UTILITIES EQUIPMENT - mcafusionhire.co.uk · (For use with the Vulcathene chemical waste systems)...
-
Upload
dangkhuong -
Category
Documents
-
view
213 -
download
0
Transcript of UTILITIES EQUIPMENT - mcafusionhire.co.uk · (For use with the Vulcathene chemical waste systems)...
UTILITIES EQUIPMENT / Electrofusion 21
UTI
LITI
ES E
QU
IPM
ENT
Electrofusion
Electrofusion Control Units 22-24
Electrofusion Packages 25
Easy Grip, Frialen, Friatop, PlassonLarge Diameter Electrofusion Kits 26
Accessories 27-31
Generators 32
22 UTILITIES EQUIPMENT / Electrofusion
Electrofusion Control Units
Electrofusion
40v Electrofusion Control Unit
Available Units• Advance Welding ACT 1 - Simple
keypad entry• Advance Welding ACT 2 - Robust
design, simple keypad entry c/w Data logging facility
• Advance Welding ACT 3 - Robust design c/w Data logging facility and barcode reader
• Fusion Q Box - Robust design c/w data logging facility
ATS 180
• Welds constant voltage electrofusion fittings
• Suitable for low and medium pressure PE or PP pipe work systems from 16mm - 200mm diameter (½”-8”)
• Welding output is controlled voltage between 8V and 48V
• Small, lightweight and portable unit, over-shoulder design
• Bag or Stainless Steel frame• Welds fittings in Manual mode and
Barcode automatic mode• Data log memory of more than
2000 welds• Download data log using USB memory
80v Electrofusion Control Unit
• Advance Welding ACT4 - Robust design, simple keypad entry c/w Data logging facility
HIRE SALES REPAIR
HIRE SALES REPAIR
HIRE SALES REPAIR
23UTILITIES EQUIPMENT / Electrofusion
Electrofusion Control Units
Electrofusion
ATS 180 Combi Unit
• All in one generator and electrofusion welder
• Handy portable unit size - compact and convenient
• Specifically designed for service pipe installation and house connections market and useful for ‘spot-hire’ markets
• Welds PE and PP pressure fittings up to 180mm diameter in both Manual mode and Barcode mode that require no more than 50 amps after initial start up
• Full data logging capabilities
• Download data log using USB memory
• Power outlet capable of powering auxiliary equipment when electrofusion welder is not operating
• No need for extension leads
• CE approved
ATS HP
• Large diameter electrofusion products
• Welds constant voltage electrofusion fittings
• Suitable for low, medium and high pressure PE or PP pipe work systems from 16mm - 3500mm diameter (½”-138”) and larger depending on fitting manufacturer
• Welds fittings in Manual mode and Barcode automatic mode
• Data log memory of more than 2000 welds
• Download data log using USB memory
• Numeric keypad
• Fan cooled/ assisted cooling for higher duty cycles and hotter climates
• CE approved
HIRE SALES REPAIR
HIRE SALES REPAIR
24 UTILITIES EQUIPMENT / Electrofusion
Electrofusion Control Units
Electrofusion
40/80v Advance ACT 6 Mini 13 Electrofusion Control Unit c/w barcode Data logging
• Lightweight (13kg) versatile unit
• Capable of welding 40v and 80v electrofusion fittings
• C/W data logging facility, can also be supplied with barcode reader
HIRE SALES REPAIR
Specialist Electrofusion Control Units
MCA-Fusion Hire and Repair offer a wide range of control units suitable for use with various pipes and fittings as used by the water, gas, communication and chemical industries. All units are easy to use and lightweight to aid onsite installation.
The range includes:
• Enfusion Electrofusion Control Unit (For use with the Vulcathene chemical waste systems)
• +GF+ Instaflex Electrofusion control unit (For use with Instaflex hot and cold water system)
• Akatherm Akafusion Electrofusion Units
• Gebrit, Marley, Polypipe, Valsir, Wavin Duo and Terrain
HIRE SALES REPAIR
25UTILITIES EQUIPMENT / Electrofusion
Electrofusion Packages
Electrofusion
Electrofusion Package
Our Electrofusion packages ensure you have everything you need to undertake the work to industry specification.
Pictured is a typical Electrofusion package consisting of:
• EF Box
• Generator
• Shelter
• Alignment Clamp
• Pipe End Scraper
Shelter
Electrofusion Box
Generator
Pipe End ScraperAlignment Clamp
HIRE SALES REPAIR
26 UTILITIES EQUIPMENT / Electrofusion
Easy Grip, Frialen, Friatop, Plasson
Large Diameter Electrofusion Kits
Electrofusion
Large Diameter Electrofusion Kit
Our large diameter EF kits contain of all equipment required to carry out large diameter electrofusion installations.
