OptiX RTN 600

8/3/2019 OptiX RTN 600

http://slidepdf.com/reader/full/optix-rtn-600 1/6

8/3/2019 OptiX RTN 600


Deploy Your Networklized Microwave Radio

Transmission Solution

To Build a Future-Oriented, Operable, Manageable,

and Flexible Microwave Radio Transmission Network

To Reduce Network CAPEX and OPEX

•

•

•

8/3/2019 OptiX RTN 600


Product Features

Seamless Integration Between Radio and Fiber Transmission

The RTN 600 can be deployed as microwave radio transmission equipment, optical transmission

equipment, or radio and ber hybrid transmission equipment.

The RTN 600 uses the same network management system as other Huawei optical network products,

allowing for end-to-end service provisioning and management.

•

•

The OptiX RTN 600 radio transmission system (hereinafter referred to as the RTN 600) is a digital microwave

radio transmission system developed by Huawei Technologies Co., Ltd. based on extensive experience in thetransport eld and a comprehensive understanding of transport network solutions. The modular design of

the RTN 600 allows for rich service interfaces, networking exibility, software-programmable capacity, easy

installation and maintenance, and easy upgrade and expansion capabilities. With these superior features,

the RTN 600 can be widely applied for base station backhaul and broadband service access. With the recent

joining of the RTN 600 located at the access layer of a transmission network, the Huawei OptiX product

portfolio provides a complete and seamless transport solution.

The RTN 600 is a split-mount, software programmable, PDH/SDH compatible radio transmission system that

integrates both radio and ber transmission. Currently, the RTN 610 and RTN 620 are the two types of the

RTN 600 series designed for various application scenarios. Common software and hardware platforms are

used across the RTN 600 series. The boards are compatible. Four RF directions are supported, with each

direction having a software-programmable capacity ranging from 4xE1 to 1xSTM-1.

OptiX RTN 600 Radio Transmission System

RTN 610 RTN 620

8/3/2019 OptiX RTN 600


Built-in MADM

One RTN 600 supports multiple RF directions.

Enhanced exibility in PDH/SDH ring networking.

Full timeslot cross-connection in any direction.

Quick service provisioning and adjustment.

No external ADM is necessary, and lesser DDFs, external cable connections, and IDU service interface units.

Radio-Based MSTP

A single platform supports PDH, SDH, Ethernet, and hybrid transmission of multiple services.A common platform with Huawei optical network MSTP equipment, enabling the RTN 600 to transmit

or terminate services carried by other Huawei optical network products and upgrade to support more

new services.

Future-Oriented Design

Agile modulation: A single modulation/demodulation unit supports selectable modulation rates from

QPSK to 128QAM. The frequency bandwidth is software programmable from 3.5 MHz to 28 MHz.

Upgradable from PDH to SDH: Transmission capacity of a single RF is software programmable from

4xE1 to 1xSTM-1.

Upgradable from radio transmission to fiber transmission: When the IF board is replaced with an

optical board, the radio transmission equipment can function as optical transmission equipment for

providing higher transmission capacity.

Modular design: Modules are exibly congured depending on varied services and application scenarios.

Powerful Clock Processing Capability

Supports the extraction of the clock source from line, tributary, radio, and external clock signals.

Supports the synchronization status message (SSM) protocol and the extended SSM protocol.

Supports the retiming function of the tributary.

•

•

•

•

•

•

•

•

•

•

•

•

•

•

8/3/2019 OptiX RTN 600


Complete Protection Mechanism

Supports 1+1 FD/SD/HSB protection.

Supports SNCP between optical links, between radio links, or between optical links and radio links.

Supports 1+1 backup for the clock module and ADM module.

Supports 1+1 backup for the internal power module, and supports two inputs of external power supply.

Easy Installation

Light and highly integrated.

The IDU can be installed on the wall, on the desktop, in a 19-inch cabinet, in an open shelf, or in a 300

mm ETSI cabinet.

The ODU can be mounted as an integral part of the antenna.

Easy Maintenance

Supports board-level maintenance.

All the boards are hot swappable.

Replacing the system control and communication (SCC) board does not interrupt services.

Supports ash cards for easy service provisioning and SCC board replacement.

