USER KNOWS - Şakalak Kurumsal Web Sitesi OTOMATİK - YARI OTOMATİK SOKLU ve DİSKLİ PULLUKLAR ŞK...
Transcript of USER KNOWS - Şakalak Kurumsal Web Sitesi OTOMATİK - YARI OTOMATİK SOKLU ve DİSKLİ PULLUKLAR ŞK...
TAM OTOMATİK - YARI OTOMATİK SOKLU ve DİSKLİ PULLUKLAR
ŞK | PULLUK SERİSİPLOUGH SERIAL
FULL AUTOMATIC SEMI AUTOMATIC FURROW AND DISC PLOUGHS
1975’DEN BUGÜNE DEĞERİNİ,
SINCE 1975, THE VALUE
USER KNOWS
ŞAKALAK TAM OTOMATİK SOKLU PULLUKLARI 2-3-4-5-6 soklu olarak profil gövde üzerine (11-12-14)” veya (12-14-16)”(inç) genişliğinde ayarlanabilecek şekilde imal edilmektedir. Kayalı, taşlı, bitkisel köklerle kaplı ve yeni ekime başlanan arazilerde kesintisiz sürüm sağlar. Pulluklarımız kaliteli ve özel malzeme kullanılarak CNC teknolojisi ile imal edilmektedir. Her gövdeye yerleştirilmiş özel yaylı amortisör kurtulma mekanizması sayesinde, taşlı arazilerde her türlü engelden rahatça kurtularak, pulluğun zarar görmesi engellenir. Traktörü yormaz, zaman ve yakıt tasarrufu sağlar.Pulluklarımız sağlam konstrüksiyonu ve kaliteli malzeme kullanımı ile uzun ömürlüdür.Pulluk askı sistemi uluslararası standartlara uygun olup, her türlü traktöre bağlanabilir.Pulluklarımızda İş genişliği vidalı bağlantıların konumu değiştirilerek 11”’den 16”e kadar ayarlanabilir.Otomatik kurtulma mekanizmasında özel amortisör yayları kullanılmaktadır. tensiyon, sertlik ayarı mevcuttur.Özel otomatik kurtulma mekanizması sayesinde, herhangi bir engelde pulluğa zarar verilmemesi sağlanmıştır. Bu sayede uç demirinin kırılması, cıvataların kopması, şase bükülmesi ve pulluk dizaynının bozulması gibi durumlar önlenmiş olmaktadır. Her gövde için bağımsız emniyet sistemi vardır.Aynaların ön kısmı parçalı olarak imal edilerek uzun ömürlü olması sağlanmıştır.Her gövde arası, boyuna uzatılmak suretiyle toprağın akışı rahatlatılmış, böylece toprak şişmesinden dolayı pulluğun traktöre vereceği çekiden gelen ağırlık ortadan kaldırılmıştır Pulluklara sonradan gövde (sok) ilavesi mümkündür.Yapı ve konstrüksiyon bakımından imalatı standarttır.
SAKALAK FURROW PLOWS is producing with 2-3-4-5-6 schocks on the body (11-12-13)`` or (12-14-16)``(inches) adjustable. At stony, rocky, covered with tree roots and new started soils is facilitate continuous plow. Our ploughs is producing using good quality using special materials and CNC technology. Through the recovery mechanism mounted special springly lift escape mechanism, placed at every one body of the plow and escape them from stony plowland and from all kind of prevents and escape the plough from harming.Doesn’t tire of the tractor and provides fuel escape energy.Our ploughs have a strong construction with quality material is a long lasting.Plugh mounted system is compatible with International standards, could be connected to all types of tractors.The working width could be adjusted by changing the screw connection locations from 11`` to 16``.In the automatic escape mechanism is using a special furrows absorber. Pressure, hardness adjust is included.Through special escape system, at any obstruction is secured against to harming the plough. For every one body separately is included the independent safety system.The adjustable front part is producing sectional and is provided for long lasting.Between the every one body, is relaxing the flow of the soil, thus the tractors pulling weight made by the plough caused of swelling the soil is removed. Is possible after to adding the body (sok) to the ploughs.In point of structure and construction producing is standard.
