Visite nuestra página de internet en: ...Para ordenar Comuníquese al 1-800-523-0852 fax:...

Visite nuestra página de internet en: www.apiint.com

Presentación

API International se enorgullece en anunciar que nuestra planta de Indiana esta

desde ahora registrada por: ISO 9001:2000 Certificada por Johnson Registrars. ISO 9001:2000, La calidad de estándares internacionales aceptada por la mayoría en el mundo, habla por sobre todo lo relacionado con actividades de calidad en una organización y ayuda a asegurarse que las necesidades de sus clientes sean satisfactorias.

Nuestro proceso de calidad esta basado con los cimientos de tres elementos claves: Alcanzando clase mundial con los estándares ISO 9001:200 como evidencia de nuestro compromiso, y apegándose a un sistema de manejo de negocios sin comprometer la calidad, y buscando siempre exceder las más altas expectativas de nuestros clientes. Nuestra certificación de 9001:2000 nos capacita para mejorar nuestro proceso, lo que se traduce en beneficios claves para nuestros clientes.

API se ha esforzado por mucho tiempo en establecer la reputación industrial en calidad y servicio, estamos muy orgullosos de haber obtenido el Registro ISO 9001: 2000 y continuaremos en el esfuerzo de brindarle a nuestros clientes la calidad y el servicio más alto en nuestra industria.

http://www.apiint.com/

Para ordenar

Comuníquese al 1-800-523-0852 fax: 503.692.4343

Corporate Office Indiana Branch Virginia Branch

12505 SW Herman Rd 6219 West Stoner Dr 3420 Pump Rd#121

Tualatin, OR. 97062 Greenfield, IN 46140 Richmond, VA 23233

Office: 503 692-3800 PH: 317-894-1100 Ph.: 804-360-7118

Fax: 503- 692-4343 Fax: 317-894-1200 Fax: 804-360-0406

ISO 9001: 2000 Registered

API International es una empresa líder global en la fabricación y negociación fundada en 1968

Calidad y servicio es como nosotros nos distinguimos de la competencia. En API International, nosotros estamos dedicados a servir a nuestros clientes con un personal altamente capacitado y una vasta experiencia además de la infraestructura en edificios y maquinaria de manufactura más moderna que nos facilita manejar cualesquier tipo de trabajo personalizado excediendo sus expectativas.

Los cimientos de nuestras capacidades esta en fabricar componentes en diferentes aleaciones diseñados exclusivamente para nuestros exigentes clientes.

Con una entrega rápida y nuestro equipo de diseño CAD, nosotros nos esmeramos por proveer a nuestros clientes con productos de calidad y precios competitivos.

Desde nuestras oficinas corporativas en

Oregon Con más de 90,000 sq/ft, y 25,000 sq/ft

En la planta de Indiana, API embarca diariamente

A todo el mundo. En API International el cliente esta

Primero y nos esmeramos por ofrecer el mejor servicio

De la industria.

API International, mantiene un gran inventario de bridas estándar y personalizada en una gran variedad de aleaciones, diseñadas para fabricantes de equipos originales (OEM), y distribuidores en industrias como: tratamientos de agua, irrigación, escape, HVAC, Petroquímicas, automotriz, maquinaria pesada, y torres de comunicación. API

también mantiene un extenso inventario de juntas de expansión, conexiones para bombas, cedazos exclusivos, válvulas e compuerta y de bola, y muchas otras cosas más. Todo esto lo tenemos en inventario en nuestras convenientes localidades, y bodegas para entregas y distribuciones rápidas para todos nuestros clientes.

Surtiendo productos de calidad diseñados para abastecer las demandantes

Aplicaciones industriales, se requiere dedicación, experiencia e innovación.

Desde 1968 API International a alcanzado y excedido esta expectativas

Por su constante desarrollo y superioridad en el proceso de producción de

Productos y la creciente demanda de nuestros clientes. Es una norma de

API International el diseñar, fabricar, comercializar y distribuir productos

Hechos con la mas alta calidad, que realizara con satisfacción su función para

La que fue diseñado, es el resultado de nuestra empresa al ser reconocido como

Un líder de calidad y prestigio en la industria. API se enorgullece de haber

Obtenido la certificación ISO 9001: 2000 en su sucursal en Indiana.

API cuenta con más de 35 años en el ramo industrial. Las oficinas corporativas

Ubicada en USA. Control de Calidad Inigualable, y sobre todo un precio razonable

Son el principal motivo por el que usted necesita de API International.

800-523-0852 WWW.APIINT.COM

API INTERNATIONAL0103API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 8

DC# 0910

Visit our web site at www.apiint.com

AWWA Flanges(Per AWWA C207/C228 Specifications)


TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 24

DC# 0910


Light Weight Steel &Stainless Steel Plate Flanges


TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 30

DC# 0910


Plate Steel & Raised FaceSlip-on Flanges

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

39DC# 0910


Exhaust Flanges

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

41DC# 0910


DIN (Metric) Flanges

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

43DC# 0910


Backing Flanges

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

47DC# 0910


Butterfly, Check, & Gate Valves(Ductile Iron/Cast Iron)


TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 52

DC# 0910


Construction & Functional CharacteristicsConstruction & Functional Characteristics

* Type: Class 125

Customer:

Project:

Engineer:

Architect:

PO#:

Working Pressure 200 psig

Test Pressures Shell: 350 psiSeat: 220 psi

Working Temperature 14°- 248° F

Pressure/Temperature RatingsPressure/Temperature Ratings

DimensionsDimensions

QTY Size

Face to FaceDimension

(A)

2” 8”

2-1/2 8-1/2

3 9-1/2

4 11-1/2

5 13

6 14

8 19-1/2

10 24-1/2

12 27-1/2

14 31

16 36

18 36

20 40

24 48

MaterialsMaterials

Part Material

Body Cast Iron - A126 Class B

Bonnet Cast Iron - A126 Class B

Disc Cast Iron - A126 Class B

Hanger Ductile Iron

Disc Ring Bronze - B62 C83600

Seat Ring Bronze - B62 C83600

Hanger Pin Stainless Steel

* Ends: ANSI 150# Drilled Flat Face Flanges

* Suitable for Water, Oil, & Gas

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

53DC# 0910


Customer:

Project:

Engineer:

Architect:

PO#:

Nominal Size All Sizes

Working Pressure 203 psi (to 210°F)

Test Pressure - Shell 406 psi

Test Pressure - Seat 406 psi

Minimum Working Temperature -20°F

Maximum Intermittent Temperature 210° F

Part Material

Body Ductile Iron or Grey Cast Iron

WedgeDuctile Iron or Grey Cast Iron - Coatedwith NBR

Bonnet Ductile Iron or Grey Cast Iron

Stem Stainless Steel - CR13

Stem Nut Brass

Handwheel Ductile Iron or Grey Cast Iron

O Ring & Gasket EPDM or NBR

QTY API Part# Size

Face to FaceDimension

(L)

HandwheelDiameter

(W)

ApproximateHeight in Closed

Position (H)

ApproximateHeight in OpenPosition (H1)

FlangeThickness

(T)Approximate

WeightGVFF-0200-O 2” 7.00” 7.00” 13.00” 15.13” 0.625” 40 lbs

GVFF-0250-O 2-1/2 7.50 7.00 13.75 16.50 0.688” 45

GVFF-0300-O 3 8.00 8.00 17.38 20.63 0.750 65

GVFF-0400-O 4 9.00 9.50 18.88 23.25 0.938 77

GVFF-0500-O 5 10.00 9.50 22.00 27.38 0.938 106

GVFF-0600-O 6 10.50 11.00 25.25 31.50 1.000 132

GVFF-0800-O 8 11.50 12.63 31.88 40.13 1.125 187

GVFF-1000-O 10 13.00 14.13 37.38 47.63 1.188 306

GVFF-1200-O 12 14.00 17.75 42.50 54.75 1.250 427

******

Type: Bolted Bonnet - Rising stem, outside screwed.

Stopper: Resilient Seat Gate.Ends: 150# Drilled Flange x Flange (to ANSI B16.1 Specifications).

Shutoff: Clockwise Direction.

Execution: Design & manufactured according to AWWA C509.Epoxy coated inside & outside.

*

**

**

*

DimensionsDimensions

Operating ConditionsOperating Conditions MaterialsMaterials

Construction & Functional CharacteristicsConstruction & Functional Characteristics

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

55DC# 0910


Brass Ball & Gate Valves


TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 56

DC# 0910


Pressure Test:Shell : 900 psi (Hydrostatic)Seat : 80 psi (Air)

MaterialsPart Material

Body Brass: HPb59-1

Bonnet Brass: HPb59-1

Ball Brass: ZcuZn40Pb2

Sealing Seat Teflon (PTFE SM031)

Stem Brass: HPb59-1

Handle Steel (Chrome Plated)

Nut Steel (Chrome Plated)

* Also available with a “T” handle.

L

HD

S

DimensionsQTY Part Number Size/Bore (D) Length (L) Height (H) Handle Length (S)

BRSBVFF0025 1/4” 1-5/8” 1-5/8” 3-1/8”

BRSBVFF0038 3/8 1-3/4 1-11/16 3-1/8

BRSBVFF0050 1/2 2-3/16 2-1/4 3-7/8

BRSBVFF0075 3/4 2-3/8 2-3/8 3-7/8

BRSBVFF0100 1 2-7/8 2-3/4 4-1/2

BRSBVFF0125 1-1/4 3-5/16 3 4-13/16

BRSBVFF0150 1-1/2 3-3/4 3-13/16 5-5/8

BRSBVFF0200 2 4-3/8 4-1/8 5-5/8

Ball valves are constructed with heavy-dutybrass.

Full-port design is rated at 600 W.O.G.non-shock, 150 psi saturated steam.

Blowout proof stem, threaded body cap andteflon seats are standard.

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

57DC# 0910


* Also available with a “T” handle.A

C

D

B

MaterialsPart Material

Body Brass: HPb59-1

Bonnet Brass: HPb59-1

Ball Brass: ZcuZn40Pb2

Sealing Seat Teflon (PTFE SM031)

Stem Brass: HPb59-1

Handle Steel (Chrome Plated)

Nut Steel (Chrome Plated)

Pressure Test:Shell : 900 psi (Hydrostatic)Seat : 80 psi (Air)

DimensionsQTY Part Number Size/Bore (B)* Length (A) Height (C) Handle Length (D)

BRSBVMF0050 1/2” 2-5/8” 2-1/4” 3-7/8”

BRSBVMF0075 3/4 2-13/16 2-3/8 3-7/8

“*” - Other sizes available upon special request.

Ball valves are constructed with heavy-dutybrass.

Full-port design is rated at 600 W.O.G.non-shock, 150 psi saturated steam.

Blowout proof stem, threaded body cap andteflon seats are standard.

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

59DC# 0910


Rubber/Teflon ExpansionJoints & Accessories

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

61DC# 0910


AMS-30 Series Single Sphere RubberExpansion Joints - 300# Flg x Flg

Features

Warning: Do not elongate rubber expansion joints when installing for suction service.

Dimension and Allowable Movements

Face to FaceQty API Part # Size Dimension Compression Elongation Lateral Angular

AMS204-30 4 6 .625 .375 .500 15AMS206-30 6 6 .625 .375 .500 15AMS208-30 8 6 .625 .375 .500 15AMS210-30 10 8 .625 .500 .750 15AMS212-30 12 8 .750 .500 .750 15AMS214-30 14 8 .750 .500 .750 15AMS216-30 16 8 .750 .500 .750 15

AMS201H-30 1 1/2” 6” .500” .375” .500” 15°AMS202-30 2 6 .500 .375 .500 15AMS202H-30 2 1/2 6 .500 .375 .500 15AMS203-30 3 6 .500 .375 .500 15

Allowable Motion Ratings*

- Expansion Joint bodies available in Neoprene, EPDM, Butyl(Chlorobutyl), NBR (Nitrile, Buna-N).

- Flanges available in other drillings and materials upon request.

Operating Conditions

Size Range 1-1/2” - 12” 14”-16”

Operating Pressure 213 psi 114 psi

Operating TempRange*

14°- 170°F (Neoprene)14°- 210°F (EPDM)

14°- 170°F (Neoprene)14°- 210°F (EPDM)

Vacuum Rating Contact API sales Contact API sales

Burst Pressure 853 psi 340

Operating pressures listed in the above table are for up to110 deg. F. (for Neoprene) , and 125 deg. F. (for EPDM).For elevated temperature service, please contact API Salesfor actual working pressure ratings.

Applications

Applicable for suction and delivery (discharge).Provides sound and vibration isolation.

Gaskets and packing are not required.Floating flanges allow for easy installation.

Prevents piping system and equipment breakdown by absorbing elongationand contraction caused by temperature variances.Absorbs water pulsation and minimizes water hammering.

**

**

*

*

Pumps & air compressors in air conditioning system & sanitaryequipment.Refrigeration systems and blowers in industrial plant equipment.

Feed-water and drainage equipment in marine piping systems.Applicable for use in power generation and chemical plants.

*

*

**

Standard 300# drilling on allflanges.

