General Catalogue

The Quality is transparent

V.I.M.E. srl Via Gramsci,15 40050 Funo - Bologna ( Italy ) Tel. 0039 051 861 362 – Fax 0039 051 861 961

e-mail:info@vimeindustrial.com www.vimeindustrial.it- www.vimeindustrial.com

The Quality is transparent General Catalogue

SMART AND RELIABLE SOLUTIONSSMART AND RELIABLE SOLUTIONS

ELECTRIC WORM GEAR WINCHES

SERIE JE 3600 JE 2700

SERIE JE 3000 JE 2300

SERIE JES 1300 JES 1000

SERIE ZE 4000

HYDRAULIC WORM GEAR WINCHES

SERIE JH 3600 JH 2700

SERIE JH 3000 JH 2300

SERIE JHD 2300 JHD 2000

SERIE ZH 3000 ZH 2200

SERIE RNH 4500 RNH 5400

SERIE RSH 4500 RSH 5400

SERIE RCH 4500 RCH 5400

HYDRAULIC WORM GEAR WINCHES

SERIE TH 6000

SERIE MH 9000

SERIE WH 17500

SERIE NH 20000 NH 25000

SERIE PH 30000 PH 35000

HYDRAULIC PLANETARY WINCHES

SERIE EPH 3600 EPH/L3600

SERIE EPH/C 4500 EPH 4500

SERIE EPH 5200

SERIE EPH 3600FN EPH/L 3600FN

SERIE EPH/C 4500FN EPH 4500FN

SERIE EPH 6800FN

SERIE EPH 10000 EPH 13200

SERIE EPH 6800

COMPANY PROFILE VIME has always been a power player in the world of winches. And for good reason. Year after year VIME winches have been at the forefront of technology and unequalled performance. Nowadays more European and world industries rely on VIME winches for good performance and uncompromising quality they can offer.

VIME has had a long-standing commitment to producing quality winches throughout its range. To ensure that the company’s production quality system is maintained, VIME has applied for and been granted the German TÜV GS approvals which comply with the relevant standards and this certification has been achieved through TÜV Product Service GmbH of Monaco on its most sold winches Serie: JE 3000 JE 2300 JH 3000 JH 2300 JHD 2300 JHD 2000 EPH 3600FN RNH 4500 RSH 4500 RCH 4500 MH 6500 The annual system audit carried out by TÜV PRODUCT SERVICE engineers will ensure the maintenance of these production standards.

Page A

The Quality is transparent General Catalogue

APPLICATIONS Here beside some winches applications.

Page B

The Quality is transparent General Catalogue

APPLICATIONS Here beside some winches applications.

Page C

The Quality is transparent General Catalogue

SERIE JE 3600 SERIE JE 2700 ELECTRIC WORM GEAR WITH SPUR GEAR WINCH PERFORMANCE • Gear ratio JE 3600 470:1 JE 2700 360:1 • Pulling capacity 1st layer JE 3600 3600 Kg.[8000 lbs.] JE 2700 2700 Kg.[6000 lbs.] • Speed line (no load) JE 3600 470:1:

1st layer 4,5 mt./min.[14,7 ft./min.] • Speed line (no load) JE 2700 360:1:

1st layer 5,2 mt./min.[17,0 ft./min.] FEATURES • Worm gear in oil bath with spur gear in grease bath

(gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Electric motor 12V or 24V dc • Handle Remote control with Red Emergency Stop button and Battery switch CE

compliant • Standard mounting angles • Drum length (distance between drum flanges):

JEC short drum 162 mm [6,4 in] JEM medium drum 211 mm [8,3 in] JEL long drum 350 mm [13,8 in]

• Drum barrel dia.90 mm [3,5 in] • Wire rope recommended dia. 8 mm [5/16”] SERIE JE 2700

Wire rope recommended dia.10 mm [3/8”] SERIE JE 3600 COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized roller fairlead

• Galvanized level winder, not available for JEM medium drum model

SERIE JE 3000 SERIE JE 2300 ELECTRIC WORM GEAR WITH SPUR GEAR WINCH PERFORMANCE • Gear ratio JE 3000 470:1 JE 2300 360:1 • Pulling capacity 1st layer JE 3000 3000 Kg. [6600 lbs.] JE 2300 2300 Kg. [5100 lbs.] • Speed line (no load) JE 3000 470:1:

1st layer 4,5 mt./min.[14,7 ft./min.] • Speed line (no load) JE 2300 360:1:

