VDE Pr - CONQUER FUSE fuses: pigtail leads 4 - 6.3 500Vdc 500 8 - 12 500Vac 100 8 - 12 500Vdc 500...
Transcript of VDE Pr - CONQUER FUSE fuses: pigtail leads 4 - 6.3 500Vdc 500 8 - 12 500Vac 100 8 - 12 500Vdc 500...
VDE Prüf- und ZertifizierungsinstitutGutachten mit Fertigungsüberwachung
Ausweis-Nr. /Certificate No.
40017118
Blatt /Page
2
Name und Sitz des Genehmigungs-Inhabers / Name and registered seat of the Certificate holder
Conquer Electronics Co., Ltd., No. 15 Lane 120, Li Te Road, 11268 PEI TOU, TAIPEI, TAIWAN
Aktenzeichen / File ref. letzte Änderung / updated Datum / Date
2292900-1170-0009 / 184155 / CC2 / EUL 2013-06-14 2006-03-14
Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr. 40017118.This supplement is only valid in conjunction with page 1 of the Certificate of Conformity with factory surveillance No.40017118.
KleinstsicherungseinsatzSub-miniature fuse-linkMST seriesTyp(en) / Type(s)
MST series
BemessungsspannungRated voltage
AC 250 V
BemessungsstromRated current
40 mA; 50 mA
63 mA; 80 mA; 100 mA; 125 mA;160 mA; 200 mA; 250 mA; 315 mA;400 mA; 500 mA; 630 mA; 800 mA:1 A; 1,25 A; 1,6 A; 2 A; 2,5 A;3,15 A; 4 A; 5 A; 6,3 A
Normblatt IVmit Ausnahme der Abmessungen
Standard sheet with exception of the dimensions
Kennzeichnung der CharakteristikCharacteristic symbol
T
BemessungsschaltvermögenRated switching capacity
35 A (</= 3,15 A)10 x In (>3,15 A)
VDE Prüf- und Zertifizierungsinstitut GmbH * Testing and Certification Institute A__________________________________________________________________________________Merianstrasse 28, D-63069 Offenbach Phone +49 (0) 69 83 06-0
Telefax +49 (0) 69 83 06-555
VDE Prüf- und ZertifizierungsinstitutGutachten mit Fertigungsüberwachung
Ausweis-Nr. /Certificate No.
40017118
Blatt /Page
3
Name und Sitz des Genehmigungs-Inhabers / Name and registered seat of the Certificate holder
Conquer Electronics Co., Ltd., No. 15 Lane 120, Li Te Road, 11268 PEI TOU, TAIPEI, TAIWAN
Aktenzeichen / File ref. letzte Änderung / updated Datum / Date
2292900-1170-0009 / 184155 / CC2 / EUL 2013-06-14 2006-03-14
Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr. 40017118.This supplement is only valid in conjunction with page 1 of the Certificate of Conformity with factory surveillance No.40017118.
Anmerkung Die Anforderungen für die Bemessugnsströme 5 A und 6,3 Awaren die gleichen wie für 4 A
Remark The requirements of the rated currents 5 A und 6,3 A were thesame as of 4 A
__________________________________________________________________________________
Dieser Zeichengenehmigungs-Ausweis bildet eine Grundlage für die EG-Konformitätserklärung undCE-Kennzeichnung durch den Hersteller oder dessen Bevollmächtigten und bescheinigt die Konformität mit dengrundlegenden Schutzanforderungen der EG-Niederspannungsrichtlinie 2006/95/EG mit ihren Änderungen.This Marks Approval is a basis for the EC Declaration of Conformity and the CE Marking by the manufacturer orhis agent and proves the conformity with the essential safety requirements of the EC Low-Voltage Directive2006/95/EC including amendments.
VDE Prüf- und Zertifizierungsinstitut GmbHVDE Testing and Certification InstituteFachgebiet CC2Section CC2
VDE Prüf- und Zertifizierungsinstitut GmbH * Testing and Certification Institute A__________________________________________________________________________________Merianstrasse 28, D-63069 Offenbach Phone +49 (0) 69 83 06-0
Telefax +49 (0) 69 83 06-555
VDE Prüf- und ZertifizierungsinstitutGutachten mit Fertigungsüberwachung
Ausweis-Nr. /Certificate No.
