PVDF-UHP - HURNER

PVDF-UHP

Febbraio 2015

February 2015

© Hürner Italia srl - Via Buonarroti 10/A 20060 Mombretto di Mediglia (MI) Italia Tel: +39.029062621 - Fax: +39.0290626220 - Email: [email protected]

Sede Legale: 20131 Milano - Via Pacini,37 P.IVA/C.F. 01616770150

r =0,95 - 1,0 DE Codice base: vedi tabelle. Per completare il codice articolo aggiungere DE del raccordo. Prezzi in Euro/cad. r =0,95 - 1,0 DE Code: see in the tables. To complete the fittings code add the DE size. Price in Euro/pc.

curve 90 gradibends 90 degrees

PREZZO - PRICE PN 10 - ISO S-16 - SDR 33

DE [mm]

PVDF-UHP 3020_72

r [mm]

z [mm]

s [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

125 393,93 125 135±2,0 3,9 0,65 4 140 444,95 140 148±4,0 4,3 0,90 4 160 516,02 157 181±4,0 4,9 1,50 2 180 611,37 175 200±4,0 5,5 2,00 2 200 721,75 196 217±4,0 6,2 2,76 1 225 855,57 225 243±4,0 6,9 3,70 1 250 1216,04 250 287±4,0 7,7 5,70 1 280 1595,64 280 288±4,0 8,6 7,20 1 315 2056,85 300 338±4,0 9,7 10,10 1


DE [mm]

PVDF-UHP 3020_82

r [mm]

z [mm]

s [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

125 535,24 125 135±2,0 6,0 0,98 6 140 605,50 140 148±4,0 6,7 1,33 4 160 700,01 157 181±4,0 7,7 2,01 2 180 832,16 175 200±4,0 8,6 2,95 2 200 981,87 196 217±4,0 9,6 3,96 1 225 1164,19 225 250±4,0 10,8 5,42 1 250 1654,01 250 287±4,0 11,9 7,91 1 280 2380,66 280 288±4,0 13,4 10,25 1 315 7959,91 300 338±4,0 15,0 14,42 1

1

r=1,0 DE Codice base: vedi tabelle Per completare il codice articolo aggiungere DE del raccordo. Prezzi in Euro/cad. r=1,0 DE Code: see in the table. To complete the fittings code add the DE size. Price in Euro/pc.

curve 90 gradi, con terminali prolungati bends 90 degrees, elongated


DE [mm]

PVDF-UHP 3022_72

r [mm]

z [mm]

s [mm]

l [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

90 210,05 90 123±1,5 2,8 34 0,38 12 110 283,01 110 142±1,5 3,4 34 0,66 7 140 548,19 140 216±1,0 4,3 73 1,42 6 160 813,43 160 236±1,0 4,9 73 1,86 6 225 2117,73 225 301±1,0 6,9 73 5,08 6


DE [mm]

PVDF-UHP 3022_82

r [mm]

z [mm]

s [mm]

l [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

20 8,56 20 51±1,5 1,9 33 0,02 100 25 11,58 25 56±1,5 1,9 33 0,03 50 32 22,69 32 63±1,5 2,4 33 0,06 40 40 35,66 40 72±1,5 2,4 36 0,08 30 50 53,96 50 84±1,5 3,0 36 0,14 20 63 90,85 63 97±1,5 3,0 34 0,20 12 75 154,69 75 100±1,5 3,6 28 0,29 10 90 257,74 90 123±1,5 4,3 34 0,55 12 110 386,52 110 142±1,5 5,3 34 0,92 6 140 823,29 140 216±1,0 6,7 73 2,02 6 160 1228,93 160 236±1,0 7,7 73 2,84 6 225 3194,05 225 301±1,0 10,8 73 7,25 6

2

r =0,95 - 1,0 DE Codice base: vedi tabelle. Per completare il codice articolo aggiungere DE del raccordo. I terminali sono prolungati con elementi di tubo estruso, saldati al raccordo stampato. Prezzi in Euro/cad. r =0,95 - 1,0 DE Code: see in the tables. To complete the fittings code add the DE size. The ends are elengated with extruded pipes, welded with the injected moulded bend. Price in Euro/pc.

curve 45 gradi, con terminali prolungati bends 45 degree, elongated


DE [mm]

PVDF-UHP 3017_72

r [mm]

z [mm]

s [mm]

l [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

125 669,73 125 152 3,9 100 0,89 2 180 1019,36 175 172 5,5 100 2,15 2 200 1175,21 196 181 6,2 100 2,82 2 225 1364,17 225 193 6,9 100 3,65 2 250 1700,43 250 204 7,7 100 4,94 2 280 2130,17 280 216 8,6 100 6,30 2 315 2722,73 300 224 9,7 100 8,56 2


DE [mm]

PVDF-UHP 3017_82

r [mm]

z [mm]

s [mm]

l [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

125 900,56 125 152 6,0 100 1,32 2 180 1395,27 175 172 8,6 100 3,18 2 200 1670,57 196 181 9,6 100 4,05 2 225 1939,97 225 193 10,8 100 5,36 2 250 2398,52 250 204 11,9 100 7,25 2 280 3310,01 280 216 13,4 100 9,37 2 315 10057,48 300 224 15,0 100 10,05 2

3

Codice base: vedi tabelle. Per completare il codice articolo aggiungere DE del raccordo. Prezzi in Euro/cad. Code: see in the tables. To complete the fittings code add the DE size. Price in Euro/pc.

gomiti 45 gradi, con terminali prolungati elbows 45 degrees, elongated


DE [mm]

PVDF-UHP 3031_72

z [mm]

s [mm]

l [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

90 172,28 59±4,0 2,8 36±5,0 0,19 10 110 223,30 68±4,0 3,4 45±5,0 0,32 15 140 514,34 85±3,0 4,3 57±3,0 1,47 6 160 579,58 103±5,0 4,9 65±5,0 0,99 4


DE [mm]

PVDF-UHP 3031_82

z [mm]

s [mm]

l [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

20 10,47 43±2,0 1,9 39±2,0 0,02 50 25 11,47 45±2,0 1,9 40±2,0 0,03 50 32 16,97 52±2,0 2,4 46±2,0 0,05 50 40 26,86 58±3,0 2,4 50±3,0 0,08 25 50 35,28 66±3,0 3,0 56±3,0 0,13 16 63 56,03 75±3,0 3,0 62±3,0 0,17 12 75 115,51 50±3,0 3,6 32±3,0 0,14 12 90 200,74 59±4,0 4,3 36±5,0 0,26 20 110 289,38 68±4,0 5,3 45±5,0 0,48 15 140 602,16 85±3,0 6,7 57±3,0 1,92 6 160 675,78 103±5,0 7,7 65±5,0 2,53 4

4


T 90 gradi normalitees 90 degrees equal


DE [mm]

PVDF-UHP 3040_72

z [mm]

s [mm]

l [mm]

l1 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

90 224,50 92±2,0 2,8 185±2,0 33±1,0 0,47 50 110 250,89 110±2,0 3,4 221±2,0 33±1,0 0,94 6 125 416,50 139±2,0 3,9 279±2,0 52±1,0 0,90 4 140 459,14 154±4,0 4,3 308±4,0 60±2,0 1,70 2 160 556,15 140±4,0 4,9 279±4,0 45±2,0 1,90 2 180 644,84 200±4,0 5,5 400±4,0 80±2,0 2,50 1 200 840,89 223±4,0 6,2 446±4,0 89±2,0 5,70 1 225 1077,39 246±4,0 6,9 496±4,0 99±2,0 7,00 1 250 1341,37 250±4,0 7,7 500±4,0 80±2,0 8,60 1 280 1773,03 248±4,0 8,6 495±4,0 70±2,0 10,10 1 315 2475,32 247±4,0 9,7 496±4,0 57±2,0 13,60 1


DE [mm]

PVDF-UHP 3040_82

z [mm]

s [mm]

l [mm]

l1 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

20 11,80 35±2,0 1,9 70±2,0 15±1,0 0,03 60 25 14,87 40±2,0 1,9 80±2,0 15±1,0 0,04 50 32 21,48 45±2,0 2,4 89±2,0 17±1,0 0,07 40 40 34,29 50±2,0 2,4 100±2,0 16±1,0 0,09 30 50 37,74 60±2,0 3,0 120±2,0 23±1,0 0,16 15 63 80,46 75±2,0 3,0 149±2,0 28±1,0 0,27 10 75 153,88 87±2,0 3,6 174±2,0 27±1,0 0,42 8 90 264,29 92±2,0 4,3 185±2,0 33±1,0 0,63 5 110 327,86 110±2,0 5,3 221±2,0 33±1,0 1,20 6 125 566,19 139±2,0 6,0 279±2,0 52±1,0 1,22 4 140 629,76 154±4,0 6,7 308±4,0 60±2,0 2,30 2 160 722,60 140±4,0 7,7 279±4,0 45±2,0 2,60 2 180 878,17 200±4,0 8,6 400±4,0 80±2,0 4,60 1 200 1144,05 223±4,0 9,6 446±4,0 89±2,0 7,30 1 225 1465,42 246±4,0 10,8 496±4,0 99±2,0 9,30 1 250 2481,53 250±4,0 11,9 500±4,0 80±2,0 11,40 1 280 3158,29 248±4,0 13,4 495±4,0 70±2,0 14,00 1 315 9640,83 247±4,0 15,0 496±4,0 57±2,0 17,10 1

5


T 90 gradi normali, con terminali prolungati tees 90 degrees equal, elongated


DE [mm]

PVDF-UHP 3041_82

z [mm]

s [mm]

l [mm]

l1 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

20 27,76 55±2,0 1,9 109±2,0 36±2,0 0,05 40 25 32,12 59±2,0 1,9 117±2,0 40±2,0 0,07 30 32 38,49 72±2,0 2,4 143±2,0 45±2,0 0,11 20

6

Codice base: vedi tabelle. Per completare il codice articolo aggiungere le prime due cifre di DE e de. Prezzi in Euro/cad. Code: see in the tables. To complete the fitting code add the first two numerals of DE and de size. Price in Euro/pc.

T 90 gradi ridotti, con terminali prolungati tees 90 degrees reduced, elongated


DE/de [mm/mm]

PVDF-UHP 3047_72

z [mm]

s1 [mm]

s2 [mm]

l [mm]

l1 [mm]

l2 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

110/90 393,61 150±4,0 3,4 2,8 313±6,0 87±3,0 75±2,0 3,00 3 160/90 731,79 183±4,0 4,9 2,8 348±6,0 96±3,0 70±3,0 2,00 2 160/110 765,27 183±4,0 4,9 3,4 349±6,0 97±3,0 80±3,0 2,70 2


DE/de [mm/mm]

PVDF-UHP 3047_82

z [mm]

s1 [mm]

s2 [mm]

l [mm]

l1 [mm]

l2 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

63/32 154,72 74±2,0 3,0 2,4 149±4,0 28±2,0 27±2,0 0,22 15 90/63 270,96 129±4,0 4,3 3,0 263±6,0 75±3,0 65±2,0 0,78 8 110/63 409,82 150±4,0 5,3 3,0 312±6,0 85±3,0 65±2,0 1,30 4 110/90 409,82 150±4,0 5,3 4,3 313±6,0 87±3,0 75±2,0 1,40 4 160/63 761,08 175±4,0 7,7 3,0 345±6,0 100±3,0 65±2,0 2,70 2 160/90 790,35 183±4,0 7,7 4,3 348±6,0 97±3,0 70±3,0 2,90 2 160/110 819,60 185±4,0 7,7 5,3 345±6,0 96±3,0 81±3,0 3,00 2

PREZZO - PRICE PN 10/16 - ISO S-16/10 - SDR 33/21

DE/de [mm/mm]

PVDF-UHP 3047_782

z [mm]

s1 [mm]

s2 [mm]

l [mm]

l1 [mm]

l2 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

90/63 270,96 129±4,0 2,8 3,0 263±6,0 75±3,0 65±2,0 0,58 8 110/63 409,82 150±4,0 3,4 3,0 315±6,0 85±3,0 65±2,0 0,92 4 160/63 761,08 175±4,0 4,9 3,0 345±6,0 100±3,0 65±2,0 1,90 2 160/90 790,35 183±4,0 4,9 4,3 348±6,0 97±3,0 70±3,0 2,50 2 160/110 819,60 185±4,0 4,9 5,3 347±6,0 96±3,0 81±3,0 2,10 2

7

Codice base: vedi tabella. Per completare il codice articolo aggiungere le prime due cifre di DE e de. Prezzi in Euro/cad. Code: see in the table. To complete the fitting code add the first two numerals of DE and de size. Price in Euro/pc.

T 90 gradi ridotti, formatitees 90 degrees reduced, machined


DE/de [mm/mm]

PVDF-UHP 3046_72

z [mm]

s1 [mm]

s2 [mm]

l [mm]

l1 [mm]

d3 [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

225/140 8092,95 226,0±3,0 6,9 4,3 270±2,0 40,0±1,0 295±2,0 9,10 10 1 225/160 8092,95 227,0±3,0 6,9 4,3 275±2,0 40,0±1,0 300±2,0 9,70 10 1


DE/de [mm/mm]

PVDF-UHP 3046_782

z [mm]

s1 [mm]

s2 [mm]

l [mm]

l1 [mm]

d3 [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

90/20 1200,98 150,5±4,5 2,8 1,9 149±1,5 37,0±1,5 105±0,75 0,48 10 1 90/25 1200,98 150,5±4,5 2,8 1,9 149±1,5 37,0±1,5 105±0,75 0,36 10 1 90/32 1200,98 149,5±4,5 2,8 2,4 149±1,5 37,0±1,5 105±0,75 0,37 10 1 110/20 1463,22 160,5±4,5 3,4 1,9 150±1,5 38,0±1,5 124±0,75 0,46 10 1 110/25 1463,22 160,5±4,5 3,4 1,9 150±1,5 38,0±1,5 124±0,75 0,53 10 1 110/32 1463,22 159,5±4,5 3,4 2,4 150±1,5 38,0±1,5 124±0,75 0,68 10 8 140/20 1866,10 176,5±4,5 4,3 1,9 158±1,5 31,5±1,5 157±0,75 1,10 10 2 140/25 1866,10 176,5±4,5 4,3 1,9 158±1,5 31,5±1,5 157±0,75 0,85 10 2 140/32 1866,10 176,5±4,5 4,3 2,4 158±1,5 31,5±1,5 157±0,75 0,86 10 2 160/20 2739,86 187,5±4,5 4,9 1,9 158±1,5 31,5±1,5 178±0,75 1,45 10 4 160/25 2739,86 187,5±4,5 4,9 1,9 158±1,5 31,5±1,5 178±0,75 0,93 10 1 160/32 2739,86 187,5±4,5 4,9 2,4 158±1,5 31,5±1,5 178±0,75 0,94 16 1

8

Codice base: vedi tabella. Per completare il codice articolo aggiungere le prime due cifre di DE e de. Prezzi in Euro/cad. Code: see in the table. To complete the fitting code add the first two numerals of DE and de size. Price in Euro/pc.

