Practicas Con Openscad
Transcript of Practicas Con Openscad
2013
OpenScad
PRÁCTICAS CON OPENSCAD
Que es el openscad: OpenSCAD es un software para la creación de sólidos 3D.
Para mas informacion pincha aqui
Pincha aquí para descargártelo: http://www.openscad.org/downloads.html
PRÁCTICA 1 : HACER UN CUBO.
cube([2,3,4]);
PRÁCTICA 2: HACER UN CILINDRO.
cylinder(h=40,r=10);
PRÁCTICA 3: ESFERA
sphere(20);
Mario Peña Tabernilla IES Valentin Turienzo
2013
OpenScad
PRÁCTICA 4: POSICIONAR UN OBJETO
cube([2,3,4]);translate([3,0,0]) { cube([2,3,4]);}
Ejercicio:
.- Hacer una cruz colocando 3 cubos en cada uno de los ejes.
PRACTICA 5: CUBO INTERSECTADO POR UN CILINDRO.
difference() {cube(30, center=true);sphere(20); } translate([0, 0, 30]) {cylinder(h=40, r=10); }
Mario Peña Tabernilla IES Valentin Turienzo
2013
OpenScad
Mario Peña Tabernilla IES Valentin Turienzo
2013
OpenScad
PRÁCTICA 6: COLORES.
color([1,0,0]) cube([2,3,4]);translate([3,0,0])color([0,1,0]) cube([2,3,4]);translate([6,0,0])color([0,0,1]) cube([2,3,4]);
Ejercicio:
.- Haz el ejercicio 4 con un color en cada parte de la cruz.
Solución:
translate([3,0,0]) color([1,0,0]) sphere(1);
translate([6,0,0]) color([1,0,0]) sphere(1);
translate([9,0,0]) color([1,0,0]) sphere(1);
translate([0,3,0]) color([0,1,0]) sphere(1);
translate([0,6,0]) color([0,1,0]) sphere(1);
translate([0,9,0]) color([0,1,0]) sphere(1);
translate([0,0,3]) color([0,0,1]) sphere(1);
translate([0,0,6]) color([0,0,1]) sphere(1);
translate([0,0,9]) color([0,0,1]) sphere(1);
Mario Peña Tabernilla IES Valentin Turienzo
2013
OpenScad
translate([-3,0,0]) color([1,1,0]) sphere(1);
translate([-6,0,0]) color([1,1,0]) sphere(1);
translate([-9,0,0]) color([1,1,0]) sphere(1);
translate([0,-3,0]) color([0,1,1]) sphere(1);
translate([0,-6,0]) color([0,1,1]) sphere(1);
translate([0,-9,0]) color([0,1,1]) sphere(1);
translate([0,0,-3] )color([1,1,1]) sphere(1);
translate([0,0,-6]) color([1,1,1]) sphere(1);
translate([0,0,-9]) color([1,1,1]) sphere(1);
Otros:
Mario Peña Tabernilla IES Valentin Turienzo