Tel.: +43 (0)1 79013 4975
Fax: +43 (0)1 79013 951
E-Mail: [email protected]
Web: www.mondigroup.com
Halle / Stand 4/E41
Momentive Specialty Chemicals was formed in 2010 through the combination of entities owned by Momentive Performance Materials and Hexion Specialty Chemicals.The company is a global leader in specialty chemicals and materials with over 10.000 employees and 115 manufacturing facilities dedicated to making customers’ products and processes perform better. With 2010 pro forma sales of $7.5 billion, it serves abroad range of markets including construction, transportation, electronics, energy, healthcare/personal care and consumer goods.
Amongst other phenolic resins for manufacturing high performance pre-preg materials,Momentive will present its Cellobond FRP phenolic resin system for GRP compositesparts used in rail, aerospace, marine and automotive industries at the CompositesEurope.
Momentive Speciality Chemicals Gmbh
Gennaer Str. 2-4
58642 Iserlohn - Letmathe, Germany
Tel.: 02374 9 25 467
Fax: 02374 9 25 733
E-Mail: [email protected]
Web: www.momentive.com
Halle / Stand 4/E42
MM MaschinenMarkt - Das Industriemagazin
MM MaschinenMarkt bietet als wöchentlich erscheinendes Industriemagazin aktuelle Informationen aus dem gesamten Produzierenden Gewerbe. Die Rubriken Produktion,Automation und Konstruktion bilden technische Trends und neue Produkte ab und stellen deren Einsatz und Instandhaltung in Fertigung und Automation vor. Wirt-schaftsnachrichten, Managementthemen, Interviews und Trendmeldungen runden das Informationsangebot für Fach- und Führungskräfte in der Industrie ab.
“MM Maschinenmarkt“Vogel Business Media GmbH & Co. KGMax-Planck-Str. 7/9
97082 Würzburg, Germany
Tel.: +49 931 418 0
Fax: +49 931 418-22 80
E-Mail: [email protected]
Web: www.maschinenmarkt.de
Halle / Stand 6/C30 Media Pavilion
128
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsMed - Med
M
Medienpavillon / Media Pavilion – Hall/Stand 6/C30
„adhäsion KLEBEN & DICHTEN“Springer Fachmedien Wiesbaden GmbHAbraham-Lincoln-Str. 46
65189 Wiesbaden, Germany
Tel.: 0611 7878 0
Fax: 0611 7878 412
E-Mail: [email protected]
Web: www.adhaesion.com
„A+D+M“Publicomm S.r.l.Via Domenico Cimarosa, 55r
17100 Savona, Italy
Tel.: +39 019 8384 11
Fax: +39 019 8384 141
E-Mail: [email protected]
Web: www.publicomm.it
„Aerospace Manufacturing“MIT Publishing Ltd.Featherstone House, 375, High Street
Rochester KEN ME1 1DA, United Kingdom
Tel.: +44 1634 830566
Fax: +44 1634 408488
E-Mail: [email protected]
Web: www.aero-mag.com
„All about Sourcing“Network Press Germany GmbHFriedberger Str. 154
86163 Augsburg, Germany
Tel.: +49 821 26 28 91-0
Fax: +49 821 26 28 91-29
E-Mail: [email protected]
Web: www.allaboutsourcing.de
„AUTOCAD & Inventor Magazin“WIN-Verlag GmbH & Co.KGJohann-Sebastian-Bach-Str. 5
85591 Vaterstetten, Germany
Tel.: 0049 08106 350-0
Fax: 0049 08106 350-190
E-Mail: [email protected]
Web: www.win-verlag.de
„AutomobilKONSTRUKTION“Konradin Verlag R. Kohlhammer GmbHErnst-Mey-Str. 8
70771 Leinfelden/Echterdingen, Germany
Tel.: +49 711 7594-436
Fax: +49 711 7594-1436
E-Mail: [email protected]
Web: www.autokon.de
„Automobil Industrie“Vogel Business Media GmbH & Co. KGMax-Planck-Str. 7/9
97082 Würzburg, Germany
Tel.: +49 931 418 0
Fax: +49 931 418 2100
E-Mail: [email protected]
Web: www.vogel-medien.de
„AVR Allgemeiner Vliesstoff-Report“dpw-Verlagsgesellschaft mbHBorsigstr. 1-3
63150 Heusenstamm, Germany
Tel.: 0049 6104606 0
Fax: 0049 6104606 444
E-Mail: [email protected]
Web: www.kepplermediengruppe.de
„www.chemiaibiznes.com.pl“EPS Media Ewelina Plonska-Stepulakst. Miklaszewskiego 6/64
Warsaw 02-776, Poland
Tel.: +48 22 253 81 01
Fax: +48 22 253 81 01
E-Mail: [email protected]
Web: www.chemiaibiznes.com.pl
„chemie & more“succidia AGRösslerstr. 88
64293 Darmstadt, Germany
Tel.: 06151 360 56 0
Fax: 06151 360 56 11
E-Mail: [email protected]
Web: www.succidia.de
„Composite Solutions“CREI srlVia Ponte Nuovo, 26
20128 Milano, Italy
Tel.: 0039 02 26305505
Fax: 0039 02 26305621
E-Mail: [email protected]
Web: www.compositesolutions.it
„Composite World“Union of Composites Manufacturers (UNCM)PObox 49
Moscow 117292, Russia
Tel.: 007 495 984 76 74
Fax: 007 495 984 76 74
E-Mail: [email protected]
Web: www.uncm.ru
„construction materials, equipment, technologies of 21 century“AK marketing & consultAm Torsee 2
96132 Schlüsselfeld, Germany
Tel.: +49 9552 9294704
E-Mail: [email protected]
Web: www.krajacic.de
„Die BRÜCKE“Feliciter Kiadó/ Feliciter Publishing Ltd.Nyár u. 7.
Nyiregyháza 4400, Hungary
Tel.: +36-30-399-8940
Fax: +36-42-504-930
E-Mail: [email protected]
Web: www.feliciter.hu
„Digital Engineering“WIN-Verlag GmbH & Co.KGJohann-Sebastian-Bach-Str. 5
85591 Vaterstetten, Germany
Tel.: 0049 08106 350-0
Fax: 0049 08106 350-190
E-Mail: [email protected]
Web: www.win-verlag.de
„Digital Manufacturing“WIN-Verlag GmbH & Co.KGJohann-Sebastian-Bach-Str. 5
85591 Vaterstetten, Germany
Tel.: 0049 08106 350-0
Fax: 0049 08106 350-190
E-Mail: [email protected]
Web: www.win-verlag.de
„EURAILmag“Blu Line & Bro78 av. de la République
75011 Paris, France
Tel.: +33 140 21 08 68
E-Mail: [email protected]
Web: www.mobility-magazine.com
„FAPU - Fachmagazin für die Polyurethanindustrie“KP VerlagChristine-Teusch-Str. 34
22846 Norderstedt, Germany
Tel.: +49 40 432 71778
Fax: +49 40 432 71779
E-Mail: [email protected]
Web: www.fapu.de
„GAK - Gummi Fasern Kunststoffe“Dr. Gupta VerlagAm Stadion 3b
40878 Ratingen, Germany
Tel.: +49 2102 9345 0
Fax: +49 2102 9345 20
E-Mail: [email protected]
Web: www.gupta-verlag.de
„HANSA“Schiffahrts-Verlag „Hansa“ GmbH & Co. KGGeorgsplatz 1
20099 Hamburg, Germany
Tel.: +49 (0)40 70 70 80-01
E-Mail: [email protected]
Web: www.hansa-online.de
„Industrial Engineering News“Thomas Industrial Media GmbHRuhrallee 185
45136 Essen, Germany
Tel.: +49 (0)201 8945 210
Fax: +49 (0)201 8945 58210
E-Mail: [email protected]
Web: www.tim-europe.com
„Industriemagazin“Industriemagazin Verlag GmbHLindengasse 56
1070 Wien, Austria
Tel.: 0043 1 585 9000 0
Fax: 0043 1 585 9000 16
E-Mail: [email protected]
Web: www.industriemagazin.net
129
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsMed - Med
M
„Interceram“Expert Fachmedien GmbHAachener Str. 172
40223 Düsseldorf, Germany
Tel.: +49 211 1591 210
Fax: +49 211 1591 150
E-Mail: [email protected]
Web: www.interceram-review.info
„Jahresmagazin IngenieurwissenschaftenDeutschland - Werkstofftechnologie“ALPHA Informationsgesellschaft mbHFinkenstraße 10
68623 Lampertheim, Germany
Tel.: 06206 939-0
Fax: 06206 939-251
E-Mail: [email protected]
Web: www.alphapublic.de
„KEM Konstruktion Entwicklung Management“Konradin Verlag R. Kohlhammer GmbHErnst-Mey-Str. 8
70771 Leinfelden/Echterdingen, Germany
Tel.: +49 711 7594-436
Fax: +49 711 7594-1436
E-Mail: [email protected]
Web: www.kem.de
„Keramische Fachzeitschrift“Expert Fachmedien GmbHAachener Str. 172
40223 Düsseldorf, Germany
Tel.: +49 211 1591 210
Fax: +49 211 1591 150
E-Mail: [email protected]
Web: www.keramische-zeitschrift.info
„KI - Kunststoff Information“Kunststoff Information Verlagsgesellschaft mbHSaalburgstr. 157
61350 Bad Homburg, Germany
Tel.: 06172 9606 0
Fax: 06172 9606 99
E-Mail: [email protected]
Web: www.kiweb.de
„Konstruktionspraxis“Vogel Business Media GmbH & Co. KGMax-Planck-Str. 7/9
97082 Würzburg, Germany
Tel.: +49 931 418 0
Fax: +49 931 418-22 80
E-Mail: [email protected]
Web: www.konstruktionspraxis.de
„KunststoffXtra“SIGWERB GmbHUnter Altstadt 10
6301 Zug, Switzerland
Tel.: +41 34 423 35 61
E-Mail: [email protected]
Web: www.kunststoffxtra.com
„K-Zeitung“Giesel Verlag GmbHBüro Hannover, Hans-Böckler-Allee 9
30173 Hannover, Germany
Tel.: 0511 7304-142
Fax: 0511 7304-157
E-Mail: [email protected]
Web: www.giesel.de
„lightweight design“Springer Fachmedien Wiesbaden GmbHAbraham-Lincoln-Str. 46
65189 Wiesbaden, Germany
Tel.: 0611 7878 0
Fax: 0611 7878 412
E-Mail: [email protected]
Web: www.lightweight-design.de
„MM Maschinenmarkt“Vogel Business Media GmbH & Co. KGMax-Planck-Str. 7/9
97082 Würzburg, Germany
Tel.: +49 931 418 0
Fax: +49 931 418-22 80
E-Mail: [email protected]
Web: www.maschinenmarkt.de
MybusinessmediaPO Box 58
7400 Deventer, Netherlands
Tel.: +31 (0) 6 227 966 33
E-Mail: [email protected]
Web: www.mybusinessmedia.nl
„PIE – Plastics Information Europe“Kunststoff Information Verlagsgesellschaft mbHSaalburgstr. 157
61350 Bad Homburg, Germany
Tel.: 06172 9606 0
Fax: 06172 9606 99
E-Mail: [email protected]
Web: www.pieweb.com
“PITTURE E VERNICI-EUROPEAN COATINGS”CREI srlVia Ponte Nuovo 26
20128 Milano, Italy
Tel.: 0039 02 26305505
Fax: 0039 02 26305621
E-Mail: [email protected]
Web: www.pittureevernici.it
„www.plastech.pl“Plastech Pawel Wisniewskiul Relaksowa 4
Torun 87-100, Poland
Tel.: 0048 56622 9037
Fax: 0048 56622 9037
E-Mail: [email protected]
Web: www.plastech.pl
„Plastiques & Caoutchoucs“INFOPRO COMMUNICATIONSAntony Parc II - 10, Place du Général de Gaulle
92186 Antony Cedex, France
Tel.: +33 (0)1 77 92 96 01
E-Mail: [email protected]
Web: www.plastiques-caoutchoucs.com
„PU Magazin“Dr. Gupta VerlagAm Stadion 3b
40878 Ratingen, Germany
Tel.: +49 2102 9345 0
Fax: +49 2102 9345 20
E-Mail: [email protected]
Web: www.gupta-verlag.de
„Reinforced Plastics“Elsevier LtdThe Boulevard, Langford Lane, Kidlington
Oxford Oxfordshire OX5 1GB, United Kingdom
Tel.: 0044 1865 843638
Fax: 0044 1865 843973
E-Mail: [email protected]
Web: www.reinforcedplastics.com
„roofi ng & insulating material“AK marketing & consultAm Torsee 2
96132 Schlüsselfeld, Germany
Tel.: +49 9552 9294704
E-Mail: [email protected]
Web: www.krajacic.de
SAMPE1161 Parkview Drive
Covina CA 91724, United States
Tel.: +1 626 331 0616
Fax: +1 626 332 8929
E-Mail: [email protected]
Web: www.sampe.org
verlag moderne industrie GmbHJustus-von-Liebig-Str. 1
86899 Landsberg, Germany
Tel.: 08191-125 0
Fax: 08191-125 526
E-Mail: [email protected]
Web: www.mi-verlag.de
„VIA MARE BY SEA“CREI srlVia Ponte Nuovo, 26
20128 Milano, Italy
Tel.: 0039 02 26305505
Fax: 0039 02 26305621
E-Mail: [email protected]
Web: www.viamarebysea.it
„Werkstoffe der Fertigung“HW-VerlagSonnenblumenring 35
86415 Mering, Germany
Tel.: 08233-32761
Fax: 08233-32762
E-Mail: [email protected]
Web: www.werkstoffzeitschrift.de
Medienpavillon / Media Pavilion – Hall/Stand 6/C30
130
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsMor - Mue
M
N
Innovation & quality – our daily motivation
At Münch Chemie, we operate in a challenging environment. We therefore strive to constantly prove the quality of our work and to develop new solutions. The combinati-on of technological innovation and creativity is the road to our success. Be part of our journey.
Areas of application: - Wind energy - Aerospace technology - Marine - Automotive - Composite - SMC /BMC - Polymer concretes - Mineral casting and Prepreg - Model and mould construc-tion.
Münch Chemie International GmbH
Viernheimer Straße 70-76
69469 Weinheim, Germany
Tel.: +49 6201 99830
Fax: +49 6201 17195
E-Mail: [email protected]
Web: www.muench-chemie.com
Halle / Stand 4/B24
MÜHLMEIER compositeMaterials for ideas
Composite Bauteile erlauben Ihnen heute in Dimensionen zu denken, die noch vorwenigen Jahren nicht möglich waren. Unsere langjährige Erfahrung und Branchen-kenntnis und unsere wettbewerbsfähigen Produkte sind der Schlüssel für Ihren Erfolg. Wenn es um wirkliche Kompetenz geht, benötigt der Mensch einen Fachmann. Bei qualifizierter Beratung und der Lösung kundenspezifischer Probleme gibt es nur einen maßgeblichen Partner: DEN BESTEN - MÜHLMEIER composite Wir bieten Ihnen die komplette Bandbreite an Composite Rohstoffen namhafter natio-naler und internationaler Hersteller.Carbongewebe und Gelege, Glasfaserprodukte, wie Matten, Gewebe, Gelege sowie Kurzglasfasern gehören ebenso zu unserem Portfolio wie auch Polyester- Vinylester- und Epoxidharze, Gelcoats, Tooling Systeme, Klebeharze, Vlies- und sonstige Hilfsstoffe.
Lassen Sie sich von unserer Leistungsfähigkeit und unseren Produkten überzeugen.
Mühlmeier Composite
Göttlitzweg 2-4
95671 Bärnau, Germany
Tel.: 09635 9202 0
Fax: 09635 9202 69
E-Mail: [email protected]
Web: www.muehlmeier.de
Halle / Stand 4/B14
MUBEA CARBO TECH GMBH
Eugen-Müller-Str. 16
5020 Salzburg, Austria
Tel.: 0043 662 2414 0
Fax: 0043 662 2414 77
E-Mail: [email protected]
Web: www.carbotech.at
Halle / Stand 6/B18
Moritz Diamantwerkzeugherstellung OHG steht seit über 40 Jahren für technischesKnow-How und innovative Entwicklungen. Wir sind ein Hersteller von hochwertigengalvanisch beschichteten Diamant-Werkzeugen für die Bearbeitung von GFK- und CFK-Werkstoffen. Neben einem breitgefächerten Standard-Werkzeugprogramm können auch Sonderan-fertigungen innerhalb kürzester Zeit realisiert werden. Dabei sind Beschichtungen biszu einem Durchmesser von 800mm möglich! Kennzeichnend für Diamant-Trennscheiben von MORITZ sind die vier extragroßen, seit-lichen Diamant-Beläge, die einen großzügigen Freischnitt in allen Schnittsituationensicherstellen. Für die Bearbeitung mit CNC-Maschinen werden Diamant-Trennscheiben mit Spann-schaft angeboten. Die Grundkörper werden dabei aus einem Stück gefertigt. Dies ermöglicht eine sehr hohe Beanspruchung der Trennscheiben.Weiterhin können auch Diamant-Bohrer und -Fräser in allen Größen in kürzester Zeit gefertigt werden.
Moritz Diamantwerkzeugherstellung OHG
Walther-Rathenau-Str. 5a
08233 Treuen, Germany
Tel.: 037468 2528
Fax: 037468 2596
E-Mail: [email protected]
Web: www.moritz-diamant.de
Halle / Stand 6/E39
131
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsMul - Nab
Made in Germany Nabertherm with 350 employees worldwide have been developing and producing industrial furnaces for many different applications for over 60 years. As a manufactu-rer, Nabertherm offers the widest and deepest range of furnaces worldwide. 150,000 satisfied customers in more than 100 countries offer proof of our commitment toexcellent disign, quality and cost efficiency. Short delivery times are ensured due toour complete inhouse production and our wide variety of standard furnaces.
Setting Standards in Quality and Reliability Nabertherm does not only offer the widest range of standard furnaces. Professional engineering in combination with inhouse manufactoring provide for individual project planning and construction of tailor-made thermal process systems with material hand-ling and charging systems. Complete thermal processes are realized by customized system solutions.
Nabertherm GmbH
Bahnhofstraße 20
28865 Lilienthal, Germany
Tel.: +49 4298 922 0
Fax: +49 4298 922 129
E-Mail: [email protected]
Web: www.nabertherm.com
Halle / Stand 4/A21
MYbusinessmedia is one of the four largest magazine publishers in the Netherlands. The company typically uses cross-media, which is a form of communication that uses various forms of mutually reinforcing media. MYbusinessmedia focuses on online ap-plications as well as print publications, courses and events. The products are targeted toward entrepreneurs and professionals who need constantly updated and relevant information.
Mybusinessmedia has an extensive portfolio with over 30 different brands, including:Constructeur, Kunststof en Rubber and Product.
ONLINE FIRST MYbusinessmedia has consistently committed to online applications (online first stra-tegy). In one year, the company has reached an impressive 2.8 million page views per month, including 450,000 unique visitors. Visitors are mainly entrepreneurs and B2B professionals.
Mybusinessmedia
PO Box 58
7400 Deventer, The Netherlands
Tel.: +31 (0) 6 227 966 33
E-Mail: [email protected]
Halle / Stand 4/A36, 6/C30 Media Pavilion
Die Munich Composites GmbH fertigt in kleinen und in großen Stückzahlen komplexeProfilbauteile mit Hilfe der Umflechttechnik. Dabei wird die Prozesskette ganzheitlich betrachtet. Munich Composites bietet ein einzigartiges Know How in der Kerntech-nologie für Flechtbauteile, in der automatisierten Beflechtung der Kerne und in der Injektion und Aushärtung. Zusätzlich wird den Kunden ein umfangreiches Angebot an Entwicklungsleistungen rund um die Herstellung von Composite-Bauteilen geboten. Einsatzbereiche für geflochtene Profilbauteile sind der allgemeine Maschinenbau,der Automobilbau, das Transportwesen, Sport- und Freizeitartikel und die Luft- und Raumfahrt.Die Munich Composites GmbH entwickelt und fertigt in München und bietet dadurch ein Höchstmass an Qualität und Flexibilität.
Munich Composites GmbH
Willy-Messerschmitt-Straße 1 (Geb.91) Gewerbegebiet SO
Hochtechnologie
85521 Ottobrunn, Germany
Tel.: +49 89 8905550-0
Fax: +49 89 8905550-19
E-Mail: [email protected]
Web: www.munich-composites.de
Halle / Stand 4/D02
Seit 1990 dreht sich bei uns alles um Werbetechnik und Digitaldruck. Mit Erfahrungenseit 1997 im Bereich Sublimation und digitalem Textildruck sehen wir uns als Vorreiter dieser neuen Technologien. Die vergangenen Jahre haben wir effektiv genutzt, bishe-rige Erfahrungen sowie unser Produktangebot zu vergrößern und anzupassen. Heutebauen wir unser Sortiment kontinuierlich aus, um unseren Kunden stets qualitativhochwertige Produkte anbieten zu können. Außer digitalen Großformat-Druckern, Fixiermaschinen, Schneideplottern, Finishing-Systemen und Software bieten wir auch die dazugehörigen Verbrauchsmaterialien (wie Tinten, Transferpapiere oder Teppichbö-den) an, die perfekt auf die Arbeit mit unseren Drucksystemen abgestimmt sind. Unsere hohe Fachkompetenz und das notwendige Anwendungs-Know-How ist ein weiteresPlus, von dem unsere Kunden und Partner profitieren können.
Multi-Plot Europe GmbH
Industriestr. 1-3
34308 Bad Emstal, Germany
Tel.: 05624 9235800
Fax: 05624 9235815
E-Mail: [email protected]
Web: www.multiplot.de
Halle / Stand 4/F11
N
M
132
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsNan - Net
N
The NETZSCH Group is an owner-managed, internationally operating technology com-pany headquartered in Germany. Three Business Units – Analyzing & Testing, Grinding & Dispersing, and Pumps & Systems – provide tailored solutions for highest-level needs. Over 2,700 employees at 140 sales and production centers in 27 countriesacross the globe guarantee that expert service is never far from our customers.
When it comes to Thermal Analysis, Adiabatic Reaction Calorimetry and the determi-nation of Thermophysical Properties, NETZSCH Analyzing & Testing has it covered. Our 50 years of applications experience, broad state-of-the-art product line – covering a temperature range from -260°C to 2800°C – and comprehensive service offerings en-sure that our solutions will not only meet your every requirement but also exceed your every expectation.
NETZSCH-Gerätebau GmbH
Wittelsbacherstr. 42
95100 Selb, Germany
Tel.: 09287 881-0
Fax: 09287 881-505
E-Mail: [email protected]
Web: www.netzsch-thermal-analysis.com
Halle / Stand 6/B17
NECUMER GmbH manufactures and markets a wide choice of modeling and tooling boards with matching adhesives under the brand name NECURON®.By specializing in various dimensions and densities these polyurethane and epoxy boards are formulated for special applications required for making models, tools, jigsand fixtures. Available through a world-wide network of competent sales partners, NECURON® of-fers modeling board materials with dimensional stability and accuracy which are easy and fast to process both by hand and machine. Quality standards are guaranteed through extensive controlling throughout all manu-facturing processes.These quality standards have been confirmed within the framework of re-certification according to DIN/ISO 9001-2008 in 2013.
NECUMER GmbH
Bruchheide 16
49163 Bohmte, Germany
Tel.: +49 (0) 5471 9502 0
Fax: +49 (0) 5471 9502 99
E-Mail: [email protected]
Web: www.necumer.de
Halle / Stand 4/F19
Unsere Philosophie ist seit fast 4 Jahren konsequent einen eigenen Weg zu gehen. Engagment, Kompetenz und Erfahrung zeichnen jeden einzelnen Mitarbeiter unseres Teams aus.Alle arbeiten an dem gemeinsamen Ziel: Präzision & Qualität NB Carbon fertigt hochwertige Kohlefaserlaminate sowie Prepreglaminate die mit höchster Präzision verarbeitet werden
NB-Carbon
Obere Seewiesen 39
71711 Steinheim-Höpfigheim, Germany
Tel.: +4971448830494
Fax: 071448830495
E-Mail: [email protected]
Web: www.nb-carbon.de
Halle / Stand 6/G19
Nanjing Loyalty Composite Equipment Manufacture Co. Ltd.
No 26 Bofu Road, Zhongshan Science & Technology Park
NanJing JNGS 211506, China
Tel.: 0086 25 588 04462
Fax: 0086 25 588 12165
E-Mail: [email protected]
Web: www.njloyalty.net
Halle / Stand 6/A21
133
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsNeu - Nor
N
NORD COMPOSITES is supplying a large range of polyester and vinyl ester products to the composites market : resins, Gel Coat, pigment pastes and bonding pastes. SinceSeptember 2012, NORD COMPOSITES has bought a production resins plant in Italy. NORD COMPOSITES is now able to offer a full range of resins for coatings, resins for polyurethanes and resins for composites.
NORD COMPOSITES
Z.A. Route d‘Amiens
80890 Condé-Folie, France
Tel.: 0033 322315757
Fax: 0033 322318697
E-Mail: [email protected]
Web: www.nord-composites.com
Halle / Stand 4/B25
Norafin, ein innovativer Hersteller wasserstrahlverfestigter und vernadelter Vliese, bietet Ihnen massgeschneiderte Produktlösungen an, welche bedarfsgerecht umgesetzt werden. Es ist unser Ziel Kundenbedürfnisse in Produktfunktionen zu übertragen, innovative Ideen in passende Produkte umzusetzen sowie den gesamten Produktent-stehungsprozess zu berücksichtigen - von der Produktidee zur Produkteinführung
Wir bedienen technische und industrielle Märkte mit unseren hochwertigen, innova-tiven wasserstrahlverfestigten und vernadelten Vliesstoffen sowie Composites. UnsereZielmärkte beliefern wir u.a. mit Artikeln aus dem Bereich der Filtration, der Funktions-bekleidung, der Medizin, der Automobil- sowie der Bauindustrie.
Norafin Industries (Germany) GmbH
Gewerbegebiet Nord 3
09456 Mildenau, Germany
Tel.: +49 37335507 0
Fax: +49 37335507 222
E-Mail: [email protected]
Web: www.norafin.com
Halle / Stand 4/D03
Nief Plastic Group processes all kinds of plastics and composites (thermoplastics and thermosets) by injection, compression, machining and thermoforming. 2k moulding, inserts overmoulding, boiler making, decoration, sub-assemblies manufacture. Design/co-design of high performance products, rheology, environmental design. Destructive and non-destructive tests, Cofrend accreditation. Quality certifications such as ISO9001, ISO14001, ISO13485, ISOTS16949, OHSAS18001, EN9100, AQAP2120. Plantsin France(12), Germany, Poland, Hungary, Slovakia, Tunisia and Morocco.
Nief Plastic Group
10, rue Jean Rostand ZI- BP 315
69745 Genas cedex, France
Tel.: 0033 478401152
Fax: 0033 472470148
E-Mail: [email protected]
Web: www.nief-plastic.com
Halle / Stand 4/B07
Our brand “Polymer Engineering“ stands for scientific and practical research and tea-ching in the field of polymer materials. The business area of plastics at New MaterialsBayreuth GmbH, the department of Polymer Engineering at the University of Bayreuth and the department of Polymer Engineering at TuTech Innovation GmbH in Hamburg embody this brand under the guidance of Prof. Dr.-Ing. Altstädt. The main research atall three locations concentrates on materials, construction and production, with theaim to develop high performance plastic products. The focus of the research is the sys-tematic analysis and use of underlying relationships between processing, structure andproperties of polymer materials. This allows a strategic approach to the developmentof innovative products with the help of modern polymer materials.
Neue Materialien Bayreuth GmbH
Gottlieb-Keim Str. 60
95448 Bayreuth, Germany
Tel.: 0921 50736 0
Fax: 0921 50736 199
E-Mail: [email protected]
Web: www.nmngmbh.de
Halle / Stand 6/B04
134
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsNov - Opt
O
Die Optris GmbH ist einer der führenden Hersteller von Geräten zur berührungslosen Temperaturmessung. Optris bietet wahlweise tragbare oder stationäre Infrarot-Ther-mometer für eine punktuelle Temperaturmessung sowie Online-Infrarotkameras für eine thermografische Echtzeitanalyse an. Höchste Qualitätsstandards und eine Produk-tion in Deutschland sind für Optris zentraler Bestandteil der Unternehmenspolitik.
Optris GmbH
Ferdinand-Buisson-Str. 14
13127 Berlin, Germany
Tel.: 0049 305 00 197 0
Fax: 0049 305 00 197 10
E-Mail: [email protected]
Web: www.optris.de
Halle / Stand 6/F47
Supplementing the company’s proven GM pump series, Oerlikon Barmag has now developed the GA range for conveying higher-viscous (filled and unfilled) media. TheGA series is available in models for conveying volumes of between 1.25 and 30 cc/rev(0.6-144 liters/hour). It is designed for pressures of up to 200 bar – while drum pumps can even cope with 250 bar – for viscosities of up to 1,500 Pas and for temperatures up to a maximum of 225 °C. It is characterized by its short flow channels and the utilization of highly wear-resistant tool steels.
The GA pumps are predominantly used in silicone processing and in hot-melt adhesive applications, but also in processing resins and polyurethanes and other higher-viscousliquids. With the new range of pumps, Oerlikon Barmag now offers tailormade solu-tions for all applications for which accurately-defined, even metering is absolutelyessential.
Oerlikon BarmagZweigniederlassung der Oerlikon Textile GmbH & Co. KGLeverkuser Str. 65
42897 Remscheid, Germany
Tel.: 02191 67 0
Fax: 02191 67 1204
E-Mail: [email protected]
Web: www.pumps.barmag.oerlikontextile.com
Halle / Stand 6/A23
OBO-Werke GmbH & Co. KG
Am Bahnhof 5
31655 Stadthagen, Germany
Tel.: 05721 78010
Fax: 05721 77855
E-Mail: [email protected]
Web: www.obo-werke.de
Halle / Stand 6/E36
Leicht muss es sein! – Die NOVACOM GmbH bietet effiziente Leichtbaulösungen durchden Einsatz von RTM, Harzinfusion und 5-Achs-CNC-Bearbeitung. Seit 1991 entwi-ckeln und produzieren wir für unsere Kunden innovative Composite-Bauteile für unter-schiedlichste Anwendungen in den Bereichen Medizintechnik, Fahrzeugbau, Transportund Freizeit. Der Schwerpunkt liegt in der Herstellung der Bauteile, vom Einzelstück bis zu mittleren Serien, und den dafür erforderlichen Modellen, Formen und Werkzeugen. Alle wesentlichen Fertigungsschritte werden dabei im eigenen Haus ausgeführt. Vom Konzept über die Konstruktion und Prototypfertigung bis zum Serienbauteil bieten wirunseren Kunden alles aus einer Hand – innovativ, effizient und kostenorientiert.
NOVACOMVerstärkte Kunststoffe GmbHWerkstraße 26
52076 Aachen, Germany
Tel.: 0 24 08 93 89 93 - 0
Fax: 0 24 08 93 89 93 - 9
E-Mail: [email protected]
Web: www.novacom-ac.de
Halle / Stand 4/D40d
N
135
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsOrm - Pan
O
P
Panini S.R.L.
Via Taruffi,70
41053 Maranello, Italy
Tel.: +39 0536 940707
Fax: +39 0536 943705
E-Mail: [email protected]
Web: www.op-panini.it
Halle / Stand 6/C01
PANADUR GmbH
Am Sülzegraben 17
38820 Halberstadt, Germany
Tel.: 03941 6240 0
Fax: 03941 6240 20
E-Mail: [email protected]
Web: www.panadur.de
Halle / Stand 4/E40
PADE - CNC
Innovapark 20
87600 Kaufbeuren, Germany
Tel.: +49 (0)8341 96660 200
Fax: +49 (0)8341 96660 202
E-Mail: [email protected]
Web: www.pade-cnc.de
Halle / Stand 6/C11
Since more than 50 years ORMAMACCHINE is a leading factory specialized in the pro-duction of hydraulic presses suitable for different fields such as PU sandwich panels, composite materials, plastic, rubber, metal and wood.
The ORMAMACCHINE Composite Material Division is operating in different markets such as: PU panels foaming and gluing (discontinuous plants), printing and coupling of Kevlar, fibreglass, carbon fibre panels, polyester resin printing at high or low pressure, medium/low pressure vacuum embossing to transfer fibreglass + phenolic resins,phenolic resins and fibreglass printing at high/low pressure, thermal and acousticpanel coupling with PU adhesives, aluminium honeycomb sandwich panel coupling by pressing with epoxy, PU and EVA film adhesives.
A close and constant cooperation with the main „market players“ allows Ormamac-chine to face different technological challenges always finding the most suitable solutions.
ORMAMACCHINE S.p.A.
Viale Lombardia, 47
24020 Torre Boldone (BG), Italy
Tel.: 0039 035 364011
Fax: 0039 035 346290
E-Mail: [email protected]
Web: www.ormamacchine.it
Halle / Stand 6/A30
136
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsPau - Per
P
Permabond Engineering Adhesives LTD
Wessex Business Park, Wessex Way Colden Common
Winchester HAM SO21 1WP, United Kingdom
Tel.: 0044 1962711661
Fax: 0044 1962711662
E-Mail: [email protected]
Web: www.permabond.com
Halle / Stand 4/A25
Peak Technology GmbH
Technologiepark Straße 6
4615 Holzhausen, Austria
Tel.: +43 7243 503 43
Fax: +43 8109 554 06 3320
E-Mail: [email protected]
Web: www.peaktechnology.at
Halle / Stand 4/B04
PD FibreGlass
CUSTOMIZED SOLUTIONS
Die PD FibreGlass Group blickt auf eine mehr als 60-jährige Tradition in der Glasfa-serherstellung und -verarbeitung zurück. Dieses außerordentliche Erfahrungsspektrumermöglicht es uns, von der Faserherstellung über die Verarbeitung bis zur Beschichtung von textilen Glasfaserstrukturen, unseren anspruchsvollen Kunden ein Vollsortiment an Glasfaserprodukten für eine Vielzahl von Anwendungen aus einer Hand zu liefern.
In engster Zusammenarbeit mit unseren Kunden realisieren wir individuelle undinnovative Produktentwicklungen, die den hohen Qualitätsansprüchen unserer Kundengerecht werden.
PD FibreGlassP-D Glasseiden GmbH OschatzWellerswalder Weg 17
04758 Oschatz, Germany
Tel.: 03435 657 0
Fax: 03435 622 447
E-Mail: [email protected]
Web: www.pd-fibreglass.com
Halle / Stand 4/D15
Technische Dämmstoffe von BauderFOAM Individuell und schnell. Als Spezialist für Dämmstoffe im technischen Bereich produziert die Paul Bauder GmbH & Co. KG,Stuttgart Polyurethan-Dämmelemente für unterschiedlichste Einsatzbereiche, wie zum Beispiel die Dämmung im Kühlguttransport. Die Anwendungen für technische Dämm-stoffe reichen von der Rohr- und Behälter-isolierung über Stalldämmung, Türfüllungen, Großküchen, Fahrzeugbau und Sportgeräte bis in den Designbereich. Schnell undflexibel stellt sich das Bauder-Team auf unterschiedlichste Kundenwünsche ein. DasMaterial: BauderFOAM (Polyurethan-Hartschaum). Ein überragender Dämmstoff, mit dem auch ganz spezielle Anforderungen erfüllt werden können ? und das auf höchstem Qualitätsniveau. Mithilfe modernster Fertigungstechnik ist fast jede gewünschte Formherstellbar.
Paul Bauder GmbH & Co. KG
Korntaler Landstraße 63
70499 Stuttgart, Germany
Tel.: 0711 8807 289
Fax: 0711 8807 291
E-Mail: [email protected]
Web: www.bauder.de
Halle / Stand 4/B42
137
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsPft - Pin
P
Pinette Emidecau GmbH
Industriestraße 4
29499 Zernien, Germany
Tel.: +49 5863 9861 28
Fax: +49 5863 9861 61
E-Mail: [email protected]
Web: www.pinetteemidecau.eu
Halle / Stand 6/C22
resume Plastics Information Europe (PIE)
PIE Plastics Information Europe (www.pieweb.com), the well-known subscription-only newsletter and online portal, boast user-friendly, daily updated online coverage of the industry’s most important news. This valuable source of plastics information also offers staff-researched price reports on standard and technical thermoplastics, polyurethanes and PET, as well as industry reports – including market trends and other background articles – all supplemented by photos, charts and maps and links via PDF to other information sources. Additional attractive features of this website are the opportunity to create individualised polymer price charts and the personal archive feature.
“PIE – Plastics Information Europe“Kunststoff Information Verlags-gesellschaft mbHSaalburgstr. 157
61350 Bad Homburg, Germany
Tel.: 06172 9606 0
Fax: 06172 9606 99
E-Mail: [email protected]
Web: www.pieweb.com
Halle / Stand 6/C30 Media Pavilion
Phoenix is a Manufacturer of High Quality, Affordable Cost Spray Systems and Acces-sories for the Composite Industry. Our manufacturing facility is located in Largo, FL.USA. We ship worldwide from that location. Our Product Line includes Pump/SpraySystems for Wetout/Chop, Gelcoat, RTM, Polyurethane, Polyurea and RTM applications. Phoenix pumps range from 1GPM to 16GPM output. Phoenix has a line of proportio-ners for epoxy resins to Process Coatings, Adhesives, Polyurethane Foams, PolyurethaneElastomers, Polyureas requiring Off Ratios. Our accessory product line includes impregnators in sizes from 23“ to 60“ widths with both manual and automatic rollers,Heaters for both polyester and epoxy resins, flow alarms to monitor catalyst, monito-ring systems for glass,resin, level sensing and resin rollers. Our Philosophy is that Pump Systems don‘t need to be complicated to work effectively.
Phoenix Equipment Co.
11715 87th street North
Largo FL 33773, United States
Tel.: +1727-393-1818
Fax: +1727-393-1010
E-Mail: [email protected]
Web: www.phoenixequipment.com
Halle / Stand 6/G39a
PFT PROFILES ist ein innovatives Technologieunternehmen, das sich seit 1985 auf die Entwicklung und Produktion von hoch-qualitativen Kompositwerkstoffprofilen spezialisiert hat. Ein professionelles und kreatives Team entwickelt und produziert ein umfangreiches Angebot an Profilen aus glas-, kohlenstoff- und aramidfaserverstärktem Kunststoff.
Außer dem breiten Sortiment von Standard-Halbfabrikaten entwickelt PFT Profileszusammen mit seinen Auftraggebern auch Profile auf Maß.
PFT Profiles BV
De Vecht 44
8253 PH Dronten, The Netherlands
Tel.: 0031 321 31 64 25
Fax: 0031 321 31 75 76
E-Mail: [email protected]
Web: www.princefibretech.com
Halle / Stand 4/A34
138
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsPit - Pla
P
Plastic Glass is present on the market of composite materials manufacturing for che-mical, pharmaceutical, petrochemical industries, water conditioning, gas depuration and where are present problems related to corrosion, lightness and high mechanical strength. His modern manufacturing equipments, as Filament Winding and Spray-up machines, and the Internal Laboratory for material testing. Plastic Glass manufacturing procedure foresees the chemical resistant barrier “liner”, the mechanical resistant structural wall and the final external protective top coat.In vessels production as well as traditional chemical resistant barrier using polyester bisphenolic or vinylester resins, it is possible to have PVC – PP – PVDF – HALAR thermoplastic liners. Our technical office is able to perform AutoCAD drawings,calculations and verifications according to our own internal standard or according to international standards as prEN 13121-3, BS 4994:1987, ASME X, ASME RTP-1-2000,…, and so on.
PLASTIC GLASS S.r.l.
Via Miles, 8
20873 Cavenago di Brianza MB, Italy
Tel.: +39 02 9506445
Fax: +39 02 9506461
E-Mail: [email protected]
Web: www.plastic-glass.com
Halle / Stand 6/D01
“www.plastech.pl“Plastech Pawel Wisniewskiul Relaksowa 4
Torun 87-100, Poland
Tel.: 0048 56622 9037
Fax: 0048 56622 9037
E-Mail: [email protected]
Web: www.plastech.pl
Halle / Stand 6/C30 Media Pavilion
Plascore, Inc. is a global manufacturer of honeycomb core, composite structures and cleanrooms. Plascore honeycomb core is specified wherever high strength-to-weight ratio, energy absorption or directional qualities are desired. Plascore honeycomb core, manufactured in various materials, and offered in different configurations of cell diameters, thicknesses and densities, are used in a wide range of OEM and R&D appli-cations. Wherever there‘s a need for greater structural strength with less weight, you‘llfind Plascore honeycomb cores and technology.
Plascore GmbH & Co KG
Feldborn 6
55444 Waldlaubersheim, Germany
Tel.: 06707 914313
Fax: 06707 914340
E-Mail: [email protected]
Web: www.plascore.com
Halle / Stand 6/G33
PITTURE E VERNICI-EUROPEAN COATINGSSINCE 1924 RAW MATERIALS, FORMULATIONS & FINISHING
Published since 1924, Pitture e Vernici-European Coatings, is a monthly bilingual (ita-lian and english) publication addressed to all technicians involved in the formulation of coatings, adhesives, sealants, printing inks, related products. The magazine focuses on questions related to the use of raw materials such as ad-ditives, polymers and resins, solvents, dyes and pigments, extenders, plasticizers andother chemical products. Pitture e Vernici-European Coatings magazine also covers manufactoring technologies, plants and machinery, laboratory testing, safety and en-vironment, quality, certification as well as European regulations. The magazine is readworldwide as distribution combines print and digital. To download a copy of the magazine, please visit our website www.pittureevernici.it
“PITTURE E VERNICI-EUROPEAN COATINGS”CREI srlVia Ponte Nuovo 26
20128 Milano, Italy
Tel.: 0039 02 26305505
Fax: 0039 02 26305621
E-Mail: [email protected]
Web: www.pittureevernici.it
Halle / Stand 6/G49, 6/C30 Media Pavilion
139
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsPla - Pul
P
Pultex Kunststofftechnikhandel GmbH
In den Bremen 50
52152 Simmerath, Germany
Tel.: 02473 9278 0
Fax: 02473 9278 78
E-Mail: [email protected]
Web: www.pultex.de
Halle / Stand 4/F35
Premier Hose Technologies will be showing the full range of Vortex Vacuum Valves &Hoses. The Vortex range comprises of high temperature vacuum valves and hoses forautoclaves and ovens. Each valve has a leak free solid body design and is manufactu-red from stainless steel, all valves are fully resealable allowing full servicing with quick and easy resealing. Vortex silicone hoses are manufactured to the highest standard to give a long working life and guaranteed no free radical particle release. The full range is available in working temperatures of up to 232 or 250 degree C.Vortex Vacuum Vales & Hoses range include: flexible hose assemblies, QRC couplings with integrated hosetail or thread, bagging valves, QRC cartridge valves, QRC plugs, manifolds, tooling valves and a full range of accessories.
The Vortex range also includes quality cleanroom products including vacuum recoils, vacuum hosereels, drop gauges and vacuum regulators.
Premier Hose Technologies Ltd.
Unit 4 Clifton Business Park
Preston LAN PR4 OXQ, United Kingdom
Tel.: +44 1772 851370
Fax: +44 1772 653227
E-Mail: [email protected]
Web: www.hosetechnologies.com
Halle / Stand 4/A15
Plastiques & Caoutchoucs Magazine is the leading media brand in the Plastics and Rubber processing industry in France.It is the only monthly magazine which provides the technological and economic infor-mation of the sector. Each month, the magazine deals with the current events of rawmaterials, composites, equipment. Plastiques & Caoutchoucs is the key information magazine for decision makers, purchasers and processors in the Plastics and Rubber industry. It is distributed to5000 qualified subscribers and consulted by 15000 readers. The magazine also has an extra-circulation on the main trade fairs of the sector.
www.plastiques-caoutchoucs.com is the reference information website for the decision makers and principals of the industry. It has 14000 monthly unique visitors and 75000 page views.Its weekly newsletter is sent to 7500 subscribers. The readers are processors, suppliers of raw materials and machines, user industries and integrated workshops.
“Plastiques & Caoutchoucs“INFOPRO COMMUNICATIONSAntony Parc II - 10, Place du Général de Gaulle
92186 Antony Cedex, France
Tel.: +33 (0)1 77 92 96 01
E-Mail: [email protected]
Web: www.plastiques-caoutchoucs.com
Halle / Stand 6/C30 Media Pavilion
Plasticon France SA, member of Plasticon Composites group, has over 50 years of ex-perience in filament winding technology. Our team can design and manufacture a widerange of technical tubes made of high performance epoxy resin with reinforcementssuch as glass, carbon, flax, aramid, ...
We are a major supplier in many fields of applications: boat building, water desalinati-on, electrical insulation, military activities and other specific uses.
Find the tube that meets your needs/specifications by visiting our booth at CompositesEurope!
Plasticon France SA
16, rue Robert Schuman ZA de l‘Eraudière
85170 Dompierre sur Yon, France
Tel.: +33 251 088 654
Fax: +33 251 341 402
E-Mail: [email protected]
Web: www.plasticoncomposites.com
Halle / Stand 4/D20d
140
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsPum - Ram
Q
RAMPF Tooling GmbH & Co. KG
Robert-Bosch-Str. 8-10
72661 Grafenberg, Germany
Tel.: 0 7123 9342 1600
Fax: 0 7123 9342 1666
E-Mail: [email protected]
Web: www.rampf-tooling.de
Halle / Stand 4/A12
Quadrant Plastic Composites ist weltweit führend in der Herstellung glasmattenver-stärkter thermoplastischer (GMT) Verbundwerkstoffe. Die Plattenhalbzeuge werden im Pressverfahren zu anspruchsvollen Bauteilen vorwiegend für die Automobilindustrie,Bau & Konstruktion und weiteren Industrien weiterverarbeitet. Diese Bauteile erfüllen höchste Sicherheitsstandards und zeichnen sich durch ihr vergleichsweise geringes Gewicht gegenüber anderen Materialien wie beispielsweise Metall aus. Weitere Informationen unter www.quadrantplastics.com
Quadrant Plastic Composites AG
Hardstr. 5
5600 Lenzburg, Switzerland
Tel.: 0041 62 885 81 50
Fax: 0041 62 885 83 62
E-Mail: [email protected]
Web: www.quadrantplastics.com
Halle / Stand 6/B22
P+Z Engineering GmbH ist ein führender Anbieter für Entwicklungsdienstleistungen. Seit über 45 Jahren begleiten und unterstützen wir unsere Kunden aus der Automobil-, der Luft- und Raumfahrtindustrie sowie dem Sonder- und Nutzfahrzeugbau, dem Ma-schinen- und Anlagenbau und der Medizintechnik bei der Entwicklung Ihrer Produkte.
Durch Innovation, Zuverlässigkeit und Nachhaltigkeit garantieren unsere fünf Kompe-tenzfelder Konstruktion, Technische Berechnung & Simulation, Erprobung & Versuch, Elektrik & Elektronik sowie Projekt- & Qualitätsmanagement einen reibungslosenAblauf der Produktentwicklung.
P+Z Engineering GmbH
Anton-Ditt-Bogen 3
80939 München, Germany
Tel.: +49 (0) 89 / 31857 - 0
Fax: +49 (0) 89 / 31857 - 111
E-Mail: [email protected]
Web: www.puz.de
Halle / Stand 4/B04
Seit 1948 begleiten wir mit GAK Gummi Fasern Kunststoffe die Kautschuk und Kunststoff verarbeitende Industrie sowie deren Maschinen- und Rohstofflieferantenmonatlich mit allen relevanten wissenschaftlichen, technischen und wirtschaftlichen Informationen. Das bedeutet: ca. 12 000 Fachleute - weltweit - lesen GAK.
Mit dem PU Magazin haben wir eine neue Zeitschrift im Verlagsprogramm, die sichseit ihrer Markteinführung im Oktober 2001 in Deutschland und den europäischen Nachbarländern als das neue Informationsforum der Polyurethan-Branche etablieren konnte.
“PU Magazin“Dr. Gupta VerlagAm Stadion 3b
40878 Ratingen, Germany
Tel.: +49 2102 9345 0
Fax: +49 2102 9345 20
E-Mail: [email protected]
Web: www.gupta-verlag.de
Halle / Stand 6/C30 Media Pavilion
P
141
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsReb - Rei
R
Reinforced Plastics reports on all the latest business and technology developments in the global composites industry in all industrial markets – automotive, aerospace,construction, boat building, military/defence, and more.
To apply to receive your free copy of the magazine and our weekly newsletter please visit www.reinforcedplastics.com, where you‘ll also find a range of other products and services.
You can also join Reinforced Plastics on LinkedIn, Twitter and Facebook.
Reinforced Plastics is the official media partner of COMPOSITES EUROPE.
Reinforced Plastics
Elsevier Ltd, The Boulevard, Langford Lane, Kidlington
Oxford Oxfordshire OX5 1GB, United Kingdom
Tel.: 0044 1865 843638
Fax: 0044 1865 843973
E-Mail: [email protected]
Web: www.reinforcedplastics.com
Halle / Stand 6/C30 Media Pavilion
Reichhold is a leading supplier to the global composites industry with 20 manufactu-ring sites (17 operated by Reichhold), 5 technology centres and a number of sales and technical support centres positioned around the world. Reichhold supplies unsaturated polyester resins, gelcoats, bonding pastes and vinyl ester resins under the brand na-mes: POLYLITE®, DION®, NORPOL®, HYDREX® and ENVIROLITE®.
Reichhold AS
Klinestadmoen 9
Sandefjord 3241, Norway
Tel.: +47 3344 8661
Fax: +47 3344 8603
E-Mail: [email protected]
Web: www.reichhold.com
Halle / Stand 4/C28
Die Reichenbacher Hamuel GmbH bietet eine breite Produktpalette an universell ein-setzbaren CNC-Fräsmaschinen für die Holz-, Kunststoff- und Aluminiumbearbeitung. Für Klein-, Mittel- und Großbetriebe werden Maschinen nach einem Baukastensystem konstruiert. CNC-Steuerungen in Mehrkanaltechnik bis hin zur Beschickung der Maschinen durch Roboter von Losgröße 1 bis zur Serienfertigung gehören zum Produk-tionsstandard.
Weltweit sind knapp 4.000 CNC-Maschinen aus dem Unternehmensverbund Hamuel Reichenbacher im Einsatz. Viele Eigenentwicklungen und Patente sind Ausdruck einer hohen Innovationskraft des Unternehmens. Mit seinen etwa 330 Beschäftigten gehört Hamuel Reichenbacher zur weltweit agierenden SCHERDEL Gruppe, die insgesamt mehrals 4.000 Mitarbeiter beschäftigt. Im CNC-Sondermaschinenbau verfügt das 1954gegründete Unternehmen über eine mehr als 50-jährige Tradition, in der 5-Achs und Mehrachs-Technologie über drei Jahrzehnte und mehr Erfahrung.
Reichenbacher HAMUEL GmbH
Rosenauer Str. 32
96487 Dörfles-Esbach, Germany
Tel.: +49 9561 599-0
Fax: +49 9561 599-199
E-Mail: [email protected]
Web: www.reichenbacher.com
Halle / Stand 6/G09
Wir sind offizieller Vertriebspartner der Firma Zünd Systemtechnik AG, Schweiz, mit 30-jähriger Erfahrung in Lege- und Zuschneidetechnik.Die Verarbeitung von flexiblen Materialien - egal ob Carbon- und Glasfasergewebe, technische Textilien, Stoffe, Leder oder Folien - ist unsere Domäne. Deshalb haben wir unser Produkt- und Leistungsangebot primär auf die Anforderungen bei der Verarbei-tung von textilen Materialien und Folien abgestimmt.Wir bieten vollständig integrierte und optimierte Planungs- und Fertigungslösungen.
Zünd G3 Hochleistungscutter für Compositematerial
- Planungs- und Fertigungslösungen - Peripheriegeräte - Kompetente Beratung - Ver-tieb - Service - CAD/CAM - Zuschneidservice
Rebstock Consulting GmbH & Co.KG
Schwalbenweg 22
72461 Albstadt, Germany
Tel.: 07432 983481
Fax: 07432 983480
E-Mail: [email protected]
Web: www.rebstockconsulting.de
Halle / Stand 6/A22
142
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsRes - Roo
R
„Kompozit 21“ www.kompozit21.ru ist ein anerkannter Fachverlag und veröffentlicht mit „construction materials“, „concrete technologies“, „roofing& insulating material“ und „dry mortars & plasters“ gleich 4 der bedeutendsten und auflagenstärksten Bau-fachmagazine in Russland und den GUS.
AK marketing & consult ist die weltweite Exklusivvertretung mit einem Sitz in Deutschland www.krajacic.de
“roofing & insulating material“AK marketing & consultAm Torsee 2
96132 Schlüsselfeld, Germany
Tel.: +49 9552 9294704
E-Mail: [email protected]
Web: www.krajacic.de
Halle / Stand 6/C30 Media Pavilion
Wir sind ein leistungsfähiges Familienunternehmen, bestehen seit 1919 und stellen seitdem hochwertige Scheren her. Heute sind wir spezialisiert auf Scheren für tech-nische Tetilien zum Schneiden von Aramidfaser-, Glasfaser- und Kohlefasergeweben und GFK- und CFK-Verbunden. Mit elektrischen Scheren, pneumatischen Scheren undAkku-Scheren können wir Ihnen zusätzlich viele Lösungen für oft sehr schwierige Schneidanforderungen anbieten. Bringen Sie uns Mustermaterial mit. Wir testen sofort am Stand auf der Messe, wie es am besten geschnitten werden kann.
Robuso StahlwarenfabrikBuntenbach & Sohn GmbHNeuenhofer Str. 75
42657 Solingen, Germany
Tel.: 0212 233625 0
Fax: 0212 233625 21
E-Mail: [email protected]
Web: www.robuso.de
Halle / Stand 6/G31
RH Schneidtechnik
Gasstr. 10-18
42657 Solingen, Germany
Tel.: 0049 212 2354300
Fax: 0049 212 2354301
E-Mail: [email protected]
Web: www.rh-schneidtechnik.de
Halle / Stand 4/PDA_E, 6/A16
Industrieanlagen für rezeptgesteuertes Dosieren, Mischen, Entgasen von festen und/oder flüssigen Komponenten in kontinuierlichem Verfahren. Seit 43 Jahren Gießma-schinentechnologie nach Kundenspezifikation für Industrien weltweit, z.B. für reaktive kunstharzgebundene Massen wie Polymerbeton, Epoxid-Mineralguß, hochgefüllte PUR-Massen, Acrylplatten, u.v.a. Die Produktlinie „VacuCast“ mit patentiertem Vaku-umsystem erlaubt Herstellung blasenfreier Gießmassen und Formteile.
Industrial plants for recipe-controlled metering, mixing, degassing of solid and/orliquid components in continuous process. Since 43 years Casting Machine Technologyaligned to customers´requirements for industries world wide e.g., for resin-bondedmixtures like polymer concrete, epoxy-cast mineral, highly-filler PUR masses, acrylics, and many more. The product line „VacuCast“ with its patented vacuum system allowsproduction of void-free cast mixtures.
RESPECTA Maschinenbau GmbH
Tönisheider Str. 12-16
42489 Wülfrath, Germany
Tel.: +49 2058 89326-0
Fax: +49 2058 89326-20
E-Mail: [email protected]
Web: www.respecta.de
Halle / Stand 6/B25
143
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsRst - Saa
R
Saati Composites is a Division of Saati, a textile-chemical company manufacturingand distributing worldwide technical precison fabrics and chemical products forindustrial applications. Saati Composites is focused on the development, production and distribution of systems for advanced composites, in particular a wide range of traditional, unidirectional and multiaxial fabrics, prepregs with its own formulated and manufactured phenolic, epoxy and ciano-ester resin systems, and laminates. Produc-tion takes place in a modern plant, R&D is supported by state of the art laboratories for mechanial, textile and chemical testing. These facilities are qualified to issue the required certificates of compliance for the company‘s products.
SAATI S.p.A.
Via Milano 14
22070 Appiano Gentile, Italy
Tel.: 0039 031 9711
Fax: 0039 031 933392
E-Mail: [email protected]
Web: www.saati.com
Halle / Stand 6/E28
WIR SAUGEN ALLES!1976 gegründet, zählen wir heute zu den Marktführern bei der Konstruktion und dem Bau von Industriesaugern und Absauganlagen. Der hohe Qualitätsanspruch, den wir an unsere Produkte stellen - wir sind zertifiziert nach DIN EN ISO 9001-2008 - bürgt für Zuverlässigkeit und lange Lebensdauer. Undweil wir beim Bau aller Absauganlagen - unabhängig davon, ob Standard oder maßge-schneidert - auf ein bewährtes Baukastensystem an erprobten Komponenten zurück-greifen, steht der Name RUWAC auch für ein hohes Maß an Wirtschaftlichkeit. Alle Sauger sind vom TÜV oder vom BIA geprüft und zugelassen. Ruwacs Sonderlösungen werden bedarfsgerecht ausgelegt. Abhängig von den räum-lichen Gegebenheiten, der Menge und Beschaffenheit des Saugguts, der Anzahl derSaugstellen und der Sicherheitsanforderungen (zum Beispiel Nassabscheidung, Staub-Ex- und Gas-Ex-geschützte Bauarten) erfolgt die genaue Planung. Die Absaugeinheitund das Rohrleitungsnetz stammt aus dem Hause Ruwac.
RUWAC Industriesauger GmbH
Westhoyeler Straße 25
49328 Melle, Germany
Tel.: +49 5226 9830 0
Fax: +49 5226 9830 44
E-Mail: [email protected]
Web: www.ruwac.de
Halle / Stand 6/B19
RUCKS Maschinenbau GmbH
Auestraße 2
08371 Glauchau, Germany
Tel.: 03763 6003 0
Fax: 03763 6003 30
E-Mail: [email protected]
Web: www.rucks.de
Halle / Stand 6/B26
Wir bieten Ihnen die Ausarbeitung passgenauer, individueller Lösungen im Prototypen-bau sowie die Herstellung von Werkzeugen und Anlagen aus einer Hand. Bei der Herstellung von Bauteilen und in der Materialentwicklung bieten wir Ihnen folgende Leistungen an:
Prototyping, Pressen, Thermoformen, Kaschieren, Stanzen / Beschneiden, Tiefziehen, Schäumen, Automatisieren, Erprobung, Spritzgießen
Wir liefern Bauteillösungen für unterschiedlichste Anforderungsbereiche – ob PKW,Transporter oder LKW. Zudem tragen wir dem wichtigen Aspekt der Gewichtsoptimie-rung durch unsere innovativen Materialkonzepte Rechnung. Auf der Grundlage unserer Technologien erhalten Sie die optimale Lösung für Ihre Produkte. Türverkleidungen, Stirnwandisolation, Bodengruppen inklusive Isolationen, Koffer-raumsysteme, Hutablage, Motorraumsysteme, Dachhimmel-System, Unterbodenschutz,Sitzverkleidungen, Radlaufschalen, Instrumententafel, Class-A Oberflächenbauteile
R+S Technik GmbH
Teutonenstr 2-10
46395 Bocholt, Germany
Tel.: +49 (0)61097123-0
Fax: +49 (0)61097123-99
E-Mail: [email protected]
Web: www.rstechnik.de
Halle / Stand 6/B28
144
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsSae - San
S
Sandvik Process Systems (SPS), part of the Swedish Sandvik Group, is one of the world’s leading suppliers of process systems based on steel belt technology. Our extensive experience of steel belt technologies has also led to the development of specialized single and double belt units for continuous production of high performance composites, laminates, films and foils, materials and synthetic stone/artificial marble. This purpose-designed press technology enables accurate control and adjustment for maximum productivity, efficiency and quality of end product.
Sandvik Process SystemsDivision of SMT Deutschland GmbHSalierstr. 35
70736 Fellbach, Germany
Tel.: 0711 5105 0
Fax: 0711 5105 196
E-Mail: [email protected]
Web: www.processsystems.sandvik.com
Halle / Stand 6/E10
The Society for the Advancement of Material and Process Engineering (SAMPE) provi-des the global forum for information, education and professional fellowship for those who define the leading edge and application of materials and processes advancement. SAMPE is an international professional member society, provides information on new materials and processing technology either via technical forums, journal publications,or books in which professionals in this field can exchange ideas and air their views. As the only technical society encompassing all fields of endeavor in materials andprocesses, SAMPE provides a unique and valuable forum for scientists, engineers, andacademicians.
SAMPE
1161 Parkview Drive
Covina CA 91724, United States
Tel.: +1 626 331 0616
Fax: +1 626 332 8929
E-Mail: [email protected]
Web: www.sampe.org
Halle / Stand 6/C30 Media Pavilion
The SAERTEX Group is a global market leader in the development and production of multiaxial Non-Crimp-Fabrics made of glass, carbon, aramid and other fibres. With plants in Germany, France, Portugal, South Africa, USA, India and China the SAERTEX Group is well placed to meet the world wide rising demand for high-tech reinforcingfabrics. SAERTEX products are used in many market segments including wind energy, aerospace, marine, automotive, sports and leisure, railway systems, pipe relining and civil infrastructure.
SAERTEX GmbH & Co. KG
Brochterbecker Damm 52
48369 Saerbeck, Germany
Tel.: +49 2574 902 0
Fax: +49 2574 902 209
E-Mail: [email protected]
Web: www.saertex.com
Halle / Stand 6/A06
SAE International
400 Commonwealth Drive Warrendale
Warrendale PA 15096-0001, United States
Tel.: +1 724 772 4052
Fax: +1 724 776 0790
E-Mail: [email protected]
Web: www.sae.org
Halle / Stand 4/E31
145
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsSat - Sch
S
Mit über 300 Mitarbeitern gehört Schneider Form im Formenbau und der Produktent-wick-lung zu den führenden Unternehmen in Europa. Als Spezialist für hochwertigeKunststoff- und Druckgussformen entwickeln wir Teile und Werkzeuge bis zum Seri-eneinsatz. Mit Unternehmen in Portugal, England und China sowie Kooperationen in Japan, Indien und den USA sind wir wettbewerbsfähig und immer in Ihrer Nähe. UnsereSchwerpunkte bei Spritzgießwerkzeugen liegen im Außenbereich (Stossfänger) undim Innenbereich (In-strumententafeln). Im Druckgussbereich fertigen wir Werkzeuge für den Antriebsstrang (Kurbelgehäuse) und Strukturbauteile (Rückwandtüren). ImUltraleichtbau haben wir uns auf Pre-Forms, Hochdruck-RTMs und Organoblechwerk-zeuge für CFK-Module speziali-siert (Monocoque). Unsere Stärke ist die Erarbeitungintelligenter und wirtschaftlicher Produkt-, Werkzeug-, und Verfahrenskonzepte mit dem Kunden. www.schneider-form.de
Schneider Form GmbHKunststoff- und DruckgussformenKirchheimer Straße 181
73265 Dettingen, Germany
Tel.: +49 7021 8080 0
Fax: +49 7021 8080 80
E-Mail: [email protected]
Web: www.schneider-form.de
Halle / Stand 6/E06
Unsere Manufaktur-Fertigung
Wir haben uns der Fertigung von Scheren erstklassiger Qualität verschrieben. Die Ver-bindung von harmonischer Formgebung und optimaler Funktionalität garantieren die Langlebigkeit unserer Produkte. Aus Überzeugung sind wir eine Manufaktur, in der ein hoher Anteil traditioneller, handwerklicher Produktion von modernsten Präzisionswerk-zeugen unterstützt wird. Von der Produktentwicklung bis zum Versand erfolgen alle Schritte unter einem Dach.
Im professionellen Umfeld von Handwerk, Manufaktur oder technischen Fachbereichenwird viel von einer Schere verlangt. Sie soll robust sein und in der Lage, starke undschwierige Materialien zu schneiden, bis hin zu technischen Stoffen oder Metall. Sie muss ergonomisch perfekt sein, damit auch wiederholte Arbeitsgänge die Hand nicht ermüden. Und sie muss langlebig sein, um ihre Aufgabe nachhaltig wahrnehmen zu können. Unsere Scheren für Technik und Handwerk erfüllen all diese Anforderungenaufs Beste.
Scherenmanufaktur PAUL GmbH
Hoopweg 7
21698 Harsefeld, Germany
Tel.: + 49 4164 - 8987 - 0
Fax: + 49 4164 - 8987 - 55
E-Mail: [email protected]
Web: www.scherenmanufaktur-paul.de
Halle / Stand 6/A37
Schaumform ist ein technisches Dienstleistungsunternehmen, das auf die Entwicklungvon neuen Leichtbauteilen spezialisiert ist. Schaumform entwickelt für Großkundeninnovative Leichtbaulösungen. Dabei kommen immer thermoplastbasierte Materialien zum Einsatz. Schaumform beginnt beim Produktdesign und liefert einen getestetenund serienreifen Prototypen ab.Einsatzmöglichkeiten: Automotive: Komponenten des Automobilbaus - Outdoor:z. B. Mannschaftssport, Wandern, Laufen, Segeln, Camping - Care: z.B. Prothetik, Altenpflege, Medizintechnik - Craft: Baugewerbe, Handwerk, Garten, Forstwirtschaft,Heimwerken, Landwirtschaft Solutions: TC-Foam: Deutliche Gewichtseinsparung mit Integralschaum und spritzge-gossenem Weichschaum - TC-Shell: Faserverbundstruktur und Verbindungstechnik in einem einzigen Prozessschritt - TC-Volume: Hohlstrukturen aus Gewebematerialien für höchste Steifigkeitsanforderungen - TCPM: Leichtbau auf höchstem Level mitmaßgeschneiderten thermoplastischen Composites.
Schaumform GmbH
Hochleiten 1
94116 Hutthurn, Germany
Tel.: +49 8505 919982 0
Fax: +49 8505 919982 18
E-Mail: [email protected]
Web: www.schaumform.com
Halle / Stand 6/B16
SAT
Savoie Hexapole - Rue Louis Armand BP 59
73420 Mery, France
Tel.: 0033 479617144
Fax: 0033 479617121
E-Mail: [email protected]
Web: www.sat-thermique.com
Halle / Stand 6/E48
146
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsSch - Sch
S
Über den Schuler Konzern Als Technologie- und Weltmarktführer in der Umformtechnik liefert Schuler Maschi-nen, Anlagen, Werkzeuge, Verfahrens-Know-how und Dienstleistungen für die gesamtemetallverarbeitende Industrie sowie für die Verarbeitung faserverstärkter Kunststoffe. Zu den Kunden gehören Automobilhersteller und -zulieferer sowie Unternehmen ausder Hausgeräte- und Elektroindustrie. Weltweit ist das Unternehmen mit über 5.000 Mitarbeitern mit eigenen Standorten und Vertretungen in vierzig Ländern präsent.
Neben zahlreichen Auslandstochtergesellschaften gehört u. a. seit April 2007 MüllerWeingarten zum Schuler Konzern.
Schuler SMG GmbH & Co. KG
Louis-Schuler-Str. 1
68753 Waghäusel, Germany
Tel.: 07254 988-563
Fax: 07254 988-233
E-Mail: [email protected]
Web: www.schulergroup.com
Halle / Stand 6/D10
SondermaschinenbauSchüchl Maschinenbau
Am Grasfeld 2
86564 Brunnen, Germany
Tel.: 08454 3170
Fax: 08454 3880
E-Mail: [email protected]
Web: www.schuechl.de
Halle / Stand 4/A31
Wir fertigen Doppelbandpressen in Verbindung mit der Thermofix-Technologie, sowie Maschinen und Anlagen für die Vliesverfestigung, Wärmebehandlung und Trocknung.Unsere kontinuierlich arbeitende Doppelbandpresse mit anschließender Kühlungermöglicht das Verdichten und Konsolidieren von unterschiedlichsten Materialien auf hohe Raumdichten bei gleichzeitiger Oberflächenglättung.
Im selben Arbeitsgang kann auch eine Laminierung oder Kaschierung erfolgen. Dadurch eröffnen wir eine breite Palette an Herstellungsverfahren, insbesondere auch im Be-reich der Herstellung von Composites. Hersteller und Verarbeiter von Wabenstrukturen, Composites, Organoblechen, Hardboards, etc. sind bei uns an der richtigen Adresse.
Schott & Meissner bietet Systemlösungen aus einer Hand!
Fordern Sie uns! Wir freuen uns auf Sie!
Schott & MeissnerMaschinen- und Anlagenbau GmbHRudolf-Diesel-Str. 32
74572 Blaufelden, Germany
Tel.: 07953 885 0
Fax: 07953 885 43
E-Mail: [email protected]
Web: www.schott-meissner.de
Halle / Stand 6/E09
Schönherr is a member of the Stäubli Group, a mechatronics solution provider of Textilemachinery, Connectors and Robotics.
Schönherr offers with its weaving machines ALPHA 400 LEANTEC, ALPHA 500 TECH and D_TECH, three powerful tools for producing heavy fabrics.
The different machine types can handle various fabric widths and can be equipped with a broad range of options and accessories - opening a new wide world of possibil-lities for developers and producers. Virtually no limits to binding structures for plain,Jacquard, multilayer or spacer fabrics woven with any common types of technical yarns.
Each machine is individually configured to specific needs of customer. Thus the mill´s know-how remains confidential and protected.
Schönherr Textilmaschinenbau GmbH
Theodor-Schmidt-Strasse 19
95448 Bayreuth / Germany, Germany
Tel.: +49 (0) 921 883 0
Fax: +49 (0) 921 883 460
E-Mail: [email protected]
Web: www.schoenherr-carpetweaving.com
Halle / Stand 6/D06
147
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsSci - Sgl
S
Die SGL Group - The Carbon Company - ist einer der führenden Hersteller von Pro-dukten aus Carbon und verfügt über ein umfassendes Portfolio an Produkten und Technologien, ein weltweit flächendeckendes Vertriebsnetz und moderne Produktionss-tandorte in Europa, Nordamerika und Asien.
Wir produzieren und vertreiben SIGRAFIL® C Multifilament-Carbonfasern auf PAN-Ba-sis, die als Endlosfaser, Stapelfaser oder mahlgeschnittene Fasern in industriellen Anwendungen eingesetzt werden, sowie thermisch stabilisierte, oxidierte Fasern derMarke PANOX®. Darüber hinaus entwickeln und produzieren wir hochwertige Verbund-werkstoffe wie Gewebe, Gelege, Prepregs und Preforms auf Carbonfaser-Basis, die vor allem für Windenergieanlagen, Sportausrüstung sowie in der Automobil- und Luftfahr-tindustrie verwendet werden.
SGL TECHNOLOGIES GmbH
Werner-von-Siemens-Str. 18
86405 Meitingen, Germany
Tel.: +49 8271 83-2160
Fax: +49 8271 83-1427
E-Mail: [email protected]
Web: www.sglgroup.com
Halle / Stand 4/F01
SELCOM S.r.l.Multiaxial TechnologyVia Della Torre N.17
31010 Fregona, Italy
Tel.: 0039 0438 585166
Fax: 0039 0438 916049
E-Mail: [email protected]
Web: www.selcom-srl.com
Halle / Stand 6/G01
Secar Technologie GmbH
Industriepark 14
8682 Mürzzuschlag-Hönigsberg, Austria
Tel.: 0043 3852 520 0
Fax: 0043 3852 520 09
E-Mail: [email protected]
Web: www.secar.at
Halle / Stand 4/F09
SCIGRIP delivers the latest advancements in bonding systems and adhesive chemistriesfor the most demanding customer applications. Key markets include the marine,transportation, building construction and product assembly markets. SCIGRIP offerscustomers a broader technology platform than ever before and unique adhesive solu-tions are available for bonding a range of substrates including metals, thermoplasticsand thermoset composites. SCIGRIP’s industry-leading technologies include 10:1 and 1:1 Methylmethacrylate (MMA) adhesive pastes, as well as Anaerobic, Cyanoacrylate (CA) and UV cure adhesives. With manufacturing sites in UK and USA locations andan extensive distribution network, SCIGRIP products can be delivered to customers anywhere in the world. Carbon fibre bonding solutions will be a key focus at Composi-tes Europe 2013 and SCIGRIP will be showcasing a range of products.
Scigrip Adhesives Limited
Unit 22, Bentall Business Park Glover Road
Washington TYN NE37 3JD, United Kingdom
Tel.: 004419141964441
Fax: 00441914113192
E-Mail: [email protected]
Web: www.holdtite.com
Halle / Stand 4/E24
148
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsShi - Sie
S
Seit 130 Jahren entwickelt und fertigt Siempelkamp eine große Bandbreite an Pressen für viele Anwendungen. Dieses Wissen ermöglicht es Siempelkamp, konkrete Pressenty-pen für unterschiedliche Deckschichten und Kernmaterialien anzubieten:Einetagenpressen für Postforming Composites - Mehretagenpressen für flächenförmige Wabenplatten - kontinuierliche Pressen für Wabenplatten - Doppelbandanlagen fürSandwichelemente
Since 130 years Siempelkamp develops and manufactures a wide range of presses for many multifaceted applications. This knowledge enables Siempelkamp to offer concrete press types for a variety of facings and core materials: daylight presses for post-forming composites - multi-daylight presses for laminating honeycomb subst-rates - continuous presses for the production of honeycomb substrates - double belt lines for the production of sandwich boards
Siempelkamp Maschinen- und Anlagenbau GmbH & Co. KGSiempelkampstr. 75
47803 Krefeld, Germany
Tel.: +49 (0)8171 402-0
Fax: +49 (0)8171 402-150
E-Mail: [email protected]
Web: www.siempelkamp.de
Halle / Stand 6/B10
Specialized Engineering Software is a business segment within Siemens PLM Softwareand is a leading global provider of specialized engineering software and services that create rich product descriptions for better–informed decision making early in thedesign cycle.
Our offerings enhance 3D CAD platforms by applying specialized process knowledgeand domain expertise to create solutions that solve some of the world‘s most complex engineering problems. Our commitment to openness allows us to work not only in an environment of Siemens PLM Software but also across a broad range of high per-forming, 3D CAD systems. As a result, customers significantly increase their reuse of engineering data and ultimately reduce cost, improve quality, and cut time to market.
Our software and services are focused on the specific requirements of vertical indust-ries and is a strategic supplier to hundreds of the world’s leading manufacturers in the aerospace, automotive, and other industries.
Siemens PLM Software
200 5th Avenue
Waltham MA 02451, United States
Tel.: +1 781 250 6871
Fax: +1 781 250 6803
E-Mail: [email protected]
Web: www.siemens.com/plm/fibersim
Halle / Stand 4/B04
SICOMINEPOXY SYSTEMSBP 23 RN 568
13161 Chateauneuf les Martigues/Cedex, France
Tel.: 0033 442423020
Fax: 0033 442812929
E-Mail: [email protected]
Web: www.sicomin.com
Halle / Stand 4/B41
Shimadzu Europa
Shimadzu ist ein weltweit führender Hersteller in der Materialprüftechnik und instru-mentellen Analytik. Die Geräte und Systeme von Shimadzu sind zentrale Laborwerk-zeuge für die Qualitätskontrolle von Konsum- und Gebrauchsgütern. Sie werden im Gesundheitswesen eingesetzt sowie in allen Bereichen des Umwelt- und Verbraucher-schutzes. Spektroskopie, Chromatographie, Umweltanalytik, Waagen, Biotechnologieund Materialprüfung bilden ein homogenes und gleichzeitig vielseitiges Produktspek-trum. Seit mehr als 90 Jahren entwickelt und produziert Shimadzu Maschinen für diepräzise Bestimmung der physikalischen Eigenschaften unterschiedlicher Materialien und Verbundwerkstoffen. Neben den statischen Prüfmaschinen bietet Shimadzu auch ein reichhaltiges Programm an dynamischen Universalprüfmaschinen, Mikro- undUltramikrohärteprüfern sowie darauf optimal abgestimmte Software und Zubehöre.
Mehr Informationen und Kontakt: www.shimadzu.eu [email protected]
Shimadzu Europa GmbH
Albert-Hahn-Straße 6 -10
47269 Duisburg, Germany
Tel.: +49 203 7687 0
Fax: +49 203 7666 25
E-Mail: [email protected]
Web: www.shimadzu.eu
Halle / Stand 6/G27
149
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsSig - Skm
S
Die SKM GmbH ist ein mittelständisches Unternehmen, das in der dritten Generationan zwei Standorten in Nordrhein-Westfalen und Sachsen geführt wird und war an-fangs in der Konfektion von PVC-beschichteten Geweben tätig. Durch die Vielfalt derProdukte von Schutztüchern, Kunststofftaschen und Industrie-Abdeckungen, ist eine Verbindung zu pulverbeschichtetem Metallprodukten entstanden wie Transportkarren und Verkaufsdisplays, die das Unternehmen für internationale Kundschaft herstellt. Die Marktentwicklung stellt immer höhere Anforderungen an Herstellung, Qualität undSicherheit. Die SKM GmbH – mit der Marke „made in Germany“ – wird diesen Ansprü-chen gerecht.