40017118
Beiblatt /Supplement
Name und Sitz des Genehmigungs-Inhabers / Name and registered seat of the Certificate holder
Conquer Electronics Co., Ltd., No. 15 Lane 120, Li Te Road, 11268 PEI TOU, TAIPEI, TAIWAN
Aktenzeichen / File ref. letzte Änderung / updated Datum / Date
2292900-1170-0009 / 184155 / CC2 / EUL 2013-06-14 2006-03-14
Dieses Beiblatt ist Bestandteil des Gutachtens mit Fertigungsüberwachung Nr. 40017118.This supplement is part of the Certificate of Conformity with factory surveillance No. 40017118.
KleinstsicherungseinsatzSub-miniature fuse-linkMST series
Fertigungsstätte(n)Place(s) of manufacture
Referenz/Reference30016828
Conquer ElectronicsCo., Ltd.No. 26 Wucyuan 5th RoadWugu Township248 TAIPEI COUNTYTAIWAN
Referenz/Reference30002671
Conquer ElectronicsCo., Ltd.No. 15 Lane 120, Li Te Road11268 PEI TOU, TAIPEITAIWAN
VDE Prüf- und Zertifizierungsinstitut GmbHVDE Testing and Certification InstituteFachgebiet CC2Section CC2
VDE Prüf- und Zertifizierungsinstitut GmbH * Testing and Certification Institute A__________________________________________________________________________________Merianstrasse 28, D-63069 Offenbach Phone +49 (0) 69 83 06-0
Telefax +49 (0) 69 83 06-555
VDE Prüf- und ZertifizierungsinstitutGutachten mit Fertigungsüberwachung
Ausweis-Nr. /Certificate No.
40017118
Infoblatt /Info sheet
0
Name und Sitz des Genehmigungs-Inhabers / Name and registered seat of the Certificate holder
Conquer Electronics Co., Ltd., No. 15 Lane 120, Li Te Road, 11268 PEI TOU, TAIPEI, TAIWAN
Aktenzeichen / File ref. letzte Änderung / updated Datum / Date
2292900-1170-0009 / 184155 / CC2 / EUL 2013-06-14 2006-03-14
Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr. 40017118.This supplement is only valid in conjunction with page 1 of the Certificate of Conformity with factory surveillance No.40017118.
Genehmigung zum Benutzen des auf Seite 1 abgebildeten markenrechtlich geschützten Zeichens desVDE:
Grundlage für die Benutzung sind die Allgemeinen Geschäftsbedingungen (AGB) der VDE Prüf- undZertifizierungsinstitut GmbH (www.vde.com\AGB-Institut). Das Recht zur Benutzung erstreckt sich nur auf diebezeichnete Firma mit den genannten Fertigungsstätten und die oben aufgeführten Produkte mit denzugeordneten Bezeichnungen. Die Fertigungsstätte muss so eingerichtet sein, dass eine gleichmäßigeHerstellung der geprüften und zertifizierten Ausführung gewährleistet ist.Die Genehmigung ist so lange gültig wie die VDE-Bestimmungen gelten, die der Zertifizierung zu- grundegelegen haben, sofern sie nicht auf Grund anderer Bedingungen aus der VDE Prüf- und Zertifizierungsordnung(PM102) zurückgezogen werden muss.Der Gültigkeitszeitraum einer VDE-GS-Zeichengenehmigung kann auf Antrag verlängert werden. Beigesetzlichen und / oder normativen Änderungen kann die VDE-GS-Zeichengenehmigung ihre Gültigkeit zueinem früheren als dem angegebenen Datum verlieren.Produkte, die das Biozid Dimethylfumarat (DMF) enthalten, dürfen gemäß der Kommissionsent- scheidung2009/251/EG nicht mehr in den Verkehr gebracht oder auf dem Markt bereitgestellt werden.Der VDE-Zeichengenehmigungsausweis wird ausschließlich auf der ersten Seite unterzeichnet.
Approval to use the legally protected Mark of the VDE as shown on the first page:Basis for the use are the general terms and conditions of the VDE Testing and Certification Institute(www.vde.com\terms-institute). The right to use the mark is granted only to the mentioned company with thenamed places of manufacture and the listed products with the related type references. The place of manufactureshall be equipped in a way that a constant manufacturing of the certified construction is assured. The approval is valid as long as the VDE specifications are in force, on which the certification is based on,unless it is withdrawn according to the VDE Testing and Certification Procedure (PM102E).The validity period of a VDE-GS-Mark Approval may be prolonged on request. In case of changes in legal and /or normative requirements, the validity period of a VDE-GS-Mark Approval may be shortened.Products containing the biocide dimethylfumarate (DMF) may not be marketed or made available on the ECmarket according to the Commission Decision 2009/251/EC.The approval is solely signed on the first page.