1st layer 5,2 mt./min.[17,0 ft./min.] FEATURES • Worm gear in oil bath with spur gear in grease bath

(gear in special bronze aluminium) • Worm gear provides load riverse protection • Manual Clutch for drum Freespooling • Electric motor 12V or 24V dc • Handle Remote control with Red Emergency Stop button and Battery switch CE

compliant • Standard mounting angles • Drum length (distance between drum flanges):

JEC short drum 162 mm [6,4 in] JEM medium drum 211 mm [8,3 in] JEL long drum 350 mm [13,8 in]

• Drum barrel dia.90 mm [3,5 in] • Wire rope recommended dia.10 mm [3/8”] SERIE JE 2300

Wire rope recommended dia.11 mm [7/16”] SERIE JE 3000 COMPLIANCE • CE Machinery Directive 98/37/EEC • TÜV Süddeutschland certification according: EN ISO 12100 - 1:2003 EN ISO 12100 - 2:2003 BGV D 8: 1996

ACCESSORIES

• Galvanized roller fairlead

• Galvanized level winder, not available for JEM medium drum model

Page 1

The Quality is transparent General Catalogue

SERIE JES 1300 SERIE JE 1000 ELECTRIC WORM GEAR WITH SPUR GEAR WINCH PERFORMANCE • Gear ratio JES 1300 470:1 JES1000 360:1 • Pulling capacity 1st layer JES 1300 1300 Kg.[2865 lbs.] JES 1000 1000 Kg.[2200 lbs.] • Speed line (no load) JES 1300 470:1:

1st layer 6,5 mt./min.[21,3 ft/Min.] • Speed line (no load) JES 1000 360:1:

1st layer 7,5 mt./min.[24,6 ft/Min.] FEATURES • Worm gear in oil bath with spur gear in grease bath

(gear in special bronze aluminium) • Worm gear provides load riverse protection • Electric motor 12V or 24V dc • Handle Remote control with Red Emergency Stop button and Battery switch CE

compliant • Grooved drum • Drum length (distance between drum flanges):

JES standard drum 132 mm [5,2 in] • Drum barrel dia.125 mm [4,9 in] • Wire rope recommended dia.6 mm [7/32”] COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized level winder

SERIE ZE 4000 ELECTRIC WORM GEAR WITH SPUR GEAR WINCH PERFORMANCE • Gear ratio ZE 4000 480:1 • Pulling capacity 1st layer ZE 4000 4000 Kg.[9000 lbs.] • Speed line (no load):

1st layer 4,5 mt./min.[14,7 ft/Min.] FEATURES • Worm gear in oil bath with spur gear in grease bath • Worm gear provides load riverse protection • Manual Clutch for drum Freespooling • Electric motor 12V or 24V dc • Handle Remote control with Red Emergency Stop button and Battery switch CE

compliant • Drum length (distance between drum flanges):

ZEC short drum 160 mm [6,3 in] ZEL long drum 240 mm [9,4 in]

• Drum barrel dia.83 mm [3,3 in] • Wire rope recommended dia.10 mm [3/8”] COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized roller fairlead

• Galvanized level winder

• Galvanized mounting plate with spacers

Page 2

The Quality is transparent General Catalogue

SERIE JH 3600 SERIE JH 2700 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio JH 3600 60:1 JH 2700 46:1 • Pulling capacity 1st layer JH 3600 3600 kg.[8000 lbs.] JH 2700 2700 kg.[6000 lbs.] • Speed line (based on 40 lt/Min. [10,5 gpm] oil supply) JH 3600 60:1 :

1st layer 4,2 mt./min. [13,8 ft./min.] 5th layer 7,7 mt./min. [25,3 ft./min.]

• Speed line (based on 40 lt/min. [10,5 gpm] oil supply) JH 2700 46:1 : 1st layer 5,4 mt./min. [17,7 ft./min.] 1st layer 9,0 mt./min. [29,5 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Standard mounting angles • Hydraulic orbital motor • Drum length (distance between drum flanges):

JHC short drum 162 mm [6,4 in] JHM medium drum 211mm [8,3 in] JHL long drum 350 mm [13,8 in]

• Drum barrel dia.90 mm [3,5 in] • Wire rope recommended dia.8 mm [5/16”] SERIE JH 2700 • Wire rope recommended dia.10 mm [3/8”] SERIE JH 3600 COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized standard roller fairlead

• Galvanized level winder, not available for JHM medium drum model

• Air Clutch for drum Freespooling

SERIE JH 3000 SERIE JH 2300 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio JH 3000 60:1 JH 2300 46:1 • Pulling capacity 1st layer JH 3000 3000 kg. [6600 lbs.] JH 2300 2300 kg. [5100 lbs.] • Speed line (based on 40 lt/min. [10,5 gpm] oil supply) JH 3000 60:1:

1st layer 4,2 mt./min. [13,8 ft./min.] 5th layer 8,1 mt./min. [26,5 ft./min.]