Als neustes mit der TU Chemnitz entwickeltes Produkt ist der thermoplastische Faser-kunststoffverbund OLU_Preg entwickelt worden, der durch seine guten Verarbeitungs-möglichkeiten sowie technischen Eigenschaften überzeugt. Gerne beraten wir Sie an unserem Messestand
SKM GmbHSchwergewebe Konfektion Moers GmbHParsickstr. 39
47441 Moers, Germany
Tel.: +49 (0)2841-94295-0
Fax: +49 (0)2841-94295-20
E-Mail: [email protected]
Web: www.skm-moers.de
Halle / Stand 4/F03
SILTEX is one of Europes‘ largest manufacturer of braided goods and a highly efficient supplier of insulation and protective sleeves with more than 55 years of experience. Our high flexibility, combined with most modern materials and large machinery enab-les us to develop individually a product co-ordinated with you. Whether prototyping,customizing, or series production - we guide and advise you about braided products.
Your big advantages of our braids are the serviceability in most different ranges asreinforcement material for production of light and high debitable high-tech-composi-tes. Also for subsequent treatment of electrical and thermal insulation.
For sure SILTEX is certified in accordance to DIN EN ISO 9001 ed. 12/2000.
SILTEX Holzmüller W. GmbH & Co KGFlecht-u. IsoliertechnologiePalmstr. 27
84387 Julbach, Germany
Tel.: 08571 922 97 0
Fax: 08571 922 97 22
E-Mail: [email protected]
Web: www.siltex.de
Halle / Stand 4/B15
Seit der Gründung im Jahre 1910 durch Kaspar Winkler hat sich Sika zu einem welt-weit operierenden Unternehmen der Spezialitätenchemie im Bereich Bau und Industrie mit mehr als 13.500 Mitarbeitern in über 70 Ländern entwickelt. Integriert in diesen starken Konzern entwickelt und produziert Sika Tooling & Compo-sites kundenspezifische Produkte zur Herstellung von Modellen und Formen, sowie fürden Werkzeugbau und zur schnellen Anfertigung von Prototypen und kleinen bis mittlerenSerienteilen.Die Produktrange für den Composite-Bereich umfasst dabei Hochleistungs-Mat-rixwerkstoffe auf EP- und PU-Basis, die viskositätsoptimiert in verschiedenen Tempera-turbereichen für unterschiedliche Anwendungsverfahren (RTM, Vakuuminfusion, Pultrusion, FilamentWinding, Wet-lay-up,…) entwickelt worden sind. Die Systeme können zudem kun-denspezifischen Anforderungen und Prozessen angepasst werden.
Sika Deutschland GmbH
Stuttgarter Str. 139
72574 Bad Urach, Germany
Tel.: 07125 940 492
Fax: 07125 940 401
E-Mail: [email protected]
Web: www.toolingandcomposites.sika.com
Halle / Stand 4/A24
Sigmatex develops and manufactures carbon fibre textiles for composite material ap-plications. From global locations, Sigmatex supplies spread tow, 2D woven, unidirectio-nal, multiaxial (non-crimp), 3D and recycled textiles across a broad range of industries.
Sigmatex‘s proven capability converts millions of pounds of carbon fibre each year for major projects that require high levels of quality and reliability.
Sigmatex works with customers to create carbon fibre textiles which meet various requirements including fibre orientation, crimp, drapeability, thickness and resin permeability. These textile solutions often require an innovative approach to textiledesign and process which is the core strength of Sigmatex.
Sigmatex (UK) Ltd
Manor Farm Road, Norton
Runcorn Cheshire WA1 ITE, United Kingdom
Tel.: +44 1928 510050
Fax: +44 1928 510051
E-Mail: [email protected]
Web: www.sigmatex.com
Halle / Stand 4/F05
150
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsSkz - Spr
S
Springer DE ist der führende Anbieter für klassische und digitale Lehr- und Fachme-dien in den Bereichen Wirtschaft, Naturwissenschaften, Technik und Gesellschaft im deutschsprachigen Raum. Das Portfolio umfasst hochwertige Inhalte in unterschiedli-chen medialen Formen: gedruckte Bücher und eBooks, Zeitschriften, Online-Angebote sowie Veranstaltungen. Springer DE ist Teil der Fachverlagsgruppe Springer Science+-Business Media, einer der international führenden Verlagsgruppen für Wissenschafts-und Fachliteratur.
Springer Fachmedien Wiesbaden GmbH
Abraham-Lincoln-Str. 46
65189 Wiesbaden, Germany
Tel.: 0611 7878 0
Fax: 0611 7878 412
E-Mail: [email protected]
Web: www.springer.de
Halle / Stand 4/A04, 6/C30 Media Pavilion
Spheretex ist der führende Hersteller von leichten Kernmaterialien. Anwendungsbe-reiche sind sowohl offene als auch geschlossene Verfahren, dabei können Epoxid-,Polyester- und Vinylesterharze Verwendung finden.Hergestellt werden die Kernwerkstoffe aus Garnen, Vliesen, Geweben oder Multiaxials,die mit gewichtsreduzierenden Mikrospheren ausgerüstet sind. Durch die Kombinationvon Glasverstärkung und Kernmatarial sind einlagige Systeme möglich. Eigenschaften sind eine exzellente Harzdurchtränkung und hervorragende Drapierfä-higkeit. Es entstehen Sandwich-Laminate mit einer perfekten Oberfläche und geringer Dichte.
Spheretex GmbH
Ellerstr. 101
40721 Hilden, Germany
Tel.: 02103 5899-3
Fax: 02103 5899-58
E-Mail: [email protected]
Web: www.spheretex.de
Halle / Stand 4/C28
Spintech, LLC provides revolutionary shape memory polymer technologies for composi-te manufacturing and structural repairs in aerospace, energy, automotive, defense, and consumer markets.
Our patented Smart Tooling technology allows us to provide companies with configu-rable, reusable tooling for fabricating composite parts with complex geometries and/or trapped features that drastically reduce their labor and capital costs, while dramati-cally increasing production rates.
Smart Tooling
1150 S. Patton St
Xenia OH 45385, United States
Tel.: 001 937 912 3250
Fax: 001 937 372 3049
E-Mail: [email protected]
Web: www.spintechventures.com
Halle / Stand 6/G39b
Das SKZ ist eine neutrale und unabhängige Einrichtung, die sich hauptsächlich mit derForschung und Entwicklung, der Prüfung sowie der Aus- und Weiterbildung von Fach- und Führungskräften auf dem Gebiet der Kunststoffe befasst. Seit nunmehr 50 Jahrenist das SKZ Partner der Kunststoffbranche für die Bereiche Forschung und Entwicklung neuer Produktionstechniken und -verfahren, Prüfung und Zulassung von Kunststoff-produkten und Entwicklung innovativer Prüfverfahren sowie neuer Materialien mitanwendungsspezifisch optimierten Eigenschaften. Das SKZ verfügt mit dem Kompetenz-Zentrum für Faserverbundtechnik am Standort in Halle über langjährige Erfahrungen in der Technologie der Faserverbundkunststoffe. Vor allem die Verarbeitung von GFK und CFK aber auch das Verbinden von FVK mittels der Klebtechnik und der gestalterische Einsatz von FVK in Architektur und Industrie-design sind Kerngebiete der dortigen Weiterbildungs- und Forschungsaktivitäten.
SKZ - Das Kunststoff-Zentrum
Köthener Str. 33 a
06118 Halle, Germany
Tel.: +49 345 53045-05
Fax: +49 345 53045-22
E-Mail: [email protected]
Web: www.skz.de
Halle / Stand 4/E22
151
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsSta - Suc
S
Suchy Textilmaschinenbau GmbH
Heidelberger Str. 13
07554 Korbußen/Thür., Germany
Tel.: 0049 36602134-0
Fax: 0049 36602134-10
E-Mail: [email protected]
Web: www.suchy-textil.de
Halle / Stand 4/F11
Stükerjürgen Aerospace GmbH & Co. KG
Grüner Weg 4
33397 Rietberg-Varensell, Germany
Tel.: 05244 40 4 1
Fax: 05244 40 4 844
E-Mail: [email protected]
Web: www.sac.stuekerjuergen.de
Halle / Stand 6/E46
Textile solutions for technical applications as: composites, construction work, personal protection, heat protection, high temperature solutions
Different technologies aviable.
Hersteller technischer Textilien mit unterschiedlichen Herstellungstechnologien
Anwendungsgebiete: Bautextilien,Geotextilien, Schutztextilien, Solarthermie, Hitze-schutzanwendungen
Rohstoffe: Basalt, synthetische Polymere
STS - Textiles
Muldenberger Str. 4
08223 Grünbach, Germany
Tel.: 0151 1723 6099
Fax: 004937457517-22
E-Mail: [email protected]
Halle / Stand 4/D03
Stäubli Connectors ist einer der weltweit führenden Hersteller von Schnellkupplungen, Multikupplungen sowie Werkzeugwechselsystemen für Roboter und Schnellspannsyste-men für die Kunststoffindustrie.
Gezielt nach den jeweiligen Anforderungen, bietet Stäubli standardisierte und indi-viduelle Systemlösungen an. Diese innovativen Lösungen werden in den unterschied-lichsten Industriezweigen eingesetzt.
Stäubli Connectors is one of the worlds leading manufacturer of quick couplings,multi couplings, robot tool changers and quick mould change systems for the plastic industry.
Stäubli offers standardized and individual solutions specifically for respective require-ments. These innovative solutions are used in various industries.
Stäubli Tec-Systems GmbHConnectorsTheodor - Schmidt - Str. 25
95448 Bayreuth, Germany
Tel.: 0921 883 -80
Fax: 0921 883-12070
E-Mail: [email protected]
Web: www.staubli.com
Halle / Stand 6/D06
152
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsSup - Tai
S
Taixing Youngsun FL-Plastics Co., Ltd was founded in the year of 1990. It is located in Dasheng Industrial Zone,Taixing City,Jiangsu Province. After so many years‘ develop-ment, Youngsun is now a professional manufacturer specialized in processing PTFE andrelated fluorine chemical products and covering an area of 20000 square meters withmore 200 employees.
Taixing Youngsun FL-Plastics Co., Ltd.
Western End of South Third Ring Road
Taixing JNGS 225441, China
Tel.: +86 1370 1437 298
Fax: +86 523 8759 3398
E-Mail: [email protected]
Web: www.ptfe-fabrics.com
Halle / Stand 6/B36e
SWMS Systemtechnik Ingenieurgesellschaft mbH is a consulting and technologycompany in the area of software conception and development and virtual product development. Since 1996, SWMS has been assisting their customers to make complex engineering processes more professional, efficient and the treatment of resources considerably gentler.As experts in the “PLM/CAx” area, SWMS optimizes production from design to manu-facturing. Among other services, SWMS offers CAD/CAM-solutions for the automated production of fibre composites, such as Placement and Tape Laying. SWMS-solutions are based on the OEM PLM-standards CATIA V5 of Dassault Systèmes and NX of Siemens PLM Software which is why they fit perfectly into the process and softwarelandscape.Particularly special purpose machine and plant manufacturers benefit from the solu-tions SWMS delivers. As system integrators, they are now able to offer their customersthe whole package from one single source.
SWMS SystemtechnikIngenieurgesellschaft mbHDonnerschweer Str. 4a
26123 Oldenburg, Germany
Tel.: 0441 96021 0
Fax: 0441 96021 21
E-Mail: [email protected]
Web: www.swms.de
Halle / Stand 6/E36
SWAP Sachsen GmbH ist der spezialisierte Industriebetrieb für die Herstellung von formstabilen Papierverbundsystemen mit Sinuswabenstruktur. Das Papierverbundsystem als Leichtbauwerkstoff kombiniert in perfekter Weise hoheStabilität mit geringstem Raumgewicht und einfachstem Handling. Dank dieser hervor-ragenden Eigenschaften gibt es nahezu unbegrenzte Anwendungsmöglichkeiten.
Auf modernsten Produktionsstraßen werden hochwertige Grundprodukte für die Au-tomobil-Industrie, Möbel & Inneneinrichtungen, Display- und Messebau, Bauindustrie sowie Speziallösungen für die Verpackungsbranche hergestellt.
Die neutrale, natürliche Substanz der Wabenplatten lässt den Verbund mit Schäumen, Harzen sowie Deckmaterialien wie Vliesen, Holzwerkstoffen, Metall oder Kunststoffen zu.
Weitere Produktvorteile sind die ökologische Nachhaltigkeit, einfache Bearbeitung,individuelle Formgebung sowie FSC-Zertifizierung und Erweiterung der Designmöglich-keiten.
SWAP (Sachsen) GmbHVerbundwerkstoffeGewerbering 7
09669 Frankenberg, Germany
Tel.: +49 (0) 3 72 06 - 86 80
Fax: +49 (0) 3 72 06 - 86 89 0
E-Mail: [email protected]
Web: www.swap-sachsen.de
Halle / Stand 4/E17
superTEX composites GmbH
Moritzenstraße 25
6410 Telfs, Austria
Tel.: +43-526221465
Fax: +43-526221465
E-Mail: [email protected]
Web: www.supertex.at
Halle / Stand 6/D37
T
153
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsTam - Teb
T
Tebis ist ein weltweit agierendes Software-Unternehmen, das CAD/CAM-Systeme für den Modell-, Formen- und Werkzeugbau entwickelt, schlüsselfertig liefert und daneben den kompletten Full-Service rund um die Software mit Installation, Schulung und Hot-line-Betreuung anbietet. Darüber hinaus können Sie sich von den Tebis CAD/CAM-Pro-fis selbstverständlich auch in Ihren speziellen Anwendungsfragen beraten lassen.
Tebis AG
Einsteinstr. 39
82152 Martinsried/Planegg, Germany
Tel.: 089 81803 0
Fax: 089 818038200
E-Mail: [email protected]
Web: www.tebis.com
Halle / Stand 6/C15
TCR™ Composites is a supplier of prepreg composites products, available in continuous tow/roving for filament winding, woven and stitched fabrics, braided sleevings and uni-directional tapes. Resin content, resin flow during cure and tack levels can be modified to suit process requirements. Distinguishing characteristics of TCR™ Prepregs include up to one year out-life at room temperatures (75F/24C) without changes in material properties. Refrigerated shipping and storage are not required. Adhesive film is also available.
TCR Composites
219 North 530 West
Ogden UT 84404, United States
Tel.: +1 801 622 3800
Fax: +1 801 622 3809
E-Mail: [email protected]
Web: www.tcrcomposites.com
Halle / Stand 4/B11
Weltweite Beratung - Herstellung - Verkauf - After Sales Service, von Ein- und Mehrkomponenten Dosier- und Mischanlagen für die einfache und sichere Verarbeitung von flüssigen und pastösen Kunstharzen aus Epoxydharzen, Po-lyurethanen und Silikonenseit 1981/82
Worldwide Advice - Production - Sales - After Sales Service,of one- and multi-component metering and mixing machines for the easy and safeapplication of liquid and pasty resins from epoxy resins, polyurethanes and silicones since 1981/82
TARTLER GmbH
Relystr.48
64720 Michelstadt, Germany
Tel.: +49 (0) 60 61 - 9672 0
Fax: +49 (0) 60 61 - 9672 295
E-Mail: [email protected]
Web: www.tartler.com
Halle / Stand 6/D08
TAMSEN MARITIM verfügt mit Europas größtem 5-Achs-CNC-Fräszentrum über einehochmoderne Produktionsstätte zur Komplettbearbeitung vielfältiger Bauelemente und zur Herstellung großer Compositebauteile bis zu 70 Meter Länge an einem Stück fürWindkraftanlagen, Fassadenelemente, Yachten und Spezialfahrzeuge.
Ob hochfeste Urmodelle, Formwerkzeuge, Sonderbauteile, Kunstobjekte oder Indus-triegroßkomponenten - TAMSEN MARITIM ist mit den Fähigkeiten eines modernen,kompakten Komposit-Fachbetriebes bestens für alle individuellen Design & Systemlö-sungen in höchster Präzision ausgestattet.
In enger Zusammenarbeit mit Ihrem Unternehmen entwickelt unser Team auf Wunsch die Konstruktion, Laminatberechnung und Auslegung Ihrer Bauteile. Die direkte Wasseranbindung unseres Firmengeländes an die Ostsee ermöglicht einen
unkomplizierten Transport großer und sehr großer Bauteile auf dem Seeweg.
Weitere Informationen erhalten Sie auf unserer Internetseitewww.tamsen-maritim.de
TAMSEN MARITIM GmbH
Maritimstraße 1
18147 Rostock, Germany
Tel.: +49 381 6581 0
Fax: +49 381 6581 104
E-Mail: [email protected]
Web: www.tamsen-maritim.de
Halle / Stand 4/F24
154
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsTec - Ter
T
TERRUZZI FERCALX SPA, with its 116 years of History, is a worldwide oriented en-gineering and fabrication Company realizing industrial plants having its proprietary process technologies. Over eleven decades experience in design, manufacturing and commissioning of Autoclaves, make today TERRUZZI FERCALX SPA a leader in field of AUTOCLAVE for several applications such as:Aeronautical, Aerospace, Automotive, Transport, Impregnation of rotors and motors TERRUZZI Division proposes to the Customer different tailored as: Supply of turn-key plants, Complete supply of equipment, engineering and supervisionservice during erection and plant start-up. Engineering and key equipment only, Partnership for special projects, Feasibility stu-dies. The Company realize internally the control system of the AUTOCLAVE whose configura-tion can be totally integrated into “Factory Business Control”.
Terruzzi Fercalx S.P.A
Viale Lombardia 7
24050 Spirano (BG), Italy
Tel.: 0039 0354879811
Fax: 0039 0354879800
E-Mail: [email protected]
Web: www.terruzzifercalxgroup.com
Halle / Stand 6/E01
TenCate Advanced Composites is an industry leader in the development and production of thermoset and thermoplastic composite prepregs. Its’ product portfolio is incorpo-rated into motorsport and automotive products, aerospace, high end industrial, marineand recreational applications. Key brands include TenCate Cetex® and CFRT thermo-plastics and TenCate AmberTool™ tooling prepregs. TenCate Advanced Composites has production facilities and operations in Europe, North America, and Asia.
Through the recent acquisition of Amber Composites Ltd. in the U.K., TenCate’s com-posite tooling range and pedigree has been strengthened. In addition, the TenCate Advanced Composites group has one of the largest independent core processing facili-ties in Europe. Aluminium, Nomex® and Flex-Core® honeycomb are offered with rapid turnaround time to support customer production needs. Kevlar® honeycomb is alsoavailable in addition to syntactic core offerings.
www.tencate.com/www.ambercomposites.com
TenCate Advanced Composites
Campbellweg 30 P.O. Box 9
7440 AA Nijverdal, The Netherlands
Tel.: +31 548 633 933
Fax: +31 548 633 299
E-Mail: [email protected]
Web: www.tencate.com
Halle / Stand 4/B34
Am Fachgebiet Kunststofftechnik werden im Bereich der Verbundstrukturen Mehrkom-ponententechnik, Verbundwerkstoffe und hybride Materialkombinationen betrachtet.Dieser Themenkomplex ist mit dem Thüringer Innovationszentrum Mobilität verbunden. Neben Herstellverfahren für aus faserverstärkten Kunststoffen bestehende Produktewird an der Konzeption und Herstellung von Bauteilen für die Automobilindustrievor dem Hintergrund des Leichtbaus gearbeitet. Dabei werden einerseits Sicherheit-saspekte, vor allem aber innovative Ansätze zur Gewichtsreduzierung in Fahrzeugen verfolgt, die besonders bei der Elektromobilität wichtig sind. Dies wird durch die Fa-serverbundtechnik erreicht, wodurch je nach Materialkombinationen Festigkeiten undSteifigkeiten von Bauteilen für z.B. Strukturelemente und Verkleidungskomponenten gesteigert werden. Im Bereich des FVK-Leichtbaus werden auch Einsatzmöglichkeitenim Maschinen- und Anlagenbau und die Entwicklung von zuverlässigen Auslegungsre-geln verfolgt.
Technische Universität IlmenauFakultät Maschinenbau - Fachgebiet KunststofftechnikGustav-Kirchhoff-Straße 5
98693 Ilmenau, Germany
Tel.: 03677/693344
Fax: 03677/691597
E-Mail: [email protected]
Web: www.tu-ilmenau.de/kti
Halle / Stand 4/C22
Die TU Dresden ist eine der Spitzenuniversitäten Deutschlands und Europas: stark inder Forschung, erstklassig in der Vielfalt und der Qualität der Studienangebote, eng vernetzt mit Kultur, Wirtschaft und Gesellschaft.
Das Institut für Leichtbau und Kunststofftechnik (ILK) der TU Dresden führt umfang-reiche Forschungsarbeiten auf dem Gebiet beanspruchungsgerechter Leichtbaustruktu-ren und -systeme durch. Dabei wird ein werkstoff- und produktübergreifender Ansatzzu Grunde gelegt, der durchgängig die gesamte Entwicklungskette – Werkstoff, Kons-truktion, Simulation, Fertigung, Prototyp, Test, Qualitätssicherung, Kosten – umfasst. Entsprechend breit ist fachlich und personell das ILK-Team aufgestellt.
Darüber hinaus arbeitet das Institut in Netzwerken einschlägiger Forschungsinstitute, etwa im Cluster Hochleistungsleichtbau Dresden, dem „European Centre for Emerging Materials and Processes Dresden“ (ECEMP) oder im Materialforschungsverbund Dres-den (MFD).
Technische Universität DresdenInstitut für Leichtbau und Kunststoff-technikHolbeinstraße 3
01307 Dresden, Germany
Tel.: 0351 46338142
Fax: 0351 46338143
E-Mail: [email protected]
Web: www.tu-dresden.de/mw/ilk
Halle / Stand 4/C22, PDA_Foyer_4
155
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsThe - Toh
T
Toho Tenax Europe GmbH ist Hersteller von Kohlenstofffasern – Filamentgarn undKurzfasern – sowie Kohlenstofffaser-basierten Halbzeugen. Seit 1986 werden am deut-schen Standort Kohlenstofffasern produziert – heute besteht auf 4 Produktionslinieneine Jahreskapazität von 5.100 Tonnen.
Basierend auf den langjährigen Erfahrungen in der Kohlenstofffaserproduktion bieten wir Halbzeuge für verschiedene Verarbeitungsverfahren an: Textilien mit spezieller Ausrüstung, konturnahe Preforms, die in einem automatisierten Verfahren direkt aus Kohlenstofffaser-Filamentgarn hergestellt werden, thermoplastische Prepregs sowie konsolidierte Platten.
Die Toho Tenax Gruppe ist mit einer Jahreskapazität von 13.900 Tonnen einer der weltweit führenden Hersteller von Kohlenstofffasern. Durch die enge Zusammenarbeitinnerhalb der Gruppe bieten wir die ganze Palette moderner Hochleistungsmaterialienaus Kohlenstofffasern. Bei uns finden Sie Lösungen für die unterschiedlichsten Anwen-dungsgebiete.
Toho Tenax Europe GmbH
Kasinostr. 19-21
42103 Wuppertal, Germany
Tel.: 0202 32 2339
Fax: 0202 32 2360
E-Mail: [email protected]
Web: www.tohotenax-eu.com
Halle / Stand 4/C12
Company Profile
TK Industries GmbH, a member of the Mitsubishi Rayon Group, located in Selbitz,Bavaria, Germany. It was established in 2008 and is the leader in the conversion of commercial grade (large tow) carbon fibre into performance multi-axial fabrics forindustrial applications, in particular for the automotive market. All the long-serving employees of TK Industries have accumulated an expertise in the carbon fibre industry, like wise in the emerging fields of industrial carbon fibre applications. The companyfocuses on the large tow grades of carbon fibre due to their better availability and that they are less affected by the demand / supply cycles of the so called standard towcarbon fibres. This enables the partners of TK Industries to take advantage of both cost and availability, which are critical for new or developing industrial applications.
TK Industries GmbH
Feldstraße 35
95152 Selbitz, Germany
Tel.: 09280984471
Fax: 09280981470
E-Mail: [email protected]
Halle / Stand 6/B04
Tissa Glasweberei AG
Webereistr. 9
5727 Oberkulm, Switzerland
Tel.: 0041 627688666
Fax: 0041 627688668
E-Mail: [email protected]
Web: www.tissa.ch
Halle / Stand 4/A01
ThermHex Wabenkerne aus Polypropylen Die neue Generation Leichtbaumaterial – Made in Germany Die ThermHex Waben GmbH mit Sitz in Halle a.d. Saale bietet Herstellern von Leichtbau Sandwichelementen einen völlig neuen Typ der bewährten Wabenkerne ausPolypropylen (PP) an. Ob zur Herstellung von Paneelen für LKW Kastenaufbauten, obim Innenausbau von Schiffen oder für moderne Schwimmbecken, ThermHex PP Waben sind vielseitig einsetzbar.
Das revolutionäre ThermHex Verfahren zur kontinuierlichen Wabenkernproduktion unterstützt dabei die besonders wirtschaftliche Fertigung von Sandwichelementen. Esermöglicht den Einsatz von Wabenkernen selbst in Bereichen, in denen diese, meist ausKostengründen, bisher noch nicht verwandt werden.
Die ThermHex Waben GmbH wurde im Jahre 2009 gegründet und ist Lizenznehmer derEconCore NV aus Leuven (Belgien), dem Technologieführer für kosteneffiziente Sand-wichmaterial-Produktionstechnologien.
ThermHex Waben GmbH
Marseburger Str. 237
06130 Halle/Saale, Germany
Tel.: +49 (0) 345 13 16 2710
Fax: +49 (0) 391 25 44 963
E-Mail: [email protected]
Web: www.ThermHex.com
Halle / Stand 6/E38
156
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsTop - Tra
T
Die Trans-Textil GmbH ist Hersteller der lizenzierten Membransysteme für dasVAP®-Verfahren (Vacuum Assisted Process) und von EADS autorisierter Lizenzgeber.Mit dem luftfahrtqualifizierten VAP®-Membransystem C2003 bietet Trans-Textil ein hochtemperaturbeständiges Material für die zuverlässige Entgasung in der mem-branunterstützten Harzinfusionstechnologie. Die bauteilorientierte Konfektion vonVAP®-Membransystemen und weiterer Hilfsstoffe erlauben die gezielte Anpassung des gesamten Aufbaus an komplexe und großflächige Geometrien sowie eine deutliche Zeit- und Kostenersparnis.
Trans-Textil GmbH is one of Europe’s technology leaders in the production of high-quality, functional textile solutions. The company is manufacturer of licensed membrane systems for the VAP® vacuum assisted process, and it has been authorised by EADS to grant licences for VAP® use.
www.vap-info.com
Trans-Textil GmbH
Pommernstr. 11 - 13
83395 Freilassing, Germany
Tel.: 0049 8654 6607 0
Fax: 0049 8654 6607 10
E-Mail: [email protected]
Web: www.trans-textil.de
Halle / Stand 4/B12
TPRC, the ThermoPlastic composites Research Center in the Netherlands, is an inno-vation, research- and development center that focuses exclusively on thermoplasticcomposites for a broad range of end use markets.
TPRC executes joint development projects on new thermoplastic composite technolo-gies and applications for its industrial members. In these projects TPRC takes into ac-count materials, processing and design aspects. Next to these joint generic technology projects, TPRC also executes specific projects for its members or external parties andoffers consultancy for thermoplastics composites.
TPRC is an independent organisation, accessible to all parties from different valuechains in the thermoplastic composites sector, like raw material suppliers, engineering and design bureaus, production organisations, machine suppliers as well as educationand research institutes.
TPRCTHERMOPLASTIC COMPOSITES RESEARCH CENTERPalatijn 15
7521 PN Enschede, The Netherlands
Tel.: +31 (0)88 - 8773877
Fax: +31 (0)88 - 8773899
E-Mail: [email protected]
Web: www.tprc.nl
Halle / Stand 4/B36
Toray is the world leader in high performance carbon fiber manufacturing, with atoday‘s global production capacity of 21.100 tons. Toray Carbon Fibers Europe, European subsidiary of Toray Group Industries Inc. pro-duces and sells Torayca carbon fibers, composites materials prepregs for the aviation &space industries, sports and recreational activities, as well as industrial applications.
Toray International Europe GmbH
Hugenottenallee 175
63263 Neu-Isenburg, Germany
Tel.: 06102 7999 0
Fax: 06102 7999 291
E-Mail: [email protected]
Web: www.toray.de
Halle / Stand 4/D16
Zuschnittsysteme von topcut-bullmer mit Zu- und Absortiertechnologie sind die ersteWahl für Hersteller, die ihr Material präzise zuschneiden müssen. Lösungen von top-cut-bullmer schneiden das Material in verschiedenen Breiten, mehreren Lagen und inunendlicher Länge.
Auf der Composites Europe präsentieren wir unseren neuen Einzellagen-Cutter PREMI-UMCUT. Er schneidet nahezu alle Materialien im Bereich Composites und technische Textilien. Außerdem verfügt er über eine modulare Bauweise mit großer Werkzeugviel-falt und erreicht eine sehr hohe Produktivität (2m/s).
topcut-bullmer hat seinen Sitz im süddeutschen Mehrstetten und steht für Qualität und Service. Die Technologie aus dem Haus topcut-bullmer wird außerdem von über 35 Partnern in mehr als 50 Ländern weltweit vertreten. Damit bieten wir ein globales Sales- und Supportnetzwerk. Mehrere Tausend Unternehmen gehören heute zum festen Kundenstamm.
Schauen Sie vorbei - am Stand 6/A12 oder unter www.topcut-bullmer.com!
topcut-bullmer GmbH
Heutal 7 Industriegebiet
72537 Mehrstetten, Germany
Tel.: 07381 183 0
Fax: 07381 723
E-Mail: [email protected]
Web: www.topcut-bullmer.com
Halle / Stand 6/A12
157
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsTub - Umi
U
Umicore is a global materials technology group. It focuses on application areas where its expertise in materials science, chemistry and metallurgy makes a real difference.Umicore Specialty Materials Brugge (USMB) has a long tradition in the development and production of liquid and solid Cobalt and non Cobalt-organic components, disper-sions and naphthenic acids.For the polyester industry, USMB makes accelerators based on cobalt, copper and potassium, under the trade name Valirex. Additionally Umicore has developed and produces its non-toxic cobalt alternative, ECOS ND15, based on cobalt polymer. ECOS ND15 is the one-to-one, drop-in replacement for traditional cobalt accelerators, and is fully REACh compliant.We combine our competences in chemistry and materials science with a thoroughunderstanding of our customers‘ needs, applications and systems.Umicore was ranked as the most sustainable company in the Corporate Knights’ Global 100 Most Sustainable Corporations World index.
Umicore Specialty Materials Brugge
Kleine Pathoekeweg 82
8000 Brugge, Belgium
Tel.: +32 50 320 720
Fax: +32 50 316 047
E-Mail: [email protected]
Web: www.usmb.be
Halle / Stand 4/E35
Technische Universität DresdenInstitut für Werkzeugmaschinen undSteuerungstechnikHelmholtzstraße 7a
01069 Dresden, Germany
Tel.: 0351 4633 4358
Fax: 0351 4633 7073
E-Mail: [email protected]
Web: www.imw.info
Halle / Stand 4/C22
TU ChemnitzInstitut für Strukturleichtbau und KunststoffverarbeitungReichenhainer Straße 41
09126 Chemnitz, Germany
Tel.: +49 371 531 36681
Fax: +49 371 531 836681
E-Mail: [email protected]
Web: www.leichtbau.tu-chemnitz.de
Halle / Stand 4/F03
Tubus Waben GmbH & Co. KG produziert Kunststoffwaben auf Basis von Polypropylen. Tubus Honeycomb PP sind Kernmaterialien für die Herstellung von Sandwichkonstruk-tionen in der Kunststoffverarbeitung und im Leichtbau.Hauptanwendungsgebiete: - Automobilbau - Nutzfahrzeugtechnik- Transportwesen - Bauwesen - Bootsbau- Windenergie - Schienenfahrzeugbau
TUBUS WABEN. EXTREM LEICHT. EXTREM FEST. DIE INNOVATIVEN KERNE FÜR DEN LEICHTBAU:
TUBUS WABEN GmbH & Co.KG
Industrie und Gewerbegebiet 11
07426 Königsee - Rottenbach, Germany
Tel.: 036739 318 0
Fax: 036739 318 88
E-Mail: [email protected]
Web: www.tubus-waben.de
Halle / Stand 6/D36
T
158
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsUni - Uni
U
Die Universität Rostock wurde 1419 gegründet und ist mit ihren heute fast 600 Jahren die drittälteste Hochschule in Deutschland. Zurzeit sind etwa 15.000 Studierende an der Universität eingeschrieben. Zehn Fakultäten bieten mit 100 Studiengängen ein breites Fächerspektrum. Vier Profillinien bilden mit den entsprechenden Departments die interdisziplinäre Fakultät - ein Novum in der deutschen Universitätsgeschichte.Hier werden fachliche Grenzen überschritten, neue Perspektiven, Themen und Techno-logien entwickelt. Die Profillinien sind: 1. Leben, Licht & Materie 2. Maritime Systeme3. Altern des Individuums in der Gesellschaft 4. Wissen - Kultur - Transformation.
Universität RostockLehrstuhl Konstruktionstechnik/ LeichtbauAlbert-Einstein-Str. 2
18059 Rostock, Germany
Tel.: 0175 2737944
Fax: 0381 4989172
E-Mail: [email protected]
Web: www.Leichtbau.uni-rostock.de
Halle / Stand 4/C22
Friedrich-Schiller-Universität JenaPhysikalisch-Astronomische FakultätInstitut für Materialwissenschaft undWerkstofftechnologieLöbdergraben 32
07743 Jena, Germany
Tel.: 03641 947733
Fax: 03641 947732
E-Mail: [email protected]
Web: www.matwi.uni-jena.de
Halle / Stand 4/C22
UNIVERSAL STAR GROUP LIMITED specializes in manufacturing both E-glass and C-glass fiberglass roving, chopped strands, fiberglass filament roving, chopped strand mat and combo mat, fiberglass cloth/fabric as well as electronic fiberglass yarn, car-bon fiber, Basalt fiber. Quartz fiber, High strength fiberglass, High Silica fiberglass and FRP/GRP products (pipe, tank, grating, profile, pressure vessel) with over 100 types andvarieties in total. It is currently one of the largest exporter of fiberglass reinforcementsin China. Products are being exported to clients in more than 20 countries and regions; Mainly in the USA, Japan, Germany, Russia and Brazil etc. Therefore, the company always insists on the development policy of using science as impetus, Focusing on quality to open up the market, Using internationally advanced production instruments as direct-melt furnaces, automatic winders, intelligent tempe-rature control systems.
Universal star group limited
No. 999 YangFan Rd.
Ningbo 315000, China
Tel.: +86 135 8669 7155
Fax: +86 574 8764 3436
E-Mail: [email protected]
Web: www.unistarfiberglass.com
Halle / Stand 6/B36a
Noncommercial organization Union of composites manufactures (UNCM Russia) wasestablished in 2004 by producers or reinforcing materials with the aim of protection of interests of producers of composites materials operating on the Russian markets.
At the present time the UNCM joins manufactures of continuous reinforcing materials and reinforced plastic, producers of specialized equipment, scientific organizations,trading companies.
The Union assists in problems solving and creates the favorable conditions for develop-ment of each enterprise – the Union’s member.
Union of Composites Manufacturers (UNCM)
PObox 49
Moscow 117292, Russia
Tel.: 007 495 984 76 74
Fax: 007 495 984 76 74
E-Mail: [email protected]
Web: www.uncm.ru
Halle / Stand 4/A35, 6/C30 Media Pavilion
159
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsVab - Vel
V
VELOX – Specialities in Motion across Europe
VELOX is a European leader in the supply and marketing of raw material specialities for the plastics, composites, additives, paints and coatings industries. Based in Hamburg, VELOX offers market know-how and full-service solutions right across Europe.
Our composite division has the capabilities and geographical footprint to provideexpert sales and applications support in sourcing and testing products and identifying new opportunities.
Our markets include transportation, building and construction, marine, tanks and ves-sels, chemical protection, sanitary ware applications, wind energy, sports and leisure. Our composite portfolio covers over 1000 products, from thermoset matrix (polyester,vinyl-ester, epoxy, phenolic), glass and carbon reinforcements, organic peroxides, corematerials, specific fillers and additives, solvents, ancillaries and equipment.
For additional Information, please visit: www.velox.com
VELOX GmbH
Brandstwiete 1
20457 Hamburg, Germany
Tel.: 0049 40 369 688 0
Fax: 0049 40 369 688 88
E-Mail: [email protected]
Web: www.velox.com
Halle / Stand 4/B18
Das Forum Composite Technology im VDMA ist zentraler Kontaktpunkt der Branche. Esist Schnittstelle zu allen Unternehmen, Verbänden und Instituten, die am Herstellungs- und Verarbeitungsprozess bzw. an der Anwendung von Composites beteiligt sind. Das Forum bietet den angeschlossenen Mitgliedsfirmen eine Plattform für Technolo-gie-übergreifenden Austausch. Inhaltlich werden die Themen Märkte und Kunden, Her-stellernachweis, Prozessverständnis, Forschung, Messepolitik und Öffentlichkeitsarbeit abgebildet.
VDMA e.V.Forum Composite TechnologyLyoner Str.18
60528 Frankfurt, Germany
Tel.: 069 66031835
Fax: 069 66032835
E-Mail: [email protected]
Web: www.ct.vdma.org
Halle / Stand 6/B08
Der VDID (Verband Deutscher Industrie Designer) stellt Designbüros vor, die unter An-wendung neuer Materialien und Composite Werkstoffe bereits Projekte realisiert oder in Planung haben. Sie bieten Expertenwissen sowohl bei der Visualisierung als auch der konstruktiven Umsetzung von innovativen Produkten. Es werden eine Anzahl von Designexponaten ausgestellt.
Weiterhin werden Muster und Anwendungsbeispiele der Stuttgarter Agentur raum-PROBE zu sehen sein, die über eine umfangreiche Material-Ausstellung und eine On-line-Datenbank verfügt und bei Bedarf auch als Scout für Materialien mit bestimmtenEigenschaften tätig werden kann.
Am Di 17.09. wird der VDID zusammen mit der Wirtschaftsförderung Region Stuttgart GmbH (WRS) Vorträge zum Thema Materialtrends in der Region Stuttgart Lounge im Eingangsbereich Ost halten. Die Referenten sind Designer und anerkannte Materialex-perten.
