Setal 1603 en Setalux 1903 BA-75
Transcript of Setal 1603 en Setalux 1903 BA-75
Setalux® 1903 BA-75
and Setal® 1603 BA-78
Excellent resins for high solid topcoat systems
SERVICE AND RESEARCH LEAD THE WAY
R E S I N S
Akzo Nobel Resins has introduced two solventborne resins for VOC-compliant two-component topcoat systems for
Vehicle Ref inishes and Commercial Transport coatings. Our products Setalux® 1903 BA-75, an acrylic polyol and
Setal® 1603 BA-78, a polyester polyol, or combinations of both, offer an excellent balance between VOC and drying
properties in clearcoat and solid colour topcoat formulations. When combined with aliphatic poly-isocyanates they form
coatings with perfect mechanical properties and good weather resistance. These resins can be used in ambient curing as
well as in forced drying systems.
Setalux® 1903 BA-75 is an acrylic polyol with 4.5% OH (calculated on
non-volatiles) and is supplied at 75% non-volatiles in butyl acetate. In
combination with aliphatic isocyanate resins, it will give fast drying
VOC-compliant (420 g/l ) coat ings with good chemical resistance,
good appearance and good outdoor durability.
Setal® 1603 BA-78 is a polyester polyol with 5.4% OH (calculated on
non-volatiles) and is supplied at 78% non-volatiles in butyl acetate. In
combination with aliphatic isocyanates it will give VOC-compliant (400 g/l)
coatings with good drying properties at elevated temperatures, good
through hardening and good outdoor durability.
Setalux® 1903 BA-75 and Setal® 1603 BA-78 can both be used as single
binder or in combination with each other. For example, a combination of 70
solids parts Setalux® 1903 BA-75 with 30 solids parts Setal® 1603 BA-78
will give coatings with a good balance in viscosity, drying performance,
chemical resistance and outdoor durability.
Setalux® 1903 BA-75 and Setal®1603 BA-78 are dilutable with many
solvents and are compatible with many binders. Both resins have good
pigment wetting properties making high gloss topcoats possible.
Akzo Nobel Resins
www.akzonobelresins.com E-mail : [email protected]
TECHNICAL FEATURES
March 2003
Disclaimer
All information, recommendations and suggestions appearing in this literature, concerning the use of the products described, are based upon tests and data believed to be reliable. However, Akzo
Nobel Resins gives no assurance as to the accuracy, completeness, or adequacy for a particular purpose of the contents of this literature. It is the users responsibility to determine the suitability
for its own use of the products described in such literature. No guarantee (whether expressed or implied) is made by Akzo Nobel Resins as to the results to be obtained from using the described
products, nor shall Akzo Nobel Resins be liable for any use by others of the described products. Additional information to that described in this literature or authorizations may be required, for
example, when particular or exceptional conditions or circumstances are contemplated or because of relevant laws or government regulations. Nothing in this literature shall be construed as
authorization or recommendation to infringe any patent. Our products for the coatings industry are marketed under brand names, such as Setal, Setalux and Setamine, which are registered
trademarks in one or more countries.All orders accepted shall be subject to the standard conditions of sale of the manufacturer, Akzo Nobel Resins.
SETALUX® 1903 BA-75 An acrylic polyol with 4.5% OH (calculated on non-volatiles)
Setalux® 1903 BA-75 provides VOC compliant coatings (420 g/l)
with high build and gloss, good mechanical properties,
good chemical resistance and good outdoor durabili ty
(in combination with aliphatic poly-isocyanates).
Appl ication
1 two-component clearcoats and solid colour topcoats for vehicle
refinishes
2 two-component commercial transport topcoats.
Solvent composition
Butyl acetate
Specifications
Non-volatiles : 74 – 76 %
Acid value (as such) : 4.4 – 7.6 mg KOH/g
Viscosity, 100 s-1, 23°C : 5.0 – 10 Pa.s at 75%
Colour (Lico 200) : max. 50 Apha
Appearance : clear
Typical properties
Density at 20°C : 1.06 kg/dm3
Flash point : 28 °C
Starting point formulations
REC03001 white topcoat
(combined with Setal® 1603)
REC03003 clearcoat
REC03005 clearcoat
(combination with Setal® 1603)
TECHNICAL FEATURES
Setal® 1603 BA-78 provides VOC compliant coatings (400 g/l)
with high build and gloss, very good outdoor durability,
good mechanical properties and good chemical resistance
(in combination with aliphatic poly-isocyanates).
Applicat ion
1 two-component clearcoats and solid colour topcoats for vehicle
refinishes
2 co-binder for combination with acrylic resins for two-component
systems with reduced VOC
Solvent composition
Butyl acetate
Specifications
Non-volatiles : 75 – 77 %
Acid value (as such) : 13 – 18 mg KOH/g
Viscosity, 100 s-1, 23°C : 4.0 – 8.0 Pa.s
Colour (Lico 200) : max. 150 Apha
Appearance : clear
Typical properties
Density at 20°C : 1.08 kg/dm3
Flash point : 30 °C
Starting point formulations
REC03001 white topcoat
(combined with Setalux® 1903)
REC03004 clearcoat
REC03005 clearcoat
(combined with Setalux® 1903)
CREATING THE SOLUTION TOGETHER
SETAL® 1603 BA-78 A polyester polyol resin with 5.4% OH (calculated on non-volati les)
A
K
2
0
0
1
-
U
K