• Speed line (based on 40 lt/min. [10,5 gpm] oil supply) JH 2300 46:1: 1st 5,4 Mt./min. [17,7 ft./min.] 5th 9,9 Mt./min. [29,5 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Standard mounting angles • Hydraulic orbital motor • Drum length (distance between drum flanges):

JHC short drum 162 mm [6,4 in] JHM medium drum 211 mm [8,3 in] JHL long drum 350 mm [13,8 in]

• Drum barrel dia.90 mm [3,5 in] • Wire rope recommended dia.10 mm [3/8”] SERIE JH 2300 • Wire rope recommended dia.11 mm [7/16”] SERIE JH 3000 COMPLIANCE • CE Machinery Directive 98/37/EEC • TÜV Süddeutschland certification according: EN ISO 12100 - 1:2003 EN ISO 12100 - 2:2003 BGV D 8: 1996

ACCESSORIES

• Galvanized standard roller fairlead

• Galvanized level winder, not available for JHM medium drum model

• Air Clutch for drum Freespooling

Page 3

The Quality is transparent General Catalogue

SERIE JHD 2300 SERIE JHD 2000 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio JHD 2300 60:1 JHD 2000 46:1 • Pulling capacity 1st layer JHD 3000 3000 kg. [6600 lbs.] JHD 2000 2000 kg. [4400 lbs.] • Speed line (based on 40 lt/min. [10,5 gpm] oil supply) JHD 2300 60:1:

1st layer 5,4 mt./min. [17,7 ft./min.] 4th layer 8,0 mt./min. [26,2 ft./min.]

• Speed line (based on 40 lt/Min. [10,5 gpm] oil supply) JHD 2000 46:1: 1st layer 6,9 mt./min. [22,6 ft./min.] 4th layer 10,0 mt./min. [32,8 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Standard mounting angles • Hydraulic orbital motor • Drum length (distance between drum flanges):

JHD standard drum 284 mm [11,2 in] • Drum barrel dia.117 mm [4,6 in] • Wire rope recommended dia.9 mm • Wire rope recommended dia.10 mm [3/8”] COMPLIANCE • CE Machinery Directive 98/37/EEC • TÜV Süddeutschland certification according: EN ISO 12100 - 1:2003 EN ISO 12100 - 2:2003 BGV D 8: 1996

ACCESSORIES

• Galvanized standard roller fairlead

• Air Clutch for drum Freespooling

SERIE ZH 3000 SERIE ZH 2200 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio ZH 3000 50:1 JH 2200 38:1 • Pulling capacity 1st layer ZH 3000 3000 kg.[6600 lbs.] ZH 2200 2200 kg.[4850 lbs.] • Speed line (based on 40 lt/min. [10,5 gpm] oil supply) ZH 3000 50:1:

1st layer 4,7 mt./min. [15,4 ft./min.] 5th layer 7,9 mt./min. [25,3 ft./min.]

• Speed line (based on 40 lt/Min. [10,5 gpm] oil supply) ZH 2200 38:1: 1st layer 5,9 mt./min. [19,4 ft./min.] 5th layer 9,1 mt./min. [29,9 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Compact hydraulic orbital motor • Drum length (distance between drum flanges):

ZHC short drum 160 mm [6,3 in] ZHL long drum 240 mm [9,4 in]

• Drum barrel dia.83 mm [3,3 in] • Wire rope recommended dia.8 mm [5/16”] • Wire rope recommended dia.10 mm [3/8”] COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized standard roller fairlead

• Galvanized level winder

Page 4

The Quality is transparent General Catalogue

SERIE EPH 3600 HYDRAULIC PLANETARY WINCH PERFORMANCE • Gear ratio 5,3:1 • Pulling capacity 1st layer 3600 kg. [8000 lbs.] • Speed line (based on 60 lt/min. [16 gpm] oil supply):

1st layer 16,5 mt./min. [54,1 ft./min.] 5th layer 28,4 mt./min. [93,2 ft./min.]

