Page 2 of 7 - moee.gov.mm Tender Form Full Budg.cc.pdf ·...

of 7

မတတ က

- ညနကား ရးမ းချပရး၊ လပစစဓာတအားပလတ ရးနငကပက ရးဦးစးဌာန

- ဒတယညနကား ရးမးချပ၊ ဓာတအားစနစဌာန

- ညနကား ရးမ း၊ ဘ ာ ရးဌာန

- ရးလကခ

- မာ

of 7

Attached to.Tender No. 7 (T)/DPTSC (PSD)/ 2018-2019

Dated - 18 - 10 - 2018

တငဒါစညးကမးချကများ

၁။ စျးနနးလာများက Site အ ရာကတနဘး (နငငြခား င- USD) DDP (At Site) ြဖင ပးသငး

ရပါမည။

၂။ စျးနနးလာတင ပစစညး ပးသငးနငမည အချနအတအကျ ဖာြပထားရမည။

၃။ စျးနနးလာ၏ စျးနနးတညမမကာလသည စျးနနးပတရကမ (၃) လအတငး တညမမရ

စရမည။

၄။ စျးနနးလာများက စာအတတငထည၍ စာအတ၏အ ပ ဘကထပတင တငဒါအမတနင

တငဒါပတရကများက ထငရားစာ ဖာြပထားရမည။

၅။ ပစစညး၏အချကအလကများ Detail Technical Specification Of Each နင တငသငးသည

ကမပဏနင သကဆငသည အချကအလကများက စာအတတစအတြဖငလညး ကာငး စျးနနးလာက

စာအတတစအတြဖငလညး ကာငး၊ သးြခားစထည၍ စစ ပါငး စာအတ(၂)အတြဖင ပးတ ပးပ

ရပါမည။

၆။ တငဒါဝင ရာကယဉ ပငမည ကမပဏ၏ ကမပဏမတပတငမတတ ၊ Company Profile ၊ ယခင

ဝင ရာကယဉ ပငခဘးပါက အ ထာကအထား၊ င ကးခငမာမအ ြခအ နများက Technical

Proposal တင ထညသငး ဖာြပရပါမည။ လအပပါက မတတမးဓာတပများြဖင ဖာြပနငပါသည။

( နာကဆကတ - က)

