8/9/2019 Ug Leaflet

1/20

UG SpecialUG SpecialUG SuperUG Super

UG Special / Super

8/9/2019 Ug Leaflet

2/2022

Pointing in the right direction.

The success story continues. The UG trailed field

sprayer offers you simple-to-operate, robust technol-

ogy that ensures large workrates, yet on lightweight

tractors and minimal set-up times.

It provides ultramodern spraying technology that is

quick and safe on the road, can be easily and quickly

operated without problems and carries out its work

in the field accurately, without fuss and in an environ-

mentally friendly way.

Forge ahead with AMAZONE ideologyTable of contents

Introducing the UG p. 2/3

Running gear p. 4

Drawbars p. 5

Design & pumps p. 6/7

Application technology p. 8

Super-S boom p. 912

DUS pressure recirculation system p. 13

AMATRON+ & GPS-Switch p. 14/15

AMASPRAY+ & documentation p. 16/17

Nozzles p. 18/19

Technical data p. 20

8/9/2019 Ug Leaflet

3/20

UG Special / Super

33

High ground clearance with smooth rounded

frame

Tank with absolutely smooth walls and

a favourable centre of gravity

Ultra-sturdy, ultra-light and ultra-compact

sprayer boom

Outstanding boom suspension for a smooth

boom ride

High capacity pumps

Ultramodern, user-friendly valve chest and

in-cab computer technology

Benefits that speak for themselves:

UG 2200:

2400 l actual volume with 300 l flushing

water tank

UG 3000:

3200 l actual volume with 400 l flushing

water tank

Super-S boom:

15, 16, 18, 20, 21, 24, 27 or 28 metre

UG Special with 250 l/min single pump

UG Super with 370 l/min dual pumps

Tough UG models:

The right strategy for saving time, worry and cost.

UG the 100,000 ha machine.

Introduction

8/9/2019 Ug Leaflet

4/204

The wide, profile steel frame, compact tank and the

robust boom technology all contribute to the required

reliability. All the edges are rounded off and all hoses

are neatly routed inside the frame.

Robust, reliable technology

Maximum ruggedness for maximum output.

Ultra-sturdy frame technology for the most

arduous continual operation.

Selecting of the right tyres is of the utmost importanceif the soil is to be protected during work.

Wheel equipment that protects the soil

The width adjustable axle can be specified unbraked

or equipped with a dual-circuit compressed-air, or

hydraulic braking system, as required. The track width

can be infinitely adjusted to between 1.50 and 2.25 m.

40 km/h licence on request.

Running gear of choice

AMAZONE mudguards can be adjusted for the vari-

ous tyres options. The mudguard equipment option

includes a large canister holder to the right hand side

as standard.

Operation that protects the crop

UG 2200 Special with24 m Super-S boom

8/9/2019 Ug Leaflet

5/20

UG Special / Super

5

Running gear/drawbar

Quick on the road excellent in the field.

The sturdy track following drawbar ensures that the

machine follows in the tracks behind the tractor. The

built-in length adjustment allows the steering geometry

of the tractor to be adapted.

No wheel track damage

with the track following drawbar

The universal drawbar can be set either to the track

following position or locked into the transport position.

No wheel track damage

with the universal drawbar

The ultra-sturdy straight drawbar is particularly suit-

able for quick transport journeys. In addition, Trail-tron

can be fitted to a straight or hitch drawbar for electro-

hydraulically actuated, automatic, near perfect track

following.

Straight drawbar

Like the straight drawbar, the hitch drawbar is available

in conjunction with the ring towing eye or ball coupling

(K80) and can be additionally equipped with hydraulic

control or Trail-tron.

Hitch drawbar

Hydraulic steering of the universal, hitch or straight

drawbar enables the operator to correct the direction

of travel of the sprayer by adjusting the drawbar via

a tractor control valve.

Hydraulic steering

40km/h

40km/h

40km/h

8/9/2019 Ug Leaflet

6/206

6

High output technology: UG

Robust wide profile steel frame in which all hoses

are routed so that they are protected.

Compact tank with smooth internal and externalwalls. Two tank openings for easy checking.