Fuses, Supplemental - Component
Supplemental fuses
JDYX2.E82636
Fuses, Supplemental - Component Page Bottom
See General Information for Fuses, Supplemental - Component
CONQUER ELECTRONICS CO LTD E82636
26 WUCYUAN 5TH RD
WUGU
NEW TAIPEI, 248 TAIWAN
Cat. No.
Size
mm(in)
Amps
(A)
Volts
(V)
Interrupting Rating
(A)
CQ40LF 10.1 x 3.12 x 1.25
(0.40 x 0.12 x 0.05)
1 - 30 600Vac 150
1 - 30 350Vdc 150
CQ40LT 10.1 x 3.12 x 1.25
(0.40 x 0.12 x 0.05)
0.5 - 30 600Vac 150
0.5 - 30 350Vdc 150
0.5 - 30 60Vdc 600
40 60Vdc 600
MEF 8.35 x 7.7
(0.33 x 0.30)
0.05 - 3.15 277Vac 35
4.0 - 5.0 277Vac 10x Ampere rating
6.3 277Vac 10x Ampere rating
MET 8.35 x 7.7
(0.33 x 0.30)
0.04 - 3.15 277Vac 35
4.0 - 5.0 277Vac 10x Ampere rating
6.3 277Vac 10x Ampere rating
UBM 5.2 x 20
(0.20 x 0.79)
0.063 - 3.15 250Vac 1500
4 - 6.3 250Vac 1500
8 - 10 250Vac 1500
UDA 5.2 x 20
(0.20 x 0.79)
0.5 - 0.8 250Vac 1500
1 - 3.15 250Vac 1500
4 - 10 250Vac 1500
10.1 - 12 250Vac 1500
12.1 - 16 250Vac 500
16.1 - 20 250Vac 400
20.1 - 25 250Vac 300
UDE 5.2 x 20
(0.20 x 0.79)
0.5 - 0.8 500Vac 100
0.5 - 0.8 500Vdc 1500
1 - 3.15 500Vac 100
1 - 3.15 500Vdc 1500
4 - 6.3 500Vac 100
Page 1 of 10JDYX2.E82636 - Fuses, Supplemental - Component
2013/7/5http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...
Supplemental fuses: pigtail leads
4 - 6.3 500Vdc 500
8 - 12 500Vac 100
8 - 12 500Vdc 500
12.1 - 25 500Vac 100
12.1 - 25 500Vdc 400
UFE 5.2 x 20
(0.20 x 0.79)
0.063 - 0.1 250Vac 35
0.125 - 3.15 250Vac 35
4.0 - 6.3 250Vac 100
8.0 - 10.0 250Vac 100
USL 5.2 x 20
(0.20 x 0.79)
0.063 - 0.1 250Vac 35
0.125 - 0.4 250Vac 35
UTE 5.2 x 20
(0.20 x 0.79)
0.5 - 3.15 250Vac 35
4.0 - 6.3 250Vac 100
8.0 - 10.0 250Vac 100
UTE (11-16A) 5.2 x 20
(0.20 x 0.79)
11 - 15 250Vac 100
16 250Vac 63
Cat. No.
Size
mm(in)
Amps
(A)
Volts
(V)
Interrupting Rating
(A)
ABE (20.1A - 40A) 6.35 x 31.75
(0.25 x 1.25)
20.1 - 30 250Vac 100
20.1 - 30 125Vac 1000
20.1 - 30 125Vdc 400
20.1 - 30 75Vdc 1000
30.1 - 40 250Vac 1000
30.1 - 40 150Vdc 400
ABP (20.1A - 30A) 6.35 x 31.75
(0.25 x 1.25)
20.1 - 30 250Vac 100
20.1 - 30 125Vac 1000
20.1 - 30 125Vdc 400
20.1 - 30 75Vdc 1000
UBM-P 5.2 x 20
(0.20 x 0.79)
0.5 - 4 250Vac 1500
4.1 - 6.3 250Vac 1500
8 - 10 250Vac 1500
UBP, UBM-A 5.2 x 20
(0.20 x 0.79)
0.063 - 3.15 250Vac 1500
4 - 6.3 250Vac 1500
8 - 10 250Vac 1500
UDA-A 5.2 x 20
(0.20 x 0.79)
0.5 - 0.8 250Vac 1500
1 - 3.15 250Vac 1500
4 - 10 250Vac 1500
10.1 - 12 250Vac 1500
12.1 - 16 250Vac 500
16.1 - 20 250Vac 400
Page 2 of 10JDYX2.E82636 - Fuses, Supplemental - Component
2013/7/5http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...