၇။ အြမန ချာပ ၊ Fax ၊ E-mail တြဖင ပးသငးလာ သာ စျးနနးလာများက လးဝ လကခ

လမမညမဟတပါ။

of 7

၈။ တငဒါ ခ ဆထား သာ ပစစညးများအတက ကမပဏများမ ပးသငးလသည Type, Model,

Brand, Country of Origin , Certificates, Testing Reports စသြဖင Specification

ြပညစစာ ထညသငး ဖာြပရပါမည။ Technical အဆြပလာနင Company Profile အတက

မရငး(Original) (၁) စနင မတတ (Copy) (၂)စ တငြပ ပးရပါမည။ Original နင Copy

အမတအသားများ ဖာြပပါရရနနင Soft Copy CD (၁) ချပြဖင တငြပရမည။

၉။ Guaranteed Technical Specification များတင မမအမနတကယ တငသငးမညပစစညး၏

Specification များကသာ ဖာြပရနနင အာငြမငခပါက တငဒါပါအချကအလကများအတငး

ပးသငးရပါမည။

၁၀။ Guaranteed Technical Specification ဖာြပချကတင မမအမနတကယ တငသငးမည

ပစစညး၏ Technical Catalogue, Instruction Manual / User Guide စသည စာရက

စာတမးများက ပးတတငြပရနနင လအပပါက ပစစညးနမနာ (Sample) တာငးခမည

ြဖစပါသည။

၁၁။ Technical Catalogue များတင မမတငသငးသည ပစစညး၏ Model ၊ Type ၊ Technical

Specification အမျးအစားများက သသာထငရားစာ တ ြမငနင အာင High Light ြပလပ

ပးရမညြဖစပါသည။

၁၂။ တငဒါ အာငြမင၍ စာချပ ချပဆရန ရးချယခရပါက တငဒါ အာငြမငသည ကမပဏသည

ြပညတငးအခနများဦးစးဌာနရးတင စာချပတနဘး၏ ၁%နနး(သ) တနဘးသည ကျပသနး

၁၅၀နငအထကြဖစပါက ကျပ ၁၅၀,၀၀၀ တန အခနတဆပ ခါငးကပရန ဆာငရက ပးရ

မညြဖစပါသည။ ယငးသည စမကနးနငဘ ာ ရးဝန ကးဌာန၏ တညဆဥပ ဒ / စညးမျဉး

စညးကမးအတငး ပး ဆာငရမညြဖစ ပး ြပာငးလမရပါက ယငး ြပာငးလမအတငး

လကနာရမညြဖစပါသည။

၁၃။ တငဒါတငသငးသ၏ စျးနနးလာပါ စာအတနင Technical Specification ပါ စာအတတက

တငဒါပတရကမသာ လကခမညြဖစပါသည။

of 7 ၁၄။ တငဒါပတရကတင သတမတထား သာအချနထက နာကကျတငသငးလာသည တငဒါများအား

လးဝ လကခမညမဟတပါ။ တငဒါတငသငးလာ သာ စျးနနးများအား စျးဆစညနငးမ

ြပလပမညမဟတပါ။ တငဒါ ခ ယထား သာ ပစစညးများအနက တစစတတစပငး တငဒါ

တငသငးြခငးက လကခစဉးစားမညမဟတပါ။

၁၅။ တငဒါပတရကတင ဘဏ၌ ပးသငး ပး သာ တငဒါအာမခစ ပ ငကျပ- ၁၄,၉၆၀,၀၀၀/-

(ကျပ တစရာ လးဆယကးသနး ြခာက သာငးတတ) အာမခ Letter of Guarantee

(Original) (မရငး) အား လပစစဓာတအားပလတ ရးနငကပက ရးဦးစးဌာန ၊ ဘ ာ ရး

ဌာနခသ တငသငးရနနင ပးသငး ပး ကာငးအ ထာကအထား (မတတ )က ပစစညးစမ ရး

ဌာနသ တငြပရမည။ တငဒါ ရးချယြခငးမခရပါက အဆပါတငဒါအာမခစ ပ ငအား တငဒါ

လပငနးစဉများ ပးဆးသညအချနတင ြပနလညထတ ပးမညြဖစသည။ စျးနနးလာနငအတ

Technical Specification စာအတတက တငဒါပတသညရကမသာ လကခမညြဖစပါသည။

၁၆။ ဝယယမည အချကအလကအစအစဉများနင ပတသက၍ မရငး၍ မးြမနး ဆး နးလပါက

ဓာတအားစနစဌာန (၀၆၇ - ၃၄၁၀၃၃၄) သ တကရကဆကသယ မးြမနး စစမးနငပါသည။

၁၇။ Technical Evaluation ြပစရာတင အမတစဉ (၉) ပါ စာရကစာတမးများတငပါ သာ

Specifications များကသာ စဉးစားပါမည။

၁၈။ DPTSC Specifications တင ဖာြပထား သာ Country of Origin မပါ သာ နငငများမ

ထတလပသည ပစစညးများက Technical Evaluation ြပလပရာတင ထညသငးစဉးစားမည

မဟတပါ။

၁၉။ တငဒါ စျးနနးများသည ဌာန၏ကမးခငး စျးထက ကျာလန နပါက ယငးတငဒါအား

ပယဖျက ပး အသစြပနလည ခ ဆ ဆာငရကသားပါမည။

၂၀။ စျးနနးတကချက တငသငးရာတင နငင တာသ ပး ဆာငရမည အခနအခအားလး

တစပါတညး တကချကတငြပသားရမည။

of 7 ၂၁။ တငဒါ ရးချယ အတညြပြခငးခရမည ကမပဏသည စာချပ ချပဆ ပး နာက (၁) လအတငး

စာချပတနဘး၏ ၁၀% အား Performance Bank Guarantee အြဖစ ပစစညး ပးသငးသမ

ပးသငးရမည။

၂၂။ ပစစညးများ ပးသငးသညအခါ စာချပပါအတငး ပးသငးရပါမည။ ( Technical Parameter ၊

Brand နင Country of Origin ြပာငးြခငး ၊ စျးနနး ြပာငးြခငး ၊ ပစစညးအမျးအစားနင

အ ရအတက ြပာငးြခငး)တအား လးဝလကခမညမဟတပါ။

၂၃။ Delivery Schedule နင Completion Date အား စာချပပါ သတမတထားသညအတငး

ဆာငရကရနနင အ ကာငးြပချက ခငလမမရဘ သတတမးတးြမင ပးမညမဟတပါ။

၂၄။ ဝယယမညပစစညးများအတက Factory Acceptance Test များအား ထတလပသညနငင၊

စကရ၌ ြပလပချနတင Witness အြဖစ တက ရာကကညရရနအတက ဌာနအငဂျငနယာ

များအား ဖတကား ဆာငရကြခငးက တငဒါပါ အချကများအတငး ဆာငရက ပးရပါမည။

၂၅။ တငဒါ အာငြမင၍ပစစညးများ ပးသငး ပး Warranty Period က အချနကာလအတငး

ဖာြပ ပးရ ပါမည။ Item (၁)မျးချငးအတက စျးနနး ဖာြပ ပးရပါမည။

၂၆။ After Sale Service အ နြဖင Periodic Maintenance ဆာငရက ပးမည အစအစဉက F.O.C

ြဖင ဖာြပ ပးရပါမည။

၂၇။ တငဒါစစစ ရးချယြခငးက ပးတပါ အချကအလကများအတငး စစစမညြဖစပါသည။

၂၈။ ကမပဏများသည မမတကမးလမးထား သာ Brand အတက Manufacturer ၏LETTER OF

AUTHORIZATION (ORIGINAL)အား တငဒါပတသည နတင တစပါတညး ပးတတငြပရ

မည။

၂၉။ ြပညတငးအခနဦးစးဌာနမ အခနကငးရငး ကာငး ထာကခစာအား တငဒါပတသည နတင

တစပါတညးတငြပရမည။

၃၀။ ၂၀၁၈-၂၀၁၉ ဘ ာ ရးနစ၊ ဘ ာ ငရရမ ပ မတည၍ ဆကလက ဆာငရကသားပါမည။

of 7 နာကဆကတ (က)

