SEPARATOR & FILTER PRODUCT LINE

WATER - OIL - GAS

Pipeline Oil & Gas Equipment, Inc. Web Page: www.pipe-equip.com - E-Mail: info@pipe-equip.com

Tel: (936) 321 6963 - Fax: (936) 273 5150

LINE SEPARATOR

• APPLICATION: RELATIVELY CONSTANT GAS AND LIQUID FLOWS; NO SLUGGING, LOW LIQUID/GAS RATIOS. • PRESSURE DROP: 0.1-1.0 PSI AT MAXIMUM RATED CAPACITY. • EFFICIENCY: 100% REMOVAL OF ALL DROPLETS GREATER THAN 10 MICRONS. • OTHER: AGGLOMERATORS AVAILABLE TO COALESCE SMALL DROPLETS IN INLET NOZZLE. • VANE TYPES: STANDARD OR DOUBLE POCKET.

VERTICAL SEPARATORS

• APPLICATION: HIGH LIQUID/GAS RATIOS COINCIDENT WITH HIGH GAS RATES; LIQUID SLUGS. • PRESSURE DROP: 1.0-1.5 PSI AT MAXIMUM RATED CAPACITY. • EFFICIENCY: 100% REMOVAL OF ALL DROPLETS GREATER THAN 10 MICRONS IN DIAMETER OR OUTLET ENTRAINMENT WILL BE LESS THAN 0.1 GALLON PER MMSCF. • OTHER: AVAILABLE WITH VARIOUS INLET DEVICES FOR DIFFERENT LIQUID/GAS RATIOS. • VANE TYPES: STANDARD OR DOUBLE POCKET.

HORIZONTAL SEPARATORS

• APPLICATION: HIGH LIQUID/GAS RATIOS COINCIDENT WITH HIGH GAS RATES; LIQUID SLUGS; MULTI-PHASE. • PRESSURE DROP: 0.75-1.0 PSI AT MAXIMUM RATED CAPACITY. • EFFICIENCY: 100% REMOVAL OF ALL DROPLETS GREATER THAN 10 MICRONS IN DIAMETER OR OUTLET ENTRAINMENT WILL BE LESS THAN 0.1 GALLON PER MMSCF. • OTHER: AVAILABLE WITH VARIOUS INLET DEVICES, BAFFLES, WEIRS, ETC • VANE TYPES: STANDARD OR DOUBLE POCKET.

THREE-PHASE SEPARATOR

• APPLICATION: LIQUID, GAS AND HYDROCARBON SEPARATION. HIGH LIQUID/GAS RATIOS COINCIDENT WITH HIGH GAS RATES; LIQUID SLUGS; MULTI-PHASE. • PRESSURE DROP: 0.75-1.0 PSI AT MAXIMUM RATED CAPACITY. • EFFICIENCY: 100% REMOVAL OF ALL DROPLETS GREATER THAN 10 MICRONS IN DIAMETER OR OUTLET ENTRAINMENT WILL BE LESS THAN 0.1 GALLON PER MMSCF. • OTHER: AVAILABLE WITH VARIOUS INLET DEVICES, BAFFLES, WEIRS, ETC. • VANE TYPES: STANDARD.

DRY SCRUBBERS

• APPLICATION: LIQUID AND SOLIDS PRESENT IN A GAS STREAM CAN ACCOMMODATE LIQUID SLUGGING WITH SOME DESIGN MODIFICATIONS. • PRESSURE DROP: 0.1-10.0 PSI (DEPENDING ON OPERATING PRESSURE) AT MAXIMUM RATED CAPACITY. • EFFICIENCY: SOLIDS: 100% OF ALL SOLID PARTICLES GREATER THAN 10 MICRONS IN DIAMETER. LIQUIDS: LIQUID ENTRAINMENT LESS THAN 0.1 GALLONS PER MMSCF. • OTHER: LIMITED TO 4:1 TURNDOWN RATIO; BLOCKING TUBES AVAILABLE. • VANE TYPES: 2.0 INCH & 4.5 INCH (DEPENDING ON VESSEL SIZE AND APPLICATION).

GAS FILTERS

• APPLICATION: REMOVAL OF SOLID PARTICLES FROM A GAS STREAM; NOT FOR HIGH SOLIDS CONCENTRATIONS. • PRESSURE DROP: 0.25 TO 2.0 PSI AT MAXIMUM RATED CAPACITY, WHEN CLEAN. • EFFICIENCY: SOLIDS: 100% REMOVAL OF ALL PARTICLES GREATER THAN 3 MICRONS AND 99.5% FROM 3 MICRONS TO 1.5 MICRONS. • OTHER: AVAILABLE WITH VARIOUS NOZZLE CONFIGURATIONS & ORIENTATIONS. • VANE TYPES: 3.5 AND 4.5 INCH DIAMETER WITH VARIOUS GASKETS.

HORIZONTAL FILTER SEPARATOR

• APPLICATION: LIQUID AND/OR SOLID IN A GAS STREAM, SOLID LOADING RELATIVELY LIGHT. • PRESSURE DROP: 1.0-1.5 PSI AT MAXIMUM RATED CAPACITY. • EFFICIENCY: SOLIDS: 100% REMOVAL OF ALL PARTICLES GREATER THAN 3 MICRONS IN DIAMETER. 99% REMOVAL OF ALL PARTICLES 0.5 TO 3 MICRONS IN DIAMETER.

LIQUIDS: 100% REMOVAL OF ALL LIQUID DROPLETS GREATER THAN 10 MICRONS IN DIAMETER. 99.5% REMOVAL OF ALL DROPLETS 0.5 TO 10 MICRONS IN DIAMETER. • OTHER: HORIZONTAL OR VERTICAL CONFIGURATIONS.

FILTER SEPARATOR EXAMPLE

• DIAMETER: 54” OD

• RATING: ANSI 900#

• ASME U STAMP

• ELEMENTS:

JONELL JFG-336-CE

FILTER SEPARATOR EXAMPLE

• DIAMETER: 54” OD

• RATING: ANSI 900#

• ASME U STAMP

• ELEMENTS:

JONELL JFG-336-CE

ABSOLUTE SEPARATOR

• APPLICATION: REMOVAL OF TRACE AMOUNTS OF LIQUID FROM A GAS STREAM LIMITED TO LIGHT LIQUID LOADING; TRACE SOLIDS ALSO CAN BE HANDLED. • PRESSURE: 0.5-1.0 PSI AT MAXIMUM RATED CAPACITY. • EFFICIENCY: 100% REMOVAL OF ALL DROPLETS GREATER THAN 3 MICRONS AND 99.989% REMOVAL OF ALL DROPLETS LESS THAN 3 MICRONS IN DIAMETER. • INLET SECTION: VANE OR CYCLONE PRIMARY SEPARATORS AVAILABLE. • FILTER SECTION: SPECIAL 5.5 INCHES O.D. HIGH DENSITY FILTERS CARTRIDGE.

PRODUCT APPLICATION