T 90 gradi ridotti, formatitees 90 degrees reduced, machined


DE/de [mm/mm]

PVDF-UHP 3046_82

z [mm]

s1 [mm]

s2 [mm]

l [mm]

l1 [mm]

d3 [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

63/20 739,67 137,0±4,5 3,0 1,9 120±1,5 23,5±1,5 84±0,75 0,37 16 20 63/25 739,67 137,0±4,5 3,0 1,9 120±1,5 23,5±1,5 84±0,75 0,40 16 20 75/20 936,51 145,5±4,5 3,6 1,9 120±1,5 25,0±1,5 105±0,75 0,59 16 18 75/25 957,63 145,5±4,5 3,6 1,9 120±1,5 25,0±1,5 105±0,75 0,59 16 18 75/32 957,63 149,5±4,5 3,6 2,4 140±3,0 35,0±1,5 85±0,75 0,38 16 20 90/20 1200,98 150,5±4,5 4,3 1,9 149±1,5 37,0±1,5 105±0,75 0,62 16 12 90/25 1200,98 150,5±4,5 4,3 1,9 149±1,5 37,0±1,5 105±0,75 0,63 16 12 90/32 1200,98 149,5±4,5 4,3 2,4 149±1,5 37,0±1,5 105±0,75 0,50 16 12 110/20 1463,22 160,5±4,5 5,3 1,9 150±1,5 38,0±1,5 124±0,75 0,57 16 8 110/25 1463,22 160,5±4,5 5,3 1,9 150±1,5 38,0±1,5 124±0,75 0,65 16 8 110/32 1463,22 159,5±4,5 5,3 2,4 150±1,5 38,0±1,5 124±0,75 0,80 16 8 140/20 1866,10 176,5±4,5 6,7 1,9 158±1,5 31,5±1,5 157±0,75 1,40 16 6 140/25 1866,10 176,5±4,5 6,7 1,9 158±1,5 31,5±1,5 157±0,75 1,12 16 1 140/32 1866,10 176,5±4,5 6,7 2,4 158±1,5 31,5±1,5 157±0,75 1,44 16 6 140/40 1866,10 182,0±3,0 6,7 2,4 210±2,0 50,0±1,0 150±1,0 1,61 16 2 140/50 1866,10 182,0±3,0 6,7 3,0 210±2,0 50,0±1,0 150±1,0 1,49 16 1 140/63 1866,10 182,0±3,0 6,7 3,0 210±2,0 50,0±1,0 150±1,0 1,61 16 4 160/20 2739,86 187,5±4,5 7,7 1,9 158±1,5 31,5±1,5 178±0,75 1,73 16 3 160/25 2739,86 187,5±4,5 7,7 1,9 158±1,5 31,5±1,5 178±0,75 1,22 16 1 160/32 2739,86 187,5±4,5 7,7 2,4 158±1,5 26,0±1,5 178±0,75 1,77 16 4 160/40 2739,86 192,0±3,0 7,7 2,4 210±2,0 50,0±1,0 170±1,0 1,78 16 3 160/50 2739,86 192,0±3,0 7,7 3,0 210±2,0 50,0±1,0 170±1,0 1,83 16 3 160/63 2739,86 192,0±3,0 7,7 3,0 210±2,0 50,0±1,0 170±1,0 1,87 16 3 160/75 2739,86 190,0±3,0 7,7 3,6 210±2,0 42,0±1,0 200±2,0 3,45 16 2 225/20 8092,95 220,0±3,0 10,8 1,9 130±2,0 40,0±1,0 250±2,0 2,31 16 3 225/110 8092,95 220,0±3,0 10,8 5,3 220±2,0 40,0±1,0 270±2,0 6,47 16 1 225/140 8092,95 226,0±3,0 10,8 6,7 270±2,0 40,0±1,0 295±2,0 12,20 16 1 225/160 8092,95 227,0±3,0 10,8 7,7 275±2,0 40,0±1,0 300±2,0 12,80 16 1

9


riduzioni concentriche, formatereducers concentric, machined


DE/de [mm/mm]

PVDF-UHP 3050_72

s1 [mm]

s2 [mm]

l [mm]

l1 [mm]

l2 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

125/90 562,52 3,9 2,8 100±2,0 25±1,0 20±1,0 0,31 10 125/110 562,52 3,9 3,4 100±2,0 25±1,0 20±1,0 0,37 15 140/90 658,66 4,3 2,8 100±2,0 25±1,0 20±1,0 0,32 15 140/125 658,66 4,3 3,9 100±2,0 25±1,0 20±1,0 0,39 10 200/140 1311,87 6,2 4,3 120±2,0 26±2,0 20±1,0 1,10 5 200/160 1311,87 6,2 4,9 120±2,0 26±2,0 20±1,0 1,04 5 280/160 2148,63 8,6 4,9 120±2,0 27±2,0 20±1,0 2,00 3 280/225 2148,63 8,6 6,9 120±2,0 27±2,0 20±1,0 1,80 2


DE/de [mm/mm]

PVDF-UHP 3050_82

s1 [mm]

s2 [mm]

l [mm]

l1 [mm]

l2 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

63/20 254,51 3,0 1,9 80±2,0 25±1,0 20±1,0 0,09 30 75/20 267,82 3,6 1,9 80±2,0 25±1,0 20±1,0 0,08 25 75/25 267,82 3,6 1,9 80±2,0 25±1,0 20±1,0 0,12 25 75/32 267,82 3,6 2,4 80±2,0 25±1,0 20±1,0 0,11 25 75/40 267,82 3,6 2,4 80±2,0 25±1,0 20±1,0 0,13 20 90/20 299,18 4,3 1,9 80±2,0 25±1,0 20±1,0 0,14 20 90/25 299,18 4,3 1,9 80±2,0 25±1,0 20±1,0 0,16 20 90/32 299,18 4,3 2,4 80±2,0 25±1,0 20±1,0 0,16 20 90/40 299,18 4,3 2,4 80±2,0 25±1,0 20±1,0 0,11 15 110/20 466,71 5,3 1,9 100±2,0 25±1,0 20±1,0 0,29 10 110/25 466,71 5,3 1,9 100±2,0 25±1,0 20±1,0 0,28 10 110/32 466,71 5,3 2,4 100±2,0 25±1,0 20±1,0 0,33 12 110/40 466,71 5,3 2,4 100±2,0 25±1,0 20±1,0 0,30 10 110/50 466,71 5,3 3,0 100±2,0 25±1,0 20±1,0 0,56 10 110/75 466,71 5,3 3,6 100±2,0 25±1,0 20±1,0 0,33 10 125/63 562,52 6,0 3,0 100±2,0 25±1,0 20±1,0 0,41 10 125/90 562,52 6,0 4,3 100±2,0 25±1,0 20±1,0 0,38 6 125/110 562,52 6,0 5,3 100±2,0 25±1,0 20±1,0 0,47 18 140/90 658,66 6,7 4,3 100±2,0 25±1,0 20±1,0 0,50 15 140/125 658,66 6,7 6,0 100±2,0 25±1,0 20±1,0 0,50 5 200/140 1311,87 9,6 6,7 120±2,0 26±2,0 20±1,0 1,20 5 200/160 1311,87 9,6 7,7 120±2,0 26±2,0 20±1,0 1,40 4 280/160 2148,63 13,4 7,7 120±2,0 27±2,0 20±1,0 2,60 3 280/225 2148,63 13,4 10,8 120±2,0 27±2,0 20±1,0 2,50 3

10


riduzioni concentriche, con terminali prolungatireducers concentric, elongated


DE/de [mm/mm]

PVDF-UHP 3051_72

s1 [mm]

s2 [mm]

l [mm]

l1 [mm]

l2 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

110/90 91,61 3,4 2,8 90±6,0 30±3,0 35±3,0 0,47 10 140/110 149,69 4,3 3,4 110±6,0 42±3,0 40±3,0 0,40 15 160/110 204,51 4,9 3,4 230±6,0 95±3,0 89±3,0 1,40 5 160/140 270,96 4,9 4,3 226±6,0 95±3,0 96±3,0 1,00 4 225/160 662,33 6,9 4,9 160±6,0 32±3,0 35±3,0 1,20 3 250/160 744,19 7,7 4,9 179±6,0 36±3,0 36±3,0 1,60 2 250/225 760,87 7,7 6,9 180±6,0 43±3,0 28±3,0 1,90 2 315/160 948,72 9,7 4,9 180±6,0 43±3,0 37±3,0 5,00 1 315/250 967,08 9,7 7,7 180±6,0 43±3,0 37±3,0 5,00 1


DE/de [mm/mm]

PVDF-UHP 3051_82

s1 [mm]

s2 [mm]

l [mm]

l1 [mm]

l2 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

25/20 10,40 1,9 1,9 50±4,0 20±2,0 20±2,0 0,02 50 32/20 13,86 2,4 1,9 50±4,0 19±2,0 19±2,0 0,03 40 32/25 13,86 2,4 1,9 50±4,0 20±2,0 20±2,0 0,02 50 40/20 17,38 2,4 1,9 55±4,0 20±2,0 20±2,0 0,06 30 40/25 17,38 2,4 1,9 55±4,0 20±2,0 20±2,0 0,02 30 40/32 18,58 2,4 2,4 55±4,0 20±2,0 20±2,0 0,07 30 50/20 19,48 3,0 1,9 60±4,0 23±2,0 20±2,0 0,04 30 50/25 20,44 3,0 1,9 60±4,0 24±2,0 20±2,0 0,04 40 50/32 20,44 3,0 2,4 60±4,0 25±2,0 20±2,0 0,08 50 50/40 20,44 3,0 2,4 60±4,0 25±2,0 22±2,0 0,05 40 63/25 29,59 3,0 1,9 75±4,0 25±2,0 20±2,0 0,05 30 63/32 29,59 3,0 2,4 65±4,0 25±2,0 18±2,0 0,06 25 63/40 29,59 3,0 2,4 65±4,0 26±2,0 22±2,0 0,06 30 63/50 29,59 3,0 3,0 65±4,0 25±2,0 24±2,0 0,07 30 75/50 57,74 3,6 3,0 148±6,0 63±2,0 57±3,0 0,21 15 75/63 57,74 3,6 3,0 149±6,0 65±2,0 60±3,0 0,22 15 90/50 74,61 4,3 3,0 90±6,0 30±2,0 25±3,0 0,12 10 90/63 74,61 4,3 3,0 160±6,0 70±2,0 59±3,0 0,28 10 90/75 75,41 4,3 3,6 162±6,0 75±2,0 62±3,0 0,30 10 110/63 90,20 5,3 3,0 103±6,0 30±2,0 33±3,0 0,24 10 110/90 91,61 5,3 4,3 90±6,0 30±2,0 35±3,0 0,56 10 140/63 149,69 6,7 3,0 133±6,0 38±2,0 27±3,0 0,46 10 140/110 149,69 6,7 5,3 110±6,0 42±2,0 40±3,0 0,51 14 160/110 204,51 7,7 5,3 230±6,0 95±2,0 89±3,0 1,30 5 160/140 270,96 7,7 6,7 226±6,0 95±2,0 96±3,0 1,60 4 225/160 662,33 10,8 7,7 160±6,0 32±2,0 35±3,0 3,20 3 250/160 710,96 11,9 7,7 179±6,0 36±3,0 36±3,0 2,30 3 250/225 760,87 11,9 10,8 180±6,0 43±2,0 28±3,0 2,10 2

11


riduzioni concentriche, con terminali prolungatireducers concentric, elongated


DE/de [mm/mm]

PVDF-UHP 3051_782

s1 [mm]

s2 [mm]

l [mm]

l1 [mm]

l2 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

90/63 73,52 2,8 3,0 160±6,0 70±3,0 59±3,0 0,23 10 110/63 88,04 3,4 3,0 103±6,0 30±3,0 33±3,0 0,63 16 160/110 204,55 4,9 5,3 230±6,0 95±3,0 89±3,0 1,54 5

12


riduzioni concentriche con diametri intermedireducers concentric with intermediate diameters


DE/de [mm/mm]

PVDF-UHP 3055_72

s1 [mm]

s2 [mm]

l [mm]

l1 [mm]

l2 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

160/110 179,18 4,9 3,4 85±2,0 14 13 0,33 12 225/160 267,65 6,9 4,9 87±2,0 20 14 0,81 5 315/225 501,95 9,7 6,9 137±4,0 26 19 2,00 2


DE/de [mm/mm]

PVDF-UHP 3055_82

s1 [mm]

s2 [mm]

l [mm]

l1 [mm]

l2 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

110/63 84,46 5,3 3,0 65±2,0 11 7 0,16 15

13


cartellestub ends


DE [mm]

PVDF-UHP 3060_72

z [mm]

s [mm]

d3 [mm]

d4 [mm]

h1 [mm]

h4 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

90 80,30 80+5,0 2,8 138-2,0 138-2,0 11,0+1,0 42+2,0 0,36 8 110 112,90 80+5,0 3,4 158-2,0 158-2,0 18,0+1,0 42+2,0 0,48 14 125 169,77 80+5,0 3,9 158-2,0 158-2,0 14,0+1,0 33+2,0 0,46 14 140 267,65 80+5,0 4,3 188-2,0 188-2,0 15,0+1,0 41+2,0 0,67 8 160 348,75 80+5,0 4,9 212-2,0 212-2,0 16,0+1,0 37+2,0 0,95 6 180 441,59 80+5,0 5,5 212-2,0 212-2,0 18,0+1,0 32+2,0 0,87 6 200 587,96 100+6,0 6,2 268-2,0 268-2,0 18,0+1,0 42+2,0 1,90 4 225 627,24 100+6,0 6,9 268-2,0 268-2,0 18,0+1,0 52+2,0 1,50 4 250 753,55 100+6,0 7,7 320-2,0 320-2,0 20,0+1,0 40+4,0 2,90 2 280 932,53 100+8,0 8,6 320-2,0 320-2,0 20,0+1,0 50+4,0 2,40 2 315 1120,68 100+8,0 8,6 320-2,0 320-2,0 20,0+1,0 50+4,0 3,30 2