ကမပဏနငသကဆင သာ လအပသည အချကအလကများ

တငဒါတငသငးသည ကမပဏများသည အာကပါအချကအလကများက ြပညစစာြပလပ၍

တငသငးသားကရမည။ တငသငးသည အ ထာကအထား စာရကစာတမးများ၏ စာမျကနာတငးတင

ကမပဏတဆပနင ကမပဏမ အထးအာဏာ ပး လအပထားသ၏ လကမတများပါရရမညြဖစပါသည။

(က) Bidder’s Qualifications ( ကမပဏဆငရာ အချကအလကများ)

(၁) ကမပဏမတပတငလကမတမတတ ( သကတမး ကျာလနြခငး မရရပါ)

(မပါရပါက သမဟတ တငဒါ ခ ယမနင သကဆငမမရသည ကမပဏ

မတပတငြဖစပါက တငဒါအား လးဝ ရးချယြခငးြပမည မဟတပါ။

(၂) ရယယာပငဆငမ (သးနစအတငး)

(၃) ကမပဏဖ စညးပဇယားနင သငးဖ မမတတမး။

(၄) ကမပဏ၏ ယခင ဆာငရကခဘး သာ အ တအကများနင အာငြမငမများ

(၅) Production (or) Manufacturing Capacity

(ခ) Experience in Similar Work or Sale ။ လနခသည(၃)နစအတငးတည ဆာက၊

လပကင၊ ချပဆ ဆာငရကခသည အချကအလကအ ထာကအထားနင င ကး

ပမာဏ (ဝနကးဌာနများြဖင သာလညး ကာငး၊ ြပညနယ/တငး ဒသကးအစးရများ

ြဖင သာလညး ကာငး၊ ပဂဂလကက တင သာလညး ကာငး ဆာငရကခမများပါ

အကးဝငပါသည။

(ဂ) Legal Financial Position (ဘ ာ ရးဆငရာ အ ြခအ န)

Audited Financial Statement and Cash Flow for (1 Year)

(ဃ) Delivery / Work Schedule.

ItemNo.

145 kV, 50 MVar Shunt Capacitor with Switchbay

Bill of Quantities for 145 kV, 50 MVar Shunt Capacitor & Switchbay equipments

Description Unit Qty.

1 145kV Single pole SF6 Gas Circuit Breaker145kV, 1600A, 40 kA, outdoor, live tank type, single pole , SF6 gas circuit Set 2breaker with 230 V dc motor operated mechanism and supporting steel structure, foundation bolts and nuts, termainal clamps and other necessary accessories must be included.- Gas filling kit consists of pressure reducing valve with two manometers, filling hose, adapter suitable - 1 Set for each GCB- Gas leakage detector - 1 No for each GCB- SF6 gas bottle (40 kg) - 1 Set for each GCB

52 145kV, 1600A, 40kA, air insulated double break Disconnecting Switch with 230Vdc motor operated mechanism. Also supporting steel structure, terminal clamps, foundation bolts & nuts and other necessary accessories must be included.

(a) without earth switch Set 2

3 145kV outdoor tank type oil immersed porcelain housing single pole 3 145kV, outdoor, tank type, oil immersed, porcelain housing, single pole Current Transformer, outdoor type, accuracy class 0.2, 0.5, 5P20, 5P20, 5P20 rated burden 50VA for each core and supporting steel structure, foundation bolts & nuts, terminal clamps and other necessary accessories must be included.(1) 200-400/1/1/1/1/1 A Set 2(1) 200 400/1/1/1/1/1 A Set 2

4 Single pole, Polymer housing, metal-oxide surge arrestor without gaps for Set 250Hz, nominal system voltage 132 kV and hightest voltage 145 kV and supporting steel structure, foundation bolts & nuts, terminal clamps, Surge Counter and other necessary accessories must be included.y

5 145 kV Capacitor Bank, Rating - 145kV, 50MVar, 50Hz, Ungrounded Set 2double star (YY) built in discharge resistor, fuseless, polypropylene film with current limiting reactor.

6 145 kV control and relay panel for Capacitor Bank is made of sheet and Set 2completed with measuring, protection, indication, monitoring and control facilities for 230Vdc control voltage and that consist of: (1) ON/OFF Discrepancy switch for CB & DS operation

ItemNo.


