4099
Bo
hrm
asch
inen
-Sch
raub
stö
cke
Dri
llin
g m
ach
ine
vice
s
Bohrmaschinen-Schraubstöcke -- Drilling machine vices
Sicheres Spannen und Fixieren von
Werkstücken auf Bohr- und Meßmaschinen
Reliable clamping and mounting of workpieces
on drilling and measuring machines
Vorteile BOF:
Niedere stabile Ausführung
mit Gewindespindel
Ganzer Spannbereich durch
Drehen überbrückbar
Großer Spannbereich
BOF, BSS, DPV und DPV 3-W
Spannsystem mechanisch,
mit mechanischem Antrieb
Advantages BOF:
Low, stable design with thread
spindle
Entire clamping range within
reach by turning
Large clamping range
Vorteile BSS:
Einhand-Bedienung, Backen-
Schnellverstellung und Spannen
mit nur einem Hebelgriff
Formschlüssige Verriegelung
Advantages BSS:
One-hand operation, rapid jaw
adjustment and clamping with
only one lever
Positive locking
Vorteile DPV und DPV 3-W
Mit Gewindespindel
Ganzer Spannbereich durch
Drehen überbrückbar
Gleichbleibende Baulänge, Spindel
bewegt sich geschützt im Griff
Advantages DPV and
DPV 3-W:
With thread spindle
Entire clamping range within
reach by turning
Constant unit length, spindle
moves protected inside the
handle
BOF, BSS, DPV and DPV 3-W
mechanical clamping system,
mechanical drive
Spannsysteme -- clamping systems
2. VerstellenAdjust
3. SpannenClamp
1. LösenRelease
24484-k004-099 15.02.2007 9:33 Uhr Seite 4099
4100
Bo
hrm
asch
inen
-Sch
raub
stö
cke
Dri
llin
g m
ach
ine
vice
s
Röhm Bohrmaschinenschraubstöcke sind speziell für die Anforderungen auf
Bohrmaschinen konzipiert und werden dort vorwiegend für professionelle
Anwendungen genutzt. In zunehmendem Maße erschließen sich diese Spann-
mittel aber auch einen neuen Einsatzbereich: Sie eignen sich hervorragend für
die Werkstückfixierung auf Meßmaschinen.
Besondere Technische Merkmale
Bohrmaschinen-Schraubstöcke BOF und BSS:
Körper aus Spezialguß
Großer Spannbereich
Befestigungsmöglichkeiten seitlich und stirnseitig
Lange Führung der beweglichen Backe auch im äußeren Spannbereich
Beide Backen mit Auflagefläche zum Spannen flacher Werkstücke
Spannbacken umkehrbar: eine Seite glatt bzw. mit Längs- und Querprismen,
eine Seite gerillt, beidseitig geschliffen
Bohrmaschinen-Schraubstock BOF:
Standard-Ausführung
Bohrmaschinen-Schraubstock BSS:
Zum schnellen Spannen und Entspannen, insbesondere bei
Werkstück-Serienbearbeitung.
Einhand-Bedienung — Backen-Schnellverstellung und Spannen mit nur
einem Hebelgriff
Formschlüssige Verriegelung
Bohrmaschinen-Schraubstöcke DPV und DPV 3-W:
Einfache Ausführung
Körper aus Guß
Universelle Befestigungsmöglichkeit durch Spannschlitze und Langlöcher
Bewegliche Backe, seitlich geführt
Feste Spannbacke mit drei Vertikalprismen
und einem Horizontalprisma
Röhm drilling machine vices are specially designed for the requirements placed
upon drilling machines and are mainly used for professional purposes in this field.
However, these clamping devices are also conquering a new application area in
increasing numbers: They are perfectly suited to mounting workpieces on
measuring machines.
Special technical features
BOF and BSS drilling machine vices:
Body made out of special cast metal
Large clamping range
Mounting possibilities on side and end
Long guidance for movable jaw also in outer clamping range
Both jaws with contact surface for clamping flat workpieces
Clamping jaws reversible: one size smooth, with longitudinal and transversal
prisms respectively, one side grooved, both sides ground
BOF drilling machine vices:
Standard-version
BSS drilling machine vices:
For rapid clamping and unclamping, especially for series machining of
workpieces.