Supplemental fuses: pigtail leads, cartridge enclosed
20.1 - 25 250Vac 300
UDA-P 5.2 x 20
(0.20 x 0.79)
0.5 - 0.8 250Vac 1500
0.81 - 3.15 250Vac 1500
3.16 - 6.3 250Vac 1500
6.31 - 10 250Vac 1500
UDE-A 5.2 x 20
(0.20 x 0.79)
0.5 - 0.8 500Vac 100
0.5 - 0.8 500Vdc 1500
1 - 3.15 500Vac 100
1 - 3.15 500Vdc 1500
4 - 6.3 500Vac 100
4 - 6.3 500Vdc 500
8 - 12 500Vac 100
8 - 12 500Vdc 500
12.1 - 25 500Vac 100
12.1 - 25 500Vdc 400
UDP 5.2 x 20
(0.20 x 0.79)
0.5 - 0.8 250Vac 1500
1.0 - 3.15 250Vac 1500
4.0 - 10 250Vac 1500
UFP. UFE-A 5.2 x 20
(0.20 x 0.79)
0.063 - 0.1 250Vac 35
0.125 - 3.15 250Vac 35
4.0 - 6.3 250Vac 100
8.0 - 10.0 250Vac 100
USP, USL-A 5.2 x 20
(0.20 x 0.79)
0.063 - 0.1 250Vac 35
0.125 - 0.4 250Vac 35
UTE-P 5.2 x 20
(0.20 x 0.79)
0.5 - 3 250Vac 35
4.0 - 6.3 250Vac 10x Ampere rating
8.0 - 10 250Vac 10x Ampere rating
UTP, UTE-A 5.2 x 20
(0.20 x 0.79)
0.5 - 3.15 250Vac 35
4.0 - 6.3 250Vac 100
8.0 - 10.0 250Vac 100
UTP, UTE-A (11-16A) 5.2 x 20
(0.20 x 0.79)
11 - 15 250Vac 100
16 250Vac 63
Cat. No.
Size
mm(in)
Amps
(A)
Volts
(V)
Interrupting Rating
(A)
ABB-A 6.35 x 32
(0.25 x 1.26)
1.0 - 20.0 500Vac 200
21.0 - 30.0 500Vac 100
1.0 - 20.0 500Vdc 200
21.0 - 30.0 500Vdc 100
ADP 6.35 x 31.8
(0.25 x 1.25)
8.1 - 30 32Vac 1000
Page 3 of 10JDYX2.E82636 - Fuses, Supplemental - Component
2013/7/5http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...
Supplemental fuses: pigtail leads, filled-tube
Supplemental fuses: pigtail leads, filled-tube, cartridge enclosed
8.1 - 30 250Vac 200
AFP 6.35 x 31.8
(0.25 x 1.25)
12 - 30 250Vac 100
12 - 30 125Vac 200
12 - 30 32Vac 300
GBF-A 5.2 x 20
(0.20 x 0.79)
1.0 - 20.0 250Vac 200
PGU 3.9 x 11
(0.15 x 0.43)
0.25 - 6.3 250Vac 35
0.25 - 6.3 250Vac 10x Ampere rating
SDL-A 4.6 x 14.5
(0.18 x 0.57)
3.75 - 8.0 250Vac 200
SDP 4.6 x 14.5
(0.18 x 0.57)
3.75 - 8.0 250Vac 200
SMP 4.6 x 14.5
(0.18 x 0.57)
0.01 - 8.0 350Vac 100
0.01 - 3.5 140Vdc 100
UDL-A 5.2 x 20
(0.20 x 0.79)
0.5 - 6.3 250Vac 150
Cat. No.
Size
mm(in)
Amps
(A)
Volts
(V)
Interrupting Rating
(A)
ABE (15.1A - 20A) 6.35 x 31.75
(0.25 x 1.25)
15.1 - 20 250Vac 750
15.1 - 20 125Vac 10000
15.1 - 20 250Vdc 750
ABE-A 6.35 x 31.75
(0.25 x 1.25)
15.1 - 20.0 250Vac 750
15.1 - 20.0 125Vac 10000
15.1 - 20.0 250Vdc 750
ABP (15.1A - 20A) 6.35 x 31.75
(0.25 x 1.25)
15.1 - 20 250Vac 750
15.1 - 20 250Vdc 750
15.1 - 20 125Vac 10000
PBU-P 3.59 x 90
(0.14 x 3.54)
0.5 - 3.15 250Vac 35
4 - 6.3 250Vac 10x Ampere rating
Cat. No.