(2) Indication lamps (or) mechanical indicator for CB and DS status.(3) Annunciation system consists of buzzer for alarm and bell for trip,

24 windows annunciator that can be shown for overcurrent & earth fault relay and unbalance relay operated and trip, CB spring charge position and SF6 gas low alarm and lockout.

(4) Three phase, four wire digital multifunction meter(5) Three phase, three wire static energy meter that can be measured

active and reactive energy.(6) St ti t th h di ti l t & th f lt l(6) Static type, three phase directional overcurrent & earth fault relay

with voltage protection(7) Unbalance relay(8) Time Relay(9) Lockout relay(10) Trip circuit supervision relay(10) Trip circuit supervision relay(11) Test terminal block for protection relays and test switch for meter(12) Other necessary accessories.

7 Lattice Steel Structure - 145 kV Bus Gantry Set 22 Column, 1 Beam (Single Bus), ( g )

8 Overhead wire for 145 kV Bus Gantry m 502 Column, 1 Beam (Single Bus)

9 Earthing Materials Lot 2(1) Earth conductor, (95 sqmm Cu) - 5000 m(2) Earth rod 16 mm, 3 m - 200 Nos(3) Clamps for Earth rod and conductor - 150 Nos(4) Tee clamps for conductor to conductor - 500 Nos(5) Cross joint clamps for conductor - 150 Nos(6) Clamps for conductor to steel structure - 150 Nos(7) Earth clamp for Cu 95 sqmm Gantry tower - 30 Nos(8) Earth connection bus - 30 Nos

10 Control Cable and Accessories for all equipments. Lot 2(1) 4C x 6 sqmm - 3000 m(2) 4C x 4 sqmm - 3000 m

11 Marshalling kiosk including: Set 2

ItemNo.


(1) CT and VT terminal block.(2) Control cable terminal block for GCB, DS, etc.(3) Plug and Socket for maintenance

12 AAC Conductor 795 MCM m 2000

13 Tension and suspension string and necessary clamps and fittings for Lot 2AAC 795 MCM (Single bus, single bundle) for all equipments.

Sr.No.

1 145 kV SF6 Gas Circuit Breaker Outdoor, live tank type(1) M k T b t t d

Technical Specifications for 145 kV, 50 MVar Shunt Capacitor & Switchbay equipments

Reference Specification Unit DPTSC Requipment

(1) Maker To be stated

(2) Country of origin

(3) Type To be stated(4) Conformed standard IEC 62271-100(5) No of pole 3

(6) Type of operation Single Pole

EU Countries, USA, Japan, Korea

(Phase Synchronization Device shall be included.

Installation and commissioning shall be provided

by supplier)

(7) Rated frequency Hz 50

(8) Nominal system voltage kV 132

(9) Hi h l kV 145(9) Highest system voltage kV 145

(10) Rated current A 1600

(11) Short time withstand current kA 40

(12) Rated power frequency withstand voltage kV 275

(13) Rated lightning impulse withstand voltage kV 650

(14) Operation sequence O-0.3s-CO-3min-CO( ) p q

(15) Spring charge mechanism Manual and motor operated

(16) Closing, tripping control voltage and spring VDC 230

charge motor operated voltage

(17) Hot dip galvanized supporting steel structure

with its bolts & nuts, stud bolts & nuts, necessary

accessories and drawing


(2) Country of origin To be stated

(18) Terminal clamps, bolts and nuts


(2) Country of origin To be stated(2) Country of origin To be stated

(19) SF6 bottle (40 kg)



(20) SF6 gas leakage detector



(21) Gas filling kit consist of pressure reducing valve

with two manometers, filling hose and adapter

Sr.No.




2 145 kV Disconnecting Switch without Earth Switch Air Insulated 2 145 kV Disconnecting Switch without Earth Switch Air Insulated



(3) Type Double Break

(4) Conformed standard IEC

(5) Rated frequecy Hz 50



(7) Highest system voltage kV 145

(8) Rated current A 1600


(10) Rated power frequency withstand voltage

(1) Across the isolating distance kV 315(1) Across the isolating distance kV 315

(2) Between pole and earth kV 275

(11) Rated lightning impulse withstand voltage

(1) Across the isolating distance kV 750

(2) Between pole and earth kV 650

(12) DS operation Manual and motor operated(13) Control and motor operated voltage V DC 230

(14) Hot dip galvanized Supporting steel structure with

its bolts & nuts, stud bolts & nuts, necessary

accessories and drawing.


(2) C f i i T b d(2) Country of origin To be stated

(15) Terminal clamps, bolts and nuts



3 145 kV Current Transformer Outdoor, oil immersed tank type



(3) Type To be stated


(5) No of pole Single (One)

, yp


(6) Housing Porcelain

(7) Rated frequency Hz 50


(9) Highest system voltage kV 145

Sr.No.