1 1/2” 6.13” 4.50” .875” 4

2” 6.50 5.00 .750 8

2 1/2” 7.50 5.88 .875 8

4” 10.00 7.88 .875 8

6” 12.50 10.62 .875 12

8” 15.00 13 1.000 12

10” 17.50 15.25 1.125 16

12” 20.50 17.75 1.250 16

14” 23.00 20.25 1.250 20

16” 25.50 22.50 1.380 20

3” 8.25 6.63 .875 8

SIZE Flg OD Bolt Cir Hole DIA # Holes

FLANGE DIMENSIONS 300# DRILLING

Temp. To Pressure Chart

MaterialsPart Part Description Material1 Flanges Mild Steel - Plated2 Reinforcing Wire Mild Steel

3 Tube Synthetic Rubber4 Cover Synthetic Rubber5 Reinforcing Cord Synthetic Fiber


TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 62

DC# 0910


“*” - Non Concurrent Ratings.

Features


* Applicable for suction and delivery (discharge).

* Designed for greater compression, elongation, and angular movement than thesingle sphere expansion joint.

* Excellent for absorbing thermal expansion and eliminating sound and vibration.* Gaskets and packing not required.

* Good electrical insulator.

* Absorbs water pulsation and minimizes water hammering.

Applications

* Pressure piping systems in building equipment and generalindustrial plants.

* Pump and turbine lines used for power generation plants,industrial machinery and universal pump blowers.

* Feed-water & drainage lines for waterworks & sanitary pipingsystems.

Customer:

Project:

Engineer:

PO#:

To be furnished with control units: _____ Yes _____ No

Face to FaceQty API Part # Size Dimension Compression Elongation Lateral Angular Compression Elongation Lateral Angular

AMT201H 1-1/2" 7" 1” 3/4" 1” 30° 1/4" 1/8" 5/16" 10°AMT202 2 7 1 3/4 1 30 1/4 1/8 5/16 10

AMT202H 2-1/2 7 1 3/4 1 30 1/4 1/8 5/16 10AMT203 3 7 1 3/4 1 30 1/4 1/8 5/16 10AMT204 4 9 1-3/8 1 1-1/4 30 1/4 1/8 5/16 10AMT205 5 9 1-3/8 1 1-1/4 30 1/4 1/8 3/8 10AMT206 6 9 1-3/8 1 1-1/4 30 1/4 1/8 3/8 10AMT208 8 13 1-3/4 1 1-1/2 30 1/4 1/8 1/2 10AMT210 10 13 1-3/4 1 1-1/2 30 1/4 1/8 1/2 10AMT212 12 13 1-3/4 1 1-1/2 30 1/4 1/8 1/2 10AMT214 14 13-3/4 1-3/4 1-1/4 1-1/2 20 1/4 1/8 5/16 10AMT216 16 13-3/4 1-3/4 1-1/4 1-1/2 20 1/4 1/8 5/16 10AMT218 18 13-3/4 1-3/4 1-1/4 1-1/2 20 1/4 1/8 5/16 10AMT220 20 13-3/4 1-3/4 1-1/4 1-1/2 20 1/4 1/8 5/16 10AMT224 24 13-3/4 1-3/4 1-1/4 1-1/2 20 1/4 1/8 1/2 10

Allowable Motion Ratings* Installation Tolerances

MaterialsOperating ConditionsSize Range 1-1/2” - 12” 14” - 24”

Operating Pressure 213 psi 114 psiOperating TempRange*

14°- 170°F (Neoprene)14°- 210°F (EPDM)

14°- 170°F (Neoprene)14°- 210°F (EPDM)


Burst Pressure 853 psi 340 psi

Part Part Description Material1 Flanges Mild Steel - Plated2 Reinforcement Fabric Nylon3 Reinforcing Wire Mild Steel4 Tube Synthetic Rubber5 Cover Synthetic Rubber6 Root Ring1 Carbon Steel


Flanges available in stainless steel and other drillings upon request.

“*” - Warning: Pressure & vacuum rating listed in the above table are for up to 110 deg. F.(for Neoprene) , and 125 deg. F. (for EPDM).For elevated temperature service, please contact API Sales for actualworking pressure ratings.Limit rods are required in systems that are unanchored and recommendedin all other applications.

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

63DC# 0910


- Expansion Joint bodies available in Neoprene, EPDM, Butyl(Chlorobutyl), NBR (Nitrile, Buna-N).

- Flanges available in other drillings and materials upon request.

Features



MaterialsPart Part Description Material

1 Flanges Mild Steel - Plated

2 Reinforcing Wire Mild Steel

3 Tube Synthetic Rubber

4 Cover Synthetic Rubber

5 Reinforcing Cord Synthetic Fiber

6 Root Ring Carbon Steel-Plated

“*” - Warning:

Applications


Gaskets and packing are not required.Floating flanges allow for easy installation.Prevents piping system and equipment breakdown by absorbing elongationand contraction caused by temperature variances.Absorbs water pulsation and minimizes water hammering.

**

***

*

Pumps & air compressors in air conditioning system & sanitaryequipment.Refrigeration systems and blowers in industrial plant equipment.

Feed-water and drainage equipment in marine piping systems.Applicable for use in power generation and chemical plants.

*

*

**

1 1/2” 6.13” 4.50” .875” 4

2” 6.50 5.00 .750 8

2 1/2” 7.50 5.88 .875 8

3” 8.25 6.63 .875 8

4” 10.00 7.88 .875 8

6” 12.50 10.62 .875 12

8” 15.00 13 1.000 12

10” 17.50 15.25 1.125 16

12” 20.50 17.75 1.250 16

14” 23.00 20.25 1.250 20

16” 25.50 22.50 1.380 20

SIZE Flg OD Bolt Cir Hole DIA # Holes

FLANGE DIMENSIONS 300# DRILLING

Control Rods should alwaysbe used for safety.

Standard 300# drilling on allflanges.

Temp. vs Pressure ChartOperating Conditions


Face to FaceQty API Part # Size Dimension Compression Elongation Lateral Angular

AMT204-30 4 9 2 1.38 1.57 30

AMT206-30 6 9 2 1.38 1.57 30

AMT208-30 8 13 2.38 1.38 1.38 30

AMT210-30 10 13 2.38 1.38 1.38 30

AMT212-30 12 13 2.38 1.38 1.38 20

AMT201H-30 1 1/2” 7” 2” 1.13” 1.75” 35°

AMT202-30 2 7 2 1.13 1.75 35

AMT202H-30 2 1/2 7 2 1.13 1.75 35

AMT214-30 14 13.75 1.56 1.12 1.12 20

AMT216-30 16 13.75 1.56 1.12 1.12 20

AMT203-30 3 7 2 1.38 1.75 35

Other sizes available upon request.

AMT-30 Series Twin Sphere RubberExpansion Joints - 300# Flg x Flg

Operating pressures listed in the above table are for up to110 deg. F. (for Neoprene) , and 125 deg. F. (for EPDM).For elevated temperature service, please contact API Salesfor actual working pressure ratings.