• 80v electrofusion box
• Hydraulic positioning clamp
• Pipe scraper/exposure kit
• Petrol generator
• Top loading clamp
• ShelterPipe Scraper/Exposure Kit
80v Electrofusion Box
Hydraulic Positioning Clamp
Top Loading Clamp
Shelter
Petrol Generator
HIRE SALES REPAIR
27UTILITIES EQUIPMENT / Electrofusion
Cutter Key
• Universal Cutter Key for electrofused top tees
SALES
Hydraulic Positioning Kit
• Used to align and restrain large diameter electrofusion installations
• Hydraulic Re-Rounding system
• Size range: 100mm - 710mm
HIRE SALES REPAIR
End Preparation Tool
• Range of tools to cover pipe sizes 63mm - 710mm
• Maintains mechanical scraping across the whole joint area
• Fast scraping action
• Controlled depth of cut
HIRE SALES REPAIR
Pipe Scrapers
• Hand Scrapers: 1½” & 2½”
• Range of Mechanical Pipe End Scrapers: 20mm - 1200mm
• Protectaline Barrier Pipe Mechancical Pipe End Scrapers: 32mm - 180mm
• Large Diameter Protectaline Barrier Pipe Mechancical Pipe End Scrapers: 225mm - 355mm
• Purion 2
Accessories
Electrofusion
HIRE SALES REPAIR
28 UTILITIES EQUIPMENT / Electrofusion
Accessories
Electrofusion
Multi-Clamp
• Sizes: 63mm - 355mm
• Promotes full rerounding and restraint during electrofusion
• Can be used on elbows and tees
• Top clamp is removable via a hinge pin to allow for use in narrow trenches
• Extruded lightweight base
Titan 500 Strap Clamp
• Capable of pulling 12m lengths of pipe into position with minimal effort
• Fast acting ‘tug and tension’ straps
• Works in all positions around the joint - can also be used on tees
• Lightweight, compact design
• No liners required
G Clamp
• Used in the installation of top loading (also known as stack loading) electrofusion branch saddles and tapping tees
• Suitable for all manufacturers’ top loading fittings that comply with relevant GIS specifications
HIRE SALES REPAIR
HIRE SALES REPAIR
HIRE SALES REPAIR
29UTILITIES EQUIPMENT / Electrofusion
Accessories
Electrofusion
Large Diameter Mains Restraining K Clamps
• 63mm - 630mm
HIRE SALES REPAIR
Top Loading Strap Clamp
• Up to 500mm OD
Service Mini Clamp
• 16mm - 32mm OD
Mini-Posi Service Clamp
• 16mm - 32mm OD
Maxi-Posi Clamp
• 32mm - 63mm OD
Service Variclamp
• 16mm - 63mm OD
Service Universal Variclamp
• 16mm - 63mm OD
HIRE SALES
SALES
30 UTILITIES EQUIPMENT / Electrofusion
Accessories
Electrofusion
Frialen Large Diameter
• Up to 800mm OD
Versaclamp
A range of clamps that can be used on 90° and 45° elbows and straight connections. Available for use with 20, 25 and 32mm diameter pipe National Grid approved (GIS/PL2-5:2006).
Elbow Clamps
A very simple hand tool for clamping either 20, 25 or 32mm service pipe when fusing 90 degree elbows giving stress free joints. National Grid approved (GIS/PL2-5:2006).
Mini & Maxi Posi Clamps
Two lightweight versatile electrofusion clamps working in the range 20 – 40mm and 32 – 63mm. National Grid approved (GIS/PL2-5:2006).
Plasson Saddle
• Up to 800mm OD
SALES
SALES
SALES
SALES
31UTILITIES EQUIPMENT / Electrofusion
110V Extension Leads
• 16 amp/32 amp 110v extension leads
Guillotine Pipe Cutter
This robust tool is designed to cut high density polyethylene pipe so that no facing is needed for electrofusion and only minimal facing for butt fusion joints. The pipe cutter can be used in trenches with easily sharpened or replaced blades.
Size: up to 315mm
SALES
Accessories
Electrofusion
HIRE SALES REPAIR
PE Pipe Cutters
Up to 63mm PVC, UPVC and PE pipe cutter.
SALES
32 UTILITIES EQUIPMENT / Electrofusion
Generators
Electrofusion
5kVA Petrol
• 4kva - 10kva power output
• Producing a high quality, smooth, regular power output
• Comply with Tin 12 (ECE3) Specification
6kVA Diesel
• Producing a high quality, smooth, regular power output
• Dual Voltage
Petrol TIN12 ECE3 Generators
• 3kva - 10kva power output
• Producing a high quality, smooth, regular power output
• Comply with Tin 12 (ECE3) Specification
• Portable Site Generators 3kva
• Portable Site Generators 4kva
• Portable Site Generators 5kva
• Portable Site Generators 7.5kva
• Portable Site Generators 10kva
HIRE SALES REPAIR
HIRE SALES REPAIR
110V Generator TIN12 ECE3
• Portable Site Generators 3kva
• Portable Site Generators 5kva
• Portable Site Generators 7.5kva
• Portable Site Generators 10kva
HIRE SALES REPAIR