Productintroduction...上海恒准仪器科技有限公司DONGGUANLIXIANINSTRUMENTSCIENTIFICCO.,LTD...

上海恒准仪器科技有限公司 DONG GUAN LIXIAN INSTRUMENT SCIENTIFIC CO.,LTD

Tel：+86 769-23388229 Fax:+86 769-23388227Website：www.dglixian.com E-mail: [email protected], [email protected]:Xinhe Management of area, Wanjiang District, Dongguan city, Guangdong province, China

Product introductionName：HZ-1005D Electronic computer control material testing machine

设备概述：

mailto:[email protected]




Machine summary:

HZ-1005 Electronic computer control material testing machine is a new material testing machine

that combined with the electronic technology and mechanical transmission,support electronic display and

computer display. It has accurate load speed, range of force measurement, has high accuracy and

sensitivity for the load, displacement measurement and control. This series machine with a single space of

structure, mainly is suitable for the test load lower than 5 kn metal, non-metallic materials. The machine can control the

stress, strain and displacement, can find out the most energetically, tensile strength, bending strength, compression

strength, elastic modulus, breaking elongation, yield strength and other parameters.

Main function:

This machine suitable for rubber, plastic, tires, rubber hose, adhesive tape, sole, thin films, the force that press a

gram, FRP, ABS, EVA, PU, TPU, aluminum-plastic pipe, composite materials, waterproof materials, fiber, textile, wire and

cable, paper, gold foil, belt, silk thread, spring, wood, pharmaceutical packaging materials, adhesive tape and so on,

support tensile, compression, tear, peel (either 90 degrees and 180 degrees) and other mechanical properties of testing

and analysis.

Main features:

1. Adopt Taiwan servo motor drive, through the drive mechanism drives the beam move up and down, realize the test

loading process.

2. The whole control system with high cost performance and high reliability.

3. Adopt computer control the whole test process, dynamic display of real-time load value, displacement and deformation

value, the test speed and test curve.

4. Analysis of the data processing by computer, the results can be automatically saved, after the test to bring up the

experiment curve, through curve traversal repeat test process, or curve comparison, amplification.

5. Has strong data and graphics processing functions, can be printed out complete test reports and test curve.

6. Has perfect limit protection, overload protection, stop and other security protection function.

Meet standards:

GB/T16491-1996 electronic universal testing machine

Applicable industry：It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing,medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products,

C:/Documents%20and%20Settings/cy/Local%20Settings/Application%20Data/Youdao/Dict/Application/6.2.54.8018/resultui/frame/javascript:void(0);








colleges and universities; research laboratories; inspection arbitration, technical supervisiondepartments and many other industries, it is the basic equipment for quality management and physicaltested.

Technical parameter:

Model HZ-1005DDisplay computer screen and LCD screen

Max. load 100N，200N，500N，1KN，2KN，5KN，optional

Accuracy grade 1grade/0.5grade

Effective load range 0.2％～100％（1grade）/0.4％～100％（0.5grade）Test accuracy Less than indicating value±1％/less than indicating value±0.5％Tester resolution Max. Load 1/200000，Do not step inside and outside, and all the resolution remains the same

load cell basic equipment：tensile、compression sensor（Max. load）1pcsextension configuration ：Additive with multiple sensors

Effective width of test 400mm(custom)Effective tensilespace

780mm（custom）

Test speed range 0.001～500mm/minThe displacement

measurement

accuracy

Less than indicating value ±0.5％;Less than indicating value±0.2％

The deformation

measurement system

（optional ）

extension configuration：Extensometer :The Min. gage:10mm; deformation range:800mmextension configuration：Metal Extensometer ：gage:25mm、50mm、100mm deformation

range:5mm、10mm、25mmDeformation testaccuracy

Less than indicating value±0.5％

Test bench safetydevice

Electronic limit protection

Test bench lifting gear fast/slow speed automatic control, which can point move

Test bench returnsthe function

Manual or automatic two options,automatically or manually at the highest speed back to test the

initial position after the test

Overload protection More than the Max. load 10％，the machine automatic protectionFixture configuration Tensile fixtures 1 set

Scalable configuration Custom fixture according the sample or test standardsSize of the host 600x450x1800mm(L*W*H)Power supply 220V、50HZ、

Power 0．75KW（according the Max load，equip different power motors ）Weight of the host About 500 Kg







Software features:

1.The software description about Computer servo testing machine

A. function of standard modular: provide users with the necessary applications to the test, covering GB,ASTM, DIN, JIS, BS ... and other testing standard specification.