VDID - Verband DeutscherIndustrie Designer e.V.Markgrafenstr. 15
10969 Berlin, Germany
Tel.: 030 74 07 85 56
Fax: 030 74 07 85 59
E-Mail: [email protected]
Web: www.vdid.de
Halle / Stand 6/F50
Born in Turin Italy in 1957, Vaber Industriale Spa produces adhesives, sealants, butyl tape, compounds, sound damping coatings and special products for Automotive indus-tries, Transportation, Marine, Special assemblies and Composite. In addition to chemicals products, in 2009 Vaber Industriale developed a specific range of products for Composite and, with its own co-design capabilities, formulated new products and systems to reduce production costs. Certified ISO 9001 by Certiquality since 18th April 2000, Vaber Industriale Spa is alsodistributor of Plexus Structural Adhesives for Italy since 1999 and, starting from 2010, has entered into a contract for the distribution of Aluminium Foam Products manufactured by Foamtech.
Vaber Industriale SPA
Strada San Mauro, 203
10156 Torino, Italy
Tel.: 0039 011 273 4432
Fax: 0039 011 223 7772
E-Mail: [email protected]
Web: www.vaber.it
Halle / Stand 6/C03
160
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsVer - Web
W
Weber is a world-class mold maker located in Midland, Ontario Canada. Weber was founded in 1962 and supplies molds for many processes in the Aerospace, Automotive, and Home/Building markets. With our 5-axis CNC machining centers, on-site Enginee-ring, Pattern shop and Hand Finishing; we offer complete turn-key mold solutions,custom designed. We build molds in a variety of materials; including Invar36, P20 mold steels, Alu-minum, and Nickel.Over the last 16 years Weber has developed a unique capability for making solid sha-pes in high precision, solid nickel shells using our proprietary Nickel Vapour Deposition(NVD) technology. These nickel shells are used in a variety of Aerospace, Automotive, and Home/Building applications. Weber specializes in high quality, precision, rapid heating and cooling mold solutions for composite and thermoset applications. Weber has ISO 9001:2008 and Canadian Controlled Goods Program registry. A Boeing and Bell Helicopter approved tool supplier.
Weber Manufacturing Technologies Inc.
16566 Hwy 12
Midland ON L4R 4L1, Canada
Tel.: +1 705 526 7896
Fax: +1 705 526 3818
E-Mail: [email protected]
Web: www.webermfg.ca
Halle / Stand 6/A09
VSE Volumentechnik GmbH
Hönnestraße 49
58809 Neuenrade, Germany
Tel.: +49 23 94 6 16 30
Fax: +49 23 94 6 16 33
E-Mail: [email protected]
Web: www.vse-flow.com
Halle / Stand 6/B12
VOSSCHEMIE GmbH
Esinger Steinweg 50
25436 Uetersen, Germany
Tel.: 04122 717 0
Fax: 04122 717 158
E-Mail: [email protected]
Web: www.vc-24.de
Halle / Stand 4/C28
Die Märkte, mit denen sich die Angebote aus dem verlag moderne industrie beschäf-tigen, sind in erster Linie die verarbeitende Industrie, das produzierende Gewerbe, In-dustrie, Handel, Dienstleistung, die Automobilindustrie, die Metall- und die Kunststoff verarbeitende Industrie, der Maschinen- und Fahrzeugbau sowie niedergelassene Ärzte. Je nach Ausrichtung der einzelnen Titel stehen die unterschiedlichen Aufgabenbereichein den verschiedenen Industriezweigen im Fokus der Berichterstattung.
verlag moderne industrie GmbH
Justus-von-Liebig-Str. 1
86899 Landsberg, Germany
Tel.: 08191-125 0
Fax: 08191-125 526
E-Mail: [email protected]
Web: www.mi-verlag.de
Halle / Stand 6/C30 Media Pavilion
V
161
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsWei - Wer
W
„WERKSTOFFE in der Fertigung“ ist die umfassende und branchenübergreifende Fach-zeitschrift für die technischen Führungskräfte in den Produktionsbetrieben. Die rasantetechnische Entwicklung verlangt von den Entscheidern in den Produktionsbetrieben auf dem Laufenden zu sein. Das ist das ideale Umfeld für Ihr Angebot. „WERKSTOFFE in der Fertigung“ ist der richtige Marktplatz für Sie.
“Werkstoffe der Fertigung“HW-VerlagSonnenblumenring 35
86415 Mering, Germany
Tel.: 08233-32761
Fax: 08233-32762
E-Mail: [email protected]
Web: www.werkstoffzeitschrift.de
Halle / Stand 6/C30 Media Pavilion
WELA Handelsgesellschaft mbH
Tempelhoferweg 13
21502 Geesthacht, Germany
Tel.: 04152 88 24 0
Fax: 04152 83 50 70
E-Mail: [email protected]
Web: www.wela-handelsgesellschaft.de
Halle / Stand 4/A28
Seit Jahrzehnten setzt Weiss erfolgreich am Markt Maßstäbe für Qualität und exzel-lente Serviceleistungen. Mit unserem umfangreichen Produktprogramm an Klebstoffen und Sandwichelementen sind wir in der Lage, eine Vielzahl an Anwendungsfeldern abzudecken.
Gerne realisieren wir aber auch Lösungen, die 100% auf Ihre Bedürfnisse zugeschnit-ten sind. Vertrauen Sie unserer langjährigen Erfahrung und lassen Sie sich von den professionellen und leistungsstarken Produkten „made by Weiss“ überzeugen.
Weiss Chemie + Technik GmbH & Co. KG
Hansastraße 2
35708 Haiger, Germany
Tel.: 02773 815 0
Fax: 02773 815 100
E-Mail: [email protected]
Web: www.weiss-chemie.de
Halle / Stand 4/A16
Als Entwicklungsdienstleister mit langjähriger Erfahrung in Faserverbund-Verarbeitung sind wir Ihr Ansprechpartner für Leichtbau Projekte aller Art. Auf Basis eines eigens entwickelten, innovativen Formenbauverfahrens haben wir unshierbei insbesondere auf die wirtschaftliche Entwicklung und Fertigung von Einzelbau-teilen, Kleinserien und Prototypen aus Faserverbundwerkstoffen spezialisiert.WeightWorks Engineering
F. DietzeKaltbrunnerstraße 24
78476 Allensbach, Germany
Tel.: +49 157 81950481
E-Mail: [email protected]
Web: www.weightworks.de
Halle / Stand 6/G23
162
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsWic - Wis
W
Die Baureihen WiTEC und GAMMA sind die Lösungen im Bereich der CNC gesteuerte Fräsmaschinen für verschiedenste Anwendungsgebiete. Ob Plattenbearbeitung in der Werbetechnik, Präzisionsarbeiten in der Luft- und Raumfahrttechnik oder komplexe5-Achs-Bearbeitung im Modell- und Formenbau – den Ausstattungsmöglichkeiten und Abmessungen dieser Baureihen sind keine Grenzen gesetzt.Es gibt zahlreiche Ausstattungsoptionen, die individuell den jeweiligen Anforderungen angepasst werdenkönnen.Eine Option ist die überragende Neuerung der letzten Jahre, das patentierte W.hold&press System zum sicheren Spannen von kleinsten Teilen.Der Tornadoabsau-gung ist ein ringförmiges Niederhaltersystem angeschlossen, das in einem engen Kreis um den Fräser wirkt und das zu bearbeitende Werkstück mit hohem Spanndruck auf die Vakuumfläche drückt.
Wissner Gesellschaft für Maschinenbau mbH
August-Spindler-Str. 14
37079 Göttingen, Germany
Tel.: +49551 505080
Fax: +49551 5050830
E-Mail: [email protected]
Web: www.wissner-gmbh.de
Halle / Stand 6/B43
DER Hersteller für CFK- & GFK-Teile.
Wir sind Ihr Partner in Sachen Carbon- und Kunststoffverarbeitung! Wir bieten Ihnen kompetente und umfassende Lösungen rund um die Konstruktion und Herstellung von GFK- CFK-Teilen. Unser Kunde ist unser Partner:Durch die hohe Qualität unserer Produkte soll der Kunde ein Maximum an Erfolg und Effizienz erreichen; zusammen arbeiten wir stetig an einer technischen und wirt-schaftlichen Optimierung unserer Produkte – denn: Ihr Erfolg ist auch unser Erfolg!
Unser Qualitätsmerkmal: DIN EN 9100:2009 ISO 9001:2008
Kunststoffverarbeitung Wimmer GmbH
Schmidhamerstr. 24
83278 Traunstein, Germany
Tel.: 0861 98942 0
Fax: 0861 98942 18
E-Mail: [email protected]
Web: www.carbontechnik.com
Halle / Stand 6/D04
MonoPan®, ein Produkt der WIHAG Composites GmbH & Co.KG aus Königsee-Rotten-bach/Thüringen, gehört zu den leichtesten und zugleich robustesten Sandwichpanee-len, die in einem industriellen Fertigungsverfahren hergestellt werden. Die hohe Wider-standsfähigkeit dieses innovativen Werkstoffs aus Polypropylen wird zum Einen durchdie Wabenstruktur im Kern erzielt, zum Anderen sorgen hochstabile, glasfaserverstärk-te Deckschichten an beiden Außenseiten für eine hohe Steifigkeit und eine schlagfeste Oberfläche des Paneels. Einzigartig an MonoPan® ist, dass Wabenkern und Deckschich-ten durch Wärmezufuhr miteinander verschweißt und auf diese Weise untrennbar miteinander verbunden werden. Eine Delamination ist dadurch ausgeschlossen.
MonoPan® lässt sich sehr einfach verarbeiten und ist vielseitig einsetzbar. Aufgrundder beeindruckenden Vorteile von MonoPan® setzen heute Kunden aus verschiedensten Branchen dieses Paneel erfolgreich ein und sichern sich entscheidende Wettbewerbs-vorteile.
Wihag Composites GmbH & Co. KG
Industrie- und Gewerbegebiet 10
07426 Königsee-Rottenbach, Germany
Tel.: 036739 315
Fax: 036739 316 66
E-Mail: [email protected]
Web: www.wihag-composites.de
Halle / Stand 4/F07
WICKERT ist Hersteller von hydraulischen Pressen und vollautomatischen Pressensyste-men für Composite Materialien.Das Produktportfolio der WICKERT Anlagenbaureihe deckt Kompressionspressen für RTM, HP-RTM, Nasspressen, Pre-Preg und Thermoformen sowie alle artverwandtenHerstellungsprozesse ab.Das WICKERT Baukastensystem umfasst Pressen mit einer Zuhaltekraft von 70.000 kN für eine Vielzahl von Produktgrößen und Produktvariationen.
WICKERT is a manufacturer of hydraulic presses any fully automatic press systems forcomposite materials. The product range of WICKERT consists press systems for RTM, HP-RTM, Wet-Lay up, Pre-Preg and Thermoforming as well as all related processes. The WICKERT modular system includes presses with a clamping force from 70.000 kN for a variety of product dimensions any product types.
WICKERT Maschinenbau GmbH
Wollmesheimer Höhe 2
76829 Landau/Pfalz, Germany
Tel.: 06341 9343 0
Fax: 06341 9343 30
E-Mail: [email protected]
Web: www.wickert-presstech.de
Halle / Stand 6/E12
163
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsWol - Zck
Z
Im Bereich des Zuschnittcenter sind wir auf den Zuschnitt verschiedenster Materialien ( z.B. Kohlefaser-, Aramid oder Hybridgewebe, sowohl Trockenfaser als auch Prepreg, Alu- u. Kevlarwaben, PVC laminierte Gewebe, Bitumenpappe, Technische Textilien, Akustik- Schaumstoff, Verbundschaumstoff, Dichtungen, u.v.m.).
Im Bereich Faserverbundtechnik arbeiten wir u.a. für Kunden im Bereich Autotuning, Messmittel (z.B. Akustikmessmittel), Automobilindustrie, Medizintechnik. Die Ferti-gungsbandbreite reicht dabei vom Kohlefaser-/Glasfaserwerkzeug über Prototypenbaubis zum fertigen Bauteil für sowohl Einzelteile als auch Kleinserien. Durch externe Partner können wir auch Fräs-u. Lackierarbeiten anbieten.
Zertifizierungen: QuB u. ISO9001:2008
ZCK Zuschnittcenter u. Faserverbund-technik Gmbh & Co. KGLeitenacker 1
95326 Kulmbach, Germany
Tel.: 0178 3383935
Fax: 09221 8780969
E-Mail: [email protected]
Web: www.zck-faserverbund.de
Halle / Stand 6/B04
We are pleased to present you with a production profile of our firm. We construct and manufacture articles made of Glass Reinforced Plastic - GRP, which are intended for corrosive and aggressive environment. Trokotex Ltd. was established in 1987 as aproducer of modern, lightweight fibreglass equipment. The range of produced assortment: store tanks (also dihedral tanks with spare tanks),shape: cylindrical, rectangular, setting: vertical, horizontal, application:under-ground, over-ground, bridging grates, steps of stairs, covering the metal and concrete surfaces with chemically resistant coat. All customer’s requirements are considered during manufacturing. There is a certifiedfactory laboratory in our company. We have authorisation of Polish Office of Technical Inspection for production, modernisation and repair of plastic tanks. The tanks and bridging grates are attested for contact with drinking water by Polish National Institu-te of Hygiene.
Zaklady Laminatów Poliestrowych TROKOTEX Sp. z.o.o.Ul. Wapienna 10
Torun 87-10, Poland
Tel.: +48 56 639 07 51
Fax: +48 56 639 07 58
E-Mail: [email protected]
Halle / Stand 4/F18
Die Fa. Piekenbrink ist ein kleines mittelständisches Familienunternehmen mit mo-mentan 73 Arbeitnehmern.Es werden Faserverbund-Strukturteile sowie Werkzeuge undFertigungsmittel mit allen verfügbaren Verfahren und Materialien hergestellt.Unsere Kunden haben den Vorteil,alles aus einer Hand zu bekommen.Dies wären CAD/CAM,-Modellbau,Werkzeugbau,Oberflächenvergütung,Prototypen und Funktionsmodelle,von Einzelteilen über Vorserie bis hin zur Serien-Produktion von 1000 Stück oder mehr.Ebenso in Verbindung mit Metall-Komponenten wie gedrückte,gefräste oder geschweißte Bautei-le,ggf.auch mit galvanisch bearbeiteter oder lackierter Oberfläche.Für unsere Kundenaus der Luftfahrt-und Verteidigungsindustrie liefern wir fertig montierte und geprüfte Einheiten aus Faserverbundwerkstoffen und Metall.Unsere Produktion stützt sich auf eine breite Palette von Geräten wie Prepreg-Laminiermaschine,Autoklav bis 400 °C, NC-Cutter,CAD/CAM und verfügen somit über alle notwendigen Geräte im Haus.
W. Piekenbrink GmbH
Vorholzstraße 40
88471 Laupheim, Germany
Tel.: 07392 93866 0
Fax: 07392 93866 99
E-Mail: [email protected]
Web: www.piekenbrink.de
Halle / Stand 4/D25
Epoxy, Polyester, Dosierverhältnis, Zykluszeiten, Leichtgewicht, RTM, Wandstärken,erstklassige Oberfläche, saubere Verfahren, Produktionssicherheit – beschäftigen Siesich mit diesen Themen? Wir auch! Seit über 50 Jahren sind wir in der Branche aktiv. Seit über 30 Jahren bauen wir Ma-schinen für diese Anwendungen und liefern diese in über 30 Länder weltweit.Die Faserverbundkunststoffbauteile sind nicht mehr wegzudenken und es kommen immer mehr Einsatzmöglichkeiten dazu. Wir begleiten Sie gerne bei der Umsetzung Ihrer Ideen in Ihrer Produktion – bei der Lösungsfindung, den Tests, der Einführung und danach. Unser Spezialgebiet ist Kundenzufriedenheit. Fordern Sie uns: hier auf dem Messestand Nr. B 32 in Halle 4 oder über +49 7152 999200 und www.wolfangel.com Sie finden uns mit täglichen live Vorführungen auf der Product Demonstation Area!
Wolfangel GmbH
Röntgenstr. 31
71254 Ditzingen-Heimerdingen, Germany
Tel.: 07152 999200
Fax: 07152 58195
E-Mail: [email protected]
Web: www.wolfangel.com
Halle / Stand 4/B32
W
164
Alphabetisches Ausstellerverzeichnis
Alphabetical list of exhibitorsZhe - Zol
Z
Zoltek Zrt.
Varga József tér 1.
Nyergesujfalu 2537, Hungary
Tel.: 0036 20 4112545
Fax: 0036 33 536 020
E-Mail: [email protected]
Web: www.zoltek.com
Halle / Stand 4/C15
Zhejiang HengdianGBF Basalt Fibre Co. Ltd3/f, world trade office 122 Shuguang Road
Hangzhou 310007, China
Tel.: +86 571 87635787
Fax: +86 571 87990555
E-Mail: [email protected]
Web: www.besaltfiber-gbf.com
Halle / Stand 6/B36b
Visions become reality.
Warengruppen mit Ausstellerfirmen
Product groups with exhibitors
166
Nomenklatur
01000000 - Rohmaterialien
01010000 - Chemische Grundprodukte
01010100 - Harze
01010101 - Epoxid
01010102 - Polyester
01010103 - Vinylester
01010104 - Phenolharz
01010105 - PUR
01010106 - Silikon
01010107 - Klebeharze
01010108 - Sonstige Harze
01010200 - Härter
01010300 - Gelcoats
01010400 - Sonstige chemische Grundprodukte
01020000 - Füllstoffe
01020100 - Fasern
01020200 - Pulver
01020300 - Kugeln
01020400 - Sonstige Füllstoffe
01030000 - Additive
01030100 - Verarbeitungshilfsmittel
01030200 - Eigenschaftsmodifier
01030300 - Beschleuniger
01030400 - Farbstoffe / Pigmente
01030500 - Nanopartikel
01030600 - Farbpasten
01030700 - Sonstige Additive
01040000 - Thermoplaste
01050000 - Kernmaterialien
01050100 - Schaumstrukturen
01050101 - Thermoplaste
01050102 - Duroplaste
01050200 - Wabenstrukturen
01050300 - Natürliche Werkstoffe
01050400 - laminierbare oder imprägnierbare Kernwerkstoffe
01050500 - Sonstige Kernmaterialien
01060000 - Sonstige Rohmaterialien
02000000 - Fasern, Faserprodukte, Halb- und Zwischenprodukte
02010000 - Verstärkungen / Fasern
02010100 - Glasfasern
02010200 - Kohlenstofffasern
02010201 - Gewebte Schläuche / Bänder
02010202 - Geflochtene Schläuche / Litzen
02010300 - Aramidfasern
02010400 - Naturfasern
02010500 - Metallfasern
02010600 - Sonstige Verstärkungen / Fasern
02010700 - Basaltfasern
02020000 - Schnittfasern, Langfasern
02030000 - Rovings
02040000 - Faserhalbzeuge flächig
02040100 - Gewebe
02040200 - Gelege
02040300 - Vlies
02040400 - Sonstige Faserhalbzeuge flächig
02050000 - Faserhalbzeuge rund / geschlossen
02050100 - Geflechte
02050200 - Gestricke
02050300 - Glasfasern - Gewebte Schläuche / Bänder
02050400 - Glasfasern - Geflochtene Schläuche / Litzen
02050500 - Sonstige Faserhalbzeuge rund / geschlossen
02060000 - Prepregs
02060100 - Duroplaste
02060200 - Thermoplaste
02070000 - Pressmassen
02070100 - Duroplaste
02070101 - SMC
02070102 - BMC
02070103 - Sonstige Duroplaste
02070200 - Thermoplaste
02070201 - GMT
02070202 - LFT
02070203 - Sonstige Thermoplaste
02080000 - Sonstige Fasern, Faserprodukte, Halb- und Zwischenprodukte
03000000 - Verarbeiter
03010000 - Autoklavverfahren
03020000 - geschlossene Flüssigimprägnierverfahren
03020100 - RTM
03020200 - Harzinfusion
03020300 - Sonstige geschlossene Flüssigimprägnierverfahren
03030000 - offene Flüssigimprägnierverfahren
03030100 - Handlaminieren
03030200 - Faserspritzen
03030300 - Sonstige offene Flüssigimprägnierverfahren
03040000 - Umformtechnik
03050000 - Tapelegen
03060000 - Faserwickeln
03070000 - Pultrusion
03080000 - Pressen
03080100 - Nasspressen
03080200 - Fließpressen
03080300 - Kaltpressen
03080400 - Heißpressen
03090000 - Spritzgießen
03100000 - RIM
03110000 - Recycling
03120000 - Sonstige Verarbeiter
04000000 - Weiterverarbeiter / Veredelung
04010000 - Oberflächenbehandlung
04010100 - Reinigung
04010200 - Lackierung
04010300 - Modifikation
04010400 - Sonstige Oberflächenbehandlung
04020000 - Fügen
04020100 - Formschlüssige Verbindung
04020200 - Kraftschlüssige Verbindung
04020300 - Adhäsive Verbindung
04020400 - Fügen Sonstiges
04030000 - Trennen / Entgraten
04040000 - Mechanische Bearbeitung
04050000 - Sonstige Weiterverarbeiter / Veredelung
05000000 - Maschinen, Anlagen, Equipment, Verbrauchsmaterialien
05010000 - Maschinen zur Faserherstellung und –aufbereitung
05010100 - Maschinen zur Faserherstellung
05010200 - Faserschneidtechnik
05010300 - Sonstige Maschinen zur Faserherstellung und –aufbereitung
05020000 - Maschinen zur Herstellung textiler Strukturen
05020100 - Maschinen zur Garnherstellung
05020200 - Maschinen zur Vliesstoffherstellung
05020300 - Filament-Winding-Maschinen
05020400 - Flechtmaschinen
05020500 - Fibre-Placement-Anlagen
05020600 - Tapelaying-Maschinen
05020700 - Kettenwirkmaschinen
05020800 - Webmaschinen
05020900 - Beschichtungsmaschinen
05021000 - Schneidmaschinen
05021100 - Sonstige Maschinen zur Herstellung textiler Strukturen
05030000 - Maschinen zur Konfektion von Verstärkungstextilien
05030100 - Maschinen für die Zuschnittvorbereitung
05030200 - Maschinen für den Zuschnitt
05030300 - Fügetechnik
05030400 - Sonstige Maschinen zur Konfektion von Verstärkungstextilien
05040000 - Maschinen zur Herstellung von Verbundstoffen
05040100 - Extruder
05040200 - Planetwalzenextruder
05040300 - Compounder
05040400 - Schäumanlagen
05040500 - SMC (Sheet Molding Compound)
05040600 - BMC (Bulk Moulding Compound)
05040700 - GMT (Glasmattenverstärkte Thermoplaste)
05040800 - LFT (Langfaserverstärkte Thermoplaste)
05040900 - Folienvakuuminjektion
05041000 - Druckinjektion
05041100 - Spaltimprägnierverfahren
05041200 - Spritzpressen
05041300 - RTM (Resin Transfer Moulding)
05041400 - Hochdruck-RTM (Resin Transfer Moulding)
05041500 - RRIM (Reinforced Reaction Injection Moulding)
167
Nomenklatur
05041600 - S-RIM (Structural Reaction Injection Moulding)
05041700 - Spritzgießen
05041701 - BMC (Bulk Moulding Compound)
05041702 - Duroplast BMC (Bulk Moulding Compound)
05041703 - Kurzglasfaser verstärkt (SFG-IM)
05041704 - Langglasfaser verstärkt (LFG-IMM)
05041705 - Endlosfaser verstärkt (D-LFT-IM)
05041706 - Textilverstärkt
05041800 - Schleudergussverfahren
05041900 - Pultrusionsverfahren
05042000 - Laminierverfahren
05042100 - Formpressen
05042200 - Kontinuierliche Pressen
05042300 - Thermoformmaschinen (Organobleche)
05042400 - Anlagen für Rollformen
05042500 - Walzen
05042600 - Autoklaven
05042700 - Sonstige Maschinen zur Herstellung von Verbundstoffen
05050000 - Maschinen zur Materialvorbereitung
05050100 - Materialzuführ- und -dosiersysteme
05050200 - Mischer
05050300 - Trockner
05050400 - Sonstige Maschinen zur Materialvorbereitung
05060000 - Maschinen zum Bearbeiten von Verbundstoffen
05060100 - Schneid- und Spaltmaschinen
05060200 - Maschinen zur Oberflächenbearbeitung
05060300 - Sonstige Maschinen zum Bearbeiten von Verbundstoffen
05070000 - Werkzeug- / Formenbau
05070100 - geschlossene Imprägnierformen
05070200 - einteilige Werkzeugformen
05070300 - Faserwickelkerne
05070400 - Pultrusionswerkzeuge
05070500 - Presswerkzeuge
05070501 - Hochdruck
05070502 - Niederdruck
05070600 - Composite Werkzeuge
05070700 - Metall-Werkzeuge
05070800 - Diamant-Werkzeuge
05070900 - Zerspanungs-Werkzeuge
05071000 - Sonstiges Werkzeug- / Formenbau
05080000 - Handhabungstechnik
05080100 - Roboter
05080200 - andere Handhabungseinrichtungen
05080300 - Einrichtungen zum Verketten und Transportieren
05090000 - Ablufttechnik
05090100 - Abluftreinigung VOC
05090200 - Absauganlagen / Staubsaugertechnik
05100000 - Mess- und Prüftechnik
05100100 - Zerstörungsfreies Prüfen
05100200 - Messgeräte Oberflächenstruktur
05100300 - Messgeräte Maßhaltigkeit
05100400 - Messgeräte Werkstoffeigenschaften
05100401 - mechanisch
05100402 - thermisch
05100403 - chemisch
05100404 - Sonstige Messgeräte Werkstoffeigenschaften
05100500 - Bildverarbeitung und Optosensorik
05100600 - Sonstige Mess- und Prüftechnik
05110000 - Maschinen zum Recycling
05120000 - Verbrauchsmaterialien
05120100 - Vakuumsack
05120200 - Trennmittel
05120300 - Sicherheitsartikel
05120400 - Klebstoffe
05120500 - Sonstige Verbrauchsmaterialien
06000000 - Hersteller von Produkten
06010000 - Platten
06020000 - Sandwichplatten
06030000 - Rohre
06040000 - Profile
06050000 - Behälter
06060000 - Formteile
06060100 - Prototypen
06060200 - Serienherstellung
06070000 - Sonstige Hersteller von Produkten
06080000 - Kontinuierliche Plattenfertigung
07000000 - Verbundwerkstoffprodukte
07010000 - Glasfaserverstärkter Kunststoff (GFK)
07020000 - Kohlenstofffaserverstärkter Kunststoff (CFK)
07030000 - Aramidfaserverstärkter Kunststoff (AFK)
07040000 - Naturfaserverstärkter Kunststoff (NFK)
07050000 - Metallfaser-Polymer-Verbund
07060000 - Metallmatrix-Verbund
07070000 - Keramikmatrix-Verbund
07080000 - Metall-Keramik-Verbund
07090000 - Kohlenstofffaserverstärkter Kohlenstoff (CFC)
07100000 - Faserverstärkter Beton
07110000 - Sonstige Verbundwerkstoffprodukte
08000000 - Bauteile / Produkte für Anwendungsindustrien
08010000 - Automobil (Pkw und Lkw)
08020000 - Bau / Konstruktion
08030000 - Bauwesen / Infrastruktur
08040000 - Eisenbahn / Busse / Massenverkehr
08050000 - Elektrik / Elektronik
08060000 - Flugzeuge / Luft- und Raumfahrt
08070000 - Industrielles / Allgemeines Ingenieurwesen
08080000 - Konsumentenprodukte
08090000 - Korrosionsschutz / chemikalienbeständige Ausrüstung
08100000 - Landwirtschaft
08110000 - Marine / Schiffbau
08120000 - Medizin
08130000 - Offshore
08140000 - Sport, Freizeit
08150000 - Verteidigung
08160000 - Wasserkontrolle / Abwasser
08170000 - Windenergie
08180000 - Sonstige Bauteile / Produkte für Anwendungsindustrien
09000000 - Services und Dienstleistungen
09010000 - Dienstleistungen
09010100 - Distributoren
09010200 - Berater
09010300 - Forschungsinstitute / -organisationen
09010400 - Bildungs- / Trainingsinstitutionen
09010500 - Unabhängige Prüfanstalten
09010600 - Publikationen / Verlage
09010700 - Recyclingdienste
09010800 - Normenorganisationen
09010900 - Fachverbände
09011000 - CAD / CAM-Dienstleister
09011100 - Qualitätssicherung
09011200 - Prototypenbau
09011300 - Simulation / Auslegung
09011400 - Brandschutzssysteme
09011500 - Sonstige Dienstleistungen
09020000 - Software
09020100 - Design
09020200 - Kalkulation
09020300 - Materialdatenbanken
09020400 - Maschinensteuerung
09020500 - Simulation
09020501 - FE-Simulation
09020502 - Prozesssimulation
10000000 - Sonstiges
10010000 - Sonstiges
168
Nomenclature
01000000 - Raw Materials
01010000 - Chemicals
01010100 - Resins
01010101 - Epoxy
01010102 - Polyester
01010103 - Vinyl Ester
01010104 - Phenolic
01010105 - PUR
01010106 - Silicone
01010107 - Adhesive resins
01010108 - Other Resins
01010200 - Hardeners
01010300 - Gel Coats
01010400 - Other Chemicals
01020000 - Fillers
01020100 - (Short) fibres
01020200 - Powder
01020300 - Pellets
01020400 - Other fillers
01030000 - Additives
01030100 - Processing Aids
01030200 - Modifiers
01030300 - Accelerators
01030400 - Dyes / Pigments
01030500 - Nanoparticles
01030600 - Dye Pastes
01030700 - Other Additives
01040000 - Thermoplastics
01050000 - Core Materials
01050100 - Foam structure
01050101 - Thermoplastic Resin
01050102 - Thermosetting Resin
01050200 - Honeycomb Structures
01050300 - Natural Materials
01050400 - Laminatable or Impregnatable Core Materials
01050500 - Other Core Materials
01060000 - Other Raw Materials
02000000 - Fibres, Fibre Products, Intermediate and Semi-finished
Products
02010000 - Reinforcements / Fibres
02010100 - Glass Fibres
02010200 - Carbon Fibres
02010201 - Woven Tubes / Tapes
02010202 - Braided Tubes / Wires
02010300 - Aramid Fibres
02010400 - Natural Fibres
02010500 - Metal Fibres
02010600 - Other Reinforcements / Fibres
02010700 - Basalt Fibre
02020000 - Chopped Fibres, Long Fibres
02030000 - Rovings
02040000 - Textiles (planar)
02040100 - Fabrics
02040200 - Non-crimp Fabrics
02040300 - Non-wovens
02040400 - Other Textiles (planar)
02050000 - Textiles (tubular)
02050100 - Meshwork
02050200 - Knitted Fabrics
02050300 - Glass Fibres - Woven Tubes / Tapes
02050400 - Glass Fibres - Braided Tubes / Wires
02050500 - Other Textiles (tubular)
02060000 - Prepregs
02060100 - Thermoset
02060200 - Thermoplastic
02070000 - Moulding Compounds
02070100 - Thermoset
02070101 - SMC
02070102 - BMC
02070103 - Other Thermosets
02070200 - Thermoplastic
02070201 - GMT
02070202 - LFT
02070203 - Other Thermoplastics
02080000 - Other Fibres, Fibre Products, Intermediate and Semi-Finished
Products
03000000 - Manufacturers using
03010000 - Autoclave
03020000 - Closed Mould Processes
03020100 - RTM
03020200 - Resin Infusion
03020300 - Other Closed Mould Processes
03030000 - Open Mould Processes
03030100 - Hand Lay-Up
03030200 - Spray-Up
03030300 - Other Open Mould Processes
03040000 - Forming
03050000 - Tape Laying
03060000 - Filament Winding
03070000 - Pultrusion
03080000 - Press Processes
03080100 - Wet Moulding
03080200 - Compression Moulding
03080300 - Cold Moulding
03080400 - Hot Moulding
03090000 - Injection Moulding
03100000 - RIM
03110000 - Recycling
03120000 - Other Processors
04000000 - Further Processors / Refiners
04010000 - Surface Treatment
04010100 - Cleaning
04010200 - Painting
04010300 - Modification
04010400 - Other Surface Treatment
04020000 - Joining
04020100 - Positive Joints
04020200 - Non-positive Joints
04020300 - Adhesive Joining
04020400 - Other
04030000 - Cutting / Trimming
04040000 - Machanical Processing
04050000 - Other Processors / Refiners
05000000 - Machines, Equipment, Consumable Materials
05010000 - Machinery for Fibre Production and Preparation
05010100 - Machinery for Fibre Production
05010200 - Fibre Cutting
05010300 - Other Machinery for Fibre Production and Preparation
05020000 - Machinery for Production of Textile Structures
05020100 - Machinery for Yarn Production
05020200 - Machinery for Non-wovens Production
05020300 - Filament-winding Machines
05020400 - Braiding Machines
05020500 - Fibre-placement Equipment
05020600 - Tapelaying Machines
05020700 - Warp Knitting Machines
05020800 - Looms
05020900 - Coating machines
05021000 - Cutting machines
05021100 - Other Machinery for Production of Textile Structures
05030000 - Machinery for Make-up of Reinforcing Textiles
05030100 - Machines for Cutting Preparation
05030200 - Machines for cutting
05030300 - Joining Technology
05030400 - Other Machinery for Make-up of Reinforcing Textiles
05040000 - Machines for Manufacture of Composites
05040100 - Extruders
05040200 - Planetary Roller Extruders
05040300 - Compounders
05040400 - Foam Systems
05040500 - SMC (Sheet Moulding Compounds)
05040600 - BMC (Bulk Moulding thermoplastics)
05040700 - GMT (glass mat reinforced thermoplastics)
05040800 - LFT (long-fibre reinforced thermoplastics)
05040900 - Film Vacuum Injection
05041000 - High-Pressure Injection
05041100 - Gap Impregnation
05041200 - Transfer Moulding
05041300 - RTM (Resin Transfer Moulding)
05041400 - High-pressure RTM (Resin Transfer Moulding)
05041500 - RRIM (Reinforced Reaction Injection Moulding)
169
Nomenclature
05041600 - S-RIM (Structural Reaction Injection Moulding)
05041700 - Injection Moulding
05041701 - BMC (Bulk Moulding Compounds)
05041702 - Thermosetting BMC (Bulk Moulding Compounds)
05041703 - Short Glass Fibre Reinforced (SGF-IM)
05041704 - Long Glass Fibre Reinforced (LGF-IMM)
05041705 - Continuous Fibre Reinforced (D-LFT-IM)
05041706 - Textile Reinforced
05041800 - Centrifugal Casting Techniques
05041900 - Pultrusion Techniques
05042000 - Lamination Techniques
05042100 - Compression Moulding
05042200 - Continuous Moulding
05042300 - Thermoform Machines (Organic Sheets)
05042400 - Roll-forming Machines
05042500 - Rolling
05042600 - Autoclaves
05042700 - Other Machinery for Manufacture of Composites
05050000 - Machines for Material Preparation
05050100 - Material Feed and Metering Systems
05050200 - Mixers
05050300 - Driers
05050400 - Other Machines for Material Preparation
05060000 - Machines for Processing Composites
05060100 - Cutting and Splitting Machines
05060200 - Machines for Surface Treatment
05060300 - Other Machines for Processing Composites
05070000 - Tool and Mould Making
05070100 - Closed Impregnation Moulds
05070200 - One-piece Tool Moulds
05070300 - Mandrels
05070400 - Pultrusion Tools
05070500 - Extrusion Dies
05070501 - High pressure
05070502 - Low pressure
05070600 - Composite Tools
05070700 - Metal Tools
05070800 - Diamond Tools
05070900 - Machining Tools
05071000 - Other Tool and Mould Making
05080000 - Handling
05080100 - Robots
05080200 - Other Handling Equipment
05080300 - Linking and Transporting Devices
05090000 - Exhaust Air Systems
05090100 - Exhaust Air Purification VOC
05090200 - Exhaust Air Equipment / Vacuum Cleaning Systems
05100000 - Measuring and Testing Technology
05100100 - Non-destructive Testing
05100200 - Measuring Instruments - Surface Structure
05100300 - Measuring Instruments - Dimensional Accuracy
05100400 - Measuring Instruments - Material Properties
05100401 - Mechanical
05100402 - Thermal
05100403 - Chemical
05100404 - Other Measuring Instruments – Material Properties
05100500 - Image Processing and Optical Sensors
05100600 - Other Measuring and Testing Technology
05110000 - Machines for Recycling
05120000 - Consumables
05120100 - Vacuum Bagging etc.