Size Range 1-1/2” - 12” 14”-16”

Operating Pressure 234 psi 114 psiOperating TempRange*

14°- 170°F (Neoprene)14°- 210°F (EPDM)

14°- 170°F (Neoprene)14°- 210°F (EPDM)


Burst Pressure 853 psi 340 psi


TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 64

DC# 0910



Face to Face ApproximateQty API Part # Size Dimension (L) Compression Elongation Lateral Angular Weight (lbs)

AMUE0075 3/4 8.00 .875 .250 .875 45 1.80AMUE0100 1 8.00 .875 .250 .875 45 2.75AMUE0125 1-1/4 8.00 .875 .250 .875 45 3.50

AMUE0150 1-1/2 8.00 .875 .250 .875 45 4.00AMUE0200 2 8.00 .875 .250 .875 45 5.00

AMUE0050 1/2” 8.00” .875” .250” .875” 45 Deg 1.50

Features* Efficient noise and vibration isolation.* Ability to absorb large displacement due to eccentric, axial, and angular

movement.* Applicable for both suction and discharge.

* Female Threaded Unions allow for easy installation.

Operating Conditions

Applications* Vibration isolation for small pumps and circular

pumps.

* Sewage disposal purifier line.

* Vibration isolation for air-conditioners and pipes.


1 Threaded Union Malleable Iron

2 Reinforcing Cloth Nylon Fabric3 Elastomer EPDM

Customer:

Project:

Engineer:

Architect:

PO#:

Operating Pressure 150 psiNormal Operating Temp. 14°- 158° FVacuum Rating 26" Hg

Burst Pressure 750 psi

“*” - Warning: Pressure & vacuum rating listed in the above table arefor up to 110 deg. F. (for Neoprene) , and 125 deg. F.(for EPDM). For elevated temperature service, pleasecontact API Sales for actual working pressure ratings.


Warning: Do not elongate rubber expansion joints when installing for suction service. “*” - Non Concurrent Ratings.

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

65DC# 0910


“**” - Non Concurrent Ratings.

Features* Working pressure ratings up to 200 psi*. Temperature ratings from 14°- 170°F.* Vacuum ratings to 26” Hg.

* Allows for greater motion capabilities than standard arch expansion joints.

* Excellent for absorbing thermal expansion, and eliminating vibration & sound.

* Gaskets and packing not required.* Absorbs water pulsation and protects against start-up surge forces.

Applications

Pressure piping systems in building equipment and generalindustrial plants.

Pump and turbine lines used for power generation plants,industrial machinery and universal pump blowers.

Feed-water & drainage lines for waterworks & sanitarypiping systems.

Oil pipelines for industrial plants and shipbuilding yards.Chillers & Cooling Towers.

Customer:

Project:

Engineer:

PO#:



1 Body/Flange Chlorobutyl (Butyl)

2 Reinforcement Nylon Tire Cord

3 Backup Rings Cast Ductile Iron


Face to Face WorkingQty API Part # Size Dimension Pressure (psi)* Compression Elongation Lateral Angular

AMS-602 2” 6” 200 1-3/4” 3/4” 3/4” 35 deg

AMS-602H 2-1/2 6 200 1-3/4 3/4 3/4 30AMS-603 3 6 200 1-3/4 3/4 3/4 30

AMS-604 4 6 200 1-3/4 3/4 3/4 25AMS-605 5 6 200 1-3/4 3/4 3/4 25

AMS-606 6 6 200 1-3/4 3/4 1 20AMS-608 8 6 180 1-3/4 3/4 1 20

AMS-610 10 8 180 1-3/4 3/4 1 15AMS-612 12 8 180 1-3/4 3/4 1 15

Allowable Motion Ratings**

“#” - Also available in EPDM.

*

*

*

**

“*” - Warning: Pressure & vacuum rating listed in the above table are for up to 110 deg. F. (for Neoprene) , and125 deg. F. (for EPDM).For elevated temperature service, please contact API Sales for actual working pressure ratings.Limit rods are required in systems that are unanchored and recommended in all other applications.


TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 66

DC# 0910



Face to FaceAPI Part # Size Dimension Max PSI Axial Comp Axial Ext Lateral Def Joint Rings (set)SF0200 2” 6” 225 1.75” 0.75” 0.75” ~4.0 lbs ~4.0 lbsSF0250 2-1/2 6 225 1.75 0.75 0.75 4.5 5.5SF0300 3 6 225 1.75 0.75 0.75 5.5 6.0SFO400 4 6 225 1.75 0.75 0.75 8.0 7.5SF0500 5 6 225 1.75 0.75 0.75 9.0 8.0SF0600 6 6 225 1.75 0.75 1.00 11 9.0SF0800 8 6 225 1.75 0.75 1.00 15 12SF1000 10 8 225 1.75 0.75 1.00 23 16SF1200 12 8 225 1.75 0.75 1.00 34 22SF1400 14 8 225 1.75 0.75 1.00 40 25SF1600 16 8 160 1.75 0.75 1.00 47 27SF1800 18 8 160 1.75 0.75 1.00 56 29SF2000 20 8 130 1.75 0.75 1.00 67 35

SF2400 24 10 130 1.75 1.00 1.00 79 46SF3000 30 10 100 1.75 1.00 1.00 117 58SF3600 36 10 100 2.25 1.00 1.00 143 99SF4200 42 12 90 2.25 1.00 1.00 193 110SF4800 48 12 90 2.25 1.00 1.00 211 154

Materials

FeaturesApplicable for suction and delivery (discharge).Provides sound and vibration isolation.

SF Expansion Joints have a 4 to 1 safety factor at rated operating temperaturesand pressures.

Prevents piping system and equipment breakdown by absorbing elongation andcontraction caused by temperature variances.

Optional materials include Neoprene, Chlorobutyl, Nitrile, Hypalon® and PTFE.


Operating ConditionsSize Range 2” - 14” 16” - 24”Operating Pressure 225 psi 160-130 psiOperating TempRange*

14°- 250°F (EPDM/Butyl)14°- 170°F (Neoprene)

14°- 240°F (EPDM/Butyl)14°- 170°F (Neoprene)

Vacuum Rating 26" Hg 26" HgBurst Pressure 900 psi 640 - 520 psi

Part Part Description Material1 Tube EPDM

2 Cover EPDM3 Reinforcing Cord Multiple plies of Polyester4 Reinforcing Wire Steel body wire

5 FlangesDouble reinforcedrubber

* Power generation, water and sewage treatment plants, Chemicalhandling, mining, pulp and paper and steel mills.

* Industrial pumps and compressors, sanitary equipment, marinepiping, blowers and refrigeration systems.

Customer:

Project:

Engineer:

PO#:



**

*

*

*

Applications

Allowable Motion Ratings** Weights

“*” - Warning: Expansion joints should always be installed using split steel retainingrings. Control units are required in unanchored piping systems and arerecommended in all other applications.

*Consult your API representative for proper recommendations for allpressure and temperature applications.