(10) Rated power frequency withstand voltage kV 275

(11) Rated lightning impulse withstand voltage kV 650


(13) Core-1(13) Core 1

(1) Rated primary current A 200-400

(2) Rated secondary current A 1

(3) Rated burden VA 50

(4) Accuracy class 0.2

(14) Core-2

(1) Rated primary current A 200-400



(4) Accuracy class 0.5

(15) Core-3, 4 and 5

(1) Rated primary current A 200 400(1) Rated primary current A 200-400



(4) Accuracy class 5 P 20

(16) Hot dip galvanized Supporting steel structure

with its bolts & nuts, stud bolts & nuts, necessary accessories and drawing.



(17) Terminal clamps and steel nuts


(2) C f i i T b d(2) Country of origin To be stated

4 145 kV Lightning or Surge Arrestor




Outdoor, metal oxide, gapless type


( ) yp


(5) No of pole Single (One)

(6) Housing Polymer

(7) Rated frequency Hz 50(8) Nominal system voltage kV 132(9) Highest system voltage kV 145

(10) Arrester rated voltage kV 108(11) Line discharge class - 2 (10 kA)(12) Maximum continuous operating voltage kV 86

Sr.No.


(13) Lightning impulse withstand voltage kV 275(14) Hot dip galvanized Supporting steel structure

with its bolts & nuts, stud bolts & nuts, necessary

accessories and drawingaccessories and drawing.



(15) Terminal clamps and steel nuts



5 145 kV, 10 MVar Shunt Capacitor

(1) 145 kV Shunt Capacitor


(2) Country of origin EU Countries, USA, Japan, Korea

(3) Place of Manufacturer To be stated(3) Place of Manufacturer To be stated

(4) Type Shunt Capacitor

(5) Standard IEC

(6) System nomial Voltage kV 132

(7) System highest Voltage kV 145

(8) 3 Phase Capacity at nominal voltage level MVar 50(9) Rated Frequency Hz 50

(10) Protection Method Neutral Current Transformer

(11) Fusing Fuseless

(12) Power frequency withstand Voltage kV 275

(13) Lightning Impulse withstand Voltage kV 650

(14) C i b k fi i U d d d bl (14) Capacitor bank configuration Ungrounded double wye

(15) Number of series group s To be stated

(16) Parallel capacitor unit per series p To be stated

(17) Number of capacitor unit per 1 unit pcs To be stated

(2) Current Limiting Reactor

(1) Maker To be stated( )


(3) Type Air Core

(4) Standard IEC

(5) System nominal Voltage kV 132

(6) System highest Voltage kV 145

(7) Rated voltage of current limiting Reactor kV To be stated

(8) Rated Frequency Hz 50



Sr.No.


(3) Capacitor Unit


(2) Country of origin EU Countries USA Japan Korea(2) Country of origin EU Countries, USA, Japan, Korea

(3) Type Fuseless

(4) Standard IEC

(5) Rating in each unit kVar To be stated

(6) Rated voltage in each unit kV To be stated

(7) Capacitance μF To be stated


(9) Capacitor Losses W/KVar To be stated

(10) Dielectric Polypropylene film

(11) Dielectric Fluid Non PCB

(12) Material of casing Stainless steel(5 Spare units shall be included)

(4) Neutral Current Transformer



(3) Type Oil Filled

(5 Spare units shall be included)

(4) Standard IEC

(5) Rated Voltage kV 132


(7) Current ratio

-Primary A 5

S d A 5-Secondary A 5




(5) Post Insulator( )



(3) Type Porcelain

(4) Standard IEC

(4) Cantilever Strength kN To be stated

(5) Creepage distance level mm To be stated

(6) Shed Diameter mm To be stated

(7) Post Insulator Length mm To be stated


Sr.No.



(6) Terminal Clamps

Maker To be statedMaker To be stated

Country of Origin To be stated

6 145 kV control & relay panel for Shunt Capacitor

(1) Enclosure




(4) Sheet thickness > 2mm

(5) Enclosure Size mm 2100 x 800 x 800

(6) Coating colour Cement gray

(7) Coating thickness μm 50 86(7) Coating thickness μm 50 ~ 86

(2) Discrepancy switch




(3) Annunciation system with (24)windows(1) Maker To be stated



(4) Three phase four wire digital multifunction meter



(3) Technical Specification According to the appendix-A

(5) Three phase three wire static energy meter


(2) C f i i EU C i USA J K(2) Country of origin EU Countries, USA, Japan, Korea

(3) Technical Specification According to the appendix-B

(6) Static type, three phase directional overcurrent

and earthfault relay with voltage protection

(1) Maker Schneider( )

(2) Country of origin EU Countries

(3) Type Micom - P127BA2Z512FE1

(7) Unbalance relay

Sr.No.