Induction bowl with Power-Injector for the induction

of large quantities of chemicals and for canister

flushing.

Large fresh water tank for diluting residual amounts

or for cleaning the sprayer, even when the tank is full.

Separate hand wash tank (20 litres).

Mechanical direct fill level indicator with float and also

electronically in the in-cab terminal as standard.

Clothing locker for agricultural protective clothing

(optional).

Simply good.

All the controls are arranged in a logical, unconfusing

manner on the front left corner, within easy access ofthe drivers door. All the working functions can be

quickly intuitively understood thus preventing any

operator errors.

Clearly laid out operator station

8/9/2019 Ug Leaflet

7/20

UG Special / Super

7

7

Design & pumps

Quick and safe

The intensity of the hydraulic agitator can be adjusted

infinitely down to complete shutdown in order to pre-

vent foaming of the crop protection agent or to facilitate

the spraying out of residual quantities.

On AMAZONE sprayers, the flushing stream from

the self-cleaning pressure filter is used for agitating

. The pump equipment of the UG Super is suitable

for high agitation outputs at low PTO shaft speeds .

Hydraulic agitation intensity

The piston diaphragm pumps are particularly reliable,

protected when run dry and are safe for liquid fertiliser.

The multiple-cylinder design of the pumps simultane-

ously ensures even delivery with a high suction power

and smooth operation. The pumps are available with

delivery capacities of 250 l/min (Special) or 370 l/min

(Super). The 370 l/min pump setup is a tandem pump,

where the main pump works together with a separate

agitation pump. The tandem pump is ideal for farms

with high application rates or which use liquid fertiliser.

The suction filter can be easily accessed via the simple

AMAZONE bayonet coupling without the loss of spray

liquid.

Piston diaphragm pumps

The sprayer can be filled with the help

of a suction hose (3") with non-returnvalve or fill connection with C-coupling.

Utilising the additional injector that can

be activated, means filling rates of up

to 500 l/minute can be achieved.

Fill capacity 500 l / min

Filling via a suction hose Filling using pressure (C or Kamlokcoupling)

8/9/2019 Ug Leaflet

8/20

8/9/2019 Ug Leaflet

9/20

UG Special / Super

999

Application technology & boom

AMAZONE booms in aircraft wing construction

AMAZONE booms have a special

profiled design which makes them

both ultra-sturdy and ultra-light.

Working widths of 15 to 28 metres

allow optimum adaptation to thefiled sizes and topography on the

farm with various folding options.

The high quality design en-

sures a long service life even

where very large areas are

covered.

Profiled design; superbly light

yet at the same time

superbly strong

The Super-S boom is folded in and out fully automati-

cally via hydraulic cylinders. In the transport position,

the boom is extremely compact, packing neatly behind

the main tank with a transport width of only 2.40 m and

Ultra-narrow transport width of only 2.40 ma transport height of 3.30 m. With a steel profiles up to

140 mm wide with multiple bends, the Super-S boom

is extremely strong.

8/9/2019 Ug Leaflet

10/201010

Super-S boom: firm and steady.

All AMAZONE booms come as standard with:

1. A spring/shock-absorber package for dampening

the vertical roll movements,

2. Spring damping elements with ball suspension for

the damping of horizontal yaw movements and

3. Spring elements for the shock-absorbing suspen-

sion of the entire boom against bounce.

3-fold shock damping suspension for the most difficult operating conditionsLikewise, the standard hydraulic height adjustment and

height indictation skid produce an exact longitudinal

and lateral distribution of the spray liquid.

Spring damping systemto reduce the horizontalyaw movement

Boom lock

Spring damping systemto reduce the verticalroll movement

Central pendulum suspension

Central pendulum

1st hinge perpendicularto the direction of travel

8/9/2019 Ug Leaflet

11/20

UG Special / Super

1111

Super-S boom

The most important quality features

We are delighted with the performance of our record-breaking sprayer: The joints and the

entire boom system have not suffered from any fatigue even well after 100,000 hectares

sprayed.