One-hand operation — rapid jaw adjustment and clamping with only one
lever
Positive locking
DPV and DPV 3-W drilling machine vices:
Ordinary version
Body made out of cast metal
Universal attachment option via clamping slots and elongated holes
Movable jaw, mounted on side
Stationary jaw with three vertical and one horizontal prisms
Beide Backen mit Auflagefläche
zum Spannen flacher Werkstücke
Backen und Spindel brüniert
Solide und handliche Ausführung
Bohrmaschinen-
Standard-Ausführung
Bohrmaschinen-
3 Aufspannmöglichkeiten durch
zwei zusätzliche, rechtwinklig
bearbeitete Auflageflächen:
grund-, rechts- und stirnseitig
Both jaws with contact surface for
clamping flat workpieces
Jaws and spindle
gunmetal-finished
Solid and handy version
DPV drilling machine vice:
Standard version
DPV 3-W drilling machine vice:
3 mounting options via two
additional contact surfaces
machined at right angles: base,
right-hand and end-side
Schraubstock DPV:
Schraubstock DPV 3-W:
Bohrmaschinen-Schraubstöcke -- Drilling machine vices
24484-k004-100 15.02.2007 9:34 Uhr Seite 4100
4101
Bo
hrm
asch
inen
-Sch
raub
stö
cke
Dri
llin
g m
ach
ine
vice
s
Bohrmaschinen-Schraubstöcke
Drilling machine vices
BOF Typ 728-00, BSS Typ 728-20
Größe -- size 1 2 3 4
Backenbreite -- jaw width A 90 110 135 160
Spannweite -- clamping range B 90 130 160 220
Backenhöhe -- jaw height C 25 32 40 50
Gesamthöhe -- overall height E 60 72,5 80,5 95,5
Gesamtlänge, geöffnet D BOF 356 470 550 692
Overall length, opened D BSS -- 510 587 --
F 195 315 365 445
G 35 40 40 45
H 37 62 71 76
J 14 17 17 17
K 145 175 205 245
L -- 45 45 45
M 125 85 100 120
N 35 32,5 45,5 47,5
O -- 140 168 190
P 115 140 170 210
Q -- 17 17 17
R 4 3,5 4 4
S 4 3,5 4,5 5
T 145 125 125 160
horizontal -- horizontal U 4-17 3-12 3-13 5-22
vertikal -- vertical V 4-25 5-32 6-40 7-48
Y 12 12 16 16
Backenanschlußmaße a 46 63 80 100
Jaw mounting dimensions b 12 13,6 + 0,5 15,6 + 0,5 19,6 + 0,5
c M6 M6 M8 M8
d 14 12 13 13
Gewicht -- weight ca. kg 5,5 9,5 13,5 25
DPV Typ 729-60
Größe -- size 1 2 3
Backenbreite -- jaw width 80 100 120
Spannweite -- clamping range 70 92 110
Backenhöhe -- jaw height 30 30 30
Gesamtlänge -- overall length 234 272 345
Gesamthöhe -- overall height 58 63,5 63,5
DPV 3-W Typ 729-20
Größe -- size 2
Backenbreite -- jaw width 100
Spannweite -- clamping range 93
Backenhöhe -- jaw height 30
Gesamtlänge -- overall length 279
Gesamthöhe -- overall height 65
F 189
G 159
H 95
J 15
K 122
L 45
M 24
Gewicht -- weight ca. kg 5,1
F 154 175 225
G 142 152 180
J 12,5 14 14
K 105 125 150
L 45 49 64
Gewicht -- weight ca. kg 3,6 4,3 6,3
24484-k004-101 15.02.2007 9:34 Uhr Seite 4101
4102
Bo
hrm
asch
inen
-Sch
raub
stö
cke
Dri
llin
g m
ach
ine
vice
s
Bohrmaschinen-SchraubstöckeDrilling machine vices
AusführungDesign
Type WGTG
Liefer-umfangUnit
GrößeSize
Backen-breiteJawwidth
Id.-Nr.
Bohrmaschinen-SchraubstöckeDrilling machine vices
BOF 1 90 142835BOFStandard Ausführung 728 11 Stück 2 110 111595Standard-Ausführung 728 11 Stück 3 135 111596g
BOF 4 160 111597BOFStandard version
BSS 1 —BSSSchnellspann Schraubstock 728 11 Stück 2 110 134158Schnellspann-Schraubstock 728 11 Stück 3 135 134159p
BSS 4 —BSSQuick action vice
DPV 1 80 863421DPVStandard Ausführung einfach 729 60 12 Stück 2 100 863422Standard-Ausführung, einfach 729-60 12 Stück 3 120 863423g
DPV 4 —DPVStandard version, single
DPV 3 W 1 —DPV 3-WStandard Ausführung einfach 729 20 12 Stück 2 100 007182Standard-Ausführung, einfach,mit 3 Aufspannmöglichkeiten
729-20 12 Stück 3 —gmit 3 Aufspannmöglichkeiten 4 —p g
DPV 3-WStandard version, single,with 3 mounting possibilities
Zubehör ErsatzbackenAccessories for repalcement jaws
Für/For BOF 1 90 332714Für/For BOF728 00 37 Satz 2 110 317259
Prismenbacke und Normal- 728-00 37 Satz 3 135 317260Prismenbacke und Normalbacke SBO mit Werkstück- 4 160 317261backe SBO mit Werkstückauflage, weich und brüniertV-jaw and standard jaw SBOwith work support, soft andgunmetal-finished
Für BSS 1 —Für BSS728 00 37 Satz 2 110 317259
For BSS 728-00 37 Satz 3 135 317260For BSS4 —
Für DPV 1 85 893661Für DPV729 00 37 Satz 2 100 893665
For DPV 729-00 37 Satz 3 120 893669For DPV4 —
Für DPV 3 W 1 —Für DPV 3-W729 00 37 Satz 2 100 490526
For DPV 3-W 729-00 37 Satz 3 —For DPV 3-W4 —
Größe/Size 1+2
Größe/Size 3
24484-k004-102 15.02.2007 9:36 Uhr Seite 4102
Top Related