DE [mm]

PVDF-UHP 3060_82

z [mm]

s [mm]

d3 [mm]

d4 [mm]

h1 [mm]

h4 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

20 7,31 49+5,0 1,9 27-4,0 45-2,0 6,0+1,0 31+2,0 0,03 50 25 8,48 50+5,0 1,9 33-4,0 58-2,0 6,5+1,0 30+2,0 0,05 40 32 10,30 50+5,0 2,4 40-4,0 68-2,0 7,0+1,0 26+2,0 0,07 40 40 16,73 50+5,0 2,4 50-4,0 78-2,0 8,0+1,0 24+2,0 0,09 30 50 19,77 50+5,0 3,0 61-4,0 88-2,0 9,0+1,0 22+2,0 0,12 30 63 28,79 50+5,0 3,0 75-4,0 102-2,0 10,0+1,0 19+2,0 0,18 60 75 62,81 50+5,0 3,6 89-6,0 122-2,0 10,0+1,0 20+2,0 0,26 15 90 85,32 80+5,0 4,3 105-6,0 138-2,0 11,0+1,0 42+2,0 0,41 8 110 118,77 80+5,0 5,3 125-6,0 158-2,0 12,0+1,0 40+2,0 0,54 14 125 250,55 80+5,0 6,0 132-6,0 158-2,0 14,0+1,0 42+2,0 0,61 24 140 363,81 80+5,0 6,7 155-6,0 188-2,0 15,0+1,0 42+2,0 0,88 8 160 470,04 81+5,0 7,7 175-6,0 212-2,0 16,0+1,0 36+2,0 1,10 6 180 602,16 80+5,0 8,6 183-8,0 212-2,0 18,0+1,0 30+2,0 1,10 6 200 802,89 100+6,0 9,6 232-8,0 268-2,0 20,0+1,0 43+3,0 2,80 4 225 853,08 100+6,0 10,8 235-8,0 268-2,0 20,0+1,0 46+3,0 2,00 4 250 1131,11 100+6,0 11,9 285-8,0 320-2,0 22,0+1,0 35+3,0 3,50 2 280 1488,92 100+8,0 13,4 291-8,0 320-2,0 25,0+1,0 48+3,0 3,00 2 315 1804,45 102+8,0 15,0 335-8,0 370-2,0 25,0+1,0 41+3,0 3,30 2

PREZZO - PRICE ANSI 150 - PN 10

DE [mm]

PVDF-UHP 3060_725

z [mm]

s [mm]

d3 [mm]

d4 [mm]

h1 [mm]

h4 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

90 115,53 80+5,0 2,8 105-6,0 132,4-

2,0 11,0+1,0 42+2,0 0,30 8

14


cartellestub ends

PREZZO - PRICE ANSI 150 - PN 16

DE [mm]

PVDF-UHP 3060_825

z [mm]

s [mm]

d3 [mm]

d4 [mm]

h1 [mm]

h4 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

20 9,04 50+5,0 1,9 27-4,0 44,5-2,0 6,0+1,0 31+2,0 0,03 50 25 10,49 50+5,0 1,9 33-4,0 54,1-2,0 6,5+1,0 30+2,0 0,05 50 32 11,29 50+5,0 2,4 40-4,0 63,5-2,0 7,0+1,0 26+2,0 0,07 35 40 18,21 50+5,0 2,4 50-4,0 71,5-2,0 8,0+1,0 24+2,0 0,09 30 50 21,51 50+5,0 3,0 61-4,0 82,6-2,0 9,0+1,0 22+2,0 0,11 30

63 31,32 50+5,0 3,0 76-4,0 100,4-

2,0 10,0+1,0 19+2,0 0,17 20

75 90,80 50+5,0 3,6 89-6,0 117,0-

2,0 10,0+1,0 20+2,0 0,25 15

90 122,75 80+5,0 4,3 105-6,0 132,4-

2,0 11,0+1,0 42+2,0 0,40 8

15


cartelle per valvole a farfallastub ends for butterfly valve


DE [mm]

PVDF-UHP 30601_82

z [mm]

s [mm]

d3 [mm]

d4 [mm]

h1 [mm]

h4 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

90 119,87 80+5,0 4,3 105-6,0 138-2,0 11,0+1,0 42+2,0 0,39 8 110 167,04 80+5,0 5,3 125-6,0 158-2,0 12,0+1,0 40+2,0 0,55 14 140 452,56 80+5,0 6,7 155-6,0 188-2,0 15,0+1,0 42+2,0 0,82 8 160 584,79 81+5,0 7,7 175-6,0 212-2,0 16,0+1,0 36+2,0 1,11 6 180 746,95 80+5,0 8,6 183-8,0 212-2,0 18,0+1,0 30+2,0 1,10 6 200 994,45 100+6,0 9,6 232-8,0 268-2,0 20,0+1,0 43+3,0 2,05 4 225 1061,14 100+5,0 10,8 235-8,0 268-2,0 20,0+1,0 46+3,0 1,92 4 250 1413,88 100+6,0 11,9 285-8,0 320-2,0 22,0+1,0 35+3,0 3,46 2 280 1861,13 100+6,0 13,4 291-8,0 320-2,0 25,0+1,0 48+3,0 3,13 2 315 2255,53 102+6,0 15,0 335-8,0 370-2,0 25,0+1,0 41+3,0 3,30 2

16


calotte, con terminali prolungatiend caps, elongated


DE [mm]

PVDF-UHP 3071_72

z [mm]

s [mm]

l [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

90 51,85 110±3,0 2,8 84±3,0 0,19 15 110 67,74 125±3,0 3,4 99±3,0 0,29 6


DE [mm]

PVDF-UHP 3071_82

z [mm]

s [mm]

l [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

20 11,05 45±2,0 1,9 41±2,0 0,01 60 25 12,64 49±2,0 1,9 41±2,0 0,01 50 32 14,22 56±2,0 2,4 45±2,0 0,03 100 40 26,35 64±3,0 2,4 50±3,0 0,04 40 50 31,95 73±3,0 3,0 60±3,0 0,07 40 63 51,34 83±3,0 3,0 66±3,0 0,11 25 75 62,81 93±3,0 3,6 75±3,0 0,22 15 90 67,74 110±3,0 4,3 84±3,0 0,30 15 110 97,85 125±3,0 5,3 99±3,0 0,47 6

17

Senza attacco filettato 1) Esecuzione formata 2) Esecuzione stampata Codice base: vedi tabelle. Per completare il codice articolo aggiungere DE del raccordo. Prezzi in Euro/cad. Execution without thread connection 1) Execution moulded 2) Execution machined Code: see in the tables. To complete the fittings code add the DE size. Price in Euro/pc.

raccordi per strumenti, stampati o formati instrumentation fitting, moulded or machined

PREZZO - PRICE PN 10 - ISO S-16 - SDR 33 1)

DE [mm]

PVDF-UHP 3094_72

s [mm]

l [mm]

l1 [mm]

d1 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

90 274,26 2,8 140±2,0 60±1,0 105±1,0 0,55 7 110 345,11 3,4 150±2,0 60±1,0 124±1,0 0,69 10 125 504,67 3,9 160±2,0 80±1,0 143±1,0 1,02 1 140 607,53 4,3 158±2,0 78±1,0 157±1,0 1,22 5 160 732,74 4,9 158±2,0 78±1,0 178±1,0 1,46 4


DE [mm]

PVDF-UHP 3094_72

s [mm]

l [mm]

l1 [mm]

d1 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

200 1484,06 6,2 120±2,0 50±1,0 224±1,0 2,78 1 225 1777,28 6,9 120±2,0 50±1,0 246±1,0 1,93 1 250 3189,29 7,7 120±2,0 50±1,0 285±1,0 2,81 3 280 3297,20 8,6 120±2,0 50±1,0 298±1,0 2,70 3


DE [mm]

PVDF-UHP 3094_82

s [mm]

l [mm]

l1 [mm]

d1 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

63 211,64 3,0 120±2,0 52±1,0 84±1,0 0,41 12 90 285,44 4,3 149±2,0 60±1,0 105±1,0 0,62 7 110 357,89 5,3 150±2,0 60±1,0 124±1,0 0,83 10 125 545,56 6,0 160±2,0 80±1,0 143±1,0 1,24 1 140 628,23 6,7 158±2,0 78±1,0 157±1,0 1,48 5 160 763,17 7,7 158±2,0 78±1,0 178±1,0 1,82 4


DE [mm]

PVDF-UHP 3094_82

s [mm]

l [mm]

l1 [mm]

d1 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

20 104,30 1,9 120±2,0 50±1,0 50±1,0 0,21 15 25 117,04 1,9 120±2,0 50±1,0 55±1,0 0,25 30 32 144,10 2,4 120±2,0 52±1,0 60±1,0 0,27 30 40 177,72 2,4 120±2,0 50±1,0 75±1,0 0,44 18 50 223,27 3,0 120±2,0 50±1,0 80±1,0 0,49 15 75 786,54 3,6 120±2,0 50±1,0 105±1,0 0,66 8 200 1554,80 9,6 120±2,0 50±1,0 224±1,0 3,48 2 225 1862,05 10,8 120±2,0 50±1,0 246±1,0 2,57 3 250 3341,39 11,9 120±2,0 50±1,0 285±1,0 3,38 3 280 3454,48 13,4 120±2,0 50±1,0 298±1,0 3,42 3

18


punti fissirestrained fitting


DE [mm]

PVDF-UHP 3097_72

s [mm]

l [mm]

l1 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

90 157,98 2,8 150±2,0 40,5±1,0 0,33 8 110 234,06 3,4 150±2,0 40,5±1,0 0,47 10 125 352,13 3,9 160±2,0 60,5±1,0 0,62 5 140 415,67 4,3 160±2,0 60,5±1,0 0,83 5 160 536,00 4,9 160±2,0 60,5±1,0 1,40 4


DE [mm]

PVDF-UHP 3097_82

s [mm]

l [mm]

l1 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

25 102,38 1,9 120±2,0 33,0±1,0 0,04 4 32 33,22 2,4 120±2,0 33,0±1,0 0,06 30 40 131,74 2,4 120±2,0 33,0±1,0 0,07 4 50 159,88 3,0 120±2,0 33,0±1,0 0,14 4 63 70,01 3,0 120±2,0 31,0±1,0 0,19 15 75 285,12 3,6 150±2,0 40,5±1,0 0,28 4 90 172,27 4,3 150±2,0 40,5±1,0 0,44 8 110 255,94 5,3 150±2,0 40,5±1,0 0,66 13 125 377,64 6,0 160±2,0 60,5±1,0 0,84 5 140 448,92 6,7 160±2,0 60,5±1,0 1,10 5 160 577,84 7,7 160±2,0 60,5±1,0 1,40 4

19

Codice base: vedi tabelle. Per completare il codice articolo aggiungere le due cifre del DE e del DN del raccordo. Prezzi in Euro/cad. Code: see in the tables. To complete the fitting code add the first two numerals of DE and DN size. Price in Euro/pc.

nippli con filetto maschioadaptors male thread

PREZZO - PRICE PN 10/16 - ISO S-10 - SDR 21

DE [mm]

PVDF-UHP Filetto/Thread

GAS/R 3100_82

s [mm]

l [mm]

l1 [mm]

l2 [mm]

SW [mm]

DN [inch]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20 13,26 1,9 46±4,0 20±2,0 18±2,0 22,0±3,0 1/2" 0,02 10 60 25 15,42 1,9 51±4,0 23±2,0 20±2,0 27,0±3,0 3/4" 0,02 10 50 32 23,61 2,4 61±4,0 29±2,0 23±2,0 36,0±3,0 1"

0,05 10 30 40 28,68 2,4 66±4,0 29±2,0 27±2,0 46,0±3,0 11/4" 0,07 10 40 50 43,65 3,0 74±4,0 33±2,0 29±2,0 55,0±3,0 11/2" 0,10 10 30 63 55,70 3,0 80±4,0 35±2,0 31±2,0 65,0±3,0 2"

0,13 10 20


DE [mm]


NPT 3101_82

s [mm]

l [mm]

l1 [mm]

l2 [mm]

SW [mm]

DN [inch]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20 13,26 1,9 46±4,0 20±2,0 18±2,0 22,0±3,0 1/2" 0,02 10 60 25 15,42 1,9 51±4,0 23±2,0 20±2,0 27,0±3,0 3/4" 0,02 10 50 32 23,61 2,4 61±4,0 29±2,0 23±2,0 36,0±3,0 1"

0,05 10 60 40 28,68 2,4 66±4,0 29±2,0 27±2,0 46,0±3,0 11/4" 0,07 10 40 50 43,65 3,0 74±4,0 33±2,0 29±2,0 55,0±3,0 11/2" 0,10 10 30 63 55,70 3,0 80±4,0 35±2,0 31±2,0 65,0±3,0 2"

0,13 10 20

20

Codice base: vedi tabelle. Per completare il codire articolo aggiungere le due cifre del DE e del DN del raccordo. Prezzi in Euro/cad. Code: see in the tables. To complete the fitting code add the first two numerals of DE and DN size. Price in Euro/pc.

nippli con filetto femminaadaptors female thread


DE [mm]


GAS/R 3104_82

s [mm]

l [mm]

l1 [mm]

l2 [mm]

SW [mm]

DN [inch]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20 15,34 1,9 46±4,0 20±2,0 16±2,0 32 1/2" 0,03 10 40 25 17,88 1,9 51±4,0 23±2,0 18±2,0 41 3/4" 0,05 10 30 32 26,35 2,4 58±4,0 29±2,0 20±2,0 46 1"

0,07 10 40 40 31,15 2,4 62±4,0 30±2,0 24±2,0 55 11/4" 0,09 10 35 50 48,95 3,0 68±4,0 33±2,0 26±2,0 70 11/2" 0,21 10 20 63 59,28 3,0 75±4,0 35±2,0 30±2,0 85 2"

0,33 10 20


DE [mm]