TAM OTOMATİK SOKLU PULLUKLAR FULL AUTOMATIC FURROW PLOUGHS
ModelCode
Model Kodu
Gövde Sayısı
Toplam Uzunluk
Toplam Genişlik
Toplam Yükseklik
İş Derinliği
Gövde Aralığı
Toplam Ağırlık
Ortalama Gereken
Güçİş Genişliği (mm)
Totally Length
Quantity of Bodys
Totally Width
Totally Height
Working Depth
Body Range
Approximately NeededPower
Totally Weight
Working Width (mm)
Kg
420
620
800
1000
1280
2
3
4
5
6
L (mm)
2100
2850
3470
4130
4750
N (mm)
1400
1450
1750
2120
2400
mm
680
680
680
680
680
HP
65-80
70-85
80-95
90-115
110-125
H (mm)
1440
1440
1440
1440
1440
Max (cm)
28
28
28
28
28
11”
720
900
1190
1500
1780
12”
750
950
1270
1620
1930
13”
780
1000
1350
1740
2080
14”
810
1050
1430
1860
2230
16”
860
1150
1590
2100
2520
ŞK-SP-02
ŞK-SP-03
ŞK-SP-04
ŞK-SP-05
ŞK-SP-06
TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS
Yedek parça servis hizmeti süreklidir.Continious spare parts service and support.
Üretimimizde, değişen teknoloji ve çalışma şartlarına göre değişiklik yapma hakkımız saklıdır.By producing, cause the changing of technology and working conditions all rights is reserved to our company SAKALAK to make change on.
FONKSİYONEL ÖZELLİKLER FUNCTIONAL SPECIFICATIONS OPSİYONEL ÖZELLİKLEROPTIONAL SPECIFICATIONS
For Soil MastersToprağın Ustalarına
Profil şaseli pullukların şase üzerindeki ayar deliklerinin konumları değiştirilerek iş genişlikleri değiştirilebilir. 11”, 12”, 13”, 14”, 16” iş genişliklerinde kullanılabilir.
Profile chassis plow working width can be changed by changing the position of the adjustment holes on the chassis. 11``12``13``14``16``available in working widths.
With the easy depth adjustable wheel is providing the plough to plow in same depth.
Produced with single flange. If desired, the body of the profile chassis plough could be 3+1, 4+1, 5+1 extend a furrow body.
Pulluğun aynı derinlikte sürüm yapmasını sağlayan kolay ayarlanabilen derinlik ayar tekeri.
Tek flanşlı olarak üretilmiş profil şaseli pulluklara istenirse sonradan 3+1, 4+1, 5+1 gövde (sok) ilavesi yapılabilir.
ŞAKALAK YARI OTOMATİK SOKLU PULLUKLARI (ŞK-SP-Y)2-3-4-5-6 soklu olarak lama şaselerden isteğe bağlı olarak 11-12-13-14-16”(inç) genişliklerinde imal edilmektedir.Pulluklarımız kaliteli malzemelerden yapılmıştır ve uzun ömürlüdür.Pulluk askı sistemi uluslararası standartlara uygun olup, her türlü traktöre bağlanabilir. Aynaların ön kısmı parçalı olarak imal edilerek uzun ömürlü olması sağlanmıştır. Uç demirleri trapez şeklindedir.Ters çevrilerek her iki tarafın da kullanılabilmesi sağlanmıştır. Kayalı, taşlı, bitkisel köklerle kaplı ve yeni ekime başlanan arazilerde kesintisiz sürüm sağlar. Her gövdeye yerleştirilmiş özel yaylı kurtulma mekanizması sayesinde, taşlı arazilerde her türlü engelden rahatça kurtularak, pulluğun zarar görmesi engellenir. Otomatik yaylarının baskı ayarı mevcuttur.Her gövde için bağımsız emniyet sistemi vardır. Traktörü yormaz, zaman ve yakıt tasarrufu sağlar. Yapı ve konstrüksiyon bakımından imalatı standarttır.
SAKALAK SEMI AUTOMATIC FURROW PLOUGHS optionally is producing with 2-3-4-5-6 mouldboards made from lama chassis in 11-12-13-14-16``(inches) widths.Our plughs is made of qualited material and is long lasting.Plugh mounted system is compatible with international standards, could be connected to all types of tractors.Front part of is produced as a pieced, is provided to be a long lasting. Share is trapezoidal. By reversing İs provoded to be used bilateral. At stony, rocky, covered with tree roots and new started soils is facilitate continous plow. Through the recovery mechanism mounted special springly lift escape mechanism, placed at each body of the plow and escape them from stony plow land and from all kind of prevents and escape the plough from harming. Pressure adjust of automatic springs is included. Every one body is including a safety system. Is not tire the tractor and is saving the fuel. In point of structure and construction producing is standard.