B. tested product information: provide users with the data to set about the products, one time to inputand re-use permanently . for improving the accuracy, the data can be corrected by the formulaautomatically.

C. Dual-Report Editor: provide users with the reported format that users choose (testing program addEXCEL reported format, Extend the previous single pattern of statements)

D. the data’s unit of length and force can be exchanged, unit of force is T, Kg, N, KN, g, lb, unit of lengthis mm, cm, inch.

E. auto-optimization of graphic scale, display the best measurement of graphics. It can test the movingexchange in graphics. It has the load - displacement, load - time, displacement - time, stress - strainload -2 points extending maps, and lots of graph compared.

F. Test results can be output in EXCEL format.G. testing result can be automatically preserved or manual preserved, after the test, it can automaticallycalculate the most strength, up and down yield strength, loop method, best method, non-proportionalextended strength, tensile strength, compression strength, tensile strength at any point, constant loadextension, elastic modulus, rate of elongation, peel range of maximum force, minimum force, averageforce, total energy, bending modulus, x% load in break displacement, load X% in break displacement,and so on . the test data can be stored in any disk.H. Software has a capability that can output the before data.

2.The accessories about Computer servo testing machineA. warranted book within one-year and operating instructions.B. a group of fixtureC. testing software for tensile machine.D. a set of brand computer, color printer

3. items can be tested in the Computer servo testing machineCommon items: ( display data and calculation )●tensile stress ● tensile strength● tensile strength ● rate of elongation at break●fixed stress ● rate of stress at break●stress strength ● tear strength●the value of force at any point ●rate of elongation at any point●pull-out strength ● force of adhesion and the peak of force

1. Elastic coefficient





Definition: The ratio of synchronous normal stress component and normal strain. Test material stiffness coefficient, the

value more higher,the material more strong.

2. Proportional limit：Load within a certain range is proportional to the elongation can be maintained, the Max. stress

is ratio limit.

3. Elastic limit：the Max. Stress of the material can bear but can not permanent deformation.

4. Elastic deformation：remove the load，the deformation of material complete obiteration.

5. Permanent deformation：remove the load，material residual deformation。

6. Yield point：when the material tensile test，deformation increase fast and stress is constant，this point is

yield point. The yield point have up and down tow points, general the up yield point as yield point.

Yield: Load exceed ratio limit and isn’t proportional to the elongation, load decrease suddenly, then in a period of time，

up and down，elongation with great change, this phenomenon is called the yield.

7. Yield strength:When tensile, permanent elongation reaches a certain specified value of the load, divided by

the parallel of the original sectional area, is the result.

8. Spring K value: The ratio of with deformation phase force component and shape change.

Main configuration as follows：

High precision imported American sensor 1pcs

Imported servo control system 1 set

AC servo motor 1PCS

The Taiwan high precision ball bearing + ball screw 2 sets

Motor directly supporting Taiwan reduction mechanism 1set

四.Computer servo control material testing machine software operation interface

1.Choose you need units,setting==>unit





2.There are so many unit,just choose you need.

3.Connect computer and software online.Setting==>Online==>COM1 or COM2...,after it show successconnect.





4. Test results





5. Computer servo control material testing machine test curve



Productintroduction...上海恒准仪器科技有限公司DONGGUANLIXIANINSTRUMENTSCIENTIFICCO.,LTD...

Documents

Transcript of Productintroduction...上海恒准仪器科技有限公司DONGGUANLIXIANINSTRUMENTSCIENTIFICCO.,LTD...