05120200 - Mould Release Agents
05120300 - Safety Products
05120400 - Adhesives
05120500 - Other Consumable Materials
06000000 - Manufacturer of Products
06010000 - Panels
06020000 - Sandwich Panels
06030000 - Tubes
06040000 - Profiles
06050000 - Containers
06060000 - Moulded Parts
06060100 - Prototypes
06060200 - Series Production
06070000 - Other Manufacturer of Products
06080000 - Continuous plate production
07000000 - Composite Products
07010000 - Glass Fibre Reinforced Plastics
07020000 - Carbon Fibre Reinforced Plastics
07030000 - Aramid Fibre Reinforced Plastics
07040000 - Natural Fibre Reinforced Plastics
07050000 - Metal Fibre Polymer Composites
07060000 - Metal Matrix Composites
07070000 - Ceramic Matrix Composites
07080000 - Metal Ceramic Composites
07090000 - Carbon Fibre Reinforced Carbon
07100000 - Fibre Reinforced Concrete
07110000 - Other Composite Products
08000000 - Components / Products for Application Industries
08010000 - Automotive (Cars and Trucks)
08020000 - Building / Construction
08030000 - Civil Engineering / Infrastructure
08040000 - Rail / Buses / Mass Transportation
08050000 - Electrical / Electronics
08060000 - Aircraft / Aerospace
08070000 - Industrial / General Engineering
08080000 - Consumer Products
08090000 - Corrosion Protection / Chemical Resistant Equipment
08100000 - Agriculture
08110000 - Marine / Shipbuilding
08120000 - Medical
08130000 - Offshore
08140000 - Sports, Leisure
08150000 - Defence
08160000 - Water Testing / Sewage
08170000 - Wind Energy
08180000 - Other Parts / Products for Application Industries
09000000 - Other Services
09010000 - Services
09010100 - Distributors
09010200 - Consultants
09010300 - Research Institutes / Organisations
09010400 - Educational / Training Institutions
09010500 - Independent Testing Organisations
09010600 - Publications / Publishers
09010700 - Recycling Services
09010800 - Standards Organizations
09010900 - Trade Associations
09011000 - CAD / CAM Services
09011100 - Quality Assurance
09011200 - Prototype Construction
09011300 - Simulation / Dimensioning
09011400 - Fire Protection Systems
09011500 - Other Services
09020000 - Software
09020100 - Design
09020200 - Cost Estimating
09020300 - Materials Databases
09020400 - Machine Control
09020500 - Simulation
09020501 - Finite Element Simulation
09020502 - Process Simulation
10000000 - Miscellaneous
10010000 - Miscellaneous
170
1000000 - 01010105Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors
01000000 Rohmaterialien
Raw Materials
01010100 Chemische Grundprodukte - Harze 01010100 Chemische Grundprodukte Harze
Chemicals - Resins
Airtech Europe Sarl 4/C21
altropol Kunststoff GmbH 4/B29
BÜFA Composites GmbH & Co KG 4/D38, 4/PDA_F
Europea D.o.o. 4/E32
G. Angeloni Srl 4/C08
Gößl & Pfaff GmbH 4/A11
HARKE Chemicals GmbH 4/D23
Hexcel Composites SA 4/D29
HP-Textiles GmbH 6/E24, PDA_Foyer_1
Lange+Ritter GmbH - Faserverstärkte Kunststoffe 4/D29
Neue Materialien Bayreuth GmbH 6/B04
NORD COMPOSITES 4/B25
PANADUR GmbH 4/E40
Permabond Engineering Adhesives LTD 4/A25
SAATI S.p.A. 6/E28
SICOMIN - EPOXY SYSTEMS 4/B41
Vaber Industriale SPA 6/C03
VELOX GmbH 4/B18
VOSSCHEMIE GmbH 4/C28
WELA Handelsgesellschaft mbH 4/A28
01010101 Chemische Grundprodukte - Epoxid 01010101 Chemische Grundprodukte Epoxid
p yChemicals - Epoxy
Adesso Advanced Materials Wuxi Co.,Ltd 6/B36j
altropol Kunststoff GmbH 4/B29
AXSON Technologies - Axson GmbH 4/B22
BASF SE 4/B26
Dow Europe GmbH - The Dow Chemical Company 4/D40c
ebalta Kunststoff GmbH 4/A18
ELANTAS ITALIA Srl 6/B01
Esterlössl GmbH 4/A02
Evonik Industries AG 4/B16
FARRL GmbH 4/F41
GRM Systems s.r.o. 4/F21
Gurit (UK) 4/D07
HACOTECH GmbH 4/C17
HARKE Chemicals GmbH 4/D23
HP-Textiles GmbH 6/E24, PDA_Foyer_1
Kaneka Belgium NV 4/F36
KÖMMERLING CHEMISCHE FABRIK GMBH 4/D24
mates italiana srl 6/E02
Mühlmeier Composite 4/B14
Permabond Engineering Adhesives LTD 4/A25
RAMPF Tooling GmbH & Co. KG 4/A12
SAATI S.p.A. 6/E28
Scigrip Adhesives Limited 4/E24
SICOMIN - EPOXY SYSTEMS 4/B41
Sika Deutschland GmbH 4/A24
01010102 Chemische Grundprodukte - Polyester01010102 Chemische Grundprodukte Polyester
yChemicals - Polyester
AOC LLC - International Office 4/E36
CCP Composites 4/D20a, PDA_Foyer_3
Emil Frei GmbH & Co. KG 4/D26
HARKE Chemicals GmbH 4/D23
Mühlmeier Composite 4/B14
Pultex Kunststofftechnikhandel GmbH 4/F35
Reichhold AS 4/C28
01010103 Chemische Grundprodukte - Vinylester01010103 Chemische Grundprodukte Vinylester
yChemicals - Vinyl Ester
AOC LLC - International Office 4/E36
CCP Composites 4/D20a, PDA_Foyer_3
Evonik Industries AG 4/B16
FARRL GmbH 4/F41
HARKE Chemicals GmbH 4/D23
Mühlmeier Composite 4/B14
Pultex Kunststofftechnikhandel GmbH 4/F35
Reichhold AS 4/C28
01010104 Chemische Grundprodukte - Phenolharz01010104 Chemische Grundprodukte Phenolharz
Chemicals - Phenolic
FARRL GmbH 4/F41
Momentive Speciality Chemicals Gmbh 4/E42
SAATI S.p.A. 6/E28
01010105 Chemische Grundprodukte - PUR01010105 Chemische Grundprodukte PUR
Chemicals - PUR
altropol Kunststoff GmbH 4/B29
AXSON Technologies - Axson GmbH 4/B22
BASF SE 4/B26
Dow Europe GmbH - The Dow Chemical Company 4/D40c
ebalta Kunststoff GmbH 4/A18
ELANTAS ITALIA Srl 6/B01
Emil Frei GmbH & Co. KG 4/D26
Exact Plastics GmbH 6/F24
KÖMMERLING CHEMISCHE FABRIK GMBH 4/D24
Permabond Engineering Adhesives LTD 4/A25
Pultex Kunststofftechnikhandel GmbH 4/F35
RAMPF Tooling GmbH & Co. KG 4/A12
171
01010105 - 01030300Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors
Sika Deutschland GmbH 4/A24
VOSSCHEMIE GmbH 4/C28
01010106 Chemische Grundprodukte - Silikon 01010106 Chemische Grundprodukte Silikon
Chemicals - Silicone
altropol Kunststoff GmbH 4/B29
ebalta Kunststoff GmbH 4/A18
ELANTAS ITALIA Srl 6/B01
KauPo Plankenhorn e.K. 4/B40
KÖMMERLING CHEMISCHE FABRIK GMBH 4/D24
VOSSCHEMIE GmbH 4/C28
01010107 Chemische Grundprodukte - Klebeharze 01010107 Chemische Grundprodukte Klebeharze
Chemicals - Adhesive resins
AXSON Technologies - Axson GmbH 4/B22
BASF SE 4/B26
ELANTAS ITALIA Srl 6/B01
Industria Chimica Reggiana I.C.R SPA 6/B02
Lange+Ritter GmbH - Faserverstärkte Kunststoffe 4/D29
mates italiana srl 6/E02
Permabond Engineering Adhesives LTD 4/A25
Reichhold AS 4/C28
Scigrip Adhesives Limited 4/E24
01010108 Chemische Grundprodukte - Sonstige Harze 01010108 Chemische Grundprodukte Sonstige Harze
Chemicals - Other Resins
GRM Systems s.r.o. 4/F21
Industria Chimica Reggiana I.C.R SPA 6/B02
Lange+Ritter GmbH - Faserverstärkte Kunststoffe 4/D29
Reichhold AS 4/C28
Scigrip Adhesives Limited 4/E24
SICOMIN - EPOXY SYSTEMS 4/B41
Umicore Specialty Materials Brugge 4/E35
01010200 Chemische Grundprodukte - Härter 01010200 Chemische Grundprodukte Härter
Chemicals - Hardeners
Adesso Advanced Materials Wuxi Co.,Ltd 6/B36j
altropol Kunststoff GmbH 4/B29
ebalta Kunststoff GmbH 4/A18
FARRL GmbH 4/F41
HARKE Chemicals GmbH 4/D23
Lange+Ritter GmbH - Faserverstärkte Kunststoffe 4/D29
PANADUR GmbH 4/E40
Permabond Engineering Adhesives LTD 4/A25
RAMPF Tooling GmbH & Co. KG 4/A12
01010300 Chemische Grundprodukte - Gelcoats 01010300 Chemische Grundprodukte Gelcoats
Chemicals - Gel Coats
altropol Kunststoff GmbH 4/B29
CCP Composites 4/D20a, PDA_Foyer_3
Chromaflo Technologies B.V. 6/A40
ebalta Kunststoff GmbH 4/A18
ELANTAS ITALIA Srl 6/B01
Emil Frei GmbH & Co. KG 4/D26
HACOTECH GmbH 4/C17
Lange+Ritter GmbH - Faserverstärkte Kunststoffe 4/D29
Mühlmeier Composite 4/B14
PANADUR GmbH 4/E40
RAMPF Tooling GmbH & Co. KG 4/A12
Reichhold AS 4/C28
01010400 Sonstige chemische Grundprodukte 01010400 Sonstige chemische Grundprodukte
Other Chemicals
Evonik Industries AG 4/B16
Lefatex-Chemie GmbH 6/E36
Münch Chemie International GmbH 4/B24
PANADUR GmbH 4/E40
01020100 Füllstoffe - Fasern 01020100 Füllstoffe Fasern
Fillers - (Short) fibres
DBF - Deutsche Basalt Faser GmbH 4/D03
Kelheim Fibres GmbH 6/E36
Mondi 4/E41
01020200 Füllstoffe - Pulver 01020200 Füllstoffe Pulver
Fillers - Powder
altropol Kunststoff GmbH 4/B29
Kunshan Detai Metal Technology Co.,Ltd 6/B36c
01020300 Füllstoffe - Kugeln 01020300 Füllstoffe Kugeln
Fillers - Pellets
VELOX GmbH 4/B18
01030100 Additive - Verarbeitungshilfsmittel 01030100 Additive Verarbeitungshilfsmittel
gAdditives - Processing Aids
FARRL GmbH 4/F41
Münch Chemie International GmbH 4/B24
VELOX GmbH 4/B18
01030200 Additive - Eigenschaftsmodifier 01030200 Additive Eigenschaftsmodifier
Additives - Modifiers
Chromaflo Technologies B.V. 6/A40
Evonik Industries AG 4/B16
FARRL GmbH 4/F41
FutureCarbon GmbH 4/F42
Kaneka Belgium NV 4/F36
01030300 Additive - Beschleuniger 01030300 Additive Beschleuniger
Additives - Accelerators
FARRL GmbH 4/F41
Umicore Specialty Materials Brugge 4/E35
172
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors1030400 - 01060000
01030400 Additive - Farbstoffe / Pigmente 01030400 Additive Farbstoffe / Pigmente
y gAdditives - Dyes / Pigments
Chromaflo Technologies B.V. 6/A40
01030500 Additive - Nanopartikel 01030500 Additive Nanopartikel
pAdditives - Nanoparticles
Evonik Industries AG 4/B16
FutureCarbon GmbH 4/F42
Friedrich-Schiller-Universität Jena - Physikalisch-Astronomische
Fakultät Institut für Materialwissenschaft und Werkstofftechnologie 4/C22
01030600 Additive - Farbpasten 01030600 Additive Farbpasten
yAdditives - Dye Pastes
altropol Kunststoff GmbH 4/B29
Chromaflo Technologies B.V. 6/A40
Emil Frei GmbH & Co. KG 4/D26
01030700 Sonstige Additive 01030700 Sonstige Additive
Other Additives
Advanced Compounding Rudolstadt GmbH 6/G25
Chromaflo Technologies B.V. 6/A40
Umicore Specialty Materials Brugge 4/E35
01040000 Thermoplaste 01040000 Thermoplaste
pThermoplastics
ASP Plastics GmbH 6/F15
Cato Composite Innovations BV - PO Box 26 6/D12
MITSUBISHI GAS CHEMICAL CO., INC. 4/F28
SAERTEX GmbH & Co. KG 6/A06
TenCate Advanced Composites 4/B34
01050100 Kernmaterialien - Schaumstrukturen 01050100 Kernmaterialien Schaumstrukturen
Core Materials - Foam structure
3A Composites GmbH 4/B43
3A Composites Airex AG 6/A04
3D-CORE - Extended Structured Composites GmbH & Co.KG 4/A06
Aramicore Composite Co., LTD. 6/B36g
ASP Plastics GmbH 6/F15
BASF SE 4/B26
Carus Srl 6/D02
CEL Components S.r.l. 6/E04
DIAB GmbH 4/F25
Gaugler & Lutz oHG 6/A04
Gößl & Pfaff GmbH 4/A11
mates italiana srl 6/E02
OBO-Werke GmbH & Co. KG 6/E36
SAERTEX GmbH & Co. KG 6/A06
Schaumform GmbH 6/B16
01050101 Kernmaterialien - Thermoplaste 01050101 Kernmaterialien Thermoplaste
pCore Materials - Thermoplastic Resin
3A Composites Airex AG 6/A04
ASP Plastics GmbH 6/F15
EATC European Alliance for Thermoplastic Composites - c/o AVK e.V. 4/A44
Evonik Industries AG 4/B16
Gaugler & Lutz oHG 6/A04
SAERTEX GmbH & Co. KG 6/A06
ThermHex Waben GmbH 6/E38
01050102 Kernmaterialien - Duroplaste 01050102 Kernmaterialien Duroplaste
gCore Materials - Thermosetting Resin
3A Composites Airex AG 6/A04
Aramicore Composite Co., LTD. 6/B36g
Carus Srl 6/D02
Gaugler & Lutz oHG 6/A04
Paul Bauder GmbH & Co. KG 4/B42
01050200 Kernmaterialien - Wabenstrukturen 01050200 Kernmaterialien Wabenstrukturen
yCore Materials - Honeycomb Structures
3A Composites GmbH 4/B43
Aramicore Composite Co., LTD. 6/B36g
BASF SE 4/B26
CEL Components S.r.l. 6/E04
COREX-HONEYCOMB a devision of Encocam Ltd. 6/F42
Plascore GmbH & Co KG 6/G33
SWAP (Sachsen) GmbH - Verbundwerkstoffe 4/E17
TenCate Advanced Composites 4/B34
ThermHex Waben GmbH 6/E38
TUBUS WABEN GmbH & Co.KG 6/D36
01050300 Kernmaterialien - Natürliche Werkstoffe 01050300 Kernmaterialien Natürliche Werkstoffe
Core Materials - Natural Materials
3A Composites Airex AG 6/A04
Bcomp Ltd. 4/D05
Gaugler & Lutz oHG 6/A04
01050400 Kernmaterialien - laminierbare oder imprägnierbare 01050400 Kernmaterialien laminierbare oder imprägnierbare
KernwerkstoffeKernwerkstoffe
Core Materials - Laminatable or ImpregnatableCore Materials Laminatable or Impregnatable
Core Materials
Mühlmeier Composite 4/B14
Nanjing Loyalty Composite Equipment Manufacture Co. Ltd. 6/A21
Paul Bauder GmbH & Co. KG 4/B42
SAERTEX GmbH & Co. KG 6/A06
Spheretex GmbH 4/C28
ThermHex Waben GmbH 6/E38
VOSSCHEMIE GmbH 4/C28
01050500 Sonstige Kernmaterialien 01050500 Sonstige Kernmaterialien
Other Core Materials
3A Composites GmbH 4/B43
3A Composites Airex AG 6/A04
ASP Plastics GmbH 6/F15
Gurit (UK) 4/D07
Lantor B.V. 4/D40g
OBO-Werke GmbH & Co. KG 6/E36
01060000 Sonstige Rohmaterialien 01060000 Sonstige Rohmaterialien
Other Raw Materials
ASP Plastics GmbH 6/F15
173
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors02000000 - 02010700
02000000 Fasern, Faserprodukte, Halb- und Zwischenprodukte
Fibres, Fibre Products, Intermediate and Semi-finished
Products
02010100 Verstärkungen / Fasern - Glasfasern 02010100 Verstärkungen / Fasern Glasfasern
Reinforcements / Fibres - Glass Fibres
3B Fibreglass 4/B03
Airtech Europe Sarl 4/C21
J.H. vom Baur Sohn GmbH & Co. KG 6/C36
CAM ELYAF SAN. A.S. - SISECAM 6/D22
Delcotex Delius - Techtex GmbH & Co. KG 4/F14
ECTA - Handelsgesellschaft GmbH 4/D40a
FORMAX 4/E02
Güth & Wolf GmbH 4/E29
HACOTECH GmbH 4/C17
HEXAGON DEVOLD AS 4/D14
ICD / ITKE Universität Stuttgart 4/C02, PDA_Foyer_2
IFC Composite GmbH 6/D28
Jiangsu Changhai Composite Materials Holding Co.,ltd. 6/B36d
Johns Manville Slovakia AS 6/B11
Kelteks d.o.o. tvornice tekstila 4/D13
F.A. Kümpers GmbH & Co. KG 6/E36
Mühlmeier Composite 4/B14
PD FibreGlass - P-D Glasseiden GmbH Oschatz 4/D15
Spheretex GmbH 4/C28
Stükerjürgen Aerospace GmbH & Co. KG 6/E46
Universal star group limited 6/B36a
Vaber Industriale SPA 6/C03
VELOX GmbH 4/B18
VOSSCHEMIE GmbH 4/C28
02010200 Verstärkungen / Fasern - Kohlenstofffasern 02010200 Verstärkungen / Fasern Kohlenstofffasern
Reinforcements / Fibres - Carbon Fibres
Airtech Europe Sarl 4/C21
J.H. vom Baur Sohn GmbH & Co. KG 6/C36
Braca-Sport LTD 4/F02
CARBOMID - BIRLIK TICARET TURK AS 4/F26
CSA COMPOSITE 4/E01
Gößl & Pfaff GmbH 4/A11
Güth & Wolf GmbH 4/E29
HACOTECH GmbH 4/C17
Hexcel Composites SA 4/D29
Holding Company Composite 4/F23
ICD / ITKE Universität Stuttgart 4/C02, PDA_Foyer_2
mates italiana srl 6/E02
Mitsubishi Rayon Co. Ltd. 4/D22
MUBEA CARBO TECH GMBH 6/B18
Mühlmeier Composite 4/B14
Nanjing Loyalty Composite Equipment Manufacture Co. Ltd. 6/A21
SGL TECHNOLOGIES GmbH 4/F01
Stükerjürgen Aerospace GmbH & Co. KG 6/E46
TK Industries GmbH 6/B04
Toho Tenax Europe GmbH 4/C12
Toray International Europe GmbH 4/D16
Vaber Industriale SPA 6/C03
Zoltek Zrt. 4/C15
02010201 Verstärkungen / Fasern - Gewebte Schläuche / Bänder 02010201 Verstärkungen / Fasern Gewebte Schläuche / Bänder
pReinforcements / Fibres - Woven Tubes / Tapes
J.H. vom Baur Sohn GmbH & Co. KG 6/C36
Gustav Gerster GmbH & Co. KG - Geschäftsbereich Gerster TechTex 4/D05
Güth & Wolf GmbH 4/E29
LIANYUNGANG TIANHONG TUBES INDUSTRY Co., Ltd. 6/B36f
02010202 Verstärkungen / Fasern - Geflochtene Schläuche / Litzen02010202 Verstärkungen / Fasern Geflochtene Schläuche / Litzen
Reinforcements / Fibres - Braided Tubes / Wires
Barthels-Feldhoff GmbH & Co. KG 6/C36
Gustav Gerster GmbH & Co. KG - Geschäftsbereich Gerster TechTex 4/D05
Güth & Wolf GmbH 4/E29
LIANYUNGANG TIANHONG TUBES INDUSTRY Co., Ltd. 6/B36f
SILTEX Holzmüller W. GmbH & Co KG - Flecht-u. Isoliertechnologie 4/B15
02010300 Verstärkungen / Fasern - Aramidfasern02010300 Verstärkungen / Fasern Aramidfasern
Reinforcements / Fibres - Aramid Fibres
Aramicore Composite Co., LTD. 6/B36g
J.H. vom Baur Sohn GmbH & Co. KG 6/C36
CARBOMID - BIRLIK TICARET TURK AS 4/F26
Delcotex Delius - Techtex GmbH & Co. KG 4/F14
Güth & Wolf GmbH 4/E29
Lange+Ritter GmbH - Faserverstärkte Kunststoffe 4/D29
02010400 Verstärkungen / Fasern - Naturfasern02010400 Verstärkungen / Fasern Naturfasern
Reinforcements / Fibres - Natural Fibres
Advanced Compounding Rudolstadt GmbH 6/G25
Bcomp Ltd. 4/D05
Forum Technologie und Wirtschaft e.V. - BasaltFaserNetzwerk 4/D03
Güth & Wolf GmbH 4/E29
Incotelogy Ltd. - Basalt Fiber Products 4/E27
Kelheim Fibres GmbH 6/E36
Mondi 4/E41
SWAP (Sachsen) GmbH - Verbundwerkstoffe 4/E17
02010500 Verstärkungen / Fasern - Metallfasern02010500 Verstärkungen / Fasern Metallfasern
Reinforcements / Fibres - Metal Fibres
J.H. vom Baur Sohn GmbH & Co. KG 6/C36
Güth & Wolf GmbH 4/E29
02010600 Sonstige Verstärkungen / Fasern02010600 Sonstige Verstärkungen / Fasern
Other Reinforcements / Fibres
ACC Technologies GmbH & Co. KG 4/C02
Barthels-Feldhoff GmbH & Co. KG 6/C36
BÜFA Composites GmbH & Co KG 4/D38, 4/PDA_F
DBF - Deutsche Basalt Faser GmbH 4/D03
GRM Systems s.r.o. 4/F21
HEXAGON DEVOLD AS 4/D14
Johns Manville Slovakia AS 6/B11
Kelheim Fibres GmbH 6/E36
02010700 Verstärkungen / Fasern - Basaltfasern02010700 Verstärkungen / Fasern Basaltfasern
Reinforcements / Fibres - Basalt Fibre
BASALTEX NV 4/D01
gyIncotelogy Ltd. - Basalt Fiber Products 4/E27
STS - Textiles 4/D03
Zhejiang Hengdian - GBF Basalt Fibre Co. Ltd 6/B36b
174
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors02020000 - 02040200
02020000 Schnittfasern, Langfasern 02020000 Schnittfasern, Langfasern
pp gChopped Fibres, Long Fibres
3B Fibreglass 4/B03
DBF - Deutsche Basalt Faser GmbH 4/D03
ECTA - Handelsgesellschaft GmbH 4/D40a
FORMAX 4/E02
Holding Company Composite 4/F23
Incotelogy Ltd. - Basalt Fiber Products 4/E27
Johns Manville Slovakia AS 6/B11
Kelheim Fibres GmbH 6/E36
Mitsubishi Rayon Co. Ltd. 4/D22
PD FibreGlass - P-D Glasseiden GmbH Oschatz 4/D15
Toho Tenax Europe GmbH 4/C12
Zoltek Zrt. 4/C15
02030000 Rovings 02030000 Rovings
gRovings
3B Fibreglass 4/B03
BASALTEX NV 4/D01
DBF - Deutsche Basalt Faser GmbH 4/D03
ECTA - Handelsgesellschaft GmbH 4/D40a
Forum Technologie und Wirtschaft e.V. - BasaltFaserNetzwerk 4/D03
Holding Company Composite 4/F23
Incotelogy Ltd. - Basalt Fiber Products 4/E27
Jiangsu Changhai Composite Materials Holding Co.,ltd. 6/B36d
Johns Manville Slovakia AS 6/B11
PD FibreGlass - P-D Glasseiden GmbH Oschatz 4/D15
02040100 Faserhalbzeuge flächig - Gewebe 02040100 Faserhalbzeuge flächig Gewebe
pTextiles (planar) - Fabrics
altropol Kunststoff GmbH 4/B29
BASALTEX NV 4/D01
Braca-Sport LTD 4/F02
CARBOMID - BIRLIK TICARET TURK AS 4/F26
CHOMARAT Textiles Industries 4/B30
DBF - Deutsche Basalt Faser GmbH 4/D03
Delcotex Delius - Techtex GmbH & Co. KG 4/F14
ECTA - Handelsgesellschaft GmbH 4/D40a
Esterlössl GmbH 4/A02, PDA_Foyer_5
FORMAX 4/E02
Gustav Gerster GmbH & Co. KG - Geschäftsbereich Gerster TechTex 4/D05
Hexcel Composites SA 4/D29
Holding Company Composite 4/F23
HP-Textiles GmbH 6/E24, PDA_Foyer_1
Incotelogy Ltd. - Basalt Fiber Products 4/E27
Innotect GmbH 4/F39
ITV Institut für Textil- und Verfahrenstechnik 4/C02
Jiangsu Jiuding New Material Co Ltd. 6/B36h
Kelteks d.o.o. tvornice tekstila 4/D13
F.A. Kümpers GmbH & Co. KG 6/E36
Mitsubishi Rayon Co. Ltd. 4/D22
PD FibreGlass - P-D Glasseiden GmbH Oschatz 4/D15
SAATI S.p.A. 6/E28
SGL TECHNOLOGIES GmbH 4/F01
SICOMIN - EPOXY SYSTEMS 4/B41
Sigmatex (UK) Ltd 4/F05
Spheretex GmbH 4/C28
Tissa Glasweberei AG 4/A01
VELOX GmbH 4/B18
WELA Handelsgesellschaft mbH 4/A28
Zoltek Zrt. 4/C15
02040200 Faserhalbzeuge flächig - Gelege02040200 Faserhalbzeuge flächig Gelege
p pTextiles (planar) - Non-crimp Fabrics
altropol Kunststoff GmbH 4/B29
BASALTEX NV 4/D01
Bcomp Ltd. 4/D05
Cetex Institut für Textil- und - Verarbeitungsmaschinen gGmbH 4/D03
CHOMARAT Textiles Industries 4/B30
Delcotex Delius - Techtex GmbH & Co. KG 4/F14
ECTA - Handelsgesellschaft GmbH 4/D40a
175
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors02040200 - 02060100
Esterlössl GmbH 4/A02, PDA_Foyer_5
Gustav Gerster GmbH & Co. KG - Geschäftsbereich Gerster TechTex 4/D05
HEXAGON DEVOLD AS 4/D14
Holding Company Composite 4/F23
HP-Textiles GmbH 6/E24, PDA_Foyer_1
Incotelogy Ltd. - Basalt Fiber Products 4/E27
Keim Kunststofftechnik GmbH 6/A10
F.A. Kümpers GmbH & Co. KG 6/E36
LIBA Maschinenfabrik GmbH 6/B04
Mitsubishi Rayon Co. Ltd. 4/D22
PD FibreGlass - P-D Glasseiden GmbH Oschatz 4/D15
SAATI S.p.A. 6/E28
SAERTEX GmbH & Co. KG 6/A06
SELCOM S.r.l. - Multiaxial Technology 6/G01
SGL TECHNOLOGIES GmbH 4/F01
Sigmatex (UK) Ltd 4/F05
Spheretex GmbH 4/C28
02040300 Faserhalbzeuge flächig - Vlies 02040300 Faserhalbzeuge flächig Vlies
pTextiles (planar) - Non-wovens
anowo ltd 4/F20
BASALTEX NV 4/D01
DBF - Deutsche Basalt Faser GmbH 4/D03
Holding Company Composite 4/F23
Isowood GmbH 6/B28
Johns Manville Slovakia AS 6/B11
Norafin Industries (Germany) GmbH 4/D03
02040400 Sonstige Faserhalbzeuge flächig 02040400 Sonstige Faserhalbzeuge flächig
pOther Textiles (planar)
ACC Technologies GmbH & Co. KG 4/C02
Cetex Institut für Textil- und - Verarbeitungsmaschinen gGmbH 4/D03
CoTexx GmbH 6/B04
Forum Technologie und Wirtschaft e.V. - BasaltFaserNetzwerk 4/D03
F.A. Kümpers GmbH & Co. KG 6/E36
SAERTEX GmbH & Co. KG 6/A06
SELCOM S.r.l. - Multiaxial Technology 6/G01
SILTEX Holzmüller W. GmbH & Co KG - Flecht-u. Isoliertechnologie 4/B15
02050100 Faserhalbzeuge rund / geschlossen - Geflechte02050100 Faserhalbzeuge rund / geschlossen Geflechte
Textiles (tubular) - Meshwork
Barthels-Feldhoff GmbH & Co. KG 6/C36
Innotect GmbH 4/F39
ITV Institut für Textil- und Verfahrenstechnik 4/C02
Munich Composites GmbH 4/D02
SILTEX Holzmüller W. GmbH & Co KG - Flecht-u. Isoliertechnologie 4/B15
02050200 Faserhalbzeuge rund / geschlossen - Gestricke02050200 Faserhalbzeuge rund / geschlossen Gestricke
Textiles (tubular) - Knitted Fabrics
Hofer Textilveredelung GmbH 6/B04
Innotect GmbH 4/F39
STS - Textiles 4/D03
02050300 Faserhalbzeuge rund / geschlossen - Glasfasern -02050300 Faserhalbzeuge rund / geschlossen Glasfasern
Gewebte Schläuche / BänderGewebte Schläuche / Bänder
pTextiles (tubular) - Glass Fibres - Woven Tubes / Tapes
J.H. vom Baur Sohn GmbH & Co. KG 6/C36
02050400 Faserhalbzeuge rund / geschlossen - Glasfasern -02050400 Faserhalbzeuge rund / geschlossen Glasfasern
Geflochtene Schläuche / LitzenGeflochtene Schläuche / Litzen
Textiles (tubular) - Glass Fibres - Braided Tubes / Wires
Barthels-Feldhoff GmbH & Co. KG 6/C36
Innotect GmbH 4/F39
02050500 Sonstige Faserhalbzeuge rund / geschlossen02050500 Sonstige Faserhalbzeuge rund / geschlossen
Other Textiles (tubular)
Barthels-Feldhoff GmbH & Co. KG 6/C36
CoTexx GmbH 6/B04
Innotect GmbH 4/F39
F.A. Kümpers GmbH & Co. KG 6/E36
SAERTEX GmbH & Co. KG 6/A06
SILTEX Holzmüller W. GmbH & Co KG - Flecht-u. Isoliertechnologie 4/B15
02060100 Prepregs - Duroplaste02060100 Prepregs Duroplaste
p gPrepregs - Thermoset
Adesso Advanced Materials Wuxi Co.,Ltd 6/B36j
AXSON Technologies - Axson GmbH 4/B22
Braca-Sport LTD 4/F02
Cytec 4/B21
DELTA-PREG S.P.A. UNINOMINALE 4/C14
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Esterlössl GmbH 4/A02, PDA_Foyer_5
gG. Angeloni Srl 4/C08
Gurit (UK) 4/D07
HACOTECH GmbH 4/C17
Hexcel Composites SA 4/D29
Holland Composites Pavilion 4/A32 - 4/B37
KREMPEL GmbH 4/D10
mates italiana srl 6/E02
Mitsubishi Rayon Co. Ltd. 4/D22
176
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors02060100 - 03020100
SGL TECHNOLOGIES GmbH 4/F01
pTCR Composites 4/B11
TenCate Advanced Composites 4/B34
Toray International Europe GmbH 4/D16
Kunststoffverarbeitung Wimmer GmbH 6/D04
02060200 Prepregs - Thermoplaste 02060200 Prepregs Thermoplaste
p g pPrepregs - Thermoplastic
BASF SE 4/B26
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
EATC European Alliance for Thermoplastic Composites - c/o AVK e.V. 4/A44
Evonik Industries AG 4/B16
Exact Plastics GmbH 6/F24
Gurit (UK) 4/D07
Holding Company Composite 4/F23
KREMPEL GmbH 4/D10
Lange+Ritter GmbH - Faserverstärkte Kunststoffe 4/D29
MITSUBISHI GAS CHEMICAL CO., INC. 4/F28
SAATI S.p.A. 6/E28
SGL TECHNOLOGIES GmbH 4/F01
SILTEX Holzmüller W. GmbH & Co KG - Flecht-u. Isoliertechnologie 4/B15
SKM GmbH - Schwergewebe Konfektion Moers GmbH 4/F03
TenCate Advanced Composites 4/B34
Toho Tenax Europe GmbH 4/C12
Toray International Europe GmbH 4/D16
WELA Handelsgesellschaft mbH 4/A28
02070100 Pressmassen - Duroplaste 02070100 Pressmassen Duroplaste
g pMoulding Compounds - Thermoset
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
TenCate Advanced Composites 4/B34
Toray International Europe GmbH 4/D16
02070101 Pressmassen - SMC 02070101 Pressmassen SMC
g pMoulding Compounds - SMC
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
02070102 Pressmassen - BMC 02070102 Pressmassen BMC
g pMoulding Compounds - BMC
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
02070103 Pressmassen - Sonstige Duroplaste 02070103 Pressmassen Sonstige Duroplaste
g pMoulding Compounds - Other Thermosets
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
02070200 Pressmassen - Thermoplaste 02070200 Pressmassen Thermoplaste
g p pMoulding Compounds - Thermoplastic
CHOMARAT Textiles Industries 4/B30
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Dutch Thermoplastic Components 4/A38
MITSUBISHI GAS CHEMICAL CO., INC. 4/F28
SAERTEX GmbH & Co. KG 6/A06
SKM GmbH - Schwergewebe Konfektion Moers GmbH 4/F03
Taixing Youngsun FL-Plastics Co., Ltd. 6/B36e
Toray International Europe GmbH 4/D16
02070201 Pressmassen - GMT02070201 Pressmassen GMT
g pMoulding Compounds - GMT
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Quadrant Plastic Composites AG 6/B22
02070202 Pressmassen - LFT02070202 Pressmassen LFT
g pMoulding Compounds - LFT
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Quadrant Plastic Composites AG 6/B22
02070203 Pressmassen - Sonstige Thermoplaste02070203 Pressmassen Sonstige Thermoplaste
g p pMoulding Compounds - Other Thermoplastics
BASF SE 4/B26
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
EATC European Alliance for Thermoplastic Composites - c/o AVK e.V. 4/A44
02080000 Sonstige Fasern, Faserprodukte, Halb- und Zwischenprodukte02080000 Sonstige Fasern, Faserprodukte, Halb und Zwischenprodukte
Other Fibres, Fibre Products, Intermediate andOther Fibres, Fibre Products, Intermediate and
Semi-Finished Products
BASF SE 4/B26
CHOMARAT Textiles Industries 4/B30
CoTexx GmbH 6/B04
GRM Systems s.r.o. 4/F21
Kelheim Fibres GmbH 6/E36
Trans-Textil GmbH 4/B12
03000000 Verarbeiter
Manufacturers using
03010000 Autoklavverfahren03010000 Autoklavverfahren
Autoclave
all ahead composites GmbH - bike ahead composites 6/G04
BREBECK Composite s.r.o. 6/F25
c2i s.r.o. 4/A10
Connova AG 4/B10
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
Die Wethje GmbH Kunststofftechnik 4/B04
Germa Composite GmbH 6/C40
HUBER+SUHNER AG - Business Unit Composites 6/E30
KNF FLEXPAK CORPORATION 6/G39d
KREMPEL GmbH 4/D10
NB-Carbon 6/G19
Premier Hose Technologies Ltd. 4/A15
Terruzzi Fercalx S.P.A 6/E01
ZCK Zuschnittcenter u. Faserverbundtechnik Gmbh & Co. KG 6/B04
03020100 geschlossene Flüssigimprägnierverfahren - RTM03020100 geschlossene Flüssigimprägnierverfahren RTM
Closed Mould Processes - RTM
anowo ltd 4/F20
c2i s.r.o. 4/A10
Connova AG 4/B10
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Die Wethje GmbH Kunststofftechnik 4/B04
First COMPOSITES GmbH 6/B31
HACO S.a.r.l. 4/F17
KEGELMANN TECHNIK GmbH 4/A14
Keim Kunststofftechnik GmbH 6/A10
Magnum Venus Plastech 6/A33
MUBEA CARBO TECH GMBH 6/B18
Munich Composites GmbH 4/D02
Neue Materialien Bayreuth GmbH 6/B04
NOVACOM - Verstärkte Kunststoffe GmbH 4/D40d
Oerlikon Barmag - Zweigniederlassung der Oerlikon Textile GmbH & Co. KG 6/A23
177
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors03020100 - 03080300
Phoenix Equipment Co. 6/G39a
SAERTEX GmbH & Co. KG 6/A06
Schuler SMG GmbH & Co. KG 6/D10
Secar Technologie GmbH 4/F09
Technische Universität Ilmenau - Fakultät Maschinenbau -
Fachgebiet Kunststofftechnik 4/C22
WICKERT Maschinenbau GmbH 6/E12
03020200 geschlossene Flüssigimprägnierverfahren - Harzinfusion 03020200 geschlossene Flüssigimprägnierverfahren Harzinfusion
Closed Mould Processes - Resin Infusion
all ahead composites GmbH - bike ahead composites 6/G04
anowo ltd 4/F20
COMPOSYST GmbH 4/B12
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Die Wethje GmbH Kunststofftechnik 4/B04
First COMPOSITES GmbH 6/B31
Germa Composite GmbH 6/C40
HACO S.a.r.l. 4/F17
Hedrich Group - Hedrich GmbH 6/A28
KEGELMANN TECHNIK GmbH 4/A14
Keim Kunststofftechnik GmbH 6/A10
MUBEA CARBO TECH GMBH 6/B18
NOVACOM - Verstärkte Kunststoffe GmbH 4/D40d
Oerlikon Barmag - Zweigniederlassung der Oerlikon Textile GmbH & Co. KG 6/A23
Stükerjürgen Aerospace GmbH & Co. KG 6/E46
Technische Universität Ilmenau - Fakultät Maschinenbau -
Fachgebiet Kunststofftechnik 4/C22
03020300 Sonstige geschlossene Flüssigimprägnierverfahren 03020300 Sonstige geschlossene Flüssigimprägnierverfahren
Other Closed Mould Processes
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Hedrich Group - Hedrich GmbH 6/A28
Nanjing Loyalty Composite Equipment Manufacture Co. Ltd. 6/A21
Phoenix Equipment Co. 6/G39a
03030100 offene Flüssigimprägnierverfahren - Handlaminieren 03030100 offene Flüssigimprägnierverfahren Handlaminieren
p y pOpen Mould Processes - Hand Lay-Up
Braca-Sport LTD 4/F02
BREBECK Composite s.r.o. 6/F25
c2i s.r.o. 4/A10
Die Wethje GmbH Kunststofftechnik 4/B04
Germa Composite GmbH 6/C40
HACO S.a.r.l. 4/F17
HUBER+SUHNER AG - Business Unit Composites 6/E30
KEGELMANN TECHNIK GmbH 4/A14
KNF FLEXPAK CORPORATION 6/G39d
NB-Carbon 6/G19
NOVACOM - Verstärkte Kunststoffe GmbH 4/D40d
Oerlikon Barmag - Zweigniederlassung der Oerlikon Textile GmbH & Co. KG 6/A23
PLASTIC GLASS S.r.l. 6/D01