•

•

•

•

•

•

•

•

•

•

•

Huawei's Total Solution for Mobile Backhaul

Access Access HUB Metro

RTNRTN

OSN

NMS

RTN RTN RTNPrivate

RTN

RTN

RTN

RTN

RTN

BTS

Node B

Node B

8/3/2019 OptiX RTN 600


Technical Specifcations

HUAWEI TECHNOLOGIES CO., LTD.

Add: Huawei Industrial Base

Bantian Longgang

Shenzhen 518129, P.R. China

Tel: +86-755-28780808

Version No.: M3-040030-20070330-C-1.0

www.huawei.com

Frequency Band (GHz) 7 8 11 13 15 18 23 26 38

Frequency Range (GHz)7.114 to7.897

7.731 to8.496

10.700 to11.700

12.751 to13.248

14.501 to15.257

17.685 to19.710

22.000 to23.608

24.549 to26.453

37.044 to39.452

Channel Spacing (MHz) 3.5, 7, 14, 28Standard/High-power Nominal

Maximum OutputPower (dBm)

QPSK 25.5/30.0 25.5/30.0 24.5 24.5 24.5 24 22.5 22 20.5

16QAM 21.0/28.0 21.0/28.0 20 20 20 20 19 18 16

128QAM 15.0/24.0 15.0/24.0 14 14 14 14 13 12 10

Receiver SensitivityRSL@ BER=10-6

(dBm)

4xE1QPSK -91.5 -91.5 -91.0 -91.0 -91.0 -91.0 -90.5 -90.0 -88.5

16QAM -87.5 -87.5 -87.0 -87.0 -87.0 -87.0 -86.5 -86.0 -85.5

8xE1QPSK -88.5 -88.5 -88.0 -88.0 -88.0 -88.0 -87.5 -87.0 -85.5

16QAM -84.5 -84.5 -84.0 -84.0 -84.0 -84.0 -83.5 -83.0 -81.5

16xE1QPSK -85.5 -85.5 -85.0 -85.0 -85.0 -85.0 -84.5 -84.0 -82.5

16QAM -81.5 -81.5 -81.0 -81.0 -81.0 -81.0 -80.5 -80.0 -78.5

STM-1 128QAM -70.5 -70.5 -70.0 -70.0 -70.0 -70.0 -69.5 -69.0 -67.5

Nominal Minimum Output Power (dBm) –4

Tx Frequency Stability (ppm) ±5

Interface Type

SDH InterfaceSTM-1 optical interface: Ie-1, S-1.1, L-1.1, L-1.275-ohm STM-1 electrical interface

PDH Interface 75-ohm /120-ohm E1 interface

Ethernet Interface 10M/100M BASE_T(x) interface

Alarm Interface External alarm input/output interface

Interface Capacity

STM-1 optical interface: 1xSTM-1 to 10xSTM-1

STM-1 electrical interface: 1xSTM-1 to 10xSTM-1PDH interface: 4xE1 to 64xE1Ethernet interface: 4xFE to 16xFEAlarm interface: 6 inputs + 2 outputs

RF DirectionRTN 610: one directionRTN 620: up to four directions

CongurationRTN 610: 1+0RTN 620: 1+0/1+1/2+0/East-west/Hub node (max. 4 ODUs)

Dimensions andWeight

IDU

RTN 610:Dimensions: 442 mm (width) x 44 mm (height) x 215 mm (depth)

Weight: < 4 kgRTN 620:Dimensions: 442 mm (width) x 87 mm (height) x 215 mm (depth)Weight: < 8 kg

ODUDimensions: 260 mm (width) x 260 mm (height) x 92 mm (depth)Weight: < 5 kg

Typical PowerConsumption

IDURTN 610 < 35 WRTN 620 < 78 W

ODU < 40 W

Ambient

Temperature

IDU –5°C to +50°C

ODU –35°C to +55°C

Power Supply –38.4 V to –72 V

Equalization Time domain equalization

Heat DissipationRTN 610: natural heat dissipationRTN 620: intelligent fans (when the ambient temperature is low, the RTN 620 adopts natural heat dissipation.)

HumidityIDU: 5% to 95%

ODU: 5% to 100%

Altitude (Operational) 4,500 meters (15,000 ft)

OptiX RTN 600

Documents

Transcript of OptiX RTN 600