FEATURES • Single stage hardened steel planetary gears in oil bath • Automatic high performance brake system in oil bath • Manual Clutch for drum Freespooling • Hydraulic orbital motor • Drum length (distance between drum flanges):

EPH 3600 standard drum 200 mm [7,9 inch] EPH/L 3600 long drum 252 mm [9,9 inch]

• Drum barrel dia.102 mm [4,0 inch] • Wire rope recommended dia.10 mm [3/8”] COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers in steel)

• Galvanized level winder

• Air clutch for drum Freespooling

• Over-centre valve

SERIE EPH 4500 HYDRAULIC PLANETARY WINCH PERFORMANCE • Gear ratio 5,3:1 • Pulling capacity 1st layer 4500 kg. [10000 lbs.] • Speed line (based on 60 lt/min. [16 gpm] oil supply):

1st layer 13,3 mt./min. [43,6 ft./min.] 4th layer 21,6 mt./min. [70,9 ft./min.]

FEATURES • Single stage hardened steel planetary gears in oil bath • Automatic high performance brake system in oil bath • Over-centre valve • Manual Clutch for drum Freespooling • Hydraulic orbital motor • Drum length (distance between drum flanges):

EPH/C 4500 short drum 200 mm [7,9 in] EPH 4500 standard drum 252 mm [9,9 in]

• Drum barrel dia.102 mm [4,0 in] • Wire rope recommended dia.12 mm COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers in steel)

• Galvanized level winder

• Air clutch for drum Freespooling

Page 5

The Quality is transparent General Catalogue

SERIE EPH 5200 HYDRAULIC PLANETARY WINCH PERFORMANCE • Gear ratio 5,3:1 • Pulling capacity 1st layer 5200 kg. [11500 lbs.] • Speed line (based on 60 lt/min. [16 gpm] oil supply):

1st layer 10,4 mt./min. [34,1 ft./min.] 5th layer 19,3 mt./min. [63,3 ft./min.]

FEATURES • Single stage hardened steel planetary gears in oil bath • Automatic high performance brake system in oil bath • Over-centre valve with Limiting Pressure device • Manual Clutch for drum Freespooling • Hydraulic orbital motor • Drum length (distance between drum flanges):

EPH 5200 standard drum 252 mm [9,9 in] • Drum barrel dia.102 mm [4,0 in] • Wire rope recommended dia.12 mm COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers in steel)

• Galvanized level winder

• Air clutch for drum Freespooling

SERIE EPH 6800 HYDRAULIC PLANETARY WINCH PERFORMANCE • Gear ratio 5,3:1 • Pulling capacity 1st layer 6800 kg. [15000 lbs.] • Speed line (based on 60 lt/min. [16 gpm] oil supply):

1st layer 8,2 mt./min. [26,9 ft./min.] 5th layer 15,2 mt./min. [49,9 ft./min.]

FEATURES • Single stage hardened steel planetary gears in oil bath • Automatic high performance brake system in oil bath • Over-centre valve • Manual Clutch for drum Freespooling • Hydraulic orbital motor • Drum length (distance between drum flanges):

EPH 6800 standard drum 252 mm [9,9 in] • Drum barrel dia.102 mm [4,0 in] • Wire rope recommended dia.13 mm [1/2”] COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers in steel)

• Galvanized level winder

• Air clutch for drum Freespooling

Page 6

The Quality is transparent General Catalogue

SERIE EPH 3600FN HYDRAULIC PLANETARY WINCH PERFORMANCE • Gear ratio 5,3:1 • Pulling capacity 1st layer 3600 kg. [8000 lbs.] • Speed line (based on 60 lt/min. [16 gpm] oil supply):

1st layer 16,5 mt./min. [54,1 Ft./min.] 5th layer 28,4 mt./min. [93,2 Ft./min.]

FEATURES • Single stage hardened steel planetary gears in oil bath • Hydraulic multi disc negative brake system • Over-centre valve • Manual Clutch for drum Freespooling • Hydraulic orbital motor • Drum length (distance between drum flanges):

EPH 3600 FN standard drum 200 mm [7,9 in] EPH/L 3600 FN long drum 252 mm [9,9 in]

• Drum barrel dia.102 mm [4,0 in] • Wire rope recommended dia.10 mm [3/8”] • Wire rope recommended dia.12 mm VBG 8 TÜV COMPLIANCE • CE Machinery Directive 98/37/EEC • TÜV Süddeutschland certification according: EN ISO 12100 - 1:2003 EN ISO 12100 - 2:2003 BGV D 8: 1996

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers in steel)

• Galvanized level winder

• Air clutch for drum Freespooling

SERIE EPH 4500FN HYDRAULIC PLANETARY WINCH PERFORMANCE • Gear ratio 5,3:1 • Pulling capacity 1st layer 4500 kg. [10000 lbs.] • Speed line (based on 60 lt/min. [16 gpm] oil supply):

1st layer 13,3 mt./min. [43,6 ft./min.] 4th layer 21,6 mt./min. [70,9 ft./min.]

FEATURES • Single stage hardened steel planetary gears in oil bath • Hydraulic multi disc negative brake system • Over-centre valve • Manual Clutch for drum Freespooling • Hydraulic orbital motor • Drum length (distance between drum flanges):

EPH 4500 FN standard drum 252 mm [9,9 in] • Drum barrel dia.102 mm [4,0 in] • Wire rope recommended dia.12 mm COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers in steel)

• Galvanized level winder

• Air clutch for drum Freespooling

Page 7

The Quality is transparent General Catalogue

SERIE EPH 6000FN HYDRAULIC PLANETARY WINCH PERFORMANCE • Gear ratio 5,3:1 • Pulling capacity 1st layer 6000 kg. [13300 lbs.] • Speed line (based on 60 lt/min. [16 gpm] oil supply):

1st layer 8,2 mt./min. [26,9 ft./min.] 5th layer 15,2 mt./min. [49,9 ft./min.]

FEATURES • Single stage hardened steel planetary gears in oil bath • Hydraulic multi disc negative brake system • Over-centre valve • Manual Clutch for drum Freespooling • Hydraulic orbital motor • Drum length (distance between drum flanges):

EPH 6000 FN standard drum 252 mm [9,9 in] • Drum barrel dia.102 mm [4,0 in] • Wire rope recommended dia.13 mm [1/2”] COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers in steel)

• Galvanized level winder

• Air clutch for drum Freespooling

SERIE EPH 6800FN HYDRAULIC PLANETARY WINCH PERFORMANCE • Gear ratio 5,3:1 • Pulling capacity 1st layer 6800 kg. [15000 lbs.] • Speed line (based on 60 lt/min. [16 gpm] oil supply):

1st layer 8,2 mt./min. [26,9 ft./min.] 5th layer 15,5 mt./min. [49,9 ft./min.]

FEATURES • Single stage hardened steel planetary gears in oil bath • Hydraulic multi disc negative brake system • Over-centre valve • Manual Clutch for drum Freespooling • Hydraulic orbital motor • Drum length (distance between drum flanges):

EPH 6800 FN standard drum 252 mm [9,9 in] • Drum barrel dia.102 mm [4,0 in] • Wire rope recommended dia.13 mm [1/2”] COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers in steel)

• Galvanized level winder

• Air clutch for drum Freespooling

Page 8

The Quality is transparent General Catalogue

SERIE EPH 10000 HYDRAULIC PLANETARY WINCH PERFORMANCE • Gear ratio 22,1:1 • Pulling capacity 1st layer 10000 kg. [22000 lbs.] • Speed line (based on 75 lt/min. [20 gpm] oil supply):

1st layer 9,0 mt./min. [29,5 ft./min.] 5th layer 16,8 mt./min. [55,1 ft./min.]

FEATURES • Two stage hardened steel planetary gears in oil bath • Hydraulic multi disc negative brake system • Over-centre valve • Air Clutch for drum Freespooling • Standard mounting angles • Hydraulic orbital motor • Drum length (distance between drum flanges):

EPH 10000 standard drum 335 mm [13,2 in] • Drum barrel dia.127 mm [5,0 in] • Wire rope recommended dia.16 mm [5/8”] COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers on bearings)

• Galvanized level winder (roller on bearings)

SERIE EPH 13200 HYDRAULIC PLANETARY WINCH PERFORMANCE • Gear ratio 16,68:1 • Pulling capacity 1st layer 13200 kg. [29100 lbs.] • Speed line (based on 75 lt/min. [20 gpm] oil supply):

1st layer 7,4 mt./min. [24,3 ft./min.] 5th layer 14,0 mt./min. [45,9 ft./min.]

FEATURES • Two stage hardened steel planetary gears in oil bath • Hydraulic multi disc negative brake system • Over-centre valve • Air Clutch for drum Freespooling • Standard mounting angles • Hydraulic orbital motor • Drum length (distance between drum flanges):

EPH 13200 standard drum 335 mm [13,2 in] • Drum barrel dia.127 mm [5,0 in] • Wire rope recommended dia.18 mm [11/16”] COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers on bearings)

• Galvanized level winder (roller on bearings)

Page 9

The Quality is transparent General Catalogue

SERIE RNH 4500 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio 29:1 • Pulling capacity 1st layer 4500 kg. [10000 lbs.] • Speed line (based on 60 lt/min. [16 gpm] oil supply):

1st layer 5,2 mt./min. [17,0 ft./min.] 4th layer 8,9 mt./min. [29,2 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Standard mounting angles • Hydraulic orbital motor • Drum length (distance between drum flanges):

RNH 4500 standard drum 297,5 mm [11,7 in] • Drum barrel dia.95 mm [3,7 in] • Wire rope recommended dia.12 mm • Wire rope recommended dia.13 mm [1/2”] COMPLIANCE • CE Machinery Directive 98/37/EEC • TÜV Süddeutschland certification according: EN ISO 12100 - 1:2003 EN ISO 12100 - 2:2003 BGV D 8: 1996

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers in steel)

• Galvanized level winder

• Galvanized standard roller fairlead

• Air Clutch for drum Freespooling

SERIE RNH 5400 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio 29:1 • Pulling capacity 1st layer 5400 kg. [12000 lbs.] • Speed line (based on 60 lt/min. [16 gpm] oil supply):

1st layer 4,4 mt./min. [14,4 ft./min.] 4th layer 7,3 mt./min. [24,0 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Standard mounting angles • Hydraulic orbital motor • Drum length (distance between drum flanges):

RNH 5400 standard drum 295 mm [11,7 in] • Drum barrel dia.95 mm [3,7 in] • Wire rope recommended dia.12 mm • Wire rope recommended dia.13 mm [1/2”] COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers in steel)

• Galvanized level winder

• Air Clutch for drum Freespooling

• Galvanized standard roller fairlead

Page 10

The Quality is transparent General Catalogue

SERIE RSH 4500 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio 29:1 • Pulling capacity 1st layer 4500 kg. [10000 lbs.] • Speed line (based on 60 lt/min. [16 gpm] oil supply):

1st layer 5,2 mt./min. [17,0 ft./min.] 5th layer 10,1 mt./min. [33,1 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Standard mounting angles • Hydraulic orbital motor • Drum with wide flanges dia. 268 mm [10,6 in] • Drum length (distance between drum flanges):

RSH 4500 standard drum 297,5 mm [11,7 in] • Drum barrel dia.95 mm [3,7 in] • Wire rope recommended dia.12 mm • Wire rope recommended dia.13 mm [1/2”] COMPLIANCE • CE Machinery Directive 98/37/EEC • TÜV Süddeutschland certification according: EN ISO 12100 - 1:2003 EN ISO 12100 - 2:2003 BGV D 8: 1996

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers in steel)

• Galvanized level winder

• Galvanized standard roller fairlead

• Air clutch for drum Freespooling

SERIE RSH 5400 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio 29:1 • Pulling capacity 1st layer 5400 kg. [12000 lbs.] • Speed line (based on 60 lt/min. [16 gpm] oil supply):

1st layer 4,4 mt./min. [14,4 ft./min.] 5th layer 8,3 mt./min. [27,2 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Standard mounting angles • Hydraulic orbital motor • Drum with wide flanges dia. 268 mm [10,6 in] • Drum length (distance between drum flanges):

RSH 5400 standard drum 295 mm [11,7 in] • Drum barrel dia.95 mm [3,7 in] • Wire rope recommended dia.12 mm • Wire rope recommended dia.13 mm [1/2”] COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers in steel)

• Galvanized level winder

• Galvanized standard roller fairlead

• Air clutch for drum Freespooling

Page 11

The Quality is transparent General Catalogue

SERIE RCH 4500 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio 29:1 • Pulling capacity 1st layer 4500 kg. [10000 lbs.] • Speed line (based on 60 lt/min. [16 gpm] oil supply):

1st layer 5,0 mt./min. [16,4 ft./min.] 5th layer 9,9 mt./min. [32,5 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Standard mounting angles • Compact hydraulic orbital motor • Drum with wide flanges dia. 268 mm [10,6 in] • Drum length (distance between drum flanges):

RCH 4500 standard drum 295 mm [11,7 in] • Drum barrel dia.95 mm [3,7 in] • Wire rope recommended dia.12 mm • Wire rope recommended dia.13 mm [1/2”] COMPLIANCE • CE Machinery Directive 98/37/EEC • TÜV Süddeutschland certification according: EN ISO 12100 - 1:2003 EN ISO 12100 - 2:2003 BGV D 8: 1996

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers in steel)

• Galvanized level winder

• Galvanized standard roller fairlead

• Air Clutch for drum Freespooling

SERIE RCH 5400 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio 29:1 • Pulling capacity 1st layer 5400 kg. [12000 lbs.] • Speed line (based on 60 lt/min. [16 gpm] oil supply):

1st layer 4,4 mt./min. [14,4 ft./min.] 5th layer 8,3 mt./min. [27,2 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Standard mounting angles • Compact hydraulic orbital motor • Drum with wide flanges dia.268 mm [10,6 in] • Drum length (distance between drum flanges):

RCH 5400 standard drum 295 mm [11,7 in] • Drum barrel dia.95 mm [3,7 in] • Wire rope recommended dia.12 mm • Wire rope recommended dia.13 mm [ 1/2”] COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers in steel )

• Galvanized level winder

• Galvanized standard roller fairlead

• Air Clutch for drum Freespooling

Page 12

The Quality is transparent General Catalogue

SERIE TH 6000 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio 29:1 • Pulling capacity 1st layer 6000 kg. [13300 lbs.] • Speed line (based on 100 lt/min. Oil supply):

1st layer 7,2 mt./min. [23,6 ft./min.] 5th layer 14,0 mt./min. [45,9 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Standard mounting angles • Hydraulic orbital motor • Drum length (distance between drum flanges):

TH 6000 standard drum 308 mm [12,1 in] • Drum barrel dia.127 mm [5,0 in] • Wire rope recommended dia.16 mm [5/8”] COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers on bearings)

SERIE MH 9000 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio 35:1 • Pulling capacity 1st layer 9000 kg. [20000 lbs.] • Speed line (based on 100 lt/min. Oil supply):

1st layer 4,6 mt./min. [15,0 ft./min.] 5th layer 9,2 mt./min. [30,2 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Standard mounting angles • Hydraulic orbital motor • Drum length (distance between drum flanges):

MH 9000 standard drum 278 mm [10,9 in] • Drum barrel dia.114 mm [4,5 in] • Wire rope recommended dia.15 mm • Wire rope recommended dia.16 mm [5/8”] • COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers on bearings)

• Galvanized level winder

• Air Clutch for drum Freespooling

Page 13

The Quality is transparent General Catalogue

SERIE WH 17500 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio 35:1 • Pulling capacity 1st layer 17500 kg.[38600 lbs.] • Speed line (based on 160 lt/min. [42,3 gpm] oil supply):

1st layer 5,2 mt./min. [17,0 ft./min.] 5th layer 9,8 mt./min. [32,2 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Standard mounting angles • Hydraulic orbital motor • Drum length (distance between drum flanges):

WHC 17500 short drum 230 mm [9,1 in] WHL 17500 long drum 460 mm [18,1 in]

• Drum barrel dia.168 mm [6,6 in] • Wire rope recommended dia.20 mm [3/4”] • Wire rope recommended dia.22 mm [7/8”] COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized Heavy-duty roller fairlead (rollers on bearings)

• Galvanized level winder (roller on bearings)

• Air Clutch for drum Freespooling

Page 14

The Quality is transparent General Catalogue

SERIE NH 20000 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio 30:1 • Pulling capacity 1st layer 20000 kg. [44000 lbs.] • One Speed Hydraulic radial motor 792 cc or 714 cc

Speed line (based on 198 lt/min. [52,3 gpm] oil supply): 1st layer 5,4 mt./min.[17,7 ft./min.] - 1st layer 6,0 mt./min.[19,7 ft./min.] 5th layer 9,8 mt./min.[32,2 ft./min.] - 5th layer 10,8 mt./min.[35,4 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Hydraulic radial motor available in two different displacements • Drum length (distance between drum flanges):

NH 20000 standard drum 396 mm [15,6 in] • Drum barrel dia.195 mm [7,7 in] • Wire rope recommended dia.22 mm [7/8”] • Wire rope recommended dia.24 mm COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized level winder (roller on bearings)

• Air Clutch for drum Freespooling

SERIE NH 25000 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio 30:1 • Pulling capacity 1st layer 25000 kg. [55000 lbs.] • One Speed Hydraulic radial motor 792 cc

Speed line (based on 198 lt/min. [52,3 gpm] oil supply): 1st layer 5,4 mt./min. [17,7 ft./min.] 5th layer 10,2 mt./min. [33,5 ft./min.]