03030200 offene Flüssigimprägnierverfahren - Faserspritzen 03030200 offene Flüssigimprägnierverfahren Faserspritzen
p p y pOpen Mould Processes - Spray-Up
KNF FLEXPAK CORPORATION 6/G39d
Oerlikon Barmag - Zweigniederlassung der Oerlikon Textile GmbH & Co. KG 6/A23
03030300 Sonstige offene Flüssigimprägnierverfahren 03030300 Sonstige offene Flüssigimprägnierverfahren
pOther Open Mould Processes
anowo ltd 4/F20
KNF FLEXPAK CORPORATION 6/G39d
Münch Chemie International GmbH 4/B24
Suchy Textilmaschinenbau GmbH 4/F11
03040000 Umformtechnik
gForming
2R-Tec GmbH & Co. KG 6/F17
Cato Composite Innovations BV - PO Box 26 6/D12
EM-Systeme GmbH 6/A16
Exact Plastics GmbH 6/F24
Fraunhofer-Institut für Produktionstechnologie IPT 6/A02
Schuler SMG GmbH & Co. KG 6/D10
03050000 Tapelegen03050000 Tapelegen
p y gTape Laying
Karlsruher Institut für Technologie (KIT) -
Karlsruhe Institute of Technology (KIT) 6/G37
Magnum Venus Plastech 6/A33
03060000 Faserwickeln03060000 Faserwickeln
gFilament Winding
Braca-Sport LTD 4/F02
HUBER+SUHNER AG - Business Unit Composites 6/E30
Karlsruher Institut für Technologie (KIT) -
Karlsruhe Institute of Technology (KIT) 6/G37
Magnum Venus Plastech 6/A33
McClean Anderson 6/G39e
Peak Technology GmbH 4/B04
PLASTIC GLASS S.r.l. 6/D01
Plasticon France SA 4/D20d
03070000 Pultrusion03070000 Pultrusion
Pultrusion
anowo ltd 4/F20
EPTA European Pultrusion Technology Association - c/o AVK e.V. 4/F43
Exel Composites Plc 6/A32
ITV Institut für Textil- und Verfahrenstechnik 4/C02
Jiangsu Jiuding New Material Co Ltd. 6/B36h
KREMPEL GmbH 4/D10
Secar Technologie GmbH 4/F09
03080100 Pressen - Nasspressen03080100 Pressen Nasspressen
gPress Processes - Wet Moulding
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Die Wethje GmbH Kunststofftechnik 4/B04
ITALPRESSE S.p.A 6/D14
WICKERT Maschinenbau GmbH 6/E12
03080200 Pressen - Fließpressen03080200 Pressen Fließpressen
p gPress Processes - Compression Moulding
Cato Composite Innovations BV - PO Box 26 6/D12
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Dutch Thermoplastic Components 4/A38
ITALPRESSE S.p.A 6/D14
WICKERT Maschinenbau GmbH 6/E12
03080300 Pressen - Kaltpressen03080300 Pressen Kaltpressen
gPress Processes - Cold Moulding
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Höfer Presstechnik GmbH 6/C16
ITALPRESSE S.p.A 6/D14
Suchy Textilmaschinenbau GmbH 4/F11
178
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors03080300 - 04020300
WICKERT Maschinenbau GmbH 6/E12
03080400 Pressen - Heißpressen 03080400 Pressen Heißpressen
gPress Processes - Hot Moulding
Cetex Institut für Textil- und - Verarbeitungsmaschinen gGmbH 4/D03
Connova AG 4/B10
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Hochschule Magdeburg-Stendal (FH) - KAT-Kompetenzzentrum an der
Hochschule Magdeburg-Stendal 4/C22
Höfer Presstechnik GmbH 6/C16
ITALPRESSE S.p.A 6/D14
KREMPEL GmbH 4/D10
Secar Technologie GmbH 4/F09
WICKERT Maschinenbau GmbH 6/E12
03090000 Spritzgießen 03090000 Spritzgießen
j gInjection Moulding
Cato Composite Innovations BV - PO Box 26 6/D12
Hochschule Magdeburg-Stendal (FH) - KAT-
Kompetenzzentrum an der Hochschule Magdeburg-Stendal 4/C22
Technische Universität Ilmenau - Fakultät Maschinenbau -
Fachgebiet Kunststofftechnik 4/C22
03100000 RIM 03100000 RIM
RIM
Oerlikon Barmag - Zweigniederlassung der Oerlikon Textile GmbH & Co. KG 6/A23
03110000 Recycling 03110000 Recycling
y gRecycling
Adesso Advanced Materials Wuxi Co.,Ltd 6/B36j
FORMAX 4/E02
03120000 Sonstige Verarbeiter 03120000 Sonstige Verarbeiter
Other Processors
Butzer Engineering Systems GmbH 6/E36
04000000 Weiterverarbeiter / Veredelung
Further Processors / Refiners
04010100 Oberflächenbehandlung - Reinigung 04010100 Oberflächenbehandlung Reinigung
gSurface Treatment - Cleaning
Arcotec GmbH 6/G29
gyDiener electronic GmbH + Co. KG - Plasma-Surface-Technology 4/B09
KÜNDIG GmbH 6/A26
RUWAC Industriesauger GmbH 6/B19
04010200 Oberflächenbehandlung - Lackierung04010200 Oberflächenbehandlung Lackierung
gSurface Treatment - Painting
Arcotec GmbH 6/G29
BREBECK Composite s.r.o. 6/F25
Carbonlack Dobler e.k. 6/F18
Stükerjürgen Aerospace GmbH & Co. KG 6/E46
04010300 Oberflächenbehandlung - Modifikation04010300 Oberflächenbehandlung Modifikation
Surface Treatment - Modification
Arcotec GmbH 6/G29
gyDiener electronic GmbH + Co. KG - Plasma-Surface-Technology 4/B09
KÜNDIG GmbH 6/A26
04010400 Sonstige Oberflächenbehandlung04010400 Sonstige Oberflächenbehandlung
Other Surface Treatment
Arcotec GmbH 6/G29
gyDiener electronic GmbH + Co. KG - Plasma-Surface-Technology 4/B09
Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS 4/B04
Heraeus Noblelight GmbH 4/B04
Hofer Textilveredelung GmbH 6/B04
IBT.InfraBioTech GmbH 6/G05
KÜNDIG GmbH 6/A26
Multi-Plot Europe GmbH 4/F11
04020100 Fügen - Formschlüssige Verbindung04020100 Fügen Formschlüssige Verbindung
gJoining - Positive Joints
5AXperformance GmbH 6/F19
EM-Systeme GmbH 6/A16
Fraunhofer Institut für Fertigungstechnik und Angewandte
Materialforschung IFAM 6/A02
Lord Germany GmbH 4/E33
04020200 Fügen - Kraftschlüssige Verbindung04020200 Fügen Kraftschlüssige Verbindung
g pJoining - Non-positive Joints
5AXperformance GmbH 6/F19
EM-Systeme GmbH 6/A16
04020300 Fügen - Adhäsive Verbindung04020300 Fügen Adhäsive Verbindung
g gJoining - Adhesive Joining
gyDiener electronic GmbH + Co. KG - Plasma-Surface-Technology 4/B09
Fraunhofer Institut für Fertigungstechnik und Angewandte
Materialforschung IFAM 6/A02
KÖMMERLING CHEMISCHE FABRIK GMBH 4/D24
Gummiwerk KRAIBURG GmbH & Co. KG 6/B04
Lord Germany GmbH 4/E33
Permabond Engineering Adhesives LTD 4/A25
Friedrich-Schiller-Universität Jena - Physikalisch-Astronomische
Fakultät Institut für Materialwissenschaft und Werkstofftechnologie 4/C22
Weiss Chemie + Technik GmbH & Co. KG 4/A16
179
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors04020400 - 05020600
04020400 Fügen Sonstiges 04020400 Fügen Sonstiges
gJoining Other
gyDiener electronic GmbH + Co. KG - Plasma-Surface-Technology 4/B09
EM-Systeme GmbH 6/A16
Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS 4/B04
KVT-Fastening AG - A BOSSARD COMPANY 6/E34
04030000 Trennen / Entgraten 04030000 Trennen / Entgraten
g gCutting / Trimming
BELOTTI SPA 6/E32
DJK Europe GmbH 6/G41
EM-Systeme GmbH 6/A16
Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS 4/B04
PADE - CNC 6/C11
04040000 Mechanische Bearbeitung 04040000 Mechanische Bearbeitung
gMachanical Processing
5AXperformance GmbH 6/F19
Connova AG 4/B10
DURAtec AG 6/B24
EM-Systeme GmbH 6/A16
gGUNNAR International - Weissenberger AG 6/E05
HG GRIMME SysTech GmbH 6/F29
KÜNDIG GmbH 6/A26
PADE - CNC 6/C11
04050000 Sonstige Weiterverarbeiter / Veredelung 04050000 Sonstige Weiterverarbeiter / Veredelung
Other Processors / Refiners
Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS 4/B04
Hofer Textilveredelung GmbH 6/B04
05000000 Maschinen, Anlagen, Equipment, Verbrauchsmaterialien
Machines, Equipment, Consumable Materials
05010100 Maschinen zur Faserherstellung und –aufbereitung - 05010100 Maschinen zur Faserherstellung und aufbereitung
Maschinen zur FaserherstellungMaschinen zur Faserherstellung
Machinery for Fibre Production and Preparation -Machinery for Fibre Production and Preparation
yMachinery for Fibre Production
Butzer Engineering Systems GmbH 6/E36
Linn High Therm GmbH 6/G36
05010200 Maschinen zur Faserherstellung und –aufbereitung - 05010200 Maschinen zur Faserherstellung und aufbereitung
FaserschneidtechnikFaserschneidtechnik
Machinery for Fibre Production and Preparation -Machinery for Fibre Production and Preparation
gFibre Cutting
Cetex Institut für Textil- und - Verarbeitungsmaschinen gGmbH 4/D03
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
DJK Europe GmbH 6/G41
Fill Gesellschaft m.b.H. 6/C06
FluidSystems GmbH & Co. KG 4/A37
gGUNNAR International - Weissenberger AG 6/E05
KraussMaffei Technologies GmbH 6/C08
KS-Präzisionstechnik GmbH & Co. KG 6/F16
MAKA Systems GmbH 6/A01
Van der Mast Industrial Innovations 4/B38
Rebstock Consulting GmbH & Co.KG 6/A22
RH Schneidtechnik 4/PDA_E, 6/A16
Robuso Stahlwarenfabrik - Buntenbach & Sohn GmbH 6/G31
05010300 Sonstige Maschinen zur Faserherstellung und –aufbereitung05010300 Sonstige Maschinen zur Faserherstellung und aufbereitung
y pOther Machinery for Fibre Production and Preparation
Butzer Engineering Systems GmbH 6/E36
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Phoenix Equipment Co. 6/G39a
05020200 Maschinen zur Herstellung textiler Strukturen -05020200 Maschinen zur Herstellung textiler Strukturen
Maschinen zur VliesstoffherstellungMaschinen zur Vliesstoffherstellung
Machinery for Production of Textile Structures -Machinery for Production of Textile Structures
yMachinery for Non-wovens Production
AUTEFA SOLUTIONS GERMANY GMBH 4/F11
Butzer Engineering Systems GmbH 6/E36
Elmatex GmbH - Electronic und Maschinen für die Industrie 4/F11
Klieverik Heli B.V. 4/F11
gSchott & Meissner - Maschinen- und Anlagenbau GmbH 6/E09
05020300 Maschinen zur Herstellung textiler Strukturen -05020300 Maschinen zur Herstellung textiler Strukturen
Filament-Winding-MaschinenFilament Winding Maschinen
Machinery for Production of Textile Structures -Machinery for Production of Textile Structures
gFilament-winding Machines
Magnum Venus Plastech 6/A33
McClean Anderson 6/G39e
Phoenix Equipment Co. 6/G39a
05020400 Maschinen zur Herstellung textiler Strukturen -05020400 Maschinen zur Herstellung textiler Strukturen
FlechtmaschinenFlechtmaschinen
Machinery for Production of Textile Structures -Machinery for Production of Textile Structures
gBraiding Machines
Fill Gesellschaft m.b.H. 6/C06
05020500 Maschinen zur Herstellung textiler Strukturen -05020500 Maschinen zur Herstellung textiler Strukturen
Fibre-Placement-AnlagenFibre Placement Anlagen
Machinery for Production of Textile Structures -Machinery for Production of Textile Structures
p q pFibre-placement Equipment
Compositence GmbH 6/E16
CORIOLIS COMPOSITES SAS 4/B04
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Fill Gesellschaft m.b.H. 6/C06
KSL Keilmann Sondermaschinenbau GmbH 6/G08
LAP GmbH - Laser Applikationen 6/F46
05020600 Maschinen zur Herstellung textiler Strukturen -05020600 Maschinen zur Herstellung textiler Strukturen
Tapelaying-MaschinenTapelaying Maschinen
Machinery for Production of Textile Structures -Machinery for Production of Textile Structures
p y gTapelaying Machines
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Fill Gesellschaft m.b.H. 6/C06
Fraunhofer-Institut für Produktionstechnologie IPT 6/A02
KSL Keilmann Sondermaschinenbau GmbH 6/G08
LIBA Maschinenfabrik GmbH 6/B04
180
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors05020700 - 05040100
05020700 Maschinen zur Herstellung textiler Strukturen - g
KettenwirkmaschinenKettenwirkmaschinen
Machinery for Production of Textile Structures -Machinery for Production of Textile Structures
p gWarp Knitting Machines
LIBA Maschinenfabrik GmbH 6/B04
05020800 Maschinen zur Herstellung textiler Strukturen - 05020800 Maschinen zur Herstellung textiler Strukturen
WebmaschinenWebmaschinen
yMachinery for Production of Textile Structures - Looms
Elmatex GmbH - Electronic und Maschinen für die Industrie 4/F11
Schönherr Textilmaschinenbau GmbH 6/D06
05020900 Maschinen zur Herstellung textiler Strukturen - 05020900 Maschinen zur Herstellung textiler Strukturen
BeschichtungsmaschinenBeschichtungsmaschinen
Machinery for Production of Textile Structures -Machinery for Production of Textile Structures
gCoating machines
gyDiener electronic GmbH + Co. KG - Plasma-Surface-Technology 4/B09
Elmatex GmbH - Electronic und Maschinen für die Industrie 4/F11
FluidSystems GmbH & Co. KG 4/A37
Klieverik Heli B.V. 4/F11
Mehler Engineering + Service GmbH 6/C14
Maschinenfabrik Herbert Meyer GmbH 6/B30
Multi-Plot Europe GmbH 4/F11
Pultex Kunststofftechnikhandel GmbH 4/F35
RESPECTA Maschinenbau GmbH 6/B25
Schott & Meissner - Maschinen- und Anlagenbau GmbH 6/E09
Suchy Textilmaschinenbau GmbH 4/F11
05021000 Maschinen zur Herstellung textiler Strukturen - 05021000 Maschinen zur Herstellung textiler Strukturen
SchneidmaschinenSchneidmaschinen
Machinery for Production of Textile Structures -Machinery for Production of Textile Structures
gCutting machines
ARISTO Graphic Systeme GmbH & Co. KG 6/E08
Atom Stanz- und Schneidesysteme GmbH 6/A08
Cuttec GmbH 6/F31
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
DJK Europe GmbH 6/G41
Elmatex GmbH - Electronic und Maschinen für die Industrie 4/F11
gGUNNAR International - Weissenberger AG 6/E05
HELD SYSTEMS GmbH 4/B04
HG GRIMME SysTech GmbH 6/F29
Hoza Cutter GmbH 6/A16
KSL Keilmann Sondermaschinenbau GmbH 6/G08
KS-Präzisionstechnik GmbH & Co. KG 6/F16
KURIS Spezialmaschinen GmbH 6/G07
MAKA Systems GmbH 6/A01
Rebstock Consulting GmbH & Co.KG 6/A22
RH Schneidtechnik 4/PDA_E, 6/A16
Robuso Stahlwarenfabrik - Buntenbach & Sohn GmbH 6/G31
Scherenmanufaktur PAUL GmbH 6/A37
Schott & Meissner - Maschinen- und Anlagenbau GmbH 6/E09
Suchy Textilmaschinenbau GmbH 4/F11
topcut-bullmer GmbH 6/A12
05021100 Sonstige Maschinen zur Herstellung textiler Strukturen05021100 Sonstige Maschinen zur Herstellung textiler Strukturen
yOther Machinery for Production of Textile Structures
Cetex Institut für Textil- und - Verarbeitungsmaschinen gGmbH 4/D03
Compositence GmbH 6/E16
Fiber Engineering GmbH 4/C02
LIBA Maschinenfabrik GmbH 6/B04
Mehler Engineering + Service GmbH 6/C14
05030100 Maschinen zur Konfektion von Verstärkungstextilien -05030100 Maschinen zur Konfektion von Verstärkungstextilien
Maschinen für die ZuschnittvorbereitungMaschinen für die Zuschnittvorbereitung
Machinery for Make-up of Reinforcing Textiles -Machinery for Make up of Reinforcing Textiles
g pMachines for Cutting Preparation
Atom Stanz- und Schneidesysteme GmbH 6/A08
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Fill Gesellschaft m.b.H. 6/C06
topcut-bullmer GmbH 6/A12
05030200 Maschinen zur Konfektion von Verstärkungstextilien -05030200 Maschinen zur Konfektion von Verstärkungstextilien
Maschinen für den ZuschnittMaschinen für den Zuschnitt
Machinery for Make-up of Reinforcing Textiles -Machinery for Make up of Reinforcing Textiles
gMachines for cutting
ARISTO Graphic Systeme GmbH & Co. KG 6/E08
Atom Stanz- und Schneidesysteme GmbH 6/A08
DJK Europe GmbH 6/G41
gGUNNAR International - Weissenberger AG 6/E05
HELD SYSTEMS GmbH 4/B04
Hoza Cutter GmbH 6/A16
KS-Präzisionstechnik GmbH & Co. KG 6/F16
KURIS Spezialmaschinen GmbH 6/G07
Rebstock Consulting GmbH & Co.KG 6/A22
RH Schneidtechnik 4/PDA_E, 6/A16
Robuso Stahlwarenfabrik - Buntenbach & Sohn GmbH 6/G31
05030300 Maschinen zur Konfektion von Verstärkungstextilien -05030300 Maschinen zur Konfektion von Verstärkungstextilien
FügetechnikFügetechnik
Machinery for Make-up of Reinforcing Textiles -Machinery for Make up of Reinforcing Textiles
g gyJoining Technology
Fill Gesellschaft m.b.H. 6/C06
KSL Keilmann Sondermaschinenbau GmbH 6/G08
05030400 Sonstige Maschinen zur Konfektion von05030400 Sonstige Maschinen zur Konfektion von
VerstärkungstextilienVerstärkungstextilien
y p gOther Machinery for Make-up of Reinforcing Textiles
Rebstock Consulting GmbH & Co.KG 6/A22
Robuso Stahlwarenfabrik - Buntenbach & Sohn GmbH 6/G31
05040100 Maschinen zur Herstellung von Verbundstoffen - Extruder05040100 Maschinen zur Herstellung von Verbundstoffen Extruder
pMachines for Manufacture of Composites - Extruders
ADM-ISOBLOC GmbH - Anlagen für Dosieren und Mischen 6/D26
BREYER GmbH Maschinenfabrik 4/D36
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Nanjing Loyalty Composite Equipment Manufacture Co. Ltd. 6/A21
181
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors05040300 - 05041300
05040300 Maschinen zur Herstellung von Verbundstoffen - g
CompounderCompounder
p pMachines for Manufacture of Composites - Compounders
ADM-ISOBLOC GmbH - Anlagen für Dosieren und Mischen 6/D26
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
RESPECTA Maschinenbau GmbH 6/B25
05040400 Maschinen zur Herstellung von Verbundstoffen -05040400 Maschinen zur Herstellung von Verbundstoffen
SchäumanlagenSchäumanlagen
p yMachines for Manufacture of Composites - Foam Systems
ADM-ISOBLOC GmbH - Anlagen für Dosieren und Mischen 6/D26
CANNON DEUTSCHLAND GMBH 6/A24
CANNON SPA 6/A24
Fill Gesellschaft m.b.H. 6/C06
FluidSystems GmbH & Co. KG 4/A37
FRIMO Group GmbH 6/E11, PDA_Foyer_6
Hennecke GmbH 6/D16
intec Bielenberg GmbH & Co. KG 6/A36
Pinette Emidecau GmbH 6/C22
Pultex Kunststofftechnikhandel GmbH 4/F35
05040500 Maschinen zur Herstellung von Verbundstoffen -05040500 Maschinen zur Herstellung von Verbundstoffen
SMC (Sheet Molding Compound)SMC (Sheet Molding Compound)
Machines for Manufacture of Composites -Machines for Manufacture of Composites
g pSMC (Sheet Moulding Compounds)
CANNON DEUTSCHLAND GMBH 6/A24
CANNON SPA 6/A24
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Höfer Presstechnik GmbH 6/C16
ITALPRESSE S.p.A 6/D14
Langzauner GmbH 6/B20
Mahr Metering Systems GmbH 6/B13
ORMAMACCHINE S.p.A. 6/A30
Pinette Emidecau GmbH 6/C22
Schott & Meissner - Maschinen- und Anlagenbau GmbH 6/E09
Siempelkamp Maschinen- und Anlagenbau GmbH & Co. KG 6/B10
05040600 Maschinen zur Herstellung von Verbundstoffen -05040600 Maschinen zur Herstellung von Verbundstoffen
BMC (Bulk Moulding Compound)BMC (Bulk Moulding Compound)
Machines for Manufacture of Composites -Machines for Manufacture of Composites
g pBMC (Bulk Moulding thermoplastics)
CANNON DEUTSCHLAND GMBH 6/A24
CANNON SPA 6/A24
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Höfer Presstechnik GmbH 6/C16
ITALPRESSE S.p.A 6/D14
Langzauner GmbH 6/B20
Mahr Metering Systems GmbH 6/B13
Schott & Meissner - Maschinen- und Anlagenbau GmbH 6/E09
05040700 Maschinen zur Herstellung von Verbundstoffen -05040700 Maschinen zur Herstellung von Verbundstoffen
GMT (Glasmattenverstärkte Thermoplaste)GMT (Glasmattenverstärkte Thermoplaste)
Machines for Manufacture of Composites -Machines for Manufacture of Composites
g pGMT (glass mat reinforced thermoplastics)
CANNON DEUTSCHLAND GMBH 6/A24
CANNON SPA 6/A24
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Höfer Presstechnik GmbH 6/C16
ITALPRESSE S.p.A 6/D14
Langzauner GmbH 6/B20
Sandvik Process Systems - Division of SMT Deutschland GmbH 6/E10
Schott & Meissner - Maschinen- und Anlagenbau GmbH 6/E09
05040800 Maschinen zur Herstellung von Verbundstoffen -05040800 Maschinen zur Herstellung von Verbundstoffen
LFT (Langfaserverstärkte Thermoplaste)LFT (Langfaserverstärkte Thermoplaste)
Machines for Manufacture of Composites -Machines for Manufacture of Composites
g pLFT (long-fibre reinforced thermoplastics)
CANNON DEUTSCHLAND GMBH 6/A24
CANNON SPA 6/A24
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Höfer Presstechnik GmbH 6/C16
ITALPRESSE S.p.A 6/D14
Langzauner GmbH 6/B20
Pinette Emidecau GmbH 6/C22
RUCKS Maschinenbau GmbH 6/B26
Schott & Meissner - Maschinen- und Anlagenbau GmbH 6/E09
05040900 Maschinen zur Herstellung von Verbundstoffen -05040900 Maschinen zur Herstellung von Verbundstoffen
FolienvakuuminjektionFolienvakuuminjektion
Machines for Manufacture of Composites -Machines for Manufacture of Composites
jFilm Vacuum Injection
COLUMBUS Handelsgesellschaft m.b.H. 6/G32
Hedrich Group - Hedrich GmbH 6/A28
Hilger u. Kern GmbH 4/D30
05041000 Maschinen zur Herstellung von Verbundstoffen -05041000 Maschinen zur Herstellung von Verbundstoffen
DruckinjektionDruckinjektion
Machines for Manufacture of Composites -Machines for Manufacture of Composites
g jHigh-Pressure Injection
Hedrich Group - Hedrich GmbH 6/A28
Langzauner GmbH 6/B20
Wolfangel GmbH 4/B32
05041100 Maschinen zur Herstellung von Verbundstoffen -05041100 Maschinen zur Herstellung von Verbundstoffen
SpaltimprägnierverfahrenSpaltimprägnierverfahren
Machines for Manufacture of Composites -Machines for Manufacture of Composites
p p gGap Impregnation
BREYER GmbH Maschinenfabrik 4/D36
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Hilger u. Kern GmbH 4/D30
Langzauner GmbH 6/B20
Mahr Metering Systems GmbH 6/B13
05041200 Maschinen zur Herstellung von Verbundstoffen -05041200 Maschinen zur Herstellung von Verbundstoffen
SpritzpressenSpritzpressen
Machines for Manufacture of Composites -Machines for Manufacture of Composites
gTransfer Moulding
ITALPRESSE S.p.A 6/D14
Langzauner GmbH 6/B20
Neue Materialien Bayreuth GmbH 6/B04
ORMAMACCHINE S.p.A. 6/A30
05041300 Maschinen zur Herstellung von Verbundstoffen -05041300 Maschinen zur Herstellung von Verbundstoffen
RTM (Resin Transfer Moulding)RTM (Resin Transfer Moulding)
Machines for Manufacture of Composites -Machines for Manufacture of Composites
gRTM (Resin Transfer Moulding)
CANNON DEUTSCHLAND GMBH 6/A24
CANNON SPA 6/A24
COMPOSE 6/D23
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Euro-RTM-Group - c/o AVK e.V. 4/PDA_B
Fill Gesellschaft m.b.H. 6/C06
First COMPOSITES GmbH 6/B31
182
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors05041300 - 05042000
Hennecke GmbH 6/D16
Hilger u. Kern GmbH 4/D30
intec Bielenberg GmbH & Co. KG 6/A36
ITALPRESSE S.p.A 6/D14
gLangzauner GmbH 6/B20
Maschinenfabrik Lauffer GmbH & Co.KG 6/C23
Mahr Metering Systems GmbH 6/B13
ORMAMACCHINE S.p.A. 6/A30
RUCKS Maschinenbau GmbH 6/B26
TARTLER GmbH 6/D08
Friedrich-Schiller-Universität Jena - Physikalisch-Astronomische
Fakultät Institut für Materialwissenschaft und Werkstofftechnologie 4/C22
Wolfangel GmbH 4/B32
05041400 Maschinen zur Herstellung von Verbundstoffen - 05041400 Maschinen zur Herstellung von Verbundstoffen
Hochdruck-RTM (Resin Transfer Moulding)Hochdruck RTM (Resin Transfer Moulding)
Machines for Manufacture of Composites -Machines for Manufacture of Composites
g p gHigh-pressure RTM (Resin Transfer Moulding)
CANNON DEUTSCHLAND GMBH 6/A24
CANNON SPA 6/A24
COMPOSE 6/D23
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Euro-RTM-Group - c/o AVK e.V. 4/PDA_B
Fill Gesellschaft m.b.H. 6/C06
First COMPOSITES GmbH 6/B31
Hennecke GmbH 6/D16
ITALPRESSE S.p.A 6/D14
KraussMaffei Technologies GmbH 6/C08
Langzauner GmbH 6/B20
Maschinenfabrik Lauffer GmbH & Co.KG 6/C23
Mahr Metering Systems GmbH 6/B13
ORMAMACCHINE S.p.A. 6/A30
Pinette Emidecau GmbH 6/C22
RUCKS Maschinenbau GmbH 6/B26
05041500 Maschinen zur Herstellung von Verbundstoffen - 05041500 Maschinen zur Herstellung von Verbundstoffen
RRIM (Reinforced Reaction Injection Moulding)RRIM (Reinforced Reaction Injection Moulding)
Machines for Manufacture of Composites -Machines for Manufacture of Composites
j gRRIM (Reinforced Reaction Injection Moulding)
CANNON DEUTSCHLAND GMBH 6/A24
CANNON SPA 6/A24
Hedrich Group - Hedrich GmbH 6/A28
Hennecke GmbH 6/D16
Hilger u. Kern GmbH 4/D30
ITALPRESSE S.p.A 6/D14
KraussMaffei Technologies GmbH 6/C08
Langzauner GmbH 6/B20
Mahr Metering Systems GmbH 6/B13
TARTLER GmbH 6/D08
05041600 Maschinen zur Herstellung von Verbundstoffen - 05041600 Maschinen zur Herstellung von Verbundstoffen
S-RIM (Structural Reaction Injection Moulding)S RIM (Structural Reaction Injection Moulding)
Machines for Manufacture of Composites -Machines for Manufacture of Composites
j gS-RIM (Structural Reaction Injection Moulding)
CANNON DEUTSCHLAND GMBH 6/A24
CANNON SPA 6/A24
ITALPRESSE S.p.A 6/D14
Langzauner GmbH 6/B20
Mahr Metering Systems GmbH 6/B13
TARTLER GmbH 6/D08
05041700 Maschinen zur Herstellung von Verbundstoffen - Spritzgießen05041700 Maschinen zur Herstellung von Verbundstoffen Spritzgießen
p j gMachines for Manufacture of Composites - Injection Moulding
FRIMO Group GmbH 6/E11, PDA_Foyer_6
KraussMaffei Technologies GmbH 6/C08
05041701 Maschinen zur Herstellung von Verbundstoffen - 05041701 Maschinen zur Herstellung von Verbundstoffen
BMC (Bulk Moulding Compound)BMC (Bulk Moulding Compound)
Machines for Manufacture of Composites -Machines for Manufacture of Composites
g pBMC (Bulk Moulding Compounds)
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Mahr Metering Systems GmbH 6/B13
05041702 Maschinen zur Herstellung von Verbundstoffen - 05041702 Maschinen zur Herstellung von Verbundstoffen
Duroplast BMC (Bulk Moulding Compound)Duroplast BMC (Bulk Moulding Compound)
Machines for Manufacture of Composites -Machines for Manufacture of Composites
g g pThermosetting BMC (Bulk Moulding Compounds)
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
Maschinenfabrik Lauffer GmbH & Co.KG 6/C23
RESPECTA Maschinenbau GmbH 6/B25
05041703 Maschinen zur Herstellung von Verbundstoffen - 05041703 Maschinen zur Herstellung von Verbundstoffen
Kurzglasfaser verstärkt (SFG-IM)Kurzglasfaser verstärkt (SFG IM)
Machines for Manufacture of Composites -Machines for Manufacture of Composites
Short Glass Fibre Reinforced (SGF-IM)
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
05041704 Maschinen zur Herstellung von Verbundstoffen - 05041704 Maschinen zur Herstellung von Verbundstoffen
Langglasfaser verstärkt (LFG-IMM)Langglasfaser verstärkt (LFG IMM)
Machines for Manufacture of Composites -Machines for Manufacture of Composites
gLong Glass Fibre Reinforced (LGF-IMM)
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
05041705 Maschinen zur Herstellung von Verbundstoffen - 05041705 Maschinen zur Herstellung von Verbundstoffen
Endlosfaser verstärkt (D-LFT-IM)Endlosfaser verstärkt (D LFT IM)
Machines for Manufacture of Composites -Machines for Manufacture of Composites
Continuous Fibre Reinforced (D-LFT-IM)
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
05041900 Maschinen zur Herstellung von Verbundstoffen - 05041900 Maschinen zur Herstellung von Verbundstoffen
PultrusionsverfahrenPultrusionsverfahren
Machines for Manufacture of Composites -Machines for Manufacture of Composites
qPultrusion Techniques
Fraunhofer-Institut für Produktionstechnologie IPT 6/A02
Mahr Metering Systems GmbH 6/B13
TARTLER GmbH 6/D08
05042000 Maschinen zur Herstellung von Verbundstoffen - 05042000 Maschinen zur Herstellung von Verbundstoffen
LaminierverfahrenLaminierverfahren
Machines for Manufacture of Composites -Machines for Manufacture of Composites
qLamination Techniques
Busse Heizplattentechnik GmbH 6/C42
ELKOM Heizplattentechnik GmbH 6/E44
Fill Gesellschaft m.b.H. 6/C06
ITALPRESSE S.p.A 6/D14
Gottfried Joos Maschinenfabrik GmbH & Co. KG 6/F45
Klieverik Heli B.V. 4/F11
Maschinenfabrik Lauffer GmbH & Co.KG 6/C23
Mahr Metering Systems GmbH 6/B13
Maschinenfabrik Herbert Meyer GmbH 6/B30
Sandvik Process Systems - Division of SMT Deutschland GmbH 6/E10
Schott & Meissner - Maschinen- und Anlagenbau GmbH 6/E09
Suchy Textilmaschinenbau GmbH 4/F11
Wolfangel GmbH 4/B32
183
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors05042100 - 05050400
g
FormpressenFormpressen
Machines for Manufacture of Composites -Machines for Manufacture of Composites
p gCompression Moulding
Busse Heizplattentechnik GmbH 6/C42
CANNON DEUTSCHLAND GMBH 6/A24
CANNON SPA 6/A24
ELKOM Heizplattentechnik GmbH 6/E44
Fill Gesellschaft m.b.H. 6/C06
FRIMO Group GmbH 6/E11, PDA_Foyer_6
Höfer Presstechnik GmbH 6/C16
ITALPRESSE S.p.A 6/D14
Gottfried Joos Maschinenfabrik GmbH & Co. KG 6/F45
Maschinenfabrik Lauffer GmbH & Co.KG 6/C23
Maschinenfabrik Herbert Meyer GmbH 6/B30
ORMAMACCHINE S.p.A. 6/A30
Pinette Emidecau GmbH 6/C22
R+S Technik GmbH 6/B28
RUCKS Maschinenbau GmbH 6/B26
Siempelkamp Maschinen- und Anlagenbau GmbH & Co. KG 6/B10
05042200 Maschinen zur Herstellung von Verbundstoffen - 05042200 Maschinen zur Herstellung von Verbundstoffen
Kontinuierliche PressenKontinuierliche Pressen
Machines for Manufacture of Composites -Machines for Manufacture of Composites
gContinuous Moulding
CANNON DEUTSCHLAND GMBH 6/A24
CANNON SPA 6/A24
ITALPRESSE S.p.A 6/D14
Gottfried Joos Maschinenfabrik GmbH & Co. KG 6/F45
Maschinenfabrik Herbert Meyer GmbH 6/B30
Sandvik Process Systems - Division of SMT Deutschland GmbH 6/E10
gSchott & Meissner - Maschinen- und Anlagenbau GmbH 6/E09
05042300 Maschinen zur Herstellung von Verbundstoffen - 05042300 Maschinen zur Herstellung von Verbundstoffen
Thermoformmaschinen (Organobleche)Thermoformmaschinen (Organobleche)
Machines for Manufacture of Composites -Machines for Manufacture of Composites
gThermoform Machines (Organic Sheets)
Busse Heizplattentechnik GmbH 6/C42
CANNON DEUTSCHLAND GMBH 6/A24
CANNON SPA 6/A24
ELKOM Heizplattentechnik GmbH 6/E44
Exact Plastics GmbH 6/F24
Fill Gesellschaft m.b.H. 6/C06
Fraunhofer-Institut für Produktionstechnologie IPT 6/A02
FRIMO Group GmbH 6/E11, PDA_Foyer_6
Gaugler & Lutz oHG 6/A04
GEISS AG 6/A03
IBT.InfraBioTech GmbH 6/G05
Gottfried Joos Maschinenfabrik GmbH & Co. KG 6/F45
Maschinenfabrik Lauffer GmbH & Co.KG 6/C23
Mehler Engineering + Service GmbH 6/C14
Maschinenfabrik Herbert Meyer GmbH 6/B30
RUCKS Maschinenbau GmbH 6/B26
Siempelkamp Maschinen- und Anlagenbau GmbH & Co. KG 6/B10
05042600 Maschinen zur Herstellung von Verbundstoffen - Autoklaven 05042600 Maschinen zur Herstellung von Verbundstoffen Autoklaven
pMachines for Manufacture of Composites - Autoclaves
ASC Process Systems 6/B14
Maroso srl 6/C03
Panini S.R.L. 6/C01
Terruzzi Fercalx S.P.A 6/E01
05042700 Sonstige Maschinen zur Herstellung von Verbundstoffen 05042700 Sonstige Maschinen zur Herstellung von Verbundstoffen
y pOther Machinery for Manufacture of Composites