NPT 3105_82

s [mm]

l [mm]

l1 [mm]

l2 [mm]

SW [mm]

DN [inch]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20 15,34 1,9 46±4,0 20±2,0 16±2,0 32 1/2" 0,03 10 40 25 17,88 1,9 51±4,0 23±2,0 18±2,0 41 3/4" 0,05 10 30 32 26,35 2,4 58±4,0 29±2,0 20±2,0 46 1"

0,08 10 40 40 31,15 2,4 62±4,0 30±2,0 24±2,0 55 11/4" 0,09 10 35 50 48,95 3,0 68±4,0 33±2,0 26±2,0 70 11/2" 0,21 10 20 63 59,28 3,0 75±4,0 35±2,0 30±2,0 85 2"

0,33 10 20

21

Codice base: vedi tabelle. O-Ring in FPM approvato FDA. Per completare il codice articolo aggiungere il DE del bocchettone. Prezzi in Euro/cad. Code: see in the tables. To complete the fittings code add the DE size. Price in Euro/pc.

bocchettoniunions


DE [mm]

PVDF-UHP FPM

3121_82

s [mm]

l [mm]

l1 [mm]

l2 [mm]

dm [mm]

b [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20 40,74 1,9 107 24 35,5 47,0 24 0,09 10 40 25 51,61 1,9 112 24 36,5 57,0 26 0,12 10 35 32 63,46 2,4 119 25 39,3 64,0 30 0,18 10 25 40 88,52 2,4 125 25 37,5 76,5 31 0,27 10 15 50 123,49 3,0 130 25 40,0 89,0 35 0,36 10 12 63 184,49 3,0 136 25 40,5 109,0 39 0,55 10 8 75 272,38 3,6 132 28 37,0 130,0 40 0,81 10 6 90 379,38 4,3 130 34 55,0 130,0 40 0,76 10 1

22

I manicotti sono saldabili con la macchina saldatrice a lettura ottica HPF400. Codice base: vedi tabella. Per completare il codice articolo aggiungere il DE del manicotto. Prezzi in Euro/cad. Sockets are weldable by electrofusion control box type HPF400. Code:see in the table. To complete the fitting code add the DE size. Price in Euro/cad.

manicotti elettrosaldabilielectrofusion couplers

PREZZO - PRICE PN 16 - SDR 21

DE [mm]

PVDF-UHP 3492_82

l [mm]

l1 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

20 26,79 20,0+0,5 15 0,01 80 25 27,72 20,0+0,5 15 0,02 70 32 30,62 20,0+0,5 15 0,03 80 40 33,37 25,0+0,5 20 0,04 50 50 35,69 30,0+0,5 24 0,04 40 63 45,92 30,0+0,5 24 0,06 30

23

Secondo le normative ISO DIS 10931 Codice base: vedi tabelle. Per completare il codice articolo aggiungere DE del tubo. Prezzi in Euro/mt. acc. to ISO DIS 10931 Code: see the tables. To complete the article code add the DE size. Price in Euro/mt.

tubazionipipes


DE [mm]

PVDF-UHP 3001_72

s [mm]

Lunghezza Length

[mt]

Peso Weight [kg/m]

Conf. Pack.

[Pz/Pc]

90 149,16 2,8 5 1,48 1 110 221,72 3,4 5 2,20 1 125 286,20 3,9 5 2,84 1 140 354,96 4,3 5 3,52 1 160 457,48 4,9 5 4,54 1 180 578,59 5,5 5 5,74 1 200 724,92 6,2 5 7,19 1 225 902,15 6,9 5 8,95 1 250 1117,95 7,7 5 11,09 1 280 1397,01 8,6 5 13,86 1 315 1769,10 9,7 5 17,55 1


DE [mm]

PVDF-UHP 3001_82

s [mm]

Lunghezza Length

[mt]

Peso Weight [kg/m]

Conf. Pack.

[Pz/Pc]

20 21,17 1,9 5 0,21 1 25 27,14 1,9 5 0,27 1 32 44,26 2,4 5 0,44 1 40 55,43 2,4 5 0,55 1 50 85,88 3,0 5 0,85 1 63 109,92 3,0 5 1,09 1 75 156,35 3,6 5 1,55 1 90 223,84 4,3 5 2,22 1 110 334,75 5,3 5 3,32 1 125 427,30 6,0 5 4,24 1 140 544,95 6,7 5 5,31 1 160 701,59 7,7 5 6,96 1 180 880,98 8,6 5 8,74 1 200 1082,51 9,6 5 10,74 1 225 1377,96 10,8 5 13,67 1 250 1686,33 11,9 5 16,73 1 280 2153,00 13,4 5 21,11 1 315 2672,15 15,0 5 26,50 1

24

Le flange cieche non sono sollecitabili a pressione. Supportarle con adeguata flangia cieca in PP/ACC. Codice base: vedi tabelle. Per completare il codice articolo aggiungere DE della flangia cieca. Prezzi in Euro/cad. Blind flanges can't support pressure stress. Combine them with a blind flange in PP/STEEL. Code: see in the tables. To complete the article code add the DE size. Price in Euro/pc.

flange cieche, formateblind flanges, machined

PREZZO - PRICE PN 10

DE/DN [mm/mm]

PVDF-UHP 3621_72

d2 [mm]

D [mm]

b [mm]

k [mm]

Viti Screws numero number

Viti Screws

diametro diameter

Viti Screws

[Nm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20/15 159,05 14 95±1,0 17±3,0 65±1,0 4 M12 15 0,23 0 25 25/20 168,60 14 105±1,0 17±3,0 75±1,0 4 M12 15 0,28 0 25 32/25 179,01 14 115±1,0 17±3,0 85±1,0 4 M12 15 0,33 0 18 40/32 232,10 18 140±1,0 17±3,0 100±1,0 4 M16 25 0,50 0 15 50/40 251,21 18 150±1,0 17±3,0 110±1,0 4 M16 35 0,53 0 10 63/50 279,62 18 165±1,0 17±3,0 125±1,0 4 M16 35 0,73 0 8 75/65 314,41 18 185±1,0 17±3,0 145±1,0 4 M16 40 0,84 0 10 90/80 391,08 18 200±1,0 17±3,0 160±1,0 8 M16 40 1,02 0 9

110/100 443,09 18 220±1,0 17±3,0 180±1,0 8 M16 40 1,27 0 8 125/100 443,09 18 220±1,0 17±3,0 180±1,0 8 M16 45 1,27 0 8 140/125 547,14 18 250±1,0 17±3,0 210±1,0 8 M16 50 1,73 0 4 160/150 651,18 22 285±1,0 17±3,0 240±1,0 8 M20 60 1,93 0 4 180/150 651,18 22 285±1,0 17±3,0 240±1,0 8 M20 60 1,93 0 1 200/200 936,35 22 340±1,0 17±3,0 295±1,0 8 M20 70 3,20 0 4 225/200 936,35 22 340±1,0 17±3,0 295±1,0 8 M20 70 3,20 0 4

PREZZO - PRICE ANSI 150

DE/DN [mm/mm]

PVDF-UHP 3621_152

d2 [mm]

D [mm]

b [mm]

k [mm]

Viti Screws numero number

Viti Screws

diametro diameter

Viti Screws

[Nm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20/15 166,19 16,0 95±1,0 12±1,0 60,4±1,0 4 M12 15 0,15 0 25 25/20 176,19 16,0 102±1,0 12±1,0 69,8±1,0 4 M12 15 0,27 0 25 32/25 187,00 16,0 114±1,0 16±1,0 79,2±1,0 4 M12 15 0,32 0 18 40/32 242,55 16,0 130±1,0 16±1,0 88,8±1,0 4 M16 25 0,37 0 15 50/40 262,53 16,0 133±1,0 18±1,0 98,6±1,0 4 M16 35 0,49 0 10 63/50 292,22 20,0 162±1,0 18±1,0 120,6±1,0 4 M16 35 0,65 0 8 75/65 328,57 20,0 181±1,0 18±1,0 139,7±1,0 4 M16 40 0,83 0 10 90/80 408,67 20,0 194±1,0 18±1,0 152,4±1,0 4 M16 40 0,94 0 9

110/100 523,63 20,0 229±1,0 18±1,0 190,5±1,0 8 M16 40 1,27 0 7 125/100 523,63 20,0 229±1,0 18±1,0 190,5±1,0 8 M16 45 1,27 0 7 160/150 865,62 22,0 283±1,0 24±1,0 241,3±1,0 8 M20 60 2,78 0 5 180/150 865,62 22,0 283±1,0 24±1,0 241,3±1,0 8 M20 60 2,78 0 5 200/200 1192,21 22,0 345±1,0 24±1,0 298,2±1,0 8 M20 70 3,95 0 3 225/200 1192,21 22,0 345±1,0 24±1,0 298,2±1,0 8 M20 70 3,95 0 3

25

Codice base: vedi tabelle. Per completare il codice articolo aggiungere DE della guarnizione Prezzi in Euro/cad Code: see in the tables. To complete the article code add the DE size. Price in Euro/pc

guarnizioni piane profilatetrimmed flat gaskets


DE [mm]

PVDF-UHP ePTFE

56463_72

s [mm]

d4 [mm]

d6 [mm]

DN [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

90 79,00 3,0 138,0 83,1 80 0,02 100 110 102,86 3,0 158,0 101,3 100 0,02 100 125 79,29 3,0 158,0 115,5 100 0,02 100 140 130,43 3,0 188,0 128,8 125 0,03 100 160 169,97 3,0 212,0 146,9 150 0,04 100 180 146,85 3,0 212,0 165,6 150 0,03 100 200 273,41 3,0 268,0 184,3 200 0,06 100 225 245,84 3,0 268,0 210,7 200 0,04 100 250 369,49 3,0 320,0 233,0 250 0,07 100 280 328,05 3,0 320,0 260,5 250 0,05 100 315 404,50 3,0 370,0 293,3 300 0,08 100


DE [mm]

PVDF-UHP ePTFE

56463_82

s [mm]

d4 [mm]

d6 [mm]

DN [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

20 14,44 3,0 45,0 15,3 15 0,01 100 25 18,82 3,0 58,0 20,3 20 0,01 100 32 23,86 3,0 68,0 26,1 25 0,01 100 40 28,81 3,0 78,0 33,6 32 0,01 100 50 35,81 3,0 88,0 42,8 40 0,01 100 63 51,43 3,0 102,0 55,1 50 0,01 100 75 68,43 3,0 122,0 66,4 65 0,02 100 90 79,00 3,0 138,0 80,0 80 0,02 100 110 102,86 3,0 158,0 98,0 100 0,02 100 125 79,29 3,0 158,0 109,9 100 0,02 100 140 130,43 3,0 188,0 124,8 125 0,03 100 160 169,97 3,0 212,0 143,0 150 0,04 100 180 146,85 3,0 212,0 159,9 150 0,03 100 200 273,41 3,0 268,0 178,4 200 0,06 100 225 245,84 3,0 268,0 202,3 200 0,05 100 250 369,49 3,0 320,0 225,5 250 0,08 100 280 328,05 3,0 320,0 251,2 250 0,06 100 315 404,50 3,0 370,0 293,3 300 0,08 100

PREZZO - PRICE ANSI 150 - SDR 33

DE [mm]

PVDF-UHP ePTFE

56463_725

s [mm]

d4 [mm]

d6 [mm]

DN [inch]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

90 79,00 3,0 132,4 83,1 3" 0,02 100

26

Codice base: vedi tabelle. Per completare il codice articolo aggiungere DE della guarnizione Prezzi in Euro/cad Code: see in the tables. To complete the article code add the DE size. Price in Euro/pc

guarnizioni piane profilatetrimmed flat gaskets

PREZZO - PRICE ANSI 150 - SDR 21

DE [mm]

PVDF-UHP ePTFE

56463_825

s [mm]

d4 [mm]

d6 [mm]

DN [inch]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

20 14,44 3,0 45,0 15,3 1/2" 0,01 100 25 18,82 3,0 54,1 20,3 3/4" 0,01 100 32 23,86 3,0 63,5 26,1 1" 0,01 100 40 28,81 3,0 71,5 33,6 11/4" 0,01 100 50 35,81 3,0 82,6 42,8 11/2" 0,01 100 63 51,43 3,0 100,4 55,1 2" 0,01 100 75 68,43 3,0 117,0 66,4 21/2" 0,01 100 90 79,00 3,0 132,4 80,0 3" 0,02 100

27

AISI 1.4408 ad alta purezza. Codice base: vedi tabelle. Per completare il codice base aggiungere il DE del morsetto. Prezzi in Euro/cad. AISI 1.4408 HP. Code: see in the tables. To complete the article code add the DE size. Prices in Euro/pc.

morsetti a un nodosanitary joint


DE [mm]

PVDF-UHP AISI

9145_82

d [mm]

b [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

20 82,61 50,5 88 0,24 30 25 82,61 50,5 88 0,24 30 32 82,61 50,5 88 0,24 30 40 89,80 64,0 107 0,34 15 50 89,80 64,0 107 0,34 15 63 107,39 77,5 125 0,38 15

28

Codice base: vedi tabella. Per completare il codice articolo aggiungere DE del raccordo. Prezzi in Euro/cad. Code: see in the table. To complete the article code add the DE size. Price in Euro/pc.

cartelle per morsetto rapido, formate stub for sanitary connection, machined


DE [mm]

PVDF-UHP 3147_82

z [mm]

s [mm]

d4 [mm]

h1 [mm]

h4 [mm]

d [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20 83,70 42±1,5 1,9 50,5 2,8 23 18,1 0,05 10 25 25 83,70 42±1,5 1,9 50,5 2,8 23 22,4 0,04 10 30 32 83,70 42±1,5 2,4 50,5 2,8 23 29,7 0,04 10 20 40 130,38 42±1,5 2,4 64,0 2,8 23 38,4 0,06 10 30 50 130,38 42±1,5 3,0 64,0 2,8 23 44,2 0,05 10 25 63 140,79 49±1,5 3,0 77,5 2,8 30 60,3 0,07 10 25

29

Codice base: vedi tabella. Per completare il codice base aggiungere il DE del morsetto. Prezzi in Euro/cad Code: see in the table. To complete the article code add the DE size. Prices in Euro/pc

guarnizioni profilate per morsetto rapido trimmed gaskets for sanitary connection


DE [mm]

PVDF-UHP FPM-HP 5646_72

s [mm]

d1 [mm]

d2 [mm]

Peso Weight

[kg]

Conf. Pack.