YARI OTOMATİK SOKLU PULLUKLAR SEMI AUTOMATIC FURROW PLOUGHS
Lama Chassis
Lema Şaseli
2’li
3’lü
4’lü
5’li
2’li
3’lü
4’lü
5’li
2’li
3’lü
4’lü
5’li
2’li
3’lü
4’lü
5’li
mm
1500
2150
2800
3450
1500
2150
2800
3450
1500
2150
2800
3450
1500
2150
2800
3450
mm
1050
1200
1300
1600
1075
1250
1375
1700
1100
1300
1450
1800
1125
1350
1525
1900
mm
1260
1260
1260
1260
1260
1260
1260
1260
1260
1260
1260
1260
1260
1260
1260
1260
mm
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
mm
590
830
1070
1310
620
880
1150
1410
640
930
1220
1510
670
980
1300
1610
mm
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
Kg
250
395
475
590
255
400
595
754
260
405
600
759
265
410
605
764
Hp
50-55
60-65
75-80
85-95
55-60
65-70
80-85
95-100
60-65
70-75
85-90
100-105
65-70
75-80
90-95
105-110
Toplam Uzunluk
11 Soklu Pulluk
11 Furrow Plough
12 Soklu Pulluk
12 Furrow Plough
13 Soklu Pulluk
13 Furrow Plough
14 Soklu Pulluk
14 Furrow Plough
Toplam Genişlik
Toplam Yükseklik
İş Derinliği
Gövde Aralığı
Toplam Ağırlık
Ortalama Gereken
Güç
İş Genişliği (mm)
TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS
Totally Length
Totally Width
Totally Height
Working Depth
Working Width (mm)
Body Range
Approximately NeededPower
Totally Weight
Gövde Sayısı
Quantity of Bodys
Yedek parça servis hizmeti süreklidir.Continious spare parts service and support.
Üretimimizde, değişen teknoloji ve çalışma şartlarına göre değişiklik yapma hakkımız saklıdır.By producing, cause the changing of technology and working conditions all rights is reserved to our company SAKALAK to make change on.
Pulluk uç demirleri ve pulluk kulakları (aynalar) özel olarak yaptırılmaktadır. Kulak üzeri devirme parçaları toprağı parçalayarak hasat artıklarının toprağa daha iyi gömülmesini sağlar.
The plough share and the mouldboards is producing especially. The overturning parts over the mouldboard while fragment the soil is embed the crop residues to the soil deeper and is shown the soil beter.
With the easy depth adjustable wheel is providing the plough to plow in same depth.
Pulluğun aynı derinlikte sürüm yapmasını sağlayan kolay ayarlanabilen derinlik ayar tekeri.
For Soil MastersToprağın Ustalarına
FONKSİYONEL ÖZELLİKLER FUNCTIONAL SPECIFICATIONS
OPSİYONEL ÖZELLİKLEROPTIONAL SPECIFICATIONS
ŞAKALAK DİSKLİ PULLUK Diskler vasıtasıyla batarak, toprağı kesme ve çevresel çaplar yardımıyla toprağı aktarma özelliklerine sahip birinci sınıf toprak işleme aletidir. İsteğe bağlı olarak 2-3-4-5-6 ve 7-8-9-10 diskli olarak imal edilebilmektedir. Kayalı, taşlı, bitkisel köklerle kaplı arazilerde rahatlıkla çalışabilir.Diskli pulluğun son gövde bağlantısı flanşlı tip yapılabilmektedir. Bu sayede pulluğun son gövdesi sökülüp takılabilir veya İstenildiği takdirde pulluğa sonradan gövde ilavesi yapılabilmektedir.Pulluklarımız sağlam konstrüksiyonlu ve kaliteli malzemeden yapılmıştır.Uzun ömürlüdür.Diskler bor çeliğidir.Disk bağlantılarının yapıldığı parçalar (flanşlar-kızaklar) sadece ŞAKALAK ‘a özel olarak dövme teknolojisi ile imal edilmiştir.Üç nokta askı sistemi uluslararası standartlara göre imal edildiğinde her türlü traktöre takılabilir özelliktedir.Pulluklarımızın Diskleri hem hareket yönüne paralel düzlemde (yön açısı), hem de toprak yüzeyine göre(durum açısı) açı oluştururlar.Pulluğun son gövdesinde helezon yay sistemli dengeleyici tekerlek(sarhoş teker) bulunmaktadır.Yapı ve konstrüksiyon bakımından imalatı standarttır.
