Product End-of-Life Disassembly Instructionsh22235. ·...

EL-MF877-00

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs

Marketing Name / Model [List multiple models if applicable.]

HP ProBook 4535s Notebook PC

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.

Item Description Notes

Quantity of items included in product

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

With a surface greater than 10 sq cm

3

Batteries All types including standard alkaline and lithium coin or button style batteries

2

Mercury-containing components For example, mercury in lamps, display backlights, scanner lamps, switches, batteries

Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm

Includes background illuminated displays with gas discharge lamps

1

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height

External electrical cables and cords

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above)

Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent chambers, and service stations.

Components and waste containing asbestos

EL-MF877-00

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Components, parts and materials containing refractory ceramic fibers

Components, parts and materials containing radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.

Tool Description Tool Size (if applicable)

Description #1 Motor-screw-driver “+”

Description #2 Motor-screw-driver “*”

Description #3 Motor-screw-driver “-”

Description #4

Description #5

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Follow steps described in Disassembly instruction (file attached). 2. If parts can be removed without using a tool, remove it first. 3. Use correct screwdriver and torque value before unlock the screw 4. 5. 6. 7. 8.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).

制表：牟世芹審核：

MANUFACTURING PROCESS INSTRUCTIONS

MECHANICAL ASSEMBLY

MODEL : SS11 Ramones

注意事项︰手套每天作业前须检查，务必保证手套洁净，如有不洁需及时更换。

作业指导书

Document No. : SS11 Ramones FA DISASS’Y SOP Station :

Name : Ver. : Date :

治具清单(治具规格) 数量治具清单(治具规格) 数量

制表：发行部门：

Step：

牟世芹 IE

Disassemble Battery

1. Disassemble Battery (Fig.1)

1(1/1)

1.00 2011/02/11

电池Fig.1


作业指导书





Step：

牟世芹 IE

. Loosen Battery screws

2(1/1)

1.00 2011/02/11

1. Loosen SET screws (6052B0096601) *1

Disassembly bottom cover (Fig.2)

Torsion：1.5 ± 0.2 Kg/cm.

Screws can't be stripped.

Fig.2

SIM Card 1

导角在右前方插入

Fig.1

Electronic opener of the cross 1


作业指导书





Step：

牟世芹 IE

Disassembly Bottom cover

3(1/1)

1.00 2011/02/11

Fig.1

1. Take out the Bottom cover

(6070B0492301)from

the complete machine down (Fig.1)


作业指导书





Step：

牟世芹 IE

4(1/1)


1.00 2011/02/11Disassemble ODD & loosen screw

1. Loosen screw of

ODD(6052A0010201) *1

(Fig.2)

Torsion：2.0 ± 0.2 Kgf．cm。

The screw can’t be stripped and

can’t be fall into the machine.

2. Take out the ODD from the left

BTCB (Fig.1)。

Fig.1

Fig.2

1


作业指导书





Step：

牟世芹 IE

Tear master label

5(1/1)

1.00 2011/02/11

1. Tear the Master label (6060B1218301) from the

lower shell


作业指导书





Step：

牟世芹 IE

Disassemble DDR RAM

6(1/1)

1.00 2011/02/11

1. Disassemble DDR RAM from upper right corner

of M/B.


作业指导书





Step：

牟世芹 IE

Loosen HDD lower shell screws

1. Loosen HDD lower shell screws

(6052B0096601) *4(Fig.1)


The screw can’t be stripped and

can’t be fall into the machine.

7(1/1)

1.00 2011/02/11


Fig.1

4

3

2

1


作业指导书





Step：

牟世芹 IE

Disassemble HDD

1.Draw HDD backward from M/B end

CNTR , take the HDD out from the

trough, (Fig.1)。

8(1/1)

1.00 2011/02/11


Fig.1


作业指导书





Step：

牟世芹 IE

9(1/1)

Electronic opener of the cross

1

螺丝供应器 1

HDD supporting fixture 1

1.00 2011/02/11Disassemble HDD

1. Put HDD on supporting fixture.(Fig.1)

2. Loosen screws(6052B0131801)*4. (Fig.2)


The screw can’t be stripped and can’t be

fall into the machine.