Carin Handriek, Landwirtschaftliches Zentrum Hrsteltal e.G., 99880 Mechterstdt

Assessment of the Super-S boom

Maintenance-free

Decades of experience in boom

construction have paid off:

The conical hinge pin is the intelligent

core of an ingenious boom philoso-

phy. The boom sits on the conical

hinge pin without any play and still

ensures optimum boom function for

the user even after years of use.

Durable

The standard use of stainless

steel, the KTL painting proc-

ess is of automobile standard

and the strategic use of plas-

tics and aluminium are the

guarantee for a long service

life.

Exclusively at AMAZONE:

All hydraulic fittings and pipe ends are made from

stainless steel.

28 /23/18/13/7

27 /23/18/13/7

24 /18/13/7

21/17/13/7 or 20 /17/13/7

21 /15/11/7

18 /13/7

16 /12/7

15 /12/7

Examples of the

nozzle layout

24 m Super-S

Design of the Super-S boom

Mechanical

folding points

8/9/2019 Ug Leaflet

12/201212

Flexibility thanks to the

hydraulic boom fold permutations

All Super-S booms are folded fully hydraulically

by over-sized hydraulic cylinders.

Standard folding

On sloping terrain and with large working widths, the

additional hydraulic tilt adjustment with its in-cab tilt

display is useful.

Hydraulic tilt adjustment

The ability to fold

one side in is possible

with AMASPRAY+ and

AMATRON+ via a hydrau-

lic sequencing valve.

Pre-select fold

Profi-fold is the electro-hydraulic actuation of the

boom by means of a continual oil circuit. The func-

tions of height adjustment, folding out/in, one-sided

folding, boom reduction and tilt adjustment can easily

Profi-fold with AMATRON+

With the Super-S booms, fully automatic boom

ride height control is also possible.

Distance-Control ensures the automatic optimum

boom height and tilt position in conjunction withProfi-fold I or II.

Distance-Control with AMATRON+

Ultrasound sensor

be actuated with Profi-fold I via AMATRON+ or

the joystick. Additional boom tip angle adjustment

is possible with Profi-fold II.

The high level of flexibility offered by the pre-select

folding function enables all part width sections to be

folded individually. Both the left and right-hand sides

can be folded in separately and independently of each

other in order to adapt to any circumstances in your

fields.

Ultrasound sensor

Angle sensors

Boom tip angling

8/9/2019 Ug Leaflet

13/20

UG Special / Super

131313

Hydraulic folding & DUS

DUS pressure recirculation system

Brilliantly simple this is how DUS works

When starting the spraying opera-

tion all the hoses including the spray

lines are filled under pressure in the

reverse direction with the mixed

spray agent.

This means the spray lines are

always full and immediately ready

to use with the correct concentra-

tion of spray agent over the entire

working width. There is no waiting

on the headland.

Every time individual part width

sections are shut off, during each

turning operation and during trans-

port, the spray liquid circulatescontinually. This is done via the

AMAZONE pressure relief valve,

which guarantees the continual

circulation.

This reliably prevents deposits,

blockages or segregation in the

spray lines. The concentration of

the spray liquid always remains

constant right up to the nozzles,so the start of spraying is carried

out without any problems after, for

example, a change of ingredients.

During the cleaning operation,

fresh water flushes the spray

lines out right up to the nozzles,

without any spraying being neces-

sary. During cleaning, the concen-

trated spray liquid is routed backinto the spray liquid tank via the

pressure recirculation system.

The flow of spray agent is delivered from the pressure regulator to a pressure

relief valve and travels with almost no pressure on to the throttle valve. The

spray agent is now allowed to travel in the reverse direction back to the tank.

from pump pressure relief valve

Spray lineto

the

tank

part

width section

shut-off

valve

check valve

8/9/2019 Ug Leaflet

14/201414

Exact metering and simple operation

The AMATRON+ on-board computer enables fully

automatic control of the prescribed spread rate (l/ha).

Rates can be changed in pre-selected % increments.

This modern on-board computer is especially user-

friendly, thanks to its clear, simple and logical oper-

ation and with its extra-large, low-reflection display

it monitors the complete system. The very compact

dimensions of the computer mean that little space is

required in the tractor cab.By using two flow meters, the application rate is

extremely precisely maintained, particularly at low

spray rates.