SAKALAK DISC PLOUGH is penetrating with help of the disc, cutting a soil and with the help of environmental diameters. Is owning the soil turning specification is a first tillage soil processing machine.Optionally could be producing with 2-3-4-5-6 and 7-8-9-10 discs.Is working easily At stony, rocky and tree roots covered terrains.Is possible to make the last body connection of disc plough as a flanged type. Due to last body of the plough could be sectional or as desired is possible to producinb extending body.Our plughs is made of strong construction and with quality material. Is long lasting.Discs is made of Borrium.Connecting parts of the discs (flanges-slides) is produced specially just for SAKALAKLAR by using a forging technology.Cause the three point linkage system is produced in international standards is compatible with all tractor types.Our plough discs making (way angle) the direction of movement coplanar and according the soil surface (status angle) is making a angle.On the last body of the plough is placed telescopic spring systemed Wheel (steering Wheel).Point of structure and construction producing is standard.
Boru şaseli pulluklarda diskin durum açısı payandaların altında bulunan kertik vasıtasıyla üç konumda ayarlanabilir.
On tube chassis plough the angle status of the disc is adjusting to three locations with the notch placed under the props.
Profil şaseli pulluklarda pulluk gövdeleri sökülebilir.
On Profile chassis owning ploughs is possible to remove the body.
Lama şaseli diskli pulluklarda disk ayakları şase üzerinde gezer tip bağlantılıdır. Disk arası mesafesi ayarlanabilir.
On Lama chassis owning disc ploughs, the disc foots is moving over the chassis type connection. Distance between the discs is adjustable.
BORU ŞASE / TUBE CHASSIS PROFİL ŞASE / PROFILE CHASSIS LAMA ŞASE / LAMA CHASSIS
DİSKLİ PULLUKLAR DISC PLOUGH
Yedek parça servis hizmeti süreklidir.Continious spare parts service and support.
Üretimimizde, değişen teknoloji ve çalışma şartlarına göre değişiklik yapma hakkımız saklıdır.By producing, cause the changing of technology and working conditions all rights is reserved to our company SAKALAK to make change on.
Lama Chassis
BORU ŞASE / TUBE CHASSIS
PROFİL ŞASE / PROFILE CHASSIS
LAMA ŞASE / LAMA CHASSIS
Lema Şaseli
Adet
2
3
4
5
2
3
4
5
2
3
4
5
ŞK-DP-2
ŞK-DP-3
ŞK-DP-4
ŞK-DP-5
ŞK-DP-2
ŞK-DP-3
ŞK-DP-4
ŞK-DP-5
ŞK-DP-2
ŞK-DP-3
ŞK-DP-4
ŞK-DP-5
mm
1580
2040
2600
3010
1580
2040
2600
3010
1325
2080
2830
3600
mm
1180
1200
1550
1600
1180
1200
1550
1600
1130
1250
1615
1985
mm
1250
1250
1250
1250
1300
1300
1300
1300
1300
1300
1300
1300
mm
660
660
660
660
660
660
660
660
660
660
660
660
cm
25
25
25
25
25
25
25
25
25
25
25
25
cm
66
99
132
165
66
99
132
165
81-88
112-125
142-161
173-198
cm
53
53
53
53
53
53
53
53
74-80
74-80
74-80
74-80
Hp
40-45
50-60
60-70
80-90
40-45
50-60
60-70
80-90
40-45
50-60
60-70
80-90
Kg
310
400
470
540
320
395
560
700
320
395
560
700
Toplam Uzunluk
Disk Sayısı
Toplam Genişlik
Toplam Yükseklik
Quantity of Discs
İş Derin-liği
Gövde Aralığı
Disk Çapı
Toplam Ağırlık
Ortalama Gereken
Güç
İş Genişliği (mm)
Disc Diameter
Totally Length
Totally Width
Totally Height
Working Depth
Working Width (mm)
Body Range
Approximately NeededPower
Totally Weight
TEKNİK ÖZELLİKLER / TECHNICAL SPECIFICATIONS
TAM OTOMATİK - YARI OTOMATİK SOKLU ve DİSKLİ PULLUKLAR
T: +90.332 239 02 70F: +90.332 239 02 76E: [email protected]
Yetkili Bayimiz
Şakalak Tarım Makinaları San. ve Tic. A.Ş.3. Organize Sanayi Bölgesi Büyük Kayacık Mh.Evrenköy Cd. 1 Nolu Sk. No: 4 Konya / Türkiye
Toprağın Ustalarına For Soil Masters
FULL AUTOMATIC SEMI AUTOMATIC FURROW AND DISC PLOUGHS
Authorized Seller