Size
mm(in)
Amps
(A)
Volts
(V)
Interrupting Rating
(A)
ADA 6.35 x 31.8
(0.25 x 1.25)
20.1 - 30 125Vac 10000
20.1 - 30 250Vac 1500
20.1 - 30 125Vdc 10000
APA, ADA-A 6.35 x 31.8
(0.25 x 1.25)
15.1 - 20 125Vac 10000
15.1 - 20 250Vac 400
20.1 - 30 125Vac 10000
20.1 - 30 250Vac 1500
20.1 - 30 125Vdc 10000
UBM-A 5.2 x 20
(0.20 x 0.79)
0.5 - 4 277Vac 1500
Page 4 of 10JDYX2.E82636 - Fuses, Supplemental - Component
2013/7/5http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...
Supplemental fuses: cartridge enclosed
Supplemental fuses: filled-tube
Supplemental fuses: filled-tube, surface mount
5 - 6.3 277Vac 1500
8 - 10 277Vac 1500
12.5 - 16 277Vac 1500
Cat. No.
Size
mm(in)
Amps
(A)
Volts
(V)
Interrupting Rating
(A)
ABB 6.35 x 32
(0.25 x 1.26)
1.0 - 20.0 500Vac 200
21.0 - 30.0 500Vac 100
1.0 - 20.0 500Vdc 200
21.0 - 30.0 500Vdc 100
ADL 6.35 x 31.8
(0.25 x 1.25)
8.1 - 30 32Vac 1000
8.1 - 30 250Vac 200
AFE 6.35 x 31.8
(0.25 x 1.25)
12 - 30 250Vac 100
12 - 30 125Vac 200
12 - 30 32Vac 300
AUE 10.3 x 38.1
(0.41 x 1.50)
4.0 - 30 32Vac 300
30.1 - 60 250Vac 150
AXE 6.35 x 25.4
(0.25 x 1.00)
12 - 20 32Vac 300
GBF 5.2 x 20
(0.20 x 0.79)
1.0 - 20.0 250Vac 200
UBM 5.2 x 20
(0.20 x 0.79)
10.1 - 12.5 250Vac 1500
12.6 - 16 250Vac 1500
UDL 5.2 x 20
(0.20 x 0.79)
0.5 - 6.3 250Vac 150
Cat. No.
Size
mm(in)
Amps
(A)
Volts
(V)
Interrupting Rating
(A)
AXT 6.3 x 25.4
(0.25 x 1.00)
1 - 30 60Vac 3000
1 - 30 125Vac 3000
1 - 30 250Vac 3000
1 - 30 60Vdc 3000
1 - 30 125Vdc 3000
1 - 30 250Vdc 3000
30.1 - 50 60Vac 2000
30.1 - 50 125Vac 2000
30.1 - 50 250Vac 2000
30.1 - 50 60Vdc 2000
30.1 - 50 125Vdc 2000
30.1 - 50 250Vdc 2000
Cat. No.
Size
mm(in)
Amps
(A)
Volts
(V)
Interrupting Rating
(A)
Page 5 of 10JDYX2.E82636 - Fuses, Supplemental - Component
2013/7/5http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...
Supplemental micro fuses
ALC 18.0 x 39.0
(0.71 x 1.54)
25 - 63 125Vdc 500
25 - 63 600Vac 1500
AUC 14 x 39
(0.55 x 1.54)
25 - 40 500Vac 1500
25 - 40 125Vdc 1000
Cat. No.
