Ventilador DAYTON3
-
Upload
rilfcher-car -
Category
Documents
-
view
224 -
download
0
Transcript of Ventilador DAYTON3
8/3/2019 Ventilador DAYTON3
http://slidepdf.com/reader/full/ventilador-dayton3 1/2
Features
• PSC motor
• Baked enamel Gray finish
• Heavy gauge steel housing
• All position Mounting
• Maximum Ambient Temperature
104°F
• Suitable for 50Hz operation
Additional Benefits
• Permanently Lubricated Ball-Bearings
• Extruded Aluminum Blower Frame
for Increased Rigidity
• Auto-Thermal Protection
Dayton® PSC andShaded Pole Blowers
Specification Sheet 1TDR8
Description
Dayton PSC and Shaded Pole blowers provide economical air delivery for general
heating, cooling, ventilating, or component cooling. Typical applications include
cooling greenhouses, blowers for wood and corn stoves, ventilating small buildings,
cooling electrical enclosures and removing heat from machinery. The blowers
are exact replacements for many OEM blowers with the same physical footprint.
Forward curve wheels driven by Dayton motors are rated for continuous duty
with all-position mount. These units incorporate balanced ball or sleeve-bearing
motors with cast aluminum end shields. This provides greater heat dissipation
and protection, reducing down time due to component failure and accidentaldamage. Direct drive blower wheels are dynamically balanced to reduce noise
and vibration and to maintain CFM at higher static pressures.
Dimensions
in. (mm)
1TDR8* 358 350 330 310 300 280 258 235 180 230 0.54 60
ReferenceNumber CFM @0″ 0.1″ 0.2″ 0.3″ 0.4″ 0.5″ 0.6″ 0.7″ 0.8″ VOLTS AMPS HZ
* Replaces 2C917
NOTE: Includes Conduit Box with 12″ Lead Length.
NOTE: Not suitable for use with speed-controlled devices.
1 1 . 1 6 4
( 2 8 3
. 5 6 )
10.436(265.07)
Ø5.358(136.00)
7.480(190)
Ø 4 . 4 5
2
( 1 1 3 . 0
0 )
4 . 1
5 4 ( 1 0 5 . 5
)
3.858(98)
5 . 6
3 0 ( 1 4 3 )
Specifications
0 2.26 4.53 6.8 9.06 11.33
0 80 160 240 320 400
(CMM
(CFM)
(inwg) (MMAq)
60HZ
1.2
0.96
0.72
0.48
0.24
0
30.48
24.38
18.29
12.18
6.10
0
Ø0.280(7.1)
5.079 (129)
4.488 (144)
1 1 .
8 2 3
( 3 0 0
. 3 1 )
5 . 0
0 0 ( 1 2 7 )
CAP
E47479Motor Component Recognition
8/3/2019 Ventilador DAYTON3
http://slidepdf.com/reader/full/ventilador-dayton3 2/2
Specification Sheet
Manufactured for Dayton Electric Mfg. Co.Niles, Illinois 60714 U.S.A.
1TDR8
DISCLAIMER. Dayton has made a diligent effort to provide product information and illustrate the products in this literature
accurately; however, such information and illustrations are for the sole purpose of identification, and do not express or imply
a warranty that the products are MERCHANTABLE, or FIT FOR A PARTICULAR PURPOSE, or that the products will necessarily conform to the illustrations or descriptions.
PRODUCT SUITABILITY. Many jurisdictions and localities have codes and regulations governing sales, construction,
installation, and/or use of products for certain purposes, which may vary from those in neighboring areas. While Dayton
attempts to assure that its products comply with such codes, it cannot guarantee compliance, and cannot be responsible
for how the product is installed or used. Before purchase and use of a product, review the product applications, and all
applicable national and local codes and regulations, and be sure that the product, installation, and use will comply with them.
Dayton® PSC and Shaded PoleBlowers
Notes
Mark: Submitted By:
Project: Date:
Location: