W027 S ˘ ˇ ˆ ˙˝˛˚˜ ! ˇ # $%& '() *+ *& , 01- ˘ 2 # ˙ˇ1 ˜ ˇ ... ·...
Transcript of W027 S ˘ ˇ ˆ ˙˝˛˚˜ ! ˇ # $%& '() *+ *& , 01- ˘ 2 # ˙ˇ1 ˜ ˇ ... ·...
Item Quantity
1.1 1
1.2 1
1.3 1
1.4 1
1.5 4
20
20
15
15
3
2.1 1
Access
Fitting
Type
Multi Disc Coupon, Note: Material shall be Selected According to Pipe Material or Client Approval.
All Coupons Shall be Pre-weighed,Pre-numbered.
3 inch Strip Coupon. Note: All Coupons Shall be Pre-weighed, Pre-numbered.
Primary Packing for Solid Plug
پروژه نصب تسهيالت سرچاهي و خط لوله جرياني چاه W027S ميدان هما شركت نفت مناطق مركزي ايران
ادوات پايش خوردگيامور مهندسي طرحهاي استمرار و توليد
MTO-0367-PI-00-0
Description
2" Acces Fitting Assay API/ANSI Flange Comply with Piping Class 3000#, Non Tee, A105 C.S Body, Solid Plug with
Viton O-Ring Teflon Primary Packing, Protective Cover without hole.
Multi Disc Coupon Holder Assay, SS316 (Top & Bottom of Line Monitoring)
Note: Length Calculations Based on 7.87" Mating Flange and Pipe 6" Wall Thickness SCH120
Strip Coupon Holder Assay, SS316, (For Bottom of Line Monitoring)
Note: Length Calculations Based on 7.87" Mating Flange and Pipe 8" Wall Thickness SCH120
Solid plug Nut
2" Acces Fitting Assembly API/ANSI Flange Comply with Piping Class 3000#, Non Tee, A105 C.S Body, Hallow Plug with
Primary & Probe Packings, Nut, Protective Cover with hole.
2" Acces Fitting Assay API/ANSI Flange Comply with Piping Class 1500#, Non Tee, A105 C.S Body, Solid Plug with
Viton O-Ring Teflon Primary Packing, Protective Cover without hole.
Stainless Steel Tagging ( 3.87"*1.00" ) For 1.1 and 1.2 Items. Ire Tied
Manufacturer's Name, Model, and Part Number
Viton O-ring for Solid Olug
1.6
Corr
osio
n C
oupon A
ccess
Fitting a
nd A
ccessories
Item Quantity
Access
Fitting
Type
پروژه نصب تسهيالت سرچاهي و خط لوله جرياني چاه W027S ميدان هما شركت نفت مناطق مركزي ايران
ادوات پايش خوردگيامور مهندسي طرحهاي استمرار و توليد
MTO-0367-PI-00-0
Description
2.2 1
2.3 4
2.4 2
2.5 2
2.6 6
15
15
15
3
3.1 1
3.2 1
Hollow Plug Nut
Corr
osio
n P
robe A
ccess F
itting
And A
ccessories
Electrical Resistance Probe for High Pressure Access Fitting, Probe Body Material shall be Selectedwith Fluid
Composition,20 mil Thickness, AISI C1010 C.S for Middle of Line Monitoring, Standard Connector/Sheild.
Note: In Order to Minimize Sensitivity to Iron Sulphide Scaling, Spiral Loop Probe Type Recommended. Probe Length
Calculations Based on 7.87" Mating Flange.
Stainless Steel Tag ( 3.67"*1.00" ) for 2.1 and 2.2 Items, Wire Tied
Manufacturer's Name, Model and Part Number
2.7
2" Acces Fitting Assembly API/ANSI Flange Comply with Piping Class 1500#, Non Tee, A350LF2/A105 C.S Body, Hallow
Plug with Primary & Probe Packings, Nut, Protective Cover with hole.
Set Screw 18-8 SS For Plugs
Probe Packing for Hollow Plug
2" System Flare Weld Access Fitting Assembly, Non Tee, A105 C.S Body, Hallow Plug with Primary & Probe Packings,
Protective Cover with hole.
Probe Transmitter with Self-Contained/Remote Data Logger with 4-20 mA output Transmitter and All
Accessories/Software.
Primary Packing for Hollow Plug
Fixed Probe Adaptor
Hydro
gen P
robe
Hydrogen Cross Bleed Assembly, Complete with Pressure Gauge, Termometer and Bleed Valve
Item Quantity
Access
Fitting
Type
پروژه نصب تسهيالت سرچاهي و خط لوله جرياني چاه W027S ميدان هما شركت نفت مناطق مركزي ايران
ادوات پايش خوردگيامور مهندسي طرحهاي استمرار و توليد
MTO-0367-PI-00-0
Description
3.3 2
3.4 2
4.1 1
4.2 1
4.3 1
4.4 1
4.5 1
4.6 1
4.7 5
Stainless Steel Tag ( 3.67"*1.00" ) for 2.1 and 2.2 Items, Wire Tied
Manufacturer's Name, Model and Part Number
3-ORDER OF HYDROGEN PROBE SHALL BE CONSIDERED FOR SOUR SERVICE AND CLIENT APPROVAL
4-ANY CONFLICT BETWEEN ABOVE DESCRIPTIONS AND CONTRACTOR'S REQUISITION SHA BE CONFIRMED TO CLIENT
Stainless Steel Tag ( 3.67"*1.00" ) for All Items Separately
Manufacturer's Name, Model and Part Number
Shut off Valve
General Notes:
Chem
ical In
jection A
ccess
Fitting a
nd A
ccessories
Nipple
Injection Tube Suitable for X-Head Cap/Core Nozzle,
Note: Tube Length Shall be Calculated Based on Middle of Line Injection
Cap with Core Shall Selected Base on Maximum Inhibitor Injection Rate (Gallon Per Hours) and Pressure Differential
2-ALL CALCULATIONS ACCORDING TO PIPE SIZE/THICKNESS/MATING FLANGE SHALL BE SUBMITTED BY MANUFACTURER.
2" Injection Nut Assay
Size Shall be Selected Based on Vendor's Document
2" Acces Fitting Assay API/ANSI Flange Comply with Piping Class, 1/2" Tee, A105 C.S Body, Solid Plug with Viton O-
Ring Teflon Primary Packing, Protective Cover without hole.
1-MATERIAL CERTIFICATE SHALL BE SUBMITTED ACCORDING TO EN10204 3.2(2004)
Hydro
gen P
robe
Insert Hydrogen Probe, C.S Element, Intrusive Monitoring within Pipe