[Pz/Pc]

20 27,07 1,8 18,1 50,5 0,01 50 25 29,02 1,8 22,4 50,5 0,01 50 32 32,75 1,8 29,9 50,5 0,01 100 40 38,19 1,8 38,4 64,0 0,02 50 50 42,94 1,8 44,2 64,0 0,02 50 63 48,92 1,8 60,3 77,5 0,02 50

30

Saldatura testa a testa. Codice base: vedi tabella. Per completare il codice base aggiungere le prime due cifre del DE e del DN del raccordo. Prezzi in Euro/cad. Butt fusion welding. Code: see in the table. To complete the article code add DE and DN size. Prices in Euro/pc

raccordi di transizione su PFAtransition fittings to PFA


DE [mm]

PVDF-UHP 3479_82

s1 [mm]

l [mm]

l1 [mm]

DN [inch]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20 124,58 1,9 81 38,1 1/4" 0,03 10 30 20 132,59 1,9 84 38,1 3/8" 0,02 10 30 20 165,33 1,9 86 38,1 1/2" 0,04 10 50 20 164,78 1,9 90 38,1 3/4" 0,06 10 50 25 132,59 1,9 81 38,1 1/4" 0,03 10 30 25 144,69 1,9 85 38,1 3/8" 0,03 10 50 25 156,77 1,9 87 38,1 1/2" 0,05 10 40 25 180,82 1,9 90 38,1 3/4" 0,07 10 30 25 204,99 1,9 98 38,1 1" 0,08 10 15 32 184,89 2,4 87 38,1 1/2" 0,12 10 50 32 204,99 2,4 91 38,1 3/4" 0,13 10 25 32 233,02 2,4 98 38,1 1" 0,14 10 25 40 208,94 2,4 87 38,1 1/2" 0,18 10 50

31

Azionamento manuale. Codice base: vedi tabelle. Per completare il codice articolo aggiungere il DN della valvola. Prezzi in Euro/cad. Hand operated. 1) Terminal wallthickness PN 10. Code valve: see in the tables. To complete the valve code add the DN size. Price in Euro/pc.

valvole a sfera a due vie - terminali lisci 2 way ball valves - butt+IR-fusion ends


DE/DN [mm/mm]

PVDF-UHP FPM

3291_828

s [mm]

l [mm]

l1 [mm]

h [mm]

d [mm]

b [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20/15 271,76 1,9 124±1,5 14,3±1,0 71,5±1,0 51,8±1,0 40,0±1,0 0,23 16 25 25/20 350,70 1,9 144±1,5 15,7±1,0 77,0±1,0 61,5±1,0 51,5±1,0 0,36 16 15 32/25 448,36 2,4 154±1,5 18,1±1,0 80,5±1,0 68,5±1,0 51,5±1,0 0,47 16 15 40/32 592,41 2,4 174±1,5 20,5±1,0 98,5±1,0 83,5±1,0 64,0±1,0 0,78 16 10 50/40 1009,74 3,0 194±1,5 23,5±1,0 106,5±1,0 98,0±1,0 73,0±1,0 1,20 16 5 63/50 1411,19 3,0 224±1,5 27,4±1,0 115,5±1,0 118,0±1,0 85,0±1,0 1,90 16 3 75/65 2003,70 3,6 284±1,5 31,0±1,0 142,0±1,0 151,0±1,0 110,0±1,0 3,80 16 1


DE/DN [mm/mm]

PVDF-UHP FPM

3291_728

s [mm]

l [mm]

l1 [mm]

h [mm]

d [mm]

b [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

90/80 2650,71 4,3 300±1,5 35,5±1,0 160,0±1,0 183,0±1,0 132,0±1,0 6,49 10 1

32

Azionamento manuale. Set accessori: - portagomma - nipplo filettato maschio R/NPT - tappo filettato maschio Codice base: vedi tabella Per completare il codice articolo aggiungere il DN della valvola Prezzi in Euro/cad. Hand operated. Connection set: - nose nozzle - double threaded nipple BSP/NPT - plug male thread Code valve: see in the table To complete the valve code add DN size. Price in Euro/pc.

valvole a sfera a due vie di campionatura con o senza accessori2 way laboratory ball valves with or without accessories


DE/DN [mm/mm]

PVDF-UHP filettato

threaded GAS/R

set escl./excl. 3305_72

l [mm]

l1 [mm]

l2 [mm]

l3 [mm]

G [mm]

b [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

10/6 90,80 58,5 14,5 28,5 13,2 1/4" 28,2 0,05 10 70


DE/DN [mm/mm]

PVDF-UHP filettato

threaded NPT

set escl./excl. 3307_72

l [mm]

l1 [mm]

l2 [mm]

l3 [mm]

G [mm]

b [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

10/6 90,80 58,5 14,5 28,5 13,2 1/4" 28,2 0,05 10 30

33

Azionamento manuale. Codice base: vedi tabelle Per completare il codice articolo aggiungere il DN della valvola Prezzi in Euro/cad Hand operated. Code valve: see in the tables To complete the valve code add the DN size. Price in Euro/pc

valvole a membrana - terminali lisci mobili diaphragm valves - movable butt+IR-fusion ends


DE/DN [mm/mm]

PVDF-UHP EPDM

rivestita/coated PTFE

3298_8582

s [mm]

l [mm]

l1 [mm]

h [mm]

h1 [mm]

d [mm]

f [mm]

k [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20/15 603,23 1,9 133 16,5 100 16,5 86 24,5 M6 0,40 10 1 25/20 669,06 1,9 144 16,5 100 16,5 86 24,5 M6 0,50 10 1 32/25 774,39 2,4 154 20,0 107 20,0 86 24,5 M6 0,65 10 1 40/32 1043,18 2,4 193 25,5 136 25,5 136 44,0 M8 1,60 10 1 50/40 1263,45 3,0 194 32,0 144 32,0 136 44,0 M8 1,70 10 1 63/50 1642,86 3,0 224 38,5 170 38,5 136 44,0 M8 2,40 10 1

34

Azionamento manuale. Codice base: vedi tabelle Per completare il codice articolo aggiungere il DN della valvola Prezzi in Euro/cad Hand operated. Code valve: see in the tables To complete the valve code add the DN size. Price in Euro/pc

valvole a membrana - terminali lisci diaphragm valves - butt+IR-fusion ends


DE/DN [mm/mm]

PVDF-UHP EPDM


3298_828

s [mm]

l [mm]

l1 [mm]

h [mm]

h1 [mm]

d [mm]

f [mm]

k [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20/15 514,30 1,9 133 36 100 16,5 86 24,5 M6 0,40 10 1 25/20 547,32 1,9 144 36 100 16,5 86 24,5 M6 0,50 10 1 32/25 606,10 2,4 154 36 107 20,0 86 24,5 M6 0,65 10 1 40/32 863,74 2,4 193 46 136 25,5 136 44,0 M8 1,60 10 1 50/40 1039,85 3,0 194 46 144 32,0 136 44,0 M8 1,70 10 1 63/50 1394,87 3,0 224 46 170 38,5 136 44,0 M8 2,40 10 1 75/65 3412,00 3,6 284 37 254 25,0 234 230,0 M12 5,80 10 1 90/80 4317,97 4,3 300 37 254 25,0 234 230,0 M12 5,60 10 1

110/100 5213,12 5,3 340 50 320 25,0 234 280,0 M12 10,90 10 1

35

Azionamento manuale. Terminali flangiati fissi o liberi (flangia libera in PP/ACCIAO). Codice base: vedi tabelle Per completare il codice articolo aggiungere il DN metrico della valvola Prezzi in Euro/cad Hand operated. flange connections in PP/STEEL. Code valve: see in the tables To complete the valve code add the DN size. Price in Euro/pc

valvole a membrana - terminali flangiati diaphragm valves - flange connection ends


DE/DN [mm/mm]

PVDF-UHP EPDM


3298_729

l [mm]

h [mm]

h1 [mm]

d [mm]

f [mm]

k [mm]

Peso Weight

[kg]

MOP [bar]

Tipo Type

Conf. Pack.

[Pz/Pc]

20/15 666,44 130 100 16,5 86 24,5 M6 1,04 10 A 1 25/20 798,33 150 100 16,5 86 24,5 M6 1,44 10 A 1 32/25 873,26 160 107 20,0 86 24,5 M6 1,85 10 A 1 75/65 3643,57 300 254 25,0 136 230 M12 7,56 10 A 1

PREZZO - PRICE PN 10 - ANSI 150

DE/DN [mm/mm]

PVDF-UHP EPDM


3298_7592

l [mm]

h [mm]

h1 [mm]

d [mm]

f [mm]

k [mm]

Peso Weight

[kg]

MOP [bar]

Tipo Type

Conf. Pack.

[Pz/Pc]

40/32 1137,81 180 144 25,5 86 43,5 M8 3,16 10 B 4 50/40 1333,26 200 144 31,5 136 43,5 M8 4,20 10 B 4 63/50 1675,73 230 170 38,6 136 43,5 M8 5,20 10 B 4 90/80 4731,78 340 254 25,0 234 230,0 M12 7,90 10 B 1

110/100 6327,19 350 320 25,0 280 280,0 M12 13,90 10 B 4 140/125 8036,15 450 320 25,0 280 280,0 M12 15,30 10 B 1

36

Azionamento manuale. 1) Spessore base PN10 - Spessore derivazione PN16. Codice base: vedi tabelle Per completare il codice articolo aggiungere le prime due cifre di DN e di dn della valvola Prezzi in Euro/cad. Hand operated. 1) Basic wall thicknes PN 10, branch wallthickness PN 16. Code valve: see in the tables To complete the valve code add DN and dn size. Price in Euro/pc.

valvole a membrana a T - terminali lisci diaphragm T valves - butt+IR-fusion ends


DN/dn [mm/mm]

PVDF-UHP EPDM


3294_82

z [mm]

s [mm]

s1 [mm]

l [mm]

l1 [mm]

l2 [mm]

h [mm]

d [mm]

a [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

15/15 833,46 144,0 1,9 1,9 164 36 67,0 118 118 13,0 0,50 10 1 20/15 833,46 144,0 1,9 1,9 164 36 67,5 118 118 14,0 0,56 10 1 20/20 833,46 144,0 1,9 1,9 164 36 70,0 118 118 14,0 0,56 10 1 25/15 998,69 151,5 2,4 1,9 164 36 58,0 128 128 18,0 0,88 10 1 25/20 998,69 154,5 2,4 1,9 164 36 60,0 128 128 18,0 0,88 10 1 25/25 998,69 154,5 2,4 2,4 164 36 61,0 128 128 18,0 0,88 10 1 32/15 1158,76 156,5 2,4 2,4 184 46 58,0 128 128 21,5 0,92 10 1 32/20 1158,76 156,5 2,4 2,4 184 46 60,0 128 128 21,5 0,92 10 1 32/25 1158,76 156,5 2,4 2,4 184 46 61,0 128 128 21,5 0,92 10 1 32/32 1850,47 236,0 2,4 2,4 232 46 93,0 128 189 21,5 2,68 10 1 40/15 1230,65 160,5 3,0 2,4 184 46 59,0 128 128 26,5 0,98 10 1 40/20 1230,65 160,5 3,0 2,4 184 46 60,0 128 128 26,5 0,98 10 1 40/25 1230,65 160,5 3,0 3,0 184 46 61,0 128 128 26,5 0,98 10 1 40/40 1865,75 238,0 3,0 3,0 235 46 93,0 128 200 26,5 2,98 10 1 50/15 1336,92 168,0 3,0 3,0 184 46 58,0 128 128 33,0 1,06 10 1 50/20 1336,92 168,0 3,0 3,0 184 46 60,0 128 128 33,0 1,06 10 1 50/25 1336,92 168,0 3,0 3,0 184 46 61,0 128 128 33,0 1,06 10 1 50/32 2198,03 243,0 3,0 3,0 236 46 88,5 199 199 33,0 3,05 10 1 50/40 2198,03 243,0 3,0 3,0 236 46 93,5 199 199 33,0 3,04 10 1 50/50 2198,03 242,0 3,0 3,0 236 46 100,0 199 199 33,0 3,04 10 1 65/20 2125,13 179,0 3,6 3,6 210 33 60,5 133 133 23,0 1,24 10 1 65/25 2125,13 179,0 3,6 3,6 210 33 64,0 133 133 23,0 1,24 10 1 65/32 2661,60 248,0 3,6 3,6 210 33 88,5 199 199 39,0 3,18 10 1 65/40 2661,60 248,0 3,6 3,6 210 33 93,5 199 199 39,0 3,17 10 1 65/50 2661,60 248,0 3,6 3,6 210 33 100,0 199 199 39,0 3,14 10 1 80/15 2846,52 188,0 4,3 1,9 210 33 58,0 135 135 23,5 1,42 10 1 80/20 2846,52 188,0 4,3 4,3 210 33 60,5 135 135 23,5 1,42 10 1 80/25 2846,52 188,0 4,3 4,3 210 33 64,0 135 135 23,5 1,43 10 1 80/32 3083,26 254,0 4,3 4,3 210 33 88,0 199 199 46,5 3,36 10 1 80/40 3083,26 255,0 4,3 4,3 210 33 93,5 199 199 46,5 3,36 10 1 80/50 3083,26 255,0 4,3 4,3 210 33 100,0 199 199 46,5 3,33 10 1 100/15 2824,17 195,0 5,3 5,3 210 33 55,0 140 140 33,5 1,74 10 1 100/20 2824,17 198,0 5,3 5,3 210 33 57,5 140 140 33,5 1,73 10 1 100/25 2824,17 198,0 5,3 5,3 210 33 61,0 140 140 33,5 1,80 10 1 100/32 3397,22 198,0 5,3 5,3 210 33 61,0 140 140 33,5 3,69 10 1 100/40 3397,22 267,0 5,3 5,3 210 33 93,5 199 199 56,5 3,54 10 1 100/50 4015,67 267,0 5,3 5,3 210 33 100,0 199 199 56,5 3,33 10 1

37

Azionamento manuale. 1) Spessore base PN10 - Spessore derivazione PN16. Codice base: vedi tabelle Per completare il codice articolo aggiungere le prime due cifre di DN e di dn della valvola Prezzi in Euro/cad. Hand operated. 1) Basic wall thicknes PN 10, branch wallthickness PN 16. Code valve: see in the tables To complete the valve code add DN and dn size. Price in Euro/pc.