Size
mm(in)
Amps
(A)
Volts
(V)
Interrupting Rating
(A)
CQ04PH 0.95 x 0.48 x 0.35
(0.04 x 0.02 x 0.01)
0.25 - 5 32Vdc 35
CQ04PV 0.95 x 0.48 x 0.35
(0.04 x 0.02 x 0.01)
0.25 - 5 32Vdc 35
CQ06LF 0.8 x 1.6
(0.03 x 0.06)
1 - 8 63Vdc 35
1 - 8 32Vdc 60
CQ06LT 0.8 x 1.6
(0.03 x 0.06)
1 - 8 63Vdc 35
1 - 8 32Vdc 60
CQ06PF 1.6 x 0.8 x 0.48
(0.06 x 0.03 x 0.02)
0.5 - 5 63Vac 100
0.5 - 5 32Vac 100
0.5 - 5 63Vdc 100
0.5 - 5 32Vdc 100
CQ06PH 1.6 x 0.8 x 0.48
(0.06 x 0.03 x 0.02)
0.5 - 5 63Vac 100
0.5 - 5 32Vac 100
0.5 - 5 63Vdc 100
0.5 - 5 32Vdc 100
CQ06PT 1.6 x 0.8 x 0.48
(0.06 x 0.03 x 0.02)
0.5 - 5 63Vac 100
0.5 - 5 32Vac 100
0.5 - 5 63Vdc 100
0.5 - 5 32Vdc 100
CQ06PV 1.6 x 0.8 x 0.48
(0.06 x 0.03 x 0.02)
0.5 - 5 63Vac 100
0.5 - 5 32Vac 100
0.5 - 5 63Vdc 100
0.5 - 5 32Vdc 100
CQ12LF 3.1 x 1.6 x 1.1
(0.12 x 0.06 x 0.04)
1 - 8 63Vdc 100
1 - 8 125Vac 50
1 - 8 125Vdc 50
1 - 8 32Vac 150
10 - 20 24Vdc 150
CQ12LH 3.1 x 1.6 x 0.9
(0.12 x 0.06 x 0.04)
10 - 20 24Vdc 150
1 - 8 32Vac 150
1 - 8 125Vac 50
1 - 8 63Vdc 100
1 - 8 125Vdc 50
Page 6 of 10JDYX2.E82636 - Fuses, Supplemental - Component
2013/7/5http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...
CQ12LT 3.1 x 1.6 x 1.1
(0.12 x 0.06 x 0.04)
1 - 8 63Vdc 100
1 - 8 125Vac 50
1 - 8 125Vdc 50
1 - 8 32Vac 150
10 - 20 24Vdc 150
CQ12LV 3.1 x 1.6 x 0.9
(0.12 x 0.06 x 0.04)
10 - 20 24Vdc 150
1 - 8 32Vac 150
1 - 8 125Vac 50
1 - 8 63Vdc 100
1 - 8 125Vdc 50
CQ12PF 3.1 x 1.6 x 0.72
(0.12 x 0.06 x 0.03)
0.5 - 7 63Vac 100
0.5 - 7 32Vac 100
0.5 - 7 63Vdc 100
0.5 - 7 32Vdc 100
CQ12PH 3.1 x 1.6 x 0.72
(0.12 x 0.06 x 0.03)
0.5 - 7 63Vac 100
0.5 - 7 32Vac 100
0.5 - 7 63Vdc 100
0.5 - 7 32Vdc 100
CQ12PT 3.1 x 1.6 x 0.72
(0.12 x 0.06 x 0.03)
0.5 - 7 63Vac 100
0.5 - 7 32Vac 100
0.5 - 7 63Vdc 100
0.5 - 7 32Vdc 100
CQ12PV 3.1 x 1.6 x 0.72
(0.12 x 0.06 x 0.03)
0.5 - 7 63Vac 100
0.5 - 7 32Vac 100
0.5 - 7 63Vdc 100
0.5 - 7 32Vdc 100
CQ24LF 6.1 x 2.6 x 1.1
(0.24 x 0.10 x 0.04)
1 - 20 125Vdc 100
1 - 20 32Vdc 300
1 - 20 125Vac 100
1 - 20 277Vac 100
1 - 20 350Vac 100
CQ24LT 6.1 x 2.6 x 1.1
(0.24 x 0.10 x 0.04)
1 - 20 125Vdc 100
1 - 20 32Vdc 300
1 - 20 125Vac 100
1 - 20 277Vac 100
1 - 20 350Vac 100
CQ24PF 6.1 x 2.6 x 1.15
(0.24 x 0.10 x 0.05)
0.5 - 12 350Vac 100
0.5 - 12 350Vdc 100
CQ24PT 6.1 x 2.6 x 1.15
(0.24 x 0.10 x 0.05)
0.5 - 12 350Vac 100
0.5 - 12 350Vdc 100
MSF 8.35 x 4.3 x 7.7 0.05 - 3.15 250Vac 35
Page 7 of 10JDYX2.E82636 - Fuses, Supplemental - Component
2013/7/5http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...