***Available by special order***

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

67DC# 0910


Features

Materials


DP-100 Expansion Joints have a 4 to 1 safety factor at rated operating temperaturesand pressures.

Prevents piping system and equipment breakdown by absorbing elongation and con-traction caused by temperature variances.

Optional cover materials include Neoprene, Nitrile, Hypalon® and Viton.


Face to FaceQty API Part # Size Dimension Max PSI Axial Comp Axial Ext Lateral Def Joint Rings (set)

DP0200 2” 6” 225 1.75” 0.75” 0.75” ~4.0 lbs ~4.0 lbsDP0250 2-1/2 6 225 1.75 0.75 0.75 4.5 5.5DP0300 3 6 225 1.75 0.75 0.75 5.5 6.0DPO400 4 6 225 1.75 0.75 0.75 8.0 7.5DP0500 5 6 225 1.75 0.75 0.75 9.0 8.0DP0600 6 6 225 1.75 0.75 1.00 11 9.0DP0800 8 6 225 1.75 0.75 1.00 15 12DP1000 10 8 225 1.75 0.75 1.00 23 16DP1200 12 8 225 1.75 0.75 1.00 34 22DP1400 14 8 225 1.75 0.75 1.00 40 25DP1600 16 8 160 1.75 0.75 1.00 47 27DP1800 18 8 160 1.75 0.75 1.00 56 29DP2000 20 8 130 1.75 0.75 1.00 67 35DP2400 24 10 130 1.75 1.00 1.00 79 46


Operating ConditionsSize Range 2” - 14” 16” - 24”Operating Pressure 225 psi 160-130 psiOperating TempRange*

14°to 400°F (PTFE/Butyl) 14°to 400°F (PTFE/Butyl)

Vacuum Rating 26" Hg 26" HgBurst Pressure 900 psi 640-520 psi

Part Part Description Material1 Tube PTFE2 Cover Butyl

3 Reinforcing Cord Multiple plies of Polyester4 Reinforcing Wire Steel body wire

5 Flanges Double reinforcedrubber

Customer:

Project:

Engineer:

PO#:


PTFE Teflon®

Allowable Motion Ratings**


**

*

*

*

* Power generation, water and sewage treatment plants,Chemical handling, mining, pulp and paper and steel mills.

* Industrial pumps and compressors, sanitary equipment, marinepiping, blowers and refrigeration systems.

Applications

Weights

“*” - Warning: Expansion joints should always be installed using split steel retainingrings. Control units are always required in un-anchored piping systemsand are recommended in all other applications.

*Consult your API representative for proper recommendations for allpressure and temperature applications.



TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 68

DC# 0910


Features High density for low permeability.

High tensile strength for greater working pressures. Low crystallinity for longer flex life. Material orientation for reduced stress concentrations and / or

premature fatigue failure. API PTFE expansion joints are available in 2,3,4,& 5 convolutions.

Dimension and Allowable Movements - (2 Convolutions)

Warning: Do not elongate expansion joints when installing forsuction service.

APPLICATIONS Power generation, Chemical handling, Food &

beverage, pulp and paper and steel mills, waterand sewage treatment plants mining.

MOLDED PTFE EXPANSION JOINTSAPI‘s molded expansion joints and flexible couplings were specially developed towithstand the higher pressures and temperatures in today’s piping systems. Eachmolded bellows contain the properties required for fatigue-proof operation.

Each PTFE expansion joint comes with metal flanges and tappedbolt holes that accommodate bolts in accordance with ANSI B16.5.Additional tapped holes are available for connectingCorning Style 11 flanges, by special order.

Note: Nom-Length is approximate and may vary.

Face to Face ASA Standard Tapped Holes Pressures PSIG @ ° FAPI Part # Size Nom. Length # Holes Thread B.C. 70 ° 175 ° 300 ° Flange O.D. Flare Face Flange Thk.

TEJ-2-201H 1-1/2 1.50 4 1/2-13 3.88 185 142 100 5.00 2.75 0.500TEJ-2-202 2 1.57 4 5/8-11 4.75 185 142 100 6.00 3.50 0.625

TEJ-2-202H 2-1/2 1.97 4 5/8-11 5.50 170 142 100 7.00 4.00 0.625TEJ-2-203 3 2.20 4 5/8-11 6.00 170 142 100 7.50 5.00 0.625

TEJ-2-204 4 2.36 8 5/8-11 7.50 170 128 100 9.00 6.00 0.625TEJ-2-205 5 2.76 8 3/4-10 8.50 170 142 100 10.00 7.00 0.750TEJ-2-206 6 2.99 8 3/4-10 9.50 185 142 100 11.00 8.00 0.750TEJ-2-208 8 2.99 8 3/4-10 11.75 185 142 85 13.50 10.25 0.875

TEJ-2-210 10 3.27 12 7/8-9 14.25 128 114 85 16.00 12.25 1.000TEJ-2-212 12 3.86 12 7/8-9 17.00 128 85 42 19.00 14.50 1.000

TEJ-2-201 1” 1.50” 4 1/2-13 3.13 185 142 100 4.25” 1.97” 0.500”

API Part # Size Axial LateralAngular w/

Rods(°)Compression

(LB/In)Extension

(LB/In)Lateral(LB/In)

Angular(Foot lbs/°) Weight

TEJ-2-201 1” 0.24” 0.08” 5 970.7 261.3 896.0 .78 ~3.3 lbsTEJ-2-201H 1-1/2 0.31 0.16 5 511.0 490.0 896.0 .92 3.74TEJ-2-202 2 0.40 0.24 5 600.7 524.4 961.3 1.21 5.28

TEJ-2-202H 2-1/2 0.43 0.24 5 483.6 198.5 1054.7 1.41 9.77

TEJ-2-203 3 0.43 0.28 5 483.6 549.8 1144.0 1.78 10.65TEJ-2-204 4 0.51 0.31 5 697.8 1046.8 686.0 5.13 18.74TEJ-2-205 5 0.59 0.31 5 1008.0 1138.7 1379.0 15.42 26.18TEJ-2-206 6 0.67 0.31 5 1139.8 678.6 1659.0 20.77 29.22

TEJ-2-208 8 0.67 0.31 5 1271.5 1940.2 2373.0 37.43 38.32TEJ-2-210 10 0.79 0.35 5 1433.6 1747.6 1711.0 48.70 57.60TEJ-2-212 12 0.79 0.35 4 1610.0 1713.6 2289.8 74.61 92.58

Allowable Motion Ratings** Spring Rates


API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

71DC# 0910


COMPLETE UNIT* EXP. JOINT GUSSET PLATE PLATE CONTROL APPROX.QTY API PART # SIZE APPLICATION PLATE PART# THK. WEIGHT ROD PART# WEIGHT