valvole a membrana a T - terminali lisci diaphragm T valves - butt+IR-fusion ends

PREZZO - PRICE PN 10/16 - ISO S-16/10 - SDR 33/21 1)

DN/dn [mm/mm]

PVDF-UHP EPDM


3294_782

z [mm]

s [mm]

s1 [mm]

l [mm]

l1 [mm]

l2 [mm]

h [mm]

d [mm]

a [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

80/15 2298,63 188,0 2,8 1,9 210 33 60,5 135 135 23,5 1,30 10 1 80/20 2298,63 188,0 2,8 1,9 210 33 60,5 135 135 23,5 1,30 10 1 80/25 2298,63 188,0 2,8 2,4 210 33 64,0 135 135 23,5 1,30 10 1 80/32 3000,07 254,0 2,8 2,4 210 33 88,0 199 199 46,5 3,56 10 1 80/40 3000,07 255,0 2,8 3,8 210 33 93,5 199 199 46,5 3,41 10 1 80/50 3000,07 255,0 2,8 3,8 210 33 100,0 199 199 46,5 3,40 10 1 100/15 2747,26 195,0 3,4 1,9 210 33 55,0 140 140 33,5 1,62 10 1 100/20 2747,26 198,0 3,4 1,9 210 33 57,5 140 140 33,5 1,33 10 1 100/25 2747,26 198,0 3,4 2,4 210 33 61,0 140 140 33,5 1,34 10 1 100/32 3305,03 198,0 3,4 2,4 210 33 61,0 140 140 33,5 3,64 10 1 100/40 3305,03 264,0 3,4 3,0 210 33 93,5 199 199 56,5 3,27 10 1 100/50 3305,03 264,0 3,4 3,0 210 33 100,0 199 199 56,5 3,29 10 1

38

Montaggio tra flange. SM - senza molla di ritorno CM - con molla di ritorno Dp1 - Δp apertura verticale Dp2 - Δp apertura orizzontale In caso di non completa apertura del disco installare un cono d'apertura; Codice: 33321_ Materiale della molla: AISI 1.4401 Hastelloy a richiesta. Codice base: vedi tabelle. Per completare codice articolo aggiungere DN delle valvole. Prezzi in Euro/cad. Wafer type valve. SM - without return spring CM - with return spring Dp1 - Δp vertical opening Dp2 - Δp horizontal opening If the disk do not completely open install a drip ring; Code 33321_ Spring material: AISI 1.4401 Hastelloy on request Code valve: see in the tables. To complete the valve code add the DN size. Price in Euro/pc.

valvole di ritegno a clapetwafer swing type check valves


DE/DN [mm/mm]

PVDF-UHP FPM SM

3333_72

dkl [mm]

di [mm]

b [mm]

Peso Weight

[kg]

MOP [bar]

Dp1 [mbar]

Dp2 [mbar]

Conf. Pack.

[Pz/Pc]

40/32 686,48 85 18 15 0,22 8 10,0 1,0 9 50/40 700,83 95 22 16 0,25 8 10,0 1,0 8 63/50 756,95 109 32 20 0,36 8 14,0 1,5 7

110/100 1449,23 164 70 22 0,77 8 10,0 1,0 5 125/100 1449,23 164 70 22 0,77 8 10,0 1,0 5 140/125 1982,03 195 92 22 0,97 8 9,6 1,0 5 160/150 2755,19 220 112 26 1,40 8 12,5 1,0 5 180/150 2755,19 220 112 26 1,40 8 12,5 1,0 5


DE/DN [mm/mm]

PVDF-UHP FPM CM

3335_72

dkl [mm]

di [mm]

b [mm]

Peso Weight

[kg]

MOP [bar]

Dp1 [mbar]

Dp2 [mbar]

Conf. Pack.

[Pz/Pc]

40/32 952,85 85 18 15 0,16 8 20,0 20,0 9 50/40 966,83 95 22 16 0,20 8 20,0 20,0 3 63/50 1033,01 109 32 20 0,35 8 20,0 20,0 7

110/100 1788,79 164 70 22 0,75 8 20,0 20,0 6 125/100 1788,79 164 70 22 0,75 8 20,0 20,0 6 140/125 2428,42 195 92 22 0,92 8 20,0 20,0 5 160/150 3203,58 220 112 26 1,42 8 20,0 20,0 5 180/150 3203,58 220 112 26 1,42 8 20,0 20,0 5

39

Guarnizione in FPM. Esecuzione con molla di ritorno e indicatore della posizione delle clappe. Codice base: vedi tabelle. Per completare codice articolo aggiungere DN delle valvole. Prezzi in Euro/cad. Seal in FPM. Execution spring acted with optical indicator of position of the swing check disc. Code valve: see in the tables. To complete the valve code add the DN size. Price in Euro/pc.

valvole di ritegno a clapet con distanziale wafer swing type check valves with spacer

PREZZO - PRICE PN 10 - ANSI 150

DE/DN [mm/mm]

PVDF-UHP FPM

33351_725

d2 [mm]

dkl [mm]

b [mm]

k PN10/ANSI [mm/mm]

α [gradi]

[degrees]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

75/65 1630,31 19 115 63 145/139,7 90 1,35 10 1 90/80 1842,62 19 128 71 160/152,4 45 1,56 10 1

110/100 2208,10 19 155 80 180/190,5 45 2,31 10 1 125/100 2208,10 19 155 80 180/190,5 45 2,31 10 1 160/150 3282,61 23 212 106 240/241,3 45 3,00 10 1 180/150 3282,61 23 212 106 240/241,3 45 3,00 10 1 200/200 6498,73 23 264 140 295/298,4 45 4,50 10 1 225/200 6498,73 23 264 140 295/298,4 45 4,50 10 1 250/250 10907,55 27 325 140 350/361,9 30 5,70 8 1 280/250 10907,55 27 325 140 350/361,9 30 5,70 8 1

40

Molla rivestita in PTFE Codice base: vedi tabelle. Per completare il codice articolo aggiungere il DN della valvola. Pressione d'apertura: 0,06 bar Prezzi in Euro/cad. Spring coated out of PTFE Code valve: see in the tables. To complete the valve code add the DN size. Opening pressure: 0,06 bar Price in Euro/pc.

valvole di ritegno - terminali liscicheck valves - butt+IR-fusion ends


DE/DN [mm/mm]

PVDF-UHP FPM

3337_828

s [mm]

l [mm]

l1 [mm]

d [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20/15 418,17 1,9 123,5±1,5 14,0±1,0 52,0±1,0 0,20 16 18 25/20 526,96 1,9 142,0±1,5 15,5±1,0 61,5±1,0 0,31 16 10 32/25 619,51 2,4 151,0±1,5 18,0±1,0 69,0±1,0 0,39 16 7 40/32 906,40 2,4 171,0±1,5 20,5±1,0 83,0±1,0 0,64 16 12 50/40 1166,40 3,0 190,5±1,5 23,5±1,0 99,0±1,0 1,00 16 6 63/50 1566,58 3,0 220,0±1,5 27,5±1,0 115,5±1,0 1,48 16 3 75/65 2272,03 3,6 279,0±1,5 31,5±1,0 149,0±1,0 2,97 16 1


DE/DN [mm/mm]

PVDF-UHP FPM

3337_728

s [mm]

l [mm]

l1 [mm]

d [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

90/80 2987,93 2,8 295,0±1,5 36,5±1,0 185,5±1,0 5,67 10 1

41

Membrana: EPDM/PTFE SENA: attuatore a semplice effetto normalmente aperto. SENC: attuatore a semplice effetto normalmente chiuso. DOEF: attuatore a doppio effetto. Codice base: vedi tabella Per completare codice articolo aggiungere DN della valvola Prezzi in Euro/cad. diaphragm: EPDM/PTFE SENA: single acting (fail safe open). SENC: single acting (fail safe closed). DOEF: double acting. Code valve: see in the table To complete the valve code add DN size. Price in Euro/pc.

valvole a membrana con attuatore pneumatico e indicatore visivo, terminali lisci diaphragm valves with pneumatic actuator and visual position indication, butt+IR-fusion ends


DE/DN [mm/mm]

PVDF-UHP EPDM

rivestita/coated PTFE SENA

3303_828

s [mm]

l [mm]

h [mm]

d [mm]

a [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20/15 792,55 1,9 124 145,4 79,6 16,5 1,41 10 1 25/20 853,72 1,9 144 175,5 100,5 16,5 1,60 10 1 32/25 926,56 2,4 154 175,5 100,5 20,0 2,23 10 1 40/32 1311,15 2,4 174 275,5 157,0 25,5 5,10 10 1 50/40 1472,87 3,0 194 275,5 157,0 32,0 5,50 10 1 63/50 1664,99 3,0 224 275,5 157,0 38,5 7,90 10 1


DE/DN [mm/mm]

PVDF-UHP EPDM

rivestita/coated PTFE SENC

33031_828

s [mm]

l [mm]

h [mm]

d [mm]

a [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20/15 792,55 1,9 124 145,4 79,6 16,5 1,41 10 1 25/20 853,72 1,9 144 175,5 100,5 16,5 1,60 10 1 32/25 926,56 2,4 154 175,5 100,5 20,0 2,23 10 1 40/32 1311,15 2,4 174 275,5 157,0 25,5 5,10 10 1 50/40 1472,87 3,0 194 275,5 157,0 32,0 5,50 10 1 63/50 1664,99 3,0 224 275,5 157,0 38,5 7,90 10 1


DE/DN [mm/mm]

PVDF-UHP EPDM

rivestita/coated PTFE DOEF

33032_828

s [mm]

l [mm]

h [mm]

d [mm]

a [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20/15 792,55 1,9 124 145,4 79,6 16,5 1,41 10 1 25/20 853,72 1,9 144 175,5 100,5 16,5 1,60 10 1 32/25 926,56 2,4 154 175,5 100,5 20,0 2,23 10 1 40/32 1311,15 2,4 174 275,5 157,0 25,5 5,10 10 1 50/40 1472,87 3,0 194 275,5 157,0 32,0 5,50 10 1 63/50 1664,99 3,0 224 275,5 157,0 38,5 7,90 10 1

42

Equipaggiato con attuatore pneumatico a semplice effetto normalmente aperto (SENA). 1) Spessore base PN10 - Spessore derivazione PN16. Codice base: vedi tabelle Per completare il codice articolo aggiungere le prime due cifre di DN e di dn della valvola Prezzi in Euro/cad. With pneumatic actuatorsingle acting (fail safe open, SENA). 1) Basic wall thicknes PN 10, branch wallthickness PN 16. Code valve: see in the tables To complete the valve code add DN and dn size. Price in Euro/pc.

valvole a membrana a T con attuatore pneumatico normalmente aperto, terminali lisci diaphragm T valves with pneumatic actuator, single acting, fail safe open - butt + IR-fusion ends


DN/dn [mm/mm]

PVDF-UHP EPDM


3293_82

z [mm]

s [mm]

s1 [mm]

l [mm]

l1 [mm]

l2 [mm]

h [mm]

d [mm]

a [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

15/15 1470,31 144,0 1,9 1,9 164 36 67,0 169 101 13,0 2,00 10 1 20/15 1470,31 144,0 1,9 1,9 164 36 67,5 169 101 14,0 1,97 10 1 20/20 1470,31 144,0 1,9 1,9 164 36 70,0 169 101 14,0 1,94 10 1 25/15 1672,12 151,5 2,4 1,9 164 36 58,0 179 101 18,0 2,14 10 1 25/20 1672,12 151,5 2,4 1,9 164 36 60,0 179 101 18,0 2,07 10 1 25/25 1672,12 151,5 2,4 2,4 164 36 61,0 179 101 18,0 2,07 10 1 32/15 1844,10 156,5 2,4 1,9 184 46 58,0 179 101 21,5 2,12 10 1 32/20 1844,10 156,5 2,4 1,9 184 46 60,0 179 101 21,5 2,12 10 1 32/25 1844,10 156,5 2,4 2,4 184 46 61,0 179 101 21,5 2,12 10 1 32/32 2944,93 236,0 2,4 2,4 235 46 93,0 277 153 21,5 7,11 10 1 40/15 1993,23 160,5 3,0 1,9 184 46 59,0 179 101 26,5 2,19 10 1 40/20 1993,23 160,5 3,0 1,9 184 46 60,0 179 101 26,5 2,18 10 1 40/25 1993,23 160,5 3,0 2,4 184 46 61,0 179 101 26,5 2,18 10 1 40/40 3081,42 238,0 3,0 3,0 235 46 58,0 288 153 26,5 6,90 10 1 50/15 2206,05 168,0 3,0 1,9 184 46 58,0 179 101 33,0 2,26 10 1 50/20 2206,05 168,0 3,0 1,9 184 46 60,0 179 101 33,0 2,26 10 1 50/25 2206,05 168,0 3,0 2,4 184 46 61,0 179 101 33,0 2,26 10 1 50/32 2959,57 243,0 3,0 2,4 236 46 88,5 286 153 33,0 7,12 10 1 50/40 2959,57 243,0 3,0 3,0 236 46 93,5 286 153 33,0 7,12 10 1 50/50 2959,57 242,0 3,0 3,0 236 46 100,0 286 153 33,0 7,12 10 1 65/20 2742,06 179,0 3,6 1,9 210 33 60,5 184 101 23,0 2,43 10 1 65/25 2742,06 179,0 3,6 2,4 210 33 64,0 184 101 23,0 2,44 10 1 65/32 3850,01 248,0 3,6 2,4 210 33 88,5 284 153 39,0 7,26 10 1 65/40 3850,01 248,0 3,6 3,0 210 33 93,5 284 153 39,0 7,25 10 1 65/50 3850,01 248,0 3,6 3,0 210 33 100,0 284 153 39,0 7,22 10 1 80/15 3082,16 188,0 4,3 1,9 210 33 60,5 187 101 23,5 2,62 10 1 80/20 3082,16 188,0 4,3 1,9 210 33 60,5 187 101 23,5 2,62 10 1 80/25 3082,16 188,0 4,3 2,4 210 33 64,0 187 101 23,5 2,63 10 1 80/32 4231,69 254,0 4,3 2,4 210 33 88,0 286 153 46,5 7,44 10 1 80/40 4231,69 255,0 4,3 3,0 210 33 93,5 286 153 46,5 7,44 10 1 80/50 4231,69 255,0 4,3 3,0 210 33 100,0 286 153 46,5 7,41 10 1 100/15 3331,81 198,0 5,3 1,9 210 33 57,5 191 101 33,5 3,00 10 1 100/20 3331,81 198,0 5,3 1,9 210 33 57,5 191 101 33,5 1,06 10 1 100/25 3331,81 198,0 5,3 2,4 210 33 61,0 191 101 33,5 2,93 10 1 100/32 4884,60 267,0 5,3 2,4 210 33 93,5 286 153 56,5 7,77 10 1 100/40 4884,60 267,0 5,3 3,0 210 33 93,5 286 153 56,5 7,77 10 1 100/50 5503,05 267,0 5,3 3,0 210 33 100,0 286 153 56,5 7,62 10 1

43

Equipaggiato con attuatore pneumatico a semplice effetto normalmente aperto (SENA). 1) Spessore base PN10 - Spessore derivazione PN16. Codice base: vedi tabelle Per completare il codice articolo aggiungere le prime due cifre di DN e di dn della valvola Prezzi in Euro/cad. With pneumatic actuatorsingle acting (fail safe open, SENA). 1) Basic wall thicknes PN 10, branch wallthickness PN 16. Code valve: see in the tables To complete the valve code add DN and dn size. Price in Euro/pc.