ADM-ISOBLOC GmbH - Anlagen für Dosieren und Mischen 6/D26
ASC Process Systems 6/B14
Beinlich Pumpen GmbH 6/B12
BÜFA Composites GmbH & Co KG 4/D38, 4/PDA_F
Busse Heizplattentechnik GmbH 6/C42
CANNON SPA 6/A24
CMS Deutschland GmbH 6/A11
DBK David + Baader GmbH 6/G03
ELKOM Heizplattentechnik GmbH 6/E44
FRIMO Group GmbH 6/E11, PDA_Foyer_6
Heidelberger Druckmaschinen AG 4/C02
Hilger u. Kern GmbH 4/D30
Holland Composites Pavilion 4/A32 - 4/B37
Klieverik Heli B.V. 4/F11
LAP GmbH - Laser Applikationen 6/F46
Nabertherm GmbH 4/A21
Schott & Meissner - Maschinen- und Anlagenbau GmbH 6/E09
Schüchl Maschinenbau 4/A31
Siempelkamp Maschinen- und Anlagenbau GmbH & Co. KG 6/B10
Smart Tooling 6/G39b
Terruzzi Fercalx S.P.A 6/E01
WeightWorks Engineering - F. Dietze 6/G23
Wolfangel GmbH 4/B32
05050100 Maschinen zur Materialvorbereitung - Materialzuführ-05050100 Maschinen zur Materialvorbereitung Materialzuführ
und -dosiersystemeund dosiersysteme
Machines for Material Preparation - Material Feed andMachines for Material Preparation Material Feed and
g yMetering Systems
Beinlich Pumpen GmbH 6/B12
CANNON DEUTSCHLAND GMBH 6/A24
FluidSystems GmbH & Co. KG 4/A37
intec Bielenberg GmbH & Co. KG 6/A36
KauPo Plankenhorn e.K. 4/B40
KURIS Spezialmaschinen GmbH 6/G07
RESPECTA Maschinenbau GmbH 6/B25
Schüchl Maschinenbau 4/A31
TARTLER GmbH 6/D08
Wolfangel GmbH 4/B32
05050200 Maschinen zur Materialvorbereitung - Mischer05050200 Maschinen zur Materialvorbereitung Mischer
pMachines for Material Preparation - Mixers
ADM-ISOBLOC GmbH - Anlagen für Dosieren und Mischen 6/D26
RESPECTA Maschinenbau GmbH 6/B25
Schüchl Maschinenbau 4/A31
05050300 Maschinen zur Materialvorbereitung - Trockner05050300 Maschinen zur Materialvorbereitung Trockner
pMachines for Material Preparation - Driers
DBK David + Baader GmbH 6/G03
IBT.InfraBioTech GmbH 6/G05
Linn High Therm GmbH 6/G36
Mehler Engineering + Service GmbH 6/C14
Nabertherm GmbH 4/A21
05050400 Sonstige Maschinen zur Materialvorbereitung05050400 Sonstige Maschinen zur Materialvorbereitung
pOther Machines for Material Preparation
intec Bielenberg GmbH & Co. KG 6/A36
Linn High Therm GmbH 6/G36
Nabertherm GmbH 4/A21
Siempelkamp Maschinen- und Anlagenbau GmbH & Co. KG 6/B10
184
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors05060100 - 05070501
05060100 Maschinen zum Bearbeiten von Verbundstoffen - 05060100 Maschinen zum Bearbeiten von Verbundstoffen
Schneid- und SpaltmaschinenSchneid und Spaltmaschinen
Machines for Processing Composites -Machines for Processing Composites
g p gCutting and Splitting Machines
ARISTO Graphic Systeme GmbH & Co. KG 6/E08
CMS Deutschland GmbH 6/A11
DEKUMED Kunststoff- und Maschinenvertrieb GmbH & Co. KG 6/C38
Dieffenbacher GmbH - Maschinen- und Anlagenbau 6/C10
DJK Europe GmbH 6/G41
EM-Systeme GmbH 6/A16
FRIMO Group GmbH 6/E11, PDA_Foyer_6
gGUNNAR International - Weissenberger AG 6/E05
HG GRIMME SysTech GmbH 6/F29
Hoza Cutter GmbH 6/A16
KURIS Spezialmaschinen GmbH 6/G07
Rebstock Consulting GmbH & Co.KG 6/A22
RH Schneidtechnik 4/PDA_E, 6/A16
topcut-bullmer GmbH 6/A12
05060200 Maschinen zum Bearbeiten von Verbundstoffen - 05060200 Maschinen zum Bearbeiten von Verbundstoffen
Maschinen zur OberflächenbearbeitungMaschinen zur Oberflächenbearbeitung
Machines for Processing Composites -Machines for Processing Composites
Machines for Surface Treatment
CMS Deutschland GmbH 6/A11
DEKUMED Kunststoff- und Maschinenvertrieb GmbH & Co. KG 6/C38
gyDiener electronic GmbH + Co. KG - Plasma-Surface-Technology 4/B09
FluidSystems GmbH & Co. KG 4/A37
IBT.InfraBioTech GmbH 6/G05
Nabertherm GmbH 4/A21
PADE - CNC 6/C11
Reichenbacher HAMUEL GmbH 6/G09
SAT 6/E48
topcut-bullmer GmbH 6/A12
05060300 Sonstige Maschinen zum Bearbeiten von Verbundstoffen 05060300 Sonstige Maschinen zum Bearbeiten von Verbundstoffen
g pOther Machines for Processing Composites
ARISTO Graphic Systeme GmbH & Co. KG 6/E08
Beinlich Pumpen GmbH 6/B12
BELOTTI SPA 6/E32
CMS Deutschland GmbH 6/A11
DEKUMED Kunststoff- und Maschinenvertrieb GmbH & Co. KG 6/C38
FRIMO Group GmbH 6/E11, PDA_Foyer_5
GEISS AG 6/A03
HG GRIMME SysTech GmbH 6/F29
yMAKA Systems GmbH 6/A01
McClean Anderson 6/G39e
MICADO SMART ENGINEERING GmbH 6/D34
Nabertherm GmbH 4/A21
PADE - CNC 6/C11
Reichenbacher HAMUEL GmbH
6/G09
Scherenmanufaktur PAUL GmbH 6/A37
Wissner Gesellschaft für Maschinenbau mbH 6/B43
05070100 Werkzeug- / Formenbau - geschlossene Imprägnierformen05070100 Werkzeug / Formenbau geschlossene Imprägnierformen
g p gTool and Mould Making - Closed Impregnation Moulds
COMPOSE 6/D23
FRIMO Group GmbH 6/E11, PDA_Foyer_6
KraussMaffei Technologies GmbH 6/C08
05070200 Werkzeug- / Formenbau - einteilige Werkzeugformen05070200 Werkzeug / Formenbau einteilige Werkzeugformen
g pTool and Mould Making - One-piece Tool Moulds
Busse Heizplattentechnik GmbH 6/C42
c2i s.r.o. 4/A10
COMPOSE 6/D23
DG Flugzeugbau GmbH 4/F04
DUTHEL MAINTENANCE MOULES 4/D20e
ELKOM Heizplattentechnik GmbH 6/E44
FRIMO Group GmbH 6/E11, PDA_Foyer_6
GEISS AG 6/A03
KEGELMANN TECHNIK GmbH 4/A14
PADE - CNC 6/C11
Smart Tooling 6/G39b
Weber Manufacturing Technologies Inc. 6/A09
WeightWorks Engineering - F. Dietze 6/G23
05070300 Werkzeug- / Formenbau - Faserwickelkerne05070300 Werkzeug / Formenbau Faserwickelkerne
gTool and Mould Making - Mandrels
Smart Tooling 6/G39b
Weber Manufacturing Technologies Inc. 6/A09
05070500 Werkzeug- / Formenbau - Presswerkzeuge05070500 Werkzeug / Formenbau Presswerkzeuge
gTool and Mould Making - Extrusion Dies
FRIMO Group GmbH 6/E11, PDA_Foyer_6
GEISS AG 6/A03
ITALPRESSE S.p.A 6/D14
KEGELMANN TECHNIK GmbH 4/A14
R+S Technik GmbH 6/B28
Schneider Form GmbH - Kunststoff- und Druckgussformen 6/E06
05070501 Werkzeug- / Formenbau - Hochdruck05070501 Werkzeug / Formenbau Hochdruck
g g pTool and Mould Making - High pressure
DUTHEL MAINTENANCE MOULES 4/D20e
FRIMO Group GmbH 6/E11, PDA_Foyer_6
KEGELMANN TECHNIK GmbH 4/A14
Weber Manufacturing Technologies Inc. 6/A09
185
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors05070502 - 05090200
05070502 Werkzeug- / Formenbau - Niederdruck 05070502 Werkzeug / Formenbau Niederdruck
g pTool and Mould Making - Low pressure
DUTHEL MAINTENANCE MOULES 4/D20e
FRIMO Group GmbH 6/E11, PDA_Foyer_6
KEGELMANN TECHNIK GmbH 4/A14
Weber Manufacturing Technologies Inc. 6/A09
05070600 Werkzeug- / Formenbau - Composite Werkzeuge 05070600 Werkzeug / Formenbau Composite Werkzeuge
g pTool and Mould Making - Composite Tools
Acrosoma NV - Structural Composite Technologie 4/F29
c2i s.r.o. 4/A10
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
Cytec 4/B21
DG Flugzeugbau GmbH 4/F04
ebalta Kunststoff GmbH 4/A18
A. Erglis GmbH 6/D04
fibretech composites GmbH 6/B23
Fill Gesellschaft m.b.H. 6/C06
FRIMO Group GmbH 6/E11, PDA_Foyer_6
GEISS AG 6/A03
Germa Composite GmbH 6/C40
Grasse Zur Ingenieurgesellschaft mbH 6/G17
GUHDO GmbH 6/B37
Alfred Härer GmbH, Werkzeug-und Formenbau - Haero Carbon GmbH 6/G04
Hufschmied Zerspanungssysteme GmbH 6/E40
MAPAL Präzisionswerkzeuge Dr. Kress KG 6/B43
Münch Chemie International GmbH 4/B24
Schneider Form GmbH - Kunststoff- und Druckgussformen 6/E06
Smart Tooling 6/G39b
Friedrich-Schiller-Universität Jena - Physikalisch-Astronomische
Fakultät Institut für Materialwissenschaft und Werkstofftechnologie 4/C22
WeightWorks Engineering - F. Dietze 6/G23
05070700 Werkzeug- / Formenbau - Metall-Werkzeuge 05070700 Werkzeug / Formenbau Metall Werkzeuge
gTool and Mould Making - Metal Tools
COMPOSE 6/D23
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
DUTHEL MAINTENANCE MOULES 4/D20e
Germa Composite GmbH 6/C40
MAPAL Präzisionswerkzeuge Dr. Kress KG 6/B43
Weber Manufacturing Technologies Inc. 6/A09
05070800 Werkzeug- / Formenbau - Diamant-Werkzeuge 05070800 Werkzeug / Formenbau Diamant Werkzeuge
gTool and Mould Making - Diamond Tools
GUHDO GmbH 6/B37
MAPAL Präzisionswerkzeuge Dr. Kress KG 6/B43
Moritz Diamantwerkzeugherstellung OHG 6/E39
05070900 Werkzeug- / Formenbau - Zerspanungs-Werkzeuge05070900 Werkzeug / Formenbau Zerspanungs Werkzeuge
g gTool and Mould Making - Machining Tools
GUHDO GmbH 6/B37
MAPAL Präzisionswerkzeuge Dr. Kress KG 6/B43
05071000 Sonstiges Werkzeug- / Formenbau05071000 Sonstiges Werkzeug / Formenbau
gOther Tool and Mould Making
DUTHEL MAINTENANCE MOULES 4/D20e
FRIMO Group GmbH 6/E11, PDA_Foyer_6
GUHDO GmbH 6/B37
Hufschmied Zerspanungssysteme GmbH 6/E40
MAKA Systems GmbH 6/A01
MICADO SMART ENGINEERING GmbH 6/D34
NECUMER GmbH 4/F19
RH Schneidtechnik 4/PDA_E, 6/A16
Schüchl Maschinenbau 4/A31
Smart Tooling 6/G39b
Stäubli Tec-Systems GmbH - Connectors 6/D06
WeightWorks Engineering - F. Dietze 6/G23
05080100 Handhabungstechnik - Roboter05080100 Handhabungstechnik Roboter
gHandling - Robots
ASS Maschinenbau GmbH 6/G06
HG GRIMME SysTech GmbH 6/F29
Karlsruher Institut für Technologie (KIT) -
Karlsruhe Institute of Technology (KIT) 6/G37
05080200 andere Handhabungseinrichtungen05080200 andere Handhabungseinrichtungen
g q pOther Handling Equipment
ASS Maschinenbau GmbH 6/G06
Beinlich Pumpen GmbH 6/B12
Fraunhofer-Institut für Produktionstechnologie IPT 6/A02
FRIMO Group GmbH 6/E11, PDA_Foyer_6
Heidelberger Druckmaschinen AG 4/C02
LAP GmbH - Laser Applikationen 6/F46
MICADO SMART ENGINEERING GmbH 6/D34
Stäubli Tec-Systems GmbH - Connectors 6/D06
topcut-bullmer GmbH 6/A12
05080300 Handhabungstechnik - Einrichtungen zum Verketten05080300 Handhabungstechnik Einrichtungen zum Verketten
und Transportierenund Transportieren
g g p gHandling - Linking and Transporting Devices
ASS Maschinenbau GmbH 6/G06
Fill Gesellschaft m.b.H. 6/C06
FRIMO Group GmbH 6/E11, PDA_Foyer_6
Heidelberger Druckmaschinen AG 4/C02
MICADO SMART ENGINEERING GmbH 6/D34
05090100 Ablufttechnik - Abluftreinigung VOC05090100 Ablufttechnik Abluftreinigung VOC
yExhaust Air Systems - Exhaust Air Purification VOC
RUWAC Industriesauger GmbH 6/B19
05090200 Ablufttechnik - Absauganlagen / Staubsaugertechnik05090200 Ablufttechnik Absauganlagen / Staubsaugertechnik
Exhaust Air Systems -Exhaust Air Systems
q p g yExhaust Air Equipment / Vacuum Cleaning Systems
ERBO GmbH 6/B27
186
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors05090200 - 05120200
6/B19
05100100 Mess- und Prüftechnik - Zerstörungsfreies Prüfen 05100100 Mess und Prüftechnik Zerstörungsfreies Prüfen
g g gy gMeasuring and Testing Technology - Non-destructive Testing
BST ProControl GmbH 4/F11
Dantec Dynamics GmbH 4/C02
DYNA-MESS Prüfsysteme GmbH 6/F43
edevis GmbH 6/E18
ELOVIS GmbH - Längen- und Geschwindigkeitsmesstechnik 4/F11
EVS - ELBIT VISION SYSTEMS LTD. 4/F11
Fill Gesellschaft m.b.H. 6/C06
Fraunhofer Entwicklungszentrum Röntgentechnik - EZRT 4/B04
Fraunhofer-Institut für Zerstörungsfreie Prüfverfahren - IZFP 6/A02
GMA Werkstoffprüfung GmbH 4/C13
iNDTact GmbH 6/F23
KRÜSS GmbH Wissenschaftliche Laborgeräte 4/E26
Pinette Emidecau GmbH 6/C22
05100200 Mess- und Prüftechnik - Messgeräte Oberflächenstruktur 05100200 Mess und Prüftechnik Messgeräte Oberflächenstruktur
Measuring and Testing Technology -Measuring and Testing Technology
gMeasuring Instruments - Surface Structure
Arcotec GmbH 6/G29
05100300 Mess- und Prüftechnik - Messgeräte Maßhaltigkeit 05100300 Mess und Prüftechnik Messgeräte Maßhaltigkeit
Measuring and Testing Technology -Measuring and Testing Technology
g yMeasuring Instruments - Dimensional Accuracy
BST ProControl GmbH 4/F11
ELOVIS GmbH - Längen- und Geschwindigkeitsmesstechnik 4/F11
05100400 Mess- und Prüftechnik - Messgeräte Werkstoffeigenschaften 05100400 Mess und Prüftechnik Messgeräte Werkstoffeigenschaften
Measuring and Testing Technology -Measuring and Testing Technology
g pMeasuring Instruments - Material Properties
Fraunhofer Entwicklungszentrum Röntgentechnik - EZRT 4/B04
NETZSCH-Gerätebau GmbH 6/B17
Shimadzu Europa GmbH 6/G27
05100401 Mess- und Prüftechnik - mechanisch 05100401 Mess und Prüftechnik mechanisch
g g gyMeasuring and Testing Technology - Mechanical
Grasse Zur Ingenieurgesellschaft mbH 6/G17
NETZSCH-Gerätebau GmbH 6/B17
05100402 Mess- und Prüftechnik - thermisch 05100402 Mess und Prüftechnik thermisch
g g gyMeasuring and Testing Technology - Thermal
NETZSCH-Gerätebau GmbH 6/B17
Optris GmbH 6/F47
05100403 Mess- und Prüftechnik - chemisch 05100403 Mess und Prüftechnik chemisch
g g gyMeasuring and Testing Technology - Chemical
NETZSCH-Gerätebau GmbH 6/B17
05100404 Sonstige Messgeräte Werkstoffeigenschaften05100404 Sonstige Messgeräte Werkstoffeigenschaften
g pOther Measuring Instruments – Material Properties
KRÜSS GmbH Wissenschaftliche Laborgeräte 4/E26
NETZSCH-Gerätebau GmbH 6/B17
05100500 Mess- und Prüftechnik - Bildverarbeitung und Optosensorik05100500 Mess und Prüftechnik Bildverarbeitung und Optosensorik
Measuring and Testing Technology -Measuring and Testing Technology
g g pImage Processing and Optical Sensors
BST ProControl GmbH 4/F11
Elmatex GmbH - Electronic und Maschinen für die Industrie 4/F11
Fill Gesellschaft m.b.H. 6/C06
Fraunhofer Institut für Techno- und Wirtschaftsmathematik ITWM 6/A02
Fraunhofer-Institut für Zerstörungsfreie Prüfverfahren - IZFP 6/A02
Optris GmbH 6/F47
Shimadzu Europa GmbH 6/G27
05100600 Sonstige Mess- und Prüftechnik05100600 Sonstige Mess und Prüftechnik
g g gyOther Measuring and Testing Technology
Beinlich Pumpen GmbH 6/B12
ELOVIS GmbH - Längen- und Geschwindigkeitsmesstechnik 4/F11
GMA Werkstoffprüfung GmbH 4/C13
Hengstmann Solutions GmbH 6/F21
LAP GmbH - Laser Applikationen 6/F46
Optris GmbH 6/F47
Shimadzu Europa GmbH 6/G27
VSE Volumentechnik GmbH 6/B12
05110000 Maschinen zum Recycling05110000 Maschinen zum Recycling
y gMachines for Recycling
ITALPRESSE S.p.A 6/D14
Linn High Therm GmbH 6/G36
05120100 Verbrauchsmaterialien - Vakuumsack05120100 Verbrauchsmaterialien Vakuumsack
gg gConsumables - Vacuum Bagging etc.
Airtech Europe Sarl 4/C21
COLUMBUS Handelsgesellschaft m.b.H. 6/G32
Cytec 4/B21
ebalta Kunststoff GmbH 4/A18
Esterlössl GmbH 4/A02
Flugzeug-Union Süd GmbH - EADS Deutschland 4/B12
Gößl & Pfaff GmbH 4/A11
Premier Hose Technologies Ltd. 4/A15
Vaber Industriale SPA 6/C03
W. Piekenbrink GmbH 4/D25
05120200 Verbrauchsmaterialien - Trennmittel05120200 Verbrauchsmaterialien Trennmittel
gConsumables - Mould Release Agents
Airtech Europe Sarl 4/C21
altropol Kunststoff GmbH 4/B29
ebalta Kunststoff GmbH 4/A18
FARRL GmbH 4/F41
Flugzeug-Union Süd GmbH - EADS Deutschland 4/B12
187
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors05120200 - 06040000
HP-Textiles GmbH 6/E24, PDA_Foyer_1
Jost Chemicals GmbH 4/E30
Münch Chemie International GmbH 4/B24
Vaber Industriale SPA 6/C03
WELA Handelsgesellschaft mbH 4/A28
05120300 Verbrauchsmaterialien - Sicherheitsartikel 05120300 Verbrauchsmaterialien Sicherheitsartikel
yConsumables - Safety Products
Flugzeug-Union Süd GmbH - EADS Deutschland 4/B12
05120400 Verbrauchsmaterialien - Klebstoffe 05120400 Verbrauchsmaterialien Klebstoffe
Consumables - Adhesives
Flugzeug-Union Süd GmbH - EADS Deutschland 4/B12
Gößl & Pfaff GmbH 4/A11
Permabond Engineering Adhesives LTD 4/A25
Weiss Chemie + Technik GmbH & Co. KG 4/A16
05120500 Sonstige Verbrauchsmaterialien 05120500 Sonstige Verbrauchsmaterialien
Other Consumable Materials
DD-Compound UG 6/E14
Flugzeug-Union Süd GmbH - EADS Deutschland 4/B12
KauPo Plankenhorn e.K. 4/B40
Premier Hose Technologies Ltd. 4/A15
06000000 Hersteller von Produkten
Manufacturer of Products
06010000 Platten 06010000 Platten
Panels
3A Composites GmbH 4/B43
3D-CORE - Extended Structured Composites GmbH & Co.KG 4/A06
CG TEC GmbH Carbon- & Glasfasertechnik 6/B04
CORATEC AG - Verbundelemente Technologie 6/B34
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
DELIGNIT - BLOMBERGER HOLZINDUSTRIE B. HAUSMANN GMBH & CO. KG 6/C17
DURAtec AG 6/B24
Grasse Zur Ingenieurgesellschaft mbH 6/G17
HUBER+SUHNER AG - Business Unit Composites 6/E30
KREMPEL GmbH 4/D10
NECUMER GmbH 4/F19
OBO-Werke GmbH & Co. KG 6/E36
Paul Bauder GmbH & Co. KG 4/B42
RAMPF Tooling GmbH & Co. KG 4/A12
Secar Technologie GmbH 4/F09
SWAP (Sachsen) GmbH - Verbundwerkstoffe 4/E17
Toho Tenax Europe GmbH 4/C12
Weiss Chemie + Technik GmbH & Co. KG 4/A16
Wihag Composites GmbH & Co. KG 4/F07
06020000 Sandwichplatten 06020000 Sandwichplatten
Sandwich Panels
3A Composites GmbH 4/B43
3D-CORE - Extended Structured Composites GmbH & Co.KG 4/A06
CEL Components S.r.l. 6/E04
CORATEC AG - Verbundelemente Technologie 6/B34
DELIGNIT - BLOMBERGER HOLZINDUSTRIE B. HAUSMANN GMBH & CO. KG 6/C17
DIAB GmbH 4/F25
EURO-COMPOSITES S.A. 6/D32
Evonik Industries AG 4/B16
KREMPEL GmbH 4/D10
OBO-Werke GmbH & Co. KG 6/E36
Quadrant Plastic Composites AG 6/B22
Secar Technologie GmbH 4/F09
ThermHex Waben GmbH 6/E38
Weiss Chemie + Technik GmbH & Co. KG 4/A16
WELA Handelsgesellschaft mbH 4/A28
Wihag Composites GmbH & Co. KG 4/F07
06030000 Rohre 06030000 Rohre
Tubes
CG TEC GmbH Carbon- & Glasfasertechnik 6/B04
DURAtec AG 6/B24
Exel Composites Plc 6/A32
HUBER+SUHNER AG - Business Unit Composites 6/E30
KREMPEL GmbH 4/D10
LIANYUNGANG TIANHONG TUBES INDUSTRY Co., Ltd. 6/B36f
Plasticon France SA 4/D20d
Secar Technologie GmbH 4/F09
superTEX composites GmbH 6/D37
06040000 Profile 06040000 Profile
Profiles
BIJL Profielen BV 4/A32
DURAtec AG 6/B24
Dutch Thermoplastic Components 4/A38
EPTA European Pultrusion Technology Association - c/o AVK e.V. 4/F43
Exel Composites Plc 6/A32
Gustav Gerster GmbH & Co. KG - Geschäftsbereich Gerster TechTex 4/D05
HUBER+SUHNER AG - Business Unit Composites 6/E30
Jiangsu Jiuding New Material Co Ltd. 6/B36h
Karl Mayer Textilmaschinenfabrik GmbH 4/B04
KREMPEL GmbH 4/D10
Munich Composites GmbH 4/D02
Secar Technologie GmbH 4/F09
188
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors06050000 - 07010000
06050000 Behälter 06050000 Behälter
Containers
Maag Technic GmbH 4/B05
Zaklady Laminatów Poliestrowych TROKOTEX Sp. z.o.o. 4/F18
06060100 Formteile - Prototypen 06060100 Formteile Prototypen
ypMoulded Parts - Prototypes
2R-Tec GmbH & Co. KG 6/F17
3D-CORE - Extended Structured Composites GmbH & Co.KG 4/A06
all ahead composites GmbH - bike ahead composites 6/G04
Carbolight GbR 4/D40b
Compositech Srl 4/C04
COMPOSYST GmbH 4/B12
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
EURO-COMPOSITES S.A. 6/D32
Evonik Industries AG 4/B16
Fiber Engineering GmbH 4/C02
Alfred Härer GmbH, Werkzeug-und Formenbau - Haero Carbon GmbH 6/G04
HUBER+SUHNER AG - Business Unit Composites 6/E30
KEGELMANN TECHNIK GmbH 4/A14
KREMPEL GmbH 4/D10
Maag Technic GmbH 4/B05
Nief Plastic Group 4/B07
NOVACOM - Verstärkte Kunststoffe GmbH 4/D40d
Paul Bauder GmbH & Co. KG 4/B42
Peak Technology GmbH 4/B04
RAMPF Tooling GmbH & Co. KG 4/A12
Schaumform GmbH 6/B16
Secar Technologie GmbH 4/F09
TAMSEN MARITIM GmbH 4/F24
ZCK Zuschnittcenter u. Faserverbundtechnik Gmbh & Co. KG 6/B04
06060200 Formteile - Serienherstellung 06060200 Formteile Serienherstellung
Moulded Parts - Series Production
2R-Tec GmbH & Co. KG 6/F17
all ahead composites GmbH - bike ahead composites 6/G04
Cato Composite Innovations BV - PO Box 26 6/D12
Compositech Srl 4/C04
COMPOSYST GmbH 4/B12
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
DG Flugzeugbau GmbH 4/F04
DURAtec AG 6/B24
p pDutch Thermoplastic Components 4/A38
EURO-COMPOSITES S.A. 6/D32
Fiber Engineering GmbH 4/C02
Alfred Härer GmbH, Werkzeug-und Formenbau - Haero Carbon GmbH 6/G04
Heidelberger Druckmaschinen AG 4/C02
HUBER+SUHNER AG - Business Unit Composites 6/E30
Karl Mayer Textilmaschinenfabrik GmbH 4/B04
Maag Technic GmbH 4/B05
Nief Plastic Group 4/B07
NOVACOM - Verstärkte Kunststoffe GmbH 4/D40d
Secar Technologie GmbH 4/F09
TAMSEN MARITIM GmbH 4/F24
06070000 Sonstige Hersteller von Produkten06070000 Sonstige Hersteller von Produkten
Other Manufacturer of Products
JETCAM 6/F27
Lantor B.V. 4/D40g
Premier Hose Technologies Ltd. 4/A15
Scherenmanufaktur PAUL GmbH 6/A37
06080000 Kontinuierliche Plattenfertigung06080000 Kontinuierliche Plattenfertigung
p pContinuous plate production
3A Composites GmbH 4/B43
ThermHex Waben GmbH 6/E38
Wihag Composites GmbH & Co. KG 4/F07
07000000 Verbundwerkstoffprodukte
Composite Products
07010000 Glasfaserverstärkter Kunststoff (GFK)07010000 Glasfaserverstärkter Kunststoff (GFK)
Glass Fibre Reinforced Plastics
ADETE - Advanced Engineering & Technologies GmbH 6/D38
BASF SE 4/B26
CFK-Valley Stade e.V. 4/D40f
CG TEC GmbH Carbon- & Glasfasertechnik 6/B04
COMPOSYST GmbH 4/B12
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
Cytec 4/B21
Emil Frei GmbH & Co. KG 4/D26
EURO-COMPOSITES S.A. 6/D32
Europea D.o.o. 4/E32
Exel Composites Plc 6/A32
Fill Gesellschaft m.b.H. 6/C06
Fraunhofer Institut für Chemische Technologie (ICT) 6/A02
HUBER+SUHNER AG - Business Unit Composites 6/E30
IFC Composite GmbH 6/D28
Jiangsu Jiuding New Material Co Ltd. 6/B36h
Keim Kunststofftechnik GmbH 6/A10
KREMPEL GmbH 4/D10
LAMILUX Composites GmbH 6/B04
Lange+Ritter GmbH - Faserverstärkte Kunststoffe 4/D29
Maag Technic GmbH 4/B05
Telateks A.S. - Office Hamburg - METYX Composites 6/C24
Neue Materialien Bayreuth GmbH 6/B04
Nief Plastic Group 4/B07
PFT Profiles BV 4/A34
PLASTIC GLASS S.r.l. 6/D01
Plasticon France SA 4/D20d
SAERTEX GmbH & Co. KG 6/A06
SKM GmbH - Schwergewebe Konfektion Moers GmbH 4/F03
superTEX composites GmbH 6/D37
TAMSEN MARITIM GmbH 4/F24
Wihag Composites GmbH & Co. KG 4/F07
Kunststoffverarbeitung Wimmer GmbH 6/D04
W. Piekenbrink GmbH 4/D25
Zaklady Laminatów Poliestrowych TROKOTEX Sp. z.o.o. 4/F18
189
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors07020000 - 08010000
07020000 Kohlenstofffaserverstärkter Kunststoff (CFK) 07020000 Kohlenstofffaserverstärkter Kunststoff (CFK)
Carbon Fibre Reinforced Plastics
ACC Technologies GmbH & Co. KG 4/C02
ADETE - Advanced Engineering & Technologies GmbH 6/D38
BASF SE 4/B26
CFK-Valley Stade e.V. 4/D40f
CG TEC GmbH Carbon- & Glasfasertechnik 6/B04
COMPOSYST GmbH 4/B12
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
Cytec 4/B21
EURO-COMPOSITES S.A. 6/D32
Exel Composites Plc 6/A32
Fill Gesellschaft m.b.H. 6/C06
First COMPOSITES GmbH 6/B31
Fraunhofer Institut für Chemische Technologie (ICT) 6/A02
Alfred Härer GmbH, Werkzeug-und Formenbau - Haero Carbon GmbH 6/G04
IFC Composite GmbH 6/D28
Karl Mayer Textilmaschinenfabrik GmbH 4/B04
Keim Kunststofftechnik GmbH 6/A10
KREMPEL GmbH 4/D10
LAMILUX Composites GmbH 6/B04
Lange+Ritter GmbH - Faserverstärkte Kunststoffe 4/D29
Telateks A.S. - Office Hamburg - METYX Composites 6/C24
Nanjing Loyalty Composite Equipment Manufacture Co. Ltd. 6/A21
Neue Materialien Bayreuth GmbH 6/B04
Nief Plastic Group 4/B07
Peak Technology GmbH 4/B04
PFT Profiles BV 4/A34
Plasticon France SA 4/D20d
SAERTEX GmbH & Co. KG 6/A06
SGL TECHNOLOGIES GmbH 4/F01
superTEX composites GmbH 6/D37
TAMSEN MARITIM GmbH 4/F24
TK Industries GmbH 6/B04
Toho Tenax Europe GmbH 4/C12
Universität Rostock - Lehrstuhl Konstruktionstechnik/ Leichtbau 4/C22
Kunststoffverarbeitung Wimmer GmbH 6/D04
W. Piekenbrink GmbH 4/D25
07030000 Aramidfaserverstärkter Kunststoff (AFK) 07030000 Aramidfaserverstärkter Kunststoff (AFK)
Aramid Fibre Reinforced Plastics
Aramicore Composite Co., LTD. 6/B36g
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
fibretech composites GmbH 6/B23
Telateks A.S. - Office Hamburg - METYX Composites 6/C24
PFT Profiles BV 4/A34
SAERTEX GmbH & Co. KG 6/A06
07040000 Naturfaserverstärkter Kunststoff (NFK) 07040000 Naturfaserverstärkter Kunststoff (NFK)
Natural Fibre Reinforced Plastics
Advanced Compounding Rudolstadt GmbH 6/G25
Bcomp Ltd. 4/D05
Forum Technologie und Wirtschaft e.V. - BasaltFaserNetzwerk 4/D03
Fraunhofer Institut für Chemische Technologie (ICT) 6/A02
Hochschule Magdeburg-Stendal (FH) - KAT-Kompetenzzentrum an der
Hochschule Magdeburg-Stendal 4/C22
Jakob Winter GmbH 6/B28
Mondi 4/E41
Plasticon France SA 4/D20d
07060000 Metallmatrix-Verbund07060000 Metallmatrix Verbund
pMetal Matrix Composites
COREX-HONEYCOMB a devision of Encocam Ltd. 6/F42
07090000 Kohlenstofffaserverstärkter Kohlenstoff (CFC)07090000 Kohlenstofffaserverstärkter Kohlenstoff (CFC)
Carbon Fibre Reinforced Carbon
c2i s.r.o. 4/A10
Carbon Composites e.V. 4/B04
Connova AG 4/B10
CSA COMPOSITE 4/E01
HUBER+SUHNER AG - Business Unit Composites 6/E30
07100000 Faserverstärkter Beton07100000 Faserverstärkter Beton
Fibre Reinforced Concrete
SGL TECHNOLOGIES GmbH 4/F01
07110000 Sonstige Verbundwerkstoffprodukte07110000 Sonstige Verbundwerkstoffprodukte
pOther Composite Products
ADETE - Advanced Engineering & Technologies GmbH 6/D38
JETCAM 6/F27
Gummiwerk KRAIBURG GmbH & Co. KG 6/B04
Lantor B.V. 4/D40g
Nief Plastic Group 4/B07
SWAP (Sachsen) GmbH - Verbundwerkstoffe 4/E17
Weiss Chemie + Technik GmbH & Co. KG 4/A16
Zaklady Laminatów Poliestrowych TROKOTEX Sp. z.o.o. 4/F18
08000000 Bauteile / Produkte für Anwendungsindustrien
Components / Products for Application Industries
08010000 Automobil (Pkw und Lkw)08010000 Automobil (Pkw und Lkw)
Automotive (Cars and Trucks)
ADETE - Advanced Engineering & Technologies GmbH 6/D38
BASF SE 4/B26
c2i s.r.o. 4/A10
Carbopress Composites SRL 4/D06
Compositech Srl 4/C04
CORATEC AG - Verbundelemente Technologie 6/B34
COREX-HONEYCOMB a devision of Encocam Ltd. 6/F42
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
DD-Compound UG 6/E14
DELIGNIT - BLOMBERGER HOLZINDUSTRIE B. HAUSMANN GMBH & CO. KG 6/C17
DELTA-PREG S.P.A. UNINOMINALE 4/C14
ebalta Kunststoff GmbH 4/A18
Fiber Engineering GmbH 4/C02
FORMAX 4/E02
Fraunhofer-Institut für Werkstoffmechanik IWM 6/A02
FRIMO Group GmbH 6/E11, PDA_Foyer_6
G. Angeloni Srl 4/C08
Güth & Wolf GmbH 4/E29
Gurit (UK) 4/D07
HACO S.a.r.l. 4/F17
Alfred Härer GmbH, Werkzeug-und Formenbau - Haero Carbon GmbH 6/G04
Höfer Presstechnik GmbH 6/C16
Hofer Textilveredelung GmbH 6/B04
Hufschmied Zerspanungssysteme GmbH 6/E40
IFC Composite GmbH 6/D28
Institut für Verbundwerkstoffe GmbH - TU Kaiserslautern 6/B07
Kaneka Belgium NV 4/F36
KauPo Plankenhorn e.K. 4/B40
KEGELMANN TECHNIK GmbH 4/A14
Kelteks d.o.o. tvornice tekstila 4/D13
KÖMMERLING CHEMISCHE FABRIK GMBH 4/D24
Gummiwerk KRAIBURG GmbH & Co. KG 6/B04
KREMPEL GmbH 4/D10
KSL Keilmann Sondermaschinenbau GmbH 6/G08
Maag Technic GmbH 4/B05
Munich Composites GmbH 4/D02
NECUMER GmbH 4/F19
190
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors08010000 - 08110000
Peak Technology GmbH 4/B04
Quadrant Plastic Composites AG 6/B22
Reichenbacher HAMUEL GmbH 6/G09
SAERTEX GmbH & Co. KG 6/A06
SAT 6/E48
Scherenmanufaktur PAUL GmbH 6/A37
Schneider Form GmbH - Kunststoff- und Druckgussformen 6/E06
Sigmatex (UK) Ltd 4/F05
Sika Deutschland GmbH 4/A24
SWAP (Sachsen) GmbH - Verbundwerkstoffe 4/E17
Technische Universität Dresden - Institut für Leichtbau und
Kunststofftechnik 4/C22, PDA_Foyer_4
Universität Rostock - Lehrstuhl Konstruktionstechnik/ Leichtbau 4/C22
Wihag Composites GmbH & Co. KG 4/F07
Kunststoffverarbeitung Wimmer GmbH 6/D04
W. Piekenbrink GmbH 4/D25
08020000 Bau / Konstruktion 08020000 Bau / Konstruktion
gBuilding / Construction
BIJL Profielen BV 4/A32
CORATEC AG - Verbundelemente Technologie 6/B34
COREX-HONEYCOMB a devision of Encocam Ltd. 6/F42
EBF Dresden GmbH - Forschung, Entwicklung, Erprobung 4/D03
FutureCarbon GmbH 4/F42
Institut für Verbundwerkstoffe GmbH - TU Kaiserslautern 6/B07
Jiangsu Jiuding New Material Co Ltd. 6/B36h
KÖMMERLING CHEMISCHE FABRIK GMBH 4/D24
Maag Technic GmbH 4/B05
Paul Bauder GmbH & Co. KG 4/B42
Quadrant Plastic Composites AG 6/B22
SAERTEX GmbH & Co. KG 6/A06
08030000 Bauwesen / Infrastruktur 08030000 Bauwesen / Infrastruktur
g gCivil Engineering / Infrastructure
BIJL Profielen BV 4/A32
Europea D.o.o. 4/E32
SAERTEX GmbH & Co. KG 6/A06
08040000 Eisenbahn / Busse / Massenverkehr 08040000 Eisenbahn / Busse / Massenverkehr
pRail / Buses / Mass Transportation
ADETE - Advanced Engineering & Technologies GmbH 6/D38
BIJL Profielen BV 4/A32
CEL Components S.r.l. 6/E04
COREX-HONEYCOMB a devision of Encocam Ltd. 6/F42
DELIGNIT - BLOMBERGER HOLZINDUSTRIE B. HAUSMANN GMBH & CO. KG 6/C17
DELTA-PREG S.P.A. UNINOMINALE 4/C14
ebalta Kunststoff GmbH 4/A18
FRIMO Group GmbH 6/E11, PDA_Foyer_6
HACO S.a.r.l. 4/F17
Hofer Textilveredelung GmbH 6/B04
KÖMMERLING CHEMISCHE FABRIK GMBH 4/D24
Gummiwerk KRAIBURG GmbH & Co. KG 6/B04
SAERTEX GmbH & Co. KG 6/A06
08050000 Elektrik / Elektronik 08050000 Elektrik / Elektronik
Electrical / Electronics
2R-Tec GmbH & Co. KG 6/F17
KREMPEL GmbH 4/D10
08060000 Flugzeuge / Luft- und Raumfahrt 08060000 Flugzeuge / Luft und Raumfahrt
pAircraft / Aerospace
ADETE - Advanced Engineering & Technologies GmbH 6/D38
BASF SE 4/B26
c2i s.r.o. 4/A10
Carbopress Composites SRL 4/D06
Compositech Srl 4/C04
DG Flugzeugbau GmbH 4/F04
Dutch Thermoplastic Components 4/A38
ebalta Kunststoff GmbH 4/A18
Fraunhofer Institut für Fertigungstechnik und Angewandte
Materialforschung IFAM 6/A02
Fraunhofer-Institut für Werkstoffmechanik IWM 6/A02
FRIMO Group GmbH 6/E11, PDA_Foyer_6
GMA Werkstoffprüfung GmbH 4/C13
HACO S.a.r.l. 4/F17
Hufschmied Zerspanungssysteme GmbH 6/E40
Institut für Verbundwerkstoffe GmbH - TU Kaiserslautern 6/B07
Kaneka Belgium NV 4/F36
KauPo Plankenhorn e.K. 4/B40
KEGELMANN TECHNIK GmbH 4/A14
Gummiwerk KRAIBURG GmbH & Co. KG 6/B04
KREMPEL GmbH 4/D10
NECUMER GmbH 4/F19
Peak Technology GmbH 4/B04
Premier Hose Technologies Ltd. 4/A15
Reichenbacher HAMUEL GmbH 6/G09
SAERTEX GmbH & Co. KG 6/A06
SAT 6/E48