Supplemental micro fuses: pigtail leads
(0.33 x 0.17 x 0.30)
4.0 - 5.0 250Vac 10x Ampere rating
6.3 250Vac 10x Ampere rating
MST 8.35 x 4.3 x 7.7
(0.33 x 0.17 x 0.30)
0.04 - 5.0 300Vac 50
0.04 - 5.0 400Vac 100
0.04 - 5.0 250Vdc 100
0.04 - 5.0 250Vac 130
6.3 - 10.0 300Vac 50
6.3 - 10.0 400Vac 100
6.3 - 10.0 250Vdc 100
6.3 - 10.0 250Vac 130
0.04 - 3.15 250Vac 35
4 - 5.0 250Vac 10x Ampere rating
6.3 250Vac 10x Ampere rating
SEF 2.6 x 6.1
(0.10 x 0.24)
6 - 8 125Vac 50
6 - 8 125Vdc 50
6 - 8 32Vdc 300
10 125Vac 35
10 32Vdc 300
10 125Vdc 50
12 - 25 65Vac 50
12 - 25 65Vdc 50
12 - 25 24Vdc 300
12 - 25 86Vac 200
12 - 25 86Vdc 200
SEF(U) 6.2 x 2.6 x 2.6
(0.24 x 0.10 x 0.10)
0.062 - 8 125Vac 50
0.062 - 8 32Vdc 300
10 125Vac 35
10 125Vdc 50
10 32Vdc 300
12.0 - 15.0 65Vac 50
12.0 - 15.0 65Vdc 50
12.0 - 15.0 24Vdc 300
SET 6.2 x 2.6 x 2.6
(0.24 x 0.10 x 0.10)
0.2 - 7.0 125Vac 50
0.2 - 7.0 125Vdc 50
0.2 - 7.0 32Vdc 300
SET(U) 2.6 x 6.1
(0.10 x 0.24)
0.2 - 5 125Vac 50
0.2 - 5 125Vdc 50
Cat. No.
Size
mm(in)
Amps
(A)
Volts
(V)
Interrupting Rating
(A)
PBU 3.6 x 10
(0.14 x 0.39)
0.05 - 3.15 250Vac 10x Ampere rating
Page 8 of 10JDYX2.E82636 - Fuses, Supplemental - Component
2013/7/5http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...
Supplemental micro fuses: surface mount
Supplemental micro fuses: time delay, surface mount
(a) - Size (mm) of the models was derived from encapsulating, excluding pigtails.
4.0 - 6.3 250Vac 35
PDU 3.6 x 10
(0.14 x 0.39)
0.25 - 6.3 250Vac 35
0.25 - 6.3 250Vac 10x Ampere rating
PDU-P 3.6 x 10
(0.14 x 0.39)
0.25 - 3 250Vac 35
4 - 6.3 250Vac 10x Ampere rating
PEP (a) 3.5 x 13.5
(0.14 x 0.53)
0.1 - 5.0 250Vac 50
PFP (a) 3.2 x 8.6
(0.13 x 0.34)
0.1 - 7.0 125Vac 50
7.1 - 10.0 125Vac 50
0.1 - 7.0 125Vdc 300
7.1 - 10.0 125Vdc 300
10.1 - 15.0 32Vac 50
10.1 - 15.0 32Vdc 300
PMP (a) 3.5 x 13.5
(0.14 x 0.53)
0.375 - 7.0 250Vac 50
0.375 - 7.0 125Vdc 50
PSP (a) 3.5 x 13.5
(0.14 x 0.53)
0.5 - 5.0 125Vac 50
0.5 - 5.0 125Vdc 50
PTU 4.0 x 10.0
(0.16 x 0.39)
0.25 - 3.15 250Vac 35
4.0 - 6.3 250Vac 10x Ampere rating
PTU-P 3.6 x 10
(0.14 x 0.39)
0.25 - 3 250Vac 35
4 - 6.3 250Vac 10x Ampere rating
Cat. No.
Size
mm(in)
Amps
(A)
Volts
(V)
Interrupting Rating
(A)
04CF 1.05 x 0.58 x 0.43
(0.04 x 0.02 x 0.02)
0.3 - 5 32Vdc 35
04CT 1.05 x 0.58 x 0.43
(0.04 x 0.02 x 0.02)
0.3 - 5 32Vdc 35
06CF 1.7 x 0.9 x 0.55
(0.07 x 0.04 x 0.02)
0.2 - 1 32Vdc 50
1.25 - 5 32Vdc 35
06CT 1.7 x 0.9 x 0.55
(0.07 x 0.04 x 0.02)
0.2 - 1 32Vdc 50
1.25 - 5 32Vdc 35
12CT 3.5 x 1.5 x 0.8
(0.14 x 0.06 x 0.03)
0.2 - 7 32Vac 50
0.2 - 7 63Vdc 50
Cat. No.