DN/dn [mm/mm]

PVDF-UHP EPDM


3293_782

z [mm]

s [mm]

s1 [mm]

l [mm]

l1 [mm]

l2 [mm]

h [mm]

d [mm]

a [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

80/15 2834,36 188 2,8 1,9 210 33 60,5 187 187 23,5 2,53 10 1 80/20 2834,36 188 2,8 1,9 210 33 60,5 187 101 23,5 2,52 10 1 80/25 2834,36 188 2,8 2,4 210 33 64,0 187 101 23,5 2,53 10 1 80/32 4014,18 254 2,8 2,4 210 33 88,0 286 153 46,5 7,35 10 1 80/40 4014,18 255 2,8 3,0 210 33 93,5 286 153 46,5 7,35 10 1 80/50 4014,18 255 2,8 3,0 210 33 100,0 286 153 46,5 7,32 10 1 100/15 3100,67 198 3,4 1,9 210 33 57,5 191 101 33,5 2,87 10 1 100/20 3100,67 198 3,4 1,9 210 33 57,5 191 101 33,5 2,82 10 1 100/25 3100,67 198 3,4 2,4 210 33 61,0 191 101 33,5 2,82 10 1 100/32 4714,73 267 3,4 2,4 210 33 93,5 286 153 56,5 7,64 10 1 100/40 4714,73 264 3,4 3,0 210 33 93,5 286 153 56,5 7,64 10 1 100/50 5302,19 264 3,4 3,0 210 33 100,0 286 153 56,5 7,49 10 1

44

Equipaggiato con attuatore pneumatico a semplice effetto normalmente chiuso (SENC). 1) Spessore base PN10 - Spessore derivazione PN16. Codice base: vedi tabelle Per completare il codice articolo aggiungere la prima cifra del DN e due cifre del dn della valvola Prezzi in Euro/cad With pneumatic actuator single acting (fail safe closed, SENC). 1) Basic wall thicknes PN 10, branch wallthickness PN 16. Code valve: see in the tables To complete the valve code add DN and dn size. Price in Euro/pc

valvole a membrana a T con attuatore pneumatico normalmente chiuso, terminali lisci diaphragm T valves with pneumatic actuator, single acting, fail safe closed - butt + IR-fusion ends


DN/dn [mm/mm]

PVDF-UHP EPDM


32931_82

z [mm]

s [mm]

s1 [mm]

l [mm]

l1 [mm]

l2 [mm]

h [mm]

d [mm]

a [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

15/15 1470,31 144,0 1,9 1,9 164 36 67,0 169 101 13,0 2,00 10 1 20/15 1470,31 144,0 1,9 1,9 164 36 67,5 169 101 14,0 1,97 10 1 20/20 1470,31 144,0 1,9 1,9 164 36 70,0 169 101 14,0 1,94 10 1 25/15 1672,12 151,5 2,4 1,9 164 36 58,0 179 101 18,0 2,14 10 2 25/20 1672,12 151,5 2,4 1,9 164 36 60,0 179 101 18,0 2,07 10 1 25/25 1672,12 151,5 2,4 2,4 164 36 61,0 179 101 18,0 2,07 10 1 32/15 1844,10 156,5 2,4 1,9 184 46 58,0 179 101 21,5 2,12 10 1 32/20 1844,10 156,5 2,4 1,9 184 46 60,0 179 101 21,5 2,22 10 1 32/25 1844,10 156,5 2,4 2,4 184 46 61,0 179 101 21,5 2,22 10 1 32/32 2944,93 236,0 2,4 2,4 235 46 93,0 277 153 21,5 7,11 10 1 40/15 1993,23 160,5 3,0 1,9 184 46 59,0 179 101 26,5 2,19 10 1 40/20 1993,23 160,5 3,0 1,9 184 46 60,0 179 101 26,5 2,18 10 1 40/25 1993,23 160,5 3,0 2,4 184 46 61,0 179 101 26,5 2,18 10 1 40/40 3081,42 238,0 3,0 3,0 235 46 58,0 288 153 26,5 6,90 10 1 50/15 2206,05 168,0 3,0 1,9 184 46 58,0 179 101 33,0 2,26 10 1 50/20 2206,05 168,0 3,0 1,9 184 46 60,0 179 101 33,0 2,26 10 1 50/25 2206,05 168,0 3,0 2,4 184 46 61,0 179 101 33,0 2,26 10 1 50/32 2959,56 243,0 3,0 2,4 236 46 88,5 286 153 33,0 7,12 10 1 50/40 2959,56 243,0 3,0 3,0 236 46 93,5 286 153 33,0 7,12 10 1 50/50 2959,56 242,0 3,0 3,0 236 46 100,0 286 153 33,0 7,12 10 1 65/20 2742,07 179,0 3,6 1,9 210 33 60,5 184 101 23,0 2,43 10 1 65/25 2742,07 179,0 3,6 2,4 210 33 64,0 184 101 23,0 2,44 10 1 65/32 3849,99 248,0 3,6 2,4 210 33 88,5 284 153 39,0 7,26 10 1 65/40 3849,99 248,0 3,6 3,0 210 33 93,5 284 153 39,0 7,25 10 1 65/50 3849,99 248,0 3,6 3,0 210 33 100,0 284 153 39,0 7,22 10 1 80/15 3082,15 188,0 4,3 1,9 210 33 60,5 187 101 23,5 2,62 10 1 80/20 3082,15 188,0 4,3 1,9 210 33 60,5 187 101 23,5 2,62 10 1 80/25 3082,15 188,0 4,3 2,4 210 33 64,0 187 101 23,5 2,63 10 1 80/32 4231,69 254,0 4,3 2,4 210 33 88,0 286 153 46,5 7,44 10 1 80/40 4231,69 255,0 4,3 3,0 210 33 93,5 286 153 46,5 7,44 10 1 80/50 4231,69 255,0 4,3 3,0 210 33 100,0 286 153 46,5 7,41 10 1 100/15 3331,81 198,0 5,3 1,9 210 33 57,5 191 101 33,5 3,00 10 1 100/20 3331,81 198,0 5,3 1,9 210 33 57,5 191 101 33,5 1,06 10 1 100/25 3331,81 198,0 5,3 2,4 210 33 61,0 191 101 33,5 2,93 10 1 100/32 4884,60 267,0 5,3 2,4 210 33 93,5 286 153 56,5 7,77 10 1 100/40 4884,60 267,0 5,3 3,0 210 33 93,5 286 153 56,5 7,77 10 1 100/50 5503,06 267,0 5,3 3,0 210 33 100,0 286 153 56,5 7,62 10 1

45

Equipaggiato con attuatore pneumatico a semplice effetto normalmente chiuso (SENC). 1) Spessore base PN10 - Spessore derivazione PN16. Codice base: vedi tabelle Per completare il codice articolo aggiungere la prima cifra del DN e due cifre del dn della valvola Prezzi in Euro/cad With pneumatic actuator single acting (fail safe closed, SENC). 1) Basic wall thicknes PN 10, branch wallthickness PN 16. Code valve: see in the tables To complete the valve code add DN and dn size. Price in Euro/pc



DN/dn [mm/mm]

PVDF-UHP EPDM


32931_782

z [mm]

s [mm]

s1 [mm]

l [mm]

l1 [mm]

l2 [mm]

h [mm]

d [mm]

a [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

80/15 3061,12 188 2,8 1,9 210 33 60,5 187 187 23,5 2,53 10 1 80/20 3061,12 188 2,8 1,9 210 33 60,5 187 101 23,5 2,52 10 1 80/25 3061,12 188 2,8 2,4 210 33 64,0 187 101 23,5 2,53 10 1 80/32 4335,30 254 2,8 2,4 210 33 88,0 286 153 46,5 7,35 10 1 80/40 4335,30 255 2,8 3,0 210 33 93,5 286 153 46,5 7,35 10 1 80/50 4335,30 255 2,8 3,0 210 33 100,0 286 153 46,5 7,32 10 1 100/15 3348,71 198 3,4 1,9 210 33 57,5 191 101 33,5 2,87 10 1 100/20 3348,71 198 3,4 1,9 210 33 57,5 191 101 33,5 2,82 10 1 100/25 4919,71 198 3,4 2,4 210 33 61,0 191 101 33,5 2,82 10 1 100/32 5091,92 267 3,4 2,4 210 33 93,5 286 153 56,5 7,64 10 1 100/40 5091,92 264 3,4 3,0 210 33 93,5 286 153 56,5 7,64 10 1 100/50 5726,38 264 3,4 3,0 210 33 100,0 286 153 56,5 7,49 10 1

46

Equipaggiato con attuatore pneumatico a doppio effetto (DOEF). Codice base: vedi tabelle Per completare il codice articolo aggiungere la prima cifra del DN e due cifre del dn della valvola Prezzi in Euro/cad With pneumatic actuator and double acting (DOEF). Code valve: see in the tables To complete the valve code add DN and dn size. Price in Euro/pc

valvole a membrana a T con attuatore pneumatico a doppio effetto, terminali lisci diaphragm T valves with pneumatic actuator and double acting - butt + IR-fusion ends


DN/dn [mm/mm]

PVDF-UHP EPDM


32932_82

z [mm]

s [mm]

s1 [mm]

l [mm]

l1 [mm]

l2 [mm]

h [mm]

d [mm]

a [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

15/15 1470,31 144,0 1,9 1,9 164 36 67,0 169 101 13,0 1,10 10 1 20/15 1470,31 144,0 1,9 1,9 164 36 67,5 169 101 14,0 1,04 10 1 20/20 1470,31 144,0 1,9 1,9 164 36 70,0 169 101 14,0 1,04 10 1 25/15 1672,12 151,5 2,4 1,9 164 36 58,0 179 101 18,0 1,45 10 1 25/20 1672,12 151,5 2,4 1,9 164 36 60,0 179 101 18,0 1,45 10 1 25/25 1672,12 151,5 2,4 2,4 164 36 61,0 179 101 18,0 1,45 10 1 32/15 1844,10 156,5 2,4 1,9 184 46 58,0 179 101 21,5 1,50 10 1 32/20 1844,10 156,5 2,4 1,9 184 46 60,0 179 101 21,5 1,50 10 1 32/25 1844,10 156,5 2,4 2,4 184 46 61,0 179 101 21,5 1,50 10 1 32/32 2944,93 236,0 2,4 2,4 235 46 93,0 277 153 21,5 7,11 10 1 40/15 1993,23 160,5 3,0 1,9 184 46 59,0 179 101 26,5 1,57 10 1 40/20 1993,23 160,5 3,0 1,9 184 46 60,0 179 101 26,5 1,56 10 1 40/25 1993,23 160,5 3,0 2,4 184 46 61,0 179 101 26,5 1,56 10 1 40/40 3081,42 238,0 3,0 3,0 235 46 58,0 288 153 26,5 6,90 10 1 50/15 2206,05 168,0 3,0 1,9 184 46 58,0 179 101 33,0 1,64 10 1 50/20 2206,05 168,0 3,0 1,9 184 46 60,0 179 101 33,0 1,64 10 1 50/25 2206,05 168,0 3,0 2,4 184 46 61,0 179 101 33,0 1,64 10 1 50/32 3196,31 243,0 3,0 2,4 236 46 88,5 286 153 33,0 4,93 10 1 50/40 3196,31 243,0 3,0 3,0 236 46 93,5 286 153 33,0 4,92 10 1 50/50 3196,31 242,0 3,0 3,0 236 46 100,0 286 153 33,0 4,92 10 1 65/20 2961,42 179,0 3,6 1,9 210 33 60,5 184 101 23,0 1,81 10 1 65/25 2961,42 179,0 3,6 2,4 210 33 64,0 184 101 23,0 1,82 10 1 65/32 4158,00 248,0 3,6 2,4 210 33 88,5 284 153 39,0 5,06 10 1 65/40 4158,00 248,0 3,6 3,0 210 33 93,5 284 153 39,0 5,05 10 1 65/50 4158,00 248,0 3,6 3,0 210 33 100,0 284 153 39,0 5,02 10 1 80/15 3328,71 188,0 4,3 4,3 210 33 60,5 187 101 23,5 1,97 10 1 80/20 3328,71 188,0 4,3 1,9 210 33 60,5 187 101 23,5 2,00 10 1 80/25 3328,71 188,0 4,3 2,4 210 33 64,0 187 101 23,5 2,01 10 1 80/32 4570,22 254,0 4,3 2,4 210 33 88,0 286 153 46,5 5,24 10 1 80/40 4570,22 255,0 4,3 3,0 210 33 93,5 286 153 46,5 5,24 10 1 80/50 4570,22 255,0 4,3 3,0 210 33 100,0 286 153 46,5 5,21 10 1 100/15 3598,35 198,0 5,3 1,9 210 33 57,5 191 101 33,5 2,34 10 1 100/20 3598,35 198,0 5,3 1,9 210 33 57,5 191 101 33,5 2,32 10 1 100/25 3598,35 198,0 5,3 2,4 210 33 61,0 191 101 33,5 2,31 10 1 100/32 5275,38 267,0 5,3 2,4 210 33 93,5 286 153 56,5 5,66 10 1 100/40 5275,38 267,0 5,3 3,0 210 33 93,5 286 153 56,5 5,57 16 1 100/50 5943,29 267,0 5,3 3,0 210 33 100,0 286 153 56,5 5,42 10 1