CRU0150 1-1/2” BOTH CRP0150 1/2” 0.8 CR0625-14S 6.4 lbs

CRU0200 2 BOTH CRP0200 1/2 1.0 CR0625-14S 7.2

CRU0250 2-1/2 BOTH CRP0250 1/2 1.3 CR0625-14S 8.4

CRU0300 3 BOTH CRP0300 1/2 1.6 CR0625-14S 9.6

CRUS0400 4 SINGLE CRP0400 1/2 1.4 CR0625-14S 8.8

CRUT0400 4 TWIN CRP0400 1/2 1.4 CR0625-17T 9.2


CRUT0500 5 TWIN CRP0500 1/2 1.5 CR0625-17T 9.6


CRUT0600 6 TWIN CRP0600 1/2 1.7 CR0625-17T 10.4


CRUT0800 8 TWIN CRP0800 1/2 2.1 CR0875-23T 17.6


CRUT1000 10 TWIN CRP1000 3/4 3.5 CR0875-23T 23.2


CRUT1200 12 TWIN CRP1200 3/4 5.0 CR1125-23T 36.0


CRUT1400 14 TWIN CRP1416 3/4 5.0 CR1125-23T 36.0


CRUT1600 16 TWIN CRP1416 3/4 5.0 CR1125-23T 36.0


CRUT1800 18 TWIN CRP1820 3/4 6.0 CR1125-23T 40.0


CRUT2000 20 TWIN CRP1820 3/4 6.0 CR1125-23T 40.0

CRUS2400 24 SINGLE CRP2400 1 7.5 CR1250-18S 47.0

CRUT2400 24 TWIN CRP2400 1 7.5 CR1250-23T 49.0

Customer:

Project:

Engineer:

Architect:

PO#:

“*”-

“**” -

Complete units consist of the following: 2 Rods; 4 Plates;8 Nuts; 8 Steel Washers; & 8 Neoprene Washers.

If needed, 3 or more rod sets are available upon request.

Sets are also available in Stainless Steel.

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

75DC# 0910


Pump Connectors


TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 76

DC# 0910


API OVERALL WORKING PRESSURE* FLANGE APPROX.QTY PART # SIZE LENGTH AT 70° F. AT 250° F. THICKNESS WEIGHT

PCF0200 2” 9” 300 (PSI) 276 (PSI) 5/8” 11 lbs

PCF0250 2-1/2 9 350 322 5/8 14

PCF0300 3 9 300 276 5/8 15

PCF0400 4 9 250 230 5/8 20

PCF0500 5 11 175 161 3/4 28

PCF0600 6 11 165 152 3/4 33

PCF0800 8 12 174 160 1 52

PCF1000 10 13 180 165 1 74

API OVERALL WORKING PRESSURE* APPROX.QTY PART # SIZE LENGTH AT 70° F. AT 250° F. WEIGHT

PCMMT0050 1/2” 6-1/2” 825 (PSI) 760 (PSI) 0.5 lbs

PCMMT0075 3/4 7 487 448 0.8

PCMMT0100 1 8 475 437 1.0

PCMMT0125 1-1/4 8-1/2 425 391 1.5

PCMMT0150 1-1/2 9 425 391 2.0

PCMMT0200 2 10-1/2 300 276 2.5

PCMMT0250 2-1/2 12 350 322 3.0

PCMMT0300 3 14 300 276 5.0

PCMMT0400 4 16 250 230 8.0

Customer:

Project:

Engineer:

Architect:

PO#:

Part MaterialHose 300 Series Stainless SteelBraid 300 Series Stainless SteelCollars 300 Series Stainless SteelEnds Male x Male NPT Steel

Part MaterialHose 300 Series Stainless SteelBraid 300 Series Stainless SteelCollar 300 Series Stainless SteelFlanges Steel

“*” For elevated temperature service (above 250 Deg. F.)please contact API Sales for actual working pressureratings.

Working pressure ratings may vary based on specificapplication. Above pressures are based on simplepump vibration in a static installation. For otherapplications, please contact API Sales.

Flanges - Class 150 (ANSI B16.5)Drilling

Male Pipe Threads - Sch 40Tapered (ANSI B1.20.1)

Pump Connectors are designed to absorb pump vibration, plus 1/8” misalignment.

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

77DC# 0910


API OVERALL APPROX.QTY PART # SIZE LENGTH WORKING BURST WEIGHT

PCFF0050-SCS 1/2” 6-1/2” 625 (PSI) 2500 (PSI) 0.3 lbs

PCFF0075-SCS 3/4 7 625 2500 0.5

PCFF0100-SCS 1 8 625 2500 0.7

PCFF0125-SCS 1-1/4 8-1/2 625 2500 0.9

PCFF0150-SCS 1-1/2 9 625 2500 1.3

PCFF0200-SCS 2 10-1/2 487 1950 1.9

PCFF0250-SCS 2-1/2 12 425 1700 3.1

PCFF0300-SCS 3 12 375 1500 4.5

PRESSURE RATINGS*(AT 70° F)

Part Material

Hose 300 Series Stainless Steel

Braid 300 Series Stainless Steel

Collars Copper or 300 Series Stainless Steel

Ends Copper

Female Copper Sweatends to fit copper pipe.

Customer:

Project:

Engineer:

Architect:

PO#:

“*” For elevated temperature service (above 70 Deg. F.) refer to Temperature Correction Chart.

Pressure ratings may vary based on specific application. Above pressures are based on simple pump vibration ina static installation. For other applications, please contact API Sales.

TEMPERATURE CORRECTIONFACTORS

Multiply Working Pressures@ 70o F. by Below Factors

TEMPERATURE FACTOR150o F 0.92200 0.89250 0.86300 0.83350 0.81400 0.78450 0.75

Pump Connectors are designed to absorb pump vibration, plus 1/8” misalignment.


TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 78

DC# 0910


Additional ItemsAdditional & Custom Items

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

79DC# 0910


Customer:

Project:

Engineer:

Architect:

PO#:

Materials

No. Description Material

1 Body Aluminum

2 O-Ring Neoprene

3 Ball Polypropylene

Ratings/Capacities

Size Max. OperatingPressure (psi)

Vent Capacity Vacuum Relief Capacity

2” 150 2.25” 1.75” Clear Opening

3” 100 3.45” 2.38” Clear Opening

Features* Precision ground solid float ball seats against an extra

thick precision O-ring providing a tight seal at very lowpressures.

* Air vents operate trouble-free up to 150 psi (for 2”) and100 psi (for 3”).

* Aerodynamic air-flow design assures maximum ventcapacity without premature closing.

* Material selection prevents “sticking” in the closedposition.

* End connection is with standard Female pipe threads.

UsesAV series aluminum air vents are used on gravity (or higher)pressure systems and are designed for evacuation of air whenfilling a pipe line. The air vents also provide positive vacuumrelief when draining the system.


TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 80

DC# 0910


Customer:

Project:

Engineer:

Architect:

PO#:

Materials

No. Description Material

1 Body Aluminum

2 Shaft Stainless Steel

3 Spring Tempered Steel

4 Seal Telfon

5 Bushings Teflon

Ratings/Capacities

Size Pressure Relief Settings Range

2” 80 psi

3” 80 psi

Features* Constructed from high strength aluminum castings with

stainless steel shaft, tempered steel spring, and non-sticking Teflon seal and bushings.

* Dependable, top spring design (out of flow) assureslonger & more accurate operation.

* Valves can be ordered factory set and sealed underactual hydrostatic conditions, or shipped for final fieldadjustment.

* End connection is with standard Female pipe threads.

UsesPRV series pressure relief valves are suitable for mostaluminum sprinklers and higher pressure plastic pipe.

* Factory set @ 80 psi. Other settings are available.

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

81DC# 0910


Materials

Part Material

Body Cast Iron

Part # A B C E F H I J K L M N O P R S T Weight

HB-A 4.19” .38-16 3.25” 2.75” 5.31” 0.50” 1.44” 2.50” 3.00” 5.00” 6.00” 2.00” 3.78” 0.59” 0.69” 0.50” 0.43” ~4 lbsHB-B 5.75 .50-13 4.00 3.63 7.12 0.50 1.44 2.88 3.38 5.75 6.75 2.00 3.77 0.59 0.69 0.50 0.43 5

HB-C 7.13 .62-11 5.00 4.31 8.50 0.62 2.00 4.63 5.22 9.25 10.44 3.00 5.18 0.75 0.75 0.68 0.69 12

NOTE: SAE-J744, 3 sizes for the same specification for Gear Pump,Vickers Piston Pump, or Vane Pump & Motors.


TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 82

DC# 0910


API strives to supply the highest qualityGaskets of all materials. Rubber NBR &BUNA, Teflon®, Viton, graphite, silicone,compressed sheet and spiral wounds.

Nominal PipeSize I.D.

(old style)

ANSISize I.D.

(new style)

OutsideDiameter

(OD)# of

HolesBolt HoleDiameter

BoltCircle

Diameter(BC)

OutsideDiameter

(OD)# of

HolesBolt HoleDiameter

BoltCircle

Diameter(BC)

125/150#Outside Diameter

(OD)

250/300# OutsideDiameter

(OD)

1/2" 0.878" 3.50" 4 .625" 2.375" 3.750" 4 .625" 2.625" 1.875" 2.125"

3/4" 1.062" 3.88" 4 .625" 2.750" 4.625" 4 .750" 3.250" 2.250" 2.625"

1" 1.313" 4.25" 4 .625" 3.125" 4.875" 4 .750" 3.500" 2.625" 2.875"

1 1/4" 1.683" 4.63" 4 .625" 3.500" 5.250" 4 .750" 3.875" 3.000" 3.250"

1 1/2" 1.943" 5.00" 4 .625" 3.875" 6.125" 4 .875" 4.500" 3.375" 3.750"

2" 2.375" 6.00" 4 .750" 4.750" 6.500" 8 .875" 5.000" 4.125" 4.375"

2 1/2" 2.875" 7.00" 4 .750" 5.500" 7.500" 8 .875" 5.875" 4.875" 5.125"

3" 3.500" 7.50" 4 .750" 6.000" 8.250" 8 .875" 6.625" 5.375" 5.875"

3 1/2" 4.000" 8.50" 8 .750" 7.000" 9.000" 8 .875" 7.250" 6.375" 6.500"

4" 4.500" 9.00" 8 .750" 7.500" 10.00" 8 .875" 7.875" 6.875" 7.125"

5" 5.563” 10.00" 8 .875" 8.500" 11.00" 8 .875" 9.250" 7.750" 8.500"

6" 6.625" 11.00" 8 .875" 9.500" 12.50" 12 .875" 10.63" 8.750" 9.875"

8" 8.650" 13.50" 8 .875" 11.75" 15.00" 12 1.000" 13.00" 11.00" 12.125"

10" 10.75" 16.00" 12 1.00" 14.25" 17.50" 16 1.125" 15.25" 13.38" 14.250"

12" 12.75" 19.00" 12 1.00" 17.00" 20.50" 16 1.250" 17.75" 16.13" 16.625"

14" 14.00" 21.00" 12 1.125" 18.75" 23.00" 20 1.250" 20.25" 17.75" 19.125"

16" 16.00" 23.50" 16 1.125" 21.25" 25.50" 20 1.375" 22.50" 20.50" 21.250"

18" 18.00" 25.00" 16 1.250" 22.75" 28.00" 24 1.375" 24.75" 21.63" 23.500"

20" 20.00" 27.50" 20 1.250" 25.00" 30.50" 24 1.375" 27.00" 23.88" 25.750"

22" 22.00" 29.50" 20 1.375" 27.25" 33.00" 24 1.625" 29.25" 26.00" 27.625"

24" 24.00" 32.00" 20 1.375" 29.50 36.00" 24 1.625" 32.00" 28.25" 30.500"

26" 26.00" 34.75" 24 1.375" 31.75 38.25" 28 1.750" 34.50" 30.50" 32.875"

28" 28.00" 36.50" 28 1.375" 34.00" 40.75" 28 1.750" 37.00" 32.75" 35.375"

30" 30.00" 38.75" 28 1.375" 36.00" 43.00" 28 1.875" 39.50" 34.75" 37.500"

32" 32.00" 41.75" 28 1.625" 38.50" 45.25" 28 2.000" 41.50" 38.00" 39.625"

34" 34.00" 43.75" 32 1.625" 40.50" 47.50" 28 2.000" 43.50" 39.00" 41.625"

36" 36.00" 46.00" 32 1.625" 42.75" 50.00" 32 2.125" 46.00" 41.25" 44.000"

38" 38.00" 48.75" 36 1.625" 45.25" 52.25" 3 2.250" 48.00" 43.63" 46.125"

40" 40.00" 50.75" 36 1.625" 47.25" 54.25" 36 2.250" 50.25" 45.63" 48.750"

42" 42.0" 53.00" 36 1.625" 49.50" 57.00" 36 2.250" 52.75" 48.00" 50.750"

44" 44.0" 55.25" 40 1.625" 51.75" 59.25" 36 2.250" 55.00" 50.13" 53.000"

46" 46.00" 57.25" 40 1.625" 53.75" 61.50" 40 2.250" 57.75" 52.13" 55.250"

48" 48.00" 59.50" 44 1.625" 56.00" 65.00" 40 2.250" 60.75" 54.50" 58.500"

► Dimensions per ANSI B 16.5 and AWWA C 110 standards for pipe flanges and gaskets.► Dimensional tolerances (unless otherwise stated): Up to 1 " @ + /- .0325"; 1.25" thru 12" @ +/- .0625"; 14" thru 24" @ +/- .0975"; 24" and above @ +/- .25".► Standard gasket material is SBR ( Red Rubber), but Neoprene, EPDM, Buna N, Silicone, Viton Teflon and other compounds are readily available.► Standard thicknesses are 1/16" and 1/8", but other thickness are available.