• Two Speed Hydraulic radial motor Large Displacement 833 cc Speed line (based on 198 lt/min. [52,3 gpm] oil supply): 1st layer 5,2 mt./min. [17,0 ft./min.] 5th layer 9,7 mt./min. [31,8 ft./min.] Small Displacement 493 cc Speed line (based on 198 lt/min. [52,3 gpm] oil supply): 1st layer 8,8 mt./min. [28,9 ft./min.] 5th layer 16,4 mt./min. [53,8 ft./min.]

FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Hydraulic radial motor One or Two speed • Drum length (distance between drum flanges):

NH 25000 standard drum 396 mm [15,6 in] • Drum barrel dia.195 mm [7,7 in] • Wire rope recommended dia.24 mm • Wire rope recommended dia.26 mm • COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized level winder (roller on bearings)

• Air Clutch for drum Freespooling

Page 15

The Quality is transparent General Catalogue

SERIE PH 30000 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio 37:1 • Pulling capacity 1st layer 30000 kg. [66000 lbs.] • One speed Hydraulic radial motor 991cc or 792 cc Speed line (based on 198 lt/min. [52,3 gpm] oil supply): 1st layer 3,7 mt./min. [12,1 ft./min.] - 1st layer 4,6 mt./min. [15 ft./min.] 5th layer 7,0 mt./min. [ 23 ft./min.] - 5th layer 8,8 mt./min. [28,9 ft./min.] • Two speed Hydraulic radial motor Large Displacement 833 cc Speed line (based on 198 lt/Min. [52,3 gpm] oil supply): 1st layer 4,4 mt./min. [14,4 ft./min.] - 5th layer 8,4 mt./min. [27,6 ft./min.] Small Displacement 493 cc Speed line (based on 198 lt/Min. [52,3 gpm] oil supply): 1st layer 7,4 mt./min. [24,3 ft./min.] - 5th layer 14,2 mt./min. [46,6 ft./min.] FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Hydraulic radial motor One or Two speed • Drum length (distance between drum flanges):

PH 30000 standard drum 353 mm [13,9 in] • Drum barrel dia.203 mm [8,0 in] • Wire rope recommended dia.26 mm COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized level winder (roller on bearings)

• Air Clutch for drum Freespooling

SERIE PH 35000 HYDRAULIC WORM GEAR WINCH PERFORMANCE • Gear ratio 37:1 • Pulling capacity 1st layer 35000 kg. [77000 lbs.] • One speed Hydraulic radial motor 991cc or 792 cc Speed line (based on 198 lt/min. [52,3 gpm] oil supply): 1st layer 3,7 mt./min. [12,1 ft./min.] - 1st layer 4,6 mt./min. [15 ft./min.] 5th layer 7,0 mt./min. [ 23 ft./min.] - 5th layer 8,8 mt./min. [28,9 ft./min.] • Two speed Hydraulic radial motor Large Displacement 833 cc Speed line (based on 198 Lt/Min. [52,3 gpm] oil supply): 1st layer 4,4 mt./min. [14,4 ft./min.] - 5th layer 8,4 mt./min. [27,6 ft./min.] Small Displacement 493 cc Speed line (based on 198 lt/Min. [174,2 gpm] oil supply): 1st layer 7,4 mt./min. [24,3 ft./min.] - 5th layer 14,2 mt./min. [46,6 ft./min.] FEATURES • Worm gear in oil bath (gear in special bronze aluminium) • Worm gear provides load reverse protection • Manual Clutch for drum Freespooling • Hydraulic radial motor One or Two speed • Drum length (distance between drum flanges):

PH 35000 standard drum 353 mm [13,9 in] • Drum barrel dia.203 mm [8,0 in] • Wire rope recommended dia. 26 mm COMPLIANCE • CE Machinery Directive 98/37/EEC

ACCESSORIES

• Galvanized level winder (roller on bearings)

• Air Clutch for drum Freespooling

Page 16

The Quality is transparent General Catalogue