(1) Maker Nokian

(2) Country of origin EU Countries, USA

(3) Type NUR-36

(8) Time Relay(8) Time Relay

(1) Maker Siemens (SIRIUS)

(2) Country of origin Germany

(3) Type 3RP15 25-1BW30

(9) Lockout relay

(1) Maker Schneider/Alstom/Siemens/ABB


(10) Trip circuit supervision relay



(11) Test terminal block for protection relays and

test switch for meter

EU Countries, USA, Japan, Korea, Thailand


test switch for meter



(12) Other necessary accessories. Must be included

7 145 kV Bus Gantry



(2) Country of Origin Korea, Japan, Malaysia, India

(3) System Voltage kV 132

(4) Type Lattice

(All members shall be fully hot-dip Galvanized)

(5) F d i b l d i M b i l d d(5) Foundation bolts, nuts and necessary accessories Must be included

(6) Foundation Drawing including stud bolt Required

and necessary materials

(7) Inspection Certificate Required

8 Overhead earth wire system y

GI wire(7/10)



(3) Sectional area of wire mm2 50

(4) Numbers of strand Nos 7

(5) Breaking load N/m To be stated

(6) Weight kg/km To be stated

(7) Other necessary accessories Must be included

Sr.No.


9 Earthing system

(1) Stranded copper conductor


(2) Country of origin Thailand Singapore Malaysia(2) Country of origin Thailand, Singapore, Malaysia


(4) Size mm2 95

(5) Stranding No/dia 19/2.52

(6) Weight kg/m 1.0

(2) Threaded Copper bonded earth rod


(2) Country of origin EU counties, USA, Japan, Korea


(4) length m 3

(5) Nominal diameter in:mm 5/8:16

(6) Weight kg 3 79(6) Weight kg 3.79

(3) Clamps



(3) Nominal rod diameter m 16

(4) Max: Conductor mm2 35-95(5) Weight kg 0.06

(4) T-Clamps for conductor to conductor



(3) Max: Conductor mm2 95

(5) C l f d(5) Cross clamps for conductor



(3) Max: Conductor mm2 95

(6) Clamp for conductor to steel structure

(1) Maker To be stated( )


(3) Conductor size range mm2 70~120

(4) Material - Gun metal

(5) Weight kg 0.22

(7) Tower earth clamps



(3) Conductor size range mm2 70~120

(8) Earth connection bus

Sr.No.




(3) Copper bar (HBDC Copper) mm 50x6

(4) Other necessary accesssories Must be included(4) Other necessary accesssories Must be included

10 0.6/1kV PVC Insulated, copper wire braided shield,

stranded copper wire and termination accessories.

Control Cable

(1) 4C x 6 mm2 To be stated

(1) Maker EU counties, USA, Japan, Korea



(4) Nominal sectional area mm2 To be stated

(5) No. & Diameter of wire No./mm To be stated

(6) Outer diameter mm To be stated(6) Outer diameter mm To be stated

(7) Insulation thickness mm To be stated

(8) Shealth thickness mm To be stated


(10) Cable Marking To be stated

(Type of cable, Manufacturer's name, Year of manufacture and length printed per one meter

interval on the surface of the outer sheath )

(11) Packing Must be Steel Drum

(Sealed the both ends of cable by means of (500m/1Drum)

a suitable method)

(2) 4C x 4 mm2 To be stated

(1) Maker EU counties, USA, Japan, Korea



(4) Nominal sectional area mm2 To be stated( ) mm(5) No. & Diameter of wire No./mm To be stated

(6) Outer diameter mm To be stated

(7) Insulation thickness mm To be stated

(8) Shealth thickness mm To be stated


(10) Cable Marking To be stated

(Type of cable, Manufacturer's name, Year

of manufacture and length printed per one meter

interval on the surface of the outer sheath )

Sr.No.


(11) Packing Must be Steel Drum

(Sealed the both ends of cable by means of (500m/1Drum)

a suitable method)

11 Marshalling Kiosk

(1) Enclosure



(3) Type Outdoor

(4) Metal sheet type Electro galvanized iron

(5) Sheet thickness mm > 2

(6) Cable entrance hole(1.5" Dia) Nos 6

(7) Paint Epoxy

(8) Size mm 800W x 1500H x 400 B

(9) Degree of protection IP 55(9) Degree of protection IP-55

(2) 2 x 12 poles 25A molded terminal block, suitable

for 4 mm2 cable terminated on both side(1) Maker To be stated


(3) Type To be stated(4) Standard IEC

(3) 4 x 12 poles and 4 x 4 poles 25A molded terminal

block, suitablefor 2.5 mm2 cable terminated on bothside




(4) Standard IEC

(4) Plug & socket


(2) C t f i i EU ti USA J K(2) Country of origin EU counties, USA, Japan, Korea


(4) Standard IEC

(5) 1P, 6A (4)Nos, 2P, 20A (1)No Miniacture circuit

breaker

(1) Maker To be stated(1) Maker To be stated



(4) Standard IEC

Sr.No.