Full Face Gaskets - (125/150#) Full Face Gaskets - (250/300#) Ring Gaskets

Available in all materials

* Dimensions per ANSI B 16.5 and AWWA C110 standards for pipe flanges and gaskets.* Dimensional tolerances (unless otherwise stated): Up to 1" @ +/- .0325"; 1.25" thru 12" @ +/- .0625"; 14" thru 24" @ +/- .0975"; 24" and above @ +/- .25".* Standard gasket material is SBR (Red Rubber), but Neoprene, EPDM, Buna N, Silicone, Viton Teflon and other compounds are readily available.* Standard thicknesses are 1/16" and 1/8", but other thickness are available.

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

83DC# 0910


* The chemical guidelines in this table are offered as a general indication of the compatibility of variousmaterials with chemicals and fluids listed. Note when in doubt a sample of the compound should always

General Chemical Resistance

Common Name(s) Designation Composition General Properties Resistance to Attacked by:

Neoprene CR Chloroprene Good weatheringResistance and flameretarding. Good resis-tance to petroleumbased fluids.

Moderate chemicalsand acids, ozone, oils,fats, greases andmany solvents

Strong oxidizingacids, esters,ketones, chlorinated,aromatic and nitrohydrocarbons.

EPDM EPM Ethylene-propylen-diene-molimers

Excellent ozone,chemical and agingresistance. Excellentheat resistance. Poorresistance to petroleumbased fluids.

Heat, ozone, strongoxidizing chemicalsand acetone.

Petroleum basedfluids, animal fats,solvents andgreases.

Buna-N NBR Nitrile-butadiene Excellent resistanceto petroleum basedfluids. Good physicalproperties.

Many hydrocarbons,fats, oils, hydraulicfluids and chemicals.

Ozone (except PVCblends), ketones,esters, aldehydes,chlorinated and nitrohydrocarbons.

Silicones Q, Si Polysiloxane Excellent high and lowtemperature properties.Good oil resistance.FDA compound. Goodphysical properties.

Moderate chemicalsand acids, ozone, oils,fats, greases andconcentrated sodiumhydroxide.

Many solvents, higharomatic hydrocar-bons, concentratedacids, dilute sodiumhydroxide.

SBR( Red Rubber)

SBR Styrene- butadiene Good physical proper-ties and abrasionresistance. Poor resis-tance to petroleumbased fluids.

Most moderatechemicals wet or dry,organic acids,alcohols, ketonesand aldehydes.

Ozone, strong acids,animal fats, oils,greases and mosthydrocarbons.

Viton(Flouro-elastomer)

FPM Hexafluoropropylene-vinylidene flouride

Excellent oil and airresistance at low andhigh temperatures.Excellent chemicalresistance.

All aliphatic, aromaticand halogenatedhydrocarbons, acids,animal and vegetableoils.

Ketones, lowmolecular weightesters and nitrocontainingcompounds

Teflon®(Flourocarbon

resin)

TFE Polytetra-flouroethylene

Excellent chemical andsolvent resistance.Resistant to very hightemperatures.

Inert to mostchemicals, smoothanti-adhesive surface.Easily cleaned.

Acetates, NA-K andsome amino acids.

Non-Asbestos NA Aramid fiber andsynthetic fibers

bonded with NBR.

General servicewater & oil gasket.Pressures to 1595 psi,Temp to 750o F.

Mild acids, Alkalis,Oils, general chemi-cals & petroleumderivatives andsteam.

Consult customerservice for chemicalcompatibility.


TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 84

DC# 0910


84

COMPONENTS FOR WIND TOWERS, HEAT EXCHANGERS,SHIP-BUILDING, & TURBINE POWER GENERATORS

API International, Inc. is a global manufacturing and tradingcompany founded in 1968. Our mission is to streamline an OEM’s orfabricator’s production process by providing them with customfabricated products. We are a high quality supplier of variouscastings, forgings, and custom fabricated components for manyindustries specializing in high precision - large diameter flanges, rings,plates, gears, shafts, and other custom fabricated components.

* Bottom, Middle, Top Flanges

* Base Plates

* Embedment Rings

* Stud Bolts & Nuts

* Gear Rims & Shafts

OTHER COMPONENTS:

* Crane Wheels, Gears, Shafts,Impeller-Hubs for HeavyIndustrial applications.

* Piston Crowns, CylinderCovers, Intermediate Shafts,etc. for Ship-Building.

* Inner Web, Outer Rings(Diaphragms), etc. for TurbinePower Generators.

* Other standard/special forgedproducts.

WIND TOWER COMPONENTS:

API INTERNATIONAL

TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343

85DC# 0910


* Forging Capability:Max OD: 5,000mmMax Weight: 8,000 kgs

* Ring Capability:OD: Min 900-Max 5000mmID: Min 800-Max 4500mmThk: Min 50-Max 500mmWeight: Min 50-Max 500kgs

* Heat Treatment:Available for annealing,quenching, tempering andNormalizing.

Production Equipment/Capabilities

* Impact Tester* Tensile Tester

* Ultrasonic Tester* Hardness Testers

* Chemical Analysis* Microstructure

Classification Material SpecificationCarbon Steel S45C

Alloy Steel SCM, SNB, B7, L7, SNCM, Inconel, Monel

High Temperature Alloy Steel Alloy 660, UNS N08367

Stainless Steel B8,B8 CL2, B8M, B8M CL2, 304, 304L, 316, 316L, 321

High Temperature Corrosion Resistant Steel 45CrSi 9.3, SnCrW (DIN), SUH1, SUH3, SUH35, SUH37 (JIS)

Super Alloy Steel NIMONIC 80A

High Temperature Super Corrosion ResistantSteel Co-base: Stellite #6, #12, #F

Induction Hardened Alloy Steel 50 CrMo4 (DIN), SCM 445 (JIS)


TO ORDERCALL: 1-800-523-0852 FAX: 503-692-4343 86

DC# 0910


API International specializes in custom OEM products -manufactured to the customers specifications. We can helpthe OEM by sourcing their design, inventorying the productand delivering the product when required. Products may befabricated from any material such as Carbon Steel, StainlessSteel, Aluminum, Brass, Bronze, Ductile Iron, Cast Iron,Nylon, Rubber and Plastic.

All you need to do is send us your drawing and give us theopportunity to save you money.

From the simplest to the most complicated, API can produce it for you.

Visite nuestra página de internet en: ...Para ordenar Comuníquese al 1-800-523-0852 fax:...

Documents

Transcript of Visite nuestra página de internet en: ...Para ordenar Comuníquese al 1-800-523-0852 fax:...