Size
mm(in)
Amps
(A)
Volts
(V)
Interrupting Rating
(A)
12CF 3.5 x 1.5 x 0.8
(0.14 x 0.06 x 0.03)
0.2 - 7.0 32Vac 50
0.2 - 7.0 63Vdc 50
Page 9 of 10JDYX2.E82636 - Fuses, Supplemental - Component
2013/7/5http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...
Marking: Company name or tradename "CO" , "CONQ" , "CONQUER" and model designation.
� 2013 UL LLCWhen the UL Leaf Mark is on the product, or when the word "Environment" is included in the UL Mark, please search the UL Environment database
for additional information regarding this product's certification.
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up
Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide
Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the
data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the
extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2013 UL LLC".
Last Updated on 2013-07-03
Questions? Print this page Terms of Use Page Top
Page 10 of 10JDYX2.E82636 - Fuses, Supplemental - Component
2013/7/5http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...
Supplemental fuses, Ceramic Cartridge Fuses, non-renewable:
� Type ADA and APA (pigtail): 6.35 by 31.75mm, 15.1-20A, 125/250V ac, IR 125V ac - 10kA; IR 250V ac - 750A.
� Type ABE and ABP (pigtail): 6.35 by 31.75mm, 15.1-25A, 125/250V ac, IR 125V ac - 1000A; IR 250V ac - 200A.
� Types GBM and GBP (pigtail): 5.2 by 20mm, 12.1 - 15A, 125/250V ac, IR 125V ac - 10kA; IR 250V ac - 200A.
� Types GDA and GPA (pigtail): 5.2 by 20mm, 12.1 - 15A, 125/250V ac, IR 125V ac - 10kA; IR 250V ac - 200A.
� Types UDA and UDA-A (pigtail): 5.2 by 20mm, 800mA - 10A, 250V ac, IR 250V ac - 1500A, p.f.0.7-0.8.
� Types UBM and UBM-A (pigtail): 5.2 by 20mm, 63mA-10A, 250V ac, IR250V ac-1500A, p.f. 0.7-0.8.
� Type PTU (Pigtail): 3.88 by 11 mm, 250mA-6.3A, 250V ac, IR 250V-35A or 10In whichever is greater, p.f. 0.7-0.8.
Supplemental fuses, Glass Cartridge Fuses, non-renewable:
� Type GTE and GTP (pigtail): 5.2 by 20mm, 3.6 - 10A; 125/250V ac, IR 125V ac - 400A; IR 250V ac - 100A.
� Types USL and USL-A (pigtail): 5.2 by 20mm, 63mA -400mA; 250V ac, IR 250V-35A; � Types UTE and UTE-A (pigtail): 5.2 by 20mm, 500mA -10A; 250V ac, IR 250V-35A or 10 In
whichever is greater (In-Fuse rated current); � Types UFE and UFE-A (pigtail): 5.2 by 20mm, 63mA -10A; 250V ac, IR 250V-35A or 10 In
whichever is greater. � Type PBU(Pigtail): 3.88 by 11mm, 50mA-6.3A, 250V ac, IR 250V-35A or 10In whichever is greater,
pf 0.7-08
Supplemental Microfuses, non-renewable:
� Type MEF, rated 50mA-6.3A, 250V ac, IR 250V ac-35A or 10 In which is greater (In-rated nominal current of the fuse)
� Type MET, rated 40mA-6.3A, 250V ac, IR 250V ac-35A or 10 In whichever is greater. � Type SEF, 2.6 by 6.2mm ceramic cartridge fuses, 10.1 - 15A, 65V ac/dc, 24V dc; IR 65V ac/dc - 50A,
IR 24V dc - 300A. � Type MST, 8.45 by 7.85 by 4.25mm, 40mA - 6.3A, 250V ac, IR 250-35A or 10 In* which ever is
greater (In - rated nominal current of the fuse). � Type MSF, 8.45 by 785 by 4.25mm rated 50mA-6.3A, 250V ac, IR250-35A 10 In* whichever is
greater (* In - rated nominal current of the fuse).
Certification Record
CUSTOMER CLASS FILE
Conquer Electronics Co., Ltd. 1422-30 058630_0_000
No. 26, Wucyuan 5th Rd., Wuagu Township
FUSES-Supplemental Fuses - Component Acceptance
Taipei County
248
Taiwan Refer to Class Description for program details
Copyright © 2013 CSA International. All rights reserved.
Page 1 of 1
2013/3/13http://directories.csa-international.org/xml_transform.asp?xml=certxml\058630_0_000...