(6) 80 watt, 230V space heater



(3) T T b t t d(3) Type To be stated

(4) Standard IEC

(7) Thermostat (30'C ~ 80'C)



(3) Type To be stated(3) Type To be stated

(4) Standard IEC

12 AAC 795 MCM conductor


(2) Country of origin EU counties, USA, Japan, Korea( ) y g , , p ,

(3) Standard To be stated

(4) Type of Conductor To be stated

(5) Code Name To be stated

(6) Number of Wire Strand To be stated

(7) Diameter of Wire mm To be stated(8) Diameter of Conductor mm To be stated

(9) Mass of Conductor kg/m To be stated

(10) Nominal breaking load kN To be stated

(11) DC Resistance at 20°C ohm/km To be stated

(12) Current carrying capacity at 35°C ambient A To be stated

temperature and 80°C conductor temperaturetemperature and 80 C conductor temperature

(13) Weight per drum To be stated

(14) Chemical Composition % To be stated

13 Tension and Suspension String, Clamps and Fitting,

Insulator Assembly Clamp & Fitting for AAC 795 MCM




Insulator


(2) Country of Origin To be stated(2) Country of Origin To be stated


Spacer and other neccessary accessories for overhead

bus and equipment connection

Sr.No.



(2) Country of Origin To be stated

EU Countries -Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, UK, Italy, Latvia,

Lithuania, Luxembourg, Malta, Netherlands, Poland, Estonia, Finland, France,

Germany, Greece, Hungary, Ireland, Austria, Belgium, Bulgaria, Croatia,

Cyprus, Czech Republic, Denmark

Appendix-A

Technical Specifications of Panel Mounted Three Phase-Four Wire,

Digital Multifunction Meter

1.Model or Type -Elite 440/ Diris A40

2.Maker -CEWE/ SOCOMEC

3.Country of Origin -Sweden/France

4.Conformed Standard -IEC 62053

5.Rated Input Voltage -110 VAC (L-L)/63.5 VAC (L-N)

6.Rated Input Cuttent -1A (or) 5A

7.Rated Frequency -50Hz

8. Accuracy Class -0.5 s for all electrical parameter

9. Auxiliary Supply Voltage -110 VAC (L-L)/63.5 VAC (L-N) fixed

(or) must be included the auxiliary

voltage range.

10.Communication Interface - RS 485 and Ethernet

Protocol - Modbus

11.Measurement Value - (i) Voltage - VL-L(L1-L2, L2- L3, L3-

L1)(kV)

(In Primary Value) - VL-N(L1-N, L2- N, L3- N)(kV)

(ii) Ampere – (L1,L2,L3)(A)

(iii) Frequency (Hz)

(iv) Three phase active power (W)

(v) Three phase reactive power (Var)

(vi) Three phase apparent power (VA)

(vii) Three phase power factor (PF)

(viii) Three phase active energy (±Wh)

(ix) Three phase reactive energy (±Varh)

(x) Maximum watt demand

(xi) Maximum current demand

12.CT Ratio (or) Rated Primary and Secondary currents of the current transformer must

be programmed.

13.For above item No(12), set by DIP switch is not accepted.

14.Day light reading Liquid Crystal Display (or) LED Display.

Appendix-B

Technical Specification For CT/PT Operated Energy Meter

(1) Maker - Landis

- CEWE

- Ester

(2) Country of Origin - Switzerland (for Landis)

- UK (for CEWE)

- Germany (for Ester)

(3) Type of Meter - Three Phase Four Wire Programmable

for item No.(1) and No.(2), Other type

and other country of origin in the same

brand is not accepted.

(4) Design and construction - Panel Mounted Type

(5) Rated Current - 1A (for 1A CT)

- 5A (for 5A CT)

(6) Rated Voltage - 110Vac (L-L)

- 63.5Vac (L-N)

(7) Rated Frequency - 50Hz

(8) For item No.(5), (6), (7) the value of current, voltage and frequency with which the

relevant performance of the meter is fixed. If these value are not exactly value or

different value, the meter is not accepted.

Example, 1.5A (for 1 A CT operated meter)

5-10A (for 5A CT operated meter)

1-10A (for 1A/5A CT operated meter)

100Vac (L-L)

57.7Vac (L-N)

(9) Maximum Current (Imax) - Should be stated

(10) Short time Current - The meter shall be able to carry for 0.5s a

current equal to 20Imax with a relative

tolerance of IEC 62053-22

(11) Power Consumption per Phase

Voltage Circuit - Voltage Circuit < 0.1VA/phase

Current Circuit - Current Circuit < 0.1VA/phase@1A

Ibasic, < 0.5VA/phase @ 5A Ibasic.

Auxiliary Supply -Auxiliary APS < 1

(12) Accuracy Class of Meter -

Accuracy class

Active energy measurement, Active Energy: 0.2s (As per IEC 62053-22 standard)

Reactive energy measurement, Reactive Energy: 0.2s

(13) For item No.(12) must be satisfy the limits of the permissible percentage error as

defined in the IEC 62053-22.

(14) Limits of error due to variation of current must be satisfy as defined in the table 4 and 5

of IEC 62053-22.

(15) Limits of error due to variation of voltage and frequency must be satisfy as defined in

the table 6 of IEC 62053-22.

(16) Limits of error due to influence quantities must be satisfy as defined in table 6 of IEC

62053-22.

(17) Initial start-up - Shall be functional within 5S after the

reference voltage is applied.