Fig.2

Fig.1


作业指导书





Step：

牟世芹 IE

10(1/1)

1.00 2011/02/11

assembling line bar 1

1. Disassemble WWAN aerial from the WWAN.

Fig.1

Disassemble WWAN line of 5/6


作业指导书





Step：

牟世芹 IE

Disassemble WWAN card & loosen screws

11(1/1)

1.00 2011/02/11


Fig.1

【有WWAN时】

1.Lossen screws(6052B0096601 M2*3)*2 (Fig.1)


The screw can’t be stripped and can’t be

fall into the machine.

2. Take out WWAN card from M/B end lower

CNTR and Tear WWAN module from

date label, (Fig.1)。

Take out in 30 degrees of M/B CNTR, no

have crookedly.

Press above CNTR with the finger .

1 2


作业指导书





Step：

牟世芹 IE

12(1/1)

1.00 2011/02/11


1. Take out WLAN Antenna cable (2号) from 1~4

trough.(Fig.1)

Fig.1

Disassemble WLAN line of 2

1

2

3

4


作业指导书





Step：

牟世芹 IE

Disassemble WLAN line of 1

13(1/1)

1.00 2011/02/11


1. Take out WLAN Antenna cable (1号) from 1~4

trough.(Fig.1)

Fig.1

1

2

3

4


作业指导书





Step：

牟世芹 IE

Disassemble WLAN card & loosen screws

14(1/1)

1.00 2011/02/11


1. Tear WLAN module with Date label from lower

CNTR of M/B end.

Take out in 30 degrees of M/B CNTR, no have

crookedly.

Press above CNTR with the finger .

2. Loosen screws(6052B0096601 M2*3) *2 (Fig.1)


Screws can’t be stripped and can’t be fall into

machine.

Fig.1

1 2


作业指导书





Step：

牟世芹 IE

Loosen battery trough screws

1. Loosen battery trough screws(6052B0096201)

*3



machine.

15(1/1)

1.00 2011/02/11


321


作业指导书





Step：

牟世芹 IE

16(1/1)

1.00 2011/02/11

1. Loosen screws from left of ODD.

(6052B0096601) *3.



machine.

Loosen screw from head to foot


3

2

1


作业指导书





Step：

牟世芹 IE

Loosen screw from BTCB of four corners

1. Loosen screw ( 6052B0185501) *4 from

BTCB of four corners.


Screws can’t be stripped and can’t be

fall into machine.

17(1/1)

1.00 2011/02/11

梅花电动起子 1

4

32

1


作业指导书





Step：

牟世芹 IE

Loosen(in bottom cover )screw

1. Loosen screw(6052B0185501) *3 。



machine.

18(1/1)

1.00 2011/02/11

3

21



作业指导书





Step：

牟世芹 IE

1. Loosen screws of keyboard

6052B0185501*3

Torsion：2.5 ± 0.2Kgf．cm。

Screws can’t be stripped and can’t

be fall into machine.

19(1/1)

1.00 2011/02/11

1

2

3

Loosen(in bottom cover)screw



作业指导书





Step：

牟世芹 IE

1. Loosen screws (6052A0039501 *2 )of

Keyboard .

Torsion：2.5 ± 0.2Kgf．cm。

Screws can’t be stripped and can’t be fall

into machine.

Loosen screw of K/B

20(1/1)

1.00 2011/02/11


1

2


作业指导书





Step：

牟世芹 IE

Disassemble K/B of TPCB

21(1/1)

1.00 2011/02/11

1. Disassemble Keyboard from upper shell,

Open the lower side , disassemble both

sides 4 cards and 6 cards above. (Fig.1)

Fig.1


作业指导书





Step：

牟世芹 IE

Disassemble K/B from upper shell

22(1/1)

1.00 2011/02/11

1. Take out FFC from middle broken hole of

M/B (Fig.1)

Fig.1

K/B FFC


作业指导书





Step：

牟世芹 IE

Take down FFC from M/B

1. Take down Power/B FFC from

M/B .(Fig.1)

For F/P时

2. Take down Finger/B FFC from M/B

CNTR从 (Fig.2)

23(1/1)

1.00 2011/02/11

Fig.1

Fig.2

Power/B

FFC

Finger/B

FFC


作业指导书





Step：

牟世芹 IE

Disassemble FFC from M/B

1. Disassemble speaker cable and

Launch/B FFC

from M/B end CNTR(Fig.1)

24(1/1)

1.00 2011/02/11

Fig.2

Speaker

CNTRLaunch/B

FFC

Fig.1


作业指导书





Step：

牟世芹 IE

1. Loosen upper screws(6052B0185501) *3。

Torsion: 2.5 ± 0.2Kgf．cm


machine.

Loosen screws of upper and lower shell

25(1/1)

1.00 2011/02/11

23

1



作业指导书





Step：

牟世芹 IE

1. Loosen screws(6052B0185501) *3。

Torsion: 2.5 ± 0.2Kgf．cm


machine.

26(1/1)

1.00 2011/02/11

3

1

2


Loosen screws of upper and lower shell


作业指导书





Step：

牟世芹 IE

Disassemble upper shell

1. Fetch the card colludes of low upper

shell from lower shell , then

disassemble both side the card

colludes , at last disassemble up

card colludes. (Fig.1)

27(1/1)

1.00 2011/02/11

Fig.1

4

2

5

1

23

6


作业指导书





Step：

牟世芹 IE

Disassemble FFC

1. Disassemble Card reader/B FFC from MB

CNTR(Fig.1)

28(1/1)

1.00 2011/02/11

Fig.

1


作业指导书





Step：

牟世芹 IE

Disassemble Lid switch/B . Tear Mylar

29(1/1)

1.00

1.Tear Mylar from fan (6054B0662001).(Fig.2)

2. Disassemble Lid switch/B FFC MB CNTR.

CNTR

position

2011/02/11

Fig.2

Fig.1


作业指导书





Step：

牟世芹 IE

1. The right aerial through the hole of

BTCB.(Fig.1)

2 . Disassemble aerial from the 1~4

trough of lower shell (Fig.2)

30(1/1)

1.00Disassemble Hinge right aerial

Fig.1

Through line

position

Fig.2

4

3 21

2011/01/21


作业指导书





Step：

牟世芹 IE

Disassemble left aerial of Hinge

1. Disassemble low aerial from 1~3

trough of lower shell. (Fig.2)

2 . The left aerial through the hole of

BTCB.(Fig.1)

31(1/1)

1.00

Fig.1

Through line

position

Fig.2

3

2 1

2011/01/21


作业指导书





Step：

牟世芹 IE

Disassemble LCM line

1. Disassemble LCM cable from the

CNTR of M/B end.

2. Disassemble cable from the trough of

lower shell.

32(1/1)

1.00 2011/02/11

Fig.1

Fig.2


NG

CNTR position


作业指导书





Step：

牟世芹 IE

1. Loosen screw of left LCM.

(6052B0185501) *1 .(Fig.1)

Torsion：3.5 ± 0.2 Kg/cm。

Screws can’t be stripped and

can’t be fall into machine.

2. Disassemble Camera cable from

CNTR of M/B end, and take out

cable from trough of lower shell.

(Fig.2)

Loosen LCM screw

33(1/1)

1.00 2011/02/11

Fig.1

Fig.2


1

CNTR position


作业指导书





Step：

牟世芹 IE

Disassemble LCM and loosen screw

34(1/1)

1.00 2011/02/11

Fig.2

1. Loosen left screw .(Fig.1/Fig.2)

(6052B0185501) * 3


Screws can’t be stripped and can’t

be fall into machine.

Fig.1

2

3

1



作业指导书





Step：

牟世芹 IE

1. Disassemble FFC from CNTR of M/B end and

tear FFC. (Fig.2/Fig.3)

2.Lossen screws *2 (6052A0010201)

(Fig.1)。

torsion：1.5 ± 0.2 Kg/cm


machine.

3. Disassemble USB/B from lower shell

(1310A2411401) 。

Disassemble USB/B

35(1/1)

1.00 2011/02/11


Fig.1

Fig.2 Fig.3

1

2

背胶1

背胶2


作业指导书





Step：

牟世芹 IE

36(1/1)

1.00

【 When there is RJ11 Modem 】

1. Disassemble end son from trough and the line

block the wall. (Fig.3)

2. Disassemble cable from the trough of lower

shell and tear acetic sticky tape.(Fig.2)(Fig.1 )

【 When there isn’t RJ11 Modem 】

1. Take out Dummy RJ11 from the RJ11 trough of

lower shell. (6070B0493001)(Fig.4)

Disassemble RJ11 cable

3 12

Fig.1

Fig.2

Fig.3 Fig.4

2011/01/21


作业指导书





Step：

牟世芹 IE

【有RJ11 Modem时】

1.Loosen Modem screw(6052B0010201) *2

Torsion：2.0 ± 0.2 Kg/cm

Screws can’t be stripped and can’t be fall

into machine.