The optional multi functionjoystick makes the operation

of the machine especially com-

fortable. Without visual contact,

the most important spraying

functions can be controlled via

the ergonomically shaped handle.

The AMATRON+ is then used only

as a monitoring and input device. A

small toggle switch allows the use of

the 8 buttons in three different levels.

Multi-function joystick

In order to shut off individual part-width sections for

certain applications (bed treatments) or in row crops

such as vegetables, the corresponding part-width

sections can be pre-selected and isolated in theAMATRON+ menu.

If this function is regularly needed, the use of the

AMACLICK is recommended.

AMACLICK

Special functions:

Foam marker actuation

End, border and additional nozzle switching

Pre-select fold for one-side independent boom reduction

Profi-fold for one-side independent boom fold or

boom tip angle adjustment (only 1 tractor valve required)

Distance-Control automatic boom ride height control

ASD inside (automatic field-related documentation):

serial interface

Standard functions:

Overall and part-width section control

Up to 9 part-width sections

Digital pressure indication

Digital fill level indication

Display of boom position and lock status

Field record management with 20 memories

Serial interface for documentation and GPS terminal use

Compatible with GPS-Switch

AMATRON+

8/9/2019 Ug Leaflet

15/20

UG Special / Super

1515

AMATRON+ & GPS-Switch

One terminal for all AMAZONE machines

With the universal AMATRON+ on-board computer,

many machines can be controlled from the AMAZONE

product range. When using the ZA-M fertiliser spreader

in conjunction with the Comfort electronic pack, the

Limiter boundary spreading device and the hydraulic

shutters can be controlled. Forward-speed or position-

determined application rate control is also possible.

When AMAZONE seed drills are used, the AMATRON+

is responsible for the electronic tramline control. Also

in this case you can change the seed rates in freely

selectable steps. When using the Cirrus trailed seed

drill, the comprehensive electro-hydraulic functions,

such as seed depth or intensity of seedbed prepara-

tion, are also controlled via AMATRON+.

Sprayers

Fertiliser spreaders

Seed drills

Automatic part-width section

control with GPS-Switch andAMATRON+

This new GPS-aided on-board computer system

automates the precise shut-off of the machine in

the correct position on the headland, in shortwork

and in wedges. The working width and the layout

of the part-width sections are taken into account.

Once the machine has been driven around the

field once, the field boundaries are recorded and

everything then runs automatically.

The GPS-Switch on-board computer can be used

universally with AMATRON+ for both fertiliser

spreaders and for crop protection sprayers. Fertiliser spreadersCrop protection sprayers

RS232 CAN bus

Speedsignal

Base equipment

GPSReceiver

Job computer

8/9/2019 Ug Leaflet

16/2016

AMASPRAY+ on-board computer

The AMAZONE AMASPRAY+ on-board computer

is a robust and self-explanatory spray rate controller.

The user is able to concentrate on driving, while the

computer controls and regulates according to the

forward speed.

The most important data:

The pressure and spray rate are always displayed.

The current tank fill level appears at the press

of a button.

AMASPRAY+

AMASPRAY+ modern and precise

For the spray computers AMATRON+ and AMASPRAY+

the most modern control chest technology is available.

The part-width boom sections are actuated quickly and

drip-free via electric motor valves with pressure relief.

In all situations, the spray rate is controlled directly by

the computer precisely and quickly with this technologynegating the need for an equal pressure system.

Spray technology

Special functions:

Pre-select fold for one-sided boom reduction

End or boundary nozzle switching (as an alternative

to pre-select fold)

Folding and tilt via 1 double acting valve (electric

changeover valve)

ASD inside (automatic field-related documentation):

serial interface

Standard functions:

Single-line, high-contrast screen

Whole boom and part-width section control

5 or 7 part-width sections

Digital pressure indication

Digital fill level indication

Display of boom position and lock status

Hectare counter (overall and daily counter)

+/- 10 % button

Valve chest TG for AMATRON+ and AMASPRAY+

8/9/2019 Ug Leaflet

17/20

UG Special / Super

17

AMASPRAY+ & documentation

GPS control and sensor systems

The UG sprayers can be controlled from external

GPS terminals in order to vary the spray rate.

