Ted Blanton Na Cb Presentation

OSHA 29 CFR Part 1926OSHA 29 CFR Part 1926Cranes & Derricks In ConstructionCranes & Derricks In Construction

Session Outline• 1926.1419 Signals –

General• 1926.1420 Signals – Radio,

etc.• 1926.1421 Signals – Voice• 1926.1422 Signals – Hand

Signals• 1926.1427 Operator

Certification & Qualification• 1926.1428 Signal Person

Qualifications• 1926.1429 Training

• Presented By:• Ted L. Blanton

President NACB, Inc.

[email protected]

(800) 654-5640

OSH

A 1

926.

1400

OSH

A 1

926.

1400

OSHA 29 CFR Part 1926OSHA 29 CFR Part 1926Cranes & Derricks In ConstructionCranes & Derricks In Construction

Effective Date: November 8, 2010• Employers Must Provide

• Qualified Riggers– Assembly/Disassembly

– 1926.1404 (r)(1)– Rigging Materials in the “Fall

Zone”– 1926.1425 (c)(3)

• Qualified Signal Persons– 1926.1428

OSH

A 1

926.

1400

OSH

A 1

926.

1400

OSHA §29 CFR Part 1926OSHA §29 CFR Part 1926Cranes & Derricks In ConstructionCranes & Derricks In Construction

Effective Date: November 8, 2010• Signal Persons are discussed

throughout the 1400 standard.• 1419 Signals – General• 1420 Signals – Radio, etc.• 1421 Signals – Voice• 1422 Signals – Hand Signals• 1428 Signal Person

Qualifications

OSH

A 1

926.

1400

OSH

A 1

926.

1400


Effective Date: November 8, 2010• Definitions

• Qualified Rigger– a “Qualified Rigger” is a rigger

who meets the criteria for a “Qualified Person”

• Qualified Person– means a person who, by

possession of a recognized degree, certificate, or professional standing, or who by extensive knowledge, training and experience, successfully demonstrated the ability to solve/resolve problems relating to the subject matter, the work, or the project.

OSH

A 1

926.

1401

OSH

A 1

926.

1401


Effective Date: November 8, 2010• How To Document a Qualified

Persons ability to solve/resolve work related problems (i.e. rigging, etc.)

• Academic– Degree (engineering, etc.)– Journey Level Certification (DOE

Approved Apprentice Program)– National Certification (NCCER,

NCCCO, CIC, etc.)– Certificate of Training from a

National Training Organization (NACB, CICB, CIA, etc.)

– Proof of Professional Standing

OSH

A 1

926.

1401

OSH

A 1

926.

1401


Effective Date: November 8, 2010• How To Document a Qualified

Persons ability to solve/resolve work related problems (i.e. rigging, etc.)

• Experience– Proof of Training

– Certificate of Training– Training Records– Successful Completion of a

Written Examination– Proof of Experience

– Work Records– Resume– Successful Completion of a

Practical Examination

OSH

A 1

926.

1401

OSH

A 1

926.

1401


Effective Date: November 8, 2010• 1419 States that a signal person

must be provided in each of the following situations:

• The point of operation, meaning the load travel or the area near or at load placement, is not in full view of the operator.

• When the equipment is traveling, the view in the direction of travel is obstructed.

• Due to site specific safety concerns, either the operator or the person handling the load determines that it is necessary.

OSH

A 1

926.

1419

OSH

A 1

926.

1419


Effective Date: November 8, 2010

• Effective 11/8/2010 Employers Must;• Ensure Operators Are

Competent And Safe (1926.1427 (k))

– Trained & Evaluated– Certification

Requirements Effective Nov.10, 2014

OSH

A 1

926.

1427

OSH

A 1

926.

1427


Effective Date: November 10, 2014• Effective 11/10/2014

Employers Must;• Ensure Operators Are Qualified

& Certified (1926.1427(a))• 1926.1427 (b) Option 1)

Certified by an Accredited Crane Operator Testing Organization

– NCCER– NCCCO (CCO)– CIC– Other

• Must be Portable• Must be Valid For 5 Years

OSH

A 1

926.

1427

OSH

A 1

926.

1427


Effective Date: November 10, 2014• Effective 11/10/2014

Employers Must;• Ensure Operators Are Qualified

& Certified• 1926.1427 (c) Option 2)

Qualification by an Audited Employer Program

– Written & Practical Testing– Audited By an Option 1

Organization• May Not be Portable• Must be Valid For 5 YearsO

SHA

192

6.14

27O

SHA

192

6.14

27


Effective Date: November 10, 2014• Effective 11/10/2014 The

following applies;• Pre-Qualification/Certification

Training Period (1926.1427 (f))– All Operators Not Certified May Only

Operate As An Operator-in-training (OIT).

– Must Be Provided Sufficient Training– Tasks Performed During Training

Within Trainees Capability– Trainer

– Employee or Agent– Certified Operator, or– Passed Written– Familiar with Controls– No Distractions

OSH

A 1

926.

1427

OSH

A 1

926.

1427


Effective Date: November 8, 2010• 1428 Signals –Signal Person

Qualification:• Ensure Signal Persons Are

Qualified (2 Options)– Option1) 3rd Party, or– Option 2) In-House

Qualified Evaluator

OSH

A 1

926.

1428

OSH

A 1

926.

1428



Qualification:• Qualification Requirements

– Know & Understand Types of Signals to be Used

– Be Competent in there Application

– Have a Basic Understanding Of Equipment;

– Operation & Limitations– Load Dynamics

» Swinging &» Stopping of Load

– Boom Deflection from Hoisting

OSH

A 1

926.

1428

OSH

A 1

926.

1428



Qualification:• Qualification Requirements

– Know & Understand– 1926.1419– 1926.1420– 1926.1421– 1926.1422 &– 1926.1428

– Demonstrate Requirements Through both;

– Written (or Oral) Testing– Practical Testing.O

SHA

192

6.14

28O

SHA

192

6.14

28


Effective Date: November 8, 2010

• Effective 11/8/2010 Employers Must;• Have Provided Training

as Follows:– On Overhead Power Lines– To Signal Persons– To Operators– To Competent & Qualified

Persons– On Crush/Pinch Points– On Tag-Out

• Training AdministrationOSH

A 1

926.

1430

OSH

A 1

926.

1430

Ted Blanton Na Cb Presentation

Documents

Transcript of Ted Blanton Na Cb Presentation