(18) No Load Condition - Shall not produce more than one pulse

minimum test period shall be as defined

in IEC 62053-22.

(19) Starting - Shall start and continue to register at

0.001 In.

(20) Display LCD - Minimum 8 digits with 2 decimals

(xxxxxx.xx)

(21) Communication Interface -

The meter shall have following four - IEC 1107 optical port

RS232 Serial communication port - RS232 serial communication port

RS485 port (should be configurable on) - RS485 port (should be configurable on

DLMS/MODBUS)

TCP/ IP Ethernet (should work - TCP/ IP Ethernet (should work

Simultaneously on DLMS TCP/ MODBUS TCP) Simultaneously on DLMS TCP/

MODBUS TCP)

(22) Protocol - Modbus/ DLMS/ TCP/ IP

(23) Case - shall have a case which can be sealed.

The mechanical strength of case shall be

as defined in IEC 62052-11.

(24) Window - Shall be transparent material.

(25) Terminal Block - Shall be arranged for bottom connection

with minimum two screw for each

conduction. The clearances and creepage

distance of between terminal shall be not

less than the value specified in Table 3a

of IEC 62052-11.

(26) Terminal Cover - Shall have a separate cover which can be

sealed enclose the actual terminal, the

conductor fixing screws.

(27) For item No. (25), (27) and (28) should not be ignited by thermal overload of live parts.

(28) Degree of protection - Shall conform to the degree of protection

IP 51 for Indoor meter and IP 54 for

outdoor meter,

(29) Display of measured value - measured value shall be the following-

(a) kilowatt hour (kWh) or megawatt

hour (MWh) in bi-directional.

(b) kilovar hour (kvar) or megavar hour

(Mvar) in bi-directional.

(c) kilovolt ampere hour (kvAh) or

megavolt ampere hour (MvAh) in bi-

directional.

(d) reverse directional indicator.

(e) battery low indicator.

(f) communication indicator.

(g) power factor for each phase and

average.

(h) phase voltage for each phase.

(i) phase current for each phase.

(j) Network frequency.

(k) indicator flashes when there is failure

in the electronic components, meter

malfunction, any other error.

(30) For item (29), display of measured value can be programmable in autocyclic and

manualcyclic.

(31) Optical Test Output - Shall be accessible from the front and

maximum pulse frequency shall not

exceed 2.5kHz.

(32) Name Plate Data - Shall be included the following

information.

(a) manufacturer’s name or trade mark.

(b) place of manufacture.

(c) designation of type.

(d) space for approval mark.

(e) the number of phase and wires (may

be replaced by graphical symbols).

(f) the serial number

(g) year of manufacture.

(h) the reference voltage

(i) the rated current

(j) the maximum current .

(k) the reference frequency.

(l) the meter constant.

(m) the class index of the meter.

(n) the reference temperature

(o) the reference standard.

(p) the bar code.

(q) certificate of Europe (CE) Mark.

(33) Connection diagrams - Shall be included on the terminal cover.

(34) Maximum, temperature range - + 70 ° C

(35) Protection against solar radiation - Shall withstand solar radiation.

(36) Voltage dips and short interruption - Shall not produce a change in the

registerof more than X units.

X = 10-6 m Un Imax

- The register of the meter shall have a

resolution of at least 0.01 units.

(37) Electromagnetic compatibility - Shall be designed in such a way that

conducted or radiated electromagnetic

phenomena and electrostatic discharge

neither demage nor substantially

influence the result of measurement.

(38) TOU compatibility - Yes, 8 TOU Tariffs, 16 Seasons, 16 day

types and 16 time zones, 53 billing dates.

(39) MD Reset provisions - Both Options available

. Auto

. Manual

(40) Demand integration period - Programmable (5,10,15,20,30 & 60)

(41) Logger parameters recorded in meter - 50 parameter per logger, 2 logger in

meter.

- 960 days for 10 parameter at 30 minutes

integration period.

(42) Facility of external CT/VT error compensation- Yes,

(43) Anomaly detection features - Yes, (Temper detection)

(44) Pulse input/output - 4 Pulse Input Output Programmable,

+7 Pulse Output Programmable.

(45) Alarms - 50+ Alarms & 10+ compartments for

event logging

(46) Internal Memory Size - 8 MB

(47) Accessories - Panel Mounting kit, Configuration

software and optical cable (one for each

substation)

(48) Sample of meter submitted - at least 3 Nos. of sample for each type

shall be visual checked and tested after

data offered.

(49) Acceptance condition after meter offered - If acceptance test by random selection

for provided units to meet the function

required is failed, should replace

supplied with another new batch for

acceptance test.

(50) AC/ DC Auxiliary supply ratings for - 60-240VAC-DC ± 20%, 50/ 60Hz

power up the metering system and self.

Page 2 of 7 - moee.gov.mm Tender Form Full Budg.cc.pdf ·...

Documents

Transcript of Page 2 of 7 - moee.gov.mm Tender Form Full Budg.cc.pdf ·...