One example is site-specific variation of growth

regulator in cereals with the YARA N-sensor.

Documentation with ASD

Automatic field-related documentation (ASD)

gives you the option of automatically exchanging

records and actual values for specific fields based

on arable cropping databases with the AMASPRAY+

and AMATRON+ on-board computers via a Bluetoothinterface. Documentation becomes more precise and

simpler. Many hand-written steps are no longer re-

quired.

ASD now enables documentation with many major

field record database providers in Europe. The ASD

interface is available as an open standard for all device

and software providers. With ASD, AMAZONE is offer-

ing a practical and reasonably priced documentation

solution for all types of farm.

Precise and simple documentation

ACURA for tank filling

As an integrated part of BASF-Pocket Software,

the ACURA fill quantity calculator provides the con-

nection between planning in the office and filling the

machine. ACURA uses field record database data for

the planned quantities of crop protection agent and

liquid fertiliser, the selected fields and the size of the

machine to calculate the required fill quantities for the

machine. The number of filling operations required for

the current application is also calculated.

8/9/2019 Ug Leaflet

18/2018

The spraying specialist advises ...

With the air-assisted injector nozzles, crop protection agents

can be applied with very little drift.

They are universally usable in grain, beet, potatoes, etc.

Because of the larger drop application, these nozzles can

also be used in higher wind speeds.

Nozzle protection tubes in the outer area or, if required,

over the entire working width of the boom protectthe nozzles.

AMAZONE offers to growers a wide range

of nozzles made by Agrotop, Lechler and Teejet.

... less drift, even at higher wind speeds

Liquid

Nozzlebody

Air

Injectorinsert

Air

Single and multiple nozzle bodies

Anti-drip nozzle bodies with a Teejet bayonet cap system

enable a quick changing of nozzles. The triple nozzle bodies

are an appropriate solution for frequent nozzle changes due

to different applications and crops.

8/9/2019 Ug Leaflet

19/20

8/9/2019 Ug Leaflet

20/20

UG Special / Super

Technical data

Technical data

Basic machine UG 2200 Special UG 2200 Special UG 3000 Super UG 3000 Super UG 3000 Super

Boom 18 m Super S 21 m Super S 21 m Super S 24 m Super S 27 m Super S

Pump 250 l/min 250 l/min 370 l/min 370 l/min 370 l/minValve chest TG 5-fold TG 7-fold TG 7-fold TG 7-fold TG 9-fold

Drawbar Universal Universal Universal Yoke Yoke

braked braked braked braked braked

Tyres 270/95 R 42 270/95 R 42 270/95 R 48 300/95 R 46 520/85 R 38

Actual volume (l) 2400 2400 3200 3200 3200

Empty weight (kg) 2496 2620 3089 3163 3444

Length (m) 5.28 5.28 5.28 5.80 5.90

Height (m) 3.30 3,30 3.30 3.30 3.30

Transport width (m) 2.40 2.40 2.40 2.40 2.40

Height adjustment (m) 0.50 2.10 0.50 2.20 0.50 2.20 0.50 2.20 0.50 2.20

Illustrations, contents and details about technical data are non-binding!

Length

Height

AMAZONE sprayers generate profit!

UF mounted sprayer,900 / 1200 litres

UF mounted sprayer,1500 / 1800 litres

UX trailed sprayer,3200 / 4200 / 5200/ 6200 litres

SX self-propelled sprayer,4000 litres

Basic machine

Pump equipment and drive

Control chest and control box

Sprayer boom, spray line, hose package

and folding system

Special equipment

Lighting

The UG trailed sprayer consists of:

MI 2520 (GB) 10 09

AMAZONEN-WERKE H. DREYER GmbH & Co. KG P. O. Box 51 D-49202 Hasbergen-Gaste/Germany

Phone +49 (0)5405 501-0 Fax +49 (0)5405 501-193