47

Equipaggiato con attuatore pneumatico a doppio effetto (DOEF). Codice base: vedi tabelle Per completare il codice articolo aggiungere la prima cifra del DN e due cifre del dn della valvola Prezzi in Euro/cad With pneumatic actuator and double acting (DOEF). Code valve: see in the tables To complete the valve code add DN and dn size. Price in Euro/pc



DN/dn [mm/mm]

PVDF-UHP EPDM


32932_782

z [mm]

s [mm]

s1 [mm]

l [mm]

l1 [mm]

l2 [mm]

h [mm]

d [mm]

a [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

80/15 3061,12 188 2,8 1,9 210 33 60,5 187 187 23,5 1,88 10 1 80/20 3061,12 188 2,8 1,9 210 33 60,5 187 101 23,5 1,09 10 1 80/25 3061,12 188 2,8 2,4 210 33 64,0 187 101 23,5 1,91 10 1 80/32 4335,30 254 2,8 2,4 210 33 88,0 286 153 46,5 5,15 10 1 80/40 4335,30 255 2,8 3,0 210 33 93,5 286 153 46,5 5,15 10 1 80/50 4335,30 255 2,8 3,0 210 33 100,0 286 153 46,5 5,12 10 1 100/15 3348,71 198 3,4 1,9 210 33 57,5 191 101 33,5 2,22 10 1 100/20 3348,71 198 3,4 1,9 210 33 57,5 191 101 33,5 2,20 10 1 100/25 3348,71 198 3,4 2,4 210 33 61,0 191 101 33,5 2,20 10 1 100/32 5091,92 264 3,4 2,4 210 33 93,5 286 153 56,5 5,53 10 1 100/40 5091,92 264 3,4 3,0 210 33 93,5 286 153 56,5 5,44 10 1 100/50 5726,38 264 3,4 3,0 210 33 100,0 286 153 56,5 5,29 10 1

48

Codice base: vedi tabella. Per completare il codice articolo aggiungere DN della valvola. Prezzi in Euro/cad. Code valve: see in the table. To complete the valve code add DN size. Price in Euro/pc.

valvole mantenimento pressione modello V186, terminali liscipressure retaining valves V186 - butt+IR-fusion ends


DE/DN [mm/mm]

PVDF-UHP PTFE

3581_82

s [mm]

l [mm]

h [mm]

d [mm]

b [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20/15 1480,43 1,9 158 137 83 20 0,60 10 1 25/20 2051,83 1,9 158 137 83 20 0,60 10 1 32/25 2292,92 2,4 198 199 112 27 1,60 10 1 40/32 3514,10 2,4 198 199 112 27 1,60 10 5 50/40 3814,97 3,0 262 290 165 43 8,00 10 5 63/50 4560,81 3,0 262 290 165 43 8,20 10 2

49

Codice base: vedi tabella. Per completare il codice articolo aggiungere DN della valvola. Prezzi in Euro/cad. Code valve: see in the table. To complete the valve code add DN size. Price in Euro/pc.

valvole di sovrapressione modello V185, terminali lisci pressure retaining valves V185 - butt+IR-fusion ends


DE/DN [mm/mm]

PVDF-UHP PTFE

3580_82

s [mm]

l [mm]

h [mm]

d [mm]

b [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20/15 1689,17 1,9 158 137 83 20 0,70 10 5 25/20 2258,33 1,9 158 137 83 20 0,70 10 5 32/25 2673,41 2,4 198 199 112 27 1,70 10 1 40/32 4090,91 2,4 198 199 112 27 1,70 10 5 50/40 4914,85 3,0 262 290 165 43 7,38 10 1 63/50 5247,43 3,0 262 290 165 43 8,10 10 1

50

Codice base: vedi tabella. Per completare il codice articolo aggiungere DN del riduttore. Prezzi in Euro/cad. Code valve: see in the table. To complete the article code add DN size. Price in Euro/pc.

riduttori di pressione modello V82, con manometro, terminali lisci, formati pressure reducing valve V82 with gauge guard - butt+IR-fusion ends, machined


DE/DN [mm/mm]

PVDF-UHP PTFE

3578_82

s [mm]

l [mm]

h [mm]

d [mm]

b [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20/15 1876,55 1,9 150 130 70 30 0,87 10 1 25/20 2610,49 1,9 190 170 100 40 1,78 10 1 32/25 2964,38 2,4 190 170 100 40 2,20 10 1 40/32 3234,61 2,4 240 230 130 55 4,15 10 1 50/40 3490,22 3,0 240 230 130 55 4,15 10 1 63/50 11779,92 3,0 260 285 155 75 6,50 10 1 75/65 12969,72 3,6 300 350 190 100 13,17 6 1

51

Esecuzione senza manometro. Codice base: vedi tabella. Per completare il codice articolo aggiungere DN del riduttore. Prezzi in Euro/cad. Execution without gauge guard. Code valve: see in the table. To complete the article code add DN size. Price in Euro/pc.

riduttori di pressione modello V782, terminali lisci, formati pressure reducing valve V782 - butt+IR-fusion ends, machined


DE/DN [mm/mm]

PVDF-UHP PTFE

3579_82

s [mm]

l [mm]

h [mm]

d [mm]

b [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20/15 1978,23 1,9 172 240 83 48 0,80 10 1 25/20 2918,65 1,9 190 272 112 65 2,20 10 1 32/25 2918,65 2,4 190 272 112 65 2,20 10 1 40/32 5823,77 2,4 262 356 165 95 6,30 10 1 50/40 5823,78 3,0 262 356 165 95 6,30 10 3

52

Codice base: vedi tabella. Per completare il codice articolo aggiungere DN del separatore. Il prezzo si intende manometro escluso. Prezzi in Euro/cad. Code: see in the table. To complete the article code add DN size. Price in Euro/pc (excepted gauge guard).

separatori di pressione a membrana modello Z700, terminale lisciogauge gard type Z700 - butt+IR-fusion ends


DE/DN [mm/mm]

PVDF-UHP PTFE

3584_82

s [mm]

l [mm]

h [mm]

d [mm]

b [mm]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

25/20 793,90 1,9 72 129 63 30 2,20 10 6 32/25 868,34 2,4 100 210 100 30 6,30 10 6

53

Codice base: vedi tabella. Guarnizione - FPM Tubo indicatore - PVDF Corpo galleggiante - PVDF Per completare il codice articolo aggiungere il DN e le prime due cifre della portata massima. Prezzi in Euro/cad Code: see in the table. Seal - FPM Indicator tube - PVDF Float - PVDF To complete the article code add DN and the two first numerals of the maximum flow rate. Price in Euro/pc

misuratori di portata modello M123, terminali lisci flow meter M123 - butt+IR-fusion ends


DE/DN [mm/mm]

PVDF-UHP 3591_8382

s [mm]

l [mm]

h [mm]

D [mm]

Portata Flowrate

[l/h]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

20/15 493,64 1,9 293 185 43 8..80 0,30 10 8 20/15 493,64 1,9 293 185 43 15..150 0,30 10 20 20/15 493,64 1,9 293 185 43 20..200 0,30 10 20 32/25 573,62 2,4 320 200 60 15..150 0,50 10 15 32/25 573,62 2,4 320 200 60 30..300 0,50 10 15 32/25 573,62 2,4 320 200 60 50..500 0,50 10 15 32/25 573,62 2,4 320 200 60 100..1000 0,50 10 10

54

Codice base: vedi tabella. Guarnizione - FPM Tubo indicatore - PVDF Corpo galleggiante - PVDF Per completare il codice articolo aggiungere il DN e le prime due cifre della portata massima. Prezzi in Euro/cad. Code: see in the table. Seal - FPM Indicator tube - PVDF Float - PVDF To complete the article code add DN and the two first numerals of the maximum flow rate. Price in Euro/pc.



DE/DN [mm/mm]

PVDF-UHP 3590_8382

s [mm]

l [mm]

h [mm]

D [mm]

Portata Flowrate

[l/h]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

32/25 848,96 2,4 455 335 60 15..150 0,52 10 2 32/25 848,96 2,4 455 335 60 50..500 0,52 10 15 32/25 848,96 2,4 455 335 60 100..1000 0,52 10 15 50/40 1247,01 3,0 467 335 83 200..2000 1,22 10 10 50/40 1247,01 3,0 467 335 83 300..3000 1,22 10 10 63/50 1803,86 3,0 473 335 103 600..6000 1,68 10 1 63/50 1803,86 3,0 473 335 103 1200..12000 1,68 10 8 75/65 2278,91 3,6 453 335 122 2000..20000 2,90 10 5 75/65 2278,91 3,6 453 335 122 3000..30000 2,90 10 5

55

Codice base: vedi tabella. Guarnizioni - FPM Tubo indicatore - PSU Corpo galleggiante in PVDF. Per completare il codice articolo aggiungere il DN e le prime due cifre della portata massima. Prezzi in Euro/cad Code: see in the table. Seal in FPM. Tubo indicatore - PSU Float - PVDF To complete the article code add DN and the two first numerals of the maximum flow rate. Price in Euro/pc



DE/DN [mm/mm]

PVDF-UHP FPM PSU

3590_8282

s [mm]

l [mm]

h [mm]

D [mm]

Portata Flowrate

[l/h]

Peso Weight

[kg]

MOP [bar]

Conf. Pack.

[Pz/Pc]

32/25 610,06 2,4 443 335 60 50..500 0,52 10 10 32/25 621,67 2,4 443 335 60 100..1000 0,52 10 10 40/32 720,51 2,4 461 335 72 150..1500 0,60 10 10 40/32 720,51 2,4 461 335 72 250..2500 0,60 10 10 50/40 819,45 3,0 459 335 83 200..2000 1,39 10 10 50/40 1029,23 3,0 459 335 83 300..3000 1,40 10 10 50/40 1130,50 3,0 459 335 83 600..6000 1,22 10 10 63/50 1341,74 3,0 461 335 103 600..6000 1,89 10 10 63/50 1341,74 3,0 461 335 103 1000..10000 1,77 10 10 63/50 1461,23 3,0 461 335 103 1500.15000 1,68 10 10 75/65 2816,22 3,6 453 335 122 2000..20000 2,90 10 10 75/65 2816,22 3,6 453 335 122 3000..30000 2,90 10 10 75/65 2838,62 3,6 453 335 122 8000..60000 2,90 10 10

56

Raccordi per saldatura testa a testa Butt Welding Fittings

curve 90 gradi bends 90 degrees 1

curve 90 gradi, con terminali prolungati bends 90 degrees, elongated 2

curve 45 gradi, con terminali prolungati bends 45 degree, elongated 3

gomiti 45 gradi, con terminali prolungati elbows 45 degrees, elongated 4

T 90 gradi normali tees 90 degrees equal 5

T 90 gradi normali, con terminali prolungati tees 90 degrees equal, elongated 6

T 90 gradi ridotti, con terminali prolungati tees 90 degrees reduced, elongated 7

T 90 gradi ridotti, formati tees 90 degrees reduced, machined 8

riduzioni concentriche, formate reducers concentric, machined 10

riduzioni concentriche, con terminali prolungati reducers concentric, elongated 11

riduzioni concentriche con diametri intermedi reducers concentric with intermediate diameters 13

cartelle stub ends 14

cartelle per valvole a farfalla stub ends for butterfly valve 16

calotte, con terminali prolungati end caps, elongated 17

raccordi per strumenti, stampati o formati instrumentation fitting, moulded or machined 18

punti fissi restrained fitting 19

nippli con filetto maschio adaptors male thread 20

nippli con filetto femmina adaptors female thread 21

Raccordi per saldatura testa a testa Butt Welding Fittings

bocchettoni unions 22

Raccordi elettrosaldabili Electrofusion Fittings

manicotti elettrosaldabili electrofusion couplers 23

Tubazioni, flange, valvole ed accessori Pipes, Flanges, Valves and Accessories

tubazioni pipes 24

flange cieche, formate blind flanges, machined 25

guarnizioni piane profilate trimmed flat gaskets 26

morsetti a un nodo sanitary joint 28

cartelle per morsetto rapido, formate stub for sanitary connection, machined 29

guarnizioni profilate per morsetto rapido trimmed gaskets for sanitary connection 30

raccordi di transizione su PFA transition fittings to PFA 31

valvole a sfera a due vie - terminali lisci 2 way ball valves - butt+IR-fusion ends 32

valvole a sfera a due vie di campionatura con o senza accessori 2 way laboratory ball valves with or without accessories 33

valvole a membrana - terminali lisci mobili diaphragm valves - movable butt+IR-fusion ends 34

valvole a membrana - terminali lisci diaphragm valves - butt+IR-fusion ends 35

valvole a membrana - terminali flangiati diaphragm valves - flange connection ends 36

valvole a membrana a T - terminali lisci diaphragm T valves - butt+IR-fusion ends 37

valvole di ritegno a clapet wafer swing type check valves 39

valvole di ritegno a clapet con distanziale wafer swing type check valves with spacer 40

valvole di ritegno - terminali lisci check valves - butt+IR-fusion ends 41

valvole a membrana con attuatore pneumatico e indicatore visivo, terminali lisci diaphragm valves with pneumatic actuator and visual position indication, butt+IR-fusion ends

42


43

Tubazioni, flange, valvole ed accessori Pipes, Flanges, Valves and Accessories


45


47

valvole mantenimento pressione modello V186, terminali lisci pressure retaining valves V186 - butt+IR-fusion ends 49

valvole di sovrapressione modello V185, terminali lisci pressure retaining valves V185 - butt+IR-fusion ends 50

riduttori di pressione modello V82, con manometro, terminali lisci, formati pressure reducing valve V82 with gauge guard - butt+IR-fusion ends, machined

51

riduttori di pressione modello V782, terminali lisci, formati pressure reducing valve V782 - butt+IR-fusion ends, machined 52

separatori di pressione a membrana modello Z700, terminale liscio gauge gard type Z700 - butt+IR-fusion ends 53

misuratori di portata modello M123, terminali lisci flow meter M123 - butt+IR-fusion ends 54



PVDF-UHP - HURNER

Documents

Transcript of PVDF-UHP - HURNER