Scherenmanufaktur PAUL GmbH 6/A37
Schneider Form GmbH - Kunststoff- und Druckgussformen 6/E06
Sigmatex (UK) Ltd 4/F05
Sika Deutschland GmbH 4/A24
Technische Universität Dresden -
Institut für Leichtbau und Kunststofftechnik 4/C22, PDA_Foyer_4
Kunststoffverarbeitung Wimmer GmbH 6/D04
W. Piekenbrink GmbH 4/D25
08070000 Industrielles / Allgemeines Ingenieurwesen08070000 Industrielles / Allgemeines Ingenieurwesen
g gIndustrial / General Engineering
ACC Technologies GmbH & Co. KG 4/C02
ADETE - Advanced Engineering & Technologies GmbH 6/D38
BIJL Profielen BV 4/A32
Carbopress Composites SRL 4/D06
CORATEC AG - Verbundelemente Technologie 6/B34
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
DELTA-PREG S.P.A. UNINOMINALE 4/C14
ebalta Kunststoff GmbH 4/A18
EBF Dresden GmbH - Forschung, Entwicklung, Erprobung 4/D03
Norafin Industries (Germany) GmbH 4/D03
SAERTEX GmbH & Co. KG 6/A06
08080000 Konsumentenprodukte08080000 Konsumentenprodukte
Consumer Products
FRIMO Group GmbH 6/E11, PDA_Foyer_6
Hochschule Magdeburg-Stendal (FH) -
KAT-Kompetenzzentrum an der Hochschule Magdeburg-Stendal 4/C22
VDID - Verband Deutscher - Industrie Designer e.V. 6/F50
08090000 Korrosionsschutz / chemikalienbeständige Ausrüstung08090000 Korrosionsschutz / chemikalienbeständige Ausrüstung
q pCorrosion Protection / Chemical Resistant Equipment
PLASTIC GLASS S.r.l. 6/D01
08100000 Landwirtschaft08100000 Landwirtschaft
gAgriculture
Europea D.o.o. 4/E32
FRIMO Group GmbH 6/E11, PDA_Foyer_6
HACO S.a.r.l. 4/F17
KEGELMANN TECHNIK GmbH 4/A14
08110000 Marine / Schiffbau08110000 Marine / Schiffbau
p gMarine / Shipbuilding
ADETE - Advanced Engineering & Technologies GmbH 6/D38
DD-Compound UG 6/E14
DIAB GmbH 4/F25
ebalta Kunststoff GmbH 4/A18
FRIMO Group GmbH 6/E11, PDA_Foyer_6
191
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors08110000 - 09010200
HACO S.a.r.l. 4/F17
KauPo Plankenhorn e.K. 4/B40
KEGELMANN TECHNIK GmbH 4/A14
Kelteks d.o.o. tvornice tekstila 4/D13
KÖMMERLING CHEMISCHE FABRIK GMBH 4/D24
KREMPEL GmbH 4/D10
NECUMER GmbH 4/F19
Reichenbacher HAMUEL GmbH 6/G09
SAERTEX GmbH & Co. KG 6/A06
Sigmatex (UK) Ltd 4/F05
Sika Deutschland GmbH 4/A24
TAMSEN MARITIM GmbH 4/F24
08120000 Medizin 08120000 Medizin
Medical
ACC Technologies GmbH & Co. KG 4/C02
ADETE - Advanced Engineering & Technologies GmbH 6/D38
Carbopress Composites SRL 4/D06
CG TEC GmbH Carbon- & Glasfasertechnik 6/B04
Compositech Srl 4/C04
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
DELTA-PREG S.P.A. UNINOMINALE 4/C14
FRIMO Group GmbH 6/E11, PDA_Foyer_6
Alfred Härer GmbH, Werkzeug-und Formenbau -
Haero Carbon GmbH 6/G04
Hufschmied Zerspanungssysteme GmbH 6/E40
Institut für Verbundwerkstoffe GmbH - TU Kaiserslautern 6/B07
SAERTEX GmbH & Co. KG 6/A06
08130000 Offshore 08130000 Offshore
Offshore
DIAB GmbH 4/F25
SAERTEX GmbH & Co. KG 6/A06
TAMSEN MARITIM GmbH 4/F24
08140000 Sport, Freizeit 08140000 Sport, Freizeit
pSports, Leisure
all ahead composites GmbH - bike ahead composites 6/G04
Bcomp Ltd. 4/D05
Carbopress Composites SRL 4/D06
Compositech Srl 4/C04
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
DELTA-PREG S.P.A. UNINOMINALE 4/C14
FRIMO Group GmbH 6/E11, PDA_Foyer_6
Alfred Härer GmbH, Werkzeug-und Formenbau - Haero Carbon GmbH 6/G04
Institut für Verbundwerkstoffe GmbH - TU Kaiserslautern 6/B07
KEGELMANN TECHNIK GmbH 4/A14
Munich Composites GmbH 4/D02
SAERTEX GmbH & Co. KG 6/A06
08150000 Verteidigung 08150000 Verteidigung
Defence
ADETE - Advanced Engineering & Technologies GmbH 6/D38
c2i s.r.o. 4/A10
Compositech Srl 4/C04
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
DELIGNIT - BLOMBERGER HOLZINDUSTRIE B. HAUSMANN GMBH & CO. KG 6/C17
SAERTEX GmbH & Co. KG 6/A06
SAT 6/E48
08160000 Wasserkontrolle / Abwasser 08160000 Wasserkontrolle / Abwasser
g gWater Testing / Sewage
ADETE - Advanced Engineering & Technologies GmbH 6/D38
Europea D.o.o. 4/E32
SAERTEX GmbH & Co. KG 6/A06
08170000 Windenergie08170000 Windenergie
gyWind Energy
ADETE - Advanced Engineering & Technologies GmbH 6/D38
BASF SE 4/B26
c2i s.r.o. 4/A10
DD-Compound UG 6/E14
DELTA-PREG S.P.A. UNINOMINALE 4/C14
DIAB GmbH 4/F25
ebalta Kunststoff GmbH 4/A18
fibretech composites GmbH 6/B23
Fraunhofer Institut für Fertigungstechnik und Angewandte
Materialforschung IFAM 6/A02
FRIMO Group GmbH 6/E11, PDA_Foyer_6
FutureCarbon GmbH 4/F42
HACO S.a.r.l. 4/F17
Institut für Verbundwerkstoffe GmbH - TU Kaiserslautern 6/B07
Kaneka Belgium NV 4/F36
KauPo Plankenhorn e.K. 4/B40
KEGELMANN TECHNIK GmbH 4/A14
Kelteks d.o.o. tvornice tekstila 4/D13
KÖMMERLING CHEMISCHE FABRIK GMBH 4/D24
SAERTEX GmbH & Co. KG 6/A06
SAT 6/E48
TAMSEN MARITIM GmbH 4/F24
08180000 Sonstige Bauteile / Produkte für Anwendungsindustrien08180000 Sonstige Bauteile / Produkte für Anwendungsindustrien
ppOther Parts / Products for Application Industries
3D-CORE - Extended Structured Composites GmbH & Co.KG 4/A06
DURAtec AG 6/B24
Fiber Engineering GmbH 4/C02
FRIMO Group GmbH 6/E11, PDA_Foyer_6
KREMPEL GmbH 4/D10
PLASTIC GLASS S.r.l. 6/D01
SAERTEX GmbH & Co. KG 6/A06
09000000 Services und Dienstleistungen
Other Services
09010100 Distributoren09010100 Distributoren
Distributors
BÜFA Composites GmbH & Co KG 4/D38, 4/PDA_F
ebalta Kunststoff GmbH 4/A18
G. Angeloni Srl 4/C08
GRM Systems s.r.o. 4/F21
09010200 Berater09010200 Berater
Consultants
+Composites c/o INM Leibniz-Institut für Neue Materialien gGmbH 4/A33
ADETE - Advanced Engineering & Technologies GmbH 6/D38
Advanced Composites Solutions Srl 4/F31
BÜFA Composites GmbH & Co KG 4/D38, 4/PDA_F
Cluster Neue Werkstoffe -
Bayern Innovativ Gesellschaft für Innovation und Wissenstransfer mbH 6/B04
CoTexx GmbH 6/B04
DD-Compound UG 6/E14
Forum Technologie und Wirtschaft e.V. - BasaltFaserNetzwerk 4/D03
Fraunhofer Entwicklungszentrum Röntgentechnik - EZRT 4/B04
Fraunhofer IPA - Projektgruppe Prozessinnovation 6/B04
Grasse Zur Ingenieurgesellschaft mbH 6/G17
Holland Composites Pavilion 4/A32 - 4/B37
Kaiser Stähler Rekrutierungsberatung GmbH
Empore Halle 6
„KI - Kunststoff Information“ -
Kunststoff Information Verlagsgesellschaft mbH 6/C30 Media Pavilion
MAI Carbon 4/B04
„PIE – Plastics Information Europe“ -
Kunststoff Information Verlagsgesellschaft mbH 6/C30 Media Pavilion
Siemens PLM Software 4/B04
SKZ - Das Kunststoff-Zentrum 4/E22
TPRC - THERMOPLASTIC COMPOSITES RESEARCH CENTER 4/B36
Universität Rostock - Lehrstuhl Konstruktionstechnik/ Leichtbau 4/C22
192
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors09010300 - 09010700
09010300 Forschungsinstitute / -organisationen 09010300 Forschungsinstitute / organisationen
gResearch Institutes / Organisations
+Composites
c/o INM Leibniz-Institut für Neue Materialien gGmbH 4/A33
Akademische Fliegergruppe Stuttgart e.V. 4/B08
EBF Dresden GmbH - Forschung, Entwicklung, Erprobung 4/D03
EuCIA - European Composites Industry Association 4/D40e
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. 6/A02
Fraunhofer Institut für Chemische Technologie (ICT) 6/A02
Fraunhofer Institut für Fertigungstechnik und
Angewandte Materialforschung IFAM 6/A02
Fraunhofer-Institut für Betriebsfestigkeit - und
Systemzuverlässigkeit LBF 6/A02
Fraunhofer Entwicklungszentrum Röntgentechnik - EZRT 4/B04
Fraunhofer Institut für Techno- und Wirtschaftsmathematik ITWM 6/A02
Fraunhofer-Institut für Werkstoffmechanik IWM 6/A02
Fraunhofer-Institut für Zerstörungsfreie Prüfverfahren - IZFP 6/A02
Fraunhofer IPA - Projektgruppe Prozessinnovation 6/B04
Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS 4/B04
Hochschule Magdeburg-Stendal (FH) -
KAT-Kompetenzzentrum an der Hochschule Magdeburg-Stendal 4/C22
Institut für Kunststoffverarbeitung - RWTH Aachen 4/D30, 4/PDA_A, 4/PDA_C
Institut für Verbundwerkstoffe GmbH - TU Kaiserslautern 6/B07
ITV Institut für Textil- und Verfahrenstechnik 4/C02
Karlsruher Institut für Technologie (KIT) -
Karlsruhe Institute of Technology (KIT) 6/G37
MAI Carbon 4/B04
SKZ - Das Kunststoff-Zentrum 4/E22
Technische Universität Dresden -
Institut für Leichtbau und Kunststofftechnik 4/C22, PDA_Foyer_4
Technische Universität Ilmenau - Fakultät Maschinenbau -
Fachgebiet Kunststofftechnik 4/C22
TPRC - THERMOPLASTIC COMPOSITES RESEARCH CENTER 4/B36
TU Chemnitz - Institut für Strukturleichtbau und Kunststoffverarbeitung 4/F03
Friedrich-Schiller-Universität Jena - Physikalisch-Astronomische
Fakultät Institut für Materialwissenschaft und Werkstofftechnologie 4/C22
Universität Rostock - Lehrstuhl Konstruktionstechnik/ Leichtbau 4/C22
09010400 Bildungs- / Trainingsinstitutionen 09010400 Bildungs / Trainingsinstitutionen
gEducational / Training Institutions
+Composites c/o INM Leibniz-Institut für Neue Materialien gGmbH 4/A33
Akademische Fliegergruppe Stuttgart e.V. 4/B08
AVK - Industrievereinigung Verstärkte Kunststoffe e.V. 4/C41, 4/D40, 4/D41
CADFEM GmbH 6/D40
CFK-Valley Stade e.V. 4/D40f
Cluster Neue Werkstoffe -
Bayern Innovativ Gesellschaft für Innovation und Wissenstransfer mbH 6/B04
EuCIA - European Composites Industry Association 4/D40e
Fraunhofer Institut für Fertigungstechnik und Angewandte
Materialforschung IFAM 6/A02
„KI - Kunststoff Information“ -
Kunststoff Information Verlagsgesellschaft mbH 6/C30 Media Pavilion
MAI Carbon 4/B04
„PIE – Plastics Information Europe“ -
Kunststoff Information Verlagsgesellschaft mbH 6/C30 Media Pavilion
SKZ - Das Kunststoff-Zentrum 4/E22
TPRC - THERMOPLASTIC COMPOSITES RESEARCH CENTER 4/B36
TU Chemnitz - Institut für Strukturleichtbau und Kunststoffverarbeitung 4/F03
Universität Rostock - Lehrstuhl Konstruktionstechnik/ Leichtbau 4/C22
09010500 Unabhängige Prüfanstalten 09010500 Unabhängige Prüfanstalten
p g gIndependent Testing Organisations
Fraunhofer-Institut für Betriebsfestigkeit - und Systemzuverlässigkeit LBF 6/A02
Fraunhofer-Institut für Werkstoffmechanik IWM 6/A02
GMA Werkstoffprüfung GmbH 4/C13
SKZ - Das Kunststoff-Zentrum 4/E22
09010600 Publikationen / Verlage 09010600 Publikationen / Verlage
Publications / Publishers
„adhäsion KLEBEN & DICHTEN“ -
Springer Fachmedien Wiesbaden GmbH 4/A04, 6/C30 Media Pavilion
„A+D+M“ - Publicomm S.r.l. 6/C30 Media Pavilion
Advanced Composites Solutions Srl 4/F31
„Aerospace Manufacturing“ - MIT Publishing Ltd. 6/C30 Media Pavilion
„All about Sourcing“ - Network Press Germany GmbH 6/C30 Media Pavilion
„AUTOCAD & Inventor Magazin“ -
WIN-Verlag GmbH & Co.KG 6/C30 Media Pavilion
„AutomobilKONSTRUKTION“ -
Konradin Verlag R. Kohlhammer GmbH 6/C30 Media Pavilion
„Automobil Industrie“ -
Vogel Business Media GmbH & Co. KG 6/C30 Media Pavilion
„AVR Allgemeiner Vliesstoff-Report“ -
dpw-Verlagsgesellschaft mbH 6/C30 Media Pavilion
„BRÜCKEbulletin“ -
Feliciter Kiadó/ Feliciter Publishing Ltd. 6/C30 Media Pavilion
„chemie & more“ - succidia AG 6/C30 Media Pavilion
„Composite Solutions“ - CREI srl 6/G49, 6/C30 Media Pavilion
„Composite World“ -
Union of Composites Manufacturers (UNCM) 4/A35, 6/C30 Media Pavilion
„construction materials, equipment,
technologies of 21 century“ - AK marketing & consult 6/C30 Media Pavilion
CREI - Centro Ricerche Editoriali -
Internazionali Srl 6/G49, 6/C30 Media Pavilion
„Digital Engineering“ - WIN-Verlag GmbH & Co.KG 6/C30 Media Pavilion
„Digital Manufacturing“ - WIN-Verlag GmbH & Co.KG 6/C30 Media Pavilion
„EURAILmag“ - Blu Line & Bro 6/C30 Media Pavilion
„FAPU - Fachmagazin für die Polyurethanindustrie“ -
KP Verlag 6/C30 Media Pavilion
„GAK - Gummi Fasern Kunststoffe“ - Dr. Gupta Verlag 6/C30 Media Pavilion
„HANSA“ - Schiffahrts-Verlag „Hansa“ GmbH & Co. KG 6/C30 Media Pavilion
Hengstmann Solutions GmbH 6/F21
„Industrial Engineering News“ - Thomas Industrial
Media GmbH 6/C30 Media Pavilion
„Industriemagazin“ - Industriemagazin Verlag GmbH 6/C30 Media Pavilion
„Interceram“ - Expert Fachmedien GmbH 6/C30 Media Pavilion
„Jahresmagazin Ingenieurwissenschaften Deutschland -
Werkstofftechnologie“ -
ALPHA Informationsgesellschaft mbH 6/C30 Media Pavilion
„KEM Konstruktion Entwicklung Management“ -
Konradin Verlag R. Kohlhammer GmbH 6/C30 Media Pavilion
„Keramische Fachzeitschrift“ - Expert Fachmedien GmbH 6/C30 Media Pavilion
„KI - Kunststoff Information“ -
Kunststoff Information Verlagsgesellschaft mbH 6/C30 Media Pavilion
„Konstruktionspraxis“ -
Vogel Business Media GmbH & Co. KG 6/C30 Media Pavilion
„KunststoffXtra“ - SIGWERB GmbH 6/C30 Media Pavilion
„K-Zeitung“ - Giesel Verlag GmbH 6/C30 Media Pavilion
„lightweight design“ -
Springer Fachmedien Wiesbaden GmbH 4/A04, 6/C30 Media Pavilion
„MM Maschinenmarkt“ -
Vogel Business Media GmbH & Co. KG 6/C30 Media Pavilion
Mybusinessmedia 4/A36, 6/C30 Media Pavilion
„PIE – Plastics Information Europe“ -
Kunststoff Information Verlagsgesellschaft mbH 6/C30 Media Pavilion
“PITTURE E VERNICI-EUROPEAN COATINGS” -
CREI srl 6/G49, 6/C30 Media Pavilion
„ www.plastech.pl“ - Plastech Pawel Wisniewski 6/C30 Media Pavilion
„Plastiques & Caoutchoucs“ - INFOPRO COMMUNICATIONS 6/C30 Media Pavilion
„PU Magazin“ - Dr. Gupta Verlag 6/C30 Media Pavilion
Reinforced Plastics 6/C30 Media Pavilion
„roofing & insulating material“ - AK marketing & consult 6/C30 Media Pavilion
SAE International 4/E31
SAMPE 6/C30 Media Pavilion
Springer Fachmedien Wiesbaden GmbH 4/A04, 6/C30 Media Pavilion
verlag moderne industrie GmbH 6/C30 Media Pavilion
„Werkstoffe der Fertigung“ - HW-Verlag 6/C30 Media Pavilion
„www.chemiaibiznes.com.pl“ -
EPS Media Ewelina Plonska-Stepulak 6/C30 Media Pavilion
09010700 Recyclingdienste09010700 Recyclingdienste
y gRecycling Services
Adesso Advanced Materials Wuxi Co.,Ltd 6/B36j
CFK-Valley Stade e.V. 4/D40f
ITV Institut für Textil- und Verfahrenstechnik s4/C02
193
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors09010800 - 09020100
09010800 Normenorganisationen 09010800 Normenorganisationen
gStandards Organizations
Union of Composites Manufacturers (UNCM) 4/A35, 6/C30 Media Pavilion
09010900 Fachverbände 09010900 Fachverbände
Trade Associations
ACMA - American Composites Manufacturers Association 6/G39c
AFBW - Allianz Faserbasierte Werkstoffe Baden-Wüttemberg e.V. 4/C02
Assocompositi - Italian Industry Composites Association 6/C02
AVK - Industrievereinigung Verstärkte Kunststoffe e.V. 4/C41, 4/D40, 4/D41
CFK-Valley Stade e.V. 4/D40f
EPTA European Pultrusion Technology Association - c/o AVK e.V. 4/F43
EuCIA - European Composites Industry Association 4/D40e
Euro-RTM-Group - c/o AVK e.V. 4/PDA_B
Leichtbau BW GmbH - Landesagentur für Leichtbau C2/B13 HYBRID Expo
Leichtbauzentrum Baden-Württemberg - LBZ-BW e.V. 4/C02
MAI Carbon 4/B04
VDMA e.V. - Forum Composites Technology 6/B08
09011000 CAD / CAM-Dienstleister 09011000 CAD / CAM Dienstleister
CAD / CAM Services
CADFEM GmbH 6/D40
CORIOLIS COMPOSITES SAS 4/B04
Fraunhofer IPA - Projektgruppe Prozessinnovation 6/B04
HACO S.a.r.l. 4/F17
KURIS Spezialmaschinen GmbH 6/G07
P+Z Engineering GmbH 4/B04
Schneider Form GmbH - Kunststoff- und Druckgussformen 6/E06
Siemens PLM Software 4/B04
SWMS Systemtechnik - Ingenieurgesellschaft mbH 6/E36
VDID - Verband Deutscher - Industrie Designer e.V. 6/F50
ZCK Zuschnittcenter u. Faserverbundtechnik Gmbh & Co. KG 6/B04
09011100 Qualitätssicherung 09011100 Qualitätssicherung
yQuality Assurance
BST ProControl GmbH 4/F11
edevis GmbH 6/E18
EVS - ELBIT VISION SYSTEMS LTD. 4/F11
Fraunhofer Institut für Fertigungstechnik und Angewandte
Materialforschung IFAM 6/A02
GMA Werkstoffprüfung GmbH 4/C13
P+Z Engineering GmbH 4/B04
09011200 Prototypenbau 09011200 Prototypenbau
ypPrototype Construction
ASS Maschinenbau GmbH 6/G06
DG Flugzeugbau GmbH 4/F04
EBF Dresden GmbH - Forschung, Entwicklung, Erprobung 4/D03
fibretech composites GmbH 6/B23
Fraunhofer-Institut für Betriebsfestigkeit - und Systemzuverlässigkeit LBF 6/A02
Fraunhofer IPA - Projektgruppe Prozessinnovation 6/B04
FRIMO Group GmbH 6/E11, PDA_Foyer_6
HACO S.a.r.l. 4/F17
Karl Mayer Textilmaschinenfabrik GmbH 4/B04
KEGELMANN TECHNIK GmbH 4/A14
Linn High Therm GmbH 6/G36
McClean Anderson 6/G39e
P+Z Engineering GmbH 4/B04
Schaumform GmbH 6/B16
TAMSEN MARITIM GmbH 4/F24
Technische Universität Dresden -
Institut für Leichtbau und Kunststofftechnik 4/C22, PDA_Foyer_4
ZCK Zuschnittcenter u. Faserverbundtechnik Gmbh & Co. KG 6/B04
09011300 Simulation / Auslegung09011300 Simulation / Auslegung
gSimulation / Dimensioning
ADETE - Advanced Engineering & Technologies GmbH 6/D38
Advanced Composites Solutions Srl 4/F31
ASS Maschinenbau GmbH 6/G06
BASF SE 4/B26
CADFEM GmbH 6/D40
Compositence GmbH 6/E16
CoTexx GmbH 6/B04
EBF Dresden GmbH - Forschung, Entwicklung, Erprobung 4/D03
fibretech composites GmbH 6/B23
Fraunhofer-Institut für Betriebsfestigkeit - und Systemzuverlässigkeit LBF 6/A02
Fraunhofer Institut für Techno- und Wirtschaftsmathematik ITWM 6/A02
Fraunhofer-Institut für Werkstoffmechanik IWM 6/A02
FRIMO Group GmbH 6/E11, PDA_Foyer_6
ITV Institut für Textil- und Verfahrenstechnik 4/C02
Karl Mayer Textilmaschinenfabrik GmbH 4/B04
P+Z Engineering GmbH 4/B04
SWMS Systemtechnik - Ingenieurgesellschaft mbH 6/E36
Technische Universität Dresden -
Institut für Leichtbau und Kunststofftechnik 4/C22, PDA_Foyer_4
Technische Universität Ilmenau - Fakultät Maschinenbau -
Fachgebiet Kunststofftechnik 4/C22
Technische Universität Dresden -
Institut für Werkzeugmaschinen und Steuerungstechnik 4/C22
09011400 Brandschutzssysteme09011400 Brandschutzssysteme
yFire Protection Systems
SICOMIN - EPOXY SYSTEMS 4/B41
09011500 Sonstige Dienstleistungen09011500 Sonstige Dienstleistungen
Other Services
+Composites c/o INM Leibniz-Institut für Neue Materialien gGmbH 4/A33
Advanced Composites Solutions Srl 4/F31
AFBW - Allianz Faserbasierte Werkstoffe Baden-Wüttemberg e.V. 4/C02
Akademische Fliegergruppe Stuttgart e.V. 4/B08
AUTOMATICA - 6. Internationale Fachmesse für Automation und
Mechatronik - Messe München GmbH 6/G45
brainLight GmbH 6/A14
Cluster Neue Werkstoffe - Bayern Innovativ Gesellschaft für
Innovation und Wissenstransfer mbH 6/B04
CT Platon GmbH 4/B37
ELOVIS GmbH - Längen- und Geschwindigkeitsmesstechnik 4/F11
FRIMO Group GmbH 6/E11, PDA_Foyer_6
IBT.InfraBioTech GmbH 6/G05
„Industrial Engineering News“ -
Thomas Industrial Media GmbH 6/C30 Media Pavilion
JETCAM 6/F27
Leichtbau BW GmbH - Landesagentur für Leichtbau C2/B13 HYBRID Expo
MAI Carbon 4/B04
NETZSCH-Gerätebau GmbH 6/B17
P+Z Engineering GmbH 4/B04
SAE International 4/E31
SKZ - Das Kunststoff-Zentrum 4/E22
Union of Composites Manufacturers (UNCM) 4/A35, 6/C30 Media Pavilion
09020100 Software - Design09020100 Software Design
gSoftware - Design
Advanced Composites Solutions Srl 4/F31
Altair Engineering GmbH 4/C02
Compositence GmbH 6/E16
Dassault Systèmes Deutschland GmbH 6/C12
Siemens PLM Software 4/B04
SWMS Systemtechnik - Ingenieurgesellschaft mbH 6/E36
Tebis AG 6/C15
194
Warengruppen mit Ausstellerfi rmen
Product groups with exhibitors09020100 - 10010000
VDID - Verband Deutscher - Industrie Designer e.V. 6/F50
09020200 Software - Kalkulation 09020200 Software Kalkulation
gSoftware - Cost Estimating
Technische Universität Dresden -
Institut für Werkzeugmaschinen und Steuerungstechnik 4/C22
09020300 Software - Materialdatenbanken 09020300 Software Materialdatenbanken
Software - Materials Databases
Advanced Composites Solutions Srl 4/F31
Granta Design Ltd. - Material Intelligence 6/D42
JETCAM 6/F27
Technische Universität Dresden -
Institut für Werkzeugmaschinen und Steuerungstechnik 4/C22
VDID - Verband Deutscher - Industrie Designer e.V. 6/F50
09020400 Software - Maschinensteuerung 09020400 Software Maschinensteuerung
Software - Machine Control
BST ProControl GmbH 4/F11
Dassault Systèmes Deutschland GmbH 6/C12
JETCAM 6/F27
McClean Anderson 6/G39e
Tebis AG 6/C15
Technische Universität Dresden - Institut für Werkzeugmaschinen
und Steuerungstechnik 4/C22
09020500 Software - Simulation 09020500 Software Simulation
Software - Simulation
Altair Engineering GmbH 4/C02
CADFEM GmbH 6/D40
Compositence GmbH 6/E16
Dassault Systèmes Deutschland GmbH 6/C12
Fill Gesellschaft m.b.H. 6/C06
Fraunhofer Institut für Techno- und Wirtschaftsmathematik ITWM 6/A02
Fraunhofer IPA - Projektgruppe Prozessinnovation 6/B04
Karlsruher Institut für Technologie (KIT) -
Karlsruhe Institute of Technology (KIT)6/G37
Siemens PLM Software 4/B04
SWMS Systemtechnik - Ingenieurgesellschaft mbH 6/E36
Tebis AG 6/C15
09020501 Software - FE-Simulation 09020501 Software FE Simulation
Software - Finite Element Simulation
Altair Engineering GmbH 4/C02
CADFEM GmbH 6/D40
CrossLink Faserverbundtechnik GmbH & Co. KG 6/D41
Dassault Syst mes Deutschland GmbH 6/C12
Fraunhofer Entwicklungszentrum Röntgentechnik - EZRT 4/B04
Fraunhofer Institut für Techno- und Wirtschaftsmathematik ITWM 6/A02
09020502 Software - Prozesssimulation 09020502 Software Prozesssimulation
Software - Process Simulation
Altair Engineering GmbH 4/C02
Dassault Systèmes Deutschland GmbH 6/C12
Fill Gesellschaft m.b.H. 6/C06
TPRC - THERMOPLASTIC COMPOSITES RESEARCH CENTER 4/B36
Technische Universität Dresden - Institut für Werkzeugmaschinen
und Steuerungstechnik 4/C22
10000000 Sonstiges
Miscellaneous
10010000 Sonstiges10010000 Sonstiges
Miscellaneous
Bercella s.r.l 6/G38
CCPIT China Council for the Promotion of International Trade 6/A21, 6/B36i
DOWAKSA ILERI KOMPOZIT MALZEMELER SAN. TIC. A.S 4/E25
EMSZ - Association of - the Manufactures of Reinforced Plastic Materials 6/D39
Forschung für die Zukunft c/o Martin-Luther-Universität Halle 4/C22
hhp home health products AG 4/A26
India Composites Show - Organiser Reed Manch Exhibitions (P) Ltd 4/E28
ITCF Institut für Textilchemie- und Chemiefasern 4/C02
Lucintel 6/F44
Multi-Plot Europe GmbH 4/F11
Union of Composites Manufacturers (UNCM) 4/A35, 6/C30 Media Pavilion
195
Notizen | Notes
196
Notizen | Notes
Visions become reality.
Nachtrag
Addendum
198
Ata - Chi
CNBM FIBERCHINA supply full range of fiberglass products: chopped strand mat, wo-ven roving, direct roving, spray up roving, chop roving and other fiberglass materials. Our market has covered all over the world during past more than 20 years. The main application is for pipe, tank, boat, wind blade, bathtub, vehicle…… For an easy contact when you need, our multi-linguistic sales team is ready at any
time. Please contact [email protected]
China National Building Materials andEquipment Import & Export CorpRm2020,Bldg. No.4, Interwest Center;
No.9, Shouti South Road Haidian District;
Beijing 100044, China
Tel.: 0086 10 6879 6952
Fax: 0086 10 6801 5525
E-Mail: [email protected]
Web: www.cnbm.com.cn
Halle / Stand 6/C29
Der Cluster Technische Textilien Neckar-Alb wurde im Februr 2012 von der IHK Reutlingen ins Leben gerufen. Derzeit beteiligen sich 44 Miglieder an den Clusterak-tivitäten. Zu den Hauptaufgaben des Clustermanagementszählen Internationalisie-rungs-Maßnahmen und Technologietransfer mit dem Ziel, die beteiligten Unternehmen in ihrer Wirtschaftskraft zu stärken. Arbeitskreise zu Zukunftsthemen stellen eineder Maßnahmen dar. Im Bereich der Internationalisierung führt der gebündelte Außenauftritt als Cluster zur gestärkten internationalen Sichtbarkeit – hierzu zählen Gemeinschaftsstände auf branchenrelevanten Messen sowie Publikationen zu aktuellenEntwicklungen in Fachjournalen.
Auf der Composites Europe präsentiert der Cluster-Gemeinschaftsstand Produkte folgender Unternehmen: Gruschwitz GmbH Tech-Twists, Leutkirch - H. Stoll GmbH & Co. KG, Reutlingen -
Tajima GmbH, Winterlingen - tvb Textil- Vertrieb- Beratungs-GmbH, Winterlingen.
Cluster Technische Textilien Neckar-Alb IHK ReutlingenHindenburgstr. 54
72762 Reutlingen, Germany
Tel.: 07121 201 0
Fax: 07121 201 4120
E-Mail: [email protected]
Web: www.expertenforum-textil.de
Halle / Stand 4/A20
c2i engineers and manufactures carbon-fibre components for premium automotive customers incl. Porsche, BMW, JaguarLandRover, Bentley, Peugeot, Alfa Romeo etc. We are based in Slovakia, not far from Bratislava and Vienna Airport. We produce both carbon-look and structural components mainly using Prepreg/Au-toclave and RTM. We have 170 staff with 30 in development / tooling and are undergoing furthergrowth through line-fit programs via EDI scheduling. We have built a new, nicely streamlined production facility with 9,000 m2 and 1200m2 clean room with various autoclaves incl. 3 x 6m, numerous 5-axis CNC machines incl. 3 x 6m, a new paint facility with 8 cabins with carbon-look specialist paintersand some RTM presses incl. 315 ton.We make interior and exterior parts such as dashboards, splitters, spoilers, mirror
covers, gear knobs, monolithic bladder moulded airboxes, air coolers...
c2i s.r.o.Composites Innovations International
Kracanska cesta 51
Dunajska Streda
92901 Slovakia (Slovak Republic)
Tel.: +421 315 528 046
Fax: +421 315 520 207
E-Mail: [email protected]
Web: www.c2i.com
Halle / Stand 4/A10
AT - Automation Technology GmbH was founded in 1998 as a systems house for indus-trial imaging. Since then, we have made it our task to provide efficient vision systems and components for industrial use. We are specialized in technologies for infraredimaging and high-speed 3D imaging.
We offer thermographic solutions for many industrial production steps. This includesnot only systems for inline quality inspection of composite parts and prepregs, but also a range of mobile testing devices for flexible inspection of composite components during production or maintenance.
The 3D division of our company focuses on high-speed 3D sensors. These 3D sensorsare ideal for fast and contactless inline inspection of composite materials such as verification of geometry, position, layer thickness and fibre structure.
AT - Automation Technology GmbHHermann-Bössow-Straße 6-8
23843 Bad Oldesloe, Germany
Tel.: +49 4531-88011-0
Fax: +49 4531-88011-20
E-Mail: [email protected]
Web: www.automationtechnology.de
Halle / Stand 6/C13
A
C
Nachtrag
Addendum
199
Pre - Sch
Gegründet 1990 als Beratungsunternehmen (GmbH seit 1993) sind wir heute ein en-gagiertes Team von ca. 35 Personen, die sich auf Dienstleistungen für CATIA und PLM konzentriert haben. Seit 1995 sind wir autorisierter Geschäftspartner von IBM und Dassault Systèmes für CATIA, seit 2000 Advanced bzw. Certified Partner für CATIA und
ENOVIA SmarTeam, seit 2007 Value-added Reseller (VAR) von Dassault Systèmes.
Schwindt CAD/CAM-Technologie GmbHCallenberger Str. 8
96450 Coburg, Germany
Tel.: 9561 5560 0
Fax: 09561 556010
E-Mail: [email protected]
Web: www.schwindt.net
Halle / Stand 6/C12
Reed Exhibitions Advanced Material ForumReed Exhibitions organizes more than 500 events in 41 countries, in 2012 seven million participants attended our events. The events include trade and consumer exhi-bitions, conferences and meetings, ranging across 44 industry sectors – amongst them aerospace and aviation as well as manufacturing, engineering and advanced materials.The “Reed Exhibitions Advanced Material Forum” provides an overview of international events that are related to advanced materials manufacturing, processing or applicati-on. Leave your business card to receive more information on a specific event or Reed
Exhibitions global portfolio of trade shows and conferences.
Reed Exhibitions Advanced Material ForumReed Exhibitions Deutschland GmbHVölklinger Str. 4
40219 Düsseldorf, Germany
Tel.: +49 211-90191-330
Fax: +49 211-90191-122
E-Mail: [email protected]
Web: www.reedexpo.de
Halle / Stand 4/B06
Q-WAPolenzstraße 54
08485 Lengenfeld, Germany
Tel.: +49 37606 829713
Fax: +49 37606 829713
E-Mail: [email protected]
Web: www.q-wa.net
Halle / Stand 4/A08
Die PRECUPA GmbH zählt seit mehr als 35 Jahren zu den Marktführern im BereichWerkzeugbau und bietet eine einmalige Kombination aus Präzisionsformenbau undAnwenderkompetenz. Ausgerüstet mit modernstem Technikum und flexiblen kom-petenten Mitarbeitern bieten und gewährleisten wir schnelle und praxisorientierte
Lösungen.
PRECUPA Technology GmbHRobert Stolzstr.7
4020 Linz, Austria
Tel.: +49 80417804 0
Fax: +49 80417804 33
E-Mail: [email protected]
Web: www.precupa.de
Halle / Stand 6/B20
P
Q
R
S
Nachtrag
Addendum
200
Tra - Tra
Transcat PLM bietet das gesamte Product Lifecycle Management (PLM) Portfolio vonDassault Systèmes basierend auf CATIA, ENOVIA, DELMIA, SIMULIA, 3DVIA und EXA-LEAD an. Zudem verfügt Transcat PLM über ein breites Angebot an Dienstleistungen: Von der Beratung, Projektkonzeption, Schulung bis zur Anwenderbetreuung vor Ort. Ei-genentwicklungen von Standard- und Individualsoftware für CATIA, ENOVIA & JT sowie die Absicherung und der Betrieb der vorhandenen PLM-Anwendungen & Infrastruktur ergänzen das Portfolio. Mit dem Modul Composite Design von CATIA bietet Transcat PLM die Möglichkeit, die Entwicklung von Bauteilen aus Faserverbundkunststoffen durch die enge Verquickung von Konstruktion und Simulation zu optimieren. Die verschiedenen Composite DesignModule decken von der Entwicklung über die Festigkeitsberechnung bis hin zur Doku-mentation der Fertigungsunterlagen einen wesentlichen Teil des Gesamtprozesses ab.
Dadurch ist eine Verringerung der Entwicklungszeit von bis zu ca. 50% möglich.
Transcat PLM GmbHAm Sandfeld 11c
76149 Karlsruhe, Germany
Tel.: 0049 721 97043-0
Fax: 0049 721 97043-971
E-Mail: [email protected]
Web: www.transcat-plm.com
Halle / Stand 6/C12
T
Nachtrag
Addendum
Top Related