2. Disassemble RJ11 cable (6017B0300301 )

from Modem CNTR .(Fig.1)

Disassemble Modem from M/B CNTR.(Fig.3)

3.Tear label from Modem module

Disassemble Modem module

37(1/1)

1.00 2011/02/11

Fig.1

Fig.2


2

1


作业指导书





Step：

牟世芹 IE

38(1/1)

1.00

1. Tear Mylar from CNTR of battery.(Fig.3)

2.Disassemble acetic Sticky tape from M/B.

Take out ODD/B FFC from CNTR of

M/B end .(Fig.2)

3.Loosen screws of low left on M/B.

(6052A0005201) *1 .(Fig.1)

Torsion： 2.0 ± 0.2 Kg/cm。


fall into machine.

Disassemble ODD/B FFC

Fig.1

Fig.2

screw

Fig.3


2011/02/11


作业指导书





Step：

牟世芹 IE

39(1/1)

1.00 2011/02/11

1.Take out cable line during trough and

fan.( Fig.3)

2. Disassemble end son from DC hole of

lower shell , then disassemble DC in

cable from lower shell. (Fig.2)

3. Loosen screw of CNTR battery

(6052A0010201) *2 (Fig.1)。



fall into machine.

Disassemble BATT CNTR


Fig.1

1 2

Fig.2

Fig.3


作业指导书





Step：

牟世芹 IE

40(1/1)

1.00 2011/02/11

1. Lift up DC cable and battery cable, then

disassemble M/B from lower shell. (Fig.1)

Disassemble M/B from BTCB

Fig.1


作业指导书





Step：

牟世芹 IE

Disassemble ODD/B

1. Pull out ODD/B from trough ,then

disassemble ODD/B from middle

position of lower shell. (Fig.1/Fig.2)

41(1/1)

1.00 2011/02/11

Fig.2

Fig.1


作业指导书





Step：

牟世芹 IE

Disassemble FAN & cable

1. Put M/B on supporting fixture witch B side

towards up. (Fig.1)

2.Loosen screw and disassemble fan from up

right of M/B. (Fig.2)



machine.

42(1/1)

1.00 2011/02/11

Fig.1

M/B B side supporting fixture 1


Fig.2

screwCNTR


作业指导书





Step：

牟世芹 IE

Disassemble Battery cable


towards up. (Fig.1)

2.Disassemble acetic Sticky tape from DC in

cable(Fig.3)。

3. Disassemble Battery cable from middle up

position CNTR of M/B.(Fig.2)

43(1/1)

1.00 2011/02/11

Fig.1


Fig.2Fig.3


作业指导书





Step：

牟世芹 IE

Disassemble DC cable


towards up. (Fig.1)

2. Disassemble DC in cable from right up position

CNTR of M/B.(Fig.2)

44(1/1)

1.00 2011/02/11

Fig.1


Fig.2


作业指导书





Step：

牟世芹 IE

Disassemble Thermal

For Discrete:


towards up. (Fig.1)

2. Loosen thermal SET screw.

Discrete : screw * 2 . (Fig.2)

Torsion： 2.5 ± 0.2Kgf．cm


machine.

Fetch and put Thermal can’t hold the place

manage copper.

45(1/1)

1.00 2011/02/11



Fig.2

Fig.1

Discrete

2

1


作业指导书





Step：

牟世芹 IE

Disassemble Thermal

1 .Put M/B on supporting fixture witch B side

towards up. (Fig.1)

2. Disassemble Thermal from M/B.

3. Loosen thermal SET screw。Discrete : screw * 4 . (Fig.2)

UMA : screw * 4 (Fig.3)

Torsion： 2.5 ± 0.2Kgf．cm


machine.

46(1/1)

1.00 2011/02/11



Fig.2

Fig.1

UMAFig.3

Discrete

1

2 3

4 1

2

4

3


作业指导书





Step：

牟世芹 IE

47(1/1)

1.00 2011/02/11


一字起 1

吸笔 1

Fig.1


towards up.(Fig.1).

2. For 45W(CPU),disassemble maylar

(6054B0944401).

3. Disassemble CPU from CPU SOCKET,

(Anticlockwise loosen). (Fig.2)

Fig.2

Fig.3

Disassemble CPU

Product End-of-Life Disassembly Instructionsh22235. ·...

Documents

Transcript of Product End-of-Life Disassembly Instructionsh22235. ·...